September 2015 - U-Boot

[U-Boot] CONFIG_ENV_IS_IN_UBI not working nicely with CONFIG_SPI_FLASH_MTD
by Edward Wingate 25 Sep '15

25 Sep '15

I have been using u-boot with CONFIG_SPI_FLASH_MTD. This has allowed me to use MTD/UBI/UBIFS with SPI flash. I now want to use CONFIG_ENV_IS_IN_UBI, but after enabling this, u-boot can't read the environment on start-up: === U-Boot 2015.07 (Sep 24 2015 - 17:10:41 -0700) Model: Zynq Zed Development Board I2C: ready DRAM: ECC disabled 512 MiB MMC: zynq_sdhci: 0 Device nor0 not found! Error initializing mtdparts! ** Cannot find mtd partition "uboot-env-itb" Using default environment === "mtdparts" and "saveenv" do not work until after I do "sf probe". I'm using u-boot on a Zynq 7020 SoC. Can someone help me with what sf probe-equivalent function call to make and where? I'm guessing in board_init_f() or board_init_r()? Thanks for your help.

1 0

[U-Boot] [Patch V3 00/16] Add LS1043A platform support
by Gong Qianyu 25 Sep '15

25 Sep '15

[Patch V3 01/16] armv7/ls1021a: move ns_access to common file [Patch V3 02/16] common/board_f.c: modify the macro to use [Patch V3 03/16] net/fm: Fix the endian issue to support both [Patch V3 04/16] net/fm/eth: Use mb() to be compatible for both ARM [Patch V3 05/16] net/fm: Add support for 64-bit platforms [Patch V3 06/16] net/fm: Make the return value logic consistent with [Patch V3 07/16] net/fm: bug fix when CONFIG_PHYLIB not defined [Patch V3 08/16] net: Move some header files to include/ [Patch V3 09/16] net/fm: Add QSGMII PCS init [Patch V3 10/16] net/fm: fix MDIO controller base on FMAN2 [Patch V3 11/16] ARMv8/FSL_LSCH2: Add FSL_LSCH2 SoC [Patch V3 12/16] armv8/ls1043ardb: Add LS1043ARDB board support [Patch V3 13/16] armv8/ls1043ardb: Add nand boot support [Patch V3 14/16] armv8/ls1043a: Add Fman support [Patch V3 15/16] armv8/ls1043ardb: esdhc: Add esdhc support for [Patch V3 16/16] armv8/ls1043ardb: Add sd boot support

2 17

[U-Boot] U-boot hang on Renesas porter
by Sjoerd Simons 25 Sep '15

25 Sep '15

Hey all, I recently got a Renesas Porter board, obviously one of the first things i wanted to do is replace its u-boot with a somewhat more recent version. Unfortunately upstream u-boot simply hangs during initialisation. Some printf debugging showed that the board_init_r test sequence is successful, but the board_init_f sequence never starts? Curiously, u-boot master *does* starts when chainloaded from the NOR loader (iotw tftp new u-boot to the expected CONFIG_SYS_TEXT_BASE and jump into it). Which makes me suspect there is some initialisation missing. FWIW, to prevent toolchain issues, i've both tried gcc 4.9 (as downloaded by buildman) as well as the gcc 5 cross-compilers from Debian. I've also updated the QSPI loader with the latest one from the elinux bage (PORTER_SPI_LOADER_V019_DDR3L.bin) Current u-boot output: PORTER SPI_LOADER(DDR3L) V0.19 2015.02.12 DEVICE S25FL512 U-Boot 2015.10-rc3-00297-g1a9c229 (Sep 25 2015 - 16:25:46 +0200) CPU: Renesas Electronics R8A7791 rev 2.0 Board: Porter I2C: ready DRAM: 1 GiB (At this point the board hangs) -- Sjoerd Simons Collabora Ltd.

1 0

[U-Boot] buildman toolchains
by Bin Meng 25 Sep '15

25 Sep '15

Hi, I was using buildman to get toolchains from kernel.org to build U-Boot for as many boards as possible. But I still see some boards do not build. Are these build failures a known issue? Error log below: blackfin: + cm-bf561 blackstamp bct-brettl2 cm-bf527 bf506f-ezkit ip04 bf527-sdp bf537-minotaur bf609-ezkit bf537-stamp bf527-ezkit-v2 cm-bf537e tcm-bf518 cm-bf537u bf527-ezkit cm-bf533 pr1 bf533-ezkit ibf-dsp561 bf537-pnav bf537-srv1 cm-bf548 bf538f-ezkit bf548-ezkit bf525-ucr2 blackvme tcm-bf537 bf533-stamp bf518f-ezbrd bf527-ad7160-eval bf526-ezbrd bf561-ezkit br4 aarch64: + xilinx_zynqmp_ep hikey avr32: + atngw100mkii grasshopper atstk1002 atngw100 powerpc: + ebony taihu ocotea TQM834x taishan katmai sh: + sh7753evb rsk7269 rsk7264 shmin ms7720se mpr2 rsk7203 sh7785lcr_32bit sh7785lcr arm: + openrd_base axm openrd_ultimate zynq_zc70x openrd_client taurus +powerpc-linux-ld.bfd: section .resetvec loaded at [00000000fffffffc,00000000ffffffff] overlaps section .u_boot_list loaded at [00000000ffffff8c,00000001000008c3] +powerpc-linux-ld.bfd: u-boot: section .resetvec lma 0xfffffffc adjusted to 0x1000008c4 +make[1]: *** [u-boot] Error 1 +make: *** [sub-make] Error 2 +sh4-linux-gcc: error: command line option '-m3' is not supported by this configuration +make[2]: *** [include/autoconf.mk] Error 1 +make[1]: *** No rule to make target `include/config/auto.conf', needed by `include/config/uboot.release'. Stop. +/bin/sh: bfin-uclinux-ldr: command not found +make[1]: *** [u-boot.ldr] Error 127 +make[1]: bfin-uclinux-ldr: Command not found +powerpc-linux-ld.bfd: section .bootpg loaded at [00000000fffff000,00000000fffff23f] overlaps section .u_boot_list loaded at [00000000ffffeb04,00000000fffff393] +powerpc-linux-ld.bfd: u-boot: section .bootpg lma 0xfffff000 adjusted to 0xfffff394 +powerpc-linux-ld.bfd: u-boot: section .data.init lma 0xfffff400 adjusted to 0xfffff5d4 +board/renesas/sh7753evb/built-in.o: In function `init_gether_mdio': +build/../board/renesas/sh7753evb/sh7753evb.c:93: undefined reference to `PMB_ADDR_BASE' +build/../board/renesas/sh7753evb/sh7753evb.c:93: undefined reference to `PMB_DATA_BASE' +build/../board/renesas/sh7753evb/sh7753evb.c:93: undefined reference to `mk_pmb_addr_val' +build/../board/renesas/sh7753evb/sh7753evb.c:93: undefined reference to `mk_pmb_data_val' +drivers/i2c/built-in.o: warning: input is not relaxable +cc1: error: -mcpu=bf506-0.0 is not valid +cc1: error: unrecognized command line option '-mcpu=bf506-0.0' + (((base + size - 1) >> CSBNDS_EA_SHIFT) & + ^ +../board/tqc/tqm834x/tqm834x.c:80:2: note: containing loop + for(cs = 0; cs < 4; ++cs) { + ^ +u-boot.bin exceeds file size limit: + limit: 393216 bytes + actual: 440812 bytes + excess: 47596 bytes +make[1]: *** [u-boot.bin] Error 1 +cc1: error: -mcpu=bf609-0.0 is not valid +cc1: error: unrecognized command line option '-mcpu=bf609-0.0' + ((u32)(priv->rxbuffers) + + ^ + writel((u32)priv->rx_bd, &regs->rxqbase); + ^ +../arch/arm/include/asm/io.h:146:34: note: in definition of macro 'writel' + #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; }) + ^ + writel((u32)priv->tx_bd, &regs->txqbase); + ^ + priv->tx_bd->addr = (u32)ptr; + ^ + addr = (u32) ptr; + addr = (u32)priv->rxbuffers; + net_process_received_packet((u8 *)addr, frame_len); + ^ + priv->rx_bd = (struct emac_bd *)((u32)bd_space + BD_SEPRN_SPACE); + ^ + ^ + dma_unmap_single((void *)dwc->scratch_addr, dwc->nr_scratch * + ^ + dwc->regs = (int *)(dwc3_dev->base + DWC3_GLOBALS_REGS_START); + ^ + dwc3_flush_cache((int)trb, sizeof(*trb)); + dwc3_flush_cache((int)evt->buf, evt->length); + ^ + dwc3_flush_cache((int)trb, sizeof(*trb)); + dwc3_flush_cache((int)dwc->ep0_bounce, DWC3_EP0_BOUNCE_SIZE); + ^ + debug("%s: dev->in_req->length:%d to_cpy:%d\n", __func__, + dma_unmap_single((void *)req->dma, req->length, +In file included from ../include/linux/byteorder/big_endian.h:14:0, + from ../arch/powerpc/include/asm/byteorder.h:82, + from ../arch/powerpc/include/asm/bitops.h:8, + from ../include/linux/bitops.h:110, + from ../include/common.h:20, + from ../drivers/net/eepro100.c:8: + return le16_to_cpu (*(volatile u16 *) (addr + dev->iobase)); + ^ +../include/linux/byteorder/swab.h:81:31: note: in definition of macro '__swab16' + (__builtin_constant_p((__u16)(x)) ? \ +../include/linux/byteorder/generic.h:92:21: note: in expansion of macro '__le16_to_cpu' + #define le16_to_cpu __le16_to_cpu +../drivers/net/eepro100.c:243:9: note: in expansion of macro 'le16_to_cpu' +../include/linux/byteorder/swab.h:23:13: note: in definition of macro '___swab16' + (((__u16)(x) & (__u16)0x00ffU) << 8) | \ + ^ +../include/linux/byteorder/big_endian.h:37:26: note: in expansion of macro '__swab16' + #define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x)) + ^ +../include/linux/byteorder/swab.h:24:13: note: in definition of macro '___swab16' + (((__u16)(x) & (__u16)0xff00U) >> 8) )) +../include/linux/byteorder/swab.h:83:13: note: in definition of macro '__swab16' + __fswab16((x))) + *(volatile u16 *) ((addr + dev->iobase)) = cpu_to_le16 (command); + ^ + *(volatile u32 *) ((addr + dev->iobase)) = cpu_to_le32 (command); + return le32_to_cpu (*(volatile u32 *) (addr + dev->iobase)); +../include/linux/byteorder/swab.h:85:31: note: in definition of macro '__swab32' + (__builtin_constant_p((__u32)(x)) ? \ +../include/linux/byteorder/generic.h:90:21: note: in expansion of macro '__le32_to_cpu' + #define le32_to_cpu __le32_to_cpu +../drivers/net/eepro100.c:259:9: note: in expansion of macro 'le32_to_cpu' +../include/linux/byteorder/swab.h:27:13: note: in definition of macro '___swab32' + (((__u32)(x) & (__u32)0x000000ffUL) << 24) | \ +../include/linux/byteorder/big_endian.h:35:26: note: in expansion of macro '__swab32' + #define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x)) +../include/linux/byteorder/swab.h:28:13: note: in definition of macro '___swab32' + (((__u32)(x) & (__u32)0x0000ff00UL) << 8) | \ +../include/linux/byteorder/swab.h:29:13: note: in definition of macro '___swab32' + (((__u32)(x) & (__u32)0x00ff0000UL) >> 8) | \ +../include/linux/byteorder/swab.h:30:13: note: in definition of macro '___swab32' + (((__u32)(x) & (__u32)0xff000000UL) >> 24) )) +../include/linux/byteorder/swab.h:87:13: note: in definition of macro '__swab32' + __fswab32((x))) +powerpc-linux-ld.bfd: section .bootpg loaded at [00000000fffff000,00000000fffff24f] overlaps section .data loaded at [00000000ffffd2fc,00000000fffffa5b] +powerpc-linux-ld.bfd: section .resetvec loaded at [00000000fffffffc,00000000ffffffff] overlaps section .u_boot_list loaded at [00000000fffffa5c,0000000100000403] +powerpc-linux-ld.bfd: u-boot: section .bootpg lma 0xfffff000 adjusted to 0xfffffa5c +powerpc-linux-ld.bfd: u-boot: section .u_boot_list lma 0xfffffa5c adjusted to 0xfffffcac +powerpc-linux-ld.bfd: u-boot: section .resetvec lma 0xfffffffc adjusted to 0x100000654 +powerpc-linux-ld.bfd: u-boot: section .data.init lma 0x100000500 adjusted to 0x100000658 +powerpc-linux-ld.bfd: section .bootpg loaded at [00000000fffff000,00000000fffff24f] overlaps section .data loaded at [00000000ffffcf28,00000000fffff78f] +powerpc-linux-ld.bfd: section .resetvec loaded at [00000000fffffffc,00000000ffffffff] overlaps section .u_boot_list loaded at [00000000fffff790,000000010000001f] +powerpc-linux-ld.bfd: u-boot: section .bootpg lma 0xfffff000 adjusted to 0xfffff790 +powerpc-linux-ld.bfd: u-boot: section .u_boot_list lma 0xfffff790 adjusted to 0xfffff9e0 +powerpc-linux-ld.bfd: u-boot: section .resetvec lma 0xfffffffc adjusted to 0x100000270 +powerpc-linux-ld.bfd: u-boot: section .data.init lma 0x100000100 adjusted to 0x100000274 +arm-unknown-linux-gnueabi-ld.bfd: SPL image too big +arm-unknown-linux-gnueabi-objcopy: 'spl/u-boot-spl': No such file +make[2]: *** [spl/u-boot-spl.bin] Error 1 +make[1]: *** [spl/u-boot-spl] Error 2 +sh4-linux-gcc: error: command line option '-m2a' is not supported by this configuration +sh4-linux-gcc: error: command line option '-m2a-nofpu' is not supported by this configuration + actual: 440864 bytes + excess: 47648 bytes + actual: 440892 bytes + excess: 47676 bytes +../board/xilinx/zynq/Makefile:43: CONFIG_TARGET_ZYNQ_ZC70X is deprecated. +../board/xilinx/zynq/Makefile:44: Enable CONFIG_TARGET_ZYNQ_ZC702 or CONFIG_TARGET_ZYNQ_706 instead. +../board/xilinx/zynq/Makefile:45: "make zynq_zc70x_defconfig" is also deprecated. +../board/xilinx/zynq/Makefile:46: Use "make zynq_zc702_defconfig" or "make zynq_zc706_defconfig". + bank->base = (u8 *)plat->base; + ^ + desc->next_addr = (unsigned int)desc + sizeof(struct dwmci_idmac); + dwmci_writel(host, DWMCI_DBADDR, (unsigned int)cur_idmac); + (u32)bounce_buffer + (i * PAGE_SIZE)); + host->ioaddr = (void *)regbase; + ^ + debug("** %s(), len %d, buf %#x\n", __func__, length, (int)msg); + ^ +../include/common.h:109:26: note: in definition of macro 'debug_cond' + printf(pr_fmt(fmt), ##args); \ +../drivers/usb/eth/smsc95xx.c:697:2: note: in expansion of macro 'debug' + debug("Tx: len = %u, actual = %u, err = %d\n", + cur_buf_align = (int)buf_ptr - (int)recv_buf; Regards, Bin

4 7

[U-Boot] [PATCH v5 0/3] add pinctrl driver framework
by Masahiro Yamada 25 Sep '15

25 Sep '15

I am trying my best to have this subsystem as DT-compatible with Linux as possible, also saving memory foot print as a boot loader. It would be very appreciated if Linus Walleij, the maintainer of pinctrl subsystem in Linux, would check this series if he could find some time. Masahiro Yamada (3): dm: core: allow device_bind() to not return a device pointer pinctrl: add pin control uclass support pinctrl: sandbox: add sandbox pinctrl driver arch/sandbox/dts/sandbox.dts | 19 ++ configs/sandbox_defconfig | 3 + drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/core/device.c | 10 +- drivers/pinctrl/Kconfig | 109 ++++++++++++ drivers/pinctrl/Makefile | 4 + drivers/pinctrl/pinctrl-generic.c | 359 ++++++++++++++++++++++++++++++++++++++ drivers/pinctrl/pinctrl-sandbox.c | 147 ++++++++++++++++ drivers/pinctrl/pinctrl-uclass.c | 240 +++++++++++++++++++++++++ include/dm/device-internal.h | 4 +- include/dm/lists.h | 4 +- include/dm/pinctrl.h | 227 ++++++++++++++++++++++++ include/dm/uclass-id.h | 2 + 14 files changed, 1125 insertions(+), 6 deletions(-) create mode 100644 drivers/pinctrl/Kconfig create mode 100644 drivers/pinctrl/Makefile create mode 100644 drivers/pinctrl/pinctrl-generic.c create mode 100644 drivers/pinctrl/pinctrl-sandbox.c create mode 100644 drivers/pinctrl/pinctrl-uclass.c create mode 100644 include/dm/pinctrl.h -- 1.9.1

3 10

[U-Boot] pull request: u-boot-uniphier/master (2nd round)
by Masahiro Yamada 24 Sep '15

24 Sep '15

Hi Tom, Here is a pretty big series for UniPhier SoC changes. pinctrl drivers, various fixes, refactoring, new SoC/board support, etc. Diff from the previous one: - fix memory over-run bug in a command to display boot-mode - sort pin-groups alphabetically in pinctrl drivers - Add one more patch to convert a license block to SPDX The following changes since commit 8a5f6129d1450f5ff92a55cfcfd7b96ee019e303: pinctrl: move dm_scan_fdt_node() out of pinctrl uclass (2015-09-19 15:42:15 -0600) are available in the git repository at: git://git.denx.de/u-boot-uniphier.git master for you to fetch changes up to a4bb44b027705f8c05fc525180cabaa3769247bb: ARM: dts: uniphier: use SPDX-License-Identifier (2015-09-25 01:01:37 +0900) ---------------------------------------------------------------- Masahiro Yamada (33): pinctrl: uniphier: add UniPhier pinctrl core support pinctrl: uniphier: add UniPhier PH1-LD4 pinctrl driver pinctrl: uniphier: add UniPhier PH1-Pro4 pinctrl driver pinctrl: uniphier: add UniPhier PH1-sLD8 pinctrl driver pinctrl: uniphier: add UniPhier PH1-Pro5 pinctrl driver pinctrl: uniphier: add UniPhier ProXstream2 pinctrl driver pinctrl: uniphier: add UniPhier PH1-LD6b pinctrl driver ARM: uniphier: enable simple-bus driver for SPL ARM: uniphier: increase CONFIG_SYS_MALLOC_F_LEN to bind all nodes ARM: dts: uniphier: prepare device trees to use pinctrl in SPL ARM: uniphier: enable PINCTRL and SPL_PINCTRL ARM: uniphier: drop ad-hoc early pin-muxing settings ARM: uniphier: drop ad-hoc input enable settings ARM: uniphier: drop DCC micro support card support ARM: uniphier: enable setexpr command ARM: uniphier: change the external bus address mapping ARM: uniphier: remove ifdef CONFIG_{SOC} conditionals from sg-regs.h ARM: uniphier: parse device tree to determine DRAM base and size ARM: uniphier: remove unused header file ARM: uniphier: remove useless wrapper functions ARM: uniphier: refactor LED function ARM: uniphier: move CONFIG_SUPPORT_CARD_* macros to local file ARM: uniphier: allow to disable CONFIG_MICRO_SUPPORT_CARD ARM: uniphier: rename CONFIG_MACH_* to CONFIG_ARCH_UNIPHIER_* ARM: uniphier: delete unneeded input enable for low-level debug ARM: uniphier: fix glitch signal problem for low-level debug ARM: uniphier: unify low-level debug init code ARM: uniphier: remove kernel parameter settings from environment ARM: uniphier: allow to enable multiple SoCs ARM: uniphier: add PH1-Pro5 support ARM: uniphier: add ProXstream2 and PH1-LD6b support ARM: uniphier: fix init page table for ProXstream2/PH1-LD6b USB boot ARM: dts: uniphier: use SPDX-License-Identifier arch/arm/dts/Makefile | 5 +- arch/arm/dts/uniphier-ph1-ld4-ref.dts | 16 ++- arch/arm/dts/uniphier-ph1-ld6b-ref.dts | 17 ++- arch/arm/dts/uniphier-ph1-pro4-ref.dts | 16 ++- arch/arm/dts/uniphier-ph1-pro5-4kbox.dts | 64 ++++++++++++ arch/arm/dts/uniphier-ph1-sld8-ref.dts | 16 ++- arch/arm/dts/uniphier-pinctrl.dtsi | 38 +------ arch/arm/dts/uniphier-proxstream2-gentil.dts | 62 +++++++++++ arch/arm/dts/uniphier-proxstream2-vodka.dts | 62 +++++++++++ arch/arm/mach-uniphier/Kconfig | 95 ++++++++--------- arch/arm/mach-uniphier/Makefile | 21 ++-- arch/arm/mach-uniphier/bcu/Makefile | 3 + arch/arm/mach-uniphier/{ph1-ld4/bcu_init.c => bcu/bcu-ph1-ld4.c} | 8 +- arch/arm/mach-uniphier/{ph1-sld3/bcu_init.c => bcu/bcu-ph1-sld3.c} | 8 +- arch/arm/mach-uniphier/board_common.c | 23 +--- arch/arm/mach-uniphier/board_early_init_f.c | 73 ++++++++++--- arch/arm/mach-uniphier/board_early_init_r.c | 7 +- arch/arm/mach-uniphier/boards.c | 130 +++++++++++++++++++++++ arch/arm/mach-uniphier/boot-mode/Makefile | 9 ++ .../{ph1-pro4/boot-mode.c => boot-mode/boot-mode-ph1-ld4.c} | 21 ++-- arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-pro5.c | 75 +++++++++++++ .../{ph1-sld3/boot-mode.c => boot-mode/boot-mode-ph1-sld3.c} | 23 ++-- arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c | 75 +++++++++++++ arch/arm/mach-uniphier/boot-mode/boot-mode.c | 45 ++++++++ arch/arm/mach-uniphier/clk/Makefile | 7 ++ arch/arm/mach-uniphier/{ph1-ld4/clkrst_init.c => clk/clk-ph1-ld4.c} | 3 +- arch/arm/mach-uniphier/{ph1-pro4/clkrst_init.c => clk/clk-ph1-pro4.c} | 3 +- arch/arm/mach-uniphier/clk/clk-ph1-pro5.c | 44 ++++++++ arch/arm/mach-uniphier/clk/clk-proxstream2.c | 50 +++++++++ arch/arm/mach-uniphier/cmd_pinmon.c | 43 ++++++-- arch/arm/mach-uniphier/ddrphy/Makefile | 3 + .../arm/mach-uniphier/{ph1-ld4/ddrphy_init.c => ddrphy/ddrphy-ph1-ld4.c} | 4 +- .../mach-uniphier/{ph1-pro4/ddrphy_init.c => ddrphy/ddrphy-ph1-pro4.c} | 4 +- .../mach-uniphier/{ph1-sld8/ddrphy_init.c => ddrphy/ddrphy-ph1-sld8.c} | 4 +- arch/arm/mach-uniphier/{ddrphy_training.c => ddrphy/ddrphy-training.c} | 0 arch/arm/mach-uniphier/debug_ll.S | 185 +++++++++++++++++++++++++++++++++ arch/arm/mach-uniphier/dram_init.c | 51 ++++++++- arch/arm/mach-uniphier/early-clk/Makefile | 7 ++ .../{ph1-pro4/early_clkrst_init.c => early-clk/early-clk-ph1-ld4.c} | 5 +- arch/arm/mach-uniphier/early-clk/early-clk-ph1-pro5.c | 39 +++++++ arch/arm/mach-uniphier/early-clk/early-clk-proxstream2.c | 44 ++++++++ arch/arm/mach-uniphier/early-pinctrl/Makefile | 1 + arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-ph1-sld3.c | 26 +++++ arch/arm/mach-uniphier/include/mach/board.h | 42 -------- arch/arm/mach-uniphier/include/mach/boot-device.h | 15 ++- arch/arm/mach-uniphier/include/mach/ddrphy-regs.h | 7 +- arch/arm/mach-uniphier/include/mach/debug-uart.S | 23 ---- arch/arm/mach-uniphier/include/mach/init.h | 99 ++++++++++++++++++ arch/arm/mach-uniphier/include/mach/led.h | 100 ------------------ arch/arm/mach-uniphier/include/mach/micro-support-card.h | 39 +++++++ arch/arm/mach-uniphier/include/mach/platdevice.h | 24 ----- arch/arm/mach-uniphier/include/mach/sc-regs.h | 25 ++++- arch/arm/mach-uniphier/include/mach/sg-regs.h | 50 +++++---- arch/arm/mach-uniphier/include/mach/soc_info.h | 63 +++++++++++ arch/arm/mach-uniphier/init/Makefile | 9 ++ arch/arm/mach-uniphier/init/init-ph1-ld4.c | 60 +++++++++++ arch/arm/mach-uniphier/init/init-ph1-pro4.c | 58 +++++++++++ arch/arm/mach-uniphier/init/init-ph1-pro5.c | 42 ++++++++ arch/arm/mach-uniphier/init/init-ph1-sld3.c | 53 ++++++++++ arch/arm/mach-uniphier/init/init-ph1-sld8.c | 60 +++++++++++ arch/arm/mach-uniphier/init/init-proxstream2.c | 41 ++++++++ arch/arm/mach-uniphier/init/init.c | 58 +++++++++++ arch/arm/mach-uniphier/init_page_table.S | 6 +- arch/arm/mach-uniphier/lowlevel_init.S | 3 +- arch/arm/mach-uniphier/memconf.c | 103 ------------------ arch/arm/mach-uniphier/memconf/Makefile | 4 + arch/arm/mach-uniphier/memconf/memconf-ph1-sld3.c | 59 +++++++++++ arch/arm/mach-uniphier/memconf/memconf-proxstream2.c | 64 ++++++++++++ arch/arm/mach-uniphier/memconf/memconf.c | 104 ++++++++++++++++++ arch/arm/mach-uniphier/{support_card.c => micro-support-card.c} | 169 +++++++++++++++--------------- arch/arm/mach-uniphier/ph1-ld4/Makefile | 15 --- arch/arm/mach-uniphier/ph1-ld4/boot-mode.c | 1 - arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c | 1 - arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c | 27 ----- arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S | 29 ------ arch/arm/mach-uniphier/ph1-ld4/pinctrl.c | 48 --------- arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c | 1 - arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c | 49 --------- arch/arm/mach-uniphier/ph1-ld4/sg_init.c | 18 ---- arch/arm/mach-uniphier/ph1-pro4/Makefile | 15 --- arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c | 26 ----- arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S | 39 ------- arch/arm/mach-uniphier/ph1-pro4/pinctrl.c | 49 --------- arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c | 42 -------- arch/arm/mach-uniphier/ph1-pro4/sg_init.c | 18 ---- arch/arm/mach-uniphier/ph1-sld3/Makefile | 15 --- arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c | 1 - arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c | 1 - arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c | 23 ---- arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S | 33 ------ arch/arm/mach-uniphier/ph1-sld3/memconf.c | 52 --------- arch/arm/mach-uniphier/ph1-sld3/pinctrl.c | 24 ----- arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c | 37 ------- arch/arm/mach-uniphier/ph1-sld3/sg_init.c | 9 -- arch/arm/mach-uniphier/ph1-sld3/umc_init.c | 15 --- arch/arm/mach-uniphier/ph1-sld8/Makefile | 1 - arch/arm/mach-uniphier/ph1-sld8/bcu_init.c | 1 - arch/arm/mach-uniphier/ph1-sld8/boot-mode.c | 1 - arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c | 1 - arch/arm/mach-uniphier/ph1-sld8/early_clkrst_init.c | 1 - arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c | 27 ----- arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S | 29 ------ arch/arm/mach-uniphier/ph1-sld8/pinctrl.c | 51 --------- arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c | 1 - arch/arm/mach-uniphier/ph1-sld8/sbc_init.c | 1 - arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c | 57 ---------- arch/arm/mach-uniphier/ph1-sld8/sg_init.c | 1 - arch/arm/mach-uniphier/pinctrl/Makefile | 7 ++ arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c | 49 +++++++++ arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c | 45 ++++++++ arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c | 50 +++++++++ arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c | 43 ++++++++ arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld3.c | 25 +++++ arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c | 43 ++++++++ arch/arm/mach-uniphier/pinctrl/pinctrl-proxstream2.c | 45 ++++++++ arch/arm/mach-uniphier/pll/Makefile | 8 ++ arch/arm/mach-uniphier/{ph1-ld4/pll_init.c => pll/pll-init-ph1-ld4.c} | 34 ++++-- arch/arm/mach-uniphier/{ph1-pro4/pll_init.c => pll/pll-init-ph1-pro4.c} | 36 ++++--- arch/arm/mach-uniphier/{ph1-sld3/pll_init.c => pll/pll-init-ph1-sld3.c} | 5 +- arch/arm/mach-uniphier/{ph1-sld8/pll_init.c => pll/pll-init-ph1-sld8.c} | 5 +- .../{ph1-pro4/pll_spectrum.c => pll/pll-spectrum-ph1-ld4.c} | 6 +- .../{ph1-sld3/pll_spectrum.c => pll/pll-spectrum-ph1-sld3.c} | 5 +- arch/arm/mach-uniphier/print_misc_info.c | 2 +- arch/arm/mach-uniphier/sbc/Makefile | 7 ++ arch/arm/mach-uniphier/{ph1-ld4/sbc_init.c => sbc/sbc-ph1-ld4.c} | 17 +-- arch/arm/mach-uniphier/{ph1-pro4/sbc_init.c => sbc/sbc-ph1-pro4.c} | 17 +-- arch/arm/mach-uniphier/{ph1-sld3/sbc_init.c => sbc/sbc-ph1-sld3.c} | 19 ++-- arch/arm/mach-uniphier/sbc/sbc-proxstream2.c | 48 +++++++++ arch/arm/mach-uniphier/soc_info.c | 61 +++++++++++ arch/arm/mach-uniphier/spl.c | 76 -------------- arch/arm/mach-uniphier/umc/Makefile | 3 + arch/arm/mach-uniphier/{ph1-ld4/umc_init.c => umc/umc-ph1-ld4.c} | 30 +++--- arch/arm/mach-uniphier/{ph1-pro4/umc_init.c => umc/umc-ph1-pro4.c} | 36 ++++--- arch/arm/mach-uniphier/{ph1-sld8/umc_init.c => umc/umc-ph1-sld8.c} | 30 +++--- configs/ph1_ld4_defconfig | 9 +- configs/ph1_ld6b_defconfig | 30 ++++++ configs/ph1_pro4_defconfig | 8 +- configs/ph1_pro5_defconfig | 30 ++++++ configs/ph1_sld3_defconfig | 5 +- configs/ph1_sld8_defconfig | 9 +- doc/README.uniphier | 12 +++ drivers/pinctrl/Kconfig | 2 + drivers/pinctrl/Makefile | 2 + drivers/pinctrl/uniphier/Kconfig | 42 ++++++++ drivers/pinctrl/uniphier/Makefile | 8 ++ drivers/pinctrl/uniphier/pinctrl-ph1-ld4.c | 133 ++++++++++++++++++++++++ drivers/pinctrl/uniphier/pinctrl-ph1-ld6b.c | 133 ++++++++++++++++++++++++ drivers/pinctrl/uniphier/pinctrl-ph1-pro4.c | 130 +++++++++++++++++++++++ drivers/pinctrl/uniphier/pinctrl-ph1-pro5.c | 144 +++++++++++++++++++++++++ drivers/pinctrl/uniphier/pinctrl-ph1-sld8.c | 141 +++++++++++++++++++++++++ drivers/pinctrl/uniphier/pinctrl-proxstream2.c | 140 +++++++++++++++++++++++++ drivers/pinctrl/uniphier/pinctrl-uniphier-core.c | 154 +++++++++++++++++++++++++++ drivers/pinctrl/uniphier/pinctrl-uniphier.h | 113 ++++++++++++++++++++ include/configs/uniphier.h | 113 ++++---------------- 154 files changed, 4061 insertions(+), 1624 deletions(-) create mode 100644 arch/arm/dts/uniphier-ph1-pro5-4kbox.dts create mode 100644 arch/arm/dts/uniphier-proxstream2-gentil.dts create mode 100644 arch/arm/dts/uniphier-proxstream2-vodka.dts create mode 100644 arch/arm/mach-uniphier/bcu/Makefile rename arch/arm/mach-uniphier/{ph1-ld4/bcu_init.c => bcu/bcu-ph1-ld4.c} (84%) rename arch/arm/mach-uniphier/{ph1-sld3/bcu_init.c => bcu/bcu-ph1-sld3.c} (84%) create mode 100644 arch/arm/mach-uniphier/boards.c create mode 100644 arch/arm/mach-uniphier/boot-mode/Makefile rename arch/arm/mach-uniphier/{ph1-pro4/boot-mode.c => boot-mode/boot-mode-ph1-ld4.c} (88%) create mode 100644 arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-pro5.c rename arch/arm/mach-uniphier/{ph1-sld3/boot-mode.c => boot-mode/boot-mode-ph1-sld3.c} (89%) create mode 100644 arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c create mode 100644 arch/arm/mach-uniphier/boot-mode/boot-mode.c create mode 100644 arch/arm/mach-uniphier/clk/Makefile rename arch/arm/mach-uniphier/{ph1-ld4/clkrst_init.c => clk/clk-ph1-ld4.c} (94%) rename arch/arm/mach-uniphier/{ph1-pro4/clkrst_init.c => clk/clk-ph1-pro4.c} (96%) create mode 100644 arch/arm/mach-uniphier/clk/clk-ph1-pro5.c create mode 100644 arch/arm/mach-uniphier/clk/clk-proxstream2.c create mode 100644 arch/arm/mach-uniphier/ddrphy/Makefile rename arch/arm/mach-uniphier/{ph1-ld4/ddrphy_init.c => ddrphy/ddrphy-ph1-ld4.c} (95%) rename arch/arm/mach-uniphier/{ph1-pro4/ddrphy_init.c => ddrphy/ddrphy-ph1-pro4.c} (95%) rename arch/arm/mach-uniphier/{ph1-sld8/ddrphy_init.c => ddrphy/ddrphy-ph1-sld8.c} (95%) rename arch/arm/mach-uniphier/{ddrphy_training.c => ddrphy/ddrphy-training.c} (100%) create mode 100644 arch/arm/mach-uniphier/debug_ll.S create mode 100644 arch/arm/mach-uniphier/early-clk/Makefile rename arch/arm/mach-uniphier/{ph1-pro4/early_clkrst_init.c => early-clk/early-clk-ph1-ld4.c} (86%) create mode 100644 arch/arm/mach-uniphier/early-clk/early-clk-ph1-pro5.c create mode 100644 arch/arm/mach-uniphier/early-clk/early-clk-proxstream2.c create mode 100644 arch/arm/mach-uniphier/early-pinctrl/Makefile create mode 100644 arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-ph1-sld3.c delete mode 100644 arch/arm/mach-uniphier/include/mach/board.h delete mode 100644 arch/arm/mach-uniphier/include/mach/debug-uart.S create mode 100644 arch/arm/mach-uniphier/include/mach/init.h delete mode 100644 arch/arm/mach-uniphier/include/mach/led.h create mode 100644 arch/arm/mach-uniphier/include/mach/micro-support-card.h delete mode 100644 arch/arm/mach-uniphier/include/mach/platdevice.h create mode 100644 arch/arm/mach-uniphier/include/mach/soc_info.h create mode 100644 arch/arm/mach-uniphier/init/Makefile create mode 100644 arch/arm/mach-uniphier/init/init-ph1-ld4.c create mode 100644 arch/arm/mach-uniphier/init/init-ph1-pro4.c create mode 100644 arch/arm/mach-uniphier/init/init-ph1-pro5.c create mode 100644 arch/arm/mach-uniphier/init/init-ph1-sld3.c create mode 100644 arch/arm/mach-uniphier/init/init-ph1-sld8.c create mode 100644 arch/arm/mach-uniphier/init/init-proxstream2.c create mode 100644 arch/arm/mach-uniphier/init/init.c delete mode 100644 arch/arm/mach-uniphier/memconf.c create mode 100644 arch/arm/mach-uniphier/memconf/Makefile create mode 100644 arch/arm/mach-uniphier/memconf/memconf-ph1-sld3.c create mode 100644 arch/arm/mach-uniphier/memconf/memconf-proxstream2.c create mode 100644 arch/arm/mach-uniphier/memconf/memconf.c rename arch/arm/mach-uniphier/{support_card.c => micro-support-card.c} (53%) delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/Makefile delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/boot-mode.c delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/pinctrl.c delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/sg_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/Makefile delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/pinctrl.c delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/sg_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/Makefile delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/memconf.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/pinctrl.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/sg_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/umc_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/Makefile delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/bcu_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/boot-mode.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/early_clkrst_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/pinctrl.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/sbc_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/sg_init.c create mode 100644 arch/arm/mach-uniphier/pinctrl/Makefile create mode 100644 arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c create mode 100644 arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c create mode 100644 arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c create mode 100644 arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c create mode 100644 arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld3.c create mode 100644 arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c create mode 100644 arch/arm/mach-uniphier/pinctrl/pinctrl-proxstream2.c create mode 100644 arch/arm/mach-uniphier/pll/Makefile rename arch/arm/mach-uniphier/{ph1-ld4/pll_init.c => pll/pll-init-ph1-ld4.c} (90%) rename arch/arm/mach-uniphier/{ph1-pro4/pll_init.c => pll/pll-init-ph1-pro4.c} (88%) rename arch/arm/mach-uniphier/{ph1-sld3/pll_init.c => pll/pll-init-ph1-sld3.c} (62%) rename arch/arm/mach-uniphier/{ph1-sld8/pll_init.c => pll/pll-init-ph1-sld8.c} (97%) rename arch/arm/mach-uniphier/{ph1-pro4/pll_spectrum.c => pll/pll-spectrum-ph1-ld4.c} (72%) rename arch/arm/mach-uniphier/{ph1-sld3/pll_spectrum.c => pll/pll-spectrum-ph1-sld3.c} (73%) create mode 100644 arch/arm/mach-uniphier/sbc/Makefile rename arch/arm/mach-uniphier/{ph1-ld4/sbc_init.c => sbc/sbc-ph1-ld4.c} (67%) rename arch/arm/mach-uniphier/{ph1-pro4/sbc_init.c => sbc/sbc-ph1-pro4.c} (64%) rename arch/arm/mach-uniphier/{ph1-sld3/sbc_init.c => sbc/sbc-ph1-sld3.c} (62%) create mode 100644 arch/arm/mach-uniphier/sbc/sbc-proxstream2.c create mode 100644 arch/arm/mach-uniphier/soc_info.c delete mode 100644 arch/arm/mach-uniphier/spl.c create mode 100644 arch/arm/mach-uniphier/umc/Makefile rename arch/arm/mach-uniphier/{ph1-ld4/umc_init.c => umc/umc-ph1-ld4.c} (88%) rename arch/arm/mach-uniphier/{ph1-pro4/umc_init.c => umc/umc-ph1-pro4.c} (85%) rename arch/arm/mach-uniphier/{ph1-sld8/umc_init.c => umc/umc-ph1-sld8.c} (87%) create mode 100644 configs/ph1_ld6b_defconfig create mode 100644 configs/ph1_pro5_defconfig create mode 100644 drivers/pinctrl/uniphier/Kconfig create mode 100644 drivers/pinctrl/uniphier/Makefile create mode 100644 drivers/pinctrl/uniphier/pinctrl-ph1-ld4.c create mode 100644 drivers/pinctrl/uniphier/pinctrl-ph1-ld6b.c create mode 100644 drivers/pinctrl/uniphier/pinctrl-ph1-pro4.c create mode 100644 drivers/pinctrl/uniphier/pinctrl-ph1-pro5.c create mode 100644 drivers/pinctrl/uniphier/pinctrl-ph1-sld8.c create mode 100644 drivers/pinctrl/uniphier/pinctrl-proxstream2.c create mode 100644 drivers/pinctrl/uniphier/pinctrl-uniphier-core.c create mode 100644 drivers/pinctrl/uniphier/pinctrl-uniphier.h -- Best Regards Masahiro Yamada

2 1

[U-Boot] [PULL] Please pull u-boot-imx
by Stefano Babic 24 Sep '15

24 Sep '15

Hi Tom, please pull from u-boot-imx, thanks ! git://www.denx.de/git/u-boot-imx.git master for you to fetch changes up to f697c2acca9ff02c9b0cf480a4a726ed9626a53a: imx: fix coding style (2015-09-24 11:32:38 +0200) ---------------------------------------------------------------- Fabio Estevam (9): mx6sabre_common: Add Fastboot support mx7dsabresd: Staticize when possible mx7dsabreasd: Remove dead code mx7dsabresd: Include USB header mx7dsabresd: Remove get_board_rev() mx7dsabresd: Remove unused config option mx6ul_14x14_evk: Remove dead code mx6ul_14x14_evk: Staticize when possible mx6ul_14x14_evk: Remove get_board_rev() Heiko Schocher (1): imx6, aristaintetos2: add me as maintainer Otavio Salvador (3): cgtqmx6eval: Fit into a single line cgtqmx6eval: Add a maintainer entry cgtqmx6eval: Add USB Mass Storage support Peng Fan (12): imx-common: fix iomux settings imx: wdog: correct wcr register settings imx: mx7dsabresd set wdog SRS bit imx: mx7: drop select CPU_V7 for board target imx: mx7dsabresd: drop SYS_SOC from board Kconfig mtd: nand: mxs check maximum ecc that platfrom supports imx-common: consider mux_ctrl_ofs when setting mux_mode imx: boards: Add maintainers info imx: mx7: discard unused global variable imx-common: wrap boot_mode_apply with CONFIG_CMD_BMODE imx: mx7dsabresd: drop code for CONFIG_CMD_BMODE imx: fix coding style arch/arm/cpu/armv7/mx7/Kconfig | 1 - arch/arm/cpu/armv7/mx7/soc.c | 4 +--- arch/arm/imx-common/init.c | 5 +++-- arch/arm/imx-common/iomux-v3.c | 6 ++---- board/aristainetos/MAINTAINERS | 1 + board/congatec/cgtqmx6eval/MAINTAINERS | 4 ++-- board/congatec/cgtqmx6eval/cgtqmx6eval.c | 3 +-- board/freescale/mx6qsabreauto/MAINTAINERS | 2 ++ board/freescale/mx6slevk/MAINTAINERS | 2 ++ board/freescale/mx6ul_14x14_evk/MAINTAINERS | 1 + board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 52 ++-------------------------------------------------- board/freescale/mx7dsabresd/Kconfig | 3 --- board/freescale/mx7dsabresd/mx7dsabresd.c | 74 +++++++++++++------------------------------------------------------------- drivers/mtd/nand/mxs_nand.c | 9 ++++++++- drivers/watchdog/imx_watchdog.c | 3 ++- include/configs/cgtqmx6eval.h | 14 ++++++++++++++ include/configs/mx6sabre_common.h | 6 ++++++ include/configs/mx7dsabresd.h | 3 --- 18 files changed, 60 insertions(+), 133 deletions(-) -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic(a)denx.de =====================================================================

2 1

[U-Boot] [PULL] u-boot-socfpga/master
by Marek Vasut 24 Sep '15

24 Sep '15

Hi, here are some minor SoCFPGA fixes: The following changes since commit 8a5f6129d1450f5ff92a55cfcfd7b96ee019e303: pinctrl: move dm_scan_fdt_node() out of pinctrl uclass (2015-09-19 15:42:15 -0600) are available in the git repository at: git://git.denx.de/u-boot-socfpga.git for you to fetch changes up to 4348f36bbbc91633022a39739c584a83af1762d8: arm: socfpga: update MAINTAINERS' file for cyclone5_socdk and arria5_socdk (2015-09-23 03:55:28 +0200) ---------------------------------------------------------------- Dinh Nguyen (2): arm: socfpga: rename socfpga_cyclone5 and socfpga_arria5 config files arm: socfpga: update MAINTAINERS' file for cyclone5_socdk and arria5_socdk Stefan Roese (1): arm: socfpga: Fix cache configuration arch/arm/mach-socfpga/Kconfig | 4 ++-- board/altera/arria5-socdk/MAINTAINERS | 4 ++-- board/altera/cyclone5-socdk/MAINTAINERS | 4 ++-- include/configs/{socfpga_arria5.h => socfpga_arria5_socdk.h} | 0 include/configs/socfpga_common.h | 1 - include/configs/{socfpga_cyclone5.h => socfpga_cyclone5_socdk.h} | 0 6 files changed, 6 insertions(+), 7 deletions(-) rename include/configs/{socfpga_arria5.h => socfpga_arria5_socdk.h} (100%) rename include/configs/{socfpga_cyclone5.h => socfpga_cyclone5_socdk.h} (100%)

2 2

[U-Boot] Please pull fsl-qoriq master
by York Sun 24 Sep '15

24 Sep '15

Tom, The following changes since commit 1fb8d7933924aa5deb7e722d64c1d9fc7f0b2b82: Merge git://git.denx.de/u-boot-x86 (2015-09-17 17:00:08 -0400) are available in the git repository at: git://git.denx.de/u-boot-fsl-qoriq.git master for you to fetch changes up to a857d5f835c53f7b66de61b19120ea1188e94999: drivers/net/vsc9953: Add GPL-2.0+ SPDX-License-Identifier (2015-09-21 08:29:48 -0700) ---------------------------------------------------------------- Codrin Ciubotariu (16): drivers/net/vsc9953: Remove 'CONFIG_' from macros' name drivers/net/vsc9953: Cleanup patch drivers/net/vsc9953: Fix bug when enabling a port drivers/net/vsc9953: Fix missing reserved register include/bitfield: Add new bitfield operations drivers/net/vsc9953: Add default configuration for VSC9953 L2 Switch common/cmd_ethsw: Add generic commands for Ethernet Switches drivers/net/vsc9953: Use the generic Ethernet Switch parser drivers/net/vsc9953: Add command to show/clear port counters drivers/net/vsc9953: Add commands to enable/disable HW learning common/env_flags.c: Add function to validate a MAC address drivers/net/vsc9953: Add commands to manipulate the FDB for VSC9953 drivers/net/vsc9953: Add VLAN commands for VSC9953 drivers/net/vsc9953: Add command for shared/private VLAN learning drivers/net/vsc9953: Add commands for VLAN ingress filtering drivers/net/vsc9953: Add GPL-2.0+ SPDX-License-Identifier common/Makefile | 1 + common/cmd_ethsw.c | 1027 ++++++++++++++++++++ common/env_flags.c | 40 +- drivers/net/vsc9953.c | 2246 +++++++++++++++++++++++++++++++++++++++----- include/bitfield.h | 32 + include/configs/T104xRDB.h | 2 +- include/env_flags.h | 7 + include/ethsw.h | 95 ++ include/vsc9953.h | 389 ++++++-- 9 files changed, 3504 insertions(+), 335 deletions(-) create mode 100644 common/cmd_ethsw.c create mode 100644 include/ethsw.h Thanks. York

2 1

[U-Boot] [PATCHv3] arm: socfpga: Enable saveenv for SD/MMC
by dinguyen＠opensource.altera.com 24 Sep '15

24 Sep '15

From: Dinh Nguyen <dinguyen(a)opensource.altera.com> Enable the able to save the environment variables when SD/MMC is used. Signed-off-by: Dinh Nguyen <dinguyen(a)opensource.altera.com> --- v3: Only define ENV_IS_NOWHERE if env is not in MMC, NAND, FAT, and SPI_FLASH v2: Move this option to be on a per-board basis Add config for socfpga_cyclone5 and socfpga_arria5 --- include/configs/socfpga_arria5_socdk.h | 4 ++++ include/configs/socfpga_common.h | 5 +++++ include/configs/socfpga_cyclone5_socdk.h | 4 ++++ include/configs/socfpga_de0_nano_soc.h | 4 ++++ include/configs/socfpga_sockit.h | 4 ++++ 5 files changed, 21 insertions(+) diff --git a/include/configs/socfpga_arria5_socdk.h b/include/configs/socfpga_arria5_socdk.h index 3193684..b75b0a2 100644 --- a/include/configs/socfpga_arria5_socdk.h +++ b/include/configs/socfpga_arria5_socdk.h @@ -59,6 +59,10 @@ #endif +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */ +#define CONFIG_ENV_OFFSET 512 /* just after the MBR */ + /* USB */ #ifdef CONFIG_CMD_USB #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index a2811ba..b3fba5b 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -281,7 +281,12 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #define CONFIG_SYS_CONSOLE_IS_IN_ENV #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE #define CONFIG_SYS_CONSOLE_ENV_OVERWRITE +#if !defined CONFIG_ENV_IS_IN_MMC && \ + !defined CONFIG_ENV_IS_IN_NAND && \ + !defined CONFIG_ENV_IS_IN_FAT && \ + !defined CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_IS_NOWHERE +#endif #define CONFIG_ENV_SIZE 4096 /* diff --git a/include/configs/socfpga_cyclone5_socdk.h b/include/configs/socfpga_cyclone5_socdk.h index 9e733e5..fa67b25 100644 --- a/include/configs/socfpga_cyclone5_socdk.h +++ b/include/configs/socfpga_cyclone5_socdk.h @@ -59,6 +59,10 @@ #endif +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */ +#define CONFIG_ENV_OFFSET 512 /* just after the MBR */ + /* USB */ #ifdef CONFIG_CMD_USB #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS diff --git a/include/configs/socfpga_de0_nano_soc.h b/include/configs/socfpga_de0_nano_soc.h index 2508d03..191e1f7 100644 --- a/include/configs/socfpga_de0_nano_soc.h +++ b/include/configs/socfpga_de0_nano_soc.h @@ -55,6 +55,10 @@ #endif +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */ +#define CONFIG_ENV_OFFSET 512 /* just after the MBR */ + /* USB */ #ifdef CONFIG_CMD_USB #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS diff --git a/include/configs/socfpga_sockit.h b/include/configs/socfpga_sockit.h index 747e988..6c71ef4 100644 --- a/include/configs/socfpga_sockit.h +++ b/include/configs/socfpga_sockit.h @@ -59,6 +59,10 @@ #endif +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */ +#define CONFIG_ENV_OFFSET 512 /* just after the MBR */ + /* USB */ #ifdef CONFIG_CMD_USB #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS -- 2.4.5

3 3