March 2016 - U-Boot

[U-Boot] [PATCH 1/6] ARM: keystone2: Split monitor code / command code
by Tom Rini 17 Mar '16

17 Mar '16

When we switch to including all linker lists in U-Boot it is important to not include commands as that may lead to link errors due to other things we have already discarded. In this case, we split the code for supporting the monitor out from the code for loading it. Cc: Vitaly Andrianov <vitalya(a)ti.com> Cc: Nishanth Menon <nm(a)ti.com> Cc: Lokesh Vutla <lokeshvutla(a)ti.com> Signed-off-by: Tom Rini <trini(a)konsulko.com> --- arch/arm/mach-keystone/Makefile | 3 ++ arch/arm/mach-keystone/cmd_mon.c | 51 +---------------------- arch/arm/mach-keystone/include/mach/mon.h | 6 ++- arch/arm/mach-keystone/mon.c | 63 +++++++++++++++++++++++++++++ 4 files changed, 71 insertions(+), 52 deletions(-) create mode 100644 arch/arm/mach-keystone/mon.c diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile index 9713fe4..7f12009 100644 --- a/arch/arm/mach-keystone/Makefile +++ b/arch/arm/mach-keystone/Makefile @@ -8,8 +8,11 @@ obj-y += init.o obj-y += psc.o obj-y += clock.o +obj-y += mon.o +ifndef CONFIG_SPL_BUILD obj-y += cmd_clock.o obj-y += cmd_mon.o +endif obj-y += msmc.o obj-y += ddr3.o cmd_ddr3.o obj-y += keystone.o diff --git a/arch/arm/mach-keystone/cmd_mon.c b/arch/arm/mach-keystone/cmd_mon.c index a539d5d..6a9bdc9 100644 --- a/arch/arm/mach-keystone/cmd_mon.c +++ b/arch/arm/mach-keystone/cmd_mon.c @@ -9,25 +9,9 @@ #include <common.h> #include <command.h> +#include <mach/mon.h> asm(".arch_extension sec\n\t"); -static int mon_install(u32 addr, u32 dpsc, u32 freq) -{ - int result; - - __asm__ __volatile__ ( - "stmfd r13!, {lr}\n" - "mov r0, %1\n" - "mov r1, %2\n" - "mov r2, %3\n" - "blx r0\n" - "ldmfd r13!, {lr}\n" - : "=&r" (result) - : "r" (addr), "r" (dpsc), "r" (freq) - : "cc", "r0", "r1", "r2", "memory"); - return result; -} - static int do_mon_install(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { @@ -64,39 +48,6 @@ static void core_spin(void) } } -int mon_power_on(int core_id, void *ep) -{ - int result; - - asm volatile ( - "stmfd r13!, {lr}\n" - "mov r1, %1\n" - "mov r2, %2\n" - "mov r0, #0\n" - "smc #0\n" - "ldmfd r13!, {lr}\n" - : "=&r" (result) - : "r" (core_id), "r" (ep) - : "cc", "r0", "r1", "r2", "memory"); - return result; -} - -int mon_power_off(int core_id) -{ - int result; - - asm volatile ( - "stmfd r13!, {lr}\n" - "mov r1, %1\n" - "mov r0, #1\n" - "smc #1\n" - "ldmfd r13!, {lr}\n" - : "=&r" (result) - : "r" (core_id) - : "cc", "r0", "r1", "memory"); - return result; -} - int do_mon_power(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { diff --git a/arch/arm/mach-keystone/include/mach/mon.h b/arch/arm/mach-keystone/include/mach/mon.h index 33a2876..eb7aa93 100644 --- a/arch/arm/mach-keystone/include/mach/mon.h +++ b/arch/arm/mach-keystone/include/mach/mon.h @@ -7,9 +7,11 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef _MON_H_ -#define _MON_H_ +#ifndef _MACH_MON_H_ +#define _MACH_MON_H_ +int mon_install(u32 addr, u32 dpsc, u32 freq); +int mon_power_on(int core_id, void *ep); int mon_power_off(int core_id); #endif diff --git a/arch/arm/mach-keystone/mon.c b/arch/arm/mach-keystone/mon.c new file mode 100644 index 0000000..256f630 --- /dev/null +++ b/arch/arm/mach-keystone/mon.c @@ -0,0 +1,63 @@ +/* + * K2HK: secure kernel command file + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <mach/mon.h> +asm(".arch_extension sec\n\t"); + +int mon_install(u32 addr, u32 dpsc, u32 freq) +{ + int result; + + __asm__ __volatile__ ( + "stmfd r13!, {lr}\n" + "mov r0, %1\n" + "mov r1, %2\n" + "mov r2, %3\n" + "blx r0\n" + "ldmfd r13!, {lr}\n" + : "=&r" (result) + : "r" (addr), "r" (dpsc), "r" (freq) + : "cc", "r0", "r1", "r2", "memory"); + return result; +} + +int mon_power_on(int core_id, void *ep) +{ + int result; + + asm volatile ( + "stmfd r13!, {lr}\n" + "mov r1, %1\n" + "mov r2, %2\n" + "mov r0, #0\n" + "smc #0\n" + "ldmfd r13!, {lr}\n" + : "=&r" (result) + : "r" (core_id), "r" (ep) + : "cc", "r0", "r1", "r2", "memory"); + return result; +} + +int mon_power_off(int core_id) +{ + int result; + + asm volatile ( + "stmfd r13!, {lr}\n" + "mov r1, %1\n" + "mov r0, #1\n" + "smc #1\n" + "ldmfd r13!, {lr}\n" + : "=&r" (result) + : "r" (core_id) + : "cc", "r0", "r1", "memory"); + return result; +} -- 1.7.9.5

2 13

[U-Boot] EFI loader support largely enabled
by Tom Rini 17 Mar '16

17 Mar '16

Hey all, What I mean by the subject is that with the EFI loader patches enabled U-Boot itself (not SPL) now includes the EFI loader and required bits on ARM/aarch64. This is in general I think a good thing. I've however disabled it on a few boards due to size constraints. This is an average gain of ~12KiB in U-Boot proper. I fully expect a number of platform patches opting out of this support due to it just not being a real usecase and I am agreeable to talking about making it not enabled by default. So, lets kick things off. -- Tom

1 0

[U-Boot] [PATCH] Fix typo in chosen parameter in vf610-twr.dts.
by Alexander Merkle 17 Mar '16

17 Mar '16

Signed-off-by: Alexander Merkle <alexander.merkle(a)lauterbach.com> --- arch/arm/dts/vf610-twr.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/dts/vf610-twr.dts b/arch/arm/dts/vf610-twr.dts index a4ccbcb..237aa8d 100644 --- a/arch/arm/dts/vf610-twr.dts +++ b/arch/arm/dts/vf610-twr.dts @@ -11,7 +11,7 @@ model = "VF610 Tower Board"; compatible = "fsl,vf610-twr", "fsl,vf610"; - choosen { + chosen { stdout-path = &uart1; }; -- 2.7.0

2 1

[U-Boot] [PATCH] fdt: Try to read #address-cells/size-cells from parent
by Michal Simek 17 Mar '16

17 Mar '16

Read #address-cells and #size-cells from parent if they are not present in current node. Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- I have code which read information about memory for zynqmp but memory node most of the time doesn't contain #address/size-cells which are present in parent node. That's why let's try to read it from parent. Also I think that we shouldn't return 2 if property is not found because it has side effect on 32bit systems with #address/size-cells = <1>; --- lib/libfdt/fdt_addresses.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/lib/libfdt/fdt_addresses.c b/lib/libfdt/fdt_addresses.c index 76054d98e5fd..b164d0988079 100644 --- a/lib/libfdt/fdt_addresses.c +++ b/lib/libfdt/fdt_addresses.c @@ -19,10 +19,15 @@ int fdt_address_cells(const void *fdt, int nodeoffset) const fdt32_t *ac; int val; int len; + int parent; ac = fdt_getprop(fdt, nodeoffset, "#address-cells", &len); - if (!ac) - return 2; + if (!ac) { + parent = fdt_parent_offset(fdt, nodeoffset); + ac = fdt_getprop(fdt, parent, "#address-cells", &len); + if (!ac) + return 2; + } if (len != sizeof(*ac)) return -FDT_ERR_BADNCELLS; @@ -39,10 +44,15 @@ int fdt_size_cells(const void *fdt, int nodeoffset) const fdt32_t *sc; int val; int len; + int parent; sc = fdt_getprop(fdt, nodeoffset, "#size-cells", &len); - if (!sc) - return 2; + if (!sc) { + parent = fdt_parent_offset(fdt, nodeoffset); + sc = fdt_getprop(fdt, parent, "#size-cells", &len); + if (!sc) + return 2; + } if (len != sizeof(*sc)) return -FDT_ERR_BADNCELLS; -- 1.9.1

3 9

[U-Boot] [PATCH 0/5] Enable caches for the RPi2
by Alexander Graf 16 Mar '16

16 Mar '16

This patch set converts the Raspberry Pi 2 system to properly make use of the caches available in it. Because we're running in HYP mode, we first need to teach U-Boot how to make use of HYP registers and the LPAE page layout which is mandated by hardware when running in HYP mode. Then while we're at it, also mark the frame buffer cached to speed up screen updates. With this patch set, my Raspberry Pi 3 running in AArch32 mode is a *lot* faster than without. Please verify that the code works on a RPi2 as well. In theory it should, but I only have a 3 to test on available here. Alexander Graf (5): arm64: Add 32bit arm compatible dcache definitions arm: Add support for HYP mode and LPAE page tables lcd: Fix compile warning in 64bit mode RPi: Enable caches for rpi2 bcm2835 video: Map fb as cached arch/arm/include/asm/system.h | 105 +++++++++++++++++++++++++++++++++++++++--- arch/arm/lib/cache-cp15.c | 66 +++++++++++++++++++++++--- arch/arm/mach-bcm283x/init.c | 7 +++ common/lcd.c | 4 +- drivers/video/bcm2835.c | 6 +++ include/configs/rpi_2.h | 2 +- 6 files changed, 174 insertions(+), 16 deletions(-) -- 1.8.5.6

3 12

[U-Boot] [PATCH 1/2] doc: driver-model: Update dm tests run using test.py
by Jagan Teki 16 Mar '16

16 Mar '16

Since all the tests are implemented in pytest infrastructure, So update the dm tests with the same instead of ./test/dm/test-dm.sh Cc: Tom Rini <trini(a)konsulko.com> Cc: Simon Glass <sjg(a)chromium.org> Cc: Stephen Warren <swarren(a)nvidia.com> Signed-off-by: Jagan Teki <jteki(a)openedev.com> --- doc/driver-model/README.txt | 229 +++++++++++++++++++++++++------------------- 1 file changed, 128 insertions(+), 101 deletions(-) diff --git a/doc/driver-model/README.txt b/doc/driver-model/README.txt index b891e84..3bd8536 100644 --- a/doc/driver-model/README.txt +++ b/doc/driver-model/README.txt @@ -90,110 +90,137 @@ The intent with driver model is that the core portion has 100% test coverage in sandbox, and every uclass has its own test. As a move towards this, tests are provided in test/dm. To run them, try: - ./test/dm/test-dm.sh + ./test/py/test.py --bd sandbox --build -k ut_dm -v You should see something like this: - <...U-Boot banner...> - Running 53 driver model tests - Test: dm_test_autobind - Test: dm_test_autoprobe - Test: dm_test_bus_child_post_bind - Test: dm_test_bus_child_post_bind_uclass - Test: dm_test_bus_child_pre_probe_uclass - Test: dm_test_bus_children - Device 'c-test@0': seq 0 is in use by 'd-test' - Device 'c-test@1': seq 1 is in use by 'f-test' - Test: dm_test_bus_children_funcs - Test: dm_test_bus_children_iterators - Test: dm_test_bus_parent_data - Test: dm_test_bus_parent_data_uclass - Test: dm_test_bus_parent_ops - Test: dm_test_bus_parent_platdata - Test: dm_test_bus_parent_platdata_uclass - Test: dm_test_children - Test: dm_test_device_get_uclass_id - Test: dm_test_eth - Using eth@10002000 device - Using eth@10003000 device - Using eth@10004000 device - Test: dm_test_eth_alias - Using eth@10002000 device - Using eth@10004000 device - Using eth@10002000 device - Using eth@10003000 device - Test: dm_test_eth_prime - Using eth@10003000 device - Using eth@10002000 device - Test: dm_test_eth_rotate - - Error: eth@10004000 address not set. - - Error: eth@10004000 address not set. - Using eth@10002000 device - - Error: eth@10004000 address not set. - - Error: eth@10004000 address not set. - Using eth@10004000 device - Test: dm_test_fdt - Test: dm_test_fdt_offset - Test: dm_test_fdt_pre_reloc - Test: dm_test_fdt_uclass_seq - Test: dm_test_gpio - extra-gpios: get_value: error: gpio b5 not reserved - Test: dm_test_gpio_anon - Test: dm_test_gpio_copy - Test: dm_test_gpio_leak - extra-gpios: get_value: error: gpio b5 not reserved - Test: dm_test_gpio_phandles - Test: dm_test_gpio_requestf - Test: dm_test_i2c_bytewise - Test: dm_test_i2c_find - Test: dm_test_i2c_offset - Test: dm_test_i2c_offset_len - Test: dm_test_i2c_probe_empty - Test: dm_test_i2c_read_write - Test: dm_test_i2c_speed - Test: dm_test_leak - Test: dm_test_lifecycle - Test: dm_test_net_retry - Using eth@10004000 device - Using eth@10002000 device - Using eth@10004000 device - Test: dm_test_operations - Test: dm_test_ordering - Test: dm_test_pci_base - Test: dm_test_pci_swapcase - Test: dm_test_platdata - Test: dm_test_pre_reloc - Test: dm_test_remove - Test: dm_test_spi_find - Invalid chip select 0:0 (err=-19) - SF: Failed to get idcodes - SF: Detected M25P16 with page size 256 Bytes, erase size 64 KiB, total 2 MiB - Test: dm_test_spi_flash - 2097152 bytes written in 0 ms - SF: Detected M25P16 with page size 256 Bytes, erase size 64 KiB, total 2 MiB - SPI flash test: - 0 erase: 0 ticks, 65536000 KiB/s 524288.000 Mbps - 1 check: 0 ticks, 65536000 KiB/s 524288.000 Mbps - 2 write: 0 ticks, 65536000 KiB/s 524288.000 Mbps - 3 read: 0 ticks, 65536000 KiB/s 524288.000 Mbps - Test passed - 0 erase: 0 ticks, 65536000 KiB/s 524288.000 Mbps - 1 check: 0 ticks, 65536000 KiB/s 524288.000 Mbps - 2 write: 0 ticks, 65536000 KiB/s 524288.000 Mbps - 3 read: 0 ticks, 65536000 KiB/s 524288.000 Mbps - Test: dm_test_spi_xfer - SF: Detected M25P16 with page size 256 Bytes, erase size 64 KiB, total 2 MiB - Test: dm_test_uclass - Test: dm_test_uclass_before_ready - Test: dm_test_usb_base - Test: dm_test_usb_flash - USB-1: scanning bus 1 for devices... 2 USB Device(s) found - Failures: 0 - +(venv)$ ./test/py/test.py --bd sandbox --build -k ut_dm -v ++make O=/root/u-boot/build-sandbox -s sandbox_defconfig ++make O=/root/u-boot/build-sandbox -s -j8 +======================================================================================== test session starts ======================================================================================== +platform linux2 -- Python 2.7.5, pytest-2.9.0, py-1.4.31, pluggy-0.3.1 -- /root/u-boot/venv/bin/python +cachedir: .cache +rootdir: /root/u-boot, inifile: +collected 199 items + +test/py/tests/test_ut.py::test_ut_dm_init PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_adc_bind] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_adc_multi_channel_conversion] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_adc_multi_channel_shot] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_adc_single_channel_conversion] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_adc_single_channel_shot] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_adc_supply] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_adc_wrong_channel_selection] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_autobind] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_autobind_uclass_pdata_alloc] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_autobind_uclass_pdata_valid] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_autoprobe] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_bus_child_post_bind] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_bus_child_post_bind_uclass] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_bus_child_pre_probe_uclass] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_bus_children] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_bus_children_funcs] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_bus_children_iterators] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_bus_parent_data] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_bus_parent_data_uclass] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_bus_parent_ops] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_bus_parent_platdata] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_bus_parent_platdata_uclass] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_children] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_clk_base] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_clk_periph] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_device_get_uclass_id] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_eth] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_eth_act] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_eth_alias] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_eth_prime] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_eth_rotate] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_fdt] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_fdt_offset] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_fdt_pre_reloc] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_fdt_uclass_seq] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_gpio] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_gpio_anon] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_gpio_copy] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_gpio_leak] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_gpio_phandles] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_gpio_requestf] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_i2c_bytewise] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_i2c_find] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_i2c_offset] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_i2c_offset_len] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_i2c_probe_empty] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_i2c_read_write] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_i2c_speed] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_leak] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_led_base] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_led_gpio] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_led_label] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_lifecycle] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_mmc_base] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_net_retry] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_operations] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_ordering] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_pci_base] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_pci_busnum] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_pci_swapcase] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_platdata] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_power_pmic_get] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_power_pmic_io] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_autoset] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_autoset_list] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_get] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_set_get_current] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_set_get_enable] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_set_get_mode] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_set_get_voltage] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_pre_reloc] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_ram_base] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_regmap_base] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_regmap_syscon] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_remoteproc_base] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_remove] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_reset_base] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_reset_walk] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_rtc_base] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_rtc_dual] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_rtc_reset] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_rtc_set_get] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_spi_find] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_spi_flash] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_spi_xfer] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_syscon_base] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_syscon_by_driver_data] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_timer_base] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_uclass] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_uclass_before_ready] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_uclass_devices_find] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_uclass_devices_find_by_name] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_uclass_devices_get] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_uclass_devices_get_by_name] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_usb_base] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_usb_flash] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_usb_keyb] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_usb_multi] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_usb_remove] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_usb_tree] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_usb_tree_remove] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_usb_tree_reorder] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_video_base] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_video_bmp] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_video_bmp_comp] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_video_chars] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_video_context] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_video_rotation1] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_video_rotation2] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_video_rotation3] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_video_text] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_video_truetype] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_video_truetype_bs] PASSED +test/py/tests/test_ut.py::test_ut[ut_dm_video_truetype_scroll] PASSED + +================================================================================= 84 tests deselected by '-kut_dm' ================================================================================== +============================================================================= 115 passed, 84 deselected in 4.95 seconds ============================================================================= What is going on? ----------------- -- 1.9.1

2 2

[U-Boot] [PATCH v8 0/9] add support for atheros ath79 based SOCs
by Wills Wang 16 Mar '16

16 Mar '16

These series of patch add support for atheros ath79 based SOCs in u-boot, at the present moment it's just available for ar933x and qca953x chip. Changes in v8: - Use setbits_be32 - Use lookup-table instead of big switch statement for CPU detection - Fix multi-line comment for ar933x - Fix multi-line comment for qca953x - Remove ath79_serial_write/read - Use pinctrl for serial - Add Kconfig dependence for serial option - Remove ath79_spi_write/read - Use pinctrl for spi - Add Kconfig dependence for spi option - Use dev_get_parent - Move board/ath79/ap121 into board/qca/ap121 - Move SYS_VENDOR into board-level for ap121 - Move board/ath79/ap143 into board/qca/ap143 - Move SYS_VENDOR into board-level for ap143 Changes in v7: - Use setbits_32 - Fix include path for SoC specific headers - Use CKSEGxADDR instead of KSEGxADDR for ar933x - Use CKSEGxADDR instead of KSEGxADDR for qca953x - remove map_physmem for debug port - Define spi_cs_activate/spi_cs_deactivate - Rename MHZ to ATH79_SPI_MHZ - Use clrsetbits_32 - Use KSEG1 address for debug port in ap121 - Use KSEG1 address for debug port in ap143 Changes in v6: - Move ar933x as separate patch - Add get_bootstrap in reset.c - Use map_physmem instead of KSEG1ADDR - Add arch_cpu_init for detect SOC type for early - Remove board.c - Define magic value in ddr.c - Initial support for qca953x - Remove wait loop in putc and getc - Use map_physmem instead of KSEG1ADDR - Add rrw_delay in ath79_spi_priv for more accurate timing - Remove ath79_spi_delay - Calculate delay in ath79_spi_set_speed - Convert SZ_XXX into hex in ap121.h - Remove useless CONFIG_SYS_INIT_SP_OFFSET in ap121.h - Add board_early_init_f for DDR and pin initialization - Select UART and SPI in ap121_defconfig Changes in v5: - Add independent Kconfig - Use SRAM for initial stack - Move DDR initialization into board_early_init_f - Convert DDR tap tunning code to C - Save SOC's version into arch_global_data - Add ddr.c for ar933x - remove ar933x_serial_platdata - Import document "qca,ar9330-uart.txt" from kernel - Add support for debug UART - remove ar933x_spi_platdata - Import document "spi-ath79.txt" from kernel - Add delay for bitbang operation - Move CONFIG_SYS_TEXT_BASE into ap121.h, and remove config.mk - Remove useless README file - Remove useless checkboard function Changes in v4: - Use global_data to save CPU/DDR/AHB clock - Use arch_global_data to save SOC's type, revison and id - Add clk.c for ar933x - Auto calculate baudrate for serial driver - Move pinctrl code in serial driver into arch/mips/mach-ath79 - Use get_serial_clock to serial clock source - Use get_bus_freq instead of hardcode in SPI driver Changes in v3: - Move SoC specific header files into arch/mips/mach-ath79/include/mach - Optimize assembly code - Same code style convertion - Convert serial driver to driver model - Convert spi driver to driver model - Add support for device tree Changes in v2: - Move all SoC specific header files into arch/mips/include/asm/arch-ath79 - Check SOC type and extract common code into arch/mips/mach-ath79 - Move serial driver code into drivers/serial - Add a compatible spi driver - Add a reference board implemention Wills Wang (9): mips: add base support for QCA/Atheros ath79 SOCs mips: ath79: add support for AR933x SOCs mips: ath79: add support for QCA953x SOCs drivers: pinctrl: Add simple pinctrl driver for QCA/Athores ar933x. drivers: pinctrl: Add simple pinctrl driver for QCA/Athores qca953x. drivers: serial: add serial driver for ar933x SOC drivers: spi: add spi support for QCA/Atheros ath79 SOCs mips: ath79: add AP121 reference board mips: ath79: add AP143 reference board arch/mips/Kconfig | 6 + arch/mips/Makefile | 1 + arch/mips/dts/Makefile | 2 + arch/mips/dts/ap121.dts | 43 + arch/mips/dts/ap143.dts | 43 + arch/mips/dts/ar933x.dtsi | 82 ++ arch/mips/dts/qca953x.dtsi | 84 ++ arch/mips/include/asm/global_data.h | 6 + arch/mips/mach-ath79/Kconfig | 41 + arch/mips/mach-ath79/Makefile | 10 + arch/mips/mach-ath79/ar933x/Makefile | 7 + arch/mips/mach-ath79/ar933x/clk.c | 89 ++ arch/mips/mach-ath79/ar933x/ddr.c | 333 ++++++ arch/mips/mach-ath79/ar933x/lowlevel_init.S | 280 +++++ arch/mips/mach-ath79/cpu.c | 142 +++ arch/mips/mach-ath79/dram.c | 16 + arch/mips/mach-ath79/include/mach/ar71xx_regs.h | 1184 ++++++++++++++++++++ arch/mips/mach-ath79/include/mach/ath79.h | 143 +++ arch/mips/mach-ath79/include/mach/ddr.h | 13 + arch/mips/mach-ath79/include/mach/reset.h | 14 + arch/mips/mach-ath79/qca953x/Makefile | 7 + arch/mips/mach-ath79/qca953x/clk.c | 111 ++ arch/mips/mach-ath79/qca953x/ddr.c | 472 ++++++++ arch/mips/mach-ath79/qca953x/lowlevel_init.S | 186 +++ arch/mips/mach-ath79/reset.c | 71 ++ board/qca/ap121/Kconfig | 12 + board/qca/ap121/MAINTAINERS | 6 + board/qca/ap121/Makefile | 5 + board/qca/ap121/ap121.c | 50 + board/qca/ap143/Kconfig | 12 + board/qca/ap143/MAINTAINERS | 6 + board/qca/ap143/Makefile | 5 + board/qca/ap143/ap143.c | 66 ++ configs/ap121_defconfig | 46 + configs/ap143_defconfig | 45 + .../serial/qca,ar9330-uart.txt | 24 + doc/device-tree-bindings/spi/spi-ath79.txt | 19 + drivers/pinctrl/Kconfig | 18 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/ath79/Makefile | 6 + drivers/pinctrl/ath79/pinctrl_ar933x.c | 136 +++ drivers/pinctrl/ath79/pinctrl_qca953x.c | 156 +++ drivers/serial/Kconfig | 18 + drivers/serial/Makefile | 1 + drivers/serial/serial_ar933x.c | 255 +++++ drivers/spi/Kconfig | 9 + drivers/spi/Makefile | 1 + drivers/spi/ath79_spi.c | 240 ++++ include/configs/ap121.h | 87 ++ include/configs/ap143.h | 91 ++ 50 files changed, 4701 insertions(+) create mode 100644 arch/mips/dts/ap121.dts create mode 100644 arch/mips/dts/ap143.dts create mode 100644 arch/mips/dts/ar933x.dtsi create mode 100644 arch/mips/dts/qca953x.dtsi create mode 100644 arch/mips/mach-ath79/Kconfig create mode 100644 arch/mips/mach-ath79/Makefile create mode 100644 arch/mips/mach-ath79/ar933x/Makefile create mode 100644 arch/mips/mach-ath79/ar933x/clk.c create mode 100644 arch/mips/mach-ath79/ar933x/ddr.c create mode 100644 arch/mips/mach-ath79/ar933x/lowlevel_init.S create mode 100644 arch/mips/mach-ath79/cpu.c create mode 100644 arch/mips/mach-ath79/dram.c create mode 100644 arch/mips/mach-ath79/include/mach/ar71xx_regs.h create mode 100644 arch/mips/mach-ath79/include/mach/ath79.h create mode 100644 arch/mips/mach-ath79/include/mach/ddr.h create mode 100644 arch/mips/mach-ath79/include/mach/reset.h create mode 100644 arch/mips/mach-ath79/qca953x/Makefile create mode 100644 arch/mips/mach-ath79/qca953x/clk.c create mode 100644 arch/mips/mach-ath79/qca953x/ddr.c create mode 100644 arch/mips/mach-ath79/qca953x/lowlevel_init.S create mode 100644 arch/mips/mach-ath79/reset.c create mode 100644 board/qca/ap121/Kconfig create mode 100644 board/qca/ap121/MAINTAINERS create mode 100644 board/qca/ap121/Makefile create mode 100644 board/qca/ap121/ap121.c create mode 100644 board/qca/ap143/Kconfig create mode 100644 board/qca/ap143/MAINTAINERS create mode 100644 board/qca/ap143/Makefile create mode 100644 board/qca/ap143/ap143.c create mode 100644 configs/ap121_defconfig create mode 100644 configs/ap143_defconfig create mode 100644 doc/device-tree-bindings/serial/qca,ar9330-uart.txt create mode 100644 doc/device-tree-bindings/spi/spi-ath79.txt create mode 100644 drivers/pinctrl/ath79/Makefile create mode 100644 drivers/pinctrl/ath79/pinctrl_ar933x.c create mode 100644 drivers/pinctrl/ath79/pinctrl_qca953x.c create mode 100644 drivers/serial/serial_ar933x.c create mode 100644 drivers/spi/ath79_spi.c create mode 100644 include/configs/ap121.h create mode 100644 include/configs/ap143.h -- 1.9.1

2 1

[U-Boot] [PATCH] include/dt-bindings: Sync some files with the kernel
by Hans de Goede 16 Mar '16

16 Mar '16

This commit syncs the dt-bindings/input/* headers with the kernel (v4.5) and adds dt-bindings/clock/sun4i-a10-pll2.h, both are necessary for newer sunxi dts files to build. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- include/dt-bindings/clock/sun4i-a10-pll2.h | 53 +++ include/dt-bindings/input/input.h | 510 +-------------------- .../input/{input.h => linux-event-codes.h} | 304 +++++++++++- 3 files changed, 346 insertions(+), 521 deletions(-) create mode 100644 include/dt-bindings/clock/sun4i-a10-pll2.h copy include/dt-bindings/input/{input.h => linux-event-codes.h} (61%) diff --git a/include/dt-bindings/clock/sun4i-a10-pll2.h b/include/dt-bindings/clock/sun4i-a10-pll2.h new file mode 100644 index 0000000..071c811 --- /dev/null +++ b/include/dt-bindings/clock/sun4i-a10-pll2.h @@ -0,0 +1,53 @@ +/* + * Copyright 2015 Maxime Ripard + * + * Maxime Ripard <maxime.ripard(a)free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_ +#define __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_ + +#define SUN4I_A10_PLL2_1X 0 +#define SUN4I_A10_PLL2_2X 1 +#define SUN4I_A10_PLL2_4X 2 +#define SUN4I_A10_PLL2_8X 3 + +#endif /* __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_ */ diff --git a/include/dt-bindings/input/input.h b/include/dt-bindings/input/input.h index 042e7b3..a214133 100644 --- a/include/dt-bindings/input/input.h +++ b/include/dt-bindings/input/input.h @@ -9,515 +9,7 @@ #ifndef _DT_BINDINGS_INPUT_INPUT_H #define _DT_BINDINGS_INPUT_INPUT_H -#define KEY_RESERVED 0 -#define KEY_ESC 1 -#define KEY_1 2 -#define KEY_2 3 -#define KEY_3 4 -#define KEY_4 5 -#define KEY_5 6 -#define KEY_6 7 -#define KEY_7 8 -#define KEY_8 9 -#define KEY_9 10 -#define KEY_0 11 -#define KEY_MINUS 12 -#define KEY_EQUAL 13 -#define KEY_BACKSPACE 14 -#define KEY_TAB 15 -#define KEY_Q 16 -#define KEY_W 17 -#define KEY_E 18 -#define KEY_R 19 -#define KEY_T 20 -#define KEY_Y 21 -#define KEY_U 22 -#define KEY_I 23 -#define KEY_O 24 -#define KEY_P 25 -#define KEY_LEFTBRACE 26 -#define KEY_RIGHTBRACE 27 -#define KEY_ENTER 28 -#define KEY_LEFTCTRL 29 -#define KEY_A 30 -#define KEY_S 31 -#define KEY_D 32 -#define KEY_F 33 -#define KEY_G 34 -#define KEY_H 35 -#define KEY_J 36 -#define KEY_K 37 -#define KEY_L 38 -#define KEY_SEMICOLON 39 -#define KEY_APOSTROPHE 40 -#define KEY_GRAVE 41 -#define KEY_LEFTSHIFT 42 -#define KEY_BACKSLASH 43 -#define KEY_Z 44 -#define KEY_X 45 -#define KEY_C 46 -#define KEY_V 47 -#define KEY_B 48 -#define KEY_N 49 -#define KEY_M 50 -#define KEY_COMMA 51 -#define KEY_DOT 52 -#define KEY_SLASH 53 -#define KEY_RIGHTSHIFT 54 -#define KEY_KPASTERISK 55 -#define KEY_LEFTALT 56 -#define KEY_SPACE 57 -#define KEY_CAPSLOCK 58 -#define KEY_F1 59 -#define KEY_F2 60 -#define KEY_F3 61 -#define KEY_F4 62 -#define KEY_F5 63 -#define KEY_F6 64 -#define KEY_F7 65 -#define KEY_F8 66 -#define KEY_F9 67 -#define KEY_F10 68 -#define KEY_NUMLOCK 69 -#define KEY_SCROLLLOCK 70 -#define KEY_KP7 71 -#define KEY_KP8 72 -#define KEY_KP9 73 -#define KEY_KPMINUS 74 -#define KEY_KP4 75 -#define KEY_KP5 76 -#define KEY_KP6 77 -#define KEY_KPPLUS 78 -#define KEY_KP1 79 -#define KEY_KP2 80 -#define KEY_KP3 81 -#define KEY_KP0 82 -#define KEY_KPDOT 83 - -#define KEY_ZENKAKUHANKAKU 85 -#define KEY_102ND 86 -#define KEY_F11 87 -#define KEY_F12 88 -#define KEY_RO 89 -#define KEY_KATAKANA 90 -#define KEY_HIRAGANA 91 -#define KEY_HENKAN 92 -#define KEY_KATAKANAHIRAGANA 93 -#define KEY_MUHENKAN 94 -#define KEY_KPJPCOMMA 95 -#define KEY_KPENTER 96 -#define KEY_RIGHTCTRL 97 -#define KEY_KPSLASH 98 -#define KEY_SYSRQ 99 -#define KEY_RIGHTALT 100 -#define KEY_LINEFEED 101 -#define KEY_HOME 102 -#define KEY_UP 103 -#define KEY_PAGEUP 104 -#define KEY_LEFT 105 -#define KEY_RIGHT 106 -#define KEY_END 107 -#define KEY_DOWN 108 -#define KEY_PAGEDOWN 109 -#define KEY_INSERT 110 -#define KEY_DELETE 111 -#define KEY_MACRO 112 -#define KEY_MUTE 113 -#define KEY_VOLUMEDOWN 114 -#define KEY_VOLUMEUP 115 -#define KEY_POWER 116 /* SC System Power Down */ -#define KEY_KPEQUAL 117 -#define KEY_KPPLUSMINUS 118 -#define KEY_PAUSE 119 -#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */ - -#define KEY_KPCOMMA 121 -#define KEY_HANGEUL 122 -#define KEY_HANGUEL KEY_HANGEUL -#define KEY_HANJA 123 -#define KEY_YEN 124 -#define KEY_LEFTMETA 125 -#define KEY_RIGHTMETA 126 -#define KEY_COMPOSE 127 - -#define KEY_STOP 128 /* AC Stop */ -#define KEY_AGAIN 129 -#define KEY_PROPS 130 /* AC Properties */ -#define KEY_UNDO 131 /* AC Undo */ -#define KEY_FRONT 132 -#define KEY_COPY 133 /* AC Copy */ -#define KEY_OPEN 134 /* AC Open */ -#define KEY_PASTE 135 /* AC Paste */ -#define KEY_FIND 136 /* AC Search */ -#define KEY_CUT 137 /* AC Cut */ -#define KEY_HELP 138 /* AL Integrated Help Center */ -#define KEY_MENU 139 /* Menu (show menu) */ -#define KEY_CALC 140 /* AL Calculator */ -#define KEY_SETUP 141 -#define KEY_SLEEP 142 /* SC System Sleep */ -#define KEY_WAKEUP 143 /* System Wake Up */ -#define KEY_FILE 144 /* AL Local Machine Browser */ -#define KEY_SENDFILE 145 -#define KEY_DELETEFILE 146 -#define KEY_XFER 147 -#define KEY_PROG1 148 -#define KEY_PROG2 149 -#define KEY_WWW 150 /* AL Internet Browser */ -#define KEY_MSDOS 151 -#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */ -#define KEY_SCREENLOCK KEY_COFFEE -#define KEY_DIRECTION 153 -#define KEY_CYCLEWINDOWS 154 -#define KEY_MAIL 155 -#define KEY_BOOKMARKS 156 /* AC Bookmarks */ -#define KEY_COMPUTER 157 -#define KEY_BACK 158 /* AC Back */ -#define KEY_FORWARD 159 /* AC Forward */ -#define KEY_CLOSECD 160 -#define KEY_EJECTCD 161 -#define KEY_EJECTCLOSECD 162 -#define KEY_NEXTSONG 163 -#define KEY_PLAYPAUSE 164 -#define KEY_PREVIOUSSONG 165 -#define KEY_STOPCD 166 -#define KEY_RECORD 167 -#define KEY_REWIND 168 -#define KEY_PHONE 169 /* Media Select Telephone */ -#define KEY_ISO 170 -#define KEY_CONFIG 171 /* AL Consumer Control Configuration */ -#define KEY_HOMEPAGE 172 /* AC Home */ -#define KEY_REFRESH 173 /* AC Refresh */ -#define KEY_EXIT 174 /* AC Exit */ -#define KEY_MOVE 175 -#define KEY_EDIT 176 -#define KEY_SCROLLUP 177 -#define KEY_SCROLLDOWN 178 -#define KEY_KPLEFTPAREN 179 -#define KEY_KPRIGHTPAREN 180 -#define KEY_NEW 181 /* AC New */ -#define KEY_REDO 182 /* AC Redo/Repeat */ - -#define KEY_F13 183 -#define KEY_F14 184 -#define KEY_F15 185 -#define KEY_F16 186 -#define KEY_F17 187 -#define KEY_F18 188 -#define KEY_F19 189 -#define KEY_F20 190 -#define KEY_F21 191 -#define KEY_F22 192 -#define KEY_F23 193 -#define KEY_F24 194 - -#define KEY_PLAYCD 200 -#define KEY_PAUSECD 201 -#define KEY_PROG3 202 -#define KEY_PROG4 203 -#define KEY_DASHBOARD 204 /* AL Dashboard */ -#define KEY_SUSPEND 205 -#define KEY_CLOSE 206 /* AC Close */ -#define KEY_PLAY 207 -#define KEY_FASTFORWARD 208 -#define KEY_BASSBOOST 209 -#define KEY_PRINT 210 /* AC Print */ -#define KEY_HP 211 -#define KEY_CAMERA 212 -#define KEY_SOUND 213 -#define KEY_QUESTION 214 -#define KEY_EMAIL 215 -#define KEY_CHAT 216 -#define KEY_SEARCH 217 -#define KEY_CONNECT 218 -#define KEY_FINANCE 219 /* AL Checkbook/Finance */ -#define KEY_SPORT 220 -#define KEY_SHOP 221 -#define KEY_ALTERASE 222 -#define KEY_CANCEL 223 /* AC Cancel */ -#define KEY_BRIGHTNESSDOWN 224 -#define KEY_BRIGHTNESSUP 225 -#define KEY_MEDIA 226 - -#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video - outputs (Monitor/LCD/TV-out/etc) */ -#define KEY_KBDILLUMTOGGLE 228 -#define KEY_KBDILLUMDOWN 229 -#define KEY_KBDILLUMUP 230 - -#define KEY_SEND 231 /* AC Send */ -#define KEY_REPLY 232 /* AC Reply */ -#define KEY_FORWARDMAIL 233 /* AC Forward Msg */ -#define KEY_SAVE 234 /* AC Save */ -#define KEY_DOCUMENTS 235 - -#define KEY_BATTERY 236 - -#define KEY_BLUETOOTH 237 -#define KEY_WLAN 238 -#define KEY_UWB 239 - -#define KEY_UNKNOWN 240 - -#define KEY_VIDEO_NEXT 241 /* drive next video source */ -#define KEY_VIDEO_PREV 242 /* drive previous video source */ -#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */ -#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */ -#define KEY_DISPLAY_OFF 245 /* display device to off state */ - -#define KEY_WIMAX 246 -#define KEY_RFKILL 247 /* Key that controls all radios */ - -#define KEY_MICMUTE 248 /* Mute / unmute the microphone */ - -/* Code 255 is reserved for special needs of AT keyboard driver */ - -#define BTN_MISC 0x100 -#define BTN_0 0x100 -#define BTN_1 0x101 -#define BTN_2 0x102 -#define BTN_3 0x103 -#define BTN_4 0x104 -#define BTN_5 0x105 -#define BTN_6 0x106 -#define BTN_7 0x107 -#define BTN_8 0x108 -#define BTN_9 0x109 - -#define BTN_MOUSE 0x110 -#define BTN_LEFT 0x110 -#define BTN_RIGHT 0x111 -#define BTN_MIDDLE 0x112 -#define BTN_SIDE 0x113 -#define BTN_EXTRA 0x114 -#define BTN_FORWARD 0x115 -#define BTN_BACK 0x116 -#define BTN_TASK 0x117 - -#define BTN_JOYSTICK 0x120 -#define BTN_TRIGGER 0x120 -#define BTN_THUMB 0x121 -#define BTN_THUMB2 0x122 -#define BTN_TOP 0x123 -#define BTN_TOP2 0x124 -#define BTN_PINKIE 0x125 -#define BTN_BASE 0x126 -#define BTN_BASE2 0x127 -#define BTN_BASE3 0x128 -#define BTN_BASE4 0x129 -#define BTN_BASE5 0x12a -#define BTN_BASE6 0x12b -#define BTN_DEAD 0x12f - -#define BTN_GAMEPAD 0x130 -#define BTN_SOUTH 0x130 -#define BTN_A BTN_SOUTH -#define BTN_EAST 0x131 -#define BTN_B BTN_EAST -#define BTN_C 0x132 -#define BTN_NORTH 0x133 -#define BTN_X BTN_NORTH -#define BTN_WEST 0x134 -#define BTN_Y BTN_WEST -#define BTN_Z 0x135 -#define BTN_TL 0x136 -#define BTN_TR 0x137 -#define BTN_TL2 0x138 -#define BTN_TR2 0x139 -#define BTN_SELECT 0x13a -#define BTN_START 0x13b -#define BTN_MODE 0x13c -#define BTN_THUMBL 0x13d -#define BTN_THUMBR 0x13e - -#define BTN_DIGI 0x140 -#define BTN_TOOL_PEN 0x140 -#define BTN_TOOL_RUBBER 0x141 -#define BTN_TOOL_BRUSH 0x142 -#define BTN_TOOL_PENCIL 0x143 -#define BTN_TOOL_AIRBRUSH 0x144 -#define BTN_TOOL_FINGER 0x145 -#define BTN_TOOL_MOUSE 0x146 -#define BTN_TOOL_LENS 0x147 -#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */ -#define BTN_TOUCH 0x14a -#define BTN_STYLUS 0x14b -#define BTN_STYLUS2 0x14c -#define BTN_TOOL_DOUBLETAP 0x14d -#define BTN_TOOL_TRIPLETAP 0x14e -#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */ - -#define BTN_WHEEL 0x150 -#define BTN_GEAR_DOWN 0x150 -#define BTN_GEAR_UP 0x151 - -#define KEY_OK 0x160 -#define KEY_SELECT 0x161 -#define KEY_GOTO 0x162 -#define KEY_CLEAR 0x163 -#define KEY_POWER2 0x164 -#define KEY_OPTION 0x165 -#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */ -#define KEY_TIME 0x167 -#define KEY_VENDOR 0x168 -#define KEY_ARCHIVE 0x169 -#define KEY_PROGRAM 0x16a /* Media Select Program Guide */ -#define KEY_CHANNEL 0x16b -#define KEY_FAVORITES 0x16c -#define KEY_EPG 0x16d -#define KEY_PVR 0x16e /* Media Select Home */ -#define KEY_MHP 0x16f -#define KEY_LANGUAGE 0x170 -#define KEY_TITLE 0x171 -#define KEY_SUBTITLE 0x172 -#define KEY_ANGLE 0x173 -#define KEY_ZOOM 0x174 -#define KEY_MODE 0x175 -#define KEY_KEYBOARD 0x176 -#define KEY_SCREEN 0x177 -#define KEY_PC 0x178 /* Media Select Computer */ -#define KEY_TV 0x179 /* Media Select TV */ -#define KEY_TV2 0x17a /* Media Select Cable */ -#define KEY_VCR 0x17b /* Media Select VCR */ -#define KEY_VCR2 0x17c /* VCR Plus */ -#define KEY_SAT 0x17d /* Media Select Satellite */ -#define KEY_SAT2 0x17e -#define KEY_CD 0x17f /* Media Select CD */ -#define KEY_TAPE 0x180 /* Media Select Tape */ -#define KEY_RADIO 0x181 -#define KEY_TUNER 0x182 /* Media Select Tuner */ -#define KEY_PLAYER 0x183 -#define KEY_TEXT 0x184 -#define KEY_DVD 0x185 /* Media Select DVD */ -#define KEY_AUX 0x186 -#define KEY_MP3 0x187 -#define KEY_AUDIO 0x188 /* AL Audio Browser */ -#define KEY_VIDEO 0x189 /* AL Movie Browser */ -#define KEY_DIRECTORY 0x18a -#define KEY_LIST 0x18b -#define KEY_MEMO 0x18c /* Media Select Messages */ -#define KEY_CALENDAR 0x18d -#define KEY_RED 0x18e -#define KEY_GREEN 0x18f -#define KEY_YELLOW 0x190 -#define KEY_BLUE 0x191 -#define KEY_CHANNELUP 0x192 /* Channel Increment */ -#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */ -#define KEY_FIRST 0x194 -#define KEY_LAST 0x195 /* Recall Last */ -#define KEY_AB 0x196 -#define KEY_NEXT 0x197 -#define KEY_RESTART 0x198 -#define KEY_SLOW 0x199 -#define KEY_SHUFFLE 0x19a -#define KEY_BREAK 0x19b -#define KEY_PREVIOUS 0x19c -#define KEY_DIGITS 0x19d -#define KEY_TEEN 0x19e -#define KEY_TWEN 0x19f -#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */ -#define KEY_GAMES 0x1a1 /* Media Select Games */ -#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */ -#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */ -#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */ -#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */ -#define KEY_EDITOR 0x1a6 /* AL Text Editor */ -#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */ -#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */ -#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */ -#define KEY_DATABASE 0x1aa /* AL Database App */ -#define KEY_NEWS 0x1ab /* AL Newsreader */ -#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */ -#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */ -#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */ -#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */ -#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */ -#define KEY_LOGOFF 0x1b1 /* AL Logoff */ - -#define KEY_DOLLAR 0x1b2 -#define KEY_EURO 0x1b3 - -#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */ -#define KEY_FRAMEFORWARD 0x1b5 -#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */ -#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */ -#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */ -#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */ -#define KEY_IMAGES 0x1ba /* AL Image Browser */ - -#define KEY_DEL_EOL 0x1c0 -#define KEY_DEL_EOS 0x1c1 -#define KEY_INS_LINE 0x1c2 -#define KEY_DEL_LINE 0x1c3 - -#define KEY_FN 0x1d0 -#define KEY_FN_ESC 0x1d1 -#define KEY_FN_F1 0x1d2 -#define KEY_FN_F2 0x1d3 -#define KEY_FN_F3 0x1d4 -#define KEY_FN_F4 0x1d5 -#define KEY_FN_F5 0x1d6 -#define KEY_FN_F6 0x1d7 -#define KEY_FN_F7 0x1d8 -#define KEY_FN_F8 0x1d9 -#define KEY_FN_F9 0x1da -#define KEY_FN_F10 0x1db -#define KEY_FN_F11 0x1dc -#define KEY_FN_F12 0x1dd -#define KEY_FN_1 0x1de -#define KEY_FN_2 0x1df -#define KEY_FN_D 0x1e0 -#define KEY_FN_E 0x1e1 -#define KEY_FN_F 0x1e2 -#define KEY_FN_S 0x1e3 -#define KEY_FN_B 0x1e4 - -#define KEY_BRL_DOT1 0x1f1 -#define KEY_BRL_DOT2 0x1f2 -#define KEY_BRL_DOT3 0x1f3 -#define KEY_BRL_DOT4 0x1f4 -#define KEY_BRL_DOT5 0x1f5 -#define KEY_BRL_DOT6 0x1f6 -#define KEY_BRL_DOT7 0x1f7 -#define KEY_BRL_DOT8 0x1f8 -#define KEY_BRL_DOT9 0x1f9 -#define KEY_BRL_DOT10 0x1fa - -#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */ -#define KEY_NUMERIC_1 0x201 /* and other keypads */ -#define KEY_NUMERIC_2 0x202 -#define KEY_NUMERIC_3 0x203 -#define KEY_NUMERIC_4 0x204 -#define KEY_NUMERIC_5 0x205 -#define KEY_NUMERIC_6 0x206 -#define KEY_NUMERIC_7 0x207 -#define KEY_NUMERIC_8 0x208 -#define KEY_NUMERIC_9 0x209 -#define KEY_NUMERIC_STAR 0x20a -#define KEY_NUMERIC_POUND 0x20b - -#define KEY_CAMERA_FOCUS 0x210 -#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */ - -#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */ -#define KEY_TOUCHPAD_ON 0x213 -#define KEY_TOUCHPAD_OFF 0x214 - -#define KEY_CAMERA_ZOOMIN 0x215 -#define KEY_CAMERA_ZOOMOUT 0x216 -#define KEY_CAMERA_UP 0x217 -#define KEY_CAMERA_DOWN 0x218 -#define KEY_CAMERA_LEFT 0x219 -#define KEY_CAMERA_RIGHT 0x21a - -#define KEY_ATTENDANT_ON 0x21b -#define KEY_ATTENDANT_OFF 0x21c -#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */ -#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */ - -#define BTN_DPAD_UP 0x220 -#define BTN_DPAD_DOWN 0x221 -#define BTN_DPAD_LEFT 0x222 -#define BTN_DPAD_RIGHT 0x223 +#include "linux-event-codes.h" #define MATRIX_KEY(row, col, code) \ ((((row) & 0xFF) << 24) | (((col) & 0xFF) << 16) | ((code) & 0xFFFF)) diff --git a/include/dt-bindings/input/input.h b/include/dt-bindings/input/linux-event-codes.h similarity index 61% copy from include/dt-bindings/input/input.h copy to include/dt-bindings/input/linux-event-codes.h index 042e7b3..87cf351 100644 --- a/include/dt-bindings/input/input.h +++ b/include/dt-bindings/input/linux-event-codes.h @@ -1,13 +1,75 @@ /* - * This header provides constants for most input bindings. + * Input event codes * - * Most input bindings include key code, matrix key code format. - * In most cases, key code and matrix key code format uses - * the standard values/macro defined in this header. + * *** IMPORTANT *** + * This file is not only included from C-code but also from devicetree source + * files. As such this file MUST only contain comments and defines. + * + * Copyright (c) 1999-2002 Vojtech Pavlik + * Copyright (c) 2015 Hans de Goede <hdegoede(a)redhat.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef _UAPI_INPUT_EVENT_CODES_H +#define _UAPI_INPUT_EVENT_CODES_H + +/* + * Device properties and quirks + */ + +#define INPUT_PROP_POINTER 0x00 /* needs a pointer */ +#define INPUT_PROP_DIRECT 0x01 /* direct input devices */ +#define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */ +#define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */ +#define INPUT_PROP_TOPBUTTONPAD 0x04 /* softbuttons at top of pad */ +#define INPUT_PROP_POINTING_STICK 0x05 /* is a pointing stick */ +#define INPUT_PROP_ACCELEROMETER 0x06 /* has accelerometer */ + +#define INPUT_PROP_MAX 0x1f +#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1) + +/* + * Event types */ -#ifndef _DT_BINDINGS_INPUT_INPUT_H -#define _DT_BINDINGS_INPUT_INPUT_H +#define EV_SYN 0x00 +#define EV_KEY 0x01 +#define EV_REL 0x02 +#define EV_ABS 0x03 +#define EV_MSC 0x04 +#define EV_SW 0x05 +#define EV_LED 0x11 +#define EV_SND 0x12 +#define EV_REP 0x14 +#define EV_FF 0x15 +#define EV_PWR 0x16 +#define EV_FF_STATUS 0x17 +#define EV_MAX 0x1f +#define EV_CNT (EV_MAX+1) + +/* + * Synchronization events. + */ + +#define SYN_REPORT 0 +#define SYN_CONFIG 1 +#define SYN_MT_REPORT 2 +#define SYN_DROPPED 3 +#define SYN_MAX 0xf +#define SYN_CNT (SYN_MAX+1) + +/* + * Keys and buttons + * + * Most of the keys/buttons are modeled after USB HUT 1.12 + * (see http://www.usb.org/developers/hidpage). + * Abbreviations in the comments: + * AC - Application Control + * AL - Application Launch Button + * SC - System Control + */ #define KEY_RESERVED 0 #define KEY_ESC 1 @@ -166,7 +228,8 @@ #define KEY_MSDOS 151 #define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */ #define KEY_SCREENLOCK KEY_COFFEE -#define KEY_DIRECTION 153 +#define KEY_ROTATE_DISPLAY 153 /* Display orientation for e.g. tablets */ +#define KEY_DIRECTION KEY_ROTATE_DISPLAY #define KEY_CYCLEWINDOWS 154 #define KEY_MAIL 155 #define KEY_BOOKMARKS 156 /* AC Bookmarks */ @@ -261,10 +324,14 @@ #define KEY_VIDEO_NEXT 241 /* drive next video source */ #define KEY_VIDEO_PREV 242 /* drive previous video source */ #define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */ -#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */ +#define KEY_BRIGHTNESS_AUTO 244 /* Set Auto Brightness: manual + brightness control is off, + rely on ambient */ +#define KEY_BRIGHTNESS_ZERO KEY_BRIGHTNESS_AUTO #define KEY_DISPLAY_OFF 245 /* display device to off state */ -#define KEY_WIMAX 246 +#define KEY_WWAN 246 /* Wireless WAN (LTE, UMTS, GSM, etc.) */ +#define KEY_WIMAX KEY_WWAN #define KEY_RFKILL 247 /* Key that controls all radios */ #define KEY_MICMUTE 248 /* Mute / unmute the microphone */ @@ -430,6 +497,7 @@ #define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */ #define KEY_MESSENGER 0x1ae /* AL Instant Messaging */ #define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */ +#define KEY_BRIGHTNESS_TOGGLE KEY_DISPLAYTOGGLE #define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */ #define KEY_LOGOFF 0x1b1 /* AL Logoff */ @@ -494,6 +562,10 @@ #define KEY_NUMERIC_9 0x209 #define KEY_NUMERIC_STAR 0x20a #define KEY_NUMERIC_POUND 0x20b +#define KEY_NUMERIC_A 0x20c /* Phone key A - HUT Telephony 0xb9 */ +#define KEY_NUMERIC_B 0x20d +#define KEY_NUMERIC_C 0x20e +#define KEY_NUMERIC_D 0x20f #define KEY_CAMERA_FOCUS 0x210 #define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */ @@ -519,7 +591,215 @@ #define BTN_DPAD_LEFT 0x222 #define BTN_DPAD_RIGHT 0x223 -#define MATRIX_KEY(row, col, code) \ - ((((row) & 0xFF) << 24) | (((col) & 0xFF) << 16) | ((code) & 0xFFFF)) +#define KEY_ALS_TOGGLE 0x230 /* Ambient light sensor */ + +#define KEY_BUTTONCONFIG 0x240 /* AL Button Configuration */ +#define KEY_TASKMANAGER 0x241 /* AL Task/Project Manager */ +#define KEY_JOURNAL 0x242 /* AL Log/Journal/Timecard */ +#define KEY_CONTROLPANEL 0x243 /* AL Control Panel */ +#define KEY_APPSELECT 0x244 /* AL Select Task/Application */ +#define KEY_SCREENSAVER 0x245 /* AL Screen Saver */ +#define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */ + +#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */ +#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */ + +#define KEY_KBDINPUTASSIST_PREV 0x260 +#define KEY_KBDINPUTASSIST_NEXT 0x261 +#define KEY_KBDINPUTASSIST_PREVGROUP 0x262 +#define KEY_KBDINPUTASSIST_NEXTGROUP 0x263 +#define KEY_KBDINPUTASSIST_ACCEPT 0x264 +#define KEY_KBDINPUTASSIST_CANCEL 0x265 + +#define BTN_TRIGGER_HAPPY 0x2c0 +#define BTN_TRIGGER_HAPPY1 0x2c0 +#define BTN_TRIGGER_HAPPY2 0x2c1 +#define BTN_TRIGGER_HAPPY3 0x2c2 +#define BTN_TRIGGER_HAPPY4 0x2c3 +#define BTN_TRIGGER_HAPPY5 0x2c4 +#define BTN_TRIGGER_HAPPY6 0x2c5 +#define BTN_TRIGGER_HAPPY7 0x2c6 +#define BTN_TRIGGER_HAPPY8 0x2c7 +#define BTN_TRIGGER_HAPPY9 0x2c8 +#define BTN_TRIGGER_HAPPY10 0x2c9 +#define BTN_TRIGGER_HAPPY11 0x2ca +#define BTN_TRIGGER_HAPPY12 0x2cb +#define BTN_TRIGGER_HAPPY13 0x2cc +#define BTN_TRIGGER_HAPPY14 0x2cd +#define BTN_TRIGGER_HAPPY15 0x2ce +#define BTN_TRIGGER_HAPPY16 0x2cf +#define BTN_TRIGGER_HAPPY17 0x2d0 +#define BTN_TRIGGER_HAPPY18 0x2d1 +#define BTN_TRIGGER_HAPPY19 0x2d2 +#define BTN_TRIGGER_HAPPY20 0x2d3 +#define BTN_TRIGGER_HAPPY21 0x2d4 +#define BTN_TRIGGER_HAPPY22 0x2d5 +#define BTN_TRIGGER_HAPPY23 0x2d6 +#define BTN_TRIGGER_HAPPY24 0x2d7 +#define BTN_TRIGGER_HAPPY25 0x2d8 +#define BTN_TRIGGER_HAPPY26 0x2d9 +#define BTN_TRIGGER_HAPPY27 0x2da +#define BTN_TRIGGER_HAPPY28 0x2db +#define BTN_TRIGGER_HAPPY29 0x2dc +#define BTN_TRIGGER_HAPPY30 0x2dd +#define BTN_TRIGGER_HAPPY31 0x2de +#define BTN_TRIGGER_HAPPY32 0x2df +#define BTN_TRIGGER_HAPPY33 0x2e0 +#define BTN_TRIGGER_HAPPY34 0x2e1 +#define BTN_TRIGGER_HAPPY35 0x2e2 +#define BTN_TRIGGER_HAPPY36 0x2e3 +#define BTN_TRIGGER_HAPPY37 0x2e4 +#define BTN_TRIGGER_HAPPY38 0x2e5 +#define BTN_TRIGGER_HAPPY39 0x2e6 +#define BTN_TRIGGER_HAPPY40 0x2e7 + +/* We avoid low common keys in module aliases so they don't get huge. */ +#define KEY_MIN_INTERESTING KEY_MUTE +#define KEY_MAX 0x2ff +#define KEY_CNT (KEY_MAX+1) + +/* + * Relative axes + */ + +#define REL_X 0x00 +#define REL_Y 0x01 +#define REL_Z 0x02 +#define REL_RX 0x03 +#define REL_RY 0x04 +#define REL_RZ 0x05 +#define REL_HWHEEL 0x06 +#define REL_DIAL 0x07 +#define REL_WHEEL 0x08 +#define REL_MISC 0x09 +#define REL_MAX 0x0f +#define REL_CNT (REL_MAX+1) + +/* + * Absolute axes + */ + +#define ABS_X 0x00 +#define ABS_Y 0x01 +#define ABS_Z 0x02 +#define ABS_RX 0x03 +#define ABS_RY 0x04 +#define ABS_RZ 0x05 +#define ABS_THROTTLE 0x06 +#define ABS_RUDDER 0x07 +#define ABS_WHEEL 0x08 +#define ABS_GAS 0x09 +#define ABS_BRAKE 0x0a +#define ABS_HAT0X 0x10 +#define ABS_HAT0Y 0x11 +#define ABS_HAT1X 0x12 +#define ABS_HAT1Y 0x13 +#define ABS_HAT2X 0x14 +#define ABS_HAT2Y 0x15 +#define ABS_HAT3X 0x16 +#define ABS_HAT3Y 0x17 +#define ABS_PRESSURE 0x18 +#define ABS_DISTANCE 0x19 +#define ABS_TILT_X 0x1a +#define ABS_TILT_Y 0x1b +#define ABS_TOOL_WIDTH 0x1c + +#define ABS_VOLUME 0x20 + +#define ABS_MISC 0x28 + +#define ABS_MT_SLOT 0x2f /* MT slot being modified */ +#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */ +#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */ +#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */ +#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */ +#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */ +#define ABS_MT_POSITION_X 0x35 /* Center X touch position */ +#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */ +#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ +#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ +#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ +#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */ +#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */ +#define ABS_MT_TOOL_X 0x3c /* Center X tool position */ +#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */ + + +#define ABS_MAX 0x3f +#define ABS_CNT (ABS_MAX+1) + +/* + * Switch events + */ + +#define SW_LID 0x00 /* set = lid shut */ +#define SW_TABLET_MODE 0x01 /* set = tablet mode */ +#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */ +#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any" + set = radio enabled */ +#define SW_RADIO SW_RFKILL_ALL /* deprecated */ +#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */ +#define SW_DOCK 0x05 /* set = plugged into dock */ +#define SW_LINEOUT_INSERT 0x06 /* set = inserted */ +#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */ +#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */ +#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */ +#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */ +#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */ +#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */ +#define SW_LINEIN_INSERT 0x0d /* set = inserted */ +#define SW_MUTE_DEVICE 0x0e /* set = device disabled */ +#define SW_MAX 0x0f +#define SW_CNT (SW_MAX+1) + +/* + * Misc events + */ + +#define MSC_SERIAL 0x00 +#define MSC_PULSELED 0x01 +#define MSC_GESTURE 0x02 +#define MSC_RAW 0x03 +#define MSC_SCAN 0x04 +#define MSC_TIMESTAMP 0x05 +#define MSC_MAX 0x07 +#define MSC_CNT (MSC_MAX+1) + +/* + * LEDs + */ + +#define LED_NUML 0x00 +#define LED_CAPSL 0x01 +#define LED_SCROLLL 0x02 +#define LED_COMPOSE 0x03 +#define LED_KANA 0x04 +#define LED_SLEEP 0x05 +#define LED_SUSPEND 0x06 +#define LED_MUTE 0x07 +#define LED_MISC 0x08 +#define LED_MAIL 0x09 +#define LED_CHARGING 0x0a +#define LED_MAX 0x0f +#define LED_CNT (LED_MAX+1) + +/* + * Autorepeat values + */ + +#define REP_DELAY 0x00 +#define REP_PERIOD 0x01 +#define REP_MAX 0x01 +#define REP_CNT (REP_MAX+1) + +/* + * Sounds + */ + +#define SND_CLICK 0x00 +#define SND_BELL 0x01 +#define SND_TONE 0x02 +#define SND_MAX 0x07 +#define SND_CNT (SND_MAX+1) -#endif /* _DT_BINDINGS_INPUT_INPUT_H */ +#endif -- 2.7.2

3 2

[U-Boot] [PATCH] sunxi: Enable realtek phy support
by Hans de Goede 16 Mar '16

16 Mar '16

Enable building of drivers/net/phy/realtek.c so that realtek phys get properly initialized. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- include/configs/sunxi-common.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 40850e5..7244c5a 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -314,6 +314,7 @@ extern int soft_i2c_gpio_scl; #define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */ #define CONFIG_PHY_ADDR 1 #define CONFIG_MII /* MII PHY management */ +#define CONFIG_PHY_REALTEK #endif #ifdef CONFIG_USB_EHCI_HCD -- 2.7.2

2 1

[U-Boot] [PATCH v2 0/2] ARM: dt: sunxi: Add Itead Ibox support
by codekipper＠gmail.com 16 Mar '16

16 Mar '16

From: Marcus Cooper <codekipper(a)gmail.com> This patch delivers the uboot changes required for the Itead Ibox A20. As there are a few Itead variants out there based on their A10/A20 core module; I have created a common dtsi for all of them. I've also converted the A10 Itead Iteaduino dts to use this common file. BR, CK --- Changes since v1: - removed enabling of codec as it's not needed and the dtsi doesn't include it --- Marcus Cooper (2): sun7i: Add support for the Itead Ibox sun4i: Convert Iteadunio plus dts arch/arm/dts/Makefile | 1 + arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts | 86 +-------------- arch/arm/dts/sun7i-a20-itead-ibox.dts | 121 +++++++++++++++++++++ arch/arm/dts/sunxi-itead-core-common.dtsi | 136 ++++++++++++++++++++++++ board/sunxi/MAINTAINERS | 5 + configs/Itead_Ibox_A20_defconfig | 16 +++ 6 files changed, 281 insertions(+), 84 deletions(-) create mode 100644 arch/arm/dts/sun7i-a20-itead-ibox.dts create mode 100644 arch/arm/dts/sunxi-itead-core-common.dtsi create mode 100644 configs/Itead_Ibox_A20_defconfig -- 2.7.3

2 3