From: Suneel Garapati <sgarapati(a)marvell.com>
Add support for I2C controllers found on Octeon II/III and Octeon TX
TX2 SoC platforms.
Signed-off-by: Aaron Williams <awilliams(a)marvell.com>
Signed-off-by: Suneel Garapati <sgarapati(a)marvell.com>
Signed-off-by: Stefan Roese <sr(a)denx.de>
Cc: Heiko Schocher <hs(a)denx.de>
Cc: Simon Glass <sjg(a)chromium.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck(a)gmail.com>
Cc: Aaron Williams <awilliams(a)marvell.com>
Cc: Chandrakala Chavva <cchavva(a)marvell.com>
---
v2 (Stefan):
- Added clk framework support and dropped ad-hoc clock code
- Removed #ifdef's for Octeon vs OcteonTX/TX2 completely
The differentiation is now made via driver data / compatible
string
- Added device-tree bindings documentation
- Removed unused macro
RFC -> v1 (Stefan):
- Separated this patch from the OcteonTX/TX2 RFC patch series into a
single patch. This is useful, as the upcoming MIPS Octeon support will
use this I2C driver.
- Added MIPS Octeon II/III support (big endian). Rename driver and its
function names from "octeontx" to "octeon" to better match all Octeon
platforms.
- Moved from union to defines / bitmasks as suggested by Simon. This makes
the driver usage on little- and big-endian platforms much easier.
- Enhanced Kconfig text
- Removed all clock macros (use values from DT)
- Removed long driver debug strings. This is only available when a debug
version of this driver is built. The user / developer can lookup the
descriptive error messages in the driver in this case anyway.
- Removed static "last_id"
- Dropped misc blank lines. Misc reformatting.
- Dropped "!= 0"
- Added missing function comments
- Added missing strut comments
- Changed comment style
- Renames "result" to "ret"
- Hex numbers uppercase
- Minor other changes
- Reword commit text and subject
doc/device-tree-bindings/i2c/octeon-i2c.txt | 24 +
drivers/i2c/Kconfig | 10 +
drivers/i2c/Makefile | 1 +
drivers/i2c/octeon_i2c.c | 847 ++++++++++++++++++++
4 files changed, 882 insertions(+)
create mode 100644 doc/device-tree-bindings/i2c/octeon-i2c.txt
create mode 100644 drivers/i2c/octeon_i2c.c
diff --git a/doc/device-tree-bindings/i2c/octeon-i2c.txt b/doc/device-tree-bindings/i2c/octeon-i2c.txt
new file mode 100644
index 0000000000..9c1908ec2c
--- /dev/null
+++ b/doc/device-tree-bindings/i2c/octeon-i2c.txt
@@ -0,0 +1,24 @@
+* I2C controller embedded in Marvell Octeon platforms
+
+Required properties :
+- compatible : Must be "cavium,octeon-7890-twsi" or a compatible string
+- reg : Offset and length of the register set for the device
+- clocks: Must contain the input clock of the I2C instance
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties :
+- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified,
+ the default 100 kHz frequency will be used. As only Normal, Fast and Fast+
+ modes are implemented, possible values are 100000, 400000 and 1000000.
+
+Example :
+
+ i2c0: i2c@1180000001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cavium,octeon-7890-twsi";
+ reg = <0x11800 0x00001000 0x0 0x200>;
+ clock-frequency = <100000>;
+ clocks = <&sclk>;
+ };
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index f8b18de8f3..363b899e9c 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -374,6 +374,16 @@ config SYS_I2C_SANDBOX
bus. Devices can be attached to the bus using the device tree
which specifies the driver to use. See sandbox.dts as an example.
+config SYS_I2C_OCTEON
+ bool "Octeon II/III/TX/TX2 I2C driver"
+ depends on (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2) && DM_I2C
+ default y
+ help
+ Add support for the Marvell Octeon I2C driver. This is used with
+ various Octeon parts such as Octeon II/III and OcteonTX/TX2. All
+ chips have several I2C ports and all are provided, controlled by
+ the device tree.
+
config SYS_I2C_S3C24X0
bool "Samsung I2C driver"
depends on ARCH_EXYNOS4 && DM_I2C
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 62935b7ebc..2b58aae892 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_SYS_I2C_LPC32XX) += lpc32xx_i2c.o
obj-$(CONFIG_SYS_I2C_MESON) += meson_i2c.o
obj-$(CONFIG_SYS_I2C_MVTWSI) += mvtwsi.o
obj-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o
+obj-$(CONFIG_SYS_I2C_OCTEON) += octeon_i2c.o
obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o
obj-$(CONFIG_SYS_I2C_RCAR_I2C) += rcar_i2c.o
obj-$(CONFIG_SYS_I2C_RCAR_IIC) += rcar_iic.o
diff --git a/drivers/i2c/octeon_i2c.c b/drivers/i2c/octeon_i2c.c
new file mode 100644
index 0000000000..c11d6ff93d
--- /dev/null
+++ b/drivers/i2c/octeon_i2c.c
@@ -0,0 +1,847 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <i2c.h>
+#include <pci_ids.h>
+#include <asm/io.h>
+#include <linux/bitfield.h>
+#include <linux/compat.h>
+#include <linux/delay.h>
+
+#define TWSI_SW_TWSI 0x00
+#define TWSI_TWSI_SW 0x08
+#define TWSI_INT 0x10
+#define TWSI_SW_TWSI_EXT 0x18
+
+#define TWSI_SW_DATA_MASK GENMASK_ULL(31, 0)
+#define TWSI_SW_EOP_IA_MASK GENMASK_ULL(34, 32)
+#define TWSI_SW_IA_MASK GENMASK_ULL(39, 35)
+#define TWSI_SW_ADDR_MASK GENMASK_ULL(49, 40)
+#define TWSI_SW_SCR_MASK GENMASK_ULL(51, 50)
+#define TWSI_SW_SIZE_MASK GENMASK_ULL(54, 52)
+#define TWSI_SW_SOVR BIT_ULL(55)
+#define TWSI_SW_R BIT_ULL(56)
+#define TWSI_SW_OP_MASK GENMASK_ULL(60, 57)
+#define TWSI_SW_EIA GENMASK_ULL(61)
+#define TWSI_SW_SLONLY BIT_ULL(62)
+#define TWSI_SW_V BIT_ULL(63)
+
+#define TWSI_INT_SDA_OVR BIT_ULL(8)
+#define TWSI_INT_SCL_OVR BIT_ULL(9)
+#define TWSI_INT_SDA BIT_ULL(10)
+#define TWSI_INT_SCL BIT_ULL(11)
+
+enum {
+ TWSI_OP_WRITE = 0,
+ TWSI_OP_READ = 1,
+};
+
+enum {
+ TWSI_EOP_SLAVE_ADDR = 0,
+ TWSI_EOP_CLK_CTL = 3,
+ TWSI_SW_EOP_IA = 6,
+};
+
+enum {
+ TWSI_SLAVEADD = 0,
+ TWSI_DATA = 1,
+ TWSI_CTL = 2,
+ TWSI_CLKCTL = 3,
+ TWSI_STAT = 3,
+ TWSI_SLAVEADD_EXT = 4,
+ TWSI_RST = 7,
+};
+
+enum {
+ TWSI_CTL_AAK = BIT(2),
+ TWSI_CTL_IFLG = BIT(3),
+ TWSI_CTL_STP = BIT(4),
+ TWSI_CTL_STA = BIT(5),
+ TWSI_CTL_ENAB = BIT(6),
+ TWSI_CTL_CE = BIT(7),
+};
+
+/*
+ * Internal errors. When debugging is enabled, the driver will report the
+ * error number and the user / developer can check the table below for the
+ * detailed error description.
+ */
+enum {
+ /** Bus error */
+ TWSI_STAT_BUS_ERROR = 0x00,
+ /** Start condition transmitted */
+ TWSI_STAT_START = 0x08,
+ /** Repeat start condition transmitted */
+ TWSI_STAT_RSTART = 0x10,
+ /** Address + write bit transmitted, ACK received */
+ TWSI_STAT_TXADDR_ACK = 0x18,
+ /** Address + write bit transmitted, /ACK received */
+ TWSI_STAT_TXADDR_NAK = 0x20,
+ /** Data byte transmitted in master mode, ACK received */
+ TWSI_STAT_TXDATA_ACK = 0x28,
+ /** Data byte transmitted in master mode, ACK received */
+ TWSI_STAT_TXDATA_NAK = 0x30,
+ /** Arbitration lost in address or data byte */
+ TWSI_STAT_TX_ARB_LOST = 0x38,
+ /** Address + read bit transmitted, ACK received */
+ TWSI_STAT_RXADDR_ACK = 0x40,
+ /** Address + read bit transmitted, /ACK received */
+ TWSI_STAT_RXADDR_NAK = 0x48,
+ /** Data byte received in master mode, ACK transmitted */
+ TWSI_STAT_RXDATA_ACK_SENT = 0x50,
+ /** Data byte received, NACK transmitted */
+ TWSI_STAT_RXDATA_NAK_SENT = 0x58,
+ /** Slave address received, sent ACK */
+ TWSI_STAT_SLAVE_RXADDR_ACK = 0x60,
+ /**
+ * Arbitration lost in address as master, slave address + write bit
+ * received, ACK transmitted
+ */
+ TWSI_STAT_TX_ACK_ARB_LOST = 0x68,
+ /** General call address received, ACK transmitted */
+ TWSI_STAT_RX_GEN_ADDR_ACK = 0x70,
+ /**
+ * Arbitration lost in address as master, general call address
+ * received, ACK transmitted
+ */
+ TWSI_STAT_RX_GEN_ADDR_ARB_LOST = 0x78,
+ /** Data byte received after slave address received, ACK transmitted */
+ TWSI_STAT_SLAVE_RXDATA_ACK = 0x80,
+ /** Data byte received after slave address received, /ACK transmitted */
+ TWSI_STAT_SLAVE_RXDATA_NAK = 0x88,
+ /**
+ * Data byte received after general call address received, ACK
+ * transmitted
+ */
+ TWSI_STAT_GEN_RXADDR_ACK = 0x90,
+ /**
+ * Data byte received after general call address received, /ACK
+ * transmitted
+ */
+ TWSI_STAT_GEN_RXADDR_NAK = 0x98,
+ /** STOP or repeated START condition received in slave mode */
+ TWSI_STAT_STOP_MULTI_START = 0xa0,
+ /** Slave address + read bit received, ACK transmitted */
+ TWSI_STAT_SLAVE_RXADDR2_ACK = 0xa8,
+ /**
+ * Arbitration lost in address as master, slave address + read bit
+ * received, ACK transmitted
+ */
+ TWSI_STAT_RXDATA_ACK_ARB_LOST = 0xb0,
+ /** Data byte transmitted in slave mode, ACK received */
+ TWSI_STAT_SLAVE_TXDATA_ACK = 0xb8,
+ /** Data byte transmitted in slave mode, /ACK received */
+ TWSI_STAT_SLAVE_TXDATA_NAK = 0xc0,
+ /** Last byte transmitted in slave mode, ACK received */
+ TWSI_STAT_SLAVE_TXDATA_END_ACK = 0xc8,
+ /** Second address byte + write bit transmitted, ACK received */
+ TWSI_STAT_TXADDR2DATA_ACK = 0xd0,
+ /** Second address byte + write bit transmitted, /ACK received */
+ TWSI_STAT_TXADDR2DATA_NAK = 0xd8,
+ /** No relevant status information */
+ TWSI_STAT_IDLE = 0xf8
+};
+
+#define CONFIG_SYS_I2C_OCTEON_SLAVE_ADDR 0x77
+
+enum {
+ PROBE_PCI = 0, /* PCI based probing */
+ PROBE_DT, /* DT based probing */
+};
+
+enum {
+ CLK_METHOD_OCTEON = 0,
+ CLK_METHOD_OCTEONTX2,
+};
+
+/**
+ * struct octeon_i2c_data - SoC specific data of this driver
+ *
+ * @probe: Probing of this SoC (DT vs PCI)
+ * @reg_offs: Register offset
+ * @thp: THP define for divider calculation
+ * @clk_method: Clock calculation method
+ */
+struct octeon_i2c_data {
+ int probe;
+ u32 reg_offs;
+ int thp;
+ int clk_method;
+};
+
+/**
+ * struct octeon_twsi - Private data of this driver
+ *
+ * @base: Base address of i2c registers
+ * @data: Pointer to SoC specific data struct
+ */
+struct octeon_twsi {
+ void __iomem *base;
+ const struct octeon_i2c_data *data;
+ struct clk clk;
+};
+
+static void twsi_unblock(void *base);
+static int twsi_stop(void *base);
+
+/**
+ * Returns true if we lost arbitration
+ *
+ * @code status code
+ * @final_read true if this is the final read operation
+ * @return true if arbitration has been lost, false if it hasn't been lost.
+ */
+static int twsi_i2c_lost_arb(u8 code, int final_read)
+{
+ switch (code) {
+ case TWSI_STAT_TX_ARB_LOST:
+ case TWSI_STAT_TX_ACK_ARB_LOST:
+ case TWSI_STAT_RX_GEN_ADDR_ARB_LOST:
+ case TWSI_STAT_RXDATA_ACK_ARB_LOST:
+ /* Arbitration lost */
+ return -EAGAIN;
+
+ case TWSI_STAT_SLAVE_RXADDR_ACK:
+ case TWSI_STAT_RX_GEN_ADDR_ACK:
+ case TWSI_STAT_GEN_RXADDR_ACK:
+ case TWSI_STAT_GEN_RXADDR_NAK:
+ /* Being addressed as slave, should back off and listen */
+ return -EIO;
+
+ case TWSI_STAT_SLAVE_RXDATA_ACK:
+ case TWSI_STAT_SLAVE_RXDATA_NAK:
+ case TWSI_STAT_STOP_MULTI_START:
+ case TWSI_STAT_SLAVE_RXADDR2_ACK:
+ case TWSI_STAT_SLAVE_TXDATA_ACK:
+ case TWSI_STAT_SLAVE_TXDATA_NAK:
+ case TWSI_STAT_SLAVE_TXDATA_END_ACK:
+ /* Core busy as slave */
+ return -EIO;
+
+ case TWSI_STAT_RXDATA_ACK_SENT:
+ /* Ack allowed on pre-terminal bytes only */
+ if (!final_read)
+ return 0;
+ return -EAGAIN;
+
+ case TWSI_STAT_RXDATA_NAK_SENT:
+ /* NAK allowed on terminal byte only */
+ if (!final_read)
+ return 0;
+ return -EAGAIN;
+
+ case TWSI_STAT_TXDATA_NAK:
+ case TWSI_STAT_TXADDR_NAK:
+ case TWSI_STAT_RXADDR_NAK:
+ case TWSI_STAT_TXADDR2DATA_NAK:
+ return -EAGAIN;
+ }
+
+ return 0;
+}
+
+/**
+ * Writes to the MIO_TWS(0..5)_SW_TWSI register
+ *
+ * @base Base address of i2c registers
+ * @val value to write
+ * @return 0 for success, otherwise error
+ */
+static u64 twsi_write_sw(void __iomem *base, u64 val)
+{
+ unsigned long start = get_timer(0);
+
+ val &= ~TWSI_SW_R;
+ val |= TWSI_SW_V;
+
+ debug("%s(%p, 0x%llx)\n", __func__, base, val);
+ writeq(val, base + TWSI_SW_TWSI);
+ do {
+ val = readq(base + TWSI_SW_TWSI);
+ } while ((val & TWSI_SW_V) && (get_timer(start) < 50));
+
+ if (val & TWSI_SW_V)
+ debug("%s: timed out\n", __func__);
+ return val;
+}
+
+/**
+ * Reads the MIO_TWS(0..5)_SW_TWSI register
+ *
+ * @base Base address of i2c registers
+ * @val value for eia and op, etc. to read
+ * @return value of the register
+ */
+static u64 twsi_read_sw(void __iomem *base, u64 val)
+{
+ unsigned long start = get_timer(0);
+
+ val |= TWSI_SW_R | TWSI_SW_V;
+
+ debug("%s(%p, 0x%llx)\n", __func__, base, val);
+ writeq(val, base + TWSI_SW_TWSI);
+
+ do {
+ val = readq(base + TWSI_SW_TWSI);
+ } while ((val & TWSI_SW_V) && (get_timer(start) < 50));
+
+ if (val & TWSI_SW_V)
+ debug("%s: Error writing 0x%llx\n", __func__, val);
+
+ debug("%s: Returning 0x%llx\n", __func__, val);
+ return val;
+}
+
+/**
+ * Write control register
+ *
+ * @base Base address for i2c registers
+ * @data data to write
+ */
+static void twsi_write_ctl(void __iomem *base, u8 data)
+{
+ u64 val;
+
+ debug("%s(%p, 0x%x)\n", __func__, base, data);
+ val = data | FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_CTL) |
+ FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
+ twsi_write_sw(base, val);
+}
+
+/**
+ * Reads the TWSI Control Register
+ *
+ * @base Base address for i2c
+ * @return 8-bit TWSI control register
+ */
+static u8 twsi_read_ctl(void __iomem *base)
+{
+ u64 val;
+
+ val = FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_CTL) |
+ FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
+ val = twsi_read_sw(base, val);
+
+ debug("%s(%p): 0x%x\n", __func__, base, (u8)val);
+ return (u8)val;
+}
+
+/**
+ * Read i2c status register
+ *
+ * @base Base address of i2c registers
+ * @return value of status register
+ */
+static u8 twsi_read_status(void __iomem *base)
+{
+ u64 val;
+
+ val = FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_STAT) |
+ FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
+
+ return twsi_read_sw(base, val);
+}
+
+/**
+ * Waits for an i2c operation to complete
+ *
+ * @param base Base address of registers
+ * @return 0 for success, 1 if timeout
+ */
+static int twsi_wait(void __iomem *base)
+{
+ unsigned long start = get_timer(0);
+ u8 twsi_ctl;
+
+ debug("%s(%p)\n", __func__, base);
+ do {
+ twsi_ctl = twsi_read_ctl(base);
+ twsi_ctl &= TWSI_CTL_IFLG;
+ } while (!twsi_ctl && get_timer(start) < 50);
+
+ debug(" return: %u\n", !twsi_ctl);
+ return !twsi_ctl;
+}
+
+/**
+ * Unsticks the i2c bus
+ *
+ * @base base address of registers
+ */
+static int twsi_start_unstick(void __iomem *base)
+{
+ twsi_stop(base);
+ twsi_unblock(base);
+
+ return 0;
+}
+
+/**
+ * Sends an i2c start condition
+ *
+ * @base base address of registers
+ * @return 0 for success, otherwise error
+ */
+static int twsi_start(void __iomem *base)
+{
+ int ret;
+ u8 stat;
+
+ debug("%s(%p)\n", __func__, base);
+ twsi_write_ctl(base, TWSI_CTL_STA | TWSI_CTL_ENAB);
+ ret = twsi_wait(base);
+ if (ret) {
+ stat = twsi_read_status(base);
+ debug("%s: ret: 0x%x, status: 0x%x\n", __func__, ret, stat);
+ switch (stat) {
+ case TWSI_STAT_START:
+ case TWSI_STAT_RSTART:
+ return 0;
+ case TWSI_STAT_RXADDR_ACK:
+ default:
+ return twsi_start_unstick(base);
+ }
+ }
+
+ debug("%s: success\n", __func__);
+ return 0;
+}
+
+/**
+ * Sends an i2c stop condition
+ *
+ * @base register base address
+ * @return 0 for success, -1 if error
+ */
+static int twsi_stop(void __iomem *base)
+{
+ u8 stat;
+
+ twsi_write_ctl(base, TWSI_CTL_STP | TWSI_CTL_ENAB);
+
+ stat = twsi_read_status(base);
+ if (stat != TWSI_STAT_IDLE) {
+ debug("%s: Bad status on bus@%p\n", __func__, base);
+ return -1;
+ }
+
+ return 0;
+}
+
+/**
+ * Writes data to the i2c bus
+ *
+ * @base register base address
+ * @slave_addr address of slave to write to
+ * @buffer Pointer to buffer to write
+ * @length Number of bytes in buffer to write
+ * @return 0 for success, otherwise error
+ */
+static int twsi_write_data(void __iomem *base, u8 slave_addr,
+ u8 *buffer, unsigned int length)
+{
+ unsigned int curr = 0;
+ u64 val;
+ int ret;
+
+ debug("%s(%p, 0x%x, %p, 0x%x)\n", __func__, base, slave_addr,
+ buffer, length);
+ ret = twsi_start(base);
+ if (ret) {
+ debug("%s: Could not start BUS transaction\n", __func__);
+ return -1;
+ }
+
+ ret = twsi_wait(base);
+ if (ret) {
+ debug("%s: wait failed\n", __func__);
+ return ret;
+ }
+
+ val = (u32)(slave_addr << 1) | TWSI_OP_WRITE |
+ FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_DATA) |
+ FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
+ twsi_write_sw(base, val);
+ twsi_write_ctl(base, TWSI_CTL_ENAB);
+
+ debug("%s: Waiting\n", __func__);
+ ret = twsi_wait(base);
+ if (ret) {
+ debug("%s: Timed out writing slave address 0x%x to target\n",
+ __func__, slave_addr);
+ return ret;
+ }
+
+ ret = twsi_read_status(base);
+ debug("%s: status: 0x%x\n", __func__, ret);
+ if (ret != TWSI_STAT_TXADDR_ACK) {
+ debug("%s: status: 0x%x\n", __func__, ret);
+ twsi_stop(base);
+ return twsi_i2c_lost_arb(ret, 0);
+ }
+
+ while (curr < length) {
+ val = buffer[curr++] |
+ FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_DATA) |
+ FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
+ twsi_write_sw(base, val);
+ twsi_write_ctl(base, TWSI_CTL_ENAB);
+
+ debug("%s: Writing 0x%llx\n", __func__, val);
+
+ ret = twsi_wait(base);
+ if (ret) {
+ debug("%s: Timed out writing data to 0x%x\n",
+ __func__, slave_addr);
+ return ret;
+ }
+ ret = twsi_read_status(base);
+ debug("%s: status: 0x%x\n", __func__, ret);
+ }
+
+ debug("%s: Stopping\n", __func__);
+ return twsi_stop(base);
+}
+
+/**
+ * Manually clear the I2C bus and send a stop
+ *
+ * @base register base address
+ */
+static void twsi_unblock(void __iomem *base)
+{
+ int i;
+
+ for (i = 0; i < 9; i++) {
+ writeq(0, base + TWSI_INT);
+ udelay(5);
+ writeq(TWSI_INT_SCL_OVR, base + TWSI_INT);
+ udelay(5);
+ }
+ writeq(TWSI_INT_SCL_OVR | TWSI_INT_SDA_OVR, base + TWSI_INT);
+ udelay(5);
+ writeq(TWSI_INT_SDA_OVR, base + TWSI_INT);
+ udelay(5);
+ writeq(0, base + TWSI_INT);
+ udelay(5);
+}
+
+/**
+ * Performs a read transaction on the i2c bus
+ *
+ * @base Base address of twsi registers
+ * @slave_addr i2c bus address to read from
+ * @buffer buffer to read into
+ * @length number of bytes to read
+ * @return 0 for success, otherwise error
+ */
+static int twsi_read_data(void __iomem *base, u8 slave_addr,
+ u8 *buffer, unsigned int length)
+{
+ unsigned int curr = 0;
+ u64 val;
+ int ret;
+
+ debug("%s(%p, 0x%x, %p, %u)\n", __func__, base, slave_addr,
+ buffer, length);
+ ret = twsi_start(base);
+ if (ret) {
+ debug("%s: start failed\n", __func__);
+ return ret;
+ }
+
+ ret = twsi_wait(base);
+ if (ret) {
+ debug("%s: wait failed\n", __func__);
+ return ret;
+ }
+
+ val = (u32)(slave_addr << 1) | TWSI_OP_READ |
+ FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_DATA) |
+ FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
+ twsi_write_sw(base, val);
+ twsi_write_ctl(base, TWSI_CTL_ENAB);
+
+ ret = twsi_wait(base);
+ if (ret) {
+ debug("%s: waiting for sending addr failed\n", __func__);
+ return ret;
+ }
+
+ ret = twsi_read_status(base);
+ debug("%s: status: 0x%x\n", __func__, ret);
+ if (ret != TWSI_STAT_RXADDR_ACK) {
+ debug("%s: status: 0x%x\n", __func__, ret);
+ twsi_stop(base);
+ return twsi_i2c_lost_arb(ret, 0);
+ }
+
+ while (curr < length) {
+ twsi_write_ctl(base, TWSI_CTL_ENAB |
+ ((curr < length - 1) ? TWSI_CTL_AAK : 0));
+
+ ret = twsi_wait(base);
+ if (ret) {
+ debug("%s: waiting for data failed\n", __func__);
+ return ret;
+ }
+
+ val = twsi_read_sw(base, val);
+ buffer[curr++] = (u8)val;
+ }
+
+ twsi_stop(base);
+
+ return 0;
+}
+
+/**
+ * Calculate the divisor values
+ *
+ * @speed Speed to set
+ * @m_div Pointer to M divisor
+ * @n_div Pointer to N divisor
+ * @return 0 for success, otherwise error
+ */
+static void twsi_calc_div(struct udevice *bus, ulong sclk, unsigned int speed,
+ int *m_div, int *n_div)
+{
+ struct octeon_twsi *twsi = dev_get_priv(bus);
+ int thp = twsi->data->thp;
+ int tclk, fsamp;
+ int ndiv, mdiv;
+
+ if (twsi->data->clk_method == CLK_METHOD_OCTEON) {
+ tclk = sclk / (2 * (thp + 1));
+ } else {
+ /* Refclk src in mode register defaults to 100MHz clock */
+ sclk = 100000000; /* 100 Mhz */
+ tclk = sclk / (thp + 2);
+ }
+ debug("%s( io_clock %lu tclk %u)\n", __func__, sclk, tclk);
+
+ /*
+ * Compute the clocks M divider:
+ *
+ * TWSI freq = (core freq) / (10 x (M+1) x 2 * (thp+1) x 2^N)
+ * M = ((core freq) / (10 x (TWSI freq) x 2 * (thp+1) x 2^N)) - 1
+ *
+ * For OcteonTX2 -
+ * TWSI freq = (core freq) / (10 x (M+1) x (thp+2) x 2^N)
+ * M = ((core freq) / (10 x (TWSI freq) x (thp+2) x 2^N)) - 1
+ */
+ for (ndiv = 0; ndiv < 8; ndiv++) {
+ fsamp = tclk / (1 << ndiv);
+ mdiv = fsamp / speed / 10;
+ mdiv -= 1;
+ if (mdiv < 16)
+ break;
+ }
+
+ *m_div = mdiv;
+ *n_div = ndiv;
+}
+
+/**
+ * Init I2C controller
+ *
+ * @base Base address of twsi registers
+ * @slave_addr I2C slave address to configure this controller to
+ * @return 0 for success, otherwise error
+ */
+static int twsi_init(void __iomem *base, int slaveaddr)
+{
+ u64 val;
+
+ debug("%s (%p, 0x%x)\n", __func__, base, slaveaddr);
+
+ val = slaveaddr << 1 |
+ FIELD_PREP(TWSI_SW_EOP_IA_MASK, 0) |
+ FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA) |
+ TWSI_SW_V;
+ twsi_write_sw(base, val);
+
+ /* Set slave address */
+ val = slaveaddr |
+ FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_EOP_SLAVE_ADDR) |
+ FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA) |
+ TWSI_SW_V;
+ twsi_write_sw(base, val);
+
+ return 0;
+}
+
+/**
+ * Transfers data over the i2c bus
+ *
+ * @bus i2c bus to transfer data over
+ * @msg Array of i2c messages
+ * @nmsgs Number of messages to send/receive
+ * @return 0 for success, otherwise error
+ */
+static int octeon_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
+ int nmsgs)
+{
+ struct octeon_twsi *twsi = dev_get_priv(bus);
+ int ret;
+ int i;
+
+ debug("%s: %d messages\n", __func__, nmsgs);
+ for (i = 0; i < nmsgs; i++, msg++) {
+ debug("%s: chip=0x%x, len=0x%x\n", __func__, msg->addr,
+ msg->len);
+
+ if (msg->flags & I2C_M_RD) {
+ debug("%s: Reading data\n", __func__);
+ ret = twsi_read_data(twsi->base, msg->addr,
+ msg->buf, msg->len);
+ } else {
+ debug("%s: Writing data\n", __func__);
+ ret = twsi_write_data(twsi->base, msg->addr,
+ msg->buf, msg->len);
+ }
+ if (ret) {
+ debug("%s: error sending\n", __func__);
+ return -EREMOTEIO;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * Set I2C bus speed
+ *
+ * @bus i2c bus to transfer data over
+ * @speed Speed in Hz to set
+ * @return 0 for success, otherwise error
+ */
+static int octeon_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
+{
+ struct octeon_twsi *twsi = dev_get_priv(bus);
+ int m_div, n_div;
+ ulong clk_rate;
+ u64 val;
+
+ debug("%s(%p, %u)\n", __func__, bus, speed);
+
+ clk_rate = clk_get_rate(&twsi->clk);
+ if (IS_ERR_VALUE(clk_rate))
+ return -EINVAL;
+
+ twsi_calc_div(bus, clk_rate, speed, &m_div, &n_div);
+ if (m_div >= 16)
+ return -1;
+
+ val = (u32)(((m_div & 0xf) << 3) | ((n_div & 0x7) << 0)) |
+ FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_CLKCTL) |
+ FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA) |
+ TWSI_SW_V;
+ /* Only init non-slave ports */
+ writeq(val, twsi->base + TWSI_SW_TWSI);
+
+ debug("%s: Wrote 0x%llx to sw_twsi\n", __func__, val);
+ return 0;
+}
+
+/**
+ * Driver probe function
+ *
+ * @dev I2C device to probe
+ * @return 0 for success, otherwise error
+ */
+static int octeon_i2c_probe(struct udevice *dev)
+{
+ struct octeon_twsi *twsi = dev_get_priv(dev);
+ u32 i2c_slave_addr;
+ int ret;
+
+ twsi->data = (const struct octeon_i2c_data *)dev_get_driver_data(dev);
+
+ if (twsi->data->probe == PROBE_PCI) {
+ pci_dev_t bdf = dm_pci_get_bdf(dev);
+
+ debug("TWSI PCI device: %x\n", bdf);
+ dev->req_seq = PCI_FUNC(bdf);
+
+ twsi->base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0,
+ PCI_REGION_MEM);
+ } else {
+ twsi->base = dev_remap_addr(dev);
+ }
+ twsi->base += twsi->data->reg_offs;
+
+ i2c_slave_addr = dev_read_u32_default(dev, "i2c-sda-hold-time-ns",
+ CONFIG_SYS_I2C_OCTEON_SLAVE_ADDR);
+
+ ret = clk_get_by_index(dev, 0, &twsi->clk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_enable(&twsi->clk);
+ if (ret)
+ return ret;
+
+ debug("TWSI bus %d at %p\n", dev->seq, twsi->base);
+
+ /* Start with standard speed, real speed set via DT or cmd */
+ return twsi_init(twsi->base, i2c_slave_addr);
+}
+
+static const struct dm_i2c_ops octeon_i2c_ops = {
+ .xfer = octeon_i2c_xfer,
+ .set_bus_speed = octeon_i2c_set_bus_speed,
+};
+
+static const struct octeon_i2c_data i2c_octeon_data = {
+ .probe = PROBE_DT,
+ .reg_offs = 0x0000,
+ .thp = 3,
+ .clk_method = CLK_METHOD_OCTEON,
+};
+
+static const struct octeon_i2c_data i2c_octeontx_data = {
+ .probe = PROBE_PCI,
+ .reg_offs = 0x8000,
+ .thp = 3,
+ .clk_method = CLK_METHOD_OCTEON,
+};
+
+static const struct octeon_i2c_data i2c_octeontx2_data = {
+ .probe = PROBE_PCI,
+ .reg_offs = 0x8000,
+ .thp = 24,
+ .clk_method = CLK_METHOD_OCTEONTX2,
+};
+
+static const struct udevice_id octeon_i2c_ids[] = {
+ { .compatible = "cavium,octeon-7890-twsi",
+ .data = (ulong)&i2c_octeon_data },
+ { .compatible = "cavium,thunder-8890-twsi",
+ .data = (ulong)&i2c_octeontx_data },
+ { .compatible = "cavium,thunder2-99xx-twsi",
+ .data = (ulong)&i2c_octeontx2_data },
+ { }
+};
+
+U_BOOT_DRIVER(octeon_pci_twsi) = {
+ .name = "i2c_octeon",
+ .id = UCLASS_I2C,
+ .of_match = octeon_i2c_ids,
+ .probe = octeon_i2c_probe,
+ .priv_auto_alloc_size = sizeof(struct octeon_twsi),
+ .ops = &octeon_i2c_ops,
+};
+
+static struct pci_device_id octeon_twsi_supported[] = {
+ { PCI_VDEVICE(CAVIUM, PCI_DEVICE_ID_CAVIUM_TWSI),
+ .driver_data = (ulong)&i2c_octeontx2_data },
+ { },
+};
+
+U_BOOT_PCI_DEVICE(octeon_pci_twsi, octeon_twsi_supported);
--
2.26.2
