January 2018 - U-Boot

[U-Boot] U-Boot, cache speculation side channel attacks and ARM
by Tom Rini 20 Jan '18

20 Jan '18

Hey all, So, now that things have quieted down a little bit in this area, I've been wondering about something. Over on the U-Boot side of things, are there changes we need to make in order to support the kernel side of the various mitigations properly? I know that for example currently https://developer.arm.com/support/security-update talks about ATF patches, in the context of AArch64 however. But on the other hand for variant 2, there's nothing listed on the Linux side for 32bit ARM, but there is for non-Linux OSes. And, in the event I'm also missing something else entirely that we need to do here, is there something that we need to be doing? Or is it still too early at this point in time to know? Thanks all! -- Tom

6 11

[U-Boot] [PATCH v2 0/4] ddr: marvell: update DDR driver
by Chris Packham 20 Jan '18

20 Jan '18

I have a custom board that sees correctable ECC errors (when running memtester[1] from Linux). When I used Marvell's bootloader I didn't see the errors. I've also had a tame hardware engineer (if there is such a thing) looking at the timing waveforms comparing the stock u-boot behaviour against Marvell's bootloader. The changes for this series have been derived by comparing scope captures and register output between the same system running stock u-boot and Marvell's USP. Changes in v2: - Update tODT_OFF_WR as well - Added patches 2-4 Chris Packham (4): ddr: marvell: only assert M_ODT[0] on write for a single CS ddr: marvell: use correct TREFI value ddr: marvell: update additional ODT setting ddr: marvell: update ddr controller init and freq drivers/ddr/marvell/a38x/ddr3_init.h | 3 +- drivers/ddr/marvell/a38x/ddr3_topology_def.h | 3 +- drivers/ddr/marvell/a38x/ddr3_training.c | 50 +++++++++++++++--------- drivers/ddr/marvell/a38x/ddr3_training_db.c | 19 +++++---- drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c | 22 +++++++---- drivers/ddr/marvell/a38x/ddr3_training_static.c | 3 +- 6 files changed, 62 insertions(+), 38 deletions(-) -- 2.15.1

2 5

[U-Boot] [PATCH] configs: keystone2: env: Fix burn_uboot_spi command
by Faiz Abbas 19 Jan '18

19 Jan '18

Now the u-boot spi image is greater than 0x90000, increase the same in env during spi erase. Signed-off-by: Faiz Abbas <faiz_abbas(a)ti.com> --- include/configs/ti_armv7_keystone2.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index 562bb65..7fb3aaf 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -266,7 +266,7 @@ "${bootdir}/${fit_bootfile}\0" \ "get_uboot_net=dhcp ${loadaddr} ${tftp_root}/${name_uboot}\0" \ "get_uboot_nfs=nfs ${loadaddr} ${nfs_root}/boot/${name_uboot}\0" \ - "burn_uboot_spi=sf probe; sf erase 0 0x90000; " \ + "burn_uboot_spi=sf probe; sf erase 0 0x100000; " \ "sf write ${loadaddr} 0 ${filesize}\0" \ "burn_uboot_nand=nand erase 0 0x100000; " \ "nand write ${loadaddr} 0 ${filesize}\0" \ -- 2.7.4

2 4

[U-Boot] [PATCH] checkpatch: Ignore 'short' Kconfig help entries
by Tom Rini 19 Jan '18

19 Jan '18

A 2 line help entry for a new Kconfig entry is, at this time, sufficient in some cases, so lets drop that warning for now. Signed-off-by: Tom Rini <trini(a)konsulko.com> --- .checkpatch.conf | 3 +++ 1 file changed, 3 insertions(+) diff --git a/.checkpatch.conf b/.checkpatch.conf index d1d32fac9db5..95f19635d35a 100644 --- a/.checkpatch.conf +++ b/.checkpatch.conf @@ -25,3 +25,6 @@ # Ignore "WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet # addresses are __aligned(2)". --ignore PREFER_ETHER_ADDR_COPY + +# A bit shorter of a description is OK with us. +--min-conf-desc-length=2 -- 2.7.4

1 1

[U-Boot] [PATCH] powerpc: Drop unreferenced CONFIG_* defines
by Tuomas Tynkkynen 19 Jan '18

19 Jan '18

The following config symbols are only defined once and never referenced anywhere else: CONFIG_CYRUS CONFIG_IDS8313 CONFIG_MPC8308_P1M CONFIG_MPC8308RDB CONFIG_MPC8349EMDS CONFIG_MPC8349ITXGP CONFIG_SBC8349 CONFIG_SBC8548 CONFIG_SBC8641D CONFIG_TQM834X CONFIG_VE8313 CONFIG_XPEDITE5140 CONFIG_XPEDITE5200 CONFIG_XPEDITE550X Most of them are config symbols named after the respective boards which seems to have been a standard practice at some point. Signed-off-by: Tuomas Tynkkynen <tuomas(a)tuxera.com> --- board/freescale/mpc8349itx/README | 1 - configs/MPC8349ITXGP_defconfig | 2 +- include/configs/MPC8308RDB.h | 1 - include/configs/MPC8349EMDS.h | 1 - include/configs/TQM834x.h | 1 - include/configs/cyrus.h | 2 -- include/configs/ids8313.h | 1 - include/configs/mpc8308_p1m.h | 1 - include/configs/sbc8349.h | 1 - include/configs/sbc8548.h | 1 - include/configs/sbc8641d.h | 1 - include/configs/ve8313.h | 1 - include/configs/xpedite517x.h | 1 - include/configs/xpedite520x.h | 1 - include/configs/xpedite550x.h | 1 - scripts/config_whitelist.txt | 14 -------------- 16 files changed, 1 insertion(+), 30 deletions(-) diff --git a/board/freescale/mpc8349itx/README b/board/freescale/mpc8349itx/README index 48bbd50356..3012b83737 100644 --- a/board/freescale/mpc8349itx/README +++ b/board/freescale/mpc8349itx/README @@ -91,7 +91,6 @@ Freescale MPC8349E-mITX and MPC8349E-mITX-GP Boards CONFIG_MPC83xx MPC83xx family CONFIG_MPC8349 MPC8349 specific CONFIG_MPC8349ITX MPC8349E-mITX - CONFIG_MPC8349ITXGP MPC8349E-mITX-GP 5. Compilation diff --git a/configs/MPC8349ITXGP_defconfig b/configs/MPC8349ITXGP_defconfig index 319141de1b..97dc8e7a80 100644 --- a/configs/MPC8349ITXGP_defconfig +++ b/configs/MPC8349ITXGP_defconfig @@ -3,7 +3,7 @@ CONFIG_MPC83xx=y CONFIG_TARGET_MPC8349ITX=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="MPC8349ITXGP,SYS_TEXT_BASE=0xFE000000" +CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFE000000" CONFIG_BOOTDELAY=6 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=:/nfsroot/rootfs ip=::::mpc8349emitxgp:eth0:off console=ttyS0,115200" diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index bd0cb6fddc..d348ec9367 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -15,7 +15,6 @@ #define CONFIG_E300 1 /* E300 family */ #define CONFIG_MPC830x 1 /* MPC830x family */ #define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ -#define CONFIG_MPC8308RDB 1 /* MPC8308RDB board specific */ #define CONFIG_SYS_TEXT_BASE 0xFE000000 diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 9b906a7c77..c7a5ee0aaf 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -19,7 +19,6 @@ #define CONFIG_E300 1 /* E300 Family */ #define CONFIG_MPC834x 1 /* MPC834x family */ #define CONFIG_MPC8349 1 /* MPC8349 specific */ -#define CONFIG_MPC8349EMDS 1 /* MPC8349EMDS board specific */ #define CONFIG_SYS_TEXT_BASE 0xFE000000 diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 0c6bcae33c..9d27358031 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -18,7 +18,6 @@ #define CONFIG_E300 1 /* E300 Family */ #define CONFIG_MPC834x 1 /* MPC834x specific */ #define CONFIG_MPC8349 1 /* MPC8349 specific */ -#define CONFIG_TQM834X 1 /* TQM834X board specific */ #define CONFIG_SYS_TEXT_BASE 0x80000000 diff --git a/include/configs/cyrus.h b/include/configs/cyrus.h index e413b5158c..3da91e80c8 100644 --- a/include/configs/cyrus.h +++ b/include/configs/cyrus.h @@ -7,8 +7,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_CYRUS - #if !defined(CONFIG_ARCH_P5020) && !defined(CONFIG_ARCH_P5040) #error Must call Cyrus CONFIG with a specific CPU enabled. #endif diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index b43c8c711e..12eb07d1f7 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -17,7 +17,6 @@ */ #define CONFIG_MPC831x #define CONFIG_MPC8313 -#define CONFIG_IDS8313 #define CONFIG_FSL_ELBC diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index f97773146a..69c4309139 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -15,7 +15,6 @@ #define CONFIG_E300 1 /* E300 family */ #define CONFIG_MPC830x 1 /* MPC830x family */ #define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ -#define CONFIG_MPC8308_P1M 1 /* mpc8308_p1m board specific */ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFC000000 diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 328cdf4757..7f1620db02 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -21,7 +21,6 @@ #define CONFIG_E300 1 /* E300 Family */ #define CONFIG_MPC834x 1 /* MPC834x family */ #define CONFIG_MPC8349 1 /* MPC8349 specific */ -#define CONFIG_SBC8349 1 /* WRS SBC8349 board specific */ #define CONFIG_SYS_TEXT_BASE 0xFF800000 diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index a2a715b99d..041e69e1f7 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -36,7 +36,6 @@ /* * High Level Configuration Options */ -#define CONFIG_SBC8548 1 /* SBC8548 board specific */ /* * If you want to boot from the SODIMM flash, instead of the soldered diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 817c9d920d..03709adb2d 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -21,7 +21,6 @@ #define __CONFIG_H /* High Level Configuration Options */ -#define CONFIG_SBC8641D 1 /* SBC8641D board specific */ #define CONFIG_MP 1 /* support multiple processors */ #define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index 3ac11ccb8f..94a59f3e90 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -19,7 +19,6 @@ #define CONFIG_E300 1 #define CONFIG_MPC831x 1 #define CONFIG_MPC8313 1 -#define CONFIG_VE8313 1 #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xfe000000 diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index 4326984b06..f95d47a9a0 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -14,7 +14,6 @@ /* * High Level Configuration Options */ -#define CONFIG_XPEDITE5140 1 /* MPC8641HPCN board specific */ #define CONFIG_SYS_BOARD_NAME "XPedite5170" #define CONFIG_SYS_FORM_3U_VPX 1 #define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h index 5a56162e7c..c0df5ef02b 100644 --- a/include/configs/xpedite520x.h +++ b/include/configs/xpedite520x.h @@ -14,7 +14,6 @@ /* * High Level Configuration Options */ -#define CONFIG_XPEDITE5200 1 #define CONFIG_SYS_BOARD_NAME "XPedite5200" #define CONFIG_SYS_FORM_PMC_XMC 1 #define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */ diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index 624e9a82d0..b5e8231873 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -14,7 +14,6 @@ /* * High Level Configuration Options */ -#define CONFIG_XPEDITE550X 1 #define CONFIG_SYS_BOARD_NAME "XPedite5500" #define CONFIG_SYS_FORM_PMC_XMC 1 #define CONFIG_PRPMC_PCI_ALIAS "pci0" /* Processor PMC interface on pci0 */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 4160c59a4b..a661882640 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -335,7 +335,6 @@ CONFIG_CSF_SIZE CONFIG_CTL_JTAG CONFIG_CTL_TBE CONFIG_CUSTOMER_BOARD_SUPPORT -CONFIG_CYRUS CONFIG_D2NET_V2 CONFIG_DA850_AM18X_EVM CONFIG_DA850_EVM_MAX_CPU_CLK @@ -1018,7 +1017,6 @@ CONFIG_IDE_PCMCIA CONFIG_IDE_PREINIT CONFIG_IDE_RESET CONFIG_IDE_SWAP_IO -CONFIG_IDS8313 CONFIG_IDT8T49N222A CONFIG_ID_EEPROM CONFIG_IMA @@ -1343,8 +1341,6 @@ CONFIG_MODVERSIONS CONFIG_MONITOR_IS_IN_RAM CONFIG_MP CONFIG_MPC8308 -CONFIG_MPC8308RDB -CONFIG_MPC8308_P1M CONFIG_MPC8309 CONFIG_MPC830x CONFIG_MPC8313 @@ -1355,9 +1351,7 @@ CONFIG_MPC831x CONFIG_MPC832XEMDS CONFIG_MPC832x CONFIG_MPC8349 -CONFIG_MPC8349EMDS CONFIG_MPC8349ITX -CONFIG_MPC8349ITXGP CONFIG_MPC834x CONFIG_MPC8360 CONFIG_MPC837XEMDS @@ -1835,9 +1829,6 @@ CONFIG_SAR_REG CONFIG_SATA1 CONFIG_SATA2 CONFIG_SATA_ULI5288 -CONFIG_SBC8349 -CONFIG_SBC8548 -CONFIG_SBC8641D CONFIG_SCF0403_LCD CONFIG_SCIF CONFIG_SCIF_A @@ -4702,7 +4693,6 @@ CONFIG_TMU_TIMER CONFIG_TPL_PAD_TO CONFIG_TPM_TIS_BASE_ADDRESS CONFIG_TPS6586X_POWER -CONFIG_TQM834X CONFIG_TRACE CONFIG_TRACE_BUFFER_SIZE CONFIG_TRACE_EARLY @@ -4908,7 +4898,6 @@ CONFIG_U_QE CONFIG_VAL CONFIG_VAR_SIZE_SPL CONFIG_VCT_NOR -CONFIG_VE8313 CONFIG_VERY_BIG_RAM CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP @@ -4962,9 +4951,6 @@ CONFIG_XILINX_GPIO CONFIG_XILINX_LL_TEMAC_CLK CONFIG_XILINX_SPI_IDLE_VAL CONFIG_XILINX_TB_WATCHDOG -CONFIG_XPEDITE5140 -CONFIG_XPEDITE5200 -CONFIG_XPEDITE550X CONFIG_XR16L2751 CONFIG_XSENGINE CONFIG_XTFPGA -- 2.15.0

3 2

[U-Boot] [PATCH 0/2] Rename serial_stm32x7.c to serial_stm32.c
by patrice.chotard＠st.com 19 Jan '18

19 Jan '18

From: Patrice Chotard <patrice.chotard(a)st.com> As driver serial_stm32x7.c is used by all STM32 SoCs family (F4/F7 and H7) rename it with the generic name serial_stm32.c Move also some flags from defconfig to stm32 machine Kconfig Patrice Chotard (2): serial: stm32: Rename serial_stm32x7.c to serial_stm32.c configs: stm32: move config flag from defconfig to Kconfig arch/arm/mach-stm32/Kconfig | 24 +++++++++++++++++++++- configs/stm32f429-discovery_defconfig | 11 ---------- configs/stm32f469-discovery_defconfig | 11 ---------- configs/stm32f746-disco_defconfig | 11 ---------- drivers/serial/Kconfig | 2 +- drivers/serial/Makefile | 2 +- .../serial/{serial_stm32x7.c => serial_stm32.c} | 4 ++-- .../serial/{serial_stm32x7.h => serial_stm32.h} | 4 ++-- 8 files changed, 29 insertions(+), 40 deletions(-) rename drivers/serial/{serial_stm32x7.c => serial_stm32.c} (98%) rename drivers/serial/{serial_stm32x7.h => serial_stm32.h} (97%) -- 1.9.1

3 6

[U-Boot] [PATCH] m68k: Drop unreferenced CONFIG_* defines
by Tuomas Tynkkynen 19 Jan '18

19 Jan '18

The following config symbols are only defined once and never referenced anywhere else: CONFIG_AMCORE CONFIG_ASTRO5373L CONFIG_M52277EVB CONFIG_M5253DEMO CONFIG_M5253EVBE CONFIG_M5275EVB CONFIG_M54418TWR CONFIG_STMARK2 Most of them are config symbols named after the respective boards which seems to have been a standard practice at some point. Signed-off-by: Tuomas Tynkkynen <tuomas(a)tuxera.com> --- board/freescale/m52277evb/README | 1 - board/freescale/m5253evbe/README | 1 - doc/README.m54418twr | 1 - include/configs/M52277EVB.h | 1 - include/configs/M5253DEMO.h | 2 -- include/configs/M5253EVBE.h | 2 -- include/configs/M5275EVB.h | 1 - include/configs/M54418TWR.h | 1 - include/configs/amcore.h | 1 - include/configs/astro_mcf5373l.h | 2 -- include/configs/stmark2.h | 1 - scripts/config_whitelist.txt | 8 -------- 12 files changed, 22 deletions(-) diff --git a/board/freescale/m52277evb/README b/board/freescale/m52277evb/README index 89e033e1c5..b7ceb5993e 100644 --- a/board/freescale/m52277evb/README +++ b/board/freescale/m52277evb/README @@ -67,7 +67,6 @@ Changed files: 1.2 Configuration settings for M52277EVB Development Board CONFIG_MCF5227x -- define for all MCF5227x CPUs CONFIG_M52277 -- define for all Freescale MCF52277 CPUs -CONFIG_M52277EVB -- define for M52277EVB board CONFIG_MCFUART -- define to use common CF Uart driver CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2 diff --git a/board/freescale/m5253evbe/README b/board/freescale/m5253evbe/README index 2ed5c768d5..f4eae67fc0 100644 --- a/board/freescale/m5253evbe/README +++ b/board/freescale/m5253evbe/README @@ -27,7 +27,6 @@ Created 06/05/2007 3.1 Explanation on NEW definitions in include/configs/M5253EVBE.h CONFIG_MCF52x2 Processor family CONFIG_MCF5253 MCF5253 specific - CONFIG_M5253EVBE Amadeus Plus board specific CONFIG_SYS_CLK Define Amadeus Plus CPU Clock CONFIG_SYS_MBAR MBAR base address CONFIG_SYS_MBAR2 MBAR2 base address diff --git a/doc/README.m54418twr b/doc/README.m54418twr index 1d90fccbcf..0ca74aa114 100644 --- a/doc/README.m54418twr +++ b/doc/README.m54418twr @@ -63,7 +63,6 @@ Changed files: 1.2 Configuration settings for M54418TWR Development Board CONFIG_MCF5441x -- define for all MCF5441x CPUs CONFIG_M54418 -- define for all Freescale MCF54418 CPUs -CONFIG_M54418TWR -- define for M54418TWR board CONFIG_MCFUART -- define to use common CF Uart driver CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2 diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index 98692df495..72183f284a 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -18,7 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_M52277EVB /* M52277EVB board */ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index ff0995e651..91e4bf80b2 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -7,8 +7,6 @@ #ifndef _M5253DEMO_H #define _M5253DEMO_H -#define CONFIG_M5253DEMO /* define board type */ - #define CONFIG_MCFTMR #define CONFIG_MCFUART diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index d7252a1b62..8d7250a5ba 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -8,8 +8,6 @@ #ifndef _M5253EVBE_H #define _M5253EVBE_H -#define CONFIG_M5253EVBE /* define board type */ - #define CONFIG_MCFTMR #define CONFIG_MCFUART diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index bbc45bf7ba..38e785c068 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -21,7 +21,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_M5275EVB /* define board type */ #define CONFIG_MCFTMR diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h index 6469a919f6..3e2b6e174e 100644 --- a/include/configs/M54418TWR.h +++ b/include/configs/M54418TWR.h @@ -18,7 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_M54418TWR /* M54418TWR board */ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) diff --git a/include/configs/amcore.h b/include/configs/amcore.h index 595bd57a7f..b9fc5b5d08 100644 --- a/include/configs/amcore.h +++ b/include/configs/amcore.h @@ -9,7 +9,6 @@ #ifndef __AMCORE_CONFIG_H #define __AMCORE_CONFIG_H -#define CONFIG_AMCORE #define CONFIG_HOSTNAME AMCORE #define CONFIG_MCFTMR diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index ceab037cc1..540db79a27 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -39,8 +39,6 @@ #error No card type defined! #endif -#define CONFIG_ASTRO5373L /* define board type */ - /* Command line configuration */ /* * CONFIG_RAM defines if u-boot is loaded via BDM (or started from diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h index 75ca1ff2f6..cefadc1e81 100644 --- a/include/configs/stmark2.h +++ b/include/configs/stmark2.h @@ -9,7 +9,6 @@ #ifndef __STMARK2_CONFIG_H #define __STMARK2_CONFIG_H -#define CONFIG_STMARK2 #define CONFIG_HOSTNAME stmark2 #define CONFIG_MCFUART diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 4d47b5cfa5..a3cc86c16f 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -29,7 +29,6 @@ CONFIG_AM335X_USB0_MODE CONFIG_AM335X_USB1 CONFIG_AM335X_USB1_MODE CONFIG_AM437X_USB2PHY2_HOST -CONFIG_AMCORE CONFIG_ANDES_PCU CONFIG_ANDES_PCU_BASE CONFIG_APBH_DMA @@ -71,7 +70,6 @@ CONFIG_ARM_PL180_MMCI_BASE CONFIG_ARM_PL180_MMCI_CLOCK_FREQ CONFIG_ARM_THUMB CONFIG_ARP_TIMEOUT -CONFIG_ASTRO5373L CONFIG_ASTRO_COFDMDUOS2 CONFIG_ASTRO_TWIN7S2 CONFIG_ASTRO_V512 @@ -1263,12 +1261,7 @@ CONFIG_LSXHL CONFIG_LYNXKDI CONFIG_M41T94_SPI_CS CONFIG_M520x -CONFIG_M52277EVB -CONFIG_M5253DEMO -CONFIG_M5253EVBE -CONFIG_M5275EVB CONFIG_M5301x -CONFIG_M54418TWR CONFIG_M54451EVB CONFIG_M54455EVB CONFIG_MACB0_PHY @@ -2133,7 +2126,6 @@ CONFIG_STM32_GPIO CONFIG_STM32_HSE_HZ CONFIG_STM32_HZ CONFIG_STM32_SERIAL -CONFIG_STMARK2 CONFIG_STRIDER CONFIG_STRIDER_CON CONFIG_STRIDER_CON_DP -- 2.15.0

2 1

[U-Boot] [PATCH] nds32: Drop unreferenced CONFIG_ADP_AG101P
by Tuomas Tynkkynen 19 Jan '18

19 Jan '18

Seems to be again one of those CONFIG_ symbols named after a board, with nothing referencing it. Signed-off-by: Tuomas Tynkkynen <tuomas(a)tuxera.com> --- include/configs/adp-ag101p.h | 2 -- scripts/config_whitelist.txt | 1 - 2 files changed, 3 deletions(-) diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h index f2de384631..f83659373e 100644 --- a/include/configs/adp-ag101p.h +++ b/include/configs/adp-ag101p.h @@ -14,8 +14,6 @@ /* * CPU and Board Configuration Options */ -#define CONFIG_ADP_AG101P - #define CONFIG_USE_INTERRUPT #define CONFIG_SKIP_LOWLEVEL_INIT diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index f5ae1597c3..a3cc86c16f 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -18,7 +18,6 @@ CONFIG_ADDRESS CONFIG_ADDR_AUTO_INCR_BIT CONFIG_ADDR_MAP CONFIG_ADNPESC1 -CONFIG_ADP_AG101P CONFIG_AEABI CONFIG_AEMIF_CNTRL_BASE CONFIG_ALTERA_SPI_IDLE_VAL -- 2.15.0

2 1

[U-Boot] [PATCH] pcmcia: Drop a bunch of unused CONFIG_SYS_PCMCIA_ macros
by Tuomas Tynkkynen 19 Jan '18

19 Jan '18

Last users of the following macros (for n = 0..7) were removed in commit 5b8e76c35ec312a ("powerpc, 8xx: remove support for 8xx"): CONFIG_SYS_PCMCIA_PBRn CONFIG_SYS_PCMCIA_PORn Signed-off-by: Tuomas Tynkkynen <tuomas(a)tuxera.com> --- include/pcmcia.h | 109 ------------------------------------------- scripts/config_whitelist.txt | 16 ------- 2 files changed, 125 deletions(-) diff --git a/include/pcmcia.h b/include/pcmcia.h index 94b54c210d..8df90ee2b7 100644 --- a/include/pcmcia.h +++ b/include/pcmcia.h @@ -60,115 +60,6 @@ typedef struct { ulong or; } pcmcia_win_t; -/* - * Definitions for PCMCIA control registers to operate in IDE mode - * - * All timing related setup (PCMCIA_SHT, PCMCIA_SST, PCMCIA_SL) - * to be done later (depending on CPU clock) - */ - -/* Window 0: - * Base: 0xFE100000 CS1 - * Port Size: 2 Bytes - * Port Size: 16 Bit - * Common Memory Space - */ - -#define CONFIG_SYS_PCMCIA_PBR0 0xFE100000 -#define CONFIG_SYS_PCMCIA_POR0 ( PCMCIA_BSIZE_2 \ - | PCMCIA_PPS_16 \ - | PCMCIA_PRS_MEM \ - | PCMCIA_SLOT_x \ - | PCMCIA_PV \ - ) - -/* Window 1: - * Base: 0xFE100080 CS1 - * Port Size: 8 Bytes - * Port Size: 8 Bit - * Common Memory Space - */ - -#define CONFIG_SYS_PCMCIA_PBR1 0xFE100080 -#define CONFIG_SYS_PCMCIA_POR1 ( PCMCIA_BSIZE_8 \ - | PCMCIA_PPS_8 \ - | PCMCIA_PRS_MEM \ - | PCMCIA_SLOT_x \ - | PCMCIA_PV \ - ) - -/* Window 2: - * Base: 0xFE100100 CS2 - * Port Size: 8 Bytes - * Port Size: 8 Bit - * Common Memory Space - */ - -#define CONFIG_SYS_PCMCIA_PBR2 0xFE100100 -#define CONFIG_SYS_PCMCIA_POR2 ( PCMCIA_BSIZE_8 \ - | PCMCIA_PPS_8 \ - | PCMCIA_PRS_MEM \ - | PCMCIA_SLOT_x \ - | PCMCIA_PV \ - ) - -/* Window 3: - * not used - */ -#define CONFIG_SYS_PCMCIA_PBR3 0 -#define CONFIG_SYS_PCMCIA_POR3 0 - -/* Window 4: - * Base: 0xFE100C00 CS1 - * Port Size: 2 Bytes - * Port Size: 16 Bit - * Common Memory Space - */ - -#define CONFIG_SYS_PCMCIA_PBR4 0xFE100C00 -#define CONFIG_SYS_PCMCIA_POR4 ( PCMCIA_BSIZE_2 \ - | PCMCIA_PPS_16 \ - | PCMCIA_PRS_MEM \ - | PCMCIA_SLOT_x \ - | PCMCIA_PV \ - ) - -/* Window 5: - * Base: 0xFE100C80 CS1 - * Port Size: 8 Bytes - * Port Size: 8 Bit - * Common Memory Space - */ - -#define CONFIG_SYS_PCMCIA_PBR5 0xFE100C80 -#define CONFIG_SYS_PCMCIA_POR5 ( PCMCIA_BSIZE_8 \ - | PCMCIA_PPS_8 \ - | PCMCIA_PRS_MEM \ - | PCMCIA_SLOT_x \ - | PCMCIA_PV \ - ) - -/* Window 6: - * Base: 0xFE100D00 CS2 - * Port Size: 8 Bytes - * Port Size: 8 Bit - * Common Memory Space - */ - -#define CONFIG_SYS_PCMCIA_PBR6 0xFE100D00 -#define CONFIG_SYS_PCMCIA_POR6 ( PCMCIA_BSIZE_8 \ - | PCMCIA_PPS_8 \ - | PCMCIA_PRS_MEM \ - | PCMCIA_SLOT_x \ - | PCMCIA_PV \ - ) - -/* Window 7: - * not used - */ -#define CONFIG_SYS_PCMCIA_PBR7 0 -#define CONFIG_SYS_PCMCIA_POR7 0 - /**********************************************************************/ /* diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 22dc663cda..a3cc86c16f 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -4157,22 +4157,6 @@ CONFIG_SYS_PCMCIA_ATTR_BASE CONFIG_SYS_PCMCIA_IO_BASE CONFIG_SYS_PCMCIA_MEM_ADDR CONFIG_SYS_PCMCIA_MEM_SIZE -CONFIG_SYS_PCMCIA_PBR0 -CONFIG_SYS_PCMCIA_PBR1 -CONFIG_SYS_PCMCIA_PBR2 -CONFIG_SYS_PCMCIA_PBR3 -CONFIG_SYS_PCMCIA_PBR4 -CONFIG_SYS_PCMCIA_PBR5 -CONFIG_SYS_PCMCIA_PBR6 -CONFIG_SYS_PCMCIA_PBR7 -CONFIG_SYS_PCMCIA_POR0 -CONFIG_SYS_PCMCIA_POR1 -CONFIG_SYS_PCMCIA_POR2 -CONFIG_SYS_PCMCIA_POR3 -CONFIG_SYS_PCMCIA_POR4 -CONFIG_SYS_PCMCIA_POR5 -CONFIG_SYS_PCMCIA_POR6 -CONFIG_SYS_PCMCIA_POR7 CONFIG_SYS_PDCNT CONFIG_SYS_PEHLPAR CONFIG_SYS_PEPAR -- 2.15.0

2 1

[U-Boot] [PATCH v2 0/4] ARM: Extend qemu_arm to support ARM64
by Tuomas Tynkkynen 19 Jan '18

19 Jan '18

Changes in v2: - Remove references to setting ARCH from the documentation - Add Reviewed-by to the other 3 batches Hi, This series extends qemu_arm to have support for ARM64 as well. Adding test.py support for it gets us the first test.py job for an ARM64 board on Travis-CI. The corresponding changes in the uboot-test-hook repository have already been merged but for reference they were in: https://github.com/swarren/uboot-test-hooks/pull/15 Tuomas Tynkkynen (4): ARM: qemu-arm: Add support for AArch64 ARM: Document AArch64 version of qemu-arm Travis-CI: Download ARM64 version of GRUB as well Travis-CI: Add job for running test.py on qemu_arm64 .travis.yml | 8 +++++ arch/arm/Kconfig | 2 -- arch/arm/mach-qemu/Kconfig | 11 +++++++ board/emulation/qemu-arm/MAINTAINERS | 1 + board/emulation/qemu-arm/qemu-arm.c | 35 ++++++++++++++++++++++ .../{qemu_arm_defconfig => qemu_arm64_defconfig} | 1 + configs/qemu_arm_defconfig | 1 + doc/README.qemu-arm | 21 +++++++++---- 8 files changed, 73 insertions(+), 7 deletions(-) copy configs/{qemu_arm_defconfig => qemu_arm64_defconfig} (94%) -- 2.15.0

3 12