October 2016 - U-Boot

[U-Boot] [PATCH] Add support for the topic-miami system-on-modules and carrier boards
by Mike Looijmans 06 Oct '16

06 Oct '16

The topic-miami SoMs contain a Zynq xc7z015 or xc7z030 SoC, 1GB DDR3L RAM, 32MB QSPI NOR flash and 256MB NAND flash. The topic-miamiplus SoMs contain a Zynq xc7z035, xc7z045 or xc7z100 SoC, 2x 1GB DDR3L RAM, 64MB dual-parallel QSPI flash, clock sources and a fan controller. The "Florida" carrier boards add SD, USB, ethernet and other interfaces. Signed-off-by: Mike Looijmans <mike.looijmans(a)topic.nl> --- Note: Requires these patches: mach-zynq/Kconfig: Make SYS_VENDOR configurable tools: mkimage: Add support for initialization table for Zynq and ZynqMP arch/arm/dts/Makefile | 2 + arch/arm/dts/zynq-topic-miami.dts | 97 +++++++++ arch/arm/dts/zynq-topic-miamiplus.dts | 17 ++ board/topic/zynq/MAINTAINERS | 6 + board/topic/zynq/Makefile | 10 + board/topic/zynq/board.c | 1 + board/topic/zynq/ps7_init_common.c | 117 +++++++++++ board/topic/zynq/ps7_init_gpl.h | 34 +++ board/topic/zynq/zynq-topic-miami/ps7_init_gpl.c | 227 ++++++++++++++++++++ board/topic/zynq/zynq-topic-miami/ps7_regs.txt | 61 ++++++ .../topic/zynq/zynq-topic-miamiplus/ps7_init_gpl.c | 233 +++++++++++++++++++++ board/topic/zynq/zynq-topic-miamiplus/ps7_regs.txt | 61 ++++++ configs/topic_miami_defconfig | 48 +++++ configs/topic_miamiplus_defconfig | 48 +++++ include/configs/topic_miami.h | 149 +++++++++++++ include/configs/topic_miamiplus.h | 2 + 16 files changed, 1113 insertions(+) create mode 100644 arch/arm/dts/zynq-topic-miami.dts create mode 100644 arch/arm/dts/zynq-topic-miamiplus.dts create mode 100644 board/topic/zynq/MAINTAINERS create mode 100644 board/topic/zynq/Makefile create mode 100644 board/topic/zynq/board.c create mode 100644 board/topic/zynq/ps7_init_common.c create mode 100644 board/topic/zynq/ps7_init_gpl.h create mode 100644 board/topic/zynq/zynq-topic-miami/ps7_init_gpl.c create mode 100644 board/topic/zynq/zynq-topic-miami/ps7_regs.txt create mode 100644 board/topic/zynq/zynq-topic-miamiplus/ps7_init_gpl.c create mode 100644 board/topic/zynq/zynq-topic-miamiplus/ps7_regs.txt create mode 100644 configs/topic_miami_defconfig create mode 100644 configs/topic_miamiplus_defconfig create mode 100644 include/configs/topic_miami.h create mode 100644 include/configs/topic_miamiplus.h diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 032c5ae..92bba73 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -97,6 +97,8 @@ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \ zynq-zybo.dtb \ zynq-microzed.dtb \ zynq-picozed.dtb \ + zynq-topic-miami.dtb \ + zynq-topic-miamiplus.dtb \ zynq-zc770-xm010.dtb \ zynq-zc770-xm011.dtb \ zynq-zc770-xm012.dtb \ diff --git a/arch/arm/dts/zynq-topic-miami.dts b/arch/arm/dts/zynq-topic-miami.dts new file mode 100644 index 0000000..8e988f9 --- /dev/null +++ b/arch/arm/dts/zynq-topic-miami.dts @@ -0,0 +1,97 @@ +/* + * Topic Miami board DTS + * + * Copyright (C) 2014-2016 Topic Embedded Products + * + * SPDX-License-Identifier: GPL-2.0+ + */ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + model = "Topic Miami Zynq Board"; + compatible = "topic,miami", "xlnx,zynq-7000"; + + aliases { + ethernet0 = &gem0; + serial0 = &uart0; + spi0 = &qspi; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci0; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&qspi { + u-boot,dm-pre-reloc; + status = "okay"; + is-dual = <0>; + num-cs = <1>; + flash@0 { + compatible = "st,m25p80", "n25q256a"; + m25p,fast-read; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <100000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@qspi-u-boot-spl { + label = "qspi-u-boot-spl"; + reg = <0x00000 0x10000>; + }; + partition@qspi-u-boot-img { + label = "qspi-u-boot-img"; + reg = <0x10000 0x60000>; + }; + partition@qspi-device-tree { + label = "qspi-device-tree"; + reg = <0x70000 0x10000>; + }; + partition@qspi-linux { + label = "qspi-linux"; + reg = <0x80000 0x400000>; + }; + partition@qspi-rootfs { + label = "qspi-rootfs"; + reg = <0x480000 0x1b80000>; + }; + }; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; +}; + +&clkc { + ps-clk-frequency = <33333333>; +}; + +&sdhci0 { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&uart0 { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm/dts/zynq-topic-miamiplus.dts b/arch/arm/dts/zynq-topic-miamiplus.dts new file mode 100644 index 0000000..3036f6e --- /dev/null +++ b/arch/arm/dts/zynq-topic-miamiplus.dts @@ -0,0 +1,17 @@ +/* + * Topic Miami Plus board DTS + * + * Copyright (C) 2016 Topic Embedded Products + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include "zynq-topic-miami.dts" + +/ { + model = "Topic Miami+ Zynq Board"; + compatible = "topic,miamiplus", "xlnx,zynq-7000"; +}; + +&qspi { + is-dual = <1>; +}; diff --git a/board/topic/zynq/MAINTAINERS b/board/topic/zynq/MAINTAINERS new file mode 100644 index 0000000..d795b30 --- /dev/null +++ b/board/topic/zynq/MAINTAINERS @@ -0,0 +1,6 @@ +TOPIC BOARD +M: Mike Looijmans <mike.looijmans(a)topic.nl> +S: Maintained +F: board/topic/zynq/ +F: include/configs/topic*.h +F: configs/topic_*_defconfig diff --git a/board/topic/zynq/Makefile b/board/topic/zynq/Makefile new file mode 100644 index 0000000..eaf59cd --- /dev/null +++ b/board/topic/zynq/Makefile @@ -0,0 +1,10 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := board.o + +# Remove quotes +hw-platform-y :=$(shell echo $(CONFIG_DEFAULT_DEVICE_TREE)) + +obj-$(CONFIG_SPL_BUILD) += $(hw-platform-y)/ps7_init_gpl.o ps7_init_common.o diff --git a/board/topic/zynq/board.c b/board/topic/zynq/board.c new file mode 100644 index 0000000..a95c9d1 --- /dev/null +++ b/board/topic/zynq/board.c @@ -0,0 +1 @@ +#include "../../xilinx/zynq/board.c" diff --git a/board/topic/zynq/ps7_init_common.c b/board/topic/zynq/ps7_init_common.c new file mode 100644 index 0000000..b1d45c2 --- /dev/null +++ b/board/topic/zynq/ps7_init_common.c @@ -0,0 +1,117 @@ +/* + * (c) Copyright 2010-2014 Xilinx, Inc. All rights reserved. + * (c) Copyright 2016 Topic Embedded Products. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "ps7_init_gpl.h" +#include <asm/io.h> + +/* For delay calculation using global registers*/ +#define SCU_GLOBAL_TIMER_COUNT_L32 0xF8F00200 +#define SCU_GLOBAL_TIMER_COUNT_U32 0xF8F00204 +#define SCU_GLOBAL_TIMER_CONTROL 0xF8F00208 +#define SCU_GLOBAL_TIMER_AUTO_INC 0xF8F00218 +#define APU_FREQ 666666666 + +#define PS7_MASK_POLL_TIME 100000000 + +/* IO accessors. No memory barriers desired. */ +static inline void iowrite(unsigned long val, unsigned long addr) +{ + __raw_writel(val, addr); +} + +static inline unsigned long ioread(unsigned long addr) +{ + return __raw_readl(addr); +} + +/* start timer */ +static void perf_start_clock(void) +{ + iowrite((1 << 0) | /* Timer Enable */ + (1 << 3) | /* Auto-increment */ + (0 << 8), /* Pre-scale */ + SCU_GLOBAL_TIMER_CONTROL); +} + +/* Compute mask for given delay in miliseconds*/ +static int get_number_of_cycles_for_delay(unsigned int delay) +{ + return (APU_FREQ / (2 * 1000)) * delay; +} + +/* stop timer */ +static void perf_disable_clock(void) +{ + iowrite(0, SCU_GLOBAL_TIMER_CONTROL); +} + +/* stop timer and reset timer count regs */ +static void perf_reset_clock(void) +{ + perf_disable_clock(); + iowrite(0, SCU_GLOBAL_TIMER_COUNT_L32); + iowrite(0, SCU_GLOBAL_TIMER_COUNT_U32); +} + +static void perf_reset_and_start_timer(void) +{ + perf_reset_clock(); + perf_start_clock(); +} + +int ps7_config(unsigned long *ps7_config_init) +{ + unsigned long *ptr = ps7_config_init; + unsigned long opcode; + unsigned long addr; + unsigned long val; + unsigned long mask; + unsigned int numargs; + int i; + int delay; + + for (;;) { + opcode = ptr[0]; + if (opcode == OPCODE_EXIT) + return PS7_INIT_SUCCESS; + addr = (opcode & OPCODE_ADDRESS_MASK); + + switch (opcode & ~OPCODE_ADDRESS_MASK) { + case OPCODE_MASKWRITE: + numargs = 3; + mask = ptr[1]; + val = ptr[2]; + iowrite((ioread(addr) & ~mask) | (val & mask), addr); + break; + + case OPCODE_MASKPOLL: + numargs = 2; + mask = ptr[1]; + i = 0; + while (!(ioread(addr) & mask)) { + if (i == PS7_MASK_POLL_TIME) + return PS7_INIT_TIMEOUT; + i++; + } + break; + + case OPCODE_MASKDELAY: + numargs = 2; + mask = ptr[1]; + delay = get_number_of_cycles_for_delay(mask); + perf_reset_and_start_timer(); + while (ioread(addr) < delay) + ; + break; + + default: + return PS7_INIT_CORRUPT; + } + + ptr += numargs; + } +} diff --git a/board/topic/zynq/ps7_init_gpl.h b/board/topic/zynq/ps7_init_gpl.h new file mode 100644 index 0000000..ef719ac --- /dev/null +++ b/board/topic/zynq/ps7_init_gpl.h @@ -0,0 +1,34 @@ +/* + * (c) Copyright 2010-2014 Xilinx, Inc. All rights reserved. + * (c) Copyright 2016 Topic Embedded Products. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#define OPCODE_EXIT 0U +#define OPCODE_MASKWRITE 0U +#define OPCODE_MASKPOLL 1U +#define OPCODE_MASKDELAY 2U +#define OPCODE_ADDRESS_MASK (~3U) + +/* Sentinel */ +#define EMIT_EXIT() OPCODE_EXIT +/* Opcode is in lower 2 bits of address, address is always 4-byte aligned */ +#define EMIT_MASKWRITE(addr, mask, val) OPCODE_MASKWRITE | addr, mask, val +#define EMIT_MASKPOLL(addr, mask) OPCODE_MASKPOLL | addr, mask +#define EMIT_MASKDELAY(addr, mask) OPCODE_MASKDELAY | addr, mask + +/* Returns codes of ps7_init* */ +#define PS7_INIT_SUCCESS (0) +#define PS7_INIT_CORRUPT (1) +#define PS7_INIT_TIMEOUT (2) +#define PS7_POLL_FAILED_DDR_INIT (3) +#define PS7_POLL_FAILED_DMA (4) +#define PS7_POLL_FAILED_PLL (5) + +/* Called by spl.c */ +int ps7_init(void); +int ps7_post_config(void); + +/* Defined in ps7_init_common.c */ +int ps7_config(unsigned long *ps7_config_init); diff --git a/board/topic/zynq/zynq-topic-miami/ps7_init_gpl.c b/board/topic/zynq/zynq-topic-miami/ps7_init_gpl.c new file mode 100644 index 0000000..b195d7a --- /dev/null +++ b/board/topic/zynq/zynq-topic-miami/ps7_init_gpl.c @@ -0,0 +1,227 @@ +/* + * (c) Copyright 2010-2014 Xilinx, Inc. All rights reserved. + * (c) Copyright 2016 Topic Embedded Products. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "../ps7_init_gpl.h" + +static unsigned long ps7_pll_init_data_3_0[] = { + EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU, 0x0000DF0DU), + EMIT_MASKWRITE(0XF8000110, 0x003FFFF0U, 0x000FA220U), + EMIT_MASKWRITE(0XF8000100, 0x0007F000U, 0x00028000U), + EMIT_MASKWRITE(0XF8000100, 0x00000010U, 0x00000010U), + EMIT_MASKWRITE(0XF8000100, 0x00000001U, 0x00000001U), + EMIT_MASKWRITE(0XF8000100, 0x00000001U, 0x00000000U), + EMIT_MASKPOLL(0XF800010C, 0x00000001U), + EMIT_MASKWRITE(0XF8000100, 0x00000010U, 0x00000000U), + EMIT_MASKWRITE(0XF8000120, 0x1F003F30U, 0x1F000200U), + EMIT_MASKWRITE(0XF8000114, 0x003FFFF0U, 0x0012C220U), + EMIT_MASKWRITE(0XF8000104, 0x0007F000U, 0x00020000U), + EMIT_MASKWRITE(0XF8000104, 0x00000010U, 0x00000010U), + EMIT_MASKWRITE(0XF8000104, 0x00000001U, 0x00000001U), + EMIT_MASKWRITE(0XF8000104, 0x00000001U, 0x00000000U), + EMIT_MASKPOLL(0XF800010C, 0x00000002U), + EMIT_MASKWRITE(0XF8000104, 0x00000010U, 0x00000000U), + EMIT_MASKWRITE(0XF8000124, 0xFFF00003U, 0x0C200003U), + EMIT_MASKWRITE(0XF8000118, 0x003FFFF0U, 0x00113220U), + EMIT_MASKWRITE(0XF8000108, 0x0007F000U, 0x00024000U), + EMIT_MASKWRITE(0XF8000108, 0x00000010U, 0x00000010U), + EMIT_MASKWRITE(0XF8000108, 0x00000001U, 0x00000001U), + EMIT_MASKWRITE(0XF8000108, 0x00000001U, 0x00000000U), + EMIT_MASKPOLL(0XF800010C, 0x00000004U), + EMIT_MASKWRITE(0XF8000108, 0x00000010U, 0x00000000U), + EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU, 0x0000767BU), + EMIT_EXIT(), +}; + +static unsigned long ps7_clock_init_data_3_0[] = { + EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU, 0x0000DF0DU), + EMIT_MASKWRITE(0XF8000128, 0x03F03F01U, 0x00302301U), + EMIT_MASKWRITE(0XF8000138, 0x00000011U, 0x00000011U), + EMIT_MASKWRITE(0XF800013C, 0x00000011U, 0x00000011U), + EMIT_MASKWRITE(0XF8000140, 0x03F03F71U, 0x00100141U), + EMIT_MASKWRITE(0XF8000144, 0x03F03F71U, 0x00100141U), + EMIT_MASKWRITE(0XF8000148, 0x00003F31U, 0x00000C01U), + EMIT_MASKWRITE(0XF800014C, 0x00003F31U, 0x00000601U), + EMIT_MASKWRITE(0XF8000150, 0x00003F33U, 0x00001803U), + EMIT_MASKWRITE(0XF8000154, 0x00003F33U, 0x00000C03U), + EMIT_MASKWRITE(0XF8000158, 0x00003F33U, 0x00000601U), + EMIT_MASKWRITE(0XF8000168, 0x00003F31U, 0x00000601U), + EMIT_MASKWRITE(0XF8000170, 0x03F03F30U, 0x00100C00U), + EMIT_MASKWRITE(0XF8000180, 0x03F03F30U, 0x00100C00U), + EMIT_MASKWRITE(0XF8000190, 0x03F03F30U, 0x00100600U), + EMIT_MASKWRITE(0XF80001A0, 0x03F03F30U, 0x00101800U), + EMIT_MASKWRITE(0XF80001C4, 0x00000001U, 0x00000001U), + EMIT_MASKWRITE(0XF800012C, 0x01FFCCCDU, 0x01FC4C4DU), + EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU, 0x0000767BU), + EMIT_EXIT(), +}; + +static unsigned long ps7_ddr_init_data_3_0[] = { + EMIT_MASKWRITE(0XF8006000, 0x0001FFFFU, 0x00000080U), + EMIT_MASKWRITE(0XF8006004, 0x0007FFFFU, 0x00001081U), + EMIT_MASKWRITE(0XF8006008, 0x03FFFFFFU, 0x03C0780FU), + EMIT_MASKWRITE(0XF800600C, 0x03FFFFFFU, 0x02001001U), + EMIT_MASKWRITE(0XF8006010, 0x03FFFFFFU, 0x00014001U), + EMIT_MASKWRITE(0XF8006014, 0x001FFFFFU, 0x0004281AU), + EMIT_MASKWRITE(0XF8006018, 0xF7FFFFFFU, 0x44E458D2U), + EMIT_MASKWRITE(0XF800601C, 0xFFFFFFFFU, 0x720238E5U), + EMIT_MASKWRITE(0XF8006020, 0x7FDFFFFCU, 0x270872D0U), + EMIT_MASKWRITE(0XF8006024, 0x0FFFFFC3U, 0x00000000U), + EMIT_MASKWRITE(0XF8006028, 0x00003FFFU, 0x00002007U), + EMIT_MASKWRITE(0XF800602C, 0xFFFFFFFFU, 0x00000008U), + EMIT_MASKWRITE(0XF8006030, 0xFFFFFFFFU, 0x00040930U), + EMIT_MASKWRITE(0XF8006034, 0x13FF3FFFU, 0x000116D4U), + EMIT_MASKWRITE(0XF8006038, 0x00000003U, 0x00000000U), + EMIT_MASKWRITE(0XF800603C, 0x000FFFFFU, 0x00000777U), + EMIT_MASKWRITE(0XF8006040, 0xFFFFFFFFU, 0xFFF00000U), + EMIT_MASKWRITE(0XF8006044, 0x0FFFFFFFU, 0x0F666666U), + EMIT_MASKWRITE(0XF8006048, 0x0003F03FU, 0x0003C008U), + EMIT_MASKWRITE(0XF8006050, 0xFF0F8FFFU, 0x77010800U), + EMIT_MASKWRITE(0XF8006058, 0x00010000U, 0x00000000U), + EMIT_MASKWRITE(0XF800605C, 0x0000FFFFU, 0x00005003U), + EMIT_MASKWRITE(0XF8006060, 0x000017FFU, 0x0000003EU), + EMIT_MASKWRITE(0XF8006064, 0x00021FE0U, 0x00020000U), + EMIT_MASKWRITE(0XF8006068, 0x03FFFFFFU, 0x00284141U), + EMIT_MASKWRITE(0XF800606C, 0x0000FFFFU, 0x00001610U), + EMIT_MASKWRITE(0XF8006078, 0x03FFFFFFU, 0x00466111U), + EMIT_MASKWRITE(0XF800607C, 0x000FFFFFU, 0x00032222U), + EMIT_MASKWRITE(0XF80060A4, 0xFFFFFFFFU, 0x10200802U), + EMIT_MASKWRITE(0XF80060A8, 0x0FFFFFFFU, 0x0690CB73U), + EMIT_MASKWRITE(0XF80060AC, 0x000001FFU, 0x000001FEU), + EMIT_MASKWRITE(0XF80060B0, 0x1FFFFFFFU, 0x1CFFFFFFU), + EMIT_MASKWRITE(0XF80060B4, 0x00000200U, 0x00000200U), + EMIT_MASKWRITE(0XF80060B8, 0x01FFFFFFU, 0x00200066U), + EMIT_MASKWRITE(0XF80060C4, 0x00000003U, 0x00000003U), + EMIT_MASKWRITE(0XF80060C4, 0x00000003U, 0x00000000U), + EMIT_MASKWRITE(0XF80060C8, 0x000000FFU, 0x00000000U), + EMIT_MASKWRITE(0XF80060DC, 0x00000001U, 0x00000000U), + EMIT_MASKWRITE(0XF80060F0, 0x0000FFFFU, 0x00000000U), + EMIT_MASKWRITE(0XF80060F4, 0x0000000FU, 0x00000008U), + EMIT_MASKWRITE(0XF8006114, 0x000000FFU, 0x00000000U), + EMIT_MASKWRITE(0XF8006118, 0x7FFFFFCFU, 0x40000001U), + EMIT_MASKWRITE(0XF800611C, 0x7FFFFFCFU, 0x40000001U), + EMIT_MASKWRITE(0XF8006120, 0x7FFFFFCFU, 0x40000001U), + EMIT_MASKWRITE(0XF8006124, 0x7FFFFFCFU, 0x40000001U), + EMIT_MASKWRITE(0XF800612C, 0x000FFFFFU, 0x00025010U), + EMIT_MASKWRITE(0XF8006130, 0x000FFFFFU, 0x00026400U), + EMIT_MASKWRITE(0XF8006134, 0x000FFFFFU, 0x00029418U), + EMIT_MASKWRITE(0XF8006138, 0x000FFFFFU, 0x00027820U), + EMIT_MASKWRITE(0XF8006140, 0x000FFFFFU, 0x00000035U), + EMIT_MASKWRITE(0XF8006144, 0x000FFFFFU, 0x00000035U), + EMIT_MASKWRITE(0XF8006148, 0x000FFFFFU, 0x00000035U), + EMIT_MASKWRITE(0XF800614C, 0x000FFFFFU, 0x00000035U), + EMIT_MASKWRITE(0XF8006154, 0x000FFFFFU, 0x00000090U), + EMIT_MASKWRITE(0XF8006158, 0x000FFFFFU, 0x00000080U), + EMIT_MASKWRITE(0XF800615C, 0x000FFFFFU, 0x00000098U), + EMIT_MASKWRITE(0XF8006160, 0x000FFFFFU, 0x000000A0U), + EMIT_MASKWRITE(0XF8006168, 0x001FFFFFU, 0x000000E9U), + EMIT_MASKWRITE(0XF800616C, 0x001FFFFFU, 0x000000EEU), + EMIT_MASKWRITE(0XF8006170, 0x001FFFFFU, 0x000000FAU), + EMIT_MASKWRITE(0XF8006174, 0x001FFFFFU, 0x000000F3U), + EMIT_MASKWRITE(0XF800617C, 0x000FFFFFU, 0x000000D0U), + EMIT_MASKWRITE(0XF8006180, 0x000FFFFFU, 0x000000C0U), + EMIT_MASKWRITE(0XF8006184, 0x000FFFFFU, 0x000000D8U), + EMIT_MASKWRITE(0XF8006188, 0x000FFFFFU, 0x000000E0U), + EMIT_MASKWRITE(0XF8006190, 0x6FFFFEFEU, 0x00040080U), + EMIT_MASKWRITE(0XF8006194, 0x000FFFFFU, 0x0001FC82U), + EMIT_MASKWRITE(0XF8006204, 0xFFFFFFFFU, 0x00000000U), + EMIT_MASKWRITE(0XF8006208, 0x000703FFU, 0x000003FFU), + EMIT_MASKWRITE(0XF800620C, 0x000703FFU, 0x000003FFU), + EMIT_MASKWRITE(0XF8006210, 0x000703FFU, 0x000003FFU), + EMIT_MASKWRITE(0XF8006214, 0x000703FFU, 0x000003FFU), + EMIT_MASKWRITE(0XF8006218, 0x000F03FFU, 0x000003FFU), + EMIT_MASKWRITE(0XF800621C, 0x000F03FFU, 0x000003FFU), + EMIT_MASKWRITE(0XF8006220, 0x000F03FFU, 0x000003FFU), + EMIT_MASKWRITE(0XF8006224, 0x000F03FFU, 0x000003FFU), + EMIT_MASKWRITE(0XF80062A8, 0x00000FF5U, 0x00000000U), + EMIT_MASKWRITE(0XF80062AC, 0xFFFFFFFFU, 0x00000000U), + EMIT_MASKWRITE(0XF80062B0, 0x003FFFFFU, 0x00005125U), + EMIT_MASKWRITE(0XF80062B4, 0x0003FFFFU, 0x000012A8U), + EMIT_MASKPOLL(0XF8000B74, 0x00002000U), + EMIT_MASKWRITE(0XF8006000, 0x0001FFFFU, 0x00000081U), + EMIT_MASKPOLL(0XF8006054, 0x00000007U), + EMIT_EXIT(), +}; + +static unsigned long ps7_mio_init_data_3_0[] = { + EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU, 0x0000DF0DU), + EMIT_MASKWRITE(0XF8000B40, 0x00000FFFU, 0x00000600U), + EMIT_MASKWRITE(0XF8000B44, 0x00000FFFU, 0x00000600U), + EMIT_MASKWRITE(0XF8000B48, 0x00000FFFU, 0x00000672U), + EMIT_MASKWRITE(0XF8000B4C, 0x00000FFFU, 0x00000672U), + EMIT_MASKWRITE(0XF8000B50, 0x00000FFFU, 0x00000674U), + EMIT_MASKWRITE(0XF8000B54, 0x00000FFFU, 0x00000674U), + EMIT_MASKWRITE(0XF8000B58, 0x00000FFFU, 0x00000600U), + EMIT_MASKWRITE(0XF8000B5C, 0xFFFFFFFFU, 0x0018C61CU), + EMIT_MASKWRITE(0XF8000B60, 0xFFFFFFFFU, 0x00F9861CU), + EMIT_MASKWRITE(0XF8000B64, 0xFFFFFFFFU, 0x00F9861CU), + EMIT_MASKWRITE(0XF8000B68, 0xFFFFFFFFU, 0x00F9861CU), + EMIT_MASKWRITE(0XF8000B6C, 0x00007FFFU, 0x00000E60U), + EMIT_MASKWRITE(0XF8000B70, 0x00000001U, 0x00000001U), + EMIT_MASKWRITE(0XF8000B70, 0x00000021U, 0x00000020U), + EMIT_MASKWRITE(0XF8000B70, 0x07FEFFFFU, 0x00000823U), + EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU, 0x0000767BU), + EMIT_EXIT(), +}; + +static unsigned long ps7_peripherals_init_data_3_0[] = { + EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU, 0x0000DF0DU), + EMIT_MASKWRITE(0XF8000B48, 0x00000180U, 0x00000180U), + EMIT_MASKWRITE(0XF8000B4C, 0x00000180U, 0x00000180U), + EMIT_MASKWRITE(0XF8000B50, 0x00000180U, 0x00000180U), + EMIT_MASKWRITE(0XF8000B54, 0x00000180U, 0x00000180U), + EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU, 0x0000767BU), + EMIT_MASKWRITE(0XE0001034, 0x000000FFU, 0x00000006U), + EMIT_MASKWRITE(0XE0001018, 0x0000FFFFU, 0x0000007CU), + EMIT_MASKWRITE(0XE0001000, 0x000001FFU, 0x00000017U), + EMIT_MASKWRITE(0XE0001004, 0x000003FFU, 0x00000020U), + EMIT_MASKWRITE(0XE0000034, 0x000000FFU, 0x00000006U), + EMIT_MASKWRITE(0XE0000018, 0x0000FFFFU, 0x0000007CU), + EMIT_MASKWRITE(0XE0000000, 0x000001FFU, 0x00000017U), + EMIT_MASKWRITE(0XE0000004, 0x000003FFU, 0x00000020U), + EMIT_MASKWRITE(0XE000D000, 0x000800FFU, 0x000800C1U), + EMIT_MASKWRITE(0XF8007000, 0x20000000U, 0x00000000U), + EMIT_MASKDELAY(0XF8F00200, 1), + EMIT_MASKDELAY(0XF8F00200, 1), + EMIT_MASKDELAY(0XF8F00200, 1), + EMIT_EXIT(), +}; + +static unsigned long ps7_post_config_3_0[] = { + EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU, 0x0000DF0DU), + EMIT_MASKWRITE(0XF8000900, 0x0000000FU, 0x0000000FU), + EMIT_MASKWRITE(0XF8000240, 0xFFFFFFFFU, 0x00000000U), + EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU, 0x0000767BU), + EMIT_EXIT(), +}; + +int ps7_init(void) +{ + int ret; + + ret = ps7_config(ps7_mio_init_data_3_0); + if (ret != PS7_INIT_SUCCESS) + return ret; + ret = ps7_config(ps7_pll_init_data_3_0); + if (ret != PS7_INIT_SUCCESS) + return ret; + ret = ps7_config(ps7_clock_init_data_3_0); + if (ret != PS7_INIT_SUCCESS) + return ret; + ret = ps7_config(ps7_ddr_init_data_3_0); + if (ret != PS7_INIT_SUCCESS) + return ret; + ret = ps7_config(ps7_peripherals_init_data_3_0); + if (ret != PS7_INIT_SUCCESS) + return ret; + + return PS7_INIT_SUCCESS; +} + +int ps7_post_config(void) +{ + return ps7_config(ps7_post_config_3_0); +} diff --git a/board/topic/zynq/zynq-topic-miami/ps7_regs.txt b/board/topic/zynq/zynq-topic-miami/ps7_regs.txt new file mode 100644 index 0000000..2ad9da6 --- /dev/null +++ b/board/topic/zynq/zynq-topic-miami/ps7_regs.txt @@ -0,0 +1,61 @@ +0xF8000120 0x1F000200 // ARM_CLK_CTRL - divisor = 2 433 MHz (?) +0xf8000700 0x1210 // MIO configuration +0xf8000704 0x202 +0xf8000708 0x202 +0xf800070c 0x202 +0xf8000710 0x202 +0xf8000714 0x202 +0xf8000718 0x202 +0xf800071c 0x210 +0xf8000720 0x202 +0xf8000724 0x1210 +0xf8000728 0x1210 +0xf800072c 0x1210 +0xf8000730 0x1210 +0xf8000734 0x1210 +0xf8000738 0x1211 +0xf800073c 0x1200 +0xf8000740 0x1210 +0xf8000744 0x1210 +0xf8000748 0x1210 +0xf800074c 0x1210 +0xf8000750 0x1210 +0xf8000754 0x1210 +0xf8000758 0x1210 +0xf800075c 0x1210 +0xf8000760 0x1201 +0xf8000764 0x200 +0xf8000768 0x12e1 +0xf800076c 0x2e0 +0xf8000770 0x304 +0xf8000774 0x305 +0xf8000778 0x304 +0xf800077c 0x305 +0xf8000780 0x304 +0xf8000784 0x304 +0xf8000788 0x304 +0xf800078c 0x304 +0xf8000790 0x305 +0xf8000794 0x304 +0xf8000798 0x304 +0xf800079c 0x304 +0xf80007a0 0x380 +0xf80007a4 0x380 +0xf80007a8 0x380 +0xf80007ac 0x380 +0xf80007b0 0x380 +0xf80007b4 0x380 +0xf80007b8 0x1261 +0xf80007bc 0x1260 +0xf80007c0 0x1261 +0xf80007c4 0x1261 +0xf80007c8 0x1240 +0xf80007cc 0x1240 +0xf80007d0 0x1240 +0xf80007d4 0x1240 +0xf8000830 0x180037 +0xf8000834 0x3a0039 +0xF800014C 0x00000621 // LQSPI_CLK_CTRL - ARMPLL/6 (200 MHz) +0xE000D000 0x800238C1 // QSPI config - divide-by-2 +0xE000D038 0x00000020 // QSPI loopback - internal, 0 delay +0xE000D0A0 0x82FF04EB // LQSPI_CFG - QIOREAD mode, Numonyx/Micron diff --git a/board/topic/zynq/zynq-topic-miamiplus/ps7_init_gpl.c b/board/topic/zynq/zynq-topic-miamiplus/ps7_init_gpl.c new file mode 100644 index 0000000..5a92336 --- /dev/null +++ b/board/topic/zynq/zynq-topic-miamiplus/ps7_init_gpl.c @@ -0,0 +1,233 @@ +/* + * (c) Copyright 2010-2014 Xilinx, Inc. All rights reserved. + * (c) Copyright 2016 Topic Embedded Products. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "../ps7_init_gpl.h" + +static unsigned long ps7_pll_init_data_3_0[] = { + EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU, 0x0000DF0DU), + EMIT_MASKWRITE(0XF8000110, 0x003FFFF0U, 0x000FA220U), + EMIT_MASKWRITE(0XF8000100, 0x0007F000U, 0x00028000U), + EMIT_MASKWRITE(0XF8000100, 0x00000010U, 0x00000010U), + EMIT_MASKWRITE(0XF8000100, 0x00000001U, 0x00000001U), + EMIT_MASKWRITE(0XF8000100, 0x00000001U, 0x00000000U), + EMIT_MASKPOLL(0XF800010C, 0x00000001U), + EMIT_MASKWRITE(0XF8000100, 0x00000010U, 0x00000000U), + EMIT_MASKWRITE(0XF8000120, 0x1F003F30U, 0x1F000200U), + EMIT_MASKWRITE(0XF8000114, 0x003FFFF0U, 0x0012C220U), + EMIT_MASKWRITE(0XF8000104, 0x0007F000U, 0x00020000U), + EMIT_MASKWRITE(0XF8000104, 0x00000010U, 0x00000010U), + EMIT_MASKWRITE(0XF8000104, 0x00000001U, 0x00000001U), + EMIT_MASKWRITE(0XF8000104, 0x00000001U, 0x00000000U), + EMIT_MASKPOLL(0XF800010C, 0x00000002U), + EMIT_MASKWRITE(0XF8000104, 0x00000010U, 0x00000000U), + EMIT_MASKWRITE(0XF8000124, 0xFFF00003U, 0x0C200003U), + EMIT_MASKWRITE(0XF8000118, 0x003FFFF0U, 0x00113220U), + EMIT_MASKWRITE(0XF8000108, 0x0007F000U, 0x00024000U), + EMIT_MASKWRITE(0XF8000108, 0x00000010U, 0x00000010U), + EMIT_MASKWRITE(0XF8000108, 0x00000001U, 0x00000001U), + EMIT_MASKWRITE(0XF8000108, 0x00000001U, 0x00000000U), + EMIT_MASKPOLL(0XF800010C, 0x00000004U), + EMIT_MASKWRITE(0XF8000108, 0x00000010U, 0x00000000U), + EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU, 0x0000767BU), + EMIT_EXIT(), +}; + +static unsigned long ps7_clock_init_data_3_0[] = { + EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU, 0x0000DF0DU), + EMIT_MASKWRITE(0XF8000128, 0x03F03F01U, 0x00302301U), + EMIT_MASKWRITE(0XF8000138, 0x00000011U, 0x00000011U), + EMIT_MASKWRITE(0XF800013C, 0x00000011U, 0x00000011U), + EMIT_MASKWRITE(0XF8000140, 0x03F03F71U, 0x00100141U), + EMIT_MASKWRITE(0XF8000144, 0x03F03F71U, 0x00100141U), + EMIT_MASKWRITE(0XF8000148, 0x00003F31U, 0x00000C01U), + EMIT_MASKWRITE(0XF800014C, 0x00003F31U, 0x00000601U), + EMIT_MASKWRITE(0XF8000150, 0x00003F33U, 0x00001803U), + EMIT_MASKWRITE(0XF8000154, 0x00003F33U, 0x00000C03U), + EMIT_MASKWRITE(0XF8000158, 0x00003F33U, 0x00000601U), + EMIT_MASKWRITE(0XF8000168, 0x00003F31U, 0x00000601U), + EMIT_MASKWRITE(0XF8000170, 0x03F03F30U, 0x00100C00U), + EMIT_MASKWRITE(0XF8000180, 0x03F03F30U, 0x00100C00U), + EMIT_MASKWRITE(0XF8000190, 0x03F03F30U, 0x00100600U), + EMIT_MASKWRITE(0XF80001A0, 0x03F03F30U, 0x00101800U), + EMIT_MASKWRITE(0XF80001C4, 0x00000001U, 0x00000001U), + EMIT_MASKWRITE(0XF800012C, 0x01FFCCCDU, 0x01FC4C4DU), + EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU, 0x0000767BU), + EMIT_EXIT(), +}; + +static unsigned long ps7_ddr_init_data_3_0[] = { + EMIT_MASKWRITE(0XF8006000, 0x0001FFFFU, 0x00000080U), + EMIT_MASKWRITE(0XF8006004, 0x0007FFFFU, 0x00001081U), + EMIT_MASKWRITE(0XF8006008, 0x03FFFFFFU, 0x03C0780FU), + EMIT_MASKWRITE(0XF800600C, 0x03FFFFFFU, 0x02001001U), + EMIT_MASKWRITE(0XF8006010, 0x03FFFFFFU, 0x00014001U), + EMIT_MASKWRITE(0XF8006014, 0x001FFFFFU, 0x0004281AU), + EMIT_MASKWRITE(0XF8006018, 0xF7FFFFFFU, 0x44E458D2U), + EMIT_MASKWRITE(0XF800601C, 0xFFFFFFFFU, 0x720238E5U), + EMIT_MASKWRITE(0XF8006020, 0x7FDFFFFCU, 0x270872D0U), + EMIT_MASKWRITE(0XF8006024, 0x0FFFFFC3U, 0x00000000U), + EMIT_MASKWRITE(0XF8006028, 0x00003FFFU, 0x00002007U), + EMIT_MASKWRITE(0XF800602C, 0xFFFFFFFFU, 0x00000008U), + EMIT_MASKWRITE(0XF8006030, 0xFFFFFFFFU, 0x00040930U), + EMIT_MASKWRITE(0XF8006034, 0x13FF3FFFU, 0x000116D4U), + EMIT_MASKWRITE(0XF8006038, 0x00000003U, 0x00000000U), + EMIT_MASKWRITE(0XF800603C, 0x000FFFFFU, 0x00000777U), + EMIT_MASKWRITE(0XF8006040, 0xFFFFFFFFU, 0xFFF00000U), + EMIT_MASKWRITE(0XF8006044, 0x0FFFFFFFU, 0x0F666666U), + EMIT_MASKWRITE(0XF8006048, 0x0003F03FU, 0x0003C008U), + EMIT_MASKWRITE(0XF8006050, 0xFF0F8FFFU, 0x77010800U), + EMIT_MASKWRITE(0XF8006058, 0x00010000U, 0x00000000U), + EMIT_MASKWRITE(0XF800605C, 0x0000FFFFU, 0x00005003U), + EMIT_MASKWRITE(0XF8006060, 0x000017FFU, 0x0000003EU), + EMIT_MASKWRITE(0XF8006064, 0x00021FE0U, 0x00020000U), + EMIT_MASKWRITE(0XF8006068, 0x03FFFFFFU, 0x00284141U), + EMIT_MASKWRITE(0XF800606C, 0x0000FFFFU, 0x00001610U), + EMIT_MASKWRITE(0XF8006078, 0x03FFFFFFU, 0x00466111U), + EMIT_MASKWRITE(0XF800607C, 0x000FFFFFU, 0x00032222U), + EMIT_MASKWRITE(0XF80060A4, 0xFFFFFFFFU, 0x10200802U), + EMIT_MASKWRITE(0XF80060A8, 0x0FFFFFFFU, 0x0690CB73U), + EMIT_MASKWRITE(0XF80060AC, 0x000001FFU, 0x000001FEU), + EMIT_MASKWRITE(0XF80060B0, 0x1FFFFFFFU, 0x1CFFFFFFU), + EMIT_MASKWRITE(0XF80060B4, 0x00000200U, 0x00000200U), + EMIT_MASKWRITE(0XF80060B8, 0x01FFFFFFU, 0x00200066U), + EMIT_MASKWRITE(0XF80060C4, 0x00000003U, 0x00000003U), + EMIT_MASKWRITE(0XF80060C4, 0x00000003U, 0x00000000U), + EMIT_MASKWRITE(0XF80060C8, 0x000000FFU, 0x00000000U), + EMIT_MASKWRITE(0XF80060DC, 0x00000001U, 0x00000000U), + EMIT_MASKWRITE(0XF80060F0, 0x0000FFFFU, 0x00000000U), + EMIT_MASKWRITE(0XF80060F4, 0x0000000FU, 0x00000008U), + EMIT_MASKWRITE(0XF8006114, 0x000000FFU, 0x00000000U), + EMIT_MASKWRITE(0XF8006118, 0x7FFFFFCFU, 0x40000001U), + EMIT_MASKWRITE(0XF800611C, 0x7FFFFFCFU, 0x40000001U), + EMIT_MASKWRITE(0XF8006120, 0x7FFFFFCFU, 0x40000001U), + EMIT_MASKWRITE(0XF8006124, 0x7FFFFFCFU, 0x40000001U), + EMIT_MASKWRITE(0XF800612C, 0x000FFFFFU, 0x00025010U), + EMIT_MASKWRITE(0XF8006130, 0x000FFFFFU, 0x00026400U), + EMIT_MASKWRITE(0XF8006134, 0x000FFFFFU, 0x00029418U), + EMIT_MASKWRITE(0XF8006138, 0x000FFFFFU, 0x00027820U), + EMIT_MASKWRITE(0XF8006140, 0x000FFFFFU, 0x00000035U), + EMIT_MASKWRITE(0XF8006144, 0x000FFFFFU, 0x00000035U), + EMIT_MASKWRITE(0XF8006148, 0x000FFFFFU, 0x00000035U), + EMIT_MASKWRITE(0XF800614C, 0x000FFFFFU, 0x00000035U), + EMIT_MASKWRITE(0XF8006154, 0x000FFFFFU, 0x00000090U), + EMIT_MASKWRITE(0XF8006158, 0x000FFFFFU, 0x00000080U), + EMIT_MASKWRITE(0XF800615C, 0x000FFFFFU, 0x00000098U), + EMIT_MASKWRITE(0XF8006160, 0x000FFFFFU, 0x000000A0U), + EMIT_MASKWRITE(0XF8006168, 0x001FFFFFU, 0x000000E9U), + EMIT_MASKWRITE(0XF800616C, 0x001FFFFFU, 0x000000EEU), + EMIT_MASKWRITE(0XF8006170, 0x001FFFFFU, 0x000000FAU), + EMIT_MASKWRITE(0XF8006174, 0x001FFFFFU, 0x000000F3U), + EMIT_MASKWRITE(0XF800617C, 0x000FFFFFU, 0x000000D0U), + EMIT_MASKWRITE(0XF8006180, 0x000FFFFFU, 0x000000C0U), + EMIT_MASKWRITE(0XF8006184, 0x000FFFFFU, 0x000000D8U), + EMIT_MASKWRITE(0XF8006188, 0x000FFFFFU, 0x000000E0U), + EMIT_MASKWRITE(0XF8006190, 0x6FFFFEFEU, 0x00040080U), + EMIT_MASKWRITE(0XF8006194, 0x000FFFFFU, 0x0001FC82U), + EMIT_MASKWRITE(0XF8006204, 0xFFFFFFFFU, 0x00000000U), + EMIT_MASKWRITE(0XF8006208, 0x000703FFU, 0x000003FFU), + EMIT_MASKWRITE(0XF800620C, 0x000703FFU, 0x000003FFU), + EMIT_MASKWRITE(0XF8006210, 0x000703FFU, 0x000003FFU), + EMIT_MASKWRITE(0XF8006214, 0x000703FFU, 0x000003FFU), + EMIT_MASKWRITE(0XF8006218, 0x000F03FFU, 0x000003FFU), + EMIT_MASKWRITE(0XF800621C, 0x000F03FFU, 0x000003FFU), + EMIT_MASKWRITE(0XF8006220, 0x000F03FFU, 0x000003FFU), + EMIT_MASKWRITE(0XF8006224, 0x000F03FFU, 0x000003FFU), + EMIT_MASKWRITE(0XF80062A8, 0x00000FF5U, 0x00000000U), + EMIT_MASKWRITE(0XF80062AC, 0xFFFFFFFFU, 0x00000000U), + EMIT_MASKWRITE(0XF80062B0, 0x003FFFFFU, 0x00005125U), + EMIT_MASKWRITE(0XF80062B4, 0x0003FFFFU, 0x000012A8U), + EMIT_MASKPOLL(0XF8000B74, 0x00002000U), + EMIT_MASKWRITE(0XF8006000, 0x0001FFFFU, 0x00000081U), + EMIT_MASKPOLL(0XF8006054, 0x00000007U), + EMIT_EXIT(), +}; + +static unsigned long ps7_mio_init_data_3_0[] = { + EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU, 0x0000DF0DU), + EMIT_MASKWRITE(0XF8000B40, 0x00000FFFU, 0x00000600U), + EMIT_MASKWRITE(0XF8000B44, 0x00000FFFU, 0x00000600U), + EMIT_MASKWRITE(0XF8000B48, 0x00000FFFU, 0x00000672U), + EMIT_MASKWRITE(0XF8000B4C, 0x00000FFFU, 0x00000672U), + EMIT_MASKWRITE(0XF8000B50, 0x00000FFFU, 0x00000674U), + EMIT_MASKWRITE(0XF8000B54, 0x00000FFFU, 0x00000674U), + EMIT_MASKWRITE(0XF8000B58, 0x00000FFFU, 0x00000600U), + EMIT_MASKWRITE(0XF8000B5C, 0xFFFFFFFFU, 0x0018C61CU), + EMIT_MASKWRITE(0XF8000B60, 0xFFFFFFFFU, 0x00F9861CU), + EMIT_MASKWRITE(0XF8000B64, 0xFFFFFFFFU, 0x00F9861CU), + EMIT_MASKWRITE(0XF8000B68, 0xFFFFFFFFU, 0x00F9861CU), + EMIT_MASKWRITE(0XF8000B6C, 0x00007FFFU, 0x00000E60U), + EMIT_MASKWRITE(0XF8000B70, 0x00000001U, 0x00000001U), + EMIT_MASKWRITE(0XF8000B70, 0x00000021U, 0x00000020U), + EMIT_MASKWRITE(0XF8000B70, 0x07FEFFFFU, 0x00000823U), + EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU, 0x0000767BU), + EMIT_EXIT(), +}; + +static unsigned long ps7_peripherals_init_data_3_0[] = { + EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU, 0x0000DF0DU), + EMIT_MASKWRITE(0XF8000B48, 0x00000180U, 0x00000180U), + EMIT_MASKWRITE(0XF8000B4C, 0x00000180U, 0x00000180U), + EMIT_MASKWRITE(0XF8000B50, 0x00000180U, 0x00000180U), + EMIT_MASKWRITE(0XF8000B54, 0x00000180U, 0x00000180U), + EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU, 0x0000767BU), + EMIT_MASKWRITE(0XE0001034, 0x000000FFU, 0x00000006U), + EMIT_MASKWRITE(0XE0001018, 0x0000FFFFU, 0x0000007CU), + EMIT_MASKWRITE(0XE0001000, 0x000001FFU, 0x00000017U), + EMIT_MASKWRITE(0XE0001004, 0x000003FFU, 0x00000020U), + EMIT_MASKWRITE(0XE0000034, 0x000000FFU, 0x00000006U), + EMIT_MASKWRITE(0XE0000018, 0x0000FFFFU, 0x0000007CU), + EMIT_MASKWRITE(0XE0000000, 0x000001FFU, 0x00000017U), + EMIT_MASKWRITE(0XE0000004, 0x000003FFU, 0x00000020U), + EMIT_MASKWRITE(0XE000D000, 0x000800FFU, 0x000800C1U), + EMIT_MASKWRITE(0XF8007000, 0x20000000U, 0x00000000U), + EMIT_MASKDELAY(0XF8F00200, 1), + EMIT_MASKWRITE(0XE000A244, 0x003FFFFFU, 0x00004000U), + EMIT_MASKWRITE(0XE000A008, 0xFFFFFFFFU, 0xBFFF4000U), + EMIT_MASKWRITE(0XE000A248, 0x003FFFFFU, 0x00004000U), + EMIT_MASKWRITE(0XE000A008, 0xFFFFFFFFU, 0xBFFF0000U), + EMIT_MASKDELAY(0XF8F00200, 1), + EMIT_MASKWRITE(0XE000A008, 0xFFFFFFFFU, 0xBFFF4000U), + EMIT_MASKDELAY(0XF8F00200, 1), + EMIT_MASKDELAY(0XF8F00200, 1), + EMIT_EXIT(), +}; + +static unsigned long ps7_post_config_3_0[] = { + EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU, 0x0000DF0DU), + EMIT_MASKWRITE(0XF8000900, 0x0000000FU, 0x0000000FU), + EMIT_MASKWRITE(0XF8000240, 0xFFFFFFFFU, 0x00000000U), + EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU, 0x0000767BU), + EMIT_EXIT(), +}; + +int ps7_init(void) +{ + int ret; + + ret = ps7_config(ps7_mio_init_data_3_0); + if (ret != PS7_INIT_SUCCESS) + return ret; + ret = ps7_config(ps7_pll_init_data_3_0); + if (ret != PS7_INIT_SUCCESS) + return ret; + ret = ps7_config(ps7_clock_init_data_3_0); + if (ret != PS7_INIT_SUCCESS) + return ret; + ret = ps7_config(ps7_ddr_init_data_3_0); + if (ret != PS7_INIT_SUCCESS) + return ret; + ret = ps7_config(ps7_peripherals_init_data_3_0); + if (ret != PS7_INIT_SUCCESS) + return ret; + + return PS7_INIT_SUCCESS; +} + +int ps7_post_config(void) +{ + return ps7_config(ps7_post_config_3_0); +} diff --git a/board/topic/zynq/zynq-topic-miamiplus/ps7_regs.txt b/board/topic/zynq/zynq-topic-miamiplus/ps7_regs.txt new file mode 100644 index 0000000..7b102de --- /dev/null +++ b/board/topic/zynq/zynq-topic-miamiplus/ps7_regs.txt @@ -0,0 +1,61 @@ +0xF8000120 0x1F000200 // ARM_CLK_CTRL - divisor = 2 (433 MHz) +0xf8000700 0x1202 // MIO configuration +0xf8000704 0x1202 +0xf8000708 0x202 +0xf800070c 0x202 +0xf8000710 0x202 +0xf8000714 0x202 +0xf8000718 0x202 +0xf800071c 0x200 +0xf8000720 0x202 +0xf8000724 0x202 +0xf8000728 0x202 +0xf800072c 0x202 +0xf8000730 0x202 +0xf8000734 0x202 +0xf8000738 0x12e1 +0xf800073c 0x12e0 +0xf8000740 0x1202 +0xf8000744 0x1202 +0xf8000748 0x1202 +0xf800074c 0x1202 +0xf8000750 0x1202 +0xf8000754 0x1202 +0xf8000758 0x1203 +0xf800075c 0x1203 +0xf8000760 0x1203 +0xf8000764 0x203 +0xf8000768 0x1203 +0xf800076c 0x203 +0xf8000770 0x304 +0xf8000774 0x305 +0xf8000778 0x304 +0xf800077c 0x305 +0xf8000780 0x304 +0xf8000784 0x304 +0xf8000788 0x304 +0xf800078c 0x304 +0xf8000790 0x305 +0xf8000794 0x304 +0xf8000798 0x304 +0xf800079c 0x304 +0xf80007a0 0x380 +0xf80007a4 0x380 +0xf80007a8 0x380 +0xf80007ac 0x380 +0xf80007b0 0x380 +0xf80007b4 0x380 +0xf80007b8 0x1200 +0xf80007bc 0x1201 +0xf80007c0 0x1240 +0xf80007c4 0x1240 +0xf80007c8 0x1240 +0xf80007cc 0x1240 +0xf80007d0 0x1280 +0xf80007d4 0x1280 +0xf8000830 0x2f0037 +0xf8000834 0x3a0039 +0xF800014C 0x00000621 // LQSPI_CLK_CTRL - ARMPLL/6 +0xE000D000 0x800238C1 // QSPI config - divide-by-2 +0xE000D038 0x00000020 // QSPI loopback - internal, 0 delay +0xE000D0A0 0xE2FF06EB // LQSPI_CFG - Quad read, dual flash diff --git a/configs/topic_miami_defconfig b/configs/topic_miami_defconfig new file mode 100644 index 0000000..4508d6d --- /dev/null +++ b/configs/topic_miami_defconfig @@ -0,0 +1,48 @@ +CONFIG_ARM=y +CONFIG_SYS_VENDOR="topic" +CONFIG_SYS_CONFIG_NAME="topic_miami" +CONFIG_ARCH_ZYNQ=y +CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miami/ps7_regs.txt" +CONFIG_DEFAULT_DEVICE_TREE="zynq-topic-miami" +CONFIG_SPL=y +CONFIG_BOOTDELAY=0 +CONFIG_SYS_NO_FLASH=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="zynq-uboot> " +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +CONFIG_CMD_DFU=y +CONFIG_CMD_GPIO=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_EMBED=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_ZYNQ_SDHCI=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_STMICRO=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +# CONFIG_NETDEVICES is not set +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_BASE=0xe0000000 +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_ZYNQ_QSPI=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_CI_UDC=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_G_DNL_MANUFACTURER="Xilinx" +CONFIG_G_DNL_VENDOR_NUM=0x03fd +CONFIG_G_DNL_PRODUCT_NUM=0x0300 diff --git a/configs/topic_miamiplus_defconfig b/configs/topic_miamiplus_defconfig new file mode 100644 index 0000000..7cc999f --- /dev/null +++ b/configs/topic_miamiplus_defconfig @@ -0,0 +1,48 @@ +CONFIG_ARM=y +CONFIG_SYS_VENDOR="topic" +CONFIG_SYS_CONFIG_NAME="topic_miamiplus" +CONFIG_ARCH_ZYNQ=y +CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miamiplus/ps7_regs.txt" +CONFIG_DEFAULT_DEVICE_TREE="zynq-topic-miamiplus" +CONFIG_SPL=y +CONFIG_BOOTDELAY=0 +CONFIG_SYS_NO_FLASH=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="zynq-uboot> " +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +CONFIG_CMD_DFU=y +CONFIG_CMD_GPIO=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_EMBED=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_ZYNQ_SDHCI=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_STMICRO=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +# CONFIG_NETDEVICES is not set +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_BASE=0xe0000000 +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_ZYNQ_QSPI=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_CI_UDC=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_G_DNL_MANUFACTURER="Xilinx" +CONFIG_G_DNL_VENDOR_NUM=0x03fd +CONFIG_G_DNL_PRODUCT_NUM=0x0300 diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h new file mode 100644 index 0000000..3b0fa29 --- /dev/null +++ b/include/configs/topic_miami.h @@ -0,0 +1,149 @@ +/* + * (C) Copyright 2014 Topic Embedded Products + * + * Configuration for Zynq Evaluation and Development Board - Miami + * See zynq-common.h for Zynq common configs + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_TOPIC_MIAMI_H +#define __CONFIG_TOPIC_MIAMI_H + +#define CONFIG_ZYNQ_PS_CLK_FREQ 33333333UL + +#define CONFIG_ZYNQ_I2C0 +#define CONFIG_ZYNQ_I2C1 + +/* Speed up boot time by ignoring the environment which we never used */ +#define CONFIG_ENV_IS_NOWHERE + +#include "zynq-common.h" + +/* Fixup settings */ +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_SIZE 0x8000 +#undef CONFIG_ENV_OFFSET +#define CONFIG_ENV_OFFSET 0x80000 + +/* SPL settings */ +#undef CONFIG_SPL_ETH_SUPPORT +#undef CONFIG_SYS_SPI_U_BOOT_OFFS +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#undef CONFIG_SPL_MAX_FOOTPRINT +#define CONFIG_SPL_MAX_FOOTPRINT CONFIG_SYS_SPI_U_BOOT_OFFS +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" + +/* sspi command isn't useful */ +#undef CONFIG_CMD_SPI + +/* No useful gpio */ +#undef CONFIG_ZYNQ_GPIO +#undef CONFIG_CMD_GPIO + +/* No falcon support */ +#undef CONFIG_SPL_OS_BOOT +#undef CONFIG_SPL_FPGA_SUPPORT + +/* FPGA commands that we don't use */ +#undef CONFIG_CMD_FPGA_LOADMK +#undef CONFIG_CMD_FPGA_LOADP +#undef CONFIG_CMD_FPGA_LOADBP +#undef CONFIG_CMD_FPGA_LOADFS + +/* Extras */ +#define CONFIG_CMD_MEMTEST +#undef CONFIG_SYS_MEMTEST_START +#define CONFIG_SYS_MEMTEST_START 0 +#undef CONFIG_SYS_MEMTEST_END +#define CONFIG_SYS_MEMTEST_END 0x18000000 + +/* Faster flash, ours may run at 108 MHz */ +#undef CONFIG_SF_DEFAULT_SPEED +#define CONFIG_SF_DEFAULT_SPEED 108000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#undef CONFIG_SF_DUAL_FLASH +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#undef CONFIG_SPI_FLASH_WINBOND +#undef CONFIG_SPI_FLASH_ISSI + +/* Setup proper boot sequences for Miami boards */ + +#if defined(CONFIG_USB) +# define EXTRA_ENV_USB \ + "usbreset=i2c dev 1 && i2c mw 41 1 ff && i2c mw 41 3 fe && "\ + "i2c mw 41 1 fe && i2c mw 41 1 ff\0" \ + "usbboot=run usbreset && if usb start; then " \ + "echo Booting from USB... && " \ + "if load usb 0 0x1900000 ${bootscript}; then "\ + "source 0x1900000; fi; " \ + "load usb 0 ${kernel_addr} ${kernel_image} && " \ + "load usb 0 ${devicetree_addr} ${devicetree_image} && " \ + "load usb 0 ${ramdisk_load_address} ${ramdisk_image} && " \ + "bootm ${kernel_addr} ${ramdisk_load_address} "\ + "${devicetree_addr}; " \ + "fi\0" + /* Note that addresses here should match the addresses in the env */ +# undef DFU_ALT_INFO +# define DFU_ALT_INFO \ + "dfu_alt_info=" \ + "uImage ram 0x2080000 0x500000;" \ + "devicetree.dtb ram 0x2000000 0x20000;" \ + "uramdisk.image.gz ram 0x4000000 0x10000000\0" \ + "dfu_ram=run usbreset && dfu 0 ram 0\0" \ + "thor_ram=run usbreset && thordown 0 ram 0\0" +#else +# define EXTRA_ENV_USB +#endif + +#undef CONFIG_PREBOOT + +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "kernel_image=uImage\0" \ + "kernel_addr=0x2080000\0" \ + "ramdisk_image=uramdisk.image.gz\0" \ + "ramdisk_load_address=0x4000000\0" \ + "devicetree_image=devicetree.dtb\0" \ + "devicetree_addr=0x2000000\0" \ + "bitstream_image=fpga.bin\0" \ + "bootscript=autorun.scr\0" \ + "loadbit_addr=0x100000\0" \ + "loadbootenv_addr=0x2000000\0" \ + "kernel_size=0x400000\0" \ + "devicetree_size=0x10000\0" \ + "boot_size=0xF00000\0" \ + "fdt_high=0x20000000\0" \ + "initrd_high=0x20000000\0" \ + "mmc_loadbit=echo Loading bitstream from SD/MMC/eMMC to RAM.. && " \ + "mmcinfo && " \ + "load mmc 0 ${loadbit_addr} ${bitstream_image} && " \ + "fpga load 0 ${loadbit_addr} ${filesize}\0" \ + "qspiboot=echo Booting from QSPI flash... && " \ + "sf probe && " \ + "sf read ${devicetree_addr} 0xA0000 ${devicetree_size} && " \ + "sf read ${kernel_addr} 0xC0000 ${kernel_size} && " \ + "bootm ${kernel_addr} - ${devicetree_addr}\0" \ + "sdboot=if mmcinfo; then " \ + "setenv bootargs console=ttyPS0,115200 " \ + "root=/dev/mmcblk0p2 rw rootfstype=ext4 " \ + "rootwait quiet ; " \ + "load mmc 0 ${kernel_addr} ${kernel_image}&& " \ + "load mmc 0 ${devicetree_addr} ${devicetree_image}&& " \ + "bootm ${kernel_addr} - ${devicetree_addr}; " \ + "fi\0" \ + EXTRA_ENV_USB \ + DFU_ALT_INFO + +#undef CONFIG_BOOTCOMMAND +#define CONFIG_BOOTCOMMAND "if mmcinfo; then " \ + "if fatload mmc 0 0x1900000 ${bootscript}; then source 0x1900000; " \ + "fi; fi; run $modeboot" +#undef CONFIG_DISPLAY_BOARDINFO + +/* Further tweaks to reduce image size */ +#undef CONFIG_CMD_BOOTZ +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_AES + +#endif /* __CONFIG_TOPIC_MIAMI_H */ diff --git a/include/configs/topic_miamiplus.h b/include/configs/topic_miamiplus.h new file mode 100644 index 0000000..46ca6bd --- /dev/null +++ b/include/configs/topic_miamiplus.h @@ -0,0 +1,2 @@ +#include "topic_miami.h" +#define CONFIG_SF_DUAL_FLASH -- 1.9.1

2 1

[U-Boot] MII and Ethernet chip are not detected in my envirnoment console
by chethan.g 06 Oct '16

06 Oct '16

Hii Everyone, I've been looking everywhere and could not find any correct resources to help me. I designed Ethernet board with Cyclone V(5CSEBA5U19A7N) using Quartus 15.1 Prime Standard. I am using KSZ9031RNX ethernet chip in my Board. I strucked in environment before linux kernel.In environment my ethernet chip is not detected.In place of my ethernet chip(KSZ9031RNX) it shows ethernet chip(KSZ9021RNX). /******************************************************** micrel-ksz9021-clk-skew=0xf0f0 micrel-ksz9021-data-skew=0x0 ********************************************************/ I am unable to observe MII status .It didnt show anything related mii . /----------------------------------------------------------------------------- Environment size: 2555/4092 bytes SOCFPGA_CYCLONE5 # mii info SOCFPGA_CYCLONE5 # ------------------------------------------------------------------------------/ I generated preloader and u-boot.img in SOC Embedded Shell by using MAKE and MAKE UBOOT commands. My question is ...How to generate uboot.img to show my MII status and to detect my ethernet chip(KSZ9031RNX).. If anyone knows related to my querry.please inform me. Thanks in advance. Regards. Chethan -- View this message in context: http://u-boot.10912.n7.nabble.com/MII-and-Ethernet-chip-are-not-detected-in… Sent from the U-Boot mailing list archive at Nabble.com.

1 0

[U-Boot] x86: u-boot.bin differs in u-boot.rom
by Stefan Roese 06 Oct '16

06 Oct '16

Hi Bin, Hi Simon, I'm currently trying to only update the u-boot.bin part in the SPI NOR chip instead of updating the complete ROM (8MiB). Updating u-boot.bin (same as u-boot-dtb.bin) at 0x70.0000 results in a non booting board though. I've checked a bit and found that the U-Boot image in u-boot.rom at this offset differs from the original u-boot.bin file. Here a diff: uboot.test (u-boot.rom at offset 0x70.0000) 0000 2D50: 54 2D F0 FF 50 4C F7 FF 00 98 01 00 00 00 F0 FF T-..PL.. ........ u-boot.bin 0000 2D50: 54 2D F0 FF 00 00 00 00 00 00 00 00 00 00 F0 FF T-...... ........ Do you know why this is the case? I would have expected no differ Thanks, Stefan

2 1

[U-Boot] Display output in LCD
by Othmane Essamlali 06 Oct '16

06 Oct '16

Hello all, We have a "Ka-Ro TX6S-8035" Board (TX baseboard + Freescale i.MX6SoloX) and we made a Linux build for it via linuxlink (timesys) based on Yocto installer(QT5). We are now able to boot our system from the board but we still cant assign the output to the lcd(FG0700G3DSSWBG01). We tryed setenv stdout/stderr/stdin/ lcd then saveenv, after rebooting they are set to serial again. Except those variables the rest stay saved after the reboot. We are wondering if we are missing something, maybe someone can help over there. Thanks a lot. Otman Essam

1 1

[U-Boot] x86: Updating u-boot.bin vs u-boot.rom
by Stefan Roese 06 Oct '16

06 Oct '16

Hi Bin, Hi Simon, I'm currently trying to only update the u-boot.bin part in the SPI NOR chip instead of updating the complete ROM (8MiB). Updating u-boot.bin (same as u-boot-dtb.bin) at 0x70.0000 results in a non booting board though. I've checked a bit and found that the U-Boot image in u-boot.rom at this offset differs from the original u-boot.bin file. Here a diff: uboot.test (u-boot.rom at offset 0x70.0000) 0000 2D50: 54 2D F0 FF 50 4C F7 FF 00 98 01 00 00 00 F0 FF T-..PL.. ........ u-boot.bin 0000 2D50: 54 2D F0 FF 00 00 00 00 00 00 00 00 00 00 F0 FF T-...... ........ Do you know why this is the case? I would have expected no differences here. Thanks, Stefan

1 0

[U-Boot] [PATCH] udoo: Add a README file
by Fabio Estevam 06 Oct '16

06 Oct '16

Add a README file to explain how to build and flash the SD card for Udoo boards. Signed-off-by: Fabio Estevam <fabio.estevam(a)nxp.com> --- board/udoo/README | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 board/udoo/README diff --git a/board/udoo/README b/board/udoo/README new file mode 100644 index 0000000..6fbcc59 --- /dev/null +++ b/board/udoo/README @@ -0,0 +1,21 @@ +How to use U-Boot on MX6Q/DL Udoo boards +---------------------------------------- + +- Build U-Boot for MX6Q/DL Udoo boards: + +$ make mrproper +$ make udoo_defconfig +$ make + +This will generate the SPL image called SPL and the u-boot.img. + +- Flash the SPL image into the SD card: + +sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync + +- Flash the u-boot.img image into the SD card: + +sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync + +- Insert the SD card in the board, power it up and U-Boot messages should +come up. -- 2.7.4

2 1

[U-Boot] [PATCH 00/10] mx7: add dt support for Colibri iMX7S/iMX7D
by Stefan Agner 06 Oct '16

06 Oct '16

From: Stefan Agner <stefan.agner(a)toradex.com> This patchset adds device tree support for Colibri iMX7S/iMX7D. It is the first device tree enabled board for any i.MX 7 SoC hence the patchset adds some common infrastructure: - Add device tree support for serial_mxc. - imx7.dtsi - I descided to leave the s/d suffix since the SoCs are very similar and boards will likely use runtime detection to distinguish the two available SoCs. - The pinmux file imx7d-pinfunc.h is taken from the Kernel and stored in the same place Otherwise the conversion is quite straightforward and simplified the board code somewhat. Two patches enhance the board support with PMIC support, which has been the driver for this conversion. -- Stefan Stefan Agner (10): dm: imx: serial: support device tree pinctrl: imx: do not announce driver initialization arm: dts: imx7: add pinctrl defines arm: dts: imx7: add basic i.MX 7/Colibri iMX7 device tree colibri_imx7: remove legancy I2C support colibri_imx7: remove legancy UART platform data power: pmic: add Ricoh RN5T567 PMIC support arm: dts: imx7: add Ricoh RN5T567 PMIC node colibri_imx7: use Ricoh RN5T567 to reboot the board configs: enable device tree for Colibri iMX7 arch/arm/dts/Makefile | 2 + arch/arm/dts/imx7-colibri.dts | 97 ++ arch/arm/dts/imx7.dtsi | 194 ++++ arch/arm/dts/imx7d-pinfunc.h | 1151 ++++++++++++++++++++++++ board/toradex/colibri_imx7/colibri_imx7.c | 92 +- configs/colibri_imx7_defconfig | 10 +- doc/device-tree-bindings/pmic/rn5t567.txt | 17 + doc/device-tree-bindings/serial/mxc-serial.txt | 8 + drivers/pinctrl/nxp/pinctrl-imx.c | 2 +- drivers/power/pmic/Kconfig | 8 + drivers/power/pmic/Makefile | 1 + drivers/power/pmic/rn5t567.c | 64 ++ drivers/serial/serial_mxc.c | 28 +- include/configs/colibri_imx7.h | 3 +- include/power/rn5t567_pmic.h | 115 +++ 15 files changed, 1736 insertions(+), 56 deletions(-) create mode 100644 arch/arm/dts/imx7-colibri.dts create mode 100644 arch/arm/dts/imx7.dtsi create mode 100644 arch/arm/dts/imx7d-pinfunc.h create mode 100644 doc/device-tree-bindings/pmic/rn5t567.txt create mode 100644 doc/device-tree-bindings/serial/mxc-serial.txt create mode 100644 drivers/power/pmic/rn5t567.c create mode 100644 include/power/rn5t567_pmic.h -- 2.9.0

4 24

[U-Boot] [PATCH 00/12] dm: x86: Improve vesa driver-model support
by Simon Glass 06 Oct '16

06 Oct '16

At present samus uses driver model but link does not. This series fixes this and adds a few features to make it easier to support driver-model video on other machines that use vesa. It also includes a faster memmove() function which speeds up scrolling dramatically. Simon Glass (12): Revert "x86: broadwell: gpio: Remove the codes to set up pin control" x86: Add an accelerated memmove() function Fix return value in trailing_strtoln() list: Add list_last_entry() to find the last entry dm: core: Add a function to get a uclass name x86: video: Fix typo in broadwell Kconfig dm: x86: video: Add a driver-model driver for ivybridge graphics dm: stdio: Allow lazy probing of video devices dm: video: Add driver-model support to vesa graphics x86: Adjust config to support DM_VIDEO dm: x86: Move samus to use new driver model support dm: x86: Move link to use driver model for video arch/x86/cpu/broadwell/sdram.c | 1 - arch/x86/cpu/ivybridge/Makefile | 1 - arch/x86/cpu/ivybridge/bd82x6x.c | 12 -- arch/x86/cpu/ivybridge/early_me.c | 1 - arch/x86/cpu/ivybridge/gma.h | 156 ----------------- arch/x86/cpu/ivybridge/model_206ax.c | 1 - arch/x86/cpu/ivybridge/sata.c | 1 - arch/x86/include/asm/arch-ivybridge/bd82x6x.h | 12 -- arch/x86/include/asm/cpu.h | 1 - arch/x86/include/asm/string.h | 2 +- arch/x86/lib/Makefile | 1 + arch/x86/lib/memmove.c | 193 +++++++++++++++++++++ common/stdio.c | 67 ++++++- configs/chromebook_link_defconfig | 2 + drivers/core/uclass.c | 9 + drivers/gpio/intel_broadwell_gpio.c | 7 + drivers/pci/pci_rom.c | 55 ++++++ drivers/video/Kconfig | 14 +- drivers/video/Makefile | 1 + drivers/video/broadwell_igd.c | 39 +---- .../ivybridge/gma.c => drivers/video/ivybridge.c | 78 ++++----- include/configs/x86-chromebook.h | 10 +- include/configs/x86-common.h | 2 + include/dm/uclass.h | 8 + include/linux/list.h | 11 ++ include/vbe.h | 2 + lib/strto.c | 8 +- 27 files changed, 423 insertions(+), 272 deletions(-) delete mode 100644 arch/x86/cpu/ivybridge/gma.h delete mode 100644 arch/x86/include/asm/arch-ivybridge/bd82x6x.h create mode 100644 arch/x86/lib/memmove.c rename arch/x86/cpu/ivybridge/gma.c => drivers/video/ivybridge.c (94%) -- 2.8.0.rc3.226.g39d4020

2 25

[U-Boot] [PATCH v2 1/2] tools: buildmand: Remove duplicated code
by York Sun 06 Oct '16

06 Oct '16

Signed-off-by: York Sun <york.sun(a)nxp.com> CC: Simon Glass <sjg(a)chromium.org> Acked-by: Simon Glass <sjg(a)chromium.org> --- Changes in v2: None tools/buildman/builderthread.py | 4 ---- 1 file changed, 4 deletions(-) diff --git a/tools/buildman/builderthread.py b/tools/buildman/builderthread.py index c512d3b..16e87f3 100644 --- a/tools/buildman/builderthread.py +++ b/tools/buildman/builderthread.py @@ -304,10 +304,6 @@ class BuilderThread(threading.Thread): print >>fd, 'arch', result.toolchain.arch fd.write('%s' % result.return_code) - with open(os.path.join(build_dir, 'toolchain'), 'w') as fd: - print >>fd, 'gcc', result.toolchain.gcc - print >>fd, 'path', result.toolchain.path - # Write out the image and function size information and an objdump env = result.toolchain.MakeEnvironment(self.builder.full_path) lines = [] -- 2.7.4

3 4

[U-Boot] [PATCH v2 00/10] Python 3.x support for patman & dtoc
by Paul Burton 06 Oct '16

06 Oct '16

This series makes patman & dtoc run on python 3.x, which allows them to work without hacks on distributions where the python binary is python 3.x. All changes are made in a way that continue to work on python 2.x, so both tools should work on either major version of python. Paul Burton (10): patman: Replace tabs with spaces patman: Make print statements python 3.x safe patman: Make exception handling python 3.x safe patman: Import 'configparser' lower case to be python 3.x safe patman: Decode stdout/stderr as utf8, be python 3.x safe patman: Use items() to iterate over dictionaries patman: Fix doctest StringIO import for python 3.x dtoc: Use items() to iterate over dictionaries in python 3.x dtoc: Decode strings for struct.unpack on python 3.x dtoc: Make integer division python 3.x safe tools/dtoc/dtoc.py | 10 +++++----- tools/dtoc/fdt_fallback.py | 2 +- tools/dtoc/fdt_util.py | 3 +++ tools/patman/checkpatch.py | 16 ++++++++-------- tools/patman/command.py | 2 +- tools/patman/cros_subprocess.py | 6 +++--- tools/patman/get_maintainer.py | 2 +- tools/patman/gitutil.py | 18 +++++++++--------- tools/patman/patchstream.py | 6 +++--- tools/patman/patman.py | 12 ++++++------ tools/patman/series.py | 42 +++++++++++++++++++++-------------------- tools/patman/settings.py | 37 ++++++++++++++++++++++-------------- tools/patman/terminal.py | 12 +++++++----- tools/patman/test.py | 2 +- 14 files changed, 93 insertions(+), 77 deletions(-) -- 2.10.0

2 23