From: haikun <haikun.wang(a)freescale.com>
Bring in required device tree files for ls1021a from Linux.
These are initially unchanged and have a number of pieces not needed by U-Boot.
Signed-off-by: Haikun Wang <Haikun.Wang(a)freescale.com>
---
arch/arm/dts/Makefile | 3 +
arch/arm/dts/ls1021a-qds.dts | 201 +++++++++++++++++++++++
arch/arm/dts/ls1021a-twr.dts | 88 ++++++++++
arch/arm/dts/ls1021a.dtsi | 370 +++++++++++++++++++++++++++++++++++++++++++
4 files changed, 662 insertions(+)
create mode 100644 arch/arm/dts/ls1021a-qds.dts
create mode 100644 arch/arm/dts/ls1021a-twr.dts
create mode 100644 arch/arm/dts/ls1021a.dtsi
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index cbe5b86..67b821a 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -54,6 +54,9 @@ dtb-$(CONFIG_SOCFPGA) += \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_socrates.dtb
+dtb-$(CONFIG_TARGET_LS1021AQDS) += ls1021a-qds.dtb
+dtb-$(CONFIG_TARGET_LS1021ATWR) += ls1021a-twr.dtb
+
targets += $(dtb-y)
DTC_FLAGS += -R 4 -p 0x1000
diff --git a/arch/arm/dts/ls1021a-qds.dts b/arch/arm/dts/ls1021a-qds.dts
new file mode 100644
index 0000000..c89f85e
--- /dev/null
+++ b/arch/arm/dts/ls1021a-qds.dts
@@ -0,0 +1,201 @@
+/*
+ * Freescale ls1021a QDS board device tree source
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+ model = "LS1021A QDS Board";
+
+ aliases {
+ enet0_rgmii_phy = &rgmii_phy1;
+ enet1_rgmii_phy = &rgmii_phy2;
+ enet2_rgmii_phy = &rgmii_phy3;
+ enet0_sgmii_phy = &sgmii_phy1c;
+ enet1_sgmii_phy = &sgmii_phy1d;
+ };
+};
+
+&dspi0 {
+ bus-num = <0>;
+ status = "okay";
+
+ dspiflash: at45db021d@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <16000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <0>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ pca9547: mux@77 {
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ ds3232: rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+
+ ina220@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ ina220@41 {
+ compatible = "ti,ina220";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ eeprom@56 {
+ compatible = "atmel,24c512";
+ reg = <0x56>;
+ };
+
+ eeprom@57 {
+ compatible = "atmel,24c512";
+ reg = <0x57>;
+ };
+
+ adt7461a@4c {
+ compatible = "adi,adt7461a";
+ reg = <0x4c>;
+ };
+ };
+ };
+};
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ /* NOR, NAND Flashes and FPGA on board */
+ ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+ 0x2 0x0 0x0 0x7e800000 0x00010000
+ 0x3 0x0 0x0 0x7fb00000 0x00000100>;
+ status = "okay";
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ fpga: board-control@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ reg = <0x3 0x0 0x0000100>;
+ bank-width = <1>;
+ device-width = <1>;
+ ranges = <0 3 0 0x100>;
+
+ mdio-mux-emi1 {
+ compatible = "mdio-mux-mmioreg";
+ mdio-parent-bus = <&mdio0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x54 1>; /* BRDCFG4 */
+ mux-mask = <0xe0>; /* EMI1[2:0] */
+
+ /* Onboard PHYs */
+ ls1021amdio0: mdio@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rgmii_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ };
+
+ ls1021amdio1: mdio@20 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rgmii_phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ };
+
+ ls1021amdio2: mdio@40 {
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rgmii_phy3: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+ };
+
+ ls1021amdio3: mdio@60 {
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sgmii_phy1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+
+ ls1021amdio4: mdio@80 {
+ reg = <0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sgmii_phy1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+ };
+ };
+ };
+};
+
+&lpuart0 {
+ status = "okay";
+};
+
+&mdio0 {
+ tbi0: tbi-phy@8 {
+ reg = <0x8>;
+ device_type = "tbi-phy";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/ls1021a-twr.dts b/arch/arm/dts/ls1021a-twr.dts
new file mode 100644
index 0000000..34ac82d
--- /dev/null
+++ b/arch/arm/dts/ls1021a-twr.dts
@@ -0,0 +1,88 @@
+/*
+ * Freescale ls1021a TWR board device tree source
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+ model = "LS1021A TWR Board";
+
+ aliases {
+ enet2_rgmii_phy = &rgmii_phy1;
+ enet0_sgmii_phy = &sgmii_phy2;
+ enet1_sgmii_phy = &sgmii_phy0;
+ };
+};
+
+&dspi1 {
+ bus-num = <0>;
+ status = "okay";
+
+ dspiflash: s25fl064k@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl064k";
+ spi-max-frequency = <16000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <0>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ /* NOR Flash on board */
+ ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
+ status = "okay";
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+};
+
+&lpuart0 {
+ status = "okay";
+};
+
+&mdio0 {
+ sgmii_phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ rgmii_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ sgmii_phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ tbi1: tbi-phy@1f {
+ reg = <0x1f>;
+ device_type = "tbi-phy";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/ls1021a.dtsi b/arch/arm/dts/ls1021a.dtsi
new file mode 100644
index 0000000..434b938
--- /dev/null
+++ b/arch/arm/dts/ls1021a.dtsi
@@ -0,0 +1,370 @@
+/*
+ * Freescale ls1021a SOC common device tree source
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include "skeleton64.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "fsl,ls1021a";
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial0 = &lpuart0;
+ serial1 = &lpuart1;
+ serial2 = &lpuart2;
+ serial3 = &lpuart3;
+ serial4 = &lpuart4;
+ serial5 = &lpuart5;
+ sysclk = &sysclk;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@f00 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0xf00>;
+ clocks = <&cluster1_clk>;
+ };
+
+ cpu@f01 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0xf01>;
+ clocks = <&cluster1_clk>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ device_type = "soc";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ gic: interrupt-controller@1400000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x1401000 0x0 0x1000>,
+ <0x0 0x1402000 0x0 0x1000>,
+ <0x0 0x1404000 0x0 0x2000>,
+ <0x0 0x1406000 0x0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+
+ };
+
+ ifc: ifc@1530000 {
+ compatible = "fsl,ifc", "simple-bus";
+ reg = <0x0 0x1530000 0x0 0x10000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ dcfg: dcfg@1ee0000 {
+ compatible = "fsl,ls1021a-dcfg", "syscon";
+ reg = <0x0 0x1ee0000 0x0 0x10000>;
+ big-endian;
+ };
+
+ esdhc: esdhc@1560000 {
+ compatible = "fsl,esdhc";
+ reg = <0x0 0x1560000 0x0 0x10000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <0>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ big-endian;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ scfg: scfg@1570000 {
+ compatible = "fsl,ls1021a-scfg", "syscon";
+ reg = <0x0 0x1570000 0x0 0x10000>;
+ big-endian;
+ };
+
+ clockgen: clocking@1ee1000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1ee1000 0x10000>;
+
+ sysclk: sysclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "sysclk";
+ };
+
+ cga_pll1: pll@800 {
+ compatible = "fsl,qoriq-core-pll-2.0";
+ #clock-cells = <1>;
+ reg = <0x800 0x10>;
+ clocks = <&sysclk>;
+ clock-output-names = "cga-pll1", "cga-pll1-div2",
+ "cga-pll1-div4";
+ };
+
+ platform_clk: pll@c00 {
+ compatible = "fsl,qoriq-core-pll-2.0";
+ #clock-cells = <1>;
+ reg = <0xc00 0x10>;
+ clocks = <&sysclk>;
+ clock-output-names = "platform-clk", "platform-clk-div2";
+ };
+
+ cluster1_clk: clk0c0@0 {
+ compatible = "fsl,qoriq-core-mux-2.0";
+ #clock-cells = <0>;
+ reg = <0x0 0x10>;
+ clock-names = "pll1cga", "pll1cga-div2", "pll1cga-div4";
+ clocks = <&cga_pll1 0>, <&cga_pll1 1>, <&cga_pll1 2>;
+ clock-output-names = "cluster1-clk";
+ };
+ };
+
+ dspi0: dspi@2100000 {
+ compatible = "fsl,vf610-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2100000 0x0 0x10000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "dspi";
+ clocks = <&platform_clk 1>;
+ spi-num-chipselects = <5>;
+ big-endian;
+ status = "disabled";
+ };
+
+ dspi1: dspi@2110000 {
+ compatible = "fsl,vf610-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2110000 0x0 0x10000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "dspi";
+ clocks = <&platform_clk 1>;
+ spi-num-chipselects = <5>;
+ big-endian;
+ status = "disabled";
+ };
+
+ i2c0: i2c@2180000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2180000 0x0 0x10000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "i2c";
+ clocks = <&platform_clk 1>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@2190000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2190000 0x0 0x10000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "i2c";
+ clocks = <&platform_clk 1>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@21a0000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x21a0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "i2c";
+ clocks = <&platform_clk 1>;
+ status = "disabled";
+ };
+
+ uart0: serial@21c0500 {
+ compatible = "fsl,16550-FIFO64", "ns16550a";
+ reg = <0x0 0x21c0500 0x0 0x100>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <0>;
+ fifo-size = <15>;
+ status = "disabled";
+ };
+
+ uart1: serial@21c0600 {
+ compatible = "fsl,16550-FIFO64", "ns16550a";
+ reg = <0x0 0x21c0600 0x0 0x100>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <0>;
+ fifo-size = <15>;
+ status = "disabled";
+ };
+
+ uart2: serial@21d0500 {
+ compatible = "fsl,16550-FIFO64", "ns16550a";
+ reg = <0x0 0x21d0500 0x0 0x100>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <0>;
+ fifo-size = <15>;
+ status = "disabled";
+ };
+
+ uart3: serial@21d0600 {
+ compatible = "fsl,16550-FIFO64", "ns16550a";
+ reg = <0x0 0x21d0600 0x0 0x100>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <0>;
+ fifo-size = <15>;
+ status = "disabled";
+ };
+
+ lpuart0: serial@2950000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2950000 0x0 0x1000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sysclk>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart1: serial@2960000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2960000 0x0 0x1000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart2: serial@2970000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2970000 0x0 0x1000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart3: serial@2980000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2980000 0x0 0x1000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart4: serial@2990000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2990000 0x0 0x1000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart5: serial@29a0000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x29a0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ wdog0: watchdog@2ad0000 {
+ compatible = "fsl,imx21-wdt";
+ reg = <0x0 0x2ad0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 1>;
+ clock-names = "wdog-en";
+ big-endian;
+ };
+
+ sai1: sai@2b50000 {
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0x2b50000 0x0 0x10000>;
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 1>;
+ clock-names = "sai";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 47>,
+ <&edma0 1 46>;
+ big-endian;
+ status = "disabled";
+ };
+
+ sai2: sai@2b60000 {
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0x2b60000 0x0 0x10000>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 1>;
+ clock-names = "sai";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 45>,
+ <&edma0 1 44>;
+ big-endian;
+ status = "disabled";
+ };
+
+ edma0: edma@2c00000 {
+ #dma-cells = <2>;
+ compatible = "fsl,vf610-edma";
+ reg = <0x0 0x2c00000 0x0 0x10000>,
+ <0x0 0x2c10000 0x0 0x10000>,
+ <0x0 0x2c20000 0x0 0x10000>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
+ dma-channels = <32>;
+ big-endian;
+ clock-names = "dmamux0", "dmamux1";
+ clocks = <&platform_clk 1>,
+ <&platform_clk 1>;
+ };
+
+ mdio0: mdio@2d24000 {
+ compatible = "gianfar";
+ device_type = "mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2d24000 0x0 0x4000>;
+ };
+
+ usb@8600000 {
+ compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+ reg = <0x0 0x8600000 0x0 0x1000>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ phy_type = "ulpi";
+ };
+
+ usb3@3100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ };
+ };
+};
--
2.1.0.27.g96db324
