June 2020 - U-Boot

[PATCH v8 1/2] mmc: ca_dw_mmc: Misc cleanup of driver
by Alex Nemirovsky 18 Jun '20

18 Jun '20

From: Arthur Li <arthur.li(a)cortina-access.com> - Rename DT compatible name - Remove uneccessary if-statement to support 8-bit buswidth - Remove redundant error msg - Use symbolic constants in switch statement Signed-off-by: Arthur Li <arthur.li(a)cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky(a)cortina-access.com> CC: Peng Fan <peng.fan(a)nxp.com> CC: Jaehoon Chung <jh80.chung(a)samsung.com> CC: Tom Rini <trini(a)konsulko.com> --- Changes in v8: - No code change - Split out individual driver from Cortina Package 2 patch series to help streamline acceptence into master Changes in v7: None Changes in v5: - Rebase code basis on v2020.04-rc5 which has already incorporated CAxxxx eMMC initial baseline Changes in v4: - Rename DT compatible name - Remove uneccessary if-statement to support 8-bit buswidth - Remove redundant error msg - Use symbolic constants in switch statement drivers/mmc/ca_dw_mmc.c | 34 ++++++++++++---------------------- 1 file changed, 12 insertions(+), 22 deletions(-) diff --git a/drivers/mmc/ca_dw_mmc.c b/drivers/mmc/ca_dw_mmc.c index acbc850..198c41f 100644 --- a/drivers/mmc/ca_dw_mmc.c +++ b/drivers/mmc/ca_dw_mmc.c @@ -19,6 +19,7 @@ #define SD_CLK_SEL_200MHZ (0x2) #define SD_CLK_SEL_100MHZ (0x1) +#define SD_CLK_SEL_50MHZ (0x0) #define IO_DRV_SD_DS_OFFSET (16) #define IO_DRV_SD_DS_MASK (0xff << IO_DRV_SD_DS_OFFSET) @@ -44,15 +45,11 @@ static void ca_dwmci_clksel(struct dwmci_host *host) struct ca_dwmmc_priv_data *priv = host->priv; u32 val = readl(priv->sd_dll_reg); - if (host->bus_hz >= 200000000) { - val &= ~SD_CLK_SEL_MASK; + val &= ~SD_CLK_SEL_MASK; + if (host->bus_hz >= 200000000) val |= SD_CLK_SEL_200MHZ; - } else if (host->bus_hz >= 100000000) { - val &= ~SD_CLK_SEL_MASK; + else if (host->bus_hz >= 100000000) val |= SD_CLK_SEL_100MHZ; - } else { - val &= ~SD_CLK_SEL_MASK; - } writel(val, priv->sd_dll_reg); } @@ -77,14 +74,14 @@ unsigned int ca_dwmci_get_mmc_clock(struct dwmci_host *host, uint freq) u8 clk_div; switch (sd_clk_sel) { - case 2: - clk_div = 1; + case SD_CLK_SEL_50MHZ: + clk_div = 4; break; - case 1: + case SD_CLK_SEL_100MHZ: clk_div = 2; break; default: - clk_div = 4; + clk_div = 1; } return SD_SCLK_MAX / clk_div / (host->div + 1); @@ -100,9 +97,6 @@ static int ca_dwmmc_ofdata_to_platdata(struct udevice *dev) host->dev_index = 0; host->buswidth = dev_read_u32_default(dev, "bus-width", 1); - if (host->buswidth != 1 && host->buswidth != 4) - return -EINVAL; - host->bus_hz = dev_read_u32_default(dev, "max-frequency", 50000000); priv->ds = dev_read_u32_default(dev, "io_ds", 0x33); host->fifo_mode = dev_read_bool(dev, "fifo-mode"); @@ -118,10 +112,8 @@ static int ca_dwmmc_ofdata_to_platdata(struct udevice *dev) return -EINVAL; host->ioaddr = dev_read_addr_ptr(dev); - if (host->ioaddr == (void *)FDT_ADDR_T_NONE) { - printf("DWMMC: base address is invalid\n"); + if (!host->ioaddr) return -EINVAL; - } host->priv = priv; @@ -140,10 +132,8 @@ static int ca_dwmmc_probe(struct udevice *dev) memcpy(&ca_dwmci_dm_ops, &dm_dwmci_ops, sizeof(struct dm_mmc_ops)); dwmci_setup_cfg(&plat->cfg, host, host->bus_hz, MIN_FREQ); - if (host->buswidth == 1) { - (&plat->cfg)->host_caps &= ~MMC_MODE_8BIT; - (&plat->cfg)->host_caps &= ~MMC_MODE_4BIT; - } + if (host->buswidth == 1) + (&plat->cfg)->host_caps &= ~(MMC_MODE_8BIT | MMC_MODE_4BIT); host->mmc = &plat->mmc; host->mmc->priv = &priv->host; @@ -164,7 +154,7 @@ static int ca_dwmmc_bind(struct udevice *dev) } static const struct udevice_id ca_dwmmc_ids[] = { - { .compatible = "snps,dw-cortina" }, + { .compatible = "cortina,ca-mmc" }, { } }; -- 2.7.4

3 4

[PATCH 1/4] phy: atheros: ar8035: Fix clock output calculation
by Fabio Estevam 18 Jun '20

18 Jun '20

The clock ouput frequency is calculated incorrectly for AR8035 due to wrong masking of priv->clk_25m_reg and priv->clk_25m_mask. This same issue has been already fixed in the kernel by: commit b1f4c209d84057b6d40b939b6e4404854271d797 Author: Oleksij Rempel <o.rempel(a)pengutronix.de> Date: Wed Apr 1 11:57:32 2020 +0200 net: phy: at803x: fix clock sink configuration on ATH8030 and ATH8035 The masks in priv->clk_25m_reg and priv->clk_25m_mask are one-bits-set for the values that comprise the fields, not zero-bits-set. This patch fixes the clock frequency configuration for ATH8030 and ATH8035 Atheros PHYs by removing the erroneous "~". To reproduce this bug, configure the PHY with the device tree binding "qca,clk-out-frequency" and remove the machine specific PHY fixups. Fixes: 2f664823a47021 ("net: phy: at803x: add device tree binding") Signed-off-by: Oleksij Rempel <o.rempel(a)pengutronix.de> Reported-by: Russell King <rmk+kernel(a)armlinux.org.uk> Reviewed-by: Russell King <rmk+kernel(a)armlinux.org.uk> Tested-by: Russell King <rmk+kernel(a)armlinux.org.uk> Signed-off-by: David S. Miller <davem(a)davemloft.net> Apply the same fix in the U-Boot driver. Tested on a i.MX6 Hummingboard. Signed-off-by: Fabio Estevam <festevam(a)gmail.com> Reviewed-by: Michael Walle <michael(a)walle.cc> --- drivers/net/phy/atheros.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c index 13f7275d17..f922fecd6b 100644 --- a/drivers/net/phy/atheros.c +++ b/drivers/net/phy/atheros.c @@ -275,11 +275,10 @@ static int ar803x_of_init(struct phy_device *phydev) * Fixup for the AR8035 which only has two bits. The two * remaining bits map to the same frequencies. */ - if (phydev->drv->uid == AR8035_PHY_ID) { - u16 clear = AR803x_CLK_25M_MASK & AR8035_CLK_25M_MASK; - priv->clk_25m_mask &= ~clear; - priv->clk_25m_reg &= ~clear; + if (phydev->drv->uid == AR8035_PHY_ID) { + priv->clk_25m_reg &= AR8035_CLK_25M_MASK; + priv->clk_25m_mask &= AR8035_CLK_25M_MASK; } } -- 2.17.1

4 9

[PATCH 1/2] riscv: Use correct version of fdtdec_get_addr_size
by Atish Patra 18 Jun '20

18 Jun '20

fdtdec_get_addr_size uses a fixed value for address_cells & size_cells which may not work correctly always. fdtdec_get_addr_size_no_parent will automatically calculate the cell sizes from parent but not optimized especially when parent node is already available with the caller. Use fdtdec_get_addr_size_auto_parent that automatically calculate the cell sizes and optimized for the given usecase. Signed-off-by: Atish Patra <atish.patra(a)wdc.com> --- arch/riscv/lib/fdt_fixup.c | 2 +- lib/fdtdec.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/riscv/lib/fdt_fixup.c b/arch/riscv/lib/fdt_fixup.c index 6db48ad04a56..f2ec37b57b15 100644 --- a/arch/riscv/lib/fdt_fixup.c +++ b/arch/riscv/lib/fdt_fixup.c @@ -44,7 +44,7 @@ int riscv_fdt_copy_resv_mem_node(const void *src, void *dst) fdt_for_each_subnode(node, src, offset) { name = fdt_get_name(src, node, NULL); - addr = fdtdec_get_addr_size_auto_noparent(src, node, + addr = fdtdec_get_addr_size_auto_parent(src, offset, node, "reg", 0, &size, false); if (addr == FDT_ADDR_T_NONE) { diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 1f2b763acc31..b62eb142ccc3 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -1296,7 +1296,8 @@ int fdtdec_add_reserved_memory(void *blob, const char *basename, const char *name = fdt_get_name(blob, node, NULL); phys_addr_t addr, size; - addr = fdtdec_get_addr_size(blob, node, "reg", &size); + addr = fdtdec_get_addr_size_auto_parent(blob, parent, node, + "reg", 0, &size, false); if (addr == FDT_ADDR_T_NONE) { debug("failed to read address/size for %s\n", name); continue; -- 2.24.0

3 5

[GIT PULL] TI changes for v2020.10 next
by Lokesh Vutla 18 Jun '20

18 Jun '20

Hi Tom, Please find the pull request for v2020.10 next containing TI specific changes. Travis-CI build: https://travis-ci.org/github/lokeshvutla/u-boot/builds/698883325 The following changes since commit be79009f3b9bbdbce283e67a865121e576d790ea: Merge tag 'u-boot-imx-20200609' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx (2020-06-09 09:17:24 -0400) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-ti.git tags/ti-v2020.10-next for you to fetch changes up to c0a8d6e1e67cc7feee5c9e6c7e8c13bb953734f1: ARM: da850-evm: Remove SPI from SPL when booting from NAND (2020-06-16 17:00:50 +0530) ---------------------------------------------------------------- Below are the major changes in this PR: - DM conversion for OMAP4, OMAP5 platforms. - Other minor fixes for Nokia RX51, am33, am57, am654. ---------------------------------------------------------------- Adam Ford (1): ARM: da850-evm: Remove SPI from SPL when booting from NAND Andrew F. Davis (3): tools: k3_gen_x509_cert: Allow selecting early JTAG debug value tools: k3_gen_x509_cert: Set default early HS JTAG access to disabled board: ti: am654: Disable SA2UL node for HS devices Bin Liu (1): phy: omap-usb2-phy: disable phy charger detect Faiz Abbas (1): mmc: davinci_mmc: Cleanup to use dt in U-boot and static platdata in SPL Luca Ceresoli (2): board: ti: am57xx: use GPIO_TO_PIN() to define GPIO number board: ti: use positive logic to detect idk boards Pali Rohár (2): Nokia RX-51: Add link for u-boot-gen-combined script to README file Nokia RX-51: Fix checking if serial console was enabled Peter Ujfalusi (2): omap4: Copy device tree from Linux 5.7.y for SDP4430 omap4: sdp: convert to device model Tero Kristo (4): omap4: Copy device tree from Linux 5.7.y omap4: panda: convert to device model omap5: Copy device tree from linux 5.7.y omap5: uevm: convert to device model Tom Rini (5): board: ti: common: Fix pointer-bool-conversion warnings board: ti: am335x_evm: Remove duplicate setting of bd_ram_ofs member gpio: omap_gpio: Fix unused function warning in non-DM case mmc: omap_hsmmc: Add guards around omap_hsmmc_get_cfg() net: cpsw: Add __maybe_unused to generated inlines arch/arm/dts/Makefile | 11 + arch/arm/dts/elpida_ecb240abacn.dtsi | 68 + arch/arm/dts/omap4-l4-abe.dtsi | 488 +++++ arch/arm/dts/omap4-l4.dtsi | 2473 +++++++++++++++++++++++ arch/arm/dts/omap4-mcpdm.dtsi | 44 + arch/arm/dts/omap4-panda-common.dtsi | 573 ++++++ arch/arm/dts/omap4-panda-es.dts | 82 + arch/arm/dts/omap4-panda.dts | 13 + arch/arm/dts/omap4-sdp-es23plus.dts | 14 + arch/arm/dts/omap4-sdp.dts | 713 +++++++ arch/arm/dts/omap4-u-boot.dtsi | 39 + arch/arm/dts/omap4.dtsi | 657 ++++++ arch/arm/dts/omap443x-clocks.dtsi | 15 + arch/arm/dts/omap443x.dtsi | 76 + arch/arm/dts/omap4460.dtsi | 131 ++ arch/arm/dts/omap446x-clocks.dtsi | 24 + arch/arm/dts/omap44xx-clocks.dtsi | 1324 ++++++++++++ arch/arm/dts/omap5-board-common.dtsi | 762 +++++++ arch/arm/dts/omap5-l4-abe.dtsi | 449 ++++ arch/arm/dts/omap5-l4.dtsi | 2437 ++++++++++++++++++++++ arch/arm/dts/omap5-u-boot.dtsi | 42 + arch/arm/dts/omap5-uevm.dts | 200 ++ arch/arm/dts/omap5.dtsi | 583 ++++++ arch/arm/dts/omap54xx-clocks.dtsi | 1208 +++++++++++ arch/arm/dts/twl6030.dtsi | 105 + arch/arm/dts/twl6030_omap4.dtsi | 35 + arch/arm/mach-davinci/include/mach/sdmmc_defs.h | 7 + board/davinci/da8xxevm/omapl138_lcdk.c | 12 + board/nokia/rx51/rx51.c | 2 +- board/ti/am335x/board.c | 1 - board/ti/am57xx/board.c | 9 +- board/ti/am65x/evm.c | 6 +- board/ti/common/board_detect.c | 14 +- board/ti/omap5_uevm/evm.c | 78 +- board/ti/panda/panda.c | 50 +- board/ti/sdp4430/sdp.c | 12 + configs/da850evm_nand_defconfig | 4 - configs/omap4_panda_defconfig | 12 +- configs/omap4_sdp4430_defconfig | 12 +- configs/omap5_uevm_defconfig | 13 +- configs/omapl138_lcdk_defconfig | 4 - doc/README.nokia_rx51 | 5 + drivers/gpio/omap_gpio.c | 9 +- drivers/mmc/davinci_mmc.c | 63 +- drivers/mmc/omap_hsmmc.c | 3 + drivers/net/ti/cpsw.c | 5 +- drivers/phy/omap-usb2-phy.c | 33 +- include/dt-bindings/clock/omap4.h | 149 ++ include/dt-bindings/clock/omap5.h | 129 ++ tools/k3_gen_x509_cert.sh | 14 +- 50 files changed, 13022 insertions(+), 190 deletions(-) create mode 100644 arch/arm/dts/elpida_ecb240abacn.dtsi create mode 100644 arch/arm/dts/omap4-l4-abe.dtsi create mode 100644 arch/arm/dts/omap4-l4.dtsi create mode 100644 arch/arm/dts/omap4-mcpdm.dtsi create mode 100644 arch/arm/dts/omap4-panda-common.dtsi create mode 100644 arch/arm/dts/omap4-panda-es.dts create mode 100644 arch/arm/dts/omap4-panda.dts create mode 100644 arch/arm/dts/omap4-sdp-es23plus.dts create mode 100644 arch/arm/dts/omap4-sdp.dts create mode 100644 arch/arm/dts/omap4-u-boot.dtsi create mode 100644 arch/arm/dts/omap4.dtsi create mode 100644 arch/arm/dts/omap443x-clocks.dtsi create mode 100644 arch/arm/dts/omap443x.dtsi create mode 100644 arch/arm/dts/omap4460.dtsi create mode 100644 arch/arm/dts/omap446x-clocks.dtsi create mode 100644 arch/arm/dts/omap44xx-clocks.dtsi create mode 100644 arch/arm/dts/omap5-board-common.dtsi create mode 100644 arch/arm/dts/omap5-l4-abe.dtsi create mode 100644 arch/arm/dts/omap5-l4.dtsi create mode 100644 arch/arm/dts/omap5-uevm.dts create mode 100644 arch/arm/dts/omap5.dtsi create mode 100644 arch/arm/dts/omap54xx-clocks.dtsi create mode 100644 arch/arm/dts/twl6030.dtsi create mode 100644 arch/arm/dts/twl6030_omap4.dtsi create mode 100644 include/dt-bindings/clock/omap4.h create mode 100644 include/dt-bindings/clock/omap5.h -- 2.23.0

2 4

[PULL u-boot] Please pull u-boot-amlogic-20200618
by Neil Armstrong 18 Jun '20

18 Jun '20

Hi Tom, This PR moves the amlogic boards documentation in doc/board/amlogic in RsT format. The CI job is at https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic/pipelines/3707 Thanks, Neil The following changes since commit 9cb895203a46654f7ee6dd95be5c8ab05e4dfbd3: Merge tag 'u-boot-stm32-20200616' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm (2020-06-16 09:18:56 -0400) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic.git tags/u-boot-amlogic-20200618 for you to fetch changes up to 9c55f5d11260c5aa0f91d8cb32aa0ad00910659d: board: amlogic: add board doc files to MAINTAINERS (2020-06-18 10:24:13 +0200) ---------------------------------------------------------------- - move amlogic board documentation into doc/board in RsT format ---------------------------------------------------------------- Neil Armstrong (2): board: amlogic: move boards doc into doc/board/amlogic board: amlogic: add board doc files to MAINTAINERS MAINTAINERS | 1 + board/amlogic/p200/MAINTAINERS | 3 + board/amlogic/p200/README.nanopi-k2 | 98 --------------- board/amlogic/p200/README.p200 | 102 --------------- board/amlogic/p201/MAINTAINERS | 1 + board/amlogic/p201/README.p201 | 102 --------------- board/amlogic/p212/MAINTAINERS | 4 + board/amlogic/p212/README.khadas-vim | 101 --------------- board/amlogic/p212/README.libretech-ac | 102 --------------- board/amlogic/p212/README.libretech-cc | 134 -------------------- board/amlogic/p212/README.p212 | 102 --------------- board/amlogic/q200/MAINTAINERS | 1 + board/amlogic/q200/README.khadas-vim2 | 102 --------------- board/amlogic/q200/README.q200 | 101 --------------- board/amlogic/s400/MAINTAINERS | 1 + board/amlogic/s400/README | 109 ---------------- board/amlogic/sei510/MAINTAINERS | 1 + board/amlogic/sei510/README | 122 ------------------ board/amlogic/sei610/MAINTAINERS | 1 + board/amlogic/sei610/README | 118 ------------------ board/amlogic/u200/MAINTAINERS | 1 + board/amlogic/u200/README | 127 ------------------- board/amlogic/w400/MAINTAINERS | 4 + board/amlogic/w400/README.khadas-vim3 | 131 -------------------- board/amlogic/w400/README.khadas-vim3l | 131 -------------------- board/amlogic/w400/README.odroid-n2 | 129 ------------------- board/amlogic/w400/README.w400 | 129 ------------------- doc/board/amlogic/index.rst | 95 ++++++++++++++ doc/board/amlogic/khadas-vim.rst | 101 +++++++++++++++ doc/board/amlogic/khadas-vim2.rst | 102 +++++++++++++++ doc/board/amlogic/khadas-vim3.rst | 132 ++++++++++++++++++++ doc/board/amlogic/khadas-vim3l.rst | 130 +++++++++++++++++++ doc/board/amlogic/libretech-ac.rst | 110 +++++++++++++++++ doc/board/amlogic/libretech-cc.rst | 135 ++++++++++++++++++++ doc/board/amlogic/nanopi-k2.rst | 104 ++++++++++++++++ .../board/amlogic/odroid-c2.rst | 52 ++++---- doc/board/amlogic/odroid-n2.rst | 130 +++++++++++++++++++ doc/board/amlogic/p200.rst | 102 +++++++++++++++ doc/board/amlogic/p201.rst | 102 +++++++++++++++ doc/board/amlogic/p212.rst | 102 +++++++++++++++ doc/board/amlogic/q200.rst | 101 +++++++++++++++ doc/board/amlogic/s400.rst | 109 ++++++++++++++++ doc/board/amlogic/sei510.rst | 130 +++++++++++++++++++ doc/board/amlogic/sei610.rst | 133 ++++++++++++++++++++ doc/board/amlogic/u200.rst | 135 ++++++++++++++++++++ doc/board/amlogic/w400.rst | 137 +++++++++++++++++++++ doc/board/index.rst | 1 + 47 files changed, 2134 insertions(+), 1967 deletions(-) delete mode 100644 board/amlogic/p200/README.nanopi-k2 delete mode 100644 board/amlogic/p200/README.p200 delete mode 100644 board/amlogic/p201/README.p201 delete mode 100644 board/amlogic/p212/README.khadas-vim delete mode 100644 board/amlogic/p212/README.libretech-ac delete mode 100644 board/amlogic/p212/README.libretech-cc delete mode 100644 board/amlogic/p212/README.p212 delete mode 100644 board/amlogic/q200/README.khadas-vim2 delete mode 100644 board/amlogic/q200/README.q200 delete mode 100644 board/amlogic/s400/README delete mode 100644 board/amlogic/sei510/README delete mode 100644 board/amlogic/sei610/README delete mode 100644 board/amlogic/u200/README delete mode 100644 board/amlogic/w400/README.khadas-vim3 delete mode 100644 board/amlogic/w400/README.khadas-vim3l delete mode 100644 board/amlogic/w400/README.odroid-n2 delete mode 100644 board/amlogic/w400/README.w400 create mode 100644 doc/board/amlogic/index.rst create mode 100644 doc/board/amlogic/khadas-vim.rst create mode 100644 doc/board/amlogic/khadas-vim2.rst create mode 100644 doc/board/amlogic/khadas-vim3.rst create mode 100644 doc/board/amlogic/khadas-vim3l.rst create mode 100644 doc/board/amlogic/libretech-ac.rst create mode 100644 doc/board/amlogic/libretech-cc.rst create mode 100644 doc/board/amlogic/nanopi-k2.rst rename board/amlogic/p200/README.odroid-c2 => doc/board/amlogic/odroid-c2.rst (56%) create mode 100644 doc/board/amlogic/odroid-n2.rst create mode 100644 doc/board/amlogic/p200.rst create mode 100644 doc/board/amlogic/p201.rst create mode 100644 doc/board/amlogic/p212.rst create mode 100644 doc/board/amlogic/q200.rst create mode 100644 doc/board/amlogic/s400.rst create mode 100644 doc/board/amlogic/sei510.rst create mode 100644 doc/board/amlogic/sei610.rst create mode 100644 doc/board/amlogic/u200.rst create mode 100644 doc/board/amlogic/w400.rst

2 1

[PATCH v2 00/10] spi: dm-conversion (part2)
by Jagan Teki 18 Jun '20

18 Jun '20

This is rebased v2 for previous version spi dm-conversion series[1] on fsl_espi boards. All these patches dropped the boards which are not converted spi dm and also the maintainer is accepted to remove the same. Rest of the patches in this series are trying to switch spi dm. Changes for v2: - rebase on master - updated commit message - collect Priyanka r-b tag [1] https://patchwork.ozlabs.org/project/uboot/cover/20200527164655.177741-1-ja… Any inputs? Jagan. Jagan Teki (10): powerpc: Remove configs/B4420QDS_NAND_defconfig board powerpc: Remove configs/BSC9131RDB_NAND_SYSCLK100_defconfig board powerpc: Remove configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig board powerpc: Remove configs/C29XPCIE_NAND_defconfig board powerpc: Remove configs/MPC8536DS_36BIT_defconfig board powerpc: Remove P1022DS_36BIT_NAND_defconfig board powerpc: Remove T1024QDS_DDR4_SECURE_BOOT_defconfig board powerpc: Remove T1040QDS_DDR4_defconfig board powerpc: Remove T4160QDS_NAND_defconfig board powerpc: Remove TWR-P1025_defconfig board arch/powerpc/cpu/mpc85xx/Kconfig | 108 -- board/freescale/b4860qds/Kconfig | 14 - board/freescale/b4860qds/MAINTAINERS | 17 - board/freescale/b4860qds/Makefile | 16 - board/freescale/b4860qds/b4860qds.c | 1276 ----------------- board/freescale/b4860qds/b4860qds.h | 12 - .../b4860qds/b4860qds_crossbar_con.h | 72 - board/freescale/b4860qds/b4860qds_qixis.h | 28 - board/freescale/b4860qds/b4_pbi.cfg | 30 - board/freescale/b4860qds/b4_rcw.cfg | 7 - board/freescale/b4860qds/ddr.c | 267 ---- board/freescale/b4860qds/eth_b4860qds.c | 454 ------ board/freescale/b4860qds/law.c | 28 - board/freescale/b4860qds/pci.c | 23 - board/freescale/b4860qds/spl.c | 119 -- board/freescale/b4860qds/tlb.c | 154 -- board/freescale/bsc9131rdb/Kconfig | 12 - board/freescale/bsc9131rdb/MAINTAINERS | 9 - board/freescale/bsc9131rdb/Makefile | 21 - board/freescale/bsc9131rdb/README | 151 -- board/freescale/bsc9131rdb/bsc9131rdb.c | 82 -- board/freescale/bsc9131rdb/ddr.c | 170 --- board/freescale/bsc9131rdb/law.c | 18 - board/freescale/bsc9131rdb/spl_minimal.c | 105 -- board/freescale/bsc9131rdb/tlb.c | 61 - board/freescale/bsc9132qds/Kconfig | 14 - board/freescale/bsc9132qds/MAINTAINERS | 25 - board/freescale/bsc9132qds/Makefile | 21 - board/freescale/bsc9132qds/README | 150 -- board/freescale/bsc9132qds/bsc9132qds.c | 432 ------ board/freescale/bsc9132qds/ddr.c | 191 --- board/freescale/bsc9132qds/law.c | 28 - board/freescale/bsc9132qds/spl_minimal.c | 117 -- board/freescale/bsc9132qds/tlb.c | 91 -- board/freescale/c29xpcie/Kconfig | 14 - board/freescale/c29xpcie/MAINTAINERS | 10 - board/freescale/c29xpcie/Makefile | 25 - board/freescale/c29xpcie/README | 99 -- board/freescale/c29xpcie/c29xpcie.c | 159 -- board/freescale/c29xpcie/cpld.c | 133 -- board/freescale/c29xpcie/cpld.h | 39 - board/freescale/c29xpcie/ddr.c | 106 -- board/freescale/c29xpcie/law.c | 18 - board/freescale/c29xpcie/spl.c | 81 -- board/freescale/c29xpcie/spl_minimal.c | 63 - board/freescale/c29xpcie/tlb.c | 84 -- board/freescale/mpc8536ds/Kconfig | 12 - board/freescale/mpc8536ds/MAINTAINERS | 9 - board/freescale/mpc8536ds/Makefile | 10 - board/freescale/mpc8536ds/README | 127 -- board/freescale/mpc8536ds/ddr.c | 59 - board/freescale/mpc8536ds/law.c | 19 - board/freescale/mpc8536ds/mpc8536ds.c | 293 ---- board/freescale/mpc8536ds/tlb.c | 70 - board/freescale/p1022ds/Kconfig | 12 - board/freescale/p1022ds/MAINTAINERS | 13 - board/freescale/p1022ds/Makefile | 25 - board/freescale/p1022ds/README | 23 - board/freescale/p1022ds/ddr.c | 106 -- board/freescale/p1022ds/diu.c | 478 ------ board/freescale/p1022ds/law.c | 18 - board/freescale/p1022ds/p1022ds.c | 364 ----- board/freescale/p1022ds/spl.c | 131 -- board/freescale/p1022ds/spl_minimal.c | 71 - board/freescale/p1022ds/tlb.c | 101 -- board/freescale/p1_twr/Kconfig | 12 - board/freescale/p1_twr/MAINTAINERS | 6 - board/freescale/p1_twr/Makefile | 9 - board/freescale/p1_twr/ddr.c | 69 - board/freescale/p1_twr/law.c | 15 - board/freescale/p1_twr/p1_twr.c | 292 ---- board/freescale/p1_twr/tlb.c | 75 - board/freescale/t102xqds/Kconfig | 14 - board/freescale/t102xqds/MAINTAINERS | 12 - board/freescale/t102xqds/Makefile | 15 - board/freescale/t102xqds/README | 328 ----- board/freescale/t102xqds/ddr.c | 195 --- board/freescale/t102xqds/eth_t102xqds.c | 445 ------ board/freescale/t102xqds/law.c | 31 - board/freescale/t102xqds/pci.c | 23 - board/freescale/t102xqds/spl.c | 156 -- board/freescale/t102xqds/t1024_nand_rcw.cfg | 10 - board/freescale/t102xqds/t1024_pbi.cfg | 26 - board/freescale/t102xqds/t1024_sd_rcw.cfg | 10 - board/freescale/t102xqds/t1024_spi_rcw.cfg | 10 - board/freescale/t102xqds/t102xqds.c | 499 ------- board/freescale/t102xqds/t102xqds.h | 14 - board/freescale/t102xqds/t102xqds_qixis.h | 63 - board/freescale/t102xqds/tlb.c | 116 -- board/freescale/t1040qds/Kconfig | 14 - board/freescale/t1040qds/MAINTAINERS | 12 - board/freescale/t1040qds/Makefile | 11 - board/freescale/t1040qds/README | 169 --- board/freescale/t1040qds/ddr.c | 142 -- board/freescale/t1040qds/ddr.h | 52 - board/freescale/t1040qds/diu.c | 98 -- board/freescale/t1040qds/eth.c | 592 -------- board/freescale/t1040qds/law.c | 31 - board/freescale/t1040qds/pci.c | 23 - board/freescale/t1040qds/t1040_pbi.cfg | 27 - board/freescale/t1040qds/t1040_rcw.cfg | 7 - board/freescale/t1040qds/t1040qds.c | 307 ---- board/freescale/t1040qds/t1040qds.h | 14 - board/freescale/t1040qds/t1040qds_qixis.h | 51 - board/freescale/t1040qds/tlb.c | 107 -- board/freescale/t4qds/Kconfig | 14 - board/freescale/t4qds/MAINTAINERS | 18 - board/freescale/t4qds/Makefile | 15 - board/freescale/t4qds/README | 194 --- board/freescale/t4qds/ddr.c | 134 -- board/freescale/t4qds/ddr.h | 81 -- board/freescale/t4qds/eth.c | 869 ----------- board/freescale/t4qds/law.c | 33 - board/freescale/t4qds/pci.c | 23 - board/freescale/t4qds/spl.c | 145 -- board/freescale/t4qds/t4240emu.c | 85 -- board/freescale/t4qds/t4240qds.c | 929 ------------ board/freescale/t4qds/t4240qds_qixis.h | 42 - board/freescale/t4qds/t4_nand_rcw.cfg | 7 - board/freescale/t4qds/t4_pbi.cfg | 21 - board/freescale/t4qds/t4_sd_rcw.cfg | 7 - board/freescale/t4qds/t4qds.h | 12 - board/freescale/t4qds/tlb.c | 146 -- configs/B4420QDS_NAND_defconfig | 69 - configs/B4420QDS_SPIFLASH_defconfig | 55 - configs/B4420QDS_defconfig | 53 - configs/B4860QDS_NAND_defconfig | 69 - configs/B4860QDS_SECURE_BOOT_defconfig | 56 - configs/B4860QDS_SPIFLASH_defconfig | 55 - configs/B4860QDS_SRIO_PCIE_BOOT_defconfig | 49 - configs/B4860QDS_defconfig | 53 - configs/BSC9131RDB_NAND_SYSCLK100_defconfig | 64 - configs/BSC9131RDB_NAND_defconfig | 63 - .../BSC9131RDB_SPIFLASH_SYSCLK100_defconfig | 56 - configs/BSC9131RDB_SPIFLASH_defconfig | 56 - ...BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig | 66 - configs/BSC9132QDS_NAND_DDRCLK100_defconfig | 72 - ...BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig | 66 - configs/BSC9132QDS_NAND_DDRCLK133_defconfig | 72 - .../BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig | 65 - configs/BSC9132QDS_NOR_DDRCLK100_defconfig | 63 - .../BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig | 65 - configs/BSC9132QDS_NOR_DDRCLK133_defconfig | 63 - ...C9132QDS_SDCARD_DDRCLK100_SECURE_defconfig | 66 - configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig | 63 - ...C9132QDS_SDCARD_DDRCLK133_SECURE_defconfig | 66 - configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig | 63 - ...132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig | 66 - .../BSC9132QDS_SPIFLASH_DDRCLK100_defconfig | 64 - ...132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig | 66 - .../BSC9132QDS_SPIFLASH_DDRCLK133_defconfig | 64 - configs/C29XPCIE_NAND_defconfig | 70 - configs/C29XPCIE_NOR_SECBOOT_defconfig | 55 - configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig | 57 - configs/C29XPCIE_SPIFLASH_defconfig | 55 - configs/C29XPCIE_defconfig | 53 - configs/MPC8536DS_36BIT_defconfig | 61 - configs/MPC8536DS_SDCARD_defconfig | 60 - configs/MPC8536DS_SPIFLASH_defconfig | 61 - configs/MPC8536DS_defconfig | 60 - configs/P1022DS_36BIT_NAND_defconfig | 80 -- configs/P1022DS_36BIT_SDCARD_defconfig | 74 - configs/P1022DS_36BIT_SPIFLASH_defconfig | 76 - configs/P1022DS_36BIT_defconfig | 62 - configs/P1022DS_NAND_defconfig | 79 - configs/P1022DS_SDCARD_defconfig | 73 - configs/P1022DS_SPIFLASH_defconfig | 75 - configs/P1022DS_defconfig | 61 - configs/T1024QDS_DDR4_SECURE_BOOT_defconfig | 69 - configs/T1024QDS_DDR4_defconfig | 64 - configs/T1024QDS_NAND_defconfig | 83 -- configs/T1024QDS_SDCARD_defconfig | 80 -- configs/T1024QDS_SECURE_BOOT_defconfig | 70 - configs/T1024QDS_SPIFLASH_defconfig | 83 -- configs/T1024QDS_defconfig | 67 - configs/T1040QDS_DDR4_defconfig | 67 - configs/T1040QDS_SECURE_BOOT_defconfig | 70 - configs/T1040QDS_defconfig | 68 - configs/T4160QDS_NAND_defconfig | 69 - configs/T4160QDS_SDCARD_defconfig | 66 - configs/T4160QDS_SECURE_BOOT_defconfig | 56 - configs/T4160QDS_defconfig | 53 - configs/T4240QDS_NAND_defconfig | 69 - configs/T4240QDS_SDCARD_defconfig | 66 - configs/T4240QDS_SECURE_BOOT_defconfig | 56 - configs/T4240QDS_SRIO_PCIE_BOOT_defconfig | 49 - configs/T4240QDS_defconfig | 53 - configs/TWR-P1025_defconfig | 64 - include/configs/B4860QDS.h | 759 ---------- include/configs/BSC9131RDB.h | 337 ----- include/configs/BSC9132QDS.h | 548 ------- include/configs/C29XPCIE.h | 443 ------ include/configs/MPC8536DS.h | 642 --------- include/configs/P1022DS.h | 593 -------- include/configs/T102xQDS.h | 756 ---------- include/configs/T1040QDS.h | 667 --------- include/configs/T4240QDS.h | 555 ------- include/configs/p1_twr.h | 480 ------- 198 files changed, 23934 deletions(-) delete mode 100644 board/freescale/b4860qds/Kconfig delete mode 100644 board/freescale/b4860qds/MAINTAINERS delete mode 100644 board/freescale/b4860qds/Makefile delete mode 100644 board/freescale/b4860qds/b4860qds.c delete mode 100644 board/freescale/b4860qds/b4860qds.h delete mode 100644 board/freescale/b4860qds/b4860qds_crossbar_con.h delete mode 100644 board/freescale/b4860qds/b4860qds_qixis.h delete mode 100644 board/freescale/b4860qds/b4_pbi.cfg delete mode 100644 board/freescale/b4860qds/b4_rcw.cfg delete mode 100644 board/freescale/b4860qds/ddr.c delete mode 100644 board/freescale/b4860qds/eth_b4860qds.c delete mode 100644 board/freescale/b4860qds/law.c delete mode 100644 board/freescale/b4860qds/pci.c delete mode 100644 board/freescale/b4860qds/spl.c delete mode 100644 board/freescale/b4860qds/tlb.c delete mode 100644 board/freescale/bsc9131rdb/Kconfig delete mode 100644 board/freescale/bsc9131rdb/MAINTAINERS delete mode 100644 board/freescale/bsc9131rdb/Makefile delete mode 100644 board/freescale/bsc9131rdb/README delete mode 100644 board/freescale/bsc9131rdb/bsc9131rdb.c delete mode 100644 board/freescale/bsc9131rdb/ddr.c delete mode 100644 board/freescale/bsc9131rdb/law.c delete mode 100644 board/freescale/bsc9131rdb/spl_minimal.c delete mode 100644 board/freescale/bsc9131rdb/tlb.c delete mode 100644 board/freescale/bsc9132qds/Kconfig delete mode 100644 board/freescale/bsc9132qds/MAINTAINERS delete mode 100644 board/freescale/bsc9132qds/Makefile delete mode 100644 board/freescale/bsc9132qds/README delete mode 100644 board/freescale/bsc9132qds/bsc9132qds.c delete mode 100644 board/freescale/bsc9132qds/ddr.c delete mode 100644 board/freescale/bsc9132qds/law.c delete mode 100644 board/freescale/bsc9132qds/spl_minimal.c delete mode 100644 board/freescale/bsc9132qds/tlb.c delete mode 100644 board/freescale/c29xpcie/Kconfig delete mode 100644 board/freescale/c29xpcie/MAINTAINERS delete mode 100644 board/freescale/c29xpcie/Makefile delete mode 100644 board/freescale/c29xpcie/README delete mode 100644 board/freescale/c29xpcie/c29xpcie.c delete mode 100644 board/freescale/c29xpcie/cpld.c delete mode 100644 board/freescale/c29xpcie/cpld.h delete mode 100644 board/freescale/c29xpcie/ddr.c delete mode 100644 board/freescale/c29xpcie/law.c delete mode 100644 board/freescale/c29xpcie/spl.c delete mode 100644 board/freescale/c29xpcie/spl_minimal.c delete mode 100644 board/freescale/c29xpcie/tlb.c delete mode 100644 board/freescale/mpc8536ds/Kconfig delete mode 100644 board/freescale/mpc8536ds/MAINTAINERS delete mode 100644 board/freescale/mpc8536ds/Makefile delete mode 100644 board/freescale/mpc8536ds/README delete mode 100644 board/freescale/mpc8536ds/ddr.c delete mode 100644 board/freescale/mpc8536ds/law.c delete mode 100644 board/freescale/mpc8536ds/mpc8536ds.c delete mode 100644 board/freescale/mpc8536ds/tlb.c delete mode 100644 board/freescale/p1022ds/Kconfig delete mode 100644 board/freescale/p1022ds/MAINTAINERS delete mode 100644 board/freescale/p1022ds/Makefile delete mode 100644 board/freescale/p1022ds/README delete mode 100644 board/freescale/p1022ds/ddr.c delete mode 100644 board/freescale/p1022ds/diu.c delete mode 100644 board/freescale/p1022ds/law.c delete mode 100644 board/freescale/p1022ds/p1022ds.c delete mode 100644 board/freescale/p1022ds/spl.c delete mode 100644 board/freescale/p1022ds/spl_minimal.c delete mode 100644 board/freescale/p1022ds/tlb.c delete mode 100644 board/freescale/p1_twr/Kconfig delete mode 100644 board/freescale/p1_twr/MAINTAINERS delete mode 100644 board/freescale/p1_twr/Makefile delete mode 100644 board/freescale/p1_twr/ddr.c delete mode 100644 board/freescale/p1_twr/law.c delete mode 100644 board/freescale/p1_twr/p1_twr.c delete mode 100644 board/freescale/p1_twr/tlb.c delete mode 100644 board/freescale/t102xqds/Kconfig delete mode 100644 board/freescale/t102xqds/MAINTAINERS delete mode 100644 board/freescale/t102xqds/Makefile delete mode 100644 board/freescale/t102xqds/README delete mode 100644 board/freescale/t102xqds/ddr.c delete mode 100644 board/freescale/t102xqds/eth_t102xqds.c delete mode 100644 board/freescale/t102xqds/law.c delete mode 100644 board/freescale/t102xqds/pci.c delete mode 100644 board/freescale/t102xqds/spl.c delete mode 100644 board/freescale/t102xqds/t1024_nand_rcw.cfg delete mode 100644 board/freescale/t102xqds/t1024_pbi.cfg delete mode 100644 board/freescale/t102xqds/t1024_sd_rcw.cfg delete mode 100644 board/freescale/t102xqds/t1024_spi_rcw.cfg delete mode 100644 board/freescale/t102xqds/t102xqds.c delete mode 100644 board/freescale/t102xqds/t102xqds.h delete mode 100644 board/freescale/t102xqds/t102xqds_qixis.h delete mode 100644 board/freescale/t102xqds/tlb.c delete mode 100644 board/freescale/t1040qds/Kconfig delete mode 100644 board/freescale/t1040qds/MAINTAINERS delete mode 100644 board/freescale/t1040qds/Makefile delete mode 100644 board/freescale/t1040qds/README delete mode 100644 board/freescale/t1040qds/ddr.c delete mode 100644 board/freescale/t1040qds/ddr.h delete mode 100644 board/freescale/t1040qds/diu.c delete mode 100644 board/freescale/t1040qds/eth.c delete mode 100644 board/freescale/t1040qds/law.c delete mode 100644 board/freescale/t1040qds/pci.c delete mode 100644 board/freescale/t1040qds/t1040_pbi.cfg delete mode 100644 board/freescale/t1040qds/t1040_rcw.cfg delete mode 100644 board/freescale/t1040qds/t1040qds.c delete mode 100644 board/freescale/t1040qds/t1040qds.h delete mode 100644 board/freescale/t1040qds/t1040qds_qixis.h delete mode 100644 board/freescale/t1040qds/tlb.c delete mode 100644 board/freescale/t4qds/Kconfig delete mode 100644 board/freescale/t4qds/MAINTAINERS delete mode 100644 board/freescale/t4qds/Makefile delete mode 100644 board/freescale/t4qds/README delete mode 100644 board/freescale/t4qds/ddr.c delete mode 100644 board/freescale/t4qds/ddr.h delete mode 100644 board/freescale/t4qds/eth.c delete mode 100644 board/freescale/t4qds/law.c delete mode 100644 board/freescale/t4qds/pci.c delete mode 100644 board/freescale/t4qds/spl.c delete mode 100644 board/freescale/t4qds/t4240emu.c delete mode 100644 board/freescale/t4qds/t4240qds.c delete mode 100644 board/freescale/t4qds/t4240qds_qixis.h delete mode 100644 board/freescale/t4qds/t4_nand_rcw.cfg delete mode 100644 board/freescale/t4qds/t4_pbi.cfg delete mode 100644 board/freescale/t4qds/t4_sd_rcw.cfg delete mode 100644 board/freescale/t4qds/t4qds.h delete mode 100644 board/freescale/t4qds/tlb.c delete mode 100644 configs/B4420QDS_NAND_defconfig delete mode 100644 configs/B4420QDS_SPIFLASH_defconfig delete mode 100644 configs/B4420QDS_defconfig delete mode 100644 configs/B4860QDS_NAND_defconfig delete mode 100644 configs/B4860QDS_SECURE_BOOT_defconfig delete mode 100644 configs/B4860QDS_SPIFLASH_defconfig delete mode 100644 configs/B4860QDS_SRIO_PCIE_BOOT_defconfig delete mode 100644 configs/B4860QDS_defconfig delete mode 100644 configs/BSC9131RDB_NAND_SYSCLK100_defconfig delete mode 100644 configs/BSC9131RDB_NAND_defconfig delete mode 100644 configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig delete mode 100644 configs/BSC9131RDB_SPIFLASH_defconfig delete mode 100644 configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig delete mode 100644 configs/BSC9132QDS_NAND_DDRCLK100_defconfig delete mode 100644 configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig delete mode 100644 configs/BSC9132QDS_NAND_DDRCLK133_defconfig delete mode 100644 configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig delete mode 100644 configs/BSC9132QDS_NOR_DDRCLK100_defconfig delete mode 100644 configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig delete mode 100644 configs/BSC9132QDS_NOR_DDRCLK133_defconfig delete mode 100644 configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig delete mode 100644 configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig delete mode 100644 configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig delete mode 100644 configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig delete mode 100644 configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig delete mode 100644 configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig delete mode 100644 configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig delete mode 100644 configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig delete mode 100644 configs/C29XPCIE_NAND_defconfig delete mode 100644 configs/C29XPCIE_NOR_SECBOOT_defconfig delete mode 100644 configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig delete mode 100644 configs/C29XPCIE_SPIFLASH_defconfig delete mode 100644 configs/C29XPCIE_defconfig delete mode 100644 configs/MPC8536DS_36BIT_defconfig delete mode 100644 configs/MPC8536DS_SDCARD_defconfig delete mode 100644 configs/MPC8536DS_SPIFLASH_defconfig delete mode 100644 configs/MPC8536DS_defconfig delete mode 100644 configs/P1022DS_36BIT_NAND_defconfig delete mode 100644 configs/P1022DS_36BIT_SDCARD_defconfig delete mode 100644 configs/P1022DS_36BIT_SPIFLASH_defconfig delete mode 100644 configs/P1022DS_36BIT_defconfig delete mode 100644 configs/P1022DS_NAND_defconfig delete mode 100644 configs/P1022DS_SDCARD_defconfig delete mode 100644 configs/P1022DS_SPIFLASH_defconfig delete mode 100644 configs/P1022DS_defconfig delete mode 100644 configs/T1024QDS_DDR4_SECURE_BOOT_defconfig delete mode 100644 configs/T1024QDS_DDR4_defconfig delete mode 100644 configs/T1024QDS_NAND_defconfig delete mode 100644 configs/T1024QDS_SDCARD_defconfig delete mode 100644 configs/T1024QDS_SECURE_BOOT_defconfig delete mode 100644 configs/T1024QDS_SPIFLASH_defconfig delete mode 100644 configs/T1024QDS_defconfig delete mode 100644 configs/T1040QDS_DDR4_defconfig delete mode 100644 configs/T1040QDS_SECURE_BOOT_defconfig delete mode 100644 configs/T1040QDS_defconfig delete mode 100644 configs/T4160QDS_NAND_defconfig delete mode 100644 configs/T4160QDS_SDCARD_defconfig delete mode 100644 configs/T4160QDS_SECURE_BOOT_defconfig delete mode 100644 configs/T4160QDS_defconfig delete mode 100644 configs/T4240QDS_NAND_defconfig delete mode 100644 configs/T4240QDS_SDCARD_defconfig delete mode 100644 configs/T4240QDS_SECURE_BOOT_defconfig delete mode 100644 configs/T4240QDS_SRIO_PCIE_BOOT_defconfig delete mode 100644 configs/T4240QDS_defconfig delete mode 100644 configs/TWR-P1025_defconfig delete mode 100644 include/configs/B4860QDS.h delete mode 100644 include/configs/BSC9131RDB.h delete mode 100644 include/configs/BSC9132QDS.h delete mode 100644 include/configs/C29XPCIE.h delete mode 100644 include/configs/MPC8536DS.h delete mode 100644 include/configs/P1022DS.h delete mode 100644 include/configs/T102xQDS.h delete mode 100644 include/configs/T1040QDS.h delete mode 100644 include/configs/T4240QDS.h delete mode 100644 include/configs/p1_twr.h -- 2.25.1

1 11

[PATCH] phy: atheros: ar8035: Fix clock output calculation
by Fabio Estevam 18 Jun '20

18 Jun '20

The "qca,clk-out-frequency" is calculated incorrectly for AR8035 due to incorrect masking of priv->clk_25m_reg and priv->clk_25m_mask. This same issue has been already fixed in the kernel by: commit b1f4c209d84057b6d40b939b6e4404854271d797 Author: Oleksij Rempel <o.rempel(a)pengutronix.de> Date: Wed Apr 1 11:57:32 2020 +0200 net: phy: at803x: fix clock sink configuration on ATH8030 and ATH8035 The masks in priv->clk_25m_reg and priv->clk_25m_mask are one-bits-set for the values that comprise the fields, not zero-bits-set. This patch fixes the clock frequency configuration for ATH8030 and ATH8035 Atheros PHYs by removing the erroneous "~". To reproduce this bug, configure the PHY with the device tree binding "qca,clk-out-frequency" and remove the machine specific PHY fixups. Fixes: 2f664823a47021 ("net: phy: at803x: add device tree binding") Signed-off-by: Oleksij Rempel <o.rempel(a)pengutronix.de> Reported-by: Russell King <rmk+kernel(a)armlinux.org.uk> Reviewed-by: Russell King <rmk+kernel(a)armlinux.org.uk> Tested-by: Russell King <rmk+kernel(a)armlinux.org.uk> Signed-off-by: David S. Miller <davem(a)davemloft.net> Apply the same fix in the U-Boot driver. Tested on a i.MX6 Hummingboard. Reported-by: Tom Rini <trini(a)konsulko.com> Signed-off-by: Fabio Estevam <festevam(a)gmail.com> --- drivers/net/phy/atheros.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c index 13f7275d17..f922fecd6b 100644 --- a/drivers/net/phy/atheros.c +++ b/drivers/net/phy/atheros.c @@ -275,11 +275,10 @@ static int ar803x_of_init(struct phy_device *phydev) * Fixup for the AR8035 which only has two bits. The two * remaining bits map to the same frequencies. */ - if (phydev->drv->uid == AR8035_PHY_ID) { - u16 clear = AR803x_CLK_25M_MASK & AR8035_CLK_25M_MASK; - priv->clk_25m_mask &= ~clear; - priv->clk_25m_reg &= ~clear; + if (phydev->drv->uid == AR8035_PHY_ID) { + priv->clk_25m_reg &= AR8035_CLK_25M_MASK; + priv->clk_25m_mask &= AR8035_CLK_25M_MASK; } } -- 2.17.1

3 3

[PATCH 1/2] board: ti: am57xx: use GPIO_TO_PIN() to define GPIO number
by Luca Ceresoli 18 Jun '20

18 Jun '20

Using the macro makes code readable without the need for a comment. Signed-off-by: Luca Ceresoli <luca(a)lucaceresoli.net> --- board/ti/am57xx/board.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c index 8720eb87a55d..c41aa24f957b 100644 --- a/board/ti/am57xx/board.c +++ b/board/ti/am57xx/board.c @@ -68,8 +68,7 @@ static int board_bootmode_has_emmc(void); DECLARE_GLOBAL_DATA_PTR; #define GPIO_ETH_LCD GPIO_TO_PIN(2, 22) -/* GPIO 7_11 */ -#define GPIO_DDR_VTT_EN 203 +#define GPIO_DDR_VTT_EN GPIO_TO_PIN(7, 11) /* Touch screen controller to identify the LCD */ #define OSD_TS_FT_BUS_ADDRESS 0 -- 2.26.2

2 2

[PATCH] mmc: davinci_mmc: Cleanup to use dt in U-boot and static platdata in SPL
by Faiz Abbas 18 Jun '20

18 Jun '20

Cleanup this driver to use dt in U-boot and static platdata in SPL. This requires the following steps: 1. Move all platdata assignment from probe() to ofdata_to_platdata(). This function is only called in U-boot. 2. Replicate all the platdata assignment being done in ofdata_to_platdata() in the omapl138 board file. This data is used in the SPL case where SPL_OF_CONTROL is not enabled. 3. Remove SPL_OF_CONTROL and related configs from omapl138_lcdk_defconfig This cleanup effectively reverts 3ef94715cc ('mmc: davinci: fix mmc boot in SPL') Signed-off-by: Faiz Abbas <faiz_abbas(a)ti.com> --- This patch fixes things being broken by Simon's series disabling libfdt when using of-platdata: https://patchwork.ozlabs.org/project/uboot/cover/20191107155318.103300-1-sj… .../mach-davinci/include/mach/sdmmc_defs.h | 7 +++ board/davinci/da8xxevm/omapl138_lcdk.c | 12 ++++ configs/omapl138_lcdk_defconfig | 4 -- drivers/mmc/davinci_mmc.c | 63 ++++++++----------- 4 files changed, 45 insertions(+), 41 deletions(-) diff --git a/arch/arm/mach-davinci/include/mach/sdmmc_defs.h b/arch/arm/mach-davinci/include/mach/sdmmc_defs.h index 46f6391aa2..f95a607e52 100644 --- a/arch/arm/mach-davinci/include/mach/sdmmc_defs.h +++ b/arch/arm/mach-davinci/include/mach/sdmmc_defs.h @@ -152,6 +152,13 @@ struct davinci_mmc { struct mmc_config cfg; }; +#define DAVINCI_MAX_BLOCKS (32) +struct davinci_mmc_plat { + struct davinci_mmc_regs *reg_base; /* Register base address */ + struct mmc_config cfg; + struct mmc mmc; +}; + int davinci_mmc_init(bd_t *bis, struct davinci_mmc *host); #endif /* _SDMMC_DEFS_H */ diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c index adb56c6c87..84603cb117 100644 --- a/board/davinci/da8xxevm/omapl138_lcdk.c +++ b/board/davinci/da8xxevm/omapl138_lcdk.c @@ -368,8 +368,20 @@ U_BOOT_DEVICE(omapl138_uart) = { .platdata = &serial_pdata, }; +static const struct davinci_mmc_plat mmc_platdata = { + .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE, + .cfg = { + .f_min = 200000, + .f_max = 25000000, + .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, + .host_caps = MMC_MODE_4BIT, + .b_max = DAVINCI_MAX_BLOCKS, + .name = "da830-mmc", + }, +}; U_BOOT_DEVICE(omapl138_mmc) = { .name = "davinci_mmc", + .platdata = &mmc_platdata, }; void spl_board_init(void) diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig index 50cf09c7f1..b0a58de03d 100644 --- a/configs/omapl138_lcdk_defconfig +++ b/configs/omapl138_lcdk_defconfig @@ -40,16 +40,13 @@ CONFIG_CMD_MTDPARTS=y CONFIG_CMD_DIAG=y CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="da850-lcdk" -CONFIG_SPL_OF_PLATDATA=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SPL_OF_TRANSLATE=y CONFIG_DA8XX_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_DAVINCI=y @@ -82,4 +79,3 @@ CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_DA8XX=y CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y -# CONFIG_SPL_OF_LIBFDT is not set diff --git a/drivers/mmc/davinci_mmc.c b/drivers/mmc/davinci_mmc.c index 2408a687d2..4ef9f7cc8b 100644 --- a/drivers/mmc/davinci_mmc.c +++ b/drivers/mmc/davinci_mmc.c @@ -18,7 +18,6 @@ #include <asm-generic/gpio.h> #include <linux/delay.h> -#define DAVINCI_MAX_BLOCKS (32) #define WATCHDOG_COUNT (100000) #define get_val(addr) REG(addr) @@ -34,12 +33,6 @@ struct davinci_mmc_priv { struct gpio_desc cd_gpio; /* Card Detect GPIO */ struct gpio_desc wp_gpio; /* Write Protect GPIO */ }; - -struct davinci_mmc_plat -{ - struct mmc_config cfg; - struct mmc mmc; -}; #endif /* Set davinci clock prescalar value based on the required clock in HZ */ @@ -487,43 +480,16 @@ static int davinci_mmc_probe(struct udevice *dev) struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); struct davinci_mmc_plat *plat = dev_get_platdata(dev); struct davinci_mmc_priv *priv = dev_get_priv(dev); - struct mmc_config *cfg = &plat->cfg; -#ifdef CONFIG_SPL_BUILD - int ret; -#endif - - cfg->f_min = 200000; - cfg->f_max = 25000000; - cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34, - cfg->host_caps = MMC_MODE_4BIT, /* DA850 supports only 4-bit SD/MMC */ - cfg->b_max = DAVINCI_MAX_BLOCKS; - cfg->name = "da830-mmc"; - priv->reg_base = (struct davinci_mmc_regs *)dev_read_addr(dev); + priv->reg_base = plat->reg_base; priv->input_clk = clk_get(DAVINCI_MMCSD_CLKID); - #if CONFIG_IS_ENABLED(DM_GPIO) /* These GPIOs are optional */ gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio, GPIOD_IS_IN); gpio_request_by_name(dev, "wp-gpios", 0, &priv->wp_gpio, GPIOD_IS_IN); #endif - upriv->mmc = &plat->mmc; -#ifdef CONFIG_SPL_BUILD - /* - * FIXME This is a temporary workaround to enable the driver model in - * SPL on omapl138-lcdk. For some reason the bind() callback is not - * being called in SPL for MMC which breaks the mmc boot - the hack - * is to call mmc_bind() from probe(). We also don't have full DT - * support in SPL, hence the hard-coded base register address. - */ - priv->reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE; - ret = mmc_bind(dev, &plat->mmc, &plat->cfg); - if (ret) - return ret; -#endif - return davinci_dm_mmc_init(dev); } @@ -534,21 +500,44 @@ static int davinci_mmc_bind(struct udevice *dev) return mmc_bind(dev, &plat->mmc, &plat->cfg); } +#if CONFIG_IS_ENABLED(OF_CONTROL) +static int davinci_mmc_ofdata_to_platdata(struct udevice *dev) +{ + struct davinci_mmc_plat *plat = dev_get_platdata(dev); + struct mmc_config *cfg = &plat->cfg; + + plat->reg_base = (struct davinci_mmc_regs *)dev_read_addr(dev); + cfg->f_min = 200000; + cfg->f_max = 25000000; + cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34, + cfg->host_caps = MMC_MODE_4BIT, /* DA850 supports only 4-bit SD/MMC */ + cfg->b_max = DAVINCI_MAX_BLOCKS; + cfg->name = "da830-mmc"; + + return 0; +} + static const struct udevice_id davinci_mmc_ids[] = { { .compatible = "ti,da830-mmc" }, {}, }; - +#endif U_BOOT_DRIVER(davinci_mmc_drv) = { .name = "davinci_mmc", .id = UCLASS_MMC, +#if CONFIG_IS_ENABLED(OF_CONTROL) .of_match = davinci_mmc_ids, + .platdata_auto_alloc_size = sizeof(struct davinci_mmc_plat), + .ofdata_to_platdata = davinci_mmc_ofdata_to_platdata, +#endif #if CONFIG_BLK .bind = davinci_mmc_bind, #endif .probe = davinci_mmc_probe, .ops = &davinci_mmc_ops, - .platdata_auto_alloc_size = sizeof(struct davinci_mmc_plat), .priv_auto_alloc_size = sizeof(struct davinci_mmc_priv), +#if !CONFIG_IS_ENABLED(OF_CONTROL) + .flags = DM_FLAG_PRE_RELOC, +#endif }; #endif -- 2.17.1

4 8

[PATCH] Nokia RX-51: Fix checking if serial console was enabled
by Pali Rohár 18 Jun '20

18 Jun '20

There was incorrect logic for parsing OMAP_TAG_UART atag. Signed-off-by: Pali Rohár <pali(a)kernel.org> --- board/nokia/rx51/rx51.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c index 2af387edc9..823316ea47 100644 --- a/board/nokia/rx51/rx51.c +++ b/board/nokia/rx51/rx51.c @@ -146,7 +146,7 @@ static void reuse_omap_atags(struct tag_omap *t) } break; case OMAP_TAG_UART: - if (!t->u.uart.enabled_uarts) + if (t->u.uart.enabled_uarts) serial_was_console_enabled = 1; break; case OMAP_TAG_SERIAL_CONSOLE: -- 2.20.1

2 1