March 2015 - U-Boot

[U-Boot] [PATCH] sunxi: Machine id hack to prevent loading buggy sunxi-3.4 kernels
by Siarhei Siamashka 25 Sep '15

25 Sep '15

Store the 'compatibility revision' number in the top 4 bits of the machine id and pass it to the kernel. The old buggy kernels will fail to load with a very much googlable error message on the serial console: "Error: unrecognized/unsupported machine ID (r1 = 0x100010bb)" This error message can be documented in the linux-sunxi wiki with proper explanations about how to resolve this situation and where to get the necessary bugfixes for the sunxi-3.4 kernel. The fixed sunxi-3.4 kernels can implement a revision compatibility check and clear the top 4 bits of the machine id if everything is alright. Signed-off-by: Siarhei Siamashka <siarhei.siamashka(a)gmail.com> --- To be used together with: https://groups.google.com/forum/#!topic/linux-sunxi/LOAxP3kAYs8 include/configs/sun4i.h | 4 ++-- include/configs/sun5i.h | 4 ++-- include/configs/sun7i.h | 4 ++-- include/configs/sunxi-common.h | 7 +++++++ 4 files changed, 13 insertions(+), 6 deletions(-) diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h index 87d269b..1537e53 100644 --- a/include/configs/sun4i.h +++ b/include/configs/sun4i.h @@ -13,8 +13,6 @@ */ #define CONFIG_CLK_FULL_SPEED 1008000000 -#define CONFIG_MACH_TYPE 4104 - #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 @@ -25,4 +23,6 @@ */ #include <configs/sunxi-common.h> +#define CONFIG_MACH_TYPE (4104 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28)) + #endif /* __CONFIG_H */ diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h index 52e3a6f..e755531 100644 --- a/include/configs/sun5i.h +++ b/include/configs/sun5i.h @@ -13,8 +13,6 @@ */ #define CONFIG_CLK_FULL_SPEED 1008000000 -#define CONFIG_MACH_TYPE 4138 - #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 @@ -25,4 +23,6 @@ */ #include <configs/sunxi-common.h> +#define CONFIG_MACH_TYPE (4138 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28)) + #endif /* __CONFIG_H */ diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h index 7cd7890..f817f73 100644 --- a/include/configs/sun7i.h +++ b/include/configs/sun7i.h @@ -14,8 +14,6 @@ */ #define CONFIG_CLK_FULL_SPEED 912000000 -#define CONFIG_MACH_TYPE 4283 - #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 @@ -31,4 +29,6 @@ */ #include <configs/sunxi-common.h> +#define CONFIG_MACH_TYPE (4283 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28)) + #endif /* __CONFIG_H */ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 5ece020..f3e764a 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -14,6 +14,13 @@ #define _SUNXI_COMMON_CONFIG_H /* + * Compatibility guard to prevent loading old buggy sunxi-3.4 kernels. + * Only sunxi-3.4 kernels with appropriate fixes applied are able to + * pass beyond the machine id check. + */ +#define CONFIG_MACH_TYPE_COMPAT_REV 1 + +/* * High Level Configuration Options */ #define CONFIG_SUNXI /* sunxi family */ -- 2.0.5

4 16

[U-Boot] Regression in usb-storage in u-boot 2015.04 ???
by Hans de Goede 23 Sep '15

23 Sep '15

Hi, First of all I'm not sure this is a regression, but I'm afraid I do not have time to dig deeper so I thought I should report it anyways and then others can try to reproduce it. I'm seeing the following happen when using a usb stick with a musb-new otg controller in host mode on an allwinner tablet: sunxi# usb reset resetting USB... USB0: scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... error in inquiry 0 Storage Device(s) found The interesting thing is that, the first "usb start" works fine, this only happens on the second usb start (triggered through a usb reset). This may be specific to using musb on sunxi, or to the flashdrive I have but I thought I should report this anyways. Esp. since usb otherwise works fine after a usb reset, other devices (usb keyboards) continue to work, and the descriptors of the usb drive do get read correctly: sunxi# usb info 1: Mass Storage, USB Revision 2.0 - USB Flash Disk 4C0E960F - Class: (from Interface) Mass Storage - PacketSize: 64 Configurations: 1 - Vendor: 0x058f Product 0x6387 Version 1.3 Configuration: 1 - Interfaces: 1 Bus Powered 100mA Interface: 0 - Alternate Setting 0, Endpoints: 2 - Class Mass Storage, Transp. SCSI, Bulk only - Endpoint 1 Out Bulk MaxPacket 512 - Endpoint 2 In Bulk MaxPacket 512 Perhaps someone can test the reproducer on another board with usb: 1) plug in a usb drive 2) do "usb start" 3) should print that 1 storage device is found 4) do "usb reset" 5) should still print that 1 storage device is found, but for me gives the error I mentioned above. Regards, Hans

5 11

[U-Boot] [PATCH 1/4] dfu: defer parsing of device string to IO backend
by Stephen Warren 22 Sep '15

22 Sep '15

From: Stephen Warren <swarren(a)nvidia.com> Devices are not all identified by a single integer. To support this, defer the parsing of the device string to the IO backed, so that it can apply the appropriate rules. SPI devices are specified as controller:chip_select. SPI/SF support will be added soon. MMC devices can also be specified as controller[.hwpart][:partition] in many commands, although we don't support that syntax in DFU. Signed-off-by: Stephen Warren <swarren(a)nvidia.com> --- common/cmd_dfu.c | 3 +-- drivers/dfu/dfu.c | 20 ++++++++++---------- drivers/dfu/dfu_mmc.c | 21 ++++++++++++--------- drivers/dfu/dfu_nand.c | 2 +- drivers/dfu/dfu_ram.c | 2 +- include/dfu.h | 22 +++++++++++++--------- 6 files changed, 38 insertions(+), 32 deletions(-) diff --git a/common/cmd_dfu.c b/common/cmd_dfu.c index 433bddd5d2bd..2633b30e556f 100644 --- a/common/cmd_dfu.c +++ b/common/cmd_dfu.c @@ -24,8 +24,7 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int ret, i = 0; - ret = dfu_init_env_entities(interface, simple_strtoul(devstring, - NULL, 10)); + ret = dfu_init_env_entities(interface, devstring); if (ret) goto done; diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c index 1bf66d0613c9..26d3b44e40f5 100644 --- a/drivers/dfu/dfu.c +++ b/drivers/dfu/dfu.c @@ -44,7 +44,7 @@ static int dfu_find_alt_num(const char *s) return ++i; } -int dfu_init_env_entities(char *interface, int dev) +int dfu_init_env_entities(char *interface, char *devstr) { const char *str_env; char *env_bkp; @@ -57,7 +57,7 @@ int dfu_init_env_entities(char *interface, int dev) } env_bkp = strdup(str_env); - ret = dfu_config_entities(env_bkp, interface, dev); + ret = dfu_config_entities(env_bkp, interface, devstr); if (ret) { error("DFU entities configuration failed!\n"); return ret; @@ -389,26 +389,25 @@ int dfu_read(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num) } static int dfu_fill_entity(struct dfu_entity *dfu, char *s, int alt, - char *interface, int num) + char *interface, char *devstr) { char *st; - debug("%s: %s interface: %s num: %d\n", __func__, s, interface, num); + debug("%s: %s interface: %s dev: %s\n", __func__, s, interface, devstr); st = strsep(&s, " "); strcpy(dfu->name, st); - dfu->dev_num = num; dfu->alt = alt; /* Specific for mmc device */ if (strcmp(interface, "mmc") == 0) { - if (dfu_fill_entity_mmc(dfu, s)) + if (dfu_fill_entity_mmc(dfu, devstr, s)) return -1; } else if (strcmp(interface, "nand") == 0) { - if (dfu_fill_entity_nand(dfu, s)) + if (dfu_fill_entity_nand(dfu, devstr, s)) return -1; } else if (strcmp(interface, "ram") == 0) { - if (dfu_fill_entity_ram(dfu, s)) + if (dfu_fill_entity_ram(dfu, devstr, s)) return -1; } else { printf("%s: Device %s not (yet) supported!\n", @@ -434,7 +433,7 @@ void dfu_free_entities(void) alt_num_cnt = 0; } -int dfu_config_entities(char *env, char *interface, int num) +int dfu_config_entities(char *env, char *interface, char *devstr) { struct dfu_entity *dfu; int i, ret; @@ -457,7 +456,8 @@ int dfu_config_entities(char *env, char *interface, int num) for (i = 0; i < dfu_alt_num; i++) { s = strsep(&env, ";"); - ret = dfu_fill_entity(&dfu[i], s, alt_num_cnt, interface, num); + ret = dfu_fill_entity(&dfu[i], s, alt_num_cnt, interface, + devstr); if (ret) return -1; diff --git a/drivers/dfu/dfu_mmc.c b/drivers/dfu/dfu_mmc.c index 322bd8c5d2de..72fa03eedaec 100644 --- a/drivers/dfu/dfu_mmc.c +++ b/drivers/dfu/dfu_mmc.c @@ -27,7 +27,7 @@ static int mmc_access_part(struct dfu_entity *dfu, struct mmc *mmc, int part) if (part == mmc->part_num) return 0; - ret = mmc_switch_part(dfu->dev_num, part); + ret = mmc_switch_part(dfu->data.mmc.dev_num, part); if (ret) { error("Cannot switch to partition %d\n", part); return ret; @@ -40,7 +40,7 @@ static int mmc_access_part(struct dfu_entity *dfu, struct mmc *mmc, int part) static int mmc_block_op(enum dfu_op op, struct dfu_entity *dfu, u64 offset, void *buf, long *len) { - struct mmc *mmc = find_mmc_device(dfu->dev_num); + struct mmc *mmc = find_mmc_device(dfu->data.mmc.dev_num); u32 blk_start, blk_count, n = 0; int ret, part_num_bkp = 0; @@ -67,15 +67,15 @@ static int mmc_block_op(enum dfu_op op, struct dfu_entity *dfu, } debug("%s: %s dev: %d start: %d cnt: %d buf: 0x%p\n", __func__, - op == DFU_OP_READ ? "MMC READ" : "MMC WRITE", dfu->dev_num, - blk_start, blk_count, buf); + op == DFU_OP_READ ? "MMC READ" : "MMC WRITE", + dfu->data.mmc.dev_num, blk_start, blk_count, buf); switch (op) { case DFU_OP_READ: - n = mmc->block_dev.block_read(dfu->dev_num, blk_start, + n = mmc->block_dev.block_read(dfu->data.mmc.dev_num, blk_start, blk_count, buf); break; case DFU_OP_WRITE: - n = mmc->block_dev.block_write(dfu->dev_num, blk_start, + n = mmc->block_dev.block_write(dfu->data.mmc.dev_num, blk_start, blk_count, buf); break; default: @@ -270,7 +270,7 @@ int dfu_read_medium_mmc(struct dfu_entity *dfu, u64 offset, void *buf, * 4th (optional): * mmcpart <num> (access to HW eMMC partitions) */ -int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s) +int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr, char *s) { const char *entity_type; size_t second_arg; @@ -281,6 +281,8 @@ int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s) const char *argv[3]; const char **parg = argv; + dfu->data.mmc.dev_num = simple_strtoul(devstr, NULL, 10); + for (; parg < argv + sizeof(argv) / sizeof(*argv); ++parg) { *parg = strsep(&s, " "); if (*parg == NULL) { @@ -297,9 +299,10 @@ int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s) second_arg = simple_strtoul(argv[1], NULL, 0); third_arg = simple_strtoul(argv[2], NULL, 0); - mmc = find_mmc_device(dfu->dev_num); + mmc = find_mmc_device(dfu->data.mmc.dev_num); if (mmc == NULL) { - error("Couldn't find MMC device no. %d.\n", dfu->dev_num); + error("Couldn't find MMC device no. %d.\n", + dfu->data.mmc.dev_num); return -ENODEV; } diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c index e1c9a8849246..f9ee18999ab7 100644 --- a/drivers/dfu/dfu_nand.c +++ b/drivers/dfu/dfu_nand.c @@ -179,7 +179,7 @@ unsigned int dfu_polltimeout_nand(struct dfu_entity *dfu) return DFU_DEFAULT_POLL_TIMEOUT; } -int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) +int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr, char *s) { char *st; int ret, dev, part; diff --git a/drivers/dfu/dfu_ram.c b/drivers/dfu/dfu_ram.c index b6c6e60c443c..e094a946f6be 100644 --- a/drivers/dfu/dfu_ram.c +++ b/drivers/dfu/dfu_ram.c @@ -52,7 +52,7 @@ static int dfu_read_medium_ram(struct dfu_entity *dfu, u64 offset, return dfu_transfer_medium_ram(DFU_OP_READ, dfu, offset, buf, len); } -int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s) +int dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr, char *s) { char *st; diff --git a/include/dfu.h b/include/dfu.h index df720310f2cc..21390aa9b7b3 100644 --- a/include/dfu.h +++ b/include/dfu.h @@ -39,6 +39,8 @@ enum dfu_op { }; struct mmc_internal_data { + int dev_num; + /* RAW programming */ unsigned int lba_start; unsigned int lba_size; @@ -87,7 +89,6 @@ struct dfu_entity { char name[DFU_NAME_SIZE]; int alt; void *dev_private; - int dev_num; enum dfu_device_type dev_type; enum dfu_layout layout; @@ -125,7 +126,7 @@ struct dfu_entity { unsigned int inited:1; }; -int dfu_config_entities(char *s, char *interface, int num); +int dfu_config_entities(char *s, char *interface, char *devstr); void dfu_free_entities(void); void dfu_show_entities(void); int dfu_get_alt_number(void); @@ -136,7 +137,7 @@ char *dfu_extract_token(char** e, int *n); void dfu_trigger_reset(void); int dfu_get_alt(char *name); bool dfu_reset(void); -int dfu_init_env_entities(char *interface, int dev); +int dfu_init_env_entities(char *interface, char *devstr); unsigned char *dfu_get_buf(void); unsigned char *dfu_free_buf(void); unsigned long dfu_get_buf_size(void); @@ -146,9 +147,10 @@ int dfu_write(struct dfu_entity *de, void *buf, int size, int blk_seq_num); int dfu_flush(struct dfu_entity *de, void *buf, int size, int blk_seq_num); /* Device specific */ #ifdef CONFIG_DFU_MMC -extern int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s); +extern int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr, char *s); #else -static inline int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s) +static inline int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr, + char *s) { puts("MMC support not available!\n"); return -1; @@ -156,9 +158,10 @@ static inline int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s) #endif #ifdef CONFIG_DFU_NAND -extern int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s); +extern int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr, char *s); #else -static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) +static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr, + char *s) { puts("NAND support not available!\n"); return -1; @@ -166,9 +169,10 @@ static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) #endif #ifdef CONFIG_DFU_RAM -extern int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s); +extern int dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr, char *s); #else -static inline int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s) +static inline int dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr, + char *s) { puts("RAM support not available!\n"); return -1; -- 1.8.1.5

3 15

[U-Boot] Can't start Linux if U-Boot built with CONFIG_WATCHDOG
by Matthew Lear 26 Aug '15

26 Aug '15

Hello all, I've added watchdog support based on U-Boot (git) for the m68k coldfire mcf54455evb platform. I've fed the patch to the maintainer to help in development. However, I am unable to start my m68k w/MMU coldfire Linux kernel from U-Boot if U-Boot is built with CONFIG_WATCHDOG regardless if the watchdog_enable(), watchdog_reset() and watchdog_disable() functions touch hardware or not. I initially thought this was a problem with enabling the watchdog somehow (ie when Linux started, some hw configuration in the device was getting upset or corrupted etc resulting in the failure), but when I commented out the code from the above functions that actually accesses the hw (ie to enable, kick and disable the watchdog timer hw block), Linux is still unable to start. In fact, I don't think Linux actually gets started! That's the problem. If I rebuild the same U-Boot code base with CONFIG_WATCHDOG undefined, Linux can start just fine. As far as I can tell, there are no functional differences in building U-Boot with or without CONFIG_WATCHDOG enabled when the functions above are stubs and do absolutely nothing at all. If I build U-Boot with debug, what I see is as follows: ## Transferring control to Linux (at address 40020000) ... BIV ...and then the board is dead. I occasionally see something like the following from U-Boot: *** Unexpected exception *** Vector Number: 4 Format: 04 Fault Status: 0 PC: 4fdbfdc8 SR: 00002700 SP: 4fd72a64 D0: 00000004 D1: 000003f9 D2: 4fdb4202 D3: 004fa3da D4: 00000000 D5: 4fdc7c8c D6: 122c0034 D7: 4fd82f76 A0: 4033cb98 A1: 4025aa39 A2: 40020000 A3: 4fdbfdc8 A4: 00000000 A5: 4fdc5800 A6: 4fd72afb *** Please Reset Board! *** The 'BIV' is relevant because in my 2.6.29 kernel src arch/m68k/include/asm/bootinfo_mm.h, BOOTINFOV_MAGIC is defined to be 0x4249561A which is BIV^Z. This ascii text is located in the kernel image header info: >From arch/m68k/coldfire/head.S: .section ".text.head","ax" ENTRY(_stext) bras 1f /* Jump over bootinfo version numbers */ .long BOOTINFOV_MAGIC .long 0 And from U-Boot itself: -> md ${loadaddr} 40010000: 27051956 97342d7d 4a54afd5 00300000 '..V.4-}JT...0.. 40010010: 40020000 40020000 8a006fc1 050c0200 @...@.....o..... 40010020: 4c696e75 78204b65 726e656c 20496d61 Linux Kernel Ima 40010030: 67650000 00000000 00000000 00000000 ge.............. 40010040: 60084249 561a0000 00004ef9 40304000 `.BIV.....N.@0@. I suspect that the failure of starting Linux is caused by some mismatch in data structures (or versions there of) shared/copied between Linux and U-Boot and that this data has somehow changed when U-Boot is built with CONFIG_WATCHDOG #defined. However, I can't find any evidence of this in the U-Boot code base. The bras instruction above must be key and I suspect that this is the area causing the problem. Can anybody offer any advice / explanation of what exactly could be going on and why? I wouldn't have expected that defining CONFIG_WATCHDOG would change anything as fundamental as this. Apologies for the cross-post (U-Boot and m68k kernel dev) but I hope to get opinions/feedback/help from both communities. Any assistance very much appreciated indeed. Many thanks, -- Matt

2 1

[U-Boot] [PATCH] ARM: cpu: Add ARMv7 barrier operations support
by Vladimir Barinov 20 Aug '15

20 Aug '15

From: Valentine Barshak <valentine.barshak(a)cogentembedded.com> This enables ARMv7 barrier operations support when march=armv7-a is enabled. Using CP15 barriers causes U-Boot bootm command crash when transferring control to the loaded image on Renesas R8A7794 Cortex A7 CPU. Using ARMv7 barrier operations instead of the deprecated CP15 barriers helps to avoid these issues. Signed-off-by: Valentine Barshak <valentine.barshak+renesas(a)cogentembedded.com> Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas(a)cogentembedded.com> Reviewed-by: Tom Rini <trini(a)konsulko.com> --- arch/arm/cpu/armv7/cache_v7.c | 14 +++++++------- arch/arm/include/asm/armv7.h | 10 ++++++++++ 2 files changed, 17 insertions(+), 7 deletions(-) diff --git a/arch/arm/cpu/armv7/cache_v7.c b/arch/arm/cpu/armv7/cache_v7.c index 0f9d837..e8ee875 100644 --- a/arch/arm/cpu/armv7/cache_v7.c +++ b/arch/arm/cpu/armv7/cache_v7.c @@ -68,7 +68,7 @@ static void v7_inval_dcache_level_setway(u32 level, u32 num_sets, } } /* DSB to make sure the operation is complete */ - CP15DSB; + DSB; } static void v7_clean_inval_dcache_level_setway(u32 level, u32 num_sets, @@ -96,7 +96,7 @@ static void v7_clean_inval_dcache_level_setway(u32 level, u32 num_sets, } } /* DSB to make sure the operation is complete */ - CP15DSB; + DSB; } static void v7_maint_dcache_level_setway(u32 level, u32 operation) @@ -215,7 +215,7 @@ static void v7_dcache_maint_range(u32 start, u32 stop, u32 range_op) } /* DSB to make sure the operation is complete */ - CP15DSB; + DSB; } /* Invalidate TLB */ @@ -228,9 +228,9 @@ static void v7_inval_tlb(void) /* Invalidate entire instruction TLB */ asm volatile ("mcr p15, 0, %0, c8, c5, 0" : : "r" (0)); /* Full system DSB - make sure that the invalidation is complete */ - CP15DSB; + DSB; /* Full system ISB - make sure the instruction stream sees it */ - CP15ISB; + ISB; } void invalidate_dcache_all(void) @@ -343,10 +343,10 @@ void invalidate_icache_all(void) asm volatile ("mcr p15, 0, %0, c7, c5, 6" : : "r" (0)); /* Full system DSB - make sure that the invalidation is complete */ - CP15DSB; + DSB; /* ISB - make sure the instruction stream sees it */ - CP15ISB; + ISB; } #else void invalidate_icache_all(void) diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h index a13da23..189f3f0 100644 --- a/arch/arm/include/asm/armv7.h +++ b/arch/arm/include/asm/armv7.h @@ -70,6 +70,16 @@ #define CP15DSB asm volatile ("mcr p15, 0, %0, c7, c10, 4" : : "r" (0)) #define CP15DMB asm volatile ("mcr p15, 0, %0, c7, c10, 5" : : "r" (0)) +#ifdef __ARM_ARCH_7A__ +#define ISB asm volatile ("isb" : : : "memory") +#define DSB asm volatile ("dsb" : : : "memory") +#define DMB asm volatile ("dmb" : : : "memory") +#else +#define ISB CP15ISB +#define DSB CP15DSB +#define DMB CP15DMB +#endif + /* * Workaround for ARM errata # 798870 * Set L2ACTLR[7] to reissue any memory transaction in the L2 that has been -- 1.9.3

3 3

[U-Boot] [PATCHv3 00/17] Add SPL support for SoCFPGA
by dinguyen＠opensource.altera.com 13 Aug '15

13 Aug '15

From: Dinh Nguyen <dinguyen(a)opensource.altera.com> Hello, This is v3 of the patchset that adds all the SPL code that is necessary to support the SoCFPGA platform. For v3, here are the changes: - Remove gdata - Remove s_init - Remove socfpga lowlevel_init.S - Use common u-boot-spl.lds - Properly use CONFIG_SPL_TEXT_BASE so we don't have to add an .sram section I have pushed a branch to git://git.rocketboards.org/u-boot-socfpga-next.git socfpga_for_next_spl_v3 for testing and reviewing. Rebased to 2015.04-rc4. Thanks, Dinh Nguyen (17): arm: socfpga: spl: Add main sdram code arm: socfpga: spl: Add CONFIG_SPL_MAX_SIZE to be 64KB arm: socfpga: add functions to bring sdram, timer, and uart out of reset arm: socfpga: spl: enable sdram, timer and uart arm: socfpga: spl: Add call to timer_init arm: socfpga: spl: allow bootrom to enable IOs after warm reset arm: socfpga: spl: add sdram init and calibration arm: socfpga: spl: printout sdram size arm: socfpga: spl: Use common lowlevel_init arm: socfpga: spl: Add s_init stub arm: socfpga: spl: add CONFIG_SPL_STACK to socfpga_common.h arm: socfpga: spl: Adjust the SYS_INIT_RAM_SIZE to have room for the spl malloc arm: socfpga: spl: add board_init_f to SPL arm: socfpga: spl: Add SDRAM check arm: socfpga: spl: update pll_config for dev kit arm: socfpga: remove the need to map sdram in arch_early_init arm: socfpga: fix uart0 pin mux configuration Makefile | 1 + arch/arm/cpu/armv7/Makefile | 2 +- arch/arm/cpu/armv7/socfpga/Makefile | 1 - arch/arm/cpu/armv7/socfpga/lowlevel_init.S | 45 - arch/arm/cpu/armv7/socfpga/misc.c | 3 - arch/arm/cpu/armv7/socfpga/reset_manager.c | 24 + arch/arm/cpu/armv7/socfpga/spl.c | 62 + arch/arm/cpu/armv7/socfpga/system_manager.c | 9 + arch/arm/include/asm/arch-socfpga/reset_manager.h | 6 + arch/arm/include/asm/arch-socfpga/sdram.h | 434 +++ arch/arm/include/asm/arch-socfpga/sdram_config.h | 100 + arch/arm/include/asm/arch-socfpga/system_manager.h | 1 + board/altera/socfpga/pinmux_config.c | 4 +- board/altera/socfpga/pll_config.h | 4 +- board/altera/socfpga/socfpga.c | 2 + drivers/ddr/altera/Makefile | 12 + drivers/ddr/altera/sdram.c | 1307 +++++++ drivers/ddr/altera/sequencer.c | 3970 ++++++++++++++++++++ drivers/ddr/altera/sequencer.h | 359 ++ drivers/ddr/altera/sequencer_auto.h | 216 ++ drivers/ddr/altera/sequencer_auto_ac_init.c | 85 + drivers/ddr/altera/sequencer_auto_inst_init.c | 270 ++ drivers/ddr/altera/sequencer_defines.h | 121 + include/configs/socfpga_common.h | 8 +- include/configs/socfpga_cyclone5.h | 1 + scripts/Makefile.spl | 1 + 26 files changed, 6993 insertions(+), 55 deletions(-) delete mode 100644 arch/arm/cpu/armv7/socfpga/lowlevel_init.S create mode 100644 arch/arm/include/asm/arch-socfpga/sdram.h create mode 100644 arch/arm/include/asm/arch-socfpga/sdram_config.h create mode 100644 drivers/ddr/altera/Makefile create mode 100644 drivers/ddr/altera/sdram.c create mode 100644 drivers/ddr/altera/sequencer.c create mode 100644 drivers/ddr/altera/sequencer.h create mode 100644 drivers/ddr/altera/sequencer_auto.h create mode 100644 drivers/ddr/altera/sequencer_auto_ac_init.c create mode 100644 drivers/ddr/altera/sequencer_auto_inst_init.c create mode 100644 drivers/ddr/altera/sequencer_defines.h -- 2.2.1

10 84

[U-Boot] [PATCH 0/3] DM9000 support for multiple interfaces
by Andrew Ruder 11 Aug '15

11 Aug '15

This is a rework of the DM9000 driver to support registering interfaces dynamically (i.e. determine how many ethernet chips we have at boot and register 0, 1, 2, or more). It was tested on a yet-to-be-submitted board which is based on the PXA270 + 0, 1, or 2 DM9000 chips. To maintain backwards compatibility with older board files, we add a new initialize function taking the io address, data address, and availability of a SROM chip. The old initialize function is now a shim around this new initialize function but provides the parameters based on the old DM9000 preprocessor symbols. I have compile-tested this on all the arm-based boards. Cc: Joe Hershberger <joe.hershberger(a)gmail.com> Andrew Ruder (3): dm9000: mark dump_regs() function as unused dm9000: Add struct eth_device * to SROM functions dm9000: rework dm9000 to support multiple devices board/trizepsiv/eeprom.c | 5 +- drivers/net/dm9000x.c | 382 +++++++++++++++++++++++++++-------------------- include/dm9000.h | 8 +- include/netdev.h | 1 + 4 files changed, 224 insertions(+), 172 deletions(-) -- 2.1.1

5 14

[U-Boot] [PATCH v1 0/3] sparc: Add support for Gaisler GR712RC-BOARD Development Kit
by Francois Retief 11 Aug '15

11 Aug '15

This patch series add support for the Aeroflex Gaisler GR712RC-BOARD Development Kit. It builds on top of the previous SPARC architecture update series. Francois Retief (3): sparc: Make LEON serial drivers use readl/writel macros sparc: Add MDIO support to GRETH driver sparc: Add support for gr712rc-board arch/sparc/Kconfig | 8 + arch/sparc/cpu/leon2/serial.c | 121 +++++----- arch/sparc/cpu/leon3/serial.c | 93 ++++---- arch/sparc/include/asm/io.h | 43 ++-- board/gaisler/gr712rc_board/Kconfig | 9 + board/gaisler/gr712rc_board/MAINTAINERS | 6 + board/gaisler/gr712rc_board/Makefile | 8 + board/gaisler/gr712rc_board/README | 24 ++ board/gaisler/gr712rc_board/gr712rc_board.c | 68 ++++++ common/cmd_bdinfo.c | 4 + configs/gr712rc_board_defconfig | 3 + drivers/net/greth.c | 57 +++++ include/configs/gr712rc_board.h | 333 ++++++++++++++++++++++++++++ include/configs/gr_cpci_ax2000.h | 4 - include/configs/gr_ep2s60.h | 4 - include/configs/gr_xc3s_1500.h | 4 - include/configs/grsim.h | 3 - 17 files changed, 650 insertions(+), 142 deletions(-) create mode 100644 board/gaisler/gr712rc_board/Kconfig create mode 100644 board/gaisler/gr712rc_board/MAINTAINERS create mode 100644 board/gaisler/gr712rc_board/Makefile create mode 100644 board/gaisler/gr712rc_board/README create mode 100644 board/gaisler/gr712rc_board/gr712rc_board.c create mode 100644 configs/gr712rc_board_defconfig create mode 100644 include/configs/gr712rc_board.h -- 1.9.3 ________________________________ Disclaimer and confidentiality note – refer to our website for further details: www.spaceteq.co.za <http://www.spaceteq.co.za/home/emaildisclaimer/>

3 5

[U-Boot] [PATCH] arm:ls1021a: Reserve secure code into RAM instead of OCRAM
by Zhuoyu Zhang 04 Aug '15

04 Aug '15

For ls1021a, Reserve secure code in to memory in case OCRAM is needed by other usage. Signed-off-by: Zhuoyu Zhang <Zhuoyu.Zhang(a)freescale.com> --- include/configs/ls1021aqds.h | 1 - include/configs/ls1021atwr.h | 1 - 2 files changed, 2 deletions(-) diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 3dc4da3..42439a4 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -554,7 +554,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_LS102XA_NS_ACCESS #define CONFIG_SMP_PEN_ADDR 0x01ee0200 #define CONFIG_TIMER_CLK_FREQ 12500000 -#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index a13876b..dccc661 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -347,7 +347,6 @@ #define CONFIG_LS102XA_NS_ACCESS #define CONFIG_SMP_PEN_ADDR 0x01ee0200 #define CONFIG_TIMER_CLK_FREQ 12500000 -#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 -- 2.1.0.27.g96db324

4 5

[U-Boot] MinnowBoard Max uboot
by Beaman, Thomas 03 Aug '15

03 Aug '15

Hi Simon, I see you have put support for the MinnowBoard Max in the u-boot mainline. Thanks this is a very useful addition. I have been able to follow your readme and build a working bare metal uboot. Using the built uboot I can load and bring up a Linux Kernel. What I noticed from the running kernel is that only one of the two cores on the E3825 is running. In the power PC uboots I usually see a section for the multiple cores in the .dts file. My questions is how do I get both CPUs running on this board. Is it a uboot .dts file setup that will enable this, or is something in the kernel start up that does this. As a test I boot the same kernel using the EFI BIOS on the minnow board and both CPUs are running. Any suggestions or comments you have would be welcomed. Thanks, Tom Beaman

3 17