March 2017 - U-Boot

[U-Boot] [U-Boot 0/3] introduce Rockchip rockusb
by Eddie Cai 14 May '17

14 May '17

rockusb is a protocol run between host pc and device. it help people get device info, flash image to device. this patch implement rockusb on device side. Eddie Cai (3): drivers: usb: gadget: add the rockusb gadget cmd: add rockusb command rockchip: rk3288: enable rockusb support on rk3288 based device cmd/Kconfig | 12 + cmd/Makefile | 1 + cmd/rockusb.c | 79 ++++ drivers/usb/gadget/Makefile | 1 + drivers/usb/gadget/f_rockusb.c | 801 ++++++++++++++++++++++++++++++++++++++++ include/configs/rk3288_common.h | 4 + include/rockusb.h | 13 + 7 files changed, 911 insertions(+) create mode 100644 cmd/rockusb.c create mode 100644 drivers/usb/gadget/f_rockusb.c create mode 100644 include/rockusb.h -- 2.7.4

6 35

[U-Boot] [PATCH] [V2] bcm2835: wdt: support for the bcm2835/2836 wdt
by Paolo Pisati 10 May '17

10 May '17

The following patch add support for the watchdog built into the bcm2835/2836 chips, using the max timeout (~15s). Tested on my RaspberryPi2. Changelog: v2: fixed __eufi_runtime usage and moved to Kconfig Paolo Pisati (1): bcm2835_wdt: support for the BCM2835/2836 watchdog arch/arm/mach-bcm283x/reset.c | 21 ++++++++++++++++++--- board/raspberrypi/rpi/rpi.c | 4 ++++ drivers/watchdog/Kconfig | 15 +++++++++++++++ drivers/watchdog/Makefile | 1 + drivers/watchdog/bcm2835_wdt.c | 35 +++++++++++++++++++++++++++++++++++ 5 files changed, 73 insertions(+), 3 deletions(-) create mode 100644 drivers/watchdog/bcm2835_wdt.c -- 2.7.4

2 2

[U-Boot] [PATCH 0/3] Marvell A7K/A8K PCIe fixes and extensions
by kostap＠marvell.com 09 May '17

09 May '17

From: Konstantin Porotchkin <kostap(a)marvell.com> This patch series includes fix for the mvebu DW PCIe driver that allows scanning of empty (unlinked) PCIe slots. The default DTS file for Armada-8040-DB is re-arranged and aligned with Marvell default configuration "A" for this board. PCIe devices scan is added to the early init stage for eliminating need for usage of "pci enum" command on every reboot. Konstantin Porotchkin (3): arm64: mvebu: Trigger PCI devices scan at early init stage fix: mvebu: pcie_dw: Allow probing empty PCIe slots mvebu: dts: a80x0: Sync the DB DTS with standard config A arch/arm/dts/armada-8040-db.dts | 222 +++++++++++++++++++------------------ arch/arm/mach-mvebu/arm64-common.c | 13 ++- drivers/pci/pcie_dw_mvebu.c | 10 +- 3 files changed, 131 insertions(+), 114 deletions(-) -- 2.7.4

4 11

[U-Boot] [PATCH 0/5] Add support for NAND flash to A7K/A8K SoC family
by kostap＠marvell.com 09 May '17

09 May '17

From: Konstantin Porotchkin <kostap(a)marvell.com> This patch series adds NAND flash support to Marvell A7K/A8K SoC families. Additionally it fixes the pxa3xx driver by enforcing usage of DTS-supplied NAND parameters instead of using the hardcoded ones. The Marvell "bubt" command code related to NAND flash is updated according to new DM driver APIs. Added a default configuration file for Armada-7040 DB with NAND flash selected as a boot device instead of default SPI flash. Added a DTS file for this setup that includes proper MPPs configuration. These patches should be applied on top of the following patch that was sent to the u-boot list earlier: "fix: nand: Fix nand RW access wrappers" Konstantin Porotchkin (5): fix: nand: pxa3xx: Remove hardcode values from the driver arm64: mvebu: a8k: Add support for NAND clock get arm64: mvebu: Fix the bubt comamnd NAND device support arm64: a8k: dts: Add support for NAND devices on A8K platform arm64: mvebu: a8k: Add NAND configuration parameters arch/arm/dts/Makefile | 1 + arch/arm/dts/armada-7040-db-nand.dts | 222 ++++++++++++++++++++++++++++++++ arch/arm/dts/armada-7040-db.dts | 1 + arch/arm/dts/armada-cp110-master.dtsi | 13 ++ arch/arm/mach-mvebu/armada8k/cpu.c | 16 +++ cmd/mvebu/bubt.c | 13 +- configs/mvebu_db-88f7040-nand_defconfig | 72 +++++++++++ drivers/mtd/nand/pxa3xx_nand.c | 62 +++++++-- include/configs/mvebu_armada-8k.h | 11 ++ 9 files changed, 397 insertions(+), 14 deletions(-) create mode 100644 arch/arm/dts/armada-7040-db-nand.dts create mode 100644 configs/mvebu_db-88f7040-nand_defconfig -- 2.7.4

4 16

[U-Boot] [PATCH v3 00/13] STiH410-B2260: add reset, usb and fastboot support
by patrice.chotard＠st.com 09 May '17

09 May '17

From: Patrice Chotard <patrice.chotard(a)st.com> This series adds : _ update existing sdhci driver to use reset framework _ add usb phy driver _ add ehci support _ add ohci support _ add xhci support _ add fastboot support With all this feature enable, it's now possible to _ boot on usb mass storage device _ boot from kernel image and dtb previously loaded using tftp _ update mmc partiton using fastboot v3: _ remove reset driver (already applied on u-boot-dm tree by Simon Glass) _ patch 4: add new USB PHY uclass requested by Simon Glass _ patch 5: convert STi usb phy driver to new USB PHY uclass _ patch 6/7: update echi/ohci drivers to use USB PHY uclass _ patch 8/9: rework xhci-sti.c and dwc3-sti.c. Previously, xhci-sti driver binded dwc3-sti (STi glue driver) which was not correct. Now we respect the device tree hierarchy, ie the STi dwc3 glue driver is first probed, then bind the xhci-sti driver. v2: _ add Reviewed-by: Jaehoon Chung <jh80.chung(a)samsung.com> in patches 2,3 and 4 _ fix remarks done by Marek Vasut : _ patch 5 : replace bitfield_replace() by clrsetbits_le32() _ patch 6 : update error messages and add remove callback _ patch 8 : put board specific defines in a separate patch _ patch 7: use setbits_le32() instead of read, modify, write sequence and add missing parenthesis _ squash previous patches 7,9,11,12,14,16,17,18,19,20 and 21 in patch 14 Patrice Chotard (13): mmc: sti_sdhci: Rework sti_mmc_core_config() ARM: dts: stih410-family: Add missing reset_names for mmc1 node mmc: sti_sdhci: Use reset framework dm: usb: Add a uclass for USB PHY usb: phy: Add STi USB2 PHY usb: ehci: Add STi ehci support usb: ohci: Add STi ohci support usb: xhci: Add STi xhci support usb: dwc3: Add dwc3 glue driver support for STi board: STiH410-B2260: add OHCI and XHCI related defines board: STiH410-B2260: add fastboot support STiH410-B2260: enable USB Host Networking STiH410-B2260: enable USB, fastboot, reset related flags arch/arm/dts/stih407-family.dtsi | 1 + arch/arm/include/asm/arch-stih410/sys_proto.h | 11 + board/st/stih410-b2260/board.c | 44 ++++ configs/stih410-b2260_defconfig | 36 ++- doc/device-tree-bindings/phy/phy-stih407-usb.txt | 24 ++ doc/device-tree-bindings/usb/dwc3-st.txt | 60 +++++ drivers/mmc/sti_sdhci.c | 60 +++-- drivers/usb/Kconfig | 4 + drivers/usb/host/Kconfig | 26 +++ drivers/usb/host/Makefile | 3 + drivers/usb/host/dwc3-sti-glue.c | 278 +++++++++++++++++++++++ drivers/usb/host/ehci-sti.c | 116 ++++++++++ drivers/usb/host/ohci-sti.c | 93 ++++++++ drivers/usb/host/xhci-sti.c | 114 ++++++++++ drivers/usb/phy/Kconfig | 19 ++ drivers/usb/phy/Makefile | 2 + drivers/usb/phy/sti_usb_phy.c | 181 +++++++++++++++ drivers/usb/phy/usb_phy_uclass.c | 90 ++++++++ include/configs/stih410-b2260.h | 16 ++ include/dm/uclass-id.h | 1 + include/dwc3-sti-glue.h | 43 ++++ include/usb_phy-uclass.h | 42 ++++ include/usb_phy.h | 112 +++++++++ 23 files changed, 1350 insertions(+), 26 deletions(-) create mode 100644 arch/arm/include/asm/arch-stih410/sys_proto.h create mode 100644 doc/device-tree-bindings/phy/phy-stih407-usb.txt create mode 100644 doc/device-tree-bindings/usb/dwc3-st.txt create mode 100644 drivers/usb/host/dwc3-sti-glue.c create mode 100644 drivers/usb/host/ehci-sti.c create mode 100644 drivers/usb/host/ohci-sti.c create mode 100644 drivers/usb/host/xhci-sti.c create mode 100644 drivers/usb/phy/Kconfig create mode 100644 drivers/usb/phy/sti_usb_phy.c create mode 100644 drivers/usb/phy/usb_phy_uclass.c create mode 100644 include/dwc3-sti-glue.h create mode 100644 include/usb_phy-uclass.h create mode 100644 include/usb_phy.h -- 1.9.1

5 23

[U-Boot] [PATCH v4 0/7] am57xx: cl-som-am57x: fix usb
by Uri Mashiach 08 May '17

08 May '17

Various USB related comits for the CL-SOM-AM57x module. --- V1 -> V2: Replace commit "fix XHCI registers base address" with "reintroduce the CONFIG_AM57XX symbol". V2 -> V3: * New commit "move CONFIG_DRA7XX to Kconfig" * Replace commit "reintroduce the CONFIG_AM57XX symbol" with "xHCI registers based on USB port index" V3 -> V4: Update commit "move CONFIG_DRA7XX to Kconfig" Update commit "xHCI registers based on USB port index" Uri Mashiach (7): arm: dra7xx: move CONFIG_DRA7XX to Kconfig arm: usb: dra7xx: xHCI registers based on USB port index usb: host: xhci-omap: fix double weak board_usb_init functions arm: am57xx: cl-som-am57x: invoke clock API to enable/disable clocks arm: am57xx: cl-som-am57x: fix USB scan arm: am57xx: cl-som-am57x: enable USB storage arm: am57xx: cl-som-am57x: enable USB commands arch/arm/mach-omap2/omap5/Kconfig | 8 ++++++++ board/compulab/cl-som-am57x/cl-som-am57x.c | 10 ---------- board/ti/am43xx/board.c | 4 ++-- board/ti/am57xx/board.c | 4 ++-- board/ti/dra7xx/evm.c | 4 ++-- configs/cl-som-am57x_defconfig | 2 ++ configs/dra7xx_evm_defconfig | 1 + configs/dra7xx_hs_evm_defconfig | 1 + drivers/usb/host/Kconfig | 9 +++++++++ drivers/usb/host/xhci-omap.c | 19 +++++++++++++++++-- include/configs/am57xx_evm.h | 2 -- include/configs/cl-som-am57x.h | 6 ++---- include/configs/dra7xx_evm.h | 2 -- include/linux/usb/xhci-omap.h | 6 ++++-- scripts/config_whitelist.txt | 1 - 15 files changed, 50 insertions(+), 29 deletions(-) -- 2.7.4

5 38

[U-Boot] [PATCH 1/3] drivers/net/Kconfig: Correct use of apostrophe
by Tom Rini 02 May '17

02 May '17

Signed-off-by: Tom Rini <trini(a)konsulko.com> --- drivers/net/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 078d5a8..70e3661 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -168,7 +168,7 @@ config SUN8I_EMAC help This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC. It can be found in H3/A64/A83T based SoCs and compatible with both - External and Internal PHY's. + External and Internal PHYs. config XILINX_AXIEMAC depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) -- 2.1.4

2 6

[U-Boot] [PATCH 00/10] sunxi: Remove SYS_EXTRA_OPTIONS
by Mylène Josserand 02 May '17

02 May '17

Hello everyone, This patchset removes the SYS_EXTRA_OPTIONS from all sunxi defconfigs. The values in this variable are converted to Kconfig or simply removed. Based on u-boot sunxi repository: git://git.denx.de/u-boot-sunxi.git from last commit: 002d907da51fdf10a03d389852645675529c78e6 Patch 1: Convert SUNXI_GMAC config to Kconfig and remove it from all defconfig. Patch 2: Remove AXP209_POWER configuration as this config is already converted in Kconfig (drivers/power). It is automatically chosen when the SoC is sun4i, sun5i or sun7i. Patch 3 and 4: Remove CMD_BMP and CMD_ZIP configs from SYS_EXTRA_OPTIONS. Patch 5: Remove SYS_EXTRA_OPTIONS from mk802_defconfig as it contains only USB_EHCI which is already converted to Kconfig. Patch 6, 7: Convert SUNXI_EMAC and CONFIG_RGMII to Kconfig and remove it from all SYS_EXTRA_OPTIONS entries. Patch 8 and 9: Convert CONFIG_SATAPWR and CONFIG_MACPWR to Kconfig. It becomes a string instead of the gpio number so the function sunxi_name_to_gpio is used to do the conversion from string to int. Patch 10: Convert console index (CONS_INDEX) to Kconfig. The default value is 1 except for sun5i which is 2 and sun8i which is 5. Thank you in advance! Best regards, Mylène Josserand (10): sunxi: Convert SUNXI_GMAC to Kconfig sunxi: icnova-a20-swac_defconfig: Remove AXP209_POWER from SYS_EXTRA_OPTIONS sunxi: icnova-a20-swac_defconfig: Remove CMD_BMP from SYS_EXTRA_OPTIONS sunxi: icnova-a20-swac_defconfig: Remove CMD_UNZIP and SYS_EXTRA_OPTIONS sunxi: mk802_defconfig: Remove SYS_EXTRA_OPTIONS sunxi: Convert SUNXI_EMAC to Kconfig sunxi: Convert CONFIG_RGMII to Kconfig sunxi: Convert CONFIG_SATAPWR to Kconfig sunxi: Convert CONFIG_MACPWR to Kconfig sunxi: Convert CONS_INDEX to Kconfig board/sunxi/Kconfig | 36 ++++++++++++++++++++++++++++++ board/sunxi/board.c | 12 +++++----- configs/A10-OLinuXino-Lime_defconfig | 3 ++- configs/A10s-OLinuXino-M_defconfig | 2 +- configs/A13-OLinuXinoM_defconfig | 1 - configs/A13-OLinuXino_defconfig | 1 - configs/A20-OLinuXino-Lime2_defconfig | 4 +++- configs/A20-OLinuXino-Lime_defconfig | 3 ++- configs/A20-OLinuXino_MICRO_defconfig | 3 ++- configs/A20-Olimex-SOM-EVB_defconfig | 4 +++- configs/Ampe_A76_defconfig | 1 - configs/Bananapi_defconfig | 4 +++- configs/Bananapro_defconfig | 4 +++- configs/CHIP_defconfig | 1 - configs/CSQ_CS908_defconfig | 2 +- configs/Colombus_defconfig | 3 ++- configs/Cubieboard2_defconfig | 3 ++- configs/Cubieboard_defconfig | 3 ++- configs/Cubietruck_defconfig | 4 +++- configs/Empire_electronix_d709_defconfig | 1 - configs/Empire_electronix_m712_defconfig | 1 - configs/Hummingbird_A31_defconfig | 3 ++- configs/Itead_Ibox_A20_defconfig | 3 ++- configs/Lamobo_R1_defconfig | 5 ++++- configs/Linksprite_pcDuino3_Nano_defconfig | 4 +++- configs/Linksprite_pcDuino3_defconfig | 3 ++- configs/Linksprite_pcDuino_defconfig | 2 +- configs/Marsboard_A10_defconfig | 2 +- configs/Mele_A1000G_quad_defconfig | 2 +- configs/Mele_A1000_defconfig | 3 ++- configs/Mele_I7_defconfig | 2 +- configs/Mele_M3_defconfig | 2 +- configs/Mele_M5_defconfig | 2 +- configs/Mele_M9_defconfig | 2 +- configs/Orangepi_defconfig | 4 +++- configs/Orangepi_mini_defconfig | 4 +++- configs/Sinlinx_SinA31s_defconfig | 2 +- configs/Sinovoip_BPI_M2_defconfig | 3 ++- configs/Sinovoip_BPI_M3_defconfig | 2 +- configs/Wits_Pro_A20_DKT_defconfig | 3 ++- configs/ba10_tv_box_defconfig | 2 +- configs/difrnce_dit4350_defconfig | 1 - configs/ga10h_v1_1_defconfig | 1 - configs/gt90h_v4_defconfig | 1 - configs/i12-tvbox_defconfig | 3 ++- configs/iNet_D978_rev2_defconfig | 1 - configs/icnova-a20-swac_defconfig | 2 +- configs/inet86dz_defconfig | 1 - configs/inet98v_rev2_defconfig | 1 - configs/jesurun_q5_defconfig | 3 ++- configs/mixtile_loftq_defconfig | 4 +++- configs/mk802_defconfig | 1 - configs/orangepi_plus2e_defconfig | 2 +- configs/orangepi_plus_defconfig | 3 ++- configs/polaroid_mid2407pxe03_defconfig | 1 - configs/polaroid_mid2809pxe04_defconfig | 1 - configs/q8_a13_tablet_defconfig | 1 - configs/q8_a23_tablet_800x480_defconfig | 1 - configs/q8_a33_tablet_1024x600_defconfig | 1 - configs/q8_a33_tablet_800x480_defconfig | 1 - drivers/net/Kconfig | 6 +++++ 61 files changed, 124 insertions(+), 63 deletions(-) -- 2.11.0

4 23

[U-Boot] [PATCH 0/6] sunxi: update Pine64/A64 DTs
by Andre Przywara 02 May '17

02 May '17

Hi, in the wake of the sunxi DM enablement series it became apparent that the current device tree files for the A64 SoC and its board are outdated. Since Linux v4.10-rc1 there are now basic .dts files for the Allwinner A64 SoC and the Pine64 boards in the mainline kernel. Linux v4.11-rc1 added MMC and USB support. Because our preliminary device trees used in U-Boot differ significantly, let's update our copy with what's in the current Linus' master tree. Since in contrast to U-Boot the kernel still lacks support for Ethernet, we keep our preliminary nodes for that IP, but adjust it slightly to match the new clocks and reset bindings. As the sun8i-emac driver is actually using the DT for the pinmux setup, we teach it how to cope with the new pinctrl bindings in the first two patches. This is probably becoming somewhat obsolete very soon (with DM GPIO support on the list already), however I consider these two patches as merely fixes for the existing driver to maintain bisectability. It would make sense to merge the new DTs before the DM patches, so we need to have something in place which works meanwhile. Let me know what you think. Cheers, Andre. Andre Przywara (6): sunxi: GPIO: introduce sunxi_gpio_setup_dt_pins() net: sun8i-emac: use new, generic GPIO setup routine sunxi: dts: update sun50i-a64.dtsi from Linux sunxi: dts: update Pine64 .dts sunxi: dts: remove now obsolete pine64-common.dtsi sunxi: dts: add Bananapi M64 .dts arch/arm/dts/Makefile | 3 +- arch/arm/dts/sun50i-a64-bananapi-m64.dts | 135 +++++++ arch/arm/dts/sun50i-a64-pine64-common.dtsi | 93 ----- arch/arm/dts/sun50i-a64-pine64-plus.dts | 16 +- arch/arm/dts/sun50i-a64-pine64.dts | 72 +++- arch/arm/dts/sun50i-a64.dtsi | 615 +++++++++-------------------- arch/arm/include/asm/arch-sunxi/gpio.h | 4 + arch/arm/mach-sunxi/pinmux.c | 77 ++++ drivers/net/sun8i_emac.c | 38 +- include/dt-bindings/clock/sun50i-a64-ccu.h | 134 +++++++ include/dt-bindings/reset/sun50i-a64-ccu.h | 98 +++++ 11 files changed, 706 insertions(+), 579 deletions(-) create mode 100644 arch/arm/dts/sun50i-a64-bananapi-m64.dts delete mode 100644 arch/arm/dts/sun50i-a64-pine64-common.dtsi create mode 100644 include/dt-bindings/clock/sun50i-a64-ccu.h create mode 100644 include/dt-bindings/reset/sun50i-a64-ccu.h -- 2.8.2

4 13

[U-Boot] [PATCH] Remove extra fdt_fixup_ethernet() call
by Joakim Tjernlund 28 Apr '17

28 Apr '17

ft_cpu_setup() already calls fdt_fixup_ethernet(), calling it in image_setup_libfdt() is both redundant and breaks any modifications done by ft_board_setup(). Restore the old behavior by removing the call in image_setup_libfdt() Signed-off-by: Joakim Tjernlund <joakim.tjernlund(a)infinera.com> --- common/image-fdt.c | 1 - 1 file changed, 1 deletion(-) diff --git a/common/image-fdt.c b/common/image-fdt.c index 80e3e63..b8f5654 100644 --- a/common/image-fdt.c +++ b/common/image-fdt.c @@ -498,7 +498,6 @@ int image_setup_libfdt(bootm_headers_t *images, void *blob, goto err; } } - fdt_fixup_ethernet(blob); /* Delete the old LMB reservation */ lmb_free(lmb, (phys_addr_t)(u32)(uintptr_t)blob, -- 2.10.2

5 5