December 2017 - U-Boot

[U-Boot] [PATCH 0/3] ARM: omap3: evm: Add OF_CONTROL support
by Derald D. Woods 02 Jan '18

02 Jan '18

This series adds OF_CONTROL support for TMDSEVM{3530,3730} and additionally updates ethaddr setup with smc911x initialization. Devicetree files are taken from Linux v4.15-rc3. Note that this is the first addition of OMAP34XX devicetree files. Tested using GCC 7.2.0 [--with-float=hard --with-mode=thumb] --- 8< ----------------------------------------------------------------- U-Boot SPL 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10) Trying to boot from MMC1 reading u-boot.img reading u-boot.img U-Boot 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10 -0600) OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 MHz Model: TI OMAP35XX EVM (TMDSEVM3530) OMAP3 EVM board + LPDDR/NAND I2C: ready DRAM: 256 MiB NAND: 256 MiB MMC: OMAP SD/MMC: 0 Read back SMSC id 0x92200000 OMAP die ID: 265a002400000000040365fa1801b01f Net: smc911x-0 starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found Hit any key to stop autoboot: 0 OMAP3_EVM # echo $stdin;echo $stdout;echo $stderr serial@4806a000 serial@4806a000 serial@4806a000 --- 8< ----------------------------------------------------------------- Derald D. Woods (3): ARM: dts: omap3-evm: Add support for TMDSEVM{3530,3730} ARM: dts: omap3-evm: Enable DM and devicetree for TMDSEVM{3530,3730} ARM: omap3: evm: Refactor 'board_eth_init' arch/arm/dts/Makefile | 4 + arch/arm/dts/omap-gpmc-smsc911x.dtsi | 55 ++++++ arch/arm/dts/omap3-evm-37xx-u-boot.dtsi | 29 ++++ arch/arm/dts/omap3-evm-37xx.dts | 110 ++++++++++++ arch/arm/dts/omap3-evm-common.dtsi | 195 +++++++++++++++++++++ arch/arm/dts/omap3-evm-processor-common.dtsi | 216 ++++++++++++++++++++++++ arch/arm/dts/omap3-evm-u-boot.dtsi | 29 ++++ arch/arm/dts/omap3-evm.dts | 89 ++++++++++ arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi | 73 ++++++++ arch/arm/dts/omap34xx.dtsi | 84 +++++++++ arch/arm/mach-omap2/omap3/Kconfig | 4 + board/ti/evm/evm.c | 24 +-- configs/omap3_evm_defconfig | 9 +- include/configs/omap3_evm.h | 2 - 14 files changed, 896 insertions(+), 27 deletions(-) create mode 100644 arch/arm/dts/omap-gpmc-smsc911x.dtsi create mode 100644 arch/arm/dts/omap3-evm-37xx-u-boot.dtsi create mode 100644 arch/arm/dts/omap3-evm-37xx.dts create mode 100644 arch/arm/dts/omap3-evm-common.dtsi create mode 100644 arch/arm/dts/omap3-evm-processor-common.dtsi create mode 100644 arch/arm/dts/omap3-evm-u-boot.dtsi create mode 100644 arch/arm/dts/omap3-evm.dts create mode 100644 arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi create mode 100644 arch/arm/dts/omap34xx.dtsi -- 2.15.1

2 14

[U-Boot] [PATCH 1/1] dm: core: remove orphaned parameter description in platdata.h
by Heinrich Schuchardt 02 Jan '18

02 Jan '18

struct driver_info has no field 'flags'. Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- include/dm/platdata.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/dm/platdata.h b/include/dm/platdata.h index 488b2ab0ae..b73aa33093 100644 --- a/include/dm/platdata.h +++ b/include/dm/platdata.h @@ -23,7 +23,6 @@ * @name: Driver name * @platdata: Driver-specific platform data * @platdata_size: Size of platform data structure - * @flags: Platform data flags (DM_FLAG_...) */ struct driver_info { const char *name; -- 2.14.2

3 2

[U-Boot] [PATCH] power: tps65910: replace error() by pr_err()
by Felix Brack 02 Jan '18

02 Jan '18

The patch replaces the former error() by the new pr_err(). This makes the TPS65910 driver conform to Masahiro's patch 'treewide:replace with error() with pr_err()' introduced October 2017. Signed-off-by: Felix Brack <fb(a)ltec.ch> --- drivers/power/pmic/pmic_tps65910_dm.c | 4 ++-- drivers/power/regulator/tps65910_regulator.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/power/pmic/pmic_tps65910_dm.c b/drivers/power/pmic/pmic_tps65910_dm.c index 0127ce3..c65f38f 100644 --- a/drivers/power/pmic/pmic_tps65910_dm.c +++ b/drivers/power/pmic/pmic_tps65910_dm.c @@ -32,7 +32,7 @@ static int pmic_tps65910_write(struct udevice *dev, uint reg, const u8 *buffer, ret = dm_i2c_write(dev, reg, buffer, len); if (ret) - error("%s write error on register %02x\n", dev->name, reg); + pr_err("%s write error on register %02x\n", dev->name, reg); return ret; } @@ -44,7 +44,7 @@ static int pmic_tps65910_read(struct udevice *dev, uint reg, u8 *buffer, ret = dm_i2c_read(dev, reg, buffer, len); if (ret) - error("%s read error on register %02x\n", dev->name, reg); + pr_err("%s read error on register %02x\n", dev->name, reg); return ret; } diff --git a/drivers/power/regulator/tps65910_regulator.c b/drivers/power/regulator/tps65910_regulator.c index 5e2ec8f..ad952e5 100644 --- a/drivers/power/regulator/tps65910_regulator.c +++ b/drivers/power/regulator/tps65910_regulator.c @@ -340,11 +340,11 @@ static int buck_set_vdd1_vdd2_value(struct udevice *dev, int uV) /* check setpoint is within limits */ if (uV < uc_pdata->min_uV) { - error("voltage %duV for %s too low\n", uV, dev->name); + pr_err("voltage %duV for %s too low\n", uV, dev->name); return -EINVAL; } if (uV > uc_pdata->max_uV) { - error("voltage %duV for %s too high\n", uV, dev->name); + pr_err("voltage %duV for %s too high\n", uV, dev->name); return -EINVAL; } -- 2.7.4

3 2

[U-Boot] [PATCH v2] Convert CONFIG_SOC_DA8XX et al to Kconfig
by Adam Ford 30 Dec '17

30 Dec '17

This converts the following to Kconfig: CONFIG_SOC_DA8XX CONFIG_SOC_DA850 CONFIG_MACH_DAVINCI_DA850_EVM Signed-off-by: Adam Ford <aford173(a)gmail.com> --- README | 2 -- arch/arm/mach-davinci/Kconfig | 24 +++++++++++++++++++++--- include/configs/calimain.h | 2 -- include/configs/da850evm.h | 3 --- include/configs/ea20.h | 3 --- include/configs/ipam390.h | 3 --- include/configs/legoev3.h | 3 --- include/configs/omapl138_lcdk.h | 1 - scripts/config_whitelist.txt | 3 --- 9 files changed, 21 insertions(+), 23 deletions(-) diff --git a/README b/README index 06f3ed0..ea7923e 100644 --- a/README +++ b/README @@ -2351,8 +2351,6 @@ The following options need to be configured: CONFIG_AT91SAM9XE enable special bootcounter support on at91sam9xe based boards. - CONFIG_SOC_DA8XX - enable special bootcounter support on da850 based boards. CONFIG_BOOTCOUNT_RAM enable support for the bootcounter in RAM CONFIG_BOOTCOUNT_I2C diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 35e4e9b..7b6f10d 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -6,33 +6,41 @@ choice config TARGET_IPAM390 bool "IPAM390 board" + select MACH_DAVINCI_DA850_EVM + select SOC_DA850 select SUPPORT_SPL - select SYS_DA850_PLL_INIT - select SYS_DA850_DDR_INIT - + config TARGET_DA850EVM bool "DA850 EVM board" + select MACH_DAVINCI_DA850_EVM + select SOC_DA850 select SUPPORT_SPL select SYS_DA850_PLL_INIT select SYS_DA850_DDR_INIT config TARGET_EA20 bool "EA20 board" + select MACH_DAVINCI_DA850_EVM + select SOC_DA850 select BOARD_LATE_INIT config TARGET_OMAPL138_LCDK bool "OMAPL138 LCDK" + select SOC_DA850 select SUPPORT_SPL select SYS_DA850_PLL_INIT select SYS_DA850_DDR_INIT config TARGET_CALIMAIN bool "Calimain board" + select SOC_DA850 select SYS_DA850_PLL_INIT select SYS_DA850_DDR_INIT config TARGET_LEGOEV3 bool "LEGO MINDSTORMS EV3" + select MACH_DAVINCI_DA850_EVM + select SOC_DA850 select SYS_DA850_PLL_INIT select SYS_DA850_DDR_INIT @@ -46,7 +54,17 @@ config SYS_DA850_PLL_INIT config SYS_DA850_DDR_INIT bool + +config SOC_DA850 + bool + select SOC_DA8XX + +config SOC_DA8XX + bool +config MACH_DAVINCI_DA850_EVM + bool + source "board/Barix/ipam390/Kconfig" source "board/davinci/da8xxevm/Kconfig" source "board/davinci/ea20/Kconfig" diff --git a/include/configs/calimain.h b/include/configs/calimain.h index 60068d1..9f4fc88 100644 --- a/include/configs/calimain.h +++ b/include/configs/calimain.h @@ -22,8 +22,6 @@ * SoC Configuration */ #define CONFIG_MACH_DAVINCI_CALIMAIN -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ calimain_get_osc_freq() diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 3ca5965..97effa8 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -33,9 +33,6 @@ /* * SoC Configuration */ -#define CONFIG_MACH_DAVINCI_DA850_EVM -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 diff --git a/include/configs/ea20.h b/include/configs/ea20.h index c5e6e9e..9b5856e 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -24,9 +24,6 @@ /* * SoC Configuration */ -#define CONFIG_MACH_DAVINCI_DA850_EVM -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h index 1683855..618bf72 100644 --- a/include/configs/ipam390.h +++ b/include/configs/ipam390.h @@ -24,9 +24,6 @@ /* * SoC Configuration */ -#define CONFIG_MACH_DAVINCI_DA850_EVM -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h index c27373c..105429b 100644 --- a/include/configs/legoev3.h +++ b/include/configs/legoev3.h @@ -18,9 +18,6 @@ /* * SoC Configuration */ -#define CONFIG_MACH_DAVINCI_DA850_EVM -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 5dba7d2..570322e 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -24,7 +24,6 @@ */ #define CONFIG_MACH_OMAPL138_LCDK #define CONFIG_ARM926EJS /* arm926ejs CPU core */ -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 43a4ff0..11a53166 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -1295,7 +1295,6 @@ CONFIG_MACB3_PHY CONFIG_MACB_SEARCH_PHY CONFIG_MACH_ASPENITE CONFIG_MACH_DAVINCI_CALIMAIN -CONFIG_MACH_DAVINCI_DA850_EVM CONFIG_MACH_DOCKSTAR CONFIG_MACH_EDMINIV2 CONFIG_MACH_GOFLEXHOME @@ -2021,8 +2020,6 @@ CONFIG_SOC_AU1100 CONFIG_SOC_AU1500 CONFIG_SOC_AU1550 CONFIG_SOC_AU1X00 -CONFIG_SOC_DA850 -CONFIG_SOC_DA8XX CONFIG_SOC_DM355 CONFIG_SOC_DM365 CONFIG_SOC_DM644X -- 2.7.4

2 1

[U-Boot] [PATCH] Convert CONFIG_SPI to Kconfig
by Adam Ford 30 Dec '17

30 Dec '17

This converts the following to Kconfig: CONFIG_SPI Signed-off-by: Adam Ford <aford173(a)gmail.com> --- configs/cm_t335_defconfig | 1 + configs/devkit8000_defconfig | 1 + drivers/spi/Kconfig | 8 ++++++-- include/configs/alt.h | 1 - include/configs/blanche.h | 1 - include/configs/brppt1.h | 1 - include/configs/cl-som-imx7.h | 1 - include/configs/cm_fx6.h | 1 - include/configs/cm_t335.h | 1 - include/configs/da850evm.h | 1 - include/configs/devkit8000.h | 1 - include/configs/ea20.h | 1 - include/configs/gose.h | 1 - include/configs/koelsch.h | 1 - include/configs/lager.h | 1 - include/configs/legoev3.h | 1 - include/configs/microblaze-generic.h | 1 - include/configs/omapl138_lcdk.h | 1 - include/configs/ot1200.h | 1 - include/configs/porter.h | 1 - include/configs/rk3036_common.h | 1 - include/configs/rk3128_common.h | 1 - include/configs/rk3188_common.h | 1 - include/configs/rk3288_common.h | 1 - include/configs/rk3328_common.h | 1 - include/configs/rut.h | 2 -- include/configs/siemens-am33x-common.h | 1 - include/configs/silk.h | 1 - include/configs/stout.h | 1 - include/configs/taurus.h | 1 - include/configs/ti_armv7_common.h | 1 - include/configs/x86-common.h | 1 - scripts/config_whitelist.txt | 1 - 33 files changed, 8 insertions(+), 33 deletions(-) diff --git a/configs/cm_t335_defconfig b/configs/cm_t335_defconfig index 608c25a..be2d1f0 100644 --- a/configs/cm_t335_defconfig +++ b/configs/cm_t335_defconfig @@ -56,5 +56,6 @@ CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +# CONFIG_SPI is not set CONFIG_FAT_WRITE=y CONFIG_OF_LIBFDT=y diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig index 2e97a88..3ea7f98 100644 --- a/configs/devkit8000_defconfig +++ b/configs/devkit8000_defconfig @@ -36,4 +36,5 @@ CONFIG_NAND=y CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SYS_NS16550=y +# CONFIG_SPI is not set CONFIG_OF_LIBFDT=y diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 494639f..c33501c 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -1,4 +1,8 @@ -menu "SPI Support" +menuconfig SPI + bool "SPI Support" + default y + +if SPI config DM_SPI bool "Enable Driver Model for SPI drivers" @@ -236,4 +240,4 @@ config OMAP3_SPI (McSPI). This driver be used to access SPI chips on platforms embedding this OMAP3 McSPI IP core. -endmenu # menu "SPI Support" +endif # menu "SPI Support" diff --git a/include/configs/alt.h b/include/configs/alt.h index 35518da..e606a49 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -39,7 +39,6 @@ /* SCIF */ /* FLASH */ -#define CONFIG_SPI #define CONFIG_SH_QSPI #define CONFIG_SPI_FLASH_QUAD diff --git a/include/configs/blanche.h b/include/configs/blanche.h index ce7c716..867cdb3 100755 --- a/include/configs/blanche.h +++ b/include/configs/blanche.h @@ -40,7 +40,6 @@ /* FLASH */ #if !defined(CONFIG_MTD_NOR_FLASH) #define CONFIG_SYS_TEXT_BASE 0x40000000 -#define CONFIG_SPI #define CONFIG_SH_QSPI #define CONFIG_SH_QSPI_BASE 0xE6B10000 #else diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h index 2dadcae..1f73130 100644 --- a/include/configs/brppt1.h +++ b/include/configs/brppt1.h @@ -220,7 +220,6 @@ MMCARGS #if defined(CONFIG_SPI_BOOT) /* McSPI IP block */ -#define CONFIG_SPI #define CONFIG_SF_DEFAULT_SPEED 24000000 #define CONFIG_SPL_SPI_LOAD diff --git a/include/configs/cl-som-imx7.h b/include/configs/cl-som-imx7.h index 14c4712..33add17 100644 --- a/include/configs/cl-som-imx7.h +++ b/include/configs/cl-som-imx7.h @@ -147,7 +147,6 @@ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* SPI Flash support */ -#define CONFIG_SPI #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 #define CONFIG_SF_DEFAULT_CS 0 diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 5195610..e0fbffd 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -161,7 +161,6 @@ #define CONFIG_PREBOOT "usb start;sf probe" /* SPI */ -#define CONFIG_SPI #define CONFIG_MXC_SPI /* NAND */ diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h index d6ebdcd..d78236f 100644 --- a/include/configs/cm_t335.h +++ b/include/configs/cm_t335.h @@ -15,7 +15,6 @@ #include <configs/ti_am335x_common.h> -#undef CONFIG_SPI #undef CONFIG_BOOTCOUNT_LIMIT #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 4364649..1a8d132 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -149,7 +149,6 @@ #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_SPI #define CONFIG_DAVINCI_SPI #define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) #ifdef CONFIG_SPL_BUILD diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 5f47c0f..fc6d656 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -59,7 +59,6 @@ #undef CONFIG_DM9000_DEBUG /* SPI */ -#undef CONFIG_SPI /* I2C */ diff --git a/include/configs/ea20.h b/include/configs/ea20.h index c5e6e9e..35358bf 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -60,7 +60,6 @@ #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_SPI #define CONFIG_DAVINCI_SPI #define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE #define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) diff --git a/include/configs/gose.h b/include/configs/gose.h index 610ba1a..0dbacb6 100644 --- a/include/configs/gose.h +++ b/include/configs/gose.h @@ -40,7 +40,6 @@ /* SCIF */ /* FLASH */ -#define CONFIG_SPI #define CONFIG_SH_QSPI /* SH Ether */ diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index b9214d2..c65a3e7 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -40,7 +40,6 @@ /* SCIF */ /* FLASH */ -#define CONFIG_SPI #define CONFIG_SH_QSPI /* SH Ether */ diff --git a/include/configs/lager.h b/include/configs/lager.h index 291b03c..2e7585d 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -40,7 +40,6 @@ /* SCIF */ /* SPI */ -#define CONFIG_SPI #define CONFIG_SH_QSPI /* SH Ether */ diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h index c27373c..9ddb0d0 100644 --- a/include/configs/legoev3.h +++ b/include/configs/legoev3.h @@ -123,7 +123,6 @@ #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_SPI #define CONFIG_DAVINCI_SPI #define CONFIG_SYS_SPI_BASE DAVINCI_SPI0_BASE #define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI0_CLKID) diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 41e6790..a19c629 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -109,7 +109,6 @@ #ifdef SPIFLASH # define CONFIG_SYS_SPI_BASE XILINX_SPI_FLASH_BASEADDR -# define CONFIG_SPI 1 # define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 # define CONFIG_SF_DEFAULT_SPEED XILINX_SPI_FLASH_MAX_FREQ # define CONFIG_SF_DEFAULT_CS XILINX_SPI_FLASH_CS diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 5dba7d2..c57db72 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -128,7 +128,6 @@ #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_SPI #define CONFIG_DAVINCI_SPI #define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE #define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h index 051416e..c36e7c1 100644 --- a/include/configs/ot1200.h +++ b/include/configs/ot1200.h @@ -20,7 +20,6 @@ #define CONFIG_MXC_UART_BASE UART1_BASE /* SF Configs */ -#define CONFIG_SPI #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 2 #define CONFIG_SF_DEFAULT_CS 0 diff --git a/include/configs/porter.h b/include/configs/porter.h index 451d9dd..c00a40d 100644 --- a/include/configs/porter.h +++ b/include/configs/porter.h @@ -40,7 +40,6 @@ /* SCIF */ /* FLASH */ -#define CONFIG_SPI #define CONFIG_SH_QSPI #define CONFIG_SPI_FLASH_QUAD diff --git a/include/configs/rk3036_common.h b/include/configs/rk3036_common.h index 3a2bf33..e20460b 100644 --- a/include/configs/rk3036_common.h +++ b/include/configs/rk3036_common.h @@ -39,7 +39,6 @@ #define SDRAM_MAX_SIZE (CONFIG_NR_DRAM_BANKS * SDRAM_BANK_SIZE) #define CONFIG_SPI_FLASH -#define CONFIG_SPI #define CONFIG_SPI_FLASH_GIGADEVICE #define CONFIG_SF_DEFAULT_SPEED 20000000 diff --git a/include/configs/rk3128_common.h b/include/configs/rk3128_common.h index e915a56..19a2e15 100644 --- a/include/configs/rk3128_common.h +++ b/include/configs/rk3128_common.h @@ -42,7 +42,6 @@ #define SDRAM_MAX_SIZE 0x80000000 #define CONFIG_SPI_FLASH -#define CONFIG_SPI #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 diff --git a/include/configs/rk3188_common.h b/include/configs/rk3188_common.h index 0cb0762..1e14aec 100644 --- a/include/configs/rk3188_common.h +++ b/include/configs/rk3188_common.h @@ -53,7 +53,6 @@ #define SDRAM_MAX_SIZE 0x80000000 #define CONFIG_SPI_FLASH -#define CONFIG_SPI #define CONFIG_SF_DEFAULT_SPEED 20000000 #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index e2f070f..d5e7ad8 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -53,7 +53,6 @@ #define SDRAM_MAX_SIZE 0xfe000000 #define CONFIG_SPI_FLASH -#define CONFIG_SPI #define CONFIG_SF_DEFAULT_SPEED 20000000 #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/rk3328_common.h b/include/configs/rk3328_common.h index af55632..5ef7df5 100644 --- a/include/configs/rk3328_common.h +++ b/include/configs/rk3328_common.h @@ -37,7 +37,6 @@ #define SDRAM_MAX_SIZE 0xff000000 #define CONFIG_SPI_FLASH -#define CONFIG_SPI #define CONFIG_SF_DEFAULT_SPEED 20000000 #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/rut.h b/include/configs/rut.h index 71078e9..b4b82de 100644 --- a/include/configs/rut.h +++ b/include/configs/rut.h @@ -118,8 +118,6 @@ #define CONFIG_VIDEO_BMP_LOGO #define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE -#define CONFIG_SPI - #define BOARD_LCD_RESET 115 /* Bank 3 pin 19 */ #define CONFIG_FORMIKE #define DISPL_PLL_SPREAD_SPECTRUM diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 78708a2..35d425f 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -67,7 +67,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ -#define CONFIG_SPI #define CONFIG_MTD_DEVICE #define CONFIG_SF_DEFAULT_SPEED (75000000) diff --git a/include/configs/silk.h b/include/configs/silk.h index 0384325..3fdab0b 100644 --- a/include/configs/silk.h +++ b/include/configs/silk.h @@ -40,7 +40,6 @@ /* SCIF */ /* FLASH */ -#define CONFIG_SPI #define CONFIG_SH_QSPI #define CONFIG_SPI_FLASH_QUAD diff --git a/include/configs/stout.h b/include/configs/stout.h index 9422c04..e3493d0 100644 --- a/include/configs/stout.h +++ b/include/configs/stout.h @@ -43,7 +43,6 @@ #define CONFIG_SCIF_A /* SPI */ -#define CONFIG_SPI #define CONFIG_SH_QSPI #define CONFIG_SPI_FLASH_QUAD diff --git a/include/configs/taurus.h b/include/configs/taurus.h index ce06f7b..6b644a4 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -119,7 +119,6 @@ #endif /* SPI EEPROM */ -#define CONFIG_SPI #define CONFIG_ATMEL_SPI #define TAURUS_SPI_MASK (1 << 4) #define TAURUS_SPI_CS_PIN AT91_PIN_PA3 diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 91e1398..2840a90 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -99,7 +99,6 @@ #endif /* McSPI IP block */ -#define CONFIG_SPI /* GPIO block */ diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 064c546..ca72dd3 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -95,7 +95,6 @@ /*----------------------------------------------------------------------- * FLASH configuration */ -#define CONFIG_SPI /*----------------------------------------------------------------------- * Environment configuration diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 43a4ff0..3ca51f3 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -2067,7 +2067,6 @@ CONFIG_SPEAR_UART48M CONFIG_SPEAR_UARTCLKMSK CONFIG_SPEAR_USBBOOT CONFIG_SPEAR_USBTTY -CONFIG_SPI CONFIG_SPI_ADDR CONFIG_SPI_BOOTING CONFIG_SPI_CS_IS_VALID -- 2.7.4

1 0

[U-Boot] [PATCH] Convert CONFIG_SOC_DA8XX et al to Kconfig
by Adam Ford 30 Dec '17

30 Dec '17

This converts the following to Kconfig: CONFIG_SOC_DA8XX CONFIG_SOC_DA850 Signed-off-by: Adam Ford <aford173(a)gmail.com> --- README | 2 -- arch/arm/mach-davinci/Kconfig | 16 ++++++++++++++-- include/configs/calimain.h | 2 -- include/configs/da850evm.h | 2 -- include/configs/ea20.h | 2 -- include/configs/ipam390.h | 2 -- include/configs/legoev3.h | 2 -- include/configs/omapl138_lcdk.h | 1 - scripts/config_whitelist.txt | 2 -- 9 files changed, 14 insertions(+), 17 deletions(-) diff --git a/README b/README index 06f3ed0..ea7923e 100644 --- a/README +++ b/README @@ -2351,8 +2351,6 @@ The following options need to be configured: CONFIG_AT91SAM9XE enable special bootcounter support on at91sam9xe based boards. - CONFIG_SOC_DA8XX - enable special bootcounter support on da850 based boards. CONFIG_BOOTCOUNT_RAM enable support for the bootcounter in RAM CONFIG_BOOTCOUNT_I2C diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 35e4e9b..e445de6 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -6,33 +6,38 @@ choice config TARGET_IPAM390 bool "IPAM390 board" + select SOC_DA850 select SUPPORT_SPL - select SYS_DA850_PLL_INIT - select SYS_DA850_DDR_INIT + config TARGET_DA850EVM bool "DA850 EVM board" + select SOC_DA850 select SUPPORT_SPL select SYS_DA850_PLL_INIT select SYS_DA850_DDR_INIT config TARGET_EA20 bool "EA20 board" + select SOC_DA850 select BOARD_LATE_INIT config TARGET_OMAPL138_LCDK bool "OMAPL138 LCDK" + select SOC_DA850 select SUPPORT_SPL select SYS_DA850_PLL_INIT select SYS_DA850_DDR_INIT config TARGET_CALIMAIN bool "Calimain board" + select SOC_DA850 select SYS_DA850_PLL_INIT select SYS_DA850_DDR_INIT config TARGET_LEGOEV3 bool "LEGO MINDSTORMS EV3" + select SOC_DA850 select SYS_DA850_PLL_INIT select SYS_DA850_DDR_INIT @@ -46,6 +51,13 @@ config SYS_DA850_PLL_INIT config SYS_DA850_DDR_INIT bool + +config SOC_DA850 + bool + select SOC_DA8XX + +config SOC_DA8XX + bool source "board/Barix/ipam390/Kconfig" source "board/davinci/da8xxevm/Kconfig" diff --git a/include/configs/calimain.h b/include/configs/calimain.h index 60068d1..9f4fc88 100644 --- a/include/configs/calimain.h +++ b/include/configs/calimain.h @@ -22,8 +22,6 @@ * SoC Configuration */ #define CONFIG_MACH_DAVINCI_CALIMAIN -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ calimain_get_osc_freq() diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 3ca5965..82659e4 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -34,8 +34,6 @@ * SoC Configuration */ #define CONFIG_MACH_DAVINCI_DA850_EVM -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 diff --git a/include/configs/ea20.h b/include/configs/ea20.h index c5e6e9e..528d5bb 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -25,8 +25,6 @@ * SoC Configuration */ #define CONFIG_MACH_DAVINCI_DA850_EVM -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h index 1683855..6bf5b98 100644 --- a/include/configs/ipam390.h +++ b/include/configs/ipam390.h @@ -25,8 +25,6 @@ * SoC Configuration */ #define CONFIG_MACH_DAVINCI_DA850_EVM -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h index c27373c..03dc717 100644 --- a/include/configs/legoev3.h +++ b/include/configs/legoev3.h @@ -19,8 +19,6 @@ * SoC Configuration */ #define CONFIG_MACH_DAVINCI_DA850_EVM -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 5dba7d2..570322e 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -24,7 +24,6 @@ */ #define CONFIG_MACH_OMAPL138_LCDK #define CONFIG_ARM926EJS /* arm926ejs CPU core */ -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 43a4ff0..e33ef59 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -2021,8 +2021,6 @@ CONFIG_SOC_AU1100 CONFIG_SOC_AU1500 CONFIG_SOC_AU1550 CONFIG_SOC_AU1X00 -CONFIG_SOC_DA850 -CONFIG_SOC_DA8XX CONFIG_SOC_DM355 CONFIG_SOC_DM365 CONFIG_SOC_DM644X -- 2.7.4

1 0

[U-Boot] Please pull u-boot-dm (take 3)
by Simon Glass 30 Dec '17

30 Dec '17

Hi, Just three patches here. The test-coverage stuff has been pushed to u-boot-dm/next and I'll run that through again when the merge window opens. The following changes since commit 48a346061d1f0a7eff566f6a7cc7eeeba7efb1e2: Merge git://git.denx.de/u-boot-x86 (2017-12-21 09:54:10 -0500) are available in the Git repository at: git://git.denx.de/u-boot-dm.git for you to fetch changes up to 4ace304062e143da8ab7851d0c8570d61777ec06: boards: ls1046ardb: disable unavailable "ethernet" node in dts (2017-12-24 12:42:50 -0700) ---------------------------------------------------------------- Prabhakar Kushwaha (3): common: Fix-up MAC addr in dts by fetching env variable serially arm: Add support of updating dts before fix-up boards: ls1046ardb: disable unavailable "ethernet" node in dts README | 9 +++++++++ arch/arm/lib/bootm-fdt.c | 12 ++++++++++++ board/freescale/ls1046ardb/eth.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++ common/fdt_support.c | 25 +++++++++++++++++++++---- include/configs/ls1046ardb.h | 2 ++ include/fdt_support.h | 3 +++ 6 files changed, 98 insertions(+), 4 deletions(-) Regards, Simon

2 1

[U-Boot] [PULL] Please pull u-boot-imx
by Stefano Babic 30 Dec '17

30 Dec '17

Hi Tom, please pull from u-boot-imx, thanks! Series with patch causing warning: Hannu Lounento (5): net: e1000: add support for writing to EEPROM is dropped from PR until issues will be fixed. This caused a rebasing of my tree. The following changes since commit 48a346061d1f0a7eff566f6a7cc7eeeba7efb1e2: Merge git://git.denx.de/u-boot-x86 (2017-12-21 09:54:10 -0500) are available in the git repository at: git://www.denx.de/git/u-boot-imx.git master for you to fetch changes up to d6abd1d53992cf863019aed1251924c45893a46b: arm: imx: add tzic interrupt controller for imx53 (2017-12-29 11:18:59 +0100) ---------------------------------------------------------------- Adam Ford (1): mx6_common: remove dead code Breno Lima (5): mx6slevk: imximage.cfg: Handle the CONFIG_SECURE_BOOT case warp: imximage.cfg: Handle the CONFIG_SECURE_BOOT case mx6sl: Select MX6SL option via Kconfig Kconfig: mx6ull: Deselect MX6UL from CONFIG_MX6ULL imx: Kconfig: Add HAS_CAAM option Christopher Spinrath (4): ARM: imx: cm-fx6: reinstate USB support by syncing the devicetree with Linux ARM: imx: cm_fx6: defconfig: enable CONFIG_DM_KEYBOARD ARM: imx: cm_fx6: remove sata init code from board file ARM: imx: cm_fx6: remove esdhc init code from board file Fabio Estevam (3): imx: Unify CONFIG_BOOTDELAY imx: Add a common way for detecting NXP boards revision mx6sxsabresd: Load the correct dtb for revA board Lukasz Majewski (1): ARM: imx: display5: config: Update display5_factory_defconfig to use USE_BOOTCOMMAND Marek Vasut (1): ARM: imx6: Disable DDR DRAM calibration DHCOM i.MX6 PDK Martyn Welch (1): board: ge: mx53ppd: Move check_time() to common location Vagrant Cascadian (1): imx: Fix missing spl_sd configuration for wandboard. arch/arm/dts/imx53.dtsi | 8 +++ arch/arm/dts/imx6q-cm-fx6.dts | 396 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------- arch/arm/include/asm/mach-imx/sys_proto.h | 3 ++ arch/arm/mach-imx/Kconfig | 13 ++++- arch/arm/mach-imx/cpu.c | 25 +++++++++ arch/arm/mach-imx/mx6/Kconfig | 13 ++++- arch/arm/mach-imx/mx7/Kconfig | 1 + board/compulab/cm_fx6/cm_fx6.c | 71 ------------------------- board/dhelectronics/dh_imx6/dh_imx6_spl.c | 4 -- board/freescale/mx6sabreauto/mx6sabreauto.c | 47 +--------------- board/freescale/mx6slevk/imximage.cfg | 9 ++++ board/freescale/mx6sxsabresd/mx6sxsabresd.c | 16 +++++- board/ge/common/Makefile | 2 +- board/ge/common/ge_common.c | 55 +++++++++++++++++++ board/ge/common/ge_common.h | 7 +++ board/ge/mx53ppd/mx53ppd.c | 47 +--------------- board/warp/imximage.cfg | 9 ++++ configs/cm_fx6_defconfig | 1 + configs/display5_factory_defconfig | 2 + configs/mx23evk_defconfig | 1 - configs/mx25pdk_defconfig | 1 - configs/mx28evk_auart_console_defconfig | 1 - configs/mx28evk_defconfig | 1 - configs/mx28evk_nand_defconfig | 1 - configs/mx28evk_spi_defconfig | 1 - configs/mx31ads_defconfig | 1 - configs/mx31pdk_defconfig | 1 - configs/mx35pdk_defconfig | 1 - configs/mx51evk_defconfig | 1 - configs/mx53ard_defconfig | 1 - configs/mx53evk_defconfig | 1 - configs/mx53loco_defconfig | 1 - configs/mx53smd_defconfig | 1 - configs/mx6sabreauto_defconfig | 2 +- configs/mx6sabresd_defconfig | 1 - configs/mx6slevk_defconfig | 3 +- configs/mx6slevk_spinor_defconfig | 3 +- configs/mx6slevk_spl_defconfig | 3 +- configs/mx6sllevk_defconfig | 1 - configs/mx6sllevk_plugin_defconfig | 1 - configs/mx6sxsabreauto_defconfig | 1 - configs/mx6sxsabresd_defconfig | 2 +- configs/mx6sxsabresd_spl_defconfig | 2 +- configs/mx6ul_14x14_evk_defconfig | 1 - configs/mx6ul_9x9_evk_defconfig | 1 - configs/mx6ull_14x14_evk_defconfig | 1 - configs/mx6ull_14x14_evk_plugin_defconfig | 1 - configs/mx7dsabresd_defconfig | 1 - configs/mx7dsabresd_secure_defconfig | 1 - configs/wandboard_defconfig | 1 + configs/warp_defconfig | 2 +- include/configs/mx6_common.h | 3 -- include/configs/mx6sxsabresd.h | 8 ++- include/power/pmic.h | 1 + 54 files changed, 520 insertions(+), 263 deletions(-) create mode 100644 board/ge/common/ge_common.c create mode 100644 board/ge/common/ge_common.h Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic(a)denx.de =====================================================================

2 1

[U-Boot] [PATCH v2 0/5] Remove assert()
by Masahiro Yamada 30 Dec '17

30 Dec '17

assert() is almost used in the same way as BUG_ON(), except: - the logic is opposite - currently, assert() is compiled only when DEBUG is defined Coccinelle can easily convert assert() to BUG_ON(), but the problem is it would grow the image size. In v2, I introduced CONFIG_ENABLE_BUG_CHECKS. This option is 'n' by default, and makes it BUG_ON etc. into no-op. Masahiro Yamada (5): Move CONFIG_PANIC_HANG to Kconfig Enable CONFIG_PANIC_HANG for boards without do_reset() Introduce CONFIG_ENABLE_BUG_CHECKS to disable BUG{_ON} by default treewide: convert assert() to BUG_ON() Remove assert() README | 10 ---- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 3 + arch/arm/mach-exynos/clock.c | 4 +- arch/arm/mach-tegra/clock.c | 10 ++-- arch/arm/mach-tegra/pinmux-common.c | 80 +++++++++++++-------------- arch/arm/mach-tegra/tegra114/clock.c | 10 ++-- arch/arm/mach-tegra/tegra124/clock.c | 10 ++-- arch/arm/mach-tegra/tegra20/clock.c | 14 ++--- arch/arm/mach-tegra/tegra210/clock.c | 10 ++-- arch/arm/mach-tegra/tegra30/clock.c | 10 ++-- arch/powerpc/cpu/mpc85xx/Kconfig | 37 +++++++++++++ arch/sandbox/cpu/state.c | 4 +- arch/x86/cpu/intel_common/mrc.c | 2 +- arch/x86/lib/efi/efi.c | 2 +- arch/x86/lib/fsp/fsp_support.c | 6 +- arch/x86/lib/physmem.c | 5 +- board/freescale/qemu-ppce500/qemu-ppce500.c | 8 +-- cmd/bootefi.c | 2 +- cmd/mtdparts.c | 2 +- cmd/tpm_test.c | 28 +++++----- common/dlmalloc.c | 86 ++++++++++++++--------------- common/fdt_support.c | 2 +- common/hwconfig.c | 36 ++++++------ configs/TWR-P1025_defconfig | 1 + configs/UCP1020_SPIFLASH_defconfig | 1 + configs/UCP1020_defconfig | 1 + configs/adp-ae3xx_defconfig | 1 + configs/cl-som-imx7_defconfig | 1 + configs/evb-rk3229_defconfig | 1 + configs/mccmon6_sd_defconfig | 1 + configs/opos6uldev_defconfig | 1 + configs/qemu-ppce500_defconfig | 1 + configs/tricorder_defconfig | 1 + configs/tricorder_flash_defconfig | 1 + configs/uniphier_ld4_sld8_defconfig | 1 + configs/uniphier_v7_defconfig | 1 + configs/uniphier_v8_defconfig | 1 + configs/xpedite517x_defconfig | 1 + configs/xpedite520x_defconfig | 1 + configs/xpedite537x_defconfig | 1 + configs/xpedite550x_defconfig | 1 + drivers/clk/clk-uclass.c | 2 +- drivers/clk/rockchip/clk_rk3036.c | 23 ++++---- drivers/clk/rockchip/clk_rk3128.c | 27 ++++----- drivers/clk/rockchip/clk_rk3188.c | 28 ++++------ drivers/clk/rockchip/clk_rk322x.c | 23 ++++---- drivers/clk/rockchip/clk_rk3288.c | 36 +++++------- drivers/clk/rockchip/clk_rk3328.c | 8 +-- drivers/clk/rockchip/clk_rk3368.c | 4 +- drivers/clk/rockchip/clk_rk3399.c | 51 +++++++---------- drivers/clk/rockchip/clk_rv1108.c | 2 +- drivers/core/device-remove.c | 8 +-- drivers/core/device.c | 2 +- drivers/core/ofnode.c | 24 ++++---- drivers/core/uclass.c | 4 +- drivers/gpio/gpio-uclass.c | 2 +- drivers/i2c/i2c-uclass.c | 2 +- drivers/input/input.c | 4 +- drivers/input/key_matrix.c | 2 +- drivers/misc/cros_ec.c | 10 ++-- drivers/misc/cros_ec_i2c.c | 4 +- drivers/mtd/nand/tegra_nand.c | 2 +- drivers/mtd/spi/sandbox.c | 4 +- drivers/net/fsl-mc/mc.c | 2 +- drivers/phy/phy-uclass.c | 2 +- drivers/power/tps6586x.c | 4 +- drivers/rtc/rtc-uclass.c | 10 ++-- drivers/sound/sound.c | 2 +- drivers/spi/exynos_spi.c | 6 +- drivers/usb/emul/sandbox_flash.c | 2 +- drivers/usb/host/usb-uclass.c | 4 +- drivers/video/stb_truetype.h | 2 +- fs/ext4/dev.c | 2 +- fs/ext4/ext4_common.c | 2 +- fs/ext4/ext4_journal.c | 2 +- fs/fat/fat.c | 2 +- include/common.h | 15 ----- include/configs/B4860QDS.h | 1 - include/configs/C29XPCIE.h | 1 - include/configs/MPC8536DS.h | 1 - include/configs/MPC8544DS.h | 1 - include/configs/MPC8572DS.h | 1 - include/configs/P1010RDB.h | 1 - include/configs/P1023RDB.h | 2 - include/configs/P2041RDB.h | 1 - include/configs/T102xQDS.h | 1 - include/configs/T102xRDB.h | 1 - include/configs/T1040QDS.h | 1 - include/configs/T104xRDB.h | 1 - include/configs/T4240RDB.h | 1 - include/configs/UCP1020.h | 1 - include/configs/adp-ae3xx.h | 1 - include/configs/corenet_ds.h | 1 - include/configs/cyrus.h | 1 - include/configs/ls1012a_common.h | 1 - include/configs/ls1088a_common.h | 2 - include/configs/ls2080a_common.h | 2 - include/configs/p1_p2_rdb_pc.h | 1 - include/configs/p1_twr.h | 1 - include/configs/qemu-ppce500.h | 1 - include/configs/t4qds.h | 1 - include/configs/tricorder.h | 1 - include/configs/uniphier.h | 2 - include/configs/xpedite517x.h | 1 - include/configs/xpedite520x.h | 1 - include/configs/xpedite537x.h | 1 - include/configs/xpedite550x.h | 1 - include/configs/xtfpga.h | 4 -- include/dm/ofnode.h | 4 +- include/efi_loader.h | 12 ++-- include/linux/bug.h | 9 ++- lib/Kconfig | 17 ++++++ lib/circbuf.c | 16 +++--- lib/efi_loader/efi_boottime.c | 2 +- lib/efi_loader/efi_device_path.c | 2 +- lib/efi_loader/efi_file.c | 2 +- lib/efi_loader/efi_memory.c | 2 +- lib/fdtdec.c | 8 +-- lib/membuff.c | 4 +- lib/physmem.c | 4 +- lib/qsort.c | 2 +- lib/slre.c | 8 +-- lib/tiny-printf.c | 9 --- lib/vsprintf.c | 9 --- net/eth-uclass.c | 2 +- net/eth_legacy.c | 2 +- net/net.c | 2 +- test/command_ut.c | 30 +++++----- test/compression.c | 16 +++--- test/print_ut.c | 42 +++++++------- 130 files changed, 466 insertions(+), 504 deletions(-) -- 2.7.4

5 13

[U-Boot] [PATCH v2 00/23]Fix and extend i.MX HAB layer
by Bryan O'Donoghue 29 Dec '17

29 Dec '17

v2: - Fix compilation warnings and errors in SPL highlighted by Breno Matheus Lima - Add CC: Breno Matheus Lima <brenomatheus(a)gmail.com> to all patches v1: This patchset updates the i.MX HAB layer in u-boot to fix a list of identified issues and then to add and extend existing functionality. The first block of patches 0001-0006 deal with fixing existing code, - Fixes indentation - Fixes the treatment of input parameters to hab_auth_image. The second block of patches 0007-0013 are about tidying up the HAB code - Remove reliance on hard-coding to specific offsets - IVT header drives locating CSF - Continue to support existing boards Patches 0014 onwards extend out the HAB functionality. - hab_rvt_check_target is a recommended check in the NXP documents to perform prior to hab_rvt_authenticate_image - hab_rvt_failsafe is a useful function to set the board into BootROM USB recovery mode. Bryan O'Donoghue (23): arm: imx: hab: Make authenticate_image return int arm: imx: hab: Fix authenticate_image result code arm: imx: hab: Optimise flow of authenticate_image on is_enabled fail arm: imx: hab: Optimise flow of authenticate_image on hab_entry fail arm: imx: hab: Move IVT_SIZE to hab.h arm: imx: hab: Move CSF_PAD_SIZE to hab.h arm: imx: hab: Fix authenticate_image input parameters arm: imx: hab: Fix authenticate image lockup on MX7 arm: imx: hab: Add IVT header definitions arm: imx: hab: Add IVT header verification arm: imx: hab: Verify IVT self matches calculated address arm: imx: hab: Print CSF based on IVT descriptor arm: imx: hab: Print additional IVT elements during debug arm: imx: hab: Define rvt_check_target() arm: imx: hab: Implement hab_rvt_check_target arm: imx: hab: Add a hab_rvt_check_target to image auth arm: imx: hab: Make internal functions and data static arm: imx: hab: Prefix authenticate_image with imx_hab arm: imx: hab: Rename is_hab_enabled imx_hab_is_enabled arm: imx: hab: Make imx_hab_is_enabled global arm: imx: hab: Define rvt_failsafe() arm: imx: hab: Implement hab_rvt_failsafe arm: imx: hab: Add hab_failsafe console command arch/arm/include/asm/mach-imx/hab.h | 46 +++- arch/arm/mach-imx/hab.c | 476 ++++++++++++++++++++++-------------- arch/arm/mach-imx/spl.c | 38 ++- 3 files changed, 368 insertions(+), 192 deletions(-) -- 2.7.4

2 28