August 2018 - U-Boot

[U-Boot] [PATCH] spl: Kconfig: Fix typo in 'Upgrade'
by Fabio Estevam 31 Aug '18

31 Aug '18

From: Fabio Estevam <fabio.estevam(a)nxp.com> Correct the spelling of 'Upgrade'. Signed-off-by: Fabio Estevam <fabio.estevam(a)nxp.com> --- common/spl/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/common/spl/Kconfig b/common/spl/Kconfig index b44b741..2e79d7d 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -738,12 +738,12 @@ config SPL_USB_ETHER See also SPL_NET_SUPPORT and SPL_ETH_SUPPORT. config SPL_DFU_SUPPORT - bool "Support DFU (Device Firmware Upgarde)" + bool "Support DFU (Device Firmware Upgrade)" select SPL_HASH_SUPPORT select SPL_DFU_NO_RESET depends on SPL_RAM_SUPPORT help - This feature enables the DFU (Device Firmware Upgarde) in SPL with + This feature enables the DFU (Device Firmware Upgrade) in SPL with RAM memory device support. The ROM code will load and execute the SPL built with dfu. The user can load binaries (u-boot/kernel) to selected device partition from host-pc using dfu-utils. -- 2.7.4

2 1

[U-Boot] [PATCH] Make kmalloc'ed memory really DMA-safe
by Masahiro Yamada 31 Aug '18

31 Aug '18

In Linux, the memory returned by kmalloc() is DMA-capable. However, it is not true in U-Boot. At a glance, kmalloc() in U-Boot returns address aligned with ARCH_DMA_MINALIGN. However, it never pads the allocated memory. This half-way house is completely useless because calling kmalloc() and malloc() in this order causes a cache sharing problem. Change the implementation to call malloc_cache_aligned(), which allocates really DMA-capable memory. Signed-off-by: Masahiro Yamada <yamada.masahiro(a)socionext.com> --- lib/linux_compat.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/lib/linux_compat.c b/lib/linux_compat.c index a936a7e..6373b44 100644 --- a/lib/linux_compat.c +++ b/lib/linux_compat.c @@ -1,5 +1,6 @@ #include <common.h> +#include <memalign.h> #include <linux/compat.h> struct p_current cur = { @@ -18,7 +19,7 @@ void *kmalloc(size_t size, int flags) { void *p; - p = memalign(ARCH_DMA_MINALIGN, size); + p = malloc_cache_aligned(size); if (flags & __GFP_ZERO) memset(p, 0, size); @@ -37,5 +38,5 @@ struct kmem_cache *get_mem(int element_sz) void *kmem_cache_alloc(struct kmem_cache *obj, int flag) { - return memalign(ARCH_DMA_MINALIGN, obj->sz); + return malloc_cache_aligned(obj->sz); } -- 2.7.4

2 1

[U-Boot] [PATCH 1/1] test: fix typo in cmd_ut_category() description
by Heinrich Schuchardt 31 Aug '18

31 Aug '18

argc = 1: all tests are run argc > 1: only argv[1] is run So we need argc >= 1. Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- include/test/suites.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/test/suites.h b/include/test/suites.h index 8e4eac60eb..abb3a4b816 100644 --- a/include/test/suites.h +++ b/include/test/suites.h @@ -15,7 +15,7 @@ struct unit_test; * @name: Category name * @tests: List of tests to run * @n_ents: Number of tests in @tests - * @argc: Argument count provided. Must be <= 1. If this is 1 then all + * @argc: Argument count provided. Must be >= 1. If this is 1 then all * tests are run, otherwise only the one named @argv[1] is run. * @argv: Arguments: argv[1] is the test to run (if @argc >= 2) * @return 0 if OK, CMD_RET_FAILURE on failure -- 2.18.0

3 2

[U-Boot] [PATCH 0/1] Update instructions for HiSilicon HiKey board
by Manivannan Sadhasivam 31 Aug '18

31 Aug '18

Update the board instructions for the HiSilicon HiKey development board based on the latest source available at 96Boards repositories. These instructions are tested on the Lemaker HiKey board. Thanks, Mani Manivannan Sadhasivam (1): hisilicon: hikey: Update instructions based on latest source board/hisilicon/hikey/README | 259 +++++++++++++++-------------------- 1 file changed, 113 insertions(+), 146 deletions(-) -- 2.17.1

2 2

[U-Boot] u-boot release and feature set
by Prabhakar Kushwaha 31 Aug '18

31 Aug '18

Hi Tom, Every u-boot release announcement has a very high level feature set. I am wondering, if you also maintain detailed feature list per u-boot release? I can see "Statistics" details per release from https://www.denx.de/wiki/U-Boot/ReleaseCycle but not the feature set. May be I am looking at wrong place ☹ Regards, Prabhakar

3 8

[U-Boot] [PATCH] wandboard: README: Include the mx6qp variant in the list
by Fabio Estevam 31 Aug '18

31 Aug '18

From: Fabio Estevam <fabio.estevam(a)nxp.com> The mx6qp Wandboard variant is also supported, so add it to the list. Signed-off-by: Fabio Estevam <fabio.estevam(a)nxp.com> --- board/wandboard/README | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/wandboard/README b/board/wandboard/README index 6345416..e5170bc 100644 --- a/board/wandboard/README +++ b/board/wandboard/README @@ -4,7 +4,7 @@ U-Boot for Wandboard This file contains information for the port of U-Boot to the Wandboard. Wandboard is a development board that has three variants based on the following -SoCs: mx6 quad, mx6 dual lite and mx6 solo. +SoCs: mx6 quad, mx6 quad plus, mx6 dual lite and mx6 solo. For more details about Wandboard, please refer to: http://www.wandboard.org/ -- 2.7.4

1 0

[U-Boot] [PATCH 0/2] Add Rock960 board support
by Manivannan Sadhasivam 31 Aug '18

31 Aug '18

This patchset adds board support for Vamrs Limited Rock960, which is one of the 96Boards Consumer Edition platform based on Rockchip RK3399 SoC. On this board, U-Boot will be loaded by ATF as a BL33 image which in turn loads Linux kernel from eMMC or SD card. Instructions for building and flashing the images are specified in board README.md file. More information about this board can be found in 96Boards product page: https://www.96boards.org/product/rock960/ The board support includes only the necessary interfaces required to boot Linux kernel. Thanks, Mani Manivannan Sadhasivam (2): arm: dts: Add Rock960 devicetree support board: Add Vamrs Limited Rock960 board support arch/arm/dts/rk3399-rock960.dts | 348 ++++++++++++++++++++ arch/arm/mach-rockchip/rk3399/Kconfig | 16 + board/vamrs/rock960_rk3399/Kconfig | 15 + board/vamrs/rock960_rk3399/MAINTAINERS | 6 + board/vamrs/rock960_rk3399/Makefile | 6 + board/vamrs/rock960_rk3399/README | 79 +++++ board/vamrs/rock960_rk3399/rock960-rk3399.c | 50 +++ configs/rock960-rk3399_defconfig | 62 ++++ include/configs/rock960_rk3399.h | 15 + 9 files changed, 597 insertions(+) create mode 100644 arch/arm/dts/rk3399-rock960.dts create mode 100644 board/vamrs/rock960_rk3399/Kconfig create mode 100644 board/vamrs/rock960_rk3399/MAINTAINERS create mode 100644 board/vamrs/rock960_rk3399/Makefile create mode 100644 board/vamrs/rock960_rk3399/README create mode 100644 board/vamrs/rock960_rk3399/rock960-rk3399.c create mode 100644 configs/rock960-rk3399_defconfig create mode 100644 include/configs/rock960_rk3399.h -- 2.17.1

3 13

[U-Boot] [PATCH v3 00/58] clk: Add Allwinner CLK, RESET support
by Jagan Teki 31 Aug '18

31 Aug '18

This series is refined version of Allwinner CLK, RESET support for previous RFC[3] which implements CLK and RESET for - USB - MMC - SPI - UART - Ethernet This series depends on 'musb shutdown' series [1] and Linux dts(i) sync series [2]. Since this series supporting MMC, the previous version[4] DM_MMC migration changes are squashed and droped reset and clock ccm hacks. Tested on A64, H3, H5, H6, R40, A83T, A20. Changes for v3: - Added H6 CLK, RESET changes - Added fastboot mmc device patch - Added fat env mmc device patch - Update bootorder to check eMMC as per DT - Collect Tested-by Changes for v2: - Fixed few warnings and spaces in reset descriptor table. - Add Ethernet CLK and RESET changes All these changes available at u-boot-sunxi/clk Note: - V3S, A23, A33 still need to test. Any inputs, Jagan. Jagan Teki (58): clk: Add Allwinner A64 CLK driver reset: Add default request ops reset: Add Allwinner RESET driver clk: sunxi: Add Allwinner H3/H5 CLK driver clk: sunxi: Add Allwinner A10/A20 CLK driver clk: sunxi: Add Allwinner A10s/A13 CLK driver clk: sunxi: Add Allwinner A31 CLK driver clk: sunxi: Add Allwinner A23 CLK driver clk: sunxi: a23: Add CLK support for A33 clk: sunxi: Add Allwinner A83T CLK driver clk: sunxi: Add Allwinner R40 CLK driver clk: sunxi: Add Allwinner V3S CLK driver sunxi: Enable CLK musb-new: sunxi: Use CLK and RESET support phy: sun4i-usb: Use CLK and RESET support sunxi: usb: Switch to Generic host controllers usb: host: Drop [e-o]hci-sunxi drivers clk: sunxi: Implement AHB bus MMC clocks clk: sunxi: Implement direct MMC clocks clk: sunxi: Implement AHB bus MMC resets reset: Add get reset by name optionally reset: Add reset valid clk: sunxi: Add Allwinner H6 CLK, RESET driver arm64: allwinner: dts: h6: fix Pine H64 MMC bus width sunxi: h6: Enable CLK, RESET dm: mmc: sunxi: Add CLK and RESET support fastboot: sunxi: Update fastboot mmc default device env: fat: Add func to get fat device, partition sunxi: Get fat device wrt boot device, 'auto' partition env: sunxi: Don't update fat dev, part wrt MMC_SUNXI_SLOT_EXTRA sunxi: Add mmc 2, 3 bootenv devices sunxi: A20: Enable DM_MMC mmc: sunxi: Add mmc, emmc H5/A64 compatible sunxi: H3_H5: Enable DM_MMC sunxi: A64: Enable DM_MMC mmc: sunxi: Add A83T emmc compatible sunxi: A83T: Enable DM_MMC sunxi: V40: Enable DM_MMC sunxi: H6: Enable DM_MMC sunxi: A13/A31: Enable DM_MMC sunxi: A23/A33/V3S: Enable DM_MMC clk: sunxi: Implement SPI clocks clk: sunxi: Implement SPI resets spi: sun4i: Add CLK support spi: Add Allwinner A31 SPI driver clk: sunxi: Implement UART clocks clk: sunxi: Implement UART resets clk: sunxi: Implement Ethernet clocks clk: sunxi: Implement Ethernet resets net: sunxi_emac: Add CLK support net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle net: sun8i_emac: Add CLK and RESET support clk: Get the CLK by index without device clk: Use clk_get_by_index_tail() reset: Get the RESET by index without device clk: sunxi: h3: Implement EPHY CLK and RESET net: sun8i_emac: Add EPHY CLK and RESET support board: sunxi: gmac: Remove Ethernet clock and reset arch/arm/dts/sun50i-h6-pine-h64.dts | 2 + arch/arm/include/asm/arch-sunxi/ccu.h | 82 +++ arch/arm/mach-sunxi/Kconfig | 24 + arch/arm/mach-sunxi/board.c | 50 ++ board/sunxi/gmac.c | 8 - configs/A10-OLinuXino-Lime_defconfig | 1 + configs/A10s-OLinuXino-M_defconfig | 1 + configs/A13-OLinuXinoM_defconfig | 1 + configs/A13-OLinuXino_defconfig | 1 + configs/A20-OLinuXino-Lime2-eMMC_defconfig | 2 + configs/A20-OLinuXino-Lime2_defconfig | 1 + configs/A20-OLinuXino-Lime_defconfig | 1 + configs/A20-Olimex-SOM204-EVB-eMMC_defconfig | 1 + configs/A20-Olimex-SOM204-EVB_defconfig | 2 + configs/Auxtek-T003_defconfig | 1 + configs/Auxtek-T004_defconfig | 1 + configs/Bananapi_defconfig | 1 + configs/Bananapi_m2m_defconfig | 1 + configs/Bananapro_defconfig | 1 + configs/CHIP_defconfig | 1 + configs/CHIP_pro_defconfig | 1 + configs/CSQ_CS908_defconfig | 1 + configs/Colombus_defconfig | 1 + configs/Cubieboard2_defconfig | 1 + configs/Cubieboard_defconfig | 1 + configs/Cubietruck_plus_defconfig | 1 + configs/Hummingbird_A31_defconfig | 1 + configs/Itead_Ibox_A20_defconfig | 1 + configs/Linksprite_pcDuino3_Nano_defconfig | 1 + configs/Linksprite_pcDuino3_defconfig | 1 + configs/Linksprite_pcDuino_defconfig | 1 + configs/MK808C_defconfig | 1 + configs/Marsboard_A10_defconfig | 1 + configs/Mele_A1000G_quad_defconfig | 1 + configs/Mele_A1000_defconfig | 1 + configs/Mele_I7_defconfig | 1 + configs/Mele_M3_defconfig | 1 + configs/Mele_M5_defconfig | 1 + configs/Mele_M9_defconfig | 1 + configs/Mini-X_defconfig | 1 + configs/Orangepi_defconfig | 1 + configs/Orangepi_mini_defconfig | 1 + configs/Sinlinx_SinA31s_defconfig | 1 + configs/Sinlinx_SinA33_defconfig | 2 + configs/Sinovoip_BPI_M2_Plus_defconfig | 1 + configs/Sinovoip_BPI_M2_defconfig | 1 + configs/Sinovoip_BPI_M3_defconfig | 1 + configs/Wexler_TAB7200_defconfig | 1 + configs/Wobo_i5_defconfig | 1 + configs/a64-olinuxino_defconfig | 1 + configs/amarula_a64_relic_defconfig | 1 + configs/ba10_tv_box_defconfig | 1 + configs/bananapi_m1_plus_defconfig | 1 + configs/bananapi_m64_defconfig | 1 + configs/ga10h_v1_1_defconfig | 1 + configs/h8_homlet_v2_defconfig | 1 + configs/i12-tvbox_defconfig | 1 + configs/icnova-a20-swac_defconfig | 1 + configs/inet1_defconfig | 1 + configs/inet_q972_defconfig | 1 + configs/jesurun_q5_defconfig | 1 + configs/libretech_all_h3_cc_h2_plus_defconfig | 1 + configs/libretech_all_h3_cc_h3_defconfig | 1 + configs/libretech_all_h3_cc_h5_defconfig | 1 + configs/mixtile_loftq_defconfig | 1 + configs/mk802_a10s_defconfig | 1 + configs/mk802_defconfig | 1 + configs/mk802ii_defconfig | 1 + configs/nanopi_a64_defconfig | 1 + configs/nanopi_m1_defconfig | 1 + configs/nanopi_m1_plus_defconfig | 1 + configs/nanopi_neo2_defconfig | 1 + configs/nanopi_neo_air_defconfig | 1 + configs/nanopi_neo_defconfig | 1 + configs/nanopi_neo_plus2_defconfig | 1 + configs/orangepi_2_defconfig | 1 + configs/orangepi_lite_defconfig | 1 + configs/orangepi_one_defconfig | 1 + configs/orangepi_pc2_defconfig | 1 + configs/orangepi_pc_defconfig | 1 + configs/orangepi_pc_plus_defconfig | 1 + configs/orangepi_plus2e_defconfig | 1 + configs/orangepi_plus_defconfig | 1 + configs/orangepi_prime_defconfig | 1 + configs/orangepi_r1_defconfig | 1 + configs/orangepi_win_defconfig | 1 + configs/orangepi_zero_defconfig | 1 + configs/orangepi_zero_plus2_defconfig | 1 + configs/orangepi_zero_plus_defconfig | 1 + configs/parrot_r16_defconfig | 2 + configs/pine64_plus_defconfig | 1 + configs/r7-tv-dongle_defconfig | 1 + configs/sopine_baseboard_defconfig | 1 + configs/sun8i_a23_evb_defconfig | 1 + configs/sunxi_Gemei_G9_defconfig | 1 + configs/tbs_a711_defconfig | 1 + drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 1 + drivers/clk/clk-uclass.c | 84 +++- drivers/clk/sunxi/Kconfig | 82 +++ drivers/clk/sunxi/Makefile | 18 + drivers/clk/sunxi/clk_a10.c | 107 ++++ drivers/clk/sunxi/clk_a10s.c | 96 ++++ drivers/clk/sunxi/clk_a23.c | 105 ++++ drivers/clk/sunxi/clk_a31.c | 128 +++++ drivers/clk/sunxi/clk_a64.c | 115 +++++ drivers/clk/sunxi/clk_a83t.c | 105 ++++ drivers/clk/sunxi/clk_h3.c | 130 +++++ drivers/clk/sunxi/clk_h6.c | 73 +++ drivers/clk/sunxi/clk_r40.c | 123 +++++ drivers/clk/sunxi/clk_sunxi.c | 77 +++ drivers/clk/sunxi/clk_v3s.c | 91 ++++ drivers/fastboot/Kconfig | 3 +- drivers/mmc/sunxi_mmc.c | 121 +++-- drivers/net/sun8i_emac.c | 179 ++++--- drivers/net/sunxi_emac.c | 28 +- drivers/phy/allwinner/phy-sun4i-usb.c | 77 ++- drivers/reset/Kconfig | 8 + drivers/reset/Makefile | 1 + drivers/reset/reset-sunxi.c | 124 +++++ drivers/reset/reset-uclass.c | 81 ++- drivers/spi/Kconfig | 6 + drivers/spi/Makefile | 1 + drivers/spi/sun4i_spi.c | 40 +- drivers/spi/sun6i_spi.c | 475 ++++++++++++++++++ drivers/usb/host/Kconfig | 2 + drivers/usb/host/Makefile | 2 - drivers/usb/host/ehci-sunxi.c | 204 -------- drivers/usb/host/ohci-sunxi.c | 233 --------- drivers/usb/musb-new/sunxi.c | 82 +-- env/Kconfig | 3 +- env/fat.c | 9 +- include/clk.h | 15 + include/configs/sun4i.h | 4 - include/configs/sun50i.h | 5 - include/configs/sun5i.h | 4 - include/configs/sun6i.h | 4 - include/configs/sun7i.h | 4 - include/configs/sun8i.h | 4 - include/configs/sunxi-common.h | 9 +- include/fat.h | 1 + include/reset.h | 52 ++ scripts/config_whitelist.txt | 2 - 143 files changed, 2695 insertions(+), 685 deletions(-) create mode 100644 arch/arm/include/asm/arch-sunxi/ccu.h create mode 100644 drivers/clk/sunxi/Kconfig create mode 100644 drivers/clk/sunxi/Makefile create mode 100644 drivers/clk/sunxi/clk_a10.c create mode 100644 drivers/clk/sunxi/clk_a10s.c create mode 100644 drivers/clk/sunxi/clk_a23.c create mode 100644 drivers/clk/sunxi/clk_a31.c create mode 100644 drivers/clk/sunxi/clk_a64.c create mode 100644 drivers/clk/sunxi/clk_a83t.c create mode 100644 drivers/clk/sunxi/clk_h3.c create mode 100644 drivers/clk/sunxi/clk_h6.c create mode 100644 drivers/clk/sunxi/clk_r40.c create mode 100644 drivers/clk/sunxi/clk_sunxi.c create mode 100644 drivers/clk/sunxi/clk_v3s.c create mode 100644 drivers/reset/reset-sunxi.c create mode 100644 drivers/spi/sun6i_spi.c delete mode 100644 drivers/usb/host/ehci-sunxi.c delete mode 100644 drivers/usb/host/ohci-sunxi.c -- 2.18.0.321.gffc6fa0e3

4 86

[U-Boot] [PATCH] imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig
by Stefano Babic 31 Aug '18

31 Aug '18

CONFIG_CMD_MII is set without CONFIG_MII, build is broken. Signed-off-by: Stefano Babic <sbabic(a)denx.de> --- configs/mx7dsabresd_qspi_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/configs/mx7dsabresd_qspi_defconfig b/configs/mx7dsabresd_qspi_defconfig index a79880482f..53894e66f1 100644 --- a/configs/mx7dsabresd_qspi_defconfig +++ b/configs/mx7dsabresd_qspi_defconfig @@ -53,6 +53,7 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_BAR=y +CONFIG_MII=y CONFIG_PHYLIB=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX7=y -- 2.17.1

1 0

[U-Boot] [PATCH] mmc: dw_mmc: set host_caps mmc modes to equivalent buswidth and lower
by Jan Havran 31 Aug '18

31 Aug '18

dwmci_setup_cfg was clearing all modes except the mode equivalent to required bus width. Moreover, for buswidth = 1 was set the 4-bit mode. This sets host caps to all modes from 1-bit up to required mode. Signed-off-by: Jan Havran <havran.jan(a)email.cz> --- drivers/mmc/dw_mmc.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c index 13180fc0d6..8aa8362359 100644 --- a/drivers/mmc/dw_mmc.c +++ b/drivers/mmc/dw_mmc.c @@ -501,11 +501,13 @@ void dwmci_setup_cfg(struct mmc_config *cfg, struct dwmci_host *host, cfg->host_caps = host->caps; if (host->buswidth == 8) { - cfg->host_caps |= MMC_MODE_8BIT; - cfg->host_caps &= ~MMC_MODE_4BIT; - } else { - cfg->host_caps |= MMC_MODE_4BIT; + cfg->host_caps |= MMC_MODE_8BIT | MMC_MODE_4BIT | MMC_MODE_1BIT; + } else if (host->buswidth == 4) { cfg->host_caps &= ~MMC_MODE_8BIT; + cfg->host_caps |= MMC_MODE_4BIT | MMC_MODE_1BIT; + } else { + cfg->host_caps &= ~MMC_MODE_8BIT & ~MMC_MODE_4BIT; + cfg->host_caps |= MMC_MODE_1BIT; } cfg->host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz; -- 2.18.0

1 0