December 2017 - U-Boot

[U-Boot] [PATCH] Convert CONFIG_TWL4030_USB et al to Kconfig
by Adam Ford 29 Dec '17

29 Dec '17

This converts the following to Kconfig: CONFIG_TWL4030_USB CONFIG_OMAP_USB_PHY CONFIG_ROCKCHIP_USB2_PHY Signed-off-by: Adam Ford <aford173(a)gmail.com> --- configs/am43xx_evm_defconfig | 1 + configs/am43xx_evm_ethboot_defconfig | 1 + configs/am43xx_evm_qspiboot_defconfig | 1 + configs/am43xx_evm_usbhost_boot_defconfig | 1 + configs/am43xx_hs_evm_defconfig | 1 + configs/am57xx_evm_defconfig | 1 + configs/am57xx_hs_evm_defconfig | 1 + configs/cl-som-am57x_defconfig | 1 + configs/cm_t35_defconfig | 1 + configs/cm_t43_defconfig | 1 + configs/dra7xx_evm_defconfig | 1 + configs/dra7xx_hs_evm_defconfig | 1 + configs/igep0032_defconfig | 1 + configs/igep00x0_defconfig | 1 + configs/nokia_rx51_defconfig | 1 + configs/omap3_beagle_defconfig | 1 + configs/omap3_logic_defconfig | 1 + configs/omap3_zoom1_defconfig | 1 + configs/sniper_defconfig | 1 + drivers/usb/Kconfig | 2 ++ drivers/usb/phy/Kconfig | 17 +++++++++++++++++ include/configs/am43xx_evm.h | 1 - include/configs/am57xx_evm.h | 1 - include/configs/cl-som-am57x.h | 1 - include/configs/cm_t35.h | 1 - include/configs/cm_t43.h | 1 - include/configs/dra7xx_evm.h | 1 - include/configs/nokia_rx51.h | 1 - include/configs/omap3_beagle.h | 1 - include/configs/omap3_igep00x0.h | 1 - include/configs/omap3_logic.h | 1 - include/configs/omap3_zoom1.h | 1 - include/configs/rk3188_common.h | 1 - include/configs/rk3288_common.h | 1 - include/configs/sniper.h | 2 -- scripts/config_whitelist.txt | 3 --- 36 files changed, 38 insertions(+), 18 deletions(-) diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig index c180214..c75eab3 100644 --- a/configs/am43xx_evm_defconfig +++ b/configs/am43xx_evm_defconfig @@ -49,6 +49,7 @@ CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GADGET=y CONFIG_USB_DWC3_OMAP=y CONFIG_USB_DWC3_PHY_OMAP=y +CONFIG_OMAP_USB_PHY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/am43xx_evm_ethboot_defconfig b/configs/am43xx_evm_ethboot_defconfig index 60f0552..7f2acd9 100644 --- a/configs/am43xx_evm_ethboot_defconfig +++ b/configs/am43xx_evm_ethboot_defconfig @@ -60,6 +60,7 @@ CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GADGET=y CONFIG_USB_DWC3_OMAP=y CONFIG_USB_DWC3_PHY_OMAP=y +CONFIG_OMAP_USB_PHY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/am43xx_evm_qspiboot_defconfig b/configs/am43xx_evm_qspiboot_defconfig index d6a5263..a56abc9 100644 --- a/configs/am43xx_evm_qspiboot_defconfig +++ b/configs/am43xx_evm_qspiboot_defconfig @@ -49,6 +49,7 @@ CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GADGET=y CONFIG_USB_DWC3_OMAP=y CONFIG_USB_DWC3_PHY_OMAP=y +CONFIG_OMAP_USB_PHY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/am43xx_evm_usbhost_boot_defconfig b/configs/am43xx_evm_usbhost_boot_defconfig index 28cf04a..e9c3a05 100644 --- a/configs/am43xx_evm_usbhost_boot_defconfig +++ b/configs/am43xx_evm_usbhost_boot_defconfig @@ -72,6 +72,7 @@ CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GADGET=y CONFIG_USB_DWC3_OMAP=y CONFIG_USB_DWC3_PHY_OMAP=y +CONFIG_OMAP_USB_PHY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig index bed0583..e8a641e 100644 --- a/configs/am43xx_hs_evm_defconfig +++ b/configs/am43xx_hs_evm_defconfig @@ -60,6 +60,7 @@ CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GADGET=y CONFIG_USB_DWC3_OMAP=y CONFIG_USB_DWC3_PHY_OMAP=y +CONFIG_OMAP_USB_PHY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig index fc96401..470a7ad 100644 --- a/configs/am57xx_evm_defconfig +++ b/configs/am57xx_evm_defconfig @@ -67,6 +67,7 @@ CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GADGET=y CONFIG_USB_DWC3_OMAP=y CONFIG_USB_DWC3_PHY_OMAP=y +CONFIG_OMAP_USB_PHY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig index 681e2a5..0800d5f 100644 --- a/configs/am57xx_hs_evm_defconfig +++ b/configs/am57xx_hs_evm_defconfig @@ -70,6 +70,7 @@ CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GADGET=y CONFIG_USB_DWC3_OMAP=y CONFIG_USB_DWC3_PHY_OMAP=y +CONFIG_OMAP_USB_PHY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/cl-som-am57x_defconfig b/configs/cl-som-am57x_defconfig index 9c3031b..e9b6fe0 100644 --- a/configs/cl-som-am57x_defconfig +++ b/configs/cl-som-am57x_defconfig @@ -57,6 +57,7 @@ CONFIG_TI_QSPI=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y +CONFIG_OMAP_USB_PHY=y CONFIG_USB_STORAGE=y CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y diff --git a/configs/cm_t35_defconfig b/configs/cm_t35_defconfig index cfb68b1..0cb6e72 100644 --- a/configs/cm_t35_defconfig +++ b/configs/cm_t35_defconfig @@ -52,6 +52,7 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_UDC=y CONFIG_USB_OMAP3=y +CONFIG_TWL4030_USB=y CONFIG_USB_STORAGE=y CONFIG_LCD=y CONFIG_OF_LIBFDT=y diff --git a/configs/cm_t43_defconfig b/configs/cm_t43_defconfig index a621ff2..e234bc6 100644 --- a/configs/cm_t43_defconfig +++ b/configs/cm_t43_defconfig @@ -72,6 +72,7 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y +CONFIG_OMAP_USB_PHY=y CONFIG_USB_STORAGE=y CONFIG_FAT_WRITE=y CONFIG_OF_LIBFDT=y diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig index 716a57b..b13a27e 100644 --- a/configs/dra7xx_evm_defconfig +++ b/configs/dra7xx_evm_defconfig @@ -80,6 +80,7 @@ CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GADGET=y CONFIG_USB_DWC3_OMAP=y CONFIG_USB_DWC3_PHY_OMAP=y +CONFIG_OMAP_USB_PHY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig index f7418c7..7ccb4f0 100644 --- a/configs/dra7xx_hs_evm_defconfig +++ b/configs/dra7xx_hs_evm_defconfig @@ -82,6 +82,7 @@ CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GADGET=y CONFIG_USB_DWC3_OMAP=y CONFIG_USB_DWC3_PHY_OMAP=y +CONFIG_OMAP_USB_PHY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/igep0032_defconfig b/configs/igep0032_defconfig index 60cce77..b0daee1 100644 --- a/configs/igep0032_defconfig +++ b/configs/igep0032_defconfig @@ -42,6 +42,7 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_UDC=y CONFIG_USB_OMAP3=y +CONFIG_TWL4030_USB=y CONFIG_FAT_WRITE=y CONFIG_BCH=y CONFIG_OF_LIBFDT=y diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig index d8ece6b..22dbc70 100644 --- a/configs/igep00x0_defconfig +++ b/configs/igep00x0_defconfig @@ -43,6 +43,7 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_UDC=y CONFIG_USB_OMAP3=y +CONFIG_TWL4030_USB=y CONFIG_FAT_WRITE=y CONFIG_BCH=y CONFIG_OF_LIBFDT=y diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig index 570bb3f..e93042e 100644 --- a/configs/nokia_rx51_defconfig +++ b/configs/nokia_rx51_defconfig @@ -30,6 +30,7 @@ CONFIG_USB=y CONFIG_USB_MUSB_HCD=y CONFIG_USB_MUSB_UDC=y CONFIG_USB_OMAP3=y +CONFIG_TWL4030_USB=y CONFIG_VIDEO=y CONFIG_CFB_CONSOLE_ANSI=y # CONFIG_VGA_AS_SINGLE_DEVICE is not set diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig index 1fea12a..40b99c4 100644 --- a/configs/omap3_beagle_defconfig +++ b/configs/omap3_beagle_defconfig @@ -49,6 +49,7 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_USB_MUSB_OMAP2PLUS=y +CONFIG_TWL4030_USB=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="TI" diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig index a34401f..d282efa 100644 --- a/configs/omap3_logic_defconfig +++ b/configs/omap3_logic_defconfig @@ -51,6 +51,7 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_OMAP3=y CONFIG_USB_MUSB_GADGET=y CONFIG_USB_MUSB_OMAP2PLUS=y +CONFIG_TWL4030_USB=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="TI" diff --git a/configs/omap3_zoom1_defconfig b/configs/omap3_zoom1_defconfig index db867b1..1a915c5 100644 --- a/configs/omap3_zoom1_defconfig +++ b/configs/omap3_zoom1_defconfig @@ -44,5 +44,6 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_UDC=y CONFIG_USB_OMAP3=y +CONFIG_TWL4030_USB=y CONFIG_FAT_WRITE=y CONFIG_OF_LIBFDT=y diff --git a/configs/sniper_defconfig b/configs/sniper_defconfig index c75b1ba..a3bae56 100644 --- a/configs/sniper_defconfig +++ b/configs/sniper_defconfig @@ -40,6 +40,7 @@ CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_MUSB_GADGET=y CONFIG_USB_MUSB_OMAP2PLUS=y +CONFIG_TWL4030_USB=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" CONFIG_USB_GADGET_VENDOR_NUM=0x0451 diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 13e9e49..7de4105 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -57,6 +57,8 @@ source "drivers/usb/musb-new/Kconfig" source "drivers/usb/emul/Kconfig" +source "drivers/usb/phy/Kconfig" + source "drivers/usb/ulpi/Kconfig" comment "USB peripherals" diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig new file mode 100644 index 0000000..bcc67a0 --- /dev/null +++ b/drivers/usb/phy/Kconfig @@ -0,0 +1,17 @@ +# +# (C) Copyright 2017 +# Adam Ford, Logic PD, aford173(a)gmail.com +# +# SPDX-License-Identifier: GPL-2.0+ +# + +comment "USB Phy" + +config TWL4030_USB + bool "TWL4030 PHY" + +config OMAP_USB_PHY + bool "OMAP PHY" + +config ROCKCHIP_USB2_PHY + bool "Rockchip USB2 PHY" diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 302181b..77f8e76 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -77,7 +77,6 @@ #define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 #define CONFIG_USB_XHCI_OMAP -#define CONFIG_OMAP_USB_PHY #define CONFIG_AM437X_USB2PHY2_HOST #endif diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index 28618a5..7546b3f 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -92,7 +92,6 @@ /* USB xHCI HOST */ #define CONFIG_USB_XHCI_OMAP -#define CONFIG_OMAP_USB_PHY #define CONFIG_OMAP_USB3PHY1_HOST /* SATA */ diff --git a/include/configs/cl-som-am57x.h b/include/configs/cl-som-am57x.h index 6935b06..4f64672 100644 --- a/include/configs/cl-som-am57x.h +++ b/include/configs/cl-som-am57x.h @@ -77,7 +77,6 @@ /* USB xHCI HOST */ #define CONFIG_USB_XHCI_OMAP -#define CONFIG_OMAP_USB_PHY #define CONFIG_OMAP_USB3PHY1_HOST /* USB Networking options */ diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 8abe870..cec99ea 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -72,7 +72,6 @@ 115200} /* USB */ -#define CONFIG_TWL4030_USB /* USB device configuration */ #define CONFIG_USB_DEVICE diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index a222491..a564b86 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -55,7 +55,6 @@ /* USB support */ #define CONFIG_USB_XHCI_OMAP -#define CONFIG_OMAP_USB_PHY #define CONFIG_AM437X_USB2PHY2_HOST /* SPI Flash support */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index f777d57..ff90b6d 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -144,7 +144,6 @@ /* USB xHCI HOST */ #define CONFIG_USB_XHCI_OMAP -#define CONFIG_OMAP_USB_PHY #define CONFIG_OMAP_USB2PHY2_HOST /* SATA */ diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index 1c02a8c..c52c6ff 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -83,7 +83,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 } /* USB */ -#define CONFIG_TWL4030_USB /* USB device configuration */ #define CONFIG_USB_DEVICE diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index f21a843..2fc81db 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -43,7 +43,6 @@ #define CONFIG_SYS_I2C_NOPROBES {{0x0, 0x0}} /* USB */ -#define CONFIG_TWL4030_USB 1 /* USB EHCI */ diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 9b815e0..4888176 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -42,7 +42,6 @@ #define GPIO_IGEP00X0_REVISION_DETECTION 129 /* USB */ -#define CONFIG_TWL4030_USB 1 /* USB device configuration */ #define CONFIG_USB_DEVICE 1 diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index a4b29f1..5445186 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -55,7 +55,6 @@ /* USB */ /* TWL4030 */ -#define CONFIG_TWL4030_USB /* Board NAND Info. */ #ifdef CONFIG_NAND diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index e5e4bc4..653790e 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -35,7 +35,6 @@ */ /* USB */ -#define CONFIG_TWL4030_USB 1 /* USB device configuration */ #define CONFIG_USB_DEVICE 1 diff --git a/include/configs/rk3188_common.h b/include/configs/rk3188_common.h index 0cb0762..9ab5502 100644 --- a/include/configs/rk3188_common.h +++ b/include/configs/rk3188_common.h @@ -58,7 +58,6 @@ #ifndef CONFIG_SPL_BUILD /* usb otg */ -#define CONFIG_ROCKCHIP_USB2_PHY /* usb host support */ #define ENV_MEM_LAYOUT_SETTINGS \ diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index e2f070f..c2bd378 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -58,7 +58,6 @@ #ifndef CONFIG_SPL_BUILD /* usb otg */ -#define CONFIG_ROCKCHIP_USB2_PHY /* usb mass storage */ #define CONFIG_USB_FUNCTION_MASS_STORAGE diff --git a/include/configs/sniper.h b/include/configs/sniper.h index 09b5a73..99bee4c 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -113,8 +113,6 @@ * USB gadget */ -#define CONFIG_TWL4030_USB - /* * Environment */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index fdf9e55..d12d0eb 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -1561,7 +1561,6 @@ CONFIG_OMAP_EHCI_PHY2_RESET_GPIO CONFIG_OMAP_EHCI_PHY3_RESET_GPIO CONFIG_OMAP_USB2PHY2_HOST CONFIG_OMAP_USB3PHY1_HOST -CONFIG_OMAP_USB_PHY CONFIG_ORIGEN CONFIG_OS1_ENV_ADDR CONFIG_OS2_ENV_ADDR @@ -1830,7 +1829,6 @@ CONFIG_RMSTP9_ENA CONFIG_ROCKCHIP_CHIP_TAG CONFIG_ROCKCHIP_MAX_INIT_SIZE CONFIG_ROCKCHIP_SDHCI_MAX_FREQ -CONFIG_ROCKCHIP_USB2_PHY CONFIG_ROM_STUBS CONFIG_ROOTFS_OFFSET CONFIG_ROOTPATH @@ -4814,7 +4812,6 @@ CONFIG_TUXX1 CONFIG_TWL4030_INPUT CONFIG_TWL4030_KEYPAD CONFIG_TWL4030_LED -CONFIG_TWL4030_USB CONFIG_TWL6030_INPUT CONFIG_TWL6030_POWER CONFIG_TWR -- 2.7.4

3 2

[U-Boot] [PATCH 00/16] Updates / improvements to bx50v3 support
by Martyn Welch 29 Dec '17

29 Dec '17

This series improves the support on the bx50v3 devices (b540v3, b650v3 and b850v3) and utilising features recently added as part of the PPD implementation. NOTE: This series requires the PPD series: https://lists.denx.de/pipermail/u-boot/2017-November/310865.html Changes outside of the bx50v3/ppd specifc areas: - Added driver for RX8010SJ RTC. - Added functionality to e1000 driver to enable wrting of EEPROM/MAC address. Hannu Lounento (5): net: e1000: add support for writing to EEPROM net: e1000: split e1000_read_mac_addr net: e1000: implement eth_write_hwaddr board: ge: bx50v3: program MAC address to I210 board: ge: bx50v3: mount rootfs read-only Ian Ray (5): configs: Add network device support for bx50v3 products board: ge: bx50v3: Support FIT and select configuration based on VPD config: ge_bx50v3: read boot script configs: ge_bx50v3: enable bootcount configs: ge_bx50v3: automatic partition selection and video output failure message Martyn Welch (4): board: ge: mx53ppd: Move check_time() to common location board: ge: Enable access to i2c bus 1 and 2 board: ge: bx50v3: move FEC MAC address programming to driver board: ge: bx50v3: Enable hardware watchdog Nandor Han (2): rtc: adding RX8010SJ rtc driver board,ge,bx50v3 - rtc time validation board/ge/bx50v3/bx50v3.c | 130 ++++++++++----- board/ge/common/Makefile | 2 +- board/ge/common/ge_common.c | 55 +++++++ board/ge/common/ge_common.h | 7 + board/ge/mx53ppd/mx53ppd.c | 47 +----- configs/ge_b450v3_defconfig | 7 +- configs/ge_b650v3_defconfig | 7 +- configs/ge_b850v3_defconfig | 8 +- drivers/net/e1000.c | 292 +++++++++++++++++++++++++++++++--- drivers/net/e1000.h | 3 + drivers/rtc/Kconfig | 6 + drivers/rtc/Makefile | 1 + drivers/rtc/rx8010sj.c | 378 ++++++++++++++++++++++++++++++++++++++++++++ include/configs/ge_bx50v3.h | 190 +++++++++------------- 14 files changed, 911 insertions(+), 222 deletions(-) create mode 100644 board/ge/common/ge_common.c create mode 100644 board/ge/common/ge_common.h create mode 100644 drivers/rtc/rx8010sj.c -- 2.1.4

3 20

[U-Boot] Dragonboard410c and Dragonboard820c patchset
by Jorge Ramirez-Ortiz 29 Dec '17

29 Dec '17

The following version fixes some nasty compiler warnings present in the previous version. Sorry about it.

4 14

[U-Boot] [PATCH v2] armv8: LS1088: Increase size of CONFIG_SYS_MONITOR_LEN
by Ashish Kumar 29 Dec '17

29 Dec '17

Total size of relocated u-boot is greater than current value of 512KB, increase this to 1MB. Signed-off-by: Ashish Kumar <Ashish.Kumar(a)nxp.com> --- v2: Correct commit msg 512KB include/configs/ls1088a_common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index c96d48d..7ac05ee 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -245,7 +245,7 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 #define CONFIG_SYS_SPL_MALLOC_START 0x80200000 -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MONITOR_LEN (1024 * 1024) #endif #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ -- 2.7.4

1 0

Re: [U-Boot] [EXT] Re: Would you please give some advice on our MDIO driver implementaion?
by Ken Ma 29 Dec '17

29 Dec '17

Hi Simon & Joe I've cc the mail, thanks! BTW, I've implemented Marvell MDIO in plain MDIO APIs as other vendors. Thanks a lot for your kind help! Yours, Ken -----Original Message----- From: sjg(a)google.com [mailto:sjg@google.com] On Behalf Of Simon Glass Sent: 2017年12月22日 1:19 To: Ken Ma Cc: joe.hershberger(a)gmail.com; Wilson Ding; Nadav Haklai; Hua Jing; Victor Gu; Igal Liberman; Stefan Chulski; Stefan Roese Subject: [EXT] Re: Would you please give some advice on our MDIO driver implementaion? External Email ---------------------------------------------------------------------- Hi, Please can you cc the mailing list for U-Boot things? Regards, Simon On 20 December 2017 at 23:55, Ken Ma <make(a)marvell.com> wrote: > Dear Joe and Simon > > Excuse me. > > U-boot v2018 doesn’t have the MDIO support for Armada SoCs(MDIO function is implemented in net driver - MVPP2 and NETA). > > We need an unified Marvell MDIO driver for both SMI and XSMI and for > both MVPP2 and NETA, the driver can handle complicated mux of PHY and MDIO bus across different CP module (for example, in a8k MC boards CP1 ETH0 are connected PHY8 of CP0 XMDIO, CP1 and CP0 are in different address ranges). > > Now there is no MDIO U-CLASS driver and no MDIO U-CLASS id in u-boot 2018, other vendors implement their MDIO drivers in plain APIs. > > My question is whether we should implement MDIO driver in U-CLASS DM model(in this case, mdio-uclass driver needs to be added). > > Or is it OK to just provide plain MDIO APIs as other vendors in our Marvell MDIO driver? > > Would you please give some advice on our MDIO driver implementation? > > > Thanks a lot for your kind help! > > Yours, > Ken > > -----Original Message----- > From: Stefan Roese [mailto:sr@denx.de] > Sent: 2017年12月21日 14:03 > To: Ken Ma > Cc: Wilson Ding; Nadav Haklai; Hua Jing; Victor Gu; Igal Liberman; > Stefan Chulski > Subject: Re: Would you please give some advice on our MDIO driver implementaion? > > Hi Ken, > > On 19.12.2017 10:42, Ken Ma wrote: >> Hi Stefan >> >> Excuse me. >> >> U-boot v2018 doesn’t have the MDIO support for Armada SoCs(MDIO >> function is implemented in net driver - MVPP2 and NETA), >> >> we need an unified Marvell MDIO driver for both SMI and XSMI, the >> driver can handle complicated mux of PHY and MDIO bus across >> different CP modules >> >> (for example, in a8k MC boards CP1 ETH0 are connected PHY8 of CP0 XMDIO). >> >> Now there is no MDIO U-CLASS driver and no MDIO U-CLASS id in u-boot >> 2017, other vendors implement their MDIO driver in plain APIs. >> >> Our question is whether we should implement MDIO driver in U-CLASS DM >> model(in this case, mdio-uclass driver needs to be added). >> >> Or is it OK to just provide plain MDIO APIs as other vendors in our >> Marvell MDIO driver? >> >> Would you please give some advice on our MDIO driver implementation? > > Implementing a MDIO UCLASS driver would be preferred - at least this is my first feeling about this. But frankly, I can't decide this. You can either implement your MDIO / PHY interface in the "normal, plain" APIs and send it to the list for review and upstream acceptance. But you are correct, that you might receive comments about using DM with a new MDIO UCLASS for this. So perhaps its best if you send a mail to the list to ask about this before implementing it without DM support. > Please add Joe Hershberger <joe.hershberger(a)gmail.com> (net custodian) and Simon Glass <sjg(a)chromium.org> (DM custodian) to Cc, if you decide to check on the list. > > Thanks, > Stefan > > -- > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr(a)denx.de

2 1

Re: [U-Boot] How to restore NVRAM on MTD partition from backup
by A.W.C. 28 Dec '17

28 Dec '17

Missed that mail :( it's old board, I have no source code for that customized version of bootloader. I have commands loadb - load binary file over serial line (kermit mode) loads - load S-Record file over serial line loady - load binary file over serial line (ymodem mode) NAND device: Manufacturer ID: 0xad, Chip ID: 0x75 (Hynix NAND 32MiB 3,3V 8-bit) The NVRAM is MTD partition on "gen_nand": 0x01f00000-0x01f80000 : "NVRAM" dev: size erasesize name mtd9: 00080000 00004000 "NVRAM" The cp command is available in bootloader # help cp cp [.b, .w, .l] source target count - copy memory Regards, Alex -------------------------------------------- On Fri, 12/22/17, Lukasz Majewski <lukma(a)denx.de> wrote: Subject: Re: [U-Boot] How to restore NVRAM on MTD partition from backup To: "A.W.C." <bluestream(a)ymail.com> Cc: u-boot(a)lists.denx.de Date: Friday, December 22, 2017, 11:58 PM On Wed, 20 Dec 2017 13:19:58 +0000 (UTC) "A.W.C." <bluestream(a)ymail.com> wrote: > Hi, > > U-Boot 2009.03 on custom board. Nice :-) I assume that it is not possible to move to newer one? >How to restore NVRAM on MTD partition > from backup use U-boot memory commands, by uploading backup over > serial line? (kermit mode or ymodem mode) NAND flash type. It depends on what commands do you have? Yes, it would be best to use load command to get the data via serial line, store it in RAM and then flash it on persistent memory. How do you access NVRAM? (Is it really this memory - not some Parallel NAND, SPI-NOR, OneNAND)? If it has a custom driver ,then you may want to look for 'cp' or other command. > > Regards, > Alex > > > _______________________________________________ > U-Boot mailing list > U-Boot(a)lists.denx.de > https://lists.denx.de/listinfo/u-boot Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de

2 1

[U-Boot] [PATCH 00/23] Fix and extend i.MX HAB layer
by Bryan O'Donoghue 28 Dec '17

28 Dec '17

This patchset updates the i.MX HAB layer in u-boot to fix a list of identified issues and then to add and extend existing functionality. The first block of patches 0001-0006 deal with fixing existing code, - Fixes indentation - Fixes the treatment of input parameters to hab_auth_image. The second block of patches 0007-0013 are about tidying up the HAB code - Remove reliance on hard-coding to specific offsets - IVT header drives locating CSF - Continue to support existing boards Patches 0014 onwards extend out the HAB functionality. - hab_rvt_check_target is a recommended check in the NXP documents to perform prior to hab_rvt_authenticate_image - hab_rvt_failsafe is a useful function to set the board into BootROM USB recovery mode. Bryan O'Donoghue (23): arm: imx: hab: Make authenticate_image return int arm: imx: hab: Fix authenticate_image result code arm: imx: hab: Optimise flow of authenticate_image on is_enabled fail arm: imx: hab: Optimise flow of authenticate_image on hab_entry fail arm: imx: hab: Fix authenticate_image input parameters arm: imx: hab: Fix authenticate image lockup on MX7 arm: imx: hab: Move IVT_SIZE to hab.h arm: imx: hab: Move CSF_PAD_SIZE to hab.h arm: imx: hab: Add IVT header definitions arm: imx: hab: Add IVT header verification arm: imx: hab: Verify IVT self matches calculated address arm: imx: hab: Print CSF based on IVT descriptor arm: imx: hab: Print additional IVT elements during debug arm: imx: hab: Define rvt_check_target() arm: imx: hab: Implement hab_rvt_check_target arm: imx: hab: Add a hab_rvt_check_target to image auth arm: imx: hab: Make internal functions and data static arm: imx: hab: Prefix authenticate_image with imx_hab arm: imx: hab: Rename is_hab_enabled imx_hab_is_enabled arm: imx: hab: Make imx_hab_is_enabled global arm: imx: hab: Define rvt_failsafe() arm: imx: hab: Implement hab_rvt_failsafe arm: imx: hab: Add hab_failsafe console command arch/arm/include/asm/mach-imx/hab.h | 46 +++- arch/arm/mach-imx/hab.c | 480 ++++++++++++++++++++++-------------- arch/arm/mach-imx/spl.c | 38 ++- 3 files changed, 370 insertions(+), 194 deletions(-) -- 2.7.4

2 27

[U-Boot] [PATCH] Convert CONFIG_USB_MUSB_OMAP2PLUS et al to Kconfig
by Adam Ford 28 Dec '17

28 Dec '17

This converts the following to Kconfig: CONFIG_USB_MUSB_OMAP2PLUS CONFIG_USB_MUSB_PIO_ONLY Signed-off-by: Adam Ford <aford173(a)gmail.com> diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig index 0ef9f42..bb7c31b 100644 --- a/configs/am335x_baltos_defconfig +++ b/configs/am335x_baltos_defconfig @@ -55,6 +55,7 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/am335x_boneblack_defconfig b/configs/am335x_boneblack_defconfig index 55e0ebd..ccb5431 100644 --- a/configs/am335x_boneblack_defconfig +++ b/configs/am335x_boneblack_defconfig @@ -32,6 +32,7 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/am335x_boneblack_vboot_defconfig b/configs/am335x_boneblack_vboot_defconfig index fe5b9e7..dc584d8 100644 --- a/configs/am335x_boneblack_vboot_defconfig +++ b/configs/am335x_boneblack_vboot_defconfig @@ -42,6 +42,7 @@ CONFIG_OMAP_TIMER=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig index 9c97009..9e860ce 100644 --- a/configs/am335x_evm_defconfig +++ b/configs/am335x_evm_defconfig @@ -47,6 +47,7 @@ CONFIG_DM_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y CONFIG_USB_MUSB_TI=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/am335x_evm_nor_defconfig b/configs/am335x_evm_nor_defconfig index 1813003..cfdd259 100644 --- a/configs/am335x_evm_nor_defconfig +++ b/configs/am335x_evm_nor_defconfig @@ -34,6 +34,7 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/am335x_evm_norboot_defconfig b/configs/am335x_evm_norboot_defconfig index b38d7f6..862f238 100644 --- a/configs/am335x_evm_norboot_defconfig +++ b/configs/am335x_evm_norboot_defconfig @@ -30,6 +30,7 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/am335x_evm_spiboot_defconfig b/configs/am335x_evm_spiboot_defconfig index 7a20576..2afdc05 100644 --- a/configs/am335x_evm_spiboot_defconfig +++ b/configs/am335x_evm_spiboot_defconfig @@ -32,6 +32,7 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/am335x_evm_usbspl_defconfig b/configs/am335x_evm_usbspl_defconfig index 1e80017..cfdb00c 100644 --- a/configs/am335x_evm_usbspl_defconfig +++ b/configs/am335x_evm_usbspl_defconfig @@ -38,6 +38,7 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/am335x_hs_evm_defconfig b/configs/am335x_hs_evm_defconfig index 78cf48d..acb8362 100644 --- a/configs/am335x_hs_evm_defconfig +++ b/configs/am335x_hs_evm_defconfig @@ -53,6 +53,7 @@ CONFIG_DM_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y CONFIG_USB_MUSB_TI=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/am335x_hs_evm_uart_defconfig b/configs/am335x_hs_evm_uart_defconfig index 09aab29..98f770d 100644 --- a/configs/am335x_hs_evm_uart_defconfig +++ b/configs/am335x_hs_evm_uart_defconfig @@ -53,6 +53,7 @@ CONFIG_DM_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y CONFIG_USB_MUSB_TI=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DOWNLOAD=y diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig index e6c17c7..ace7ff2 100644 --- a/configs/am3517_evm_defconfig +++ b/configs/am3517_evm_defconfig @@ -40,5 +40,6 @@ CONFIG_SPL_NAND_SIMPLE=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y +CONFIG_USB_MUSB_PIO_ONLY=y # CONFIG_FAT_WRITE is not set CONFIG_BCH=y diff --git a/configs/birdland_bav335a_defconfig b/configs/birdland_bav335a_defconfig index 61518f5..be02764 100644 --- a/configs/birdland_bav335a_defconfig +++ b/configs/birdland_bav335a_defconfig @@ -62,6 +62,7 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/birdland_bav335b_defconfig b/configs/birdland_bav335b_defconfig index c7360c3..311d175 100644 --- a/configs/birdland_bav335b_defconfig +++ b/configs/birdland_bav335b_defconfig @@ -62,6 +62,7 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/brppt1_mmc_defconfig b/configs/brppt1_mmc_defconfig index c41a7b4..a3303b9 100644 --- a/configs/brppt1_mmc_defconfig +++ b/configs/brppt1_mmc_defconfig @@ -55,6 +55,7 @@ CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_LCD=y diff --git a/configs/brppt1_nand_defconfig b/configs/brppt1_nand_defconfig index 3844413..1fcc0e2 100644 --- a/configs/brppt1_nand_defconfig +++ b/configs/brppt1_nand_defconfig @@ -57,6 +57,7 @@ CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_LCD=y diff --git a/configs/brppt1_spi_defconfig b/configs/brppt1_spi_defconfig index 25d8837..7d5d641 100644 --- a/configs/brppt1_spi_defconfig +++ b/configs/brppt1_spi_defconfig @@ -65,6 +65,7 @@ CONFIG_SYS_NS16550=y CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_LCD=y diff --git a/configs/brxre1_defconfig b/configs/brxre1_defconfig index 0c2d7ed..9271e46 100644 --- a/configs/brxre1_defconfig +++ b/configs/brxre1_defconfig @@ -56,6 +56,7 @@ CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_LCD=y diff --git a/configs/chiliboard_defconfig b/configs/chiliboard_defconfig index bc69df0..b0ed5a5 100644 --- a/configs/chiliboard_defconfig +++ b/configs/chiliboard_defconfig @@ -45,6 +45,7 @@ CONFIG_SYS_NS16550=y CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_FAT_WRITE=y CONFIG_LZO=y diff --git a/configs/cm_t3517_defconfig b/configs/cm_t3517_defconfig index 819a95b..b821daa 100644 --- a/configs/cm_t3517_defconfig +++ b/configs/cm_t3517_defconfig @@ -48,6 +48,7 @@ CONFIG_SYS_NS16550=y CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_LCD=y CONFIG_OF_LIBFDT=y diff --git a/configs/draco_defconfig b/configs/draco_defconfig index be0105f..f99cae5 100644 --- a/configs/draco_defconfig +++ b/configs/draco_defconfig @@ -64,6 +64,7 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Siemens AG" diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig index 8e8ef6f..ab55c4e 100644 --- a/configs/etamin_defconfig +++ b/configs/etamin_defconfig @@ -64,6 +64,7 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Siemens AG" diff --git a/configs/kc1_defconfig b/configs/kc1_defconfig index 0ddf64c..b06912a 100644 --- a/configs/kc1_defconfig +++ b/configs/kc1_defconfig @@ -38,6 +38,8 @@ CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_OMAP2PLUS=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" CONFIG_USB_GADGET_VENDOR_NUM=0x0451 diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig index ad72079..b360cc9 100644 --- a/configs/omap3_beagle_defconfig +++ b/configs/omap3_beagle_defconfig @@ -48,6 +48,8 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_OMAP2PLUS=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="TI" diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig index 5103e9f..8ff59c7 100644 --- a/configs/omap3_evm_defconfig +++ b/configs/omap3_evm_defconfig @@ -54,6 +54,8 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_OMAP2PLUS=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" CONFIG_USB_GADGET_VENDOR_NUM=0x0451 diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig index 5590b9a..2908dc5 100644 --- a/configs/omap3_logic_defconfig +++ b/configs/omap3_logic_defconfig @@ -51,6 +51,8 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_OMAP2PLUS=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="TI" diff --git a/configs/pcm051_rev1_defconfig b/configs/pcm051_rev1_defconfig index 273fc30..3a89ce4 100644 --- a/configs/pcm051_rev1_defconfig +++ b/configs/pcm051_rev1_defconfig @@ -58,6 +58,7 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_ETHER=y diff --git a/configs/pcm051_rev3_defconfig b/configs/pcm051_rev3_defconfig index f1ddaa6..cea3145 100644 --- a/configs/pcm051_rev3_defconfig +++ b/configs/pcm051_rev3_defconfig @@ -58,6 +58,7 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_ETHER=y diff --git a/configs/pengwyn_defconfig b/configs/pengwyn_defconfig index 4bb6245..89d236d 100644 --- a/configs/pengwyn_defconfig +++ b/configs/pengwyn_defconfig @@ -62,6 +62,7 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_FAT_WRITE=y diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig index 0ec1591..48b4d2c 100644 --- a/configs/pxm2_defconfig +++ b/configs/pxm2_defconfig @@ -67,6 +67,7 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Siemens AG" diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig index 5ef1740..b57592b 100644 --- a/configs/rastaban_defconfig +++ b/configs/rastaban_defconfig @@ -64,6 +64,7 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Siemens AG" diff --git a/configs/rut_defconfig b/configs/rut_defconfig index 1711fc7..02e9732 100644 --- a/configs/rut_defconfig +++ b/configs/rut_defconfig @@ -68,6 +68,7 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Siemens AG" diff --git a/configs/sniper_defconfig b/configs/sniper_defconfig index a8a592f..f6cbb69 100644 --- a/configs/sniper_defconfig +++ b/configs/sniper_defconfig @@ -39,6 +39,8 @@ CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_OMAP2PLUS=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" CONFIG_USB_GADGET_VENDOR_NUM=0x0451 diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig index 2575c00..011f4b0 100644 --- a/configs/thuban_defconfig +++ b/configs/thuban_defconfig @@ -64,6 +64,7 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Siemens AG" diff --git a/drivers/usb/musb-new/Kconfig b/drivers/usb/musb-new/Kconfig index caba42c..2bdab5c 100644 --- a/drivers/usb/musb-new/Kconfig +++ b/drivers/usb/musb-new/Kconfig @@ -23,6 +23,16 @@ config USB_MUSB_TI speed USB controller based on the Mentor Graphics silicon IP. +config USB_MUSB_OMAP2PLUS + tristate "OMAP2430 and onwards" + depends on ARCH_OMAP2PLUS + +config USB_MUSB_PIO_ONLY + bool 'Disable DMA (always use PIO)' + help + All data is copied between memory and FIFO by the CPU. + DMA controllers are ignored. + if USB_MUSB_HOST || USB_MUSB_GADGET config USB_MUSB_PIC32 diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 856c546..846f5c9 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -229,7 +229,6 @@ * and DFU. */ #define CONFIG_USB_MUSB_DSPS -#define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 33ed85e..d9d2462 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -43,7 +43,6 @@ * Enable CONFIG_USB_MUSB_GADGET for Device functionalities. */ #define CONFIG_USB_MUSB_AM35X -#define CONFIG_USB_MUSB_PIO_ONLY #ifdef CONFIG_USB_MUSB_AM35X diff --git a/include/configs/baltos.h b/include/configs/baltos.h index 3fc9e2f..e438105 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -273,7 +273,6 @@ * and DFU. */ #define CONFIG_USB_MUSB_DSPS -#define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_HOST diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h index 8917bbe..ab0082e 100644 --- a/include/configs/bav335x.h +++ b/include/configs/bav335x.h @@ -395,7 +395,6 @@ DEFAULT_LINUX_BOOT_ENV \ * and DFU. */ #define CONFIG_USB_MUSB_DSPS -#define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h index 2dadcae..0d80c6d 100644 --- a/include/configs/brppt1.h +++ b/include/configs/brppt1.h @@ -211,7 +211,6 @@ MMCARGS /* USB configuration */ #define CONFIG_USB_MUSB_DSPS -#define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_HOST diff --git a/include/configs/brxre1.h b/include/configs/brxre1.h index 8f92d7a..7125c86 100644 --- a/include/configs/brxre1.h +++ b/include/configs/brxre1.h @@ -81,7 +81,6 @@ BUR_COMMON_ENV \ /* USB configuration */ #define CONFIG_USB_MUSB_DSPS -#define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_HOST diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h index 92fd235..835b9dc 100644 --- a/include/configs/chiliboard.h +++ b/include/configs/chiliboard.h @@ -154,7 +154,6 @@ /* USB configuration */ #define CONFIG_USB_MUSB_DSPS #define CONFIG_ARCH_MISC_INIT -#define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_AM335X_USB1 #define CONFIG_AM335X_USB1_MODE MUSB_HOST diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h index a472b9f..1737f88 100644 --- a/include/configs/cm_t3517.h +++ b/include/configs/cm_t3517.h @@ -84,8 +84,6 @@ #define CONFIG_USB_OMAP3 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147 -#else /* !CONFIG_USB_MUSB_AM35X */ -#define CONFIG_USB_MUSB_PIO_ONLY #endif /* CONFIG_USB_MUSB_AM35X */ /* commands to include */ diff --git a/include/configs/kc1.h b/include/configs/kc1.h index 8d8dc26..94c3d0a 100644 --- a/include/configs/kc1.h +++ b/include/configs/kc1.h @@ -115,9 +115,6 @@ * USB gadget */ -#define CONFIG_USB_MUSB_PIO_ONLY -#define CONFIG_USB_MUSB_OMAP2PLUS - /* * Environment */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 394bfb7..f21a843 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -43,8 +43,6 @@ #define CONFIG_SYS_I2C_NOPROBES {{0x0, 0x0}} /* USB */ -#define CONFIG_USB_MUSB_OMAP2PLUS -#define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_TWL4030_USB 1 /* USB EHCI */ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 42f2153..0eefb84 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -77,8 +77,6 @@ /* MUSB */ #define CONFIG_USB_OMAP3 -#define CONFIG_USB_MUSB_OMAP2PLUS -#define CONFIG_USB_MUSB_PIO_ONLY /* USB EHCI */ #define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index b095814..1e4e42a 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -55,8 +55,6 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C64 */ /* USB */ -#define CONFIG_USB_MUSB_OMAP2PLUS -#define CONFIG_USB_MUSB_PIO_ONLY /* TWL4030 */ #define CONFIG_TWL4030_USB diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index 79f3f48..9482501 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -127,7 +127,6 @@ * USB configuration */ #define CONFIG_USB_MUSB_DSPS -#define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL #define CONFIG_AM335X_USB1 diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h index 8afd64e..d1ddb15 100644 --- a/include/configs/pengwyn.h +++ b/include/configs/pengwyn.h @@ -163,7 +163,6 @@ * add mass storage support. */ #define CONFIG_USB_MUSB_DSPS -#define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h index 97636fe..0bb5126 100644 --- a/include/configs/pic32mzdask.h +++ b/include/configs/pic32mzdask.h @@ -80,7 +80,6 @@ /*-------------------------------------------------- * USB Configuration */ -#define CONFIG_USB_MUSB_PIO_ONLY /*----------------------------------------------------------------------- * File System Configuration diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 78708a2..5da5a08 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -169,7 +169,6 @@ * USB configuration */ #define CONFIG_USB_MUSB_DSPS -#define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_AM335X_USB0 diff --git a/include/configs/sniper.h b/include/configs/sniper.h index 5809942..09b5a73 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -113,8 +113,6 @@ * USB gadget */ -#define CONFIG_USB_MUSB_PIO_ONLY -#define CONFIG_USB_MUSB_OMAP2PLUS #define CONFIG_TWL4030_USB /* diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 3855c56..582aba2 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -302,10 +302,6 @@ extern int soft_i2c_gpio_scl; #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 #endif -#ifdef CONFIG_USB_MUSB_SUNXI -#define CONFIG_USB_MUSB_PIO_ONLY -#endif - #ifdef CONFIG_USB_MUSB_GADGET #define CONFIG_USB_FUNCTION_MASS_STORAGE #endif diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 43a4ff0..97d27fc 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -4947,8 +4947,6 @@ CONFIG_USB_MUSB_AM35X CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT CONFIG_USB_MUSB_DSPS CONFIG_USB_MUSB_HCD -CONFIG_USB_MUSB_OMAP2PLUS -CONFIG_USB_MUSB_PIO_ONLY CONFIG_USB_MUSB_TIMEOUT CONFIG_USB_MUSB_TUSB6010 CONFIG_USB_MUSB_UDC -- 2.7.4

2 2

[U-Boot] [PATCH] armv8: LS1088: Increase size of CONFIG_SYS_MONITOR_LEN
by Ashish Kumar 28 Dec '17

28 Dec '17

Total size of relocated u-boot is greater than current value of 512MB, increase this to 1MB. Signed-off-by: Ashish Kumar <Ashish.Kumar(a)nxp.com> --- include/configs/ls1088a_common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index c96d48d..7ac05ee 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -245,7 +245,7 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 #define CONFIG_SYS_SPL_MALLOC_START 0x80200000 -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MONITOR_LEN (1024 * 1024) #endif #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ -- 2.7.4

1 0

[U-Boot] [PATCH] spl: atf: fix the plat_params
by Kever Yang 27 Dec '17

27 Dec '17

The latest upstream ATF still not support using a fdt base as plat_params, I get error like this: "ERROR: not expected type found 6410029648624618960" The reason is the ATF source code parse the plat_param, and can not decode the type in: /* common header for all plat parameter type */ struct bl31_plat_param { uint64_t type; void *next; }; void params_early_setup(void *plat_param_from_bl2) plat/rockchip/common/params_setup.c We can only use the fdt_addr as plat_params after upstream ATF able to parse it. BUGFIX to: 1d37909 spl: atf: introduce spl_invoke_atf and make bl31_entry private Signed-off-by: Kever Yang <kever.yang(a)rock-chips.com> --- common/spl/spl_atf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/common/spl/spl_atf.c b/common/spl/spl_atf.c index 63557c0..a65d603 100644 --- a/common/spl/spl_atf.c +++ b/common/spl/spl_atf.c @@ -96,7 +96,7 @@ static void bl31_entry(uintptr_t bl31_entry, uintptr_t bl33_entry, raw_write_daif(SPSR_EXCEPTION_MASK); dcache_disable(); - atf_entry((void *)bl31_params, (void *)fdt_addr); + atf_entry((void *)bl31_params, NULL); } static int spl_fit_images_find_uboot(void *blob) -- 1.9.1

2 3