February 2017 - U-Boot

[U-Boot] Please pull u-boot-marvell/master
by Stefan Roese 01 Feb '17

01 Feb '17

Hi Tom, please pull the following patches from the Marvell U-Boot git repository. Mostly patches from GDSYS (Mario) for the MVEBU secure boot support which have been posted quite a while ago. Some patches of this patch series still have some open issues - thats why I've not included them. Thanks, Stefan The following changes since commit 794c6e2c96c20f8fc62890a5e13cc71ab99a2e57: Prepare v2017.03-rc1 (2017-01-30 19:05:43 -0500) are available in the git repository at: git://www.denx.de/git/u-boot-marvell.git for you to fetch changes up to a1b6b0a9c1f91756b93e6d804837dc178d79d39e: arm: mvebu: Implement secure boot (2017-02-01 09:04:18 +0100) ---------------------------------------------------------------- Dirk Eibach (2): pci: mvebu: Fix Armada 38x support net: phy: Support Marvell 88E1680 Mario Six (10): mvebu: Add board_pex_config() lib: tpm: Add command to flush resources tools: kwbimage: Fix dest addr tools: kwbimage: Fix style violations tools: kwbimage: Fix arithmetic with void pointers tools: kwbimage: Reduce scope of variables tools: kwbimage: Remove unused parameter tools: kwbimage: Factor out add_binary_header_v1 tools: kwbimage: Refactor line parsing and fix error arm: mvebu: Implement secure boot Reinhard Pfau (1): arm: mvebu: spl.c: Remove useless gd declaration Stefan Roese (1): phy: comphy_a3700: Change SD/MMC compatible DT node to match the updates Makefile | 3 +- arch/arm/mach-mvebu/Kconfig | 35 + arch/arm/mach-mvebu/Makefile | 1 + arch/arm/mach-mvebu/efuse.c | 264 +++++++ arch/arm/mach-mvebu/include/mach/cpu.h | 2 + arch/arm/mach-mvebu/include/mach/efuse.h | 69 ++ arch/arm/mach-mvebu/include/mach/soc.h | 1 + arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c | 8 + arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h | 2 + arch/arm/mach-mvebu/spl.c | 2 - board/gdsys/p1022/controlcenterd-id.c | 9 - cmd/tpm.c | 70 ++ doc/README.armada-secureboot | 373 ++++++++++ drivers/net/phy/marvell.c | 54 ++ drivers/pci/pci_mvebu.c | 25 +- drivers/phy/marvell/comphy_a3700.c | 7 +- drivers/tpm/Kconfig | 6 + include/tpm.h | 45 ++ lib/tpm.c | 29 + tools/Makefile | 6 +- tools/kwbimage.c | 1111 ++++++++++++++++++++++++---- tools/kwbimage.h | 37 + 22 files changed, 1970 insertions(+), 189 deletions(-) create mode 100644 arch/arm/mach-mvebu/efuse.c create mode 100644 arch/arm/mach-mvebu/include/mach/efuse.h create mode 100644 doc/README.armada-secureboot

2 1

[U-Boot] [GIT PULL] Please pull u-boot-mmc master
by Jaehoon Chung 01 Feb '17

01 Feb '17

2 1

[U-Boot] howto spi nand
by Dr. Matthias Schöpfer 01 Feb '17

01 Feb '17

Hi! I have a bsp with a patched u-boot Version 1.1.4. The board has nor and nand chip, both via spi. I have been able to access nor, but struggle with the spi nand. I have admittedly not much experience with nand device drivers and u-boot in that matter, but some understanding of linux kernel. I also have a functioning linux kernel driver for the spi nand. My question: Since the internal structure of u-boot has changed significantly from 1.1.4 to today, what would be the best way to approach this. I read some mails on the mailing list from 2015 where it was discussed to support spi nand like spi nor within sf functionality. Can someone point to a spi nand driver implementation or tell me, what the driver would have to look like?! Thanks and Regards, Matthias Dr.-Ing. Matthias Schöpfer | i-THINx GmbH | Software Engineer Phone: +49 (221) 99589-332 | Fax: +49 (221) 99589-199 Address: i-THINx GmbH | Butzweilerhof Allee 4 | 50829 Cologne | Germany E-Mail: Matthias.Schoepfer(a)i-thinx.com | Website: www.i-thinx.com Registered Office: Cologne | District court: Marburg | HRB 6749 Managing Director: Christian Faust This e-mail may contain confidential and/or privileged information. if you are not the intended recipient (or have received this e-mail in error) please notifiy the sender immediately and destroy this e-mail. Any unautohrized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. We like trees. Please consider the environment before printing this e-mail. Thank you.

1 0

[U-Boot] [PATCH] mpc5200: Correct return value of memcpy function
by thomas.graziadei＠omicronenergy.com 01 Feb '17

01 Feb '17

From: Mark Marshall <Mark.Marshall(a)omicron.at> The memcpy() function returns a pointer to trg. Signed-off-by: Mark Marshall <Mark.Marshall(a)omicron.at> Reviewed-by: Thomas Graziadei <thomas.graziadei(a)omicronenergy.com> --- arch/powerpc/lib/memcpy_mpc5200.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/lib/memcpy_mpc5200.c b/arch/powerpc/lib/memcpy_mpc5200.c index 75a3ef9..7e5a005 100644 --- a/arch/powerpc/lib/memcpy_mpc5200.c +++ b/arch/powerpc/lib/memcpy_mpc5200.c @@ -31,7 +31,7 @@ void *memcpy(void *trg, const void *src, size_t len) extern void* __memcpy(void *, const void *, size_t); char *s = (char *)src; char *t = (char *)trg; - void *dest = (void *)src; + void *dest = (void *)trg; /* * Check is source address is in flash: -- 2.7.4

3 2

[U-Boot] [PATCH] mpc85xx: Use symbolic names for cache control bits
by thomas.graziadei＠omicronenergy.com 01 Feb '17

01 Feb '17

From: Mark Marshall <Mark.Marshall(a)omicron.at> We should use the symbolic names for the cache control bits. Signed-off-by: Mark Marshall <Mark.Marshall(a)omicron.at> Reviewed-by: Thomas Graziadei <thomas.graziadei(a)omicronenergy.com> --- arch/powerpc/cpu/mpc85xx/start.S | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 932216c..eb817f1 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -1373,8 +1373,8 @@ icache_enable: mtlr r8 isync mfspr r4,L1CSR1 - ori r4,r4,0x0001 - oris r4,r4,0x0001 + ori r4,r4,(L1CSR1_CPE | L1CSR1_ICE)@l + oris r4,r4,(L1CSR1_CPE | L1CSR1_ICE)@h mtspr L1CSR1,r4 isync blr @@ -1402,8 +1402,8 @@ dcache_enable: mtlr r8 isync mfspr r0,L1CSR0 - ori r0,r0,0x0001 - oris r0,r0,0x0001 + ori r0,r0,(L1CSR0_CPE | L1CSR0_DCE)@l + oris r0,r0,(L1CSR0_CPE | L1CSR0_DCE)@h msync isync mtspr L1CSR0,r0 -- 2.7.4

2 1

[U-Boot] [PATCH v2 1/2] powerpc: mpc83xx: Minimize r1 modification
by Mario Six 01 Feb '17

01 Feb '17

The r1 register is modified several times during the cache-ram setup of the MPC83xx SoCs. Since this SP modification confuses debuggers, we use a general purpose register to compute the new stack pointer value, and only set the SP once after all computations are done. Signed-off-by: Mario Six <mario.six(a)gdsys.cc> --- Changes in v2: Patch added (following a suggestion by Joakim Tjernlund) --- arch/powerpc/cpu/mpc83xx/start.S | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S index 0001687703..c366f615e7 100644 --- a/arch/powerpc/cpu/mpc83xx/start.S +++ b/arch/powerpc/cpu/mpc83xx/start.S @@ -258,14 +258,17 @@ in_flash: #endif /* set up the stack pointer in our newly created - * cache-ram (r1) */ - lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h - ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l + * cache-ram; use r3 to keep the new SP for now to + * avoid overiding the SP it uselessly */ + lis r3, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h + ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l li r0, 0 /* Make room for stack frame header and */ - stwu r0, -4(r1) /* clear final stack frame so that */ - stwu r0, -4(r1) /* stack backtraces terminate cleanly */ + stwu r0, -4(r3) /* clear final stack frame so that */ + stwu r0, -4(r3) /* stack backtraces terminate cleanly */ + /* Finally, actually set SP */ + mr r1, r3 /* let the C-code set up the rest */ /* */ -- 2.11.0

3 4

[U-Boot] [u-boot PATCH v2 0/8] am57xx-idk LCD and am571x-idk 6 port ethernet pinmux
by Roger Quadros 01 Feb '17

01 Feb '17

Hi, This series contains - Support am571x-idk LCD vs 6 port ethernet pinmux configuration. - AM57xx-idk LCD detection support. - K2G: pick up PRUSS ethernet MAC addresses from board EEPROM. Changelog: v2: - avoid using __maybe_unused. - moved EEPROM address configuration to Kconfig. - LCD detection patch no longer update device tree. cheers, -roger Lokesh Vutla (1): ti: common: board_detect: Rename EEPROM scratch start macro Nishanth Menon (1): board: ti: am57xx-idk: Auto detect LCD Panel Roger Quadros (6): ARM: OMAP5+: GPIO: Add GPIO_TO_PIN() macro ti: common: board_detect: commodify ethaddr environment setting code board: ti: am571x-idk: Support 6 port Ethernet or 4 port Ethernet with LCD board: ti: am571x-idk: Update pinmux for ICSS2 Ethernet ARM: Use Kconfig for board EEPROM's I2C bus and chip address ARM: k2g: setup PRU ethernet MAC addresses arch/arm/Kconfig | 10 ++ arch/arm/include/asm/arch-omap5/gpio.h | 4 + arch/arm/include/asm/omap_common.h | 8 +- board/ti/am57xx/board.c | 102 ++++++++++++++++++++ board/ti/am57xx/mux_data.h | 166 ++++++++++++++++++++------------- board/ti/common/board_detect.c | 57 +++++++++++ board/ti/common/board_detect.h | 14 ++- board/ti/ks2_evm/board_k2g.c | 19 ++++ configs/am57xx_evm_defconfig | 2 + configs/am57xx_evm_nodt_defconfig | 2 + configs/am57xx_hs_evm_defconfig | 2 + configs/dra7xx_evm_defconfig | 2 + configs/dra7xx_hs_evm_defconfig | 2 + configs/k2g_evm_defconfig | 2 + include/configs/am57xx_evm.h | 4 - include/configs/dra7xx_evm.h | 4 - 16 files changed, 322 insertions(+), 78 deletions(-) -- 2.7.4

3 22

[U-Boot] [PATCH v2 00/18] arm: mvebu: Add gdsys ControlCenter-Compact board
by Mario Six 01 Feb '17

01 Feb '17

This patch series adds support for the Guntermann & Drunck ControlCenter-Compact board. To this extent, some bugs in the mvebu PCI driver are fixed, a GPIO driver is added, support for the Marvell 88E1680 is added, the TPM library is extended, the kwbimage generation is streamlined, a board function for manipulating the device tree is added, and secure boot for the mvebu architecture is implemented. Dirk Eibach (3): pci: mvebu: Fix Armada 38x support net: phy: Support Marvell 88E1680 arm: mvebu: Add gdsys ControlCenter-Compact board Mario Six (14): mvebu: Add board_pex_config() dm: Add callback to modify the device tree lib: tpm: Add command to flush resources core: device: Add dev_get_by_ofname function gpio: Add gpio_request_simple function tools: kwbimage: Fix dest addr tools: kwbimage: Fix style violations tools: kwbimage: Fix arithmetic with void pointers tools: kwbimage: Reduce scope of variables tools: kwbimage: Remove unused parameter tools: kwbimage: Factor out add_binary_header_v1 tools: kwbimage: Refactor line parsing and fix error arm: mvebu: Implement secure boot controlcenterdc: Make secure boot available Reinhard Pfau (1): arm: mvebu: spl.c: Remove useless gd declaration Makefile | 3 +- arch/arm/Kconfig | 1 + arch/arm/dts/Makefile | 3 +- arch/arm/dts/armada-38x-controlcenterdc.dts | 643 ++++++++++++++++ arch/arm/mach-mvebu/Kconfig | 39 + arch/arm/mach-mvebu/Makefile | 1 + arch/arm/mach-mvebu/efuse.c | 264 +++++++ arch/arm/mach-mvebu/include/mach/cpu.h | 2 + arch/arm/mach-mvebu/include/mach/efuse.h | 69 ++ arch/arm/mach-mvebu/include/mach/soc.h | 1 + arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c | 8 + arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h | 2 + arch/arm/mach-mvebu/spl.c | 2 - board/gdsys/a38x/.gitignore | 1 + board/gdsys/a38x/Kconfig | 36 + board/gdsys/a38x/MAINTAINERS | 7 + board/gdsys/a38x/Makefile | 44 ++ board/gdsys/a38x/controlcenterdc.c | 273 +++++++ board/gdsys/a38x/dt_helpers.c | 25 + board/gdsys/a38x/dt_helpers.h | 14 + board/gdsys/a38x/hre.c | 516 +++++++++++++ board/gdsys/a38x/hre.h | 38 + board/gdsys/a38x/hydra.c | 138 ++++ board/gdsys/a38x/hydra.h | 14 + board/gdsys/a38x/ihs_phys.c | 349 +++++++++ board/gdsys/a38x/ihs_phys.h | 2 + board/gdsys/a38x/keyprogram.c | 158 ++++ board/gdsys/a38x/keyprogram.h | 14 + board/gdsys/a38x/kwbimage.cfg.in | 40 + board/gdsys/a38x/spl.c | 21 + board/gdsys/p1022/controlcenterd-id.c | 9 - cmd/tpm.c | 70 ++ common/board_f.c | 10 + configs/controlcenterdc_defconfig | 57 ++ doc/README.armada-secureboot | 373 +++++++++ doc/driver-model/fdt-fixup.txt | 132 ++++ drivers/core/device.c | 7 + drivers/gpio/gpio-uclass.c | 17 + drivers/net/phy/marvell.c | 54 ++ drivers/pci/pci_mvebu.c | 25 +- drivers/tpm/Kconfig | 6 + dts/Kconfig | 10 + include/asm-generic/gpio.h | 22 + include/common.h | 1 + include/configs/controlcenterdc.h | 235 ++++++ include/dm/device.h | 8 + include/tpm.h | 45 ++ lib/tpm.c | 29 + tools/Makefile | 6 +- tools/kwbimage.c | 1111 +++++++++++++++++++++++---- tools/kwbimage.h | 37 + 51 files changed, 4806 insertions(+), 186 deletions(-) create mode 100644 arch/arm/dts/armada-38x-controlcenterdc.dts create mode 100644 arch/arm/mach-mvebu/efuse.c create mode 100644 arch/arm/mach-mvebu/include/mach/efuse.h create mode 100644 board/gdsys/a38x/.gitignore create mode 100644 board/gdsys/a38x/Kconfig create mode 100644 board/gdsys/a38x/MAINTAINERS create mode 100644 board/gdsys/a38x/Makefile create mode 100644 board/gdsys/a38x/controlcenterdc.c create mode 100644 board/gdsys/a38x/dt_helpers.c create mode 100644 board/gdsys/a38x/dt_helpers.h create mode 100644 board/gdsys/a38x/hre.c create mode 100644 board/gdsys/a38x/hre.h create mode 100644 board/gdsys/a38x/hydra.c create mode 100644 board/gdsys/a38x/hydra.h create mode 100644 board/gdsys/a38x/ihs_phys.c create mode 100644 board/gdsys/a38x/ihs_phys.h create mode 100644 board/gdsys/a38x/keyprogram.c create mode 100644 board/gdsys/a38x/keyprogram.h create mode 100644 board/gdsys/a38x/kwbimage.cfg.in create mode 100644 board/gdsys/a38x/spl.c create mode 100644 configs/controlcenterdc_defconfig create mode 100644 doc/README.armada-secureboot create mode 100644 doc/driver-model/fdt-fixup.txt create mode 100644 include/configs/controlcenterdc.h -- 2.9.0

4 54

[U-Boot] Build failure with u-boot master branch
by maitysanchayan＠gmail.com 01 Feb '17

01 Feb '17

Hello, I have been working on adding DCU support for Vybrid and during the process of rebasing to latest master for sending out patches, the build for u-boot master branch fails with the following error HOSTCC tools/gpimage-common.o HOSTCC tools/gpimage.o HOSTCC tools/dumpimage.o HOSTCC tools/mkimage.o LDFLAGS="" python ./lib/libfdt/setup.py \ "-Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -include ./include/libfdt_env.h -idirafterinclude -idirafter./arch/arm/include -I./lib/libfdt -I./tools -DCONFIG_SYS_TEXT_BASE=0x3f408000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -D_GNU_SOURCE " lib/libfdt/fdt.c lib/libfdt/fdt_ro.c lib/libfdt/fdt_rw.c lib/libfdt/fdt_strerror.c lib/libfdt/fdt_wip.c lib/libfdt/fdt_region.c lib/libfdt/fdt_sw.c tools/libfdt_wrap.c HOSTCC tools/proftool mv _libfdt.so tools/_libfdt.so mv: cannot stat '_libfdt.so': No such file or directory make[1]: *** [tools/Makefile:121: tools/_libfdt.so] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1217: tools] Error 2 config file is colibri_vf_defconfig. The earlier commit which worked for me was commit 035ebf85b09cf11c820ae9eec414097420741abd Merge: cc422dae21 68e7999ba9 Author: Tom Rini <trini(a)konsulko.com> Date: Sun Jan 15 13:33:30 2017 -0500 Merge branch 'master' of git://git.denx.de/u-boot-spi Is this is a known issue with a fix? Thanks & Regards, Sanchayan.

2 2