July 2015 - U-Boot

[U-Boot] possible string overflow issue.
by Joya Cruz, Alejandro 10 Jul '15

10 Jul '15

I was running a static code analysis. And found a possible string overflow, this occurs in common/cli_simple.c line 278 It might overrun the 512 byte destination string lastcommand by writing 513 bytes from console_buffer Hopefully someone could be able to review with more knowledge in this code. Regards, Alejandro Fco Joya Cruz Intel Guadalajara Design Center Phone: +52 33 1645 4987 Email: Alejandro.joya.cruz(a)intel.com<mailto:Alejandro.joya.cruz@intel.com>

1 0

[U-Boot] [PATCH] Tegra: PLL: fix per-SoC pllinfo table regression
by Marcel Ziswiler 10 Jul '15

10 Jul '15

From: Marcel Ziswiler <marcel.ziswiler(a)toradex.com> The following commit introduced per-SoC pllinfo tables but unfortunately there were two generic issues (e.g. mask vs. shift mixed up and wrongly used parenthesis) plus two each masks being wrong in the pllinfo tables for T20/T30 which this patch fixes. commit aeea4204b340afe063ea38c36a0a60ce33015e7d Tegra: PLL: use per-SoC pllinfo table instead of PLL_DIVM/N/P, etc. Tested both on Colibri T20 as well as Colibri T30. Signed-off-by: Marcel Ziswiler <marcel.ziswiler(a)toradex.com> --- Please note that this patch applies to the next branch of the u-boot-tegra custodian tree. arch/arm/mach-tegra/clock.c | 4 ++-- arch/arm/mach-tegra/tegra20/clock.c | 4 ++-- arch/arm/mach-tegra/tegra30/clock.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index 0c5ae83..6f4dcc6 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -474,7 +474,7 @@ unsigned clock_get_rate(enum clock_id clkid) * PLLU uses p_mask/p_shift for VCO on all but T210, * T210 uses normal DIVP. Handled in pllinfo table. */ - divm <<= (base >> pllinfo->p_mask) & pllinfo->p_shift; + divm <<= (base >> pllinfo->p_shift) & pllinfo->p_mask; do_div(rate, divm); return rate; } @@ -535,7 +535,7 @@ int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon) /* Set cpcon (KCP) to PLL_MISC */ misc_reg = readl(&pll->pll_misc); - misc_reg &= ~(pllinfo->kcp_mask) << pllinfo->kcp_shift; + misc_reg &= ~(pllinfo->kcp_mask << pllinfo->kcp_shift); misc_reg |= cpcon << pllinfo->kcp_shift; writel(misc_reg, &pll->pll_misc); diff --git a/arch/arm/mach-tegra/tegra20/clock.c b/arch/arm/mach-tegra/tegra20/clock.c index 0de5365..41e19a6 100644 --- a/arch/arm/mach-tegra/tegra20/clock.c +++ b/arch/arm/mach-tegra/tegra20/clock.c @@ -366,9 +366,9 @@ struct clk_pll_info tegra_pll_info_table[CLOCK_ID_PLL_COUNT] = { * If lock_ena or lock_det are >31, they're not used in that PLL. */ - { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x0F, + { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x0F, .lock_ena = 24, .lock_det = 27, .kcp_shift = 28, .kcp_mask = 3, .kvco_shift = 27, .kvco_mask = 1 }, /* PLLC */ - { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 0, .p_mask = 0, + { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 0, .p_mask = 0, .lock_ena = 0, .lock_det = 27, .kcp_shift = 1, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 }, /* PLLM */ { .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07, .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLP */ diff --git a/arch/arm/mach-tegra/tegra30/clock.c b/arch/arm/mach-tegra/tegra30/clock.c index 23496b0..3710a50 100644 --- a/arch/arm/mach-tegra/tegra30/clock.c +++ b/arch/arm/mach-tegra/tegra30/clock.c @@ -415,9 +415,9 @@ struct clk_pll_info tegra_pll_info_table[CLOCK_ID_PLL_COUNT] = { * If lock_ena or lock_det are >31, they're not used in that PLL. */ - { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x0F, + { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x0F, .lock_ena = 24, .lock_det = 27, .kcp_shift = 28, .kcp_mask = 3, .kvco_shift = 27, .kvco_mask = 1 }, /* PLLC */ - { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 0, .p_mask = 0, + { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 0, .p_mask = 0, .lock_ena = 0, .lock_det = 27, .kcp_shift = 1, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 }, /* PLLM */ { .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07, .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLP */ -- 1.9.3

2 1

[U-Boot] [PATCH V4 1/6] imx: add dummpy cpu type MXC_CPU_MX6QP/DP
by Peng Fan 10 Jul '15

10 Jul '15

Add dummy cpu type MXC_CPU_MX6QP/DP. Since i.MX6QP use a revision 2, but with cpu type i.MX6Q, we need the MXC_CPU_MX6QP and to decrease major with 1 to let print_cpuinfo print the correct info. This patch also fix is_mx6dqp(), since get_cpu_rev can return MXC_CPU_MX6QP and MXC_CPU_MX6DP, we should use: (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP)). Signed-off-by: Peng Fan <Peng.Fan(a)freescale.com> --- Changes v4: Address Fabio's comments, Change Quad-Plus to Dual-Plus for i.MX6DP. Changes v3: New patch This patch is to make print_cpuinfo display correct cpu info, also fix is_mx6dqp Changes v2: none arch/arm/cpu/armv7/mx6/soc.c | 11 +++++++++-- arch/arm/imx-common/cpu.c | 4 ++++ arch/arm/include/asm/arch-imx/cpu.h | 2 ++ arch/arm/include/asm/arch-mx6/sys_proto.h | 4 +--- 4 files changed, 16 insertions(+), 5 deletions(-) diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 29de624..d3a3b2e 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -62,12 +62,12 @@ u32 get_cpu_rev(void) struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; u32 reg = readl(&anatop->digprog_sololite); u32 type = ((reg >> 16) & 0xff); - u32 major; + u32 major, cfg = 0; if (type != MXC_CPU_MX6SL) { reg = readl(&anatop->digprog); struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR; - u32 cfg = readl(&scu->config) & 3; + cfg = readl(&scu->config) & 3; type = ((reg >> 16) & 0xff); if (type == MXC_CPU_MX6DL) { if (!cfg) @@ -81,6 +81,13 @@ u32 get_cpu_rev(void) } major = ((reg >> 8) & 0xff); + if ((major >= 1) && + ((type == MXC_CPU_MX6Q) || (type == MXC_CPU_MX6D))) { + major--; + type = MXC_CPU_MX6QP; + if (cfg == 1) + type = MXC_CPU_MX6DP; + } reg &= 0xff; /* mx6 silicon revision */ return (type << 12) | (reg + (0x10 * (major + 1))); } diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index 5e56cfe..096d22e 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -122,6 +122,10 @@ unsigned imx_ddr_size(void) const char *get_imx_type(u32 imxtype) { switch (imxtype) { + case MXC_CPU_MX6QP: + return "6QP"; /* Quad-Plus version of the mx6 */ + case MXC_CPU_MX6DP: + return "6DP"; /* Dual-Plus version of the mx6 */ case MXC_CPU_MX6Q: return "6Q"; /* Quad-core version of the mx6 */ case MXC_CPU_MX6D: diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h index 4715f4e..99e0e32 100644 --- a/arch/arm/include/asm/arch-imx/cpu.h +++ b/arch/arm/include/asm/arch-imx/cpu.h @@ -12,6 +12,8 @@ #define MXC_CPU_MX6Q 0x63 #define MXC_CPU_MX6D 0x64 #define MXC_CPU_MX6SOLO 0x65 /* dummy ID */ +#define MXC_CPU_MX6DP 0x68 +#define MXC_CPU_MX6QP 0x69 #define CS0_128 0 #define CS0_64M_CS1_64M 1 diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h index 28c77a4..eee8ca8 100644 --- a/arch/arm/include/asm/arch-mx6/sys_proto.h +++ b/arch/arm/include/asm/arch-mx6/sys_proto.h @@ -30,9 +30,7 @@ const char *get_imx_type(u32 imxtype); unsigned imx_ddr_size(void); void set_chipselect_size(int const); -#define is_mx6dqp() ((is_cpu_type(MXC_CPU_MX6Q) || \ - is_cpu_type(MXC_CPU_MX6D)) && \ - (soc_rev() >= CHIP_REV_2_0)) +#define is_mx6dqp() (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP)) /* * Initializes on-chip ethernet controllers. -- 1.8.4

3 12

[U-Boot] [PATCH] README.distro: fix typos
by Masahiro Yamada 10 Jul '15

10 Jul '15

The word "partition" is doubled. Keep decent forms for the following lines. Also, fix some other typos while we are here. Signed-off-by: Masahiro Yamada <yamada.masahiro(a)socionext.com> --- doc/README.distro | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/doc/README.distro b/doc/README.distro index 0308a4c..9e4722a 100644 --- a/doc/README.distro +++ b/doc/README.distro @@ -28,7 +28,7 @@ decoupling distro install/boot logic from any knowledge of the bootloader. This model assumes that boards will load boot configuration files from a regular storage mechanism (eMMC, SD card, USB Disk, SATA disk, etc.) with -a standard partitioning scheme (MBR, GPT). Boards that cannnot support this +a standard partitioning scheme (MBR, GPT). Boards that cannot support this storage model are outside the scope of this document, and may still need board-specific installer/boot-configuration support in a distro. @@ -37,9 +37,9 @@ that contains U-Boot, and that the user has somehow installed U-Boot to this flash before running the distro installer. Even on boards that do not conform to this aspect of the model, the extent of the board-specific support in the distro installer logic would be to install a board-specific U-Boot package to -the boot partition partition during installation. This distro-supplied U-Boot -can still implement the same features as on any other board, and hence the -distro's boot configuration file generation logic can still be board-agnostic. +the boot partition during installation. This distro-supplied U-Boot can still +implement the same features as on any other board, and hence the distro's boot +configuration file generation logic can still be board-agnostic. Locating Bootable Disks ----------------------- @@ -61,7 +61,7 @@ any other bootloader) will find those boot files and execute them. This is conceptually identical to creating a grub2 configuration file on a desktop PC. -Note that in the absense of any partition that is explicitly marked bootable, +Note that in the absence of any partition that is explicitly marked bootable, U-Boot falls back to searching the first valid partition of a disk for boot configuration files. Other bootloaders are recommended to do the same, since I believe that partition table bootable flags aren't so commonly used outside @@ -238,7 +238,7 @@ kernel_addr_r: The kernel should be located within the first 128M of RAM in order for the kernel CONFIG_AUTO_ZRELADDR option to work, which is likely enabled on any distro kernel. Since the kernel will decompress itself to 0x8000 after the - start of RAM, kernel_addr_rshould not overlap that area, or the kernel will + start of RAM, kernel_addr_r should not overlap that area, or the kernel will have to copy itself somewhere else first before decompression. A size of 16MB for the kernel is likely adequate. -- 1.9.1

3 2

[U-Boot] [PATCH 1/3] arm: baltos: enable CMD_NET and FIT support in defconfig
by Yegor Yefremov 10 Jul '15

10 Jul '15

Signed-off-by: Yegor Yefremov <yegorslists(a)googlemail.com> --- configs/am335x_baltos_defconfig | 4 ++-- include/configs/baltos.h | 2 -- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig index bf73919..8e8a897 100644 --- a/configs/am335x_baltos_defconfig +++ b/configs/am335x_baltos_defconfig @@ -3,9 +3,9 @@ CONFIG_TARGET_AM335X_BALTOS=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y CONFIG_SYS_EXTRA_OPTIONS="NAND" -CONFIG_CONS_INDEX=1 # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set diff --git a/include/configs/baltos.h b/include/configs/baltos.h index 68bfee5..632523e 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -39,8 +39,6 @@ #define CONFIG_CMD_PART /* FIT support */ -#define CONFIG_FIT -#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ #define CONFIG_OF_BOARD_SETUP /* UBI Support */ -- 2.1.0

3 7

[U-Boot] [PATCH][v2] Makefile:Add GCC flag -fno-delete-null-pointer-checks
by Prabhakar Kushwaha 10 Jul '15

10 Jul '15

-fdelete-null-pointer-checks flag controls global dataflow analyses and eliminate useless checks for null pointers; It assume that if a pointer is checked after it has already been dereferenced, it cannot be null. This flag is enabled by default. gcc v4.9 has more optimizations added to this option. Hence it is very aggressive with GCC v4.9 series. Add -fno-delete-null-pointer-checks to disable the optimization Signed-off-by: Rohit Dharmakan <rohitarulraj(a)freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar(a)freescale.com> --- Changes for v2: move to top level file Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/Makefile b/Makefile index 37cc4c3..0dc6c53 100644 --- a/Makefile +++ b/Makefile @@ -565,6 +565,7 @@ KBUILD_CFLAGS += -DBUILD_TAG='"$(BUILD_TAG)"' endif KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector) +KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks) KBUILD_CFLAGS += -g # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format> -- 1.9.1

2 1

[U-Boot] [PATCH] siemens,am33x: adjust mtd partition
by Samuel Egli 10 Jul '15

10 Jul '15

Use one mtd partition for rootfs and configuration by means of ubi volumes and get rid of configuration partition. We can use partition layout for both 256MB and 512MB flash. Signed-off-by: Samuel Egli <samuel.egli(a)siemens.com> Cc: Heiko Schocher <hs(a)denx.de> Cc: Roger Meier <r.meier(a)siemens.com> --- include/configs/siemens-am33x-common.h | 33 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 17 deletions(-) diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 120647f..eddb868 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -486,7 +486,7 @@ /* * Variant 2 partition layout - * chip-size = 256MiB + * chip-size = 256MiB or 512 MiB *| name | size | address area | *------------------------------------------------------- *| spl | 128.000 KiB | 0x 0..0x 1ffff | @@ -496,23 +496,23 @@ *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | - *| rootfs | 148.000 MiB | 0x 360000..0x 975ffff | - *| mtdoops | 512.000 KiB | 0x 9760000..0x 98Dffff | - *|configuration | 104.125 MiB | 0x 97E0000..0x fffffff | + *| mtdoops | 512.000 KiB | 0x 360000..0x 3dffff | + *| (256) rootfs | 252.125 MiB | 0x 3E0000..0x fffffff | + *| (512) rootfs | 508.125 MiB | 0x 3E0000..0x1fffffff | *------------------------------------------------------- */ #define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \ - "128k(spl)," \ - "128k(spl.backup1)," \ - "128k(spl.backup2)," \ - "128k(spl.backup3)," \ - "1920k(u-boot)," \ - "512k(u-boot.env0)," \ - "512k(u-boot.env1)," \ - "148m(rootfs)," \ - "512k(mtdoops)," \ - "-(configuration)" + "128k(spl)," \ + "128k(spl.backup1)," \ + "128k(spl.backup2)," \ + "128k(spl.backup3)," \ + "1920k(u-boot)," \ + "512k(u-boot.env0)," \ + "512k(u-boot.env1)," \ + "512k(mtdoops)," \ + "-(rootfs)" + #define DFU_ALT_INFO_NAND_V2 \ "spl part 0 1;" \ @@ -522,8 +522,7 @@ "u-boot part 0 5;" \ "u-boot.env0 part 0 6;" \ "u-boot.env1 part 0 7;" \ - "rootfs partubi 0 8;" \ - "configuration partubi 0 10" + "rootfs partubi 0 9" \ #define CONFIG_ENV_SETTINGS_NAND_V2 \ "nand_active_ubi_vol=rootfs_a\0" \ @@ -540,7 +539,7 @@ "setenv nand_active_ubi_vol ${rootfs_name}_b;" \ "fi;" \ "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ - "ubi.mtd=7,2048 ubi.mtd=9,2048;" \ + "ubi.mtd=8,2048;" \ "setenv bootargs ${bootargs} " \ "root=${nand_root} noinitrd ${mtdparts} " \ "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ -- 1.7.10.4

5 8

[U-Boot] [PATCH] stm32f4: fix gpio description in comment
by Antonio Borneo 10 Jul '15

10 Jul '15

On STM32F429 gpio PC6/PC7 can be allocated for USART6, as reported in the comment. But current code in drivers/serial/serial_stm32.c uses a different gpio mapping (PG14/PG9) for USART6. Fix the comment to match current code in the driver. Signed-off-by: Antonio Borneo <borneo.antonio(a)gmail.com> To: u-boot(a)lists.denx.de To: Kamil Lulko <rev13(a)wp.pl> Cc: Tom Rini <trini(a)konsulko.com> --- This patch should be applied _after_ the patch stm32f4: fix minor typo in comment just sent to the list as: http://lists.denx.de/pipermail/u-boot/2015-July/217854.html include/configs/stm32f429-discovery.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h index ec5302f..de4850c 100644 --- a/include/configs/stm32f429-discovery.h +++ b/include/configs/stm32f429-discovery.h @@ -55,7 +55,7 @@ * 1: TX:PA9 RX:PA10 * 2: TX:PD5 RX:PD6 * 3: TX:PC10 RX:PC11 - * 6: TX:PC6 RX:PC7 + * 6: TX:PG14 RX:PG9 */ #define CONFIG_STM32_USART 1 -- 2.4.4

2 1

[U-Boot] [PATCH 1/2] stm32f4: fix MAINTAINERS file
by Antonio Borneo 10 Jul '15

10 Jul '15

When "scripts/get_maintainer.pl" parses "board/.../MAINTAINERS", it uses the line containing board name as delimiter. Without this line, the script happily mixes the lines from current board MAINTAINERS file with lines from another file. Fix it by adding a reasonable board name. Tested by comparing output of: cat board/st/stm32f429-discovery/MAINTAINERS ./scripts/get_maintainer.pl -f board/st/stm32f429-discovery Signed-off-by: Antonio Borneo <borneo.antonio(a)gmail.com> To: u-boot(a)lists.denx.de To: Kamil Lulko <rev13(a)wp.pl> Cc: Tom Rini <trini(a)konsulko.com> --- board/st/stm32f429-discovery/MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/board/st/stm32f429-discovery/MAINTAINERS b/board/st/stm32f429-discovery/MAINTAINERS index 78b0d28..641f26a 100644 --- a/board/st/stm32f429-discovery/MAINTAINERS +++ b/board/st/stm32f429-discovery/MAINTAINERS @@ -1,3 +1,4 @@ +STM32F429-DISCOVERY BOARD M: Kamil Lulko <rev13(a)wp.pl> S: Maintained F: board/st/stm32f429-discovery/ -- 2.4.4

2 3

[U-Boot] [PATCH] ti: Add SPDX license identifier to omap.h
by Simon Glass 10 Jul '15

10 Jul '15

This also came from Linux - according to this thread it has a GPL v2 license like arch/arm/mach-omap2/mux.h: http://lists.denx.de/pipermail/u-boot/2015-June/217827.html Signed-off-by: Simon Glass <sjg(a)chromium.org> Reported-by: Ingrid Viitanen <ingrid.viitanen(a)nokia.com> --- include/dt-bindings/pinctrl/omap.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h index edbd250..1dd7636 100644 --- a/include/dt-bindings/pinctrl/omap.h +++ b/include/dt-bindings/pinctrl/omap.h @@ -3,6 +3,8 @@ * * Copyright (C) 2009 Nokia * Copyright (C) 2009-2010 Texas Instruments + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef _DT_BINDINGS_PINCTRL_OMAP_H -- 2.4.3.573.g4eafbef

2 2