March 2019 - U-Boot

[U-Boot] [PATCH v2] fastboot: Improve error reporting on 'getvar partition-{size, type}'
by Eugeniu Rosca 29 Mar '19

29 Mar '19

Currently U-Boot reports the same error message in all below cases: [A] host> fastboot getvar partition-type [B] host> fastboot getvar partition-size [C] host> fastboot getvar partition-type: [D] host> fastboot getvar partition-size: [E] host> fastboot getvar partition-type:<invalid-part> [F] host> fastboot getvar partition-size:<invalid-part> The message looks like: host> fastboot getvar partition-size: getvar:partition-size: FAILED (remote: partition not found) Finished. Total time: 0.003s Be more user friendly and output: - "partition not given" for [A-D] - "partition not found" for [E-F] Fixes: f73a7df984a9 ("net: fastboot: Merge AOSP UDP fastboot") Signed-off-by: Eugeniu Rosca <erosca(a)de.adit-jv.com> --- v2: - Link v1: https://patchwork.ozlabs.org/patch/1058755/ - Benefit from the existing error strings rather than bloating the code with new ones. --- drivers/fastboot/fb_mmc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/fastboot/fb_mmc.c b/drivers/fastboot/fb_mmc.c index 4c1c7fd2cd8d..d04d8a448ccf 100644 --- a/drivers/fastboot/fb_mmc.c +++ b/drivers/fastboot/fb_mmc.c @@ -308,8 +308,8 @@ int fastboot_mmc_get_part_info(char *part_name, struct blk_desc **dev_desc, fastboot_fail("block device not found", response); return -ENOENT; } - if (!part_name) { - fastboot_fail("partition not found", response); + if (!part_name || !strcmp(part_name, "")) { + fastboot_fail("partition not given", response); return -ENOENT; } -- 2.21.0

2 1

[U-Boot] [PATCH v4] arm: dts: Stratix10: Add QSPI node
by Ley Foon Tan 29 Mar '19

29 Mar '19

Add QSPI device tree to Stratix 10. Sync from Linux Stratix 10 dts. Tested on Stratix 10 SoC devkit. SOCFPGA_STRATIX10 # sf probe 0:0 SF: Detected mt25qu02g with page size 256 Bytes, erase size 64 KiB, total 256 MiB Signed-off-by: Ley Foon Tan <ley.foon.tan(a)intel.com> --- v3->v4: - Add qspi node to dtsi based on alphabetical order - Add spi-tx-bus-width and spi-rx-bus-width v2->v3: - Change flash compatible to "jedec,spi-nor" - Change spi-max-frequency to 100MHz --- arch/arm/dts/socfpga_stratix10.dtsi | 15 +++++++++++++++ arch/arm/dts/socfpga_stratix10_socdk.dts | 23 +++++++++++++++++++++++ 2 files changed, 38 insertions(+) diff --git a/arch/arm/dts/socfpga_stratix10.dtsi b/arch/arm/dts/socfpga_stratix10.dtsi index ee93725d648..fde76774047 100644 --- a/arch/arm/dts/socfpga_stratix10.dtsi +++ b/arch/arm/dts/socfpga_stratix10.dtsi @@ -237,6 +237,21 @@ reg = <0xffe00000 0x100000>; }; + qspi: spi@ff8d2000 { + compatible = "cdns,qspi-nor"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xff8d2000 0x100>, + <0xff900000 0x100000>; + interrupts = <0 3 4>; + cdns,fifo-depth = <128>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x00000000>; + bus-num = <0>; + status = "disabled"; + u-boot,dm-pre-reloc; + }; + rst: rstmgr@ffd11000 { #reset-cells = <1>; compatible = "altr,rst-mgr"; diff --git a/arch/arm/dts/socfpga_stratix10_socdk.dts b/arch/arm/dts/socfpga_stratix10_socdk.dts index c59b77d8298..438b43fef6b 100644 --- a/arch/arm/dts/socfpga_stratix10_socdk.dts +++ b/arch/arm/dts/socfpga_stratix10_socdk.dts @@ -10,6 +10,7 @@ aliases { serial0 = &uart0; + spi0 = &qspi; }; chosen { @@ -87,6 +88,28 @@ smplsel = <0>; }; +&qspi { + status = "okay"; + + flash@0 { + u-boot,dm-pre-reloc; + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* chip select */ + spi-max-frequency = <100000000>; + + page-size = <256>; + block-size = <16>; /* 2^16, 64KB */ + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + &uart0 { status = "okay"; }; -- 2.19.0

3 4

[U-Boot] Fit image
by snathick techno 29 Mar '19

29 Mar '19

sir, i am working with fit image, my question is should i write one more dts file or should i add cryptographic information to the existig myboard.dts file.what is the path should i keep my fit-image.its file in u-boot source tree. Thanking you snathicktechno

1 0

[U-Boot] Please pull ARC last minute changes for 2019.04
by Alexey Brodkin 29 Mar '19

29 Mar '19

Hi Tom, The following changes since commit 2b9b9cdd5f9ae1cbc786ba3c2255a51b3ea4a636: Merge branch '2019-03-25-master-imports' (2019-03-26 23:17:21 -0400) are available in the Git repository at: git://git.denx.de/u-boot-arc.git tags/arc-last-minute-for-2019.04 for you to fetch changes up to 34d117b1fb055920e742baafdd9c1a390c480519: hsdk: readme: Suggest getting pyelftools with pip (2019-03-28 10:50:32 +0300) ---------------------------------------------------------------- This is last minute change which fixes problems in runtime on AXS10x board caused by some changes in NAND framework and tiny documentation improvement. Anyways NAND flash storage was never really used on the board for various reasons and now we decided to drop it for good. Note this change only touches 1 ARC board so that should be safe for others. As usual - build tested in TravisCI, see https://travis-ci.org/abrodkin/u-boot/builds/512041342 ---------------------------------------------------------------- Alexey Brodkin (1): hsdk: readme: Suggest getting pyelftools with pip Eugeniy Paltsev (1): ARC: AXS10x: drop NAND support board/synopsys/axs10x/Makefile | 1 - board/synopsys/axs10x/nand.c | 242 ---------------------------------------------------------------------------------------------------------------------- board/synopsys/hsdk/README | 7 ++-- configs/axs101_defconfig | 1 - configs/axs103_defconfig | 1 - include/configs/axs10x.h | 6 --- 6 files changed, 4 insertions(+), 254 deletions(-) delete mode 100644 board/synopsys/axs10x/nand.c -Alexey

2 1

[U-Boot] [PULL] u-boot-socfpga/master
by Marek Vasut 29 Mar '19

29 Mar '19

The following changes since commit cfb3e102c4bdf96a41cbd3eeb1d3a9a56c69c46c: Merge branch '2019-03-22-master-imports' (2019-03-22 19:09:58 -0400) are available in the Git repository at: git://git.denx.de/u-boot-socfpga.git master for you to fetch changes up to 3d0cc01d101abc3efd5feabe85f22a42ebcbcca2: configs: Stratix10: Remove CONFIG_USE_TINY_PRINTF (2019-03-25 20:26:45 +0100) ---------------------------------------------------------------- Ley Foon Tan (1): configs: Stratix10: Remove CONFIG_USE_TINY_PRINTF configs/socfpga_stratix10_defconfig | 1 - 1 file changed, 1 deletion(-)

2 1

[U-Boot] [PULL] u-boot-sh/master
by Marek Vasut 29 Mar '19

29 Mar '19

Various fixes for bugs found by u-boot test.py The following changes since commit cfb3e102c4bdf96a41cbd3eeb1d3a9a56c69c46c: Merge branch '2019-03-22-master-imports' (2019-03-22 19:09:58 -0400) are available in the Git repository at: git://git.denx.de/u-boot-sh.git master for you to fetch changes up to c453fe3a0513f758c7d0b580307909637eb31c9f: mmc: tmio: Clamp SD_SECCNT to 16bit values on 16bit IP (2019-03-25 20:26:53 +0100) ---------------------------------------------------------------- Marek Vasut (6): ARM: dts: rmobile: Increase off-on delay on the SD Vcc regulator clk: renesas: Fix SDH clock divider decoding on Gen2 clk: renesas: Fix swapped div and mul in debug output on Gen2 clk: renesas: Add support for setting MMCIF clock divider on Gen2 mmc: sh_mmcif: Set default MMCIF clock rate mmc: tmio: Clamp SD_SECCNT to 16bit values on 16bit IP arch/arm/dts/r8a7795-h3ulcb-u-boot.dts | 4 ++++ arch/arm/dts/r8a7795-salvator-x-u-boot.dts | 8 ++++++++ arch/arm/dts/r8a7796-m3ulcb-u-boot.dts | 4 ++++ arch/arm/dts/r8a7796-salvator-x-u-boot.dts | 8 ++++++++ arch/arm/dts/r8a77965-salvator-x-u-boot.dts | 8 ++++++++ arch/arm/dts/r8a77990-ebisu-u-boot.dts | 2 ++ drivers/clk/renesas/clk-rcar-gen2.c | 58 ++++++++++++++++++++++++++++++++++++++++++++++++++++------ drivers/mmc/sh_mmcif.c | 2 +- drivers/mmc/tmio-common.c | 5 ++++- 9 files changed, 91 insertions(+), 8 deletions(-)

2 1

[U-Boot] [PATCH v3 0/4] arm: socfpga: enable rtc support for the socrates board
by Simon Goldschmidt 28 Mar '19

28 Mar '19

This series contains fixes and config changes to enable the 'date' command talking to the rtc on the socrates board. It contains fixes to the designware i2c driver, enables DM support for the rtc used on the socrates board, adds a missing pull-up and changes the defconfig to enable rtc support by default. This patch applies to socfpga-next. Changes in v3: - pick up missing reviewed-by from v1 - pick up missing reviewed-by from v1 - pick up missing reviewed-by from v1 - pick up missing reviewed-by from v1 Changes in v2: - m41t82: reset HT bit during probe Simon Goldschmidt (4): i2c: designware: fix reset handling on socfpga gen5 rtc: m41t62: add compatible for m41t82 arm: socfpga: socrates: make rtc work configs: socfpga: socrates: enable rtc support board/ebv/socrates/qts/iocsr_config.h | 2 +- configs/socfpga_socrates_defconfig | 2 ++ drivers/i2c/designware_i2c.c | 20 ++++++++++++++------ drivers/rtc/m41t62.c | 11 +++++++++++ 4 files changed, 28 insertions(+), 7 deletions(-) -- 2.19.1

1 4

[U-Boot] [PATCH v3 0/4] arm: socfpga: stack and Kconfig cleanups
by Simon Goldschmidt 28 Mar '19

28 Mar '19

This series cleans up stack definitions in socfpga_common.h as well as cleans up defconfig files by implying/defaulting common things in Kconfig files. Finally, it reduces the malloc pool size used in first stage of gen5 SPL (without ddr available) in order to have more space available for code. As this series does not contain direct bugfixes, it targets the socfpga-next branch. Note that this series is meant for socfpga-next but depends on the generic series "spl: full-featured heap cleanups" from: https://patchwork.ozlabs.org/project/uboot/list/?series=99561 Changes in v3: - removed patch 2/5 from v2 (moved to patchwork #1067366, series #99561) - adapt to socfpge-next: imply USE_TINY_PRINTF only for gen5 & a10, not s10 Changes in v2: - fix commit message: "SPL post-reloc", not "SPL pre-reloc" - added patch to imply/default common config options - added patch to reduce gen5 SPL initial malloc pool to 2 KiB Simon Goldschmidt (4): arm: socfpga: fix comment about SPL memory layout arm: socfpga: put initial U-Boot stack into DDR arm: socfpga: imply/default common config options arm: socfpga: gen5: reduce SPL pre-reloc malloc arch/arm/Kconfig | 2 ++ arch/arm/mach-socfpga/Kconfig | 24 ++++++++++++++++++++++++ configs/socfpga_arria10_defconfig | 8 -------- configs/socfpga_arria5_defconfig | 10 ---------- configs/socfpga_cyclone5_defconfig | 10 ---------- configs/socfpga_dbm_soc1_defconfig | 10 ---------- configs/socfpga_de0_nano_soc_defconfig | 10 ---------- configs/socfpga_de10_nano_defconfig | 10 ---------- configs/socfpga_de1_soc_defconfig | 10 ---------- configs/socfpga_is1_defconfig | 8 -------- configs/socfpga_sockit_defconfig | 10 ---------- configs/socfpga_socrates_defconfig | 10 ---------- configs/socfpga_sr1500_defconfig | 10 ---------- configs/socfpga_stratix10_defconfig | 3 --- configs/socfpga_vining_fpga_defconfig | 10 ---------- include/configs/socfpga_common.h | 26 ++++++++++++++++---------- 16 files changed, 42 insertions(+), 129 deletions(-) -- 2.19.1

1 4

[U-Boot] AHCI issue on Intel Apollolake
by Christian Gmeiner 28 Mar '19

28 Mar '19

Has anybody a hint for me? => scsi rescan Reset SCSI scanning bus for devices... ahci mmio_base=0xcf42c000 ahci_host_init: start cap 0xe536ff01 port_map 0x3 n_ports 2 SATA link ok. Spinning up device on SATA port 0... Target spinup took 0 ms. ok. PORT_SCR_ERR 0x0 PORT_IRQ_STAT 0x0 SATA port 0 status: 0x123 SATA link 1 timeout. HOST_CTL 0x80000000 HOST_CTL 0x80000002 AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode flags: 64bit ncq pm clo only pmp pio slum part apst Enter start port: 0 Port 0 status: 123 cmd_slot = 7a88c800 cmd_tbl_dma = 7a88ca00 Exit start port 0 PORT_SCR_ERR 0x0 PORT_SCR_STAT 0x123 Can not start port 0 Enter ahci_device_data_io: for port 0 ahci_dcache_flush_range: flush dcache: [0x7a88c800, 0x7a88d100) ahci_dcache_flush_range: flush dcache: [0x7a874340, 0x7a874540) timeout exit! scsi_ahci: SCSI inquiry command failure. SCSI command 0x12 ret errno -5 Enter ahci_device_data_io: for port 1 No Link on port 1! scsi_ahci: SCSI inquiry command failure. SCSI command 0x12 ret errno -5 => -- greets -- Christian Gmeiner, MSc https://christian-gmeiner.info

1 0

[U-Boot] [PATCH v2 0/3] toradex: common: fix/improve config block handling
by Marcel Ziswiler 28 Mar '19

28 Mar '19

This series adds a -y parameter to cfgblock create command, unifies the behaviour when the config block is missing and fixes an off-by-one issue. Changes in v2: - Introduced a define for the Toradex OUI ("0x00142dUL") as suggested by Igor. - Removed redundant comment as suggested by Igor. Bhuvanchandra DV (1): toradex: common: unify behaviour when config block is missing Dominik Sliwa (1): toradex: configblock: add an -y parameter to 'cfgblock create’ Marcel Ziswiler (1): tdx-cfg-block: fix off by one issue board/toradex/common/tdx-cfg-block.c | 41 ++++++++++++++++++---------- board/toradex/common/tdx-common.c | 34 ++++++++++++----------- 2 files changed, 45 insertions(+), 30 deletions(-) -- 2.20.1

2 4