January 2016 - U-Boot

[U-Boot] [PATCH] udoo:use load instead of fatload
by Oscar Curero 20 Jan '16

20 Jan '16

That way the FS can also be ext2/3/4 Signed-off-by: Oscar Curero <oscar(a)naiandei.net> --- include/configs/udoo.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/configs/udoo.h b/include/configs/udoo.h index 8ec073d..3d0cafa 100644 --- a/include/configs/udoo.h +++ b/include/configs/udoo.h @@ -96,11 +96,11 @@ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ "loadbootscript=" \ - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ -- 2.1.4

3 2

[U-Boot] [PATCH] am335x: BeagleBones enable CONFIG_AUTOBOOT_KEYED
by Robert Nelson 20 Jan '16

20 Jan '16

On startup, the BeagleBone family of boards can occationally halt at the U-Boot prompt. Due to U-Boot receiving random data on the usart. Migrate BeagleBone based boards to use CONFIG_AUTOBOOT_KEYED, user will now have to enter the <SPACE> key to get to U-Boot prompt Signed-off-by: Robert Nelson <robertcnelson(a)gmail.com> CC: Craig McQueen <craig.mcqueen(a)innerrange.com> CC: Tom Rini <trini(a)konsulko.com> --- configs/am335x_boneblack_defconfig | 4 ++++ configs/am335x_boneblack_vboot_defconfig | 4 ++++ configs/am335x_evm_defconfig | 4 ++++ 3 files changed, 12 insertions(+) diff --git a/configs/am335x_boneblack_defconfig b/configs/am335x_boneblack_defconfig index 3030a95..8803da5 100644 --- a/configs/am335x_boneblack_defconfig +++ b/configs/am335x_boneblack_defconfig @@ -4,6 +4,10 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT" +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" +CONFIG_AUTOBOOT_DELAY_STR="d" +CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/am335x_boneblack_vboot_defconfig b/configs/am335x_boneblack_vboot_defconfig index ad40b07..5dcb942 100644 --- a/configs/am335x_boneblack_vboot_defconfig +++ b/configs/am335x_boneblack_vboot_defconfig @@ -8,6 +8,10 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT,ENABLE_VBOOT" +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" +CONFIG_AUTOBOOT_DELAY_STR="d" +CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig index 27cb881..7753ab5 100644 --- a/configs/am335x_evm_defconfig +++ b/configs/am335x_evm_defconfig @@ -4,6 +4,10 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SYS_EXTRA_OPTIONS="NAND" +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" +CONFIG_AUTOBOOT_DELAY_STR="d" +CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y -- 2.6.4

2 2

[U-Boot] [PATCHv2 0/5] igep00x0: Minor cleanup
by Enric Balletbo i Serra 20 Jan '16

20 Jan '16

Hi Tom, The following patches are minor cleanups that I think are safe to apply. I know that we're very close to next release so it's up to you apply now or wait for the next merge window. I'd like to see it merged but I don't any objection if you decide wait. Thanks, Enric Enric Balletbo i Serra (1): igep00x0: enable CONFIG_NET_RANDOM_ETHADDR Ladislav Michl (4): igep00x0: Cleanup ethernet support igep00x0: Do not include config_distro_defaults.h igep00x0: Fix config header indentation igep00x0: Remove no-op macros from config header board/isee/igep00x0/igep00x0.c | 33 +++++++++++++++++++-------------- configs/igep0020_defconfig | 1 + configs/igep0020_nand_defconfig | 1 + configs/igep0032_defconfig | 1 + include/configs/omap3_igep00x0.h | 13 +++---------- 5 files changed, 25 insertions(+), 24 deletions(-) -- 2.1.0

3 21

[U-Boot] [PATCH] armv7: Add missing newline after OMAP die ID
by Ladislav Michl 20 Jan '16

20 Jan '16

Signed-off-by: Ladislav Michl <ladis(a)linux-mips.org> --- arch/arm/cpu/armv7/omap-common/utils.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/cpu/armv7/omap-common/utils.c b/arch/arm/cpu/armv7/omap-common/utils.c index 602d993..52ea734 100644 --- a/arch/arm/cpu/armv7/omap-common/utils.c +++ b/arch/arm/cpu/armv7/omap-common/utils.c @@ -108,6 +108,6 @@ void omap_die_id_display(void) omap_die_id(die_id); - printf("OMAP die ID: %08x%08x%08x%08x", die_id[0], die_id[1], die_id[2], - die_id[3]); + printf("OMAP die ID: %08x%08x%08x%08x\n", die_id[0], die_id[1], + die_id[2], die_id[3]); } -- 2.1.4

3 2

[U-Boot] [PATCH] ti_omap3_common: Do not define CONFIG_SPL_NAND_SUPPORT
by Ladislav Michl 20 Jan '16

20 Jan '16

Symbol is already defined in ti_armv7_common.h which is included via ti_armv7_omap.h Signed-off-by: Ladislav Michl <ladis(a)linux-mips.org> --- include/configs/ti_omap3_common.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 1c71cb6..02fdcdc 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -73,7 +73,6 @@ #ifdef CONFIG_NAND -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SYS_NAND_BASE 0x30000000 #endif -- 2.1.4

2 2

[U-Boot] [PATCH 0/8] m68k, mips, powerpc, kbuild: move CONFIG_SYS_TEXT_BASE
by Masahiro Yamada 20 Jan '16

20 Jan '16

Currently, CONFIG_SYS_TEXT_BASE is defined in various ways: [1] by board/${VENDOR}/${BOARD}/config.mk [2] by CONFIG_SYS_EXTRA_OPTIONS (This was "options" field of boards.cfg before Kconfig conversion) [3] by include/configs/${BOARD}.h [4] by configs/${BOARD}_defconfig Kbuild is still keeping some tricky code for [1]. We have some boards using [1] for M68K, MIPS, PowerPC. Convert them and drop the workaround code from Kbuild. I built all the boards and compared the checksum of the binary images for all of them. I confirmed no impact on these moves. This series should be OK. Masahiro Yamada (8): m68k: move CONFIG_SYS_TEXT_BASE to defconfig files m68k: M54418TWR: drop board/freescale/m54418twr/config.mk microblaze: move CONFIG_SYS_TEXT_BASE to defconfig mips: vct: move CONFIG_SYS_TEXT_BASE away from config.mk mips: dbau1x00: move CONFIG_SYS_TEXT_BASE away from config.mk mips: pb1x00: move CONFIG_SYS_TEXT_BASE away from config.mk powerpc: yucca: drop redundant CONFIG_SYS_TEXT_BASE from config.mk kbuild: drop workaround for old style CONFIG_SYS_TEXT_BASE defines Kconfig | 3 ++- Makefile | 6 ------ arch/m68k/cpu/mcf5445x/start.S | 8 ++++---- board/amcc/yucca/config.mk | 6 ------ board/cobra5272/config.mk | 9 --------- board/dbau1x00/config.mk | 16 ---------------- board/freescale/m5208evbe/config.mk | 9 --------- board/freescale/m5249evb/config.mk | 9 --------- board/freescale/m5253demo/config.mk | 9 --------- board/freescale/m5253evbe/config.mk | 9 --------- board/freescale/m5272c3/config.mk | 9 --------- board/freescale/m5275evb/config.mk | 9 --------- board/freescale/m5282evb/config.mk | 9 --------- board/freescale/m53017evb/config.mk | 9 --------- board/freescale/m5329evb/config.mk | 9 --------- board/freescale/m5373evb/config.mk | 9 --------- board/freescale/m54418twr/config.mk | 7 ------- board/freescale/m547xevb/config.mk | 9 --------- board/freescale/m548xevb/config.mk | 9 --------- board/micronas/vct/config.mk | 13 ------------- board/pb1x00/config.mk | 16 ---------------- board/sysam/amcore/config.mk | 7 ------- board/xilinx/microblaze-generic/config.mk | 2 -- configs/M5208EVBE_defconfig | 1 + configs/M52277EVB_defconfig | 3 ++- configs/M52277EVB_stmicro_defconfig | 3 ++- configs/M5235EVB_Flash32_defconfig | 3 ++- configs/M5235EVB_defconfig | 2 +- configs/M5249EVB_defconfig | 1 + configs/M5253DEMO_defconfig | 1 + configs/M5253EVBE_defconfig | 1 + configs/M5272C3_defconfig | 1 + configs/M5275EVB_defconfig | 1 + configs/M5282EVB_defconfig | 1 + configs/M53017EVB_defconfig | 1 + configs/M5329AFEE_defconfig | 1 + configs/M5329BFEE_defconfig | 1 + configs/M5373EVB_defconfig | 1 + configs/M54418TWR_defconfig | 3 ++- configs/M54418TWR_nand_mii_defconfig | 3 ++- configs/M54418TWR_nand_rmii_defconfig | 3 ++- configs/M54418TWR_nand_rmii_lowfreq_defconfig | 3 ++- configs/M54418TWR_serial_mii_defconfig | 3 ++- configs/M54418TWR_serial_rmii_defconfig | 3 ++- configs/M54451EVB_defconfig | 3 ++- configs/M54451EVB_stmicro_defconfig | 3 ++- configs/M54455EVB_a66_defconfig | 3 ++- configs/M54455EVB_defconfig | 3 ++- configs/M54455EVB_i66_defconfig | 3 ++- configs/M54455EVB_intel_defconfig | 3 ++- configs/M54455EVB_stm33_defconfig | 3 ++- configs/M5475AFE_defconfig | 1 + configs/M5475BFE_defconfig | 1 + configs/M5475CFE_defconfig | 1 + configs/M5475DFE_defconfig | 1 + configs/M5475EFE_defconfig | 1 + configs/M5475FFE_defconfig | 1 + configs/M5475GFE_defconfig | 1 + configs/M5485AFE_defconfig | 1 + configs/M5485BFE_defconfig | 1 + configs/M5485CFE_defconfig | 1 + configs/M5485DFE_defconfig | 1 + configs/M5485EFE_defconfig | 1 + configs/M5485FFE_defconfig | 1 + configs/M5485GFE_defconfig | 1 + configs/M5485HFE_defconfig | 1 + configs/amcore_defconfig | 1 + configs/cobra5272_defconfig | 1 + configs/eb_cpu5282_defconfig | 3 ++- configs/eb_cpu5282_internal_defconfig | 3 ++- configs/microblaze-generic_defconfig | 1 + include/configs/M54418TWR.h | 2 +- include/configs/dbau1x00.h | 5 +++++ include/configs/pb1x00.h | 5 +++++ include/configs/vct.h | 1 + 75 files changed, 84 insertions(+), 215 deletions(-) delete mode 100644 board/cobra5272/config.mk delete mode 100644 board/dbau1x00/config.mk delete mode 100644 board/freescale/m5208evbe/config.mk delete mode 100644 board/freescale/m5249evb/config.mk delete mode 100644 board/freescale/m5253demo/config.mk delete mode 100644 board/freescale/m5253evbe/config.mk delete mode 100644 board/freescale/m5272c3/config.mk delete mode 100644 board/freescale/m5275evb/config.mk delete mode 100644 board/freescale/m5282evb/config.mk delete mode 100644 board/freescale/m53017evb/config.mk delete mode 100644 board/freescale/m5329evb/config.mk delete mode 100644 board/freescale/m5373evb/config.mk delete mode 100644 board/freescale/m54418twr/config.mk delete mode 100644 board/freescale/m547xevb/config.mk delete mode 100644 board/freescale/m548xevb/config.mk delete mode 100644 board/micronas/vct/config.mk delete mode 100644 board/pb1x00/config.mk delete mode 100644 board/sysam/amcore/config.mk -- 1.9.1

7 27

[U-Boot] [PATCH] spi: ti_qspi: Use 4-byte opcode for mmap read
by Vignesh R 20 Jan '16

20 Jan '16

ti-qspi driver currently uses 3-byte addressing mode(and opcodes) for memory-mapped read. This restricts maximum addressable flash size to 16MB. Enable the 4-byte addressing(and use 4-byte opcode) for memory-mapped read to allow access to addresses above 16MB. Signed-off-by: Ravi Babu <ravibabu(a)ti.com> [vigneshr(a)ti.com: Re-word commit description] Signed-off-by: Vignesh R <vigneshr(a)ti.com> --- Tested on DRA74 EVM with Spansion flash and AM437X IDK EVM with Macronix flash. drivers/spi/ti_qspi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c index 646dd899d3ec..0a032845866d 100644 --- a/drivers/spi/ti_qspi.c +++ b/drivers/spi/ti_qspi.c @@ -48,14 +48,14 @@ #define CORE_CTRL_IO 0x4a002558 #define QSPI_CMD_READ (0x3 << 0) -#define QSPI_CMD_READ_QUAD (0x6b << 0) +#define QSPI_CMD_READ_QUAD (0x6c << 0) #define QSPI_CMD_READ_FAST (0x0b << 0) -#define QSPI_SETUP0_NUM_A_BYTES (0x2 << 8) +#define QSPI_SETUP0_NUM_A_BYTES (0x3 << 8) #define QSPI_SETUP0_NUM_D_BYTES_NO_BITS (0x0 << 10) #define QSPI_SETUP0_NUM_D_BYTES_8_BITS (0x1 << 10) #define QSPI_SETUP0_READ_NORMAL (0x0 << 12) #define QSPI_SETUP0_READ_QUAD (0x3 << 12) -#define QSPI_CMD_WRITE (0x2 << 16) +#define QSPI_CMD_WRITE (0x12 << 16) #define QSPI_NUM_DUMMY_BITS (0x0 << 24) /* ti qspi register set */ -- 2.6.3

3 5

[U-Boot] [PATCH] arm, ubifs: fix gcc5.x compiler warning
by Heiko Schocher 20 Jan '16

20 Jan '16

compiling U-Boot for openrd_base_defconfig with gcc 5.x shows the following warning: CC fs/ubifs/super.o In file included from fs/ubifs/ubifs.h:35:0, from fs/ubifs/super.c:37: fs/ubifs/super.c: In function 'atomic_inc': ./arch/arm/include/asm/atomic.h:55:2: warning: 'flags' is used uninitialized in this function [-Wuninitialized] local_irq_save(flags); ^ fs/ubifs/super.c: In function 'atomic_dec': ./arch/arm/include/asm/atomic.h:64:2: warning: 'flags' is used uninitialized in this function [-Wuninitialized] local_irq_save(flags); ^ CC fs/ubifs/sb.o [...] CC fs/ubifs/lpt.o In file included from include/linux/bitops.h:123:0, from include/common.h:20, from include/ubi_uboot.h:17, from fs/ubifs/ubifs.h:37, from fs/ubifs/lpt.c:35: fs/ubifs/lpt.c: In function 'test_and_set_bit': ./arch/arm/include/asm/bitops.h:57:2: warning: 'flags' is used uninitialized in this function [-Wuninitialized] local_irq_save(flags); ^ CC fs/ubifs/lpt_commit.o In file included from include/linux/bitops.h:123:0, from include/common.h:20, from include/ubi_uboot.h:17, from fs/ubifs/ubifs.h:37, from fs/ubifs/lpt_commit.c:26: fs/ubifs/lpt_commit.c: In function 'test_and_set_bit': ./arch/arm/include/asm/bitops.h:57:2: warning: 'flags' is used uninitialized in this function [-Wuninitialized] local_irq_save(flags); ^ CC fs/ubifs/scan.o CC fs/ubifs/lprops.o CC fs/ubifs/tnc.o In file included from include/linux/bitops.h:123:0, from include/common.h:20, from include/ubi_uboot.h:17, from fs/ubifs/ubifs.h:37, from fs/ubifs/tnc.c:30: fs/ubifs/tnc.c: In function 'test_and_set_bit': ./arch/arm/include/asm/bitops.h:57:2: warning: 'flags' is used uninitialized in this function [-Wuninitialized] local_irq_save(flags); ^ CC fs/ubifs/tnc_misc.o Fix it. Signed-off-by: Heiko Schocher <hs(a)denx.de> --- arch/arm/include/asm/atomic.h | 14 +++++++------- arch/arm/include/asm/bitops.h | 4 ++-- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index 34c07fe..9b79506 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -32,7 +32,7 @@ typedef struct { volatile int counter; } atomic_t; static inline void atomic_add(int i, volatile atomic_t *v) { - unsigned long flags; + unsigned long flags = 0; local_irq_save(flags); v->counter += i; @@ -41,7 +41,7 @@ static inline void atomic_add(int i, volatile atomic_t *v) static inline void atomic_sub(int i, volatile atomic_t *v) { - unsigned long flags; + unsigned long flags = 0; local_irq_save(flags); v->counter -= i; @@ -50,7 +50,7 @@ static inline void atomic_sub(int i, volatile atomic_t *v) static inline void atomic_inc(volatile atomic_t *v) { - unsigned long flags; + unsigned long flags = 0; local_irq_save(flags); v->counter += 1; @@ -59,7 +59,7 @@ static inline void atomic_inc(volatile atomic_t *v) static inline void atomic_dec(volatile atomic_t *v) { - unsigned long flags; + unsigned long flags = 0; local_irq_save(flags); v->counter -= 1; @@ -68,7 +68,7 @@ static inline void atomic_dec(volatile atomic_t *v) static inline int atomic_dec_and_test(volatile atomic_t *v) { - unsigned long flags; + unsigned long flags = 0; int val; local_irq_save(flags); @@ -81,7 +81,7 @@ static inline int atomic_dec_and_test(volatile atomic_t *v) static inline int atomic_add_negative(int i, volatile atomic_t *v) { - unsigned long flags; + unsigned long flags = 0; int val; local_irq_save(flags); @@ -94,7 +94,7 @@ static inline int atomic_add_negative(int i, volatile atomic_t *v) static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) { - unsigned long flags; + unsigned long flags = 0; local_irq_save(flags); *addr &= ~mask; diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h index d479a38..f33efeb 100644 --- a/arch/arm/include/asm/bitops.h +++ b/arch/arm/include/asm/bitops.h @@ -51,7 +51,7 @@ static inline int __test_and_set_bit(int nr, volatile void *addr) static inline int test_and_set_bit(int nr, volatile void * addr) { - unsigned long flags; + unsigned long flags = 0; int out; local_irq_save(flags); @@ -73,7 +73,7 @@ static inline int __test_and_clear_bit(int nr, volatile void *addr) static inline int test_and_clear_bit(int nr, volatile void * addr) { - unsigned long flags; + unsigned long flags = 0; int out; local_irq_save(flags); -- 2.1.0

5 7

[U-Boot] [PATCH 0/4] tegra: Move tegra20 towards the 'new' display bindings
by Simon Glass 20 Jan '16

20 Jan '16

The original tegra20 display driver was written before Linux had device tree bindings for display. Since then Linux has developed a robust set of bindings covering various aspects of enabling a display. This series moves closer to those bindings by using the panel and backlight as separate drivers. The device tree files for seaboard, ventana and harmony thereby become almost the same as Linux. Unfortunately this breaks the other boards, which will need a similar sync. So I'm not sure how easy it will be to accept this series. Still, it seems worth sending it out in the hope that board maintainers can help. I have kept this series separate so that it can progress separately. Simon Glass (4): tegra: dts: Sync seaboard device tree file with Linux video: tegra: Move to using simple-panel and pwm-backlight tegra: video: Always use write-through cache on LCD fdt: Drop some unused compatible strings arch/arm/dts/tegra20-harmony.dts | 751 ++++++++++++++++++++++++++++-- arch/arm/dts/tegra20-seaboard.dts | 934 ++++++++++++++++++++++++++++++++++---- arch/arm/dts/tegra20-ventana.dts | 685 ++++++++++++++++++++++++++-- configs/colibri_t20_defconfig | 5 +- configs/harmony_defconfig | 5 +- configs/medcom-wide_defconfig | 5 +- configs/paz00_defconfig | 5 +- configs/seaboard_defconfig | 5 +- configs/tec_defconfig | 5 +- configs/ventana_defconfig | 5 +- drivers/video/tegra.c | 333 +++----------- include/fdtdec.h | 4 - lib/fdtdec.c | 4 - 13 files changed, 2307 insertions(+), 439 deletions(-) -- 2.6.0.rc2.230.g3dd15c0

4 22

[U-Boot] [PATCH 0/8] driver model bring-up of keystone net on k2hk, k2l, k2e and k2g evm
by Mugunthan V N 20 Jan '16

20 Jan '16

This patch series enables keystone net to adopt driver model. This has been tested on the following evms (logs [1]) by tftp zImage from server. * k2hk evm * k2l evm * k2e evm * k2g evm Also pushed a branch for testing [2] [1] - http://pastebin.ubuntu.com/14581762/ [2] - git://git.ti.com/~mugunthanvnm/ti-u-boot/mugunth-ti-u-boot.git dm-keystone-net Mugunthan V N (8): board: ti: ks2_evm: remove board_eth_init when CONFIG_DM_ETH is defined drivers: net: phy: micrel: fix build errors with CONFIG_DM_ETH drivers: net: keystone_net: convert driver to adopt device driver model defconfig: k2hk_evm_defconfig: enable net driver model defconfig: k2l_evm_defconfig: enable net driver model defconfig: k2e_evm_defconfig: enable net driver model ARM: dts: k2g: Add keystone net dts files defconfig: k2g_evm_defconfig: enable net driver model arch/arm/dts/k2g-evm.dts | 12 ++ arch/arm/dts/k2g-netcp.dtsi | 151 ++++++++++++++++ arch/arm/dts/k2g.dtsi | 13 ++ board/ti/ks2_evm/board.c | 2 + configs/k2e_evm_defconfig | 1 + configs/k2g_evm_defconfig | 1 + configs/k2hk_evm_defconfig | 1 + configs/k2l_evm_defconfig | 1 + drivers/net/keystone_net.c | 418 +++++++++++++++++++++++++++++++++++++++----- drivers/net/phy/micrel.c | 6 +- 10 files changed, 562 insertions(+), 44 deletions(-) create mode 100644 arch/arm/dts/k2g-netcp.dtsi -- 2.7.0.rc3

2 16