January 2018 - U-Boot

[U-Boot] [PATCH v4 1/1] efi_selftest: test start image
by Heinrich Schuchardt 19 Jan '18

19 Jan '18

This pair of tests checks the StartImage boot service. Each test loads an EFI application into memory and starts it. One returns by calling the Exit boot service. The other returns directly. The tests are not built on x86_64 because the relocation code for the efi binary cannot be created. Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- This patch was originally in a patch series. But the first patch was already accepted by Alex. v4 Use EFI_ST_FAILURE if an error occurs (instead of EFI_INCOMPATIBLE_VERSION). v3 Supply two separate unit tests covering that the application either returns by calling the Exit service or with a simple return. v2 Do not build test on x86_64. --- arch/arm/lib/Makefile | 1 + lib/efi_selftest/.gitignore | 2 + lib/efi_selftest/Makefile | 35 +++++ lib/efi_selftest/efi_selftest_miniapp_exit.c | 37 ++++++ lib/efi_selftest/efi_selftest_miniapp_return.c | 32 +++++ lib/efi_selftest/efi_selftest_startimage_exit.c | 149 ++++++++++++++++++++++ lib/efi_selftest/efi_selftest_startimage_return.c | 149 ++++++++++++++++++++++ 7 files changed, 405 insertions(+) create mode 100644 lib/efi_selftest/.gitignore create mode 100644 lib/efi_selftest/efi_selftest_miniapp_exit.c create mode 100644 lib/efi_selftest/efi_selftest_miniapp_return.c create mode 100644 lib/efi_selftest/efi_selftest_startimage_exit.c create mode 100644 lib/efi_selftest/efi_selftest_startimage_return.c diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index abffa10c85..876024fc15 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -112,4 +112,5 @@ CFLAGS_$(EFI_RELOC) := $(CFLAGS_EFI) CFLAGS_REMOVE_$(EFI_RELOC) := $(CFLAGS_NON_EFI) extra-$(CONFIG_CMD_BOOTEFI_HELLO_COMPILE) += $(EFI_CRT0) $(EFI_RELOC) +extra-$(CONFIG_CMD_BOOTEFI_SELFTEST) += $(EFI_CRT0) $(EFI_RELOC) extra-$(CONFIG_EFI) += $(EFI_CRT0) $(EFI_RELOC) diff --git a/lib/efi_selftest/.gitignore b/lib/efi_selftest/.gitignore new file mode 100644 index 0000000000..c527e464e5 --- /dev/null +++ b/lib/efi_selftest/.gitignore @@ -0,0 +1,2 @@ +efi_miniapp_file_image.h +*.efi diff --git a/lib/efi_selftest/Makefile b/lib/efi_selftest/Makefile index 20f614d6ba..90246f7827 100644 --- a/lib/efi_selftest/Makefile +++ b/lib/efi_selftest/Makefile @@ -7,6 +7,9 @@ # This file only gets included with CONFIG_EFI_LOADER set, so all # object inclusion implicitly depends on it +CFLAGS_efi_selftest_miniapp.o := $(CFLAGS_EFI) -Os -ffreestanding +CFLAGS_REMOVE_efi_selftest_miniapp.o := $(CFLAGS_NON_EFI) -Os + obj-$(CONFIG_CMD_BOOTEFI_SELFTEST) += \ efi_selftest.o \ efi_selftest_controllers.o \ @@ -25,3 +28,35 @@ efi_selftest_watchdog.o ifeq ($(CONFIG_BLK)$(CONFIG_PARTITIONS),yy) obj-$(CONFIG_CMD_BOOTEFI_SELFTEST) += efi_selftest_block_device.o endif + +# TODO: As of v2018.01 the relocation code for the EFI application cannot +# be built on x86_64. +ifeq ($(CONFIG_X86_64),) + +ifneq ($(CONFIG_CMD_BOOTEFI_SELFTEST),) + +obj-y += \ +efi_selftest_startimage_exit.o \ +efi_selftest_startimage_return.o + +targets += \ +efi_miniapp_file_image_exit.h \ +efi_miniapp_file_image_return.h \ +efi_selftest_miniapp_exit.efi \ +efi_selftest_miniapp_return.efi + +$(obj)/efi_miniapp_file_image_exit.h: $(obj)/efi_selftest_miniapp_exit.efi + $(obj)/../../tools/file2include $(obj)/efi_selftest_miniapp_exit.efi > \ + $(obj)/efi_miniapp_file_image_exit.h + +$(obj)/efi_miniapp_file_image_return.h: $(obj)/efi_selftest_miniapp_return.efi + $(obj)/../../tools/file2include $(obj)/efi_selftest_miniapp_return.efi > \ + $(obj)/efi_miniapp_file_image_return.h + +$(obj)/efi_selftest_startimage_exit.o: $(obj)/efi_miniapp_file_image_exit.h + +$(obj)/efi_selftest_startimage_return.o: $(obj)/efi_miniapp_file_image_return.h + +endif + +endif diff --git a/lib/efi_selftest/efi_selftest_miniapp_exit.c b/lib/efi_selftest/efi_selftest_miniapp_exit.c new file mode 100644 index 0000000000..590c948a1c --- /dev/null +++ b/lib/efi_selftest/efi_selftest_miniapp_exit.c @@ -0,0 +1,37 @@ +/* + * efi_selftest_miniapp_exit + * + * Copyright (c) 2018 Heinrich Schuchardt + * + * SPDX-License-Identifier: GPL-2.0+ + * + * This EFI application is run by the StartImage selftest. + * It uses the Exit boot service to return. + */ + +#include <common.h> +#include <efi_api.h> + +/* + * Entry point of the EFI application. + * + * @handle handle of the loaded image + * @systable system table + * @return status code + */ +efi_status_t EFIAPI efi_main(efi_handle_t handle, + struct efi_system_table *systable) +{ + struct efi_simple_text_output_protocol *con_out = systable->con_out; + + con_out->output_string(con_out, L"EFI application calling Exit"); + + /* The return value is checked by the calling test */ + systable->boottime->exit(handle, EFI_UNSUPPORTED, 0, NULL); + + /* + * This statement should not be reached. + * To enable testing use a different return value. + */ + return EFI_SUCCESS; +} diff --git a/lib/efi_selftest/efi_selftest_miniapp_return.c b/lib/efi_selftest/efi_selftest_miniapp_return.c new file mode 100644 index 0000000000..e5d3979b03 --- /dev/null +++ b/lib/efi_selftest/efi_selftest_miniapp_return.c @@ -0,0 +1,32 @@ +/* + * efi_selftest_miniapp_return + * + * Copyright (c) 2018 Heinrich Schuchardt + * + * SPDX-License-Identifier: GPL-2.0+ + * + * This EFI application is run by the StartImage selftest. + * It returns directly without calling the Exit boot service. + */ + +#include <common.h> +#include <efi_api.h> + +/* + * Entry point of the EFI application. + * + * @handle handle of the loaded image + * @systable system table + * @return status code + */ +efi_status_t EFIAPI efi_main(efi_handle_t handle, + struct efi_system_table *systable) +{ + struct efi_simple_text_output_protocol *con_out = systable->con_out; + + con_out->output_string(con_out, + L"EFI application returning w/o calling Exit"); + + /* The return value is checked by the calling test */ + return EFI_INCOMPATIBLE_VERSION; +} diff --git a/lib/efi_selftest/efi_selftest_startimage_exit.c b/lib/efi_selftest/efi_selftest_startimage_exit.c new file mode 100644 index 0000000000..0809690e97 --- /dev/null +++ b/lib/efi_selftest/efi_selftest_startimage_exit.c @@ -0,0 +1,149 @@ +/* + * efi_selftest_start_image + * + * Copyright (c) 2018 Heinrich Schuchardt <xypron.glpk(a)gmx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * This test checks the StartImage boot service. + * The efi_selftest_miniapp_exit.efi application is loaded into memory + * and started. + */ + +#include <efi_selftest.h> +/* Include containing the miniapp.efi application */ +#include "efi_miniapp_file_image_exit.h" + +/* Block size of compressed disk image */ +#define COMPRESSED_DISK_IMAGE_BLOCK_SIZE 8 + +/* Binary logarithm of the block size */ +#define LB_BLOCK_SIZE 9 + +static efi_handle_t image_handle; +static struct efi_boot_services *boottime; + +/* One 8 byte block of the compressed disk image */ +struct line { + size_t addr; + char *line; +}; + +/* Compressed file image */ +struct compressed_file_image { + size_t length; + struct line lines[]; +}; + +static struct compressed_file_image img = EFI_ST_DISK_IMG; + +/* Decompressed file image */ +static u8 *image; + +/* + * Decompress the disk image. + * + * @image decompressed disk image + * @return status code + */ +static efi_status_t decompress(u8 **image) +{ + u8 *buf; + size_t i; + size_t addr; + size_t len; + efi_status_t ret; + + ret = boottime->allocate_pool(EFI_LOADER_DATA, img.length, + (void **)&buf); + if (ret != EFI_SUCCESS) { + efi_st_error("Out of memory\n"); + return ret; + } + boottime->set_mem(buf, img.length, 0); + + for (i = 0; ; ++i) { + if (!img.lines[i].line) + break; + addr = img.lines[i].addr; + len = COMPRESSED_DISK_IMAGE_BLOCK_SIZE; + if (addr + len > img.length) + len = img.length - addr; + boottime->copy_mem(buf + addr, img.lines[i].line, len); + } + *image = buf; + return ret; +} + +/* + * Setup unit test. + * + * @handle: handle of the loaded image + * @systable: system table + * @return: EFI_ST_SUCCESS for success + */ +static int setup(const efi_handle_t handle, + const struct efi_system_table *systable) +{ + image_handle = handle; + boottime = systable->boottime; + + /* Load the application image into memory */ + decompress(&image); + + return EFI_ST_SUCCESS; +} + +/* + * Tear down unit test. + * + * @return: EFI_ST_SUCCESS for success + */ +static int teardown(void) +{ + efi_status_t r = EFI_ST_SUCCESS; + + if (image) { + r = efi_free_pool(image); + if (r != EFI_SUCCESS) { + efi_st_error("Failed to free image\n"); + return EFI_ST_FAILURE; + } + } + return r; +} + +/* + * Execute unit test. + * + * Load and start the application image. + * + * @return: EFI_ST_SUCCESS for success + */ +static int execute(void) +{ + efi_status_t ret; + efi_handle_t handle; + + ret = boottime->load_image(false, image_handle, NULL, image, + img.length, &handle); + if (ret != EFI_SUCCESS) { + efi_st_error("Failed to load image\n"); + return EFI_ST_FAILURE; + } + ret = boottime->start_image(handle, NULL, NULL); + if (ret != EFI_UNSUPPORTED) { + efi_st_error("Wrong return value from application\n"); + return EFI_ST_FAILURE; + } + + return EFI_ST_SUCCESS; +} + +EFI_UNIT_TEST(startimage_exit) = { + .name = "start image exit", + .phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT, + .setup = setup, + .execute = execute, + .teardown = teardown, +}; diff --git a/lib/efi_selftest/efi_selftest_startimage_return.c b/lib/efi_selftest/efi_selftest_startimage_return.c new file mode 100644 index 0000000000..2209911457 --- /dev/null +++ b/lib/efi_selftest/efi_selftest_startimage_return.c @@ -0,0 +1,149 @@ +/* + * efi_selftest_start_image + * + * Copyright (c) 2018 Heinrich Schuchardt <xypron.glpk(a)gmx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * This test checks the StartImage boot service. + * The efi_selftest_miniapp_return.efi application is loaded into memory + * and started. + */ + +#include <efi_selftest.h> +/* Include containing the miniapp.efi application */ +#include "efi_miniapp_file_image_return.h" + +/* Block size of compressed disk image */ +#define COMPRESSED_DISK_IMAGE_BLOCK_SIZE 8 + +/* Binary logarithm of the block size */ +#define LB_BLOCK_SIZE 9 + +static efi_handle_t image_handle; +static struct efi_boot_services *boottime; + +/* One 8 byte block of the compressed disk image */ +struct line { + size_t addr; + char *line; +}; + +/* Compressed file image */ +struct compressed_file_image { + size_t length; + struct line lines[]; +}; + +static struct compressed_file_image img = EFI_ST_DISK_IMG; + +/* Decompressed file image */ +static u8 *image; + +/* + * Decompress the disk image. + * + * @image decompressed disk image + * @return status code + */ +static efi_status_t decompress(u8 **image) +{ + u8 *buf; + size_t i; + size_t addr; + size_t len; + efi_status_t ret; + + ret = boottime->allocate_pool(EFI_LOADER_DATA, img.length, + (void **)&buf); + if (ret != EFI_SUCCESS) { + efi_st_error("Out of memory\n"); + return ret; + } + boottime->set_mem(buf, img.length, 0); + + for (i = 0; ; ++i) { + if (!img.lines[i].line) + break; + addr = img.lines[i].addr; + len = COMPRESSED_DISK_IMAGE_BLOCK_SIZE; + if (addr + len > img.length) + len = img.length - addr; + boottime->copy_mem(buf + addr, img.lines[i].line, len); + } + *image = buf; + return ret; +} + +/* + * Setup unit test. + * + * @handle: handle of the loaded image + * @systable: system table + * @return: EFI_ST_SUCCESS for success + */ +static int setup(const efi_handle_t handle, + const struct efi_system_table *systable) +{ + image_handle = handle; + boottime = systable->boottime; + + /* Load the application image into memory */ + decompress(&image); + + return EFI_ST_SUCCESS; +} + +/* + * Tear down unit test. + * + * @return: EFI_ST_SUCCESS for success + */ +static int teardown(void) +{ + efi_status_t r = EFI_ST_SUCCESS; + + if (image) { + r = efi_free_pool(image); + if (r != EFI_SUCCESS) { + efi_st_error("Failed to free image\n"); + return EFI_ST_FAILURE; + } + } + return r; +} + +/* + * Execute unit test. + * + * Load and start the application image. + * + * @return: EFI_ST_SUCCESS for success + */ +static int execute(void) +{ + efi_status_t ret; + efi_handle_t handle; + + ret = boottime->load_image(false, image_handle, NULL, image, + img.length, &handle); + if (ret != EFI_SUCCESS) { + efi_st_error("Failed to load image\n"); + return EFI_ST_FAILURE; + } + ret = boottime->start_image(handle, NULL, NULL); + if (ret != EFI_INCOMPATIBLE_VERSION) { + efi_st_error("Wrong return value from application\n"); + return EFI_ST_FAILURE; + } + + return EFI_ST_SUCCESS; +} + +EFI_UNIT_TEST(startimage) = { + .name = "start image return", + .phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT, + .setup = setup, + .execute = execute, + .teardown = teardown, +}; -- 2.15.1

1 0

[U-Boot] [PATCH v3 00/16] efi_loader: implement driver management
by Heinrich Schuchardt 19 Jan '18

19 Jan '18

This series implements the OpenProtocolInformation, ConnectController, and DisconnectController boot services. The EFI application creating a new device will call ConnectController to request the installation of all necessary drivers. Before deleting the device it will call DisconectController to remove all child controllers and to detach the driver. E.g. iPXE may be used to connect an iSCSI target. It then creates a handle by installing the EFI_BLOCK_IO_PROTOCOL. It calls ConnectController and expects U-Boot to create the partition handles and to provide the EFI_SIMPLE_FILE_SYSTEM_PROTOCOL. (The driver connecting to the EFI_BLOCK_IO_PROTOCOL is not yet implemented in U-Boot.) A self test is provided for the driver management. The bootefi selftest now creates colored output. Two bug fixes are included. To complete the implementation of the EFI boot services the following future work is needed: * manage events in a linked list (see Rob's proposal) * implement ReinstallProtocol and RegisterProtocolNotify --- v3: Add more comments to code. Avoid memory leak when debug printing device path. v2: Clean up debug output in efi_add_protocol (patch 8). Correctly return EFI_NOT_FOUND if no driver is uninstalled in DisconnectController (patch 11). Define a local structure as static (patch 15). Heinrich Schuchardt (16): efi_selftest: colored test output efi_loader: simplify efi_remove_all_protocols efi_selftest: do not try to close device path protocol efi_loader: list of open protocol infos efi_loader: open_info in OpenProtocol efi_loader: open_info in CloseProtocol efi_loader: implement OpenProtocolInformation efi_loader: debug output installed device path efi_loader: implement ConnectController efi_loader: fix signature of efi_disconnect_controller efi_loader: implement DisconnectController efi_loader: disconnect controllers in UninstallProtocol efi_selftest: remove todo in manage protocols efi_selftest: remove todo in device path test efi_selftest: test for (Dis)ConnectController efi_loader: consistently use efi_handle_t for handles cmd/bootefi.c | 10 +- include/efi_api.h | 48 +- include/efi_loader.h | 38 +- include/efi_selftest.h | 27 +- lib/efi_loader/efi_boottime.c | 763 +++++++++++++++++++++--- lib/efi_loader/efi_console.c | 6 +- lib/efi_selftest/Makefile | 1 + lib/efi_selftest/efi_selftest.c | 25 +- lib/efi_selftest/efi_selftest_console.c | 13 +- lib/efi_selftest/efi_selftest_controllers.c | 385 ++++++++++++ lib/efi_selftest/efi_selftest_devicepath.c | 48 +- lib/efi_selftest/efi_selftest_manageprotocols.c | 22 +- 12 files changed, 1219 insertions(+), 167 deletions(-) create mode 100644 lib/efi_selftest/efi_selftest_controllers.c -- 2.14.2

3 21

[U-Boot] using raw eMMC
by Bishop, Mark (STRT) 19 Jan '18

19 Jan '18

U-Boot is in QSPI which I don't want to change but I have a eMMC device that holds the kernel and rootfs. Is it possible to treat the eMMC as a raw device and just dd the FIT image into an address or offset on the device and then have uboot load it. Looking to use cramfs/squashfs or maybe jffs, but not sure if jffs on top of eMMC is desirable.

1 0

[U-Boot] [PATCH] ARC: devboards: Allow huge uImages (up to 128 MiB)
by Alexey Brodkin 19 Jan '18

19 Jan '18

Even though in production uImage usually is quite small as it contains just Linux kernel image during development it might be pretty convenient to have root-FS built into the same image. That makes uImage much larger but given on our dev platforms we have quite a lot of DDR (> 512 MiB) we may afford loading huge uImages. Signed-off-by: Alexey Brodkin <abrodkin(a)synopsys.com> --- include/configs/axs10x.h | 2 +- include/configs/hsdk.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/configs/axs10x.h b/include/configs/axs10x.h index 29c595970a22..a9c4d1ab2365 100644 --- a/include/configs/axs10x.h +++ b/include/configs/axs10x.h @@ -29,7 +29,7 @@ (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MALLOC_LEN SZ_2M -#define CONFIG_SYS_BOOTM_LEN SZ_32M +#define CONFIG_SYS_BOOTM_LEN SZ_128M #define CONFIG_SYS_LOAD_ADDR 0x82000000 /* diff --git a/include/configs/hsdk.h b/include/configs/hsdk.h index cdc1b2e36586..8d5e89b6fdd7 100644 --- a/include/configs/hsdk.h +++ b/include/configs/hsdk.h @@ -29,7 +29,7 @@ (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MALLOC_LEN SZ_2M -#define CONFIG_SYS_BOOTM_LEN SZ_32M +#define CONFIG_SYS_BOOTM_LEN SZ_128M #define CONFIG_SYS_LOAD_ADDR 0x82000000 /* -- 2.14.3

1 0

[U-Boot] [PATCH] boston: Pad binary in .mcs to a multiple of 16 bytes
by Paul Burton 19 Jan '18

19 Jan '18

When flashing U-Boot on a Boston board using Xilinx Vivado tools, the final 0x00 byte which ends the .relocs section seems to be skipped & left in flash as 0xff unless the data contained in the .mcs is padded out to a 16 byte boundary. Without our final zero byte relocation will fail with an error about a spurious reloc: Avoid this problem by padding out the data in the .mcs file to a 16 byte boundary using srec_cat's -range-pad functionality. Signed-off-by: Paul Burton <paul.burton(a)mips.com> Cc: Daniel Schwierzeck <daniel.schwierzeck(a)gmail.com> --- board/imgtec/boston/config.mk | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/board/imgtec/boston/config.mk b/board/imgtec/boston/config.mk index 2775727744..0ba8802da0 100644 --- a/board/imgtec/boston/config.mk +++ b/board/imgtec/boston/config.mk @@ -3,7 +3,10 @@ # quiet_cmd_srec_cat = SRECCAT $@ - cmd_srec_cat = srec_cat -output $@ -$2 $< -binary -offset $3 + cmd_srec_cat = srec_cat -output $@ -$2 \ + $< -binary \ + -fill 0x00 -within $< -binary -range-pad 16 \ + -offset $3 u-boot.mcs: u-boot.bin $(call cmd,srec_cat,intel,0x7c00000) -- 2.15.1

2 1

[U-Boot] [PATCH] armv8: ls1088a: Move CONFIG_BOOTARGS and CONFIG_CMD_GREPENV to defconfig
by Ashish Kumar 19 Jan '18

19 Jan '18

Signed-off-by: Ashish Kumar <Ashish.Kumar(a)nxp.com> --- configs/ls1088aqds_defconfig | 3 +++ configs/ls1088aqds_qspi_SECURE_BOOT_defconfig | 3 +++ configs/ls1088aqds_qspi_defconfig | 3 +++ configs/ls1088aqds_sdcard_ifc_defconfig | 3 +++ configs/ls1088aqds_sdcard_qspi_defconfig | 3 +++ configs/ls1088ardb_qspi_SECURE_BOOT_defconfig | 3 +++ configs/ls1088ardb_qspi_defconfig | 3 +++ configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 3 +++ configs/ls1088ardb_sdcard_qspi_defconfig | 3 +++ include/configs/ls1088a_common.h | 5 ----- 10 files changed, 27 insertions(+), 5 deletions(-) diff --git a/configs/ls1088aqds_defconfig b/configs/ls1088aqds_defconfig index 5624595..323f89d 100644 --- a/configs/ls1088aqds_defconfig +++ b/configs/ls1088aqds_defconfig @@ -9,6 +9,9 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" +CONFIG_CMD_GREPENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y diff --git a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig index e464951..eba112a 100644 --- a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig @@ -3,6 +3,9 @@ CONFIG_TARGET_LS1088AQDS=y CONFIG_SECURE_BOOT=y CONFIG_FSL_LS_PPA=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" +CONFIG_CMD_GREPENV=y # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y diff --git a/configs/ls1088aqds_qspi_defconfig b/configs/ls1088aqds_qspi_defconfig index 1e368d7..a93c60c 100644 --- a/configs/ls1088aqds_qspi_defconfig +++ b/configs/ls1088aqds_qspi_defconfig @@ -8,6 +8,9 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT" # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" +CONFIG_CMD_GREPENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/ls1088aqds_sdcard_ifc_defconfig b/configs/ls1088aqds_sdcard_ifc_defconfig index 5f175f8..69adffd 100644 --- a/configs/ls1088aqds_sdcard_ifc_defconfig +++ b/configs/ls1088aqds_sdcard_ifc_defconfig @@ -14,6 +14,9 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" CONFIG_SD_BOOT=y # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_USE_BOOTCOMMAND is not set +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" +CONFIG_CMD_GREPENV=y CONFIG_SPL=y CONFIG_SPL_BUILD=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y diff --git a/configs/ls1088aqds_sdcard_qspi_defconfig b/configs/ls1088aqds_sdcard_qspi_defconfig index b6de10c..3fc9354 100644 --- a/configs/ls1088aqds_sdcard_qspi_defconfig +++ b/configs/ls1088aqds_sdcard_qspi_defconfig @@ -13,6 +13,9 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT_QSPI" CONFIG_SD_BOOT=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" +CONFIG_CMD_GREPENV=y CONFIG_SPL=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 diff --git a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig index 19c76b6..812a9a6 100644 --- a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig @@ -3,6 +3,9 @@ CONFIG_TARGET_LS1088ARDB=y CONFIG_SECURE_BOOT=y CONFIG_FSL_LS_PPA=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb" +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" +CONFIG_CMD_GREPENV=y CONFIG_DISTRO_DEFAULTS=y # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT_VERBOSE=y diff --git a/configs/ls1088ardb_qspi_defconfig b/configs/ls1088ardb_qspi_defconfig index 8a08846..4ec755a 100644 --- a/configs/ls1088ardb_qspi_defconfig +++ b/configs/ls1088ardb_qspi_defconfig @@ -10,6 +10,9 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT" # CONFIG_USE_BOOTCOMMAND is not set # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" +CONFIG_CMD_GREPENV=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig index a4afbb5..d2ff299 100644 --- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig @@ -16,6 +16,9 @@ CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT_QSPI" CONFIG_SD_BOOT=y # CONFIG_USE_BOOTCOMMAND is not set # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" +CONFIG_CMD_GREPENV=y CONFIG_SPL=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 diff --git a/configs/ls1088ardb_sdcard_qspi_defconfig b/configs/ls1088ardb_sdcard_qspi_defconfig index 2f8c097..d6a5ad3 100644 --- a/configs/ls1088ardb_sdcard_qspi_defconfig +++ b/configs/ls1088ardb_sdcard_qspi_defconfig @@ -15,6 +15,9 @@ CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT_QSPI" CONFIG_SD_BOOT=y # CONFIG_USE_BOOTCOMMAND is not set # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" +CONFIG_CMD_GREPENV=y CONFIG_SPL=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 61c30c9..1178fec 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -166,7 +166,6 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024) #endif /* Command line configuration */ -#define CONFIG_CMD_GREPENV #define CONFIG_CMD_CACHE /* Miscellaneous configurable options */ @@ -213,10 +212,6 @@ unsigned long long get_qixis_addr(void); "mcinitcmd=fsl_mc start mc 0x580a00000" \ " 0x580e00000 \0" -#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ - "earlycon=uart8250,mmio,0x21c0500 " \ - "ramdisk_size=0x3000000 default_hugepagesz=2m" \ - " hugepagesz=2m hugepages=256" #if defined(CONFIG_QSPI_BOOT) #define CONFIG_BOOTCOMMAND "sf probe 0:0;" \ "sf read 0x80200000 0xd00000 0x100000;"\ -- 2.7.4

1 0

[U-Boot] [PATCH RFC] sandbox: Add 64-bit sandbox
by Mario Six 19 Jan '18

19 Jan '18

From: Mario Six <six(a)gdsys.cc> To debug device tree issues involving 32- and 64-bit platforms, it is useful to have a generic 64-bit platform available. Add a version of the sandbox that uses 64-bit integers for its physical addresses as well as a modified device tree. Signed-off-by: Mario Six <mario.six(a)gdsys.cc> --- arch/sandbox/Kconfig | 6 + arch/sandbox/cpu/cpu.c | 2 +- arch/sandbox/dts/Makefile | 4 + arch/sandbox/dts/sandbox64.dts | 317 +++++++++++++++++++++++++++++++++++++++ arch/sandbox/include/asm/io.h | 6 + arch/sandbox/include/asm/types.h | 14 +- cmd/demo.c | 6 +- configs/sandbox64_defconfig | 200 ++++++++++++++++++++++++ drivers/demo/demo-simple.c | 2 +- 9 files changed, 550 insertions(+), 7 deletions(-) create mode 100644 arch/sandbox/dts/sandbox64.dts create mode 100644 configs/sandbox64_defconfig diff --git a/arch/sandbox/Kconfig b/arch/sandbox/Kconfig index 87418e3986..be001604aa 100644 --- a/arch/sandbox/Kconfig +++ b/arch/sandbox/Kconfig @@ -10,6 +10,11 @@ config SYS_BOARD config SYS_CPU default "sandbox" +config SANDBOX64 + bool "Use 64-bit addresses" + select PHYS_64BIT + select SANDBOX_64BIT + config SANDBOX_SPL bool "Enable SPL for sandbox" select SUPPORT_SPL @@ -29,6 +34,7 @@ choice config SANDBOX_32BIT bool "32-bit host" + depends on !SANDBOX64 config SANDBOX_64BIT bool "64-bit host" diff --git a/arch/sandbox/cpu/cpu.c b/arch/sandbox/cpu/cpu.c index 66c3a6a88a..4a20fde787 100644 --- a/arch/sandbox/cpu/cpu.c +++ b/arch/sandbox/cpu/cpu.c @@ -76,7 +76,7 @@ void *map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) if (enable_pci_map && !pci_map_physmem(paddr, &len, &map_dev, &ptr)) { if (plen != len) { printf("%s: Warning: partial map at %x, wanted %lx, got %lx\n", - __func__, paddr, len, plen); + __func__, (uint)paddr, len, plen); } map_len = len; return ptr; diff --git a/arch/sandbox/dts/Makefile b/arch/sandbox/dts/Makefile index 0197569262..861b4dc2b1 100644 --- a/arch/sandbox/dts/Makefile +++ b/arch/sandbox/dts/Makefile @@ -2,7 +2,11 @@ # SPDX-License-Identifier: GPL-2.0+ # +ifdef CONFIG_SANDBOX64 +dtb-$(CONFIG_SANDBOX) += sandbox64.dtb +else dtb-$(CONFIG_SANDBOX) += sandbox.dtb +endif dtb-$(CONFIG_UT_DM) += test.dtb targets += $(dtb-y) diff --git a/arch/sandbox/dts/sandbox64.dts b/arch/sandbox/dts/sandbox64.dts new file mode 100644 index 0000000000..18be889db6 --- /dev/null +++ b/arch/sandbox/dts/sandbox64.dts @@ -0,0 +1,317 @@ +/dts-v1/; + +#define USB_CLASS_HUB 9 + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "sandbox"; + + aliases { + eth5 = "/eth@90000000"; + i2c0 = &i2c_0; + pci0 = &pci; + rtc0 = &rtc_0; + }; + + chosen { + stdout-path = "/serial"; + }; + + cros_ec: cros-ec@0 { + reg = <0 0 0 0>; + compatible = "google,cros-ec-sandbox"; + + /* + * This describes the flash memory within the EC. Note + * that the STM32L flash erases to 0, not 0xff. + */ + #address-cells = <1>; + #size-cells = <1>; + flash@8000000 { + reg = <0x08000000 0x20000>; + erase-value = <0>; + #address-cells = <1>; + #size-cells = <1>; + + /* Information for sandbox */ + ro { + reg = <0 0xf000>; + }; + wp-ro { + reg = <0xf000 0x1000>; + }; + rw { + reg = <0x10000 0x10000>; + }; + }; + }; + + eth@10002000 { + compatible = "sandbox,eth"; + reg = <0x0 0x10002000 0x0 0x1000>; + fake-host-hwaddr = [00 00 66 44 22 00]; + }; + + eth@80000000 { + compatible = "sandbox,eth-raw"; + reg = <0x0 0x80000000 0x0 0x1000>; + host-raw-interface = "eth0"; + }; + + eth@90000000 { + compatible = "sandbox,eth-raw"; + reg = <0x0 0x90000000 0x0 0x1000>; + host-raw-interface = "lo"; + }; + + gpio_a: gpios@0 { + gpio-controller; + compatible = "sandbox,gpio"; + #gpio-cells = <1>; + gpio-bank-name = "a"; + num-gpios = <20>; + }; + + gpio_b: gpios@1 { + gpio-controller; + compatible = "sandbox,gpio"; + #gpio-cells = <2>; + gpio-bank-name = "b"; + num-gpios = <10>; + }; + + hexagon { + compatible = "demo-simple"; + colour = "white"; + sides = <6>; + }; + + i2c_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0 0 0>; + compatible = "sandbox,i2c"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + eeprom@2c { + reg = <0x2c>; + compatible = "i2c-eeprom"; + emul { + compatible = "sandbox,i2c-eeprom"; + sandbox,filename = "i2c.bin"; + sandbox,size = <128>; + }; + }; + + rtc_0: rtc@43 { + reg = <0x43>; + compatible = "sandbox-rtc"; + emul { + compatible = "sandbox,i2c-rtc"; + }; + }; + sandbox_pmic: sandbox_pmic { + reg = <0x40>; + }; + }; + + lcd { + u-boot,dm-pre-reloc; + compatible = "sandbox,lcd-sdl"; + xres = <1366>; + yres = <768>; + }; + + leds { + compatible = "gpio-leds"; + + iracibble { + gpios = <&gpio_a 1 0>; + label = "sandbox:red"; + }; + + martinet { + gpios = <&gpio_a 2 0>; + label = "sandbox:green"; + }; + }; + + pci: pci-controller { + compatible = "sandbox,pci"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x02000000 0 0x10000000 0 0x10000000 0 0x2000 + 0x01000000 0 0x20000000 0 0x20000000 0 0x2000>; + pci@1f,0 { + compatible = "pci-generic"; + reg = <0xf800 0 0 0 0>; + emul@1f,0 { + compatible = "sandbox,swap-case"; + }; + }; + }; + + pinctrl { + compatible = "sandbox,pinctrl"; + + pinctrl_i2c0: i2c0 { + groups = "i2c"; + function = "i2c"; + bias-pull-up; + }; + + pinctrl_serial0: uart0 { + groups = "serial_a"; + function = "serial"; + }; + }; + + reset@1 { + compatible = "sandbox,reset"; + }; + + spi@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0 0 0>; + compatible = "sandbox,spi"; + cs-gpios = <0>, <&gpio_a 0>; + firmware_storage_spi: flash@0 { + reg = <0>; + compatible = "spansion,m25p16", "sandbox,spi-flash"; + spi-max-frequency = <40000000>; + sandbox,filename = "spi.bin"; + }; + }; + + spl-test { + u-boot,dm-pre-reloc; + compatible = "sandbox,spl-test"; + boolval; + intval = <1>; + intarray = <2 3 4>; + byteval = [05]; + bytearray = [06]; + longbytearray = [09 0a 0b 0c 0d 0e 0f 10 11]; + stringval = "message"; + stringarray = "multi-word", "message"; + }; + + spl-test2 { + u-boot,dm-pre-reloc; + compatible = "sandbox,spl-test"; + intval = <3>; + intarray = <5>; + byteval = [08]; + bytearray = [01 23 34]; + longbytearray = [09 0a 0b 0c]; + stringval = "message2"; + stringarray = "another", "multi-word", "message"; + }; + + spl-test3 { + u-boot,dm-pre-reloc; + compatible = "sandbox,spl-test"; + stringarray = "one"; + }; + + spl-test4 { + u-boot,dm-pre-reloc; + compatible = "sandbox,spl-test.2"; + }; + + square { + compatible = "demo-shape"; + colour = "blue"; + sides = <4>; + }; + + timer { + compatible = "sandbox,timer"; + clock-frequency = <1000000>; + }; + + tpm { + compatible = "google,sandbox-tpm"; + }; + + triangle { + compatible = "demo-shape"; + colour = "cyan"; + sides = <3>; + character = <83>; + light-gpios = <&gpio_a 2>, <&gpio_b 6 0>; + }; + + /* Needs to be available prior to relocation */ + uart0: serial { + compatible = "sandbox,serial"; + sandbox,text-colour = "cyan"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_serial0>; + }; + + usb@0 { + compatible = "sandbox,usb"; + status = "disabled"; + hub { + compatible = "sandbox,usb-hub"; + #address-cells = <1>; + #size-cells = <0>; + flash-stick { + reg = <0>; + compatible = "sandbox,usb-flash"; + }; + }; + }; + + usb@1 { + compatible = "sandbox,usb"; + hub { + compatible = "usb-hub"; + usb,device-class = <USB_CLASS_HUB>; + hub-emul { + compatible = "sandbox,usb-hub"; + #address-cells = <1>; + #size-cells = <0>; + flash-stick { + reg = <0>; + compatible = "sandbox,usb-flash"; + sandbox,filepath = "flash.bin"; + }; + }; + }; + }; + + usb@2 { + compatible = "sandbox,usb"; + status = "disabled"; + }; + + spmi: spmi@0 { + compatible = "sandbox,spmi"; + #address-cells = <0x1>; + #size-cells = <0x1>; + pm8916@0 { + compatible = "qcom,spmi-pmic"; + reg = <0x0 0x1>; + #address-cells = <0x1>; + #size-cells = <0x1>; + + spmi_gpios: gpios@c000 { + compatible = "qcom,pm8916-gpio"; + reg = <0xc000 0x400>; + gpio-controller; + gpio-count = <4>; + #gpio-cells = <2>; + gpio-bank-name="spmi"; + }; + }; + }; +}; + +#include "cros-ec-keyboard.dtsi" +#include "sandbox_pmic.dtsi" diff --git a/arch/sandbox/include/asm/io.h b/arch/sandbox/include/asm/io.h index 59729f5635..8aacbaa817 100644 --- a/arch/sandbox/include/asm/io.h +++ b/arch/sandbox/include/asm/io.h @@ -43,9 +43,15 @@ phys_addr_t map_to_sysmem(const void *ptr); #define readb(addr) ((void)addr, 0) #define readw(addr) ((void)addr, 0) #define readl(addr) ((void)addr, 0) +#ifdef CONFIG_SANDBOX64 +#define readq(addr) ((void)addr, 0) +#endif #define writeb(v, addr) ((void)addr) #define writew(v, addr) ((void)addr) #define writel(v, addr) ((void)addr) +#ifdef CONFIG_SANDBOX64 +#define writeq(v, addr) ((void)addr) +#endif /* * Clear and set bits in one shot. These macros can be used to clear and diff --git a/arch/sandbox/include/asm/types.h b/arch/sandbox/include/asm/types.h index 623cdafefa..31a043e249 100644 --- a/arch/sandbox/include/asm/types.h +++ b/arch/sandbox/include/asm/types.h @@ -54,11 +54,21 @@ typedef __UINT64_TYPE__ u64; * Number of bits in a C 'long' on this architecture. Set this to 32 when * building on a 32-bit machine. */ -#define BITS_PER_LONG 32 - +#ifdef CONFIG_SANDBOX64 +#define BITS_PER_LONG 64 +#else /* CONFIG_ARM64 */ +#define BITS_PER_LONG 32 +#endif /* CONFIG_ARM64 */ + +#ifdef CONFIG_SANDBOX64 +typedef unsigned long long dma_addr_t; +typedef u64 phys_addr_t; +typedef u64 phys_size_t; +#else /* CONFIG_ARM64 */ typedef unsigned long dma_addr_t; typedef u32 phys_addr_t; typedef u32 phys_size_t; +#endif /* CONFIG_ARM64 */ #endif /* __KERNEL__ */ diff --git a/cmd/demo.c b/cmd/demo.c index 209dc4a57c..bf14f7b1c5 100644 --- a/cmd/demo.c +++ b/cmd/demo.c @@ -71,9 +71,9 @@ int do_demo_list(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) dev; ret = uclass_next_device(&dev)) { printf("entry %d - instance %08x, ops %08x, platdata %08x\n", - i++, map_to_sysmem(dev), - map_to_sysmem(dev->driver->ops), - map_to_sysmem(dev_get_platdata(dev))); + i++, (uint)map_to_sysmem(dev), + (uint)map_to_sysmem(dev->driver->ops), + (uint)map_to_sysmem(dev_get_platdata(dev))); } return cmd_process_error(cmdtp, ret); diff --git a/configs/sandbox64_defconfig b/configs/sandbox64_defconfig new file mode 100644 index 0000000000..85b339936f --- /dev/null +++ b/configs/sandbox64_defconfig @@ -0,0 +1,200 @@ +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SANDBOX64=y +CONFIG_DEFAULT_DEVICE_TREE="sandbox64" +CONFIG_DISTRO_DEFAULTS=y +CONFIG_ANDROID_BOOT_IMAGE=y +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_FIT_VERBOSE=y +CONFIG_BOOTSTAGE=y +CONFIG_BOOTSTAGE_REPORT=y +CONFIG_BOOTSTAGE_FDT=y +CONFIG_BOOTSTAGE_STASH=y +CONFIG_BOOTSTAGE_STASH_ADDR=0x0 +CONFIG_BOOTSTAGE_STASH_SIZE=0x4096 +CONFIG_CONSOLE_RECORD=y +CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000 +CONFIG_SILENT_CONSOLE=y +CONFIG_PRE_CONSOLE_BUFFER=y +CONFIG_PRE_CON_BUF_ADDR=0x100000 +CONFIG_LOG=y +CONFIG_LOG_MAX_LEVEL=6 +CONFIG_CMD_CPU=y +CONFIG_CMD_LICENSE=y +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_ELF is not set +CONFIG_CMD_ASKENV=y +CONFIG_CMD_GREPENV=y +CONFIG_CMD_ENV_CALLBACK=y +CONFIG_CMD_ENV_FLAGS=y +CONFIG_LOOPW=y +CONFIG_CMD_MD5SUM=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_MX_CYCLIC=y +CONFIG_CMD_DEMO=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_GPT_RENAME=y +CONFIG_CMD_IDE=y +CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y +CONFIG_CMD_READ=y +CONFIG_CMD_REMOTEPROC=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_TFTPSRV=y +CONFIG_CMD_RARP=y +CONFIG_CMD_CDP=y +CONFIG_CMD_SNTP=y +CONFIG_CMD_DNS=y +CONFIG_CMD_LINK_LOCAL=y +CONFIG_CMD_ETHSW=y +CONFIG_CMD_BMP=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_SOUND=y +CONFIG_CMD_QFW=y +CONFIG_CMD_BOOTSTAGE=y +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_TPM=y +CONFIG_CMD_TPM_TEST=y +CONFIG_CMD_BTRFS=y +CONFIG_CMD_CBFS=y +CONFIG_CMD_CRAMFS=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_LOG=y +CONFIG_MAC_PARTITION=y +CONFIG_AMIGA_PARTITION=y +CONFIG_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_OF_HOSTFILE=y +CONFIG_NETCONSOLE=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_DEVRES=y +CONFIG_DEBUG_DEVRES=y +CONFIG_ADC=y +CONFIG_ADC_SANDBOX=y +CONFIG_CLK=y +CONFIG_CPU=y +CONFIG_DM_DEMO=y +CONFIG_DM_DEMO_SIMPLE=y +CONFIG_DM_DEMO_SHAPE=y +CONFIG_PM8916_GPIO=y +CONFIG_SANDBOX_GPIO=y +CONFIG_DM_I2C_COMPAT=y +CONFIG_I2C_CROS_EC_TUNNEL=y +CONFIG_I2C_CROS_EC_LDO=y +CONFIG_DM_I2C_GPIO=y +CONFIG_SYS_I2C_SANDBOX=y +CONFIG_I2C_MUX=y +CONFIG_SPL_I2C_MUX=y +CONFIG_I2C_ARB_GPIO_CHALLENGE=y +CONFIG_CROS_EC_KEYB=y +CONFIG_I8042_KEYB=y +CONFIG_LED=y +CONFIG_LED_BLINK=y +CONFIG_LED_GPIO=y +CONFIG_DM_MAILBOX=y +CONFIG_SANDBOX_MBOX=y +CONFIG_MISC=y +CONFIG_CROS_EC=y +CONFIG_CROS_EC_I2C=y +CONFIG_CROS_EC_LPC=y +CONFIG_CROS_EC_SANDBOX=y +CONFIG_CROS_EC_SPI=y +CONFIG_PWRSEQ=y +CONFIG_SPL_PWRSEQ=y +CONFIG_I2C_EEPROM=y +CONFIG_MMC_SANDBOX=y +CONFIG_SPI_FLASH_SANDBOX=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_ATMEL=y +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_DM_ETH=y +CONFIG_NVME=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCI_SANDBOX=y +CONFIG_PHY=y +CONFIG_PHY_SANDBOX=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_ROCKCHIP_RK3036=y +CONFIG_PINCTRL_ROCKCHIP_RK3288=y +CONFIG_PINCTRL_SANDBOX=y +CONFIG_POWER_DOMAIN=y +CONFIG_SANDBOX_POWER_DOMAIN=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_ACT8846=y +CONFIG_DM_PMIC_PFUZE100=y +CONFIG_DM_PMIC_MAX77686=y +CONFIG_PMIC_PM8916=y +CONFIG_PMIC_RK8XX=y +CONFIG_PMIC_S2MPS11=y +CONFIG_DM_PMIC_SANDBOX=y +CONFIG_PMIC_S5M8767=y +CONFIG_PMIC_TPS65090=y +CONFIG_DM_REGULATOR=y +CONFIG_REGULATOR_ACT8846=y +CONFIG_DM_REGULATOR_PFUZE100=y +CONFIG_DM_REGULATOR_MAX77686=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_REGULATOR_S5M8767=y +CONFIG_DM_REGULATOR_SANDBOX=y +CONFIG_REGULATOR_TPS65090=y +CONFIG_DM_PWM=y +CONFIG_PWM_SANDBOX=y +CONFIG_RAM=y +CONFIG_REMOTEPROC_SANDBOX=y +CONFIG_DM_RESET=y +CONFIG_SANDBOX_RESET=y +CONFIG_DM_RTC=y +CONFIG_SANDBOX_SERIAL=y +CONFIG_SOUND=y +CONFIG_SOUND_SANDBOX=y +CONFIG_SANDBOX_SPI=y +CONFIG_SPMI=y +CONFIG_SPMI_SANDBOX=y +CONFIG_SYSRESET=y +CONFIG_TIMER=y +CONFIG_TIMER_EARLY=y +CONFIG_SANDBOX_TIMER=y +CONFIG_TPM_TIS_SANDBOX=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EMUL=y +CONFIG_USB_STORAGE=y +CONFIG_USB_KEYBOARD=y +CONFIG_DM_VIDEO=y +CONFIG_CONSOLE_ROTATION=y +CONFIG_CONSOLE_TRUETYPE=y +CONFIG_CONSOLE_TRUETYPE_CANTORAONE=y +CONFIG_VIDEO_SANDBOX_SDL=y +CONFIG_WDT=y +CONFIG_WDT_SANDBOX=y +CONFIG_FS_CBFS=y +CONFIG_FS_CRAMFS=y +CONFIG_CMD_DHRYSTONE=y +CONFIG_TPM=y +CONFIG_LZ4=y +CONFIG_ERRNO_STR=y +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_UNIT_TEST=y +CONFIG_UT_TIME=y +CONFIG_UT_DM=y +CONFIG_UT_ENV=y +CONFIG_UT_OVERLAY=y diff --git a/drivers/demo/demo-simple.c b/drivers/demo/demo-simple.c index f069748e05..d05b1dfd87 100644 --- a/drivers/demo/demo-simple.c +++ b/drivers/demo/demo-simple.c @@ -17,7 +17,7 @@ static int simple_hello(struct udevice *dev, int ch) { const struct dm_demo_pdata *pdata = dev_get_platdata(dev); - printf("Hello from %08x: %s %d\n", map_to_sysmem(dev), pdata->colour, + printf("Hello from %08x: %s %d\n", (uint)map_to_sysmem(dev), pdata->colour, pdata->sides); return 0; -- 2.13.6

2 5

[U-Boot] [PATCH 00/23] mmc: omap5: Add support for UHS and HS200 modes
by Jean-Jacques Hiblot 19 Jan '18

19 Jan '18

This series adds the missing bit to enable the UHS, HS200 and DDR52 modes on the omap5 platforms (DRA7 and AM57). It relies on the following series: * [PATCH v2 00/26] mmc: Add support for HS200 and UHS modes * [PATCH v2 0/5] mmc: omap_hsmmc: Add support for ADMA * [PATCH v3 0/2] power: Add a driver to handle the PBIAS cell of the TI SOCs Enabling support for high speed modes on omap5 requires implementing: * io signal voltage selection * tuning support * pin configuration (IO delays) The few last patches enable the high mode for all omap5 platforms except some for which we need to disable either the UHS or the HS200 because the volatge regulators on board would not allow using those modes. This is not a SOC limitation. With this in place we observe significant improvements in the performances: on a DRA72 evm: eMMC HS200: 124 MB/s eMMC DDR52: 78 MB/s sd SDR104: 71 MB/s sd SDR50: 44 MB/s For the record, the original performances were: SD High speed: 18 MB/s MMC High speed: 18 MB/s This series has been tested on: * DRA71-evm * DRA72-evm * DRA7x-evm * DRA76-evm * AM57x-evm * Beaglebone Black * AM335x evm * AM437x SK Jean-Jacques Jean-Jacques Hiblot (8): mmc: omap_hsmmc: Reduce the max timeout for reset controller fsm mmc: omap_hsmmc: allow the simple HS modes to use the default pinctrl mmc: omap_hsmmc: update mmc->clock with the actual bus speed mmc: omap_hsmmc: implement send_init_stream callback mmc: omap_hsmmc: add signal voltage selection support ARM: dts: dra7: Add supported MMC/SD modes in MMC dt nodes dts: am57xx-beagle-x15: disable UHS and HS200 support dts: am57xx-idk: disable HS200 support Kishon Vijay Abraham I (15): mmc: omap_hsmmc: cleanup clock configuration mmc: omap_hsmmc: cleanup omap_hsmmc_set_ios mmc: omap_hsmmc: add support to set default io voltage mmc: omap_hsmmc: set MMC mode in the UHSMS bit field mmc: omap_hsmmc: Enable DDR mode support mmc: omap_hsmmc: Add tuning support mmc: omap_hsmmc: Workaround for errata id i802 mmc: omap_hsmmc: use mmc_of_parse to populate mmc_config ARM: OMAP5/DRA7: Enable iodelay recalibration to be done from uboot mmc: omap_hsmmc: Add support to set IODELAY values mmc: omap_hsmmc: Add support to get pinctrl values and max frequency for different hw revisions mmc: omap_hsmmc: allow mmc clock to be gated ARM: OMAP5: set mmc clock frequency to 192MHz ARM: dts: DRA7: use new dra7-specific compatible string ARM: DRA7x/AM57x: Add MMC/SD fixups for rev1.0 and rev 1.1 arch/arm/dts/am57xx-beagle-x15.dts | 6 + arch/arm/dts/am57xx-idk-common.dtsi | 2 + arch/arm/dts/dra7.dtsi | 22 +- arch/arm/include/asm/arch-omap5/clock.h | 2 +- arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h | 3 + arch/arm/include/asm/arch-omap5/sys_proto.h | 7 + arch/arm/include/asm/omap_mmc.h | 59 +- arch/arm/mach-omap2/omap5/dra7xx_iodelay.c | 30 + arch/arm/mach-omap2/omap5/hw_data.c | 10 +- board/ti/am57xx/board.c | 30 + board/ti/dra7xx/evm.c | 29 + drivers/mmc/omap_hsmmc.c | 940 +++++++++++++++++++++-- include/configs/am57xx_evm.h | 2 - include/configs/dra7xx_evm.h | 2 - 14 files changed, 1071 insertions(+), 73 deletions(-) -- 1.9.1

2 24

[U-Boot] [PATCH v2 1/2] env: sf: Add support for env init for QSPI-NOR
by Ashish Kumar 19 Jan '18

19 Jan '18

ENV variables can now be used before relocation. Signed-off-by: Ashish Kumar <Ashish.Kumar(a)nxp.com> --- v2: replace & with && in #if Tested on ls1088ardb. Tested on ls1012hexa after defining CONFIG_ENV_ADDR env/sf.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/env/sf.c b/env/sf.c index e51b1ae..a2e4c93 100644 --- a/env/sf.c +++ b/env/sf.c @@ -34,6 +34,7 @@ #ifndef CONFIG_SPL_BUILD #define CMD_SAVEENV +#define INITENV #endif #ifdef CONFIG_ENV_OFFSET_REDUND @@ -348,6 +349,23 @@ out: } #endif +#if defined(INITENV) && defined(CONFIG_ENV_ADDR) +static int env_sf_init(void) +{ + env_t *env_ptr = (env_t *)(CONFIG_ENV_ADDR); + + if (crc32(0, env_ptr->data, ENV_SIZE) == env_ptr->crc) { + gd->env_addr = (ulong)&(env_ptr->data); + gd->env_valid = 1; + } else { + gd->env_addr = (ulong)&default_environment[0]; + gd->env_valid = 1; + } + + return 0; +} +#endif + U_BOOT_ENV_LOCATION(sf) = { .location = ENVL_SPI_FLASH, ENV_NAME("SPI Flash") @@ -355,4 +373,7 @@ U_BOOT_ENV_LOCATION(sf) = { #ifdef CMD_SAVEENV .save = env_save_ptr(env_sf_save), #endif +#if defined(INITENV) && defined(CONFIG_ENV_ADDR) + .init = env_sf_init, +#endif }; -- 2.7.4

3 7

[U-Boot] [PATCH 1/2] arm64: ls1046a: Add sata distro boot support
by Yuantian Tang 19 Jan '18

19 Jan '18

Sata is equipped on ls1046a and can be a boot source. Add sata boot support as a option if available. Signed-off-by: Tang Yuantian <andy.tang(a)nxp.com> --- include/configs/ls1046a_common.h | 13 +++++++++++++ include/configs/ls1046aqds.h | 10 ---------- include/configs/ls1046ardb.h | 12 ------------ 3 files changed, 13 insertions(+), 22 deletions(-) diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index e208f7d..309bfd8 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -145,6 +145,18 @@ #define CONFIG_PCI_SCAN_SHOW #endif +/* SATA */ +#ifndef SPL_NO_SATA +#define CONFIG_SCSI_AHCI_PLAT + +#define CONFIG_SYS_SATA AHCI_BASE_ADDR + +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) +#endif + /* Command line configuration */ /* MMC */ @@ -201,6 +213,7 @@ #include <config_distro_defaults.h> #ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES(func) \ + func(SCSI, scsi, 0) \ func(MMC, mmc, 0) \ func(USB, usb, 0) #include <config_distro_bootcmd.h> diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index c3b0f4d..456f61a 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -136,9 +136,6 @@ unsigned long get_board_ddr_clk(void); #define CFG_LPUART_EN 0x2 #endif -/* SATA */ -#define CONFIG_SCSI_AHCI_PLAT - /* EEPROM */ #define CONFIG_ID_EEPROM #define CONFIG_SYS_I2C_EEPROM_NXID @@ -148,13 +145,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -#define CONFIG_SYS_SATA AHCI_BASE_ADDR - -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) - /* * IFC Definitions */ diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index 784894f..f4f4fd7 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -209,18 +209,6 @@ #endif #endif -/* SATA */ -#ifndef SPL_NO_SATA -#define CONFIG_SCSI_AHCI_PLAT - -#define CONFIG_SYS_SATA AHCI_BASE_ADDR - -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) -#endif - #ifndef SPL_NO_MISC #undef CONFIG_BOOTCOMMAND #if defined(CONFIG_QSPI_BOOT) -- 1.7.1

2 3