November 2016 - U-Boot

[U-Boot] [PATCH v5 00/13] binman: A tool for creating firmware images
by Simon Glass 05 Dec '16

05 Dec '16

This series introduces binman, a tool designed to create firmware images. It provides a way to bring together various binaries and place them in an image, at particular positions and with configurable alignment. Packaging of firmware is quite a different task from building the various parts. In many cases the various binaries which go into the image come from separate build systems. For example, ARM Trusted Firmware is used on ARMv8 devices but is not built in the U-Boot tree. If a Linux kernel is included in the firmware image, it is built elsewhere. It is of course possible to add more and more build rules to the U-Boot build system to cover these cases. It can shell out to other Makefiles and build scripts. But it seems better to create a clear divide between building software and packaging it. U-Boot supports a very large number of boards. Many of these have their own specific rules for how an image should be put together so that it boots correctly. At present these rules are described by manual instructions, different for each board. By turning these instructions into a standard format, we can support making valid images for any board without manual effort, lots of READMEs, etc. Images consist of a number of entries which are combined to make up the final image. The image is described in the device tree for the board, meaning that it can be accessed at run-time if desired. Binman is an extensible tool. A set of standard entries is provides, but new entries can be created fairly easily. Entries can be as simple as providing the name of a file to include. They can also handle more complex requirements, such as adjusting the input file or reading header information from one entry to control the position of another. U-Boot's mkimage builds FIT images and various other binaries. Binman augments this by allowing these binaries to be packed together. While FIT should be used where possible, it cannot be used everywhere. For example, many devices require executable code at a particular offset in the image. X86 machines require lots of binary blobs at particular places, and a microcode collection easily accessible at boot. So far binman has enough functionality to be useful, so sunxi and x86 boards are switched over to use it, as examples. The series is available at u-boot-dm/binman-working Future work and missing features are documented in the README. Changes in v5: - Add a Makefile 'warning' line for debugging - Add a dependency on u-boot.dtb for buildman - Add a new for optional microcode - Add a new patch to drop microcode features from ifdtool - Add a new tegra patch to use an automatically included .dtsi file - Add documentation for the 'optional-ucode' property - Add documentation for this feature - Add instructions on how to generate html code coverage - Add missing 'descriptor.bin' file - Allow microcode to be optional - Allow the compiled device tree to be returned from _DoReadFileDtb() - Change the Makefile variable from binman_... to u_boot_... - Print 'binman' before all errors - Put the code to calculate dtb total length in a function - Remove commented-out PYTHONPATH code which is not needed now Changes in v4: - Add an option to bring in an soc .dtsi file also - Add new patch to support building x86 images with FSP/CMC - Fix incorrect comments at the top of intel_*.py - Remove RFC tag - Use binman for all sunxi boards - Use binman for all x86 boards Changes in v3: - Add a new patch to automatically include a U-Boot .dtsi file - Put the binman definition in u-boot.dtsi - Use a <dts>-u-boot.dtsi file for the binman changes Changes in v2: - Add automated test coverage - Add test for code coverage - Fix the -b option - Put the binman definition in a common file for x86 - Various changes and improvements based on using this tool for a while - drop the unused __len__() method Simon Glass (13): binman: Introduce binman, a tool for building binary images binman: Add basic entry types for U-Boot binman: Add support for building x86 ROMs binman: Add support for u-boot.img as an input binary binman: Add support for building x86 ROMs with SPL binman: Add support for building x86 images with FSP/CMC binman: Add a build rule for binman binman: Allow configuration options to be used in .dts files binman: Automatically include a U-Boot .dtsi file tegra: Use a U-Boot-specific .dtsi file sunxi: Use binman for sunxi boards x86: Use binman all x86 boards binman: Drop microcode features from ifdtool Makefile | 57 +- arch/arm/dts/sunxi-u-boot.dtsi | 14 + arch/arm/dts/tegra124-nyan-big-u-boot.dtsi | 15 + arch/arm/dts/tegra124-nyan-big.dts | 2 - arch/arm/dts/tegra20-u-boot.dtsi | 11 + arch/arm/dts/tegra20.dtsi | 2 - arch/x86/dts/emulation-u-boot.dtsi | 18 + arch/x86/dts/u-boot.dtsi | 62 ++ scripts/Makefile.lib | 25 +- tools/binman/.gitignore | 1 + tools/binman/README | 541 ++++++++++++++ tools/binman/binman | 1 + tools/binman/binman.py | 114 +++ tools/binman/cmdline.py | 53 ++ tools/binman/control.py | 118 +++ tools/binman/entry_test.py | 27 + tools/binman/etype/_testing.py | 26 + tools/binman/etype/blob.py | 37 + tools/binman/etype/entry.py | 190 +++++ tools/binman/etype/intel_cmc.py | 17 + tools/binman/etype/intel_descriptor.py | 55 ++ tools/binman/etype/intel_fsp.py | 17 + tools/binman/etype/intel_me.py | 17 + tools/binman/etype/intel_mrc.py | 17 + tools/binman/etype/intel_vga.py | 17 + tools/binman/etype/u_boot.py | 17 + tools/binman/etype/u_boot_dtb.py | 17 + tools/binman/etype/u_boot_dtb_with_ucode.py | 76 ++ tools/binman/etype/u_boot_img.py | 17 + tools/binman/etype/u_boot_nodtb.py | 17 + tools/binman/etype/u_boot_spl.py | 17 + tools/binman/etype/u_boot_spl_bss_pad.py | 26 + tools/binman/etype/u_boot_spl_with_ucode_ptr.py | 28 + tools/binman/etype/u_boot_ucode.py | 84 +++ tools/binman/etype/u_boot_with_ucode_ptr.py | 87 +++ tools/binman/etype/x86_start16.py | 17 + tools/binman/etype/x86_start16_spl.py | 17 + tools/binman/fdt_test.py | 48 ++ tools/binman/func_test.py | 822 +++++++++++++++++++++ tools/binman/image.py | 229 ++++++ tools/binman/test/01_invalid.dts | 5 + tools/binman/test/02_missing_node.dts | 6 + tools/binman/test/03_empty.dts | 9 + tools/binman/test/04_invalid_entry.dts | 11 + tools/binman/test/05_simple.dts | 11 + tools/binman/test/06_dual_image.dts | 22 + tools/binman/test/07_bad_align.dts | 12 + tools/binman/test/08_pack.dts | 30 + tools/binman/test/09_pack_extra.dts | 35 + tools/binman/test/10_pack_align_power2.dts | 12 + tools/binman/test/11_pack_align_size_power2.dts | 12 + tools/binman/test/12_pack_inv_align.dts | 13 + tools/binman/test/13_pack_inv_size_align.dts | 13 + tools/binman/test/14_pack_overlap.dts | 16 + tools/binman/test/15_pack_overflow.dts | 12 + tools/binman/test/16_pack_image_overflow.dts | 13 + tools/binman/test/17_pack_image_size.dts | 13 + tools/binman/test/18_pack_image_align.dts | 13 + tools/binman/test/19_pack_inv_image_align.dts | 14 + .../binman/test/20_pack_inv_image_align_power2.dts | 13 + tools/binman/test/21_image_pad.dts | 16 + tools/binman/test/22_image_name.dts | 21 + tools/binman/test/23_blob.dts | 12 + tools/binman/test/24_sorted.dts | 17 + tools/binman/test/25_pack_zero_size.dts | 15 + tools/binman/test/26_pack_u_boot_dtb.dts | 14 + tools/binman/test/27_pack_4gb_no_size.dts | 18 + tools/binman/test/28_pack_4gb_outside.dts | 19 + tools/binman/test/29_x86-rom.dts | 19 + tools/binman/test/30_x86-rom-me-no-desc.dts | 15 + tools/binman/test/31_x86-rom-me.dts | 18 + tools/binman/test/32_intel-vga.dts | 13 + tools/binman/test/33_x86-start16.dts | 13 + tools/binman/test/34_x86_ucode.dts | 29 + tools/binman/test/35_x86_single_ucode.dts | 26 + tools/binman/test/36_u_boot_img.dts | 11 + tools/binman/test/37_x86_no_ucode.dts | 20 + tools/binman/test/38_x86_ucode_missing_node.dts | 26 + tools/binman/test/39_x86_ucode_missing_node2.dts | 23 + tools/binman/test/40_x86_ucode_not_in_image.dts | 28 + tools/binman/test/41_unknown_pos_size.dts | 11 + tools/binman/test/42_intel-fsp.dts | 13 + tools/binman/test/43_intel-cmc.dts | 13 + tools/binman/test/44_x86_optional_ucode.dts | 30 + tools/binman/test/descriptor.bin | Bin 0 -> 4096 bytes tools/binman/test/u_boot_no_ucode_ptr | Bin 0 -> 4182 bytes tools/binman/test/u_boot_no_ucode_ptr.c | 15 + tools/binman/test/u_boot_ucode_ptr | Bin 0 -> 4175 bytes tools/binman/test/u_boot_ucode_ptr.c | 15 + tools/binman/test/u_boot_ucode_ptr.lds | 18 + tools/ifdtool.c | 254 +------ 91 files changed, 3700 insertions(+), 300 deletions(-) create mode 100644 arch/arm/dts/sunxi-u-boot.dtsi create mode 100644 arch/arm/dts/tegra124-nyan-big-u-boot.dtsi create mode 100644 arch/arm/dts/tegra20-u-boot.dtsi create mode 100644 arch/x86/dts/emulation-u-boot.dtsi create mode 100644 arch/x86/dts/u-boot.dtsi create mode 100644 tools/binman/.gitignore create mode 100644 tools/binman/README create mode 120000 tools/binman/binman create mode 100755 tools/binman/binman.py create mode 100644 tools/binman/cmdline.py create mode 100644 tools/binman/control.py create mode 100644 tools/binman/entry_test.py create mode 100644 tools/binman/etype/_testing.py create mode 100644 tools/binman/etype/blob.py create mode 100644 tools/binman/etype/entry.py create mode 100644 tools/binman/etype/intel_cmc.py create mode 100644 tools/binman/etype/intel_descriptor.py create mode 100644 tools/binman/etype/intel_fsp.py create mode 100644 tools/binman/etype/intel_me.py create mode 100644 tools/binman/etype/intel_mrc.py create mode 100644 tools/binman/etype/intel_vga.py create mode 100644 tools/binman/etype/u_boot.py create mode 100644 tools/binman/etype/u_boot_dtb.py create mode 100644 tools/binman/etype/u_boot_dtb_with_ucode.py create mode 100644 tools/binman/etype/u_boot_img.py create mode 100644 tools/binman/etype/u_boot_nodtb.py create mode 100644 tools/binman/etype/u_boot_spl.py create mode 100644 tools/binman/etype/u_boot_spl_bss_pad.py create mode 100644 tools/binman/etype/u_boot_spl_with_ucode_ptr.py create mode 100644 tools/binman/etype/u_boot_ucode.py create mode 100644 tools/binman/etype/u_boot_with_ucode_ptr.py create mode 100644 tools/binman/etype/x86_start16.py create mode 100644 tools/binman/etype/x86_start16_spl.py create mode 100644 tools/binman/fdt_test.py create mode 100644 tools/binman/func_test.py create mode 100644 tools/binman/image.py create mode 100644 tools/binman/test/01_invalid.dts create mode 100644 tools/binman/test/02_missing_node.dts create mode 100644 tools/binman/test/03_empty.dts create mode 100644 tools/binman/test/04_invalid_entry.dts create mode 100644 tools/binman/test/05_simple.dts create mode 100644 tools/binman/test/06_dual_image.dts create mode 100644 tools/binman/test/07_bad_align.dts create mode 100644 tools/binman/test/08_pack.dts create mode 100644 tools/binman/test/09_pack_extra.dts create mode 100644 tools/binman/test/10_pack_align_power2.dts create mode 100644 tools/binman/test/11_pack_align_size_power2.dts create mode 100644 tools/binman/test/12_pack_inv_align.dts create mode 100644 tools/binman/test/13_pack_inv_size_align.dts create mode 100644 tools/binman/test/14_pack_overlap.dts create mode 100644 tools/binman/test/15_pack_overflow.dts create mode 100644 tools/binman/test/16_pack_image_overflow.dts create mode 100644 tools/binman/test/17_pack_image_size.dts create mode 100644 tools/binman/test/18_pack_image_align.dts create mode 100644 tools/binman/test/19_pack_inv_image_align.dts create mode 100644 tools/binman/test/20_pack_inv_image_align_power2.dts create mode 100644 tools/binman/test/21_image_pad.dts create mode 100644 tools/binman/test/22_image_name.dts create mode 100644 tools/binman/test/23_blob.dts create mode 100644 tools/binman/test/24_sorted.dts create mode 100644 tools/binman/test/25_pack_zero_size.dts create mode 100644 tools/binman/test/26_pack_u_boot_dtb.dts create mode 100644 tools/binman/test/27_pack_4gb_no_size.dts create mode 100644 tools/binman/test/28_pack_4gb_outside.dts create mode 100644 tools/binman/test/29_x86-rom.dts create mode 100644 tools/binman/test/30_x86-rom-me-no-desc.dts create mode 100644 tools/binman/test/31_x86-rom-me.dts create mode 100644 tools/binman/test/32_intel-vga.dts create mode 100644 tools/binman/test/33_x86-start16.dts create mode 100644 tools/binman/test/34_x86_ucode.dts create mode 100644 tools/binman/test/35_x86_single_ucode.dts create mode 100644 tools/binman/test/36_u_boot_img.dts create mode 100644 tools/binman/test/37_x86_no_ucode.dts create mode 100644 tools/binman/test/38_x86_ucode_missing_node.dts create mode 100644 tools/binman/test/39_x86_ucode_missing_node2.dts create mode 100644 tools/binman/test/40_x86_ucode_not_in_image.dts create mode 100644 tools/binman/test/41_unknown_pos_size.dts create mode 100644 tools/binman/test/42_intel-fsp.dts create mode 100644 tools/binman/test/43_intel-cmc.dts create mode 100644 tools/binman/test/44_x86_optional_ucode.dts create mode 100644 tools/binman/test/descriptor.bin create mode 100755 tools/binman/test/u_boot_no_ucode_ptr create mode 100644 tools/binman/test/u_boot_no_ucode_ptr.c create mode 100755 tools/binman/test/u_boot_ucode_ptr create mode 100644 tools/binman/test/u_boot_ucode_ptr.c create mode 100644 tools/binman/test/u_boot_ucode_ptr.lds -- 2.8.0.rc3.226.g39d4020

2 19

[U-Boot] [PATCH 0/5] arm: tegra: apalis-tk1, mmc and ext clock loopback
by Marcel Ziswiler 05 Dec '16

05 Dec '16

From: Marcel Ziswiler <marcel.ziswiler(a)toradex.com> This series adds support for the Toradex Apalis TK1 as well as moves the CONFIG_TEGRA_MMC to Kconfig and introduces a new option to disable the external clock loopback on SDMMC3. The whole series is also available here: http://git.toradex.com/cgit/u-boot-toradex.git/log/?h=for-next Marcel Ziswiler (5): arm: tegra: initial support for apalis tk1 mmc: tegra: introduce CONFIG_TEGRA_MMC to Kconfig mmc: tegra: move CONFIG_TEGRA_MMC from headers to defconfigs mmc: tegra: allow disabling external clock loopback apalis-tk1: disable external clock loopback on SDMMC3 arch/arm/dts/Makefile | 1 + arch/arm/dts/tegra124-apalis.dts | 2203 ++++++++++++++++++++ arch/arm/include/asm/arch-tegra/tegra_mmc.h | 2 + arch/arm/mach-tegra/tegra124/Kconfig | 7 + board/toradex/apalis-tk1/Kconfig | 30 + board/toradex/apalis-tk1/MAINTAINERS | 7 + board/toradex/apalis-tk1/Makefile | 5 + board/toradex/apalis-tk1/apalis-tk1.c | 175 ++ board/toradex/apalis-tk1/as3722_init.c | 117 ++ board/toradex/apalis-tk1/as3722_init.h | 41 + .../toradex/apalis-tk1/pinmux-config-apalis-tk1.h | 287 +++ configs/apalis-tk1_defconfig | 55 + configs/apalis_t30_defconfig | 1 + configs/beaver_defconfig | 1 + configs/cardhu_defconfig | 1 + configs/cei-tk1-som_defconfig | 1 + configs/colibri_t20_defconfig | 1 + configs/colibri_t30_defconfig | 1 + configs/dalmore_defconfig | 1 + configs/harmony_defconfig | 1 + configs/jetson-tk1_defconfig | 1 + configs/medcom-wide_defconfig | 1 + configs/nyan-big_defconfig | 1 + configs/paz00_defconfig | 1 + configs/plutux_defconfig | 1 + configs/seaboard_defconfig | 1 + configs/tec-ng_defconfig | 1 + configs/tec_defconfig | 1 + configs/trimslice_defconfig | 1 + configs/venice2_defconfig | 1 + configs/ventana_defconfig | 1 + configs/whistler_defconfig | 1 + drivers/mmc/Kconfig | 14 + drivers/mmc/tegra_mmc.c | 13 + include/configs/apalis-tk1.h | 180 ++ include/configs/apalis_t30.h | 1 - include/configs/beaver.h | 1 - include/configs/cardhu.h | 1 - include/configs/cei-tk1-som.h | 1 - include/configs/colibri_t20.h | 1 - include/configs/colibri_t30.h | 1 - include/configs/dalmore.h | 1 - include/configs/e2220-1170.h | 1 - include/configs/harmony.h | 1 - include/configs/jetson-tk1.h | 1 - include/configs/medcom-wide.h | 1 - include/configs/nyan-big.h | 1 - include/configs/p2371-0000.h | 1 - include/configs/p2371-2180.h | 1 - include/configs/p2571.h | 1 - include/configs/p2771-0000.h | 1 - include/configs/paz00.h | 1 - include/configs/plutux.h | 1 - include/configs/seaboard.h | 1 - include/configs/tec-ng.h | 1 - include/configs/tec.h | 1 - include/configs/trimslice.h | 1 - include/configs/venice2.h | 1 - include/configs/ventana.h | 1 - include/configs/whistler.h | 1 - scripts/config_whitelist.txt | 1 - 61 files changed, 3157 insertions(+), 26 deletions(-) create mode 100644 arch/arm/dts/tegra124-apalis.dts create mode 100644 board/toradex/apalis-tk1/Kconfig create mode 100644 board/toradex/apalis-tk1/MAINTAINERS create mode 100644 board/toradex/apalis-tk1/Makefile create mode 100644 board/toradex/apalis-tk1/apalis-tk1.c create mode 100644 board/toradex/apalis-tk1/as3722_init.c create mode 100644 board/toradex/apalis-tk1/as3722_init.h create mode 100644 board/toradex/apalis-tk1/pinmux-config-apalis-tk1.h create mode 100644 configs/apalis-tk1_defconfig create mode 100644 include/configs/apalis-tk1.h -- 2.9.3

2 13

[U-Boot] [PATCH 0/9] ARM: ti: am57xx: Add support for latest am57xx boards
by Lokesh Vutla 05 Dec '16

05 Dec '16

This series adds support for: - AM572x-GP evm revA3 - BeagleBoard-X15 revb1 - AM571x-IDK Also update the pinmux using the latest PMT for AM572x-IDK. Logs: AM572x-GP evm revA3: http://pastebin.ubuntu.com/23530844/ AM572x-IDK: http://pastebin.ubuntu.com/23530850/ AM571x-IDK: http://pastebin.ubuntu.com/23530858/ Lokesh Vutla (4): ARM: dts: am57xx: sync DT with latest Linux board: ti: am57xx: Add support for detection of X15 revb1 board: ti: am572x-idk: Update pinmux using latest PMT ti_armv7_common: env: Increase IO buffer size Nishanth Menon (3): board: ti: am57xx: Add support for detection of reva3 variations for GPEVM board: ti: am57xx: Update SR1.1 RGMII0 iodelay timings for x15/GPEVM board: ti: am572x: Add pinmux for X15/GPEVM SR2.0 using latest PMT Schuyler Patton (1): ARM: dts: AM571x-IDK Initial Support Steve Kipisz (1): board: ti: am57xx: Add support for the am571x idk arch/arm/dts/Makefile | 4 +- arch/arm/dts/am571x-idk.dts | 81 +++ arch/arm/dts/am572x-idk.dts | 6 +- arch/arm/dts/am57xx-beagle-x15-common.dtsi | 600 +++++++++++++++++ arch/arm/dts/am57xx-beagle-x15-revb1.dts | 24 + arch/arm/dts/am57xx-beagle-x15.dts | 689 +------------------- arch/arm/dts/am57xx-commercial-grade.dtsi | 23 + arch/arm/dts/am57xx-idk-common.dtsi | 40 +- arch/arm/dts/am57xx-industrial-grade.dtsi | 23 + arch/arm/include/asm/arch-omap5/mux_dra7xx.h | 2 +- board/ti/am57xx/board.c | 105 ++- board/ti/am57xx/mux_data.h | 926 +++++++++++++++++++-------- configs/am57xx_evm_defconfig | 2 +- include/configs/ti_armv7_common.h | 2 +- include/configs/ti_omap5_common.h | 6 + 15 files changed, 1526 insertions(+), 1007 deletions(-) create mode 100644 arch/arm/dts/am571x-idk.dts create mode 100644 arch/arm/dts/am57xx-beagle-x15-common.dtsi create mode 100644 arch/arm/dts/am57xx-beagle-x15-revb1.dts create mode 100644 arch/arm/dts/am57xx-commercial-grade.dtsi create mode 100644 arch/arm/dts/am57xx-industrial-grade.dtsi -- 2.10.1

2 30

[U-Boot] [PATCH v2 0/4] dm: Update on serial driver progress
by Simon Glass 05 Dec '16

05 Dec '16

Only two serial drivers remain to be converted. This series drops one of those, since the boards appear to be unmaintained. Thank you to Marcel Ziswiler for converting the pxa serial driver. With this, only blackfin remains. The blackfin driver probably needs to be converted as there is recent activity with these boards. I am copying the maintainer so that this work can be completed. Changes in v2: - Drop the pxa patches since it is now converted Simon Glass (4): serial: Update docs to indicate mcfuart supports DM_SERIAL arm: Remove smdk2410 board arm: Remove VCMA9 board serial: Drop the s3c24x0 serial driver arch/arm/Kconfig | 10 - board/mpl/common/common_util.c | 23 -- board/mpl/vcma9/Kconfig | 15 - board/mpl/vcma9/MAINTAINERS | 6 - board/mpl/vcma9/Makefile | 11 - board/mpl/vcma9/cmd_vcma9.c | 119 -------- board/mpl/vcma9/lowlevel_init.S | 500 --------------------------------- board/mpl/vcma9/vcma9.c | 209 -------------- board/mpl/vcma9/vcma9.h | 28 -- board/samsung/smdk2410/Kconfig | 15 - board/samsung/smdk2410/MAINTAINERS | 6 - board/samsung/smdk2410/Makefile | 9 - board/samsung/smdk2410/lowlevel_init.S | 146 ---------- board/samsung/smdk2410/smdk2410.c | 139 --------- configs/VCMA9_defconfig | 17 -- configs/smdk2410_defconfig | 18 -- doc/driver-model/serial-howto.txt | 2 - drivers/serial/Makefile | 1 - drivers/serial/serial_s3c24x0.c | 208 -------------- include/configs/VCMA9.h | 205 -------------- include/configs/smdk2410.h | 180 ------------ scripts/config_whitelist.txt | 4 - 22 files changed, 1871 deletions(-) delete mode 100644 board/mpl/vcma9/Kconfig delete mode 100644 board/mpl/vcma9/MAINTAINERS delete mode 100644 board/mpl/vcma9/Makefile delete mode 100644 board/mpl/vcma9/cmd_vcma9.c delete mode 100644 board/mpl/vcma9/lowlevel_init.S delete mode 100644 board/mpl/vcma9/vcma9.c delete mode 100644 board/mpl/vcma9/vcma9.h delete mode 100644 board/samsung/smdk2410/Kconfig delete mode 100644 board/samsung/smdk2410/MAINTAINERS delete mode 100644 board/samsung/smdk2410/Makefile delete mode 100644 board/samsung/smdk2410/lowlevel_init.S delete mode 100644 board/samsung/smdk2410/smdk2410.c delete mode 100644 configs/VCMA9_defconfig delete mode 100644 configs/smdk2410_defconfig delete mode 100644 drivers/serial/serial_s3c24x0.c delete mode 100644 include/configs/VCMA9.h delete mode 100644 include/configs/smdk2410.h -- 2.8.0.rc3.226.g39d4020

4 17

[U-Boot] [PATCH] post: cosmetic: fix typo
by Tomas Melin 05 Dec '16

05 Dec '16

From: Niko Mauno <niko.mauno(a)vaisala.com> Change 'date' to 'data'. Signed-off-by: Tomas Melin <tomas.melin(a)vaisala.com> --- post/drivers/memory.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/post/drivers/memory.c b/post/drivers/memory.c index d512fa5..89725fa 100644 --- a/post/drivers/memory.c +++ b/post/drivers/memory.c @@ -234,7 +234,7 @@ static int memory_post_dataline(unsigned long long * pmem) hi = (temp64>>32) & 0xffffffff; lo = temp64 & 0xffffffff; - post_log("Memory (date line) error at %08x, " + post_log("Memory (data line) error at %08x, " "wrote %08x%08x, read %08x%08x !\n", pmem, pathi, patlo, hi, lo); ret = -1; -- 2.1.4

2 1

[U-Boot] [PATCH 00/11] ARM: ti: dra71: Add support for dra71-evm
by Lokesh Vutla 05 Dec '16

05 Dec '16

This series adds support for dra71-evm. This is dependent on the OPP kconfig support series posted recently[1]. Testing: dra71-evm: http://pastebin.ubuntu.com/23521081/ dra72-evm-revc: http://pastebin.ubuntu.com/23521117/ dra7-evm: http://pastebin.ubuntu.com/23521091/ [1] https://www.mail-archive.com/u-boot@lists.denx.de/msg231685.html Keerthy (2): board: ti: dra71x-evm: Add PMIC support configs: dra7xx: Enable lp873x options Lokesh Vutla (7): board: ti: dra71x-evm: Add epprom support board: ti: dra71x-evm: Add mux settings ARM: OMAP4+: Add support for getting pbias info from board ARM: dts: dra7xx: sync DT with latest Linux ARM: dts: dra71x-evm: Add DT support configs: dra7xx: hs: Enable DM_ETH configs: dra7xx: Enable pmic/regulator options Nishanth Menon (2): board: ti: dra72: Introduce optimization for rgmii timing for rev C configs: ti_omap5_common: Select dtb name for dra71x arch/arm/dts/Makefile | 2 +- arch/arm/dts/dra7-dspeve-thermal.dtsi | 27 ++ arch/arm/dts/dra7-evm.dts | 507 ++++++++++++++++------ arch/arm/dts/dra7-iva-thermal.dtsi | 27 ++ arch/arm/dts/dra7.dtsi | 717 ++++++++++++++++++++++++++------ arch/arm/dts/dra71-evm.dts | 230 ++++++++++ arch/arm/dts/dra72-evm-common.dtsi | 353 +++++++++------- arch/arm/dts/dra72-evm-revc.dts | 30 +- arch/arm/dts/dra72-evm-tps65917.dtsi | 134 ++++++ arch/arm/dts/dra72-evm.dts | 37 +- arch/arm/dts/dra7xx-clocks.dtsi | 425 ++++++++++--------- arch/arm/include/asm/arch-omap5/clock.h | 8 + arch/arm/include/asm/omap_common.h | 1 + arch/arm/include/asm/omap_mmc.h | 2 +- arch/arm/mach-omap2/omap4/hwinit.c | 13 + arch/arm/mach-omap2/omap5/hw_data.c | 16 + arch/arm/mach-omap2/omap5/hwinit.c | 34 ++ board/ti/dra7xx/evm.c | 69 ++- board/ti/dra7xx/mux_data.h | 275 ++++++++++-- configs/dra7xx_evm_defconfig | 6 +- configs/dra7xx_hs_evm_defconfig | 10 +- drivers/mmc/omap_hsmmc.c | 33 +- drivers/power/palmas.c | 21 +- include/configs/ti_omap5_common.h | 2 + include/dt-bindings/clk/ti-dra7-atl.h | 40 ++ include/dt-bindings/pinctrl/dra.h | 26 ++ include/palmas.h | 13 +- 27 files changed, 2354 insertions(+), 704 deletions(-) create mode 100644 arch/arm/dts/dra7-dspeve-thermal.dtsi create mode 100644 arch/arm/dts/dra7-iva-thermal.dtsi create mode 100644 arch/arm/dts/dra71-evm.dts create mode 100644 arch/arm/dts/dra72-evm-tps65917.dtsi create mode 100644 include/dt-bindings/clk/ti-dra7-atl.h -- 2.10.1

2 33

[U-Boot] [PATCH v2 0/3] ARM: DRA7: Add Kconfig support for selecting OPPs
by Lokesh Vutla 05 Dec '16

05 Dec '16

This series adds support for selecting DSPEVE, IVA, GPU OPPs via Kconfig and fixup DT clock nodes as required. Changes since v1: - Added help option for Kconfig entries. Lokesh Vutla (1): ARM: OMAP4+: Add support for dynamically selecting OPPs Suman Anna (2): ARM: DRA7: Redefine voltage and efuse macros per OPP using Kconfig ARM: DRA7: Fixup DSPEVE, IVA and GPU clock frequencies based on OPP arch/arm/include/asm/arch-omap5/clock.h | 47 ++++++++--- arch/arm/include/asm/omap_common.h | 23 +++++- arch/arm/mach-omap2/clocks-common.c | 116 ++++++++++++++++----------- arch/arm/mach-omap2/omap4/hw_data.c | 24 +++--- arch/arm/mach-omap2/omap5/Kconfig | 93 ++++++++++++++++++++++ arch/arm/mach-omap2/omap5/fdt.c | 136 ++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/omap5/hw_data.c | 12 +-- board/ti/am57xx/board.c | 92 ++++++++++++++++----- board/ti/dra7xx/evm.c | 91 ++++++++++++++++----- 9 files changed, 517 insertions(+), 117 deletions(-) -- 2.10.1

2 9

[U-Boot] [U-BOOT][TEST PATCH 0/5] Cosmetic modifications api_storage.c
by Walt Feasel 05 Dec '16

05 Dec '16

Make various checkpatch style modifications for api_storage.c to include: Align parenthesis Blank line after { Line over 80 char Comment style Spelling correction Walt Feasel (5): Cosmetic api: api_storage.c Align parenthesis Cosmetic api: api_storage.c Blank line after { Cosmetic api: api_storage.c Line over 80 char Cosmetic api: api_storage.c Comment style Cosmetic api: api_storage.c Spelling correction api/api_storage.c | 42 +++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-) -- This patch series is to verify a correct patch submission. Please let me know if there is a problem or preferred wording for submitting cosmetic patches. 2.1.4

2 11

[U-Boot] [PATCH] defconfig: am43xx_evm: Enable DM_SPI and DM_SPI_FLASH
by Vignesh R 05 Dec '16

05 Dec '16

Commit 4c4e3b37750f3("ARM: AM43xx: Enable FIT") accidentally disabled DM_SPI and DM_SPI_FLASH. Add back DM_SPI and DM_SPI_FLASH to am43xx_evm_defconfig in order to make use of DM framework for QSPI. Signed-off-by: Vignesh R <vigneshr(a)ti.com> --- configs/am43xx_evm_defconfig | 2 ++ configs/am43xx_hs_evm_defconfig | 2 ++ 2 files changed, 4 insertions(+) diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig index 443e1fb6bfc2..e596106e1326 100644 --- a/configs/am43xx_evm_defconfig +++ b/configs/am43xx_evm_defconfig @@ -51,6 +51,8 @@ CONFIG_SPI_FLASH_MACRONIX=y CONFIG_DM_ETH=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y +CONFIG_DM_SPI=y +CONFIG_DM_SPI_FLASH=y CONFIG_TI_QSPI=y CONFIG_TIMER=y CONFIG_OMAP_TIMER=y diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig index 1c538774b0a9..582866daa11c 100644 --- a/configs/am43xx_hs_evm_defconfig +++ b/configs/am43xx_hs_evm_defconfig @@ -52,6 +52,8 @@ CONFIG_SPI_FLASH_MACRONIX=y CONFIG_DM_ETH=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y +CONFIG_DM_SPI=y +CONFIG_DM_SPI_FLASH=y CONFIG_TI_QSPI=y CONFIG_TIMER=y CONFIG_OMAP_TIMER=y -- 2.10.2

4 3

[U-Boot] [PATCH] common: image: Remove FIT header update from image post-processing
by Andrew F. Davis 05 Dec '16

05 Dec '16

After an image is selected out of a FIT blob for further processing we run an optional, platform specific, post-processing function on this component. This post-processing may modify the position and size of the image, so after post-processing we update the location and size for this image in the FIT header. This can cause problems as the position of subsequent components in the FIT blob are only referenced by relative position to the end of the last component. When we resize or move a component the following components position will be calculated incorrectly. To fix this, we do not update the FIT header but instead only update our local understanding of the image data. This also allows us to re-run post-processing steps if needed. Signed-off-by: Andrew F. Davis <afd(a)ti.com> Tested-by: Carlos Hernandez <ceh(a)ti.com> --- common/image-fit.c | 29 ++++++----------------------- 1 file changed, 6 insertions(+), 23 deletions(-) diff --git a/common/image-fit.c b/common/image-fit.c index 77dc011..23b9c54 100644 --- a/common/image-fit.c +++ b/common/image-fit.c @@ -1505,12 +1505,6 @@ void fit_conf_print(const void *fit, int noffset, const char *p) static int fit_image_select(const void *fit, int rd_noffset, int verify) { -#if !defined(USE_HOSTCC) && defined(CONFIG_FIT_IMAGE_POST_PROCESS) - const void *data; - size_t size; - int ret; -#endif - fit_image_print(fit, rd_noffset, " "); if (verify) { @@ -1522,23 +1516,6 @@ static int fit_image_select(const void *fit, int rd_noffset, int verify) puts("OK\n"); } -#if !defined(USE_HOSTCC) && defined(CONFIG_FIT_IMAGE_POST_PROCESS) - ret = fit_image_get_data(fit, rd_noffset, &data, &size); - if (ret) - return ret; - - /* perform any post-processing on the image data */ - board_fit_image_post_process((void **)&data, &size); - - /* - * update U-Boot's understanding of the "data" property start address - * and size according to the performed post-processing - */ - ret = fdt_setprop((void *)fit, rd_noffset, FIT_DATA_PROP, data, size); - if (ret) - return ret; -#endif - return 0; } @@ -1738,6 +1715,12 @@ int fit_image_load(bootm_headers_t *images, ulong addr, bootstage_error(bootstage_id + BOOTSTAGE_SUB_GET_DATA); return -ENOENT; } + +#if !defined(USE_HOSTCC) && defined(CONFIG_FIT_IMAGE_POST_PROCESS) + /* perform any post-processing on the image data */ + board_fit_image_post_process((void **)&buf, &size); +#endif + len = (ulong)size; /* verify that image data is a proper FDT blob */ -- 2.10.2

4 3