January 2020 - U-Boot

[PATCH] rockchip: rk3308: add alias for emmc/sdmmc
by Kever Yang 09 Jan '20

09 Jan '20

Add alias for mmc/sdmmc so that we can have a fix mmc number for emmc. Signed-off-by: Kever Yang <kever.yang(a)rock-chips.com> --- arch/arm/dts/rk3308-u-boot.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/dts/rk3308-u-boot.dtsi b/arch/arm/dts/rk3308-u-boot.dtsi index f5a595337e..4bfad31fba 100644 --- a/arch/arm/dts/rk3308-u-boot.dtsi +++ b/arch/arm/dts/rk3308-u-boot.dtsi @@ -3,6 +3,13 @@ *(C) Copyright 2019 Rockchip Electronics Co., Ltd */ +/ { + aliases { + mmc0 = &emmc; + mmc1 = &sdmmc; + }; +}; + &cru { u-boot,dm-pre-reloc; }; -- 2.17.1

2 3

[PATCH v2] armv8: fsl-layerscape: LS1084A: Fix DPMAC1 support
by Pramod Kumar 09 Jan '20

09 Jan '20

LS1088A has four personalities, LS1088A, LS1084A, LS1048A and LS1044A. LS1088A and LS1084A support 2x 10G DPMAC however DPMAC1 is currently disabled for LS1084A, Enable to support both 2x 10G DPMAC. Signed-off-by: Pramod Kumar <pramod.kumar_1(a)nxp.com> --- Changes in v2: - incorporate review comments arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c index 67d97f8..280afbb 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c @@ -57,7 +57,7 @@ bool soc_has_mac1(void) unsigned int svr = gur_in32(&gur->svr); unsigned int version = SVR_SOC_VER(svr); - return version == SVR_LS1088A; + return (version == SVR_LS1088A || version == SVR_LS1084A); } int serdes_get_number(int serdes, int cfg) -- 2.7.4

1 0

[PATCH 10/16] mips: unconditionally enable u_boot_list section in u-boot-spl.lds
by Weijie Gao 09 Jan '20

09 Jan '20

u_boot_list is not only used by DM, but also by some SPL image load methods such as spl_nor.c. This patch removes CONFIG_SPL_DM surrounding the u_boot_list section to make sure SPL image load methods can be correctly built into u-boot without DM enabled. Signed-off-by: Weijie Gao <weijie.gao(a)mediatek.com> --- arch/mips/cpu/u-boot-spl.lds | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/mips/cpu/u-boot-spl.lds b/arch/mips/cpu/u-boot-spl.lds index d08d6222c4..cd143ab168 100644 --- a/arch/mips/cpu/u-boot-spl.lds +++ b/arch/mips/cpu/u-boot-spl.lds @@ -27,12 +27,10 @@ SECTIONS *(SORT_BY_ALIGNMENT(.sdata*)) } > .spl_mem -#ifdef CONFIG_SPL_DM . = ALIGN(4); .u_boot_list : { KEEP(*(SORT(.u_boot_list*))); } > .spl_mem -#endif . = ALIGN(4); __image_copy_end = .; -- 2.17.1

2 2

[PATCH 04/16] mips: add an option to support customized get_tbclk()
by Weijie Gao 09 Jan '20

09 Jan '20

Some systems boot up at a very low CPU frequency and set up a higher CPU frequency in lowlevel initialization. Currently get_tbclk() uses a fixed value (CONFIG_SYS_MIPS_TIMER_FREQ) for MIPS architercture, and CONFIG_SYS_MIPS_TIMER_FREQ is usually related to the higher CPU frequency. If udelay() is used before setting up CPU frequency, it will be very inaccurate. This patch adds an option to allow a mach to define its own get_tbclk(). Signed-off-by: Weijie Gao <weijie.gao(a)mediatek.com> --- arch/mips/Kconfig | 8 ++++++++ arch/mips/cpu/time.c | 2 ++ 2 files changed, 10 insertions(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 4688717593..52afbf79c5 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -502,6 +502,14 @@ config MIPS_BOOT_CONFIG_WORD1 help Value which is inserted as boot config word 1. +config MIPS_OVERRIDE_GET_TBCLK + bool + default n + help + Select this if you want to override the default get_tbclk() for your + system. This usually means the timer frequency of your system may + change in different boot stage. + endif endmenu diff --git a/arch/mips/cpu/time.c b/arch/mips/cpu/time.c index af324f77ce..61d1cd9ec0 100644 --- a/arch/mips/cpu/time.c +++ b/arch/mips/cpu/time.c @@ -12,7 +12,9 @@ unsigned long notrace timer_read_counter(void) return read_c0_count(); } +#ifndef CONFIG_MIPS_OVERRIDE_GET_TBCLK ulong notrace get_tbclk(void) { return CONFIG_SYS_MIPS_TIMER_FREQ; } +#endif -- 2.17.1

2 2

[PATCH 02/16] mips: add support to restore exception vector base before booting linux
by Weijie Gao 09 Jan '20

09 Jan '20

In U-Boot the exception vector base will be moved to top of memory, to be used to display register dump when exception occurs. But some old linux kernel does not honor the base set in CP0_EBASE. A modified exception vector base will cause kernel crash. This patch adds an option to enable reset exception vector base to 0x80000000 before booting linux kernel. Signed-off-by: Weijie Gao <weijie.gao(a)mediatek.com> --- arch/mips/Kconfig | 13 +++++++++++++ arch/mips/lib/bootm.c | 9 +++++++++ 2 files changed, 22 insertions(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index a3ae603044..4688717593 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -287,6 +287,19 @@ config MIPS_RELOCATION_TABLE_SIZE If unsure, leave at the default value. +config RESTORE_EXCEPTION_VECTOR_BASE + bool "Restore exception vector base before booting linux kernel" + default n + help + In U-Boot the exception vector base will be moved to top of memory, + to be used to display register dump when exception occurs. + But some old linux kernel does not honor the base set in CP0_EBASE. + A modified exception vector base will cause kernel crash. + + This option will set exception vector base to 0x80000000. + + If unsure, say N. + endmenu menu "OS boot interface" diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c index 8c0d7672f2..86ea082fd0 100644 --- a/arch/mips/lib/bootm.c +++ b/arch/mips/lib/bootm.c @@ -294,6 +294,15 @@ static void boot_jump_linux(bootm_headers_t *images) bootstage_report(); #endif +#ifdef CONFIG_RESTORE_EXCEPTION_VECTOR_BASE + /* Restore EBASE for compatibility */ + set_c0_status(ST0_BEV); + execution_hazard_barrier(); + write_c0_ebase(KSEG0); + clear_c0_status(ST0_BEV); + execution_hazard_barrier(); +#endif + if (images->ft_len) kernel(-2, (ulong)images->ft_addr, 0, 0); else -- 2.17.1

2 2

[PATCH] Revert "dm: core: Scan "/firmware" node by default"
by Thirupathaiah Annapureddy 09 Jan '20

09 Jan '20

Subnodes under "/firmware" node are scanned twice in dm_scan_fdt_node and dm_extended_scan_fdt. This patch removes the double scanning. This reverts commit 1712ca21924bff678f19fd3141f435408d23bdbf. Signed-off-by: Thirupathaiah Annapureddy <thiruan(a)linux.microsoft.com> --- drivers/core/root.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/core/root.c b/drivers/core/root.c index e85643819e..daf7c61190 100644 --- a/drivers/core/root.c +++ b/drivers/core/root.c @@ -342,14 +342,8 @@ int dm_extended_scan_fdt(const void *blob, bool pre_reloc_only) } ret = dm_scan_fdt_ofnode_path("/clocks", pre_reloc_only); - if (ret) { - debug("scan for /clocks failed: %d\n", ret); - return ret; - } - - ret = dm_scan_fdt_ofnode_path("/firmware", pre_reloc_only); if (ret) - debug("scan for /firmware failed: %d\n", ret); + debug("scan for /clocks failed: %d\n", ret); return ret; } -- 2.24.1

2 2

[GIT PULL] UniPhier SoC updates for v2020.04
by Masahiro Yamada 09 Jan '20

09 Jan '20

Hi Tom, Here is a small change set for v2020.04 Please pull. Thanks. The following changes since commit d8a3f5259a36e76d1de127f65714c40918e8ee4c: Merge tag 'u-boot-imx-20200107' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx (2020-01-07 08:45:43 -0500) are available in the Git repository at: git@gitlab.denx.de:u-boot/custodians/u-boot-uniphier.git tags/uniphier-v2020.04 for you to fetch changes up to 7b1c1f95c81c7f7e85fcfce2bfbe0ebc52984120: uniphier_{v7, v8}_defconfig: enable SPI driver and sspi command (2020-01-09 02:02:48 +0900) ---------------------------------------------------------------- UniPhier SoC updates for v2020.04 - add pinmux nodes for I2C ch5, ch6 - enable SPI driver and command ---------------------------------------------------------------- Masahiro Yamada (2): ARM: dts: uniphier: add pinmux nodes for I2C ch5, ch6 uniphier_{v7, v8}_defconfig: enable SPI driver and sspi command arch/arm/dts/uniphier-pinctrl.dtsi | 10 ++++++++++ configs/uniphier_v7_defconfig | 4 ++++ configs/uniphier_v8_defconfig | 4 ++++ 3 files changed, 18 insertions(+) -- Best Regards Masahiro Yamada

2 1

[GIT PULL] Pull request: u-boot-imx u-boot-imx-20200108
by Stefano Babic 09 Jan '20

09 Jan '20

Hi Tom, there are some fixes that slipped away from 2020.01 + support for new NXP SOC: The following changes since commit b6e7ef4bf71bc0927dea35fdec0a653a82ae57a7: ARM: mxs: spl_boot.c: make early_delay more robust (2020-01-07 10:26:57 +0100) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-imx.git tags/u-boot-imx-20200108 for you to fetch changes up to 028c8c411976c30758ddb5f5ffeef792e4595d8d: imx: imx8mn: enable CONFIG_CMD_ERASEENV (2020-01-08 13:20:09 +0100) ---------------------------------------------------------------- --------------------------------------------------------------------- Add i.MX8MP SoC and EVK board Update README for i.MX8MN EVK and fix mmc env Add pca9450 driver -------------------------------------------------------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885 ---------------------------------------------------------------- Fabio Estevam (2): wandboard: Fix the DM_PMIC conversion wandboard: Remove repeated PMIC string Peng Fan (25): imx: imx8mq: handle ESDHC in mxc_get_clock imx: get cpu id/type of i.MX8MP imx8mp: set BYPASS ID SWAP to avoid AXI bus errors imx: cpu: enlarge bit mask to 0x1FF for cpu type imx: imx8m: add Kconfig entry for i.MX8MP imx: spl: support i.MX8MP spl_boot_device dt-bindings: clock: add i.MX8MP clock header arm: dts: add i.MX8MP pinfunc header imx: imx8mp: add basic clock imx: imx8m: add 1GHz fracpll entry pinctrl: imx8m: support i.MX8MP mxc_ocotp: support i.MX8MP ddr: imx8m: Add DRAM PLL to generate 1000Mhz output arm: dts: freescale: Add i.MX8MP dtsi support imx: imx8mp: add pin header file imx: add i.MX8MP PE property imx: Kconfig: make SPL_IMX_ROMAPI_LOADADDR visible to i.MX8MP imx: imx8m: only support non-dm code in clock_imx8mm.c clk: imx: add imx_clk_mux2_flags clk: imx: add i.MX8MP clk driver imx: imx8m: add imximage-8mp-lpddr4.cfg imx: add i.MX8MP EVK board imx8mn: evk: add README imx: imx8mn_evk: add board_mmc_get_env_dev imx: imx8mn: enable CONFIG_CMD_ERASEENV Ye Li (1): power: Add new PMIC PCA9450 driver arch/arm/dts/Makefile | 3 +- arch/arm/dts/imx8mp-evk-u-boot.dtsi | 121 ++++++ arch/arm/dts/imx8mp-evk.dts | 231 +++++++++++ arch/arm/dts/imx8mp-pinfunc.h | 931 ++++++++++++++++++++++++++++++++++++++++++++ arch/arm/dts/imx8mp.dtsi | 598 ++++++++++++++++++++++++++++ arch/arm/include/asm/arch-imx/cpu.h | 1 + arch/arm/include/asm/arch-imx8m/clock.h | 3 +- arch/arm/include/asm/arch-imx8m/clock_imx8mm.h | 112 +++++- arch/arm/include/asm/arch-imx8m/imx8mp_pins.h | 1080 +++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/include/asm/mach-imx/iomux-v3.h | 2 +- arch/arm/include/asm/mach-imx/sys_proto.h | 1 + arch/arm/mach-imx/Kconfig | 3 +- arch/arm/mach-imx/cpu.c | 6 +- arch/arm/mach-imx/imx8m/Kconfig | 11 + arch/arm/mach-imx/imx8m/Makefile | 2 +- arch/arm/mach-imx/imx8m/clock_imx8mm.c | 340 ++++++++++++++-- arch/arm/mach-imx/imx8m/clock_imx8mq.c | 14 +- arch/arm/mach-imx/imx8m/clock_slice.c | 272 +++++++++++++ arch/arm/mach-imx/imx8m/imximage-8mp-lpddr4.cfg | 17 + arch/arm/mach-imx/imx8m/soc.c | 9 +- arch/arm/mach-imx/spl.c | 3 +- board/freescale/imx8mn_evk/README | 37 ++ board/freescale/imx8mn_evk/imx8mn_evk.c | 5 + board/freescale/imx8mp_evk/Kconfig | 14 + board/freescale/imx8mp_evk/MAINTAINERS | 6 + board/freescale/imx8mp_evk/Makefile | 12 + board/freescale/imx8mp_evk/imx8mp_evk.c | 94 +++++ board/freescale/imx8mp_evk/lpddr4_timing.c | 1847 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ board/freescale/imx8mp_evk/spl.c | 158 ++++++++ board/wandboard/wandboard.c | 4 +- configs/imx8mn_ddr4_evk_defconfig | 11 +- configs/imx8mp_evk_defconfig | 84 ++++ drivers/clk/imx/Kconfig | 16 + drivers/clk/imx/Makefile | 2 + drivers/clk/imx/clk-imx8mp.c | 362 +++++++++++++++++ drivers/clk/imx/clk.h | 10 + drivers/ddr/imx/imx8m/ddrphy_utils.c | 4 + drivers/misc/mxc_ocotp.c | 13 + drivers/pinctrl/nxp/pinctrl-imx8m.c | 1 + drivers/power/pmic/Kconfig | 7 + drivers/power/pmic/Makefile | 2 + drivers/power/pmic/pca9450.c | 93 +++++ drivers/power/pmic/pmic_pca9450.c | 50 +++ include/configs/imx8mp_evk.h | 165 ++++++++ include/dt-bindings/clock/imx8mp-clock.h | 300 ++++++++++++++ include/power/pca9450.h | 60 +++ 46 files changed, 7058 insertions(+), 59 deletions(-) create mode 100644 arch/arm/dts/imx8mp-evk-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mp-evk.dts create mode 100644 arch/arm/dts/imx8mp-pinfunc.h create mode 100644 arch/arm/dts/imx8mp.dtsi create mode 100644 arch/arm/include/asm/arch-imx8m/imx8mp_pins.h create mode 100644 arch/arm/mach-imx/imx8m/imximage-8mp-lpddr4.cfg create mode 100644 board/freescale/imx8mn_evk/README create mode 100644 board/freescale/imx8mp_evk/Kconfig create mode 100644 board/freescale/imx8mp_evk/MAINTAINERS create mode 100644 board/freescale/imx8mp_evk/Makefile create mode 100644 board/freescale/imx8mp_evk/imx8mp_evk.c create mode 100644 board/freescale/imx8mp_evk/lpddr4_timing.c create mode 100644 board/freescale/imx8mp_evk/spl.c create mode 100644 configs/imx8mp_evk_defconfig create mode 100644 drivers/clk/imx/clk-imx8mp.c create mode 100644 drivers/power/pmic/pca9450.c create mode 100644 drivers/power/pmic/pmic_pca9450.c create mode 100644 include/configs/imx8mp_evk.h create mode 100644 include/dt-bindings/clock/imx8mp-clock.h create mode 100644 include/power/pca9450.h Regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic(a)denx.de =====================================================================

2 1

[PULL] u-boot-socfpga/master
by Marek Vasut 09 Jan '20

09 Jan '20

The following changes since commit 5a8fa095cb848c60c630a83edf30d4fc46101e90: Merge branch 'next' (2020-01-06 17:07:49 -0500) are available in the Git repository at: git://git.denx.de/u-boot-socfpga.git master for you to fetch changes up to 8097aee3abc3b773aceea01f756a38b34b274e1e: ddr: socfpga: Enable ARM64 Non-Secure SDRAM ECC Access (2020-01-07 14:38:34 +0100) ---------------------------------------------------------------- Ley Foon Tan (24): spl: Allow cache drivers to be used in SPL arm: dts: socfpga: Add u-boot, dm-pre-reloc for sysmgr and clkmgr nodes arm: socfpga: Convert reset manager from struct to defines arm: socfpga: Convert system manager from struct to defines arm: socfpga: Convert clock manager from struct to defines arm: socfpga: agilex: Add base address for Intel Agilex SoC arm: socfpga: Move firewall code to firewall file arm: socfpga: Move Stratix10 and Agilex reset manager common code arm: socfpga: agilex: Add reset manager support arm: socfpga: Move Stratix10 and Agilex system manager common code arm: socfpga: agilex: Add system manager support arm: socfpga: Move Stratix10 and Agilex clock manager common code arm: socfpga: Fix CLKMGR_INTOSC_HZ to 400MHz clk: agilex: Add clock driver for Agilex arm: socfpga: agilex: Add clock wrapper functions cache: Add Arteris Ncore cache coherent unit driver arm: agilex: Add clock handoff offset for Agilex ddr: altera: Restructure Stratix 10 SDRAM driver ddr: altera: agilex: Add SDRAM driver for Agilex board: intel: agilex: Add socdk board support for Intel Agilex SoC arm: socfpga: agilex: Add SPL for Agilex SoC arm: dts: agilex: Add base dtsi and devkit dts configs: socfpga: Move Stratix10 and Agilex common CONFIGs arm: socfpga: agilex: Enable Agilex SoC build Simon Goldschmidt (1): configs: socfpga: fix building Stratix10 and Agilex Thor Thayer (2): arm: socfpga: stratix10: Enable SMMU access ddr: socfpga: Enable ARM64 Non-Secure SDRAM ECC Access arch/arm/Kconfig | 4 +- arch/arm/dts/Makefile | 1 + arch/arm/dts/socfpga-common-u-boot.dtsi | 8 + arch/arm/dts/socfpga.dtsi | 2 +- arch/arm/dts/socfpga_agilex-u-boot.dtsi | 96 +++++++++++ arch/arm/dts/socfpga_agilex.dtsi | 622 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi | 39 +++++ arch/arm/dts/socfpga_agilex_socdk.dts | 141 +++++++++++++++ arch/arm/dts/socfpga_arria10.dtsi | 2 +- arch/arm/dts/socfpga_arria10_socdk.dtsi | 8 + arch/arm/dts/socfpga_stratix10.dtsi | 2 +- arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi | 8 + arch/arm/mach-socfpga/Kconfig | 16 ++ arch/arm/mach-socfpga/Makefile | 17 ++ arch/arm/mach-socfpga/clock_manager.c | 14 +- arch/arm/mach-socfpga/clock_manager_agilex.c | 85 ++++++++++ arch/arm/mach-socfpga/clock_manager_arria10.c | 155 +++++++++-------- arch/arm/mach-socfpga/clock_manager_gen5.c | 211 +++++++++++++---------- arch/arm/mach-socfpga/clock_manager_s10.c | 218 ++++++++++++++---------- arch/arm/mach-socfpga/firewall.c | 107 ++++++++++++ arch/arm/mach-socfpga/include/mach/base_addr_s10.h | 4 + arch/arm/mach-socfpga/include/mach/clock_manager.h | 4 + arch/arm/mach-socfpga/include/mach/clock_manager_agilex.h | 14 ++ arch/arm/mach-socfpga/include/mach/clock_manager_arria10.h | 133 ++++++--------- arch/arm/mach-socfpga/include/mach/clock_manager_gen5.h | 112 +++++------- arch/arm/mach-socfpga/include/mach/clock_manager_s10.h | 131 ++++++-------- arch/arm/mach-socfpga/include/mach/clock_manager_soc64.h | 21 +++ arch/arm/mach-socfpga/include/mach/{firewall_s10.h => firewall.h} | 17 +- arch/arm/mach-socfpga/include/mach/handoff_s10.h | 9 +- arch/arm/mach-socfpga/include/mach/misc.h | 1 + arch/arm/mach-socfpga/include/mach/reset_manager.h | 7 +- arch/arm/mach-socfpga/include/mach/reset_manager_arria10.h | 43 +---- arch/arm/mach-socfpga/include/mach/reset_manager_gen5.h | 22 +-- arch/arm/mach-socfpga/include/mach/reset_manager_s10.h | 118 ------------- arch/arm/mach-socfpga/include/mach/reset_manager_soc64.h | 38 +++++ arch/arm/mach-socfpga/include/mach/system_manager.h | 7 +- arch/arm/mach-socfpga/include/mach/system_manager_arria10.h | 94 +++------- arch/arm/mach-socfpga/include/mach/system_manager_gen5.h | 123 +++----------- arch/arm/mach-socfpga/include/mach/system_manager_s10.h | 176 ------------------- arch/arm/mach-socfpga/include/mach/system_manager_soc64.h | 123 ++++++++++++++ arch/arm/mach-socfpga/mailbox_s10.c | 6 +- arch/arm/mach-socfpga/misc.c | 66 ++++++++ arch/arm/mach-socfpga/misc_arria10.c | 11 +- arch/arm/mach-socfpga/misc_gen5.c | 38 +++-- arch/arm/mach-socfpga/misc_s10.c | 9 +- arch/arm/mach-socfpga/reset_manager_arria10.c | 73 ++++---- arch/arm/mach-socfpga/reset_manager_gen5.c | 37 ++-- arch/arm/mach-socfpga/reset_manager_s10.c | 56 +++--- arch/arm/mach-socfpga/scan_manager.c | 6 +- arch/arm/mach-socfpga/spl_a10.c | 12 +- arch/arm/mach-socfpga/spl_agilex.c | 98 +++++++++++ arch/arm/mach-socfpga/spl_gen5.c | 26 ++- arch/arm/mach-socfpga/spl_s10.c | 109 ++---------- arch/arm/mach-socfpga/system_manager_gen5.c | 42 +++-- arch/arm/mach-socfpga/system_manager_s10.c | 42 +++-- arch/arm/mach-socfpga/wrap_pll_config_s10.c | 20 ++- board/intel/agilex-socdk/MAINTAINERS | 7 + board/intel/agilex-socdk/Makefile | 7 + board/intel/agilex-socdk/socfpga.c | 7 + common/spl/Kconfig | 6 + configs/socfpga_agilex_defconfig | 60 +++++++ drivers/Makefile | 1 + drivers/cache/Kconfig | 8 + drivers/cache/Makefile | 3 +- drivers/cache/cache-ncore.c | 164 ++++++++++++++++++ drivers/clk/altera/Makefile | 1 + drivers/clk/altera/clk-agilex.c | 579 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/clk/altera/clk-agilex.h | 237 ++++++++++++++++++++++++++ drivers/ddr/altera/Kconfig | 6 +- drivers/ddr/altera/Makefile | 3 +- drivers/ddr/altera/sdram_agilex.c | 168 ++++++++++++++++++ drivers/ddr/altera/sdram_gen5.c | 12 +- drivers/ddr/altera/sdram_s10.c | 320 +++------------------------------- drivers/ddr/altera/sdram_s10.h | 148 +--------------- drivers/ddr/altera/sdram_soc64.c | 305 +++++++++++++++++++++++++++++++++ drivers/ddr/altera/sdram_soc64.h | 187 ++++++++++++++++++++ drivers/fpga/socfpga_arria10.c | 7 +- drivers/fpga/socfpga_gen5.c | 4 +- drivers/mmc/socfpga_dw_mmc.c | 17 +- drivers/sysreset/sysreset_socfpga.c | 6 +- include/configs/socfpga_agilex_socdk.h | 12 ++ include/configs/socfpga_soc64_common.h | 202 ++++++++++++++++++++++ include/configs/socfpga_stratix10_socdk.h | 192 +-------------------- include/dt-bindings/clock/agilex-clock.h | 71 ++++++++ 84 files changed, 4392 insertions(+), 1952 deletions(-) create mode 100644 arch/arm/dts/socfpga_agilex-u-boot.dtsi create mode 100644 arch/arm/dts/socfpga_agilex.dtsi create mode 100644 arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi create mode 100644 arch/arm/dts/socfpga_agilex_socdk.dts create mode 100644 arch/arm/mach-socfpga/clock_manager_agilex.c create mode 100644 arch/arm/mach-socfpga/firewall.c create mode 100644 arch/arm/mach-socfpga/include/mach/clock_manager_agilex.h create mode 100644 arch/arm/mach-socfpga/include/mach/clock_manager_soc64.h rename arch/arm/mach-socfpga/include/mach/{firewall_s10.h => firewall.h} (85%) delete mode 100644 arch/arm/mach-socfpga/include/mach/reset_manager_s10.h create mode 100644 arch/arm/mach-socfpga/include/mach/reset_manager_soc64.h delete mode 100644 arch/arm/mach-socfpga/include/mach/system_manager_s10.h create mode 100644 arch/arm/mach-socfpga/include/mach/system_manager_soc64.h create mode 100644 arch/arm/mach-socfpga/spl_agilex.c create mode 100644 board/intel/agilex-socdk/MAINTAINERS create mode 100644 board/intel/agilex-socdk/Makefile create mode 100644 board/intel/agilex-socdk/socfpga.c create mode 100644 configs/socfpga_agilex_defconfig create mode 100644 drivers/cache/cache-ncore.c create mode 100644 drivers/clk/altera/clk-agilex.c create mode 100644 drivers/clk/altera/clk-agilex.h create mode 100644 drivers/ddr/altera/sdram_agilex.c create mode 100644 drivers/ddr/altera/sdram_soc64.c create mode 100644 drivers/ddr/altera/sdram_soc64.h create mode 100644 include/configs/socfpga_agilex_socdk.h create mode 100644 include/configs/socfpga_soc64_common.h create mode 100644 include/dt-bindings/clock/agilex-clock.h

2 1

[PULL u-boot] Please pull u-boot-amlogic-20200108
by Neil Armstrong 09 Jan '20

09 Jan '20

Hi Tom, This PR adds more support for the Khadas VIM3L, variant of VIM3 but using the Amlogic SM1 S905D3 SoC, plus various small fixes. The CI job is at https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic/pipelines/1780 Thanks, Neil The following changes since commit 0b0c6af38738f2c132cfd41a240889acaa031c8f: Prepare v2020.01 (2020-01-06 15:56:31 -0500) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic.git tags/u-boot-amlogic-20200108 for you to fetch changes up to 262d34363373c10a00279036c1561283c30495c2: board: amlogic: select PWRSEQ for all amlogic platform (2020-01-07 14:50:41 +0100) ---------------------------------------------------------------- - Khadas VIM3L based on Amlogic S905D3 support - Various fixups for amlogic boards - Unnecessary header includes drop into video/meson ---------------------------------------------------------------- Anand Moon (2): configs: meson64: enable GIC support for G12A/G12B board: amlogic: select PWRSEQ for all amlogic platform Christian Hewitt (2): ARM: dts: Import Khadas VIM3L DT from Linux 5.5-rc1 boards: amlogic: add Khadas VIM3L support Simon Glass (1): video: meson: Drop unnecessary header includes arch/arm/dts/Makefile | 1 + arch/arm/dts/meson-sm1-khadas-vim3l.dts | 95 +++++++++++++++++++++++ arch/arm/mach-meson/Kconfig | 1 + board/amlogic/w400/MAINTAINERS | 1 + board/amlogic/w400/README.khadas-vim3l | 132 ++++++++++++++++++++++++++++++++ configs/khadas-vim3l_defconfig | 62 +++++++++++++++ drivers/video/meson/meson_canvas.c | 4 + drivers/video/meson/meson_plane.c | 5 ++ drivers/video/meson/meson_vclk.c | 2 + drivers/video/meson/meson_venc.c | 4 + drivers/video/meson/meson_vpu.c | 18 ++++- drivers/video/meson/meson_vpu.h | 17 ++-- drivers/video/meson/meson_vpu_init.c | 4 + include/configs/meson64.h | 2 +- include/video.h | 2 + 15 files changed, 334 insertions(+), 16 deletions(-) create mode 100644 arch/arm/dts/meson-sm1-khadas-vim3l.dts create mode 100644 board/amlogic/w400/README.khadas-vim3l create mode 100644 configs/khadas-vim3l_defconfig

2 1