August 2018 - U-Boot

[U-Boot] [PATCH v6 1/8] dm: mmc: use block layer in mmc driver
by Yinbo Zhu 31 Aug '18

31 Aug '18

At present the MMC subsystem maintains its own list of MMC devices. This cannot work with driver model when CONFIG_BLK is enabled, use blk_dread to replace previous mmc read interface, use mmc_get_blk_desc to get the mmc device property Signed-off-by: Yinbo Zhu <yinbo.zhu(a)nxp.com> --- Change in v6: remove block layer in mmc_legacy. arch/arm/cpu/armv8/fsl-layerscape/ppa.c | 5 ++--- drivers/net/fm/fm.c | 2 +- drivers/qe/qe.c | 2 +- 3 files changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c index a31c4d9..95875d3 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c @@ -99,7 +99,7 @@ int ppa_init(void) cnt = DIV_ROUND_UP(fdt_header_len, 512); debug("%s: MMC read PPA FIT header: dev # %u, block # %u, count %u\n", __func__, dev, blk, cnt); - ret = mmc->block_dev.block_read(&mmc->block_dev, blk, cnt, fitp); + ret = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, fitp); if (ret != cnt) { free(fitp); printf("MMC/SD read of PPA FIT header at offset 0x%x failed\n", @@ -149,8 +149,7 @@ int ppa_init(void) cnt = DIV_ROUND_UP(fw_length, 512); debug("%s: MMC read PPA FIT image: dev # %u, block # %u, count %u\n", __func__, dev, blk, cnt); - ret = mmc->block_dev.block_read(&mmc->block_dev, - blk, cnt, ppa_fit_addr); + ret = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, ppa_fit_addr); if (ret != cnt) { free(ppa_fit_addr); printf("MMC/SD read of PPA FIT header at offset 0x%x failed\n", diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c index 3327073..c5cf188 100644 --- a/drivers/net/fm/fm.c +++ b/drivers/net/fm/fm.c @@ -402,7 +402,7 @@ int fm_init_common(int index, struct ccsr_fman *reg) printf("\nMMC read: dev # %u, block # %u, count %u ...\n", dev, blk, cnt); mmc_init(mmc); - (void)mmc->block_dev.block_read(&mmc->block_dev, blk, cnt, + (void)blk_dread(mmc_get_blk_desc(mmc), blk, cnt, addr); } #elif defined(CONFIG_SYS_QE_FMAN_FW_IN_REMOTE) diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index 7654df8..7010bbc 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -218,7 +218,7 @@ void u_qe_init(void) printf("\nMMC read: dev # %u, block # %u, count %u ...\n", dev, blk, cnt); mmc_init(mmc); - (void)mmc->block_dev.block_read(&mmc->block_dev, blk, cnt, + (void)blk_dread(mmc_get_blk_desc(mmc), blk, cnt, addr); } #endif -- 1.7.1

2 11

[U-Boot] [PATCH V3 1/3] efi_loader: simplify ifdefs
by Stephen Warren 30 Aug '18

30 Aug '18

From: Stephen Warren <swarren(a)nvidia.com> Use CONFIG_IS_ENABLED(EFI_LOADER) to avoid explicitly checking CONFIG_SPL too. This simplifies the conditional. Signed-off-by: Stephen Warren <swarren(a)nvidia.com> --- v3: New patch. --- arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 2 +- arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 2 +- arch/x86/lib/e820.c | 4 ++-- include/efi_loader.h | 6 +++--- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index 052e0708d454..be00bd55ab68 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -835,7 +835,7 @@ int dram_init_banksize(void) return 0; } -#if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_SPL_BUILD) +#if CONFIG_IS_ENABLED(EFI_LOADER) void efi_add_known_memory(void) { int i; diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c index fc9de73bcef4..c9c2c3f6d3e8 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c @@ -135,7 +135,7 @@ remove_psci_node: fdt_add_mem_rsv(blob, (uintptr_t)&secondary_boot_code, *boot_code_size); -#if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_SPL_BUILD) +#if CONFIG_IS_ENABLED(EFI_LOADER) efi_add_memory_map((uintptr_t)&secondary_boot_code, ALIGN(*boot_code_size, EFI_PAGE_SIZE) >> EFI_PAGE_SHIFT, EFI_RESERVED_MEMORY_TYPE, false); diff --git a/arch/x86/lib/e820.c b/arch/x86/lib/e820.c index 8b34f677d96d..d6ae2c4e9d77 100644 --- a/arch/x86/lib/e820.c +++ b/arch/x86/lib/e820.c @@ -36,7 +36,7 @@ __weak unsigned int install_e820_map(unsigned int max_entries, return 4; } -#if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_SPL_BUILD) +#if CONFIG_IS_ENABLED(EFI_LOADER) void efi_add_known_memory(void) { struct e820_entry e820[E820MAX]; @@ -72,4 +72,4 @@ void efi_add_known_memory(void) efi_add_memory_map(start, pages, type, false); } } -#endif /* defined(EFI_LOADER) && !defined(CONFIG_SPL_BUILD) */ +#endif /* CONFIG_IS_ENABLED(EFI_LOADER) */ diff --git a/include/efi_loader.h b/include/efi_loader.h index f162adfff7e2..b46babf9316f 100644 --- a/include/efi_loader.h +++ b/include/efi_loader.h @@ -13,7 +13,7 @@ #include <efi_api.h> /* No need for efi loader support in SPL */ -#if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_SPL_BUILD) +#if CONFIG_IS_ENABLED(EFI_LOADER) #include <linux/list.h> @@ -460,7 +460,7 @@ efi_status_t EFIAPI efi_set_variable(u16 *variable_name, efi_guid_t *vendor, void *efi_bootmgr_load(struct efi_device_path **device_path, struct efi_device_path **file_path); -#else /* defined(EFI_LOADER) && !defined(CONFIG_SPL_BUILD) */ +#else /* CONFIG_IS_ENABLED(EFI_LOADER) */ /* Without CONFIG_EFI_LOADER we don't have a runtime section, stub it out */ #define __efi_runtime_data @@ -477,6 +477,6 @@ static inline void efi_set_bootdev(const char *dev, const char *devnr, static inline void efi_net_set_dhcp_ack(void *pkt, int len) { } static inline void efi_print_image_infos(void *pc) { } -#endif /* CONFIG_EFI_LOADER && !CONFIG_SPL_BUILD */ +#endif /* CONFIG_IS_ENABLED(EFI_LOADER) */ #endif /* _EFI_LOADER_H */ -- 2.18.0

1 2

[U-Boot] [PULL] u-boot-sh/master
by Marek Vasut 30 Aug '18

30 Aug '18

The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437: configs: am57xx: change default board name to beagle_x15 (2018-08-26 12:26:16 -0400) are available in the Git repository at: git://git.denx.de/u-boot-sh.git master for you to fetch changes up to 65186977ee06e0df9a9524fa4b6689af4efecac1: mmc: renesas-sdhi: Use priv directly (2018-08-30 15:32:59 +0200) ---------------------------------------------------------------- Marek Vasut (2): pci: rmobile: Filter out device 1 and 2 mmc: renesas-sdhi: Use priv directly drivers/mmc/renesas-sdhi.c | 2 +- drivers/pci/pci-rcar-gen2.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)

2 1

[U-Boot] [PULL] u-boot-usb/master
by Marek Vasut 30 Aug '18

30 Aug '18

The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437: configs: am57xx: change default board name to beagle_x15 (2018-08-26 12:26:16 -0400) are available in the Git repository at: git://git.denx.de/u-boot-usb.git master for you to fetch changes up to 88c34b8da62cfb4188ff9a59acb32f88ce9ed1b0: usb: dwc2: Add reset ctrl to driver (2018-08-29 03:10:30 +0200) ---------------------------------------------------------------- Ley Foon Tan (1): usb: dwc2: Add reset ctrl to driver Marek Vasut (3): phy: Fix warning due to missing definition of structure usb: ehci: Make the PHY handling generic usb: ehci: Add PHY support to ehci-pci drivers/usb/host/dwc2.c | 37 +++++++++++++++++++++++++++++++++++++ drivers/usb/host/ehci-generic.c | 56 +++----------------------------------------------------- drivers/usb/host/ehci-hcd.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/usb/host/ehci-pci.c | 31 +++++++++++++++++++++++++++---- drivers/usb/host/ehci.h | 5 +++++ include/generic-phy.h | 1 + 6 files changed, 139 insertions(+), 57 deletions(-)

2 1

[U-Boot] Please pull u-boot-x86
by Bin Meng 30 Aug '18

30 Aug '18

Hi Tom, This includes a small x86 efi payload enhancement to support booting Linux, as well as a clean up on kernel boot protocol setup parameters to match upstream and avoid confusion. The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437: configs: am57xx: change default board name to beagle_x15 (2018-08-26 12:26:16 -0400) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to e69cc6bc42c37598e2fdda421360be6cbc0470fd: x86: zimage: Remove acpi_rsdp_addr propagation to kernel boot parameters (2018-08-30 11:23:15 +0800) ---------------------------------------------------------------- Bin Meng (5): x86: efi: payload: Install E820 map from EFI memory map efi: stub: Pass EFI system table address to U-Boot payload x86: zimage: Support booting Linux kernel from an EFI payload x86: efi: payload: Turn on acpi in the kernel command line x86: zimage: Remove acpi_rsdp_addr propagation to kernel boot parameters arch/x86/cpu/efi/payload.c | 119 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/x86/include/asm/bootparam.h | 1 - arch/x86/include/asm/zimage.h | 1 + arch/x86/lib/zimage.c | 9 ++++----- include/configs/x86-common.h | 2 +- include/efi.h | 13 +++++++++++++ lib/efi/efi_stub.c | 4 ++++ 7 files changed, 142 insertions(+), 7 deletions(-) Regards, Bin

2 1

[U-Boot] [PATCH V2 1/2] ARM: tegra: reserve unmapped RAM so EFI doesn't use it
by Stephen Warren 30 Aug '18

30 Aug '18

From: Stephen Warren <swarren(a)nvidia.com> Tegra U-Boot ensures that board_get_usable_ram_top() never returns a value over 4GB, since some peripherals can't access such addresses. However, on systems with more than 2GB of RAM, RAM bank 1 does describe this extra RAM, so that Linux (or whatever OS) can use it, subject to DMA limitations. Since board_get_usable_ram_top() points at the top of RAM bank 0, the memory locations describes by RAM bank 1 are not mapped by U-Boot's MMU configuration, and so cannot be used for anything. For some completely inexplicable reason, U-Boot's EFI support ignores the value returned by board_get_usable_ram_top(), and EFI memory allocation routines will return values above U-Boot's RAM top. This causes U-Boot to crash when it accesses that RAM, since it isn't mapped by the MMU. One use-case where this happens is TFTP download of a file on Jetson TX1 (p2371-2180). This change explicitly tells the EFI code that this extra RAM should not be used, thus avoiding the crash. A previous attempt to make EFI honor board_get_usable_ram_top() was rejected. So, this patch will need to be replicated for any board that implements board_get_usable_ram_top(). Fixes: aa909462d018 ("efi_loader: efi_allocate_pages is too restrictive") Signed-off-by: Stephen Warren <swarren(a)nvidia.com> --- v2: - Don't hard-code EFI page size. - Register RAM as a boot services data rather than reserved. --- arch/arm/mach-tegra/board2.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c index 421a71b3014d..f893966140a1 100644 --- a/arch/arm/mach-tegra/board2.c +++ b/arch/arm/mach-tegra/board2.c @@ -6,6 +6,7 @@ #include <common.h> #include <dm.h> +#include <efi_loader.h> #include <errno.h> #include <ns16550.h> #include <usb.h> @@ -210,6 +211,19 @@ int board_early_init_f(void) int board_late_init(void) { +#ifdef CONFIG_EFI_LOADER + if (gd->bd->bi_dram[1].start) { + /* + * Only bank 0 is below board_get_usable_ram_top(), so all of + * bank 1 is not mapped by the U-Boot MMU configuration, and so + * we must prevent EFI from using it. + */ + efi_add_memory_map(gd->bd->bi_dram[1].start, + gd->bd->bi_dram[1].size / EFI_PAGE_SIZE, + EFI_BOOT_SERVICES_DATA, false); + } +#endif + #if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE) if (tegra_cpu_is_non_secure()) { printf("CPU is in NS mode\n"); -- 2.18.0

3 5

[U-Boot] [PATCH 01/11] sh: sh7723: ap325rxa: Drop duplicate HIZCRB macro
by Marek Vasut 30 Aug '18

30 Aug '18

Drop the macro as it is defined in sh7723.h already. Signed-off-by: Marek Vasut <marek.vasut+renesas(a)gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu(a)nigauri.org> --- board/renesas/ap325rxa/cpld-ap325rxa.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/board/renesas/ap325rxa/cpld-ap325rxa.c b/board/renesas/ap325rxa/cpld-ap325rxa.c index 16fadcbca7..5d9dc9387e 100644 --- a/board/renesas/ap325rxa/cpld-ap325rxa.c +++ b/board/renesas/ap325rxa/cpld-ap325rxa.c @@ -61,8 +61,6 @@ #define CPLD_DONE_ADR ((vu_char *)0xA4050132) #define CPLD_DONE_DAT 0x20 -#define HIZCRB ((vu_short *)0xA405015A) - /* data */ #define CPLD_NOMAL_START 0xA0A80000 #define CPLD_SAFE_START 0xA0AC0000 @@ -191,7 +189,7 @@ void init_cpld(void) if (*CPLD_DONE_ADR & CPLD_DONE_DAT) /* Already DONE */ return; - *HIZCRB = 0x0000; + *((vu_short *)HIZCRB) = 0x0000; *CPLD_PFC_ADR = 0x7c00; /* FPGA PROG = OUTPUT */ /* write CPLD data from NOR flash to device */ -- 2.18.0

1 10

[U-Boot] [PATCH] mmc: renesas-sdhi: Use priv directly
by Marek Vasut 30 Aug '18

30 Aug '18

The dev_get_priv(dev) is used twice in the probe function. Replace the second invocation with priv variable. Signed-off-by: Marek Vasut <marek.vasut+renesas(a)gmail.com> Cc: Masahiro Yamada <yamada.masahiro(a)socionext.com> Cc: Nobuhiro Iwamatsu <iwamatsu(a)nigauri.org> --- drivers/mmc/renesas-sdhi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/renesas-sdhi.c b/drivers/mmc/renesas-sdhi.c index ecdb088ac4..f8dc5f57ce 100644 --- a/drivers/mmc/renesas-sdhi.c +++ b/drivers/mmc/renesas-sdhi.c @@ -374,7 +374,7 @@ static int renesas_sdhi_probe(struct udevice *dev) ret = tmio_sd_probe(dev, quirks); #if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) if (!ret) - renesas_sdhi_reset_tuning(dev_get_priv(dev)); + renesas_sdhi_reset_tuning(priv); #endif return ret; } -- 2.18.0

1 0

[U-Boot] [PATCH] rockchip: dts: fix unnecessary '-cells' warning
by Kever Yang 30 Aug '18

30 Aug '18

Fix warning below: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Kever Yang <kever.yang(a)rock-chips.com> --- arch/arm/dts/rk3288-evb.dtsi | 2 -- arch/arm/dts/rk3288-firefly.dtsi | 2 -- arch/arm/dts/rk3288-tinker.dtsi | 2 -- arch/arm/dts/rk3288-veyron.dtsi | 2 -- arch/arm/dts/rk3288.dtsi | 2 -- arch/arm/dts/rk3328.dtsi | 2 -- arch/arm/dts/rk3399-puma.dtsi | 2 -- arch/arm/dts/rk3399.dtsi | 4 ---- 8 files changed, 18 deletions(-) diff --git a/arch/arm/dts/rk3288-evb.dtsi b/arch/arm/dts/rk3288-evb.dtsi index 17c79d3c27..ce75bd5d28 100644 --- a/arch/arm/dts/rk3288-evb.dtsi +++ b/arch/arm/dts/rk3288-evb.dtsi @@ -19,8 +19,6 @@ keys: gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; button@0 { gpio-key,wakeup = <1>; diff --git a/arch/arm/dts/rk3288-firefly.dtsi b/arch/arm/dts/rk3288-firefly.dtsi index de5e8f2e8d..2239ab9f59 100644 --- a/arch/arm/dts/rk3288-firefly.dtsi +++ b/arch/arm/dts/rk3288-firefly.dtsi @@ -25,8 +25,6 @@ keys: gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; button@0 { gpio-key,wakeup = <1>; diff --git a/arch/arm/dts/rk3288-tinker.dtsi b/arch/arm/dts/rk3288-tinker.dtsi index a752458663..2f816af47f 100644 --- a/arch/arm/dts/rk3288-tinker.dtsi +++ b/arch/arm/dts/rk3288-tinker.dtsi @@ -55,8 +55,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; pinctrl-names = "default"; diff --git a/arch/arm/dts/rk3288-veyron.dtsi b/arch/arm/dts/rk3288-veyron.dtsi index 4b66f6be3c..92b68878fd 100644 --- a/arch/arm/dts/rk3288-veyron.dtsi +++ b/arch/arm/dts/rk3288-veyron.dtsi @@ -83,8 +83,6 @@ gpio_keys: gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pwr_key_h>; diff --git a/arch/arm/dts/rk3288.dtsi b/arch/arm/dts/rk3288.dtsi index 9f3f6f5051..273d38c84f 100644 --- a/arch/arm/dts/rk3288.dtsi +++ b/arch/arm/dts/rk3288.dtsi @@ -841,8 +841,6 @@ #size-cells = <0>; status = "disabled"; ports { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; mipi_in: port { #address-cells = <1>; diff --git a/arch/arm/dts/rk3328.dtsi b/arch/arm/dts/rk3328.dtsi index 82c3717fba..4ec5d3e1f3 100644 --- a/arch/arm/dts/rk3328.dtsi +++ b/arch/arm/dts/rk3328.dtsi @@ -189,8 +189,6 @@ u-boot,dm-pre-reloc; compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd"; reg = <0x0 0xff100000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; io_domains: io-domains { compatible = "rockchip,rk3328-io-voltage-domain"; diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi index 35840319ff..6e7e1e3528 100644 --- a/arch/arm/dts/rk3399-puma.dtsi +++ b/arch/arm/dts/rk3399-puma.dtsi @@ -208,8 +208,6 @@ }; &hdmi { - #address-cells = <1>; - #size-cells = <0>; #sound-dai-cells = <0>; status = "okay"; }; diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi index 83c257b122..a55a6c6eb9 100644 --- a/arch/arm/dts/rk3399.dtsi +++ b/arch/arm/dts/rk3399.dtsi @@ -1015,8 +1015,6 @@ u-boot,dm-pre-reloc; compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd"; reg = <0x0 0xff320000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; pmu_io_domains: io-domains { compatible = "rockchip,rk3399-pmu-io-voltage-domain"; @@ -1493,8 +1491,6 @@ #size-cells = <0>; status = "disabled"; ports { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; mipi_in: port { #address-cells = <1>; -- 2.18.0

3 3

[U-Boot] [PATCH 00/15] efi_loader: EFI_UNICODE_COLLATION_PROTOCOL
by Heinrich Schuchardt 30 Aug '18

30 Aug '18

This patchset implements the EFI_UNICODE_COLLATION_PROTOCOL and provides unit tests. Additionally some errors when handling Unicode strings are fixed. * possible stack overflow * incorrect handling of precision attribute in printf() * incorrect limit on variable length Some old Unicode functions are replaced. An error in Unicode handling in the FAT file system shall be fixed after merging Takahiro's FAT patches. Until then some redundancy between old and new Unicode functions remains. Heinrich Schuchardt (15): lib: build charset.o only if needed efi_loader: rename utf16_strlen, utf16_strnlen lib: charset: utility functions for Unicode test: unit tests for Unicode functions lib: vsprintf: correct printing of Unicode strings test: test printing Unicode efi_loader: remove limit on variable length efi_loader: don't use unlimited stack as buffer efi_loader: buffer size for load options lib: charset: remove obsolete functions efi_loader: capitalization table lib: charset: upper/lower case conversion test: tests for utf_to_lower() utf_to_upper(). efi_loader: EFI_UNICODE_COLLATION_PROTOCOL efi_selftest: EFI_UNICODE_COLLATION_PROTOCOL MAINTAINERS | 4 + cmd/bootefi.c | 6 +- include/capitalization.h | 1909 +++++++++++++++++ include/charset.h | 181 +- include/cp1250.h | 40 + include/cp437.h | 40 + include/efi_api.h | 21 + include/efi_loader.h | 5 + include/test/suites.h | 3 +- lib/Makefile | 5 + lib/charset.c | 359 +++- lib/efi_loader/Makefile | 18 +- lib/efi_loader/efi_bootmgr.c | 2 +- lib/efi_loader/efi_boottime.c | 6 + lib/efi_loader/efi_console.c | 20 +- lib/efi_loader/efi_file.c | 2 +- lib/efi_loader/efi_unicode_collation.c | 218 ++ lib/efi_loader/efi_variable.c | 52 +- lib/efi_selftest/Makefile | 1 + .../efi_selftest_unicode_collation.c | 257 +++ lib/vsprintf.c | 34 +- test/Kconfig | 8 + test/Makefile | 1 + test/cmd_ut.c | 14 +- test/unicode_ut.c | 545 +++++ 25 files changed, 3587 insertions(+), 164 deletions(-) create mode 100644 include/capitalization.h create mode 100644 include/cp1250.h create mode 100644 include/cp437.h create mode 100644 lib/efi_loader/efi_unicode_collation.c create mode 100644 lib/efi_selftest/efi_selftest_unicode_collation.c create mode 100644 test/unicode_ut.c -- 2.18.0

4 43