March 2019 - U-Boot

[U-Boot] [PATCH 0/5] Use Android DT image format for TI boards
by Sam Protsenko 29 Mar '19

29 Mar '19

Android documentation recommends using new image format for storing dtb and dtbo files: [1]. Using that format, we can pack several dtb files to dtb.img, and also pack several dtbo files to dtbo.img. Then those images should be flashed to eMMC partitions, called "dtb" and "dtbo" respectively. This patch series introduces support for mentioned Android DT image format, adds "dtimg" command to deal with that image format from U-Boot shell, and provides new Android boot scheme to TI boards (AM57x and DRA7 boards). So with this patch series we will have next procedure for Android boot: 1. Read next images from eMMC partitions to RAM: - boot.img - dtb.img - dtbo.img 2. Take addresses of desired dtb/dtbo files from that images (for current board) 3. Apply dtbo overlays to main dtb, if needed 4. Boot the kernel from Android boot image, using resulting dtb It was tested on X15 and AM57x EVM boards. [1] https://source.android.com/devices/architecture/dto/partitions Sam Protsenko (5): common: Add support for Android DT image cmd: Add dtimg command arm: ti: boot: Extract PARTS_DEFAULT to boot.h arm: ti: boot: Add dtbo partition for Android boot arm: ti: boot: Implement Android boot using DT image format board/ti/common/Kconfig | 1 + cmd/Kconfig | 8 ++ cmd/Makefile | 1 + cmd/dtimg.c | 142 ++++++++++++++++++++++++++++++ common/Makefile | 4 + common/image-android-dt.c | 134 ++++++++++++++++++++++++++++ configs/am57xx_evm_defconfig | 1 + configs/am57xx_hs_evm_defconfig | 1 + configs/dra7xx_evm_defconfig | 1 + configs/dra7xx_hs_evm_defconfig | 1 + include/configs/am57xx_evm.h | 25 ------ include/configs/cl-som-am57x.h | 2 + include/configs/cm_t54.h | 2 + include/configs/dra7xx_evm.h | 25 ------ include/configs/ti_armv7_common.h | 1 + include/dt_table.h | 46 ++++++++++ include/environment/ti/boot.h | 68 ++++++++++++-- include/image-android-dt.h | 18 ++++ 18 files changed, 422 insertions(+), 59 deletions(-) create mode 100644 cmd/dtimg.c create mode 100644 common/image-android-dt.c create mode 100644 include/dt_table.h create mode 100644 include/image-android-dt.h -- 2.17.0

4 21

[U-Boot] [PATCH 00/36] rockchip: clean up board file for rockchip SoCs
by Kever Yang 29 Mar '19

29 Mar '19

This patch set is to clean code for board related file, after this patch set, all the Rockchip SoCs will share the same tpl/spl/board file and very similar boot flow. tpl.c: target for init DDR sdram, only internal sram available, prefer tpl to be as simple as possible and then back to backrom; spl.c: target for load U-Boot and Trust(option) image and boot into next stage, init DDR sdram if no tpl exist; board.c: use for U-Boot proper for all Rockchip SoCs. We prefer to reduce boot flow option like RETURN_TO_BROM in SPL/TPL, and will enable trust(ATF or OPTEE) support for all SoCs with TrustZone, will share scripts for link and firmware package. Only rk3399 is using spl+Trust/U-Boot and all other SoCs should go to tpl+spl_Trust/U-Boot mode now. Kever Yang (36): rockchip: rk3288: move configure_l2ctlr back to rk3288 rockchip: add common MACRO to enable sys arch timer rockchip: enable SYS_NS16550 for all SoCs by default rockchip: defconfig: remove CONFIG_SYS_NS16550 rockchip: add STIMER_BASE for all SoCs rockchip: add IRAM_START_ADDR for all SoCs rockchip: rk3328: add BOOT_MODE_REG for rk3328 rockchip: rk322x: remove use rockchip timer as sys timer rockchip: rk322x: sdram: use common udelay instead of rockchip_udelay rockchip: rk322x: prepare to use common board file rockchip: defconfig enable sysreset for rk3229 spl rockchip: rk3036: sdram: use udelay instead of rockchip_udelay rockchip: rk3036: remove sys timer rockchip: rk3036: prepare to use commong board file rockchip: declare sdram_init() in common header rockchip: sdram-common: add api to pass dram info to trust os rockchip: sdram_common: add common dram_init_banksize rockchip: rk3188: remove rockchip timer as sys timer rockchip: rk3188: prepare to use common board file rockchip: rk3128: remove rockchip timer as systimer rockchip: rk3128: prepare use common board file rockchip: dts: rk3288: update spl-boot-order rockchip: rk3288: remove rockchip timer for sys timer armv8: add timer_get_boot_us() for generic timer rockchip: rk3288: prepare to use common board file rockchip: rk1108: remove rockchip timer for sys timer rockchip: rv1108: prepare to use common board file rockchip: rk3328: prepare to use common board file rockchip: rk3368: prepare to use common board file rockchip: lion-rk3368: remove rockchip timer rockchip: rk3399: prepare to use common board file rockchip: remove rk_timer rockchip: dts: rk3399-firefly: enable uart2 in spl rockchip: spl-boot-order: do not enable with OF_PLATDATA rockchip: declear boot_devices in bootrom.h rockchip: add common board file for rockchip platform arch/arm/Kconfig | 1 + arch/arm/cpu/armv8/generic_timer.c | 6 + arch/arm/dts/rk3288-phycore-rdk.dts | 6 +- arch/arm/dts/rk3288-veyron.dtsi | 6 +- arch/arm/dts/rk3399-firefly.dts | 1 + arch/arm/include/asm/arch-rockchip/bootrom.h | 2 + arch/arm/include/asm/arch-rockchip/sdram_common.h | 4 + arch/arm/include/asm/arch-rockchip/sys_proto.h | 25 +- arch/arm/mach-rockchip/Kconfig | 38 ++- arch/arm/mach-rockchip/Makefile | 23 +- arch/arm/mach-rockchip/{rk3128-board.c => board.c} | 93 +++--- arch/arm/mach-rockchip/rk3036-board.c | 104 ------- arch/arm/mach-rockchip/rk3036/Makefile | 2 +- .../{rk3036-board-spl.c => rk3036/rk3036.c} | 41 +-- arch/arm/mach-rockchip/rk3036/sdram_rk3036.c | 33 +- arch/arm/mach-rockchip/rk3188-board-spl.c | 226 -------------- arch/arm/mach-rockchip/rk3188-board.c | 82 ----- arch/arm/mach-rockchip/rk3188/Makefile | 1 + arch/arm/mach-rockchip/rk3188/rk3188.c | 23 ++ arch/arm/mach-rockchip/rk322x-board.c | 155 ---------- arch/arm/mach-rockchip/rk322x/Makefile | 2 +- .../{rk322x-board-spl.c => rk322x/rk322x.c} | 86 ++---- arch/arm/mach-rockchip/rk3288-board-spl.c | 304 ------------------ arch/arm/mach-rockchip/rk3288-board-tpl.c | 84 ----- arch/arm/mach-rockchip/rk3288-board.c | 338 --------------------- arch/arm/mach-rockchip/rk3288/rk3288.c | 328 +++++++++++++++++++- arch/arm/mach-rockchip/rk3328/rk3328.c | 59 +++- arch/arm/mach-rockchip/rk3368-board-spl.c | 73 ----- arch/arm/mach-rockchip/rk3368-board-tpl.c | 157 ---------- arch/arm/mach-rockchip/rk3368/rk3368.c | 116 ++++++- arch/arm/mach-rockchip/rk3399-board-spl.c | 179 ----------- arch/arm/mach-rockchip/rk3399-board.c | 14 - arch/arm/mach-rockchip/rk3399/rk3399.c | 86 +++++- arch/arm/mach-rockchip/rk_timer.c | 48 --- arch/arm/mach-rockchip/rv1108/rv1108.c | 8 - arch/arm/mach-rockchip/sdram_common.c | 84 ++++- arch/arm/mach-rockchip/spl-boot-order.c | 2 +- arch/arm/mach-rockchip/spl.c | 195 ++++++++++++ arch/arm/mach-rockchip/tpl.c | 111 +++++++ board/chipspark/popmetal_rk3288/popmetal-rk3288.c | 9 +- board/geekbuying/geekbox/geekbox.c | 5 - board/mqmaker/miqi_rk3288/miqi-rk3288.c | 7 - board/phytec/phycore_rk3288/phycore-rk3288.c | 45 ++- board/rockchip/evb_px5/evb-px5.c | 5 - board/rockchip/evb_rk3288/evb-rk3288.c | 7 - .../rockchip/evb_rk3288_rk1608/evb-rk3288-rk1608.c | 8 + board/rockchip/evb_rk3328/evb-rk3328.c | 66 ---- board/rockchip/evb_rk3399/evb-rk3399.c | 56 ++-- board/rockchip/evb_rv1108/evb_rv1108.c | 6 - board/rockchip/fennec_rk3288/fennec-rk3288.c | 7 - board/rockchip/sheep_rk3368/sheep_rk3368.c | 5 - board/rockchip/tinker_rk3288/tinker-rk3288.c | 2 +- board/theobroma-systems/lion_rk3368/lion_rk3368.c | 8 - board/theobroma-systems/puma_rk3399/puma-rk3399.c | 17 +- configs/evb-rk3128_defconfig | 1 - configs/evb-rk3229_defconfig | 2 +- configs/evb-rk3288_defconfig | 1 - configs/evb-rk3328_defconfig | 1 - configs/evb-rk3399_defconfig | 1 - configs/fennec-rk3288_defconfig | 1 - configs/firefly-rk3288_defconfig | 1 - configs/firefly-rk3399_defconfig | 1 - configs/lion-rk3368_defconfig | 4 - configs/miqi-rk3288_defconfig | 1 - configs/phycore-rk3288_defconfig | 1 - configs/popmetal-rk3288_defconfig | 1 - configs/puma-rk3399_defconfig | 1 - configs/tinker-rk3288_defconfig | 1 - configs/vyasa-rk3288_defconfig | 1 - drivers/ram/rockchip/sdram_rk322x.c | 29 +- include/configs/rk3036_common.h | 7 - include/configs/rk3128_common.h | 6 - include/configs/rk3188_common.h | 5 - include/configs/rk322x_common.h | 4 - include/configs/rk3288_common.h | 6 - include/configs/rk3328_common.h | 2 - include/configs/rk3368_common.h | 4 - include/configs/rk3399_common.h | 4 - include/configs/rockchip-common.h | 6 + include/configs/rv1108_common.h | 8 - 80 files changed, 1248 insertions(+), 2251 deletions(-) rename arch/arm/mach-rockchip/{rk3128-board.c => board.c} (63%) delete mode 100644 arch/arm/mach-rockchip/rk3036-board.c rename arch/arm/mach-rockchip/{rk3036-board-spl.c => rk3036/rk3036.c} (50%) delete mode 100644 arch/arm/mach-rockchip/rk3188-board-spl.c delete mode 100644 arch/arm/mach-rockchip/rk3188-board.c create mode 100644 arch/arm/mach-rockchip/rk3188/rk3188.c delete mode 100644 arch/arm/mach-rockchip/rk322x-board.c rename arch/arm/mach-rockchip/{rk322x-board-spl.c => rk322x/rk322x.c} (51%) delete mode 100644 arch/arm/mach-rockchip/rk3288-board-spl.c delete mode 100644 arch/arm/mach-rockchip/rk3288-board-tpl.c delete mode 100644 arch/arm/mach-rockchip/rk3288-board.c delete mode 100644 arch/arm/mach-rockchip/rk3368-board-spl.c delete mode 100644 arch/arm/mach-rockchip/rk3368-board-tpl.c delete mode 100644 arch/arm/mach-rockchip/rk3399-board-spl.c delete mode 100644 arch/arm/mach-rockchip/rk3399-board.c delete mode 100644 arch/arm/mach-rockchip/rk_timer.c create mode 100644 arch/arm/mach-rockchip/spl.c create mode 100644 arch/arm/mach-rockchip/tpl.c create mode 100644 board/rockchip/evb_rk3288_rk1608/evb-rk3288-rk1608.c -- 1.9.1

9 137

[U-Boot] [RESEND][PATCH v1 0/4] usb: dwc2_udc_otg: Add tx_fifo_sz array support
by Patrice Chotard 29 Mar '19

29 Mar '19

dwc2 bindings specifies that g-tx-fifo-size is an array of tx fifo size for endpoint (except ep0) as shown below: - g-tx-fifo-size = <256 128 128 64 64 32>; Current implementation apply the same fifo size to all tx fifo. In order to apply different fifo size, introduce a tx_fifo_sz array filled with DT g-tx-fifo-size entry. All DWC2 variant doesn't implement 16 hardware endpoint as currently hardcoded. This information can be retrieved from HWCFG4 register. This series is also addressing this point. This series adds: - Read max hardware endpoint from HWCFG4 register - Add tx fifo size array support _ Update stm32mp1 board and DT to use tx_fifo_sz array Patrice Chotard (4): usb: dwc2_udc_otg: Read MAX_HW_ENDPOINT from HWCFG4 register usb: dwc2_udc_otg: Add tx_fifo_sz array support board: stm32mp1: Add tx_fifo_sz_array support ARM: dts: stm32: Remove g-tx-fifo-size from stm32mp157c-ev1-u-boot arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi | 4 ---- board/st/stm32mp1/stm32mp1.c | 11 +++++++++-- drivers/usb/gadget/dwc2_udc_otg.c | 18 ++++++++++++++++-- drivers/usb/gadget/dwc2_udc_otg_priv.h | 1 - drivers/usb/gadget/dwc2_udc_otg_regs.h | 17 ++++++++++++----- include/usb/dwc2_udc.h | 6 ++++++ 6 files changed, 43 insertions(+), 14 deletions(-) -- 1.9.1

4 12

[U-Boot] [PATCH] travis-ci: fix at91 missing boards
by Eugen.Hristev＠microchip.com 29 Mar '19

29 Mar '19

From: Eugen Hristev <eugen.hristev(a)microchip.com> Fix missing at91 boards and split the at91 in two categories: at91 arm v7 at91 arm926esj which are the two main cores for the at91 architecture. Signed-off-by: Eugen Hristev <eugen.hristev(a)microchip.com> --- Hello, I am not very good with Travis, I added this because buildman atmel has lesser total boards than buildman at91. buildman at91 has 78 boards so I split into two tasks, to avoid hitting the 50minutes limit on travis build. Here is a link to travis with this patch applied: https://travis-ci.org/ehristev/u-boot/builds/511575257 Thanks .travis.yml | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/.travis.yml b/.travis.yml index 834502f..6179689 100644 --- a/.travis.yml +++ b/.travis.yml @@ -167,9 +167,12 @@ matrix: env: - JOB="arm926ejs" BUILDMAN="arm926ejs -x freescale,siemens,atmel,kirkwood,spear,omap" - - name: "buildman atmel" + - name: "buildman at91 (non arm v7)" env: - - BUILDMAN="atmel" + - BUILDMAN="at91 -x armv7" + - name: "buildman at91 (non arm926ejs)" + env: + - BUILDMAN="at91 -x arm926ejs" - name: "buildman boundary engicam toradex" env: - BUILDMAN="boundary engicam toradex" -- 2.7.4

2 1

[U-Boot] [PATCH 0/2] Update pbias and IO voltage in dra7 and am57 devices
by Faiz Abbas 29 Mar '19

29 Mar '19

The following patches update pbias and IO voltages in TI's dra7 and am57 devices. Tested on: dra71x-evm, dra72x-evm, dra7xx-evm, dra76x-evm, am57xx-evm, am571-idk, am572-idk, am574-idk, am335x-evm. Faiz Abbas (2): ARM: dts: dra7: Change pbias voltage to 3.3V mmc: omap_hsmmc: Set 3.3V for IO voltage arch/arm/dts/dra7.dtsi | 2 +- drivers/mmc/omap_hsmmc.c | 21 ++++++++++----------- drivers/power/regulator/pbias_regulator.c | 2 +- 3 files changed, 12 insertions(+), 13 deletions(-) -- 2.19.2

1 3

[U-Boot] [PATCH v5 00/11] rockchip: add tpl and OPTEE support for rk3229
by Kever Yang 29 Mar '19

29 Mar '19

Add some generic options for TPL support for arm 32bit, and then and TPL support for rk3229(cortex-A7), and then add OPTEE support in SPL. Version 5 rebase on master branch with 'SYS_SOC name correct' patch set, remove the patches for OP-TEE which has been mergerd. Kever Yang (11): Revert "rockchip: rk322x: ram: enable DRAM init in SPL instead of TPL" arm: add option for TPL support in arm 32bit arm: add a separate stack for TPL rockchip: rk322x: add CLK_EMMC_SAMPLE clock support rockchip: clk: rk322x: fix assert clock value rockchip: rk322x: add tpl support sysreset: enable driver support in SPL/TPL rockchip: rk322x: dts: enable uart2 for SPL/TPL rockchip: evb-rk3229: remove unnecessary defines rockchip: evb-rk3229: add README file for OP-TEE support rockchip: evb-rk322x: update defconfig with tpl and optee support arch/arm/Kconfig | 29 +++++++++ arch/arm/dts/rk3229-evb.dts | 1 + arch/arm/lib/crt0.S | 4 +- arch/arm/mach-rockchip/Kconfig | 26 ++++++++ arch/arm/mach-rockchip/Makefile | 3 +- arch/arm/mach-rockchip/rk322x-board-spl.c | 46 ++++++--------- arch/arm/mach-rockchip/rk322x-board-tpl.c | 53 +++++++++++++++++ arch/arm/mach-rockchip/u-boot-tpl.lds | 12 ++++ board/rockchip/evb_rk3229/README | 72 +++++++++++++++++++++++ configs/evb-rk3229_defconfig | 25 ++++++-- drivers/clk/rockchip/clk_rk322x.c | 6 +- drivers/ram/rockchip/sdram_rk322x.c | 12 ++-- drivers/sysreset/Kconfig | 18 ++++++ drivers/sysreset/Makefile | 2 +- include/configs/evb_rk3229.h | 44 +------------- include/configs/rk322x_common.h | 10 ++-- 16 files changed, 272 insertions(+), 91 deletions(-) create mode 100644 arch/arm/mach-rockchip/rk322x-board-tpl.c create mode 100644 arch/arm/mach-rockchip/u-boot-tpl.lds create mode 100644 board/rockchip/evb_rk3229/README -- 2.20.1

1 11

[U-Boot] [PATCH] net: eth-uclass: call stop only for active devices
by Keerthy 29 Mar '19

29 Mar '19

Currently stop is being called unconditionally without even checking if start is called. In case of multiple instances eth being present many devices might just be initialized without a start call in such cases stop might lead unpredictable behaviors including aborts and crashes. Hence add a check before calling stop. Signed-off-by: Keerthy <j-keerthy(a)ti.com> --- net/eth-uclass.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/eth-uclass.c b/net/eth-uclass.c index 2ef20df192..26f7e0b8cd 100644 --- a/net/eth-uclass.c +++ b/net/eth-uclass.c @@ -531,7 +531,8 @@ static int eth_pre_remove(struct udevice *dev) { struct eth_pdata *pdata = dev->platdata; - eth_get_ops(dev)->stop(dev); + if (eth_is_active(dev)) + eth_get_ops(dev)->stop(dev); /* clear the MAC address */ memset(pdata->enetaddr, 0, ARP_HLEN); -- 2.17.1

5 7

[U-Boot] [PATCH] socfpga: add Simon Goldschmidt as co-custodian
by Simon Goldschmidt 29 Mar '19

29 Mar '19

This updates MAINTAINERS and git-mailrc to add me as a co-custodian for socfpga. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt(a)gmail.com> --- MAINTAINERS | 1 + doc/git-mailrc | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 8a4c5d4eab..37e2baca80 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -82,6 +82,7 @@ F: arch/arm/ ARM ALTERA SOCFPGA M: Marek Vasut <marex(a)denx.de> +M: Simon Goldschmidt <simon.k.r.goldschmidt(a)gmail.com> S: Maintainted T: git git://git.denx.de/u-boot-socfpga.git F: arch/arm/mach-socfpga/ diff --git a/doc/git-mailrc b/doc/git-mailrc index c2eee8c7d8..768c3ff926 100644 --- a/doc/git-mailrc +++ b/doc/git-mailrc @@ -39,6 +39,7 @@ alias prafulla Prafulla Wadaskar <prafulla(a)marvell.com> alias prom Minkyu Kang <mk7.kang(a)samsung.com> alias ptomsich Philipp Tomsich <philipp.tomsich(a)theobroma-systems.com> alias sbabic Stefano Babic <sbabic(a)denx.de> +alias simongoldschmidt Simon Goldschmidt <simon.k.r.goldschmidt(a)gmail.com> alias sjg Simon Glass <sjg(a)chromium.org> alias smcnutt Scott McNutt <smcnutt(a)psyent.com> alias stroese Stefan Roese <sr(a)denx.de> @@ -64,7 +65,7 @@ alias s3c samsung alias s5pc samsung alias samsung uboot, prom alias snapdragon uboot, mateusz -alias socfpga uboot, marex, dinh +alias socfpga uboot, marex, dinh, simongoldschmidt alias sunxi uboot, jagan, maxime alias tegra uboot, sjg, Tom Warren <twarren(a)nvidia.com>, Stephen Warren <swarren(a)nvidia.com> alias tegra2 tegra -- 2.19.1

3 2

[U-Boot] [PATCHv4 00/12] pci: Add PCIe Gen4 controller driver for NXP Layerscape SoCs
by Z.q. Hou 29 Mar '19

29 Mar '19

From: Hou Zhiqiang <Zhiqiang.Hou(a)nxp.com> Add PCIe Gen4 driver for the NXP Layerscape series SoCs. Hou Zhiqiang (12): armv8: fsl-layerscpae: correct the PCIe controllers' region size armv8: lx2160a: add MMU table entries for PCIe pci: Add PCIe Gen4 controller driver for NXP Layerscape SoCs kconfig: add dependency PCIE_LAYERSCAPE_GEN4 for FSL_PCIE_COMPAT pci: ls_pcie_g4: add device tree fixups for PCI Stream IDs armv8: lx2160a: add PCIe controller DT nodes armv8: lx2160a: enable PCIe support pci: ls_pcie_g4: add Workaround for A-011577 dm: pci: add APIs for capability accessors dm: pci: add APIs for MPS and MRRS accessors pci: ls_pcie_g4: Add Workaround for A-011451 pci: ls_pcie_g4: add Workaround for A-011452 arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 2 +- arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 12 + arch/arm/dts/fsl-lx2160a.dtsi | 85 +++ .../arm/include/asm/arch-fsl-layerscape/cpu.h | 9 + .../asm/arch-fsl-layerscape/immap_lsch3.h | 14 +- configs/lx2160aqds_tfa_SECURE_BOOT_defconfig | 5 + configs/lx2160aqds_tfa_defconfig | 6 + configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 5 + configs/lx2160ardb_tfa_defconfig | 6 + drivers/pci/Kconfig | 8 + drivers/pci/Makefile | 2 + drivers/pci/pci-uclass.c | 245 ++++++++ drivers/pci/pci_auto.c | 35 ++ drivers/pci/pcie_layerscape_gen4.c | 593 ++++++++++++++++++ drivers/pci/pcie_layerscape_gen4.h | 273 ++++++++ drivers/pci/pcie_layerscape_gen4_fixup.c | 249 ++++++++ include/pci.h | 33 + include/pci_ids.h | 1 + 18 files changed, 1581 insertions(+), 2 deletions(-) create mode 100644 drivers/pci/pcie_layerscape_gen4.c create mode 100644 drivers/pci/pcie_layerscape_gen4.h create mode 100644 drivers/pci/pcie_layerscape_gen4_fixup.c -- 2.17.1

3 18

[U-Boot] [PATCH v1] apalis/colibri_imx6: add device trees to makefile
by Marcel Ziswiler 29 Mar '19

29 Mar '19

From: Marcel Ziswiler <marcel.ziswiler(a)toradex.com> Add device trees to Makefile to avoid newly introduced error: Device Tree Source is not correctly specified. Please define 'CONFIG_DEFAULT_DEVICE_TREE' or build with 'DEVICE_TREE=<device_tree>' argument make[1]: *** [dts/Makefile:28: arch/arm/dts/imx6-apalis.dtb] Error 1 make: *** [Makefile:1009: dts/dt.dtb] Error 2 Signed-off-by: Marcel Ziswiler <marcel.ziswiler(a)toradex.com> --- arch/arm/dts/Makefile | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index e261c5936b..7b7ccfd204 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -481,6 +481,10 @@ dtb-$(CONFIG_MX6UL) += \ dtb-$(CONFIG_MX6ULL) += imx6ull-14x14-evk.dtb +dtb-$(CONFIG_ARCH_MX6) += \ + imx6-apalis.dtb \ + imx6-colibri.dtb + dtb-$(CONFIG_MX7) += imx7d-sdb.dtb \ imx7d-sdb-qspi.dtb -- 2.20.1

3 2