January 2021 - U-Boot

[PATCH 0/3] arm: mvebu: Espressobin: Set default env values at runtime
by Pali Rohár 08 Feb '21

08 Feb '21

This patch series set default env values of $fdtfile and $ethNaddr for Espressobin board at runtime. It fixes two main issues on Espressobin board that 'env default -a' completely erases permanent board MAC addresses and also erase $fdtfile variable which is needed for booting Linux kernel via distro boot. Lot of people were complaining about erasing permanent MAC addresses by U-boot on this board and due to this issue some linux distributions started using static hardcoded MAC addresses for all Espressobin boards to workaround this issue. Apparently erase of MAC addresses or usage of static hardcoded value caused more issues on network (e.g. inability to connect two of these boards to the same network). Pali Rohár (3): env: Allow to set default_environment[] from board code via compile option DEFAULT_ENV_IS_RW arm: mvebu: Espressobin: Set default value for $fdtfile env variable arm: mvebu: Espressobin: Set default value for $ethNaddr env variable board/Marvell/mvebu_armada-37xx/board.c | 41 ++++++++++++++++++++----- include/configs/mvebu_armada-37xx.h | 17 +++++++++- include/env_default.h | 2 ++ include/env_internal.h | 4 +++ 4 files changed, 56 insertions(+), 8 deletions(-) -- 2.20.1

3 14

[PATCH v3 00/11] tpm: Support using TPM1 and TPM2 from a single API
by Simon Glass 07 Feb '21

07 Feb '21

At present if an application wants to be written so it can work with both TPMv1.2 and TPM2 it must use two different APIs. This is inconvenient since it requires adding code to deal with the mismatch between the two. It would be better to have a common API that all boards could share. This series provides a simple API the covers some basic features and implements them for both TPM standards. Changes in v3: - Add a comment to the offset and fix up the value Changes in v2: - Add comments for the offset value - Add definition of TPM2_RC_NV_DEFINED return code Simon Glass (11): tpm: Don't include cr50 in TPL/SPL tpm: Use logging in the uclass tpm: Add debugging of request in tpm_sendrecv_command() tpm: Add an API that can support v1.2 and v2 tpm: Switch TPMv1 over to use the new API tpm: Add a basic API implementation for TPMv2 tpm: Reduce duplication in a few functions tpm: Add an implementation of define_space tpm: Add TPM2 support for read/write values tpm: Add TPM2 support for write_lock tpm: Allow disabling platform hierarchy with TPM2 board/gdsys/a38x/controlcenterdc.c | 4 +- board/gdsys/a38x/hre.c | 28 +-- board/gdsys/a38x/keyprogram.c | 8 +- board/gdsys/mpc8308/gazerbeam.c | 4 +- board/gdsys/p1022/controlcenterd-id.c | 36 +-- cmd/tpm-v1.c | 25 +- cmd/tpm_test.c | 40 ++-- drivers/tpm/Makefile | 2 +- drivers/tpm/cr50_i2c.c | 4 +- drivers/tpm/tpm-uclass.c | 8 +- include/tpm-common.h | 3 + include/tpm-v1.h | 76 +++--- include/tpm-v2.h | 81 +++++++ include/tpm_api.h | 322 ++++++++++++++++++++++++++ lib/Makefile | 1 + lib/tpm-common.c | 11 +- lib/tpm-v1.c | 115 +++++---- lib/tpm-v2.c | 203 +++++++++++++++- lib/tpm_api.c | 285 +++++++++++++++++++++++ 19 files changed, 1073 insertions(+), 183 deletions(-) create mode 100644 include/tpm_api.h create mode 100644 lib/tpm_api.c -- 2.30.0.280.ga3ce27912f-goog

2 23

[PATCH v1] fix patman --limit-cc option
by Bernhard Kirchen 07 Feb '21

07 Feb '21

patman's --limit-cc option parses its argument to an integer and uses that to trim the list of CC recipients to a particular maximum. but that only works if the cc variable is a list, which it is not. Signed-off-by: Bernhard Kirchen <bernhard.kirchen(a)mbconnectline.com> --- tools/patman/series.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/patman/series.py b/tools/patman/series.py index a6746e87c4..41a11732fc 100644 --- a/tools/patman/series.py +++ b/tools/patman/series.py @@ -271,7 +271,7 @@ class Series(dict): cc += get_maintainer.GetMaintainer(dir_list, commit.patch) for x in set(cc) & set(settings.bounces): print(col.Color(col.YELLOW, 'Skipping "%s"' % x)) - cc = set(cc) - set(settings.bounces) + cc = list(set(cc) - set(settings.bounces)) if limit is not None: cc = cc[:limit] all_ccs += cc -- 2.29.2

2 2

[PATCH] gpio-uclass: fix gpio flags save condition
by Kory Maincent 06 Feb '21

06 Feb '21

The commit cd2faeba1a moves the location where we save the flags to the gpio descriptor but it adds a "!" character. This breaks the condition we expect to save the flags. Signed-off-by: Kory Maincent <kory.maincent(a)bootlin.com> --- drivers/gpio/gpio-uclass.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c index 0c01413b58..39db89c004 100644 --- a/drivers/gpio/gpio-uclass.c +++ b/drivers/gpio/gpio-uclass.c @@ -650,7 +650,7 @@ static int _dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong flags) } /* save the flags also in descriptor */ - if (!ret) + if (ret) desc->flags = flags; return ret; -- 2.17.1

3 5

[PATCH v2 0/4] doc: update Kernel documentation build system
by Heinrich Schuchardt 06 Feb '21

06 Feb '21

Update the documentation build system according to Linux v5.11-rc1. Deactive the automarkup.py extension module which on Gitlab CI is incompatible with Unicode. With this patch we can build the HTML documentation using either of Sphinx 2 and Sphinx 3. Fix two non-conformant documents. Heinrich Schuchardt (4): doc: board: fix Microchip MPFS Icicle Kit doc doc: fix doc/develop/logging.rst .gitlab-ci: install doc/sphinx/requirements.txt doc: update Kernel documentation build system .azure-pipelines.yml | 6 +- .gitlab-ci.yml | 3 + doc/api/index.rst | 1 + doc/api/logging.rst | 6 + doc/board/microchip/mpfs_icicle.rst | 51 ++-- doc/conf.py | 141 +++++++-- doc/develop/logging.rst | 13 +- doc/sphinx/automarkup.py | 290 ++++++++++++++++++ doc/sphinx/cdomain.py | 93 +++++- doc/sphinx/kernel_abi.py | 194 ++++++++++++ doc/sphinx/kernel_feat.py | 169 +++++++++++ doc/sphinx/kerneldoc.py | 15 +- doc/sphinx/kernellog.py | 6 +- doc/sphinx/kfigure.py | 6 +- doc/sphinx/load_config.py | 27 +- doc/sphinx/maintainers_include.py | 197 ++++++++++++ doc/sphinx/parallel-wrapper.sh | 33 ++ doc/sphinx/parse-headers.pl | 6 +- doc/sphinx/requirements.txt | 5 +- scripts/kernel-doc | 450 +++++++++++++++++++++------- 20 files changed, 1527 insertions(+), 185 deletions(-) create mode 100644 doc/api/logging.rst create mode 100644 doc/sphinx/automarkup.py create mode 100644 doc/sphinx/kernel_abi.py create mode 100644 doc/sphinx/kernel_feat.py create mode 100755 doc/sphinx/maintainers_include.py create mode 100644 doc/sphinx/parallel-wrapper.sh -- 2.29.2

3 11

[PATCH v2 0/2] Console/stdio use after free
by Nicolas Saenz Julienne 05 Feb '21

05 Feb '21

With today's master, 70c2525c0d3c ('IOMUX: Stop dropped consoles') introduces a use after free in usb_kbd_remove(): - usbkbd's stdio device is de-registered with stdio_deregister_dev(), the struct stdio_dev is freed. - iomux_doenv() is called, usbkbd removed from the console list, and console_stop() is called on the struct stdio_dev pointer that no longer exists. This series mitigates this by making sure the pointer is really a stdio device prior performing the stop operation. It's not ideal, but I couldn't figure out a nicer way to fix this. Regards, Nicolas --- Changes since v1: - Comment new function - Add comment stating this needs a proper fix Nicolas Saenz Julienne (2): stdio: Introduce stdio_valid() console: Don't start/stop console if stdio device invalid common/console.c | 9 +++++++++ common/stdio.c | 11 +++++++++++ include/stdio_dev.h | 11 +++++++++++ 3 files changed, 31 insertions(+) -- 2.30.0

6 14

[PATCH v2 00/12] Add support for pinmux status command on beaglebone
by Dario Binacchi 05 Feb '21

05 Feb '21

The series was born from the need to check the pinmux setting of a peripheral on a beaglebone board. I then ran the 'pinmux status -a' command but it failed because some operations (get_pin_muxing, get_pin_name and get_pins_count) were missing in the 'pinctrl-single' driver. The patch series can be cleanly applied to the HEAD of the master which at the time of release points to 8b195f4b71 ("Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell") commit Changes in v2: - Added Simon Glass review tag. - Updated commit message. - Added Simon Glass review tag. - Added Pratyush Yadav review tag. - Updated commit message - Split in 2 commits - Check dev_read_addr_size return value - Updated commit message. - Added Simon Glass review tag. - Updated commit message. - Remove pointer to access functions. - Added Simon Glass review tag. - Added Simon Glass review tag. - Added Simon Glass review tag. - Added error checking when the 'width' property is missing. - Fix coding style. Dario Binacchi (12): pinctrl: single: fix format of structure documentation pinctrl: single: fix the loop counter variable type pinctrl: single: fix offset management pinctrl: single: fix debug messages formatting pinctrl: single: get register area size by device API pinctrl: single: check "register-width" DT property pinctrl: single: change function mask default value pinctrl: single: add register access functions pinctrl: single: add get_pins_count operation pinctrl: single: add get_pin_name operation pinctrl: single: add get_pin_muxing operation test: pinmux: add test for 'pinctrl-single' driver arch/sandbox/dts/test.dts | 72 +++++ configs/sandbox_defconfig | 1 + drivers/pinctrl/pinctrl-single.c | 474 +++++++++++++++++++++++++++---- test/dm/pinmux.c | 91 +++++- 4 files changed, 573 insertions(+), 65 deletions(-) -- 2.17.1

5 22

[PATCH] mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output
by haibo.chen＠nxp.com 05 Feb '21

05 Feb '21

From: Haibo Chen <haibo.chen(a)nxp.com> For FSL_USDHC, it do not implement VENDORSPEC_CKEN/PEREN/HCKEN/IPGEN, these are reserved bits. Instead, use VENDORSPEC_FRC_SDCLK_ON to gate on/off the card clock output. After commit b5874b552ffa ("mmc: fsl_esdhc_imx: add wait_dat0() support"), we meet SD3.0 card can't work at UHS mode, mmc_switch_voltage() fail because the second mmc_wait_dat0 return -ETIMEDOUT. According to SD spec, during voltage switch, need to gate off/on the card clock. If not set the FRC_SDCLK_ON, after CMD11, hardware will gate off the card clock automatically, so card do not detect the clock off/on behavior, so will draw the data0 line low until next command. Fixes: b5874b552ffa ("mmc: fsl_esdhc_imx: add wait_dat0() support") Signed-off-by: Haibo Chen <haibo.chen(a)nxp.com> --- drivers/mmc/fsl_esdhc_imx.c | 29 +++++++++++++++++++++-------- include/fsl_esdhc_imx.h | 2 ++ 2 files changed, 23 insertions(+), 8 deletions(-) diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c index 8ac859797f..da33ee8253 100644 --- a/drivers/mmc/fsl_esdhc_imx.c +++ b/drivers/mmc/fsl_esdhc_imx.c @@ -653,7 +653,10 @@ static void set_sysctl(struct fsl_esdhc_priv *priv, struct mmc *mmc, uint clock) clk = (pre_div << 8) | (div << 4); #ifdef CONFIG_FSL_USDHC - esdhc_clrbits32(&regs->vendorspec, VENDORSPEC_CKEN); + esdhc_clrbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON); + ret = readx_poll_timeout(esdhc_read32, &regs->prsstat, tmp, tmp & PRSSTAT_SDOFF, 100); + if (ret) + pr_warn("fsl_esdhc_imx: Internal clock never gate off.\n"); #else esdhc_clrbits32(&regs->sysctl, SYSCTL_CKEN); #endif @@ -665,7 +668,7 @@ static void set_sysctl(struct fsl_esdhc_priv *priv, struct mmc *mmc, uint clock) pr_warn("fsl_esdhc_imx: Internal clock never stabilised.\n"); #ifdef CONFIG_FSL_USDHC - esdhc_setbits32(&regs->vendorspec, VENDORSPEC_PEREN | VENDORSPEC_CKEN); + esdhc_setbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON); #else esdhc_setbits32(&regs->sysctl, SYSCTL_PEREN | SYSCTL_CKEN); #endif @@ -720,8 +723,14 @@ static void esdhc_set_strobe_dll(struct mmc *mmc) struct fsl_esdhc_priv *priv = dev_get_priv(mmc->dev); struct fsl_esdhc *regs = priv->esdhc_regs; u32 val; + u32 tmp; + int ret; if (priv->clock > ESDHC_STROBE_DLL_CLK_FREQ) { + esdhc_clrbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON); + ret = readx_poll_timeout(esdhc_read32, &regs->prsstat, tmp, tmp & PRSSTAT_SDOFF, 100); + if (ret) + pr_warn("fsl_esdhc_imx: Internal clock never gate off.\n"); esdhc_write32(&regs->strobe_dllctrl, ESDHC_STROBE_DLL_CTRL_RESET); /* @@ -739,6 +748,7 @@ static void esdhc_set_strobe_dll(struct mmc *mmc) pr_warn("HS400 strobe DLL status REF not lock!\n"); if (!(val & ESDHC_STROBE_DLL_STS_SLV_LOCK)) pr_warn("HS400 strobe DLL status SLV not lock!\n"); + esdhc_setbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON); } } @@ -962,14 +972,18 @@ static int esdhc_set_ios_common(struct fsl_esdhc_priv *priv, struct mmc *mmc) #ifdef MMC_SUPPORTS_TUNING if (mmc->clk_disable) { #ifdef CONFIG_FSL_USDHC - esdhc_clrbits32(&regs->vendorspec, VENDORSPEC_CKEN); + u32 tmp; + + esdhc_clrbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON); + ret = readx_poll_timeout(esdhc_read32, &regs->prsstat, tmp, tmp & PRSSTAT_SDOFF, 100); + if (ret) + pr_warn("fsl_esdhc_imx: Internal clock never gate off.\n"); #else esdhc_clrbits32(&regs->sysctl, SYSCTL_CKEN); #endif } else { #ifdef CONFIG_FSL_USDHC - esdhc_setbits32(&regs->vendorspec, VENDORSPEC_PEREN | - VENDORSPEC_CKEN); + esdhc_setbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON); #else esdhc_setbits32(&regs->sysctl, SYSCTL_PEREN | SYSCTL_CKEN); #endif @@ -1045,7 +1059,7 @@ static int esdhc_init_common(struct fsl_esdhc_priv *priv, struct mmc *mmc) #ifndef CONFIG_FSL_USDHC esdhc_setbits32(&regs->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN); #else - esdhc_setbits32(&regs->vendorspec, VENDORSPEC_HCKEN | VENDORSPEC_IPGEN); + esdhc_setbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON); #endif /* Set the initial clock speed */ @@ -1183,8 +1197,7 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv *priv, esdhc_write32(&regs->autoc12err, 0); esdhc_write32(&regs->clktunectrlstatus, 0); #else - esdhc_setbits32(&regs->vendorspec, VENDORSPEC_PEREN | - VENDORSPEC_HCKEN | VENDORSPEC_IPGEN | VENDORSPEC_CKEN); + esdhc_setbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON); #endif if (priv->vs18_enable) diff --git a/include/fsl_esdhc_imx.h b/include/fsl_esdhc_imx.h index 45ed635a77..b092034464 100644 --- a/include/fsl_esdhc_imx.h +++ b/include/fsl_esdhc_imx.h @@ -39,6 +39,7 @@ #define VENDORSPEC_HCKEN 0x00001000 #define VENDORSPEC_IPGEN 0x00000800 #define VENDORSPEC_INIT 0x20007809 +#define VENDORSPEC_FRC_SDCLK_ON 0x00000100 #define IRQSTAT 0x0002e030 #define IRQSTAT_DMAE (0x10000000) @@ -96,6 +97,7 @@ #define PRSSTAT_CINS (0x00010000) #define PRSSTAT_BREN (0x00000800) #define PRSSTAT_BWEN (0x00000400) +#define PRSSTAT_SDOFF (0x00000080) #define PRSSTAT_SDSTB (0X00000008) #define PRSSTAT_DLA (0x00000004) #define PRSSTAT_CICHB (0x00000002) -- 2.17.1

5 7

[PATCH v3 00/12] smbios: Enhancements for more flexibility
by Simon Glass 05 Feb '21

05 Feb '21

This series includes various patches to allow more flexibility as to where the data for SMBIOS tables comes from: - introduces some standard sysinfo options as a source, e.g. to read strapping pins to determine the board revision - allows the U-Boot version number to be included - allows the version number to be provided programmatically, e.g. to support the build system adding information after U-Boot is built Documentation is added for how to obtain version information. The code is also refactored a little to make it easier to maintain. Changes in v3: - Move to doc/ and .rst format - Add examples for converting epoch values - Use .rst file instead of README - Fix comment for smbios_add_prop() - Rename set_eos() to smbios_set_eos() - Add missing DECLARE_GLOBAL_DATA_PTR - Expand commit to explain why operations are required - Use SMBIOS_STR_MAX for the max sysinfo string length Changes in v2: - Add a comment about dropping the century - Zero the context's dev pointer if not used - Correct documentation format - Add new patch to fix sysinfo with CONFIG_IS_ENABLED() - Add new patch to fix crash on coral Simon Glass (12): README: Add doumentation for version information Makefile: Provide numeric versions smbios: Move smbios_write_type to the C file smbios: Use char consistently for the eos member smbios: Set BIOS release version smbios: Use a struct to keep track of context smbios: Drop the eos parameter smbios: Track the end of the string table smbios: Add more options for the BIOS version string sysinfo: Move #ifdef so that operations are always defined x86: coral: Add sysinfo ops smbios: Allow a few values to come from sysinfo Makefile | 4 + board/google/chromebook_coral/coral.c | 5 + doc/Makefile | 1 - doc/develop/index.rst | 1 + doc/develop/version.rst | 101 +++++++++++ include/asm-generic/global_data.h | 6 + include/smbios.h | 26 +-- include/sysinfo.h | 13 +- lib/smbios.c | 248 +++++++++++++++++++------- 9 files changed, 328 insertions(+), 77 deletions(-) create mode 100644 doc/develop/version.rst -- 2.30.0.280.ga3ce27912f-goog

2 18

[PATCH 0/4] Add Gateworks Venice board support
by Tim Harvey 05 Feb '21

05 Feb '21

The Gateworks Venice product family consists of several boards based on the i.MX 8M Mini SoC. A challenge I've had with this is that the board model information is stored in an I2C based EEPROM that must be read to know what PMIC is on the board in order to adjust certain power rails before DRAM init is called. I found this to be a challenge in the SPL as the SPL does not free memory thus the conceprt of calling dm_uninit() followed by dm_init_and_scan() to change dt's live in the SPL runs out of memory. Therefore I can't rely on DT/DM within the SPL for things that may differ board to board. Best Regards, Tim Frieder Schrempf (1): Respect that some compression algos can be enabled separately for SPL Tim Harvey (3): power: pmic: add driver for Monolithic Power mp5416 arm: dts: imx8mm: add Gateworks i.MX8 Mini Dev kits board: gateworks: imx8mm: Add Gateworks Venice board support arch/arm/dts/Makefile | 4 + arch/arm/dts/imx8mm-venice-gw700x-u-boot.dtsi | 105 + arch/arm/dts/imx8mm-venice-gw700x.dtsi | 495 +++++ arch/arm/dts/imx8mm-venice-gw71xx-0x-u-boot.dtsi | 5 + arch/arm/dts/imx8mm-venice-gw71xx-0x.dts | 19 + arch/arm/dts/imx8mm-venice-gw71xx.dtsi | 186 ++ arch/arm/dts/imx8mm-venice-gw72xx-0x-u-boot.dtsi | 5 + arch/arm/dts/imx8mm-venice-gw72xx-0x.dts | 20 + arch/arm/dts/imx8mm-venice-gw72xx.dtsi | 311 +++ arch/arm/dts/imx8mm-venice-gw73xx-0x-u-boot.dtsi | 5 + arch/arm/dts/imx8mm-venice-gw73xx-0x.dts | 19 + arch/arm/dts/imx8mm-venice-gw73xx.dtsi | 362 ++++ arch/arm/dts/imx8mm-venice-u-boot.dtsi | 103 + arch/arm/dts/imx8mm-venice.dts | 152 ++ arch/arm/mach-imx/imx8m/Kconfig | 7 + board/gateworks/venice/Kconfig | 13 + board/gateworks/venice/MAINTAINERS | 7 + board/gateworks/venice/Makefile | 12 + board/gateworks/venice/README | 34 + board/gateworks/venice/gsc.c | 687 ++++++ board/gateworks/venice/gsc.h | 54 + board/gateworks/venice/imx8mm_venice.c | 133 ++ board/gateworks/venice/lpddr4_timing.c | 2505 ++++++++++++++++++++++ board/gateworks/venice/lpddr4_timing.h | 12 + board/gateworks/venice/spl.c | 187 ++ common/image.c | 13 +- configs/imx8mm_venice_defconfig | 113 + drivers/power/pmic/Kconfig | 15 + drivers/power/pmic/Makefile | 1 + drivers/power/pmic/mp5416.c | 98 + include/configs/imx8mm_venice.h | 125 ++ include/power/mp5416.h | 41 + 32 files changed, 5842 insertions(+), 6 deletions(-) create mode 100644 arch/arm/dts/imx8mm-venice-gw700x-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-venice-gw700x.dtsi create mode 100644 arch/arm/dts/imx8mm-venice-gw71xx-0x-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-venice-gw71xx-0x.dts create mode 100644 arch/arm/dts/imx8mm-venice-gw71xx.dtsi create mode 100644 arch/arm/dts/imx8mm-venice-gw72xx-0x-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-venice-gw72xx-0x.dts create mode 100644 arch/arm/dts/imx8mm-venice-gw72xx.dtsi create mode 100644 arch/arm/dts/imx8mm-venice-gw73xx-0x-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-venice-gw73xx-0x.dts create mode 100644 arch/arm/dts/imx8mm-venice-gw73xx.dtsi create mode 100644 arch/arm/dts/imx8mm-venice-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-venice.dts create mode 100644 board/gateworks/venice/Kconfig create mode 100644 board/gateworks/venice/MAINTAINERS create mode 100644 board/gateworks/venice/Makefile create mode 100644 board/gateworks/venice/README create mode 100644 board/gateworks/venice/gsc.c create mode 100644 board/gateworks/venice/gsc.h create mode 100644 board/gateworks/venice/imx8mm_venice.c create mode 100644 board/gateworks/venice/lpddr4_timing.c create mode 100644 board/gateworks/venice/lpddr4_timing.h create mode 100644 board/gateworks/venice/spl.c create mode 100644 configs/imx8mm_venice_defconfig create mode 100644 drivers/power/pmic/mp5416.c create mode 100644 include/configs/imx8mm_venice.h create mode 100644 include/power/mp5416.h -- 2.7.4

4 14