July 2018 - U-Boot

[U-Boot] [PATCH v12 1/3] Consolidating UDP header functions.
by DH＠synoia.com 11 Oct '18

11 Oct '18

From: Duncan Hare <DH(a)Synoia.com> To make it possible to add TCP versions of the same, while reusing IP portions. This patch should not change any behavior. All references to TCP removed Used most recent version of u-boot June 22 13, 2918 Series to fix patman errors over Licensing declaration END Series-notes TCP with Selective Acknowledgment (SACK) is currently the protocol with highest speed transfers, for fast multi-hop networks. END Signed-off-by: Duncan Hare <DH(a)Synoia.com> Signed-off-by: Duncan Hare <DuncanCHare(a)yahoo.com> --- include/net.h | 6 +++++- net/net.c | 34 ++++++++++++++++++++++++---------- net/ping.c | 7 +------ 3 files changed, 30 insertions(+), 17 deletions(-) diff --git a/include/net.h b/include/net.h index 5760685556..a54160fff6 100644 --- a/include/net.h +++ b/include/net.h @@ -593,7 +593,8 @@ int net_set_ether(uchar *xet, const uchar *dest_ethaddr, uint prot); int net_update_ether(struct ethernet_hdr *et, uchar *addr, uint prot); /* Set IP header */ -void net_set_ip_header(uchar *pkt, struct in_addr dest, struct in_addr source); +void net_set_ip_header(uchar *pkt, struct in_addr dest, struct in_addr source, + u16 pkt_len, u8 proto); void net_set_udp_header(uchar *pkt, struct in_addr dest, int dport, int sport, int len); @@ -667,6 +668,9 @@ static inline void net_send_packet(uchar *pkt, int len) * @param sport Source UDP port * @param payload_len Length of data after the UDP header */ +int net_send_ip_packet(uchar *ether, struct in_addr dest, int dport, int sport, + int payload_len, int proto, u8 action, u32 tcp_seq_num, + u32 tcp_ack_num); int net_send_udp_packet(uchar *ether, struct in_addr dest, int dport, int sport, int payload_len); diff --git a/net/net.c b/net/net.c index b4563a4cab..f831c34599 100644 --- a/net/net.c +++ b/net/net.c @@ -786,6 +786,14 @@ void net_set_timeout_handler(ulong iv, thand_f *f) int net_send_udp_packet(uchar *ether, struct in_addr dest, int dport, int sport, int payload_len) { +return net_send_ip_packet(ether, dest, dport, sport, payload_len, + IPPROTO_UDP, 0, 0, 0); +} + +int net_send_ip_packet(uchar *ether, struct in_addr dest, int dport, int sport, + int payload_len, int proto, u8 action, u32 tcp_seq_num, + u32 tcp_ack_num) +{ uchar *pkt; int eth_hdr_size; int pkt_hdr_size; @@ -806,9 +814,15 @@ int net_send_udp_packet(uchar *ether, struct in_addr dest, int dport, int sport, pkt = (uchar *)net_tx_packet; eth_hdr_size = net_set_ether(pkt, ether, PROT_IP); - pkt += eth_hdr_size; - net_set_udp_header(pkt, dest, dport, sport, payload_len); - pkt_hdr_size = eth_hdr_size + IP_UDP_HDR_SIZE; + + switch (proto) { + case IPPROTO_UDP: + net_set_udp_header(pkt + eth_hdr_size, dest, + dport, sport, payload_len); + pkt_hdr_size = eth_hdr_size + IP_UDP_HDR_SIZE; + break; + default: return -EINVAL; + } /* if MAC address was not discovered yet, do an ARP request */ if (memcmp(ether, net_null_ethaddr, 6) == 0) { @@ -1434,7 +1448,8 @@ int net_update_ether(struct ethernet_hdr *et, uchar *addr, uint prot) } } -void net_set_ip_header(uchar *pkt, struct in_addr dest, struct in_addr source) +void net_set_ip_header(uchar *pkt, struct in_addr dest, struct in_addr source, + u16 pkt_len, u8 proto) { struct ip_udp_hdr *ip = (struct ip_udp_hdr *)pkt; @@ -1444,11 +1459,12 @@ void net_set_ip_header(uchar *pkt, struct in_addr dest, struct in_addr source) /* IP_HDR_SIZE / 4 (not including UDP) */ ip->ip_hl_v = 0x45; ip->ip_tos = 0; - ip->ip_len = htons(IP_HDR_SIZE); + ip->ip_len = htons(pkt_len); + ip->ip_p = proto; ip->ip_id = htons(net_ip_id++); ip->ip_off = htons(IP_FLAGS_DFRAG); /* Don't fragment */ ip->ip_ttl = 255; - ip->ip_sum = 0; + ip->ip_sum = compute_ip_checksum(ip, IP_HDR_SIZE); /* already in network byte order */ net_copy_ip((void *)&ip->ip_src, &source); /* already in network byte order */ @@ -1468,10 +1484,8 @@ void net_set_udp_header(uchar *pkt, struct in_addr dest, int dport, int sport, if (len & 1) pkt[IP_UDP_HDR_SIZE + len] = 0; - net_set_ip_header(pkt, dest, net_ip); - ip->ip_len = htons(IP_UDP_HDR_SIZE + len); - ip->ip_p = IPPROTO_UDP; - ip->ip_sum = compute_ip_checksum(ip, IP_HDR_SIZE); + net_set_ip_header(pkt, dest, net_ip, IP_UDP_HDR_SIZE + len, + IPPROTO_UDP); ip->udp_src = htons(sport); ip->udp_dst = htons(dport); diff --git a/net/ping.c b/net/ping.c index 3e5461a36a..d5d914bf2a 100644 --- a/net/ping.c +++ b/net/ping.c @@ -22,14 +22,9 @@ static void set_icmp_header(uchar *pkt, struct in_addr dest) /* * Construct an IP and ICMP header. */ - struct ip_hdr *ip = (struct ip_hdr *)pkt; struct icmp_hdr *icmp = (struct icmp_hdr *)(pkt + IP_HDR_SIZE); - net_set_ip_header(pkt, dest, net_ip); - - ip->ip_len = htons(IP_ICMP_HDR_SIZE); - ip->ip_p = IPPROTO_ICMP; - ip->ip_sum = compute_ip_checksum(ip, IP_HDR_SIZE); + net_set_ip_header(pkt, dest, net_ip, IP_ICMP_HDR_SIZE, IPPROTO_ICMP); icmp->type = ICMP_ECHO_REQUEST; icmp->code = 0; -- 2.11.0

3 7

[U-Boot] [PATCH v2 1/3] linux/if_ether.h: Initial import from Linux kernel v4.17
by Bin Meng 11 Oct '18

11 Oct '18

This imports include/uapi/linux/if_ether.h from Linux kernel v4.17. It can be very helpful When porting Linux ethernet driver to U-Boot. Note it is not exactly the same as the kernel one, as checkpatch issues are fixed. Signed-off-by: Bin Meng <bmeng.cn(a)gmail.com> --- Changes in v2: - correct one indention to use space include/linux/if_ether.h | 159 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 159 insertions(+) create mode 100644 include/linux/if_ether.h diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h new file mode 100644 index 0000000..9144ad7 --- /dev/null +++ b/include/linux/if_ether.h @@ -0,0 +1,159 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Global definitions for the Ethernet IEEE 802.3 interface. + * + * Version: @(#)if_ether.h 1.0.1a 02/08/94 + * + * Author: Fred N. van Kempen, <waltje(a)uWalt.NL.Mugnet.ORG> + * Donald Becker, <becker(a)super.org> + * Alan Cox, <alan(a)lxorguk.ukuu.org.uk> + * Steve Whitehouse, <gw7rrm(a)eeshack3.swan.ac.uk> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_IF_ETHER_H +#define _UAPI_LINUX_IF_ETHER_H + +#include <linux/types.h> + +/* + * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble + * and FCS/CRC (frame check sequence). + */ + +#define ETH_ALEN 6 /* Octets in one ethernet addr */ +#define ETH_TLEN 2 /* Octets in ethernet type field */ +#define ETH_HLEN 14 /* Total octets in header. */ +#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */ +#define ETH_DATA_LEN 1500 /* Max. octets in payload */ +#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */ +#define ETH_FCS_LEN 4 /* Octets in the FCS */ + +#define ETH_MIN_MTU 68 /* Min IPv4 MTU per RFC791 */ +#define ETH_MAX_MTU 0xFFFFU /* 65535, same as IP_MAX_MTU */ + +/* + * These are the defined Ethernet Protocol ID's. + */ + +#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */ +#define ETH_P_PUP 0x0200 /* Xerox PUP packet */ +#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */ +#define ETH_P_TSN 0x22F0 /* TSN (IEEE 1722) packet */ +#define ETH_P_ERSPAN2 0x22EB /* ERSPAN version 2 (type III) */ +#define ETH_P_IP 0x0800 /* Internet Protocol packet */ +#define ETH_P_X25 0x0805 /* CCITT X.25 */ +#define ETH_P_ARP 0x0806 /* Address Resolution packet */ +#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet */ + /* [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */ +#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */ +#define ETH_P_BATMAN 0x4305 /* B.A.T.M.A.N.-Advanced packet */ + /* [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_DEC 0x6000 /* DEC Assigned proto */ +#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */ +#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */ +#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */ +#define ETH_P_LAT 0x6004 /* DEC LAT */ +#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */ +#define ETH_P_CUST 0x6006 /* DEC Customer use */ +#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */ +#define ETH_P_TEB 0x6558 /* Trans Ether Bridging */ +#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */ +#define ETH_P_ATALK 0x809B /* Appletalk DDP */ +#define ETH_P_AARP 0x80F3 /* Appletalk AARP */ +#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */ +#define ETH_P_ERSPAN 0x88BE /* ERSPAN type II */ +#define ETH_P_IPX 0x8137 /* IPX over DIX */ +#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */ +#define ETH_P_PAUSE 0x8808 /* IEEE Pause frames. See 802.3 31B */ +#define ETH_P_SLOW 0x8809 /* Slow Protocol. See 802.3ad 43B */ +#define ETH_P_WCCP 0x883E /* Web-cache coordination */ + /* protocol defined in */ + /* draft-wilson-wrec-wccp-v2-00.txt */ +#define ETH_P_MPLS_UC 0x8847 /* MPLS Unicast traffic */ +#define ETH_P_MPLS_MC 0x8848 /* MPLS Multicast traffic */ +#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */ +#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */ +#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */ +#define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */ +#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport over Ethernet */ +#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ +#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */ +#define ETH_P_8021AD 0x88A8 /* 802.1ad Service VLAN */ +#define ETH_P_802_EX1 0x88B5 /* 802.1 Local Experimental 1. */ +#define ETH_P_PREAUTH 0x88C7 /* 802.11 Preauthentication */ +#define ETH_P_TIPC 0x88CA /* TIPC */ +#define ETH_P_MACSEC 0x88E5 /* 802.1ae MACsec */ +#define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */ +#define ETH_P_MVRP 0x88F5 /* 802.1Q MVRP */ +#define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */ +#define ETH_P_NCSI 0x88F8 /* NCSI protocol */ +#define ETH_P_PRP 0x88FB /* IEC 62439-3 PRP/HSRv0 */ +#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ +#define ETH_P_IBOE 0x8915 /* Infiniband over Ethernet */ +#define ETH_P_TDLS 0x890D /* TDLS */ +#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */ +#define ETH_P_80221 0x8917 /* IEEE 802.21 Media Independent */ + /* Handover Protocol */ +#define ETH_P_HSR 0x892F /* IEC 62439-3 HSRv1 */ +#define ETH_P_NSH 0x894F /* Network Service Header */ +#define ETH_P_LOOPBACK 0x9000 /* Ethernet loopback packet, per IEEE 802.3 */ +#define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN */ + /* [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN */ + /* [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN] */ + /* [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_EDSA 0xDADA /* Ethertype DSA */ + /* [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_IFE 0xED3E /* ForCES inter-FE LFB type */ +#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv */ + /* [ NOT AN OFFICIALLY REGISTERED ID ] */ + +#define ETH_P_802_3_MIN 0x0600 /* If the value in the ethernet type is less */ + /* than this value then the frame is Ethernet */ + /* II. Else it is 802.3 */ + +/* + * Non DIX types. Won't clash for 1500 types. + */ + +#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */ +#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */ +#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */ +#define ETH_P_802_2 0x0004 /* 802.2 frames */ +#define ETH_P_SNAP 0x0005 /* Internal only */ +#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */ +#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/ +#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */ +#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */ +#define ETH_P_CAN 0x000C /* CAN: Controller Area Network */ +#define ETH_P_CANFD 0x000D /* CANFD: CAN flexible data rate*/ +#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/ +#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */ +#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz(a)cafe.net) */ +#define ETH_P_CONTROL 0x0016 /* Card specific control frames */ +#define ETH_P_IRDA 0x0017 /* Linux-IrDA */ +#define ETH_P_ECONET 0x0018 /* Acorn Econet */ +#define ETH_P_HDLC 0x0019 /* HDLC frames */ +#define ETH_P_ARCNET 0x001A /* 1A for ArcNet :-) */ +#define ETH_P_DSA 0x001B /* Distributed Switch Arch */ +#define ETH_P_TRAILER 0x001C /* Trailer switch tagging */ +#define ETH_P_PHONET 0x00F5 /* Nokia Phonet frames */ +#define ETH_P_IEEE802154 0x00F6 /* IEEE802.15.4 frame */ +#define ETH_P_CAIF 0x00F7 /* ST-Ericsson CAIF protocol */ +#define ETH_P_XDSA 0x00F8 /* Multiplexed DSA protocol */ +#define ETH_P_MAP 0x00F9 /* Qualcomm multiplexing and */ + /* aggregation protocol */ + + +#endif /* _UAPI_LINUX_IF_ETHER_H */ -- 2.7.4

2 8

[U-Boot] [PATCH] net: pch_gbe: Make probe/remove static
by Bin Meng 11 Oct '18

11 Oct '18

These two routines are internal to pch_gbe driver. Signed-off-by: Bin Meng <bmeng.cn(a)gmail.com> --- drivers/net/pch_gbe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/pch_gbe.c b/drivers/net/pch_gbe.c index d31c45f..2286dd0 100644 --- a/drivers/net/pch_gbe.c +++ b/drivers/net/pch_gbe.c @@ -429,7 +429,7 @@ static int pch_gbe_phy_init(struct udevice *dev) return 0; } -int pch_gbe_probe(struct udevice *dev) +static int pch_gbe_probe(struct udevice *dev) { struct pch_gbe_priv *priv; struct eth_pdata *plat = dev_get_platdata(dev); @@ -464,7 +464,7 @@ int pch_gbe_probe(struct udevice *dev) return pch_gbe_phy_init(dev); } -int pch_gbe_remove(struct udevice *dev) +static int pch_gbe_remove(struct udevice *dev) { struct pch_gbe_priv *priv = dev_get_priv(dev); -- 2.7.4

2 2

[U-Boot] [PATCH] linux/compat.h: Add netdev_### log macros
by Bin Meng 11 Oct '18

11 Oct '18

Currently there are two ethernet drivers (mvneta.c and mvpp2.c) that has netdev_### (eg: netdev_dbg) log macros defined in its own driver file. This adds these log macros in a common place linux/compat.h. Signed-off-by: Bin Meng <bmeng.cn(a)gmail.com> --- drivers/net/mvneta.c | 8 -------- drivers/net/mvpp2.c | 10 ---------- include/linux/compat.h | 19 +++++++++++++++++++ 3 files changed, 19 insertions(+), 18 deletions(-) diff --git a/drivers/net/mvneta.c b/drivers/net/mvneta.c index ab697b9..8cb04b5 100644 --- a/drivers/net/mvneta.c +++ b/drivers/net/mvneta.c @@ -34,14 +34,6 @@ DECLARE_GLOBAL_DATA_PTR; # error Marvell mvneta requires PHYLIB #endif -/* Some linux -> U-Boot compatibility stuff */ -#define netdev_err(dev, fmt, args...) \ - printf(fmt, ##args) -#define netdev_warn(dev, fmt, args...) \ - printf(fmt, ##args) -#define netdev_info(dev, fmt, args...) \ - printf(fmt, ##args) - #define CONFIG_NR_CPUS 1 #define ETH_HLEN 14 /* Total octets in header */ diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c index 62c0c2b..5c1f5fc 100644 --- a/drivers/net/mvpp2.c +++ b/drivers/net/mvpp2.c @@ -35,16 +35,6 @@ DECLARE_GLOBAL_DATA_PTR; -/* Some linux -> U-Boot compatibility stuff */ -#define netdev_err(dev, fmt, args...) \ - printf(fmt, ##args) -#define netdev_warn(dev, fmt, args...) \ - printf(fmt, ##args) -#define netdev_info(dev, fmt, args...) \ - printf(fmt, ##args) -#define netdev_dbg(dev, fmt, args...) \ - printf(fmt, ##args) - #define ETH_ALEN 6 /* Octets in one ethernet addr */ #define __verify_pcpu_ptr(ptr) \ diff --git a/include/linux/compat.h b/include/linux/compat.h index 6e3feb6..d0f51ba 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -43,6 +43,25 @@ extern struct p_current *current; #define dev_warn(dev, fmt, args...) \ printf(fmt, ##args) +#define netdev_emerg(dev, fmt, args...) \ + printf(fmt, ##args) +#define netdev_alert(dev, fmt, args...) \ + printf(fmt, ##args) +#define netdev_crit(dev, fmt, args...) \ + printf(fmt, ##args) +#define netdev_err(dev, fmt, args...) \ + printf(fmt, ##args) +#define netdev_warn(dev, fmt, args...) \ + printf(fmt, ##args) +#define netdev_notice(dev, fmt, args...) \ + printf(fmt, ##args) +#define netdev_info(dev, fmt, args...) \ + printf(fmt, ##args) +#define netdev_dbg(dev, fmt, args...) \ + debug(fmt, ##args) +#define netdev_vdbg(dev, fmt, args...) \ + debug(fmt, ##args) + #define GFP_ATOMIC ((gfp_t) 0) #define GFP_KERNEL ((gfp_t) 0) #define GFP_NOFS ((gfp_t) 0) -- 2.7.4

2 7

[U-Boot] [PATCH 1/2] linux/mii.h: Sync with Linux kernel v4.17
by Bin Meng 11 Oct '18

11 Oct '18

This syncs U-Boot's include/linux/mii.h with Linux kernel v4.17 include/uapi/linux/mii.h. While we are here, this also fixes some style issues. Signed-off-by: Bin Meng <bmeng.cn(a)gmail.com> --- include/linux/mii.h | 126 ++++++++++++++++++++++++++++------------------------ 1 file changed, 69 insertions(+), 57 deletions(-) diff --git a/include/linux/mii.h b/include/linux/mii.h index 19afb74..21db032 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ /* * linux/mii.h: definitions for MII-compatible transceivers * Originally drivers/net/sunhme.h. @@ -9,53 +10,55 @@ #define __LINUX_MII_H__ /* Generic MII registers. */ - -#define MII_BMCR 0x00 /* Basic mode control register */ -#define MII_BMSR 0x01 /* Basic mode status register */ -#define MII_PHYSID1 0x02 /* PHYS ID 1 */ -#define MII_PHYSID2 0x03 /* PHYS ID 2 */ -#define MII_ADVERTISE 0x04 /* Advertisement control reg */ -#define MII_LPA 0x05 /* Link partner ability reg */ -#define MII_EXPANSION 0x06 /* Expansion register */ -#define MII_CTRL1000 0x09 /* 1000BASE-T control */ -#define MII_STAT1000 0x0a /* 1000BASE-T status */ -#define MII_ESTATUS 0x0f /* Extended Status */ -#define MII_DCOUNTER 0x12 /* Disconnect counter */ -#define MII_FCSCOUNTER 0x13 /* False carrier counter */ -#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */ -#define MII_RERRCOUNTER 0x15 /* Receive error counter */ -#define MII_SREVISION 0x16 /* Silicon revision */ -#define MII_RESV1 0x17 /* Reserved... */ -#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */ -#define MII_PHYADDR 0x19 /* PHY address */ -#define MII_RESV2 0x1a /* Reserved... */ -#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */ -#define MII_NCONFIG 0x1c /* Network interface config */ +#define MII_BMCR 0x00 /* Basic mode control register */ +#define MII_BMSR 0x01 /* Basic mode status register */ +#define MII_PHYSID1 0x02 /* PHYS ID 1 */ +#define MII_PHYSID2 0x03 /* PHYS ID 2 */ +#define MII_ADVERTISE 0x04 /* Advertisement control reg */ +#define MII_LPA 0x05 /* Link partner ability reg */ +#define MII_EXPANSION 0x06 /* Expansion register */ +#define MII_CTRL1000 0x09 /* 1000BASE-T control */ +#define MII_STAT1000 0x0a /* 1000BASE-T status */ +#define MII_MMD_CTRL 0x0d /* MMD Access Control Register */ +#define MII_MMD_DATA 0x0e /* MMD Access Data Register */ +#define MII_ESTATUS 0x0f /* Extended Status */ +#define MII_DCOUNTER 0x12 /* Disconnect counter */ +#define MII_FCSCOUNTER 0x13 /* False carrier counter */ +#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */ +#define MII_RERRCOUNTER 0x15 /* Receive error counter */ +#define MII_SREVISION 0x16 /* Silicon revision */ +#define MII_RESV1 0x17 /* Reserved... */ +#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */ +#define MII_PHYADDR 0x19 /* PHY address */ +#define MII_RESV2 0x1a /* Reserved... */ +#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */ +#define MII_NCONFIG 0x1c /* Network interface config */ /* Basic mode control register. */ -#define BMCR_RESV 0x003f /* Unused... */ -#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ -#define BMCR_CTST 0x0080 /* Collision test */ -#define BMCR_FULLDPLX 0x0100 /* Full duplex */ +#define BMCR_RESV 0x003f /* Unused... */ +#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ +#define BMCR_CTST 0x0080 /* Collision test */ +#define BMCR_FULLDPLX 0x0100 /* Full duplex */ #define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */ -#define BMCR_ISOLATE 0x0400 /* Disconnect DP83840 from MII */ -#define BMCR_PDOWN 0x0800 /* Powerdown the DP83840 */ +#define BMCR_ISOLATE 0x0400 /* Isolate data paths from MII */ +#define BMCR_PDOWN 0x0800 /* Enable low power state */ #define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */ -#define BMCR_SPEED100 0x2000 /* Select 100Mbps */ -#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */ -#define BMCR_RESET 0x8000 /* Reset the DP83840 */ +#define BMCR_SPEED100 0x2000 /* Select 100Mbps */ +#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */ +#define BMCR_RESET 0x8000 /* Reset to default state */ +#define BMCR_SPEED10 0x0000 /* Select 10Mbps */ /* Basic mode status register. */ -#define BMSR_ERCAP 0x0001 /* Ext-reg capability */ -#define BMSR_JCD 0x0002 /* Jabber detected */ -#define BMSR_LSTATUS 0x0004 /* Link status */ +#define BMSR_ERCAP 0x0001 /* Ext-reg capability */ +#define BMSR_JCD 0x0002 /* Jabber detected */ +#define BMSR_LSTATUS 0x0004 /* Link status */ #define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */ #define BMSR_RFAULT 0x0010 /* Remote fault detected */ #define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */ -#define BMSR_RESV 0x00c0 /* Unused... */ -#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */ -#define BMSR_100HALF2 0x0200 /* Can do 100BASE-T2 HDX */ -#define BMSR_100FULL2 0x0400 /* Can do 100BASE-T2 FDX */ +#define BMSR_RESV 0x00c0 /* Unused... */ +#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */ +#define BMSR_100HALF2 0x0200 /* Can do 100BASE-T2 HDX */ +#define BMSR_100FULL2 0x0400 /* Can do 100BASE-T2 FDX */ #define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ #define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ #define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ @@ -63,7 +66,7 @@ #define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */ /* Advertisement control register. */ -#define ADVERTISE_SLCT 0x001f /* Selector bits */ +#define ADVERTISE_SLCT 0x001f /* Selector bits */ #define ADVERTISE_CSMA 0x0001 /* Only selector supported */ #define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ #define ADVERTISE_1000XFULL 0x0020 /* Try for 1000BASE-X full-duplex */ @@ -72,19 +75,19 @@ #define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ #define ADVERTISE_1000XPAUSE 0x0080 /* Try for 1000BASE-X pause */ #define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ -#define ADVERTISE_1000XPSE_ASYM 0x0100 /* Try for 1000BASE-X asym pause */ +#define ADVERTISE_1000XPSE_ASYM 0x0100 /* Try for 1000BASE-X asym pause */ #define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */ -#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */ +#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */ #define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymetric pause */ -#define ADVERTISE_RESV 0x1000 /* Unused... */ +#define ADVERTISE_RESV 0x1000 /* Unused... */ #define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */ #define ADVERTISE_LPACK 0x4000 /* Ack link partners response */ -#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ +#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ -#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \ - ADVERTISE_CSMA) -#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ - ADVERTISE_100HALF | ADVERTISE_100FULL) +#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \ + ADVERTISE_CSMA) +#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ + ADVERTISE_100HALF | ADVERTISE_100FULL) /* Link partner ability register. */ #define LPA_SLCT 0x001f /* Same as advertise selector */ @@ -97,12 +100,12 @@ #define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ #define LPA_1000XPAUSE_ASYM 0x0100 /* Can do 1000BASE-X pause asym*/ #define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */ -#define LPA_PAUSE_CAP 0x0400 /* Can pause */ +#define LPA_PAUSE_CAP 0x0400 /* Can pause */ #define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */ -#define LPA_RESV 0x1000 /* Unused... */ +#define LPA_RESV 0x1000 /* Unused... */ #define LPA_RFAULT 0x2000 /* Link partner faulted */ #define LPA_LPACK 0x4000 /* Link partner acked us */ -#define LPA_NPAGE 0x8000 /* Next page bit */ +#define LPA_NPAGE 0x8000 /* Next page bit */ #define LPA_DUPLEX (LPA_10FULL | LPA_100FULL) #define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4) @@ -113,21 +116,23 @@ #define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */ #define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */ #define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */ -#define EXPANSION_RESV 0xffe0 /* Unused... */ +#define EXPANSION_RESV 0xffe0 /* Unused... */ #define ESTATUS_1000_XFULL 0x8000 /* Can do 1000BX Full */ #define ESTATUS_1000_XHALF 0x4000 /* Can do 1000BX Half */ -#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */ -#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */ +#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */ +#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */ /* N-way test register. */ -#define NWAYTEST_RESV1 0x00ff /* Unused... */ +#define NWAYTEST_RESV1 0x00ff /* Unused... */ #define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */ -#define NWAYTEST_RESV2 0xfe00 /* Unused... */ +#define NWAYTEST_RESV2 0xfe00 /* Unused... */ /* 1000BASE-T Control register */ -#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */ -#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */ +#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */ +#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */ +#define CTL1000_AS_MASTER 0x0800 +#define CTL1000_ENABLE_MASTER 0x1000 /* 1000BASE-T Status register */ #define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */ @@ -139,6 +144,13 @@ #define FLOW_CTRL_TX 0x01 #define FLOW_CTRL_RX 0x02 +/* MMD Access Control register fields */ +#define MII_MMD_CTRL_DEVAD_MASK 0x1f /* Mask MMD DEVAD*/ +#define MII_MMD_CTRL_ADDR 0x0000 /* Address */ +#define MII_MMD_CTRL_NOINCR 0x4000 /* no post increment */ +#define MII_MMD_CTRL_INCR_RDWT 0x8000 /* post increment on reads & writes */ +#define MII_MMD_CTRL_INCR_ON_WT 0xC000 /* post increment on writes only */ + /** * mii_nway_result * @negotiated: value of MII ANAR and'd with ANLPAR -- 2.7.4

2 5

[U-Boot] [PATCH] rtc: Add read8 and write8 support to isl1208 driver
by Trent Piepho 11 Oct '18

11 Oct '18

This can be used for device register access from board code. This allows access to capabilities in the RTC chip not abstracted in U-Boot's RTC class. E.g., device NVRAM or a tamper detection circuit. Cc: Klaus Goger <klaus.goger(a)theobroma-systems.com> Cc: Philipp Tomsich <philipp.tomsich(a)theobroma-systems.com> Cc: Simon Glass <sjg(a)chromium.org> Signed-off-by: Trent Piepho <tpiepho(a)impinj.com> --- drivers/rtc/isl1208.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/rtc/isl1208.c b/drivers/rtc/isl1208.c index 22ac0d2b08..59a60b75b3 100644 --- a/drivers/rtc/isl1208.c +++ b/drivers/rtc/isl1208.c @@ -51,6 +51,24 @@ #define RTC_STAT_BIT_BAT 0x02 /* BATTERY BIT */ #define RTC_STAT_BIT_RTCF 0x01 /* REAL TIME CLOCK FAIL BIT */ +/* + * Read an RTC register + */ + +static int isl1208_rtc_read8(struct udevice *dev, unsigned int reg) +{ + return dm_i2c_reg_read(dev, reg); +} + +/* + * Write an RTC register + */ + +static int isl1208_rtc_write8(struct udevice *dev, unsigned int reg, int val) +{ + return dm_i2c_reg_write(dev, reg, val); +} + /* * Get the current time from the RTC */ @@ -161,6 +179,8 @@ static const struct rtc_ops isl1208_rtc_ops = { .get = isl1208_rtc_get, .set = isl1208_rtc_set, .reset = isl1208_rtc_reset, + .read8 = isl1208_rtc_read8, + .write8 = isl1208_rtc_write8, }; static const struct udevice_id isl1208_rtc_ids[] = { -- 2.14.3

3 2

[U-Boot] [PATCH 1/3] Revert "ARM: imx6: Disable DDR DRAM calibration DHCOM i.MX6 PDK"
by lzenz＠dh-electronics.de 11 Oct '18

11 Oct '18

From: Ludwig Zenz <lzenz(a)dh-electronics.de> This reverts commit a637fe6f27fd4c19ef9f43a5f871c244581422ac. The DDR DRAM calibration was enhanced by write leveling correction code. It can be used with T-topology now. Signed-off-by: Ludwig Zenz <lzenz(a)dh-electronics.de> --- board/dhelectronics/dh_imx6/dh_imx6_spl.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/board/dhelectronics/dh_imx6/dh_imx6_spl.c b/board/dhelectronics/dh_imx6/dh_imx6_spl.c index dffe4eb..beda389 100644 --- a/board/dhelectronics/dh_imx6/dh_imx6_spl.c +++ b/board/dhelectronics/dh_imx6/dh_imx6_spl.c @@ -384,6 +384,10 @@ void board_init_f(ulong dummy) &dhcom6sdl_grp_ioregs); mx6_dram_cfg(&dhcom_ddr_info, &dhcom_mmdc_calib, &dhcom_mem_ddr); + /* Perform DDR DRAM calibration */ + udelay(100); + mmdc_do_dqs_calibration(&dhcom_ddr_info); + /* Clear the BSS. */ memset(__bss_start, 0, __bss_end - __bss_start); -- 2.7.4

4 8

[U-Boot] [PATCH 00/11] efi_loader: patches for Shell.efi
by Rob Clark 10 Oct '18

10 Oct '18

Re-send of the patch series to get Shell.efi working, and almost get SCT.efi (the UEFI test suite) working. Since last time, I've updated to Heinrich's latest SetWatchdogTimer patch (as of yesterday evening), and adressed review comments on the three new sets of protocols added. Part of that, to avoid moving changes from my later patch that added implementation on top of Leif's initial stubs was done by simply squashing the patches together. Heinrich Schuchardt (1): efi_loader: implement SetWatchdogTimer Leif Lindholm (3): efi_loader: Initial EFI_DEVICE_PATH_UTILITIES_PROTOCOL efi_loader: Initial HII protocols efi_loader: Initial EFI_UNICODE_COLLATION_PROTOCOL Rob Clark (7): efi_loader: SIMPLE_TEXT_INPUT_EX plus wire up objects properly efi_loader: console support for color attributes efi_loader: Decouple EFI input/output from stdin/stdout efi_loader: fix events efi_loader: Fix disk dp's for pre-DM/legacy devices efi_loader: Add mem-mapped for fallback efi_loader: exclude openrd devices cmd/bootefi.c | 24 ++ include/efi_api.h | 438 ++++++++++++++++++++++++- include/efi_loader.h | 29 +- lib/efi_loader/Kconfig | 2 +- lib/efi_loader/Makefile | 3 +- lib/efi_loader/efi_boottime.c | 256 ++++++++------- lib/efi_loader/efi_console.c | 398 +++++++++++++++++++--- lib/efi_loader/efi_device_path.c | 24 ++ lib/efi_loader/efi_device_path_to_text.c | 9 + lib/efi_loader/efi_device_path_utilities.c | 88 +++++ lib/efi_loader/efi_disk.c | 11 + lib/efi_loader/efi_hii.c | 507 +++++++++++++++++++++++++++++ lib/efi_loader/efi_unicode.c | 170 ++++++++++ lib/efi_loader/efi_watchdog.c | 86 +++++ 14 files changed, 1861 insertions(+), 184 deletions(-) create mode 100644 lib/efi_loader/efi_device_path_utilities.c create mode 100644 lib/efi_loader/efi_hii.c create mode 100644 lib/efi_loader/efi_unicode.c create mode 100644 lib/efi_loader/efi_watchdog.c -- 2.13.6

7 74

[U-Boot] [PATCH 00/10] net: fec: Code Improvement/cleanups
by Jagan Teki 09 Oct '18

09 Oct '18

2 20

[U-Boot] [PATCH] rockchip: make_fit_atf.py depends on u-boot
by Andreas Färber 04 Oct '18

04 Oct '18

u-boot.itb depends on u-boot-nodtb.bin, which in turn depends on u-boot. u-boot.its from Rockchip make_fit_atf.py (used by {evb,firefly}-rk3399) wants to read u-boot but is lacking this dependency, so that u-boot.itb cannot be built in one go. Detect its use and add the missing dependency. Reported-by: Yousaf Kaukab <yousaf.kaukab(a)suse.com> Signed-off-by: Andreas Färber <afaerber(a)suse.de> --- Makefile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/Makefile b/Makefile index f31ee60e4c..3723346c4f 100644 --- a/Makefile +++ b/Makefile @@ -1051,7 +1051,10 @@ U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE)) else ifneq ($(CONFIG_SPL_FIT_GENERATOR),"") U_BOOT_ITS := u-boot.its -$(U_BOOT_ITS): FORCE +ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py") +U_BOOT_ITS_DEPS += u-boot +endif +$(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \ $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@ endif -- 2.16.3

2 2