November 2016 - U-Boot

[U-Boot] [PATCH 0/7] sunxi: Add support for the CHIP Pro
by Maxime Ripard 17 Nov '16

17 Nov '16

The CHIP Pro is a SoM made by NextThing Co, and that embeds a GR8 SIP, an AXP209 PMIC, a WiFi BT chip and a 512MB SLC NAND. Since the first Allwinner device coming whit an SLC NAND that doesn't have the shortcomings (and breakages) the MLC NAND has, we can finally enable the NAND support on a board by default. This is the occasion to introduce a bunch of additions needed imo to be able to come up with a sane NAND support for our users. The biggest pain point is that the BROM uses a different ECC and randomizer configuration than for the rest of the NAND. In order to lessen the number of bitflips, you also need to pad with random data the SPL image. Since it's quite tedious to do right (and most users won't be able to figure it out) and since if it is not done right, it will eventually turn into an unusable system (which is bad UX), we think that the best solution is to generate an SPL image that already embeds all this. We'll possible have to do the same thing for the U-Boot image (at least for the random padding) on MLC NANDs. The only drawback from that is that you need to flash it raw, instead of using the usual nand write, but it's just a different command, nothing major anyway. In order to flash it, from a device switched in FEL, on your host: sunxi-fel spl spl/sunxi-spl.bin sunxi-fel write 0x4a000000 u-boot-dtb.bin sunxi-fel write 0x43000000 spl/sunxi-spl-with-ecc.bin sunxi-fel exe 0x4a000000 And on the board, once u-boot is running (assuming the NAND is already erased): nand write.raw.noverify 0x43000000 0 40 nand write.raw.noverify 0x43000000 0x400000 40 nand write 0x4a000000 0x800000 0xc0000 I also encountered some weird bug in the private libgcc that prevents U-Boot from loading. Disabling CONFIG_USE_PRIVATE_LIBGCC fixes that. Let me know what you think, Maxime Boris Brezillon (1): mtd: nand: add support for the TC58NVG2S0H chip Hans de Goede (1): sunxi: Enable UBI and NAND support Maxime Ripard (5): sunxi: Sync GR8 DTS and AXP209 with the kernel tools: sunxi: Add spl image builder nand: sunxi: Add options for the SPL NAND configuration scripts: sunxi: Build an raw SPL image sunxi: Add support for the CHIP Pro Makefile | 3 +- arch/arm/dts/Makefile | 1 +- arch/arm/dts/axp209.dtsi | 6 +- arch/arm/dts/ntc-gr8-chip-pro.dts | 266 +++++++- arch/arm/dts/ntc-gr8.dtsi | 1132 ++++++++++++++++++++++++++++++- configs/CHIP_pro_defconfig | 27 +- drivers/mtd/nand/Kconfig | 16 +- drivers/mtd/nand/nand_ids.c | 3 +- include/configs/sunxi-common.h | 26 +- scripts/Makefile.spl | 12 +- tools/.gitignore | 1 +- tools/Makefile | 1 +- tools/sunxi-spl-image-builder.c | 1113 +++++++++++++++++++++++++++++- 13 files changed, 2603 insertions(+), 4 deletions(-) create mode 100644 arch/arm/dts/ntc-gr8-chip-pro.dts create mode 100644 arch/arm/dts/ntc-gr8.dtsi create mode 100644 configs/CHIP_pro_defconfig create mode 100644 tools/sunxi-spl-image-builder.c base-commit: d8bdfc80da39211d95f10d24e79f2e867305f71b -- git-series 0.8.11

6 43

[U-Boot] [PATCH] splash: fix splash source flags check
by Tomas Melin 17 Nov '16

17 Nov '16

SPLASH_STORAGE_RAW is defined as 0, so a check against & will never be true. These flags are never combined so do a check against == instead. Signed-off-by: Tomas Melin <tomas.melin(a)vaisala.com> --- common/splash_source.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/common/splash_source.c b/common/splash_source.c index 230b2db..72df2c1 100644 --- a/common/splash_source.c +++ b/common/splash_source.c @@ -327,10 +327,9 @@ int splash_source_load(struct splash_location *locations, uint size) if (!splash_location) return -EINVAL; - if (splash_location->flags & SPLASH_STORAGE_RAW) + if (splash_location->flags == SPLASH_STORAGE_RAW) return splash_load_raw(splash_location, bmp_load_addr); - else if (splash_location->flags & SPLASH_STORAGE_FS) + else if (splash_location->flags == SPLASH_STORAGE_FS) return splash_load_fs(splash_location, bmp_load_addr); - return -EINVAL; } -- 2.1.4

2 1

[U-Boot] [PULL 00/24] efi patch queue 2016-11-17
by Alexander Graf 17 Nov '16

17 Nov '16

Hi Tom, This is my current patch queue for efi. Please pull. Alex The following changes since commit 29e0cfb4f77f7aa369136302cee14a91e22dca71: Prepare v2016.11 (2016-11-14 11:27:11 -0500) are available in the git repository at: git://github.com/agraf/u-boot.git tags/signed-efi-next for you to fetch changes up to b99ebaf9f01ebe864061818e00beb70cb1ddc635: ls2080ardb: Convert to distro boot (2016-11-17 14:18:56 +0100) ---------------------------------------------------------------- Patch queue for efi - 2016-11-17 Highlights this time around: - x86 efi_loader support - hello world efi test case - network device name is now representative - terminal output reports modes correctly - fix psci reset for ls1043/ls1046 - fix efi_add_runtime_mmio definition for x86 - efi_loader support for ls2080 ---------------------------------------------------------------- Alexander Graf (8): efi_loader: AArch64: Run EFI payloads in EL2 if U-Boot runs in EL3 efi_loader: Disable PSCI reset for ls1043 and ls1046 efi_loader: Fix efi_add_runtime_mmio definition ls2080: Exit dpaa only right before exiting U-Boot ls2080ardb: Reserve DP-DDR RAM armv8: ls2080a: Declare spin tables as reserved for efi loader armv8: fsl-layerscape: Add support for efi_loader RTS reset ls2080ardb: Convert to distro boot Emmanuel Vadot (1): efi_loader: console: Correctly report modes Masahiro Yamada (1): efi_loader: fix depends on line of EFI_LOADER Oleksandr Tymoshenko (1): efi: Use device device path type Messaging for network interface node Simon Glass (13): x86: Correct a build warning in x86 tables efi: Correct cache flush alignment efi: Fix debug message address format x86: Tidy up selection of building the EFI stub efi: Makefile: Export variables for use with EFI efi: Add support for a hello world test program elf: arm: Add a few ARM relocation types efi: arm: Add EFI app support efi: arm: Add aarch64 EFI app support x86: Move efi .lds files into the 'lib' directory x86: Move efi .S files into the 'lib' directory efi: x86: Adjust EFI files support efi_loader x86: Enable EFI loader support Kconfig | 1 + Makefile | 11 +- arch/arm/config.mk | 7 ++ arch/arm/cpu/armv8/Kconfig | 5 +- arch/arm/cpu/armv8/config.mk | 4 + arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 33 ++++- arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 6 + arch/arm/include/asm/u-boot-arm.h | 1 + arch/arm/lib/Makefile | 10 ++ arch/arm/lib/bootm.c | 7 ++ arch/arm/lib/crt0_aarch64_efi.S | 135 ++++++++++++++++++++ arch/arm/lib/crt0_arm_efi.S | 138 +++++++++++++++++++++ arch/arm/lib/elf_aarch64_efi.lds | 70 +++++++++++ arch/arm/lib/elf_arm_efi.lds | 70 +++++++++++ arch/arm/lib/reloc_aarch64_efi.c | 87 +++++++++++++ arch/arm/lib/reloc_arm_efi.c | 66 ++++++++++ arch/arm/lib/relocate.S | 3 +- arch/arm/lib/relocate_64.S | 3 +- arch/x86/config.mk | 20 ++- arch/x86/include/asm/u-boot-x86.h | 1 + arch/x86/lib/Makefile | 23 ++++ arch/x86/lib/bootm.c | 4 + .../lib/{efi/crt0-efi-ia32.S => crt0_ia32_efi.S} | 0 .../{efi/crt0-efi-x86_64.S => crt0_x86_64_efi.S} | 0 arch/x86/lib/efi/Makefile | 18 --- arch/x86/{cpu/efi => lib}/elf_ia32_efi.lds | 2 - arch/x86/{cpu/efi => lib}/elf_x86_64_efi.lds | 2 - .../x86/lib/{efi/reloc_ia32.c => reloc_ia32_efi.c} | 0 .../lib/{efi/reloc_x86_64.c => reloc_x86_64_efi.c} | 0 arch/x86/lib/tables.c | 2 + board/freescale/ls2080a/ls2080a.c | 6 +- board/freescale/ls2080aqds/ls2080aqds.c | 11 +- board/freescale/ls2080ardb/ls2080ardb.c | 20 ++- cmd/Kconfig | 9 ++ cmd/bootefi.c | 40 ++++-- configs/efi-x86_defconfig | 1 + doc/README.efi | 14 +++ doc/README.x86 | 1 - drivers/net/fsl-mc/mc.c | 24 +++- include/asm-generic/sections.h | 2 + include/configs/ls2080ardb.h | 26 +++- include/efi.h | 7 +- include/efi_api.h | 13 ++ include/efi_loader.h | 2 +- include/elf.h | 13 ++ lib/efi/Makefile | 4 +- lib/efi_loader/Kconfig | 2 +- lib/efi_loader/Makefile | 4 + lib/efi_loader/efi_boottime.c | 2 + lib/efi_loader/efi_console.c | 100 ++++++++++++--- lib/efi_loader/efi_image_loader.c | 3 +- lib/efi_loader/efi_net.c | 17 +-- lib/efi_loader/helloworld.c | 24 ++++ scripts/Makefile.lib | 33 +++++ 54 files changed, 1021 insertions(+), 86 deletions(-) create mode 100644 arch/arm/lib/crt0_aarch64_efi.S create mode 100644 arch/arm/lib/crt0_arm_efi.S create mode 100644 arch/arm/lib/elf_aarch64_efi.lds create mode 100644 arch/arm/lib/elf_arm_efi.lds create mode 100644 arch/arm/lib/reloc_aarch64_efi.c create mode 100644 arch/arm/lib/reloc_arm_efi.c rename arch/x86/lib/{efi/crt0-efi-ia32.S => crt0_ia32_efi.S} (100%) rename arch/x86/lib/{efi/crt0-efi-x86_64.S => crt0_x86_64_efi.S} (100%) rename arch/x86/{cpu/efi => lib}/elf_ia32_efi.lds (98%) rename arch/x86/{cpu/efi => lib}/elf_x86_64_efi.lds (98%) rename arch/x86/lib/{efi/reloc_ia32.c => reloc_ia32_efi.c} (100%) rename arch/x86/lib/{efi/reloc_x86_64.c => reloc_x86_64_efi.c} (100%) create mode 100644 lib/efi_loader/helloworld.c

2 1

[U-Boot] Please pull u-boot-mmc master
by Jaehoon Chung 17 Nov '16

17 Nov '16

Dear Tom, Could you these patches on u-boot/master, plz? The following changes since commit 29e0cfb4f77f7aa369136302cee14a91e22dca71: Prepare v2016.11 (2016-11-14 11:27:11 -0500) are available in the git repository at: http://git.denx.de/u-boot-mmc.git master for you to fetch changes up to 91f839d2d30e489c2d6bf0deafb65b01d416b715: sunxi: sina33: Enable the LCD (2016-11-16 13:30:18 +0900) ---------------------------------------------------------------- Maxime Ripard (4): mmc: Retry the switch command mmc: sunxi: Enable 8bits bus width for sun8i sunxi: sina33: Enable the eMMC sunxi: sina33: Enable the LCD configs/Sinlinx_SinA33_defconfig | 5 +++++ drivers/mmc/mmc.c | 15 +++++++++++---- drivers/mmc/sunxi_mmc.c | 2 +- 3 files changed, 17 insertions(+), 5 deletions(-) Best Regards, Jaehoon Chung

2 1

[U-Boot] [GIT PULL] Xilinx changes
by Michal Simek 17 Nov '16

17 Nov '16

Hi Tom, please pull these changes to your tree. There are several things in this PR like DTS cleanups, Topic NL board with extending mkimage format and nand driver. I have run buildman over it and there is not an issue. ./tools/buildman/buildman -b master zynq -C Thanks, Michal The following changes since commit 29e0cfb4f77f7aa369136302cee14a91e22dca71: Prepare v2016.11 (2016-11-14 11:27:11 -0500) are available in the git repository at: git://www.denx.de/git/u-boot-microblaze.git master for you to fetch changes up to 688d1be5ba63be281c2894e74b27209133598e2e: ARM64: zynqmp: Adding prefetchable memory space to pcie (2016-11-15 15:30:41 +0100) ---------------------------------------------------------------- Anurag Kumar Vulisha (1): ARM64: zynqmp: Add device tree properties for ZynqMP GT core Bharat Kumar Gogada (2): ARM64: zynqmp: pci: Updating device tree as per upstream ARM64: zynqmp: Adding prefetchable memory space to pcie Filip Drazic (4): ARM64: zynqmp: DT: Remove unused DDR PM domain ARM64: zynqmp: DT: Remove unused PM domains for PLL ARM64: zynqmp: DT: Add PM domains for GPU and PCIE ARM64: zynqmp: Support for multiple PM IDs assigned to a PM domain Hyun Kwon (1): ARM64: zynqmp: drm: Add DMA index Kedareswara rao Appana (3): ARM64: zynqmp: Add clocks for LPDDMA ARM64: zynqmp: Add description for LPDDMA channel usage ARM64: zynqmp: Add clocks for LPDDMA Michal Simek (18): tools: mkimage: Check if file is regular file zynq: nand: Runtime detection of nand buswidth through slcr ARM: zynq: Add support for Zynq 7000S 7007s/7012s/7014s devices ARM64: zynqmp: Record board name as serial number for DFU/FASTBOOT ARM64: zynqmp: Fix secondary bootmode enabling ARM64: zynqmp: Ignore warnings from autogenerated files ARM: zynq: Remove DTC 1.4.2 warnings ARM64: zynqmp: Remove DTC 1.4.2 warnings ARM64: zynqmp: Enable gpio-led as heartbeat on zcu102 ARM64: zynqmp: Add gpio-keys for zcu102 ARM64: zynqmp: Add dcc port to dtsi ARM64: zynqmp: Remove note about level shifter on zcu102 ARM64: zynqmp: Remove xlnx,id property ARM64: zynqmp: Sync gpio node properties Revert "ARM64: zynqmp: Add serdes address space dp driver" ARM64: zynqmp: List all SMMU ids Revert "ARM64: zynqmp: Added broken-tuning property to SD, eMMC nodes" ARM64: zynqmp: Use 64bit size cell format for main amba bus Mike Looijmans (3): tools: mkimage: Add support for initialization table for Zynq and ZynqMP ARM: zynq: Make SYS_VENDOR configurable ARM: zynq: Add support for the topic-miami system-on-modules and carrier boards Naga Sureshkumar Relli (3): ARM64: zynqmp: Enable can1 for ep108 ARM64: zynqmp: Add cortexa53 edac node ARM64: zynqmp: Add ocm node in dtsi Nava kishore Manne (1): ARM64: zynqmp: Add support for zynqmp fpga manager Sai Krishna Potthuri (1): ARM64: zynqmp: change sdhci compatible string. Siva Durga Prasad Paladugu (7): mtd: nand: zynq_nand: Add nand driver support for zynq zynq: nand: Enable Nand flash controller driver a zynq board nand: arasan_nfc: Clear ecc on bit while sending read command net: zynq_gem: Modify the nwcfg bit definitions net: zynq_gem: Correct SGMII enable bit setting ARM64: zynqmp: Add support for SD1 with level shifters bootmode ARM64: zynqmp: Correct the sdhci minimum frequency for ep108 Soren Brinkmann (1): ARM64: zynqmp: Adjust to new SMC interface to get silicon version VNSL Durga (1): ARM64: zynqmp: Added clocks to DT for ep108 arch/arm/cpu/armv8/zynqmp/Kconfig | 7 + arch/arm/cpu/armv8/zynqmp/spl.c | 6 +- arch/arm/dts/Makefile | 2 + arch/arm/dts/zynq-7000.dtsi | 7 +- arch/arm/dts/zynq-microzed.dts | 2 +- arch/arm/dts/zynq-picozed.dts | 2 +- arch/arm/dts/zynq-topic-miami.dts | 97 +++++++++++++ arch/arm/dts/zynq-topic-miamiplus.dts | 17 +++ arch/arm/dts/zynq-zc702.dts | 2 +- arch/arm/dts/zynq-zc706.dts | 2 +- arch/arm/dts/zynq-zc770-xm010.dts | 2 +- arch/arm/dts/zynq-zc770-xm011.dts | 2 +- arch/arm/dts/zynq-zed.dts | 2 +- arch/arm/dts/zynq-zybo.dts | 2 +- arch/arm/dts/zynqmp-clk.dtsi | 32 +++++ arch/arm/dts/zynqmp-ep108-clk.dtsi | 48 +++++++ arch/arm/dts/zynqmp-ep108.dts | 8 +- arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts | 4 +- arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts | 2 +- arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts | 2 +- arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts | 2 +- arch/arm/dts/zynqmp-zcu102.dts | 34 ++++- arch/arm/dts/zynqmp.dtsi | 341 ++++++++++++++++++++++++++++---------------- arch/arm/include/asm/arch-zynqmp/hardware.h | 1 + arch/arm/mach-zynq/Kconfig | 8 ++ arch/arm/mach-zynq/slcr.c | 25 ++++ board/topic/zynq/MAINTAINERS | 6 + board/topic/zynq/Makefile | 10 ++ board/topic/zynq/board.c | 1 + board/topic/zynq/ps7_init_common.c | 117 +++++++++++++++ board/topic/zynq/ps7_init_gpl.h | 34 +++++ board/topic/zynq/zynq-topic-miami/ps7_init_gpl.c | 227 +++++++++++++++++++++++++++++ board/topic/zynq/zynq-topic-miami/ps7_regs.txt | 61 ++++++++ board/topic/zynq/zynq-topic-miamiplus/ps7_init_gpl.c | 233 ++++++++++++++++++++++++++++++ board/topic/zynq/zynq-topic-miamiplus/ps7_regs.txt | 61 ++++++++ board/xilinx/zynq/board.c | 12 ++ board/xilinx/zynqmp/Makefile | 3 + board/xilinx/zynqmp/xil_io.h | 9 ++ board/xilinx/zynqmp/zynqmp.c | 21 +++ configs/topic_miami_defconfig | 49 +++++++ configs/topic_miamiplus_defconfig | 49 +++++++ configs/zynq_zc770_xm011_defconfig | 2 + drivers/mtd/nand/Kconfig | 7 + drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/arasan_nfc.c | 2 + drivers/mtd/nand/zynq_nand.c | 1186 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/zynq_gem.c | 16 +-- include/configs/topic_miami.h | 149 +++++++++++++++++++ include/configs/topic_miamiplus.h | 2 + include/configs/xilinx_zynqmp_ep.h | 2 +- include/configs/zynq-common.h | 7 + include/zynqmppl.h | 6 + include/zynqpl.h | 18 +++ scripts/Makefile.spl | 4 +- tools/zynqimage.c | 28 ++++ tools/zynqmpimage.c | 34 +++++ 58 files changed, 2865 insertions(+), 155 deletions(-) create mode 100644 arch/arm/dts/zynq-topic-miami.dts create mode 100644 arch/arm/dts/zynq-topic-miamiplus.dts create mode 100644 board/topic/zynq/MAINTAINERS create mode 100644 board/topic/zynq/Makefile create mode 100644 board/topic/zynq/board.c create mode 100644 board/topic/zynq/ps7_init_common.c create mode 100644 board/topic/zynq/ps7_init_gpl.h create mode 100644 board/topic/zynq/zynq-topic-miami/ps7_init_gpl.c create mode 100644 board/topic/zynq/zynq-topic-miami/ps7_regs.txt create mode 100644 board/topic/zynq/zynq-topic-miamiplus/ps7_init_gpl.c create mode 100644 board/topic/zynq/zynq-topic-miamiplus/ps7_regs.txt create mode 100644 configs/topic_miami_defconfig create mode 100644 configs/topic_miamiplus_defconfig create mode 100644 drivers/mtd/nand/zynq_nand.c create mode 100644 include/configs/topic_miami.h create mode 100644 include/configs/topic_miamiplus.h -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP SoCs

3 3

[U-Boot] [PATCH v8 0/8] LS2080ARDB: Enable EFI boot support
by Alexander Graf 17 Nov '16

17 Nov '16

We now have EFI support in U-Boot which worked out of the box on all systems that I tried it on so far. Except for the LS2080ARDB. With this patch set I can successfully boot grub2 and Linux from there on such a system - even using PXE. This patch set depends on the efi-next queue and the efi runtime rename patch. For easy pulling, you can find the fully applied tree here: https://github.com/agraf/u-boot.git ls2085-efi-support-v8 v3 -> v4: - Add CONFIG_CMD_FS_GENERIC to defconfig - Move code into generic quiesce weak function - Exit device for real when going to Linux - Only apply DPL if we have something to apply - New: armv8: ls2080a: Declare spin tables as reserved for efi loader - New: efi_loader: Allow boards to implement get_time and reset_system - New: armv8: fsl-layerscape: Add support for efi_loader RTS reset - New: efi_loader: Declare secure memory as reserved - New: efi_loader: Allow bouncing for network v4 -> v5: - Drop patches that are in the efi queue already - efi_loader: Allow boards to implement get_time and reset_system - efi_loader: Allow bouncing for network - Remove manual ttbr / tcr copy - Regenerate page tables in EL2, getting us non-secured page tables - Add qspi board - Don't overwrite ethact - Use __efi_runtime tags - Use gd->arch.secure_ram v5 -> v6: - Move distro conversion to end of queue - use CONFIG_DISTRO_DEFAULTS - drop patch: "efi_loader: Declare secure memory as reserved" v6 -> v7: - Don't call efi_loader functions for SPL code - Add USB boot support v7 -> v8: - Put efi_add_runtime_mmio fix at beginning of queue - New patch: efi_loader: Disable PSCI reset for ls1043 and ls1046 Alexander Graf (8): efi_loader: Disable PSCI reset for ls1043 and ls1046 efi_loader: Fix efi_add_runtime_mmio definition ls2080: Exit dpaa only right before exiting U-Boot efi_loader: AArch64: Run EFI payloads in EL2 if U-Boot runs in EL3 ls2080ardb: Reserve DP-DDR RAM armv8: ls2080a: Declare spin tables as reserved for efi loader armv8: fsl-layerscape: Add support for efi_loader RTS reset ls2080ardb: Convert to distro boot Kconfig | 1 + arch/arm/cpu/armv8/Kconfig | 3 ++- arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 33 +++++++++++++++++++++++++++++++-- arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 6 ++++++ arch/arm/include/asm/u-boot-arm.h | 1 + arch/arm/lib/bootm.c | 7 +++++++ board/freescale/ls2080a/ls2080a.c | 6 +++++- board/freescale/ls2080aqds/ls2080aqds.c | 11 +++++------ board/freescale/ls2080ardb/ls2080ardb.c | 20 ++++++++++++++------ cmd/bootefi.c | 11 +++++++++++ drivers/net/fsl-mc/mc.c | 24 ++++++++++++++++++++++-- include/configs/ls2080ardb.h | 26 +++++++++++++++++++++++++- include/efi_loader.h | 2 +- lib/efi_loader/efi_boottime.c | 2 ++ 14 files changed, 133 insertions(+), 20 deletions(-) -- 1.8.5.6

2 23

[U-Boot] [PATCH] spl: mmc: fix build without CONFIG_SPL_LIBCOMMON_SUPPORT
by Yann E. MORIN 17 Nov '16

17 Nov '16

When CONFIG_SPL_LIBCOMMON_SUPPORT is disabled, the last case statement is missing a proper statement, which makes the compiler whine. Signed-off-by: "Yann E. MORIN" <yann.morin.1998(a)free.fr> Cc: Pantelis Antoniou <panto(a)antoniou-consulting.com> --- common/spl/spl_mmc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index c674e61..cc81d19 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -343,6 +343,7 @@ static int spl_mmc_load_image(struct spl_image_info *spl_image, break; case MMCSD_MODE_UNDEFINED: + ; #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT default: puts("spl: mmc: wrong boot mode\n"); -- 2.7.4

3 3

[U-Boot] 2016.09+fslc was working... But not anymore
by Carlos Alberto Musich Cuevas 17 Nov '16

17 Nov '16

Hello, The following sequence is causing the error below. Please note that few days ago it was working. SEQUENCE $ cd ~/ $ git clone https://github.com/Freescale/u-boot-fslc.git<https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2…> uboot2016 $ cd uboot2016 $ git checkout -b 2016.09+fslc remotes/origin/2016.09+fslc $ make udoo_defconfig $ make ERROR lib/asm-offsets.c:1:0: error: bad value (armv5) for -march= switch /* ^ make[1]: *** [lib/asm-offsets.s] Error 1 make: *** [prepare0] Error 2 Thanks! Regards, Carlos

2 2

[U-Boot] [PATCH v6 0/6] LS2080ARDB: Enable EFI boot support
by Alexander Graf 17 Nov '16

17 Nov '16

We now have EFI support in U-Boot which worked out of the box on all systems that I tried it on so far. Except for the LS2080ARDB. With this patch set I can successfully boot grub2 and Linux from there on such a system - even using PXE. This patch set depends on the efi-next queue and the efi runtime rename patch. For easy pulling, you can find the fully applied tree here: https://github.com/agraf/u-boot.git ls2085-efi-support-v6 v3 -> v4: - Add CONFIG_CMD_FS_GENERIC to defconfig - Move code into generic quiesce weak function - Exit device for real when going to Linux - Only apply DPL if we have something to apply - New: armv8: ls2080a: Declare spin tables as reserved for efi loader - New: efi_loader: Allow boards to implement get_time and reset_system - New: armv8: fsl-layerscape: Add support for efi_loader RTS reset - New: efi_loader: Declare secure memory as reserved - New: efi_loader: Allow bouncing for network v4 -> v5: - Drop patches that are in the efi queue already - efi_loader: Allow boards to implement get_time and reset_system - efi_loader: Allow bouncing for network - Remove manual ttbr / tcr copy - Regenerate page tables in EL2, getting us non-secured page tables - Add qspi board - Don't overwrite ethact - Use __efi_runtime tags - Use gd->arch.secure_ram v5 -> v6: - Move distro conversion to end of queue - use CONFIG_DISTRO_DEFAULTS - drop patch: "efi_loader: Declare secure memory as reserved" Alexander Graf (6): ls2080: Exit dpaa only right before exiting U-Boot efi_loader: AArch64: Run EFI payloads in EL2 if U-Boot runs in EL3 ls2080ardb: Reserve DP-DDR RAM armv8: ls2080a: Declare spin tables as reserved for efi loader armv8: fsl-layerscape: Add support for efi_loader RTS reset ls2080ardb: Convert to distro boot Kconfig | 1 + arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 33 +++++++++++++++++++++++++++++++-- arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 6 ++++++ arch/arm/include/asm/u-boot-arm.h | 1 + arch/arm/lib/bootm.c | 7 +++++++ board/freescale/ls2080a/ls2080a.c | 6 +++++- board/freescale/ls2080aqds/ls2080aqds.c | 11 +++++------ board/freescale/ls2080ardb/ls2080ardb.c | 20 ++++++++++++++------ cmd/bootefi.c | 11 +++++++++++ drivers/net/fsl-mc/mc.c | 24 ++++++++++++++++++++++-- include/configs/ls2080ardb.h | 25 ++++++++++++++++++++++++- lib/efi_loader/efi_boottime.c | 2 ++ 12 files changed, 129 insertions(+), 18 deletions(-) -- 1.8.5.6

2 18

[U-Boot] [PATCH 0/4] config: Add FreeBSD kconfig options
by Emmanuel Vadot 17 Nov '16

17 Nov '16

This series of patches add the needed bits for booting the FreeBSD loader. FreeBSD loader needs the U-Boot API and dache disabled for it to run so add kconfig options for them. Also add some some boot command that locate and run the FreeBSD loader if found. Emmanuel Vadot (4): kconfig: Add API kconfig file kconfig: arm: Add SYS_DCACHE_OFF option kconfig: Add a FREEBSD option distro_bootcmd: Add command to run FreeBSD Kconfig | 2 ++ api/Kconfig | 9 +++++++++ arch/arm/Kconfig | 6 ++++++ common/Kconfig | 9 +++++++++ include/config_distro_bootcmd.h | 32 ++++++++++++++++++++++++++++++++ 5 files changed, 58 insertions(+) create mode 100644 api/Kconfig -- 2.9.2

2 7