January 2019 - U-Boot

[U-Boot] dfu broken on rk3288 dwc2_otg
by Jack Mitchell 24 Jan '19

24 Jan '19

Hi, Has anyone successfully used DFU on an rk3288 or dwc2_otg based board? When trying to download a binary to the board over DFU it currently seems to timeout and the transfer fails. I have tested the firefly-rk3288 and also the Tinkerboard. I have successfully used the same setup on an am335x beaglebone black on the same U-Boot commit. U-Boot: U-Boot 2019.01-00189-g2acc24fc28 (Jan 21 2019 - 16:27:07 +0000) Model: Firefly-RK3288 DRAM: 4 GiB MMC: dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Model: Firefly-RK3288 Net: Warning: ethernet@ff290000 (eth0) using random MAC address - ba:90:f6:9f:c4:70 eth0: ethernet@ff290000 Hit any key to stop autoboot: 0 => setenv dfu_alt_info "kernel ram ${kernel_addr_r} 0x4000000" => dfu 0 ram 0 Desktop: [jack@arch-corsair rk3288]$ dfu-util -l dfu-util 0.9 Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc. Copyright 2010-2016 Tormod Volden and Stefan Schmidt This program is Free Software and has ABSOLUTELY NO WARRANTY Please report bugs to http://sourceforge.net/p/dfu-util/tickets/ Found DFU: [2207:320a] ver=9999, devnum=84, cfg=1, intf=0, path="5-4.1", alt=0, name="kernel", serial="UNKNOWN" [jack@arch-corsair rk3288]$ dfu-util -D test.img -a 0 dfu-util 0.9 Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc. Copyright 2010-2016 Tormod Volden and Stefan Schmidt This program is Free Software and has ABSOLUTELY NO WARRANTY Please report bugs to http://sourceforge.net/p/dfu-util/tickets/ dfu-util: Invalid DFU suffix signature dfu-util: A valid DFU suffix will be required in a future dfu-util release!!! Opening DFU capable USB device... ID 2207:320a Run-time device DFU version 0110 Claiming USB DFU Interface... Setting Alternate Setting #0 ... Determining device status: state = dfuIDLE, status = 0 dfuIDLE, continuing DFU mode device DFU version 0110 Device returned transfer size 4096 Copying data from PC to DFU device Download [ ] 0% 0 bytes dfu-util: Error during download get_status

4 4

[U-Boot] [PATCH 1/1] test: provide unit test for memory functions
by Heinrich Schuchardt 24 Jan '19

24 Jan '19

Memory functions may have architecture specific implementations. These should be tested. Provide unit tests for memset(), memcpy(), memmove(). Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- Hello Alex, you already picked up the patch correcting memmove for x86_64. x86: do not use i386 code for x86_64 memory functions https://lists.denx.de/pipermail/u-boot/2019-January/355851.html So I think you could also pick this patch for efi-next. Best regards Heinrich --- include/test/lib.h | 14 ++++++++++ include/test/suites.h | 1 + test/Kconfig | 8 ++++++ test/cmd_ut.c | 6 ++++ test/lib/Makefile | 2 ++ test/lib/cmd_ut_lib.c | 20 +++++++++++++ test/lib/string.c | 65 +++++++++++++++++++++++++++++++++++++++++++ 7 files changed, 116 insertions(+) create mode 100644 include/test/lib.h create mode 100644 test/lib/cmd_ut_lib.c create mode 100644 test/lib/string.c diff --git a/include/test/lib.h b/include/test/lib.h new file mode 100644 index 0000000000..12cca61e8b --- /dev/null +++ b/include/test/lib.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2018 Heinrich Schuchardt <xypron.glpk(a)gmx.de> + */ + +#ifndef __TEST_LIB_H__ +#define __TEST_LIB_H__ + +#include <test/test.h> + +/* Declare a new library function test */ +#define LIB_TEST(_name, _flags) UNIT_TEST(_name, _flags, lib_test) + +#endif /* __TEST_LIB_H__ */ diff --git a/include/test/suites.h b/include/test/suites.h index 77d863b4a6..01bee09346 100644 --- a/include/test/suites.h +++ b/include/test/suites.h @@ -27,6 +27,7 @@ int do_ut_bloblist(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]); int do_ut_compression(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]); int do_ut_dm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); int do_ut_env(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); +int do_ut_lib(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); int do_ut_overlay(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); int do_ut_time(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); int do_ut_unicode(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); diff --git a/test/Kconfig b/test/Kconfig index de16d179d0..48a0e501f8 100644 --- a/test/Kconfig +++ b/test/Kconfig @@ -6,6 +6,14 @@ menuconfig UNIT_TEST This does not require sandbox to be included, but it is most often used there. +config UT_LIB + bool "Unit tests for library functions" + depends on UNIT_TEST + default y + help + Enables the 'ut lib' command which tests library functions like + memcat(), memcyp(), memmove(). + config UT_TIME bool "Unit tests for time functions" depends on UNIT_TEST diff --git a/test/cmd_ut.c b/test/cmd_ut.c index 56924a5272..e3b89504e7 100644 --- a/test/cmd_ut.c +++ b/test/cmd_ut.c @@ -46,6 +46,9 @@ static cmd_tbl_t cmd_ut_sub[] = { #ifdef CONFIG_UT_OVERLAY U_BOOT_CMD_MKENT(overlay, CONFIG_SYS_MAXARGS, 1, do_ut_overlay, "", ""), #endif +#ifdef CONFIG_UT_LIB + U_BOOT_CMD_MKENT(lib, CONFIG_SYS_MAXARGS, 1, do_ut_lib, "", ""), +#endif #ifdef CONFIG_UT_TIME U_BOOT_CMD_MKENT(time, CONFIG_SYS_MAXARGS, 1, do_ut_time, "", ""), #endif @@ -108,6 +111,9 @@ static char ut_help_text[] = #ifdef CONFIG_UT_ENV "ut env [test-name]\n" #endif +#ifdef CONFIG_UT_LIB + "ut lib [test-name] - test library functions\n" +#endif #ifdef CONFIG_UT_OVERLAY "ut overlay [test-name]\n" #endif diff --git a/test/lib/Makefile b/test/lib/Makefile index 5a636aac74..308c61708e 100644 --- a/test/lib/Makefile +++ b/test/lib/Makefile @@ -2,5 +2,7 @@ # # (C) Copyright 2018 # Mario Six, Guntermann & Drunck GmbH, mario.six(a)gdsys.cc +obj-y += cmd_ut_lib.o obj-y += hexdump.o obj-y += lmb.o +obj-y += string.o diff --git a/test/lib/cmd_ut_lib.c b/test/lib/cmd_ut_lib.c new file mode 100644 index 0000000000..eb90e53914 --- /dev/null +++ b/test/lib/cmd_ut_lib.c @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 Heinrich Schuchardt <xypron.glpk(a)gmx.de> + * + * Unit tests for library functions + */ + +#include <common.h> +#include <command.h> +#include <test/lib.h> +#include <test/suites.h> +#include <test/ut.h> + +int do_ut_lib(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + struct unit_test *tests = ll_entry_start(struct unit_test, lib_test); + const int n_ents = ll_entry_count(struct unit_test, lib_test); + + return cmd_ut_category("lib", tests, n_ents, argc, argv); +} diff --git a/test/lib/string.c b/test/lib/string.c new file mode 100644 index 0000000000..52ac4809ac --- /dev/null +++ b/test/lib/string.c @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2019 Heinrich Schuchardt <xypron.glpk(a)gmx.de> + * + * Unit tests for memory functions + */ + +#include <common.h> +#include <command.h> +#include <test/lib.h> +#include <test/test.h> +#include <test/ut.h> + +static int lib_memset(struct unit_test_state *uts) +{ + char work[] = "submarine"; + const char expected[] = "suUUUUine"; + char *ptr; + + ptr = memset(work + 2, 'U', 4); + ut_asserteq_ptr(work + 2, ptr); + ut_asserteq_str(expected, work); + + return 0; +} + +LIB_TEST(lib_memset, 0); + +static int lib_memcpy(struct unit_test_state *uts) +{ + char work[] = "elephants"; + const char expected[] = "elelephas"; + char *ptr; + + /* Overlapping forward copy */ + ptr = memcpy(work + 2, "elepha", 6); + ut_asserteq_ptr(work + 2, ptr); + ut_asserteq_str(expected, work); + + return 0; +} + +LIB_TEST(lib_memcpy, 0); + +static int lib_memmove(struct unit_test_state *uts) +{ + char work[] = "elephants"; + const char expected1[] = "eleelents"; + const char expected2[] = "ellentnts"; + char *ptr; + + /* Overlapping forward copy */ + ptr = memcpy(work + 3, work, 3); + ut_asserteq_ptr(work + 3, ptr); + ut_asserteq_str(expected1, work); + + /* Overlapping backward copy */ + ptr = memcpy(work + 2, work + 4, 4); + ut_asserteq_ptr(work + 2, ptr); + ut_asserteq_str(expected2, work); + + return 0; +} + +LIB_TEST(lib_memmove, 0); -- 2.20.1

2 2

[U-Boot] [RESENT PATCH v3] rockchip: update emmc/sd index for distro boot order
by Kever Yang 24 Jan '19

24 Jan '19

According to the emmc/sdcard index in dts alias, emmc is always 0 and sdcard index is 1, let's update to using correct mmc number for distro boot order in common header. SD card suppost to have higher priority so that people can boot into the firmware in SD card, this is very convenient for developer try with distro img from SUSE, Fedora and etc. Developer only need to 'dd' the Distro image(which id download from OS vendor release) into SD card without any modify and then we can boot it up directly. Signed-off-by: Kever Yang <kever.yang(a)rock-chips.com> --- Changes in v3: - update the commit message Series-changes: 2 - update the commit message include/configs/rockchip-common.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/configs/rockchip-common.h b/include/configs/rockchip-common.h index 68e1105a4b..8a72613e52 100644 --- a/include/configs/rockchip-common.h +++ b/include/configs/rockchip-common.h @@ -11,11 +11,11 @@ #ifndef CONFIG_SPL_BUILD -/* First try to boot from SD (index 0), then eMMC (index 1) */ +/* First try to boot from SD (index 1), then eMMC (index 0) */ #if CONFIG_IS_ENABLED(CMD_MMC) #define BOOT_TARGET_MMC(func) \ - func(MMC, mmc, 0) \ - func(MMC, mmc, 1) + func(MMC, mmc, 1) \ + func(MMC, mmc, 0) #else #define BOOT_TARGET_MMC(func) #endif -- 2.18.0

4 14

[U-Boot] [PATCH] arm64: zynqmp: Add ethernet node for zc1275 revB
by Michal Simek 24 Jan '19

24 Jan '19

From: Siva Durga Prasad Paladugu <siva.durga.paladugu(a)xilinx.com> This patch add ethernet node gem1 to zc1275 RevB. GMII to RGMII converter sits between MAC and external phy connected over GMII to MAC and RGMMI to external phy. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu(a)xilinx.com> Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- arch/arm/dts/zynqmp-zc1275-revB.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/dts/zynqmp-zc1275-revB.dts b/arch/arm/dts/zynqmp-zc1275-revB.dts index e84b2da164cc..027ff83562f8 100644 --- a/arch/arm/dts/zynqmp-zc1275-revB.dts +++ b/arch/arm/dts/zynqmp-zc1275-revB.dts @@ -22,6 +22,7 @@ serial1 = &dcc; spi0 = &qspi; mmc0 = &sdhci1; + ethernet0 = &gem1; }; chosen { @@ -39,6 +40,20 @@ status = "okay"; }; +&gem1 { + status = "okay"; + phy-mode = "gmii"; + phy-handle = <&gmiitorgmii>; + phy: ethernet-phy@0 { + reg = <0x0>; + }; + gmiitorgmii: gmiitorgmii@8 { + compatible = "xlnx,gmii-to-rgmii-1.0"; + reg = <8>; + phy-handle = <&phy>; + }; +}; + &qspi { status = "okay"; flash@0 { -- 1.9.1

1 0

[U-Boot] Status of U-Boot for Intel Arria-10 development kit DK-SOC-10AS066S-A
by marcel21 24 Jan '19

24 Jan '19

I was wondering wtaht teh status is of the u-boot configuration of the Intel/Altera Arria-10 development kit. When building the defconfig and copying the SFP to the SD card the preloader starts, but after this it does not detect the MMC. Has anyone ever tested the defconfig (which is for this development kit) on the actual board, or have many patches/changed been implemented without any testing ? -- Sent from: http://u-boot.10912.n7.nabble.com/

1 0

[U-Boot] [PATCH] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL
by tien.fong.chee＠intel.com 24 Jan '19

24 Jan '19

From: Tien Fong Chee <tien.fong.chee(a)intel.com> This is minimum memory pool size required to get SPL booting to U-Boot, such as FPGA program and loading U-Boot image from FAT. Signed-off-by: Tien Fong Chee <tien.fong.chee(a)intel.com> --- include/configs/socfpga_common.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index bd8f5c8..93273a8 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -258,7 +258,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #if defined(CONFIG_TARGET_SOCFPGA_ARRIA10) /* SPL memory allocation configuration, this is for FAT implementation */ #ifndef CONFIG_SYS_SPL_MALLOC_START -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00012000 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_SPL_MALLOC_SIZE + \ CONFIG_SYS_INIT_RAM_ADDR) -- 1.7.7.4

3 2

[U-Boot] [PATCH 1/2] fs: fat: dynamically allocate memory for temporary buffer
by tien.fong.chee＠intel.com 24 Jan '19

24 Jan '19

From: Stefan Agner <stefan.ag...(a)toradex.com> Drop the statically allocated get_contents_vfatname_block and dynamically allocate a buffer only if required. This saves 64KiB of memory. Signed-off-by: Stefan Agner <stefan.ag...(a)toradex.com> Signed-off-by: Tien Fong Chee <tien.fong.chee(a)intel.com> --- fs/fat/fat.c | 19 +++++++++++++------ 1 files changed, 13 insertions(+), 6 deletions(-) diff --git a/fs/fat/fat.c b/fs/fat/fat.c index 8803fb4..aa4636d 100644 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -307,9 +307,6 @@ get_cluster(fsdata *mydata, __u32 clustnum, __u8 *buffer, unsigned long size) * into 'buffer'. * Update the number of bytes read in *gotsize or return -1 on fatal errors. */ -__u8 get_contents_vfatname_block[MAX_CLUSTSIZE] - __aligned(ARCH_DMA_MINALIGN); - static int get_contents(fsdata *mydata, dir_entry *dentptr, loff_t pos, __u8 *buffer, loff_t maxsize, loff_t *gotsize) { @@ -320,7 +317,7 @@ static int get_contents(fsdata *mydata, dir_entry *dentptr, loff_t pos, loff_t actsize; *gotsize = 0; - debug("Filesize: %llu bytes\n", filesize); + debug("Filesize: %llu bytes, starting at pos %llu\n", filesize, pos); if (pos >= filesize) { debug("Read position past EOF: %llu\n", pos); @@ -352,15 +349,25 @@ static int get_contents(fsdata *mydata, dir_entry *dentptr, loff_t pos, /* align to beginning of next cluster if any */ if (pos) { + __u8 *tmp_buffer; + + tmp_buffer = malloc_cache_aligned(MAX_CLUSTSIZE); + if (!tmp_buffer) { + debug("Error: allocating buffer\n"); + return -ENOMEM; + } + actsize = min(filesize, (loff_t)bytesperclust); - if (get_cluster(mydata, curclust, get_contents_vfatname_block, + if (get_cluster(mydata, curclust, tmp_buffer, (int)actsize) != 0) { printf("Error reading cluster\n"); + free(tmp_buffer); return -1; } filesize -= actsize; actsize -= pos; - memcpy(buffer, get_contents_vfatname_block + pos, actsize); + memcpy(buffer, tmp_buffer + pos, actsize); + free(tmp_buffer); *gotsize += actsize; if (!filesize) return 0; -- 1.7.7.4

3 4

[U-Boot] [PATCH] rsa: read out public_exponent value based on 32-bit alignment
by Ooi, Joyce 24 Jan '19

24 Jan '19

Public_exponent is a 64-bit data, which is stored in the device tree blob in a 32-bit alignment address. This causes a problem for ARM64 when public_exponent is read out one shot as a 64-bit data from an unaligned address. Hence, to solve this problem, public_exponent is read out as two 32-bit datas, and then concatenating them. Signed-off-by: Ooi, Joyce <joyce.ooi(a)intel.com> --- lib/rsa/rsa-mod-exp.c | 6 ++++-- 1 files changed, 4 insertions(+), 2 deletions(-) diff --git a/lib/rsa/rsa-mod-exp.c b/lib/rsa/rsa-mod-exp.c index 9d78aa1..3eace38 100644 --- a/lib/rsa/rsa-mod-exp.c +++ b/lib/rsa/rsa-mod-exp.c @@ -252,6 +252,9 @@ int rsa_mod_exp_sw(const uint8_t *sig, uint32_t sig_len, { struct rsa_public_key key; int ret; + uint64_t exponent = + (uint64_t)(*((uint32_t *)(prop->public_exponent + 4))) << 32 | + *((uint32_t *)(prop->public_exponent)); if (!prop) { debug("%s: Skipping invalid prop", __func__); @@ -263,8 +266,7 @@ int rsa_mod_exp_sw(const uint8_t *sig, uint32_t sig_len, if (!prop->public_exponent) key.exponent = RSA_DEFAULT_PUBEXP; else - key.exponent = - fdt64_to_cpu(*((uint64_t *)(prop->public_exponent))); + key.exponent = fdt64_to_cpu(exponent); if (!key.len || !prop->modulus || !prop->rr) { debug("%s: Missing RSA key info", __func__); -- 1.7.1

3 8

[U-Boot] [PATCH v1] mmc: fsl_esdhc: make get_cd work well in dm_mmc_ops
by Yinbo Zhu 24 Jan '19

24 Jan '19

From: Yinbo Zhu <yinbo.zhu(a)nxp.com> This patch is to make get_cd work well when DM_MMC enabled Signed-off-by: Yinbo Zhu <yinbo.zhu(a)nxp.com> --- drivers/mmc/fsl_esdhc.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 5437910..4ec49bc 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -1521,7 +1521,6 @@ static int fsl_esdhc_get_cd(struct udevice *dev) { struct fsl_esdhc_priv *priv = dev_get_priv(dev); - return true; return esdhc_getcd_common(priv); } -- 1.7.1

1 0

[U-Boot] [PULL] u-boot-mips
by Daniel Schwierzeck 24 Jan '19

24 Jan '19

Hi Tom, please pull updates for MIPS https://travis-ci.org/danielschwierzeck/u-boot/builds/483510787 The following changes since commit 7794fe2c8c1303d303dbc515955c6c5be706da88: Merge git://git.denx.de/u-boot-nds32 (2019-01-22 22:00:20 -0500) are available in the Git repository at: git://git.denx.de/u-boot-mips.git tags/mips-pull-2019-01-23 for you to fetch changes up to a834cb817fb1a11607ea8e6394235843be079fdd: MSCC: Add board support for Serval SoC family. (2019-01-23 18:28:09 +0100) ---------------------------------------------------------------- - MIPS: mscc: ocelot: add ethernet switch and network support - MIPS: mscc: add support for ServalT SoC family - MIPS: mscc: add support for Serval SoC family ---------------------------------------------------------------- Gregory CLEMENT (4): MIPS: mscc: ocelot: Add ethernet nodes for Ocelot net: add MSCC Ocelot switch support MIPS: mscc: ocelot: add switch reset support configs: mscc_ocelot: add network support Horatiu Vultur (8): pinctrl: mscc: Add gpio and pinctrl for Servalt SoC family. MSCC: Add support for Servalt SoC family. MSCC: Add board support for Servalt SoC family pinctrl: mscc: Add gpio and pinctrl for Serval SoC family. MSCC: Add support for Serval SoC family. MSCC: add device tree for Serval pcb105 board MSCC: Add device tree for Serval pcb106 board MSCC: Add board support for Serval SoC family. MAINTAINERS | 1 + arch/mips/dts/Makefile | 2 + arch/mips/dts/mscc,ocelot.dtsi | 97 +++ arch/mips/dts/mscc,serval.dtsi | 149 ++++ arch/mips/dts/mscc,servalt.dtsi | 149 ++++ arch/mips/dts/ocelot_pcb123.dts | 20 + arch/mips/dts/serval_pcb105.dts | 56 ++ arch/mips/dts/serval_pcb106.dts | 56 ++ arch/mips/dts/servalt_pcb116.dts | 56 ++ arch/mips/mach-mscc/Kconfig | 17 + arch/mips/mach-mscc/Makefile | 1 + arch/mips/mach-mscc/cpu.c | 4 +- arch/mips/mach-mscc/dram.c | 3 +- arch/mips/mach-mscc/include/mach/common.h | 10 + arch/mips/mach-mscc/include/mach/ddr.h | 30 +- arch/mips/mach-mscc/include/mach/serval/serval.h | 24 + .../include/mach/serval/serval_devcpu_gcb.h | 21 + .../mach/serval/serval_devcpu_gcb_miim_regs.h | 25 + .../include/mach/serval/serval_icpu_cfg.h | 314 +++++++++ arch/mips/mach-mscc/include/mach/servalt/servalt.h | 24 + .../include/mach/servalt/servalt_devcpu_gcb.h | 20 + .../mach/servalt/servalt_devcpu_gcb_miim_regs.h | 25 + .../include/mach/servalt/servalt_icpu_cfg.h | 319 +++++++++ arch/mips/mach-mscc/reset.c | 27 +- board/mscc/ocelot/ocelot.c | 24 + board/mscc/serval/Kconfig | 14 + board/mscc/serval/Makefile | 3 + board/mscc/serval/serval.c | 74 ++ board/mscc/servalt/Kconfig | 14 + board/mscc/servalt/Makefile | 3 + board/mscc/servalt/servalt.c | 52 ++ configs/mscc_ocelot_defconfig | 1 + configs/mscc_serval_defconfig | 62 ++ configs/mscc_servalt_defconfig | 60 ++ drivers/net/Kconfig | 7 + drivers/net/Makefile | 1 + drivers/net/ocelot_switch.c | 765 +++++++++++++++++++++ drivers/pinctrl/mscc/Kconfig | 19 + drivers/pinctrl/mscc/Makefile | 2 + drivers/pinctrl/mscc/pinctrl-serval.c | 233 +++++++ drivers/pinctrl/mscc/pinctrl-servalt.c | 269 ++++++++ include/configs/vcoreiii.h | 5 +- 42 files changed, 3040 insertions(+), 18 deletions(-) create mode 100644 arch/mips/dts/mscc,serval.dtsi create mode 100644 arch/mips/dts/mscc,servalt.dtsi create mode 100644 arch/mips/dts/serval_pcb105.dts create mode 100644 arch/mips/dts/serval_pcb106.dts create mode 100644 arch/mips/dts/servalt_pcb116.dts create mode 100644 arch/mips/mach-mscc/include/mach/serval/serval.h create mode 100644 arch/mips/mach-mscc/include/mach/serval/serval_devcpu_gcb.h create mode 100644 arch/mips/mach-mscc/include/mach/serval/serval_devcpu_gcb_miim_regs.h create mode 100644 arch/mips/mach-mscc/include/mach/serval/serval_icpu_cfg.h create mode 100644 arch/mips/mach-mscc/include/mach/servalt/servalt.h create mode 100644 arch/mips/mach-mscc/include/mach/servalt/servalt_devcpu_gcb.h create mode 100644 arch/mips/mach-mscc/include/mach/servalt/servalt_devcpu_gcb_miim_regs.h create mode 100644 arch/mips/mach-mscc/include/mach/servalt/servalt_icpu_cfg.h create mode 100644 board/mscc/serval/Kconfig create mode 100644 board/mscc/serval/Makefile create mode 100644 board/mscc/serval/serval.c create mode 100644 board/mscc/servalt/Kconfig create mode 100644 board/mscc/servalt/Makefile create mode 100644 board/mscc/servalt/servalt.c create mode 100644 configs/mscc_serval_defconfig create mode 100644 configs/mscc_servalt_defconfig create mode 100644 drivers/net/ocelot_switch.c create mode 100644 drivers/pinctrl/mscc/pinctrl-serval.c create mode 100644 drivers/pinctrl/mscc/pinctrl-servalt.c

2 1