September 2019 - U-Boot

[U-Boot] [PATCH] arm64: zynqmp: Enable SPI support in SPL for zcu104
by Michal Simek 08 Oct '19

08 Oct '19

It is enabling this mode but full boot is not validated yet. Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- configs/xilinx_zynqmp_zcu104_revC_defconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/configs/xilinx_zynqmp_zcu104_revC_defconfig b/configs/xilinx_zynqmp_zcu104_revC_defconfig index 1c9a6d6f1ec4..2f269009dfe9 100644 --- a/configs/xilinx_zynqmp_zcu104_revC_defconfig +++ b/configs/xilinx_zynqmp_zcu104_revC_defconfig @@ -5,6 +5,8 @@ CONFIG_SYS_MALLOC_F_LEN=0x8000 CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0xff000000 CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_ZYNQMP_USB=y CONFIG_DEBUG_UART=y CONFIG_AHCI=y @@ -16,6 +18,7 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_SPI_LOAD=y CONFIG_SPL_ATF=y CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_MEMTEST=y -- 2.17.1

2 1

[U-Boot] [PATCH] arm64: zynqmp: Add u-boot, dm-pre-reloc to clk300 node
by Michal Simek 08 Oct '19

08 Oct '19

This node is used by qspi driver for supporting qspi boot mode in SPL. Similar changes have beeen done by commit a9022b017a90 ("ARM64: zynqmp: Add u-boot,dm-pre-reloc to clk nodes") Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- arch/arm/dts/zynqmp-clk.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/dts/zynqmp-clk.dtsi b/arch/arm/dts/zynqmp-clk.dtsi index a795efdc15c8..c70f85a43020 100644 --- a/arch/arm/dts/zynqmp-clk.dtsi +++ b/arch/arm/dts/zynqmp-clk.dtsi @@ -38,6 +38,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <300000000>; + u-boot,dm-pre-reloc; }; clk600: clk600 { -- 2.17.1

2 1

[U-Boot] [PATCH] arm64: zynqmp: Enable gpio hog support for zcu102
by Michal Simek 08 Oct '19

08 Oct '19

Gpio hogs are used for GT mux setup after power up. Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 1 + configs/xilinx_zynqmp_zcu102_revA_defconfig | 1 + configs/xilinx_zynqmp_zcu102_revB_defconfig | 1 + 3 files changed, 3 insertions(+) diff --git a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig index 371e6363db2f..52ee2f2a0b04 100644 --- a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig +++ b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig @@ -58,6 +58,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQMPPL=y CONFIG_DM_GPIO=y +CONFIG_GPIO_HOG=y CONFIG_XILINX_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_CADENCE=y diff --git a/configs/xilinx_zynqmp_zcu102_revA_defconfig b/configs/xilinx_zynqmp_zcu102_revA_defconfig index a0fb6c3586cc..2b7cab8add62 100644 --- a/configs/xilinx_zynqmp_zcu102_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu102_revA_defconfig @@ -58,6 +58,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQMPPL=y CONFIG_DM_GPIO=y +CONFIG_GPIO_HOG=y CONFIG_XILINX_GPIO=y CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig index db7c093d5ebc..ce271b5a31ca 100644 --- a/configs/xilinx_zynqmp_zcu102_revB_defconfig +++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig @@ -58,6 +58,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQMPPL=y CONFIG_DM_GPIO=y +CONFIG_GPIO_HOG=y CONFIG_XILINX_GPIO=y CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y -- 2.17.1

2 1

[U-Boot] [PATCH 0/2] xilinx: Add some example scripts for bootmodes
by Michal Simek 08 Oct '19

08 Oct '19

Hi, mostly yocto guys asked us to provide default scripts for supporting distribution boot mode which is done by these 2 patches. Thanks, Michal Siva Durga Prasad Paladugu (2): xilinx: Add qspi boot command script for reference xilinx: Add sd boot command script for reference board/xilinx/bootscripts/qspiboot.cmd | 10 ++++++++++ board/xilinx/bootscripts/sdboot.cmd | 10 ++++++++++ 2 files changed, 20 insertions(+) create mode 100644 board/xilinx/bootscripts/qspiboot.cmd create mode 100644 board/xilinx/bootscripts/sdboot.cmd -- 2.17.1

2 4

[U-Boot] [PATCH] arm64: zynqmp: Define default SPL_TEXT_BASE address in Kconfig
by Michal Simek 08 Oct '19

08 Oct '19

Define default address via Kconfig. There is no need to change this address for most of the boards but it is also possible. This one line save a lot of lines in defconfigs that's why make sense to do it. The similar change has been done by commit 9340d8fe8beb ("sunxi: move CONFIG_SPL_TEXT_BASE from *_defconfig to Kconfig") Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- common/spl/Kconfig | 1 + configs/avnet_ultra96_rev1_defconfig | 1 - configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig | 1 - configs/xilinx_zynqmp_mini_emmc0_defconfig | 1 - configs/xilinx_zynqmp_mini_emmc1_defconfig | 1 - configs/xilinx_zynqmp_mini_qspi_defconfig | 1 - configs/xilinx_zynqmp_zc1232_revA_defconfig | 1 - configs/xilinx_zynqmp_zc1254_revA_defconfig | 1 - configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig | 1 - configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig | 1 - configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig | 1 - configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig | 1 - configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig | 1 - configs/xilinx_zynqmp_zcu100_revC_defconfig | 1 - configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 1 - configs/xilinx_zynqmp_zcu102_revA_defconfig | 1 - configs/xilinx_zynqmp_zcu102_revB_defconfig | 1 - configs/xilinx_zynqmp_zcu104_revA_defconfig | 1 - configs/xilinx_zynqmp_zcu104_revC_defconfig | 1 - configs/xilinx_zynqmp_zcu106_revA_defconfig | 1 - configs/xilinx_zynqmp_zcu111_revA_defconfig | 1 - configs/xilinx_zynqmp_zcu1275_revA_defconfig | 1 - configs/xilinx_zynqmp_zcu1275_revB_defconfig | 1 - 23 files changed, 1 insertion(+), 22 deletions(-) diff --git a/common/spl/Kconfig b/common/spl/Kconfig index f467eca2be72..59a7b200891f 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -138,6 +138,7 @@ config SPL_TEXT_BASE default 0x10060 if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN9I default 0x20060 if MACH_SUN50I_H6 default 0x00060 if ARCH_SUNXI + default 0xfffc0000 if ARCH_ZYNQMP default 0x0 help The address in memory that SPL will be running from. diff --git a/configs/avnet_ultra96_rev1_defconfig b/configs/avnet_ultra96_rev1_defconfig index b504332ff006..924153081149 100644 --- a/configs/avnet_ultra96_rev1_defconfig +++ b/configs/avnet_ultra96_rev1_defconfig @@ -13,7 +13,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig index b326231b6829..f463318565ff 100644 --- a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig +++ b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig @@ -15,7 +15,6 @@ CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y CONFIG_BOOTDELAY=0 # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_MEMTEST=y diff --git a/configs/xilinx_zynqmp_mini_emmc0_defconfig b/configs/xilinx_zynqmp_mini_emmc0_defconfig index 0faa3326132d..b4162abdd715 100644 --- a/configs/xilinx_zynqmp_mini_emmc0_defconfig +++ b/configs/xilinx_zynqmp_mini_emmc0_defconfig @@ -12,7 +12,6 @@ CONFIG_SUPPORT_RAW_INITRD=y # CONFIG_BOARD_LATE_INIT is not set # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="ZynqMP> " diff --git a/configs/xilinx_zynqmp_mini_emmc1_defconfig b/configs/xilinx_zynqmp_mini_emmc1_defconfig index 867d2e5d9cee..76d5aa6c713b 100644 --- a/configs/xilinx_zynqmp_mini_emmc1_defconfig +++ b/configs/xilinx_zynqmp_mini_emmc1_defconfig @@ -12,7 +12,6 @@ CONFIG_SUPPORT_RAW_INITRD=y # CONFIG_BOARD_LATE_INIT is not set # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="ZynqMP> " diff --git a/configs/xilinx_zynqmp_mini_qspi_defconfig b/configs/xilinx_zynqmp_mini_qspi_defconfig index b0bc84d55eca..a20534a488ca 100644 --- a/configs/xilinx_zynqmp_mini_qspi_defconfig +++ b/configs/xilinx_zynqmp_mini_qspi_defconfig @@ -14,7 +14,6 @@ CONFIG_ZYNQMP_NO_DDR=y # CONFIG_LEGACY_IMAGE_FORMAT is not set # CONFIG_BOARD_LATE_INIT is not set # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set diff --git a/configs/xilinx_zynqmp_zc1232_revA_defconfig b/configs/xilinx_zynqmp_zc1232_revA_defconfig index aa2165f77adb..80a310fb1cee 100644 --- a/configs/xilinx_zynqmp_zc1232_revA_defconfig +++ b/configs/xilinx_zynqmp_zc1232_revA_defconfig @@ -13,7 +13,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zc1254_revA_defconfig b/configs/xilinx_zynqmp_zc1254_revA_defconfig index 1ab0639eb9e2..75ec572827bf 100644 --- a/configs/xilinx_zynqmp_zc1254_revA_defconfig +++ b/configs/xilinx_zynqmp_zc1254_revA_defconfig @@ -13,7 +13,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig index 7b1f5e9d0ae3..ce1ea089ce8d 100644 --- a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig @@ -15,7 +15,6 @@ CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig b/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig index ae2554a8eb74..01c29c0e70a3 100644 --- a/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig @@ -15,7 +15,6 @@ CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig b/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig index 559a61e8d020..877f5b230da3 100644 --- a/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig @@ -13,7 +13,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig b/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig index cc2af6dce0ac..6f14234a590e 100644 --- a/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig @@ -12,7 +12,6 @@ CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig b/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig index bf66171335d2..f1970aadf417 100644 --- a/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig @@ -12,7 +12,6 @@ CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zcu100_revC_defconfig b/configs/xilinx_zynqmp_zcu100_revC_defconfig index 4b3f72da7487..cd7d2f5376d2 100644 --- a/configs/xilinx_zynqmp_zcu100_revC_defconfig +++ b/configs/xilinx_zynqmp_zcu100_revC_defconfig @@ -13,7 +13,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig index ef291a7d38ef..371e6363db2f 100644 --- a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig +++ b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig @@ -16,7 +16,6 @@ CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zcu102_revA_defconfig b/configs/xilinx_zynqmp_zcu102_revA_defconfig index 975e9f5eb13b..a0fb6c3586cc 100644 --- a/configs/xilinx_zynqmp_zcu102_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu102_revA_defconfig @@ -16,7 +16,6 @@ CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig index 34918aa17196..db7c093d5ebc 100644 --- a/configs/xilinx_zynqmp_zcu102_revB_defconfig +++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig @@ -16,7 +16,6 @@ CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zcu104_revA_defconfig b/configs/xilinx_zynqmp_zcu104_revA_defconfig index e4090dc28122..eacf75d9f8e2 100644 --- a/configs/xilinx_zynqmp_zcu104_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu104_revA_defconfig @@ -13,7 +13,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zcu104_revC_defconfig b/configs/xilinx_zynqmp_zcu104_revC_defconfig index 25a2515d1552..1c9a6d6f1ec4 100644 --- a/configs/xilinx_zynqmp_zcu104_revC_defconfig +++ b/configs/xilinx_zynqmp_zcu104_revC_defconfig @@ -13,7 +13,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zcu106_revA_defconfig b/configs/xilinx_zynqmp_zcu106_revA_defconfig index 212de924a68a..1b685ca04925 100644 --- a/configs/xilinx_zynqmp_zcu106_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu106_revA_defconfig @@ -15,7 +15,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zcu111_revA_defconfig b/configs/xilinx_zynqmp_zcu111_revA_defconfig index dec894787e21..74106d7ea8fa 100644 --- a/configs/xilinx_zynqmp_zcu111_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu111_revA_defconfig @@ -13,7 +13,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zcu1275_revA_defconfig b/configs/xilinx_zynqmp_zcu1275_revA_defconfig index c73a97a050cc..b9110ca3b936 100644 --- a/configs/xilinx_zynqmp_zcu1275_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu1275_revA_defconfig @@ -13,7 +13,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zcu1275_revB_defconfig b/configs/xilinx_zynqmp_zcu1275_revB_defconfig index 0d4302ea737c..03372c77e637 100644 --- a/configs/xilinx_zynqmp_zcu1275_revB_defconfig +++ b/configs/xilinx_zynqmp_zcu1275_revB_defconfig @@ -13,7 +13,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y -- 2.17.1

3 2

[U-Boot] [RFC PATCH] mmc: sdhci: add support for switching to UHS-I modes on ZynqMP Platform
by Michal Simek 08 Oct '19

08 Oct '19

From: T Karthik Reddy <t.karthik.reddy(a)xilinx.com> This patch adds support for switching to UHS-I modes on ZynqMP platform. There is one issue with the ZynqMP ZCU102 where it is not able to power cycle the SD card. Due to this once the card is initialized in UHS-I mode it cannot be reinitialized in UHS-I mode again. So to solve this issue there are some of the checks are made in place to ensure that the card operates in UHS-I mode even on reinitialization. This will enable the SD host controller to run SD at UHS-I mode in u-boot if it was running at UHS-I mode already. Signed-off-by: T Karthik Reddy <t.karthik.reddy(a)xilinx.com> Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- drivers/mmc/mmc.c | 20 ++++++++++++++++++++ include/mmc.h | 2 ++ 2 files changed, 22 insertions(+) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index c8f71cd0c1b6..3d25f11942ff 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -1711,6 +1711,26 @@ static int sd_select_mode_and_width(struct mmc *mmc, uint card_caps) /* Restrict card's capabilities by what the host can do */ caps = card_caps & mmc->host_caps; + /* + * If the card is already in 1.8V and the system doesn't have + * mechanism to power cycle the SD card, it will respond with no 1.8V + * supported in OCR response. Below check will confirm if the above + * condition has occurred. + * + * If the host is supporting UHS modes and the card is supporting SD + * specification 3.0 and above, it can operate at UHS modes. + */ +#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) + if (!uhs_en && !(mmc_host_is_spi(mmc)) && + mmc->scr[0] & SD_SCR0_SPEC3 && + (mmc->card_caps & MMC_MODE_MASK) >= MMC_CAP(UHS_SDR50) && + (mmc->host_caps & MMC_MODE_MASK) >= MMC_CAP(UHS_SDR50)) { + uhs_en = true; + err = mmc_set_signal_voltage(mmc, MMC_SIGNAL_VOLTAGE_180); + if (err) + return err; + } +#endif if (!uhs_en) caps &= ~UHS_CAPS; diff --git a/include/mmc.h b/include/mmc.h index 686ba0065654..e959ffef2948 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -66,6 +66,7 @@ #define MMC_MODE_HS200 MMC_CAP(MMC_HS_200) #define MMC_MODE_HS400 MMC_CAP(MMC_HS_400) #define MMC_MODE_HS400_ES MMC_CAP(MMC_HS_400_ES) +#define MMC_MODE_MASK (MMC_CAP(MMC_MODES_END) - 1) #define MMC_CAP_NONREMOVABLE BIT(14) #define MMC_CAP_NEEDS_POLL BIT(15) @@ -140,6 +141,7 @@ static inline bool mmc_is_tuning_cmd(uint cmdidx) /* SCR definitions in different words */ #define SD_HIGHSPEED_BUSY 0x00020000 #define SD_HIGHSPEED_SUPPORTED 0x00020000 +#define SD_SCR0_SPEC3 BIT(15) #define UHS_SDR12_BUS_SPEED 0 #define HIGH_SPEED_BUS_SPEED 1 -- 2.17.1

2 1

[U-Boot] [PATCH 1/4] ARM: dts: at91: sam9x60: add onewire node
by Eugen.Hristev＠microchip.com 07 Oct '19

07 Oct '19

From: Eugen Hristev <eugen.hristev(a)microchip.com> Add onewire node for w1 support. Signed-off-by: Eugen Hristev <eugen.hristev(a)microchip.com> --- arch/arm/dts/sam9x60.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/dts/sam9x60.dtsi b/arch/arm/dts/sam9x60.dtsi index 9c16ba1..e01539e 100644 --- a/arch/arm/dts/sam9x60.dtsi +++ b/arch/arm/dts/sam9x60.dtsi @@ -22,6 +22,7 @@ serial0 = &dbgu; gpio0 = &pioA; gpio1 = &pioB; + gpio3 = &pioD; spi0 = &qspi; }; @@ -155,6 +156,14 @@ clocks = <&pioB_clk>; }; + pioD: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + #gpio-cells = <2>; + gpio-controller; + clocks = <&pioD_clk>; + }; + pmc: pmc@fffffc00 { compatible = "atmel,at91sam9x5-pmc"; reg = <0xfffffc00 0x200>; @@ -212,6 +221,11 @@ reg = <3>; }; + pioD_clk: pioD_clk { + #clock-cells = <0>; + reg = <44>; + }; + sdhci0_clk: sdhci0_clk { #clock-cells = <0>; reg = <12>; @@ -282,4 +296,9 @@ }; }; }; + + onewire_tm: onewire { + compatible = "w1-gpio"; + status = "disabled"; + }; }; -- 2.7.4

1 4

[U-Boot] [U-boot][PATCH v3 00/14] Add support for sam9x60ek
by Tudor.Ambarus＠microchip.com 07 Oct '19

07 Oct '19

From: Tudor Ambarus <tudor.ambarus(a)microchip.com> Add support for sam9x60 SOC, sam9x60ek board, dts, NAND and QSPI. Add defconfigs for MMC, NAND and QSPI. v3: - Enable MII utility commands and phy in qspi & nand defconfigs - Add sam9x60-sdhci and sam9x60-macb compatibility strings - nandflash_defconfig: Fix rootfs partition v2: add maintainers for qspi & nand defconfigs Nicolas Ferre (2): net: macb: Add sam9x60-macb compatibility string ARM: dts: at91: sam9x60: Add macb0 Ethernet controller Sandeep Sheriker Mallikarjun (5): mmc: atmel_sdhci: Add sam9x60-sdhci compatibility string ARM: at91: Add sam9x60 soc ARM: dts: Add dts files for sam9x60ek board: atmel: Add sam9x60ek board configs: Add sam9x60ek_mmc_defconfig Tudor Ambarus (7): ARM: at91: Rename sama5_sfr.h to at91_sfr.h ARM: at91: Add SFR definitions board: sam9x60ek: Add NAND flash support configs: Add sam9x60ek_nandflash_defconfig configs: sam9x60ek: Add QSPI_BOOT defines ARM: dts: at91: sam9x60ek: Enable qspi node configs: Add sam9x60ek_qspiflash_defconfig arch/arm/dts/Makefile | 2 + arch/arm/dts/sam9x60.dtsi | 285 +++++++++++++++++++++ arch/arm/dts/sam9x60ek-u-boot.dtsi | 132 ++++++++++ arch/arm/dts/sam9x60ek.dts | 55 ++++ arch/arm/mach-at91/Kconfig | 11 + arch/arm/mach-at91/arm926ejs/Makefile | 1 + arch/arm/mach-at91/arm926ejs/sam9x60_devices.c | 125 +++++++++ arch/arm/mach-at91/armv7/sama5d4_devices.c | 2 +- arch/arm/mach-at91/atmel_sfr.c | 2 +- .../include/mach/{sama5_sfr.h => at91_sfr.h} | 52 +++- arch/arm/mach-at91/include/mach/hardware.h | 2 + arch/arm/mach-at91/include/mach/sam9x60.h | 169 ++++++++++++ board/atmel/sam9x60ek/Kconfig | 12 + board/atmel/sam9x60ek/MAINTAINERS | 9 + board/atmel/sam9x60ek/Makefile | 7 + board/atmel/sam9x60ek/sam9x60ek.c | 120 +++++++++ board/laird/wb50n/wb50n.c | 2 +- configs/sam9x60ek_mmc_defconfig | 52 ++++ configs/sam9x60ek_nandflash_defconfig | 53 ++++ configs/sam9x60ek_qspiflash_defconfig | 75 ++++++ drivers/clk/at91/clk-utmi.c | 2 +- drivers/mmc/atmel_sdhci.c | 1 + drivers/net/macb.c | 1 + include/configs/sam9x60ek.h | 95 +++++++ 24 files changed, 1258 insertions(+), 9 deletions(-) create mode 100644 arch/arm/dts/sam9x60.dtsi create mode 100644 arch/arm/dts/sam9x60ek-u-boot.dtsi create mode 100644 arch/arm/dts/sam9x60ek.dts create mode 100644 arch/arm/mach-at91/arm926ejs/sam9x60_devices.c rename arch/arm/mach-at91/include/mach/{sama5_sfr.h => at91_sfr.h} (53%) create mode 100644 arch/arm/mach-at91/include/mach/sam9x60.h create mode 100644 board/atmel/sam9x60ek/Kconfig create mode 100644 board/atmel/sam9x60ek/MAINTAINERS create mode 100644 board/atmel/sam9x60ek/Makefile create mode 100644 board/atmel/sam9x60ek/sam9x60ek.c create mode 100644 configs/sam9x60ek_mmc_defconfig create mode 100644 configs/sam9x60ek_nandflash_defconfig create mode 100644 configs/sam9x60ek_qspiflash_defconfig create mode 100644 include/configs/sam9x60ek.h -- 2.9.5

2 15

[U-Boot] [PATCH] cmd: host: fix seg fault at "host info"
by AKASHI Takahiro 07 Oct '19

07 Oct '19

With the patch below applied, host_block_dev structure was switched to be placed in platdata rather than priv. The command "host info" must be aligned with this change. Otherwise, we will see "Segmentation Fault." Fixes: 8f994c860d91 ("sandbox: blk: Switch to use platdata_auto_alloc_size for the driver data") Signed-off-by: AKASHI Takahiro <takahiro.akashi(a)linaro.org> --- cmd/host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/cmd/host.c b/cmd/host.c index f7d3eae5b1ad..98c4d2a099e9 100644 --- a/cmd/host.c +++ b/cmd/host.c @@ -89,7 +89,7 @@ static int do_host_info(cmd_tbl_t *cmdtp, int flag, int argc, struct host_block_dev *host_dev; #ifdef CONFIG_BLK - host_dev = dev_get_priv(blk_dev->bdev); + host_dev = dev_get_platdata(blk_dev->bdev); #else host_dev = blk_dev->priv; #endif -- 2.21.0

4 5

[U-Boot] [PATCH 0/5] riscv: sifive/fu540: Enable SPI-NOR support
by Jagan Teki 06 Oct '19

06 Oct '19

This patchset, enable SPI-NOR flash on SiFive hifive-unleashed-a00 board. patch 0001 - 02: support devicetree patch 0003: add is25wp256 chip patch 0004 - 05: enable spi-nor flash All tested in Sifive fuse540 hifive-unleashed-a00 board. Any inputs? Jagan. Jagan Teki (5): riscv: dts: Add hifive-unleashed-a00 dts from Linux sifive: fu540: Enable OF_SEPARATE mtd: spi-nor: ids: Add is25wp256 chip riscv: dts: hifive-unleashed-a00: Add -u-boot.dtsi sifive: fu540: Enable spi-nor flash support arch/riscv/dts/Makefile | 1 + arch/riscv/dts/fu540-c000.dtsi | 235 ++++++++++++++++++ .../dts/hifive-unleashed-a00-u-boot.dtsi | 11 + arch/riscv/dts/hifive-unleashed-a00.dts | 88 +++++++ board/sifive/fu540/Kconfig | 3 + configs/sifive_fu540_defconfig | 3 +- doc/board/sifive/fu540.rst | 21 +- drivers/mtd/spi/spi-nor-ids.c | 2 + 8 files changed, 362 insertions(+), 2 deletions(-) create mode 100644 arch/riscv/dts/fu540-c000.dtsi create mode 100644 arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi create mode 100644 arch/riscv/dts/hifive-unleashed-a00.dts -- 2.18.0.321.gffc6fa0e3

3 20