April 2016 - U-Boot

[U-Boot] [PATCH 0/3] fix for build break with CONFIG_DISK scsi_init()
by Mugunthan V N 09 Apr '16

09 Apr '16

This series fixes the build break with the SATA DM bringup series on TI DRA7xx platformi [1]. Simon, I am not able to build the seires for chromebook_link, may be because of the compiler I have, can you verify this series? arch/x86/lib/built-in.o: In function `__wrap___udivdi3': /home/mugunthan/workspace/git/work/u-boot/dm-sata/arch/x86/lib/gcc.c:25: undefined reference to `__normal___udivdi3' Makefile:1171: recipe for target 'u-boot' failed make: *** [u-boot] Error 1 [1]: https://www.mail-archive.com/u-boot@lists.denx.de/msg202781.html Mugunthan V N (3): drivers: block: Kconfig: set default n to CONFIG_DISK configs: chromebook_link: enable CONFIG_DISK for accessing sata disk drive cmd: scsi: compile out scsi_init when CONFIG_DISK is defined cmd/scsi.c | 3 ++- configs/chromebook_link_defconfig | 1 + drivers/block/Kconfig | 2 +- 3 files changed, 4 insertions(+), 2 deletions(-) -- 2.7.2.333.g70bd996

3 8

[U-Boot] [PATCH 1/3] sunxi: Add INITIAL_USB_SCAN_DELAY Kconfig option
by Hans de Goede 09 Apr '16

09 Apr '16

Some boards have on board usb devices which need longer then the USB spec's 1 second to connect from board powerup. Add a config option which when non 0 adds an extra delay before the first usb bus scan. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- arch/arm/mach-sunxi/usb_phy.c | 7 +++++++ board/sunxi/Kconfig | 9 +++++++++ 2 files changed, 16 insertions(+) diff --git a/arch/arm/mach-sunxi/usb_phy.c b/arch/arm/mach-sunxi/usb_phy.c index b258ce4..f9993d2 100644 --- a/arch/arm/mach-sunxi/usb_phy.c +++ b/arch/arm/mach-sunxi/usb_phy.c @@ -85,6 +85,8 @@ static struct sunxi_usb_phy { #endif }; +static int initial_usb_scan_delay = CONFIG_INITIAL_USB_SCAN_DELAY; + static int get_vbus_gpio(int index) { switch (index) { @@ -269,6 +271,11 @@ void sunxi_usb_phy_power_on(int index) { struct sunxi_usb_phy *phy = &sunxi_usb_phy[index]; + if (initial_usb_scan_delay) { + mdelay(initial_usb_scan_delay); + initial_usb_scan_delay = 0; + } + phy->power_on_count++; if (phy->power_on_count != 1) return; diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 464fa0f..2b0d1df 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -312,6 +312,15 @@ config MMC_SUNXI_SLOT_EXTRA slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable support for this. +config INITIAL_USB_SCAN_DELAY + int "delay initial usb scan by x ms to allow builtin devices to init" + default 0 + ---help--- + Some boards have on board usb devices which need longer then the + USB spec's 1 second to connect from board powerup. Set this config + option to a non 0 value to add an extra delay before the first usb + bus scan. + config USB0_VBUS_PIN string "Vbus enable pin for usb0 (otg)" default "" -- 2.7.2

2 8

[U-Boot] ITEAD Board (A20) fails to communicate on boot unless UART is connected
by Kevin Welsh 09 Apr '16

09 Apr '16

I'm trying to resolve a strange networking issue with the ITEAD Core EVB + AW2041 module. If I connect all 3 UART wires (GND, RCV & TX) between the board and a USB UART device: I get an IP 100% of the time. If I connect only TX & RCV: I get an IP 100%. If I connect TX & GND, I get an IP 100%. But, if I only connect RCV and GND... I do not get an IP. Using WireShark on the DHCP server, I see no traffic is generated by the device. If I connect the UART after booting, it will not work, even if I send DHCPCD commands, or reboot. The only thing that seems to work is if I apply power while the UART is connected.

2 1

[U-Boot] [PATCH 1/7] sniper: Include explicit serial baudrate on bootargs
by Paul Kocialkowski 09 Apr '16

09 Apr '16

This makes the baudrate for the kernel command line explicit. Signed-off-by: Paul Kocialkowski <contact(a)paulk.fr> --- include/configs/sniper.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/sniper.h b/include/configs/sniper.h index 171a8c4..cb25c0a 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -252,7 +252,7 @@ "recovery_mmc_part=4\0" \ "fdtfile=omap3-sniper.dtb\0" \ "bootfile=/boot/extlinux/extlinux.conf\0" \ - "bootargs=console=ttyO2 vram=5M,0x9FA00000 omapfb.vram=0:5M\0" + "bootargs=console=ttyO2,115200 vram=5M,0x9FA00000 omapfb.vram=0:5M\0" /* * ATAGs -- 2.7.4

2 15

[U-Boot] Problem with sf write on Arria 5.
by Bakhvalov, Denis (Nokia - PL/Wroclaw) 09 Apr '16

09 Apr '16

Dear U-Boot support, I'm migrating to new U-Boot version from 2013 and now have problem with writing to the flash. I have custom board with Altera Arria 5 SocFpga. U-Boot version: 2016.03-rc1 My flash: SF: Detected S25FL512S_256K with page size 512 Bytes, erase size 256 KiB, total 64 MiB I'm rewriting the flash with the image that I downloaded from tftp. #> tftp 0x1B000000 flash.bin Then I'm trying to write it to the flash: #> sf erase ... #> sf write ... After that if I try to mount Ubi partition (this is read operation) I receive failures (usually checksum errors). So, the problem is that when I'm writing some data to flash and reading it back the data is corrupted. I'm almost sure that there is no issue with reading, because previously I was able to read big amount of data successfully (for example, reading OS image and booting it). With previous version (2013) there is no such issue. With the same sequence of commands I was able to update entire flash. I was able to reduce this problem to a smaller one. I'm checking consistency of write operation by writing zipped file (3 KB): #> tftp 0x1B000000 file.zip #> sf erase <flash_addr> <flash_offset> #> sf write <mem_addr1> <flash_addr> <flash_offset> #> sf read <mem_addr2> <flash_addr> <flash_offset> #> unzip <mem_addr2> <mem_addr3> And sometimes I can see: Uncompressed size: 524288 = 0x80000 (success) but more often: Error: inflate() returned -3 (data was corrupted) So, the problem appears to be occasional. When I'm comparing the original data with the data that I've read from flash I can see the blocks of 256 bytes were not written (0xffffffff). For example: Original data: 1b000200: c62e214e 0e48a4c9 19038ec8 37531cfd N!....H.......S7 1b000210: 8f1c7048 f60b861f e9482d5c 857404e8 Hp......\-H...t. 1b000220: ef3996c1 fd02b093 2ee8d1f6 679ab03d ..9.........=..g 1b000230: e6c739f4 194eaec7 383ddca8 6f90a2ad .9....N...=8...o ... and so on until (1b000300) Stored data: 1f000200: ffffffff ffffffff ffffffff ffffffff ................ 1f000210: ffffffff ffffffff ffffffff ffffffff ................ 1f000220: ffffffff ffffffff ffffffff ffffffff ................ 1f000230: ffffffff ffffffff ffffffff ffffffff ................ ... and so on until (1f000300) I already checked difference in QSPI registers (base address: 0xFF705000) between two versions of U-Boot, but haven't found any clue yet. If needed I can provide this diff. All hints are welcome. Best regards, Denis Bakhvalov

3 11

[U-Boot] [RFC v1 PATCH 1/1] mpc85xx: Enable pre-relocation malloc for MPC85xx
by Mario Six 09 Apr '16

09 Apr '16

To enable DM on MPC85xx, we need pre-relocation malloc, which is implemented in this patch. Signed-off-by: Mario Six <mario.six(a)gdsys.cc> Cc: York Sun <york.sun(a)nxp.com> Cc: Simon Glass <sjg(a)chromium.org> --- arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 8 -------- arch/powerpc/cpu/mpc85xx/start.S | 28 ++++++++++++++++++++++++++++ 2 files changed, 28 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c index 235a635..e6e1688 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c @@ -82,7 +82,6 @@ void setup_ifc(void) void cpu_init_early_f(void *fdt) { u32 mas0, mas1, mas2, mas3, mas7; - int i; #ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); #endif @@ -95,13 +94,6 @@ void cpu_init_early_f(void *fdt) /* Pointer is writable since we allocated a register for it */ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); - /* - * Clear initial global data - * we don't use memset so we can share this code with NAND_SPL - */ - for (i = 0; i < sizeof(gd_t); i++) - ((char *)gd)[i] = 0; - #ifdef CONFIG_QEMU_E500 /* * CONFIG_SYS_CCSRBAR_PHYS below may use gd->fdt_blob on ePAPR systems, diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index d867e2a..e6b5203 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -1152,6 +1152,34 @@ _start_cont: /* Setup the stack in initial RAM,could be L2-as-SRAM or L1 dcache*/ lis r3,(CONFIG_SYS_INIT_RAM_ADDR)@h ori r3,r3,((CONFIG_SYS_INIT_SP_OFFSET-16)&~0xf)@l /* Align to 16 */ + +#ifdef CONFIG_SYS_MALLOC_F_LEN + /* Leave 16+ byte for back chain termination and NULL return address */ + subi r3,r3,((CONFIG_SYS_MALLOC_F_LEN+16+15)&~0xf) + + /* End of RAM */ + lis r4,(CONFIG_SYS_INIT_RAM_ADDR)@h + ori r4,r4,(CONFIG_SYS_INIT_RAM_SIZE)@l + + li r0,0 + +1: subi r4,r4,4 + stw r0,0(r4) + cmplw r4,r3 + bne 1b + + lis r4,(CONFIG_SYS_INIT_RAM_ADDR)@h + ori r4,r4,(CONFIG_SYS_GBL_DATA_OFFSET)@l + + addi r3,r3,16 /* Pre-relocation malloc area */ + stw r3,GD_MALLOC_BASE(r4) + subi r3,r3,16 + + /* Fix issue with exception handler alignment */ + nop + nop + nop +#endif li r0,0 stw r0,0(r3) /* Terminate Back Chain */ stw r0,+4(r3) /* NULL return address. */ -- 2.7.0.GIT

2 14

[U-Boot] [PATCH] powerpc: Replace CONFIG_SYS_INIT_RAM_END with CONFIG_SYS_INIT_RAM_SIZE
by York Sun 09 Apr '16

09 Apr '16

CONFIG_SYS_INIT_RAM_SIZE may be used out of the board header file. Some boards use CONFIG_SYS_INIT_RAM_END for the same purpose. To unify the macros, use CONFIG_SYS_INIT_RAM_SIZE for all. Signed-off-by: York Sun <york.sun(a)nxp.com> CC: Mario Six <mario.six(a)gdsys.cc> --- include/configs/BSC9131RDB.h | 4 ++-- include/configs/BSC9132QDS.h | 4 ++-- include/configs/C29XPCIE.h | 4 ++-- include/configs/P1010RDB.h | 4 ++-- include/configs/a3m071.h | 4 ++-- include/configs/ac14xx.h | 4 ++-- include/configs/dlvision-10g.h | 4 ++-- include/configs/io.h | 4 ++-- include/configs/iocon.h | 4 ++-- include/configs/o2dnt-common.h | 6 +++--- 10 files changed, 21 insertions(+), 21 deletions(-) diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index 9c32a01..e870ffe 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -215,9 +215,9 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ -#define CONFIG_SYS_INIT_RAM_END 0x00004000/* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000/* End of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 9f7ceb8..108e924 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -396,9 +396,9 @@ combinations. this should be removed later #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ -#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* End of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index 4cbc9ad..a7a5e8e 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -329,9 +329,9 @@ #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 -#define CONFIG_SYS_INIT_RAM_END 0x00004000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 81af871..249e11b 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -555,9 +555,9 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ -#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* End of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index cf931a6..31348da 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -141,9 +141,9 @@ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h index 750d8ff..57421c6 100644 --- a/include/configs/ac14xx.h +++ b/include/configs/ac14xx.h @@ -289,9 +289,9 @@ /* Use SRAM for initial stack */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index 9f9bcb8..bbeed76 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -238,10 +238,10 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_END - GENERATED_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/io.h b/include/configs/io.h index 1213fe2..f05eb0a 100644 --- a/include/configs/io.h +++ b/include/configs/io.h @@ -196,10 +196,10 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_END - GENERATED_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/iocon.h b/include/configs/iocon.h index 8bc89a0..f75ca76 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -249,10 +249,10 @@ int fpga_gpio_get(unsigned int bus, int pin); #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_END - GENERATED_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h index 73a44a7..4ffab8a 100644 --- a/include/configs/o2dnt-common.h +++ b/include/configs/o2dnt-common.h @@ -253,13 +253,13 @@ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #ifdef CONFIG_POST /* preserve space for the post_word at end of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE #else /* End of used area in DPRAM */ -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE #endif -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -- 1.7.9.5

3 4

[U-Boot] [PATCH] drivers: net: vsc9953: Fix bug when PVID is shown for disabled ports only
by Codrin Ciubotariu 09 Apr '16

09 Apr '16

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu(a)nxp.com> --- drivers/net/vsc9953.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/vsc9953.c b/drivers/net/vsc9953.c index 44afe14..ef1435f 100644 --- a/drivers/net/vsc9953.c +++ b/drivers/net/vsc9953.c @@ -335,7 +335,7 @@ static int vsc9953_port_vlan_pvid_get(int port_nr, int *pvid) struct vsc9953_analyzer *l2ana_reg; /* Administrative down */ - if (vsc9953_l2sw.port[port_nr].enabled) { + if (!vsc9953_l2sw.port[port_nr].enabled) { printf("Port %d is administrative down\n", port_nr); return -1; } -- 1.9.3

3 8

[U-Boot] Please pull u-boot-fsl-qoriq master
by York Sun 08 Apr '16

08 Apr '16

Tom, The following changes since commit 4ed6ed3c27a069a00c8a557d606a05276cc4653e: Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze (2016-04-04 14:34:09 -0400) are available in the git repository at: git://git.denx.de/u-boot-fsl-qoriq.git master for you to fetch changes up to 3c1d218a1d3048fb576677c47eab43049d0b7778: armv8: LS2080A: Consolidate LS2080A and LS2085A (2016-04-06 10:26:46 -0700) ---------------------------------------------------------------- Codrin Ciubotariu (2): drivers: net: vsc9953: Do not configure disabled ports drivers: net: vsc9953: Fix bug when PVID is shown for disabled ports only Ed Swarthout (1): armv8: LSCH2 early and final mmu needs matching NS attribute Peng Fan (2): fsl: esdhc: support driver model fsl: esdhc: consolidate fsl_esdhc_cfg structure Qianyu Gong (2): armv8: ls1043a: load Fman ucode from NAND flash under NAND boot armv8: ls1043a: load Fman ucode from SD/MMC under SD boot Shaohui Xie (1): armv8: ls1043aqds: make sure fixed-link property is big endian Vincent Siles (1): arm: ls102xa: Fix order of CSU indexes in ns_access.h Wenbin Song (1): armv8/ls1043aqds: modify CONFIG_SYS_MAX_FLASH_BANKS to 1 York Sun (1): armv8: LS2080A: Consolidate LS2080A and LS2085A arch/arm/cpu/armv8/fsl-layerscape/Makefile | 4 - arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 9 +- .../arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c | 6 +- arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 2 +- arch/arm/cpu/armv8/fsl-layerscape/soc.c | 26 +- arch/arm/cpu/armv8/fsl-layerscape/spl.c | 4 +- arch/arm/include/asm/arch-fsl-layerscape/config.h | 9 +- arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 14 +- .../include/asm/arch-fsl-layerscape/fsl_serdes.h | 2 +- arch/arm/include/asm/arch-fsl-layerscape/soc.h | 3 + arch/arm/include/asm/arch-ls102xa/ns_access.h | 6 +- arch/arm/include/asm/fsl_secure_boot.h | 12 +- board/freescale/ls1043aqds/eth.c | 12 +- board/freescale/ls2080a/MAINTAINERS | 2 - board/freescale/ls2080a/ddr.c | 27 ++- board/freescale/ls2080a/ls2080a.c | 2 +- board/freescale/ls2080aqds/MAINTAINERS | 3 - board/freescale/ls2080aqds/ddr.c | 27 ++- board/freescale/ls2080aqds/ls2080aqds.c | 2 +- board/freescale/ls2080ardb/MAINTAINERS | 3 - board/freescale/ls2080ardb/ddr.c | 27 ++- board/freescale/ls2080ardb/ls2080ardb.c | 2 +- configs/ls2085a_emu_defconfig | 20 -- configs/ls2085a_simu_defconfig | 21 -- configs/ls2085aqds_SECURE_BOOT_defconfig | 20 -- configs/ls2085aqds_defconfig | 19 -- configs/ls2085aqds_nand_defconfig | 14 -- configs/ls2085ardb_SECURE_BOOT_defconfig | 20 -- configs/ls2085ardb_defconfig | 19 -- configs/ls2085ardb_nand_defconfig | 14 -- doc/device-tree-bindings/serial/8250.txt | 2 +- drivers/crypto/fsl/jr.c | 6 +- drivers/mmc/fsl_esdhc.c | 253 ++++++++++++++++---- drivers/net/fsl-mc/mc.c | 10 + drivers/net/ldpaa_eth/Makefile | 1 - drivers/net/vsc9953.c | 14 +- include/configs/ls1043a_common.h | 14 +- include/configs/ls1043aqds.h | 2 +- include/configs/ls2080a_common.h | 7 +- include/configs/ls2080a_emu.h | 7 - include/configs/ls2080a_simu.h | 7 - include/fsl_esdhc.h | 6 +- include/linux/usb/xhci-fsl.h | 2 +- 43 files changed, 369 insertions(+), 313 deletions(-) delete mode 100644 configs/ls2085a_emu_defconfig delete mode 100644 configs/ls2085a_simu_defconfig delete mode 100644 configs/ls2085aqds_SECURE_BOOT_defconfig delete mode 100644 configs/ls2085aqds_defconfig delete mode 100644 configs/ls2085aqds_nand_defconfig delete mode 100644 configs/ls2085ardb_SECURE_BOOT_defconfig delete mode 100644 configs/ls2085ardb_defconfig delete mode 100644 configs/ls2085ardb_nand_defconfig Thanks. York

2 1

[U-Boot] [PATCH 1/8 v2] usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig
by Semen Protsenko 08 Apr '16

08 Apr '16

From: Sam Protsenko <semen.protsenko(a)linaro.org> The description was borrowed from kernel. Definitions were added to defconfig files in a way that "make savedefconfig" generates exactly the same file as used defconfig. Boards using 0 mA as CONFIG_USB_GADGET_VBUS_DRAW value were moved to use 2 mA (as minimal allowed by Kconfig). Signed-off-by: Sam Protsenko <semen.protsenko(a)linaro.org> --- Changes for v2: - set minimal VBUS_DRAW value to 2 mA in range in Kconfig - set minimal VBUS_DRAW values to 2 mA for all boards (even for ones that are using 0 mA) drivers/usb/gadget/Kconfig | 21 +++++++++++++++++++++ include/configs/am335x_evm.h | 1 - include/configs/am43xx_evm.h | 5 ++++- include/configs/baltos.h | 1 - include/configs/bav335x.h | 1 - include/configs/bcm28155_ap.h | 1 - include/configs/cgtqmx6eval.h | 1 - include/configs/colibri_vf.h | 1 - include/configs/corvus.h | 1 - include/configs/dra7xx_evm.h | 1 - include/configs/exynos4-common.h | 1 - include/configs/gw_ventana.h | 1 - include/configs/kc1.h | 1 - include/configs/mx6sabre_common.h | 1 - include/configs/mx7dsabresd.h | 1 - include/configs/nitrogen6x.h | 1 - include/configs/odroid_xu3.h | 1 - include/configs/omap3_beagle.h | 1 - include/configs/omap3_logic.h | 1 - include/configs/omap5_uevm.h | 1 - include/configs/pengwyn.h | 1 - include/configs/s5p_goni.h | 1 - include/configs/siemens-am33x-common.h | 1 - include/configs/smartweb.h | 1 - include/configs/sniper.h | 1 - include/configs/socfpga_common.h | 1 - include/configs/sunxi-common.h | 1 - include/configs/taurus.h | 1 - include/configs/tbs2910.h | 1 - include/configs/tegra-common-usb-gadget.h | 1 - include/configs/warp.h | 1 - include/configs/xilinx_zynqmp.h | 1 - include/configs/zynq-common.h | 1 - 33 files changed, 25 insertions(+), 32 deletions(-) diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index f4698f4..cfd8ce8 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -33,3 +33,24 @@ menuconfig USB_GADGET a USB peripheral device. Configure one hardware driver for your peripheral/device side bus controller, and a "gadget driver" for your peripheral protocol. + +if USB_GADGET + +config USB_GADGET_VBUS_DRAW + int "Maximum VBUS Power usage (2-500 mA)" + range 2 500 + default 2 + help + Some devices need to draw power from USB when they are + configured, perhaps to operate circuitry or to recharge + batteries. This is in addition to any local power supply, + such as an AC adapter or batteries. + + Enter the maximum power your device draws through USB, in + milliAmperes. The permitted range of values is 2 - 500 mA; + 0 mA would be legal, but can make some hosts misbehave. + + This value will be used except for system-specific gadget + drivers that have more specific information. + +endif # USB_GADGET diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 29b693a..8d68d60 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -290,7 +290,6 @@ #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_USB_MUSB_HOST #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index fd3f6a7..0dd9c7a7 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -122,6 +122,10 @@ #endif /* USB GADGET */ +#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USBETH_SUPPORT) +#undef CONFIG_USB_GADGET_VBUS_DRAW +#endif + #if !defined(CONFIG_SPL_BUILD) || \ (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)) #define CONFIG_USB_DWC3_PHY_OMAP @@ -130,7 +134,6 @@ #define CONFIG_USB_DWC3_GADGET #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" #define CONFIG_G_DNL_VENDOR_NUM 0x0403 #define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 diff --git a/include/configs/baltos.h b/include/configs/baltos.h index bfe3fa3..529cf1c 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -276,7 +276,6 @@ #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_USBDOWNLOAD_GADGET #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_USB_MUSB_HOST #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_HOST diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h index 6c860a6..82bf92a 100644 --- a/include/configs/bav335x.h +++ b/include/configs/bav335x.h @@ -441,7 +441,6 @@ DEFAULT_LINUX_BOOT_ENV \ #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_USB_MUSB_HOST #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h index cf25bde..387895b 100644 --- a/include/configs/bcm28155_ap.h +++ b/include/configs/bcm28155_ap.h @@ -139,7 +139,6 @@ #define CONFIG_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - SZ_1M) #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 0 #define CONFIG_USB_GADGET_DWC2_OTG #define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY #define CONFIG_USB_GADGET_DOWNLOAD diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h index 63e3b94..3f3b69d 100644 --- a/include/configs/cgtqmx6eval.h +++ b/include/configs/cgtqmx6eval.h @@ -93,7 +93,6 @@ #define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_G_DNL_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 7f57a54..63dbe12 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -235,7 +235,6 @@ /* USB Client Support */ #define CONFIG_CI_UDC #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_TRDX_VID 0x1B67 #define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016 #define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017 diff --git a/include/configs/corvus.h b/include/configs/corvus.h index fcf2bd6..b8c441e 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -125,7 +125,6 @@ #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_NAND #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M) #define DFU_MANIFEST_POLL_TIMEOUT 25000 diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 7734e8d..e9facae 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -233,7 +233,6 @@ #define CONFIG_USB_DWC3_GADGET #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" #define CONFIG_G_DNL_VENDOR_NUM 0x0451 #define CONFIG_G_DNL_PRODUCT_NUM 0xd022 diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h index 008d24c..c8e5397 100644 --- a/include/configs/exynos4-common.h +++ b/include/configs/exynos4-common.h @@ -53,7 +53,6 @@ #define CONFIG_USB_GADGET_DWC2_OTG #define CONFIG_USB_GADGET_DWC2_OTG_PHY #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 793b3fb..62f3468 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -196,7 +196,6 @@ #define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 /* Netchip IDs */ #define CONFIG_G_DNL_VENDOR_NUM 0x0525 diff --git a/include/configs/kc1.h b/include/configs/kc1.h index ee7d9ce..d8aa182 100644 --- a/include/configs/kc1.h +++ b/include/configs/kc1.h @@ -185,7 +185,6 @@ #define CONFIG_USB_MUSB_OMAP2PLUS #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 0 /* * Download diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index ceea74e..299f11b 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -241,7 +241,6 @@ #define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_G_DNL_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index 5d897c2..506ac32 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -256,7 +256,6 @@ #define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_G_DNL_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 3604e44..a50829e 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -333,7 +333,6 @@ #define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 /* Netchip IDs */ #define CONFIG_G_DNL_VENDOR_NUM 0x0525 diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 01d08dc..e4986b0 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -54,7 +54,6 @@ /* USB gadget */ #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 /* Downloader */ #define CONFIG_G_DNL_VENDOR_NUM 0x04E8 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 2112d9f..17d8a86 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -66,7 +66,6 @@ #define CONFIG_TWL4030_USB 1 #define CONFIG_USB_ETHER #define CONFIG_USB_ETHER_RNDIS -#define CONFIG_USB_GADGET_VBUS_DRAW 0 #define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_G_DNL_VENDOR_NUM 0x0451 #define CONFIG_G_DNL_PRODUCT_NUM 0xd022 diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 304e1ce..7e802e9 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -85,7 +85,6 @@ #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_ETHER #define CONFIG_USB_ETHER_RNDIS -#define CONFIG_USB_GADGET_VBUS_DRAW 0 #define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_G_DNL_VENDOR_NUM 0x0451 #define CONFIG_G_DNL_PRODUCT_NUM 0xd022 diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index a5cfa0c..09beb74 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -106,7 +106,6 @@ #define CONFIG_USB_DWC3_GADGET #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" #define CONFIG_G_DNL_VENDOR_NUM 0x0403 #define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h index 1a670cb..ec3fcba 100644 --- a/include/configs/pengwyn.h +++ b/include/configs/pengwyn.h @@ -200,7 +200,6 @@ #define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_USB_MUSB_HOST #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 07a5134..919c60e 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -273,7 +273,6 @@ #define CONFIG_USB_GADGET_DWC2_OTG #define CONFIG_USB_GADGET_DWC2_OTG_PHY #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index df2a514..df4e734 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -225,7 +225,6 @@ #define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #undef CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_USB_MUSB_HOST #define CONFIG_AM335X_USB0 diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index db820ba..0586aec 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -176,7 +176,6 @@ #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_NAND #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_1M #define DFU_MANIFEST_POLL_TIMEOUT 25000 diff --git a/include/configs/sniper.h b/include/configs/sniper.h index 18a379d..12090a3 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -202,7 +202,6 @@ #define CONFIG_TWL4030_USB #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 0 /* * Download diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 07519c1..a42e6d7 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -254,7 +254,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE) #define CONFIG_USB_GADGET_DWC2_OTG #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 /* USB Composite download gadget - g_dnl */ #define CONFIG_USB_GADGET_DOWNLOAD diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 8f11eb9..b5d05cd 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -343,7 +343,6 @@ extern int soft_i2c_gpio_scl; #ifdef CONFIG_USB_MUSB_GADGET #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 0 #define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USB_FUNCTION_DFU diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 5b190f6..0b04b3a 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -140,7 +140,6 @@ #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_NAND #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M) #define DFU_MANIFEST_POLL_TIMEOUT 25000 diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 1b5046a..715994c 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -132,7 +132,6 @@ #define CONFIG_USBD_HS #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 0 #define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_G_DNL_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 diff --git a/include/configs/tegra-common-usb-gadget.h b/include/configs/tegra-common-usb-gadget.h index c3a0151..ec034a1 100644 --- a/include/configs/tegra-common-usb-gadget.h +++ b/include/configs/tegra-common-usb-gadget.h @@ -10,7 +10,6 @@ #ifndef CONFIG_SPL_BUILD /* USB gadget mode support*/ -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_CI_UDC #define CONFIG_CI_UDC_HAS_HOSTPC #define CONFIG_USB_GADGET_DUALSPEED diff --git a/include/configs/warp.h b/include/configs/warp.h index cb93629..80c4e38 100644 --- a/include/configs/warp.h +++ b/include/configs/warp.h @@ -81,7 +81,6 @@ #define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_G_DNL_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 8cea610..3a96483 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -130,7 +130,6 @@ #define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_USBDOWNLOAD_GADGET #define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000 #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index d8e3fa4..941372d 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -107,7 +107,6 @@ # define DFU_DEFAULT_POLL_TIMEOUT 300 # define CONFIG_USB_FUNCTION_DFU # define CONFIG_DFU_RAM -# define CONFIG_USB_GADGET_VBUS_DRAW 2 # define CONFIG_G_DNL_VENDOR_NUM 0x03FD # define CONFIG_G_DNL_PRODUCT_NUM 0x0300 # define CONFIG_G_DNL_MANUFACTURER "Xilinx" -- 2.8.0.rc3

4 4