April 2020 - U-Boot

[PATCH] arm: mach-k3: Use JTAD_ID register for device identification
by Lokesh Vutla 17 Apr '20

17 Apr '20

JTAG ID register is defined by IEEE 1149.1 for device identification. Use this JTAG ID register for identifying AM65x[0] and J721E[1] devices instead of using SoC specific registers. [0] http://www.ti.com/lit/ug/spruid7e/spruid7e.pdf [1] http://www.ti.com/lit/ug/spruil1a/spruil1a.pdf Reported-by: Grygorii Strashko <grygorii.strashko(a)ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla(a)ti.com> --- arch/arm/mach-k3/common.c | 4 ++-- arch/arm/mach-k3/common.h | 4 ++-- arch/arm/mach-k3/include/mach/hardware.h | 14 ++------------ 3 files changed, 6 insertions(+), 16 deletions(-) diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c index efd84ec7eb..613bf09073 100644 --- a/arch/arm/mach-k3/common.c +++ b/arch/arm/mach-k3/common.c @@ -307,8 +307,8 @@ int print_cpuinfo(void) u32 soc, rev; char *name; - soc = (readl(CTRLMMR_WKUP_JTAG_DEVICE_ID) & - DEVICE_ID_FAMILY_MASK) >> DEVICE_ID_FAMILY_SHIFT; + soc = (readl(CTRLMMR_WKUP_JTAG_ID) & + JTAG_ID_PARTNO_MASK) >> JTAG_ID_PARTNO_SHIFT; rev = (readl(CTRLMMR_WKUP_JTAG_ID) & JTAG_ID_VARIANT_MASK) >> JTAG_ID_VARIANT_SHIFT; diff --git a/arch/arm/mach-k3/common.h b/arch/arm/mach-k3/common.h index b1cbe116ef..ebbd2112d5 100644 --- a/arch/arm/mach-k3/common.h +++ b/arch/arm/mach-k3/common.h @@ -8,8 +8,8 @@ #include <asm/armv7_mpu.h> -#define AM654 2 -#define J721E 4 +#define AM654 0xbb5a +#define J721E 0xbb64 #define REV_PG1_0 0 #define REV_PG2_0 1 diff --git a/arch/arm/mach-k3/include/mach/hardware.h b/arch/arm/mach-k3/include/mach/hardware.h index d670d5a56e..0ad761418b 100644 --- a/arch/arm/mach-k3/include/mach/hardware.h +++ b/arch/arm/mach-k3/include/mach/hardware.h @@ -15,20 +15,10 @@ #endif /* Assuming these addresses and definitions stay common across K3 devices */ -#define CTRLMMR_WKUP_JTAG_DEVICE_ID 0x43000018 -#define DEVICE_ID_FAMILY_SHIFT 26 -#define DEVICE_ID_FAMILY_MASK (0x3f << 26) -#define DEVICE_ID_BASE_SHIFT 11 -#define DEVICE_ID_BASE_MASK (0x1fff << 11) -#define DEVICE_ID_SPEED_SHIFT 6 -#define DEVICE_ID_SPEED_MASK (0x1f << 6) -#define DEVICE_ID_TEMP_SHIFT 3 -#define DEVICE_ID_TEMP_MASK (0x7 << 3) - -#define CTRLMMR_WKUP_JTAG_ID 0x43000014 +#define CTRLMMR_WKUP_JTAG_ID 0x43000014 #define JTAG_ID_VARIANT_SHIFT 28 #define JTAG_ID_VARIANT_MASK (0xf << 28) #define JTAG_ID_PARTNO_SHIFT 12 -#define JTAG_ID_PARTNO_MASK (0x7ff << 1) +#define JTAG_ID_PARTNO_MASK (0xffff << 12) #endif /* _ASM_ARCH_HARDWARE_H_ */ -- 2.23.0

1 0

[PATCH] condfigs: ls1046aqds: support distro boot
by Biwen Li 17 Apr '20

17 Apr '20

Add support of distro boot for ls1046aqds Signed-off-by: Biwen Li <biwen.li(a)nxp.com> --- include/configs/ls1046a_common.h | 8 +++++++- include/configs/ls1046aqds.h | 20 +++++++++----------- 2 files changed, 16 insertions(+), 12 deletions(-) diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 07570187f5..111bc9a7b9 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -227,7 +227,7 @@ "fdt_high=0xffffffffffffffff\0" \ "initrd_high=0xffffffffffffffff\0" \ "fdt_addr=0x64f00000\0" \ - "kernel_addr=0x65000000\0" \ + "kernel_addr=0x61000000\0" \ "scriptaddr=0x80000000\0" \ "scripthdraddr=0x80080000\0" \ "fdtheader_addr_r=0x80100000\0" \ @@ -274,6 +274,12 @@ "&& sf read $kernelheader_addr_r $kernelheader_start " \ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ "bootm $load_addr#$board\0" \ + "nor_bootcmd=echo Trying load from nor..;" \ + "cp.b $kernel_addr $load_addr " \ + "$kernel_size; env exists secureboot " \ + "&& cp.b $kernelheader_addr $kernelheader_addr_r " \ + "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ + "bootm $load_addr#$board\0" \ "sd_bootcmd=echo Trying load from SD ..;" \ "mmcinfo; mmc read $load_addr " \ "$kernel_addr_sd $kernel_size_sd && " \ diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index eea738e602..d5d96c4ed5 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -457,19 +457,17 @@ unsigned long get_board_ddr_clk(void); #undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT -#define QSPI_NOR_BOOTCOMMAND "sf probe && sf read $kernel_load " \ - "e0000 f00000 && bootm $kernel_load" -#define IFC_NOR_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \ - "$kernel_size && bootm $kernel_load" -#define SD_BOOTCOMMAND "mmc info; mmc read $kernel_load" \ - "$kernel_addr_sd $kernel_size_sd && bootm $kernel_load" +#define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; " \ + "env exists secureboot && esbc_halt;;" +#define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \ + "env exists secureboot && esbc_halt;;" #else -#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_BOOTCOMMAND "sf probe && sf read $kernel_load " \ - "e0000 f00000 && bootm $kernel_load" +#if defined(CONFIG_SD_BOOT) +#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \ + "env exists secureboot && esbc_halt;;" #else -#define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \ - "$kernel_size && bootm $kernel_load" +#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; " \ + "env exists secureboot && esbc_halt;;" #endif #endif -- 2.17.1

2 2

[v2, PATCH] include/configs: ls1012aqds: add default environment variable
by Biwen Li 17 Apr '20

17 Apr '20

This adds default environment variable for ls1012aqds Signed-off-by: Biwen Li <biwen.li(a)nxp.com> --- Change in v2: - delete environment variable installer include/configs/ls1012aqds.h | 64 ++++++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index fb0d1ba6b2..063d1a8ac7 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -110,5 +110,69 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END 0x9fffffff +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=no\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "fdt_addr=0x00f00000\0" \ + "kernel_addr=0x01000000\0" \ + "kernelheader_addr=0x600000\0" \ + "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ + "fdtheader_addr_r=0x80100000\0" \ + "kernelheader_addr_r=0x80200000\0" \ + "kernel_addr_r=0x96000000\0" \ + "fdt_addr_r=0x90000000\0" \ + "load_addr=0xa0000000\0" \ + "kernel_size=0x2800000\0" \ + "kernelheader_size=0x40000\0" \ + "console=ttyS0,115200\0" \ + BOOTENV \ + "boot_scripts=ls1012aqds_boot.scr\0" \ + "boot_script_hdr=hdr_ls1012aqds_bs.out\0" \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "env exists devplist || setenv devplist 1; " \ + "for distro_bootpart in ${devplist}; do " \ + "if fstype ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + "scan_dev_for_boot=" \ + "echo Scanning ${devtype} " \ + "${devnum}:${distro_bootpart}...; " \ + "for prefix in ${boot_prefixes}; do " \ + "run scan_dev_for_scripts; " \ + "done;" \ + "\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr}; " \ + "env exists secureboot " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ + "qspi_bootcmd=pfe stop; echo Trying load from qspi..;" \ + "sf probe 0:0 && sf read $load_addr " \ + "$kernel_addr $kernel_size; env exists secureboot " \ + "&& sf read $kernelheader_addr_r $kernelheader_addr " \ + "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ + "bootm $load_addr#$board\0" + +#undef CONFIG_BOOTCOMMAND +#ifdef CONFIG_TFABOOT +#undef QSPI_NOR_BOOTCOMMAND +#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\ + "env exists secureboot && esbc_halt;" +#else +#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\ + "env exists secureboot && esbc_halt;" +#endif + #include <asm/fsl_secure_boot.h> #endif /* __LS1012AQDS_H__ */ -- 2.17.1

2 2

[PATCH] arm: mvebu: clearfog: adjust SCSI boot duplication
by Joel Johnson 17 Apr '20

17 Apr '20

Fix duplication resulting from merging of multiple related series. Commits cecf38a75, bd02fd29f, and 201a500de added or adjusted SCSI boot support for ClearFog, but in slightly different locations which didn't result in a merge conflict. Signed-off-by: Joel Johnson <mrjoel(a)lixil.net> --- include/configs/clearfog.h | 7 ------- 1 file changed, 7 deletions(-) diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index 8314956db6..53ff830e81 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -104,12 +104,6 @@ #define BOOT_TARGET_DEVICES_MMC(func) #endif -#ifdef CONFIG_SCSI -#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) -#else -#define BOOT_TARGET_DEVICES_SCSI(func) -#endif - #ifdef CONFIG_USB_STORAGE #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) #else @@ -152,7 +146,6 @@ */ #define BOOT_TARGET_DEVICES(func) \ BOOT_TARGET_DEVICES_MMC(func) \ - BOOT_TARGET_DEVICES_SCSI(func) \ BOOT_TARGET_DEVICES_USB(func) \ BOOT_TARGET_DEVICES_SCSI_BUS0(func) \ BOOT_TARGET_DEVICES_SCSI_BUS1(func) \ -- 2.26.1

2 1

[PATCH] mtd: rawnand: denali: configure SPARE_AREA_SKIP_BYTES only for denali_spl
by Masahiro Yamada 17 Apr '20

17 Apr '20

This CONFIG option is only used in denali_spl.c Move it close to SPL_NAND_DENALI, and make it depend on SPL_NAND_DENALI. Signed-off-by: Masahiro Yamada <yamada.masahiro(a)socionext.com> --- drivers/mtd/nand/raw/Kconfig | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 23201ca720..23215b6921 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -121,15 +121,6 @@ config NAND_DENALI_DT Enable the driver for NAND flash on platforms using a Denali NAND controller as a DT device. -config NAND_DENALI_SPARE_AREA_SKIP_BYTES - int "Number of bytes skipped in OOB area" - depends on NAND_DENALI - range 0 63 - help - This option specifies the number of bytes to skip from the beginning - of OOB area before last ECC sector data starts. This is potentially - used to preserve the bad block marker in the OOB area. - config NAND_LPC32XX_SLC bool "Support LPC32XX_SLC controller" help @@ -404,6 +395,15 @@ config SPL_NAND_DENALI This is a small implementation of the Denali NAND controller for use on SPL. +config NAND_DENALI_SPARE_AREA_SKIP_BYTES + int "Number of bytes skipped in OOB area" + depends on SPL_NAND_DENALI + range 0 63 + help + This option specifies the number of bytes to skip from the beginning + of OOB area before last ECC sector data starts. This is potentially + used to preserve the bad block marker in the OOB area. + config SPL_NAND_SIMPLE bool "Use simple SPL NAND driver" depends on !SPL_NAND_AM33XX_BCH -- 2.25.1

1 0

[PATCH 1/2] arm: mvebu: clearfog: add SCSI to distro bootcmd
by Joel Johnson 17 Apr '20

17 Apr '20

Include attempting to boot from SCSI (SATA) devices within generated board distro bootcmd environment. The reasoning for boot ordering is that MMC and USB are external and removable, while when a case is in use, replacing M.2 or mSATA drives requires disassembly. Therefore, to boot SCSI, [bootable] external media must be removed. If SCSI were placed before MMC or USB, then removing a bootable SCSI drive to enable MMC or USB booting would be more difficult. Signed-off-by: Joel Johnson <mrjoel(a)lixil.net> --- include/configs/clearfog.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index 633187d86f..a452f4b009 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -110,9 +110,16 @@ #define BOOT_TARGET_DEVICES_USB(func) #endif +#ifdef CONFIG_SCSI +#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) +#else +#define BOOT_TARGET_DEVICES_SCSI(func) +#endif + #define BOOT_TARGET_DEVICES(func) \ BOOT_TARGET_DEVICES_MMC(func) \ BOOT_TARGET_DEVICES_USB(func) \ + BOOT_TARGET_DEVICES_SCSI(func) \ func(PXE, pxe, na) \ func(DHCP, dhcp, na) -- 2.20.1

2 9

Re： [PATCH] rockchip: rk3328: add rock-pi-e-rk3328_defconfig
by b.l.huang 17 Apr '20

17 Apr '20

>Does this board dts also upstream to kernel? If yes, please split the >dts as a separate patch > >and add the commit info in the message. > Temporarily not for upstream to kernel. > >On 2020/4/13 PM 4:23, banglang.huang wrote: >> The ROCK-PI-E is a credit card size SBC based on Rockchip RK3328 >> Quad-Core ARM Cortex A53. >> >> Net - Dual ethernet port, 1 X Gbe, 1 X 100M >> USB - USB 3.0 >> DC - USB-Type C, 5V 2A >> Storage - TF card, eMMC >> >> Just build u-boot-dtb.bin for Rockpi E board and follow the blow >> steps to replace the relevant partition. >> >> ./rkbin/tools/loaderimage --pack --uboot u-boot-dtb.bin \ >> uboot.img 0x200000 --size 1024 1 >> dd if=uboot.img of=/dev/sdcard seek=16384 conv=notrunc > > >RK3328 has enable the TPL support for dram init, could you enable >TPL/SPL for this board? I am new to rk3328, could you tell me or give me a hint for how to enable TPL/SPL for rock-pi-e board ?

2 1

[PATCH 01/27] rtc: ds1337: Add driver model support
by Biwen Li 17 Apr '20

17 Apr '20

From: Biwen Li <biwen.li(a)nxp.com> Add support of driver model of ds1337 Signed-off-by: Biwen Li <biwen.li(a)nxp.com> --- drivers/rtc/ds1337.c | 127 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 127 insertions(+) diff --git a/drivers/rtc/ds1337.c b/drivers/rtc/ds1337.c index 9b31048e97..e12d368675 100644 --- a/drivers/rtc/ds1337.c +++ b/drivers/rtc/ds1337.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* * (C) Copyright 2001-2008 + * Copyright 2020 NXP * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. * Keith Outwater, keith_outwater(a)mvis.com` */ @@ -12,6 +13,7 @@ #include <common.h> #include <command.h> +#include <dm.h> #include <rtc.h> #include <i2c.h> @@ -60,6 +62,7 @@ #define RTC_STAT_BIT_OSF 0x80 /* Oscillator stop flag */ +#if !CONFIG_IS_ENABLED(DM_RTC) static uchar rtc_read (uchar reg); static void rtc_write (uchar reg, uchar val); @@ -188,3 +191,127 @@ static void rtc_write (uchar reg, uchar val) { i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val); } +#else +static uchar rtc_read (struct udevice *dev, uchar reg) +{ + return (dm_i2c_reg_read (dev, reg)); +} + +static void rtc_write (struct udevice *dev, uchar reg, uchar val) +{ + dm_i2c_reg_write (dev, reg, val); +} + +static int ds1337_rtc_get (struct udevice *dev, struct rtc_time *tmp) +{ + int rel = 0; + uchar sec, min, hour, mday, wday, mon_cent, year, control, status; + + control = rtc_read (dev, RTC_CTL_REG_ADDR); + status = rtc_read (dev, RTC_STAT_REG_ADDR); + sec = rtc_read (dev, RTC_SEC_REG_ADDR); + min = rtc_read (dev, RTC_MIN_REG_ADDR); + hour = rtc_read (dev, RTC_HR_REG_ADDR); + wday = rtc_read (dev, RTC_DAY_REG_ADDR); + mday = rtc_read (dev, RTC_DATE_REG_ADDR); + mon_cent = rtc_read (dev, RTC_MON_REG_ADDR); + year = rtc_read (dev, RTC_YR_REG_ADDR); + + /* No century bit, assume year 2000 */ +#ifdef CONFIG_RTC_DS1388 + mon_cent |= 0x80; +#endif + + debug("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x " + "hr: %02x min: %02x sec: %02x control: %02x status: %02x\n", + year, mon_cent, mday, wday, hour, min, sec, control, status); + + if (status & RTC_STAT_BIT_OSF) { + printf ("### Warning: RTC oscillator has stopped\n"); + /* clear the OSF flag */ + rtc_write (dev, RTC_STAT_REG_ADDR, + rtc_read (dev, RTC_STAT_REG_ADDR) & ~RTC_STAT_BIT_OSF); + rel = -1; + } + + tmp->tm_sec = bcd2bin (sec & 0x7F); + tmp->tm_min = bcd2bin (min & 0x7F); + tmp->tm_hour = bcd2bin (hour & 0x3F); + tmp->tm_mday = bcd2bin (mday & 0x3F); + tmp->tm_mon = bcd2bin (mon_cent & 0x1F); + tmp->tm_year = bcd2bin (year) + ((mon_cent & 0x80) ? 2000 : 1900); + tmp->tm_wday = bcd2bin ((wday - 1) & 0x07); + tmp->tm_yday = 0; + tmp->tm_isdst= 0; + + debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); + + return rel; +} + +static int ds1337_rtc_set (struct udevice *dev, const struct rtc_time *tmp) +{ + uchar century; + + debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); + + rtc_write (dev, RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100)); + + century = (tmp->tm_year >= 2000) ? 0x80 : 0; + rtc_write (dev, RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon) | century); + + rtc_write (dev, RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1)); + rtc_write (dev, RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday)); + rtc_write (dev, RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour)); + rtc_write (dev, RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min)); + rtc_write (dev, RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec)); + + return 0; +} + +#ifdef CONFIG_RTC_DS1337_NOOSC + #define RTC_DS1337_RESET_VAL \ + (RTC_CTL_BIT_INTCN | RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2) +#else + #define RTC_DS1337_RESET_VAL (RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2) +#endif +static int ds1337_rtc_reset (struct udevice *dev) +{ +#ifdef CONFIG_RTC_DS1337 + rtc_write (dev, RTC_CTL_REG_ADDR, RTC_DS1337_RESET_VAL); +#elif defined CONFIG_RTC_DS1388 + rtc_write(dev, RTC_CTL_REG_ADDR, 0x0); /* hw default */ +#endif +#ifdef CONFIG_RTC_DS1339_TCR_VAL + rtc_write (dev, RTC_TC_REG_ADDR, CONFIG_RTC_DS1339_TCR_VAL); +#endif +#ifdef CONFIG_RTC_DS1388_TCR_VAL + rtc_write(dev, RTC_TC_REG_ADDR, CONFIG_RTC_DS1388_TCR_VAL); +#endif + return 0; +} + +static const struct rtc_ops ds1337_rtc_ops = { + .get = ds1337_rtc_get, + .set = ds1337_rtc_set, + .reset = ds1337_rtc_reset, +}; + +static const struct udevice_id ds1337_rtc_ids[] = { + { .compatible = "ds1337" }, + { .compatible = "ds1338" }, + { .compatible = "ds1338" }, + { } +}; + +U_BOOT_DRIVER(rtc_ds1337) = { + .name = "rtc-ds1337", + .id = UCLASS_RTC, + .of_match = ds1337_rtc_ids, + .ops = &ds1337_rtc_ops, +}; +#endif -- 2.17.1

4 44

[U-Boot] Please pull ARC changes for v2020.07-rc1
by Alexey Brodkin 17 Apr '20

17 Apr '20

Hi Tom, The following changes since commit dba0a6ae1907bbff3ebda06e4874d006f10db1bb: Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86 (2020-04-16 08:56:37 -0400) are available in the Git repository at: git@gitlab.denx.de:u-boot/custodians/u-boot-arc.git tags/arc-fixes-for-2020.07-rc1 for you to fetch changes up to 7b50db8242b62c85a19da9521b703faa858f4a63: ARC: HSDK: CGU: fix tunnel clock calculation (2020-04-16 23:37:10 +0300) ---------------------------------------------------------------- This is pretty minor set of changes mostly touching HSDK board: * Enable on-chip reset controller on HSDK * Add possibility to turn-on & off L2$ on more recent ARC HS processors. * AXI tunnel clock calculation on HSDK ---------------------------------------------------------------- Eugeniy Paltsev (4): ARC: CACHE: add support for SL$ disable ARC: CACHE: mark IOC helper functions as inlined_cachefunc ARC: HSDK: Enable on-chip reset controller ARC: HSDK: CGU: fix tunnel clock calculation arch/arc/dts/hsdk.dts | 7 +++++++ arch/arc/include/asm/cache.h | 7 +++++++ arch/arc/lib/cache.c | 118 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------- configs/hsdk_defconfig | 1 + drivers/clk/clk-hsdk-cgu.c | 3 ++- 5 files changed, 126 insertions(+), 10 deletions(-) -Alexey

2 1

Pull request for UEFI sub-system for efi-2020-07-rc1
by Heinrich Schuchardt 17 Apr '20

17 Apr '20

The following changes since commit 9cb3ce2558ba1fc058dfb26a07fc02603773a211: Merge branch 'master' of git://git.denx.de/u-boot-marvell (2020-04-15 08:30:16 -0400) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-efi.git tags/efi-2020-07-rc1 for you to fetch changes up to b2ace8753d0048487ab6e8955ae9067a6af91559: efi_loader: add some description about UEFI secure boot (2020-04-16 08:12:47 +0200) ---------------------------------------------------------------- Pull request for UEFI sub-system for efi-2020-07-rc1 This pull request * provides an implementation of UEFI secure booting * fixes a problem with the rsa_mod_exp driver which stops some boards from booting when CONFIG_RSA is enabled which is needed for UEFI secure booting * enables the EFI_RNG_PROTOCOL if DM_RNG is enabled * fixes some function comments No problems where reported by Gitlab and Travis: https://gitlab.denx.de/u-boot/custodians/u-boot-efi/pipelines/2782 https://travis-ci.org/github/xypron2/u-boot/builds/675602621 ---------------------------------------------------------------- AKASHI Takahiro (17): efi_loader: add CONFIG_EFI_SECURE_BOOT config option efi_loader: add signature verification functions efi_loader: add signature database parser efi_loader: variable: support variable authentication efi_loader: variable: add secure boot state transition efi_loader: variable: add VendorKeys variable efi_loader: image_loader: support image authentication efi_loader: set up secure boot cmd: env: use appropriate guid for authenticated UEFI variable cmd: env: add "-at" option to "env set -e" command cmd: efidebug: add "test bootmgr" sub-command efi_loader, pytest: set up secure boot environment efi_loader, pytest: add UEFI secure boot tests (authenticated variables) efi_loader, pytest: add UEFI secure boot tests (image) sandbox: add extra configurations for UEFI and related tests travis: add packages for UEFI secure boot test efi_loader: add some description about UEFI secure boot Heinrich Schuchardt (4): efi_loader: function descriptions efi_unicode_collation.c efi_loader: add missing doc comments in efi_disk.c efi_loader: function descriptions efi_watchdog.c drivers: crypto: rsa_mod_exp: avoid DM_FLAG_PRE_RELOC Peter Robinson (1): efi_loader: enable RNG if DM_RNG is enabled .travis.yml | 11 +- cmd/efidebug.c | 78 +- cmd/nvedit.c | 5 +- cmd/nvedit_efi.c | 23 +- configs/sandbox64_defconfig | 3 + configs/sandbox_defconfig | 3 + doc/api/efi.rst | 12 + doc/uefi/uefi.rst | 77 ++ drivers/crypto/fsl/fsl_rsa.c | 1 - drivers/crypto/rsa_mod_exp/mod_exp_sw.c | 1 - include/efi_api.h | 87 +++ include/efi_loader.h | 91 ++- lib/efi_loader/Kconfig | 19 + lib/efi_loader/Makefile | 1 + lib/efi_loader/efi_boottime.c | 10 +- lib/efi_loader/efi_disk.c | 52 +- lib/efi_loader/efi_image_loader.c | 462 +++++++++++- lib/efi_loader/efi_setup.c | 38 + lib/efi_loader/efi_signature.c | 804 ++++++++++++++++++++ lib/efi_loader/efi_unicode_collation.c | 6 +- lib/efi_loader/efi_variable.c | 952 +++++++++++++++++++++--- lib/efi_loader/efi_watchdog.c | 18 +- test/py/README.md | 8 + test/py/tests/test_efi_secboot/conftest.py | 151 ++++ test/py/tests/test_efi_secboot/defs.py | 21 + test/py/tests/test_efi_secboot/test_authvar.py | 282 +++++++ test/py/tests/test_efi_secboot/test_signed.py | 117 +++ test/py/tests/test_efi_secboot/test_unsigned.py | 121 +++ 28 files changed, 3307 insertions(+), 147 deletions(-) create mode 100644 lib/efi_loader/efi_signature.c create mode 100644 test/py/tests/test_efi_secboot/conftest.py create mode 100644 test/py/tests/test_efi_secboot/defs.py create mode 100644 test/py/tests/test_efi_secboot/test_authvar.py create mode 100644 test/py/tests/test_efi_secboot/test_signed.py create mode 100644 test/py/tests/test_efi_secboot/test_unsigned.py

2 1