February 2017 - U-Boot

[U-Boot] [PATCH] drivers/video/cfb_console.c: Correct "COFNIG_NDS32" typo.
by Robert P. J. Day 03 Feb '17

03 Feb '17

Signed-off-by: Robert P. J. Day <rpjday(a)crashcourse.ca> --- diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index a4cbc44..3c0696e 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -1968,7 +1968,7 @@ static void *video_logo(void) static int cfb_fb_is_in_dram(void) { bd_t *bd = gd->bd; -#if defined(CONFIG_ARM) || defined(CONFIG_AVR32) || defined(COFNIG_NDS32) || \ +#if defined(CONFIG_ARM) || defined(CONFIG_AVR32) || defined(CONFIG_NDS32) || \ defined(CONFIG_SANDBOX) || defined(CONFIG_X86) ulong start, end; int i; -- ======================================================================== Robert P. J. Day Ottawa, Ontario, CANADA http://crashcourse.ca Twitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday ========================================================================

2 1

[U-Boot] [PATCH] regulator: palmas: Fix smps6 - smps9 indices
by Keerthy 03 Feb '17

03 Feb '17

Fix smps6 - smps9 indices Signed-off-by: Keerthy <j-keerthy(a)ti.com> --- drivers/power/regulator/palmas_regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/power/regulator/palmas_regulator.c b/drivers/power/regulator/palmas_regulator.c index cce7cd2..399f7a5 100644 --- a/drivers/power/regulator/palmas_regulator.c +++ b/drivers/power/regulator/palmas_regulator.c @@ -356,7 +356,7 @@ static int palmas_smps_probe(struct udevice *dev) case 8: case 9: case 10: - idx = dev->driver_data - 4; + idx = dev->driver_data - 3; uc_pdata->ctrl_reg = palmas_smps_ctrl[type][idx]; uc_pdata->volt_reg = palmas_smps_volt[type][idx]; break; -- 1.9.1

2 2

[U-Boot] [PATCH] microblaze: Rename local CONFIG_ symbol
by Phil Edworthy 03 Feb '17

03 Feb '17

CONFIG_SPL_STACK_SIZE is not a config option, so rename it. Signed-off-by: Phil Edworthy <phil.edworthy(a)renesas.com> --- include/configs/microblaze-generic.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 24de528..cff054a 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -305,13 +305,13 @@ CONFIG_SYS_MALLOC_F_LEN) /* Just for sure that there is a space for stack */ -#define CONFIG_SPL_STACK_SIZE 0x100 +#define MICROBLAZE_SPL_STACK_SIZE 0x100 #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_INIT_RAM_ADDR - \ CONFIG_SYS_MALLOC_F_LEN - \ - CONFIG_SPL_STACK_SIZE) + MICROBLAZE_SPL_STACK_SIZE) #endif /* __CONFIG_H */ -- 2.7.4

1 0

[U-Boot] PHY less eth on x86 u-boot?
by Joakim Tjernlund 03 Feb '17

03 Feb '17

How does PHY less ethernet work on x86 u-boot? In powerpc we have the device tree where one can express a "fixed-link", does this work for x86 too? Jocke

1 0

[U-Boot] installing linux only (not crouton) on HP Chromebook 11
by Sean Felipe Wolfe 03 Feb '17

03 Feb '17

Hello! I own a couple HP Chromebook 11's, model SPRING-G3A-B3S-Q2F, the kind which only charge from the micro usb. I would like to erase ChromeOS and install only Linux. Is this possible? I've already installed Ubuntu via crouton, but I am curious if it is possible to lose the ChromeOS altogether. I have tried this script from John Lewis: https://johnlewis.ie/custom-chromebook-firmware/rom-download/ However, I believe because the HP CB11 uses the U-Boot bios, this script is not compatible. Any other options? If not that's ok ... they were cheap :) Thank you!

2 1

[U-Boot] [PATCH] ARM: dts: at91: add device tree files for at91sam9x5ek
by Wenyou Yang 03 Feb '17

03 Feb '17

The device tree source files of at91sam9x5ek board are copied from the Linux kernel, do the changes below. - Add the reg property for the pinctrl node. - Move the gpio (pioA, pioB, pioC ...) nodes as the pinctrl's slibling nodes, instead of the child nodes. - Change the compatible of the spi flash to "spi-flash". - Add spi0 aliases. - Fix the compile warnings. Signed-off-by: Wenyou Yang <wenyou.yang(a)atmel.com> --- arch/arm/dts/Makefile | 7 + arch/arm/dts/at91sam9g15.dtsi | 29 + arch/arm/dts/at91sam9g15ek.dts | 41 ++ arch/arm/dts/at91sam9g25.dtsi | 31 + arch/arm/dts/at91sam9g25ek.dts | 69 ++ arch/arm/dts/at91sam9g35.dtsi | 30 + arch/arm/dts/at91sam9g35ek.dts | 46 ++ arch/arm/dts/at91sam9x25.dtsi | 32 + arch/arm/dts/at91sam9x25ek.dts | 30 + arch/arm/dts/at91sam9x35.dtsi | 31 + arch/arm/dts/at91sam9x35ek.dts | 45 ++ arch/arm/dts/at91sam9x5.dtsi | 1292 +++++++++++++++++++++++++++++++++++ arch/arm/dts/at91sam9x5_can.dtsi | 71 ++ arch/arm/dts/at91sam9x5_isi.dtsi | 72 ++ arch/arm/dts/at91sam9x5_lcd.dtsi | 165 +++++ arch/arm/dts/at91sam9x5_macb0.dtsi | 67 ++ arch/arm/dts/at91sam9x5_macb1.dtsi | 55 ++ arch/arm/dts/at91sam9x5_usart3.dtsi | 69 ++ arch/arm/dts/at91sam9x5cm.dtsi | 100 +++ arch/arm/dts/at91sam9x5dm.dtsi | 101 +++ arch/arm/dts/at91sam9x5ek.dtsi | 165 +++++ 21 files changed, 2548 insertions(+) create mode 100644 arch/arm/dts/at91sam9g15.dtsi create mode 100644 arch/arm/dts/at91sam9g15ek.dts create mode 100644 arch/arm/dts/at91sam9g25.dtsi create mode 100644 arch/arm/dts/at91sam9g25ek.dts create mode 100644 arch/arm/dts/at91sam9g35.dtsi create mode 100644 arch/arm/dts/at91sam9g35ek.dts create mode 100644 arch/arm/dts/at91sam9x25.dtsi create mode 100644 arch/arm/dts/at91sam9x25ek.dts create mode 100644 arch/arm/dts/at91sam9x35.dtsi create mode 100644 arch/arm/dts/at91sam9x35ek.dts create mode 100644 arch/arm/dts/at91sam9x5.dtsi create mode 100644 arch/arm/dts/at91sam9x5_can.dtsi create mode 100644 arch/arm/dts/at91sam9x5_isi.dtsi create mode 100644 arch/arm/dts/at91sam9x5_lcd.dtsi create mode 100644 arch/arm/dts/at91sam9x5_macb0.dtsi create mode 100644 arch/arm/dts/at91sam9x5_macb1.dtsi create mode 100644 arch/arm/dts/at91sam9x5_usart3.dtsi create mode 100644 arch/arm/dts/at91sam9x5cm.dtsi create mode 100644 arch/arm/dts/at91sam9x5dm.dtsi create mode 100644 arch/arm/dts/at91sam9x5ek.dtsi diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 3ee608b5b4..276d543944 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -313,6 +313,13 @@ dtb-$(CONFIG_SOC_KEYSTONE) += k2hk-evm.dtb \ dtb-$(CONFIG_TARGET_SAMA5D2_XPLAINED) += \ at91-sama5d2_xplained.dtb +dtb-$(CONFIG_TARGET_AT91SAM9X5EK) += \ + at91sam9g15ek.dtb \ + at91sam9g25ek.dtb \ + at91sam9g35ek.dtb \ + at91sam9x25ek.dtb \ + at91sam9x35ek.dtb + dtb-$(CONFIG_ARCH_BCM283X) += \ bcm2835-rpi-a-plus.dtb \ bcm2835-rpi-a.dtb \ diff --git a/arch/arm/dts/at91sam9g15.dtsi b/arch/arm/dts/at91sam9g15.dtsi new file mode 100644 index 0000000000..27de7dc0f0 --- /dev/null +++ b/arch/arm/dts/at91sam9g15.dtsi @@ -0,0 +1,29 @@ +/* + * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj(a)jcrosoft.com> + * + * Licensed under GPLv2. + */ + +#include "at91sam9x5.dtsi" +#include "at91sam9x5_lcd.dtsi" + +/ { + model = "Atmel AT91SAM9G15 SoC"; + compatible = "atmel,at91sam9g15", "atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe0399f 0x00000000 /* pioA */ + 0x00040000 0x00047e3f 0x00000000 /* pioB */ + 0xfdffffff 0x00000000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/dts/at91sam9g15ek.dts b/arch/arm/dts/at91sam9g15ek.dts new file mode 100644 index 0000000000..d1d2b400f1 --- /dev/null +++ b/arch/arm/dts/at91sam9g15ek.dts @@ -0,0 +1,41 @@ +/* + * at91sam9g15ek.dts - Device Tree file for AT91SAM9G15-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre(a)atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "at91sam9g15.dtsi" +#include "at91sam9x5dm.dtsi" +#include "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9G15-EK"; + compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + ahb { + apb { + hlcdc: hlcdc@f8038000 { + status = "okay"; + }; + }; + }; + + backlight: backlight { + status = "okay"; + }; + + bl_reg: backlight_regulator { + status = "okay"; + }; + + panel: panel { + status = "okay"; + }; + + panel_reg: panel_regulator { + status = "okay"; + }; +}; diff --git a/arch/arm/dts/at91sam9g25.dtsi b/arch/arm/dts/at91sam9g25.dtsi new file mode 100644 index 0000000000..a7da0dd0c9 --- /dev/null +++ b/arch/arm/dts/at91sam9g25.dtsi @@ -0,0 +1,31 @@ +/* + * at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj(a)jcrosoft.com> + * + * Licensed under GPLv2. + */ + +#include "at91sam9x5.dtsi" +#include "at91sam9x5_isi.dtsi" +#include "at91sam9x5_usart3.dtsi" +#include "at91sam9x5_macb0.dtsi" + +/ { + model = "Atmel AT91SAM9G25 SoC"; + compatible = "atmel,at91sam9g25", "atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe0399f 0xc000001c /* pioA */ + 0x0007ffff 0x8000fe3f 0x00000000 /* pioB */ + 0x80000000 0x07c0ffff 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/dts/at91sam9g25ek.dts b/arch/arm/dts/at91sam9g25ek.dts new file mode 100644 index 0000000000..91a7177447 --- /dev/null +++ b/arch/arm/dts/at91sam9g25ek.dts @@ -0,0 +1,69 @@ +/* + * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre(a)atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "at91sam9g25.dtsi" +#include "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9G25-EK"; + compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + ahb { + apb { + spi0: spi@f0000000 { + status = "disabled"; + }; + + mmc1: mmc@f000c000 { + status = "disabled"; + }; + + i2c0: i2c@f8010000 { + ov2640: camera@0x30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; + resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>; + clocks = <&pck0>; + clock-names = "xvclk"; + assigned-clocks = <&pck0>; + assigned-clock-rates = <25000000>; + status = "okay"; + + port { + ov2640_0: endpoint { + remote-endpoint = <&isi_0>; + bus-width = <8>; + }; + }; + }; + }; + + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + isi: isi@f8048000 { + status = "okay"; + port { + isi_0: endpoint@0 { + reg = <0>; + remote-endpoint = <&ov2640_0>; + bus-width = <8>; + vsync-active = <1>; + hsync-active = <1>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/dts/at91sam9g35.dtsi b/arch/arm/dts/at91sam9g35.dtsi new file mode 100644 index 0000000000..ff4115886f --- /dev/null +++ b/arch/arm/dts/at91sam9g35.dtsi @@ -0,0 +1,30 @@ +/* + * at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj(a)jcrosoft.com> + * + * Licensed under GPLv2. + */ + +#include "at91sam9x5.dtsi" +#include "at91sam9x5_lcd.dtsi" +#include "at91sam9x5_macb0.dtsi" + +/ { + model = "Atmel AT91SAM9G35 SoC"; + compatible = "atmel,at91sam9g35", "atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe0399f 0xc000000c /* pioA */ + 0x000406ff 0x00047e3f 0x00000000 /* pioB */ + 0xfdffffff 0x00000000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/dts/at91sam9g35ek.dts b/arch/arm/dts/at91sam9g35ek.dts new file mode 100644 index 0000000000..23ec8b13f3 --- /dev/null +++ b/arch/arm/dts/at91sam9g35ek.dts @@ -0,0 +1,46 @@ +/* + * at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre(a)atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "at91sam9g35.dtsi" +#include "at91sam9x5dm.dtsi" +#include "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9G35-EK"; + compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + ahb { + apb { + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + hlcdc: hlcdc@f8038000 { + status = "okay"; + }; + }; + }; + + backlight: backlight { + status = "okay"; + }; + + bl_reg: backlight_regulator { + status = "okay"; + }; + + panel: panel { + status = "okay"; + }; + + panel_reg: panel_regulator { + status = "okay"; + }; +}; diff --git a/arch/arm/dts/at91sam9x25.dtsi b/arch/arm/dts/at91sam9x25.dtsi new file mode 100644 index 0000000000..3c5fa33889 --- /dev/null +++ b/arch/arm/dts/at91sam9x25.dtsi @@ -0,0 +1,32 @@ +/* + * at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj(a)jcrosoft.com> + * + * Licensed under GPLv2. + */ + +#include "at91sam9x5.dtsi" +#include "at91sam9x5_usart3.dtsi" +#include "at91sam9x5_macb0.dtsi" +#include "at91sam9x5_macb1.dtsi" +#include "at91sam9x5_can.dtsi" + +/ { + model = "Atmel AT91SAM9X25 SoC"; + compatible = "atmel,at91sam9x25", "atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe03fff 0xc000001c /* pioA */ + 0x0007ffff 0x00047e3f 0x00000000 /* pioB */ + 0x80000000 0xfffd0000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/dts/at91sam9x25ek.dts b/arch/arm/dts/at91sam9x25ek.dts new file mode 100644 index 0000000000..494864836e --- /dev/null +++ b/arch/arm/dts/at91sam9x25ek.dts @@ -0,0 +1,30 @@ +/* + * at91sam9x25ek.dts - Device Tree file for AT91SAM9X25-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre(a)atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "at91sam9x25.dtsi" +#include "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9X25-EK"; + compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + ahb { + apb { + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + macb1: ethernet@f8030000 { + phy-mode = "rmii"; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/dts/at91sam9x35.dtsi b/arch/arm/dts/at91sam9x35.dtsi new file mode 100644 index 0000000000..d9054e8167 --- /dev/null +++ b/arch/arm/dts/at91sam9x35.dtsi @@ -0,0 +1,31 @@ +/* + * at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj(a)jcrosoft.com> + * + * Licensed under GPLv2. + */ + +#include "at91sam9x5.dtsi" +#include "at91sam9x5_lcd.dtsi" +#include "at91sam9x5_macb0.dtsi" +#include "at91sam9x5_can.dtsi" + +/ { + model = "Atmel AT91SAM9X35 SoC"; + compatible = "atmel,at91sam9x35", "atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe03fff 0xc000000c /* pioA */ + 0x000406ff 0x00047e3f 0x00000000 /* pioB */ + 0xfdffffff 0x00000000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/dts/at91sam9x35ek.dts b/arch/arm/dts/at91sam9x35ek.dts new file mode 100644 index 0000000000..fcb67180ea --- /dev/null +++ b/arch/arm/dts/at91sam9x35ek.dts @@ -0,0 +1,45 @@ +/* + * at91sam9x35ek.dts - Device Tree file for AT91SAM9X35-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre(a)atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "at91sam9x35.dtsi" +#include "at91sam9x5dm.dtsi" +#include "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9X35-EK"; + compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + ahb { + apb { + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + hlcdc: hlcdc@f8038000 { + status = "okay"; + }; + }; + }; + + backlight: backlight { + status = "okay"; + }; + + bl_reg: backlight_regulator { + status = "okay"; + }; + + panel: panel { + status = "okay"; + }; + + panel_reg: panel_regulator { + status = "okay"; + }; +}; diff --git a/arch/arm/dts/at91sam9x5.dtsi b/arch/arm/dts/at91sam9x5.dtsi new file mode 100644 index 0000000000..a5f836a5ac --- /dev/null +++ b/arch/arm/dts/at91sam9x5.dtsi @@ -0,0 +1,1292 @@ +/* + * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC + * applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35, + * AT91SAM9X25, AT91SAM9X35 SoC + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre(a)atmel.com> + * + * Licensed under GPLv2 or later. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/dma/at91.h> +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/at91.h> + +/ { + model = "Atmel AT91SAM9x5 family SoC"; + compatible = "atmel,at91sam9x5"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + tcb0 = &tcb0; + tcb1 = &tcb1; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + ssc0 = &ssc0; + pwm0 = &pwm0; + spi0 = &spi0; + }; + + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + }; + }; + + memory { + reg = <0x20000000 0x10000000>; + }; + + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + }; + }; + + sram: sram@00300000 { + compatible = "mmio-sram"; + reg = <0x00300000 0x8000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <3>; + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; + }; + + ramc0: ramc@ffffe800 { + compatible = "atmel,at91sam9g45-ddramc"; + reg = <0xffffe800 0x200>; + clocks = <&ddrck>; + clock-names = "ddrck"; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91sam9x5-pmc", "syscon"; + reg = <0xfffffc00 0x200>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + main_rc_osc: main_rc_osc { + compatible = "atmel,at91sam9x5-clk-main-rc-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCRCS>; + clock-frequency = <12000000>; + clock-accuracy = <50000000>; + }; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91sam9x5-clk-main"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCSELS>; + clocks = <&main_rc_osc>, <&main_osc>; + }; + + plla: pllack@0 { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <2000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <745000000 800000000 0 0 + 695000000 750000000 1 0 + 645000000 700000000 2 0 + 595000000 650000000 3 0 + 545000000 600000000 0 1 + 495000000 555000000 1 1 + 445000000 500000000 2 1 + 400000000 450000000 3 1>; + }; + + plladiv: plladivck { + compatible = "atmel,at91sam9x5-clk-plldiv"; + #clock-cells = <0>; + clocks = <&plla>; + }; + + utmi: utmick { + compatible = "atmel,at91sam9x5-clk-utmi"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKU>; + clocks = <&main>; + }; + + mck: masterck { + compatible = "atmel,at91sam9x5-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; + atmel,clk-output-range = <0 133333333>; + atmel,clk-divisors = <1 2 4 3>; + atmel,master-clk-have-div3-pres; + }; + + usb: usbck { + compatible = "atmel,at91sam9x5-clk-usb"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + prog: progck { + compatible = "atmel,at91sam9x5-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; + + prog0: prog@0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog@1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + }; + + smd: smdclk { + compatible = "atmel,at91sam9x5-clk-smd"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + ddrck: ddrck@2 { + #clock-cells = <0>; + reg = <2>; + clocks = <&mck>; + }; + + smdck: smdck@4 { + #clock-cells = <0>; + reg = <4>; + clocks = <&smd>; + }; + + uhpck: uhpck@6 { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck: udpck@7 { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + + pck0: pck0@8 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1@9 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + }; + + periphck { + compatible = "atmel,at91sam9x5-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioAB_clk: pioAB_clk@2 { + #clock-cells = <0>; + reg = <2>; + }; + + pioCD_clk: pioCD_clk@3 { + #clock-cells = <0>; + reg = <3>; + }; + + smd_clk: smd_clk@4 { + #clock-cells = <0>; + reg = <4>; + }; + + usart0_clk: usart0_clk@5 { + #clock-cells = <0>; + reg = <5>; + }; + + usart1_clk: usart1_clk@6 { + #clock-cells = <0>; + reg = <6>; + }; + + usart2_clk: usart2_clk@7 { + #clock-cells = <0>; + reg = <7>; + }; + + twi0_clk: twi0_clk@9 { + reg = <9>; + #clock-cells = <0>; + }; + + twi1_clk: twi1_clk@10 { + #clock-cells = <0>; + reg = <10>; + }; + + twi2_clk: twi2_clk@11 { + #clock-cells = <0>; + reg = <11>; + }; + + mci0_clk: mci0_clk@12 { + #clock-cells = <0>; + reg = <12>; + }; + + spi0_clk: spi0_clk@13 { + #clock-cells = <0>; + reg = <13>; + }; + + spi1_clk: spi1_clk@14 { + #clock-cells = <0>; + reg = <14>; + }; + + uart0_clk: uart0_clk@15 { + #clock-cells = <0>; + reg = <15>; + }; + + uart1_clk: uart1_clk@16 { + #clock-cells = <0>; + reg = <16>; + }; + + tcb0_clk: tcb0_clk@17 { + #clock-cells = <0>; + reg = <17>; + }; + + pwm_clk: pwm_clk@18 { + #clock-cells = <0>; + reg = <18>; + }; + + adc_clk: adc_clk@19 { + #clock-cells = <0>; + reg = <19>; + }; + + dma0_clk: dma0_clk@20 { + #clock-cells = <0>; + reg = <20>; + }; + + dma1_clk: dma1_clk@21 { + #clock-cells = <0>; + reg = <21>; + }; + + uhphs_clk: uhphs_clk@22 { + #clock-cells = <0>; + reg = <22>; + }; + + udphs_clk: udphs_clk@23 { + #clock-cells = <0>; + reg = <23>; + }; + + mci1_clk: mci1_clk@26 { + #clock-cells = <0>; + reg = <26>; + }; + + ssc0_clk: ssc0_clk@28 { + #clock-cells = <0>; + reg = <28>; + }; + }; + }; + + rstc@fffffe00 { + compatible = "atmel,at91sam9g45-rstc"; + reg = <0xfffffe00 0x10>; + clocks = <&clk32k>; + }; + + shdwc@fffffe10 { + compatible = "atmel,at91sam9x5-shdwc"; + reg = <0xfffffe10 0x10>; + clocks = <&clk32k>; + }; + + pit: timer@fffffe30 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfffffe30 0xf>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; + }; + + sckc@fffffe50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffe50 0x4>; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + clocks = <&slow_xtal>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc>, <&slow_osc>; + }; + }; + + tcb0: timer@f8008000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xf8008000 0x100>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + }; + + tcb1: timer@f800c000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xf800c000 0x100>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + }; + + dma0: dma-controller@ffffec00 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffec00 0x200>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <2>; + clocks = <&dma0_clk>; + clock-names = "dma_clk"; + }; + + dma1: dma-controller@ffffee00 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffee00 0x200>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <2>; + clocks = <&dma1_clk>; + clock-names = "dma_clk"; + }; + + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x800>; + reg = <0xfffff400 0x200 /* pioA */ + 0xfffff600 0x200 /* pioB */ + 0xfffff800 0x200 /* pioC */ + 0xfffffa00 0x200 /* pioD */ + >; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA0 periph A with pullup */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA1 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA3 periph A */ + }; + + pinctrl_usart0_sck: usart0_sck-0 { + atmel,pins = + <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA4 periph A */ + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA5 periph A with pullup */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA6 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC27 periph C */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C */ + }; + + pinctrl_usart1_sck: usart1_sck-0 { + atmel,pins = + <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ + }; + + pinctrl_usart2_sck: usart2_sck-0 { + atmel,pins = + <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB2 periph B */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC8 periph C */ + AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; /* PC9 periph C with pullup */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC16 periph C */ + AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; /* PC17 periph C with pullup */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A Read Enable */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A Write Enable */ + AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD2 periph A Address Latch Enable */ + AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A Command Latch Enable */ + AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD4 gpio Chip Enable pin pull_up */ + AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD5 gpio RDY/BUSY pin pull_up */ + AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD6 periph A Data bit 0 */ + AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD7 periph A Data bit 1 */ + AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD8 periph A Data bit 2 */ + AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A Data bit 3 */ + AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A Data bit 4 */ + AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A Data bit 5 */ + AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD12 periph A Data bit 6 */ + AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD13 periph A Data bit 7 */ + }; + + pinctrl_nand_16bits: nand_16bits-0 { + atmel,pins = + <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD14 periph A Data bit 8 */ + AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD15 periph A Data bit 9 */ + AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD16 periph A Data bit 10 */ + AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD17 periph A Data bit 11 */ + AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD18 periph A Data bit 12 */ + AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD19 periph A Data bit 13 */ + AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD20 periph A Data bit 14 */ + AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A Data bit 15 */ + }; + }; + + mmc0 { + pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { + atmel,pins = + <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA15 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */ + }; + }; + + mmc1 { + pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { + atmel,pins = + <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA13 periph B */ + AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA12 periph B with pullup */ + AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA11 periph B with pullup */ + }; + + pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { + atmel,pins = + <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA2 periph B with pullup */ + AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA3 periph B with pullup */ + AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA4 periph B with pullup */ + }; + }; + + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ + }; + }; + + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A SPI0_MISO pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A SPI0_MOSI pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA21 periph B SPI1_MISO pin */ + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B SPI1_MOSI pin */ + AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */ + }; + }; + + i2c0 { + pinctrl_i2c0: i2c0-0 { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A I2C0 data */ + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A I2C0 clock */ + }; + }; + + i2c1 { + pinctrl_i2c1: i2c1-0 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC0 periph C I2C1 data */ + AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC1 periph C I2C1 clock */ + }; + }; + + i2c2 { + pinctrl_i2c2: i2c2-0 { + atmel,pins = + <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB4 periph B I2C2 data */ + AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB5 periph B I2C2 clock */ + }; + }; + + i2c_gpio0 { + pinctrl_i2c_gpio0: i2c_gpio0-0 { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA30 gpio multidrive I2C0 data */ + AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PA31 gpio multidrive I2C0 clock */ + }; + }; + + i2c_gpio1 { + pinctrl_i2c_gpio1: i2c_gpio1-0 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PC0 gpio multidrive I2C1 data */ + AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PC1 gpio multidrive I2C1 clock */ + }; + }; + + i2c_gpio2 { + pinctrl_i2c_gpio2: i2c_gpio2-0 { + atmel,pins = + <AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PB4 gpio multidrive I2C2 data */ + AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB5 gpio multidrive I2C2 clock */ + }; + }; + + pwm0 { + pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 { + atmel,pins = + <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 { + atmel,pins = + <AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 { + atmel,pins = + <AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 { + atmel,pins = + <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 { + atmel,pins = + <AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 { + atmel,pins = + <AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 { + atmel,pins = + <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 { + atmel,pins = + <AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 { + atmel,pins = + <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 { + atmel,pins = + <AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + }; + + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + tcb1 { + pinctrl_tcb1_tclk0: tcb1_tclk0-0 { + atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk1: tcb1_tclk1-0 { + atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk2: tcb1_tclk2-0 { + atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa0: tcb1_tioa0-0 { + atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa1: tcb1_tioa1-0 { + atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa2: tcb1_tioa2-0 { + atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob0: tcb1_tiob0-0 { + atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob1: tcb1_tiob1-0 { + atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob2: tcb1_tiob2-0 { + atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioAB_clk>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <19>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioAB_clk>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioCD_clk>; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <22>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioCD_clk>; + }; + + ssc0: ssc@f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>, + <&dma0 1 AT91_DMA_CFG_PER_ID(14)>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; + status = "disabled"; + }; + + mmc0: mmc@f0008000 { + compatible = "atmel,hsmci"; + reg = <0xf0008000 0x600>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>; + dma-names = "rxtx"; + pinctrl-names = "default"; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mmc1: mmc@f000c000 { + compatible = "atmel,hsmci"; + reg = <0xf000c000 0x600>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>; + dma-names = "rxtx"; + pinctrl-names = "default"; + clocks = <&mci1_clk>; + clock-names = "mci_clk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + dbgu: serial@fffff200 { + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + reg = <0xfffff200 0x200>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>, + <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; + clocks = <&mck>; + clock-names = "usart"; + status = "disabled"; + }; + + usart0: serial@f801c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf801c000 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>, + <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; + clocks = <&usart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart1: serial@f8020000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8020000 0x200>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>, + <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; + clocks = <&usart1_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart2: serial@f8024000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8024000 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>, + <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; + clocks = <&usart2_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + i2c0: i2c@f8010000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf8010000 0x100>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>, + <&dma0 1 AT91_DMA_CFG_PER_ID(8)>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&twi0_clk>; + status = "disabled"; + }; + + i2c1: i2c@f8014000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf8014000 0x100>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>, + <&dma1 1 AT91_DMA_CFG_PER_ID(6)>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&twi1_clk>; + status = "disabled"; + }; + + i2c2: i2c@f8018000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf8018000 0x100>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>, + <&dma0 1 AT91_DMA_CFG_PER_ID(10)>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&twi2_clk>; + status = "disabled"; + }; + + uart0: serial@f8040000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8040000 0x200>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&uart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + uart1: serial@f8044000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8044000 0x200>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&uart1_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + adc0: adc@f804c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9x5-adc"; + reg = <0xf804c000 0x100>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&adc_clk>, + <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; + atmel,adc-use-external-triggers; + atmel,adc-channels-used = <0xffff>; + atmel,adc-vref = <3300>; + atmel,adc-startup-time = <40>; + atmel,adc-sample-hold-time = <11>; + atmel,adc-res = <8 10>; + atmel,adc-res-names = "lowres", "highres"; + atmel,adc-use-res = "highres"; + + trigger0 { + trigger-name = "external-rising"; + trigger-value = <0x1>; + trigger-external; + }; + + trigger1 { + trigger-name = "external-falling"; + trigger-value = <0x2>; + trigger-external; + }; + + trigger2 { + trigger-name = "external-any"; + trigger-value = <0x3>; + trigger-external; + }; + + trigger3 { + trigger-name = "continuous"; + trigger-value = <0x6>; + }; + }; + + spi0: spi@f0000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xf0000000 0x100>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>, + <&dma0 1 AT91_DMA_CFG_PER_ID(2)>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + + spi1: spi@f0004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xf0004000 0x100>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>, + <&dma1 1 AT91_DMA_CFG_PER_ID(2)>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + + usb2: gadget@f803c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9g45-udc"; + reg = <0x00500000 0x80000 + 0xf803c000 0x400>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&utmi>, <&udphs_clk>; + clock-names = "hclk", "pclk"; + status = "disabled"; + + ep@0 { + reg = <0>; + atmel,fifo-size = <64>; + atmel,nb-banks = <1>; + }; + + ep@1 { + reg = <1>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep@2 { + reg = <2>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep@3 { + reg = <3>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep@4 { + reg = <4>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep@5 { + reg = <5>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep@6 { + reg = <6>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + }; + + watchdog@fffffe40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffe40 0x10>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; + atmel,watchdog-type = "hardware"; + atmel,reset-type = "all"; + atmel,dbg-halt; + status = "disabled"; + }; + + rtc@fffffeb0 { + compatible = "atmel,at91sam9x5-rtc"; + reg = <0xfffffeb0 0x40>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; + status = "disabled"; + }; + + pwm0: pwm@f8034000 { + compatible = "atmel,at91sam9rl-pwm"; + reg = <0xf8034000 0x300>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; + clocks = <&pwm_clk>; + #pwm-cells = <3>; + status = "disabled"; + }; + }; + + nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x10000000 + 0xffffe000 0x600 /* PMECC Registers */ + 0xffffe600 0x200 /* PMECC Error Location Registers */ + 0x00108000 0x18000 /* PMECC looup table in ROM code */ + >; + atmel,pmecc-lookup-table-offset = <0x0 0x8000>; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + atmel,nand-has-dma; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + gpios = <&pioD 5 GPIO_ACTIVE_HIGH + &pioD 4 GPIO_ACTIVE_HIGH + 0 + >; + status = "disabled"; + }; + + usb0: ohci@00600000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00600000 0x100000>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; + status = "disabled"; + }; + + usb1: ehci@00700000 { + compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; + reg = <0x00700000 0x100000>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&utmi>, <&uhphs_clk>; + clock-names = "usb_clk", "ehci_clk"; + status = "disabled"; + }; + }; + + i2c-gpio-0 { + compatible = "i2c-gpio"; + gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ + &pioA 31 GPIO_ACTIVE_HIGH /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio0>; + status = "disabled"; + }; + + i2c-gpio-1 { + compatible = "i2c-gpio"; + gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */ + &pioC 1 GPIO_ACTIVE_HIGH /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio1>; + status = "disabled"; + }; + + i2c-gpio-2 { + compatible = "i2c-gpio"; + gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ + &pioB 5 GPIO_ACTIVE_HIGH /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio2>; + status = "disabled"; + }; +}; diff --git a/arch/arm/dts/at91sam9x5_can.dtsi b/arch/arm/dts/at91sam9x5_can.dtsi new file mode 100644 index 0000000000..9727b771d1 --- /dev/null +++ b/arch/arm/dts/at91sam9x5_can.dtsi @@ -0,0 +1,71 @@ +/* + * at91sam9x5_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1 + * Ethernet interface. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon(a)overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pmc: pmc@fffffc00 { + periphck { + can0_clk: can0_clk@29 { + #clock-cells = <0>; + reg = <29>; + }; + + can1_clk: can1_clk@30 { + #clock-cells = <0>; + reg = <30>; + }; + }; + }; + + can0: can@f8000000 { + compatible = "atmel,at91sam9x5-can"; + reg = <0xf8000000 0x300>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_rx_tx>; + clocks = <&can0_clk>; + clock-names = "can_clk"; + status = "disabled"; + }; + + can1: can@f8004000 { + compatible = "atmel,at91sam9x5-can"; + reg = <0xf8004000 0x300>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_rx_tx>; + clocks = <&can1_clk>; + clock-names = "can_clk"; + status = "disabled"; + }; + + pinctrl@fffff400 { + can0 { + pinctrl_can0_rx_tx: can0_rx_tx { + atmel,pins = + <AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANRX0, conflicts with DRXD */ + AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* CANTX0, conflicts with DTXD */ + }; + }; + + can1 { + pinctrl_can1_rx_tx: can1_rx_tx { + atmel,pins = + <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANRX1, conflicts with RXD1 */ + AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* CANTX1, conflicts with TXD1 */ + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/dts/at91sam9x5_isi.dtsi b/arch/arm/dts/at91sam9x5_isi.dtsi new file mode 100644 index 0000000000..2c5075f8c3 --- /dev/null +++ b/arch/arm/dts/at91sam9x5_isi.dtsi @@ -0,0 +1,72 @@ +/* + * at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an + * Image Sensor Interface. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon(a)overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff400 { + isi { + pinctrl_isi_data_0_7: isi-0-data-0-7 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D0, conflicts with LCDDAT0 */ + AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D1, conflicts with LCDDAT1 */ + AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D2, conflicts with LCDDAT2 */ + AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D3, conflicts with LCDDAT3 */ + AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D4, conflicts with LCDDAT4 */ + AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D5, conflicts with LCDDAT5 */ + AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D6, conflicts with LCDDAT6 */ + AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D7, conflicts with LCDDAT7 */ + AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_PCK, conflicts with LCDDAT12 */ + AT91_PIOC 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_HSYNC, conflicts with LCDDAT14 */ + AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* ISI_VSYNC, conflicts with LCDDAT13 */ + }; + + pinctrl_isi_data_8_9: isi-0-data-8-9 { + atmel,pins = + <AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D8, conflicts with LCDDAT8 */ + AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* ISI_D9, conflicts with LCDDAT9 */ + }; + + pinctrl_isi_data_10_11: isi-0-data-10-11 { + atmel,pins = + <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D10, conflicts with LCDDAT10 */ + AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* ISI_D11, conflicts with LCDDAT11 */ + }; + }; + }; + + pmc: pmc@fffffc00 { + periphck { + isi_clk: isi_clk@25 { + #clock-cells = <0>; + reg = <25>; + }; + }; + }; + + isi: isi@f8048000 { + compatible = "atmel,at91sam9g45-isi"; + reg = <0xf8048000 0x4000>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_isi_data_0_7>; + clocks = <&isi_clk>; + clock-names = "isi_clk"; + status = "disabled"; + port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + }; +}; diff --git a/arch/arm/dts/at91sam9x5_lcd.dtsi b/arch/arm/dts/at91sam9x5_lcd.dtsi new file mode 100644 index 0000000000..41e87589fb --- /dev/null +++ b/arch/arm/dts/at91sam9x5_lcd.dtsi @@ -0,0 +1,165 @@ +/* + * at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an + * LCD controller. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon(a)overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + hlcdc: hlcdc@f8038000 { + compatible = "atmel,at91sam9x5-hlcdc"; + reg = <0xf8038000 0x4000>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + status = "disabled"; + + hlcdc-display-controller { + compatible = "atmel,hlcdc-display-controller"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + }; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + }; + + pinctrl@fffff400 { + lcd { + pinctrl_lcd_base: lcd-base-0 { + atmel,pins = + <AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDVSYNC */ + AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDHSYNC */ + AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDISP */ + AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDEN */ + AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPCK */ + }; + + pinctrl_lcd_pwm: lcd-pwm-0 { + atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPWM */ + }; + + pinctrl_lcd_rgb444: lcd-rgb-0 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD11 pin */ + }; + + pinctrl_lcd_rgb565: lcd-rgb-1 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD15 pin */ + }; + + pinctrl_lcd_rgb666: lcd-rgb-2 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */ + AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD17 pin */ + }; + + pinctrl_lcd_rgb888: lcd-rgb-3 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */ + AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */ + AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */ + AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */ + AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */ + AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */ + AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */ + AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */ + }; + }; + }; + + pmc: pmc@fffffc00 { + periphck { + lcdc_clk: lcdc_clk@25 { + #clock-cells = <0>; + reg = <25>; + }; + }; + + systemck { + lcdck: lcdck@3 { + #clock-cells = <0>; + reg = <3>; + clocks = <&mck>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/dts/at91sam9x5_macb0.dtsi b/arch/arm/dts/at91sam9x5_macb0.dtsi new file mode 100644 index 0000000000..1540e60232 --- /dev/null +++ b/arch/arm/dts/at91sam9x5_macb0.dtsi @@ -0,0 +1,67 @@ +/* + * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1 + * Ethernet interface. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon(a)overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff400 { + macb0 { + pinctrl_macb0_rmii: macb0_rmii-0 { + atmel,pins = + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */ + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */ + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */ + }; + + pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { + atmel,pins = + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */ + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */ + }; + }; + }; + + pmc: pmc@fffffc00 { + periphck { + macb0_clk: macb0_clk@24 { + #clock-cells = <0>; + reg = <24>; + }; + }; + }; + + macb0: ethernet@f802c000 { + compatible = "cdns,at91sam9260-macb", "cdns,macb"; + reg = <0xf802c000 0x100>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_rmii>; + clocks = <&macb0_clk>, <&macb0_clk>; + clock-names = "hclk", "pclk"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/dts/at91sam9x5_macb1.dtsi b/arch/arm/dts/at91sam9x5_macb1.dtsi new file mode 100644 index 0000000000..be2eab4b9c --- /dev/null +++ b/arch/arm/dts/at91sam9x5_macb1.dtsi @@ -0,0 +1,55 @@ +/* + * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2 + * Ethernet interfaces. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon(a)overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff400 { + macb1 { + pinctrl_macb1_rmii: macb1_rmii-0 { + atmel,pins = + <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */ + AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */ + AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */ + AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */ + AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */ + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */ + AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */ + AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */ + AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */ + AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */ + }; + }; + }; + + pmc: pmc@fffffc00 { + periphck { + macb1_clk: macb1_clk@27 { + #clock-cells = <0>; + reg = <27>; + }; + }; + }; + + macb1: ethernet@f8030000 { + compatible = "cdns,at91sam9260-macb", "cdns,macb"; + reg = <0xf8030000 0x100>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb1_rmii>; + clocks = <&macb1_clk>, <&macb1_clk>; + clock-names = "hclk", "pclk"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/dts/at91sam9x5_usart3.dtsi b/arch/arm/dts/at91sam9x5_usart3.dtsi new file mode 100644 index 0000000000..5259219077 --- /dev/null +++ b/arch/arm/dts/at91sam9x5_usart3.dtsi @@ -0,0 +1,69 @@ +/* + * at91sam9x5_usart3.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * 4 USART. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon(a)overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + aliases { + serial4 = &usart3; + }; + + ahb { + apb { + pinctrl@fffff400 { + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */ + AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */ + }; + + pinctrl_usart3_sck: usart3_sck-0 { + atmel,pins = + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */ + }; + }; + }; + + pmc: pmc@fffffc00 { + periphck { + usart3_clk: usart3_clk@8 { + #clock-cells = <0>; + reg = <8>; + }; + }; + }; + + usart3: serial@f8028000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8028000 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>, + <&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; + clocks = <&usart3_clk>; + clock-names = "usart"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/dts/at91sam9x5cm.dtsi b/arch/arm/dts/at91sam9x5cm.dtsi new file mode 100644 index 0000000000..b098ad8cd9 --- /dev/null +++ b/arch/arm/dts/at91sam9x5cm.dtsi @@ -0,0 +1,100 @@ +/* + * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre(a)atmel.com> + * + * Licensed under GPLv2 or later. + */ + +/ { + memory { + reg = <0x20000000 0x8000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + pinctrl@fffff400 { + 1wire_cm { + pinctrl_1wire_cm: 1wire_cm-0 { + atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */ + }; + }; + }; + + rtc@fffffeb0 { + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; /* Enable PMECC */ + atmel,pmecc-cap = <2>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "u-boot"; + reg = <0x40000 0x80000>; + }; + + ubootenv@c0000 { + label = "U-Boot Env"; + reg = <0xc0000 0x140000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x1f800000>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + pb18 { + label = "pb18"; + gpios = <&pioB 18 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + pd21 { + label = "pd21"; + gpios = <&pioD 21 GPIO_ACTIVE_HIGH>; + }; + }; + + 1wire_cm { + compatible = "w1-gpio"; + gpios = <&pioB 18 GPIO_ACTIVE_HIGH>; + linux,open-drain; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_1wire_cm>; + status = "okay"; + }; + +}; diff --git a/arch/arm/dts/at91sam9x5dm.dtsi b/arch/arm/dts/at91sam9x5dm.dtsi new file mode 100644 index 0000000000..34c089fe0b --- /dev/null +++ b/arch/arm/dts/at91sam9x5dm.dtsi @@ -0,0 +1,101 @@ +/* + * at91sam9x5dm.dtsi - Device Tree file for SAM9x5 display module + * + * Copyright (C) 2014 Atmel, + * 2014 Free Electrons + * + * Author: Boris Brezillon <boris.brezillon(a)free-electrons.com> + * + * Licensed under GPLv2 or later. + */ + +/ { + ahb { + apb { + i2c0: i2c@f8010000 { + qt1070: keyboard@1b { + compatible = "qt1070"; + reg = <0x1b>; + interrupt-parent = <&pioA>; + interrupts = <7 0x0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qt1070_irq>; + wakeup-source; + }; + }; + + hlcdc: hlcdc@f8038000 { + hlcdc-display-controller { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + + port@0 { + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + }; + + adc0: adc@f804c000 { + atmel,adc-ts-wires = <4>; + atmel,adc-ts-pressure-threshold = <10000>; + status = "okay"; + }; + + pinctrl@fffff400 { + board { + pinctrl_qt1070_irq: qt1070_irq { + atmel,pins = + <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + }; + }; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&hlcdc_pwm 0 50000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + power-supply = <&bl_reg>; + status = "disabled"; + }; + + bl_reg: backlight_regulator { + compatible = "regulator-fixed"; + regulator-name = "backlight-power-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + status = "disabled"; + }; + + panel: panel { + compatible = "foxlink,fl500wvr00-a0t", "simple-panel"; + backlight = <&backlight>; + power-supply = <&panel_reg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&hlcdc_panel_output>; + }; + }; + }; + + panel_reg: panel_regulator { + compatible = "regulator-fixed"; + regulator-name = "panel-power-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + status = "disabled"; + }; +}; diff --git a/arch/arm/dts/at91sam9x5ek.dtsi b/arch/arm/dts/at91sam9x5ek.dtsi new file mode 100644 index 0000000000..0f1fcd9c28 --- /dev/null +++ b/arch/arm/dts/at91sam9x5ek.dtsi @@ -0,0 +1,165 @@ +/* + * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre(a)atmel.com> + * + * Licensed under GPLv2 or later. + */ +#include "at91sam9x5cm.dtsi" + +/ { + model = "Atmel AT91SAM9X5-EK"; + compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + chosen { + bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + stdout-path = "serial0:115200n8"; + }; + + ahb { + apb { + mmc0: mmc@f0008000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; + }; + }; + + mmc1: mmc@f000c000 { + pinctrl-0 = < + &pinctrl_board_mmc1 + &pinctrl_mmc1_slot0_clk_cmd_dat0 + &pinctrl_mmc1_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>; + }; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart0: serial@f801c000 { + status = "okay"; + }; + + usb2: gadget@f803c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_board_usb2>; + atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + i2c0: i2c@f8010000 { + status = "okay"; + + wm8731: wm8731@1a { + compatible = "wm8731"; + reg = <0x1a>; + }; + }; + + adc0: adc@f804c000 { + atmel,adc-ts-wires = <4>; + atmel,adc-ts-pressure-threshold = <10000>; + status = "okay"; + }; + + pinctrl@fffff400 { + camera_sensor { + pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 { + atmel,pins = + <AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_MCK */ + }; + + pinctrl_sensor_power: sensor_power-0 { + atmel,pins = + <AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_sensor_reset: sensor_reset-0 { + atmel,pins = + <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; + + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */ + }; + }; + + mmc1 { + pinctrl_board_mmc1: mmc1-board { + atmel,pins = + <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */ + }; + }; + + usb2 { + pinctrl_board_usb2: usb2-board { + atmel,pins = + <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB16 gpio vbus sense, deglitch */ + }; + }; + }; + + spi0: spi@f0000000 { + status = "okay"; + cs-gpios = <&pioA 14 0>, <0>, <0>, <0>; + spi_flash@0 { + compatible = "spi-flash"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + + ssc0: ssc@f0010000 { + status = "okay"; + }; + }; + + usb0: ohci@00600000 { + status = "okay"; + num-ports = <3>; + atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */ + &pioD 19 GPIO_ACTIVE_LOW + &pioD 20 GPIO_ACTIVE_LOW + >; + }; + + usb1: ehci@00700000 { + status = "okay"; + }; + }; + + sound { + compatible = "atmel,sam9x5-wm8731-audio"; + + atmel,model = "wm8731 @ AT91SAM9X5EK"; + + atmel,audio-routing = + "Headphone Jack", "RHPOUT", + "Headphone Jack", "LHPOUT", + "LLINEIN", "Line In Jack", + "RLINEIN", "Line In Jack"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8731>; + }; +}; -- 2.11.0

1 0

[U-Boot] [PATCH] drivers: net: phy: atheros: apply the previous register setting for AR8031 to fix the voltage peak issue
by ken <Ken Lin> 03 Feb '17

03 Feb '17

Apply the previous setting for the reserved bits in SetDes Test and System Mode Control register to avoid the voltage peak issue while we do the IEEE PHY comformance test Signed-off-by: ken Lin <ken.lin(a)advantech.com> Tested on Advantech DMS-BA16 board Tested-by: Ken Lin <ken.lin(a)advantech.com> --- drivers/net/phy/atheros.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c index b34cdd3d87..82fe228604 100644 --- a/drivers/net/phy/atheros.c +++ b/drivers/net/phy/atheros.c @@ -28,6 +28,8 @@ static int ar8021_config(struct phy_device *phydev) static int ar8031_config(struct phy_device *phydev) { + int regval; + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID || phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) { phy_write(phydev, MDIO_DEVAD_NONE, AR803x_PHY_DEBUG_ADDR_REG, @@ -44,6 +46,10 @@ static int ar8031_config(struct phy_device *phydev) AR803x_RGMII_RX_CLK_DLY); } + phy_write(phydev, MDIO_DEVAD_NONE, AR803x_PHY_DEBUG_ADDR_REG, AR803x_DEBUG_REG_5); + regval = phy_read(phydev, MDIO_DEVAD_NONE, AR803x_PHY_DEBUG_DATA_REG); + phy_write(phydev, MDIO_DEVAD_NONE, AR803x_PHY_DEBUG_DATA_REG, regval | 0x3C47); + phydev->supported = phydev->drv->features; genphy_config_aneg(phydev); -- 2.11.0

2 1

[U-Boot] [PATCH v4] dm/mmc: gen_atmel_mci: Add driver model support for mci
by Wenyou Yang 03 Feb '17

03 Feb '17

Add the driver model support for Atmel mci while retaining the existing legacy code. This allows the driver to support boards that have converted to driver model as well as those that have not. Signed-off-by: Wenyou Yang <wenyou.yang(a)atmel.com> --- Changes in v4: - Remove unneeded #ifdef CONFIG_DM_MMC. Changes in v3: - Use unified #ifdef CONFIG_DM_MMC #else...#endif, instead of #ifndef CONFIG_DM_MMC #else...#endif. Changes in v2: - Change the return type of atmel_mci_setup_cfg() from int to void. - Add comments on the features depends on the IP version. - Add the error handle path of clock. - Fix the missing use priv->bus_clk_rate. - Return from mmc_bind() directly, instead of checking its return. drivers/mmc/Kconfig | 9 +++ drivers/mmc/gen_atmel_mci.c | 162 +++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 170 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index c3462ab724..198aab8a26 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -68,6 +68,15 @@ config ATMEL_SDHCI It is compliant with the SD Host Controller Standard V3.0 specification. +config GENERIC_ATMEL_MCI + bool "Atmel Multimedia Card Interface support" + depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91 + help + This enables support for Atmel High Speed Multimedia Card Interface + (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3, + the SD Memory Card Specification V2.0, the SDIO V2.0 specification + and CE-ATA V1.1. + config ROCKCHIP_DWMMC bool "Rockchip SD/MMC controller support" depends on DM_MMC && OF_CONTROL diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c index cca0b04a60..328c5ae11a 100644 --- a/drivers/mmc/gen_atmel_mci.c +++ b/drivers/mmc/gen_atmel_mci.c @@ -10,6 +10,7 @@ */ #include <common.h> +#include <clk.h> #include <mmc.h> #include <part.h> #include <malloc.h> @@ -18,8 +19,11 @@ #include <asm/byteorder.h> #include <asm/arch/clk.h> #include <asm/arch/hardware.h> +#include <dm/device.h> #include "atmel_mci.h" +DECLARE_GLOBAL_DATA_PTR; + #ifndef CONFIG_SYS_MMC_CLK_OD # define CONFIG_SYS_MMC_CLK_OD 150000 #endif @@ -37,6 +41,10 @@ struct atmel_mci_priv { struct atmel_mci *mci; unsigned int initialized:1; unsigned int curr_clk; +#ifdef CONFIG_DM_MMC + struct mmc mmc; + ulong bus_clk_rate; +#endif }; /* Read Atmel MCI IP version */ @@ -58,11 +66,19 @@ static void dump_cmd(u32 cmdr, u32 arg, u32 status, const char* msg) } /* Setup for MCI Clock and Block Size */ +#ifdef CONFIG_DM_MMC +static void mci_set_mode(struct atmel_mci_priv *priv, u32 hz, u32 blklen) +{ + struct mmc *mmc = &priv->mmc; + u32 bus_hz = priv->bus_clk_rate; +#else static void mci_set_mode(struct mmc *mmc, u32 hz, u32 blklen) { struct atmel_mci_priv *priv = mmc->priv; - atmel_mci_t *mci = priv->mci; u32 bus_hz = get_mci_clk_rate(); +#endif + + atmel_mci_t *mci = priv->mci; u32 clkdiv = 255; unsigned int version = atmel_mci_get_version(mci); u32 clkodd = 0; @@ -202,10 +218,18 @@ io_fail: * Sends a command out on the bus and deals with the block data. * Takes the mmc pointer, a command pointer, and an optional data pointer. */ +#ifdef CONFIG_DM_MMC +static int atmel_mci_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + struct atmel_mci_priv *priv = dev_get_priv(dev); + struct mmc *mmc = mmc_get_mmc_dev(dev); +#else static int mci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) { struct atmel_mci_priv *priv = mmc->priv; +#endif atmel_mci_t *mci = priv->mci; u32 cmdr; u32 error_flags = 0; @@ -335,17 +359,29 @@ mci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) return 0; } +#ifdef CONFIG_DM_MMC +static int atmel_mci_set_ios(struct udevice *dev) +{ + struct atmel_mci_priv *priv = dev_get_priv(dev); + struct mmc *mmc = mmc_get_mmc_dev(dev); +#else /* Entered into mmc structure during driver init */ static void mci_set_ios(struct mmc *mmc) { struct atmel_mci_priv *priv = mmc->priv; +#endif + atmel_mci_t *mci = priv->mci; int bus_width = mmc->bus_width; unsigned int version = atmel_mci_get_version(mci); int busw; /* Set the clock speed */ +#ifdef CONFIG_DM_MMC + mci_set_mode(priv, mmc->clock, MMC_DEFAULT_BLKLEN); +#else mci_set_mode(mmc, mmc->clock, MMC_DEFAULT_BLKLEN); +#endif /* * set the bus width and select slot for this interface @@ -370,12 +406,20 @@ static void mci_set_ios(struct mmc *mmc) writel(busw << 7 | MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr); } + + return 0; } + +#ifdef CONFIG_DM_MMC +static int atmel_mci_hw_init(struct atmel_mci_priv *priv) +{ +#else /* Entered into mmc structure during driver init */ static int mci_init(struct mmc *mmc) { struct atmel_mci_priv *priv = mmc->priv; +#endif atmel_mci_t *mci = priv->mci; /* Initialize controller */ @@ -390,11 +434,16 @@ static int mci_init(struct mmc *mmc) writel(~0UL, &mci->idr); /* Set default clocks and blocklen */ +#ifdef CONFIG_DM_MMC + mci_set_mode(priv, CONFIG_SYS_MMC_CLK_OD, MMC_DEFAULT_BLKLEN); +#else mci_set_mode(mmc, CONFIG_SYS_MMC_CLK_OD, MMC_DEFAULT_BLKLEN); +#endif return 0; } +#ifndef CONFIG_DM_MMC static const struct mmc_ops atmel_mci_ops = { .send_cmd = mci_send_cmd, .set_ios = mci_set_ios, @@ -454,3 +503,114 @@ int atmel_mci_init(void *regs) return 0; } +#endif + +#ifdef CONFIG_DM_MMC +static const struct dm_mmc_ops atmel_mci_mmc_ops = { + .send_cmd = atmel_mci_send_cmd, + .set_ios = atmel_mci_set_ios, +}; + +static void atmel_mci_setup_cfg(struct atmel_mci_priv *priv) +{ + struct mmc_config *cfg; + u32 version; + + cfg = &priv->cfg; + cfg->name = "Atmel mci"; + cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; + + /* + * If the version is above 3.0, the capabilities of the 8-bit + * bus width and high speed are supported. + */ + version = atmel_mci_get_version(priv->mci); + if ((version & 0xf00) >= 0x300) { + cfg->host_caps = MMC_MODE_8BIT | + MMC_MODE_HS | MMC_MODE_HS_52MHz; + } + + cfg->host_caps |= MMC_MODE_4BIT; + cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; + cfg->f_min = priv->bus_clk_rate / (2 * 256); + cfg->f_max = priv->bus_clk_rate / 2; +} + +static int atmel_mci_enable_clk(struct udevice *dev) +{ + struct atmel_mci_priv *priv = dev_get_priv(dev); + struct clk clk; + ulong clk_rate; + int ret = 0; + + ret = clk_get_by_index(dev, 0, &clk); + if (ret) { + ret = -EINVAL; + goto failed; + } + + ret = clk_enable(&clk); + if (ret) + goto failed; + + clk_rate = clk_get_rate(&clk); + if (!clk_rate) { + ret = -EINVAL; + goto failed; + } + + priv->bus_clk_rate = clk_rate; + +failed: + clk_free(&clk); + + return ret; +} + +static int atmel_mci_probe(struct udevice *dev) +{ + struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); + struct atmel_mci_priv *priv = dev_get_priv(dev); + struct mmc *mmc; + int ret; + + ret = atmel_mci_enable_clk(dev); + if (ret) + return ret; + + priv->mci = (struct atmel_mci *)dev_get_addr_ptr(dev); + + atmel_mci_setup_cfg(priv); + + mmc = &priv->mmc; + mmc->cfg = &priv->cfg; + mmc->dev = dev; + upriv->mmc = mmc; + + atmel_mci_hw_init(priv); + + return 0; +} + +static int atmel_mci_bind(struct udevice *dev) +{ + struct atmel_mci_priv *priv = dev_get_priv(dev); + + return mmc_bind(dev, &priv->mmc, &priv->cfg); +} + +static const struct udevice_id atmel_mci_ids[] = { + { .compatible = "atmel,hsmci" }, + { } +}; + +U_BOOT_DRIVER(atmel_mci) = { + .name = "atmel-mci", + .id = UCLASS_MMC, + .of_match = atmel_mci_ids, + .bind = atmel_mci_bind, + .probe = atmel_mci_probe, + .priv_auto_alloc_size = sizeof(struct atmel_mci_priv), + .ops = &atmel_mci_mmc_ops, +}; +#endif -- 2.11.0

1 0

[U-Boot] [PATCH 1/2] board: ge: bx50v3: fix AR8033 reset timing issue
by ken <Ken Lin> 03 Feb '17

03 Feb '17

Add the delay (10ms) to ensure the clock is stable and to meet the clock-to-reset(1ms) requirement recommended in the AR8033 datasheet --- board/ge/bx50v3/bx50v3.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c index 2fc1144..80b4ba1 100644 --- a/board/ge/bx50v3/bx50v3.c +++ b/board/ge/bx50v3/bx50v3.c @@ -103,8 +103,9 @@ static void setup_iomux_enet(void) /* Reset AR8033 PHY */ gpio_direction_output(IMX_GPIO_NR(1, 28), 0); - udelay(500); + mdelay(10); gpio_set_value(IMX_GPIO_NR(1, 28), 1); + mdelay(1); } static iomux_v3_cfg_t const usdhc2_pads[] = { -- 2.10.2

2 1

[U-Boot] [RFC] drivers: net: phy: atheros: apply the previous register setting for AR8031 to fix the voltage peak issue
by ken <Ken Lin> 03 Feb '17

03 Feb '17

Apply the previous setting for the reserved bits in SetDes Test and System Mode Control register to avoid the voltage peak issue while we do the IEEE PHY comformance test --- drivers/net/phy/atheros.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c index b34cdd3d87..82fe228604 100644 --- a/drivers/net/phy/atheros.c +++ b/drivers/net/phy/atheros.c @@ -28,6 +28,8 @@ static int ar8021_config(struct phy_device *phydev) static int ar8031_config(struct phy_device *phydev) { + int regval; + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID || phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) { phy_write(phydev, MDIO_DEVAD_NONE, AR803x_PHY_DEBUG_ADDR_REG, @@ -44,6 +46,10 @@ static int ar8031_config(struct phy_device *phydev) AR803x_RGMII_RX_CLK_DLY); } + phy_write(phydev, MDIO_DEVAD_NONE, AR803x_PHY_DEBUG_ADDR_REG, AR803x_DEBUG_REG_5); + regval = phy_read(phydev, MDIO_DEVAD_NONE, AR803x_PHY_DEBUG_DATA_REG); + phy_write(phydev, MDIO_DEVAD_NONE, AR803x_PHY_DEBUG_DATA_REG, regval | 0x3C47); + phydev->supported = phydev->drv->features; genphy_config_aneg(phydev); -- 2.11.0

4 5