U-Boot

Download

u-boot@lists2.denx.biz

March 2015

232 participants
631 discussions

[U-Boot] Please pull u-boot-sunxi master
by Hans de Goede 29 Mar '15

29 Mar '15

Hi Tom, Please pull u-boot-sunxi/master into master for another round of bugfixes for v2015.04: The following changes since commit 5db752353b6a19c50db4a30692efb7e845fb8a6e: powerpc: ppc4xx: convert AMCC boards to generic board (2015-03-28 12:09:46 -0400) are available in the git repository at: http://git.denx.de/u-boot-sunxi.git master for you to fetch changes up to 961e77712bbf14a6797bc0d725aed956cd06bce1: sunxi: a10-LIME set the cpu clock at boot to 912MHz (2015-03-29 13:37:39 +0200) ---------------------------------------------------------------- Hans de Goede (1): sunxi: musb: Fix some lo speed devices not working with musb host Iain Paton (3): sunxi: sun4i: improve cpu clock selection method sunxi: use CONFIG_SYS_CLK_FREQ to set cpu clock sunxi: a10-LIME set the cpu clock at boot to 912MHz Kconfig | 2 +- arch/arm/cpu/armv7/sunxi/clock_sun4i.c | 35 ++++++++++++++++++---------------- arch/arm/cpu/armv7/sunxi/psci.S | 2 +- arch/arm/cpu/armv7/sunxi/usbc.c | 7 +++++++ arch/arm/include/asm/arch-sunxi/usbc.h | 1 + board/sunxi/Kconfig | 4 ++++ board/sunxi/board.c | 2 +- configs/A10-OLinuXino-Lime_defconfig | 1 + drivers/usb/musb-new/musb_uboot.c | 14 ++++++++++++++ include/configs/sun4i.h | 1 - include/configs/sun5i.h | 1 - include/configs/sun6i.h | 1 - include/configs/sun7i.h | 4 +--- include/configs/sun8i.h | 1 - 14 files changed, 50 insertions(+), 26 deletions(-) Regards, Hans

1 0

[U-Boot] [PATCH] powerpc: ppc4xx: remove many AMCC non-generic boards
by Masahiro Yamada 28 Mar '15

28 Mar '15

Remove board support for acadia, bamboo, bubinga, ebony, katmai, haleakala, kilauea, luan, makalu, ocotea, redwood, rainier, sequoia, taihu, taishan, sycamore, walnut, yellowstone, yosemite, and yucca. They have not been converted into Generic Board yet. See doc/README.generic-board for details. Signed-off-by: Masahiro Yamada <yamada.masahiro(a)socionext.com> Cc: Stefan Roese <sr(a)denx.de> Cc: John Otken <jotken(a)softadvances.com> Cc: Feng Kan <fkan(a)amcc.com> --- arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c | 15 - arch/powerpc/cpu/ppc4xx/Kconfig | 64 - arch/powerpc/cpu/ppc4xx/start.S | 139 -- board/amcc/acadia/Kconfig | 12 - board/amcc/acadia/MAINTAINERS | 6 - board/amcc/acadia/Makefile | 8 - board/amcc/acadia/acadia.c | 101 -- board/amcc/acadia/cmd_acadia.c | 82 - board/amcc/acadia/config.mk | 14 - board/amcc/acadia/memory.c | 81 - board/amcc/acadia/pll.c | 137 -- board/amcc/bamboo/Kconfig | 12 - board/amcc/bamboo/MAINTAINERS | 6 - board/amcc/bamboo/Makefile | 9 - board/amcc/bamboo/README | 77 - board/amcc/bamboo/bamboo.c | 1896 ------------------------ board/amcc/bamboo/bamboo.h | 348 ----- board/amcc/bamboo/config.mk | 16 - board/amcc/bamboo/flash.c | 155 -- board/amcc/bamboo/init.S | 55 - board/amcc/bubinga/Kconfig | 12 - board/amcc/bubinga/MAINTAINERS | 6 - board/amcc/bubinga/Makefile | 8 - board/amcc/bubinga/bubinga.c | 64 - board/amcc/bubinga/flash.c | 188 --- board/amcc/ebony/Kconfig | 12 - board/amcc/ebony/MAINTAINERS | 6 - board/amcc/ebony/Makefile | 9 - board/amcc/ebony/README | 136 -- board/amcc/ebony/config.mk | 16 - board/amcc/ebony/ebony.c | 151 -- board/amcc/ebony/flash.c | 155 -- board/amcc/ebony/init.S | 41 - board/amcc/katmai/Kconfig | 12 - board/amcc/katmai/MAINTAINERS | 6 - board/amcc/katmai/Makefile | 10 - board/amcc/katmai/chip_config.c | 38 - board/amcc/katmai/config.mk | 20 - board/amcc/katmai/init.S | 103 -- board/amcc/katmai/katmai.c | 270 ---- board/amcc/kilauea/Kconfig | 12 - board/amcc/kilauea/MAINTAINERS | 7 - board/amcc/kilauea/Makefile | 9 - board/amcc/kilauea/chip_config.c | 72 - board/amcc/kilauea/config.mk | 10 - board/amcc/kilauea/kilauea.c | 309 ---- board/amcc/luan/Kconfig | 12 - board/amcc/luan/MAINTAINERS | 6 - board/amcc/luan/Makefile | 9 - board/amcc/luan/config.mk | 16 - board/amcc/luan/epld.h | 85 -- board/amcc/luan/flash.c | 95 -- board/amcc/luan/init.S | 59 - board/amcc/luan/luan.c | 223 --- board/amcc/makalu/Kconfig | 12 - board/amcc/makalu/MAINTAINERS | 6 - board/amcc/makalu/Makefile | 9 - board/amcc/makalu/cmd_pll.c | 279 ---- board/amcc/makalu/init.S | 15 - board/amcc/makalu/makalu.c | 223 --- board/amcc/ocotea/Kconfig | 12 - board/amcc/ocotea/MAINTAINERS | 6 - board/amcc/ocotea/Makefile | 9 - board/amcc/ocotea/README.ocotea | 73 - board/amcc/ocotea/README.ocotea-PIBS-to-U-Boot | 99 -- board/amcc/ocotea/config.mk | 20 - board/amcc/ocotea/flash.c | 134 -- board/amcc/ocotea/init.S | 42 - board/amcc/ocotea/ocotea.c | 387 ----- board/amcc/ocotea/ocotea.h | 125 -- board/amcc/redwood/Kconfig | 12 - board/amcc/redwood/MAINTAINERS | 6 - board/amcc/redwood/Makefile | 9 - board/amcc/redwood/config.mk | 20 - board/amcc/redwood/init.S | 62 - board/amcc/redwood/redwood.c | 440 ------ board/amcc/redwood/redwood.h | 34 - board/amcc/sequoia/Kconfig | 12 - board/amcc/sequoia/MAINTAINERS | 9 - board/amcc/sequoia/Makefile | 10 - board/amcc/sequoia/chip_config.c | 105 -- board/amcc/sequoia/config.mk | 19 - board/amcc/sequoia/init.S | 79 - board/amcc/sequoia/sdram.c | 92 -- board/amcc/sequoia/sequoia.c | 413 ------ board/amcc/sequoia/u-boot-ram.lds | 79 - board/amcc/taihu/Kconfig | 12 - board/amcc/taihu/MAINTAINERS | 6 - board/amcc/taihu/Makefile | 8 - board/amcc/taihu/flash.c | 1063 ------------- board/amcc/taihu/lcd.c | 237 --- board/amcc/taihu/taihu.c | 180 --- board/amcc/taihu/update.c | 116 -- board/amcc/taishan/Kconfig | 12 - board/amcc/taishan/MAINTAINERS | 6 - board/amcc/taishan/Makefile | 9 - board/amcc/taishan/config.mk | 20 - board/amcc/taishan/init.S | 35 - board/amcc/taishan/lcd.c | 358 ----- board/amcc/taishan/showinfo.c | 220 --- board/amcc/taishan/taishan.c | 201 --- board/amcc/taishan/update.c | 62 - board/amcc/walnut/Kconfig | 12 - board/amcc/walnut/MAINTAINERS | 7 - board/amcc/walnut/Makefile | 8 - board/amcc/walnut/flash.c | 183 --- board/amcc/walnut/walnut.c | 80 - board/amcc/yosemite/Kconfig | 12 - board/amcc/yosemite/MAINTAINERS | 7 - board/amcc/yosemite/Makefile | 9 - board/amcc/yosemite/config.mk | 16 - board/amcc/yosemite/init.S | 49 - board/amcc/yosemite/yosemite.c | 357 ----- board/amcc/yucca/Kconfig | 12 - board/amcc/yucca/MAINTAINERS | 6 - board/amcc/yucca/Makefile | 9 - board/amcc/yucca/cmd_yucca.c | 268 ---- board/amcc/yucca/config.mk | 26 - board/amcc/yucca/flash.c | 1033 ------------- board/amcc/yucca/init.S | 106 -- board/amcc/yucca/yucca.c | 714 --------- board/amcc/yucca/yucca.h | 350 ----- configs/acadia_defconfig | 3 - configs/bamboo_defconfig | 3 - configs/bubinga_defconfig | 3 - configs/ebony_defconfig | 3 - configs/haleakala_defconfig | 4 - configs/katmai_defconfig | 3 - configs/kilauea_defconfig | 4 - configs/luan_defconfig | 3 - configs/makalu_defconfig | 3 - configs/ocotea_defconfig | 3 - configs/rainier_defconfig | 4 - configs/rainier_ramboot_defconfig | 4 - configs/redwood_defconfig | 3 - configs/sequoia_defconfig | 4 - configs/sequoia_ramboot_defconfig | 4 - configs/sycamore_defconfig | 3 - configs/taihu_defconfig | 3 - configs/taishan_defconfig | 3 - configs/walnut_defconfig | 3 - configs/yellowstone_defconfig | 4 - configs/yosemite_defconfig | 4 - configs/yucca_defconfig | 3 - doc/README.scrapyard | 36 +- include/configs/acadia.h | 265 ---- include/configs/bamboo.h | 222 --- include/configs/bubinga.h | 305 ---- include/configs/ebony.h | 174 --- include/configs/katmai.h | 324 ---- include/configs/kilauea.h | 534 ------- include/configs/luan.h | 177 --- include/configs/makalu.h | 345 ----- include/configs/ocotea.h | 194 --- include/configs/redwood.h | 172 --- include/configs/sequoia.h | 435 ------ include/configs/taihu.h | 307 ---- include/configs/taishan.h | 193 --- include/configs/walnut.h | 214 --- include/configs/yosemite.h | 236 --- include/configs/yucca.h | 413 ------ 161 files changed, 28 insertions(+), 18673 deletions(-) delete mode 100644 board/amcc/acadia/Kconfig delete mode 100644 board/amcc/acadia/MAINTAINERS delete mode 100644 board/amcc/acadia/Makefile delete mode 100644 board/amcc/acadia/acadia.c delete mode 100644 board/amcc/acadia/cmd_acadia.c delete mode 100644 board/amcc/acadia/config.mk delete mode 100644 board/amcc/acadia/memory.c delete mode 100644 board/amcc/acadia/pll.c delete mode 100644 board/amcc/bamboo/Kconfig delete mode 100644 board/amcc/bamboo/MAINTAINERS delete mode 100644 board/amcc/bamboo/Makefile delete mode 100644 board/amcc/bamboo/README delete mode 100644 board/amcc/bamboo/bamboo.c delete mode 100644 board/amcc/bamboo/bamboo.h delete mode 100644 board/amcc/bamboo/config.mk delete mode 100644 board/amcc/bamboo/flash.c delete mode 100644 board/amcc/bamboo/init.S delete mode 100644 board/amcc/bubinga/Kconfig delete mode 100644 board/amcc/bubinga/MAINTAINERS delete mode 100644 board/amcc/bubinga/Makefile delete mode 100644 board/amcc/bubinga/bubinga.c delete mode 100644 board/amcc/bubinga/flash.c delete mode 100644 board/amcc/ebony/Kconfig delete mode 100644 board/amcc/ebony/MAINTAINERS delete mode 100644 board/amcc/ebony/Makefile delete mode 100644 board/amcc/ebony/README delete mode 100644 board/amcc/ebony/config.mk delete mode 100644 board/amcc/ebony/ebony.c delete mode 100644 board/amcc/ebony/flash.c delete mode 100644 board/amcc/ebony/init.S delete mode 100644 board/amcc/katmai/Kconfig delete mode 100644 board/amcc/katmai/MAINTAINERS delete mode 100644 board/amcc/katmai/Makefile delete mode 100644 board/amcc/katmai/chip_config.c delete mode 100644 board/amcc/katmai/config.mk delete mode 100644 board/amcc/katmai/init.S delete mode 100644 board/amcc/katmai/katmai.c delete mode 100644 board/amcc/kilauea/Kconfig delete mode 100644 board/amcc/kilauea/MAINTAINERS delete mode 100644 board/amcc/kilauea/Makefile delete mode 100644 board/amcc/kilauea/chip_config.c delete mode 100644 board/amcc/kilauea/config.mk delete mode 100644 board/amcc/kilauea/kilauea.c delete mode 100644 board/amcc/luan/Kconfig delete mode 100644 board/amcc/luan/MAINTAINERS delete mode 100644 board/amcc/luan/Makefile delete mode 100644 board/amcc/luan/config.mk delete mode 100644 board/amcc/luan/epld.h delete mode 100644 board/amcc/luan/flash.c delete mode 100644 board/amcc/luan/init.S delete mode 100644 board/amcc/luan/luan.c delete mode 100644 board/amcc/makalu/Kconfig delete mode 100644 board/amcc/makalu/MAINTAINERS delete mode 100644 board/amcc/makalu/Makefile delete mode 100644 board/amcc/makalu/cmd_pll.c delete mode 100644 board/amcc/makalu/init.S delete mode 100644 board/amcc/makalu/makalu.c delete mode 100644 board/amcc/ocotea/Kconfig delete mode 100644 board/amcc/ocotea/MAINTAINERS delete mode 100644 board/amcc/ocotea/Makefile delete mode 100644 board/amcc/ocotea/README.ocotea delete mode 100644 board/amcc/ocotea/README.ocotea-PIBS-to-U-Boot delete mode 100644 board/amcc/ocotea/config.mk delete mode 100644 board/amcc/ocotea/flash.c delete mode 100644 board/amcc/ocotea/init.S delete mode 100644 board/amcc/ocotea/ocotea.c delete mode 100644 board/amcc/ocotea/ocotea.h delete mode 100644 board/amcc/redwood/Kconfig delete mode 100644 board/amcc/redwood/MAINTAINERS delete mode 100644 board/amcc/redwood/Makefile delete mode 100644 board/amcc/redwood/config.mk delete mode 100644 board/amcc/redwood/init.S delete mode 100644 board/amcc/redwood/redwood.c delete mode 100644 board/amcc/redwood/redwood.h delete mode 100644 board/amcc/sequoia/Kconfig delete mode 100644 board/amcc/sequoia/MAINTAINERS delete mode 100644 board/amcc/sequoia/Makefile delete mode 100644 board/amcc/sequoia/chip_config.c delete mode 100644 board/amcc/sequoia/config.mk delete mode 100644 board/amcc/sequoia/init.S delete mode 100644 board/amcc/sequoia/sdram.c delete mode 100644 board/amcc/sequoia/sequoia.c delete mode 100644 board/amcc/sequoia/u-boot-ram.lds delete mode 100644 board/amcc/taihu/Kconfig delete mode 100644 board/amcc/taihu/MAINTAINERS delete mode 100644 board/amcc/taihu/Makefile delete mode 100644 board/amcc/taihu/flash.c delete mode 100644 board/amcc/taihu/lcd.c delete mode 100644 board/amcc/taihu/taihu.c delete mode 100644 board/amcc/taihu/update.c delete mode 100644 board/amcc/taishan/Kconfig delete mode 100644 board/amcc/taishan/MAINTAINERS delete mode 100644 board/amcc/taishan/Makefile delete mode 100644 board/amcc/taishan/config.mk delete mode 100644 board/amcc/taishan/init.S delete mode 100644 board/amcc/taishan/lcd.c delete mode 100644 board/amcc/taishan/showinfo.c delete mode 100644 board/amcc/taishan/taishan.c delete mode 100644 board/amcc/taishan/update.c delete mode 100644 board/amcc/walnut/Kconfig delete mode 100644 board/amcc/walnut/MAINTAINERS delete mode 100644 board/amcc/walnut/Makefile delete mode 100644 board/amcc/walnut/flash.c delete mode 100644 board/amcc/walnut/walnut.c delete mode 100644 board/amcc/yosemite/Kconfig delete mode 100644 board/amcc/yosemite/MAINTAINERS delete mode 100644 board/amcc/yosemite/Makefile delete mode 100644 board/amcc/yosemite/config.mk delete mode 100644 board/amcc/yosemite/init.S delete mode 100644 board/amcc/yosemite/yosemite.c delete mode 100644 board/amcc/yucca/Kconfig delete mode 100644 board/amcc/yucca/MAINTAINERS delete mode 100644 board/amcc/yucca/Makefile delete mode 100644 board/amcc/yucca/cmd_yucca.c delete mode 100644 board/amcc/yucca/config.mk delete mode 100644 board/amcc/yucca/flash.c delete mode 100644 board/amcc/yucca/init.S delete mode 100644 board/amcc/yucca/yucca.c delete mode 100644 board/amcc/yucca/yucca.h delete mode 100644 configs/acadia_defconfig delete mode 100644 configs/bamboo_defconfig delete mode 100644 configs/bubinga_defconfig delete mode 100644 configs/ebony_defconfig delete mode 100644 configs/haleakala_defconfig delete mode 100644 configs/katmai_defconfig delete mode 100644 configs/kilauea_defconfig delete mode 100644 configs/luan_defconfig delete mode 100644 configs/makalu_defconfig delete mode 100644 configs/ocotea_defconfig delete mode 100644 configs/rainier_defconfig delete mode 100644 configs/rainier_ramboot_defconfig delete mode 100644 configs/redwood_defconfig delete mode 100644 configs/sequoia_defconfig delete mode 100644 configs/sequoia_ramboot_defconfig delete mode 100644 configs/sycamore_defconfig delete mode 100644 configs/taihu_defconfig delete mode 100644 configs/taishan_defconfig delete mode 100644 configs/walnut_defconfig delete mode 100644 configs/yellowstone_defconfig delete mode 100644 configs/yosemite_defconfig delete mode 100644 configs/yucca_defconfig delete mode 100644 include/configs/acadia.h delete mode 100644 include/configs/bamboo.h delete mode 100644 include/configs/bubinga.h delete mode 100644 include/configs/ebony.h delete mode 100644 include/configs/katmai.h delete mode 100644 include/configs/kilauea.h delete mode 100644 include/configs/luan.h delete mode 100644 include/configs/makalu.h delete mode 100644 include/configs/ocotea.h delete mode 100644 include/configs/redwood.h delete mode 100644 include/configs/sequoia.h delete mode 100644 include/configs/taihu.h delete mode 100644 include/configs/taishan.h delete mode 100644 include/configs/walnut.h delete mode 100644 include/configs/yosemite.h delete mode 100644 include/configs/yucca.h diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c index 36e7b01..a1f26e7 100644 --- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c +++ b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c @@ -1064,27 +1064,12 @@ static unsigned long program_bxcr(unsigned long *dimm_populated, bank_parms[bx_cr_num].bank_size_bytes = 0; } -#ifdef CONFIG_BAMBOO - /* - * This next section is hardware dependent and must be programmed - * to match the hardware. For bamboo, the following holds... - * 1. SDRAM0_B0CR: Bank 0 of dimm 0 ctrl_bank_num : 0 (soldered onboard) - * 2. SDRAM0_B1CR: Bank 0 of dimm 1 ctrl_bank_num : 1 - * 3. SDRAM0_B2CR: Bank 1 of dimm 1 ctrl_bank_num : 1 - * 4. SDRAM0_B3CR: Bank 0 of dimm 2 ctrl_bank_num : 3 - * ctrl_bank_num corresponds to the first usable DDR controller bank number by DIMM - */ - ctrl_bank_num[0] = 0; - ctrl_bank_num[1] = 1; - ctrl_bank_num[2] = 3; -#else /* * Ocotea, Ebony and the other IBM/AMCC eval boards have * 2 DIMM slots with each max 2 banks */ ctrl_bank_num[0] = 0; ctrl_bank_num[1] = 2; -#endif /* * reset the bank_base address diff --git a/arch/powerpc/cpu/ppc4xx/Kconfig b/arch/powerpc/cpu/ppc4xx/Kconfig index 9e52d3f..3eae2c7 100644 --- a/arch/powerpc/cpu/ppc4xx/Kconfig +++ b/arch/powerpc/cpu/ppc4xx/Kconfig @@ -32,57 +32,9 @@ config TARGET_T3CORP config TARGET_ZEUS bool "Support zeus" -config TARGET_ACADIA - bool "Support acadia" - -config TARGET_BAMBOO - bool "Support bamboo" - -config TARGET_BUBINGA - bool "Support bubinga" - config TARGET_CANYONLANDS bool "Support canyonlands" -config TARGET_EBONY - bool "Support ebony" - -config TARGET_KATMAI - bool "Support katmai" - -config TARGET_KILAUEA - bool "Support kilauea" - -config TARGET_LUAN - bool "Support luan" - -config TARGET_MAKALU - bool "Support makalu" - -config TARGET_OCOTEA - bool "Support ocotea" - -config TARGET_REDWOOD - bool "Support redwood" - -config TARGET_SEQUOIA - bool "Support sequoia" - -config TARGET_TAIHU - bool "Support taihu" - -config TARGET_TAISHAN - bool "Support taishan" - -config TARGET_WALNUT - bool "Support walnut" - -config TARGET_YOSEMITE - bool "Support yosemite" - -config TARGET_YUCCA - bool "Support yucca" - config TARGET_FX12MM bool "Support fx12mm" @@ -160,23 +112,7 @@ config TARGET_XILINX_PPC440_GENERIC endchoice -source "board/amcc/acadia/Kconfig" -source "board/amcc/bamboo/Kconfig" -source "board/amcc/bubinga/Kconfig" source "board/amcc/canyonlands/Kconfig" -source "board/amcc/ebony/Kconfig" -source "board/amcc/katmai/Kconfig" -source "board/amcc/kilauea/Kconfig" -source "board/amcc/luan/Kconfig" -source "board/amcc/makalu/Kconfig" -source "board/amcc/ocotea/Kconfig" -source "board/amcc/redwood/Kconfig" -source "board/amcc/sequoia/Kconfig" -source "board/amcc/taihu/Kconfig" -source "board/amcc/taishan/Kconfig" -source "board/amcc/walnut/Kconfig" -source "board/amcc/yosemite/Kconfig" -source "board/amcc/yucca/Kconfig" source "board/avnet/fx12mm/Kconfig" source "board/avnet/v5fx30teval/Kconfig" source "board/csb272/Kconfig" diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S index 7a0f0d2..6daf545 100644 --- a/arch/powerpc/cpu/ppc4xx/start.S +++ b/arch/powerpc/cpu/ppc4xx/start.S @@ -1661,85 +1661,6 @@ in32: #ifdef CONFIG_405EP ppc405ep_init: -#ifdef CONFIG_BUBINGA - /* - * Initialize EBC chip selects 1 & 4 and GPIO pins (for alternate - * function) to support FPGA and NVRAM accesses below. - */ - - lis r3,GPIO0_OSRH@h /* config GPIO output select */ - ori r3,r3,GPIO0_OSRH@l - lis r4,CONFIG_SYS_GPIO0_OSRH@h - ori r4,r4,CONFIG_SYS_GPIO0_OSRH@l - stw r4,0(r3) - lis r3,GPIO0_OSRL@h - ori r3,r3,GPIO0_OSRL@l - lis r4,CONFIG_SYS_GPIO0_OSRL@h - ori r4,r4,CONFIG_SYS_GPIO0_OSRL@l - stw r4,0(r3) - - lis r3,GPIO0_ISR1H@h /* config GPIO input select */ - ori r3,r3,GPIO0_ISR1H@l - lis r4,CONFIG_SYS_GPIO0_ISR1H@h - ori r4,r4,CONFIG_SYS_GPIO0_ISR1H@l - stw r4,0(r3) - lis r3,GPIO0_ISR1L@h - ori r3,r3,GPIO0_ISR1L@l - lis r4,CONFIG_SYS_GPIO0_ISR1L@h - ori r4,r4,CONFIG_SYS_GPIO0_ISR1L@l - stw r4,0(r3) - - lis r3,GPIO0_TSRH@h /* config GPIO three-state select */ - ori r3,r3,GPIO0_TSRH@l - lis r4,CONFIG_SYS_GPIO0_TSRH@h - ori r4,r4,CONFIG_SYS_GPIO0_TSRH@l - stw r4,0(r3) - lis r3,GPIO0_TSRL@h - ori r3,r3,GPIO0_TSRL@l - lis r4,CONFIG_SYS_GPIO0_TSRL@h - ori r4,r4,CONFIG_SYS_GPIO0_TSRL@l - stw r4,0(r3) - - lis r3,GPIO0_TCR@h /* config GPIO driver output enables */ - ori r3,r3,GPIO0_TCR@l - lis r4,CONFIG_SYS_GPIO0_TCR@h - ori r4,r4,CONFIG_SYS_GPIO0_TCR@l - stw r4,0(r3) - - li r3,PB1AP /* program EBC bank 1 for RTC access */ - mtdcr EBC0_CFGADDR,r3 - lis r3,CONFIG_SYS_EBC_PB1AP@h - ori r3,r3,CONFIG_SYS_EBC_PB1AP@l - mtdcr EBC0_CFGDATA,r3 - li r3,PB1CR - mtdcr EBC0_CFGADDR,r3 - lis r3,CONFIG_SYS_EBC_PB1CR@h - ori r3,r3,CONFIG_SYS_EBC_PB1CR@l - mtdcr EBC0_CFGDATA,r3 - - li r3,PB1AP /* program EBC bank 1 for RTC access */ - mtdcr EBC0_CFGADDR,r3 - lis r3,CONFIG_SYS_EBC_PB1AP@h - ori r3,r3,CONFIG_SYS_EBC_PB1AP@l - mtdcr EBC0_CFGDATA,r3 - li r3,PB1CR - mtdcr EBC0_CFGADDR,r3 - lis r3,CONFIG_SYS_EBC_PB1CR@h - ori r3,r3,CONFIG_SYS_EBC_PB1CR@l - mtdcr EBC0_CFGDATA,r3 - - li r3,PB4AP /* program EBC bank 4 for FPGA access */ - mtdcr EBC0_CFGADDR,r3 - lis r3,CONFIG_SYS_EBC_PB4AP@h - ori r3,r3,CONFIG_SYS_EBC_PB4AP@l - mtdcr EBC0_CFGDATA,r3 - li r3,PB4CR - mtdcr EBC0_CFGADDR,r3 - lis r3,CONFIG_SYS_EBC_PB4CR@h - ori r3,r3,CONFIG_SYS_EBC_PB4CR@l - mtdcr EBC0_CFGDATA,r3 -#endif - /* !----------------------------------------------------------------------- ! Check to see if chip is in bypass mode. @@ -1758,53 +1679,6 @@ ppc405ep_init: /* and CPU has been reset */ /* so skip to next section */ -#ifdef CONFIG_BUBINGA - /* - !----------------------------------------------------------------------- - ! Read NVRAM to get value to write in PLLMR. - ! If value has not been correctly saved, write default value - ! Default config values (assuming on-board 33MHz SYS_CLK) are above. - ! See CPU_DEFAULT_200 and CPU_DEFAULT_266 above. - ! - ! WARNING: This code assumes the first three words in the nvram_t - ! structure in openbios.h. Changing the beginning of - ! the structure will break this code. - ! - !----------------------------------------------------------------------- - */ - addis r3,0,NVRAM_BASE@h - addi r3,r3,NVRAM_BASE@l - - lwz r4, 0(r3) - addis r5,0,NVRVFY1@h - addi r5,r5,NVRVFY1@l - cmp cr0,0,r4,r5 /* Compare 1st NVRAM Magic number*/ - bne ..no_pllset - addi r3,r3,4 - lwz r4, 0(r3) - addis r5,0,NVRVFY2@h - addi r5,r5,NVRVFY2@l - cmp cr0,0,r4,r5 /* Compare 2 NVRAM Magic number */ - bne ..no_pllset - addi r3,r3,8 /* Skip over conf_size */ - lwz r4, 4(r3) /* Load PLLMR1 value from NVRAM */ - lwz r3, 0(r3) /* Load PLLMR0 value from NVRAM */ - rlwinm r5,r4,1,0x1 /* get system clock source (SSCS) */ - cmpi cr0,0,r5,1 /* See if PLL is locked */ - beq pll_write -..no_pllset: -#endif /* CONFIG_BUBINGA */ - -#ifdef CONFIG_TAIHU - mfdcr r4, CPC0_BOOT - andi. r5, r4, CPC0_BOOT_SEP@l - bne strap_1 /* serial eeprom present */ - addis r5,0,CPLD_REG0_ADDR@h - ori r5,r5,CPLD_REG0_ADDR@l - andi. r5, r5, 0x10 - bne _pci_66mhz -#endif /* CONFIG_TAIHU */ - #if defined(CONFIG_ZEUS) mfdcr r4, CPC0_BOOT andi. r5, r4, CPC0_BOOT_SEP@l @@ -1825,19 +1699,6 @@ strap_1: addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */ ori r4,r4,PLLMR1_DEFAULT@l /* */ -#ifdef CONFIG_TAIHU - b 1f -_pci_66mhz: - addis r3,0,PLLMR0_DEFAULT_PCI66@h - ori r3,r3,PLLMR0_DEFAULT_PCI66@l - addis r4,0,PLLMR1_DEFAULT_PCI66@h - ori r4,r4,PLLMR1_DEFAULT_PCI66@l - b 1f -strap_1: - mfdcr r3, CPC0_PLLMR0 - mfdcr r4, CPC0_PLLMR1 -#endif /* CONFIG_TAIHU */ - 1: b pll_write /* Write the CPC0_PLLMR with new value */ diff --git a/board/amcc/acadia/Kconfig b/board/amcc/acadia/Kconfig deleted file mode 100644 index 033deaf..0000000 --- a/board/amcc/acadia/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_ACADIA - -config SYS_BOARD - default "acadia" - -config SYS_VENDOR - default "amcc" - -config SYS_CONFIG_NAME - default "acadia" - -endif diff --git a/board/amcc/acadia/MAINTAINERS b/board/amcc/acadia/MAINTAINERS deleted file mode 100644 index c16961f..0000000 --- a/board/amcc/acadia/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -ACADIA BOARD -M: Stefan Roese <sr(a)denx.de> -S: Maintained -F: board/amcc/acadia/ -F: include/configs/acadia.h -F: configs/acadia_defconfig diff --git a/board/amcc/acadia/Makefile b/board/amcc/acadia/Makefile deleted file mode 100644 index 035f407..0000000 --- a/board/amcc/acadia/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2007 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = acadia.o cmd_acadia.o memory.o pll.o diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c deleted file mode 100644 index 2eb18df..0000000 --- a/board/amcc/acadia/acadia.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/processor.h> - -extern void board_pll_init_f(void); - -static void acadia_gpio_init(void) -{ - /* - * GPIO0 setup (select GPIO or alternate function) - */ - out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL); - out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH); /* output select */ - out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L); - out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H); /* input select */ - out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL); - out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH); /* three-state select */ - out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR); /* enable output driver for outputs */ - - /* - * Ultra (405EZ) was nice enough to add another GPIO controller - */ - out32(GPIO1_OSRH, CONFIG_SYS_GPIO1_OSRH); /* output select */ - out32(GPIO1_OSRL, CONFIG_SYS_GPIO1_OSRL); - out32(GPIO1_ISR1H, CONFIG_SYS_GPIO1_ISR1H); /* input select */ - out32(GPIO1_ISR1L, CONFIG_SYS_GPIO1_ISR1L); - out32(GPIO1_TSRH, CONFIG_SYS_GPIO1_TSRH); /* three-state select */ - out32(GPIO1_TSRL, CONFIG_SYS_GPIO1_TSRL); - out32(GPIO1_TCR, CONFIG_SYS_GPIO1_TCR); /* enable output driver for outputs */ -} - -int board_early_init_f(void) -{ - unsigned int reg; - - /* don't reinit PLL when booting via I2C bootstrap option */ - mfsdr(SDR0_PINSTP, reg); - if (reg != 0xf0000000) - board_pll_init_f(); - - acadia_gpio_init(); - - /* Configure 405EZ for NAND usage */ - mtsdr(SDR0_NAND0, SDR_NAND0_NDEN | SDR_NAND0_NDAREN | SDR_NAND0_NDRBEN); - mfsdr(SDR0_ULTRA0, reg); - reg &= ~SDR_ULTRA0_CSN_MASK; - reg |= (SDR_ULTRA0_CSNSEL0 >> CONFIG_SYS_NAND_CS) | - SDR_ULTRA0_NDGPIOBP | - SDR_ULTRA0_EBCRDYEN | - SDR_ULTRA0_NFSRSTEN; - mtsdr(SDR0_ULTRA0, reg); - - /* USB Host core needs this bit set */ - mfsdr(SDR0_ULTRA1, reg); - mtsdr(SDR0_ULTRA1, reg | SDR_ULTRA1_LEDNENABLE); - - mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ - mtdcr(UIC0ER, 0x00000000); /* disable all ints */ - mtdcr(UIC0CR, 0x00000010); - mtdcr(UIC0PR, 0xFE7FFFF0); /* set int polarities */ - mtdcr(UIC0TR, 0x00000010); /* set int trigger levels */ - mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ - - return 0; -} - -int misc_init_f(void) -{ - /* Set EPLD to take PHY out of reset */ - out8(CONFIG_SYS_CPLD_BASE + 0x05, 0x00); - udelay(100000); - - return 0; -} - -/* - * Check Board Identity: - */ -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - u8 rev; - - rev = in8(CONFIG_SYS_CPLD_BASE + 0); - printf("Board: Acadia - AMCC PPC405EZ Evaluation Board, Rev. %X", rev); - - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - return (0); -} diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c deleted file mode 100644 index e9df61b..0000000 --- a/board/amcc/acadia/cmd_acadia.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <i2c.h> - -static u8 boot_267_nor[] = { - 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x8e, 0x00, - 0x14, 0xc0, 0x36, 0xcc, 0x00, 0x0c, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00 -}; - -static u8 boot_267_nand[] = { - 0xd0, 0x38, 0xc3, 0x50, 0x13, 0x88, 0x8e, 0x00, - 0x14, 0xc0, 0x36, 0xcc, 0x00, 0x0c, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00 -}; - -static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - u8 chip; - u8 *buf; - int cpu_freq; - - if (argc < 3) - return cmd_usage(cmdtp); - - cpu_freq = simple_strtol(argv[1], NULL, 10); - if (cpu_freq != 267) { - printf("Unsupported cpu-frequency - only 267 supported\n"); - return 1; - } - - /* use 0x50 as I2C EEPROM address for now */ - chip = 0x50; - - if ((strcmp(argv[2], "nor") != 0) && - (strcmp(argv[2], "nand") != 0)) { - printf("Unsupported boot-device - only nor|nand support\n"); - return 1; - } - - if (strcmp(argv[2], "nand") == 0) { - switch (cpu_freq) { - case 267: - buf = boot_267_nand; - break; - default: - break; - } - } else { - switch (cpu_freq) { - case 267: - buf = boot_267_nor; - break; - default: - break; - } - } - - if (i2c_write(chip, 0, 1, buf, 16) != 0) - printf("Error writing to EEPROM at address 0x%x\n", chip); - udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000); - if (i2c_write(chip, 0x10, 1, buf+16, 4) != 0) - printf("Error2 writing to EEPROM at address 0x%x\n", chip); - - printf("Done\n"); - printf("Please power-cycle the board for the changes to take effect\n"); - - return 0; -} - -U_BOOT_CMD( - bootstrap, 3, 0, do_bootstrap, - "program the I2C bootstrap EEPROM", - "<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM" -); diff --git a/board/amcc/acadia/config.mk b/board/amcc/acadia/config.mk deleted file mode 100644 index 5350ec0..0000000 --- a/board/amcc/acadia/config.mk +++ /dev/null @@ -1,14 +0,0 @@ -# -# (C) Copyright 2007-2010 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# AMCC 405EZ Reference Platform (Acadia) board -# - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c deleted file mode 100644 index 9673118..0000000 --- a/board/amcc/acadia/memory.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* define DEBUG for debugging output (obviously ;-)) */ -#if 0 -#define DEBUG -#endif - -#include <common.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/ppc4xx-gpio.h> - -extern void board_pll_init_f(void); - -static void cram_bcr_write(u32 wr_val) -{ - wr_val <<= 2; - - /* set CRAM_CRE to 1 */ - gpio_write_bit(CONFIG_SYS_GPIO_CRAM_CRE, 1); - - /* Write BCR to CRAM on CS1 */ - out32(wr_val + 0x00200000, 0); - debug("CRAM VAL: %08x for CS1 ", wr_val + 0x00200000); - - /* Write BCR to CRAM on CS2 */ - out32(wr_val + 0x02200000, 0); - debug("CRAM VAL: %08x for CS2\n", wr_val + 0x02200000); - - sync(); - eieio(); - - /* set CRAM_CRE back to 0 (normal operation) */ - gpio_write_bit(CONFIG_SYS_GPIO_CRAM_CRE, 0); - - return; -} - -phys_size_t initdram(int board_type) -{ - int i; - u32 val; - - /* 1. EBC need to program READY, CLK, ADV for ASync mode */ - gpio_config(CONFIG_SYS_GPIO_CRAM_CLK, GPIO_OUT, GPIO_SEL, GPIO_OUT_0); - gpio_config(CONFIG_SYS_GPIO_CRAM_ADV, GPIO_OUT, GPIO_SEL, GPIO_OUT_0); - gpio_config(CONFIG_SYS_GPIO_CRAM_CRE, GPIO_OUT, GPIO_SEL, GPIO_OUT_0); - gpio_config(CONFIG_SYS_GPIO_CRAM_WAIT, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG); - - /* 2. EBC in Async mode */ - mtebc(PB1AP, 0x078F1EC0); - mtebc(PB2AP, 0x078F1EC0); - mtebc(PB1CR, 0x000BC000); - mtebc(PB2CR, 0x020BC000); - - /* 3. Set CRAM in Sync mode */ - cram_bcr_write(0x7012); /* CRAM burst setting */ - - /* 4. EBC in Sync mode */ - mtebc(PB1AP, 0x9C0201C0); - mtebc(PB2AP, 0x9C0201C0); - - /* Set GPIO pins back to alternate function */ - gpio_config(CONFIG_SYS_GPIO_CRAM_CLK, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG); - gpio_config(CONFIG_SYS_GPIO_CRAM_ADV, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG); - - /* Config EBC to use RDY */ - mfsdr(SDR0_ULTRA0, val); - mtsdr(SDR0_ULTRA0, val | SDR_ULTRA0_EBCRDYEN); - - /* Wait a short while, since for NAND booting this is too fast */ - for (i=0; i<200000; i++) - ; - - return (CONFIG_SYS_MBYTES_RAM << 20); -} diff --git a/board/amcc/acadia/pll.c b/board/amcc/acadia/pll.c deleted file mode 100644 index d868582..0000000 --- a/board/amcc/acadia/pll.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/processor.h> -#include <asm/ppc405.h> - -/* test-only: move into cpu directory!!! */ - -#if defined(PLLMR0_200_133_66) -void board_pll_init_f(void) -{ - /* - * set PLL clocks based on input sysclk is 33M - * - * ---------------------------------- - * | CLK | FREQ (MHz) | DIV RATIO | - * ---------------------------------- - * | CPU | 200.0 | 4 (0x02)| - * | PLB | 133.3 | 6 (0x06)| - * | OPB | 66.6 | 12 (0x0C)| - * | EBC | 66.6 | 12 (0x0C)| - * | SPI | 66.6 | 12 (0x0C)| - * | UART0 | 10.0 | 40 (0x28)| - * | UART1 | 10.0 | 40 (0x28)| - * | DAC | 2.0 | 200 (0xC8)| - * | ADC | 2.0 | 200 (0xC8)| - * | PWM | 100.0 | 4 (0x04)| - * | EMAC | 25.0 | 16 (0x10)| - * ----------------------------------- - */ - - /* Initialize PLL */ - mtcpr(CPR0_PLLC, 0x0000033c); - mtcpr(CPR0_PLLD, 0x0c010200); - mtcpr(CPR0_PRIMAD, 0x04060c0c); - mtcpr(CPR0_PERD0, 0x000c0000); /* SPI clk div. eq. OPB clk div. */ - mtcpr(CPR0_CLKUPD, 0x40000000); -} - -#elif defined(PLLMR0_266_160_80) - -void board_pll_init_f(void) -{ - /* - * set PLL clocks based on input sysclk is 33M - * - * ---------------------------------- - * | CLK | FREQ (MHz) | DIV RATIO | - * ---------------------------------- - * | CPU | 266.64 | 3 | - * | PLB | 159.98 | 5 (0x05)| - * | OPB | 79.99 | 10 (0x0A)| - * | EBC | 79.99 | 10 (0x0A)| - * | SPI | 79.99 | 10 (0x0A)| - * | UART0 | 28.57 | 7 (0x07)| - * | UART1 | 28.57 | 7 (0x07)| - * | DAC | 28.57 | 7 (0xA7)| - * | ADC | 4 | 50 (0x32)| - * | PWM | 28.57 | 7 (0x07)| - * | EMAC | 4 | 50 (0x32)| - * ----------------------------------- - */ - - /* Initialize PLL */ - mtcpr(CPR0_PLLC, 0x20000238); - mtcpr(CPR0_PLLD, 0x03010400); - mtcpr(CPR0_PRIMAD, 0x03050a0a); - mtcpr(CPR0_PERC0, 0x00000000); - mtcpr(CPR0_PERD0, 0x070a0707); /* SPI clk div. eq. OPB clk div. */ - mtcpr(CPR0_PERD1, 0x07323200); - mtcpr(CPR0_CLKUP, 0x40000000); -} - -#elif defined(PLLMR0_333_166_83) - -void board_pll_init_f(void) -{ - /* - * set PLL clocks based on input sysclk is 33M - * - * ---------------------------------- - * | CLK | FREQ (MHz) | DIV RATIO | - * ---------------------------------- - * | CPU | 333.33 | 2 | - * | PLB | 166.66 | 4 (0x04)| - * | OPB | 83.33 | 8 (0x08)| - * | EBC | 83.33 | 8 (0x08)| - * | SPI | 83.33 | 8 (0x08)| - * | UART0 | 16.66 | 5 (0x05)| - * | UART1 | 16.66 | 5 (0x05)| - * | DAC | ???? | 166 (0xA6)| - * | ADC | ???? | 166 (0xA6)| - * | PWM | 41.66 | 3 (0x03)| - * | EMAC | ???? | 3 (0x03)| - * ----------------------------------- - */ - - /* Initialize PLL */ - mtcpr(CPR0_PLLC, 0x0000033C); - mtcpr(CPR0_PLLD, 0x0a010000); - mtcpr(CPR0_PRIMAD, 0x02040808); - mtcpr(CPR0_PERD0, 0x02080505); /* SPI clk div. eq. OPB clk div. */ - mtcpr(CPR0_PERD1, 0xA6A60300); - mtcpr(CPR0_CLKUP, 0x40000000); -} - -#elif defined(PLLMR0_100_100_12) - -void board_pll_init_f(void) -{ - /* - * set PLL clocks based on input sysclk is 33M - * - * ---------------------- - * | CLK | FREQ (MHz) | - * ---------------------- - * | CPU | 100.00 | - * | PLB | 100.00 | - * | OPB | 12.00 | - * | EBC | 49.00 | - * ---------------------- - */ - - /* Initialize PLL */ - mtcpr(CPR0_PLLC, 0x000003BC); - mtcpr(CPR0_PLLD, 0x06060600); - mtcpr(CPR0_PRIMAD, 0x02020004); - mtcpr(CPR0_PERD0, 0x04002828); /* SPI clk div. eq. OPB clk div. */ - mtcpr(CPR0_PERD1, 0xC8C81600); - mtcpr(CPR0_CLKUP, 0x40000000); -} -#endif /* CPU_<speed>_405EZ */ diff --git a/board/amcc/bamboo/Kconfig b/board/amcc/bamboo/Kconfig deleted file mode 100644 index c0bd40a..0000000 --- a/board/amcc/bamboo/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_BAMBOO - -config SYS_BOARD - default "bamboo" - -config SYS_VENDOR - default "amcc" - -config SYS_CONFIG_NAME - default "bamboo" - -endif diff --git a/board/amcc/bamboo/MAINTAINERS b/board/amcc/bamboo/MAINTAINERS deleted file mode 100644 index 4c8929e..0000000 --- a/board/amcc/bamboo/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -BAMBOO BOARD -M: Stefan Roese <sr(a)denx.de> -S: Maintained -F: board/amcc/bamboo/ -F: include/configs/bamboo.h -F: configs/bamboo_defconfig diff --git a/board/amcc/bamboo/Makefile b/board/amcc/bamboo/Makefile deleted file mode 100644 index 4c0a125..0000000 --- a/board/amcc/bamboo/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2002-2007 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = bamboo.o flash.o -extra-y += init.o diff --git a/board/amcc/bamboo/README b/board/amcc/bamboo/README deleted file mode 100644 index e139c6d..0000000 --- a/board/amcc/bamboo/README +++ /dev/null @@ -1,77 +0,0 @@ -The 2 important dipswitches are configured as shown below: - -SW1 (for 33MHz SysClk) ----------------------- -S1 S2 S3 S4 S5 S6 S7 S8 -OFF OFF OFF OFF OFF OFF OFF ON - -SW7 (for Op-Code Flash and Boot Option H) ------------------------------------------ -S1 S2 S3 S4 S5 S6 S7 S8 -OFF OFF OFF ON OFF OFF OFF OFF - -The EEPROM at location 0x52 is loaded with these 16 bytes: -C47042A6 05D7A190 40082350 0d050000 - -SDR0_SDSTP0[ENG]: 1 : PLL's VCO is the source for PLL forward divisors -SDR0_SDSTP0[SRC]: 1 : Feedback originates from PLLOUTB -SDR0_SDSTP0[SEL]: 0 : Feedback selection is PLL output -SDR0_SDSTP0[TUNE]: 1000111000 : 10 <= M <= 22, 600MHz < VCO <= 900MHz -SDR0_SDSTP0[FBDV]: 4 : PLL feedback divisor -SDR0_SDSTP0[FBDVA]: 2 : PLL forward divisor A -SDR0_SDSTP0[FBDVB]: 5 : PLL forward divisor B -SDR0_SDSTP0[PRBDV0]: 1 : PLL primary divisor B -SDR0_SDSTP0[OPBDV0]: 2 : OPB clock divisor -SDR0_SDSTP0[LFBDV]: 1 : PLL local feedback divisor -SDR0_SDSTP0[PERDV0]: 3 : Peripheral clock divisor 0 -SDR0_SDSTP0[MALDV0]: 2 : MAL clock divisor 0 -SDR0_SDSTP0[PCIDV0]: 2 : Sync PCI clock divisor 0 -SDR0_SDSTP0[PLLTIMER]: 7 : PLL locking timer -SDR0_SDSTP0[RW]: 1 : EBC ROM width: 16-bit -SDR0_SDSTP0[RL]: 0 : EBC ROM location: EBC -SDR0_SDSTP0[PAE]: 0 : PCI internal arbiter: disabled -SDR0_SDSTP0[PHCE]: 0 : PCI host configuration: disabled -SDR0_SDSTP0[ZM]: 3 : ZMII mode: RMII mode 100 -SDR0_SDSTP0[CTE]: 0 : CPU trace: disabled -SDR0_SDSTP0[Nto1]: 0 : CPU/PLB ratio N/P: not N to 1 -SDR0_SDSTP0[PAME]: 1 : PCI asynchronous mode: enabled -SDR0_SDSTP0[MEM]: 1 : Multiplex: EMAC -SDR0_SDSTP0[NE]: 0 : NDFC: disabled -SDR0_SDSTP0[NBW]: 0 : NDFC boot width: 8-bit -SDR0_SDSTP0[NBW]: 0 : NDFC boot page selection -SDR0_SDSTP0[NBAC]: 0 : NDFC boot address selection cycle: 3 Addr. Cycles, 1 Col. + 2 Row (512 page size) -SDR0_SDSTP0[NARE]: 0 : NDFC auto read : disabled -SDR0_SDSTP0[NRB]: 0 : NDFC Ready/Busy : Ready -SDR0_SDSTP0[NDRSC]: 33333 : NDFC device reset counter -SDR0_SDSTP0[NCG0]: 0 : NDFC/EBC chip select gating CS0 : EBC -SDR0_SDSTP0[NCG1]: 0 : NDFC/EBC chip select gating CS1 : EBC -SDR0_SDSTP0[NCG2]: 0 : NDFC/EBC chip select gating CS2 : EBC -SDR0_SDSTP0[NCG3]: 0 : NDFC/EBC chip select gating CS3 : EBC -SDR0_SDSTP0[NCRDC]: 3333 : NDFC device read count - -PPC440EP Clocking Configuration - -SysClk is 33.0MHz, M is 20, VCO is 660.0MHz, CPU is 330.0MHz, PLB is 132.0MHz -OPB is 66.0MHz, EBC is 44.0MHz, MAL is 66.0MHz, Sync PCI is 66.0MHz - -The above information is reported by Eugene O'Brien -<Eugene.O'Brien(a)advantechamt.com>. Thanks a lot. - -2007-08-06, Stefan Roese <sr(a)denx.de> ---------------------------------------------------------------------- - -The configuration for the AMCC 440EP eval board "Bamboo" was changed -to only use 384 kbytes of FLASH for the U-Boot image. This way the -redundant environment can be saved in the remaining 2 sectors of the -same flash chip. - -Caution: With an upgrade from an earlier U-Boot version the current -environment will be erased since the environment is now saved in -different sectors. By using the following command the environment can -be saved after upgrading the U-Boot image and *before* resetting the -board: - -setenv recover_env 'prot off FFF80000 FFF9FFFF;era FFF80000 FFF9FFFF;' \ - 'cp.b FFF60000 FFF80000 20000' - -2006-07-27, Stefan Roese <sr(a)denx.de> diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c deleted file mode 100644 index c8d0963..0000000 --- a/board/amcc/bamboo/bamboo.c +++ /dev/null @@ -1,1896 +0,0 @@ -/* - * (C) Copyright 2005-2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/processor.h> -#include <asm/ppc4xx-gpio.h> -#include <spd_sdram.h> -#include <asm/ppc440.h> -#include "bamboo.h" - -void ext_bus_cntlr_init(void); -void configure_ppc440ep_pins(void); -int is_nand_selected(void); - -/************************************************************************* - * - * Bamboo has one bank onboard sdram (plus DIMM) - * - * Fixed memory is composed of : - * MT46V16M16TG-75 from Micron (x 2), 256Mb, 16 M x16, DDR266, - * 13 row add bits, 10 column add bits (but 12 row used only). - * ECC device: MT46V16M8TG-75 from Micron (x 1), 128Mb, x8, DDR266, - * 12 row add bits, 10 column add bits. - * Prepare a subset (only the used ones) of SPD data - * - * Note : if the ECC is enabled (SDRAM_ECC_ENABLE) the size of - * the corresponding bank is divided by 2 due to number of Row addresses - * 12 in the ECC module - * - * Assumes: 64 MB, ECC, non-registered - * PLB @ 133 MHz - * - ************************************************************************/ -const unsigned char cfg_simulate_spd_eeprom[128] = { - 0x80, /* number of SPD bytes used: 128 */ - 0x08, /* total number bytes in SPD device = 256 */ - 0x07, /* DDR ram */ -#ifdef CONFIG_DDR_ECC - 0x0C, /* num Row Addr: 12 */ -#else - 0x0D, /* num Row Addr: 13 */ -#endif - 0x09, /* numColAddr: 9 */ - 0x01, /* numBanks: 1 */ - 0x20, /* Module data width: 32 bits */ - 0x00, /* Module data width continued: +0 */ - 0x04, /* 2.5 Volt */ - 0x75, /* SDRAM Cycle Time (cas latency 2.5) = 7.5 ns */ - 0x00, /* SDRAM Access from clock */ -#ifdef CONFIG_DDR_ECC - 0x02, /* ECC ON : 02 OFF : 00 */ -#else - 0x00, /* ECC ON : 02 OFF : 00 */ -#endif - 0x82, /* refresh Rate Type: Normal (7.8us) + Self refresh */ - 0, - 0, - 0x01, /* wcsbc = 1 */ - 0, - 0, - 0x0C, /* casBit (2,2.5) */ - 0, - 0, - 0x00, /* not registered: 0 registered : 0x02*/ - 0, - 0xA0, /* SDRAM Cycle Time (cas latency 2) = 10 ns */ - 0, - 0x00, /* SDRAM Cycle Time (cas latency 1.5) = N.A */ - 0, - 0x50, /* tRpNs = 20 ns */ - 0, - 0x50, /* tRcdNs = 20 ns */ - 45, /* tRasNs */ -#ifdef CONFIG_DDR_ECC - 0x08, /* bankSizeID: 32MB */ -#else - 0x10, /* bankSizeID: 64MB */ -#endif - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0 -}; - -#if 0 -{ /* GPIO Alternate1 Alternate2 Alternate3 */ - { - /* GPIO Core 0 */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_0 -> EBC_ADDR(7) DMA_REQ(2) */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_1 -> EBC_ADDR(6) DMA_ACK(2) */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_2 -> EBC_ADDR(5) DMA_EOT/TC(2) */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_3 -> EBC_ADDR(4) DMA_REQ(3) */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_4 -> EBC_ADDR(3) DMA_ACK(3) */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_5 ................. */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_6 -> EBC_CS_N(1) */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_7 -> EBC_CS_N(2) */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_8 -> EBC_CS_N(3) */ - { GPIO0_BASE, GPIO_DIS, GPIO_ALT1 }, /* GPIO0_9 -> EBC_CS_N(4) */ - { GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO0_10 -> EBC_CS_N(5) */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_11 -> EBC_BUS_ERR */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_12 -> ZII_p0Rxd(0) */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_13 -> ZII_p0Rxd(1) */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_14 -> ZII_p0Rxd(2) */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_15 -> ZII_p0Rxd(3) */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_16 -> ZII_p0Txd(0) */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_17 -> ZII_p0Txd(1) */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_18 -> ZII_p0Txd(2) */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_19 -> ZII_p0Txd(3) */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_20 -> ZII_p0Rx_er */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_21 -> ZII_p0Rx_dv */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_22 -> ZII_p0RxCrs */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_23 -> ZII_p0Tx_er */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_24 -> ZII_p0Tx_en */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_25 -> ZII_p0Col */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_26 -> USB2D_RXVALID */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_27 -> EXT_EBC_REQ USB2D_RXERROR */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_28 -> USB2D_TXVALID */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_29 -> EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_30 -> EBC_EXT_ACK USB2D_XCVRSELECT */ - { GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_31 -> EBC_EXR_BUSREQ USB2D_TERMSELECT */ - }, - { - /* GPIO Core 1 */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_0 -> USB2D_OPMODE0 */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_1 -> USB2D_OPMODE1 */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_2 -> UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_3 -> UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_4 -> UART0_8PIN_CTS_N UART3_SIN */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_5 -> UART0_RTS_N */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_6 -> UART0_DTR_N UART1_SOUT */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_7 -> UART0_RI_N UART1_SIN */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_8 -> UIC_IRQ(0) */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_9 -> UIC_IRQ(1) */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_10 -> UIC_IRQ(2) */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_11 -> UIC_IRQ(3) */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_12 -> UIC_IRQ(4) DMA_ACK(1) */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_13 -> UIC_IRQ(6) DMA_EOT/TC(1) */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_14 -> UIC_IRQ(7) DMA_REQ(0) */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_15 -> UIC_IRQ(8) DMA_ACK(0) */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_16 -> UIC_IRQ(9) DMA_EOT/TC(0) */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_17 -> - */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_18 -> | */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_19 -> | */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_20 -> | */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_21 -> | */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_22 -> | */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_23 -> \ Can be unselected thru TraceSelect Bit */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_24 -> / in PowerPC440EP Chip */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_25 -> | */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_26 -> | */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_27 -> | */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_28 -> | */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_29 -> | */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_30 -> | */ - { GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_31 -> - */ - } -}; -#endif - -/*----------------------------------------------------------------------------+ - | EBC Devices Characteristics - | Peripheral Bank Access Parameters - EBC0_BnAP - | Peripheral Bank Configuration Register - EBC0_BnCR - +----------------------------------------------------------------------------*/ -/* Small Flash */ -#define EBC0_BNAP_SMALL_FLASH \ - EBC0_BNAP_BME_DISABLED | \ - EBC0_BNAP_TWT_ENCODE(6) | \ - EBC0_BNAP_CSN_ENCODE(0) | \ - EBC0_BNAP_OEN_ENCODE(1) | \ - EBC0_BNAP_WBN_ENCODE(1) | \ - EBC0_BNAP_WBF_ENCODE(3) | \ - EBC0_BNAP_TH_ENCODE(1) | \ - EBC0_BNAP_RE_ENABLED | \ - EBC0_BNAP_SOR_DELAYED | \ - EBC0_BNAP_BEM_WRITEONLY | \ - EBC0_BNAP_PEN_DISABLED - -#define EBC0_BNCR_SMALL_FLASH_CS0 \ - EBC0_BNCR_BAS_ENCODE(0xFFF00000) | \ - EBC0_BNCR_BS_1MB | \ - EBC0_BNCR_BU_RW | \ - EBC0_BNCR_BW_8BIT - -#define EBC0_BNCR_SMALL_FLASH_CS4 \ - EBC0_BNCR_BAS_ENCODE(0x87F00000) | \ - EBC0_BNCR_BS_1MB | \ - EBC0_BNCR_BU_RW | \ - EBC0_BNCR_BW_8BIT - -/* Large Flash or SRAM */ -#define EBC0_BNAP_LARGE_FLASH_OR_SRAM \ - EBC0_BNAP_BME_DISABLED | \ - EBC0_BNAP_TWT_ENCODE(8) | \ - EBC0_BNAP_CSN_ENCODE(0) | \ - EBC0_BNAP_OEN_ENCODE(1) | \ - EBC0_BNAP_WBN_ENCODE(1) | \ - EBC0_BNAP_WBF_ENCODE(1) | \ - EBC0_BNAP_TH_ENCODE(2) | \ - EBC0_BNAP_SOR_DELAYED | \ - EBC0_BNAP_BEM_RW | \ - EBC0_BNAP_PEN_DISABLED - -#define EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS0 \ - EBC0_BNCR_BAS_ENCODE(0xFF800000) | \ - EBC0_BNCR_BS_8MB | \ - EBC0_BNCR_BU_RW | \ - EBC0_BNCR_BW_16BIT - - -#define EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS4 \ - EBC0_BNCR_BAS_ENCODE(0x87800000) | \ - EBC0_BNCR_BS_8MB | \ - EBC0_BNCR_BU_RW | \ - EBC0_BNCR_BW_16BIT - -/* NVRAM - FPGA */ -#define EBC0_BNAP_NVRAM_FPGA \ - EBC0_BNAP_BME_DISABLED | \ - EBC0_BNAP_TWT_ENCODE(9) | \ - EBC0_BNAP_CSN_ENCODE(0) | \ - EBC0_BNAP_OEN_ENCODE(1) | \ - EBC0_BNAP_WBN_ENCODE(1) | \ - EBC0_BNAP_WBF_ENCODE(0) | \ - EBC0_BNAP_TH_ENCODE(2) | \ - EBC0_BNAP_RE_ENABLED | \ - EBC0_BNAP_SOR_DELAYED | \ - EBC0_BNAP_BEM_WRITEONLY | \ - EBC0_BNAP_PEN_DISABLED - -#define EBC0_BNCR_NVRAM_FPGA_CS5 \ - EBC0_BNCR_BAS_ENCODE(0x80000000) | \ - EBC0_BNCR_BS_1MB | \ - EBC0_BNCR_BU_RW | \ - EBC0_BNCR_BW_8BIT - -/* Nand Flash */ -#define EBC0_BNAP_NAND_FLASH \ - EBC0_BNAP_BME_DISABLED | \ - EBC0_BNAP_TWT_ENCODE(3) | \ - EBC0_BNAP_CSN_ENCODE(0) | \ - EBC0_BNAP_OEN_ENCODE(0) | \ - EBC0_BNAP_WBN_ENCODE(0) | \ - EBC0_BNAP_WBF_ENCODE(0) | \ - EBC0_BNAP_TH_ENCODE(1) | \ - EBC0_BNAP_RE_ENABLED | \ - EBC0_BNAP_SOR_NOT_DELAYED | \ - EBC0_BNAP_BEM_RW | \ - EBC0_BNAP_PEN_DISABLED - - -#define EBC0_BNCR_NAND_FLASH_CS0 0xB8400000 - -/* NAND0 */ -#define EBC0_BNCR_NAND_FLASH_CS1 \ - EBC0_BNCR_BAS_ENCODE(0x90000000) | \ - EBC0_BNCR_BS_1MB | \ - EBC0_BNCR_BU_RW | \ - EBC0_BNCR_BW_32BIT -/* NAND1 - Bank2 */ -#define EBC0_BNCR_NAND_FLASH_CS2 \ - EBC0_BNCR_BAS_ENCODE(0x94000000) | \ - EBC0_BNCR_BS_1MB | \ - EBC0_BNCR_BU_RW | \ - EBC0_BNCR_BW_32BIT - -/* NAND1 - Bank3 */ -#define EBC0_BNCR_NAND_FLASH_CS3 \ - EBC0_BNCR_BAS_ENCODE(0x94000000) | \ - EBC0_BNCR_BS_1MB | \ - EBC0_BNCR_BU_RW | \ - EBC0_BNCR_BW_32BIT - -int board_early_init_f(void) -{ - ext_bus_cntlr_init(); - - /*-------------------------------------------------------------------- - * Setup the interrupt controller polarities, triggers, etc. - *-------------------------------------------------------------------*/ - mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(UIC0ER, 0x00000000); /* disable all */ - mtdcr(UIC0CR, 0x00000009); /* ATI & UIC1 crit are critical */ - mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */ - mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */ - mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(UIC0SR, 0xffffffff); /* clear all */ - - mtdcr(UIC1SR, 0xffffffff); /* clear all */ - mtdcr(UIC1ER, 0x00000000); /* disable all */ - mtdcr(UIC1CR, 0x00000000); /* all non-critical */ - mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */ - mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */ - mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(UIC1SR, 0xffffffff); /* clear all */ - - /*-------------------------------------------------------------------- - * Setup the GPIO pins - *-------------------------------------------------------------------*/ - out32(GPIO0_OSRL, 0x00000400); - out32(GPIO0_OSRH, 0x00000000); - out32(GPIO0_TSRL, 0x00000400); - out32(GPIO0_TSRH, 0x00000000); - out32(GPIO0_ISR1L, 0x00000000); - out32(GPIO0_ISR1H, 0x00000000); - out32(GPIO0_ISR2L, 0x00000000); - out32(GPIO0_ISR2H, 0x00000000); - out32(GPIO0_ISR3L, 0x00000000); - out32(GPIO0_ISR3H, 0x00000000); - - out32(GPIO1_OSRL, 0x0C380000); - out32(GPIO1_OSRH, 0x00000000); - out32(GPIO1_TSRL, 0x0C380000); - out32(GPIO1_TSRH, 0x00000000); - out32(GPIO1_ISR1L, 0x0FC30000); - out32(GPIO1_ISR1H, 0x00000000); - out32(GPIO1_ISR2L, 0x0C010000); - out32(GPIO1_ISR2H, 0x00000000); - out32(GPIO1_ISR3L, 0x01400000); - out32(GPIO1_ISR3H, 0x00000000); - - configure_ppc440ep_pins(); - - return 0; -} - -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - printf("Board: Bamboo - AMCC PPC440EP Evaluation Board"); - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - return (0); -} - - -phys_size_t initdram (int board_type) -{ - long dram_size; - - dram_size = spd_sdram(); - - return dram_size; -} - -/*----------------------------------------------------------------------------+ - | is_powerpc440ep_pass1. - +----------------------------------------------------------------------------*/ -int is_powerpc440ep_pass1(void) -{ - unsigned long pvr; - - pvr = get_pvr(); - - if (pvr == PVR_POWERPC_440EP_PASS1) - return true; - else if (pvr == PVR_POWERPC_440EP_PASS2) - return false; - else { - printf("brdutil error 3\n"); - for (;;) - ; - } - - return false; -} - -/*----------------------------------------------------------------------------+ - | is_nand_selected. - +----------------------------------------------------------------------------*/ -int is_nand_selected(void) -{ -#ifdef CONFIG_BAMBOO_NAND - return true; -#else - return false; -#endif -} - -/*----------------------------------------------------------------------------+ - | config_on_ebc_cs4_is_small_flash => from EPLD - +----------------------------------------------------------------------------*/ -unsigned char config_on_ebc_cs4_is_small_flash(void) -{ - /* Not implemented yet => returns constant value */ - return true; -} - -/*----------------------------------------------------------------------------+ - | Ext_bus_cntlr_init. - | Initialize the external bus controller - +----------------------------------------------------------------------------*/ -void ext_bus_cntlr_init(void) -{ - unsigned long sdr0_pstrp0, sdr0_sdstp1; - unsigned long bootstrap_settings, boot_selection, ebc_boot_size; - int computed_boot_device = BOOT_DEVICE_UNKNOWN; - unsigned long ebc0_cs0_bnap_value = 0, ebc0_cs0_bncr_value = 0; - unsigned long ebc0_cs1_bnap_value = 0, ebc0_cs1_bncr_value = 0; - unsigned long ebc0_cs2_bnap_value = 0, ebc0_cs2_bncr_value = 0; - unsigned long ebc0_cs3_bnap_value = 0, ebc0_cs3_bncr_value = 0; - unsigned long ebc0_cs4_bnap_value = 0, ebc0_cs4_bncr_value = 0; - - - /*-------------------------------------------------------------------------+ - | - | PART 1 : Initialize EBC Bank 5 - | ============================== - | Bank5 is always associated to the NVRAM/EPLD. - | It has to be initialized prior to other banks settings computation since - | some board registers values may be needed - | - +-------------------------------------------------------------------------*/ - /* NVRAM - FPGA */ - mtebc(PB5AP, EBC0_BNAP_NVRAM_FPGA); - mtebc(PB5CR, EBC0_BNCR_NVRAM_FPGA_CS5); - - /*-------------------------------------------------------------------------+ - | - | PART 2 : Determine which boot device was selected - | ========================================= - | - | Read Pin Strap Register in PPC440EP - | In case of boot from IIC, read Serial Device Strap Register1 - | - | Result can either be : - | - Boot from EBC 8bits => SMALL FLASH - | - Boot from EBC 16bits => Large Flash or SRAM - | - Boot from NAND Flash - | - Boot from PCI - | - +-------------------------------------------------------------------------*/ - /* Read Pin Strap Register in PPC440EP */ - mfsdr(SDR0_PINSTP, sdr0_pstrp0); - bootstrap_settings = sdr0_pstrp0 & SDR0_PSTRP0_BOOTSTRAP_MASK; - - /*-------------------------------------------------------------------------+ - | PPC440EP Pass1 - +-------------------------------------------------------------------------*/ - if (is_powerpc440ep_pass1() == true) { - switch(bootstrap_settings) { - case SDR0_PSTRP0_BOOTSTRAP_SETTINGS0: - /* Default Strap Settings 0 : CPU 400 - PLB 133 - Boot EBC 8 bit 33MHz */ - /* Boot from Small Flash */ - computed_boot_device = BOOT_FROM_SMALL_FLASH; - break; - case SDR0_PSTRP0_BOOTSTRAP_SETTINGS1: - /* Default Strap Settings 1 : CPU 533 - PLB 133 - Boot PCI 66MHz */ - /* Boot from PCI */ - computed_boot_device = BOOT_FROM_PCI; - break; - - case SDR0_PSTRP0_BOOTSTRAP_SETTINGS2: - /* Default Strap Settings 2 : CPU 500 - PLB 100 - Boot NDFC16 66MHz */ - /* Boot from Nand Flash */ - computed_boot_device = BOOT_FROM_NAND_FLASH0; - break; - - case SDR0_PSTRP0_BOOTSTRAP_SETTINGS3: - /* Default Strap Settings 3 : CPU 333 - PLB 133 - Boot EBC 8 bit 66MHz */ - /* Boot from Small Flash */ - computed_boot_device = BOOT_FROM_SMALL_FLASH; - break; - - case SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN: - case SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN: - /* Boot Settings in IIC EEprom address 0xA8 or 0xA4 */ - /* Read Serial Device Strap Register1 in PPC440EP */ - mfsdr(SDR0_SDSTP1, sdr0_sdstp1); - boot_selection = sdr0_sdstp1 & SDR0_SDSTP1_BOOT_SEL_MASK; - ebc_boot_size = sdr0_sdstp1 & SDR0_SDSTP1_EBC_ROM_BS_MASK; - - switch(boot_selection) { - case SDR0_SDSTP1_BOOT_SEL_EBC: - switch(ebc_boot_size) { - case SDR0_SDSTP1_EBC_ROM_BS_16BIT: - computed_boot_device = BOOT_FROM_LARGE_FLASH_OR_SRAM; - break; - case SDR0_SDSTP1_EBC_ROM_BS_8BIT: - computed_boot_device = BOOT_FROM_SMALL_FLASH; - break; - } - break; - - case SDR0_SDSTP1_BOOT_SEL_PCI: - computed_boot_device = BOOT_FROM_PCI; - break; - - case SDR0_SDSTP1_BOOT_SEL_NDFC: - computed_boot_device = BOOT_FROM_NAND_FLASH0; - break; - } - break; - } - } - - /*-------------------------------------------------------------------------+ - | PPC440EP Pass2 - +-------------------------------------------------------------------------*/ - else { - switch(bootstrap_settings) { - case SDR0_PSTRP0_BOOTSTRAP_SETTINGS0: - /* Default Strap Settings 0 : CPU 400 - PLB 133 - Boot EBC 8 bit 33MHz */ - /* Boot from Small Flash */ - computed_boot_device = BOOT_FROM_SMALL_FLASH; - break; - case SDR0_PSTRP0_BOOTSTRAP_SETTINGS1: - /* Default Strap Settings 1 : CPU 333 - PLB 133 - Boot PCI 66MHz */ - /* Boot from PCI */ - computed_boot_device = BOOT_FROM_PCI; - break; - - case SDR0_PSTRP0_BOOTSTRAP_SETTINGS2: - /* Default Strap Settings 2 : CPU 400 - PLB 100 - Boot NDFC16 33MHz */ - /* Boot from Nand Flash */ - computed_boot_device = BOOT_FROM_NAND_FLASH0; - break; - - case SDR0_PSTRP0_BOOTSTRAP_SETTINGS3: - /* Default Strap Settings 3 : CPU 400 - PLB 100 - Boot EBC 16 bit 33MHz */ - /* Boot from Large Flash or SRAM */ - computed_boot_device = BOOT_FROM_LARGE_FLASH_OR_SRAM; - break; - - case SDR0_PSTRP0_BOOTSTRAP_SETTINGS4: - /* Default Strap Settings 4 : CPU 333 - PLB 133 - Boot EBC 16 bit 66MHz */ - /* Boot from Large Flash or SRAM */ - computed_boot_device = BOOT_FROM_LARGE_FLASH_OR_SRAM; - break; - - case SDR0_PSTRP0_BOOTSTRAP_SETTINGS6: - /* Default Strap Settings 6 : CPU 400 - PLB 100 - Boot PCI 33MHz */ - /* Boot from PCI */ - computed_boot_device = BOOT_FROM_PCI; - break; - - case SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN: - case SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN: - /* Default Strap Settings 5-7 */ - /* Boot Settings in IIC EEprom address 0xA8 or 0xA4 */ - /* Read Serial Device Strap Register1 in PPC440EP */ - mfsdr(SDR0_SDSTP1, sdr0_sdstp1); - boot_selection = sdr0_sdstp1 & SDR0_SDSTP1_BOOT_SEL_MASK; - ebc_boot_size = sdr0_sdstp1 & SDR0_SDSTP1_EBC_ROM_BS_MASK; - - switch(boot_selection) { - case SDR0_SDSTP1_BOOT_SEL_EBC: - switch(ebc_boot_size) { - case SDR0_SDSTP1_EBC_ROM_BS_16BIT: - computed_boot_device = BOOT_FROM_LARGE_FLASH_OR_SRAM; - break; - case SDR0_SDSTP1_EBC_ROM_BS_8BIT: - computed_boot_device = BOOT_FROM_SMALL_FLASH; - break; - } - break; - - case SDR0_SDSTP1_BOOT_SEL_PCI: - computed_boot_device = BOOT_FROM_PCI; - break; - - case SDR0_SDSTP1_BOOT_SEL_NDFC: - computed_boot_device = BOOT_FROM_NAND_FLASH0; - break; - } - break; - } - } - - /*-------------------------------------------------------------------------+ - | - | PART 3 : Compute EBC settings depending on selected boot device - | ====== ====================================================== - | - | Resulting EBC init will be among following configurations : - | - | - Boot from EBC 8bits => boot from SMALL FLASH selected - | EBC-CS0 = Small Flash - | EBC-CS1,2,3 = NAND Flash or - | Exp.Slot depending on Soft Config - | EBC-CS4 = SRAM/Large Flash or - | Large Flash/SRAM depending on jumpers - | EBC-CS5 = NVRAM / EPLD - | - | - Boot from EBC 16bits => boot from Large Flash or SRAM selected - | EBC-CS0 = SRAM/Large Flash or - | Large Flash/SRAM depending on jumpers - | EBC-CS1,2,3 = NAND Flash or - | Exp.Slot depending on Software Configuration - | EBC-CS4 = Small Flash - | EBC-CS5 = NVRAM / EPLD - | - | - Boot from NAND Flash - | EBC-CS0 = NAND Flash0 - | EBC-CS1,2,3 = NAND Flash1 - | EBC-CS4 = SRAM/Large Flash or - | Large Flash/SRAM depending on jumpers - | EBC-CS5 = NVRAM / EPLD - | - | - Boot from PCI - | EBC-CS0 = ... - | EBC-CS1,2,3 = NAND Flash or - | Exp.Slot depending on Software Configuration - | EBC-CS4 = SRAM/Large Flash or - | Large Flash/SRAM or - | Small Flash depending on jumpers - | EBC-CS5 = NVRAM / EPLD - | - +-------------------------------------------------------------------------*/ - - switch(computed_boot_device) { - /*------------------------------------------------------------------------- */ - case BOOT_FROM_SMALL_FLASH: - /*------------------------------------------------------------------------- */ - ebc0_cs0_bnap_value = EBC0_BNAP_SMALL_FLASH; - ebc0_cs0_bncr_value = EBC0_BNCR_SMALL_FLASH_CS0; - if ((is_nand_selected()) == true) { - /* NAND Flash */ - ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH; - ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1; - ebc0_cs2_bnap_value = EBC0_BNAP_NAND_FLASH; - ebc0_cs2_bncr_value = EBC0_BNCR_NAND_FLASH_CS2; - ebc0_cs3_bnap_value = 0; - ebc0_cs3_bncr_value = 0; - } else { - /* Expansion Slot */ - ebc0_cs1_bnap_value = 0; - ebc0_cs1_bncr_value = 0; - ebc0_cs2_bnap_value = 0; - ebc0_cs2_bncr_value = 0; - ebc0_cs3_bnap_value = 0; - ebc0_cs3_bncr_value = 0; - } - ebc0_cs4_bnap_value = EBC0_BNAP_LARGE_FLASH_OR_SRAM; - ebc0_cs4_bncr_value = EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS4; - - break; - - /*------------------------------------------------------------------------- */ - case BOOT_FROM_LARGE_FLASH_OR_SRAM: - /*------------------------------------------------------------------------- */ - ebc0_cs0_bnap_value = EBC0_BNAP_LARGE_FLASH_OR_SRAM; - ebc0_cs0_bncr_value = EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS0; - if ((is_nand_selected()) == true) { - /* NAND Flash */ - ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH; - ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1; - ebc0_cs2_bnap_value = 0; - ebc0_cs2_bncr_value = 0; - ebc0_cs3_bnap_value = 0; - ebc0_cs3_bncr_value = 0; - } else { - /* Expansion Slot */ - ebc0_cs1_bnap_value = 0; - ebc0_cs1_bncr_value = 0; - ebc0_cs2_bnap_value = 0; - ebc0_cs2_bncr_value = 0; - ebc0_cs3_bnap_value = 0; - ebc0_cs3_bncr_value = 0; - } - ebc0_cs4_bnap_value = EBC0_BNAP_SMALL_FLASH; - ebc0_cs4_bncr_value = EBC0_BNCR_SMALL_FLASH_CS4; - - break; - - /*------------------------------------------------------------------------- */ - case BOOT_FROM_NAND_FLASH0: - /*------------------------------------------------------------------------- */ - ebc0_cs0_bnap_value = EBC0_BNAP_NAND_FLASH; - ebc0_cs0_bncr_value = EBC0_BNCR_NAND_FLASH_CS1; - - ebc0_cs1_bnap_value = 0; - ebc0_cs1_bncr_value = 0; - ebc0_cs2_bnap_value = 0; - ebc0_cs2_bncr_value = 0; - ebc0_cs3_bnap_value = 0; - ebc0_cs3_bncr_value = 0; - - /* Large Flash or SRAM */ - ebc0_cs4_bnap_value = EBC0_BNAP_LARGE_FLASH_OR_SRAM; - ebc0_cs4_bncr_value = EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS4; - - break; - - /*------------------------------------------------------------------------- */ - case BOOT_FROM_PCI: - /*------------------------------------------------------------------------- */ - ebc0_cs0_bnap_value = 0; - ebc0_cs0_bncr_value = 0; - - if ((is_nand_selected()) == true) { - /* NAND Flash */ - ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH; - ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1; - ebc0_cs2_bnap_value = 0; - ebc0_cs2_bncr_value = 0; - ebc0_cs3_bnap_value = 0; - ebc0_cs3_bncr_value = 0; - } else { - /* Expansion Slot */ - ebc0_cs1_bnap_value = 0; - ebc0_cs1_bncr_value = 0; - ebc0_cs2_bnap_value = 0; - ebc0_cs2_bncr_value = 0; - ebc0_cs3_bnap_value = 0; - ebc0_cs3_bncr_value = 0; - } - - if ((config_on_ebc_cs4_is_small_flash()) == true) { - /* Small Flash */ - ebc0_cs4_bnap_value = EBC0_BNAP_SMALL_FLASH; - ebc0_cs4_bncr_value = EBC0_BNCR_SMALL_FLASH_CS4; - } else { - /* Large Flash or SRAM */ - ebc0_cs4_bnap_value = EBC0_BNAP_LARGE_FLASH_OR_SRAM; - ebc0_cs4_bncr_value = EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS4; - } - - break; - - /*------------------------------------------------------------------------- */ - case BOOT_DEVICE_UNKNOWN: - /*------------------------------------------------------------------------- */ - /* Error */ - break; - - } - - - /*-------------------------------------------------------------------------+ - | Initialize EBC CONFIG - +-------------------------------------------------------------------------*/ - mtdcr(EBC0_CFGADDR, EBC0_CFG); - mtdcr(EBC0_CFGDATA, EBC0_CFG_EBTC_DRIVEN | - EBC0_CFG_PTD_ENABLED | - EBC0_CFG_RTC_2048PERCLK | - EBC0_CFG_EMPL_LOW | - EBC0_CFG_EMPH_LOW | - EBC0_CFG_CSTC_DRIVEN | - EBC0_CFG_BPF_ONEDW | - EBC0_CFG_EMS_8BIT | - EBC0_CFG_PME_DISABLED | - EBC0_CFG_PMT_ENCODE(0) ); - - /*-------------------------------------------------------------------------+ - | Initialize EBC Bank 0-4 - +-------------------------------------------------------------------------*/ - /* EBC Bank0 */ - mtebc(PB0AP, ebc0_cs0_bnap_value); - mtebc(PB0CR, ebc0_cs0_bncr_value); - /* EBC Bank1 */ - mtebc(PB1AP, ebc0_cs1_bnap_value); - mtebc(PB1CR, ebc0_cs1_bncr_value); - /* EBC Bank2 */ - mtebc(PB2AP, ebc0_cs2_bnap_value); - mtebc(PB2CR, ebc0_cs2_bncr_value); - /* EBC Bank3 */ - mtebc(PB3AP, ebc0_cs3_bnap_value); - mtebc(PB3CR, ebc0_cs3_bncr_value); - /* EBC Bank4 */ - mtebc(PB4AP, ebc0_cs4_bnap_value); - mtebc(PB4CR, ebc0_cs4_bncr_value); - - return; -} - - -/*----------------------------------------------------------------------------+ - | get_uart_configuration. - +----------------------------------------------------------------------------*/ -uart_config_nb_t get_uart_configuration(void) -{ - return (L4); -} - -/*----------------------------------------------------------------------------+ - | set_phy_configuration_through_fpga => to EPLD - +----------------------------------------------------------------------------*/ -void set_phy_configuration_through_fpga(zmii_config_t config) -{ - - unsigned long fpga_selection_reg; - - fpga_selection_reg = in8(FPGA_SELECTION_1_REG) & ~FPGA_SEL_1_REG_PHY_MASK; - - switch(config) - { - case ZMII_CONFIGURATION_IS_MII: - fpga_selection_reg = fpga_selection_reg | FPGA_SEL_1_REG_MII; - break; - case ZMII_CONFIGURATION_IS_RMII: - fpga_selection_reg = fpga_selection_reg | FPGA_SEL_1_REG_RMII; - break; - case ZMII_CONFIGURATION_IS_SMII: - fpga_selection_reg = fpga_selection_reg | FPGA_SEL_1_REG_SMII; - break; - case ZMII_CONFIGURATION_UNKNOWN: - default: - break; - } - out8(FPGA_SELECTION_1_REG,fpga_selection_reg); - -} - -/*----------------------------------------------------------------------------+ - | scp_selection_in_fpga. - +----------------------------------------------------------------------------*/ -void scp_selection_in_fpga(void) -{ - unsigned long fpga_selection_2_reg; - - fpga_selection_2_reg = in8(FPGA_SELECTION_2_REG) & ~FPGA_SEL2_REG_IIC1_SCP_SEL_MASK; - fpga_selection_2_reg |= FPGA_SEL2_REG_SEL_SCP; - out8(FPGA_SELECTION_2_REG,fpga_selection_2_reg); -} - -/*----------------------------------------------------------------------------+ - | iic1_selection_in_fpga. - +----------------------------------------------------------------------------*/ -void iic1_selection_in_fpga(void) -{ - unsigned long fpga_selection_2_reg; - - fpga_selection_2_reg = in8(FPGA_SELECTION_2_REG) & ~FPGA_SEL2_REG_IIC1_SCP_SEL_MASK; - fpga_selection_2_reg |= FPGA_SEL2_REG_SEL_IIC1; - out8(FPGA_SELECTION_2_REG,fpga_selection_2_reg); -} - -/*----------------------------------------------------------------------------+ - | dma_a_b_selection_in_fpga. - +----------------------------------------------------------------------------*/ -void dma_a_b_selection_in_fpga(void) -{ - unsigned long fpga_selection_2_reg; - - fpga_selection_2_reg = in8(FPGA_SELECTION_2_REG) | FPGA_SEL2_REG_SEL_DMA_A_B; - out8(FPGA_SELECTION_2_REG,fpga_selection_2_reg); -} - -/*----------------------------------------------------------------------------+ - | dma_a_b_unselect_in_fpga. - +----------------------------------------------------------------------------*/ -void dma_a_b_unselect_in_fpga(void) -{ - unsigned long fpga_selection_2_reg; - - fpga_selection_2_reg = in8(FPGA_SELECTION_2_REG) & ~FPGA_SEL2_REG_SEL_DMA_A_B; - out8(FPGA_SELECTION_2_REG,fpga_selection_2_reg); -} - -/*----------------------------------------------------------------------------+ - | dma_c_d_selection_in_fpga. - +----------------------------------------------------------------------------*/ -void dma_c_d_selection_in_fpga(void) -{ - unsigned long fpga_selection_2_reg; - - fpga_selection_2_reg = in8(FPGA_SELECTION_2_REG) | FPGA_SEL2_REG_SEL_DMA_C_D; - out8(FPGA_SELECTION_2_REG,fpga_selection_2_reg); -} - -/*----------------------------------------------------------------------------+ - | dma_c_d_unselect_in_fpga. - +----------------------------------------------------------------------------*/ -void dma_c_d_unselect_in_fpga(void) -{ - unsigned long fpga_selection_2_reg; - - fpga_selection_2_reg = in8(FPGA_SELECTION_2_REG) & ~FPGA_SEL2_REG_SEL_DMA_C_D; - out8(FPGA_SELECTION_2_REG,fpga_selection_2_reg); -} - -/*----------------------------------------------------------------------------+ - | usb2_device_selection_in_fpga. - +----------------------------------------------------------------------------*/ -void usb2_device_selection_in_fpga(void) -{ - unsigned long fpga_selection_1_reg; - - fpga_selection_1_reg = in8(FPGA_SELECTION_1_REG) | FPGA_SEL_1_REG_USB2_DEV_SEL; - out8(FPGA_SELECTION_1_REG,fpga_selection_1_reg); -} - -/*----------------------------------------------------------------------------+ - | usb2_device_reset_through_fpga. - +----------------------------------------------------------------------------*/ -void usb2_device_reset_through_fpga(void) -{ - /* Perform soft Reset pulse */ - unsigned long fpga_reset_reg; - int i; - - fpga_reset_reg = in8(FPGA_RESET_REG); - out8(FPGA_RESET_REG,fpga_reset_reg | FPGA_RESET_REG_RESET_USB20_DEV); - for (i=0; i<500; i++) - udelay(1000); - out8(FPGA_RESET_REG,fpga_reset_reg); -} - -/*----------------------------------------------------------------------------+ - | usb2_host_selection_in_fpga. - +----------------------------------------------------------------------------*/ -void usb2_host_selection_in_fpga(void) -{ - unsigned long fpga_selection_1_reg; - - fpga_selection_1_reg = in8(FPGA_SELECTION_1_REG) | FPGA_SEL_1_REG_USB2_HOST_SEL; - out8(FPGA_SELECTION_1_REG,fpga_selection_1_reg); -} - -/*----------------------------------------------------------------------------+ - | ndfc_selection_in_fpga. - +----------------------------------------------------------------------------*/ -void ndfc_selection_in_fpga(void) -{ - unsigned long fpga_selection_1_reg; - - fpga_selection_1_reg = in8(FPGA_SELECTION_1_REG) &~FPGA_SEL_1_REG_NF_SELEC_MASK; - fpga_selection_1_reg |= FPGA_SEL_1_REG_NF0_SEL_BY_NFCS1; - fpga_selection_1_reg |= FPGA_SEL_1_REG_NF1_SEL_BY_NFCS2; - out8(FPGA_SELECTION_1_REG,fpga_selection_1_reg); -} - -/*----------------------------------------------------------------------------+ - | uart_selection_in_fpga. - +----------------------------------------------------------------------------*/ -void uart_selection_in_fpga(uart_config_nb_t uart_config) -{ - /* FPGA register */ - unsigned char fpga_selection_3_reg; - - /* Read FPGA Reagister */ - fpga_selection_3_reg = in8(FPGA_SELECTION_3_REG); - - switch (uart_config) - { - case L1: - /* ----------------------------------------------------------------------- */ - /* L1 configuration: UART0 = 8 pins */ - /* ----------------------------------------------------------------------- */ - /* Configure FPGA */ - fpga_selection_3_reg = fpga_selection_3_reg & ~FPGA_SEL3_REG_SEL_UART_CONFIG_MASK; - fpga_selection_3_reg = fpga_selection_3_reg | FPGA_SEL3_REG_SEL_UART_CONFIG1; - out8(FPGA_SELECTION_3_REG, fpga_selection_3_reg); - - break; - - case L2: - /* ----------------------------------------------------------------------- */ - /* L2 configuration: UART0 = 4 pins */ - /* UART1 = 4 pins */ - /* ----------------------------------------------------------------------- */ - /* Configure FPGA */ - fpga_selection_3_reg = fpga_selection_3_reg & ~FPGA_SEL3_REG_SEL_UART_CONFIG_MASK; - fpga_selection_3_reg = fpga_selection_3_reg | FPGA_SEL3_REG_SEL_UART_CONFIG2; - out8(FPGA_SELECTION_3_REG, fpga_selection_3_reg); - - break; - - case L3: - /* ----------------------------------------------------------------------- */ - /* L3 configuration: UART0 = 4 pins */ - /* UART1 = 2 pins */ - /* UART2 = 2 pins */ - /* ----------------------------------------------------------------------- */ - /* Configure FPGA */ - fpga_selection_3_reg = fpga_selection_3_reg & ~FPGA_SEL3_REG_SEL_UART_CONFIG_MASK; - fpga_selection_3_reg = fpga_selection_3_reg | FPGA_SEL3_REG_SEL_UART_CONFIG3; - out8(FPGA_SELECTION_3_REG, fpga_selection_3_reg); - break; - - case L4: - /* Configure FPGA */ - fpga_selection_3_reg = fpga_selection_3_reg & ~FPGA_SEL3_REG_SEL_UART_CONFIG_MASK; - fpga_selection_3_reg = fpga_selection_3_reg | FPGA_SEL3_REG_SEL_UART_CONFIG4; - out8(FPGA_SELECTION_3_REG, fpga_selection_3_reg); - - break; - - default: - /* Unsupported UART configuration number */ - for (;;) - ; - break; - - } -} - - -/*----------------------------------------------------------------------------+ - | init_default_gpio - +----------------------------------------------------------------------------*/ -void init_default_gpio(gpio_param_s (*gpio_tab)[GPIO_MAX]) -{ - int i; - - /* Init GPIO0 */ - for(i=0; i<GPIO_MAX; i++) - { - gpio_tab[GPIO0][i].add = GPIO0_BASE; - gpio_tab[GPIO0][i].in_out = GPIO_DIS; - gpio_tab[GPIO0][i].alt_nb = GPIO_SEL; - } - - /* Init GPIO1 */ - for(i=0; i<GPIO_MAX; i++) - { - gpio_tab[GPIO1][i].add = GPIO1_BASE; - gpio_tab[GPIO1][i].in_out = GPIO_DIS; - gpio_tab[GPIO1][i].alt_nb = GPIO_SEL; - } - - /* EBC_CS_N(5) - GPIO0_10 */ - gpio_tab[GPIO0][10].in_out = GPIO_OUT; - gpio_tab[GPIO0][10].alt_nb = GPIO_ALT1; - - /* EBC_CS_N(4) - GPIO0_9 */ - gpio_tab[GPIO0][9].in_out = GPIO_OUT; - gpio_tab[GPIO0][9].alt_nb = GPIO_ALT1; -} - -/*----------------------------------------------------------------------------+ - | update_uart_ios - +------------------------------------------------------------------------------ - | - | Set UART Configuration in PowerPC440EP - | - | +---------------------------------------------------------------------+ - | | Configuartion | Connector | Nb of pins | Pins | Associated | - | | Number | Port Name | available | naming | CORE | - | +-----------------+---------------+------------+--------+-------------+ - | | L1 | Port_A | 8 | UART | UART core 0 | - | +-----------------+---------------+------------+--------+-------------+ - | | L2 | Port_A | 4 | UART1 | UART core 0 | - | | (L2D) | Port_B | 4 | UART2 | UART core 1 | - | +-----------------+---------------+------------+--------+-------------+ - | | L3 | Port_A | 4 | UART1 | UART core 0 | - | | (L3D) | Port_B | 2 | UART2 | UART core 1 | - | | | Port_C | 2 | UART3 | UART core 2 | - | +-----------------+---------------+------------+--------+-------------+ - | | | Port_A | 2 | UART1 | UART core 0 | - | | L4 | Port_B | 2 | UART2 | UART core 1 | - | | (L4D) | Port_C | 2 | UART3 | UART core 2 | - | | | Port_D | 2 | UART4 | UART core 3 | - | +-----------------+---------------+------------+--------+-------------+ - | - | Involved GPIOs - | - | +------------------------------------------------------------------------------+ - | | GPIO | Aternate 1 | I/O | Alternate 2 | I/O | Alternate 3 | I/O | - | +---------+------------------+-----+-----------------+-----+-------------+-----+ - | | GPIO1_2 | UART0_DCD_N | I | UART1_DSR_CTS_N | I | UART2_SOUT | O | - | | GPIO1_3 | UART0_8PIN_DSR_N | I | UART1_RTS_DTR_N | O | UART2_SIN | I | - | | GPIO1_4 | UART0_8PIN_CTS_N | I | NA | NA | UART3_SIN | I | - | | GPIO1_5 | UART0_RTS_N | O | NA | NA | UART3_SOUT | O | - | | GPIO1_6 | UART0_DTR_N | O | UART1_SOUT | O | NA | NA | - | | GPIO1_7 | UART0_RI_N | I | UART1_SIN | I | NA | NA | - | +------------------------------------------------------------------------------+ - | - | - +----------------------------------------------------------------------------*/ - -void update_uart_ios(uart_config_nb_t uart_config, gpio_param_s (*gpio_tab)[GPIO_MAX]) -{ - switch (uart_config) - { - case L1: - /* ----------------------------------------------------------------------- */ - /* L1 configuration: UART0 = 8 pins */ - /* ----------------------------------------------------------------------- */ - /* Update GPIO Configuration Table */ - gpio_tab[GPIO1][2].in_out = GPIO_IN; - gpio_tab[GPIO1][2].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO1][3].in_out = GPIO_IN; - gpio_tab[GPIO1][3].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO1][4].in_out = GPIO_IN; - gpio_tab[GPIO1][4].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO1][5].in_out = GPIO_OUT; - gpio_tab[GPIO1][5].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO1][6].in_out = GPIO_OUT; - gpio_tab[GPIO1][6].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO1][7].in_out = GPIO_IN; - gpio_tab[GPIO1][7].alt_nb = GPIO_ALT1; - - break; - - case L2: - /* ----------------------------------------------------------------------- */ - /* L2 configuration: UART0 = 4 pins */ - /* UART1 = 4 pins */ - /* ----------------------------------------------------------------------- */ - /* Update GPIO Configuration Table */ - gpio_tab[GPIO1][2].in_out = GPIO_IN; - gpio_tab[GPIO1][2].alt_nb = GPIO_ALT2; - - gpio_tab[GPIO1][3].in_out = GPIO_OUT; - gpio_tab[GPIO1][3].alt_nb = GPIO_ALT2; - - gpio_tab[GPIO1][4].in_out = GPIO_IN; - gpio_tab[GPIO1][4].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO1][5].in_out = GPIO_OUT; - gpio_tab[GPIO1][5].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO1][6].in_out = GPIO_OUT; - gpio_tab[GPIO1][6].alt_nb = GPIO_ALT2; - - gpio_tab[GPIO1][7].in_out = GPIO_IN; - gpio_tab[GPIO1][7].alt_nb = GPIO_ALT2; - - break; - - case L3: - /* ----------------------------------------------------------------------- */ - /* L3 configuration: UART0 = 4 pins */ - /* UART1 = 2 pins */ - /* UART2 = 2 pins */ - /* ----------------------------------------------------------------------- */ - /* Update GPIO Configuration Table */ - gpio_tab[GPIO1][2].in_out = GPIO_OUT; - gpio_tab[GPIO1][2].alt_nb = GPIO_ALT3; - - gpio_tab[GPIO1][3].in_out = GPIO_IN; - gpio_tab[GPIO1][3].alt_nb = GPIO_ALT3; - - gpio_tab[GPIO1][4].in_out = GPIO_IN; - gpio_tab[GPIO1][4].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO1][5].in_out = GPIO_OUT; - gpio_tab[GPIO1][5].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO1][6].in_out = GPIO_OUT; - gpio_tab[GPIO1][6].alt_nb = GPIO_ALT2; - - gpio_tab[GPIO1][7].in_out = GPIO_IN; - gpio_tab[GPIO1][7].alt_nb = GPIO_ALT2; - - break; - - case L4: - /* ----------------------------------------------------------------------- */ - /* L4 configuration: UART0 = 2 pins */ - /* UART1 = 2 pins */ - /* UART2 = 2 pins */ - /* UART3 = 2 pins */ - /* ----------------------------------------------------------------------- */ - /* Update GPIO Configuration Table */ - gpio_tab[GPIO1][2].in_out = GPIO_OUT; - gpio_tab[GPIO1][2].alt_nb = GPIO_ALT3; - - gpio_tab[GPIO1][3].in_out = GPIO_IN; - gpio_tab[GPIO1][3].alt_nb = GPIO_ALT3; - - gpio_tab[GPIO1][4].in_out = GPIO_IN; - gpio_tab[GPIO1][4].alt_nb = GPIO_ALT3; - - gpio_tab[GPIO1][5].in_out = GPIO_OUT; - gpio_tab[GPIO1][5].alt_nb = GPIO_ALT3; - - gpio_tab[GPIO1][6].in_out = GPIO_OUT; - gpio_tab[GPIO1][6].alt_nb = GPIO_ALT2; - - gpio_tab[GPIO1][7].in_out = GPIO_IN; - gpio_tab[GPIO1][7].alt_nb = GPIO_ALT2; - - break; - - default: - /* Unsupported UART configuration number */ - printf("ERROR - Unsupported UART configuration number.\n\n"); - for (;;) - ; - break; - - } - - /* Set input Selection Register on Alt_Receive for UART Input Core */ - out32(GPIO1_IS1L, (in32(GPIO1_IS1L) | 0x0FC30000)); - out32(GPIO1_IS2L, (in32(GPIO1_IS2L) | 0x0C030000)); - out32(GPIO1_IS3L, (in32(GPIO1_IS3L) | 0x03C00000)); -} - -/*----------------------------------------------------------------------------+ - | update_ndfc_ios(void). - +----------------------------------------------------------------------------*/ -void update_ndfc_ios(gpio_param_s (*gpio_tab)[GPIO_MAX]) -{ - /* Update GPIO Configuration Table */ - gpio_tab[GPIO0][6].in_out = GPIO_OUT; /* EBC_CS_N(1) */ - gpio_tab[GPIO0][6].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO0][7].in_out = GPIO_OUT; /* EBC_CS_N(2) */ - gpio_tab[GPIO0][7].alt_nb = GPIO_ALT1; - -#if 0 - gpio_tab[GPIO0][7].in_out = GPIO_OUT; /* EBC_CS_N(3) */ - gpio_tab[GPIO0][7].alt_nb = GPIO_ALT1; -#endif -} - -/*----------------------------------------------------------------------------+ - | update_zii_ios(void). - +----------------------------------------------------------------------------*/ -void update_zii_ios(gpio_param_s (*gpio_tab)[GPIO_MAX]) -{ - /* Update GPIO Configuration Table */ - gpio_tab[GPIO0][12].in_out = GPIO_IN; /* ZII_p0Rxd(0) */ - gpio_tab[GPIO0][12].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO0][13].in_out = GPIO_IN; /* ZII_p0Rxd(1) */ - gpio_tab[GPIO0][13].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO0][14].in_out = GPIO_IN; /* ZII_p0Rxd(2) */ - gpio_tab[GPIO0][14].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO0][15].in_out = GPIO_IN; /* ZII_p0Rxd(3) */ - gpio_tab[GPIO0][15].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO0][16].in_out = GPIO_OUT; /* ZII_p0Txd(0) */ - gpio_tab[GPIO0][16].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO0][17].in_out = GPIO_OUT; /* ZII_p0Txd(1) */ - gpio_tab[GPIO0][17].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO0][18].in_out = GPIO_OUT; /* ZII_p0Txd(2) */ - gpio_tab[GPIO0][18].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO0][19].in_out = GPIO_OUT; /* ZII_p0Txd(3) */ - gpio_tab[GPIO0][19].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO0][20].in_out = GPIO_IN; /* ZII_p0Rx_er */ - gpio_tab[GPIO0][20].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO0][21].in_out = GPIO_IN; /* ZII_p0Rx_dv */ - gpio_tab[GPIO0][21].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO0][22].in_out = GPIO_IN; /* ZII_p0Crs */ - gpio_tab[GPIO0][22].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO0][23].in_out = GPIO_OUT; /* ZII_p0Tx_er */ - gpio_tab[GPIO0][23].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO0][24].in_out = GPIO_OUT; /* ZII_p0Tx_en */ - gpio_tab[GPIO0][24].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO0][25].in_out = GPIO_IN; /* ZII_p0Col */ - gpio_tab[GPIO0][25].alt_nb = GPIO_ALT1; - -} - -/*----------------------------------------------------------------------------+ - | update_uic_0_3_irq_ios(). - +----------------------------------------------------------------------------*/ -void update_uic_0_3_irq_ios(gpio_param_s (*gpio_tab)[GPIO_MAX]) -{ - gpio_tab[GPIO1][8].in_out = GPIO_IN; /* UIC_IRQ(0) */ - gpio_tab[GPIO1][8].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO1][9].in_out = GPIO_IN; /* UIC_IRQ(1) */ - gpio_tab[GPIO1][9].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO1][10].in_out = GPIO_IN; /* UIC_IRQ(2) */ - gpio_tab[GPIO1][10].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO1][11].in_out = GPIO_IN; /* UIC_IRQ(3) */ - gpio_tab[GPIO1][11].alt_nb = GPIO_ALT1; -} - -/*----------------------------------------------------------------------------+ - | update_uic_4_9_irq_ios(). - +----------------------------------------------------------------------------*/ -void update_uic_4_9_irq_ios(gpio_param_s (*gpio_tab)[GPIO_MAX]) -{ - gpio_tab[GPIO1][12].in_out = GPIO_IN; /* UIC_IRQ(4) */ - gpio_tab[GPIO1][12].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO1][13].in_out = GPIO_IN; /* UIC_IRQ(6) */ - gpio_tab[GPIO1][13].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO1][14].in_out = GPIO_IN; /* UIC_IRQ(7) */ - gpio_tab[GPIO1][14].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO1][15].in_out = GPIO_IN; /* UIC_IRQ(8) */ - gpio_tab[GPIO1][15].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO1][16].in_out = GPIO_IN; /* UIC_IRQ(9) */ - gpio_tab[GPIO1][16].alt_nb = GPIO_ALT1; -} - -/*----------------------------------------------------------------------------+ - | update_dma_a_b_ios(). - +----------------------------------------------------------------------------*/ -void update_dma_a_b_ios(gpio_param_s (*gpio_tab)[GPIO_MAX]) -{ - gpio_tab[GPIO1][12].in_out = GPIO_OUT; /* DMA_ACK(1) */ - gpio_tab[GPIO1][12].alt_nb = GPIO_ALT2; - - gpio_tab[GPIO1][13].in_out = GPIO_BI; /* DMA_EOT/TC(1) */ - gpio_tab[GPIO1][13].alt_nb = GPIO_ALT2; - - gpio_tab[GPIO1][14].in_out = GPIO_IN; /* DMA_REQ(0) */ - gpio_tab[GPIO1][14].alt_nb = GPIO_ALT2; - - gpio_tab[GPIO1][15].in_out = GPIO_OUT; /* DMA_ACK(0) */ - gpio_tab[GPIO1][15].alt_nb = GPIO_ALT2; - - gpio_tab[GPIO1][16].in_out = GPIO_BI; /* DMA_EOT/TC(0) */ - gpio_tab[GPIO1][16].alt_nb = GPIO_ALT2; -} - -/*----------------------------------------------------------------------------+ - | update_dma_c_d_ios(). - +----------------------------------------------------------------------------*/ -void update_dma_c_d_ios(gpio_param_s (*gpio_tab)[GPIO_MAX]) -{ - gpio_tab[GPIO0][0].in_out = GPIO_IN; /* DMA_REQ(2) */ - gpio_tab[GPIO0][0].alt_nb = GPIO_ALT2; - - gpio_tab[GPIO0][1].in_out = GPIO_OUT; /* DMA_ACK(2) */ - gpio_tab[GPIO0][1].alt_nb = GPIO_ALT2; - - gpio_tab[GPIO0][2].in_out = GPIO_BI; /* DMA_EOT/TC(2) */ - gpio_tab[GPIO0][2].alt_nb = GPIO_ALT2; - - gpio_tab[GPIO0][3].in_out = GPIO_IN; /* DMA_REQ(3) */ - gpio_tab[GPIO0][3].alt_nb = GPIO_ALT2; - - gpio_tab[GPIO0][4].in_out = GPIO_OUT; /* DMA_ACK(3) */ - gpio_tab[GPIO0][4].alt_nb = GPIO_ALT2; - - gpio_tab[GPIO0][5].in_out = GPIO_BI; /* DMA_EOT/TC(3) */ - gpio_tab[GPIO0][5].alt_nb = GPIO_ALT2; - -} - -/*----------------------------------------------------------------------------+ - | update_ebc_master_ios(). - +----------------------------------------------------------------------------*/ -void update_ebc_master_ios(gpio_param_s (*gpio_tab)[GPIO_MAX]) -{ - gpio_tab[GPIO0][27].in_out = GPIO_IN; /* EXT_EBC_REQ */ - gpio_tab[GPIO0][27].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO0][29].in_out = GPIO_OUT; /* EBC_EXT_HDLA */ - gpio_tab[GPIO0][29].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO0][30].in_out = GPIO_OUT; /* EBC_EXT_ACK */ - gpio_tab[GPIO0][30].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO0][31].in_out = GPIO_OUT; /* EBC_EXR_BUSREQ */ - gpio_tab[GPIO0][31].alt_nb = GPIO_ALT1; -} - -/*----------------------------------------------------------------------------+ - | update_usb2_device_ios(). - +----------------------------------------------------------------------------*/ -void update_usb2_device_ios(gpio_param_s (*gpio_tab)[GPIO_MAX]) -{ - gpio_tab[GPIO0][26].in_out = GPIO_IN; /* USB2D_RXVALID */ - gpio_tab[GPIO0][26].alt_nb = GPIO_ALT2; - - gpio_tab[GPIO0][27].in_out = GPIO_IN; /* USB2D_RXERROR */ - gpio_tab[GPIO0][27].alt_nb = GPIO_ALT2; - - gpio_tab[GPIO0][28].in_out = GPIO_OUT; /* USB2D_TXVALID */ - gpio_tab[GPIO0][28].alt_nb = GPIO_ALT2; - - gpio_tab[GPIO0][29].in_out = GPIO_OUT; /* USB2D_PAD_SUSPNDM */ - gpio_tab[GPIO0][29].alt_nb = GPIO_ALT2; - - gpio_tab[GPIO0][30].in_out = GPIO_OUT; /* USB2D_XCVRSELECT */ - gpio_tab[GPIO0][30].alt_nb = GPIO_ALT2; - - gpio_tab[GPIO0][31].in_out = GPIO_OUT; /* USB2D_TERMSELECT */ - gpio_tab[GPIO0][31].alt_nb = GPIO_ALT2; - - gpio_tab[GPIO1][0].in_out = GPIO_OUT; /* USB2D_OPMODE0 */ - gpio_tab[GPIO1][0].alt_nb = GPIO_ALT1; - - gpio_tab[GPIO1][1].in_out = GPIO_OUT; /* USB2D_OPMODE1 */ - gpio_tab[GPIO1][1].alt_nb = GPIO_ALT1; - -} - -/*----------------------------------------------------------------------------+ - | update_pci_patch_ios(). - +----------------------------------------------------------------------------*/ -void update_pci_patch_ios(gpio_param_s (*gpio_tab)[GPIO_MAX]) -{ - gpio_tab[GPIO0][29].in_out = GPIO_OUT; /* EBC_EXT_HDLA */ - gpio_tab[GPIO0][29].alt_nb = GPIO_ALT1; -} - -/*----------------------------------------------------------------------------+ - | set_chip_gpio_configuration(unsigned char gpio_core, - | gpio_param_s (*gpio_tab)[GPIO_MAX]) - | Put the core impacted by clock modification and sharing in reset. - | Config the select registers to resolve the sharing depending of the config. - | Configure the GPIO registers. - | - +----------------------------------------------------------------------------*/ -void set_chip_gpio_configuration(unsigned char gpio_core, gpio_param_s (*gpio_tab)[GPIO_MAX]) -{ - unsigned char i=0, j=0, reg_offset = 0; - unsigned long gpio_reg, gpio_core_add; - - /* GPIO config of the GPIOs 0 to 31 */ - for (i=0; i<GPIO_MAX; i++, j++) - { - if (i == GPIO_MAX/2) - { - reg_offset = 4; - j = i-16; - } - - gpio_core_add = gpio_tab[gpio_core][i].add; - - if ( (gpio_tab[gpio_core][i].in_out == GPIO_IN) || - (gpio_tab[gpio_core][i].in_out == GPIO_BI )) - { - switch (gpio_tab[gpio_core][i].alt_nb) - { - case GPIO_SEL: - break; - - case GPIO_ALT1: - gpio_reg = in32(GPIO_IS1(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2)); - gpio_reg = gpio_reg | (GPIO_IN_SEL >> (j*2)); - out32(GPIO_IS1(gpio_core_add+reg_offset), gpio_reg); - break; - - case GPIO_ALT2: - gpio_reg = in32(GPIO_IS2(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2)); - gpio_reg = gpio_reg | (GPIO_IN_SEL >> (j*2)); - out32(GPIO_IS2(gpio_core_add+reg_offset), gpio_reg); - break; - - case GPIO_ALT3: - gpio_reg = in32(GPIO_IS3(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2)); - gpio_reg = gpio_reg | (GPIO_IN_SEL >> (j*2)); - out32(GPIO_IS3(gpio_core_add+reg_offset), gpio_reg); - break; - } - } - if ( (gpio_tab[gpio_core][i].in_out == GPIO_OUT) || - (gpio_tab[gpio_core][i].in_out == GPIO_BI )) - { - - switch (gpio_tab[gpio_core][i].alt_nb) - { - case GPIO_SEL: - break; - case GPIO_ALT1: - gpio_reg = in32(GPIO_OS(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2)); - gpio_reg = gpio_reg | (GPIO_ALT1_SEL >> (j*2)); - out32(GPIO_OS(gpio_core_add+reg_offset), gpio_reg); - gpio_reg = in32(GPIO_TS(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2)); - gpio_reg = gpio_reg | (GPIO_ALT1_SEL >> (j*2)); - out32(GPIO_TS(gpio_core_add+reg_offset), gpio_reg); - break; - case GPIO_ALT2: - gpio_reg = in32(GPIO_OS(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2)); - gpio_reg = gpio_reg | (GPIO_ALT2_SEL >> (j*2)); - out32(GPIO_OS(gpio_core_add+reg_offset), gpio_reg); - gpio_reg = in32(GPIO_TS(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2)); - gpio_reg = gpio_reg | (GPIO_ALT2_SEL >> (j*2)); - out32(GPIO_TS(gpio_core_add+reg_offset), gpio_reg); - break; - case GPIO_ALT3: - gpio_reg = in32(GPIO_OS(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2)); - gpio_reg = gpio_reg | (GPIO_ALT3_SEL >> (j*2)); - out32(GPIO_OS(gpio_core_add+reg_offset), gpio_reg); - gpio_reg = in32(GPIO_TS(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2)); - gpio_reg = gpio_reg | (GPIO_ALT3_SEL >> (j*2)); - out32(GPIO_TS(gpio_core_add+reg_offset), gpio_reg); - break; - } - } - } -} - -/*----------------------------------------------------------------------------+ - | force_bup_core_selection. - +----------------------------------------------------------------------------*/ -void force_bup_core_selection(core_selection_t *core_select_P, config_validity_t *config_val_P) -{ - /* Pointer invalid */ - if (core_select_P == NULL) - { - printf("Configuration invalid pointer 1\n"); - for (;;) - ; - } - - /* L4 Selection */ - *(core_select_P+UART_CORE0) = CORE_SELECTED; - *(core_select_P+UART_CORE1) = CORE_SELECTED; - *(core_select_P+UART_CORE2) = CORE_SELECTED; - *(core_select_P+UART_CORE3) = CORE_SELECTED; - - /* RMII Selection */ - *(core_select_P+RMII_SEL) = CORE_SELECTED; - - /* External Interrupt 0-9 selection */ - *(core_select_P+UIC_0_3) = CORE_SELECTED; - *(core_select_P+UIC_4_9) = CORE_SELECTED; - - *(core_select_P+SCP_CORE) = CORE_SELECTED; - *(core_select_P+DMA_CHANNEL_CD) = CORE_SELECTED; - *(core_select_P+PACKET_REJ_FUNC_AVAIL) = CORE_SELECTED; - *(core_select_P+USB1_DEVICE) = CORE_SELECTED; - - if (is_nand_selected()) { - *(core_select_P+NAND_FLASH) = CORE_SELECTED; - } - - *config_val_P = CONFIG_IS_VALID; - -} - -/*----------------------------------------------------------------------------+ - | configure_ppc440ep_pins. - +----------------------------------------------------------------------------*/ -void configure_ppc440ep_pins(void) -{ - uart_config_nb_t uart_configuration; - config_validity_t config_val = CONFIG_IS_INVALID; - - /* Create Core Selection Table */ - core_selection_t ppc440ep_core_selection[MAX_CORE_SELECT_NB] = - { - CORE_NOT_SELECTED, /* IIC_CORE, */ - CORE_NOT_SELECTED, /* SPC_CORE, */ - CORE_NOT_SELECTED, /* DMA_CHANNEL_AB, */ - CORE_NOT_SELECTED, /* UIC_4_9, */ - CORE_NOT_SELECTED, /* USB2_HOST, */ - CORE_NOT_SELECTED, /* DMA_CHANNEL_CD, */ - CORE_NOT_SELECTED, /* USB2_DEVICE, */ - CORE_NOT_SELECTED, /* PACKET_REJ_FUNC_AVAIL, */ - CORE_NOT_SELECTED, /* USB1_DEVICE, */ - CORE_NOT_SELECTED, /* EBC_MASTER, */ - CORE_NOT_SELECTED, /* NAND_FLASH, */ - CORE_NOT_SELECTED, /* UART_CORE0, */ - CORE_NOT_SELECTED, /* UART_CORE1, */ - CORE_NOT_SELECTED, /* UART_CORE2, */ - CORE_NOT_SELECTED, /* UART_CORE3, */ - CORE_NOT_SELECTED, /* MII_SEL, */ - CORE_NOT_SELECTED, /* RMII_SEL, */ - CORE_NOT_SELECTED, /* SMII_SEL, */ - CORE_NOT_SELECTED, /* PACKET_REJ_FUNC_EN */ - CORE_NOT_SELECTED, /* UIC_0_3 */ - CORE_NOT_SELECTED, /* USB1_HOST */ - CORE_NOT_SELECTED /* PCI_PATCH */ - }; - - gpio_param_s gpio_tab[GPIO_GROUP_MAX][GPIO_MAX]; - - /* Table Default Initialisation + FPGA Access */ - init_default_gpio(gpio_tab); - set_chip_gpio_configuration(GPIO0, gpio_tab); - set_chip_gpio_configuration(GPIO1, gpio_tab); - - /* Update Table */ - force_bup_core_selection(ppc440ep_core_selection, &config_val); -#if 0 /* test-only */ - /* If we are running PIBS 1, force known configuration */ - update_core_selection_table(ppc440ep_core_selection, &config_val); -#endif - - /*----------------------------------------------------------------------------+ - | SDR + ios table update + fpga initialization - +----------------------------------------------------------------------------*/ - unsigned long sdr0_pfc1 = 0; - unsigned long sdr0_usb0 = 0; - unsigned long sdr0_mfr = 0; - - /* PCI Always selected */ - - /* I2C Selection */ - if (ppc440ep_core_selection[IIC_CORE] == CORE_SELECTED) - { - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL; - iic1_selection_in_fpga(); - } - - /* SCP Selection */ - if (ppc440ep_core_selection[SCP_CORE] == CORE_SELECTED) - { - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_SCP_SEL; - scp_selection_in_fpga(); - } - - /* UIC 0:3 Selection */ - if (ppc440ep_core_selection[UIC_0_3] == CORE_SELECTED) - { - update_uic_0_3_irq_ios(gpio_tab); - dma_a_b_unselect_in_fpga(); - } - - /* UIC 4:9 Selection */ - if (ppc440ep_core_selection[UIC_4_9] == CORE_SELECTED) - { - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_DIS_MASK) | SDR0_PFC1_DIS_UICIRQ5_SEL; - update_uic_4_9_irq_ios(gpio_tab); - } - - /* DMA AB Selection */ - if (ppc440ep_core_selection[DMA_CHANNEL_AB] == CORE_SELECTED) - { - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_DIS_MASK) | SDR0_PFC1_DIS_DMAR_SEL; - update_dma_a_b_ios(gpio_tab); - dma_a_b_selection_in_fpga(); - } - - /* DMA CD Selection */ - if (ppc440ep_core_selection[DMA_CHANNEL_CD] == CORE_SELECTED) - { - update_dma_c_d_ios(gpio_tab); - dma_c_d_selection_in_fpga(); - } - - /* EBC Master Selection */ - if (ppc440ep_core_selection[EBC_MASTER] == CORE_SELECTED) - { - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_ERE_MASK) | SDR0_PFC1_ERE_EXTR_SEL; - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UES_MASK) | SDR0_PFC1_UES_EBCHR_SEL; - update_ebc_master_ios(gpio_tab); - } - - /* PCI Patch Enable */ - if (ppc440ep_core_selection[PCI_PATCH] == CORE_SELECTED) - { - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UES_MASK) | SDR0_PFC1_UES_EBCHR_SEL; - update_pci_patch_ios(gpio_tab); - } - - /* USB2 Host Selection - Not Implemented in PowerPC 440EP Pass1 */ - if (ppc440ep_core_selection[USB2_HOST] == CORE_SELECTED) - { - /* Not Implemented in PowerPC 440EP Pass1-Pass2 */ - printf("Invalid configuration => USB2 Host selected\n"); - for (;;) - ; - /*usb2_host_selection_in_fpga(); */ - } - - /* USB2.0 Device Selection */ - if (ppc440ep_core_selection[USB2_DEVICE] == CORE_SELECTED) - { - update_usb2_device_ios(gpio_tab); - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UES_MASK) | SDR0_PFC1_UES_USB2D_SEL; - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UPR_MASK) | SDR0_PFC1_UPR_DISABLE; - - mfsdr(SDR0_USB0, sdr0_usb0); - sdr0_usb0 = sdr0_usb0 &~SDR0_USB0_USB_DEVSEL_MASK; - sdr0_usb0 = sdr0_usb0 | SDR0_USB0_USB20D_DEVSEL; - mtsdr(SDR0_USB0, sdr0_usb0); - - usb2_device_selection_in_fpga(); - } - - /* USB1.1 Device Selection */ - if (ppc440ep_core_selection[USB1_DEVICE] == CORE_SELECTED) - { - mfsdr(SDR0_USB0, sdr0_usb0); - sdr0_usb0 = sdr0_usb0 &~SDR0_USB0_USB_DEVSEL_MASK; - sdr0_usb0 = sdr0_usb0 | SDR0_USB0_USB11D_DEVSEL; - mtsdr(SDR0_USB0, sdr0_usb0); - } - - /* USB1.1 Host Selection */ - if (ppc440ep_core_selection[USB1_HOST] == CORE_SELECTED) - { - mfsdr(SDR0_USB0, sdr0_usb0); - sdr0_usb0 = sdr0_usb0 &~SDR0_USB0_LEEN_MASK; - sdr0_usb0 = sdr0_usb0 | SDR0_USB0_LEEN_ENABLE; - mtsdr(SDR0_USB0, sdr0_usb0); - } - - /* NAND Flash Selection */ - if (ppc440ep_core_selection[NAND_FLASH] == CORE_SELECTED) - { - update_ndfc_ios(gpio_tab); - mtsdr(SDR0_CUST0, SDR0_CUST0_MUX_NDFC_SEL | - SDR0_CUST0_NDFC_ENABLE | - SDR0_CUST0_NDFC_BW_8_BIT | - SDR0_CUST0_NDFC_ARE_MASK | - SDR0_CUST0_CHIPSELGAT_EN1 | - SDR0_CUST0_CHIPSELGAT_EN2); - ndfc_selection_in_fpga(); - } - else - { - /* Set Mux on EMAC */ - mtsdr(SDR0_CUST0, SDR0_CUST0_MUX_EMAC_SEL); - } - - /* MII Selection */ - if (ppc440ep_core_selection[MII_SEL] == CORE_SELECTED) - { - update_zii_ios(gpio_tab); - mfsdr(SDR0_MFR, sdr0_mfr); - sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_MII; - mtsdr(SDR0_MFR, sdr0_mfr); - - set_phy_configuration_through_fpga(ZMII_CONFIGURATION_IS_MII); - } - - /* RMII Selection */ - if (ppc440ep_core_selection[RMII_SEL] == CORE_SELECTED) - { - update_zii_ios(gpio_tab); - mfsdr(SDR0_MFR, sdr0_mfr); - sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_10M; - mtsdr(SDR0_MFR, sdr0_mfr); - - set_phy_configuration_through_fpga(ZMII_CONFIGURATION_IS_RMII); - } - - /* SMII Selection */ - if (ppc440ep_core_selection[SMII_SEL] == CORE_SELECTED) - { - update_zii_ios(gpio_tab); - mfsdr(SDR0_MFR, sdr0_mfr); - sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_SMII; - mtsdr(SDR0_MFR, sdr0_mfr); - - set_phy_configuration_through_fpga(ZMII_CONFIGURATION_IS_SMII); - } - - /* UART Selection */ - uart_configuration = get_uart_configuration(); - switch (uart_configuration) - { - case L1: /* L1 Selection */ - /* UART0 8 pins Only */ - /*sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) | SDR0_PFC1_U0ME_DSR_DTR; */ - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) |SDR0_PFC1_U0ME_CTS_RTS; /* Chip Pb */ - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0IM_MASK) | SDR0_PFC1_U0IM_8PINS; - break; - case L2: /* L2 Selection */ - /* UART0 and UART1 4 pins */ - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) | SDR0_PFC1_U1ME_DSR_DTR; - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0IM_MASK) | SDR0_PFC1_U0IM_4PINS; - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U1ME_MASK) | SDR0_PFC1_U1ME_DSR_DTR; - break; - case L3: /* L3 Selection */ - /* UART0 4 pins, UART1 and UART2 2 pins */ - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) | SDR0_PFC1_U1ME_DSR_DTR; - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0IM_MASK) | SDR0_PFC1_U0IM_4PINS; - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U1ME_MASK) | SDR0_PFC1_U1ME_DSR_DTR; - break; - case L4: /* L4 Selection */ - /* UART0, UART1, UART2 and UART3 2 pins */ - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) | SDR0_PFC1_U0ME_DSR_DTR; - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0IM_MASK) | SDR0_PFC1_U0IM_4PINS; - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U1ME_MASK) | SDR0_PFC1_U1ME_DSR_DTR; - break; - } - update_uart_ios(uart_configuration, gpio_tab); - - /* UART Selection in all cases */ - uart_selection_in_fpga(uart_configuration); - - /* Packet Reject Function Available */ - if (ppc440ep_core_selection[PACKET_REJ_FUNC_AVAIL] == CORE_SELECTED) - { - /* Set UPR Bit in SDR0_PFC1 Register */ - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UPR_MASK) | SDR0_PFC1_UPR_ENABLE; - } - - /* Packet Reject Function Enable */ - if (ppc440ep_core_selection[PACKET_REJ_FUNC_EN] == CORE_SELECTED) - { - mfsdr(SDR0_MFR, sdr0_mfr); - sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_PKT_REJ_MASK) | SDR0_MFR_PKT_REJ_EN;; - mtsdr(SDR0_MFR, sdr0_mfr); - } - - /* Perform effective access to hardware */ - mtsdr(SDR0_PFC1, sdr0_pfc1); - set_chip_gpio_configuration(GPIO0, gpio_tab); - set_chip_gpio_configuration(GPIO1, gpio_tab); - - /* USB2.0 Device Reset must be done after GPIO setting */ - if (ppc440ep_core_selection[USB2_DEVICE] == CORE_SELECTED) - usb2_device_reset_through_fpga(); - -} diff --git a/board/amcc/bamboo/bamboo.h b/board/amcc/bamboo/bamboo.h deleted file mode 100644 index 49f200a..0000000 --- a/board/amcc/bamboo/bamboo.h +++ /dev/null @@ -1,348 +0,0 @@ -/* - * (C) Copyright 2005 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/*----------------------------------------------------------------------------+ - | FPGA registers and bit definitions - +----------------------------------------------------------------------------*/ -/* - * PowerPC 440EP Board FPGA is reached with physical address 0x80001FF0. - * TLB initialization makes it correspond to logical address 0x80001FF0. - * => Done init_chip.s in bootlib - */ -#define FPGA_BASE_ADDR 0x80002000 - -/*----------------------------------------------------------------------------+ - | Board Jumpers Setting Register - | Board Settings provided by jumpers - +----------------------------------------------------------------------------*/ -#define FPGA_SETTING_REG (FPGA_BASE_ADDR+0x3) -/* Boot from small flash */ -#define FPGA_SET_REG_BOOT_SMALL_FLASH 0x80 -/* Operational Flash versus SRAM position in Memory Map */ -#define FPGA_SET_REG_OP_CODE_SRAM_SEL_MASK 0x40 -#define FPGA_SET_REG_OP_CODE_FLASH_ABOVE 0x40 -#define FPGA_SET_REG_SRAM_ABOVE 0x00 -/* Boot From NAND Flash */ -#define FPGA_SET_REG_BOOT_NAND_FLASH_MASK 0x40 -#define FPGA_SET_REG_BOOT_NAND_FLASH_SELECT 0x00 -/* On Board PCI Arbiter Select */ -#define FPGA_SET_REG_PCI_EXT_ARBITER_SEL_MASK 0x10 -#define FPGA_SET_REG_PCI_EXT_ARBITER_SEL 0x00 - -/*----------------------------------------------------------------------------+ - | Functions Selection Register 1 - +----------------------------------------------------------------------------*/ -#define FPGA_SELECTION_1_REG (FPGA_BASE_ADDR+0x4) -#define FPGA_SEL_1_REG_PHY_MASK 0xE0 -#define FPGA_SEL_1_REG_MII 0x80 -#define FPGA_SEL_1_REG_RMII 0x40 -#define FPGA_SEL_1_REG_SMII 0x20 -#define FPGA_SEL_1_REG_USB2_DEV_SEL 0x10 /* USB2 Device Selection */ -#define FPGA_SEL_1_REG_USB2_HOST_SEL 0x08 /* USB2 Host Selection */ -#define FPGA_SEL_1_REG_NF_SELEC_MASK 0x07 /* NF Selection Mask */ -#define FPGA_SEL_1_REG_NF0_SEL_BY_NFCS1 0x04 /* NF0 Selected by NF_CS1 */ -#define FPGA_SEL_1_REG_NF1_SEL_BY_NFCS2 0x02 /* NF1 Selected by NF_CS2 */ -#define FPGA_SEL_1_REG_NF1_SEL_BY_NFCS3 0x01 /* NF1 Selected by NF_CS3 */ - -/*----------------------------------------------------------------------------+ - | Functions Selection Register 2 - +----------------------------------------------------------------------------*/ -#define FPGA_SELECTION_2_REG (FPGA_BASE_ADDR+0x5) -#define FPGA_SEL2_REG_IIC1_SCP_SEL_MASK 0x80 /* IIC1 / SCP Selection */ -#define FPGA_SEL2_REG_SEL_FRAM 0x80 /* FRAM on IIC1 bus selected - SCP Select */ -#define FPGA_SEL2_REG_SEL_SCP 0x80 /* Identical to SCP Selection */ -#define FPGA_SEL2_REG_SEL_IIC1 0x00 /* IIC1 Selection - Default Value */ -#define FPGA_SEL2_REG_SEL_DMA_A_B 0x40 /* DMA A & B channels selected */ -#define FPGA_SEL2_REG_SEL_DMA_C_D 0x20 /* DMA C & D channels selected */ -#define FPGA_SEL2_REG_DMA_EOT_TC_3_SEL 0x10 /* 0 = EOT - input to 440EP */ - /* 1 = TC - output from 440EP */ -#define FPGA_SEL2_REG_DMA_EOT_TC_2_SEL 0x08 /* 0 = EOT (input to 440EP) */ - /* 1 = TC (output from 440EP) */ -#define FPGA_SEL2_REG_SEL_GPIO_1 0x04 /* EBC_GPIO & USB2_GPIO selected */ -#define FPGA_SEL2_REG_SEL_GPIO_2 0x02 /* Ether._GPIO & UART_GPIO selected */ -#define FPGA_SEL2_REG_SEL_GPIO_3 0x01 /* DMA_GPIO & Trace_GPIO selected */ - -/*----------------------------------------------------------------------------+ - | Functions Selection Register 3 - +----------------------------------------------------------------------------*/ -#define FPGA_SELECTION_3_REG (FPGA_BASE_ADDR+0x6) -#define FPGA_SEL3_REG_EXP_SLOT_EN 0x80 /* Expansion Slot enabled */ -#define FPGA_SEL3_REG_SEL_UART_CONFIG_MASK 0x70 -#define FPGA_SEL3_REG_SEL_UART_CONFIG1 0x40 /* one 8_pin UART */ -#define FPGA_SEL3_REG_SEL_UART_CONFIG2 0x20 /* two 4_pin UARTs */ -#define FPGA_SEL3_REG_SEL_UART_CONFIG3 0x10 /* one 4_pin & two 2_pin UARTs */ -#define FPGA_SEL3_REG_SEL_UART_CONFIG4 0x08 /* four 2_pin UARTs */ -#define FPGA_SEL3_REG_DTR_DSR_MODE_4_PIN_UART 0x00 /* DTR/DSR mode for 4_pin_UART */ -#define FPGA_SEL3_REG_RTS_CTS_MODE_4_PIN_UART 0x04 /* RTS/CTS mode for 4_pin_UART */ - -/*----------------------------------------------------------------------------+ - | Soft Reset Register - +----------------------------------------------------------------------------*/ -#define FPGA_RESET_REG (FPGA_BASE_ADDR+0x7) -#define FPGA_RESET_REG_RESET_USB20_DEV 0x80 /* Hard Reset of the GT3200 */ -#define FPGA_RESET_REG_RESET_DISPLAY 0x40 /* Hard Reset on Display Device */ -#define FPGA_RESET_REG_STATUS_LED_0 0x08 /* 1 = Led On */ -#define FPGA_RESET_REG_STATUS_LED_1 0x04 /* 1 = Led On */ -#define FPGA_RESET_REG_STATUS_LED_2 0x02 /* 1 = Led On */ -#define FPGA_RESET_REG_STATUS_LED_3 0x01 /* 1 = Led On */ - - -/*----------------------------------------------------------------------------+ -| SDR Configuration registers -+----------------------------------------------------------------------------*/ -#define SDR0_SDSTP1_EBC_ROM_BS_MASK 0x00006000 /* EBC Boot Size Mask */ -#define SDR0_SDSTP1_EBC_ROM_BS_32BIT 0x00004000 /* EBC 32 bits */ -#define SDR0_SDSTP1_EBC_ROM_BS_16BIT 0x00002000 /* EBC 16 Bits */ -#define SDR0_SDSTP1_EBC_ROM_BS_8BIT 0x00000000 /* EBC 8 Bits */ - -#define SDR0_SDSTP1_BOOT_SEL_MASK 0x00001800 /* Boot device Selection Mask */ -#define SDR0_SDSTP1_BOOT_SEL_EBC 0x00000000 /* EBC */ -#define SDR0_SDSTP1_BOOT_SEL_PCI 0x00000800 /* PCI */ -#define SDR0_SDSTP1_BOOT_SEL_NDFC 0x00001000 /* NDFC */ - -/* Serial Device Enabled - Addr = 0xA8 */ -#define SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS5 -/* Serial Device Enabled - Addr = 0xA4 */ -#define SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS7 - -/* Pin Straps Reg */ -#define SDR0_PSTRP0 0x0040 -#define SDR0_PSTRP0_BOOTSTRAP_MASK 0xE0000000 /* Strap Bits */ - -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS0 0x00000000 /* Default strap settings 0 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS1 0x20000000 /* Default strap settings 1 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS2 0x40000000 /* Default strap settings 2 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS3 0x60000000 /* Default strap settings 3 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS4 0x80000000 /* Default strap settings 4 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS5 0xA0000000 /* Default strap settings 5 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS6 0xC0000000 /* Default strap settings 6 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS7 0xE0000000 /* Default strap settings 7 */ - -/*----------------------------------------------------------------------------+ -| EBC Configuration Register - EBC0_CFG -+----------------------------------------------------------------------------*/ -/* External Bus Three-State Control */ -#define EBC0_CFG_EBTC_DRIVEN 0x80000000 -/* Device-Paced Time-out Disable */ -#define EBC0_CFG_PTD_ENABLED 0x00000000 -/* Ready Timeout Count */ -#define EBC0_CFG_RTC_MASK 0x38000000 -#define EBC0_CFG_RTC_16PERCLK 0x00000000 -#define EBC0_CFG_RTC_32PERCLK 0x08000000 -#define EBC0_CFG_RTC_64PERCLK 0x10000000 -#define EBC0_CFG_RTC_128PERCLK 0x18000000 -#define EBC0_CFG_RTC_256PERCLK 0x20000000 -#define EBC0_CFG_RTC_512PERCLK 0x28000000 -#define EBC0_CFG_RTC_1024PERCLK 0x30000000 -#define EBC0_CFG_RTC_2048PERCLK 0x38000000 -/* External Master Priority Low */ -#define EBC0_CFG_EMPL_LOW 0x00000000 -#define EBC0_CFG_EMPL_MEDIUM_LOW 0x02000000 -#define EBC0_CFG_EMPL_MEDIUM_HIGH 0x04000000 -#define EBC0_CFG_EMPL_HIGH 0x06000000 -/* External Master Priority High */ -#define EBC0_CFG_EMPH_LOW 0x00000000 -#define EBC0_CFG_EMPH_MEDIUM_LOW 0x00800000 -#define EBC0_CFG_EMPH_MEDIUM_HIGH 0x01000000 -#define EBC0_CFG_EMPH_HIGH 0x01800000 -/* Chip Select Three-State Control */ -#define EBC0_CFG_CSTC_DRIVEN 0x00400000 -/* Burst Prefetch */ -#define EBC0_CFG_BPF_ONEDW 0x00000000 -#define EBC0_CFG_BPF_TWODW 0x00100000 -#define EBC0_CFG_BPF_FOURDW 0x00200000 -/* External Master Size */ -#define EBC0_CFG_EMS_8BIT 0x00000000 -/* Power Management Enable */ -#define EBC0_CFG_PME_DISABLED 0x00000000 -#define EBC0_CFG_PME_ENABLED 0x00020000 -/* Power Management Timer */ -#define EBC0_CFG_PMT_ENCODE(n) ((((unsigned long)(n))&0x1F)<<12) - -/*----------------------------------------------------------------------------+ -| Peripheral Bank Configuration Register - EBC0_BnCR -+----------------------------------------------------------------------------*/ -/* BAS - Base Address Select */ -#define EBC0_BNCR_BAS_ENCODE(n) ((((unsigned long)(n))&0xFFF00000)<<0) -/* BS - Bank Size */ -#define EBC0_BNCR_BS_MASK 0x000E0000 -#define EBC0_BNCR_BS_1MB 0x00000000 -#define EBC0_BNCR_BS_2MB 0x00020000 -#define EBC0_BNCR_BS_4MB 0x00040000 -#define EBC0_BNCR_BS_8MB 0x00060000 -#define EBC0_BNCR_BS_16MB 0x00080000 -#define EBC0_BNCR_BS_32MB 0x000A0000 -#define EBC0_BNCR_BS_64MB 0x000C0000 -#define EBC0_BNCR_BS_128MB 0x000E0000 -/* BU - Bank Usage */ -#define EBC0_BNCR_BU_MASK 0x00018000 -#define EBC0_BNCR_BU_RO 0x00008000 -#define EBC0_BNCR_BU_WO 0x00010000 -#define EBC0_BNCR_BU_RW 0x00018000 -/* BW - Bus Width */ -#define EBC0_BNCR_BW_MASK 0x00006000 -#define EBC0_BNCR_BW_8BIT 0x00000000 -#define EBC0_BNCR_BW_16BIT 0x00002000 -#define EBC0_BNCR_BW_32BIT 0x00004000 - -/*----------------------------------------------------------------------------+ -| Peripheral Bank Access Parameters - EBC0_BnAP -+----------------------------------------------------------------------------*/ -/* Burst Mode Enable */ -#define EBC0_BNAP_BME_ENABLED 0x80000000 -#define EBC0_BNAP_BME_DISABLED 0x00000000 -/* Transfert Wait */ -#define EBC0_BNAP_TWT_ENCODE(n) ((((unsigned long)(n))&0xFF)<<23) /* Bits 1:8 */ -/* Chip Select On Timing */ -#define EBC0_BNAP_CSN_ENCODE(n) ((((unsigned long)(n))&0x3)<<18) /* Bits 12:13 */ -/* Output Enable On Timing */ -#define EBC0_BNAP_OEN_ENCODE(n) ((((unsigned long)(n))&0x3)<<16) /* Bits 14:15 */ -/* Write Back Enable On Timing */ -#define EBC0_BNAP_WBN_ENCODE(n) ((((unsigned long)(n))&0x3)<<14) /* Bits 16:17 */ -/* Write Back Enable Off Timing */ -#define EBC0_BNAP_WBF_ENCODE(n) ((((unsigned long)(n))&0x3)<<12) /* Bits 18:19 */ -/* Transfert Hold */ -#define EBC0_BNAP_TH_ENCODE(n) ((((unsigned long)(n))&0x7)<<9) /* Bits 20:22 */ -/* PerReady Enable */ -#define EBC0_BNAP_RE_ENABLED 0x00000100 -#define EBC0_BNAP_RE_DISABLED 0x00000000 -/* Sample On Ready */ -#define EBC0_BNAP_SOR_DELAYED 0x00000000 -#define EBC0_BNAP_SOR_NOT_DELAYED 0x00000080 -/* Byte Enable Mode */ -#define EBC0_BNAP_BEM_WRITEONLY 0x00000000 -#define EBC0_BNAP_BEM_RW 0x00000040 -/* Parity Enable */ -#define EBC0_BNAP_PEN_DISABLED 0x00000000 -#define EBC0_BNAP_PEN_ENABLED 0x00000020 - -/*----------------------------------------------------------------------------+ -| Define Boot devices -+----------------------------------------------------------------------------*/ -/* */ -#define BOOT_FROM_SMALL_FLASH 0x00 -#define BOOT_FROM_LARGE_FLASH_OR_SRAM 0x01 -#define BOOT_FROM_NAND_FLASH0 0x02 -#define BOOT_FROM_PCI 0x03 -#define BOOT_DEVICE_UNKNOWN 0x04 - - -#define PVR_POWERPC_440EP_PASS1 0x42221850 -#define PVR_POWERPC_440EP_PASS2 0x422218D3 - -#define GPIO0 0 -#define GPIO1 1 - -/*#define MAX_SELECTION_NB CORE_NB */ -#define MAX_CORE_SELECT_NB 22 - -/*----------------------------------------------------------------------------+ - | PPC440EP GPIOs addresses. - +----------------------------------------------------------------------------*/ -#define GPIO0_REAL 0xEF600B00 - -#define GPIO1_REAL 0xEF600C00 - -/* Offsets */ -#define GPIOx_OR 0x00 /* GPIO Output Register */ -#define GPIOx_TCR 0x04 /* GPIO Three-State Control Register */ -#define GPIOx_OSL 0x08 /* GPIO Output Select Register (Bits 0-31) */ -#define GPIOx_OSH 0x0C /* GPIO Ouput Select Register (Bits 32-63) */ -#define GPIOx_TSL 0x10 /* GPIO Three-State Select Register (Bits 0-31) */ -#define GPIOx_TSH 0x14 /* GPIO Three-State Select Register (Bits 32-63) */ -#define GPIOx_ODR 0x18 /* GPIO Open drain Register */ -#define GPIOx_IR 0x1C /* GPIO Input Register */ -#define GPIOx_RR1 0x20 /* GPIO Receive Register 1 */ -#define GPIOx_RR2 0x24 /* GPIO Receive Register 2 */ -#define GPIOx_RR3 0x28 /* GPIO Receive Register 3 */ -#define GPIOx_IS1L 0x30 /* GPIO Input Select Register 1 (Bits 0-31) */ -#define GPIOx_IS1H 0x34 /* GPIO Input Select Register 1 (Bits 32-63) */ -#define GPIOx_IS2L 0x38 /* GPIO Input Select Register 2 (Bits 0-31) */ -#define GPIOx_IS2H 0x3C /* GPIO Input Select Register 2 (Bits 32-63) */ -#define GPIOx_IS3L 0x40 /* GPIO Input Select Register 3 (Bits 0-31) */ -#define GPIOx_IS3H 0x44 /* GPIO Input Select Register 3 (Bits 32-63) */ - -/* GPIO0 */ -#define GPIO0_IS1L (GPIO0_BASE+GPIOx_IS1L) -#define GPIO0_IS1H (GPIO0_BASE+GPIOx_IS1H) -#define GPIO0_IS2L (GPIO0_BASE+GPIOx_IS2L) -#define GPIO0_IS2H (GPIO0_BASE+GPIOx_IS2H) -#define GPIO0_IS3L (GPIO0_BASE+GPIOx_IS3L) -#define GPIO0_IS3H (GPIO0_BASE+GPIOx_IS3L) - -/* GPIO1 */ -#define GPIO1_IS1L (GPIO1_BASE+GPIOx_IS1L) -#define GPIO1_IS1H (GPIO1_BASE+GPIOx_IS1H) -#define GPIO1_IS2L (GPIO1_BASE+GPIOx_IS2L) -#define GPIO1_IS2H (GPIO1_BASE+GPIOx_IS2H) -#define GPIO1_IS3L (GPIO1_BASE+GPIOx_IS3L) -#define GPIO1_IS3H (GPIO1_BASE+GPIOx_IS3L) - -#define GPIO_OS(x) (x+GPIOx_OSL) /* GPIO Output Register High or Low */ -#define GPIO_TS(x) (x+GPIOx_TSL) /* GPIO Three-state Control Reg High or Low */ -#define GPIO_IS1(x) (x+GPIOx_IS1L) /* GPIO Input register1 High or Low */ -#define GPIO_IS2(x) (x+GPIOx_IS2L) /* GPIO Input register2 High or Low */ -#define GPIO_IS3(x) (x+GPIOx_IS3L) /* GPIO Input register3 High or Low */ - - -/*----------------------------------------------------------------------------+ - | XX XX - | - | XXXXXX XXX XX XXX XXX - | XX XX X XX XX XX - | XX XX X XX XX XX - | XX XX XX XX XX - | XXXXXX XXX XXX XXXX XXXX - +----------------------------------------------------------------------------*/ -/*----------------------------------------------------------------------------+ - | Defines - +----------------------------------------------------------------------------*/ -typedef enum zmii_config { ZMII_CONFIGURATION_UNKNOWN, - ZMII_CONFIGURATION_IS_MII, - ZMII_CONFIGURATION_IS_RMII, - ZMII_CONFIGURATION_IS_SMII -} zmii_config_t; - -/*----------------------------------------------------------------------------+ - | Declare Configuration values - +----------------------------------------------------------------------------*/ -typedef enum uart_config_nb { L1, L2, L3, L4 } uart_config_nb_t; -typedef enum core_selection { CORE_NOT_SELECTED, CORE_SELECTED} core_selection_t; -typedef enum config_list { IIC_CORE, - SCP_CORE, - DMA_CHANNEL_AB, - UIC_4_9, - USB2_HOST, - DMA_CHANNEL_CD, - USB2_DEVICE, - PACKET_REJ_FUNC_AVAIL, - USB1_DEVICE, - EBC_MASTER, - NAND_FLASH, - UART_CORE0, - UART_CORE1, - UART_CORE2, - UART_CORE3, - MII_SEL, - RMII_SEL, - SMII_SEL, - PACKET_REJ_FUNC_EN, - UIC_0_3, - USB1_HOST, - PCI_PATCH, - CORE_NB -} core_list_t; - -typedef enum block3_value { B3_V1, B3_V2, B3_V3, B3_V4, B3_V5, - B3_V6, B3_V7, B3_V8, B3_V9, B3_V10, - B3_V11, B3_V12, B3_V13, B3_V14, B3_V15, - B3_V16, B3_VALUE_UNKNOWN -} block3_value_t; - -typedef enum config_validity { CONFIG_IS_VALID, - CONFIG_IS_INVALID -} config_validity_t; diff --git a/board/amcc/bamboo/config.mk b/board/amcc/bamboo/config.mk deleted file mode 100644 index 9cb071e..0000000 --- a/board/amcc/bamboo/config.mk +++ /dev/null @@ -1,16 +0,0 @@ -# -# (C) Copyright 2002-2010 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif diff --git a/board/amcc/bamboo/flash.c b/board/amcc/bamboo/flash.c deleted file mode 100644 index 6dbe09f..0000000 --- a/board/amcc/bamboo/flash.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * (C) Copyright 2004-2005 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * (C) Copyright 2002 Jun Gu <jung(a)artesyncp.com> - * Add support for Am29F016D and dynamic switch setting. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Modified 4/5/2001 - * Wait for completion of each sector erase command issued - * 4/5/2001 - * Chris Hallinan - DS4.COM, Inc. - clh(a)net1plus.com - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/processor.h> -#include <asm/ppc440.h> -#include "bamboo.h" - -#undef DEBUG - -#ifdef DEBUG -#define DEBUGF(x...) printf(x) -#else -#define DEBUGF(x...) -#endif /* DEBUG */ - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* - * Mark big flash bank (16 bit instead of 8 bit access) in address with bit 0 - */ -static unsigned long flash_addr_table[][CONFIG_SYS_MAX_FLASH_BANKS] = { - {0x87800001, 0xFFF00000, 0xFFF80000}, /* 0:boot from small flash */ - {0x00000000, 0x00000000, 0x00000000}, /* 1:boot from pci 66 */ - {0x87800001, 0x00000000, 0x00000000}, /* 0:boot from nand flash */ - {0x87F00000, 0x87F80000, 0xFFC00001}, /* 3:boot from big flash 33*/ - {0x87F00000, 0x87F80000, 0xFFC00001}, /* 4:boot from big flash 66*/ - {0x00000000, 0x00000000, 0x00000000}, /* 5:boot from */ - {0x00000000, 0x00000000, 0x00000000}, /* 6:boot from pci 66 */ - {0x00000000, 0x00000000, 0x00000000}, /* 7:boot from */ - {0x87C00001, 0xFFF00000, 0xFFF80000}, /* 0:boot from small flash */ -}; - -/* - * include common flash code (for amcc boards) - */ -#include "../common/flash.c" - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(vu_long * addr, flash_info_t * info); -static int write_word(flash_info_t * info, ulong dest, ulong data); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init(void) -{ - unsigned long total_b = 0; - unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS]; - unsigned short index = 0; - int i; - unsigned long val; - unsigned long ebc_boot_size; - unsigned long boot_selection; - - mfsdr(SDR0_PINSTP, val); - index = (val & SDR0_PSTRP0_BOOTSTRAP_MASK) >> 29; - - if ((index == 5) || (index == 7)) { - /* - * Boot Settings in IIC EEprom address 0xA8 or 0xA4 - * Read Serial Device Strap Register1 in PPC440EP - */ - mfsdr(SDR0_SDSTP1, val); - boot_selection = val & SDR0_SDSTP1_BOOT_SEL_MASK; - ebc_boot_size = val & SDR0_SDSTP1_EBC_ROM_BS_MASK; - - switch(boot_selection) { - case SDR0_SDSTP1_BOOT_SEL_EBC: - switch(ebc_boot_size) { - case SDR0_SDSTP1_EBC_ROM_BS_16BIT: - index = 3; - break; - case SDR0_SDSTP1_EBC_ROM_BS_8BIT: - index = 0; - break; - } - break; - - case SDR0_SDSTP1_BOOT_SEL_PCI: - index = 1; - break; - - case SDR0_SDSTP1_BOOT_SEL_NDFC: - index = 2; - break; - } - } else if (index == 0) { - if (in8(FPGA_SETTING_REG) & FPGA_SET_REG_OP_CODE_FLASH_ABOVE) { - index = 8; /* sram below op code flash -> new index 8 */ - } - } - - DEBUGF("\n"); - DEBUGF("FLASH: Index: %d\n", index); - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].sector_count = -1; - flash_info[i].size = 0; - - /* check whether the address is 0 */ - if (flash_addr_table[index][i] == 0) - continue; - - DEBUGF("Detection bank %d...\n", i); - /* call flash_get_size() to initialize sector address */ - size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i], - &flash_info[i]); - flash_info[i].size = size_b[i]; - if (flash_info[i].flash_id == FLASH_UNKNOWN) { - printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", - i, size_b[i], size_b[i] << 20); - flash_info[i].sector_count = -1; - flash_info[i].size = 0; - } - - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1, - &flash_info[i]); -#if defined(CONFIG_ENV_IS_IN_FLASH) - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[i]); -#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR_REDUND) - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[i]); -#endif -#endif - - total_b += flash_info[i].size; - } - - return total_b; -} diff --git a/board/amcc/bamboo/init.S b/board/amcc/bamboo/init.S deleted file mode 100644 index 5c7c839..0000000 --- a/board/amcc/bamboo/init.S +++ /dev/null @@ -1,55 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * Copyright (C) 2002 Scott McNutt <smcnutt(a)artesyncp.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm-offsets.h> -#include <ppc_asm.tmpl> -#include <config.h> -#include <asm/mmu.h> - -/************************************************************************** - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - *************************************************************************/ - .section .bootpg,"ax" - .globl tlbtab - -tlbtab: - tlbtab_start - - /* - * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the - * speed up boot process. It is patched after relocation to enable SA_I - */ - tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 0, AC_RWX | SA_G) - - /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G) - - /* PCI base & peripherals */ - tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, CONFIG_SYS_PCI_BASE, 0, AC_RW | SA_IG) - - tlbentry(CONFIG_SYS_NVRAM_BASE_ADDR, SZ_256M, CONFIG_SYS_NVRAM_BASE_ADDR, 0, AC_RWX | SA_W|SA_I) - tlbentry(CONFIG_SYS_NAND_ADDR, SZ_4K, CONFIG_SYS_NAND_ADDR, 0, AC_RWX | SA_W|SA_I) - - /* PCI */ - tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 0, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 0, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 0, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 0, AC_RW | SA_IG) - - /* USB 2.0 Device */ - tlbentry(CONFIG_SYS_USB_DEVICE, SZ_1K, CONFIG_SYS_USB_DEVICE, 0, AC_RW | SA_IG) - - tlbtab_end diff --git a/board/amcc/bubinga/Kconfig b/board/amcc/bubinga/Kconfig deleted file mode 100644 index 540d9b6..0000000 --- a/board/amcc/bubinga/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_BUBINGA - -config SYS_BOARD - default "bubinga" - -config SYS_VENDOR - default "amcc" - -config SYS_CONFIG_NAME - default "bubinga" - -endif diff --git a/board/amcc/bubinga/MAINTAINERS b/board/amcc/bubinga/MAINTAINERS deleted file mode 100644 index 3299cc3..0000000 --- a/board/amcc/bubinga/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -BUBINGA BOARD -#M: - -S: Maintained -F: board/amcc/bubinga/ -F: include/configs/bubinga.h -F: configs/bubinga_defconfig diff --git a/board/amcc/bubinga/Makefile b/board/amcc/bubinga/Makefile deleted file mode 100644 index 0e7ebca..0000000 --- a/board/amcc/bubinga/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = bubinga.o flash.o diff --git a/board/amcc/bubinga/bubinga.c b/board/amcc/bubinga/bubinga.c deleted file mode 100644 index 5c1e071..0000000 --- a/board/amcc/bubinga/bubinga.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * (C) Copyright 2000-2005 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/processor.h> -#include <asm/io.h> - -long int spd_sdram(void); - -int board_early_init_f(void) -{ - mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ - mtdcr(UIC0ER, 0x00000000); /* disable all ints */ - mtdcr(UIC0CR, 0x00000010); - mtdcr(UIC0PR, 0xFFFF7FF0); /* set int polarities */ - mtdcr(UIC0TR, 0x00000010); /* set int trigger levels */ - mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ - - /* - * Configure CPC0_PCI to enable PerWE as output - * and enable the internal PCI arbiter if selected - */ - if (in_8((void *)FPGA_REG1) & FPGA_REG1_PCI_INT_ARB) - mtdcr(CPC0_PCI, CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN); - else - mtdcr(CPC0_PCI, CPC0_PCI_HOST_CFG_EN); - - return 0; -} - -/* - * Check Board Identity: - */ -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - puts("Board: Bubinga - AMCC PPC405EP Evaluation Board"); - - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - return (0); -} - -/* ------------------------------------------------------------------------- - initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of - the necessary info for SDRAM controller configuration - ------------------------------------------------------------------------- */ -phys_size_t initdram(int board_type) -{ - long int ret; - - ret = spd_sdram(); - return ret; -} diff --git a/board/amcc/bubinga/flash.c b/board/amcc/bubinga/flash.c deleted file mode 100644 index a9d0ed8..0000000 --- a/board/amcc/bubinga/flash.c +++ /dev/null @@ -1,188 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Modified 4/5/2001 - * Wait for completion of each sector erase command issued - * 4/5/2001 - * Chris Hallinan - DS4.COM, Inc. - clh(a)net1plus.com - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/processor.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -#undef DEBUG -#ifdef DEBUG -#define DEBUGF(x...) printf(x) -#else -#define DEBUGF(x...) -#endif /* DEBUG */ - -/* - * include common flash code (for amcc boards) - */ -#include "../common/flash.c" - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(vu_long * addr, flash_info_t * info); -static void flash_get_offsets(ulong base, flash_info_t * info); - -unsigned long flash_init(void) -{ - unsigned long size_b0, size_b1; - int i; - uint pbcr; - unsigned long base_b0, base_b1; - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - - size_b0 = - flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0 << 20); - } - - /* Only one bank */ - if (CONFIG_SYS_MAX_FLASH_BANKS == 1) { - /* Setup offsets */ - flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]); - - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1, - &flash_info[0]); -#ifdef CONFIG_ENV_IS_IN_FLASH - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); -#endif - - size_b1 = 0; - flash_info[0].size = size_b0; - } - - /* 2 banks */ - else { - size_b1 = - flash_get_size((vu_long *) FLASH_BASE1_PRELIM, - &flash_info[1]); - - /* Re-do sizing to get full correct info */ - - if (size_b1) { - mtdcr(EBC0_CFGADDR, PB0CR); - pbcr = mfdcr(EBC0_CFGDATA); - mtdcr(EBC0_CFGADDR, PB0CR); - base_b1 = -size_b1; - pbcr = (pbcr & 0x0001ffff) | base_b1 | - (((size_b1 / 1024 / 1024) - 1) << 17); - mtdcr(EBC0_CFGDATA, pbcr); - /* printf("PB1CR = %x\n", pbcr); */ - } - - if (size_b0) { - mtdcr(EBC0_CFGADDR, PB1CR); - pbcr = mfdcr(EBC0_CFGDATA); - mtdcr(EBC0_CFGADDR, PB1CR); - base_b0 = base_b1 - size_b0; - pbcr = (pbcr & 0x0001ffff) | base_b0 | - (((size_b0 / 1024 / 1024) - 1) << 17); - mtdcr(EBC0_CFGDATA, pbcr); - /* printf("PB0CR = %x\n", pbcr); */ - } - - size_b0 = flash_get_size((vu_long *) base_b0, &flash_info[0]); - - flash_get_offsets(base_b0, &flash_info[0]); - - /* monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - base_b0 + size_b0 - CONFIG_SYS_MONITOR_LEN, - base_b0 + size_b0 - 1, &flash_info[0]); - /* Also protect sector containing initial power-up instruction */ - /* (flash_protect() checks address range - other call ignored) */ - (void)flash_protect(FLAG_PROTECT_SET, - 0xFFFFFFFC, 0xFFFFFFFF, &flash_info[0]); - (void)flash_protect(FLAG_PROTECT_SET, - 0xFFFFFFFC, 0xFFFFFFFF, &flash_info[1]); - - if (size_b1) { - /* Re-do sizing to get full correct info */ - size_b1 = - flash_get_size((vu_long *) base_b1, &flash_info[1]); - - flash_get_offsets(base_b1, &flash_info[1]); - - /* monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - base_b1 + size_b1 - CONFIG_SYS_MONITOR_LEN, - base_b1 + size_b1 - 1, - &flash_info[1]); - /* monitor protection OFF by default (one is enough) */ - (void)flash_protect(FLAG_PROTECT_CLEAR, - base_b0 + size_b0 - CONFIG_SYS_MONITOR_LEN, - base_b0 + size_b0 - 1, - &flash_info[0]); - } else { - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[1].sector_count = -1; - } - - flash_info[0].size = size_b0; - flash_info[1].size = size_b1; - } /* else 2 banks */ - return (size_b0 + size_b1); -} - -static void flash_get_offsets(ulong base, flash_info_t * info) -{ - int i; - - /* set up sector start address table */ - if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || - (info->flash_id == FLASH_AM040)) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000); - } else { - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = - base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - } -} diff --git a/board/amcc/ebony/Kconfig b/board/amcc/ebony/Kconfig deleted file mode 100644 index 62394b6..0000000 --- a/board/amcc/ebony/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_EBONY - -config SYS_BOARD - default "ebony" - -config SYS_VENDOR - default "amcc" - -config SYS_CONFIG_NAME - default "ebony" - -endif diff --git a/board/amcc/ebony/MAINTAINERS b/board/amcc/ebony/MAINTAINERS deleted file mode 100644 index bc62851..0000000 --- a/board/amcc/ebony/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -EBONY BOARD -M: Stefan Roese <sr(a)denx.de> -S: Maintained -F: board/amcc/ebony/ -F: include/configs/ebony.h -F: configs/ebony_defconfig diff --git a/board/amcc/ebony/Makefile b/board/amcc/ebony/Makefile deleted file mode 100644 index 5876486..0000000 --- a/board/amcc/ebony/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2002-2006 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = ebony.o flash.o -extra-y += init.o diff --git a/board/amcc/ebony/README b/board/amcc/ebony/README deleted file mode 100644 index 4df00b3..0000000 --- a/board/amcc/ebony/README +++ /dev/null @@ -1,136 +0,0 @@ - AMCC Ebony Board - - Last Update: September 12, 2002 -======================================================================= - -This file contains some handy info regarding U-Boot and the AMCC -Ebony evaluation board. See the README.ppc440 for additional -information. - - -SWITCH SETTINGS & JUMPERS -========================== - -Here's what I've been using successfully. If you feel inclined to -change things ... please read the docs! - -DIPSW U46 U80 ------------------------- -SW 1 off on -SW 2 on on -SW 3 on on -SW 4 off on -SW 5 on off -SW 6 on on -SW 7 on off -SW 8 on off - -J41: strapped -J42: open - -All others are factory default. - - -I2C probe -===================== - -The i2c utilities have been tested on both Rev B. and Rev C. and -look good. The CONFIG_SYS_I2C_NOPROBES macro is defined to prevent -probing the CDCV850 clock controller at address 0x69 (since reading -it causes the i2c implementation to misbehave. The output of -'i2c probe' should look like this (assuming you are only using a single -SO-DIMM: - -=> i2c probe -Valid chip addresses: 50 53 54 -Excluded chip addresses: 69 - - -GETTING OUT OF I2C TROUBLE -=========================== - -If you're like me ... you may have screwed up your bootstrap serial -eeprom ... or worse, your SPD eeprom when experimenting with the -i2c commands. If so, here are some ideas on how to get out of -trouble: - -Serial bootstrap eeprom corruption: ------------------------------------ -Power down the board and set the following straps: - -J41 - open -J42 - strapped - -This will select the default sys0 and sys1 settings (the serial -eeproms are not used). Then power up the board and fix the serial -eeprom using the 'i2c mm' command. Here are the values I currently -use: - -=> i2c md 50 0 10 -0000: bf a2 04 01 ae 94 11 00 00 00 00 00 00 00 00 00 ................ - -=> i2c md 54 0 10 -0000: 8f b3 24 01 4d 14 11 00 00 00 00 00 00 00 00 00 ..$.M........... - -Once you have the eeproms set correctly change the -J41/J42 straps as you desire. - -SPD eeprom corruption: ------------------------- -I've corrupted the SPD eeprom several times ... perhaps too much coffee -and not enough presence of mind ;-). By default, the ebony code uses -the SPD to initialize the DDR SDRAM control registers. So if the SPD -eeprom is corrupted, U-Boot will never get into ram. Here's how I got -out of this situation: - -0. First, _before_ playing with the i2c utilities, do an 'i2c probe', then -use 'i2c md' to capture the various device contents to a file. Some day -you may be glad you did this ... trust me :-). Otherwise try the -following: - -1. In the include/configs/EBONY.h file find the line that defines -the CONFIG_SPD_EEPROM macro and undefine it. E.g: - -#undef CONFIG_SPD_EEPROM - -This will make the code use default SDRAM control register -settings without using the SPD eeprom. - -2. Rebuild U-Boot - -3. Load the new U-Boot image and reboot ebony. - -4. Repair the SPD eeprom using the 'i2c mm' command. Here's the eeprom -contents that work with the default SO-DIMM that comes with the -ebony board (micron 8VDDT164AG-265A1). Note: these are probably -_not_ the factory settings ... but they work. - -=> i2c md 53 0 10 80 -0000: 80 08 07 0c 0a 01 40 00 04 75 75 00 80 08 00 01 ......@..uu..... -0010: 0e 04 0c 01 02 20 00 a0 75 00 00 50 3c 50 2d 20 ..... ..u..P<P- -0020: 90 90 50 50 00 00 00 00 00 41 4b 34 32 75 00 00 ..PP.....AK42u.. -0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 9c ................ -0040: 2c 00 00 00 00 00 00 00 08 38 56 44 44 54 31 36 ,........8VDDT16 -0050: 36 34 41 47 2d 32 36 35 41 31 20 01 00 01 2c 63 64AG-265A1 ...,c -0060: 22 25 ab 00 00 00 00 00 00 00 00 00 00 00 00 00 "%.............. -0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ - - -PCI DOUBLE-ENUMERATION WOES -=========================== - -If you're not using PCI-X cards and are simply using 32-bit and/or -33 MHz cards via extenders and the like, you may notice that the -initial pci scan reports various devices twice ... and configuration -does not succeed (one or more devices are enumerated twice). To correct -this we replaced the 2K ohm resistor on the IDSEL line(s) with a -22 ohm resistor and the problem went away. This change hasn't broken -anything yet -- use at your own risk. - -We never tested anything other than 33 MHz/32-bit cards. If you have -the chance to do this, please let me know how things turn out :-) - - -Regards, ---Scott -<smcnutt(a)artesyncp.com> diff --git a/board/amcc/ebony/config.mk b/board/amcc/ebony/config.mk deleted file mode 100644 index f18b097..0000000 --- a/board/amcc/ebony/config.mk +++ /dev/null @@ -1,16 +0,0 @@ -# -# (C) Copyright 2002 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif diff --git a/board/amcc/ebony/ebony.c b/board/amcc/ebony/ebony.c deleted file mode 100644 index eb42448..0000000 --- a/board/amcc/ebony/ebony.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * Copyright (C) 2002 Scott McNutt <smcnutt(a)artesyncp.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/processor.h> -#include <spd_sdram.h> - -#define BOOT_SMALL_FLASH 32 /* 00100000 */ -#define FLASH_ONBD_N 2 /* 00000010 */ -#define FLASH_SRAM_SEL 1 /* 00000001 */ - -DECLARE_GLOBAL_DATA_PTR; - -long int fixed_sdram(void); - -int board_early_init_f(void) -{ - uint reg; - unsigned char *fpga_base = (unsigned char *)CONFIG_SYS_FPGA_BASE; - unsigned char status; - - /*-------------------------------------------------------------------- - * Setup the external bus controller/chip selects - *-------------------------------------------------------------------*/ - mtdcr(EBC0_CFGADDR, EBC0_CFG); - reg = mfdcr(EBC0_CFGDATA); - mtdcr(EBC0_CFGDATA, reg | 0x04000000); /* Set ATC */ - - mtebc(PB1AP, 0x02815480); /* NVRAM/RTC */ - mtebc(PB1CR, 0x48018000); /* BA=0x480 1MB R/W 8-bit */ - mtebc(PB7AP, 0x01015280); /* FPGA registers */ - mtebc(PB7CR, 0x48318000); /* BA=0x483 1MB R/W 8-bit */ - - /* read FPGA_REG0 and set the bus controller */ - status = *fpga_base; - if ((status & BOOT_SMALL_FLASH) && !(status & FLASH_ONBD_N)) { - mtebc(PB0AP, 0x9b015480); /* FLASH/SRAM */ - mtebc(PB0CR, 0xfff18000); /* BAS=0xfff 1MB R/W 8-bit */ - mtebc(PB2AP, 0x9b015480); /* 4MB FLASH */ - mtebc(PB2CR, 0xff858000); /* BAS=0xff8 4MB R/W 8-bit */ - } else { - mtebc(PB0AP, 0x9b015480); /* 4MB FLASH */ - mtebc(PB0CR, 0xffc58000); /* BAS=0xffc 4MB R/W 8-bit */ - - /* set CS2 if FLASH_ONBD_N == 0 */ - if (!(status & FLASH_ONBD_N)) { - mtebc(PB2AP, 0x9b015480); /* FLASH/SRAM */ - mtebc(PB2CR, 0xff818000); /* BAS=0xff8 4MB R/W 8-bit */ - } - } - - /*-------------------------------------------------------------------- - * Setup the interrupt controller polarities, triggers, etc. - *-------------------------------------------------------------------*/ - mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(UIC0ER, 0x00000000); /* disable all */ - mtdcr(UIC0CR, 0x00000009); /* SMI & UIC1 crit are critical */ - mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */ - mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */ - mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(UIC0SR, 0xffffffff); /* clear all */ - - mtdcr(UIC1SR, 0xffffffff); /* clear all */ - mtdcr(UIC1ER, 0x00000000); /* disable all */ - mtdcr(UIC1CR, 0x00000000); /* all non-critical */ - mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */ - mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */ - mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(UIC1SR, 0xffffffff); /* clear all */ - - return 0; -} - -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - printf("Board: Ebony - AMCC PPC440GP Evaluation Board"); - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - return (0); -} - -phys_size_t initdram(int board_type) -{ - long dram_size = 0; - -#if defined(CONFIG_SPD_EEPROM) - dram_size = spd_sdram(); -#else - dram_size = fixed_sdram(); -#endif - return dram_size; -} - -#if !defined(CONFIG_SPD_EEPROM) -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - * - * Assumes: 128 MB, non-ECC, non-registered - * PLB @ 133 MHz - * - ************************************************************************/ -long int fixed_sdram(void) -{ - uint reg; - - /*-------------------------------------------------------------------- - * Setup some default - *------------------------------------------------------------------*/ - mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */ - mtsdram(SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ - mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */ - mtsdram(SDRAM0_WDDCTR, 0x00000000); /* wrcp=0 dcd=0 */ - mtsdram(SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ - - /*-------------------------------------------------------------------- - * Setup for board-specific specific mem - *------------------------------------------------------------------*/ - /* - * Following for CAS Latency = 2.5 @ 133 MHz PLB - */ - mtsdram(SDRAM0_B0CR, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */ - mtsdram(SDRAM0_TR0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */ - /* RA=10 RD=3 */ - mtsdram(SDRAM0_TR1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */ - mtsdram(SDRAM0_RTR, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */ - mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM */ - udelay(400); /* Delay 200 usecs (min) */ - - /*-------------------------------------------------------------------- - * Enable the controller, then wait for DCEN to complete - *------------------------------------------------------------------*/ - mtsdram(SDRAM0_CFG0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */ - for (;;) { - mfsdram(SDRAM0_MCSTS, reg); - if (reg & 0x80000000) - break; - } - - return (128 * 1024 * 1024); /* 128 MB */ -} -#endif /* !defined(CONFIG_SPD_EEPROM) */ diff --git a/board/amcc/ebony/flash.c b/board/amcc/ebony/flash.c deleted file mode 100644 index 5740a56..0000000 --- a/board/amcc/ebony/flash.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * (C) Copyright 2002 Jun Gu <jung(a)artesyncp.com> - * Add support for Am29F016D and dynamic switch setting. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Modified 4/5/2001 - * Wait for completion of each sector erase command issued - * 4/5/2001 - * Chris Hallinan - DS4.COM, Inc. - clh(a)net1plus.com - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/processor.h> -#include <asm/io.h> - -#undef DEBUG -#ifdef DEBUG -#define DEBUGF(x...) printf(x) -#else -#define DEBUGF(x...) -#endif /* DEBUG */ - -#define BOOT_SMALL_FLASH 32 /* 00100000 */ -#define FLASH_ONBD_N 2 /* 00000010 */ -#define FLASH_SRAM_SEL 1 /* 00000001 */ - -#define BOOT_SMALL_FLASH_VAL 4 -#define FLASH_ONBD_N_VAL 2 -#define FLASH_SRAM_SEL_VAL 1 - -static unsigned long flash_addr_table[8][CONFIG_SYS_MAX_FLASH_BANKS] = { - {0xffc00000, 0xffe00000, 0xff880000}, /* 0:000: configuraton 3 */ - {0xffc00000, 0xffe00000, 0xff800000}, /* 1:001: configuraton 4 */ - {0xffc00000, 0xffe00000, 0x00000000}, /* 2:010: configuraton 7 */ - {0xffc00000, 0xffe00000, 0x00000000}, /* 3:011: configuraton 8 */ - {0xff800000, 0xffa00000, 0xfff80000}, /* 4:100: configuraton 1 */ - {0xff800000, 0xffa00000, 0xfff00000}, /* 5:101: configuraton 2 */ - {0xffc00000, 0xffe00000, 0x00000000}, /* 6:110: configuraton 5 */ - {0xffc00000, 0xffe00000, 0x00000000} /* 7:111: configuraton 6 */ -}; - -/* - * include common flash code (for amcc boards) - */ -#include "../common/flash.c" - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(vu_long * addr, flash_info_t * info); - -/* - * Override the weak default mapping function with a board specific one - */ -u32 flash_get_bank_size(int cs, int idx) -{ - u8 reg = in_8((void *)CONFIG_SYS_FPGA_BASE); - - if ((reg & BOOT_SMALL_FLASH) && !(reg & FLASH_ONBD_N)) { - /* - * cs0: small flash (512KiB) - * cs2: 2 * big flash (2 * 2MiB) - */ - if (cs == 0) - return flash_info[2].size; - if (cs == 2) - return flash_info[0].size + flash_info[1].size; - } else { - /* - * cs0: 2 * big flash (2 * 2MiB) - * cs2: small flash (512KiB) - */ - if (cs == 0) - return flash_info[0].size + flash_info[1].size; - if (cs == 2) - return flash_info[2].size; - } - - return 0; -} - -unsigned long flash_init(void) -{ - unsigned long total_b = 0; - unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS]; - unsigned char *fpga_base = (unsigned char *)CONFIG_SYS_FPGA_BASE; - unsigned char switch_status; - unsigned short index = 0; - int i; - - /* read FPGA base register FPGA_REG0 */ - switch_status = *fpga_base; - - /* check the bitmap of switch status */ - if (switch_status & BOOT_SMALL_FLASH) { - index += BOOT_SMALL_FLASH_VAL; - } - if (switch_status & FLASH_ONBD_N) { - index += FLASH_ONBD_N_VAL; - } - if (switch_status & FLASH_SRAM_SEL) { - index += FLASH_SRAM_SEL_VAL; - } - - DEBUGF("\n"); - DEBUGF("FLASH: Index: %d\n", index); - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].sector_count = -1; - flash_info[i].size = 0; - - /* check whether the address is 0 */ - if (flash_addr_table[index][i] == 0) { - continue; - } - - /* call flash_get_size() to initialize sector address */ - size_b[i] = flash_get_size((vu_long *) - flash_addr_table[index][i], - &flash_info[i]); - flash_info[i].size = size_b[i]; - if (flash_info[i].flash_id == FLASH_UNKNOWN) { - printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", - i, size_b[i], size_b[i] << 20); - flash_info[i].sector_count = -1; - flash_info[i].size = 0; - } - - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1, - &flash_info[2]); -#ifdef CONFIG_ENV_IS_IN_FLASH - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[2]); - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[2]); -#endif - - total_b += flash_info[i].size; - } - - return total_b; -} diff --git a/board/amcc/ebony/init.S b/board/amcc/ebony/init.S deleted file mode 100644 index 904e648..0000000 --- a/board/amcc/ebony/init.S +++ /dev/null @@ -1,41 +0,0 @@ -/* -* Copyright (C) 2002 Scott McNutt <smcnutt(a)artesyncp.com> - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <ppc_asm.tmpl> -#include <config.h> -#include <asm/mmu.h> -#include <asm/ppc4xx.h> - -/************************************************************************** - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - *************************************************************************/ - - .section .bootpg,"ax" - .globl tlbtab - -tlbtab: - tlbtab_start - - tlbentry(0xf0000000, SZ_256M, 0xf0000000, 1, AC_RWX | SA_IG) - - /* - * TLB entries for SDRAM are not needed on this platform. - * They are dynamically generated in the SPD DDR(2) detection - * routine. - */ - - tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_RWX) - tlbentry(CONFIG_SYS_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_RWX) - tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_RW | SA_IG) - tlbtab_end diff --git a/board/amcc/katmai/Kconfig b/board/amcc/katmai/Kconfig deleted file mode 100644 index fc606cf..0000000 --- a/board/amcc/katmai/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_KATMAI - -config SYS_BOARD - default "katmai" - -config SYS_VENDOR - default "amcc" - -config SYS_CONFIG_NAME - default "katmai" - -endif diff --git a/board/amcc/katmai/MAINTAINERS b/board/amcc/katmai/MAINTAINERS deleted file mode 100644 index f089352..0000000 --- a/board/amcc/katmai/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -KATMAI BOARD -M: Stefan Roese <sr(a)denx.de> -S: Maintained -F: board/amcc/katmai/ -F: include/configs/katmai.h -F: configs/katmai_defconfig diff --git a/board/amcc/katmai/Makefile b/board/amcc/katmai/Makefile deleted file mode 100644 index b738def..0000000 --- a/board/amcc/katmai/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2007 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := katmai.o -obj-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o -extra-y += init.o diff --git a/board/amcc/katmai/chip_config.c b/board/amcc/katmai/chip_config.c deleted file mode 100644 index 5e711c4..0000000 --- a/board/amcc/katmai/chip_config.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2009 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/ppc4xx_config.h> - -struct ppc4xx_config ppc4xx_config_val[] = { - { - "400-133","CPU: 400 PLB: 133 OPB: 66 EBC: 66", - { 0x86, 0x78, 0xc2, 0xc6, 0x05, 0xa5, 0x04, 0xe1 } - }, - { - "500-166","CPU: 500 PLB: 166 OPB: 83 EBC: 83", - { 0x87, 0x78, 0xf2, 0xc6, 0x05, 0xa5, 0x04, 0xe1 } - }, - { - "533-133","CPU: 533 PLB: 133 OPB: 66 EBC: 66", - { 0x87, 0x79, 0x02, 0x52, 0x05, 0xa5, 0x04, 0xe1 } - }, - { - "667-133","CPU: 667 PLB: 133 OPB: 66 EBC: 66", - { 0x87, 0x79, 0x42, 0x56, 0x05, 0xa5, 0x04, 0xe1 } - }, - { - "667-166","CPU: 667 PLB: 166 OPB: 83 EBC: 83", - { 0x87, 0x79, 0x42, 0x06, 0x05, 0xa5, 0x04, 0xe1 } - }, - { - "800-160","CPU: 800 PLB: 160 OPB: 53 EBC: 17", - { 0x86, 0x79, 0x81, 0xa7, 0x07, 0xa5, 0x04, 0xe1 } - }, -}; - -int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val); diff --git a/board/amcc/katmai/config.mk b/board/amcc/katmai/config.mk deleted file mode 100644 index 6108f79..0000000 --- a/board/amcc/katmai/config.mk +++ /dev/null @@ -1,20 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# AMCC 440SPe Evaluation (Katmai) board -# - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif diff --git a/board/amcc/katmai/init.S b/board/amcc/katmai/init.S deleted file mode 100644 index 32f2667..0000000 --- a/board/amcc/katmai/init.S +++ /dev/null @@ -1,103 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * Copyright (C) 2002 Scott McNutt <smcnutt(a)artesyncp.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <ppc_asm.tmpl> -#include <config.h> -#include <asm/mmu.h> -#include <asm/ppc4xx.h> - -/************************************************************************** - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - *************************************************************************/ - - .section .bootpg,"ax" - -/************************************************************************** - * TLB table for revA - *************************************************************************/ - .globl tlbtabA -tlbtabA: - tlbtab_start - - /* - * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the - * speed up boot process. It is patched after relocation to enable SA_I - */ - tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_RWX | SA_G) - - /* - * TLB entries for SDRAM are not needed on this platform. - * They are dynamically generated in the SPD DDR(2) detection - * routine. - */ - - tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_RWX | SA_I) - tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_RW | SA_IG) - - tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_RW | SA_IG) - - tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_RW | SA_IG) - tlbtab_end - -/************************************************************************** - * TLB table for revB - * - * Notice: revB of the 440SPe chip is very strict about PLB real addresses - * and ranges to be mapped for config space: it seems to only work with - * d_nnnn_nnnn range (hangs the core upon config transaction attempts when - * set otherwise) while revA uses c_nnnn_nnnn. - *************************************************************************/ - .globl tlbtabB -tlbtabB: - tlbtab_start - - /* - * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the - * speed up boot process. It is patched after relocation to enable SA_I - */ - tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_RWX | SA_G) - - /* - * TLB entries for SDRAM are not needed on this platform. - * They are dynamically generated in the SPD DDR(2) detection - * routine. - */ - - tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_RWX | SA_I) - - tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_RW | SA_IG) - - tlbentry(CONFIG_SYS_ACE_BASE, SZ_1K, CONFIG_SYS_ACE_BASE, 4,AC_RW | SA_IG) - - tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_RW | SA_IG) - - tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_RW | SA_IG) - tlbtab_end diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c deleted file mode 100644 index 6ae340b..0000000 --- a/board/amcc/katmai/katmai.c +++ /dev/null @@ -1,270 +0,0 @@ -/* - * (C) Copyright 2007-2009 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <i2c.h> -#include <libfdt.h> -#include <fdt_support.h> -#include <netdev.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/ppc4xx-gpio.h> -#include <asm/4xx_pcie.h> -#include <asm/errno.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f (void) -{ - unsigned long mfr; - - /*----------------------------------------------------------------------+ - * Interrupt controller setup for the Katmai 440SPe Evaluation board. - *-----------------------------------------------------------------------+ - *-----------------------------------------------------------------------+ - * Interrupt | Source | Pol. | Sensi.| Crit. | - *-----------+-----------------------------------+-------+-------+-------+ - * IRQ 00 | UART0 | High | Level | Non | - * IRQ 01 | UART1 | High | Level | Non | - * IRQ 02 | IIC0 | High | Level | Non | - * IRQ 03 | IIC1 | High | Level | Non | - * IRQ 04 | PCI0X0 MSG IN | High | Level | Non | - * IRQ 05 | PCI0X0 CMD Write | High | Level | Non | - * IRQ 06 | PCI0X0 Power Mgt | High | Level | Non | - * IRQ 07 | PCI0X0 VPD Access | Rising| Edge | Non | - * IRQ 08 | PCI0X0 MSI level 0 | High | Lvl/ed| Non | - * IRQ 09 | External IRQ 15 - (PCI-Express) | pgm H | Pgm | Non | - * IRQ 10 | UIC2 Non-critical Int. | NA | NA | Non | - * IRQ 11 | UIC2 Critical Interrupt | NA | NA | Crit | - * IRQ 12 | PCI Express MSI Level 0 | Rising| Edge | Non | - * IRQ 13 | PCI Express MSI Level 1 | Rising| Edge | Non | - * IRQ 14 | PCI Express MSI Level 2 | Rising| Edge | Non | - * IRQ 15 | PCI Express MSI Level 3 | Rising| Edge | Non | - * IRQ 16 | UIC3 Non-critical Int. | NA | NA | Non | - * IRQ 17 | UIC3 Critical Interrupt | NA | NA | Crit | - * IRQ 18 | External IRQ 14 - (PCI-Express) | Pgm | Pgm | Non | - * IRQ 19 | DMA Channel 0 FIFO Full | High | Level | Non | - * IRQ 20 | DMA Channel 0 Stat FIFO | High | Level | Non | - * IRQ 21 | DMA Channel 1 FIFO Full | High | Level | Non | - * IRQ 22 | DMA Channel 1 Stat FIFO | High | Level | Non | - * IRQ 23 | I2O Inbound Doorbell | High | Level | Non | - * IRQ 24 | Inbound Post List FIFO Not Empt | High | Level | Non | - * IRQ 25 | I2O Region 0 LL PLB Write | High | Level | Non | - * IRQ 26 | I2O Region 1 LL PLB Write | High | Level | Non | - * IRQ 27 | I2O Region 0 HB PLB Write | High | Level | Non | - * IRQ 28 | I2O Region 1 HB PLB Write | High | Level | Non | - * IRQ 29 | GPT Down Count Timer | Rising| Edge | Non | - * IRQ 30 | UIC1 Non-critical Int. | NA | NA | Non | - * IRQ 31 | UIC1 Critical Interrupt | NA | NA | Crit. | - *------------------------------------------------------------------------ - * IRQ 32 | Ext. IRQ 13 - (PCI-Express) |pgm (H)|pgm/Lvl| Non | - * IRQ 33 | MAL Serr | High | Level | Non | - * IRQ 34 | MAL Txde | High | Level | Non | - * IRQ 35 | MAL Rxde | High | Level | Non | - * IRQ 36 | DMC CE or DMC UE | High | Level | Non | - * IRQ 37 | EBC or UART2 | High |Lvl Edg| Non | - * IRQ 38 | MAL TX EOB | High | Level | Non | - * IRQ 39 | MAL RX EOB | High | Level | Non | - * IRQ 40 | PCIX0 MSI Level 1 | High |Lvl Edg| Non | - * IRQ 41 | PCIX0 MSI level 2 | High |Lvl Edg| Non | - * IRQ 42 | PCIX0 MSI level 3 | High |Lvl Edg| Non | - * IRQ 43 | L2 Cache | Risin | Edge | Non | - * IRQ 44 | GPT Compare Timer 0 | Risin | Edge | Non | - * IRQ 45 | GPT Compare Timer 1 | Risin | Edge | Non | - * IRQ 46 | GPT Compare Timer 2 | Risin | Edge | Non | - * IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non | - * IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non | - * IRQ 49 | Ext. IRQ 12 - PCI-X |pgm/Fal|pgm/Lvl| Non | - * IRQ 50 | Ext. IRQ 11 - |pgm (H)|pgm/Lvl| Non | - * IRQ 51 | Ext. IRQ 10 - |pgm (H)|pgm/Lvl| Non | - * IRQ 52 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non | - * IRQ 53 | Ext. IRQ 8 |pgm (H)|pgm/Lvl| Non | - * IRQ 54 | DMA Error | High | Level | Non | - * IRQ 55 | DMA I2O Error | High | Level | Non | - * IRQ 56 | Serial ROM | High | Level | Non | - * IRQ 57 | PCIX0 Error | High | Edge | Non | - * IRQ 58 | Ext. IRQ 7- |pgm (H)|pgm/Lvl| Non | - * IRQ 59 | Ext. IRQ 6- |pgm (H)|pgm/Lvl| Non | - * IRQ 60 | EMAC0 Interrupt | High | Level | Non | - * IRQ 61 | EMAC0 Wake-up | High | Level | Non | - * IRQ 62 | Reserved | High | Level | Non | - * IRQ 63 | XOR | High | Level | Non | - *----------------------------------------------------------------------- - * IRQ 64 | PE0 AL | High | Level | Non | - * IRQ 65 | PE0 VPD Access | Risin | Edge | Non | - * IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non | - * IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non | - * IRQ 68 | PE0 TCR | High | Level | Non | - * IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non | - * IRQ 70 | PE0 DCR Error | High | Level | Non | - * IRQ 71 | Reserved | N/A | N/A | Non | - * IRQ 72 | PE1 AL | High | Level | Non | - * IRQ 73 | PE1 VPD Access | Risin | Edge | Non | - * IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non | - * IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non | - * IRQ 76 | PE1 TCR | High | Level | Non | - * IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non | - * IRQ 78 | PE1 DCR Error | High | Level | Non | - * IRQ 79 | Reserved | N/A | N/A | Non | - * IRQ 80 | PE2 AL | High | Level | Non | - * IRQ 81 | PE2 VPD Access | Risin | Edge | Non | - * IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non | - * IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non | - * IRQ 84 | PE2 TCR | High | Level | Non | - * IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non | - * IRQ 86 | PE2 DCR Error | High | Level | Non | - * IRQ 87 | Reserved | N/A | N/A | Non | - * IRQ 88 | External IRQ(5) | Progr | Progr | Non | - * IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non | - * IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non | - * IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non | - * IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non | - * IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non | - * IRQ 94 | Reserved | N/A | N/A | Non | - * IRQ 95 | Reserved | N/A | N/A | Non | - *----------------------------------------------------------------------- - * IRQ 96 | PE0 INTA | High | Level | Non | - * IRQ 97 | PE0 INTB | High | Level | Non | - * IRQ 98 | PE0 INTC | High | Level | Non | - * IRQ 99 | PE0 INTD | High | Level | Non | - * IRQ 100 | PE1 INTA | High | Level | Non | - * IRQ 101 | PE1 INTB | High | Level | Non | - * IRQ 102 | PE1 INTC | High | Level | Non | - * IRQ 103 | PE1 INTD | High | Level | Non | - * IRQ 104 | PE2 INTA | High | Level | Non | - * IRQ 105 | PE2 INTB | High | Level | Non | - * IRQ 106 | PE2 INTC | High | Level | Non | - * IRQ 107 | PE2 INTD | Risin | Edge | Non | - * IRQ 108 | PCI Express MSI Level 4 | Risin | Edge | Non | - * IRQ 109 | PCI Express MSI Level 5 | Risin | Edge | Non | - * IRQ 110 | PCI Express MSI Level 6 | Risin | Edge | Non | - * IRQ 111 | PCI Express MSI Level 7 | Risin | Edge | Non | - * IRQ 116 | PCI Express MSI Level 12 | Risin | Edge | Non | - * IRQ 112 | PCI Express MSI Level 8 | Risin | Edge | Non | - * IRQ 113 | PCI Express MSI Level 9 | Risin | Edge | Non | - * IRQ 114 | PCI Express MSI Level 10 | Risin | Edge | Non | - * IRQ 115 | PCI Express MSI Level 11 | Risin | Edge | Non | - * IRQ 117 | PCI Express MSI Level 13 | Risin | Edge | Non | - * IRQ 118 | PCI Express MSI Level 14 | Risin | Edge | Non | - * IRQ 119 | PCI Express MSI Level 15 | Risin | Edge | Non | - * IRQ 120 | PCI Express MSI Level 16 | Risin | Edge | Non | - * IRQ 121 | PCI Express MSI Level 17 | Risin | Edge | Non | - * IRQ 122 | PCI Express MSI Level 18 | Risin | Edge | Non | - * IRQ 123 | PCI Express MSI Level 19 | Risin | Edge | Non | - * IRQ 124 | PCI Express MSI Level 20 | Risin | Edge | Non | - * IRQ 125 | PCI Express MSI Level 21 | Risin | Edge | Non | - * IRQ 126 | PCI Express MSI Level 22 | Risin | Edge | Non | - * IRQ 127 | PCI Express MSI Level 23 | Risin | Edge | Non | - *-----------+-----------------------------------+-------+-------+-------+ */ - /*-------------------------------------------------------------------------+ - * Put UICs in PowerPC440SPemode. - * Initialise UIC registers. Clear all interrupts. Disable all interrupts. - * Set critical interrupt values. Set interrupt polarities. Set interrupt - * trigger levels. Make bit 0 High priority. Clear all interrupts again. - *------------------------------------------------------------------------*/ - mtdcr (UIC3SR, 0xffffffff); /* Clear all interrupts */ - mtdcr (UIC3ER, 0x00000000); /* disable all interrupts */ - mtdcr (UIC3CR, 0x00000000); /* Set Critical / Non Critical interrupts: */ - mtdcr (UIC3PR, 0xffffffff); /* Set Interrupt Polarities*/ - mtdcr (UIC3TR, 0x001fffff); /* Set Interrupt Trigger Levels */ - mtdcr (UIC3VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ - mtdcr (UIC3SR, 0x00000000); /* clear all interrupts*/ - mtdcr (UIC3SR, 0xffffffff); /* clear all interrupts*/ - - - mtdcr (UIC2SR, 0xffffffff); /* Clear all interrupts */ - mtdcr (UIC2ER, 0x00000000); /* disable all interrupts*/ - mtdcr (UIC2CR, 0x00000000); /* Set Critical / Non Critical interrupts*/ - mtdcr (UIC2PR, 0xebebebff); /* Set Interrupt Polarities*/ - mtdcr (UIC2TR, 0x74747400); /* Set Interrupt Trigger Levels */ - mtdcr (UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ - mtdcr (UIC2SR, 0x00000000); /* clear all interrupts */ - mtdcr (UIC2SR, 0xffffffff); /* clear all interrupts */ - - mtdcr (UIC1SR, 0xffffffff); /* Clear all interrupts*/ - mtdcr (UIC1ER, 0x00000000); /* disable all interrupts*/ - mtdcr (UIC1CR, 0x00000000); /* Set Critical / Non Critical interrupts*/ - mtdcr (UIC1PR, 0xffffffff); /* Set Interrupt Polarities */ - mtdcr (UIC1TR, 0x001f8040); /* Set Interrupt Trigger Levels*/ - mtdcr (UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ - mtdcr (UIC1SR, 0x00000000); /* clear all interrupts*/ - mtdcr (UIC1SR, 0xffffffff); /* clear all interrupts*/ - - mtdcr (UIC0SR, 0xffffffff); /* Clear all interrupts */ - mtdcr (UIC0ER, 0x00000000); /* disable all interrupts excepted cascade to be checked */ - mtdcr (UIC0CR, 0x00104001); /* Set Critical / Non Critical interrupts*/ - mtdcr (UIC0PR, 0xffffffff); /* Set Interrupt Polarities*/ - mtdcr (UIC0TR, 0x010f0004); /* Set Interrupt Trigger Levels */ - mtdcr (UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ - mtdcr (UIC0SR, 0x00000000); /* clear all interrupts*/ - mtdcr (UIC0SR, 0xffffffff); /* clear all interrupts*/ - - mfsdr(SDR0_MFR, mfr); - mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */ - mtsdr(SDR0_MFR, mfr); - - mtsdr(SDR0_PFC0, CONFIG_SYS_PFC0); - - out32(GPIO0_OR, CONFIG_SYS_GPIO_OR); - out32(GPIO0_ODR, CONFIG_SYS_GPIO_ODR); - out32(GPIO0_TCR, CONFIG_SYS_GPIO_TCR); - - return 0; -} - -int checkboard (void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - printf("Board: Katmai - AMCC 440SPe Evaluation Board"); - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - return 0; -} - -/* - * Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with - * board specific values. - */ -u32 ddr_wrdtr(u32 default_val) { - return (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_180_DEG_ADV | 0x823); -} - -u32 ddr_clktr(u32 default_val) { - return (SDRAM_CLKTR_CLKP_90_DEG_ADV); -} - -#if defined(CONFIG_PCI) -int board_pcie_card_present(int port) -{ - u32 val; - - val = in32(GPIO0_IR); - switch (port) { - case 0: - return !(val & GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT0)); - case 1: - return !(val & GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT1)); - case 2: - return !(val & GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT2)); - default: - return 0; - } -} -#endif /* defined(CONFIG_PCI) */ - -int board_eth_init(bd_t *bis) -{ - cpu_eth_init(bis); - return pci_eth_init(bis); -} diff --git a/board/amcc/kilauea/Kconfig b/board/amcc/kilauea/Kconfig deleted file mode 100644 index 3f2f434..0000000 --- a/board/amcc/kilauea/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_KILAUEA - -config SYS_BOARD - default "kilauea" - -config SYS_VENDOR - default "amcc" - -config SYS_CONFIG_NAME - default "kilauea" - -endif diff --git a/board/amcc/kilauea/MAINTAINERS b/board/amcc/kilauea/MAINTAINERS deleted file mode 100644 index 12bbcb1..0000000 --- a/board/amcc/kilauea/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -KILAUEA BOARD -M: Stefan Roese <sr(a)denx.de> -S: Maintained -F: board/amcc/kilauea/ -F: include/configs/kilauea.h -F: configs/haleakala_defconfig -F: configs/kilauea_defconfig diff --git a/board/amcc/kilauea/Makefile b/board/amcc/kilauea/Makefile deleted file mode 100644 index 754dadc..0000000 --- a/board/amcc/kilauea/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2007 -# Stefan Roese, DENX Software Engineering, sr(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := kilauea.o -obj-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o diff --git a/board/amcc/kilauea/chip_config.c b/board/amcc/kilauea/chip_config.c deleted file mode 100644 index 7e9dd3b..0000000 --- a/board/amcc/kilauea/chip_config.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * (C) Copyright 2009 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/ppc4xx_config.h> - -/* NAND booting versions differ in bytes: 6, 8, 9, 11, 12 */ - -struct ppc4xx_config ppc4xx_config_val[] = { - { - "333-nor","NOR CPU: 333 PLB: 166 OPB: 83 EBC: 83", - { - 0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00, - 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 - } - }, - { - "400-133-nor", "NOR CPU: 400 PLB: 133 OPB: 66 EBC: 66", - { - 0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00, - 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 - } - }, - { - "400-nor", "NOR CPU: 400 PLB: 200 OPB: 100 EBC: 100", - { - 0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00, - 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 - } - }, - { - "533-nor", "NOR CPU: 533 PLB: 177 OPB: 88 EBC: 88", - { - 0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00, - 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 - } - }, - { - "533-nand", "NOR CPU: 533 PLB: 177 OPB: 88 EBC: 88", - { - 0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0f, 0x00, - 0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 - } - }, - { - "600-nor", "NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100", - { - 0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00, - 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 - } - }, - { - "600-nand", "NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100", - { - 0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0f, 0x00, - 0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 - } - }, - { - "666-nor", "NOR CPU: 666 PLB: 222 OPB: 111 EBC: 111", - { - 0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00, - 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 - } - }, -}; - -int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val); diff --git a/board/amcc/kilauea/config.mk b/board/amcc/kilauea/config.mk deleted file mode 100644 index 0dc15c1..0000000 --- a/board/amcc/kilauea/config.mk +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2007-2010 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c deleted file mode 100644 index abfaa1e..0000000 --- a/board/amcc/kilauea/kilauea.c +++ /dev/null @@ -1,309 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/ppc405.h> -#include <libfdt.h> -#include <fdt_support.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/errno.h> - -#if defined(CONFIG_PCI) -#include <pci.h> -#include <asm/4xx_pcie.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -static int board_cpld_version(void) -{ - u32 cpld; - - cpld = in_be32((void *)CONFIG_SYS_FPGA_FIFO_BASE); - if ((cpld & CONFIG_SYS_FPGA_MAGIC_MASK) != CONFIG_SYS_FPGA_MAGIC) { - /* - * Magic not found -> "old" CPLD revision which needs - * the "old" EBC configuration - */ - mtebc(PB2AP, EBC_BXAP_BME_ENABLED | EBC_BXAP_FWT_ENCODE(5) | - EBC_BXAP_BWT_ENCODE(0) | EBC_BXAP_BCE_DISABLE | - EBC_BXAP_BCT_2TRANS | EBC_BXAP_CSN_ENCODE(0) | - EBC_BXAP_OEN_ENCODE(0) | EBC_BXAP_WBN_ENCODE(3) | - EBC_BXAP_WBF_ENCODE(0) | EBC_BXAP_TH_ENCODE(4) | - EBC_BXAP_RE_DISABLED | EBC_BXAP_SOR_DELAYED | - EBC_BXAP_BEM_WRITEONLY | EBC_BXAP_PEN_DISABLED); - - /* - * Return 0 for "old" CPLD version - */ - return 0; - } - - /* - * Magic found -> "new" CPLD revision which needs no new - * EBC configuration - */ - return (cpld & CONFIG_SYS_FPGA_VER_MASK) >> 8; -} - -/* - * Board early initialization function - */ -int board_early_init_f (void) -{ - u32 val; - - /*--------------------------------------------------------------------+ - | Interrupt controller setup for the AMCC 405EX(r) PINE evaluation board. - +--------------------------------------------------------------------+ - +---------------------------------------------------------------------+ - |Interrupt| Source | Pol. | Sensi.| Crit. | - +---------+-----------------------------------+-------+-------+-------+ - | IRQ 00 | UART0 | High | Level | Non | - | IRQ 01 | UART1 | High | Level | Non | - | IRQ 02 | IIC0 | High | Level | Non | - | IRQ 03 | TBD | High | Level | Non | - | IRQ 04 | TBD | High | Level | Non | - | IRQ 05 | EBM | High | Level | Non | - | IRQ 06 | BGI | High | Level | Non | - | IRQ 07 | IIC1 | Rising| Edge | Non | - | IRQ 08 | SPI | High | Lvl/ed| Non | - | IRQ 09 | External IRQ 0 - (PCI-Express) | pgm H | Pgm | Non | - | IRQ 10 | MAL TX EOB | High | Level | Non | - | IRQ 11 | MAL RX EOB | High | Level | Non | - | IRQ 12 | DMA Channel 0 FIFO Full | High | Level | Non | - | IRQ 13 | DMA Channel 0 Stat FIFO | High | Level | Non | - | IRQ 14 | DMA Channel 1 FIFO Full | High | Level | Non | - | IRQ 15 | DMA Channel 1 Stat FIFO | High | Level | Non | - | IRQ 16 | PCIE0 AL | high | Level | Non | - | IRQ 17 | PCIE0 VPD access | rising| Edge | Non | - | IRQ 18 | PCIE0 hot reset request | rising| Edge | Non | - | IRQ 19 | PCIE0 hot reset request | faling| Edge | Non | - | IRQ 20 | PCIE0 TCR | High | Level | Non | - | IRQ 21 | PCIE0 MSI level0 | High | Level | Non | - | IRQ 22 | PCIE0 MSI level1 | High | Level | Non | - | IRQ 23 | Security EIP-94 | High | Level | Non | - | IRQ 24 | EMAC0 interrupt | High | Level | Non | - | IRQ 25 | EMAC1 interrupt | High | Level | Non | - | IRQ 26 | PCIE0 MSI level2 | High | Level | Non | - | IRQ 27 | External IRQ 4 | pgm H | Pgm | Non | - | IRQ 28 | UIC2 Non-critical Int. | High | Level | Non | - | IRQ 29 | UIC2 Critical Interrupt | High | Level | Crit. | - | IRQ 30 | UIC1 Non-critical Int. | High | Level | Non | - | IRQ 31 | UIC1 Critical Interrupt | High | Level | Crit. | - |---------------------------------------------------------------------- - | IRQ 32 | MAL Serr | High | Level | Non | - | IRQ 33 | MAL Txde | High | Level | Non | - | IRQ 34 | MAL Rxde | High | Level | Non | - | IRQ 35 | PCIE0 bus master VC0 |falling| Edge | Non | - | IRQ 36 | PCIE0 DCR Error | High | Level | Non | - | IRQ 37 | EBC | High |Lvl Edg| Non | - | IRQ 38 | NDFC | High | Level | Non | - | IRQ 39 | GPT Compare Timer 8 | Risin | Edge | Non | - | IRQ 40 | GPT Compare Timer 9 | Risin | Edge | Non | - | IRQ 41 | PCIE1 AL | high | Level | Non | - | IRQ 42 | PCIE1 VPD access | rising| edge | Non | - | IRQ 43 | PCIE1 hot reset request | rising| Edge | Non | - | IRQ 44 | PCIE1 hot reset request | faling| Edge | Non | - | IRQ 45 | PCIE1 TCR | High | Level | Non | - | IRQ 46 | PCIE1 bus master VC0 |falling| Edge | Non | - | IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non | - | IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non | - | IRQ 49 | Ext. IRQ 7 |pgm/Fal|pgm/Lvl| Non | - | IRQ 50 | Ext. IRQ 8 - |pgm (H)|pgm/Lvl| Non | - | IRQ 51 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non | - | IRQ 52 | GPT Compare Timer 5 | high | Edge | Non | - | IRQ 53 | GPT Compare Timer 6 | high | Edge | Non | - | IRQ 54 | GPT Compare Timer 7 | high | Edge | Non | - | IRQ 55 | Serial ROM | High | Level | Non | - | IRQ 56 | GPT Decrement Pulse | High | Level | Non | - | IRQ 57 | Ext. IRQ 2 |pgm/Fal|pgm/Lvl| Non | - | IRQ 58 | Ext. IRQ 5 |pgm/Fal|pgm/Lvl| Non | - | IRQ 59 | Ext. IRQ 6 |pgm/Fal|pgm/Lvl| Non | - | IRQ 60 | EMAC0 Wake-up | High | Level | Non | - | IRQ 61 | Ext. IRQ 1 |pgm/Fal|pgm/Lvl| Non | - | IRQ 62 | EMAC1 Wake-up | High | Level | Non | - |---------------------------------------------------------------------- - | IRQ 64 | PE0 AL | High | Level | Non | - | IRQ 65 | PE0 VPD Access | Risin | Edge | Non | - | IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non | - | IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non | - | IRQ 68 | PE0 TCR | High | Level | Non | - | IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non | - | IRQ 70 | PE0 DCR Error | High | Level | Non | - | IRQ 71 | Reserved | N/A | N/A | Non | - | IRQ 72 | PE1 AL | High | Level | Non | - | IRQ 73 | PE1 VPD Access | Risin | Edge | Non | - | IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non | - | IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non | - | IRQ 76 | PE1 TCR | High | Level | Non | - | IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non | - | IRQ 78 | PE1 DCR Error | High | Level | Non | - | IRQ 79 | Reserved | N/A | N/A | Non | - | IRQ 80 | PE2 AL | High | Level | Non | - | IRQ 81 | PE2 VPD Access | Risin | Edge | Non | - | IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non | - | IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non | - | IRQ 84 | PE2 TCR | High | Level | Non | - | IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non | - | IRQ 86 | PE2 DCR Error | High | Level | Non | - | IRQ 87 | Reserved | N/A | N/A | Non | - | IRQ 88 | External IRQ(5) | Progr | Progr | Non | - | IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non | - | IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non | - | IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non | - | IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non | - | IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non | - | IRQ 94 | Reserved | N/A | N/A | Non | - | IRQ 95 | Reserved | N/A | N/A | Non | - |--------------------------------------------------------------------- - +---------+-----------------------------------+-------+-------+------*/ - /*--------------------------------------------------------------------+ - | Initialise UIC registers. Clear all interrupts. Disable all - | interrupts. - | Set critical interrupt values. Set interrupt polarities. Set - | interrupt trigger levels. Make bit 0 High priority. Clear all - | interrupts again. - +-------------------------------------------------------------------*/ - - mtdcr (UIC2SR, 0xffffffff); /* Clear all interrupts */ - mtdcr (UIC2ER, 0x00000000); /* disable all interrupts */ - mtdcr (UIC2CR, 0x00000000); /* Set Critical / Non Critical interrupts */ - mtdcr (UIC2PR, 0xf7ffffff); /* Set Interrupt Polarities */ - mtdcr (UIC2TR, 0x01e1fff8); /* Set Interrupt Trigger Levels */ - mtdcr (UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ - mtdcr (UIC2SR, 0x00000000); /* clear all interrupts */ - mtdcr (UIC2SR, 0xffffffff); /* clear all interrupts */ - - mtdcr (UIC1SR, 0xffffffff); /* Clear all interrupts */ - mtdcr (UIC1ER, 0x00000000); /* disable all interrupts */ - mtdcr (UIC1CR, 0x00000000); /* Set Critical / Non Critical interrupts */ - mtdcr (UIC1PR, 0xfffac785); /* Set Interrupt Polarities */ - mtdcr (UIC1TR, 0x001d0040); /* Set Interrupt Trigger Levels */ - mtdcr (UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ - mtdcr (UIC1SR, 0x00000000); /* clear all interrupts */ - mtdcr (UIC1SR, 0xffffffff); /* clear all interrupts */ - - mtdcr (UIC0SR, 0xffffffff); /* Clear all interrupts */ - mtdcr (UIC0ER, 0x0000000a); /* Disable all interrupts */ - /* Except cascade UIC0 and UIC1 */ - mtdcr (UIC0CR, 0x00000000); /* Set Critical / Non Critical interrupts */ - mtdcr (UIC0PR, 0xffbfefef); /* Set Interrupt Polarities */ - mtdcr (UIC0TR, 0x00007000); /* Set Interrupt Trigger Levels */ - mtdcr (UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ - mtdcr (UIC0SR, 0x00000000); /* clear all interrupts */ - mtdcr (UIC0SR, 0xffffffff); /* clear all interrupts */ - - /* - * Note: Some cores are still in reset when the chip starts, so - * take them out of reset - */ - mtsdr(SDR0_SRST, 0); - - /* Configure 405EX for NAND usage */ - val = SDR0_CUST0_MUX_NDFC_SEL | - SDR0_CUST0_NDFC_ENABLE | - SDR0_CUST0_NDFC_BW_8_BIT | - SDR0_CUST0_NRB_BUSY | - (0x80000000 >> (28 + CONFIG_SYS_NAND_CS)); - mtsdr(SDR0_CUST0, val); - - /* - * Configure PFC (Pin Function Control) registers - * -> Enable USB - */ - val = SDR0_PFC1_USBEN | SDR0_PFC1_USBBIGEN | SDR0_PFC1_GPT_FREQ; - mtsdr(SDR0_PFC1, val); - - /* - * The CPLD version detection has to be the first access to - * the CPLD, so we need to make this access this early and - * save the CPLD version for later. - */ - gd->board_type = board_cpld_version(); - - /* - * Configure FPGA register with PCIe reset - */ - out_be32((void *)CONFIG_SYS_FPGA_BASE, 0xff570cc4); /* assert PCIe reset */ - mdelay(50); - out_be32((void *)CONFIG_SYS_FPGA_BASE, 0xff570cc7); /* deassert PCIe reset */ - - return 0; -} - -int misc_init_r(void) -{ -#ifdef CONFIG_ENV_IS_IN_FLASH - /* Monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - -CONFIG_SYS_MONITOR_LEN, - 0xffffffff, - &flash_info[0]); -#endif - - return 0; -} - -static int is_405exr(void) -{ - u32 pvr = get_pvr(); - - if (pvr & 0x00000004) - return 0; /* bit 2 set -> 405EX */ - - return 1; /* bit 2 cleared -> 405EXr */ -} - -int board_emac_count(void) -{ - /* - * 405EXr only has one EMAC interface, 405EX has two - */ - if (is_405exr()) - return 1; - else - return 2; -} - -/* - * Override the weak default implementation and return the - * last PCIe slot number (max number - 1). - */ -int board_pcie_last(void) -{ - /* - * 405EXr only has one EMAC interface, 405EX has two - */ - if (is_405exr()) - return 1 - 1; - else - return 2 - 1; -} - -int checkboard (void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - if (is_405exr()) - printf("Board: Haleakala - AMCC PPC405EXr Evaluation Board"); - else - printf("Board: Kilauea - AMCC PPC405EX Evaluation Board"); - - if (i > 0) { - puts(", serial# "); - puts(buf); - } - printf(" (CPLD rev. %ld)\n", gd->board_type); - - return (0); -} diff --git a/board/amcc/luan/Kconfig b/board/amcc/luan/Kconfig deleted file mode 100644 index 3df90af..0000000 --- a/board/amcc/luan/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_LUAN - -config SYS_BOARD - default "luan" - -config SYS_VENDOR - default "amcc" - -config SYS_CONFIG_NAME - default "luan" - -endif diff --git a/board/amcc/luan/MAINTAINERS b/board/amcc/luan/MAINTAINERS deleted file mode 100644 index a23296d..0000000 --- a/board/amcc/luan/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -LUAN BOARD -M: John Otken <jotken(a)softadvances.com> -S: Maintained -F: board/amcc/luan/ -F: include/configs/luan.h -F: configs/luan_defconfig diff --git a/board/amcc/luan/Makefile b/board/amcc/luan/Makefile deleted file mode 100644 index 345ad56..0000000 --- a/board/amcc/luan/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2002-2006 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = luan.o flash.o -extra-y += init.o diff --git a/board/amcc/luan/config.mk b/board/amcc/luan/config.mk deleted file mode 100644 index f18b097..0000000 --- a/board/amcc/luan/config.mk +++ /dev/null @@ -1,16 +0,0 @@ -# -# (C) Copyright 2002 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif diff --git a/board/amcc/luan/epld.h b/board/amcc/luan/epld.h deleted file mode 100644 index 569d78c..0000000 --- a/board/amcc/luan/epld.h +++ /dev/null @@ -1,85 +0,0 @@ -#define EPLD0_FSEL_FB2 0x80 -#define EPLD0_BOOT_SMALL_FLASH 0x40 /* 0 boot from large flash, 1 from small flash */ -#define EPLD0_RAW_CARD_BIT0 0x20 /* raw card EC level */ -#define EPLD0_RAW_CARD_BIT1 0x10 -#define EPLD0_RAW_CARD_BIT2 0x08 -#define EPLD0_EXT_ARB_SEL_N 0x04 /* 0 select on-board ext PCI-X, 1 internal arbiter */ -#define EPLD0_FLASH_ONBRD_N 0x02 /* 0 small flash/SRAM active, 1 block access */ -#define EPLD0_FLASH_SRAM_SEL_N 0x01 /* 0 SRAM at mem top, 1 small flash at mem top */ - -#define EPLD1_CLK_CNTL0 0x80 /* FSEL-FB1 of MPC9772 */ -#define EPLD1_PCIL0_CNTL1 0x40 /* S*0 of 9531 */ -#define EPLD1_PCIL0_CNTL2 0x20 /* S*1 of 9531 */ -#define EPLD1_CLK_CNTL3 0x10 /* FSEL-B1 of MPC9772 */ -#define EPLD1_CLK_CNTL4 0x08 /* FSEL-B0 of MPC9772 */ -#define EPLD1_MASTER_CLOCK6 0x04 /* clock source select 6 */ -#define EPLD1_MASTER_CLOCK7 0x02 /* clock source select 7 */ -#define EPLD1_MASTER_CLOCK8 0x01 /* clock source select 8 */ - -#define EPLD2_ETH_MODE_10 0x80 /* Ethernet mode 10 (default = 1) */ -#define EPLD2_ETH_MODE_100 0x40 /* Ethernet mode 100 (default = 1) */ -#define EPLD2_ETH_MODE_1000 0x20 /* Ethernet mode 1000 (default = 1) */ -#define EPLD2_ETH_DUPLEX_MODE 0x10 /* Ethernet force full duplex mode */ -#define EPLD2_RESET_ETH_N 0x08 /* Ethernet reset (default = 1) */ -#define EPLD2_ETH_AUTO_NEGO 0x04 /* Ethernet auto negotiation */ -#define EPLD2_DEFAULT_UART_N 0x01 /* 0 select DSR DTR for UART1 */ - -#define EPLD3_STATUS_LED4 0x08 /* status LED 8 (1 = LED on) */ -#define EPLD3_STATUS_LED3 0x04 /* status LED 4 (1 = LED on) */ -#define EPLD3_STATUS_LED2 0x02 /* status LED 2 (1 = LED on) */ -#define EPLD3_STATUS_LED1 0x01 /* status LED 1 (1 = LED on) */ - -#define EPLD4_PCIL0_VTH1 0x80 /* PCI-X 0 VTH1 status */ -#define EPLD4_PCIL0_VTH2 0x40 /* PCI-X 0 VTH2 status */ -#define EPLD4_PCIL0_VTH3 0x20 /* PCI-X 0 VTH3 status */ -#define EPLD4_PCIL0_VTH4 0x10 /* PCI-X 0 VTH4 status */ -#define EPLD4_PCIX1_VTH1 0x08 /* PCI-X 1 VTH1 status */ -#define EPLD4_PCIX1_VTH2 0x04 /* PCI-X 1 VTH2 status */ -#define EPLD4_PCIX1_VTH3 0x02 /* PCI-X 1 VTH3 status */ -#define EPLD4_PCIX1_VTH4 0x01 /* PCI-X 1 VTH4 status */ - -#define EPLD5_PCIL0_INT0 0x80 /* PCIX0 INT0 status, write 0 to reset */ -#define EPLD5_PCIL0_INT1 0x40 /* PCIX0 INT1 status, write 0 to reset */ -#define EPLD5_PCIL0_INT2 0x20 /* PCIX0 INT2 status, write 0 to reset */ -#define EPLD5_PCIL0_INT3 0x10 /* PCIX0 INT3 status, write 0 to reset */ -#define EPLD5_PCIX1_INT0 0x08 /* PCIX1 INT0 status, write 0 to reset */ -#define EPLD5_PCIX1_INT1 0x04 /* PCIX1 INT1 status, write 0 to reset */ -#define EPLD5_PCIX1_INT2 0x02 /* PCIX1 INT2 status, write 0 to reset */ -#define EPLD5_PCIX1_INT3 0x01 /* PCIX1 INT3 status, write 0 to reset */ - -#define EPLD6_PCIL0_RESET_CTL 0x80 /* 0=enable slot reset, 1=disable slot reset */ -#define EPLD6_PCIX1_RESET_CTL 0x40 /* 0=enable slot reset, 1=disable slot reset */ -#define EPLD6_ETH_INT_MODE 0x20 /* 0=IRQ5 recv's external eth int */ -#define EPLD6_PCIX2_RESET_CTL 0x10 /* 0=enable slot reset, 1=disable slot reset */ -#define EPLD6_PCI1_CLKCNTL1 0x80 /* PCI1 clock control S*0 of 9531 */ -#define EPLD6_PCI1_CLKCNTL2 0x40 /* PCI1 clock control S*1 of 9531 */ -#define EPLD6_PCI2_CLKCNTL1 0x20 /* PCI2 clock control S*0 of 9531 */ -#define EPLD6_PCI2_CLKCNTL2 0x10 /* PCI2 clock control S*1 of 9531 */ - -#define EPLD7_VTH1 0x80 /* PCI2 VTH1 status */ -#define EPLD7_VTH2 0x40 /* PCI2 VTH2 status */ -#define EPLD7_VTH3 0x20 /* PCI2 VTH3 status */ -#define EPLD7_VTH4 0x10 /* PCI2 VTH4 status */ -#define EPLD7_INTA_MODE 0x80 /* see S5 on SW2 for details */ -#define EPLD7_PCI_INT_MODE_N 0x40 /* see S1 on SW2 for details */ -#define EPLD7_WRITE_ENABLE_GPIO 0x20 /* see S2 on SW2 for details */ -#define EPLD7_WRITE_ENABLE_INT 0x10 /* see S3 on SW2 for details */ - - -typedef struct { - unsigned char status; /* misc status */ - unsigned char clock; /* clock status, PCI-X clock control */ - unsigned char ethuart; /* Ethernet, UART status */ - unsigned char leds; /* LED register */ - unsigned char vth01; /* PCI0, PCI1 VTH register */ - unsigned char pciints; /* PCI0, PCI1 interrupts */ - unsigned char pci2; /* PCI2 interrupts, clock control */ - unsigned char vth2; /* PCI2 VTH register */ - unsigned char filler1[4096-8]; - unsigned char gpio00; /* GPIO bits 0-7 */ - unsigned char gpio08; /* GPIO bits 8-15 */ - unsigned char gpio16; /* GPIO bits 16-23 */ - unsigned char gpio24; /* GPIO bits 24-31 */ - unsigned char filler2[4096-4]; - unsigned char version; /* EPLD version */ -} epld_t; diff --git a/board/amcc/luan/flash.c b/board/amcc/luan/flash.c deleted file mode 100644 index a242bef..0000000 --- a/board/amcc/luan/flash.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * (C) Copyright 2002 Jun Gu <jung(a)artesyncp.com> - * Add support for Am29F016D and dynamic switch setting. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Modified 4/5/2001 - * Wait for completion of each sector erase command issued - * 4/5/2001 - * Chris Hallinan - DS4.COM, Inc. - clh(a)net1plus.com - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/processor.h> - -#undef DEBUG -#ifdef DEBUG -#define DEBUGF(x...) printf(x) -#else -#define DEBUGF(x...) -#endif /* DEBUG */ - -static unsigned long flash_addr_table[1][CONFIG_SYS_MAX_FLASH_BANKS] = { - {0xff900000, 0xff980000, 0xffc00000}, /* 0:000: configuraton 3 */ -}; - -/* - * include common flash code (for amcc boards) - */ -#include "../common/flash.c" - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(vu_long * addr, flash_info_t * info); - -unsigned long flash_init(void) -{ - unsigned long total_b = 0; - unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS]; - unsigned short index = 0; - int i; - - /* read FPGA base register FPGA_REG0 */ - - DEBUGF("\n"); - DEBUGF("FLASH: Index: %d\n", index); - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].sector_count = -1; - flash_info[i].size = 0; - - /* check whether the address is 0 */ - if (flash_addr_table[index][i] == 0) { - continue; - } - - /* call flash_get_size() to initialize sector address */ - size_b[i] = flash_get_size((vu_long *) - flash_addr_table[index][i], - &flash_info[i]); - flash_info[i].size = size_b[i]; - if (flash_info[i].flash_id == FLASH_UNKNOWN) { - printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", - i, size_b[i], size_b[i] << 20); - flash_info[i].sector_count = -1; - flash_info[i].size = 0; - } - - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1, - &flash_info[2]); -#ifdef CONFIG_ENV_IS_IN_FLASH - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[2]); - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[2]); -#endif - - total_b += flash_info[i].size; - } - - return total_b; -} diff --git a/board/amcc/luan/init.S b/board/amcc/luan/init.S deleted file mode 100644 index 0f4a78e..0000000 --- a/board/amcc/luan/init.S +++ /dev/null @@ -1,59 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * Copyright (C) 2002 Scott McNutt <smcnutt(a)artesyncp.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <ppc_asm.tmpl> -#include <config.h> -#include <asm/mmu.h> -#include <asm/ppc4xx.h> - -/************************************************************************** - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - *************************************************************************/ - - .section .bootpg,"ax" - .globl tlbtab - -tlbtab: - tlbtab_start - - /* - * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the - * speed up boot process. It is patched after relocation to enable SA_I - */ - tlbentry(0xfff00000, SZ_1M, 0xfff00000, 1, AC_RWX | SA_G) - - tlbentry(0xffc00000, SZ_1M, 0xffc00000, 1, AC_RWX | SA_IG) - tlbentry(0xffd00000, SZ_1M, 0xffd00000, 1, AC_RWX | SA_IG) - tlbentry(0xffe00000, SZ_1M, 0xffe00000, 1, AC_RWX | SA_IG) - tlbentry(0xff900000, SZ_1M, 0xff900000, 1, AC_RWX | SA_IG) - tlbentry(CONFIG_SYS_EPLD_BASE, SZ_256K, 0xff000000, 1, AC_RW | SA_IG) - - /* - * TLB entries for SDRAM are not needed on this platform. - * They are dynamically generated in the SPD DDR(2) detection - * routine. - */ - - /* internal ram (l2 cache) */ - tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_RWX | SA_I) - - /* peripherals at f0000000 */ - tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, CONFIG_SYS_PERIPHERAL_BASE, 1, AC_RW | SA_IG) - - /* PCI */ - tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 9, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 9, AC_RW | SA_IG) - tlbtab_end diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c deleted file mode 100644 index 774671d..0000000 --- a/board/amcc/luan/luan.c +++ /dev/null @@ -1,223 +0,0 @@ -/* - * (C) Copyright 2005 - * John Otken, jotken(a)softadvances.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <asm/ppc4xx.h> -#include <asm/processor.h> -#include <asm/ppc4xx-isram.h> -#include <spd_sdram.h> -#include "epld.h" - -DECLARE_GLOBAL_DATA_PTR; - -extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - - -/************************************************************************* - * int board_early_init_f() - * - ************************************************************************/ -int board_early_init_f(void) -{ - u32 mfr; - - mtebc( PB0AP, 0x03800000 ); /* set chip selects */ - mtebc( PB0CR, 0xffc58000 ); /* ebc0_b0cr, 4MB at 0xffc00000 CS0 */ - mtebc( PB1AP, 0x03800000 ); - mtebc( PB1CR, 0xff018000 ); /* ebc0_b1cr, 1MB at 0xff000000 CS1 */ - mtebc( PB2AP, 0x03800000 ); - mtebc( PB2CR, 0xff838000 ); /* ebc0_b2cr, 2MB at 0xff800000 CS2 */ - - mtdcr( UIC1SR, 0xffffffff ); /* Clear all interrupts */ - mtdcr( UIC1ER, 0x00000000 ); /* disable all interrupts */ - mtdcr( UIC1CR, 0x00000000 ); /* Set Critical / Non Critical interrupts */ - mtdcr( UIC1PR, 0x7fff83ff ); /* Set Interrupt Polarities */ - mtdcr( UIC1TR, 0x001f8000 ); /* Set Interrupt Trigger Levels */ - mtdcr( UIC1VR, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */ - mtdcr( UIC1SR, 0x00000000 ); /* clear all interrupts */ - mtdcr( UIC1SR, 0xffffffff ); - - mtdcr( UIC0SR, 0xffffffff ); /* Clear all interrupts */ - mtdcr( UIC0ER, 0x00000000 ); /* disable all interrupts excepted cascade */ - mtdcr( UIC0CR, 0x00000001 ); /* Set Critical / Non Critical interrupts */ - mtdcr( UIC0PR, 0xffffffff ); /* Set Interrupt Polarities */ - mtdcr( UIC0TR, 0x01000004 ); /* Set Interrupt Trigger Levels */ - mtdcr( UIC0VR, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */ - mtdcr( UIC0SR, 0x00000000 ); /* clear all interrupts */ - mtdcr( UIC0SR, 0xffffffff ); - - mfsdr(SDR0_MFR, mfr); - mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */ - mtsdr(SDR0_MFR, mfr); - - return 0; -} - - -/************************************************************************* - * int misc_init_r() - * - ************************************************************************/ -int misc_init_r(void) -{ - volatile epld_t *x = (epld_t *) CONFIG_SYS_EPLD_BASE; - - /* set modes of operation */ - x->ethuart |= EPLD2_ETH_MODE_10 | EPLD2_ETH_MODE_100 | - EPLD2_ETH_MODE_1000 | EPLD2_ETH_DUPLEX_MODE; - /* clear ETHERNET_AUTO_NEGO bit to turn on autonegotiation */ - x->ethuart &= ~EPLD2_ETH_AUTO_NEGO; - - /* put Ethernet+PHY in reset */ - x->ethuart &= ~EPLD2_RESET_ETH_N; - udelay(10000); - /* take Ethernet+PHY out of reset */ - x->ethuart |= EPLD2_RESET_ETH_N; - - return 0; -} - - -/************************************************************************* - * int checkboard() - * - ************************************************************************/ -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - printf("Board: Luan - AMCC PPC440SP Evaluation Board"); - - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - return 0; -} - -/* - * Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with - * board specific values. - */ -u32 ddr_clktr(u32 default_val) { - return (SDRAM_CLKTR_CLKP_180_DEG_ADV); -} - -/************************************************************************* - * hw_watchdog_reset - * - * This routine is called to reset (keep alive) the watchdog timer - * - ************************************************************************/ -#if defined(CONFIG_HW_WATCHDOG) -void hw_watchdog_reset(void) -{ -} -#endif - - -/************************************************************************* - * int on_off() - * - ************************************************************************/ -static int on_off( const char *s ) -{ - if (strcmp(s, "on") == 0) { - return 1; - } else if (strcmp(s, "off") == 0) { - return 0; - } - return -1; -} - - -/************************************************************************* - * void l2cache_disable() - * - ************************************************************************/ -static void l2cache_disable(void) -{ - mtdcr( L2_CACHE_CFG, 0 ); -} - - -/************************************************************************* - * void l2cache_enable() - * - ************************************************************************/ -static void l2cache_enable(void) /* see p258 7.4.1 Enabling L2 Cache */ -{ - mtdcr( L2_CACHE_CFG, 0x80000000 ); /* enable L2_MODE L2_CFG[L2M] */ - - mtdcr( L2_CACHE_ADDR, 0 ); /* set L2_ADDR with all zeros */ - - mtdcr( L2_CACHE_CMD, 0x80000000 ); /* issue HCLEAR command via L2_CMD */ - - while (!(mfdcr( L2_CACHE_STAT ) & 0x80000000 )) ;; /* poll L2_SR for completion */ - - mtdcr( L2_CACHE_CMD, 0x10000000 ); /* clear cache errors L2_CMD[CCP] */ - - mtdcr( L2_CACHE_CMD, 0x08000000 ); /* clear tag errors L2_CMD[CTE] */ - - mtdcr( L2_CACHE_SNP0, 0 ); /* snoop registers */ - mtdcr( L2_CACHE_SNP1, 0 ); - - __asm__ volatile ("sync"); /* msync */ - - mtdcr( L2_CACHE_CFG, 0xe0000000 ); /* inst and data use L2 */ - - __asm__ volatile ("sync"); -} - - -/************************************************************************* - * int l2cache_status() - * - ************************************************************************/ -static int l2cache_status(void) -{ - return (mfdcr( L2_CACHE_CFG ) & 0x60000000) != 0; -} - - -/************************************************************************* - * int do_l2cache() - * - ************************************************************************/ -int do_l2cache( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] ) -{ - switch (argc) { - case 2: /* on / off */ - switch (on_off(argv[1])) { - case 0: l2cache_disable(); - break; - case 1: l2cache_enable(); - break; - } - /* FALL TROUGH */ - case 1: /* get status */ - printf ("L2 Cache is %s\n", - l2cache_status() ? "ON" : "OFF"); - return 0; - default: - return cmd_usage(cmdtp); - } - - return 0; -} - - -U_BOOT_CMD( - l2cache, 2, 1, do_l2cache, - "enable or disable L2 cache", - "[on, off]\n" - " - enable or disable L2 cache" -); diff --git a/board/amcc/makalu/Kconfig b/board/amcc/makalu/Kconfig deleted file mode 100644 index 31ce5f1..0000000 --- a/board/amcc/makalu/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_MAKALU - -config SYS_BOARD - default "makalu" - -config SYS_VENDOR - default "amcc" - -config SYS_CONFIG_NAME - default "makalu" - -endif diff --git a/board/amcc/makalu/MAINTAINERS b/board/amcc/makalu/MAINTAINERS deleted file mode 100644 index ecd5e19..0000000 --- a/board/amcc/makalu/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -MAKALU BOARD -M: Stefan Roese <sr(a)denx.de> -S: Maintained -F: board/amcc/makalu/ -F: include/configs/makalu.h -F: configs/makalu_defconfig diff --git a/board/amcc/makalu/Makefile b/board/amcc/makalu/Makefile deleted file mode 100644 index dcf162c..0000000 --- a/board/amcc/makalu/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2007 -# Stefan Roese, DENX Software Engineering, sr(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = makalu.o cmd_pll.o -obj-y += init.o diff --git a/board/amcc/makalu/cmd_pll.c b/board/amcc/makalu/cmd_pll.c deleted file mode 100644 index f12655b..0000000 --- a/board/amcc/makalu/cmd_pll.c +++ /dev/null @@ -1,279 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * ehnus: change pll frequency. - * Wed Sep 5 11:45:17 CST 2007 - * hsun(a)udtech.com.cn - */ - - -#include <common.h> -#include <config.h> -#include <command.h> -#include <i2c.h> - -#ifdef CONFIG_CMD_EEPROM - -#define EEPROM_CONF_OFFSET 0 -#define EEPROM_TEST_OFFSET 16 -#define EEPROM_SDSTP_PARAM 16 - -#define PLL_NAME_MAX 12 -#define BUF_STEP 8 - -/* eeprom_wirtes 8Byte per op. */ -#define EEPROM_ALTER_FREQ(freq) \ - do { \ - int __i; \ - for (__i = 0; __i < 2; __i++) \ - eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, \ - EEPROM_CONF_OFFSET + __i*BUF_STEP, \ - pll_select[freq], \ - BUF_STEP + __i*BUF_STEP); \ - } while (0) - -#define PDEBUG -#ifdef PDEBUG -#define PLL_DEBUG pll_debug(EEPROM_CONF_OFFSET) -#else -#define PLL_DEBUG -#endif - -typedef enum { - PLL_ebc20, - PLL_333, - PLL_4001, - PLL_4002, - PLL_533, - PLL_600, - PLL_666, /* For now, kilauea can't support */ - RCONF, - WTEST, - PLL_TOTAL -} pll_freq_t; - -static const char -pll_name[][PLL_NAME_MAX] = { - "PLL_ebc20", - "PLL_333", - "PLL_400@1", - "PLL_400@2", - "PLL_533", - "PLL_600", - "PLL_666", - "RCONF", - "WTEST", - "" -}; - -/* - * ehnus: - */ -static uchar -pll_select[][EEPROM_SDSTP_PARAM] = { - /* 0: CPU 333MHz EBC 20MHz, for test only */ - { - 0x8c, 0x12, 0xec, 0x12, 0x88, 0x00, 0x0a, 0x00, - 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 - }, - - /* 0: 333 */ - { - 0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00, - 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 - }, - - /* 1: 400_266 */ - { - 0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00, - 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 - }, - - /* 2: 400 */ - { - 0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00, - 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 - }, - - /* 3: 533 */ - { - 0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00, - 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 - }, - - /* 4: 600 */ - { - 0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00, - 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 - }, - - /* 5: 666 */ - { - 0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00, - 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 - }, - - {} -}; - -static uchar -testbuf[EEPROM_SDSTP_PARAM] = { - 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, - 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff -}; - -static void -pll_debug(int off) -{ - int i; - uchar buffer[EEPROM_SDSTP_PARAM]; - - memset(buffer, 0, sizeof(buffer)); - eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, off, - buffer, EEPROM_SDSTP_PARAM); - - printf("Debug: SDSTP[0-3] at offset \"0x%02x\" lists as follows: \n", off); - for (i = 0; i < EEPROM_SDSTP_PARAM; i++) - printf("%02x ", buffer[i]); - printf("\n"); -} - -static void -test_write(void) -{ - printf("Debug: test eeprom_write ... "); - - /* - * Write twice, 8 bytes per write - */ - eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET, - testbuf, 8); - eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8, - testbuf, 16); - printf("done\n"); - - pll_debug(EEPROM_TEST_OFFSET); -} - -int -do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - char c = '\0'; - pll_freq_t pll_freq; - - if (argc < 2) - return cmd_usage(cmdtp); - - for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++) { - if (!strcmp(pll_name[pll_freq], argv[1])) - break; - } - - switch (pll_freq) { - case PLL_ebc20: - case PLL_333: - case PLL_4001: - case PLL_4002: - case PLL_533: - case PLL_600: - EEPROM_ALTER_FREQ(pll_freq); - break; - - case PLL_666: /* not support */ - printf("Choose this option will result in a boot failure." - "\nContinue? (Y/N): "); - - c = getc(); putc('\n'); - - if ((c == 'y') || (c == 'Y')) { - EEPROM_ALTER_FREQ(pll_freq); - break; - } - goto ret; - - case RCONF: - pll_debug(EEPROM_CONF_OFFSET); - goto ret; - case WTEST: - printf("DEBUG: write test\n"); - test_write(); - goto ret; - - default: - printf("Invalid options\n\n"); - return cmd_usage(cmdtp); - } - - printf("PLL set to %s, " - "reset the board to take effect\n", pll_name[pll_freq]); - - PLL_DEBUG; -ret: - return 0; -} - -U_BOOT_CMD( - pllalter, CONFIG_SYS_MAXARGS, 1, do_pll_alter, - "change pll frequence", - "pllalter <selection> - change pll frequence \n\n\ - ** New freq take effect after reset. ** \n\ - ----------------------------------------------\n\ - PLL_ebc20: Board: AMCC 405EX(r) Evaluation Board\n\ - \t Same as PLL_333 \n\ - \t except \n\ - \t EBC: 20 MHz \n\ - ----------------------------------------------\n\ - PLL_333: Board: AMCC 405EX(r) Evaluation Board\n\ - \t VCO: 666 MHz \n\ - \t CPU: 333 MHz \n\ - \t PLB: 166 MHz \n\ - \t OPB: 83 MHz \n\ - \t DDR: 83 MHz \n\ - ------------------------------------------------\n\ - PLL_400@1: Board: AMCC 405EX(r) Evaluation Board\n\ - \t VCO: 800 MHz \n\ - \t CPU: 400 MHz \n\ - \t PLB: 133 MHz \n\ - \t OPB: 66 MHz \n\ - \t DDR: 133 MHz \n\ - ------------------------------------------------\n\ - PLL_400@2: Board: AMCC 405EX(r) Evaluation Board\n\ - \t VCO: 800 MHz \n\ - \t CPU: 400 MHz \n\ - \t PLB: 200 MHz \n\ - \t OPB: 100 MHz \n\ - \t DDR: 200 MHz \n\ - ----------------------------------------------\n\ - PLL_533: Board: AMCC 405EX(r) Evaluation Board\n\ - \t VCO: 1066 MHz \n\ - \t CPU: 533 MHz \n\ - \t PLB: 177 MHz \n\ - \t OPB: 88 MHz \n\ - \t DDR: 177 MHz \n\ - ----------------------------------------------\n\ - PLL_600: Board: AMCC 405EX(r) Evaluation Board\n\ - \t VCO: 1200 MHz \n\ - \t CPU: 600 MHz \n\ - \t PLB: 200 MHz \n\ - \t OPB: 100 MHz \n\ - \t DDR: 200 MHz \n\ - ----------------------------------------------\n\ - PLL_666: Board: AMCC 405EX(r) Evaluation Board\n\ - \t VCO: 1333 MHz \n\ - \t CPU: 666 MHz \n\ - \t PLB: 166 MHz \n\ - \t OPB: 83 MHz \n\ - \t DDR: 166 MHz \n\ - -----------------------------------------------\n\ - RCONF: Read current eeprom configuration. \n\ - -----------------------------------------------\n\ - WTEST: Test EEPROM write with predefined values\n\ - -----------------------------------------------" -); - -#endif /* CONFIG_CMD_EEPROM */ diff --git a/board/amcc/makalu/init.S b/board/amcc/makalu/init.S deleted file mode 100644 index e15c622..0000000 --- a/board/amcc/makalu/init.S +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (c) 2008 Nuovation System Designs, LLC - * Grant Erickson <gerickson(a)nuovations.com> - * - * (C) Copyright 2007-2008 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * Originally based on code provided from Senao and AMCC - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - .globl ext_bus_cntlr_init -ext_bus_cntlr_init: - blr diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c deleted file mode 100644 index a6ad2a1..0000000 --- a/board/amcc/makalu/makalu.c +++ /dev/null @@ -1,223 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/ppc405.h> -#include <libfdt.h> -#include <asm/processor.h> -#include <asm/ppc4xx-gpio.h> -#include <asm/io.h> -#include <fdt_support.h> -#include <asm/errno.h> - -#if defined(CONFIG_PCI) -#include <pci.h> -#include <asm/4xx_pcie.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* - * Board early initialization function - */ -int board_early_init_f (void) -{ - u32 val; - - /*--------------------------------------------------------------------+ - | Interrupt controller setup for the AMCC 405EX(r) PINE evaluation board. - +--------------------------------------------------------------------+ - +---------------------------------------------------------------------+ - |Interrupt| Source | Pol. | Sensi.| Crit. | - +---------+-----------------------------------+-------+-------+-------+ - | IRQ 00 | UART0 | High | Level | Non | - | IRQ 01 | UART1 | High | Level | Non | - | IRQ 02 | IIC0 | High | Level | Non | - | IRQ 03 | TBD | High | Level | Non | - | IRQ 04 | TBD | High | Level | Non | - | IRQ 05 | EBM | High | Level | Non | - | IRQ 06 | BGI | High | Level | Non | - | IRQ 07 | IIC1 | Rising| Edge | Non | - | IRQ 08 | SPI | High | Lvl/ed| Non | - | IRQ 09 | External IRQ 0 - (PCI-Express) | pgm H | Pgm | Non | - | IRQ 10 | MAL TX EOB | High | Level | Non | - | IRQ 11 | MAL RX EOB | High | Level | Non | - | IRQ 12 | DMA Channel 0 FIFO Full | High | Level | Non | - | IRQ 13 | DMA Channel 0 Stat FIFO | High | Level | Non | - | IRQ 14 | DMA Channel 1 FIFO Full | High | Level | Non | - | IRQ 15 | DMA Channel 1 Stat FIFO | High | Level | Non | - | IRQ 16 | PCIE0 AL | high | Level | Non | - | IRQ 17 | PCIE0 VPD access | rising| Edge | Non | - | IRQ 18 | PCIE0 hot reset request | rising| Edge | Non | - | IRQ 19 | PCIE0 hot reset request | faling| Edge | Non | - | IRQ 20 | PCIE0 TCR | High | Level | Non | - | IRQ 21 | PCIE0 MSI level0 | High | Level | Non | - | IRQ 22 | PCIE0 MSI level1 | High | Level | Non | - | IRQ 23 | Security EIP-94 | High | Level | Non | - | IRQ 24 | EMAC0 interrupt | High | Level | Non | - | IRQ 25 | EMAC1 interrupt | High | Level | Non | - | IRQ 26 | PCIE0 MSI level2 | High | Level | Non | - | IRQ 27 | External IRQ 4 | pgm H | Pgm | Non | - | IRQ 28 | UIC2 Non-critical Int. | High | Level | Non | - | IRQ 29 | UIC2 Critical Interrupt | High | Level | Crit. | - | IRQ 30 | UIC1 Non-critical Int. | High | Level | Non | - | IRQ 31 | UIC1 Critical Interrupt | High | Level | Crit. | - |---------------------------------------------------------------------- - | IRQ 32 | MAL Serr | High | Level | Non | - | IRQ 33 | MAL Txde | High | Level | Non | - | IRQ 34 | MAL Rxde | High | Level | Non | - | IRQ 35 | PCIE0 bus master VC0 |falling| Edge | Non | - | IRQ 36 | PCIE0 DCR Error | High | Level | Non | - | IRQ 37 | EBC | High |Lvl Edg| Non | - | IRQ 38 | NDFC | High | Level | Non | - | IRQ 39 | GPT Compare Timer 8 | Risin | Edge | Non | - | IRQ 40 | GPT Compare Timer 9 | Risin | Edge | Non | - | IRQ 41 | PCIE1 AL | high | Level | Non | - | IRQ 42 | PCIE1 VPD access | rising| edge | Non | - | IRQ 43 | PCIE1 hot reset request | rising| Edge | Non | - | IRQ 44 | PCIE1 hot reset request | faling| Edge | Non | - | IRQ 45 | PCIE1 TCR | High | Level | Non | - | IRQ 46 | PCIE1 bus master VC0 |falling| Edge | Non | - | IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non | - | IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non | - | IRQ 49 | Ext. IRQ 7 |pgm/Fal|pgm/Lvl| Non | - | IRQ 50 | Ext. IRQ 8 - |pgm (H)|pgm/Lvl| Non | - | IRQ 51 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non | - | IRQ 52 | GPT Compare Timer 5 | high | Edge | Non | - | IRQ 53 | GPT Compare Timer 6 | high | Edge | Non | - | IRQ 54 | GPT Compare Timer 7 | high | Edge | Non | - | IRQ 55 | Serial ROM | High | Level | Non | - | IRQ 56 | GPT Decrement Pulse | High | Level | Non | - | IRQ 57 | Ext. IRQ 2 |pgm/Fal|pgm/Lvl| Non | - | IRQ 58 | Ext. IRQ 5 |pgm/Fal|pgm/Lvl| Non | - | IRQ 59 | Ext. IRQ 6 |pgm/Fal|pgm/Lvl| Non | - | IRQ 60 | EMAC0 Wake-up | High | Level | Non | - | IRQ 61 | Ext. IRQ 1 |pgm/Fal|pgm/Lvl| Non | - | IRQ 62 | EMAC1 Wake-up | High | Level | Non | - |---------------------------------------------------------------------- - | IRQ 64 | PE0 AL | High | Level | Non | - | IRQ 65 | PE0 VPD Access | Risin | Edge | Non | - | IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non | - | IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non | - | IRQ 68 | PE0 TCR | High | Level | Non | - | IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non | - | IRQ 70 | PE0 DCR Error | High | Level | Non | - | IRQ 71 | Reserved | N/A | N/A | Non | - | IRQ 72 | PE1 AL | High | Level | Non | - | IRQ 73 | PE1 VPD Access | Risin | Edge | Non | - | IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non | - | IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non | - | IRQ 76 | PE1 TCR | High | Level | Non | - | IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non | - | IRQ 78 | PE1 DCR Error | High | Level | Non | - | IRQ 79 | Reserved | N/A | N/A | Non | - | IRQ 80 | PE2 AL | High | Level | Non | - | IRQ 81 | PE2 VPD Access | Risin | Edge | Non | - | IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non | - | IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non | - | IRQ 84 | PE2 TCR | High | Level | Non | - | IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non | - | IRQ 86 | PE2 DCR Error | High | Level | Non | - | IRQ 87 | Reserved | N/A | N/A | Non | - | IRQ 88 | External IRQ(5) | Progr | Progr | Non | - | IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non | - | IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non | - | IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non | - | IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non | - | IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non | - | IRQ 94 | Reserved | N/A | N/A | Non | - | IRQ 95 | Reserved | N/A | N/A | Non | - |--------------------------------------------------------------------- - +---------+-----------------------------------+-------+-------+------*/ - /*--------------------------------------------------------------------+ - | Initialise UIC registers. Clear all interrupts. Disable all - | interrupts. - | Set critical interrupt values. Set interrupt polarities. Set - | interrupt trigger levels. Make bit 0 High priority. Clear all - | interrupts again. - +-------------------------------------------------------------------*/ - - mtdcr (UIC2SR, 0xffffffff); /* Clear all interrupts */ - mtdcr (UIC2ER, 0x00000000); /* disable all interrupts */ - mtdcr (UIC2CR, 0x00000000); /* Set Critical / Non Critical interrupts */ - mtdcr (UIC2PR, 0xf7ffffff); /* Set Interrupt Polarities */ - mtdcr (UIC2TR, 0x01e1fff8); /* Set Interrupt Trigger Levels */ - mtdcr (UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ - mtdcr (UIC2SR, 0x00000000); /* clear all interrupts */ - mtdcr (UIC2SR, 0xffffffff); /* clear all interrupts */ - - mtdcr (UIC1SR, 0xffffffff); /* Clear all interrupts */ - mtdcr (UIC1ER, 0x00000000); /* disable all interrupts */ - mtdcr (UIC1CR, 0x00000000); /* Set Critical / Non Critical interrupts */ - mtdcr (UIC1PR, 0xfffac785); /* Set Interrupt Polarities */ - mtdcr (UIC1TR, 0x001d0040); /* Set Interrupt Trigger Levels */ - mtdcr (UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ - mtdcr (UIC1SR, 0x00000000); /* clear all interrupts */ - mtdcr (UIC1SR, 0xffffffff); /* clear all interrupts */ - - mtdcr (UIC0SR, 0xffffffff); /* Clear all interrupts */ - mtdcr (UIC0ER, 0x0000000a); /* Disable all interrupts */ - /* Except cascade UIC0 and UIC1 */ - mtdcr (UIC0CR, 0x00000000); /* Set Critical / Non Critical interrupts */ - mtdcr (UIC0PR, 0xffbfefef); /* Set Interrupt Polarities */ - mtdcr (UIC0TR, 0x00007000); /* Set Interrupt Trigger Levels */ - mtdcr (UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ - mtdcr (UIC0SR, 0x00000000); /* clear all interrupts */ - mtdcr (UIC0SR, 0xffffffff); /* clear all interrupts */ - - /* - * Note: Some cores are still in reset when the chip starts, so - * take them out of reset - */ - mtsdr(SDR0_SRST, 0); - - /* Reset PCIe slots */ - gpio_write_bit(CONFIG_SYS_GPIO_PCIE_RST, 0); - udelay(100); - gpio_write_bit(CONFIG_SYS_GPIO_PCIE_RST, 1); - - /* - * Configure PFC (Pin Function Control) registers - * -> Enable USB - */ - val = SDR0_PFC1_USBEN | SDR0_PFC1_USBBIGEN | SDR0_PFC1_GPT_FREQ; - mtsdr(SDR0_PFC1, val); - - return 0; -} - -int misc_init_r(void) -{ -#ifdef CONFIG_ENV_IS_IN_FLASH - /* Monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - -CONFIG_SYS_MONITOR_LEN, - 0xffffffff, - &flash_info[0]); -#endif - - return 0; -} - -int checkboard (void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - printf("Board: Makalu - AMCC PPC405EX Evaluation Board"); - - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - return (0); -} diff --git a/board/amcc/ocotea/Kconfig b/board/amcc/ocotea/Kconfig deleted file mode 100644 index 18c1a15..0000000 --- a/board/amcc/ocotea/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_OCOTEA - -config SYS_BOARD - default "ocotea" - -config SYS_VENDOR - default "amcc" - -config SYS_CONFIG_NAME - default "ocotea" - -endif diff --git a/board/amcc/ocotea/MAINTAINERS b/board/amcc/ocotea/MAINTAINERS deleted file mode 100644 index 34634a2..0000000 --- a/board/amcc/ocotea/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -OCOTEA BOARD -M: Stefan Roese <sr(a)denx.de> -S: Maintained -F: board/amcc/ocotea/ -F: include/configs/ocotea.h -F: configs/ocotea_defconfig diff --git a/board/amcc/ocotea/Makefile b/board/amcc/ocotea/Makefile deleted file mode 100644 index 7646bbb..0000000 --- a/board/amcc/ocotea/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2002-2006 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = ocotea.o flash.o -extra-y += init.o diff --git a/board/amcc/ocotea/README.ocotea b/board/amcc/ocotea/README.ocotea deleted file mode 100644 index be79b03..0000000 --- a/board/amcc/ocotea/README.ocotea +++ /dev/null @@ -1,73 +0,0 @@ - AMCC Ocotea Board - - Last Update: March 2, 2004 -======================================================================= - -This file contains some handy info regarding U-Boot and the AMCC -Ocotea 440gx evaluation board. See the README.ppc440 for additional -information. - - -SWITCH SETTINGS & JUMPERS -========================== - -Here's what I've been using successfully. If you feel inclined to -change things ... please read the docs! - -DIPSW U46 U80 ------------------------- -SW 1 off off -SW 2 on off -SW 3 off off -SW 4 off off -SW 5 off off -SW 6 on on -SW 7 on off -SW 8 on off - -J41: strapped -J42: open - -All others are factory default. - - -I2C Information -===================== - -See README.ebony for information. - -PCI -=========================== - -Untested at the time of writing. - -PPC440GX Ethernet EMACs -=========================== - -All EMAC ports have been tested and are known to work -with EPS Group 4. - -Special note about the Cicada CIS8201: - The CIS8201 Gigabit PHY comes up in GMII mode by default. - One must hit an extended register to allow use of RGMII mode. - This has been done in the 440gx_enet.c file with a #ifdef/endif - pair. - -AMCC does not store the EMAC ethernet addresses within their PIBS bootloader. -The addresses contained in the config header file are from my particular -board and you _*should*_ change them to reflect your board either in the -config file and/or in your environment variables. I found the addresses on -labels on the bottom side of the board. - - -BDI2k or JTAG Debugging -=========================== - -For ease of debugging you can swap the small boot flash and external SRAM -by changing U46:3 to on. You can then use the sram as your boot flash by -loading the sram via the jtag debugger. - - -Regards, ---Travis -<tsawyer(a)sandburst.com> diff --git a/board/amcc/ocotea/README.ocotea-PIBS-to-U-Boot b/board/amcc/ocotea/README.ocotea-PIBS-to-U-Boot deleted file mode 100644 index 25dd2a2..0000000 --- a/board/amcc/ocotea/README.ocotea-PIBS-to-U-Boot +++ /dev/null @@ -1,99 +0,0 @@ ------------------------------------------- -Installation of U-Boot using PIBS firmware ------------------------------------------- - -This document describes how to install U-Boot on the Ocotea PPC440GX -Evaluation Board. We do not erase the PIBS firmware but install U-Boot in the -soldered FLASH. After this you should be able to switch between PIBS and -U-Boot via the switch U46 SW1. Please check that SW1 is off (= open) before -continuing. - -Connect to the serial port 0 (J11 lower) of the Ocotea board using the cu -program. See the hints for configuring cu above. Make sure you can -communicate with the PIBS firmware: reset the board and hit ENTER a couple of -times until you see the PIBS prompt (PIBS $). Then proceed as follows: - - -Read MAC Addresses from PIBS ----------------------------- - -To read the configured MAC addresses available on your Ocotea board please use -the following commands: - -PIBS $ echo $hwdaddr0 -000173017FE3 -PIBS $ echo $hwdaddr1 -000173017FE4 -PIBS $ echo $hwdaddr2 -000173017FE1 -PIBS $ echo $hwdaddr3 -000173017FE2 - -In U-Boot this is stored in the following environment variables: - -* Ethernet Address 0: ethaddr = 000173017FE3 (==> 00:01:73:01:7F:E3) -* Ethernet Address 1: eth1addr = 000173017FE4 (==> 00:01:73:01:7F:E4) -* Ethernet Address 2: eth2addr = 000173017FE1 (==> 00:01:73:01:7F:E1) -* Ethernet Address 3: eth3addr = 000173017FE2 (==> 00:01:73:01:7F:E2) - - -Configure the network interface (ent0 == emac0) ------------------------------------------------ - -To download the U-Boot image we need to configure the ethernet interface with -the following commands: - -PIBS $ ifconfig ent0 192.168.160.142 netmask 255.255.0.0 up -PIBS $ set ipdstaddr0=192.168.1.1 -status: writing PIBS variable value to FLASH -PIBS $ set bootfilename=/tftpboot/ocotea/u-boot.bin -status: writing PIBS variable value to FLASH - -Please insert correct parameters for your configuration (ip-addresses and -file-location). - - -Program U-Boot into soldered User-FLASH ---------------------------------------- - -Please make sure to use a newer version of U-Boot (at least 1.1.3), since -older versions don't support running from user-FLASH. - -To program U-Boot into the soldered user-FLASH use the following command: - -PIBS $ storefile bin eth 0xffbc0000 - -This commands loads the file vis ethernet into ram and copies it into the -user-FLASH. - - -Switch to U-Boot ----------------- - -Now you can turn your board off and switch SW1 (U46) to on (= closed). After -powering the board you should see the following message: - -U-Boot 1.1.3 (Apr 5 2005 - 22:59:57) - -AMCC PowerPC 440 GX Rev. C -Board: AMCC 440GX Evaluation Board - VCO: 1066 MHz - CPU: 533 MHz - PLB: 152 MHz - OPB: 76 MHz - EPB: 76 MHz -I2C: ready -DRAM: 256 MB -FLASH: 5 MB -PCI: Bus Dev VenId DevId Class Int -In: serial -Out: serial -Err: serial -KGDB: kgdb ready -ready -Net: ppc_440x_eth0, ppc_440x_eth1, ppc_440x_eth2, ppc_440x_eth3 -BEDBUG:ready -=> - - -April 06 2005, Stefan Roese <sr(a)denx.de> diff --git a/board/amcc/ocotea/config.mk b/board/amcc/ocotea/config.mk deleted file mode 100644 index e19b561..0000000 --- a/board/amcc/ocotea/config.mk +++ /dev/null @@ -1,20 +0,0 @@ -# -# (C) Copyright 2004 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# AMCC 440GX Reference Platform (Ocotea) board -# - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif diff --git a/board/amcc/ocotea/flash.c b/board/amcc/ocotea/flash.c deleted file mode 100644 index a9bbf04..0000000 --- a/board/amcc/ocotea/flash.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * (C) Copyright 2004-2005 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * (C) Copyright 2002 Jun Gu <jung(a)artesyncp.com> - * Add support for Am29F016D and dynamic switch setting. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Modified 4/5/2001 - * Wait for completion of each sector erase command issued - * 4/5/2001 - * Chris Hallinan - DS4.COM, Inc. - clh(a)net1plus.com - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/processor.h> - -#undef DEBUG - -#ifdef DEBUG -#define DEBUGF(x...) printf(x) -#else -#define DEBUGF(x...) -#endif /* DEBUG */ - -#define BOOT_SMALL_FLASH 0x40 /* 01000000 */ -#define FLASH_ONBD_N 2 /* 00000010 */ -#define FLASH_SRAM_SEL 1 /* 00000001 */ -#define FLASH_ONBD_N 2 /* 00000010 */ -#define FLASH_SRAM_SEL 1 /* 00000001 */ - -#define BOOT_SMALL_FLASH_VAL 4 -#define FLASH_ONBD_N_VAL 2 -#define FLASH_SRAM_SEL_VAL 1 - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -static unsigned long flash_addr_table[8][CONFIG_SYS_MAX_FLASH_BANKS] = { - {0xFF800000, 0xFF880000, 0xFFC00000}, /* 0:000: configuraton 4 */ - {0xFF900000, 0xFF980000, 0xFFC00000}, /* 1:001: configuraton 3 */ - {0x00000000, 0x00000000, 0x00000000}, /* 2:010: configuraton 8 */ - {0x00000000, 0x00000000, 0x00000000}, /* 3:011: configuraton 7 */ - {0xFFE00000, 0xFFF00000, 0xFF800000}, /* 4:100: configuraton 2 */ - {0xFFF00000, 0xFFF80000, 0xFF800000}, /* 5:101: configuraton 1 */ - {0x00000000, 0x00000000, 0x00000000}, /* 6:110: configuraton 6 */ - {0x00000000, 0x00000000, 0x00000000} /* 7:111: configuraton 5 */ -}; - -/* - * include common flash code (for amcc boards) - */ -#include "../common/flash.c" - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(vu_long * addr, flash_info_t * info); -static int write_word(flash_info_t * info, ulong dest, ulong data); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init(void) -{ - unsigned long total_b = 0; - unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS]; - unsigned char *fpga_base = (unsigned char *)CONFIG_SYS_FPGA_BASE; - unsigned char switch_status; - unsigned short index = 0; - int i; - - /* read FPGA base register FPGA_REG0 */ - switch_status = *fpga_base; - - /* check the bitmap of switch status */ - if (switch_status & BOOT_SMALL_FLASH) { - index += BOOT_SMALL_FLASH_VAL; - } - if (switch_status & FLASH_ONBD_N) { - index += FLASH_ONBD_N_VAL; - } - if (switch_status & FLASH_SRAM_SEL) { - index += FLASH_SRAM_SEL_VAL; - } - - DEBUGF("\n"); - DEBUGF("FLASH: Index: %d\n", index); - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].sector_count = -1; - flash_info[i].size = 0; - - /* check whether the address is 0 */ - if (flash_addr_table[index][i] == 0) { - continue; - } - - /* call flash_get_size() to initialize sector address */ - size_b[i] = - flash_get_size((vu_long *) flash_addr_table[index][i], - &flash_info[i]); - flash_info[i].size = size_b[i]; - if (flash_info[i].flash_id == FLASH_UNKNOWN) { - printf - ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", - i, size_b[i], size_b[i] << 20); - flash_info[i].sector_count = -1; - flash_info[i].size = 0; - } - - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1, - &flash_info[i]); -#ifdef CONFIG_ENV_IS_IN_FLASH - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[i]); - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[i]); -#endif - - total_b += flash_info[i].size; - } - - return total_b; -} diff --git a/board/amcc/ocotea/init.S b/board/amcc/ocotea/init.S deleted file mode 100644 index 35085f0..0000000 --- a/board/amcc/ocotea/init.S +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2002 Scott McNutt <smcnutt(a)artesyncp.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <ppc_asm.tmpl> -#include <config.h> -#include <asm/mmu.h> -#include <asm/ppc4xx.h> - -/************************************************************************** - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - *************************************************************************/ - - .section .bootpg,"ax" - .globl tlbtab - -tlbtab: - tlbtab_start - - tlbentry(0xf0000000, SZ_256M, 0xf0000000, 1, AC_RWX | SA_IG) - - /* - * TLB entries for SDRAM are not needed on this platform. - * They are dynamically generated in the SPD DDR(2) detection - * routine. - */ - - tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_RWX) - tlbentry(CONFIG_SYS_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_RWX) - tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_RW | SA_IG) - tlbtab_end diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c deleted file mode 100644 index 5f11f19..0000000 --- a/board/amcc/ocotea/ocotea.c +++ /dev/null @@ -1,387 +0,0 @@ -/* - * Copyright (C) 2004 PaulReynolds(a)lhsolutions.com - * - * (C) Copyright 2005 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#include <common.h> -#include "ocotea.h" -#include <asm/processor.h> -#include <spd_sdram.h> -#include <asm/ppc4xx-emac.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define BOOT_SMALL_FLASH 32 /* 00100000 */ -#define FLASH_ONBD_N 2 /* 00000010 */ -#define FLASH_SRAM_SEL 1 /* 00000001 */ - -long int fixed_sdram (void); -void fpga_init (void); - -int board_early_init_f (void) -{ - unsigned long mfr; - unsigned char *fpga_base = (unsigned char *) CONFIG_SYS_FPGA_BASE; - unsigned char switch_status; - unsigned long cs0_base; - unsigned long cs0_size; - unsigned long cs0_twt; - unsigned long cs2_base; - unsigned long cs2_size; - unsigned long cs2_twt; - - /*-------------------------------------------------------------------------+ - | Initialize EBC CONFIG - +-------------------------------------------------------------------------*/ - mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK | - EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK | - EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | - EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT | - EBC_CFG_PME_DISABLE | EBC_CFG_PR_32); - - /*-------------------------------------------------------------------------+ - | FPGA. Initialize bank 7 with default values. - +-------------------------------------------------------------------------*/ - mtebc(PB7AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(7)| - EBC_BXAP_BCE_DISABLE| - EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)| - EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)| - EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED| - EBC_BXAP_BEM_WRITEONLY| - EBC_BXAP_PEN_DISABLED); - mtebc(PB7CR, EBC_BXCR_BAS_ENCODE(0x48300000)| - EBC_BXCR_BS_1MB|EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT); - - /* read FPGA base register FPGA_REG0 */ - switch_status = *fpga_base; - - if (switch_status & 0x40) { - cs0_base = 0xFFE00000; - cs0_size = EBC_BXCR_BS_2MB; - cs0_twt = 8; - cs2_base = 0xFF800000; - cs2_size = EBC_BXCR_BS_4MB; - cs2_twt = 10; - } else { - cs0_base = 0xFFC00000; - cs0_size = EBC_BXCR_BS_4MB; - cs0_twt = 10; - cs2_base = 0xFF800000; - cs2_size = EBC_BXCR_BS_2MB; - cs2_twt = 8; - } - - /*-------------------------------------------------------------------------+ - | 1 MB FLASH / 1 MB SRAM. Initialize bank 0 with default values. - +-------------------------------------------------------------------------*/ - mtebc(PB0AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(cs0_twt)| - EBC_BXAP_BCE_DISABLE| - EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)| - EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)| - EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED| - EBC_BXAP_BEM_WRITEONLY| - EBC_BXAP_PEN_DISABLED); - mtebc(PB0CR, EBC_BXCR_BAS_ENCODE(cs0_base)| - cs0_size|EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT); - - /*-------------------------------------------------------------------------+ - | 8KB NVRAM/RTC. Initialize bank 1 with default values. - +-------------------------------------------------------------------------*/ - mtebc(PB1AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(10)| - EBC_BXAP_BCE_DISABLE| - EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)| - EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)| - EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED| - EBC_BXAP_BEM_WRITEONLY| - EBC_BXAP_PEN_DISABLED); - mtebc(PB1CR, EBC_BXCR_BAS_ENCODE(0x48000000)| - EBC_BXCR_BS_1MB|EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT); - - /*-------------------------------------------------------------------------+ - | 4 MB FLASH. Initialize bank 2 with default values. - +-------------------------------------------------------------------------*/ - mtebc(PB2AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(cs2_twt)| - EBC_BXAP_BCE_DISABLE| - EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)| - EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)| - EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED| - EBC_BXAP_BEM_WRITEONLY| - EBC_BXAP_PEN_DISABLED); - mtebc(PB2CR, EBC_BXCR_BAS_ENCODE(cs2_base)| - cs2_size|EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT); - - /*-------------------------------------------------------------------------+ - | FPGA. Initialize bank 7 with default values. - +-------------------------------------------------------------------------*/ - mtebc(PB7AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(7)| - EBC_BXAP_BCE_DISABLE| - EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)| - EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)| - EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED| - EBC_BXAP_BEM_WRITEONLY| - EBC_BXAP_PEN_DISABLED); - mtebc(PB7CR, EBC_BXCR_BAS_ENCODE(0x48300000)| - EBC_BXCR_BS_1MB|EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT); - - /*-------------------------------------------------------------------- - * Setup the interrupt controller polarities, triggers, etc. - *-------------------------------------------------------------------*/ - /* - * Because of the interrupt handling rework to handle 440GX interrupts - * with the common code, we needed to change names of the UIC registers. - * Here the new relationship: - * - * U-Boot name 440GX name - * ----------------------- - * UIC0 UICB0 - * UIC1 UIC0 - * UIC2 UIC1 - * UIC3 UIC2 - */ - mtdcr (UIC1SR, 0xffffffff); /* clear all */ - mtdcr (UIC1ER, 0x00000000); /* disable all */ - mtdcr (UIC1CR, 0x00000009); /* SMI & UIC1 crit are critical */ - mtdcr (UIC1PR, 0xfffffe13); /* per ref-board manual */ - mtdcr (UIC1TR, 0x01c00008); /* per ref-board manual */ - mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (UIC1SR, 0xffffffff); /* clear all */ - - mtdcr (UIC2SR, 0xffffffff); /* clear all */ - mtdcr (UIC2ER, 0x00000000); /* disable all */ - mtdcr (UIC2CR, 0x00000000); /* all non-critical */ - mtdcr (UIC2PR, 0xffffe0ff); /* per ref-board manual */ - mtdcr (UIC2TR, 0x00ffc000); /* per ref-board manual */ - mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (UIC2SR, 0xffffffff); /* clear all */ - - mtdcr (UIC3SR, 0xffffffff); /* clear all */ - mtdcr (UIC3ER, 0x00000000); /* disable all */ - mtdcr (UIC3CR, 0x00000000); /* all non-critical */ - mtdcr (UIC3PR, 0xffffffff); /* per ref-board manual */ - mtdcr (UIC3TR, 0x00ff8c0f); /* per ref-board manual */ - mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (UIC3SR, 0xffffffff); /* clear all */ - - mtdcr (UIC0SR, 0xfc000000); /* clear all */ - mtdcr (UIC0ER, 0x00000000); /* disable all */ - mtdcr (UIC0CR, 0x00000000); /* all non-critical */ - mtdcr (UIC0PR, 0xfc000000); /* */ - mtdcr (UIC0TR, 0x00000000); /* */ - mtdcr (UIC0VR, 0x00000001); /* */ - mfsdr (SDR0_MFR, mfr); - mfr &= ~SDR0_MFR_ECS_MASK; -/* mtsdr(SDR0_MFR, mfr); */ - fpga_init(); - - return 0; -} - - -int checkboard (void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - printf ("Board: Ocotea - AMCC PPC440GX Evaluation Board"); - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc ('\n'); - - return (0); -} - - -phys_size_t initdram (int board_type) -{ - long dram_size = 0; - -#if defined(CONFIG_SPD_EEPROM) - dram_size = spd_sdram (); -#else - dram_size = fixed_sdram (); -#endif - return dram_size; -} - - -#if !defined(CONFIG_SPD_EEPROM) -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - * - * Assumes: 128 MB, non-ECC, non-registered - * PLB @ 133 MHz - * - ************************************************************************/ -long int fixed_sdram (void) -{ - uint reg; - - /*-------------------------------------------------------------------- - * Setup some default - *------------------------------------------------------------------*/ - mtsdram (SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */ - mtsdram (SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ - mtsdram (SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */ - mtsdram (SDRAM0_WDDCTR, 0x00000000); /* wrcp=0 dcd=0 */ - mtsdram (SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ - - /*-------------------------------------------------------------------- - * Setup for board-specific specific mem - *------------------------------------------------------------------*/ - /* - * Following for CAS Latency = 2.5 @ 133 MHz PLB - */ - mtsdram (SDRAM0_B0CR, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */ - mtsdram (SDRAM0_TR0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */ - /* RA=10 RD=3 */ - mtsdram (SDRAM0_TR1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */ - mtsdram (SDRAM0_RTR, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */ - mtsdram (SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM */ - udelay (400); /* Delay 200 usecs (min) */ - - /*-------------------------------------------------------------------- - * Enable the controller, then wait for DCEN to complete - *------------------------------------------------------------------*/ - mtsdram (SDRAM0_CFG0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */ - for (;;) { - mfsdram (SDRAM0_MCSTS, reg); - if (reg & 0x80000000) - break; - } - - return (128 * 1024 * 1024); /* 128 MB */ -} -#endif /* !defined(CONFIG_SPD_EEPROM) */ - -void fpga_init(void) -{ - unsigned long group; - unsigned long sdr0_pfc0; - unsigned long sdr0_pfc1; - unsigned long sdr0_cust0; - unsigned long pvr; - - mfsdr (SDR0_PFC0, sdr0_pfc0); - mfsdr (SDR0_PFC1, sdr0_pfc1); - group = SDR0_PFC1_EPS_DECODE(sdr0_pfc1); - pvr = get_pvr (); - - sdr0_pfc0 = (sdr0_pfc0 & ~SDR0_PFC0_GEIE_MASK) | SDR0_PFC0_GEIE_TRE; - if ( ((pvr == PVR_440GX_RA) || (pvr == PVR_440GX_RB)) && ((group == 4) || (group == 5))) { - sdr0_pfc0 = (sdr0_pfc0 & ~SDR0_PFC0_TRE_MASK) | SDR0_PFC0_TRE_DISABLE; - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_CTEMS_MASK) | SDR0_PFC1_CTEMS_EMS; - out8(FPGA_REG2, (in8(FPGA_REG2) & ~FPGA_REG2_EXT_INTFACE_MASK) | - FPGA_REG2_EXT_INTFACE_ENABLE); - mtsdr (SDR0_PFC0, sdr0_pfc0); - mtsdr (SDR0_PFC1, sdr0_pfc1); - } else { - sdr0_pfc0 = (sdr0_pfc0 & ~SDR0_PFC0_TRE_MASK) | SDR0_PFC0_TRE_ENABLE; - switch (group) - { - case 0: - case 1: - case 2: - /* CPU trace A */ - out8(FPGA_REG2, (in8(FPGA_REG2) & ~FPGA_REG2_EXT_INTFACE_MASK) | - FPGA_REG2_EXT_INTFACE_ENABLE); - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_CTEMS_MASK) | SDR0_PFC1_CTEMS_EMS; - mtsdr (SDR0_PFC0, sdr0_pfc0); - mtsdr (SDR0_PFC1, sdr0_pfc1); - break; - case 3: - case 4: - case 5: - case 6: - /* CPU trace B - Over EBMI */ - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_CTEMS_MASK) | SDR0_PFC1_CTEMS_CPUTRACE; - mtsdr (SDR0_PFC0, sdr0_pfc0); - mtsdr (SDR0_PFC1, sdr0_pfc1); - out8(FPGA_REG2, (in8(FPGA_REG2) & ~FPGA_REG2_EXT_INTFACE_MASK) | - FPGA_REG2_EXT_INTFACE_DISABLE); - break; - } - } - - /* Initialize the ethernet specific functions in the fpga */ - mfsdr(SDR0_PFC1, sdr0_pfc1); - mfsdr(SDR0_CUST0, sdr0_cust0); - if ( (SDR0_PFC1_EPS_DECODE(sdr0_pfc1) == 4) && - ((SDR0_CUST0_RGMII2_DECODE(sdr0_cust0) == RGMII_FER_GMII) || - (SDR0_CUST0_RGMII2_DECODE(sdr0_cust0) == RGMII_FER_TBI))) - { - if ((in8(FPGA_REG0) & FPGA_REG0_ECLS_MASK) == FPGA_REG0_ECLS_VER1) - { - out8(FPGA_REG3, (in8(FPGA_REG3) & ~FPGA_REG3_ENET_MASK1) | - FPGA_REG3_ENET_GROUP7); - } - else - { - if (SDR0_CUST0_RGMII2_DECODE(sdr0_cust0) == RGMII_FER_GMII) - { - out8(FPGA_REG3, (in8(FPGA_REG3) & ~FPGA_REG3_ENET_MASK2) | - FPGA_REG3_ENET_GROUP7); - } - else - { - out8(FPGA_REG3, (in8(FPGA_REG3) & ~FPGA_REG3_ENET_MASK2) | - FPGA_REG3_ENET_GROUP8); - } - } - } - else - { - if ((in8(FPGA_REG0) & FPGA_REG0_ECLS_MASK) == FPGA_REG0_ECLS_VER1) - { - out8(FPGA_REG3, (in8(FPGA_REG3) & ~FPGA_REG3_ENET_MASK1) | - FPGA_REG3_ENET_ENCODE1(SDR0_PFC1_EPS_DECODE(sdr0_pfc1))); - } - else - { - out8(FPGA_REG3, (in8(FPGA_REG3) & ~FPGA_REG3_ENET_MASK2) | - FPGA_REG3_ENET_ENCODE2(SDR0_PFC1_EPS_DECODE(sdr0_pfc1))); - } - } - out8(FPGA_REG4, FPGA_REG4_GPHY_MODE10 | - FPGA_REG4_GPHY_MODE100 | FPGA_REG4_GPHY_MODE1000 | - FPGA_REG4_GPHY_FRC_DPLX | FPGA_REG4_CONNECT_PHYS); - - /* reset the gigabyte phy if necessary */ - if (SDR0_PFC1_EPS_DECODE(sdr0_pfc1) >= 3) - { - if ((in8(FPGA_REG0) & FPGA_REG0_ECLS_MASK) == FPGA_REG0_ECLS_VER1) - { - out8(FPGA_REG3, in8(FPGA_REG3) & ~FPGA_REG3_GIGABIT_RESET_DISABLE); - udelay(10000); - out8(FPGA_REG3, in8(FPGA_REG3) | FPGA_REG3_GIGABIT_RESET_DISABLE); - } - else - { - out8(FPGA_REG2, in8(FPGA_REG2) & ~FPGA_REG2_GIGABIT_RESET_DISABLE); - udelay(10000); - out8(FPGA_REG2, in8(FPGA_REG2) | FPGA_REG2_GIGABIT_RESET_DISABLE); - } - } - - /* - * new Ocotea with Rev. F (pass 3) chips has SMII PHY reset - */ - if ((in8(FPGA_REG0) & FPGA_REG0_ECLS_MASK) == FPGA_REG0_ECLS_VER2) { - out8(FPGA_REG2, in8(FPGA_REG2) & ~FPGA_REG2_SMII_RESET_DISABLE); - udelay(10000); - out8(FPGA_REG2, in8(FPGA_REG2) | FPGA_REG2_SMII_RESET_DISABLE); - } - - /* Turn off the LED's */ - out8(FPGA_REG3, (in8(FPGA_REG3) & ~FPGA_REG3_STAT_MASK) | - FPGA_REG3_STAT_LED8_DISAB | FPGA_REG3_STAT_LED4_DISAB | - FPGA_REG3_STAT_LED2_DISAB | FPGA_REG3_STAT_LED1_DISAB); - - return; -} diff --git a/board/amcc/ocotea/ocotea.h b/board/amcc/ocotea/ocotea.h deleted file mode 100644 index 853002f..0000000 --- a/board/amcc/ocotea/ocotea.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* Board specific FPGA stuff ... */ -#define FPGA_REG0 (CONFIG_SYS_FPGA_BASE + 0x00) -#define FPGA_REG0_SSCG_MASK 0x80 -#define FPGA_REG0_SSCG_DISABLE 0x00 -#define FPGA_REG0_SSCG_ENABLE 0x80 -#define FPGA_REG0_BOOT_MASK 0x40 -#define FPGA_REG0_BOOT_LARGE_FLASH 0x00 -#define FPGA_REG0_BOOT_SMALL_FLASH 0x40 -#define FPGA_REG0_ECLS_MASK 0x38 /* New for Ocotea Rev 2 */ -#define FPGA_REG0_ECLS_0 0x20 /* New for Ocotea Rev 2 */ -#define FPGA_REG0_ECLS_1 0x10 /* New for Ocotea Rev 2 */ -#define FPGA_REG0_ECLS_2 0x08 /* New for Ocotea Rev 2 */ -#define FPGA_REG0_ECLS_VER1 0x00 /* New for Ocotea Rev 2 */ -#define FPGA_REG0_ECLS_VER3 0x08 /* New for Ocotea Rev 2 */ -#define FPGA_REG0_ECLS_VER4 0x10 /* New for Ocotea Rev 2 */ -#define FPGA_REG0_ECLS_VER5 0x18 /* New for Ocotea Rev 2 */ -#define FPGA_REG0_ECLS_VER2 0x20 /* New for Ocotea Rev 2 */ -#define FPGA_REG0_ECLS_VER6 0x28 /* New for Ocotea Rev 2 */ -#define FPGA_REG0_ECLS_VER7 0x30 /* New for Ocotea Rev 2 */ -#define FPGA_REG0_ECLS_VER8 0x38 /* New for Ocotea Rev 2 */ -#define FPGA_REG0_ARBITER_MASK 0x04 -#define FPGA_REG0_ARBITER_EXT 0x00 -#define FPGA_REG0_ARBITER_INT 0x04 -#define FPGA_REG0_ONBOARD_FLASH_MASK 0x02 -#define FPGA_REG0_ONBOARD_FLASH_ENABLE 0x00 -#define FPGA_REG0_ONBOARD_FLASH_DISABLE 0x02 -#define FPGA_REG0_FLASH 0x01 -#define FPGA_REG1 (CONFIG_SYS_FPGA_BASE + 0x01) -#define FPGA_REG1_9772_FSELFBX_MASK 0x80 -#define FPGA_REG1_9772_FSELFBX_6 0x00 -#define FPGA_REG1_9772_FSELFBX_10 0x80 -#define FPGA_REG1_9531_SX_MASK 0x60 -#define FPGA_REG1_9531_SX_33MHZ 0x00 -#define FPGA_REG1_9531_SX_100MHZ 0x20 -#define FPGA_REG1_9531_SX_66MHZ 0x40 -#define FPGA_REG1_9531_SX_133MHZ 0x60 -#define FPGA_REG1_9772_FSELBX_MASK 0x18 -#define FPGA_REG1_9772_FSELBX_4 0x00 -#define FPGA_REG1_9772_FSELBX_6 0x08 -#define FPGA_REG1_9772_FSELBX_8 0x10 -#define FPGA_REG1_9772_FSELBX_10 0x18 -#define FPGA_REG1_SOURCE_MASK 0x07 -#define FPGA_REG1_SOURCE_TC 0x00 -#define FPGA_REG1_SOURCE_66MHZ 0x01 -#define FPGA_REG1_SOURCE_50MHZ 0x02 -#define FPGA_REG1_SOURCE_33MHZ 0x03 -#define FPGA_REG1_SOURCE_25MHZ 0x04 -#define FPGA_REG1_SOURCE_SSDIV1 0x05 -#define FPGA_REG1_SOURCE_SSDIV2 0x06 -#define FPGA_REG1_SOURCE_SSDIV4 0x07 -#define FPGA_REG2 (CONFIG_SYS_FPGA_BASE + 0x02) -#define FPGA_REG2_TC0 0x80 -#define FPGA_REG2_TC1 0x40 -#define FPGA_REG2_TC2 0x20 -#define FPGA_REG2_TC3 0x10 -#define FPGA_REG2_GIGABIT_RESET_DISABLE 0x08 /*Use on Ocotea pass 2 boards*/ -#define FPGA_REG2_EXT_INTFACE_MASK 0x04 -#define FPGA_REG2_EXT_INTFACE_ENABLE 0x00 -#define FPGA_REG2_EXT_INTFACE_DISABLE 0x04 -#define FPGA_REG2_SMII_RESET_DISABLE 0x02 /*Use on Ocotea pass 3 boards*/ -#define FPGA_REG2_DEFAULT_UART1_N 0x01 -#define FPGA_REG3 (CONFIG_SYS_FPGA_BASE + 0x03) -#define FPGA_REG3_GIGABIT_RESET_DISABLE 0x80 /*Use on Ocotea pass 1 boards*/ -#define FPGA_REG3_ENET_MASK1 0x70 /*Use on Ocotea pass 1 boards*/ -#define FPGA_REG3_ENET_MASK2 0xF0 /*Use on Ocotea pass 2 boards*/ -#define FPGA_REG3_ENET_GROUP0 0x00 -#define FPGA_REG3_ENET_GROUP1 0x10 -#define FPGA_REG3_ENET_GROUP2 0x20 -#define FPGA_REG3_ENET_GROUP3 0x30 -#define FPGA_REG3_ENET_GROUP4 0x40 -#define FPGA_REG3_ENET_GROUP5 0x50 -#define FPGA_REG3_ENET_GROUP6 0x60 -#define FPGA_REG3_ENET_GROUP7 0x70 -#define FPGA_REG3_ENET_GROUP8 0x80 /*Use on Ocotea pass 2 boards*/ -#define FPGA_REG3_ENET_ENCODE1(n) ((((unsigned long)(n))&0x07)<<4) /*pass1*/ -#define FPGA_REG3_ENET_DECODE1(n) ((((unsigned long)(n))>>4)&0x07) /*pass1*/ -#define FPGA_REG3_ENET_ENCODE2(n) ((((unsigned long)(n))&0x0F)<<4) /*pass2*/ -#define FPGA_REG3_ENET_DECODE2(n) ((((unsigned long)(n))>>4)&0x0F) /*pass2*/ -#define FPGA_REG3_STAT_MASK 0x0F -#define FPGA_REG3_STAT_LED8_ENAB 0x08 -#define FPGA_REG3_STAT_LED4_ENAB 0x04 -#define FPGA_REG3_STAT_LED2_ENAB 0x02 -#define FPGA_REG3_STAT_LED1_ENAB 0x01 -#define FPGA_REG3_STAT_LED8_DISAB 0x00 -#define FPGA_REG3_STAT_LED4_DISAB 0x00 -#define FPGA_REG3_STAT_LED2_DISAB 0x00 -#define FPGA_REG3_STAT_LED1_DISAB 0x00 -#define FPGA_REG4 (CONFIG_SYS_FPGA_BASE + 0x04) -#define FPGA_REG4_GPHY_MODE10 0x80 -#define FPGA_REG4_GPHY_MODE100 0x40 -#define FPGA_REG4_GPHY_MODE1000 0x20 -#define FPGA_REG4_GPHY_FRC_DPLX 0x10 -#define FPGA_REG4_GPHY_ANEG_DIS 0x08 -#define FPGA_REG4_CONNECT_PHYS 0x04 - - -#define SDR0_CUST0_ENET3_MASK 0x00000080 -#define SDR0_CUST0_ENET3_COPPER 0x00000000 -#define SDR0_CUST0_ENET3_FIBER 0x00000080 -#define SDR0_CUST0_RGMII3_MASK 0x00000070 -#define SDR0_CUST0_RGMII3_ENCODE(n) ((((unsigned long)(n))&0x7)<<4) -#define SDR0_CUST0_RGMII3_DECODE(n) ((((unsigned long)(n))>>4)&0x07) -#define SDR0_CUST0_RGMII3_DISAB 0x00000000 -#define SDR0_CUST0_RGMII3_RTBI 0x00000040 -#define SDR0_CUST0_RGMII3_RGMII 0x00000050 -#define SDR0_CUST0_RGMII3_TBI 0x00000060 -#define SDR0_CUST0_RGMII3_GMII 0x00000070 -#define SDR0_CUST0_ENET2_MASK 0x00000008 -#define SDR0_CUST0_ENET2_COPPER 0x00000000 -#define SDR0_CUST0_ENET2_FIBER 0x00000008 -#define SDR0_CUST0_RGMII2_MASK 0x00000007 -#define SDR0_CUST0_RGMII2_ENCODE(n) ((((unsigned long)(n))&0x7)<<0) -#define SDR0_CUST0_RGMII2_DECODE(n) ((((unsigned long)(n))>>0)&0x07) -#define SDR0_CUST0_RGMII2_DISAB 0x00000000 -#define SDR0_CUST0_RGMII2_RTBI 0x00000004 -#define SDR0_CUST0_RGMII2_RGMII 0x00000005 -#define SDR0_CUST0_RGMII2_TBI 0x00000006 -#define SDR0_CUST0_RGMII2_GMII 0x00000007 diff --git a/board/amcc/redwood/Kconfig b/board/amcc/redwood/Kconfig deleted file mode 100644 index d710590..0000000 --- a/board/amcc/redwood/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_REDWOOD - -config SYS_BOARD - default "redwood" - -config SYS_VENDOR - default "amcc" - -config SYS_CONFIG_NAME - default "redwood" - -endif diff --git a/board/amcc/redwood/MAINTAINERS b/board/amcc/redwood/MAINTAINERS deleted file mode 100644 index 756b301..0000000 --- a/board/amcc/redwood/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -REDWOOD BOARD -M: Feng Kan <fkan(a)amcc.com> -S: Maintained -F: board/amcc/redwood/ -F: include/configs/redwood.h -F: configs/redwood_defconfig diff --git a/board/amcc/redwood/Makefile b/board/amcc/redwood/Makefile deleted file mode 100644 index 2bc632b..0000000 --- a/board/amcc/redwood/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2008 -# Feng Kan, Applied Micro Circuits Corp., fkan(a)amcc.com. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = redwood.o -extra-y += init.o diff --git a/board/amcc/redwood/config.mk b/board/amcc/redwood/config.mk deleted file mode 100644 index 42b3e5f..0000000 --- a/board/amcc/redwood/config.mk +++ /dev/null @@ -1,20 +0,0 @@ -# -# (C) Copyright 2008 -# Feng Kan, Applied Micro Circuits Corp., fkan(a)amcc.com. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# AMCC 460SX Reference Platform (redwood) board -# - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif diff --git a/board/amcc/redwood/init.S b/board/amcc/redwood/init.S deleted file mode 100644 index fd05130..0000000 --- a/board/amcc/redwood/init.S +++ /dev/null @@ -1,62 +0,0 @@ -/* - * (C) Copyright 2008 - * Feng Kan, Applied Micro Circuits Corp., fkan(a)amcc.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <ppc_asm.tmpl> -#include <config.h> -#include <asm/mmu.h> -#include <asm/ppc4xx.h> - -/************************************************************************** - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - *************************************************************************/ - - .section .bootpg,"ax" - .globl tlbtab -tlbtab: - tlbtab_start - - /* - * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the - * speed up boot process. It is patched after relocation to enable SA_I - */ - tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_RWX | SA_G) - - /* - * TLB entries for SDRAM are not needed on this platform. - * They are dynamically generated in the SPD DDR(2) detection - * routine. - */ - - /* Although 512 KB, map 256k at a time */ - tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_RWX | SA_I) - tlbentry(CONFIG_SYS_ISRAM_BASE + 0x40000, SZ_256K, 0x00040000, 4, AC_RWX | SA_I) - - tlbentry(CONFIG_SYS_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_RWX | SA_IG) - - /* - * Peripheral base - */ - tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_16K, 0xEF600000, 4, AC_RW | SA_IG) - - tlbentry(CONFIG_SYS_PCIE0_XCFGBASE,SZ_16M, 0x00000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE1_XCFGBASE,SZ_16M, 0x10000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE2_XCFGBASE,SZ_16M, 0x20000000, 0xC, AC_RW | SA_IG) - - tlbentry(CONFIG_SYS_PCIE0_MEMBASE, SZ_256M, 0x00000000, 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE1_MEMBASE, SZ_256M, 0x00000000, 0xE, AC_RW | SA_IG) - - tlbentry(CONFIG_SYS_PCIE0_REGBASE, SZ_64K, 0x30000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE1_REGBASE, SZ_64K, 0x30010000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE2_REGBASE, SZ_64K, 0x30020000, 0xC, AC_RW | SA_IG) - tlbtab_end diff --git a/board/amcc/redwood/redwood.c b/board/amcc/redwood/redwood.c deleted file mode 100644 index 15c3884..0000000 --- a/board/amcc/redwood/redwood.c +++ /dev/null @@ -1,440 +0,0 @@ -/* - * This is the main board level file for the Redwood AMCC board. - * - * (C) Copyright 2008 - * Feng Kan, Applied Micro Circuits Corp., fkan(a)amcc.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include "redwood.h" -#include <asm/ppc4xx.h> -#include <asm/processor.h> -#include <i2c.h> -#include <asm/io.h> - -int compare_to_true(char *str); -char *remove_l_w_space(char *in_str); -char *remove_t_w_space(char *in_str); -int get_console_port(void); - -static void early_init_EBC(void); -static int bootdevice_selected(void); -static void early_reinit_EBC(int); -static void early_init_UIC(void); - -/* - * Define Boot devices - */ -#define BOOT_FROM_8BIT_SRAM 0x00 -#define BOOT_FROM_16BIT_SRAM 0x01 -#define BOOT_FROM_32BIT_SRAM 0x02 -#define BOOT_FROM_8BIT_NAND 0x03 -#define BOOT_FROM_16BIT_NOR 0x04 -#define BOOT_DEVICE_UNKNOWN 0xff - -/* - * EBC Devices Characteristics - * Peripheral Bank Access Parameters - EBC_BxAP - * Peripheral Bank Configuration Register - EBC_BxCR - */ - -/* - * 8 bit width SRAM - * BU Value - * BxAP : 0x03800000 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000 - * B0CR : 0xff098000 - BAS = ff0 - 100 11 00 0000000000000 - * B2CR : 0xe7098000 - BAS = e70 - 100 11 00 0000000000000 - */ -#define EBC_BXAP_8BIT_SRAM \ - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(7) | \ - EBC_BXAP_BCE_DISABLE | EBC_BXAP_BCT_2TRANS | \ - EBC_BXAP_CSN_ENCODE(0) | EBC_BXAP_OEN_ENCODE(0) | \ - EBC_BXAP_WBN_ENCODE(0) | EBC_BXAP_WBF_ENCODE(0) | \ - EBC_BXAP_TH_ENCODE(0) | EBC_BXAP_RE_DISABLED | \ - EBC_BXAP_SOR_DELAYED | EBC_BXAP_BEM_WRITEONLY | \ - EBC_BXAP_PEN_DISABLED - -#define EBC_BXAP_16BIT_SRAM EBC_BXAP_8BIT_SRAM -#define EBC_BXAP_32BIT_SRAM EBC_BXAP_8BIT_SRAM - -/* - * NAND flash - * BU Value - * BxAP : 0x048ff240 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000 - * B0CR : 0xff09a000 - BAS = ff0 - 100 11 01 0000000000000 - * B2CR : 0xe709a000 - BAS = e70 - 100 11 01 0000000000000 -*/ -#define EBC_BXAP_NAND \ - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(7) | \ - EBC_BXAP_BCE_DISABLE | EBC_BXAP_BCT_2TRANS | \ - EBC_BXAP_CSN_ENCODE(0) | EBC_BXAP_OEN_ENCODE(0) | \ - EBC_BXAP_WBN_ENCODE(0) | EBC_BXAP_WBF_ENCODE(0) | \ - EBC_BXAP_TH_ENCODE(0) | EBC_BXAP_RE_DISABLED | \ - EBC_BXAP_SOR_DELAYED | EBC_BXAP_BEM_WRITEONLY | \ - EBC_BXAP_PEN_DISABLED - -/* - * NOR flash - * BU Value - * BxAP : 0x048ff240 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000 - * B0CR : 0xff09a000 - BAS = ff0 - 100 11 01 0000000000000 - * B2CR : 0xe709a000 - BAS = e70 - 100 11 01 0000000000000 -*/ -#define EBC_BXAP_NOR \ - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(7) | \ - EBC_BXAP_BCE_DISABLE | EBC_BXAP_BCT_2TRANS | \ - EBC_BXAP_CSN_ENCODE(0) | EBC_BXAP_OEN_ENCODE(0) | \ - EBC_BXAP_WBN_ENCODE(0) | EBC_BXAP_WBF_ENCODE(0) | \ - EBC_BXAP_TH_ENCODE(0) | EBC_BXAP_RE_DISABLED | \ - EBC_BXAP_SOR_DELAYED | EBC_BXAP_BEM_WRITEONLY | \ - EBC_BXAP_PEN_DISABLED - -/* - * FPGA - * BU value : - * B1AP = 0x05895240 - 0 00001011 0 00 10 01 01 01 001 0 0 1 0 00000 - * B1CR = 0xe201a000 - BAS = e20 - 000 11 01 00000000000000 - */ -#define EBC_BXAP_FPGA \ - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(11) | \ - EBC_BXAP_BCE_DISABLE | EBC_BXAP_BCT_2TRANS | \ - EBC_BXAP_CSN_ENCODE(10) | EBC_BXAP_OEN_ENCODE(1) | \ - EBC_BXAP_WBN_ENCODE(1) | EBC_BXAP_WBF_ENCODE(1) | \ - EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_RE_DISABLED | \ - EBC_BXAP_SOR_DELAYED | EBC_BXAP_BEM_RW | \ - EBC_BXAP_PEN_DISABLED - -#define EBC_BXCR_8BIT_SRAM_CS0 \ - EBC_BXCR_BAS_ENCODE(0xFFE00000) | EBC_BXCR_BS_1MB | \ - EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT - -#define EBC_BXCR_32BIT_SRAM_CS0 \ - EBC_BXCR_BAS_ENCODE(0xFFC00000) | EBC_BXCR_BS_1MB | \ - EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT - -#define EBC_BXCR_NAND_CS0 \ - EBC_BXCR_BAS_ENCODE(0xFF000000) | EBC_BXCR_BS_16MB | \ - EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT - -#define EBC_BXCR_16BIT_SRAM_CS0 \ - EBC_BXCR_BAS_ENCODE(0xFFE00000) | EBC_BXCR_BS_2MB | \ - EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT - -#define EBC_BXCR_NOR_CS0 \ - EBC_BXCR_BAS_ENCODE(0xFF000000) | EBC_BXCR_BS_16MB | \ - EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT - -#define EBC_BXCR_NOR_CS1 \ - EBC_BXCR_BAS_ENCODE(0xE0000000) | EBC_BXCR_BS_128MB | \ - EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT - -#define EBC_BXCR_NAND_CS1 \ - EBC_BXCR_BAS_ENCODE(0xE0000000) | EBC_BXCR_BS_128MB | \ - EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT - -#define EBC_BXCR_NAND_CS2 \ - EBC_BXCR_BAS_ENCODE(0xC0000000) | EBC_BXCR_BS_128MB | \ - EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT - -#define EBC_BXCR_SRAM_CS2 \ - EBC_BXCR_BAS_ENCODE(0xC0000000) | EBC_BXCR_BS_4MB | \ - EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT - -#define EBC_BXCR_LARGE_FLASH_CS2 \ - EBC_BXCR_BAS_ENCODE(0xE7000000) | EBC_BXCR_BS_16MB | \ - EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT - -#define EBC_BXCR_FPGA_CS3 \ - EBC_BXCR_BAS_ENCODE(0xE2000000) | EBC_BXCR_BS_1MB | \ - EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT - -/***************************************************************************** - * UBOOT initiated board specific function calls - ****************************************************************************/ - -int board_early_init_f(void) -{ - int computed_boot_device = BOOT_DEVICE_UNKNOWN; - - /* - * Initialise EBC - */ - early_init_EBC(); - - /* - * Determine which boot device was selected - */ - computed_boot_device = bootdevice_selected(); - - /* - * Reinit EBC based on selected boot device - */ - early_reinit_EBC(computed_boot_device); - - /* - * Setup for UIC on 460SX redwood board - */ - early_init_UIC(); - - return 0; -} - -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - printf("Board: Redwood - AMCC 460SX Reference Board"); - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - return 0; -} - -static void early_init_EBC(void) -{ - /* - * Initialize EBC CONFIG - - * Keep the Default value, but the bit PDT which has to be set to 1 ?TBC - * default value : - * 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000 - */ - mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK | - EBC_CFG_PTD_ENABLE | - EBC_CFG_RTC_16PERCLK | - EBC_CFG_ATC_PREVIOUS | - EBC_CFG_DTC_PREVIOUS | - EBC_CFG_CTC_PREVIOUS | - EBC_CFG_OEO_PREVIOUS | - EBC_CFG_EMC_DEFAULT | EBC_CFG_PME_DISABLE | EBC_CFG_PR_16); - - /* - * PART 1 : Initialize EBC Bank 3 - * ============================== - * Bank1 is always associated to the EPLD. - * It has to be initialized prior to other banks settings computation - * since some board registers values may be needed to determine the - * boot type - */ - mtebc(PB1AP, EBC_BXAP_FPGA); - mtebc(PB1CR, EBC_BXCR_FPGA_CS3); - -} - -static int bootdevice_selected(void) -{ - unsigned long sdr0_pinstp; - unsigned long bootstrap_settings; - int computed_boot_device = BOOT_DEVICE_UNKNOWN; - - /* - * Determine which boot device was selected - * ================================================= - * - * Read Pin Strap Register in PPC460SX - * Result can either be : - * - Boot strap = boot from EBC 8bits => Small Flash - * - Boot strap = boot from PCI - * - Boot strap = IIC - * In case of boot from IIC, read Serial Device Strap Register1 - * - * Result can either be : - * - Boot from EBC - EBC Bus Width = 8bits => Small Flash - * - Boot from EBC - EBC Bus Width = 16bits => Large Flash or SRAM - * - Boot from PCI - */ - - /* Read Pin Strap Register in PPC460SX */ - mfsdr(SDR0_PINSTP, sdr0_pinstp); - bootstrap_settings = sdr0_pinstp & SDR0_PSTRP0_BOOTSTRAP_MASK; - - switch (bootstrap_settings) { - case SDR0_PSTRP0_BOOTSTRAP_SETTINGS0: - /* - * Boot from SRAM, 8bit width - */ - computed_boot_device = BOOT_FROM_8BIT_SRAM; - break; - case SDR0_PSTRP0_BOOTSTRAP_SETTINGS1: - /* - * Boot from SRAM, 32bit width - */ - computed_boot_device = BOOT_FROM_32BIT_SRAM; - break; - case SDR0_PSTRP0_BOOTSTRAP_SETTINGS2: - /* - * Boot from NAND, 8bit width - */ - computed_boot_device = BOOT_FROM_8BIT_NAND; - break; - case SDR0_PSTRP0_BOOTSTRAP_SETTINGS4: - /* - * Boot from SRAM, 16bit width - * Boot setting in IIC EEPROM 0x50 - */ - computed_boot_device = BOOT_FROM_16BIT_SRAM; - break; - case SDR0_PSTRP0_BOOTSTRAP_SETTINGS5: - /* - * Boot from NOR, 16bit width - * Boot setting in IIC EEPROM 0x54 - */ - computed_boot_device = BOOT_FROM_16BIT_NOR; - break; - default: - /* should not be */ - computed_boot_device = BOOT_DEVICE_UNKNOWN; - break; - } - - return computed_boot_device; -} - -static void early_reinit_EBC(int computed_boot_device) -{ - /* - * Compute EBC settings depending on selected boot device - * ====================================================== - * - * Resulting EBC init will be among following configurations : - * - * - Boot from EBC 8bits => boot from Small Flash selected - * EBC-CS0 = Small Flash - * EBC-CS2 = Large Flash and SRAM - * - * - Boot from EBC 16bits => boot from Large Flash or SRAM - * EBC-CS0 = Large Flash or SRAM - * EBC-CS2 = Small Flash - * - * - Boot from PCI - * EBC-CS0 = not initialized to avoid address contention - * EBC-CS2 = same as boot from Small Flash selected - */ - - unsigned long ebc0_cs0_bxap_value = 0, ebc0_cs0_bxcr_value = 0; - unsigned long ebc0_cs1_bxap_value = 0, ebc0_cs1_bxcr_value = 0; - unsigned long ebc0_cs2_bxap_value = 0, ebc0_cs2_bxcr_value = 0; - - switch (computed_boot_device) { - /*-------------------------------------------------------------------*/ - case BOOT_FROM_8BIT_SRAM: - /*-------------------------------------------------------------------*/ - ebc0_cs0_bxap_value = EBC_BXAP_8BIT_SRAM; - ebc0_cs0_bxcr_value = EBC_BXCR_8BIT_SRAM_CS0; - ebc0_cs1_bxap_value = EBC_BXAP_NOR; - ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1; - ebc0_cs2_bxap_value = EBC_BXAP_NAND; - ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2; - break; - - /*-------------------------------------------------------------------*/ - case BOOT_FROM_16BIT_SRAM: - /*-------------------------------------------------------------------*/ - ebc0_cs0_bxap_value = EBC_BXAP_16BIT_SRAM; - ebc0_cs0_bxcr_value = EBC_BXCR_16BIT_SRAM_CS0; - ebc0_cs1_bxap_value = EBC_BXAP_NOR; - ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1; - ebc0_cs2_bxap_value = EBC_BXAP_NAND; - ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2; - break; - - /*-------------------------------------------------------------------*/ - case BOOT_FROM_32BIT_SRAM: - /*-------------------------------------------------------------------*/ - ebc0_cs0_bxap_value = EBC_BXAP_32BIT_SRAM; - ebc0_cs0_bxcr_value = EBC_BXCR_32BIT_SRAM_CS0; - ebc0_cs1_bxap_value = EBC_BXAP_NOR; - ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1; - ebc0_cs2_bxap_value = EBC_BXAP_NAND; - ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2; - break; - - /*-------------------------------------------------------------------*/ - case BOOT_FROM_16BIT_NOR: - /*-------------------------------------------------------------------*/ - ebc0_cs0_bxap_value = EBC_BXAP_NOR; - ebc0_cs0_bxcr_value = EBC_BXCR_NOR_CS0; - ebc0_cs1_bxap_value = EBC_BXAP_NAND; - ebc0_cs1_bxcr_value = EBC_BXCR_NAND_CS1; - ebc0_cs2_bxap_value = EBC_BXAP_32BIT_SRAM; - ebc0_cs2_bxcr_value = EBC_BXCR_SRAM_CS2; - break; - - /*-------------------------------------------------------------------*/ - case BOOT_FROM_8BIT_NAND: - /*-------------------------------------------------------------------*/ - ebc0_cs0_bxap_value = EBC_BXAP_NAND; - ebc0_cs0_bxcr_value = EBC_BXCR_NAND_CS0; - ebc0_cs1_bxap_value = EBC_BXAP_NOR; - ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1; - ebc0_cs2_bxap_value = EBC_BXAP_32BIT_SRAM; - ebc0_cs2_bxcr_value = EBC_BXCR_SRAM_CS2; - break; - - /*-------------------------------------------------------------------*/ - default: - /*-------------------------------------------------------------------*/ - /* BOOT_DEVICE_UNKNOWN */ - break; - } - - mtebc(PB0AP, ebc0_cs0_bxap_value); - mtebc(PB0CR, ebc0_cs0_bxcr_value); - mtebc(PB1AP, ebc0_cs1_bxap_value); - mtebc(PB1CR, ebc0_cs1_bxcr_value); - mtebc(PB2AP, ebc0_cs2_bxap_value); - mtebc(PB2CR, ebc0_cs2_bxcr_value); -} - -static void early_init_UIC(void) -{ - /* - * Initialise UIC registers. Clear all interrupts. Disable all - * interrupts. - * Set critical interrupt values. Set interrupt polarities. Set - * interrupt trigger levels. Make bit 0 High priority. Clear all - * interrupts again. - */ - mtdcr(UIC3SR, 0xffffffff); /* Clear all interrupts */ - mtdcr(UIC3ER, 0x00000000); /* disable all interrupts */ - mtdcr(UIC3CR, 0x00000000); /* Set Critical / Non Critical - * interrupts */ - mtdcr(UIC3PR, 0xffffffff); /* Set Interrupt Polarities */ - mtdcr(UIC3TR, 0x001fffff); /* Set Interrupt Trigger Levels */ - mtdcr(UIC3VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC3SR, 0xffffffff); /* clear all interrupts */ - - mtdcr(UIC2SR, 0xffffffff); /* Clear all interrupts */ - mtdcr(UIC2ER, 0x00000000); /* disable all interrupts */ - mtdcr(UIC2CR, 0x00000000); /* Set Critical / Non Critical - * interrupts */ - mtdcr(UIC2PR, 0xebebebff); /* Set Interrupt Polarities */ - mtdcr(UIC2TR, 0x74747400); /* Set Interrupt Trigger Levels */ - mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC2SR, 0xffffffff); /* clear all interrupts */ - - mtdcr(UIC1SR, 0xffffffff); /* Clear all interrupts */ - mtdcr(UIC1ER, 0x00000000); /* disable all interrupts */ - mtdcr(UIC1CR, 0x00000000); /* Set Critical / Non Critical - * interrupts */ - mtdcr(UIC1PR, 0xffffffff); /* Set Interrupt Polarities */ - mtdcr(UIC1TR, 0x001fc0ff); /* Set Interrupt Trigger Levels */ - mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC1SR, 0xffffffff); /* clear all interrupts */ - - mtdcr(UIC0SR, 0xffffffff); /* Clear all interrupts */ - mtdcr(UIC0ER, 0x00000000); /* disable all interrupts excepted - * cascade to be checked */ - mtdcr(UIC0CR, 0x00104001); /* Set Critical / Non Critical - * interrupts */ - mtdcr(UIC0PR, 0xffffffff); /* Set Interrupt Polarities */ - mtdcr(UIC0TR, 0x000f003c); /* Set Interrupt Trigger Levels */ - mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC0SR, 0xffffffff); /* clear all interrupts */ - -} diff --git a/board/amcc/redwood/redwood.h b/board/amcc/redwood/redwood.h deleted file mode 100644 index 9c36073..0000000 --- a/board/amcc/redwood/redwood.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * (C) Copyright 2008 - * Feng Kan, Applied Micro Circuit Corp., fkan(a)amcc.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __REDWOOD_H_ -#define __REDWOOD_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -/*----------------------------------------------------------------------------+ -| Defines -+----------------------------------------------------------------------------*/ -/* Pin Straps Reg */ -#define SDR0_PSTRP0 0x0040 -#define SDR0_PSTRP0_BOOTSTRAP_MASK 0xE0000000 /* Strap Bits */ - -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS0 0x00000000 /* Default strap settings 0 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS1 0x20000000 /* Default strap settings 1 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS2 0x40000000 /* Default strap settings 2 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS3 0x60000000 /* Default strap settings 3 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS4 0x80000000 /* Default strap settings 4 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS5 0xA0000000 /* Default strap settings 5 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS6 0xC0000000 /* Default strap settings 6 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS7 0xE0000000 /* Default strap settings 7 */ - -#ifdef __cplusplus -} -#endif -#endif /* __REDWOOD_H_ */ diff --git a/board/amcc/sequoia/Kconfig b/board/amcc/sequoia/Kconfig deleted file mode 100644 index 67ee3ca..0000000 --- a/board/amcc/sequoia/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_SEQUOIA - -config SYS_BOARD - default "sequoia" - -config SYS_VENDOR - default "amcc" - -config SYS_CONFIG_NAME - default "sequoia" - -endif diff --git a/board/amcc/sequoia/MAINTAINERS b/board/amcc/sequoia/MAINTAINERS deleted file mode 100644 index 6c28a37..0000000 --- a/board/amcc/sequoia/MAINTAINERS +++ /dev/null @@ -1,9 +0,0 @@ -SEQUOIA BOARD -M: Stefan Roese <sr(a)denx.de> -S: Maintained -F: board/amcc/sequoia/ -F: include/configs/sequoia.h -F: configs/rainier_defconfig -F: configs/rainier_ramboot_defconfig -F: configs/sequoia_defconfig -F: configs/sequoia_ramboot_defconfig diff --git a/board/amcc/sequoia/Makefile b/board/amcc/sequoia/Makefile deleted file mode 100644 index b4ab5da..0000000 --- a/board/amcc/sequoia/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2002-2006 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = sequoia.o sdram.o -obj-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o -extra-y += init.o diff --git a/board/amcc/sequoia/chip_config.c b/board/amcc/sequoia/chip_config.c deleted file mode 100644 index eef9316..0000000 --- a/board/amcc/sequoia/chip_config.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * (C) Copyright 2009 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/ppc4xx_config.h> - -struct ppc4xx_config ppc4xx_config_val[] = { - { - "333-133-nor", "NOR CPU: 333 PLB: 133 OPB: 66 EBC: 66", - { - 0x84, 0x70, 0xa2, 0xa6, 0x05, 0x57, 0xa0, 0x10, - 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 - } - }, - { - "333-166-nor", "NOR CPU: 333 PLB: 166 OPB: 83 EBC: 55", - { - 0xc7, 0x78, 0xf3, 0x4e, 0x05, 0xd7, 0xa0, 0x30, - 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 - } - }, - { - "333-166-nand", "NAND CPU: 333 PLB: 166 OPB: 83 EBC: 55", - { - 0xc7, 0x78, 0xf3, 0x4e, 0x05, 0xd7, 0xd0, 0x30, - 0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 - } - }, - { - "400-133-nor", "NOR CPU: 400 PLB: 133 OPB: 66 EBC: 66", - { - 0x86, 0x78, 0xc2, 0xc6, 0x05, 0x57, 0xa0, 0x30, - 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 - } - }, - { - "400-160-nor", "NOR CPU: 400 PLB: 160 OPB: 80 EBC: 53", - { - 0x86, 0x78, 0xc2, 0xa6, 0x05, 0xd7, 0xa0, 0x10, - 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 - } - }, - { - "416-166-nor", "NOR CPU: 416 PLB: 166 OPB: 83 EBC: 55", - { - 0xc6, 0x78, 0x52, 0xa6, 0x05, 0xd7, 0xa0, 0x10, - 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 - } - }, - { - "416-166-nand", "NAND CPU: 416 PLB: 166 OPB: 83 EBC: 55", - { - 0xc6, 0x78, 0x52, 0xa6, 0x05, 0xd7, 0xd0, 0x10, - 0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 - } - }, - { - "500-166-nor", "NOR CPU: 500 PLB: 166 OPB: 83 EBC: 55", - { - 0xc7, 0x78, 0x52, 0xc6, 0x05, 0xd7, 0xa0, 0x30, - 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 - } - }, - { - "500-166-nand", "NAND CPU: 500 PLB: 166 OPB: 83 EBC: 55", - { - 0xc7, 0x78, 0x52, 0xc6, 0x05, 0xd7, 0xd0, 0x30, - 0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 - } - }, - { - "533-133-nor", "NOR CPU: 533 PLB: 133 OPB: 66 EBC: 66", - { - 0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xa0, 0x30, - 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 - } - }, - { - "667-133-nor", "NOR CPU: 667 PLB: 133 OPB: 66 EBC: 66", - { - 0x87, 0x78, 0xa2, 0x56, 0x09, 0x57, 0xa0, 0x30, - 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 - } - }, - { - "667-166-nor", "NOR CPU: 667 PLB: 166 OPB: 83 EBC: 55", - { - 0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xa0, 0x30, - 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 - } - }, - { - "667-166-nand", "NAND CPU: 667 PLB: 166 OPB: 83 EBC: 55", - { - 0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xd0, 0x30, - 0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 - } - }, -}; - -int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val); diff --git a/board/amcc/sequoia/config.mk b/board/amcc/sequoia/config.mk deleted file mode 100644 index 824e78f..0000000 --- a/board/amcc/sequoia/config.mk +++ /dev/null @@ -1,19 +0,0 @@ -# -# (C) Copyright 2002-2010 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# -# -# AMCC 440EPx Reference Platform (Sequoia) board -# - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S deleted file mode 100644 index f876639..0000000 --- a/board/amcc/sequoia/init.S +++ /dev/null @@ -1,79 +0,0 @@ -/* - * (C) Copyright 2008 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm-offsets.h> -#include <ppc_asm.tmpl> -#include <asm/mmu.h> -#include <config.h> - -/* - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - */ - .section .bootpg,"ax" - .globl tlbtab - -tlbtab: - tlbtab_start - - /* vxWorks needs this as first entry for the Machine Check interrupt */ - tlbentry( 0x40000000, SZ_256M, 0, 0, AC_RWX | SA_IG ) - - /* - * The RAM-boot version skips the SDRAM TLB (identified by EPN=0). This - * entry is already configured for SDRAM via the JTAG debugger and mustn't - * be re-initialized by this RAM-booting U-Boot version. - */ -#ifndef CONFIG_SYS_RAMBOOT - /* TLB-entry for DDR SDRAM (Up to 2GB) */ -#ifdef CONFIG_4xx_DCACHE - tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_G) -#else - tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_IG ) -#endif -#endif /* CONFIG_SYS_RAMBOOT */ - - /* TLB-entry for EBC */ - tlbentry( CONFIG_SYS_BCSR_BASE, SZ_256M, CONFIG_SYS_BCSR_BASE, 1, AC_RWX | SA_IG ) - - /* BOOT_CS (FLASH) must be forth. Before relocation SA_I can be off to use the - * speed up boot process. It is patched after relocation to enable SA_I - */ - tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_RWX | SA_G ) - -#ifdef CONFIG_SYS_INIT_RAM_DCACHE - /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G ) -#endif - - /* TLB-entry for PCI Memory */ - tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 1, AC_RW | SA_IG ) - tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_RW | SA_IG ) - tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_RW | SA_IG ) - tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_RW | SA_IG ) - - /* TLB-entry for NAND */ - tlbentry( CONFIG_SYS_NAND_ADDR, SZ_1K, CONFIG_SYS_NAND_ADDR, 1, AC_RWX | SA_IG ) - - /* TLB-entry for Internal Registers & OCM */ - tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0, AC_RWX | SA_I ) - - /*TLB-entry PCI registers*/ - tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_RWX | SA_IG ) - - /* TLB-entry for peripherals */ - tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_RWX | SA_IG) - - /* TLB-entry PCI IO Space - from sr(a)denx.de */ - tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_RWX | SA_IG) - - tlbtab_end diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c deleted file mode 100644 index 67640d7..0000000 --- a/board/amcc/sequoia/sdram.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * (C) Copyright 2006 - * Sylvie Gohl, AMCC/IBM, gohl.sylvie(a)fr.ibm.com - * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol(a)fr.ibm.com - * Thierry Roman, AMCC/IBM, thierry_roman(a)fr.ibm.com - * Alain Saurel, AMCC/IBM, alain.saurel(a)fr.ibm.com - * Robert Snyder, AMCC/IBM, rob.snyder(a)fr.ibm.com - * - * (C) Copyright 2006-2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* define DEBUG for debug output */ -#undef DEBUG - -#include <common.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/ppc440.h> - -/*-----------------------------------------------------------------------------+ - * Prototypes - *-----------------------------------------------------------------------------*/ -extern int denali_wait_for_dlllock(void); -extern void denali_core_search_data_eye(void); - -/************************************************************************* - * - * initdram -- 440EPx's DDR controller is a DENALI Core - * - ************************************************************************/ -phys_size_t initdram (int board_type) -{ -#if !defined(CONFIG_SYS_RAMBOOT) - ulong speed = get_bus_freq(0); - - mtsdram(DDR0_02, 0x00000000); - - mtsdram(DDR0_00, 0x0000190A); - mtsdram(DDR0_01, 0x01000000); - mtsdram(DDR0_03, 0x02030602); - mtsdram(DDR0_04, 0x0A020200); - mtsdram(DDR0_05, 0x02020308); - mtsdram(DDR0_06, 0x0102C812); - mtsdram(DDR0_07, 0x000D0100); - mtsdram(DDR0_08, 0x02430001); - mtsdram(DDR0_09, 0x00011D5F); - mtsdram(DDR0_10, 0x00000100); - mtsdram(DDR0_11, 0x0027C800); - mtsdram(DDR0_12, 0x00000003); - mtsdram(DDR0_14, 0x00000000); - mtsdram(DDR0_17, 0x19000000); - mtsdram(DDR0_18, 0x19191919); - mtsdram(DDR0_19, 0x19191919); - mtsdram(DDR0_20, 0x0B0B0B0B); - mtsdram(DDR0_21, 0x0B0B0B0B); - mtsdram(DDR0_22, 0x00267F0B); - mtsdram(DDR0_23, 0x00000000); - mtsdram(DDR0_24, 0x01010002); - if (speed > 133333334) - mtsdram(DDR0_26, 0x5B26050C); - else - mtsdram(DDR0_26, 0x5B260408); - mtsdram(DDR0_27, 0x0000682B); - mtsdram(DDR0_28, 0x00000000); - mtsdram(DDR0_31, 0x00000000); - mtsdram(DDR0_42, 0x01000006); - mtsdram(DDR0_43, 0x030A0200); - mtsdram(DDR0_44, 0x00000003); - mtsdram(DDR0_02, 0x00000001); - - denali_wait_for_dlllock(); -#endif /* #ifndef CONFIG_SYS_RAMBOOT */ - -#ifdef CONFIG_DDR_DATA_EYE - /* -----------------------------------------------------------+ - * Perform data eye search if requested. - * ----------------------------------------------------------*/ - denali_core_search_data_eye(); -#endif - - /* - * Clear possible errors resulting from data-eye-search. - * If not done, then we could get an interrupt later on when - * exceptions are enabled. - */ - set_mcsr(get_mcsr()); - - return (CONFIG_SYS_MBYTES_SDRAM << 20); -} diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c deleted file mode 100644 index 91c6cbf..0000000 --- a/board/amcc/sequoia/sequoia.c +++ /dev/null @@ -1,413 +0,0 @@ -/* - * (C) Copyright 2006-2009 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * (C) Copyright 2006 - * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol(a)fr.ibm.com - * Alain Saurel, AMCC/IBM, alain.saurel(a)fr.ibm.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <errno.h> -#include <libfdt.h> -#include <fdt_support.h> -#include <asm/ppc4xx.h> -#include <asm/ppc4xx-gpio.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/bitops.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if !defined(CONFIG_SYS_NO_FLASH) -extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ -#endif - -extern void __ft_board_setup(void *blob, bd_t *bd); -ulong flash_get_size(ulong base, int banknum); - -static inline u32 get_async_pci_freq(void) -{ - if (in_8((void *)(CONFIG_SYS_BCSR_BASE + 5)) & - CONFIG_SYS_BCSR5_PCI66EN) - return 66666666; - else - return 33333333; -} - -int board_early_init_f(void) -{ - u32 sdr0_cust0; - u32 sdr0_pfc1, sdr0_pfc2; - u32 reg; - - mtdcr(EBC0_CFGADDR, EBC0_CFG); - mtdcr(EBC0_CFGDATA, 0xb8400000); - - /* - * Setup the interrupt controller polarities, triggers, etc. - */ - mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(UIC0ER, 0x00000000); /* disable all */ - mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */ - mtdcr(UIC0PR, 0xfffff7ff); /* per ref-board manual */ - mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */ - mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC0SR, 0xffffffff); /* clear all */ - - mtdcr(UIC1SR, 0xffffffff); /* clear all */ - mtdcr(UIC1ER, 0x00000000); /* disable all */ - mtdcr(UIC1CR, 0x00000000); /* all non-critical */ - mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */ - mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */ - mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC1SR, 0xffffffff); /* clear all */ - - mtdcr(UIC2SR, 0xffffffff); /* clear all */ - mtdcr(UIC2ER, 0x00000000); /* disable all */ - mtdcr(UIC2CR, 0x00000000); /* all non-critical */ - mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */ - mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */ - mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC2SR, 0xffffffff); /* clear all */ - - /* Check and reconfigure the PCI sync clock if necessary */ - ppc4xx_pci_sync_clock_config(get_async_pci_freq()); - - /* 50MHz tmrclk */ - out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x04, 0x00); - - /* clear write protects */ - out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x07, 0x00); - - /* enable Ethernet */ - out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x08, 0x00); - - /* enable USB device */ - out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x09, 0x20); - - /* select Ethernet (and optionally IIC1) pins */ - mfsdr(SDR0_PFC1, sdr0_pfc1); - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | - SDR0_PFC1_SELECT_CONFIG_4; -#ifdef CONFIG_I2C_MULTI_BUS - sdr0_pfc1 |= ((sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL); -#endif - /* Two UARTs, so we need 4-pin mode. Also, we want CTS/RTS mode. */ - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0IM_MASK) | SDR0_PFC1_U0IM_4PINS; - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) | SDR0_PFC1_U0ME_CTS_RTS; - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U1ME_MASK) | SDR0_PFC1_U1ME_CTS_RTS; - - mfsdr(SDR0_PFC2, sdr0_pfc2); - sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | - SDR0_PFC2_SELECT_CONFIG_4; - mtsdr(SDR0_PFC2, sdr0_pfc2); - mtsdr(SDR0_PFC1, sdr0_pfc1); - - /* PCI arbiter enabled */ - mfsdr(SDR0_PCI0, reg); - mtsdr(SDR0_PCI0, 0x80000000 | reg); - - /* setup NAND FLASH */ - mfsdr(SDR0_CUST0, sdr0_cust0); - sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL | - SDR0_CUST0_NDFC_ENABLE | - SDR0_CUST0_NDFC_BW_8_BIT | - SDR0_CUST0_NDFC_ARE_MASK | - (0x80000000 >> (28 + CONFIG_SYS_NAND_CS)); - mtsdr(SDR0_CUST0, sdr0_cust0); - - return 0; -} - -int misc_init_r(void) -{ -#if !defined(CONFIG_SYS_NO_FLASH) - uint pbcr; - int size_val = 0; -#endif -#ifdef CONFIG_440EPX - unsigned long usb2d0cr = 0; - unsigned long usb2phy0cr, usb2h0cr = 0; - unsigned long sdr0_pfc1; - char *act = getenv("usbact"); -#endif - u32 reg; - -#if !defined(CONFIG_SYS_NO_FLASH) - /* Re-do flash sizing to get full correct info */ - - /* adjust flash start and offset */ - gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; - gd->bd->bi_flashoffset = 0; - -#if defined(CONFIG_SYS_RAMBOOT) - mtdcr(EBC0_CFGADDR, PB3CR); -#else - mtdcr(EBC0_CFGADDR, PB0CR); -#endif - pbcr = mfdcr(EBC0_CFGDATA); - size_val = ffs(gd->bd->bi_flashsize) - 21; - pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); -#if defined(CONFIG_SYS_RAMBOOT) - mtdcr(EBC0_CFGADDR, PB3CR); -#else - mtdcr(EBC0_CFGADDR, PB0CR); -#endif - mtdcr(EBC0_CFGDATA, pbcr); - - /* - * Re-check to get correct base address - */ - flash_get_size(gd->bd->bi_flashstart, 0); - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - -CONFIG_SYS_MONITOR_LEN, - 0xffffffff, - &flash_info[0]); - - /* Env protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); -#endif -#endif /* CONFIG_SYS_NO_FLASH */ - - /* - * USB suff... - */ -#ifdef CONFIG_440EPX - if (act == NULL || strcmp(act, "hostdev") == 0) { - /* SDR Setting */ - mfsdr(SDR0_PFC1, sdr0_pfc1); - mfsdr(SDR0_USB2D0CR, usb2d0cr); - mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); - mfsdr(SDR0_USB2H0CR, usb2h0cr); - - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; - - /* - * An 8-bit/60MHz interface is the only possible alternative - * when connecting the Device to the PHY - */ - usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK; - usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; - - /* - * To enable the USB 2.0 Device function - * through the UTMI interface - */ - usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK; - usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION; - - sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK; - sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL; - - mtsdr(SDR0_PFC1, sdr0_pfc1); - mtsdr(SDR0_USB2D0CR, usb2d0cr); - mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); - mtsdr(SDR0_USB2H0CR, usb2h0cr); - - /*clear resets*/ - udelay (1000); - mtsdr(SDR0_SRST1, 0x00000000); - udelay (1000); - mtsdr(SDR0_SRST0, 0x00000000); - - printf("USB: Host(int phy) Device(ext phy)\n"); - - } else if (strcmp(act, "dev") == 0) { - /*-------------------PATCH-------------------------------*/ - mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); - - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; - mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); - - udelay (1000); - mtsdr(SDR0_SRST1, 0x672c6000); - - udelay (1000); - mtsdr(SDR0_SRST0, 0x00000080); - - udelay (1000); - mtsdr(SDR0_SRST1, 0x60206000); - - *(unsigned int *)(0xe0000350) = 0x00000001; - - udelay (1000); - mtsdr(SDR0_SRST1, 0x60306000); - /*-------------------PATCH-------------------------------*/ - - /* SDR Setting */ - mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); - mfsdr(SDR0_USB2H0CR, usb2h0cr); - mfsdr(SDR0_USB2D0CR, usb2d0cr); - mfsdr(SDR0_PFC1, sdr0_pfc1); - - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; - - usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK; - usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; - - usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK; - usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION; - - sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK; - sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; - - mtsdr(SDR0_USB2H0CR, usb2h0cr); - mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); - mtsdr(SDR0_USB2D0CR, usb2d0cr); - mtsdr(SDR0_PFC1, sdr0_pfc1); - - /* clear resets */ - udelay (1000); - mtsdr(SDR0_SRST1, 0x00000000); - udelay (1000); - mtsdr(SDR0_SRST0, 0x00000000); - - printf("USB: Device(int phy)\n"); - } -#endif /* CONFIG_440EPX */ - - mfsdr(SDR0_SRST1, reg); /* enable security/kasumi engines */ - reg &= ~(SDR0_SRST1_CRYP0 | SDR0_SRST1_KASU0); - mtsdr(SDR0_SRST1, reg); - - /* - * Clear PLB4A0_ACR[WRP] - * This fix will make the MAL burst disabling patch for the Linux - * EMAC driver obsolete. - */ - reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK; - mtdcr(PLB4A0_ACR, reg); - - return 0; -} - -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - u8 rev; - u32 clock = get_async_pci_freq(); - -#ifdef CONFIG_440EPX - printf("Board: Sequoia - AMCC PPC440EPx Evaluation Board"); -#else - printf("Board: Rainier - AMCC PPC440GRx Evaluation Board"); -#endif - - rev = in_8((void *)(CONFIG_SYS_BCSR_BASE + 0)); - printf(", Rev. %X, PCI-Async=%d MHz", rev, clock / 1000000); - - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - /* - * Reconfiguration of the PCI sync clock is already done, - * now check again if everything is in range: - */ - if (ppc4xx_pci_sync_clock_config(clock)) { - printf("ERROR: PCI clocking incorrect (async=%d " - "sync=%ld)!\n", clock, get_PCI_freq()); - } - - return (0); -} - -#if defined(CONFIG_PCI) && defined(CONFIG_PCI_PNP) -/* - * Assign interrupts to PCI devices. - */ -void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) -{ - pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIRQ2); -} -#endif - -#if defined(CONFIG_SYS_RAMBOOT) -/* - * On NAND-booting sequoia, we need to patch the chips select numbers - * in the dtb (CS0 - NAND, CS3 - NOR) - */ -int ft_board_setup(void *blob, bd_t *bd) -{ - int rc; - int len; - int nodeoffset; - struct fdt_property *prop; - u32 *reg; - char path[32]; - - /* First do common fdt setup */ - __ft_board_setup(blob, bd); - - /* And now configure NOR chip select to 3 instead of 0 */ - strcpy(path, "/plb/opb/ebc/nor_flash@0,0"); - nodeoffset = fdt_path_offset(blob, path); - prop = fdt_get_property_w(blob, nodeoffset, "reg", &len); - if (prop == NULL) { - printf("Unable to update NOR chip select for NAND booting\n"); - return -FDT_ERR_NOTFOUND; - } - reg = (u32 *)&prop->data[0]; - reg[0] = 3; - rc = fdt_find_and_setprop(blob, path, "reg", reg, 3 * sizeof(u32), 1); - if (rc) { - printf("Unable to update property NOR mappings\n"); - return rc; - } - - /* And now configure NAND chip select to 0 instead of 3 */ - strcpy(path, "/plb/opb/ebc/ndfc@3,0"); - nodeoffset = fdt_path_offset(blob, path); - prop = fdt_get_property_w(blob, nodeoffset, "reg", &len); - if (prop == NULL) { - printf("Unable to update NDFC chip select for NAND booting\n"); - return len; - } - reg = (u32 *)&prop->data[0]; - reg[0] = 0; - rc = fdt_find_and_setprop(blob, path, "reg", reg, 3 * sizeof(u32), 1); - if (rc) { - printf("Unable to update property NDFC mapping\n"); - return rc; - } - - return 0; -} -#endif /* CONFIG_SYS_RAMBOOT */ diff --git a/board/amcc/sequoia/u-boot-ram.lds b/board/amcc/sequoia/u-boot-ram.lds deleted file mode 100644 index ef08be8..0000000 --- a/board/amcc/sequoia/u-boot-ram.lds +++ /dev/null @@ -1,79 +0,0 @@ -/* - * (C) Copyright 2009 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/ppc4xx/start.o (.text*) - board/amcc/sequoia/init.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - KEEP(*(.got)) - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/taihu/Kconfig b/board/amcc/taihu/Kconfig deleted file mode 100644 index fc5cb1d..0000000 --- a/board/amcc/taihu/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_TAIHU - -config SYS_BOARD - default "taihu" - -config SYS_VENDOR - default "amcc" - -config SYS_CONFIG_NAME - default "taihu" - -endif diff --git a/board/amcc/taihu/MAINTAINERS b/board/amcc/taihu/MAINTAINERS deleted file mode 100644 index 2efc254..0000000 --- a/board/amcc/taihu/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -TAIHU BOARD -M: John Otken <jotken(a)softadvances.com> -S: Maintained -F: board/amcc/taihu/ -F: include/configs/taihu.h -F: configs/taihu_defconfig diff --git a/board/amcc/taihu/Makefile b/board/amcc/taihu/Makefile deleted file mode 100644 index 65606fe..0000000 --- a/board/amcc/taihu/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = taihu.o flash.o lcd.o update.o diff --git a/board/amcc/taihu/flash.c b/board/amcc/taihu/flash.c deleted file mode 100644 index 0780488..0000000 --- a/board/amcc/taihu/flash.c +++ /dev/null @@ -1,1063 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Modified 4/5/2001 - * Wait for completion of each sector erase command issued - * 4/5/2001 - * Chris Hallinan - DS4.COM, Inc. - clh(a)net1plus.com - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/processor.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -#undef DEBUG -#ifdef DEBUG -#define DEBUGF(x...) printf(x) -#else -#define DEBUGF(x...) -#endif /* DEBUG */ - -#define CONFIG_SYS_FLASH_CHAR_SIZE unsigned char -#define CONFIG_SYS_FLASH_CHAR_ADDR0 (0x0aaa) -#define CONFIG_SYS_FLASH_CHAR_ADDR1 (0x0555) -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(vu_long * addr, flash_info_t * info); -static void flash_get_offsets(ulong base, flash_info_t * info); -static int write_word(flash_info_t * info, ulong dest, ulong data); -#ifdef FLASH_BASE1_PRELIM -static int write_word_1(flash_info_t * info, ulong dest, ulong data); -static int write_word_2(flash_info_t * info, ulong dest, ulong data); -static int flash_erase_1(flash_info_t * info, int s_first, int s_last); -static int flash_erase_2(flash_info_t * info, int s_first, int s_last); -static ulong flash_get_size_1(vu_long * addr, flash_info_t * info); -static ulong flash_get_size_2(vu_long * addr, flash_info_t * info); -#endif - -unsigned long flash_init(void) -{ - unsigned long size_b0, size_b1=0; - int i; - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - - size_b0 = - flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0 << 20); - } - - if (size_b0) { - /* Setup offsets */ - flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]); - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1, - &flash_info[0]); -#ifdef CONFIG_ENV_IS_IN_FLASH - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); -#endif - /* Also protect sector containing initial power-up instruction */ - /* (flash_protect() checks address range - other call ignored) */ - (void)flash_protect(FLAG_PROTECT_SET, - 0xFFFFFFFC, 0xFFFFFFFF, &flash_info[0]); - - flash_info[0].size = size_b0; - } -#ifdef FLASH_BASE1_PRELIM - size_b1 = - flash_get_size((vu_long *) FLASH_BASE1_PRELIM, &flash_info[1])*2; - - if (flash_info[1].flash_id == FLASH_UNKNOWN) { - printf("## Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n", - size_b1, size_b1 << 20); - } - - if (size_b1) { - /* Setup offsets */ - flash_get_offsets(FLASH_BASE1_PRELIM, &flash_info[1]); - flash_info[1].size = size_b1; - } -#endif - return (size_b0 + size_b1); -} - -static void flash_get_offsets(ulong base, flash_info_t * info) -{ - int i; - - /* set up sector start address table */ - if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || - (info->flash_id == FLASH_AM040)) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000); - } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMLV128U) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000*2); - } - } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_S29GL128N ) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000*2); - } - } else { - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = - base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - } -} - - -void flash_print_info(flash_info_t * info) -{ - int i; - int k; - int size; - int erased; - volatile unsigned long *flash; - - if (info->flash_id == FLASH_UNKNOWN) { - printf("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - printf("AMD "); - break; - case FLASH_MAN_STM: - printf("STM "); - break; - case FLASH_MAN_FUJ: - printf("FUJITSU "); - break; - case FLASH_MAN_SST: - printf("SST "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: - printf("AM29F040 (512 Kbit, uniform sector size)\n"); - break; - case FLASH_AM400B: - printf("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: - printf("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: - printf("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: - printf("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AMD016: - printf("AM29F016D (16 Mbit, uniform sector size)\n"); - break; - case FLASH_AM160B: - printf("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: - printf("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: - printf("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: - printf("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - case FLASH_AM033C: - printf("AM29LV033C (32 Mbit, top boot sector)\n"); - break; - case FLASH_AMLV128U: - printf("AM29LV128U (128 Mbit * 2, top boot sector)\n"); - break; - case FLASH_SST800A: - printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n"); - break; - case FLASH_SST160A: - printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n"); - break; - case FLASH_STMW320DT: - printf ("M29W320DT (32 M, top sector)\n"); - break; - case FLASH_S29GL128N: - printf ("S29GL128N (256 Mbit, uniform sector size)\n"); - break; - default: - printf("Unknown Chip Type\n"); - break; - } - - printf(" Size: %ld KB in %d Sectors\n", - info->size >> 10, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - /* - * Check if whole sector is erased - */ - if (i != (info->sector_count - 1)) - size = info->start[i + 1] - info->start[i]; - else - size = info->start[0] + info->size - info->start[i]; - erased = 1; - flash = (volatile unsigned long *)info->start[i]; - size = size >> 2; /* divide by 4 for longword access */ - for (k = 0; k < size; k++) { - if (*flash++ != 0xffffffff) { - erased = 0; - break; - } - } - - if ((i % 5) == 0) - printf("\n "); - printf(" %08lX%s%s", - info->start[i], - erased ? " E" : " ", info->protect[i] ? "RO " : " "); - } - printf("\n"); - return; -} - - -/* - * The following code cannot be run from FLASH! - */ -#ifdef FLASH_BASE1_PRELIM -static ulong flash_get_size(vu_long * addr, flash_info_t * info) -{ - if ((ulong)addr == FLASH_BASE1_PRELIM) { - return flash_get_size_2(addr, info); - } else { - return flash_get_size_1(addr, info); - } -} - -static ulong flash_get_size_1(vu_long * addr, flash_info_t * info) -#else -static ulong flash_get_size(vu_long * addr, flash_info_t * info) -#endif -{ - short i; - CONFIG_SYS_FLASH_WORD_SIZE value; - ulong base = (ulong) addr; - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr; - - DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr); - - /* Write auto select command: read Manufacturer ID */ - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090; - udelay(1000); - - value = addr2[0]; - DEBUGF("FLASH MANUFACT: %x\n", value); - - switch (value) { - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - case (CONFIG_SYS_FLASH_WORD_SIZE) SST_MANUFACT: - info->flash_id = FLASH_MAN_SST; - break; - case (CONFIG_SYS_FLASH_WORD_SIZE) STM_MANUFACT: - info->flash_id = FLASH_MAN_STM; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return 0; /* no or unknown flash */ - } - - value = addr2[1]; /* device ID */ - DEBUGF("\nFLASH DEVICEID: %x\n", value); - - switch (value) { - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ - break; - - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ - break; - - case (CONFIG_SYS_FLASH_WORD_SIZE) STM_ID_M29W040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ - break; - - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F016D: - info->flash_id += FLASH_AMD016; - info->sector_count = 32; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV033C: - info->flash_id += FLASH_AMDLV033C; - info->sector_count = 64; - info->size = 0x00400000; - break; /* => 4 MB */ - - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400T: - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 0.5 MB */ - - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400B: - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 0.5 MB */ - - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - default: - info->flash_id = FLASH_UNKNOWN; - return 0; /* => no or unknown flash */ - } - - /* set up sector start address table */ - if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000); - } - else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMLV128U) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000 * 2); - } else { - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = - base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]); - - /* For AMD29033C flash we need to resend the command of * - * reading flash protection for upper 8 Mb of flash */ - if (i == 32) { - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA; - addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555; - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) - info->protect[i] = 0; - else - info->protect[i] = addr2[2] & 1; - } - - /* issue bank reset to return to read mode */ - addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0; - - return info->size; -} - -static int wait_for_DQ7_1(flash_info_t * info, int sect) -{ - ulong start, now, last; - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = - (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]); - - start = get_timer(0); - last = start; - while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) != - (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - return -1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc('.'); - last = now; - } - } - return 0; -} - -#ifdef FLASH_BASE1_PRELIM -int flash_erase(flash_info_t * info, int s_first, int s_last) -{ - if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMLV128U) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_S29GL128N) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT)) { - return flash_erase_2(info, s_first, s_last); - } else { - return flash_erase_1(info, s_first, s_last); - } -} - -static int flash_erase_1(flash_info_t * info, int s_first, int s_last) -#else -int flash_erase(flash_info_t * info, int s_first, int s_last) -#endif -{ - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]); - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2; - int flag, prot, sect; - int i; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf("- missing\n"); - } else { - printf("- no sectors to erase\n"); - } - return 1; - } - - if (info->flash_id == FLASH_UNKNOWN) { - printf("Can't erase unknown flash type - aborted\n"); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf("\n"); - } - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]); - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080; - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00500050; /* block erase */ - for (i = 0; i < 50; i++) - udelay(1000); /* wait 1 ms */ - } else { - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080; - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030; /* sector erase */ - } - /* - * Wait for each sector to complete, it's more - * reliable. According to AMD Spec, you must - * issue all erase commands within a specified - * timeout. This has been seen to fail, especially - * if printf()s are included (for debug)!! - */ - wait_for_DQ7_1(info, sect); - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay(1000); - - /* reset to read mode */ - addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0]; - addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ - - printf(" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < 4 && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < 4; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return rc; - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i = 0; i < 4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return rc; - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return 0; - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < 4; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -#ifdef FLASH_BASE1_PRELIM -static int write_word(flash_info_t * info, ulong dest, ulong data) -{ - if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMLV128U) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_S29GL128N) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT)) { - return write_word_2(info, dest, data); - } else { - return write_word_1(info, dest, data); - } -} - -static int write_word_1(flash_info_t * info, ulong dest, ulong data) -#else -static int write_word(flash_info_t * info, ulong dest, ulong data) -#endif -{ - ulong *data_ptr = &data; - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[0]); - volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *)dest; - volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *)data_ptr; - ulong start; - int i; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return 2; - } - - for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) { - int flag; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0; - - dest2[i] = data2[i]; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer(0); - while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) != - (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) { - - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return 1; - } - } - } - - return 0; -} - -#ifdef FLASH_BASE1_PRELIM - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size_2(vu_long * addr, flash_info_t * info) -{ - short i; - CONFIG_SYS_FLASH_CHAR_SIZE value; - ulong base = (ulong) addr; - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr; - - DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr); - - /* Write auto select command: read Manufacturer ID */ - addr2[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA; - addr2[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555; - addr2[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090; - udelay(1000); - - value = (CONFIG_SYS_FLASH_CHAR_SIZE)addr2[0]; - DEBUGF("FLASH MANUFACT: %x\n", value); - - switch (value) { - case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case (CONFIG_SYS_FLASH_CHAR_SIZE) FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - case (CONFIG_SYS_FLASH_CHAR_SIZE) SST_MANUFACT: - info->flash_id = FLASH_MAN_SST; - break; - case (CONFIG_SYS_FLASH_CHAR_SIZE) STM_MANUFACT: - info->flash_id = FLASH_MAN_STM; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return 0; /* no or unknown flash */ - } - - value = (CONFIG_SYS_FLASH_CHAR_SIZE)addr2[2]; /* device ID */ - DEBUGF("\nFLASH DEVICEID: %x\n", value); - - switch (value) { - case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ - break; - - case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_F040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ - break; - - case (CONFIG_SYS_FLASH_CHAR_SIZE) STM_ID_M29W040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ - break; - - case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_F016D: - info->flash_id += FLASH_AMD016; - info->sector_count = 32; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV033C: - info->flash_id += FLASH_AMDLV033C; - info->sector_count = 64; - info->size = 0x00400000; - break; /* => 4 MB */ - - case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV400T: - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 0.5 MB */ - - case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV400B: - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 0.5 MB */ - - case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_MIRROR: - if ((CONFIG_SYS_FLASH_CHAR_SIZE)addr2[0x1c] == (CONFIG_SYS_FLASH_CHAR_SIZE)AMD_ID_LV128U_2 - && (CONFIG_SYS_FLASH_CHAR_SIZE)addr2[0x1e] == (CONFIG_SYS_FLASH_CHAR_SIZE)AMD_ID_LV128U_3) { - info->flash_id += FLASH_AMLV128U; - info->sector_count = 256; - info->size = 0x01000000; - } else if ((CONFIG_SYS_FLASH_CHAR_SIZE)addr2[0x1c] == (CONFIG_SYS_FLASH_CHAR_SIZE)AMD_ID_GL128N_2 - && (CONFIG_SYS_FLASH_CHAR_SIZE)addr2[0x1e] == (CONFIG_SYS_FLASH_CHAR_SIZE)AMD_ID_GL128N_3 ) { - info->flash_id += FLASH_S29GL128N; - info->sector_count = 128; - info->size = 0x01000000; - } - else - info->flash_id = FLASH_UNKNOWN; - break; /* => 2 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - return 0; /* => no or unknown flash */ - } - - /* set up sector start address table */ - if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000); - } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMLV128U) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000); - } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_S29GL128N ) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00020000); - } else { - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = - base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]); - - /* For AMD29033C flash we need to resend the command of * - * reading flash protection for upper 8 Mb of flash */ - if (i == 32) { - addr2[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA; - addr2[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555; - addr2[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) - info->protect[i] = 0; - else - info->protect[i] = (CONFIG_SYS_FLASH_CHAR_SIZE)addr2[4] & 1; - } - - /* issue bank reset to return to read mode */ - addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xF0F0F0F0; - return info->size; -} - -static int wait_for_DQ7_2(flash_info_t * info, int sect) -{ - ulong start, now, last; - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = - (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]); - - start = get_timer(0); - last = start; - while (((CONFIG_SYS_FLASH_WORD_SIZE)addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80808080) != - (CONFIG_SYS_FLASH_WORD_SIZE) 0x80808080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - return -1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc('.'); - last = now; - } - } - return 0; -} - -static int flash_erase_2(flash_info_t * info, int s_first, int s_last) -{ - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]); - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2; - int flag, prot, sect; - int i; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf("- missing\n"); - } else { - printf("- no sectors to erase\n"); - } - return 1; - } - - if (info->flash_id == FLASH_UNKNOWN) { - printf("Can't erase unknown flash type - aborted\n"); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf("\n"); - } - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]); - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { - addr[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA; - addr[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555; - addr[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x80808080; - addr[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA; - addr[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555; - addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x50505050; /* block erase */ - for (i = 0; i < 50; i++) - udelay(1000); /* wait 1 ms */ - } else { - addr[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA; - addr[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555; - addr[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x80808080; - addr[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA; - addr[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555; - addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x30303030; /* sector erase */ - } - /* - * Wait for each sector to complete, it's more - * reliable. According to AMD Spec, you must - * issue all erase commands within a specified - * timeout. This has been seen to fail, especially - * if printf()s are included (for debug)!! - */ - wait_for_DQ7_2(info, sect); - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay(1000); - - /* reset to read mode */ - addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0]; - addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xF0F0F0F0; /* reset bank */ - - printf(" done\n"); - return 0; -} - -static int write_word_2(flash_info_t * info, ulong dest, ulong data) -{ - ulong *data_ptr = &data; - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[0]); - volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *)dest; - volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *)data_ptr; - ulong start; - int i; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return 2; - } - - for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) { - int flag; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr2[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA; - addr2[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555; - addr2[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xA0A0A0A0; - - dest2[i] = data2[i]; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer(0); - while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80808080) != - (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80808080)) { - - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return 1; - } - } - } - - return 0; -} - -#endif /* FLASH_BASE1_PRELIM */ diff --git a/board/amcc/taihu/lcd.c b/board/amcc/taihu/lcd.c deleted file mode 100644 index c7c7fa4..0000000 --- a/board/amcc/taihu/lcd.c +++ /dev/null @@ -1,237 +0,0 @@ -/* - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <common.h> -#include <command.h> -#include <asm/io.h> -#include <asm/ppc4xx-gpio.h> - -#define LCD_CMD_ADDR 0x50100002 -#define LCD_DATA_ADDR 0x50100003 -#define LCD_BLK_CTRL CPLD_REG1_ADDR - -static char *amcc_logo = "AMCC 405EP TAIHU EVALUATION KIT"; -static int addr_flag = 0x80; - -static void lcd_bl_ctrl(char val) -{ - out_8((u8 *) LCD_BLK_CTRL, in_8((u8 *) LCD_BLK_CTRL) | val); -} - -static void lcd_putc(int val) -{ - int i = 100; - char addr; - - while (i--) { - if ((in_8((u8 *) LCD_CMD_ADDR) & 0x80) != 0x80) { /*BF = 1 ?*/ - udelay(50); - break; - } - udelay(50); - } - - if (in_8((u8 *) LCD_CMD_ADDR) & 0x80) { - printf("LCD is busy\n"); - return; - } - - addr = in_8((u8 *) LCD_CMD_ADDR); - udelay(50); - if ((addr != 0) && (addr % 0x10 == 0)) { - addr_flag ^= 0x40; - out_8((u8 *) LCD_CMD_ADDR, addr_flag); - } - - udelay(50); - out_8((u8 *) LCD_DATA_ADDR, val); - udelay(50); -} - -static void lcd_puts(char *s) -{ - char *p = s; - int i = 100; - - while (i--) { - if ((in_8((u8 *) LCD_CMD_ADDR) & 0x80) != 0x80) { /*BF = 1 ?*/ - udelay(50); - break; - } - udelay(50); - } - - if (in_8((u8 *) LCD_CMD_ADDR) & 0x80) { - printf("LCD is busy\n"); - return; - } - - while (*p) - lcd_putc(*p++); -} - -static void lcd_put_logo(void) -{ - int i = 100; - char *p = amcc_logo; - - while (i--) { - if ((in_8((u8 *) LCD_CMD_ADDR) & 0x80) != 0x80) { /*BF = 1 ?*/ - udelay(50); - break; - } - udelay(50); - } - - if (in_8((u8 *) LCD_CMD_ADDR) & 0x80) { - printf("LCD is busy\n"); - return; - } - - out_8((u8 *) LCD_CMD_ADDR, 0x80); - while (*p) - lcd_putc(*p++); -} - -int lcd_init(void) -{ - puts("LCD: "); - out_8((u8 *) LCD_CMD_ADDR, 0x38); /* set function:8-bit,2-line,5x7 font type */ - udelay(50); - out_8((u8 *) LCD_CMD_ADDR, 0x0f); /* set display on,cursor on,blink on */ - udelay(50); - out_8((u8 *) LCD_CMD_ADDR, 0x01); /* display clear */ - udelay(2000); - out_8((u8 *) LCD_CMD_ADDR, 0x06); /* set entry */ - udelay(50); - lcd_bl_ctrl(0x02); /* set backlight on */ - lcd_put_logo(); - puts("ready\n"); - - return 0; -} - -static int do_lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - out_8((u8 *) LCD_CMD_ADDR, 0x01); - udelay(2000); - - return 0; -} - -static int do_lcd_puts (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - if (argc < 2) - return cmd_usage(cmdtp); - - lcd_puts(argv[1]); - - return 0; -} - -static int do_lcd_putc (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - if (argc < 2) - return cmd_usage(cmdtp); - - lcd_putc((char)argv[1][0]); - - return 0; -} - -static int do_lcd_cur (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - ulong count; - ulong dir; - char cur_addr; - - if (argc < 3) - return cmd_usage(cmdtp); - - count = simple_strtoul(argv[1], NULL, 16); - if (count > 31) { - printf("unable to shift > 0x20\n"); - count = 0; - } - - dir = simple_strtoul(argv[2], NULL, 16); - cur_addr = in_8((u8 *) LCD_CMD_ADDR); - udelay(50); - - if (dir == 0x0) { - if (addr_flag == 0x80) { - if (count >= (cur_addr & 0xf)) { - out_8((u8 *) LCD_CMD_ADDR, 0x80); - udelay(50); - count = 0; - } - } else { - if (count >= ((cur_addr & 0x0f) + 0x0f)) { - out_8((u8 *) LCD_CMD_ADDR, 0x80); - addr_flag = 0x80; - udelay(50); - count = 0x0; - } else if (count >= ( cur_addr & 0xf)) { - count -= cur_addr & 0xf ; - out_8((u8 *) LCD_CMD_ADDR, 0x80 | 0xf); - addr_flag = 0x80; - udelay(50); - } - } - } else { - if (addr_flag == 0x80) { - if (count >= (0x1f - (cur_addr & 0xf))) { - count = 0x0; - addr_flag = 0xc0; - out_8((u8 *) LCD_CMD_ADDR, 0xc0 | 0xf); - udelay(50); - } else if ((count + (cur_addr & 0xf ))>= 0x0f) { - count = count + (cur_addr & 0xf) - 0x0f; - addr_flag = 0xc0; - out_8((u8 *) LCD_CMD_ADDR, 0xc0); - udelay(50); - } - } else if ((count + (cur_addr & 0xf )) >= 0x0f) { - count = 0x0; - out_8((u8 *) LCD_CMD_ADDR, 0xC0 | 0x0F); - udelay(50); - } - } - while (count--) { - if (dir == 0) - out_8((u8 *) LCD_CMD_ADDR, 0x10); - else - out_8((u8 *) LCD_CMD_ADDR, 0x14); - udelay(50); - } - - return 0; -} - -U_BOOT_CMD( - lcd_cls, 1, 1, do_lcd_clear, - "lcd clear display", - "" -); - -U_BOOT_CMD( - lcd_puts, 2, 1, do_lcd_puts, - "display string on lcd", - "<string> - <string> to be displayed" -); - -U_BOOT_CMD( - lcd_putc, 2, 1, do_lcd_putc, - "display char on lcd", - "<char> - <char> to be displayed" -); - -U_BOOT_CMD( - lcd_cur, 3, 1, do_lcd_cur, - "shift cursor on lcd", - "<count> <dir> - shift cursor on lcd <count> times, direction is <dir> \n" - " <count> - 0..31\n" - " <dir> - 0=backward 1=forward" -); diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c deleted file mode 100644 index fcb8936..0000000 --- a/board/amcc/taihu/taihu.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * (C) Copyright 2000-2005 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * (C) Copyright 2005-2007 - * Beijing UD Technology Co., Ltd., taihusupport(a)amcc.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <command.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <spi.h> -#include <netdev.h> -#include <asm/ppc4xx-gpio.h> - -extern int lcd_init(void); - -/* - * board_early_init_f - */ -int board_early_init_f(void) -{ - lcd_init(); - - mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ - mtdcr(UIC0ER, 0x00000000); /* disable all ints */ - mtdcr(UIC0CR, 0x00000000); - mtdcr(UIC0PR, 0xFFFF7F00); /* set int polarities */ - mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */ - mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ - mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ - - mtebc(PB3AP, CONFIG_SYS_EBC_PB3AP); /* memory bank 3 (CPLD_LCM) initialization */ - mtebc(PB3CR, CONFIG_SYS_EBC_PB3CR); - - /* - * Configure CPC0_PCI to enable PerWE as output - * and enable the internal PCI arbiter - */ - mtdcr(CPC0_PCI, CPC0_PCI_SPE | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN); - - return 0; -} - -/* - * Check Board Identity: - */ -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - puts("Board: Taihu - AMCC PPC405EP Evaluation Board"); - - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - return 0; -} - -static int do_sw_stat(cmd_tbl_t* cmd_tp, int flags, int argc, char * const argv[]) -{ - char stat; - int i; - - stat = in_8((u8 *) CPLD_REG0_ADDR); - printf("SW2 status: "); - for (i=0; i<4; i++) /* 4-position */ - printf("%d:%s ", i, stat & (0x08 >> i)?"on":"off"); - printf("\n"); - return 0; -} - -U_BOOT_CMD ( - sw2_stat, 1, 1, do_sw_stat, - "show status of switch 2", - "" -); - -static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char * const argv[]) -{ - int led_no; - - if (argc != 3) - return cmd_usage(cmd_tp); - - led_no = simple_strtoul(argv[1], NULL, 16); - if (led_no != 1 && led_no != 2) - return cmd_usage(cmd_tp); - - if (strcmp(argv[2],"off") == 0x0) { - if (led_no == 1) - gpio_write_bit(30, 1); - else - gpio_write_bit(31, 1); - } else if (strcmp(argv[2],"on") == 0x0) { - if (led_no == 1) - gpio_write_bit(30, 0); - else - gpio_write_bit(31, 0); - } else { - return cmd_usage(cmd_tp); - } - - return 0; -} - -U_BOOT_CMD ( - led_ctl, 3, 1, do_led_ctl, - "make led 1 or 2 on or off", - "<led_no> <on/off> - make led <led_no> on/off,\n" - "\tled_no is 1 or 2" -); - -#define SPI_CS_GPIO0 0 -#define SPI_SCLK_GPIO14 14 -#define SPI_DIN_GPIO15 15 -#define SPI_DOUT_GPIO16 16 - -void spi_scl(int bit) -{ - gpio_write_bit(SPI_SCLK_GPIO14, bit); -} - -void spi_sda(int bit) -{ - gpio_write_bit(SPI_DOUT_GPIO16, bit); -} - -unsigned char spi_read(void) -{ - return (unsigned char)gpio_read_in_bit(SPI_DIN_GPIO15); -} - -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - return bus == 0 && cs == 0; -} - -void spi_cs_activate(struct spi_slave *slave) -{ - gpio_write_bit(SPI_CS_GPIO0, 1); -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - gpio_write_bit(SPI_CS_GPIO0, 0); -} - -#ifdef CONFIG_PCI -static unsigned char int_lines[32] = { - 29, 30, 27, 28, 29, 30, 25, 27, - 29, 30, 27, 28, 29, 30, 27, 28, - 29, 30, 27, 28, 29, 30, 27, 28, - 29, 30, 27, 28, 29, 30, 27, 28}; - -static void taihu_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) -{ - unsigned char int_line = int_lines[PCI_DEV(dev) & 31]; - - pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line); -} - -int pci_pre_init(struct pci_controller *hose) -{ - hose->fixup_irq = taihu_pci_fixup_irq; - return 1; -} -#endif /* CONFIG_PCI */ - -int board_eth_init(bd_t *bis) -{ - cpu_eth_init(bis); - return pci_eth_init(bis); -} diff --git a/board/amcc/taihu/update.c b/board/amcc/taihu/update.c deleted file mode 100644 index ace217d..0000000 --- a/board/amcc/taihu/update.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <common.h> -#include <command.h> -#include <asm/processor.h> -#include <i2c.h> - -#define PCI_M66EN 0x10 - -static uchar buf_33[] = -{ - 0xb5, /* 0x00:hce =1, bss = 0, pae=1, ppdv= 0b10,spe = 1,ebw=0b01*/ - 0x80, /* 0x01~0x03:ptm1ms =0x80000001 */ - 0x00, - 0x00, - 0x00, /* 0x04~0x06:ptm1la = 0x00000000 */ - 0x00, - 0x00, - 0x00, /* 0x07~0x09:ptm2ma = 0x00000000 */ - 0x00, - 0x00, - 0x00, /* 0x0a~0x0c:ptm2la = 0x00000000 */ - 0x00, - 0x00, - 0x10, /* 0x0d~0x0e:vendor id 0x1014*/ - 0x14, - 0x00, /* 0x0f~0x10:device id 0x0000*/ - 0x00, - 0x00, /* 0x11:revision 0x00 */ - 0x00, /* 0x12~0x14:class 0x000000 */ - 0x00, - 0x00, - 0x10, /* 0x15~0x16:subsystem vendor id */ - 0xe8, - 0x00, /* 0x17~0x18:subsystem device id */ - 0x00, - 0x61, /* 0x19: opdv=0b01,cbdv=0b10,ccdv=0b00,ptm2ms_ena=0, ptm1ms_ena=1 */ - 0x68, /* 0x1a: rpci=1,fbmul=0b1010,epdv=0b00 */ - 0x2d, /* 0x1b: fwdvb=0b101,fwdva=0b101 */ - 0x82, /* 0x1c: pllr=1,sscs=0,mpdv=0b00,tun[22-23]=0b10 */ - 0xbe, /* 0x1d: tun[24-31]=0xbe */ - 0x00, - 0x00 -}; - -static uchar buf_66[] = -{ - 0xb5, /* 0x00:hce =1, bss = 0, pae=1, ppdv= 0b10,spe = 1,ebw=0b01*/ - 0x80, /* 0x01~0x03:ptm1ms =0x80000001 */ - 0x00, - 0x00, - 0x00, /* 0x04~0x06:ptm1la = 0x00000000 */ - 0x00, - 0x00, - 0x00, /* 0x07~0x09:ptm2ma = 0x00000000 */ - 0x00, - 0x00, - 0x00, /* 0x0a~0x0c:ptm2la = 0x00000000 */ - 0x00, - 0x00, - 0x10, /* 0x0d~0x0e:vendor id 0x1014*/ - 0x14, - 0x00, /* 0x0f~0x10:device id 0x0000*/ - 0x00, - 0x00, /* 0x11:revision 0x00 */ - 0x00, /* 0x12~0x14:class 0x000000 */ - 0x00, - 0x00, - 0x10, /* 0x15~0x16:subsystem vendor id */ - 0xe8, - 0x00, /* 0x17~0x18:subsystem device id */ - 0x00, - 0x61, /* 0x19: opdv=0b01,cbdv=0b10,ccdv=0b00,ptm2ms_ena=0, ptm1ms_ena=1 */ - 0x68, /* 0x1a: rpci=1,fbmul=0b1010,epdv=0b00 */ - 0x2d, /* 0x1b: fwdvb=0b101,fwdva=0b101 */ - 0x82, /* 0x1c: pllr=1,sscs=0,mpdv=0b00,tun[22-23]=0b10 */ - 0xbe, /* 0x1d: tun[24-31]=0xbe */ - 0x00, - 0x00 -}; - -static int update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char * const argv[]) -{ - ulong len = 0x20; - uchar chip = CONFIG_SYS_I2C_EEPROM_ADDR; - uchar *pbuf; - uchar base; - int i; - - if ((*(volatile char*)CPLD_REG0_ADDR & PCI_M66EN) != PCI_M66EN) { - pbuf = buf_33; - base = 0x00; - } else { - pbuf = buf_66; - base = 0x40; - } - - for (i = 0; i< len; i++, base++) { - if (i2c_write(chip, base, 1, &pbuf[i],1)!= 0) { - printf("i2c_write fail\n"); - return 1; - } - udelay(11000); - } - - return 0; -} - -U_BOOT_CMD ( - update_boot_eeprom, 1, 1, update_boot_eeprom, - "update boot eeprom content", - "" -); diff --git a/board/amcc/taishan/Kconfig b/board/amcc/taishan/Kconfig deleted file mode 100644 index abd07f5..0000000 --- a/board/amcc/taishan/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_TAISHAN - -config SYS_BOARD - default "taishan" - -config SYS_VENDOR - default "amcc" - -config SYS_CONFIG_NAME - default "taishan" - -endif diff --git a/board/amcc/taishan/MAINTAINERS b/board/amcc/taishan/MAINTAINERS deleted file mode 100644 index d9d80bf..0000000 --- a/board/amcc/taishan/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -TAISHAN BOARD -M: Stefan Roese <sr(a)denx.de> -S: Maintained -F: board/amcc/taishan/ -F: include/configs/taishan.h -F: configs/taishan_defconfig diff --git a/board/amcc/taishan/Makefile b/board/amcc/taishan/Makefile deleted file mode 100644 index 04e93cc..0000000 --- a/board/amcc/taishan/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2007 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = taishan.o lcd.o update.o showinfo.o -extra-y += init.o diff --git a/board/amcc/taishan/config.mk b/board/amcc/taishan/config.mk deleted file mode 100644 index 6de8b59..0000000 --- a/board/amcc/taishan/config.mk +++ /dev/null @@ -1,20 +0,0 @@ -# -# (C) Copyright 2004 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# AMCC 440GX Reference Platform (Taishan) board -# - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif diff --git a/board/amcc/taishan/init.S b/board/amcc/taishan/init.S deleted file mode 100644 index ab1bb34..0000000 --- a/board/amcc/taishan/init.S +++ /dev/null @@ -1,35 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <ppc_asm.tmpl> -#include <asm/mmu.h> -#include <config.h> -#include <asm/ppc4xx.h> - -/************************************************************************** - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - *************************************************************************/ - - .section .bootpg,"ax" - .globl tlbtab - -tlbtab: - tlbtab_start - tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_RWX | SA_IG) - tlbentry( CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_RW | SA_IG) - tlbentry( CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_RWX ) - tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_RWX | SA_IG ) - tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_RW | SA_IG ) - tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_RW | SA_IG ) - tlbtab_end diff --git a/board/amcc/taishan/lcd.c b/board/amcc/taishan/lcd.c deleted file mode 100644 index 124b81e..0000000 --- a/board/amcc/taishan/lcd.c +++ /dev/null @@ -1,358 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <common.h> -#include <command.h> -#include <i2c.h> -#include <miiphy.h> - -#ifdef CONFIG_TAISHAN - -#define LCD_DELAY_NORMAL_US 100 -#define LCD_DELAY_NORMAL_MS 2 -#define LCD_CMD_ADDR ((volatile char *)(CONFIG_SYS_EBC2_LCM_BASE)) -#define LCD_DATA_ADDR ((volatile char *)(CONFIG_SYS_EBC2_LCM_BASE+1)) -#define LCD_BLK_CTRL ((volatile char *)(CONFIG_SYS_EBC1_FPGA_BASE+0x2)) - -static int g_lcd_init_b = 0; -static char *amcc_logo = " AMCC TAISHAN 440GX EvalBoard"; -static char addr_flag = 0x80; - -static void lcd_bl_ctrl(char val) -{ - char cpld_val; - - cpld_val = *LCD_BLK_CTRL; - *LCD_BLK_CTRL = val | cpld_val; -} - -static void lcd_putc(char val) -{ - int i = 100; - char addr; - - while (i--) { - if ((*LCD_CMD_ADDR & 0x80) != 0x80) { /*BF = 1 ? */ - udelay(LCD_DELAY_NORMAL_US); - break; - } - udelay(LCD_DELAY_NORMAL_US); - } - - if (*LCD_CMD_ADDR & 0x80) { - printf("LCD is busy\n"); - return; - } - - addr = *LCD_CMD_ADDR; - udelay(LCD_DELAY_NORMAL_US); - if ((addr != 0) && (addr % 0x10 == 0)) { - addr_flag ^= 0x40; - *LCD_CMD_ADDR = addr_flag; - } - - udelay(LCD_DELAY_NORMAL_US); - *LCD_DATA_ADDR = val; - udelay(LCD_DELAY_NORMAL_US); -} - -static void lcd_puts(char *s) -{ - char *p = s; - int i = 100; - - while (i--) { - if ((*LCD_CMD_ADDR & 0x80) != 0x80) { /*BF = 1 ? */ - udelay(LCD_DELAY_NORMAL_US); - break; - } - udelay(LCD_DELAY_NORMAL_US); - } - - if (*LCD_CMD_ADDR & 0x80) { - printf("LCD is busy\n"); - return; - } - - while (*p) - lcd_putc(*p++); -} - -static void lcd_put_logo(void) -{ - int i = 100; - char *p = amcc_logo; - - while (i--) { - if ((*LCD_CMD_ADDR & 0x80) != 0x80) { /*BF = 1 ? */ - udelay(LCD_DELAY_NORMAL_US); - break; - } - udelay(LCD_DELAY_NORMAL_US); - } - - if (*LCD_CMD_ADDR & 0x80) { - printf("LCD is busy\n"); - return; - } - - *LCD_CMD_ADDR = 0x80; - while (*p) - lcd_putc(*p++); -} - -int lcd_init(void) -{ - if (g_lcd_init_b == 0) { - puts("LCD: "); - mdelay(100); /* Waiting for the LCD initialize */ - - *LCD_CMD_ADDR = 0x38; /*set function:8-bit,2-line,5x7 font type */ - udelay(LCD_DELAY_NORMAL_US); - - *LCD_CMD_ADDR = 0x0f; /*set display on,cursor on,blink on */ - udelay(LCD_DELAY_NORMAL_US); - - *LCD_CMD_ADDR = 0x01; /*display clear */ - mdelay(LCD_DELAY_NORMAL_MS); - - *LCD_CMD_ADDR = 0x06; /*set entry */ - udelay(LCD_DELAY_NORMAL_US); - - lcd_bl_ctrl(0x02); - lcd_put_logo(); - - puts(" ready\n"); - g_lcd_init_b = 1; - } - - return 0; -} - -static int do_lcd_test(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - lcd_init(); - return 0; -} - -static int do_lcd_clear(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - *LCD_CMD_ADDR = 0x01; - mdelay(LCD_DELAY_NORMAL_MS); - return 0; -} -static int do_lcd_puts(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - if (argc < 2) - return cmd_usage(cmdtp); - - lcd_puts(argv[1]); - return 0; -} -static int do_lcd_putc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - if (argc < 2) - return cmd_usage(cmdtp); - - lcd_putc((char)argv[1][0]); - return 0; -} -static int do_lcd_cur(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - ulong count; - ulong dir; - char cur_addr; - - if (argc < 3) - return cmd_usage(cmdtp); - - count = simple_strtoul(argv[1], NULL, 16); - if (count > 31) { - printf("unable to shift > 0x20\n"); - count = 0; - } - - dir = simple_strtoul(argv[2], NULL, 16); - cur_addr = *LCD_CMD_ADDR; - udelay(LCD_DELAY_NORMAL_US); - if (dir == 0x0) { - if (addr_flag == 0x80) { - if (count >= (cur_addr & 0xf)) { - *LCD_CMD_ADDR = 0x80; - udelay(LCD_DELAY_NORMAL_US); - count = 0; - } - } else { - if (count >= ((cur_addr & 0x0f) + 0x0f)) { - *LCD_CMD_ADDR = 0x80; - addr_flag = 0x80; - udelay(LCD_DELAY_NORMAL_US); - count = 0x0; - } else if (count >= (cur_addr & 0xf)) { - count -= cur_addr & 0xf; - *LCD_CMD_ADDR = 0x80 | 0xf; - addr_flag = 0x80; - udelay(LCD_DELAY_NORMAL_US); - } - } - } else { - if (addr_flag == 0x80) { - if (count >= (0x1f - (cur_addr & 0xf))) { - count = 0x0; - addr_flag = 0xc0; - *LCD_CMD_ADDR = 0xc0 | 0xf; - udelay(LCD_DELAY_NORMAL_US); - } else if ((count + (cur_addr & 0xf)) >= 0x0f) { - count = count + (cur_addr & 0xf) - 0x0f; - addr_flag = 0xc0; - *LCD_CMD_ADDR = 0xc0; - udelay(LCD_DELAY_NORMAL_US); - } - } else if ((count + (cur_addr & 0xf)) >= 0x0f) { - count = 0x0; - *LCD_CMD_ADDR = 0xc0 | 0xf; - udelay(LCD_DELAY_NORMAL_US); - } - } - - while (count--) { - if (dir == 0) { - *LCD_CMD_ADDR = 0x10; - } else { - *LCD_CMD_ADDR = 0x14; - } - udelay(LCD_DELAY_NORMAL_US); - } - - return 0; -} - -U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", ""); -U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", ""); -U_BOOT_CMD(lcd_puts, 2, 1, do_lcd_puts, - "display string on lcd", - "<string> - <string> to be displayed"); -U_BOOT_CMD(lcd_putc, 2, 1, do_lcd_putc, - "display char on lcd", - "<char> - <char> to be displayed"); -U_BOOT_CMD(lcd_cur, 3, 1, do_lcd_cur, - "shift cursor on lcd", - "<count> <dir>- shift cursor on lcd <count> times, direction is <dir> \n" - " <count> - 0~31\n" " <dir> - 0,backward; 1, forward"); - -#if 0 /* test-only */ -void set_phy_loopback_mode(void) -{ - char devemac2[32]; - char devemac3[32]; - - sprintf(devemac2, "%s2", CONFIG_EMAC_DEV_NAME); - sprintf(devemac3, "%s3", CONFIG_EMAC_DEV_NAME); - -#if 0 - unsigned short reg_short; - - miiphy_read(devemac2, 0x1, 1, &reg_short); - if (reg_short & 0x04) { - /* - * printf("EMAC2 link up,do nothing\n"); - */ - } else { - udelay(1000); - miiphy_write(devemac2, 0x1, 0, 0x6000); - udelay(1000); - miiphy_read(devemac2, 0x1, 0, &reg_short); - if (reg_short != 0x6000) { - printf - ("\nEMAC2 error set LOOPBACK mode error,reg2[0]=%x\n", - reg_short); - } - } - - miiphy_read(devemac3, 0x3, 1, &reg_short); - if (reg_short & 0x04) { - /* - * printf("EMAC3 link up,do nothing\n"); - */ - } else { - udelay(1000); - miiphy_write(devemac3, 0x3, 0, 0x6000); - udelay(1000); - miiphy_read(devemac3, 0x3, 0, &reg_short); - if (reg_short != 0x6000) { - printf - ("\nEMAC3 error set LOOPBACK mode error,reg2[0]=%x\n", - reg_short); - } - } -#else - /* Set PHY as LOOPBACK MODE, for Linux emac initializing */ - miiphy_write(devemac2, CONFIG_PHY2_ADDR, 0, 0x6000); - udelay(1000); - miiphy_write(devemac3, CONFIG_PHY3_ADDR, 0, 0x6000); - udelay(1000); -#endif /* 0 */ -} - -void set_phy_normal_mode(void) -{ - char devemac2[32]; - char devemac3[32]; - unsigned short reg_short; - - sprintf(devemac2, "%s2", CONFIG_EMAC_DEV_NAME); - sprintf(devemac3, "%s3", CONFIG_EMAC_DEV_NAME); - - /* Set phy of EMAC2 */ - miiphy_read(devemac2, CONFIG_PHY2_ADDR, 0x16, &reg_short); - reg_short &= ~(0x7); - reg_short |= 0x6; /* RGMII DLL Delay */ - miiphy_write(devemac2, CONFIG_PHY2_ADDR, 0x16, reg_short); - - miiphy_read(devemac2, CONFIG_PHY2_ADDR, 0x17, &reg_short); - reg_short &= ~(0x40); - miiphy_write(devemac2, CONFIG_PHY2_ADDR, 0x17, reg_short); - - miiphy_write(devemac2, CONFIG_PHY2_ADDR, 0x1c, 0x74f0); - - /* Set phy of EMAC3 */ - miiphy_read(devemac3, CONFIG_PHY3_ADDR, 0x16, &reg_short); - reg_short &= ~(0x7); - reg_short |= 0x6; /* RGMII DLL Delay */ - miiphy_write(devemac3, CONFIG_PHY3_ADDR, 0x16, reg_short); - - miiphy_read(devemac3, CONFIG_PHY3_ADDR, 0x17, &reg_short); - reg_short &= ~(0x40); - miiphy_write(devemac3, CONFIG_PHY3_ADDR, 0x17, reg_short); - - miiphy_write(devemac3, CONFIG_PHY3_ADDR, 0x1c, 0x74f0); -} -#endif /* 0 - test only */ - -static int do_led_test_off(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - volatile unsigned int *GpioOr = - (volatile unsigned int *)(CONFIG_SYS_PERIPHERAL_BASE + 0x700); - *GpioOr |= 0x00300000; - return 0; -} - -static int do_led_test_on(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - volatile unsigned int *GpioOr = - (volatile unsigned int *)(CONFIG_SYS_PERIPHERAL_BASE + 0x700); - *GpioOr &= ~0x00300000; - return 0; -} - -U_BOOT_CMD(ledon, 1, 1, do_led_test_on, - "led test light on", ""); - -U_BOOT_CMD(ledoff, 1, 1, do_led_test_off, - "led test light off", ""); -#endif diff --git a/board/amcc/taishan/showinfo.c b/board/amcc/taishan/showinfo.c deleted file mode 100644 index 53bfdf7..0000000 --- a/board/amcc/taishan/showinfo.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <common.h> -#include <command.h> -#include <asm/processor.h> -#include <pci.h> - -void show_reset_reg(void) -{ - unsigned long reg; - - /* read clock regsiter */ - printf("===== Display reset and initialize register Start =========\n"); - mfcpr(CPR0_PLLC,reg); - printf("cpr_pllc = %#010lx\n",reg); - - mfcpr(CPR0_PLLD,reg); - printf("cpr_plld = %#010lx\n",reg); - - mfcpr(CPR0_PRIMAD0,reg); - printf("cpr_primad = %#010lx\n",reg); - - mfcpr(CPR0_PRIMBD0,reg); - printf("cpr_primbd = %#010lx\n",reg); - - mfcpr(CPR0_OPBD0,reg); - printf("cpr_opbd = %#010lx\n",reg); - - mfcpr(CPR0_PERD,reg); - printf("cpr_perd = %#010lx\n",reg); - - mfcpr(CPR0_MALD,reg); - printf("cpr_mald = %#010lx\n",reg); - - /* read sdr register */ - mfsdr(SDR0_EBC,reg); - printf("SDR0_EBC = %#010lx\n",reg); - - mfsdr(SDR0_CP440,reg); - printf("SDR0_CP440 = %#010lx\n",reg); - - mfsdr(SDR0_XCR,reg); - printf("SDR0_XCR = %#010lx\n",reg); - - mfsdr(SDR0_XPLLC,reg); - printf("SDR0_XPLLC = %#010lx\n",reg); - - mfsdr(SDR0_XPLLD,reg); - printf("SDR0_XPLLD = %#010lx\n",reg); - - mfsdr(SDR0_PFC0,reg); - printf("SDR0_PFC0 = %#010lx\n",reg); - - mfsdr(SDR0_PFC1,reg); - printf("SDR0_PFC1 = %#010lx\n",reg); - - mfsdr(SDR0_CUST0,reg); - printf("SDR0_CUST0 = %#010lx\n",reg); - - mfsdr(SDR0_CUST1,reg); - printf("SDR0_CUST1 = %#010lx\n",reg); - - mfsdr(SDR0_UART0,reg); - printf("SDR0_UART0 = %#010lx\n",reg); - - mfsdr(SDR0_UART1,reg); - printf("SDR0_UART1 = %#010lx\n",reg); - - printf("===== Display reset and initialize register End =========\n"); -} - -void show_xbridge_info(void) -{ - unsigned long reg; - - printf("PCI-X chip control registers\n"); - mfsdr(SDR0_XCR, reg); - printf("SDR0_XCR = %#010lx\n", reg); - - mfsdr(SDR0_XPLLC, reg); - printf("SDR0_XPLLC = %#010lx\n", reg); - - mfsdr(SDR0_XPLLD, reg); - printf("SDR0_XPLLD = %#010lx\n", reg); - - printf("PCI-X Bridge Configure registers\n"); - printf("PCIL0_VENDID = %#06x\n", in16r(PCIL0_VENDID)); - printf("PCIL0_DEVID = %#06x\n", in16r(PCIL0_DEVID)); - printf("PCIL0_CMD = %#06x\n", in16r(PCIL0_CMD)); - printf("PCIL0_STATUS = %#06x\n", in16r(PCIL0_STATUS)); - printf("PCIL0_REVID = %#04x\n", in8(PCIL0_REVID)); - printf("PCIL0_CACHELS = %#04x\n", in8(PCIL0_CACHELS)); - printf("PCIL0_LATTIM = %#04x\n", in8(PCIL0_LATTIM)); - printf("PCIL0_HDTYPE = %#04x\n", in8(PCIL0_HDTYPE)); - printf("PCIL0_BIST = %#04x\n", in8(PCIL0_BIST)); - - printf("PCIL0_BAR0 = %#010lx\n", in32r(PCIL0_BAR0)); - printf("PCIL0_BAR1 = %#010lx\n", in32r(PCIL0_BAR1)); - printf("PCIL0_BAR2 = %#010lx\n", in32r(PCIL0_BAR2)); - printf("PCIL0_BAR3 = %#010lx\n", in32r(PCIL0_BAR3)); - printf("PCIL0_BAR4 = %#010lx\n", in32r(PCIL0_BAR4)); - printf("PCIL0_BAR5 = %#010lx\n", in32r(PCIL0_BAR5)); - - printf("PCIL0_CISPTR = %#010lx\n", in32r(PCIL0_CISPTR)); - printf("PCIL0_SBSSYSVID = %#010x\n", in16r(PCIL0_SBSYSVID)); - printf("PCIL0_SBSSYSID = %#010x\n", in16r(PCIL0_SBSYSID)); - printf("PCIL0_EROMBA = %#010lx\n", in32r(PCIL0_EROMBA)); - printf("PCIL0_CAP = %#04x\n", in8(PCIL0_CAP)); - printf("PCIL0_INTLN = %#04x\n", in8(PCIL0_INTLN)); - printf("PCIL0_INTPN = %#04x\n", in8(PCIL0_INTPN)); - printf("PCIL0_MINGNT = %#04x\n", in8(PCIL0_MINGNT)); - printf("PCIL0_MAXLTNCY = %#04x\n", in8(PCIL0_MAXLTNCY)); - - printf("PCIL0_BRDGOPT1 = %#010lx\n", in32r(PCIL0_BRDGOPT1)); - printf("PCIL0_BRDGOPT2 = %#010lx\n", in32r(PCIL0_BRDGOPT2)); - - printf("PCIL0_POM0LAL = %#010lx\n", in32r(PCIL0_POM0LAL)); - printf("PCIL0_POM0LAH = %#010lx\n", in32r(PCIL0_POM0LAH)); - printf("PCIL0_POM0SA = %#010lx\n", in32r(PCIL0_POM0SA)); - printf("PCIL0_POM0PCILAL = %#010lx\n", in32r(PCIL0_POM0PCIAL)); - printf("PCIL0_POM0PCILAH = %#010lx\n", in32r(PCIL0_POM0PCIAH)); - printf("PCIL0_POM1LAL = %#010lx\n", in32r(PCIL0_POM1LAL)); - printf("PCIL0_POM1LAH = %#010lx\n", in32r(PCIL0_POM1LAH)); - printf("PCIL0_POM1SA = %#010lx\n", in32r(PCIL0_POM1SA)); - printf("PCIL0_POM1PCILAL = %#010lx\n", in32r(PCIL0_POM1PCIAL)); - printf("PCIL0_POM1PCILAH = %#010lx\n", in32r(PCIL0_POM1PCIAH)); - printf("PCIL0_POM2SA = %#010lx\n", in32r(PCIL0_POM2SA)); - - printf("PCIL0_PIM0SA = %#010lx\n", in32r(PCIL0_PIM0SA)); - printf("PCIL0_PIM0LAL = %#010lx\n", in32r(PCIL0_PIM0LAL)); - printf("PCIL0_PIM0LAH = %#010lx\n", in32r(PCIL0_PIM0LAH)); - printf("PCIL0_PIM1SA = %#010lx\n", in32r(PCIL0_PIM1SA)); - printf("PCIL0_PIM1LAL = %#010lx\n", in32r(PCIL0_PIM1LAL)); - printf("PCIL0_PIM1LAH = %#010lx\n", in32r(PCIL0_PIM1LAH)); - printf("PCIL0_PIM2SA = %#010lx\n", in32r(PCIL0_PIM1SA)); - printf("PCIL0_PIM2LAL = %#010lx\n", in32r(PCIL0_PIM1LAL)); - printf("PCIL0_PIM2LAH = %#010lx\n", in32r(PCIL0_PIM1LAH)); - - printf("PCIL0_XSTS = %#010lx\n", in32r(PCIL0_STS)); -} - -int do_show_xbridge_info(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - show_xbridge_info(); - return 0; -} - -U_BOOT_CMD(xbriinfo, 1, 1, do_show_xbridge_info, - "Show PCIX bridge info", ""); - -#define TAISHAN_PCI_DEV_ID0 0x800 -#define TAISHAN_PCI_DEV_ID1 0x1000 - -void show_pcix_device_info(void) -{ - int ii; - int dev; - u8 capp; - u8 xcapid; - u16 status; - u16 xcommand; - u32 xstatus; - - for (ii = 0; ii < 2; ii++) { - if (ii == 0) - dev = TAISHAN_PCI_DEV_ID0; - else - dev = TAISHAN_PCI_DEV_ID1; - - pci_read_config_word(dev, PCI_STATUS, &status); - if (status & PCI_STATUS_CAP_LIST) { - pci_read_config_byte(dev, PCI_CAPABILITY_LIST, &capp); - - pci_read_config_byte(dev, (int)(capp), &xcapid); - if (xcapid == 0x07) { - pci_read_config_word(dev, (int)(capp + 2), - &xcommand); - pci_read_config_dword(dev, (int)(capp + 4), - &xstatus); - printf("BUS0 dev%d Xcommand=%#06x,Xstatus=%#010x\n", - (ii + 1), xcommand, xstatus); - } else { - printf("BUS0 dev%d PCI-X CAP ID error," - "CAP=%#04x,XCAPID=%#04x\n", - (ii + 1), capp, xcapid); - } - } else { - printf("BUS0 dev%d not found PCI_STATUS_CAP_LIST supporting\n", - ii + 1); - } - } - -} - -int do_show_pcix_device_info(cmd_tbl_t * cmdtp, int flag, int argc, - char * const argv[]) -{ - show_pcix_device_info(); - return 0; -} - -U_BOOT_CMD(xdevinfo, 1, 1, do_show_pcix_device_info, - "Show PCIX Device info", ""); - -extern void show_reset_reg(void); - -int do_show_reset_reg_info(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - show_reset_reg(); - return 0; -} - -U_BOOT_CMD(resetinfo, 1, 1, do_show_reset_reg_info, - "Show Reset REG info", ""); diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c deleted file mode 100644 index 5c8d9ec..0000000 --- a/board/amcc/taishan/taishan.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * Copyright (C) 2004 PaulReynolds(a)lhsolutions.com - * - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/processor.h> -#include <spd_sdram.h> -#include <asm/ppc4xx-emac.h> -#include <netdev.h> - -#ifdef CONFIG_SYS_INIT_SHOW_RESET_REG -void show_reset_reg(void); -#endif - -DECLARE_GLOBAL_DATA_PTR; - -int lcd_init(void); - -int board_early_init_f (void) -{ - unsigned long reg; - volatile unsigned int *GpioOdr; - volatile unsigned int *GpioTcr; - volatile unsigned int *GpioOr; - - /*-------------------------------------------------------------------------+ - | Initialize EBC CONFIG - +-------------------------------------------------------------------------*/ - mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK | - EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK | - EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | - EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_DEFAULT | - EBC_CFG_PME_DISABLE | EBC_CFG_PR_32); - - /*-------------------------------------------------------------------------+ - | 64MB FLASH. Initialize bank 0 with default values. - +-------------------------------------------------------------------------*/ - mtebc(PB0AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(15) | - EBC_BXAP_BCE_DISABLE | - EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1) | - EBC_BXAP_WBN_ENCODE(1) | EBC_BXAP_WBF_ENCODE(1) | - EBC_BXAP_TH_ENCODE(3) | EBC_BXAP_RE_DISABLED | - EBC_BXAP_BEM_WRITEONLY | - EBC_BXAP_PEN_DISABLED); - mtebc(PB0CR, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | - EBC_BXCR_BS_64MB | EBC_BXCR_BU_RW|EBC_BXCR_BW_32BIT); - - /*-------------------------------------------------------------------------+ - | FPGA. Initialize bank 1 with default values. - +-------------------------------------------------------------------------*/ - mtebc(PB1AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(5) | - EBC_BXAP_BCE_DISABLE | - EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1) | - EBC_BXAP_WBN_ENCODE(1) | EBC_BXAP_WBF_ENCODE(1) | - EBC_BXAP_TH_ENCODE(3) | EBC_BXAP_RE_DISABLED | - EBC_BXAP_BEM_WRITEONLY | - EBC_BXAP_PEN_DISABLED); - mtebc(PB1CR, EBC_BXCR_BAS_ENCODE(0x41000000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT); - - /*-------------------------------------------------------------------------+ - | LCM. Initialize bank 2 with default values. - +-------------------------------------------------------------------------*/ - mtebc(PB2AP, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(64) | - EBC_BXAP_BCE_DISABLE | - EBC_BXAP_CSN_ENCODE(3) | EBC_BXAP_OEN_ENCODE(3) | - EBC_BXAP_WBN_ENCODE(3) | EBC_BXAP_WBF_ENCODE(3) | - EBC_BXAP_TH_ENCODE(7) | EBC_BXAP_RE_DISABLED | - EBC_BXAP_BEM_WRITEONLY | - EBC_BXAP_PEN_DISABLED); - mtebc(PB2CR, EBC_BXCR_BAS_ENCODE(0x42000000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT); - - /*-------------------------------------------------------------------------+ - | TMP. Initialize bank 3 with default values. - +-------------------------------------------------------------------------*/ - mtebc(PB3AP, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(128) | - EBC_BXAP_BCE_DISABLE | - EBC_BXAP_CSN_ENCODE(3) | EBC_BXAP_OEN_ENCODE(3) | - EBC_BXAP_WBN_ENCODE(3) | EBC_BXAP_WBF_ENCODE(3) | - EBC_BXAP_TH_ENCODE(7) | EBC_BXAP_RE_DISABLED | - EBC_BXAP_BEM_WRITEONLY | - EBC_BXAP_PEN_DISABLED); - mtebc(PB3CR, EBC_BXCR_BAS_ENCODE(0x48000000) | - EBC_BXCR_BS_64MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); - - /*-------------------------------------------------------------------------+ - | Connector 4~7. Initialize bank 3~ 7 with default values. - +-------------------------------------------------------------------------*/ - mtebc(PB4AP,0); - mtebc(PB4CR,0); - mtebc(PB5AP,0); - mtebc(PB5CR,0); - mtebc(PB6AP,0); - mtebc(PB6CR,0); - mtebc(PB7AP,0); - mtebc(PB7CR,0); - - /*-------------------------------------------------------------------- - * Setup the interrupt controller polarities, triggers, etc. - *-------------------------------------------------------------------*/ - /* - * Because of the interrupt handling rework to handle 440GX interrupts - * with the common code, we needed to change names of the UIC registers. - * Here the new relationship: - * - * U-Boot name 440GX name - * ----------------------- - * UIC0 UICB0 - * UIC1 UIC0 - * UIC2 UIC1 - * UIC3 UIC2 - */ - mtdcr (UIC1SR, 0xffffffff); /* clear all */ - mtdcr (UIC1ER, 0x00000000); /* disable all */ - mtdcr (UIC1CR, 0x00000009); /* SMI & UIC1 crit are critical */ - mtdcr (UIC1PR, 0xfffffe13); /* per ref-board manual */ - mtdcr (UIC1TR, 0x01c00008); /* per ref-board manual */ - mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (UIC1SR, 0xffffffff); /* clear all */ - - mtdcr (UIC2SR, 0xffffffff); /* clear all */ - mtdcr (UIC2ER, 0x00000000); /* disable all */ - mtdcr (UIC2CR, 0x00000000); /* all non-critical */ - mtdcr (UIC2PR, 0xffffe0ff); /* per ref-board manual */ - mtdcr (UIC2TR, 0x00ffc000); /* per ref-board manual */ - mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (UIC2SR, 0xffffffff); /* clear all */ - - mtdcr (UIC3SR, 0xffffffff); /* clear all */ - mtdcr (UIC3ER, 0x00000000); /* disable all */ - mtdcr (UIC3CR, 0x00000000); /* all non-critical */ - mtdcr (UIC3PR, 0xffffffff); /* per ref-board manual */ - mtdcr (UIC3TR, 0x00ff8c0f); /* per ref-board manual */ - mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (UIC3SR, 0xffffffff); /* clear all */ - - mtdcr (UIC0SR, 0xfc000000); /* clear all */ - mtdcr (UIC0ER, 0x00000000); /* disable all */ - mtdcr (UIC0CR, 0x00000000); /* all non-critical */ - mtdcr (UIC0PR, 0xfc000000); /* */ - mtdcr (UIC0TR, 0x00000000); /* */ - mtdcr (UIC0VR, 0x00000001); /* */ - - /* Enable two GPIO 10~11 and TraceA signal */ - mfsdr(SDR0_PFC0,reg); - reg |= 0x00300000; - mtsdr(SDR0_PFC0,reg); - - mfsdr(SDR0_PFC1,reg); - reg |= 0x00100000; - mtsdr(SDR0_PFC1,reg); - - /* Set GPIO 10 and 11 as output */ - GpioOdr = (volatile unsigned int*)(CONFIG_SYS_PERIPHERAL_BASE+0x718); - GpioTcr = (volatile unsigned int*)(CONFIG_SYS_PERIPHERAL_BASE+0x704); - GpioOr = (volatile unsigned int*)(CONFIG_SYS_PERIPHERAL_BASE+0x700); - - *GpioOdr &= ~(0x00300000); - *GpioTcr |= 0x00300000; - *GpioOr |= 0x00300000; - - return 0; -} - -int misc_init_r(void) -{ - lcd_init(); - - return 0; -} - -int checkboard (void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - printf ("Board: Taishan - AMCC PPC440GX Evaluation Board"); - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc ('\n'); - -#ifdef CONFIG_SYS_INIT_SHOW_RESET_REG - show_reset_reg(); -#endif - - return (0); -} - -int board_eth_init(bd_t *bis) -{ - cpu_eth_init(bis); - return pci_eth_init(bis); -} diff --git a/board/amcc/taishan/update.c b/board/amcc/taishan/update.c deleted file mode 100644 index 2738989..0000000 --- a/board/amcc/taishan/update.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <common.h> -#include <command.h> -#include <asm/processor.h> -#include <i2c.h> - -#if defined(CONFIG_TAISHAN) - -const uchar bootstrap_buf[16] = { - 0x86, - 0x78, - 0xc1, - 0xa6, - 0x09, - 0x67, - 0x04, - 0x63, - 0x00, - 0x00, - 0x00, - 0x00, - 0x00, - 0x00, - 0x00, - 0x00 -}; - -static int update_boot_eeprom(void) -{ - ulong len = 0x10; - uchar chip = CONFIG_SYS_BOOTSTRAP_IIC_ADDR; - uchar *pbuf = (uchar *)bootstrap_buf; - int ii, jj; - - for (ii = 0; ii < len; ii++) { - if (i2c_write(chip, ii, 1, &pbuf[ii], 1) != 0) { - printf("i2c_write failed\n"); - return -1; - } - - /* wait 10ms */ - for (jj = 0; jj < 10; jj++) - udelay(1000); - } - return 0; -} - -int do_update_boot_eeprom(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - return update_boot_eeprom(); -} - -U_BOOT_CMD(update_boot_eeprom, 1, 1, do_update_boot_eeprom, - "update bootstrap eeprom content", ""); -#endif diff --git a/board/amcc/walnut/Kconfig b/board/amcc/walnut/Kconfig deleted file mode 100644 index 94e3dc9..0000000 --- a/board/amcc/walnut/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_WALNUT - -config SYS_BOARD - default "walnut" - -config SYS_VENDOR - default "amcc" - -config SYS_CONFIG_NAME - default "walnut" - -endif diff --git a/board/amcc/walnut/MAINTAINERS b/board/amcc/walnut/MAINTAINERS deleted file mode 100644 index 2a98c85..0000000 --- a/board/amcc/walnut/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -WALNUT BOARD -M: Stefan Roese <sr(a)denx.de> -S: Maintained -F: board/amcc/walnut/ -F: include/configs/walnut.h -F: configs/sycamore_defconfig -F: configs/walnut_defconfig diff --git a/board/amcc/walnut/Makefile b/board/amcc/walnut/Makefile deleted file mode 100644 index 9228170..0000000 --- a/board/amcc/walnut/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = walnut.o flash.o diff --git a/board/amcc/walnut/flash.c b/board/amcc/walnut/flash.c deleted file mode 100644 index cc0f425..0000000 --- a/board/amcc/walnut/flash.c +++ /dev/null @@ -1,183 +0,0 @@ -/* - * (C) Copyright 2000-2005 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Modified 4/5/2001 - * Wait for completion of each sector erase command issued - * 4/5/2001 - * Chris Hallinan - DS4.COM, Inc. - clh(a)net1plus.com - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/processor.h> - -#undef DEBUG -#ifdef DEBUG -#define DEBUGF(x...) printf(x) -#else -#define DEBUGF(x...) -#endif /* DEBUG */ - -/* - * include common flash code (for amcc boards) - */ -#include "../common/flash.c" - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(vu_long * addr, flash_info_t * info); -static void flash_get_offsets(ulong base, flash_info_t * info); - -unsigned long flash_init(void) -{ - unsigned long size_b0, size_b1; - int i; - uint pbcr; - unsigned long base_b0, base_b1; - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - - size_b0 = - flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0 << 20); - } - - /* Only one bank */ - if (CONFIG_SYS_MAX_FLASH_BANKS == 1) { - /* Setup offsets */ - flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]); - - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1, - &flash_info[0]); -#ifdef CONFIG_ENV_IS_IN_FLASH - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); -#endif - - size_b1 = 0; - flash_info[0].size = size_b0; - } else { - /* 2 banks */ - size_b1 = - flash_get_size((vu_long *) FLASH_BASE1_PRELIM, - &flash_info[1]); - - /* Re-do sizing to get full correct info */ - - if (size_b1) { - mtdcr(EBC0_CFGADDR, PB0CR); - pbcr = mfdcr(EBC0_CFGDATA); - mtdcr(EBC0_CFGADDR, PB0CR); - base_b1 = -size_b1; - pbcr = - (pbcr & 0x0001ffff) | base_b1 | - (((size_b1 / 1024 / 1024) - 1) << 17); - mtdcr(EBC0_CFGDATA, pbcr); - /* printf("PB1CR = %x\n", pbcr); */ - } - - if (size_b0) { - mtdcr(EBC0_CFGADDR, PB1CR); - pbcr = mfdcr(EBC0_CFGDATA); - mtdcr(EBC0_CFGADDR, PB1CR); - base_b0 = base_b1 - size_b0; - pbcr = - (pbcr & 0x0001ffff) | base_b0 | - (((size_b0 / 1024 / 1024) - 1) << 17); - mtdcr(EBC0_CFGDATA, pbcr); - /* printf("PB0CR = %x\n", pbcr); */ - } - - size_b0 = flash_get_size((vu_long *) base_b0, &flash_info[0]); - - flash_get_offsets(base_b0, &flash_info[0]); - - /* monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - base_b0 + size_b0 - monitor_flash_len, - base_b0 + size_b0 - 1, &flash_info[0]); - - if (size_b1) { - /* Re-do sizing to get full correct info */ - size_b1 = - flash_get_size((vu_long *) base_b1, &flash_info[1]); - - flash_get_offsets(base_b1, &flash_info[1]); - - /* monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - base_b1 + size_b1 - - monitor_flash_len, - base_b1 + size_b1 - 1, - &flash_info[1]); - /* monitor protection OFF by default (one is enough) */ - (void)flash_protect(FLAG_PROTECT_CLEAR, - base_b0 + size_b0 - - monitor_flash_len, - base_b0 + size_b0 - 1, - &flash_info[0]); - } else { - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[1].sector_count = -1; - } - - flash_info[0].size = size_b0; - flash_info[1].size = size_b1; - } /* else 2 banks */ - return (size_b0 + size_b1); -} - - -static void flash_get_offsets(ulong base, flash_info_t * info) -{ - int i; - - /* set up sector start address table */ - if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || - (info->flash_id == FLASH_AM040)) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000); - } else { - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = - base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - } -} diff --git a/board/amcc/walnut/walnut.c b/board/amcc/walnut/walnut.c deleted file mode 100644 index c948209..0000000 --- a/board/amcc/walnut/walnut.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * (C) Copyright 2000-2005 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/processor.h> -#include <spd_sdram.h> - -int board_early_init_f(void) -{ - /*-------------------------------------------------------------------------+ - | Interrupt controller setup for the Walnut/Sycamore board. - | Note: IRQ 0-15 405GP internally generated; active high; level sensitive - | IRQ 16 405GP internally generated; active low; level sensitive - | IRQ 17-24 RESERVED - | IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive - | IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive - | IRQ 27 (EXT IRQ 2) Not Used - | IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive - | IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive - | IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive - | IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive - | Note for Walnut board: - | An interrupt taken for the FPGA (IRQ 25) indicates that either - | the Mouse, Keyboard, IRDA, or External Expansion caused the - | interrupt. The FPGA must be read to determine which device - | caused the interrupt. The default setting of the FPGA clears - | - +-------------------------------------------------------------------------*/ - - mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ - mtdcr(UIC0ER, 0x00000000); /* disable all ints */ - mtdcr(UIC0CR, 0x00000020); /* set all but FPGA SMI to be non-critical */ - mtdcr(UIC0PR, 0xFFFFFFE0); /* set int polarities */ - mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ - mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ - mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ - - /* set UART1 control to select CTS/RTS */ -#define FPGA_BRDC 0xF0300004 - *(volatile char *)(FPGA_BRDC) |= 0x1; - - return 0; -} - -/* - * Check Board Identity: - */ -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - uint pvr = get_pvr(); - - if (pvr == PVR_405GPR_RB) { - puts("Board: Sycamore - AMCC PPC405GPr Evaluation Board"); - } else { - puts("Board: Walnut - AMCC PPC405GP Evaluation Board"); - } - - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - return (0); -} - -/* - * initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of - * the necessary info for SDRAM controller configuration - */ -phys_size_t initdram(int board_type) -{ - return spd_sdram(); -} diff --git a/board/amcc/yosemite/Kconfig b/board/amcc/yosemite/Kconfig deleted file mode 100644 index dfa1068..0000000 --- a/board/amcc/yosemite/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_YOSEMITE - -config SYS_BOARD - default "yosemite" - -config SYS_VENDOR - default "amcc" - -config SYS_CONFIG_NAME - default "yosemite" - -endif diff --git a/board/amcc/yosemite/MAINTAINERS b/board/amcc/yosemite/MAINTAINERS deleted file mode 100644 index 3f553e1..0000000 --- a/board/amcc/yosemite/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -YOSEMITE BOARD -M: Stefan Roese <sr(a)denx.de> -S: Maintained -F: board/amcc/yosemite/ -F: include/configs/yosemite.h -F: configs/yellowstone_defconfig -F: configs/yosemite_defconfig diff --git a/board/amcc/yosemite/Makefile b/board/amcc/yosemite/Makefile deleted file mode 100644 index daf020a..0000000 --- a/board/amcc/yosemite/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2002-2006 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = yosemite.o -extra-y += init.o diff --git a/board/amcc/yosemite/config.mk b/board/amcc/yosemite/config.mk deleted file mode 100644 index f18b097..0000000 --- a/board/amcc/yosemite/config.mk +++ /dev/null @@ -1,16 +0,0 @@ -# -# (C) Copyright 2002 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif diff --git a/board/amcc/yosemite/init.S b/board/amcc/yosemite/init.S deleted file mode 100644 index 529cc65..0000000 --- a/board/amcc/yosemite/init.S +++ /dev/null @@ -1,49 +0,0 @@ -/* - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <asm-offsets.h> -#include <ppc_asm.tmpl> -#include <asm/mmu.h> -#include <config.h> - -/************************************************************************** - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - *************************************************************************/ - - .section .bootpg,"ax" - .globl tlbtab - -tlbtab: - tlbtab_start - - /* - * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the - * speed up boot process. It is patched after relocation to enable SA_I - */ - tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 0, AC_RWX | SA_G/*|SA_I*/) - - /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G ) - - tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_IG ) - tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, CONFIG_SYS_PCI_BASE, 0, AC_RW | SA_IG ) - tlbentry( CONFIG_SYS_NVRAM_BASE_ADDR, SZ_256M, CONFIG_SYS_NVRAM_BASE_ADDR, 0, AC_RWX | SA_W|SA_I ) - - /* PCI */ - tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 0, AC_RW | SA_IG ) - tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 0, AC_RW | SA_IG ) - tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 0, AC_RW | SA_IG ) - tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 0, AC_RW | SA_IG ) - - /* USB 2.0 Device */ - tlbentry( CONFIG_SYS_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_RW | SA_IG ) - - tlbtab_end diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c deleted file mode 100644 index 56b5191..0000000 --- a/board/amcc/yosemite/yosemite.c +++ /dev/null @@ -1,357 +0,0 @@ -/* - * (C) Copyright 2006-2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <spd_sdram.h> -#include <libfdt.h> -#include <fdt_support.h> - -DECLARE_GLOBAL_DATA_PTR; - -extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -static inline u32 get_async_pci_freq(void) -{ - if (in_8((void *)(CONFIG_SYS_BCSR_BASE + 5)) & - CONFIG_SYS_BCSR5_PCI66EN) - return 66666666; - else - return 33333333; -} - -int board_early_init_f(void) -{ - register uint reg; - - /*-------------------------------------------------------------------- - * Setup the external bus controller/chip selects - *-------------------------------------------------------------------*/ - mtdcr(EBC0_CFGADDR, EBC0_CFG); - reg = mfdcr(EBC0_CFGDATA); - mtdcr(EBC0_CFGDATA, reg | 0x04000000); /* Set ATC */ - - /*-------------------------------------------------------------------- - * Setup the GPIO pins - *-------------------------------------------------------------------*/ - /*CPLD cs */ - /*setup Address lines for flash size 64Meg. */ - out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x50010000); - out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x50010000); - out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x50000000); - - /*setup emac */ - out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080); - out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40); - out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55); - out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000); - out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000); - - /*UART1 */ - out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x02000000); - out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x00080000); - out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x00010000); - - /* external interrupts IRQ0...3 */ - out32(GPIO1_TCR, in32(GPIO1_TCR) & ~0x00f00000); - out32(GPIO1_TSRL, in32(GPIO1_TSRL) & ~0x0000ff00); - out32(GPIO1_ISR1L, in32(GPIO1_ISR1L) | 0x00005500); - -#ifdef CONFIG_440EP - /*setup USB 2.0 */ - out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000); - out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000); - out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf); - out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa); - out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500); -#endif - - /*-------------------------------------------------------------------- - * Setup the interrupt controller polarities, triggers, etc. - *-------------------------------------------------------------------*/ - mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(UIC0ER, 0x00000000); /* disable all */ - mtdcr(UIC0CR, 0x00000009); /* ATI & UIC1 crit are critical */ - mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */ - mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */ - mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(UIC0SR, 0xffffffff); /* clear all */ - - mtdcr(UIC1SR, 0xffffffff); /* clear all */ - mtdcr(UIC1ER, 0x00000000); /* disable all */ - mtdcr(UIC1CR, 0x00000000); /* all non-critical */ - mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */ - mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */ - mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(UIC1SR, 0xffffffff); /* clear all */ - - /*-------------------------------------------------------------------- - * Setup other serial configuration - *-------------------------------------------------------------------*/ - mfsdr(SDR0_PCI0, reg); - mtsdr(SDR0_PCI0, 0x80000000 | reg); /* PCI arbiter enabled */ - mtsdr(SDR0_PFC0, 0x00003e00); /* Pin function */ - mtsdr(SDR0_PFC1, 0x00048000); /* Pin function: UART0 has 4 pins */ - - /* Check and reconfigure the PCI sync clock if necessary */ - ppc4xx_pci_sync_clock_config(get_async_pci_freq()); - - /*clear tmrclk divisor */ - *(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x04) = 0x00; - - /*enable ethernet */ - *(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x08) = 0xf0; - -#ifdef CONFIG_440EP - /*enable usb 1.1 fs device and remove usb 2.0 reset */ - *(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x09) = 0x00; -#endif - - /*get rid of flash write protect */ - *(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x07) = 0x00; - - return 0; -} - -int misc_init_r (void) -{ - uint pbcr; - int size_val = 0; - - /* Re-do sizing to get full correct info */ - mtdcr(EBC0_CFGADDR, PB0CR); - pbcr = mfdcr(EBC0_CFGDATA); - switch (gd->bd->bi_flashsize) { - case 1 << 20: - size_val = 0; - break; - case 2 << 20: - size_val = 1; - break; - case 4 << 20: - size_val = 2; - break; - case 8 << 20: - size_val = 3; - break; - case 16 << 20: - size_val = 4; - break; - case 32 << 20: - size_val = 5; - break; - case 64 << 20: - size_val = 6; - break; - case 128 << 20: - size_val = 7; - break; - } - pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); - mtdcr(EBC0_CFGADDR, PB0CR); - mtdcr(EBC0_CFGDATA, pbcr); - - /* adjust flash start and offset */ - gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; - gd->bd->bi_flashoffset = 0; - - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - -CONFIG_SYS_MONITOR_LEN, - 0xffffffff, - &flash_info[0]); - - return 0; -} - -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - u8 rev; - u32 clock = get_async_pci_freq(); - -#ifdef CONFIG_440EP - printf("Board: Yosemite - AMCC PPC440EP Evaluation Board"); -#else - printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board"); -#endif - - rev = in_8((void *)(CONFIG_SYS_BCSR_BASE + 0)); - printf(", Rev. %X, PCI-Async=%d MHz", rev, clock / 1000000); - - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - /* - * Reconfiguration of the PCI sync clock is already done, - * now check again if everything is in range: - */ - if (ppc4xx_pci_sync_clock_config(clock)) { - printf("ERROR: PCI clocking incorrect (async=%d " - "sync=%ld)!\n", clock, get_PCI_freq()); - } - - return (0); -} - -/************************************************************************* - * initdram -- doesn't use serial presence detect. - * - * Assumes: 256 MB, ECC, non-registered - * PLB @ 133 MHz - * - ************************************************************************/ -#define NUM_TRIES 64 -#define NUM_READS 10 - -void sdram_tr1_set(int ram_address, int* tr1_value) -{ - int i; - int j, k; - volatile unsigned int* ram_pointer = (unsigned int*)ram_address; - int first_good = -1, last_bad = 0x1ff; - - unsigned long test[NUM_TRIES] = { - 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, - 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, - 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, - 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, - 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, - 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, - 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, - 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, - 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, - 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, - 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, - 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, - 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, - 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, - 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, - 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 }; - - /* go through all possible SDRAM0_TR1[RDCT] values */ - for (i=0; i<=0x1ff; i++) { - /* set the current value for TR1 */ - mtsdram(SDRAM0_TR1, (0x80800800 | i)); - - /* write values */ - for (j=0; j<NUM_TRIES; j++) { - ram_pointer[j] = test[j]; - - /* clear any cache at ram location */ - __asm__("dcbf 0,%0": :"r" (&ram_pointer[j])); - } - - /* read values back */ - for (j=0; j<NUM_TRIES; j++) { - for (k=0; k<NUM_READS; k++) { - /* clear any cache at ram location */ - __asm__("dcbf 0,%0": :"r" (&ram_pointer[j])); - - if (ram_pointer[j] != test[j]) - break; - } - - /* read error */ - if (k != NUM_READS) { - break; - } - } - - /* we have a SDRAM0_TR1[RDCT] that is part of the window */ - if (j == NUM_TRIES) { - if (first_good == -1) - first_good = i; /* found beginning of window */ - } else { /* bad read */ - /* if we have not had a good read then don't care */ - if(first_good != -1) { - /* first failure after a good read */ - last_bad = i-1; - break; - } - } - } - - /* return the current value for TR1 */ - *tr1_value = (first_good + last_bad) / 2; -} - -phys_size_t initdram(int board) -{ - register uint reg; - int tr1_bank1, tr1_bank2; - - /*-------------------------------------------------------------------- - * Setup some default - *------------------------------------------------------------------*/ - mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */ - mtsdram(SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ - mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */ - mtsdram(SDRAM0_CLKTR, 0x40000000); /* ?? */ - mtsdram(SDRAM0_WDDCTR, 0x40000000); /* ?? */ - - /*clear this first, if the DDR is enabled by a debugger - then you can not make changes. */ - mtsdram(SDRAM0_CFG0, 0x00000000); /* Disable EEC */ - - /*-------------------------------------------------------------------- - * Setup for board-specific specific mem - *------------------------------------------------------------------*/ - /* - * Following for CAS Latency = 2.5 @ 133 MHz PLB - */ - mtsdram(SDRAM0_B0CR, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */ - mtsdram(SDRAM0_B1CR, 0x080a4001); /* SDBA=0x080 128MB, Mode 3, enabled */ - - mtsdram(SDRAM0_TR0, 0x410a4012); /* ?? */ - mtsdram(SDRAM0_RTR, 0x04080000); /* ?? */ - mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM */ - mtsdram(SDRAM0_CFG0, 0x30000000); /* Disable EEC */ - udelay(400); /* Delay 200 usecs (min) */ - - /*-------------------------------------------------------------------- - * Enable the controller, then wait for DCEN to complete - *------------------------------------------------------------------*/ - mtsdram(SDRAM0_CFG0, 0x80000000); /* Enable */ - - for (;;) { - mfsdram(SDRAM0_MCSTS, reg); - if (reg & 0x80000000) - break; - } - - sdram_tr1_set(0x00000000, &tr1_bank1); - sdram_tr1_set(0x08000000, &tr1_bank2); - mtsdram(SDRAM0_TR1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800)); - - return CONFIG_SYS_SDRAM_BANKS * (CONFIG_SYS_KBYTES_SDRAM * 1024); /* return bytes */ -} - -/************************************************************************* - * hw_watchdog_reset - * - * This routine is called to reset (keep alive) the watchdog timer - * - ************************************************************************/ -#if defined(CONFIG_HW_WATCHDOG) -void hw_watchdog_reset(void) -{ - -} -#endif - -void board_reset(void) -{ - /* give reset to BCSR */ - *(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x06) = 0x09; -} diff --git a/board/amcc/yucca/Kconfig b/board/amcc/yucca/Kconfig deleted file mode 100644 index 61d9589..0000000 --- a/board/amcc/yucca/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_YUCCA - -config SYS_BOARD - default "yucca" - -config SYS_VENDOR - default "amcc" - -config SYS_CONFIG_NAME - default "yucca" - -endif diff --git a/board/amcc/yucca/MAINTAINERS b/board/amcc/yucca/MAINTAINERS deleted file mode 100644 index 1cbdb0e..0000000 --- a/board/amcc/yucca/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -YUCCA BOARD -#M: - -S: Maintained -F: board/amcc/yucca/ -F: include/configs/yucca.h -F: configs/yucca_defconfig diff --git a/board/amcc/yucca/Makefile b/board/amcc/yucca/Makefile deleted file mode 100644 index 5b1af32..0000000 --- a/board/amcc/yucca/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = yucca.o flash.o cmd_yucca.o -extra-y += init.o diff --git a/board/amcc/yucca/cmd_yucca.c b/board/amcc/yucca/cmd_yucca.c deleted file mode 100644 index c1724bf..0000000 --- a/board/amcc/yucca/cmd_yucca.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * (C) Copyright 2001 - * Denis Peter, MPL AG Switzerland, d.peter(a)mpl.ch - * - * SPDX-License-Identifier: GPL-2.0+ - * - * hacked for evb440spe - */ - -#include <common.h> -#include <cli.h> -#include <command.h> -#include "yucca.h" -#include <i2c.h> -#include <asm/byteorder.h> - -extern void print_evb440spe_info(void); -static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, - int flag, int argc, char * const argv[]); - -/* ------------------------------------------------------------------------- */ -int do_evb440spe(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - return setBootStrapClock (cmdtp, 1, flag, argc, argv); -} - -/* ------------------------------------------------------------------------- */ -/* Modify memory. - * - * Syntax: - * evb440spe wrclk prom0,prom1 - */ -static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag, - int argc, char * const argv[]) -{ - uchar chip; - ulong data; - int nbytes; - - char sysClock[4]; - char cpuClock[4]; - char plbClock[4]; - char pcixClock[4]; - - if (argc < 3) - return cmd_usage(cmdtp); - - if (strcmp(argv[2], "prom0") == 0) - chip = IIC0_BOOTPROM_ADDR; - else - chip = IIC0_ALT_BOOTPROM_ADDR; - - do { - printf("enter sys clock frequency 33 or 66 MHz or quit to abort\n"); - nbytes = cli_readline(" ? "); - - if (strcmp(console_buffer, "quit") == 0) - return 0; - - if ((strcmp(console_buffer, "33") != 0) & - (strcmp(console_buffer, "66") != 0)) - nbytes=0; - - strcpy(sysClock, console_buffer); - - } while (nbytes == 0); - - do { - if (strcmp(sysClock, "66") == 0) { - printf("enter cpu clock frequency 400, 533 MHz or quit to abort\n"); - } else { -#ifdef CONFIG_STRESS - printf("enter cpu clock frequency 400, 500, 533, 667 MHz or quit to abort\n"); -#else - printf("enter cpu clock frequency 400, 500, 533 MHz or quit to abort\n"); -#endif - } - nbytes = cli_readline(" ? "); - - if (strcmp(console_buffer, "quit") == 0) - return 0; - - if (strcmp(sysClock, "66") == 0) { - if ((strcmp(console_buffer, "400") != 0) & - (strcmp(console_buffer, "533") != 0) -#ifdef CONFIG_STRESS - & (strcmp(console_buffer, "667") != 0) -#endif - ) { - nbytes = 0; - } - } else { - if ((strcmp(console_buffer, "400") != 0) & - (strcmp(console_buffer, "500") != 0) & - (strcmp(console_buffer, "533") != 0) -#ifdef CONFIG_STRESS - & (strcmp(console_buffer, "667") != 0) -#endif - ) { - nbytes = 0; - } - } - - strcpy(cpuClock, console_buffer); - - } while (nbytes == 0); - - if (strcmp(cpuClock, "500") == 0){ - strcpy(plbClock, "166"); - } else if (strcmp(cpuClock, "533") == 0){ - strcpy(plbClock, "133"); - } else { - do { - if (strcmp(cpuClock, "400") == 0) - printf("enter plb clock frequency 100, 133 MHz or quit to abort\n"); - -#ifdef CONFIG_STRESS - if (strcmp(cpuClock, "667") == 0) - printf("enter plb clock frequency 133, 166 MHz or quit to abort\n"); - -#endif - nbytes = cli_readline(" ? "); - - if (strcmp(console_buffer, "quit") == 0) - return 0; - - if (strcmp(cpuClock, "400") == 0) { - if ((strcmp(console_buffer, "100") != 0) & - (strcmp(console_buffer, "133") != 0)) - nbytes = 0; - } -#ifdef CONFIG_STRESS - if (strcmp(cpuClock, "667") == 0) { - if ((strcmp(console_buffer, "133") != 0) & - (strcmp(console_buffer, "166") != 0)) - nbytes = 0; - } -#endif - strcpy(plbClock, console_buffer); - - } while (nbytes == 0); - } - - do { - printf("enter Pci-X clock frequency 33, 66, 100 or 133 MHz or quit to abort\n"); - nbytes = cli_readline(" ? "); - - if (strcmp(console_buffer, "quit") == 0) - return 0; - - if ((strcmp(console_buffer, "33") != 0) & - (strcmp(console_buffer, "66") != 0) & - (strcmp(console_buffer, "100") != 0) & - (strcmp(console_buffer, "133") != 0)) { - nbytes = 0; - } - strcpy(pcixClock, console_buffer); - - } while (nbytes == 0); - - printf("\nsys clk = %s MHz\n", sysClock); - printf("cpu clk = %s MHz\n", cpuClock); - printf("plb clk = %s MHz\n", plbClock); - printf("Pci-X clk = %s MHz\n", pcixClock); - - do { - printf("\npress [y] to write I2C bootstrap\n"); - printf("or [n] to abort.\n"); - printf("Don't forget to set board switches\n"); - printf("according to your choice before re-starting\n"); - printf("(refer to 440spe_uboot_kit_um_1_01.pdf)\n"); - - nbytes = cli_readline(" ? "); - if (strcmp(console_buffer, "n") == 0) - return 0; - - } while (nbytes == 0); - - if (strcmp(sysClock, "33") == 0) { - if ((strcmp(cpuClock, "400") == 0) & - (strcmp(plbClock, "100") == 0)) - data = 0x8678c206; - - if ((strcmp(cpuClock, "400") == 0) & - (strcmp(plbClock, "133") == 0)) - data = 0x8678c2c6; - - if ((strcmp(cpuClock, "500") == 0)) - data = 0x8778f2c6; - - if ((strcmp(cpuClock, "533") == 0)) - data = 0x87790252; - -#ifdef CONFIG_STRESS - if ((strcmp(cpuClock, "667") == 0) & - (strcmp(plbClock, "133") == 0)) - data = 0x87794256; - - if ((strcmp(cpuClock, "667") == 0) & - (strcmp(plbClock, "166") == 0)) - data = 0x87794206; - -#endif - } - if (strcmp(sysClock, "66") == 0) { - if ((strcmp(cpuClock, "400") == 0) & - (strcmp(plbClock, "100") == 0)) - data = 0x84706206; - - if ((strcmp(cpuClock, "400") == 0) & - (strcmp(plbClock, "133") == 0)) - data = 0x847062c6; - - if ((strcmp(cpuClock, "533") == 0)) - data = 0x85708206; - -#ifdef CONFIG_STRESS - if ((strcmp(cpuClock, "667") == 0) & - (strcmp(plbClock, "133") == 0)) - data = 0x8570a256; - - if ((strcmp(cpuClock, "667") == 0) & - (strcmp(plbClock, "166") == 0)) - data = 0x8570a206; - -#endif - } - -#ifdef DEBUG - printf(" pin strap0 to write in i2c = %x\n", data); -#endif /* DEBUG */ - - if (i2c_write(chip, 0, 1, (uchar *)&data, 4) != 0) - printf("Error writing strap0 in %s\n", argv[2]); - - if (strcmp(pcixClock, "33") == 0) - data = 0x00000701; - - if (strcmp(pcixClock, "66") == 0) - data = 0x00000601; - - if (strcmp(pcixClock, "100") == 0) - data = 0x00000501; - - if (strcmp(pcixClock, "133") == 0) - data = 0x00000401; - - if (strcmp(plbClock, "166") == 0) - data = data | 0x05950000; - else - data = data | 0x05A50000; - -#ifdef DEBUG - printf(" pin strap1 to write in i2c = %x\n", data); -#endif /* DEBUG */ - - udelay(1000); - if (i2c_write(chip, 4, 1, (uchar *)&data, 4) != 0) - printf("Error writing strap1 in %s\n", argv[2]); - - return 0; -} - -U_BOOT_CMD( - evb440spe, 3, 1, do_evb440spe, - "program the serial device strap", - "wrclk [prom0|prom1] - program the serial device strap" -); diff --git a/board/amcc/yucca/config.mk b/board/amcc/yucca/config.mk deleted file mode 100644 index 05a4162..0000000 --- a/board/amcc/yucca/config.mk +++ /dev/null @@ -1,26 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# AMCC 440SPe Reference Platform (yucca) board -# - -ifeq ($(ramsym),1) -CONFIG_SYS_TEXT_BASE = 0x07FD0000 -else -CONFIG_SYS_TEXT_BASE = 0xfffb0000 -endif - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif diff --git a/board/amcc/yucca/flash.c b/board/amcc/yucca/flash.c deleted file mode 100644 index b1fd657..0000000 --- a/board/amcc/yucca/flash.c +++ /dev/null @@ -1,1033 +0,0 @@ -/* - * (C) Copyright 2006 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * (C) Copyright 2002 Jun Gu <jung(a)artesyncp.com> - * Add support for Am29F016D and dynamic switch setting. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Modified 4/5/2001 - * Wait for completion of each sector erase command issued - * 4/5/2001 - * Chris Hallinan - DS4.COM, Inc. - clh(a)net1plus.com - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/processor.h> -#include <asm/ppc440.h> -#include "yucca.h" - -#ifdef DEBUG -#define DEBUGF(x...) printf(x) -#else -#define DEBUGF(x...) -#endif /* DEBUG */ - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* - * Mark big flash bank (16 bit instead of 8 bit access) in address with bit 0 - */ -static unsigned long flash_addr_table[][CONFIG_SYS_MAX_FLASH_BANKS] = { - {0xfff00000, 0xfff80000, 0xe7c00001}, /* 0:boot from small flash */ - {0x00000000, 0x00000000, 0x00000000}, /* 1:boot from pci 66 */ - {0x00000000, 0x00000000, 0x00000000}, /* 2:boot from nand flash */ - {0xe7F00000, 0xe7F80000, 0xFFC00001}, /* 3:boot from big flash 33*/ - {0xe7F00000, 0xe7F80000, 0xFFC00001}, /* 4:boot from big flash 66*/ - {0x00000000, 0x00000000, 0x00000000}, /* 5:boot from */ - {0x00000000, 0x00000000, 0x00000000}, /* 6:boot from pci 66 */ - {0x00000000, 0x00000000, 0x00000000}, /* 7:boot from */ - {0xfff00000, 0xfff80000, 0xe7c00001}, /* 8:boot from small flash */ -}; - -/* - * include common flash code (for amcc boards) - */ -/*----------------------------------------------------------------------- - * Functions - */ -static int write_word(flash_info_t * info, ulong dest, ulong data); -#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV -static int write_word_1(flash_info_t * info, ulong dest, ulong data); -static int write_word_2(flash_info_t * info, ulong dest, ulong data); -static int flash_erase_1(flash_info_t * info, int s_first, int s_last); -static int flash_erase_2(flash_info_t * info, int s_first, int s_last); -static ulong flash_get_size_1(vu_long * addr, flash_info_t * info); -static ulong flash_get_size_2(vu_long * addr, flash_info_t * info); -#endif - -void flash_print_info(flash_info_t * info) -{ - int i; - int k; - int size; - int erased; - volatile unsigned long *flash; - - if (info->flash_id == FLASH_UNKNOWN) { - printf("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - printf("AMD "); - break; - case FLASH_MAN_STM: - printf("STM "); - break; - case FLASH_MAN_FUJ: - printf("FUJITSU "); - break; - case FLASH_MAN_SST: - printf("SST "); - break; - case FLASH_MAN_MX: - printf("MIXC "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: - printf("AM29F040 (512 Kbit, uniform sector size)\n"); - break; - case FLASH_AM400B: - printf("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: - printf("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: - printf("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: - printf("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AMD016: - printf("AM29F016D (16 Mbit, uniform sector size)\n"); - break; - case FLASH_AM160B: - printf("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: - printf("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: - printf("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: - printf("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - case FLASH_AM033C: - printf("AM29LV033C (32 Mbit, top boot sector)\n"); - break; - case FLASH_SST800A: - printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n"); - break; - case FLASH_SST160A: - printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n"); - break; - case FLASH_STMW320DT: - printf ("M29W320DT (32 M, top sector)\n"); - break; - case FLASH_MXLV320T: - printf ("MXLV320T (32 Mbit, top sector)\n"); - break; - default: - printf("Unknown Chip Type\n"); - break; - } - - printf(" Size: %ld KB in %d Sectors\n", - info->size >> 10, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - /* - * Check if whole sector is erased - */ - if (i != (info->sector_count - 1)) - size = info->start[i + 1] - info->start[i]; - else - size = info->start[0] + info->size - info->start[i]; - erased = 1; - flash = (volatile unsigned long *)info->start[i]; - size = size >> 2; /* divide by 4 for longword access */ - for (k = 0; k < size; k++) { - if (*flash++ != 0xffffffff) { - erased = 0; - break; - } - } - - if ((i % 5) == 0) - printf("\n "); - printf(" %08lX%s%s", - info->start[i], - erased ? " E" : " ", - info->protect[i] ? "RO " : " "); - } - printf("\n"); - return; -} - - -/* - * The following code cannot be run from FLASH! - */ -#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV -static ulong flash_get_size(vu_long * addr, flash_info_t * info) -{ - /* bit 0 used for big flash marking */ - if ((ulong)addr & 0x1) - return flash_get_size_2((vu_long *)((ulong)addr & 0xfffffffe), info); - else - return flash_get_size_1(addr, info); -} - -static ulong flash_get_size_1(vu_long * addr, flash_info_t * info) -#else -static ulong flash_get_size(vu_long * addr, flash_info_t * info) -#endif -{ - short i; - CONFIG_SYS_FLASH_WORD_SIZE value; - ulong base = (ulong) addr; - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr; - - DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr); - - /* Write auto select command: read Manufacturer ID */ - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090; - udelay(1000); - - value = addr2[0]; - DEBUGF("FLASH MANUFACT: %x\n", value); - - switch (value) { - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - case (CONFIG_SYS_FLASH_WORD_SIZE) SST_MANUFACT: - info->flash_id = FLASH_MAN_SST; - break; - case (CONFIG_SYS_FLASH_WORD_SIZE) STM_MANUFACT: - info->flash_id = FLASH_MAN_STM; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr2[1]; /* device ID */ - DEBUGF("\nFLASH DEVICEID: %x\n", value); - - switch (value) { - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ - break; - - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ - break; - - case (CONFIG_SYS_FLASH_WORD_SIZE) STM_ID_M29W040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ - break; - - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F016D: - info->flash_id += FLASH_AMD016; - info->sector_count = 32; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV033C: - info->flash_id += FLASH_AMDLV033C; - info->sector_count = 64; - info->size = 0x00400000; - break; /* => 4 MB */ - - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400T: - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 0.5 MB */ - - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400B: - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 0.5 MB */ - - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - } - - /* set up sector start address table */ - if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000); - } else { - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = - base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]); - - /* For AMD29033C flash we need to resend the command of * - * reading flash protection for upper 8 Mb of flash */ - if (i == 32) { - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA; - addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555; - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) - info->protect[i] = 0; - else - info->protect[i] = addr2[2] & 1; - } - - /* issue bank reset to return to read mode */ - addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0; - - return (info->size); -} - -static int wait_for_DQ7_1(flash_info_t * info, int sect) -{ - ulong start, now, last; - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = - (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]); - - start = get_timer(0); - last = start; - while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) != - (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - return -1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc('.'); - last = now; - } - } - return 0; -} - -#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV -int flash_erase(flash_info_t * info, int s_first, int s_last) -{ - if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) { - return flash_erase_2(info, s_first, s_last); - } else { - return flash_erase_1(info, s_first, s_last); - } -} - -static int flash_erase_1(flash_info_t * info, int s_first, int s_last) -#else -int flash_erase(flash_info_t * info, int s_first, int s_last) -#endif -{ - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]); - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2; - int flag, prot, sect; - int i; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) - printf("- missing\n"); - else - printf("- no sectors to erase\n"); - return 1; - } - - if (info->flash_id == FLASH_UNKNOWN) { - printf("Can't erase unknown flash type - aborted\n"); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) - prot++; - } - - if (prot) - printf("- Warning: %d protected sectors will not be erased!", prot); - - printf("\n"); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]); - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080; - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00500050; /* block erase */ - for (i = 0; i < 50; i++) - udelay(1000); /* wait 1 ms */ - } else { - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080; - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030; /* sector erase */ - } - /* - * Wait for each sector to complete, it's more - * reliable. According to AMD Spec, you must - * issue all erase commands within a specified - * timeout. This has been seen to fail, especially - * if printf()s are included (for debug)!! - */ - wait_for_DQ7_1(info, sect); - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay(1000); - - /* reset to read mode */ - addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0]; - addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ - - printf(" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) - data = (data << 8) | (*(uchar *) cp); - - for (; i < 4 && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - - for (; cnt == 0 && i < 4; ++i, ++cp) - data = (data << 8) | (*(uchar *) cp); - - if ((rc = write_word(info, wp, data)) != 0) - return (rc); - - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i = 0; i < 4; ++i) - data = (data << 8) | *src++; - - if ((rc = write_word(info, wp, data)) != 0) - return (rc); - - wp += 4; - cnt -= 4; - } - - if (cnt == 0) - return (0); - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < 4; ++i, ++cp) - data = (data << 8) | (*(uchar *) cp); - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV -static int write_word(flash_info_t * info, ulong dest, ulong data) -{ - if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) { - return write_word_2(info, dest, data); - } else { - return write_word_1(info, dest, data); - } -} - -static int write_word_1(flash_info_t * info, ulong dest, ulong data) -#else -static int write_word(flash_info_t * info, ulong dest, ulong data) -#endif -{ - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]); - volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest; - volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) & data; - ulong start; - int i, flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) - return (2); - - for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) { - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0; - - dest2[i] = data2[i]; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer(0); - while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) != - (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) { - - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) - return (1); - } - } - - return (0); -} - -#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV - -#undef CONFIG_SYS_FLASH_WORD_SIZE -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size_2(vu_long * addr, flash_info_t * info) -{ - short i; - int n; - CONFIG_SYS_FLASH_WORD_SIZE value; - ulong base = (ulong) addr; - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr; - - DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr); - - /* issue bank reset to return to read mode */ - addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0; - /* Write auto select command: read Manufacturer ID */ - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090; - udelay(1000); - - value = addr2[0]; - DEBUGF("FLASH MANUFACT: %x\n", value); - - switch (value) { - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - case (CONFIG_SYS_FLASH_WORD_SIZE) SST_MANUFACT: - info->flash_id = FLASH_MAN_SST; - break; - case (CONFIG_SYS_FLASH_WORD_SIZE) STM_MANUFACT: - info->flash_id = FLASH_MAN_STM; - break; - case (CONFIG_SYS_FLASH_WORD_SIZE) MX_MANUFACT: - info->flash_id = FLASH_MAN_MX; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr2[1]; /* device ID */ - DEBUGF("\nFLASH DEVICEID: %x\n", value); - - switch (value) { - case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320T: - info->flash_id += FLASH_AM320T; - info->sector_count = 71; - info->size = 0x00400000; - break; /* => 4 MB */ - case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320B: - info->flash_id += FLASH_AM320B; - info->sector_count = 71; - info->size = 0x00400000; - break; /* => 4 MB */ - case (CONFIG_SYS_FLASH_WORD_SIZE)STM_ID_29W320DT: - info->flash_id += FLASH_STMW320DT; - info->sector_count = 67; - info->size = 0x00400000; - break; /* => 4 MB */ - case (CONFIG_SYS_FLASH_WORD_SIZE)MX_ID_LV320T: - info->flash_id += FLASH_MXLV320T; - info->sector_count = 71; - info->size = 0x00400000; - break; /* => 4 MB */ - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - } - - /* set up sector start address table */ - if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) || - ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000); - } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) { - /* set sector offsets for top boot block type */ - base += info->size; - i = info->sector_count; - /* 1 x 16k boot sector */ - base -= 16 << 10; - --i; - info->start[i] = base; - /* 2 x 8k boot sectors */ - for (n = 0; n < 2; ++n) { - base -= 8 << 10; - --i; - info->start[i] = base; - } - /* 1 x 32k boot sector */ - base -= 32 << 10; - --i; - info->start[i] = base; - - while (i > 0) { /* 64k regular sectors */ - base -= 64 << 10; - --i; - info->start[i] = base; - } - } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) { - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00002000; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000a000; - info->start[i--] = base + info->size - 0x0000c000; - info->start[i--] = base + info->size - 0x0000e000; - info->start[i--] = base + info->size - 0x00010000; - - for (; i >= 0; i--) - info->start[i] = base + i * 0x00010000; - } else { - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - - for (i = 4; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000) - 0x00030000; - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - - for (; i >= 0; i--) - info->start[i] = base + i * 0x00010000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]); - - /* For AMD29033C flash we need to resend the command of * - * reading flash protection for upper 8 Mb of flash */ - if (i == 32) { - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA; - addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555; - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) - info->protect[i] = 0; - else - info->protect[i] = addr2[2] & 1; - } - - /* issue bank reset to return to read mode */ - addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0; - - return (info->size); -} - -static int wait_for_DQ7_2(flash_info_t * info, int sect) -{ - ulong start, now, last; - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = - (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]); - - start = get_timer(0); - last = start; - while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) != - (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - return -1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc('.'); - last = now; - } - } - return 0; -} - -static int flash_erase_2(flash_info_t * info, int s_first, int s_last) -{ - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]); - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2; - int flag, prot, sect; - int i; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) - printf("- missing\n"); - else - printf("- no sectors to erase\n"); - return 1; - } - - if (info->flash_id == FLASH_UNKNOWN) { - printf("Can't erase unknown flash type - aborted\n"); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) - prot++; - } - - if (prot) - printf("- Warning: %d protected sectors will not be erased!", prot); - - printf("\n"); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]); - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080; - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00500050; /* block erase */ - for (i = 0; i < 50; i++) - udelay(1000); /* wait 1 ms */ - } else { - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080; - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030; /* sector erase */ - } - /* - * Wait for each sector to complete, it's more - * reliable. According to AMD Spec, you must - * issue all erase commands within a specified - * timeout. This has been seen to fail, especially - * if printf()s are included (for debug)!! - */ - wait_for_DQ7_2(info, sect); - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay(1000); - - /* reset to read mode */ - addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0]; - addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ - - printf(" done\n"); - return 0; -} - -static int write_word_2(flash_info_t * info, ulong dest, ulong data) -{ - ulong *data_ptr = &data; - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[0]); - volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *)dest; - volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *)data_ptr; - ulong start; - int i; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) - return (2); - - for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) { - int flag; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0; - - dest2[i] = data2[i]; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer(0); - while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) != - (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) { - - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) - return (1); - } - } - - return (0); -} -#endif /* CONFIG_SYS_FLASH_2ND_16BIT_DEV */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(vu_long * addr, flash_info_t * info); -static int write_word(flash_info_t * info, ulong dest, ulong data); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init(void) -{ - unsigned long total_b = 0; - unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS]; - unsigned short index = 0; - int i; - unsigned long val; - unsigned long ebc_boot_size; - unsigned long boot_selection; - - mfsdr(sdr_pstrp0, val); - index = (val & SDR0_PSTRP0_BOOTSTRAP_MASK) >> 28; - - if ((index == 0xc) || (index == 8)) { - /* - * Boot Settings in IIC EEprom address 0xA8 or 0xA0 - * Read Serial Device Strap Register1 in PPC440SPe - */ - mfsdr(SDR0_SDSTP1, val); - boot_selection = val & SDR0_SDSTP1_BOOT_SEL_MASK; - ebc_boot_size = val & SDR0_SDSTP1_EBC_ROM_BS_MASK; - - switch(boot_selection) { - case SDR0_SDSTP1_BOOT_SEL_EBC: - switch(ebc_boot_size) { - case SDR0_SDSTP1_EBC_ROM_BS_16BIT: - index = 3; - break; - case SDR0_SDSTP1_EBC_ROM_BS_8BIT: - index = 0; - break; - } - break; - - case SDR0_SDSTP1_BOOT_SEL_PCI: - index = 1; - break; - - } - } /*else if (index == 0) {*/ -/* if (in8(FPGA_SETTING_REG) & FPGA_SET_REG_OP_CODE_FLASH_ABOVE)*/ -/* index = 8;*/ /* sram below op code flash -> new index 8*/ -/* }*/ - - DEBUGF("\n"); - DEBUGF("FLASH: Index: %d\n", index); - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].sector_count = -1; - flash_info[i].size = 0; - - /* check whether the address is 0 */ - if (flash_addr_table[index][i] == 0) - continue; - - /* call flash_get_size() to initialize sector address */ - size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i], - &flash_info[i]); - - flash_info[i].size = size_b[i]; - - if (flash_info[i].flash_id == FLASH_UNKNOWN) { - printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", - i, size_b[i], size_b[i] << 20); - flash_info[i].sector_count = -1; - flash_info[i].size = 0; - } - - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1, - &flash_info[i]); -#if defined(CONFIG_ENV_IS_IN_FLASH) - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[i]); -#if defined(CONFIG_ENV_ADDR_REDUND) - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[i]); -#endif -#endif - total_b += flash_info[i].size; - } - - return total_b; -} diff --git a/board/amcc/yucca/init.S b/board/amcc/yucca/init.S deleted file mode 100644 index 7da5c0d..0000000 --- a/board/amcc/yucca/init.S +++ /dev/null @@ -1,106 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * Copyright (C) 2002 Scott McNutt <smcnutt(a)artesyncp.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <ppc_asm.tmpl> -#include <config.h> -#include <asm/mmu.h> -#include <asm/ppc4xx.h> - -/************************************************************************** - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - *************************************************************************/ - - .section .bootpg,"ax" - -/************************************************************************** - * TLB table for revA - *************************************************************************/ - .globl tlbtabA -tlbtabA: - tlbtab_start - - /* - * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the - * speed up boot process. It is patched after relocation to enable SA_I - */ - tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_RWX | SA_G) - - /* - * TLB entries for SDRAM are not needed on this platform. - * They are dynamically generated in the SPD DDR(2) detection - * routine. - */ - - tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_RWX | SA_I) - tlbentry(CONFIG_SYS_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_RW | SA_I) - - tlbentry(CONFIG_SYS_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_RWX | SA_IG) - tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_RW | SA_IG) - - tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_RW | SA_IG) - - tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_RW | SA_IG) - tlbtab_end - -/************************************************************************** - * TLB table for revB - * - * Notice: revB of the 440SPe chip is very strict about PLB real addresses - * and ranges to be mapped for config space: it seems to only work with - * d_nnnn_nnnn range (hangs the core upon config transaction attempts when - * set otherwise) while revA uses c_nnnn_nnnn. - *************************************************************************/ - .globl tlbtabB -tlbtabB: - tlbtab_start - - /* - * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the - * speed up boot process. It is patched after relocation to enable SA_I - */ - tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_RWX | SA_G) - - /* - * TLB entries for SDRAM are not needed on this platform. - * They are dynamically generated in the SPD DDR(2) detection - * routine. - */ - - tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_RWX | SA_I) - tlbentry(CONFIG_SYS_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_RW | SA_I) - - tlbentry(CONFIG_SYS_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_RWX | SA_IG) - tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_RW | SA_IG) - - tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_RW | SA_IG) - - tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_RW | SA_IG) - tlbtab_end diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c deleted file mode 100644 index c0445ef..0000000 --- a/board/amcc/yucca/yucca.c +++ /dev/null @@ -1,714 +0,0 @@ -/* - * (C) Copyright 2006 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * Port to AMCC-440SPE Evaluation Board SOP - April 2005 - * - * PCIe supporting routines derived from Linux 440SPe PCIe driver. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <i2c.h> -#include <netdev.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/4xx_pcie.h> -#include <asm/errno.h> - -#include "yucca.h" - -DECLARE_GLOBAL_DATA_PTR; - -void fpga_init (void); - -#define DEBUG_ENV -#ifdef DEBUG_ENV -#define DEBUGF(fmt,args...) printf(fmt ,##args) -#else -#define DEBUGF(fmt,args...) -#endif - -int board_early_init_f (void) -{ -/*----------------------------------------------------------------------------+ -| Define Boot devices -+----------------------------------------------------------------------------*/ -#define BOOT_FROM_SMALL_FLASH 0x00 -#define BOOT_FROM_LARGE_FLASH_OR_SRAM 0x01 -#define BOOT_FROM_PCI 0x02 -#define BOOT_DEVICE_UNKNOWN 0x03 - -/*----------------------------------------------------------------------------+ -| EBC Devices Characteristics -| Peripheral Bank Access Parameters - EBC_BxAP -| Peripheral Bank Configuration Register - EBC_BxCR -+----------------------------------------------------------------------------*/ - -/* - * Small Flash and FRAM - * BU Value - * BxAP : 0x03800000 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000 - * B0CR : 0xff098000 - BAS = ff0 - 100 11 00 0000000000000 - * B2CR : 0xe7098000 - BAS = e70 - 100 11 00 0000000000000 - */ -#define EBC_BXAP_SMALL_FLASH EBC_BXAP_BME_DISABLED | \ - EBC_BXAP_TWT_ENCODE(7) | \ - EBC_BXAP_BCE_DISABLE | \ - EBC_BXAP_BCT_2TRANS | \ - EBC_BXAP_CSN_ENCODE(0) | \ - EBC_BXAP_OEN_ENCODE(0) | \ - EBC_BXAP_WBN_ENCODE(0) | \ - EBC_BXAP_WBF_ENCODE(0) | \ - EBC_BXAP_TH_ENCODE(0) | \ - EBC_BXAP_RE_DISABLED | \ - EBC_BXAP_SOR_DELAYED | \ - EBC_BXAP_BEM_WRITEONLY | \ - EBC_BXAP_PEN_DISABLED - -#define EBC_BXCR_SMALL_FLASH_CS0 EBC_BXCR_BAS_ENCODE(0xFF000000) | \ - EBC_BXCR_BS_16MB | \ - EBC_BXCR_BU_RW | \ - EBC_BXCR_BW_8BIT - -#define EBC_BXCR_SMALL_FLASH_CS2 EBC_BXCR_BAS_ENCODE(0xe7000000) | \ - EBC_BXCR_BS_16MB | \ - EBC_BXCR_BU_RW | \ - EBC_BXCR_BW_8BIT - -/* - * Large Flash and SRAM - * BU Value - * BxAP : 0x048ff240 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000 - * B0CR : 0xff09a000 - BAS = ff0 - 100 11 01 0000000000000 - * B2CR : 0xe709a000 - BAS = e70 - 100 11 01 0000000000000 -*/ -#define EBC_BXAP_LARGE_FLASH EBC_BXAP_BME_DISABLED | \ - EBC_BXAP_TWT_ENCODE(7) | \ - EBC_BXAP_BCE_DISABLE | \ - EBC_BXAP_BCT_2TRANS | \ - EBC_BXAP_CSN_ENCODE(0) | \ - EBC_BXAP_OEN_ENCODE(0) | \ - EBC_BXAP_WBN_ENCODE(0) | \ - EBC_BXAP_WBF_ENCODE(0) | \ - EBC_BXAP_TH_ENCODE(0) | \ - EBC_BXAP_RE_DISABLED | \ - EBC_BXAP_SOR_DELAYED | \ - EBC_BXAP_BEM_WRITEONLY | \ - EBC_BXAP_PEN_DISABLED - -#define EBC_BXCR_LARGE_FLASH_CS0 EBC_BXCR_BAS_ENCODE(0xFF000000) | \ - EBC_BXCR_BS_16MB | \ - EBC_BXCR_BU_RW | \ - EBC_BXCR_BW_16BIT - -#define EBC_BXCR_LARGE_FLASH_CS2 EBC_BXCR_BAS_ENCODE(0xE7000000) | \ - EBC_BXCR_BS_16MB | \ - EBC_BXCR_BU_RW | \ - EBC_BXCR_BW_16BIT - -/* - * FPGA - * BU value : - * B1AP = 0x05895240 - 0 00001011 0 00 10 01 01 01 001 0 0 1 0 00000 - * B1CR = 0xe201a000 - BAS = e20 - 000 11 01 00000000000000 - */ -#define EBC_BXAP_FPGA EBC_BXAP_BME_DISABLED | \ - EBC_BXAP_TWT_ENCODE(11) | \ - EBC_BXAP_BCE_DISABLE | \ - EBC_BXAP_BCT_2TRANS | \ - EBC_BXAP_CSN_ENCODE(10) | \ - EBC_BXAP_OEN_ENCODE(1) | \ - EBC_BXAP_WBN_ENCODE(1) | \ - EBC_BXAP_WBF_ENCODE(1) | \ - EBC_BXAP_TH_ENCODE(1) | \ - EBC_BXAP_RE_DISABLED | \ - EBC_BXAP_SOR_DELAYED | \ - EBC_BXAP_BEM_RW | \ - EBC_BXAP_PEN_DISABLED - -#define EBC_BXCR_FPGA_CS1 EBC_BXCR_BAS_ENCODE(0xe2000000) | \ - EBC_BXCR_BS_1MB | \ - EBC_BXCR_BU_RW | \ - EBC_BXCR_BW_16BIT - - unsigned long mfr; - /* - * Define Variables for EBC initialization depending on BOOTSTRAP option - */ - unsigned long sdr0_pinstp, sdr0_sdstp1 ; - unsigned long bootstrap_settings, ebc_data_width, boot_selection; - int computed_boot_device = BOOT_DEVICE_UNKNOWN; - - /*-------------------------------------------------------------------+ - | Initialize EBC CONFIG - - | Keep the Default value, but the bit PDT which has to be set to 1 ?TBC - | default value : - | 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000 - | - +-------------------------------------------------------------------*/ - mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK | - EBC_CFG_PTD_ENABLE | - EBC_CFG_RTC_16PERCLK | - EBC_CFG_ATC_PREVIOUS | - EBC_CFG_DTC_PREVIOUS | - EBC_CFG_CTC_PREVIOUS | - EBC_CFG_OEO_PREVIOUS | - EBC_CFG_EMC_DEFAULT | - EBC_CFG_PME_DISABLE | - EBC_CFG_PR_16); - - /*-------------------------------------------------------------------+ - | - | PART 1 : Initialize EBC Bank 1 - | ============================== - | Bank1 is always associated to the EPLD. - | It has to be initialized prior to other banks settings computation - | since some board registers values may be needed to determine the - | boot type - | - +-------------------------------------------------------------------*/ - mtebc(PB1AP, EBC_BXAP_FPGA); - mtebc(PB1CR, EBC_BXCR_FPGA_CS1); - - /*-------------------------------------------------------------------+ - | - | PART 2 : Determine which boot device was selected - | ================================================= - | - | Read Pin Strap Register in PPC440SPe - | Result can either be : - | - Boot strap = boot from EBC 8bits => Small Flash - | - Boot strap = boot from PCI - | - Boot strap = IIC - | In case of boot from IIC, read Serial Device Strap Register1 - | - | Result can either be : - | - Boot from EBC - EBC Bus Width = 8bits => Small Flash - | - Boot from EBC - EBC Bus Width = 16bits => Large Flash or SRAM - | - Boot from PCI - | - +-------------------------------------------------------------------*/ - /* Read Pin Strap Register in PPC440SP */ - mfsdr(SDR0_PINSTP, sdr0_pinstp); - bootstrap_settings = sdr0_pinstp & SDR0_PINSTP_BOOTSTRAP_MASK; - - switch (bootstrap_settings) { - case SDR0_PINSTP_BOOTSTRAP_SETTINGS0: - /* - * Strapping Option A - * Boot from EBC - 8 bits , Small Flash - */ - computed_boot_device = BOOT_FROM_SMALL_FLASH; - break; - case SDR0_PINSTP_BOOTSTRAP_SETTINGS1: - /* - * Strappping Option B - * Boot from PCI - */ - computed_boot_device = BOOT_FROM_PCI; - break; - case SDR0_PINSTP_BOOTSTRAP_IIC_50_EN: - case SDR0_PINSTP_BOOTSTRAP_IIC_54_EN: - /* - * Strapping Option C or D - * Boot Settings in IIC EEprom address 0x50 or 0x54 - * Read Serial Device Strap Register1 in PPC440SPe - */ - mfsdr(SDR0_SDSTP1, sdr0_sdstp1); - boot_selection = sdr0_sdstp1 & SDR0_SDSTP1_ERPN_MASK; - ebc_data_width = sdr0_sdstp1 & SDR0_SDSTP1_EBCW_MASK; - - switch (boot_selection) { - case SDR0_SDSTP1_ERPN_EBC: - switch (ebc_data_width) { - case SDR0_SDSTP1_EBCW_16_BITS: - computed_boot_device = - BOOT_FROM_LARGE_FLASH_OR_SRAM; - break; - case SDR0_SDSTP1_EBCW_8_BITS : - computed_boot_device = BOOT_FROM_SMALL_FLASH; - break; - } - break; - - case SDR0_SDSTP1_ERPN_PCI: - computed_boot_device = BOOT_FROM_PCI; - break; - default: - /* should not occure */ - computed_boot_device = BOOT_DEVICE_UNKNOWN; - } - break; - default: - /* should not be */ - computed_boot_device = BOOT_DEVICE_UNKNOWN; - break; - } - - /*-------------------------------------------------------------------+ - | - | PART 3 : Compute EBC settings depending on selected boot device - | ====== ====================================================== - | - | Resulting EBC init will be among following configurations : - | - | - Boot from EBC 8bits => boot from Small Flash selected - | EBC-CS0 = Small Flash - | EBC-CS2 = Large Flash and SRAM - | - | - Boot from EBC 16bits => boot from Large Flash or SRAM - | EBC-CS0 = Large Flash or SRAM - | EBC-CS2 = Small Flash - | - | - Boot from PCI - | EBC-CS0 = not initialized to avoid address contention - | EBC-CS2 = same as boot from Small Flash selected - | - +-------------------------------------------------------------------*/ - unsigned long ebc0_cs0_bxap_value = 0, ebc0_cs0_bxcr_value = 0; - unsigned long ebc0_cs2_bxap_value = 0, ebc0_cs2_bxcr_value = 0; - - switch (computed_boot_device) { - /*-------------------------------------------------------------------*/ - case BOOT_FROM_PCI: - /*-------------------------------------------------------------------*/ - /* - * By Default CS2 is affected to LARGE Flash - * do not initialize SMALL FLASH to avoid address contention - * Large Flash - */ - ebc0_cs2_bxap_value = EBC_BXAP_LARGE_FLASH; - ebc0_cs2_bxcr_value = EBC_BXCR_LARGE_FLASH_CS2; - break; - - /*-------------------------------------------------------------------*/ - case BOOT_FROM_SMALL_FLASH: - /*-------------------------------------------------------------------*/ - ebc0_cs0_bxap_value = EBC_BXAP_SMALL_FLASH; - ebc0_cs0_bxcr_value = EBC_BXCR_SMALL_FLASH_CS0; - - /* - * Large Flash or SRAM - */ - /* ebc0_cs2_bxap_value = EBC_BXAP_LARGE_FLASH; */ - ebc0_cs2_bxap_value = 0x048ff240; - ebc0_cs2_bxcr_value = EBC_BXCR_LARGE_FLASH_CS2; - break; - - /*-------------------------------------------------------------------*/ - case BOOT_FROM_LARGE_FLASH_OR_SRAM: - /*-------------------------------------------------------------------*/ - ebc0_cs0_bxap_value = EBC_BXAP_LARGE_FLASH; - ebc0_cs0_bxcr_value = EBC_BXCR_LARGE_FLASH_CS0; - - /* Small flash */ - ebc0_cs2_bxap_value = EBC_BXAP_SMALL_FLASH; - ebc0_cs2_bxcr_value = EBC_BXCR_SMALL_FLASH_CS2; - break; - - /*-------------------------------------------------------------------*/ - default: - /*-------------------------------------------------------------------*/ - /* BOOT_DEVICE_UNKNOWN */ - break; - } - - mtebc(PB0AP, ebc0_cs0_bxap_value); - mtebc(PB0CR, ebc0_cs0_bxcr_value); - mtebc(PB2AP, ebc0_cs2_bxap_value); - mtebc(PB2CR, ebc0_cs2_bxcr_value); - - /*--------------------------------------------------------------------+ - | Interrupt controller setup for the AMCC 440SPe Evaluation board. - +--------------------------------------------------------------------+ - +---------------------------------------------------------------------+ - |Interrupt| Source | Pol. | Sensi.| Crit. | - +---------+-----------------------------------+-------+-------+-------+ - | IRQ 00 | UART0 | High | Level | Non | - | IRQ 01 | UART1 | High | Level | Non | - | IRQ 02 | IIC0 | High | Level | Non | - | IRQ 03 | IIC1 | High | Level | Non | - | IRQ 04 | PCI0X0 MSG IN | High | Level | Non | - | IRQ 05 | PCI0X0 CMD Write | High | Level | Non | - | IRQ 06 | PCI0X0 Power Mgt | High | Level | Non | - | IRQ 07 | PCI0X0 VPD Access | Rising| Edge | Non | - | IRQ 08 | PCI0X0 MSI level 0 | High | Lvl/ed| Non | - | IRQ 09 | External IRQ 15 - (PCI-Express) | pgm H | Pgm | Non | - | IRQ 10 | UIC2 Non-critical Int. | NA | NA | Non | - | IRQ 11 | UIC2 Critical Interrupt | NA | NA | Crit | - | IRQ 12 | PCI Express MSI Level 0 | Rising| Edge | Non | - | IRQ 13 | PCI Express MSI Level 1 | Rising| Edge | Non | - | IRQ 14 | PCI Express MSI Level 2 | Rising| Edge | Non | - | IRQ 15 | PCI Express MSI Level 3 | Rising| Edge | Non | - | IRQ 16 | UIC3 Non-critical Int. | NA | NA | Non | - | IRQ 17 | UIC3 Critical Interrupt | NA | NA | Crit | - | IRQ 18 | External IRQ 14 - (PCI-Express) | Pgm | Pgm | Non | - | IRQ 19 | DMA Channel 0 FIFO Full | High | Level | Non | - | IRQ 20 | DMA Channel 0 Stat FIFO | High | Level | Non | - | IRQ 21 | DMA Channel 1 FIFO Full | High | Level | Non | - | IRQ 22 | DMA Channel 1 Stat FIFO | High | Level | Non | - | IRQ 23 | I2O Inbound Doorbell | High | Level | Non | - | IRQ 24 | Inbound Post List FIFO Not Empt | High | Level | Non | - | IRQ 25 | I2O Region 0 LL PLB Write | High | Level | Non | - | IRQ 26 | I2O Region 1 LL PLB Write | High | Level | Non | - | IRQ 27 | I2O Region 0 HB PLB Write | High | Level | Non | - | IRQ 28 | I2O Region 1 HB PLB Write | High | Level | Non | - | IRQ 29 | GPT Down Count Timer | Rising| Edge | Non | - | IRQ 30 | UIC1 Non-critical Int. | NA | NA | Non | - | IRQ 31 | UIC1 Critical Interrupt | NA | NA | Crit. | - |---------------------------------------------------------------------- - | IRQ 32 | Ext. IRQ 13 - (PCI-Express) |pgm (H)|pgm/Lvl| Non | - | IRQ 33 | MAL Serr | High | Level | Non | - | IRQ 34 | MAL Txde | High | Level | Non | - | IRQ 35 | MAL Rxde | High | Level | Non | - | IRQ 36 | DMC CE or DMC UE | High | Level | Non | - | IRQ 37 | EBC or UART2 | High |Lvl Edg| Non | - | IRQ 38 | MAL TX EOB | High | Level | Non | - | IRQ 39 | MAL RX EOB | High | Level | Non | - | IRQ 40 | PCIX0 MSI Level 1 | High |Lvl Edg| Non | - | IRQ 41 | PCIX0 MSI level 2 | High |Lvl Edg| Non | - | IRQ 42 | PCIX0 MSI level 3 | High |Lvl Edg| Non | - | IRQ 43 | L2 Cache | Risin | Edge | Non | - | IRQ 44 | GPT Compare Timer 0 | Risin | Edge | Non | - | IRQ 45 | GPT Compare Timer 1 | Risin | Edge | Non | - | IRQ 46 | GPT Compare Timer 2 | Risin | Edge | Non | - | IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non | - | IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non | - | IRQ 49 | Ext. IRQ 12 - PCI-X |pgm/Fal|pgm/Lvl| Non | - | IRQ 50 | Ext. IRQ 11 - |pgm (H)|pgm/Lvl| Non | - | IRQ 51 | Ext. IRQ 10 - |pgm (H)|pgm/Lvl| Non | - | IRQ 52 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non | - | IRQ 53 | Ext. IRQ 8 |pgm (H)|pgm/Lvl| Non | - | IRQ 54 | DMA Error | High | Level | Non | - | IRQ 55 | DMA I2O Error | High | Level | Non | - | IRQ 56 | Serial ROM | High | Level | Non | - | IRQ 57 | PCIX0 Error | High | Edge | Non | - | IRQ 58 | Ext. IRQ 7- |pgm (H)|pgm/Lvl| Non | - | IRQ 59 | Ext. IRQ 6- |pgm (H)|pgm/Lvl| Non | - | IRQ 60 | EMAC0 Interrupt | High | Level | Non | - | IRQ 61 | EMAC0 Wake-up | High | Level | Non | - | IRQ 62 | Reserved | High | Level | Non | - | IRQ 63 | XOR | High | Level | Non | - |---------------------------------------------------------------------- - | IRQ 64 | PE0 AL | High | Level | Non | - | IRQ 65 | PE0 VPD Access | Risin | Edge | Non | - | IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non | - | IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non | - | IRQ 68 | PE0 TCR | High | Level | Non | - | IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non | - | IRQ 70 | PE0 DCR Error | High | Level | Non | - | IRQ 71 | Reserved | N/A | N/A | Non | - | IRQ 72 | PE1 AL | High | Level | Non | - | IRQ 73 | PE1 VPD Access | Risin | Edge | Non | - | IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non | - | IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non | - | IRQ 76 | PE1 TCR | High | Level | Non | - | IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non | - | IRQ 78 | PE1 DCR Error | High | Level | Non | - | IRQ 79 | Reserved | N/A | N/A | Non | - | IRQ 80 | PE2 AL | High | Level | Non | - | IRQ 81 | PE2 VPD Access | Risin | Edge | Non | - | IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non | - | IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non | - | IRQ 84 | PE2 TCR | High | Level | Non | - | IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non | - | IRQ 86 | PE2 DCR Error | High | Level | Non | - | IRQ 87 | Reserved | N/A | N/A | Non | - | IRQ 88 | External IRQ(5) | Progr | Progr | Non | - | IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non | - | IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non | - | IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non | - | IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non | - | IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non | - | IRQ 94 | Reserved | N/A | N/A | Non | - | IRQ 95 | Reserved | N/A | N/A | Non | - |--------------------------------------------------------------------- - | IRQ 96 | PE0 INTA | High | Level | Non | - | IRQ 97 | PE0 INTB | High | Level | Non | - | IRQ 98 | PE0 INTC | High | Level | Non | - | IRQ 99 | PE0 INTD | High | Level | Non | - | IRQ 100 | PE1 INTA | High | Level | Non | - | IRQ 101 | PE1 INTB | High | Level | Non | - | IRQ 102 | PE1 INTC | High | Level | Non | - | IRQ 103 | PE1 INTD | High | Level | Non | - | IRQ 104 | PE2 INTA | High | Level | Non | - | IRQ 105 | PE2 INTB | High | Level | Non | - | IRQ 106 | PE2 INTC | High | Level | Non | - | IRQ 107 | PE2 INTD | Risin | Edge | Non | - | IRQ 108 | PCI Express MSI Level 4 | Risin | Edge | Non | - | IRQ 109 | PCI Express MSI Level 5 | Risin | Edge | Non | - | IRQ 110 | PCI Express MSI Level 6 | Risin | Edge | Non | - | IRQ 111 | PCI Express MSI Level 7 | Risin | Edge | Non | - | IRQ 116 | PCI Express MSI Level 12 | Risin | Edge | Non | - | IRQ 112 | PCI Express MSI Level 8 | Risin | Edge | Non | - | IRQ 113 | PCI Express MSI Level 9 | Risin | Edge | Non | - | IRQ 114 | PCI Express MSI Level 10 | Risin | Edge | Non | - | IRQ 115 | PCI Express MSI Level 11 | Risin | Edge | Non | - | IRQ 117 | PCI Express MSI Level 13 | Risin | Edge | Non | - | IRQ 118 | PCI Express MSI Level 14 | Risin | Edge | Non | - | IRQ 119 | PCI Express MSI Level 15 | Risin | Edge | Non | - | IRQ 120 | PCI Express MSI Level 16 | Risin | Edge | Non | - | IRQ 121 | PCI Express MSI Level 17 | Risin | Edge | Non | - | IRQ 122 | PCI Express MSI Level 18 | Risin | Edge | Non | - | IRQ 123 | PCI Express MSI Level 19 | Risin | Edge | Non | - | IRQ 124 | PCI Express MSI Level 20 | Risin | Edge | Non | - | IRQ 125 | PCI Express MSI Level 21 | Risin | Edge | Non | - | IRQ 126 | PCI Express MSI Level 22 | Risin | Edge | Non | - | IRQ 127 | PCI Express MSI Level 23 | Risin | Edge | Non | - +---------+-----------------------------------+-------+-------+------*/ - /*--------------------------------------------------------------------+ - | Put UICs in PowerPC440SPemode. - | Initialise UIC registers. Clear all interrupts. Disable all - | interrupts. - | Set critical interrupt values. Set interrupt polarities. Set - | interrupt trigger levels. Make bit 0 High priority. Clear all - | interrupts again. - +-------------------------------------------------------------------*/ - mtdcr (UIC3SR, 0xffffffff); /* Clear all interrupts */ - mtdcr (UIC3ER, 0x00000000); /* disable all interrupts */ - mtdcr (UIC3CR, 0x00000000); /* Set Critical / Non Critical - * interrupts */ - mtdcr (UIC3PR, 0xffffffff); /* Set Interrupt Polarities */ - mtdcr (UIC3TR, 0x001fffff); /* Set Interrupt Trigger Levels */ - mtdcr (UIC3VR, 0x00000001); /* Set Vect base=0,INT31 Highest - * priority */ - mtdcr (UIC3SR, 0x00000000); /* clear all interrupts */ - mtdcr (UIC3SR, 0xffffffff); /* clear all interrupts */ - - mtdcr (UIC2SR, 0xffffffff); /* Clear all interrupts */ - mtdcr (UIC2ER, 0x00000000); /* disable all interrupts */ - mtdcr (UIC2CR, 0x00000000); /* Set Critical / Non Critical - * interrupts */ - mtdcr (UIC2PR, 0xebebebff); /* Set Interrupt Polarities */ - mtdcr (UIC2TR, 0x74747400); /* Set Interrupt Trigger Levels */ - mtdcr (UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest - * priority */ - mtdcr (UIC2SR, 0x00000000); /* clear all interrupts */ - mtdcr (UIC2SR, 0xffffffff); /* clear all interrupts */ - - mtdcr (UIC1SR, 0xffffffff); /* Clear all interrupts */ - mtdcr (UIC1ER, 0x00000000); /* disable all interrupts */ - mtdcr (UIC1CR, 0x00000000); /* Set Critical / Non Critical - * interrupts */ - mtdcr (UIC1PR, 0xffffffff); /* Set Interrupt Polarities */ - mtdcr (UIC1TR, 0x001f8040); /* Set Interrupt Trigger Levels */ - mtdcr (UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest - * priority */ - mtdcr (UIC1SR, 0x00000000); /* clear all interrupts */ - mtdcr (UIC1SR, 0xffffffff); /* clear all interrupts */ - - mtdcr (UIC0SR, 0xffffffff); /* Clear all interrupts */ - mtdcr (UIC0ER, 0x00000000); /* disable all interrupts excepted - * cascade to be checked */ - mtdcr (UIC0CR, 0x00104001); /* Set Critical / Non Critical - * interrupts */ - mtdcr (UIC0PR, 0xffffffff); /* Set Interrupt Polarities */ - mtdcr (UIC0TR, 0x010f0004); /* Set Interrupt Trigger Levels */ - mtdcr (UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest - * priority */ - mtdcr (UIC0SR, 0x00000000); /* clear all interrupts */ - mtdcr (UIC0SR, 0xffffffff); /* clear all interrupts */ - - mfsdr(SDR0_MFR, mfr); - mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */ - mtsdr(SDR0_MFR, mfr); - - fpga_init(); - - return 0; -} - -int checkboard (void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - printf("Board: Yucca - AMCC 440SPe Evaluation Board"); - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - return 0; -} - -/* - * Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with - * board specific values. - */ -static int ppc440spe_rev_a(void) -{ - if ((get_pvr() == PVR_440SPe_6_RA) || (get_pvr() == PVR_440SPe_RA)) - return 1; - else - return 0; -} - -u32 ddr_wrdtr(u32 default_val) { - /* - * Yucca boards with 440SPe rev. A need a slightly different setup - * for the MCIF0_WRDTR register. - */ - if (ppc440spe_rev_a()) - return (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_270_DEG_ADV); - - return default_val; -} - -u32 ddr_clktr(u32 default_val) { - /* - * Yucca boards with 440SPe rev. A need a slightly different setup - * for the MCIF0_CLKTR register. - */ - if (ppc440spe_rev_a()) - return (SDRAM_CLKTR_CLKP_180_DEG_ADV); - - return default_val; -} - -#if defined(CONFIG_PCI) -int board_pcie_card_present(int port) -{ - u16 reg; - - reg = in_be16((u16 *)FPGA_REG1C); - switch(port) { - case 0: - return !(reg & FPGA_REG1C_PE0_PRSNT); - case 1: - return !(reg & FPGA_REG1C_PE1_PRSNT); - case 2: - return !(reg & FPGA_REG1C_PE2_PRSNT); - default: - return 0; - } -} - -/* - * For the given slot, set endpoint mode, send power to the slot, - * turn on the green LED and turn off the yellow LED, enable the - * clock. In endpoint mode reset bit is read only. - */ -void board_pcie_setup_port(int port, int rootpoint) -{ - u16 power, clock, green_led, yellow_led, - reset_off, rp, ep; - - switch (port) { - case 0: - rp = FPGA_REG1C_PE0_ROOTPOINT; - ep = 0; - break; - case 1: - rp = 0; - ep = FPGA_REG1C_PE1_ENDPOINT; - break; - case 2: - rp = 0; - ep = FPGA_REG1C_PE2_ENDPOINT; - break; - - default: - return; - } - - power = FPGA_REG1A_PWRON_ENCODE(port); - green_led = FPGA_REG1A_GLED_ENCODE(port); - clock = FPGA_REG1A_REFCLK_ENCODE(port); - yellow_led = FPGA_REG1A_YLED_ENCODE(port); - reset_off = FPGA_REG1C_PERST_ENCODE(port); - - out_be16((u16 *)FPGA_REG1A, ~(power | clock | green_led) & - (yellow_led | in_be16((u16 *)FPGA_REG1A))); - - out_be16((u16 *)FPGA_REG1C, ~(ep | reset_off) & - (rp | in_be16((u16 *)FPGA_REG1C))); - - if (rootpoint) { - /* - * Leave device in reset for a while after powering on the - * slot to give it a chance to initialize. - */ - udelay(250 * 1000); - - out_be16((u16 *)FPGA_REG1C, - reset_off | in_be16((u16 *)FPGA_REG1C)); - } -} -#endif /* defined(CONFIG_PCI) */ - -int misc_init_f (void) -{ - uint reg; - - out16(FPGA_REG10, (in16(FPGA_REG10) & - ~(FPGA_REG10_AUTO_NEG_DIS|FPGA_REG10_RESET_ETH)) | - FPGA_REG10_10MHZ_ENABLE | - FPGA_REG10_100MHZ_ENABLE | - FPGA_REG10_GIGABIT_ENABLE | - FPGA_REG10_FULL_DUPLEX ); - - udelay(10000); /* wait 10ms */ - - out16(FPGA_REG10, (in16(FPGA_REG10) | FPGA_REG10_RESET_ETH)); - - /* minimal init for PCIe */ - /* pci express 0 Endpoint Mode */ - mfsdr(SDRN_PESDR_DLPSET(0), reg); - reg &= (~0x00400000); - mtsdr(SDRN_PESDR_DLPSET(0), reg); - /* pci express 1 Rootpoint Mode */ - mfsdr(SDRN_PESDR_DLPSET(1), reg); - reg |= 0x00400000; - mtsdr(SDRN_PESDR_DLPSET(1), reg); - /* pci express 2 Rootpoint Mode */ - mfsdr(SDRN_PESDR_DLPSET(2), reg); - reg |= 0x00400000; - mtsdr(SDRN_PESDR_DLPSET(2), reg); - - out16(FPGA_REG1C,(in16 (FPGA_REG1C) & - ~FPGA_REG1C_PE0_ROOTPOINT & - ~FPGA_REG1C_PE1_ENDPOINT & - ~FPGA_REG1C_PE2_ENDPOINT)); - - return 0; -} - -void fpga_init(void) -{ - /* - * by default sdram access is disabled by fpga - */ - out16(FPGA_REG10, (in16 (FPGA_REG10) | - FPGA_REG10_SDRAM_ENABLE | - FPGA_REG10_ENABLE_DISPLAY )); - - return; -} - -/*---------------------------------------------------------------------------+ - | onboard_pci_arbiter_selected => from EPLD - +---------------------------------------------------------------------------*/ -int onboard_pci_arbiter_selected(int core_pci) -{ -#if 0 - unsigned long onboard_pci_arbiter_sel; - - onboard_pci_arbiter_sel = in16(FPGA_REG0) & FPGA_REG0_EXT_ARB_SEL_MASK; - - if (onboard_pci_arbiter_sel == FPGA_REG0_EXT_ARB_SEL_EXTERNAL) - return (BOARD_OPTION_SELECTED); - else -#endif - return (BOARD_OPTION_NOT_SELECTED); -} - -int board_eth_init(bd_t *bis) -{ - cpu_eth_init(bis); - return pci_eth_init(bis); -} diff --git a/board/amcc/yucca/yucca.h b/board/amcc/yucca/yucca.h deleted file mode 100644 index ac9e5ae..0000000 --- a/board/amcc/yucca/yucca.h +++ /dev/null @@ -1,350 +0,0 @@ -/* - * (C) Copyright 2006 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __YUCCA_H_ -#define __YUCCA_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -/*----------------------------------------------------------------------------+ -| Defines -+----------------------------------------------------------------------------*/ - -#define TMR_FREQ_EXT 25000000 -#define BOARD_UART_CLOCK 11059200 - -#define BOARD_OPTION_SELECTED 1 -#define BOARD_OPTION_NOT_SELECTED 0 - -#define ENGINEERING_CLOCK_CHECKING "clk_chk" -#define ENGINEERING_EXTERNAL_CLOCK "ext_clk" - -#define ENGINEERING_CLOCK_CHECKING_DATA 1 -#define ENGINEERING_EXTERNAL_CLOCK_DATA 2 - -/* ethernet definition */ -#define MAX_ENETMODE_PARM 3 -#define ENETMODE_NEG 0 -#define ENETMODE_SPEED 1 -#define ENETMODE_DUPLEX 2 - -#define ENETMODE_AUTONEG 0 -#define ENETMODE_NO_AUTONEG 1 -#define ENETMODE_10 2 -#define ENETMODE_100 3 -#define ENETMODE_1000 4 -#define ENETMODE_HALF 5 -#define ENETMODE_FULL 6 - -#define NUM_TLB_ENTRIES 64 - -/* MICRON SPD JEDEC ID Code (first byte) - SPD data byte [64] */ -#define MICRON_SPD_JEDEC_ID 0x2c - -/*----------------------------------------------------------------------------+ -| TLB specific defines. -+----------------------------------------------------------------------------*/ -#define TLB_256MB_ALIGN_MASK 0xF0000000 -#define TLB_16MB_ALIGN_MASK 0xFF000000 -#define TLB_1MB_ALIGN_MASK 0xFFF00000 -#define TLB_256KB_ALIGN_MASK 0xFFFC0000 -#define TLB_64KB_ALIGN_MASK 0xFFFF0000 -#define TLB_16KB_ALIGN_MASK 0xFFFFC000 -#define TLB_4KB_ALIGN_MASK 0xFFFFF000 -#define TLB_1KB_ALIGN_MASK 0xFFFFFC00 -#define TLB_256MB_SIZE 0x10000000 -#define TLB_16MB_SIZE 0x01000000 -#define TLB_1MB_SIZE 0x00100000 -#define TLB_256KB_SIZE 0x00040000 -#define TLB_64KB_SIZE 0x00010000 -#define TLB_16KB_SIZE 0x00004000 -#define TLB_4KB_SIZE 0x00001000 -#define TLB_1KB_SIZE 0x00000400 - -#define TLB_WORD0_EPN_MASK 0xFFFFFC00 -#define TLB_WORD0_EPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00) -#define TLB_WORD0_EPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00) -#define TLB_WORD0_V_MASK 0x00000200 -#define TLB_WORD0_V_ENABLE 0x00000200 -#define TLB_WORD0_V_DISABLE 0x00000000 -#define TLB_WORD0_TS_MASK 0x00000100 -#define TLB_WORD0_TS_1 0x00000100 -#define TLB_WORD0_TS_0 0x00000000 -#define TLB_WORD0_SIZE_MASK 0x000000F0 -#define TLB_WORD0_SIZE_1KB 0x00000000 -#define TLB_WORD0_SIZE_4KB 0x00000010 -#define TLB_WORD0_SIZE_16KB 0x00000020 -#define TLB_WORD0_SIZE_64KB 0x00000030 -#define TLB_WORD0_SIZE_256KB 0x00000040 -#define TLB_WORD0_SIZE_1MB 0x00000050 -#define TLB_WORD0_SIZE_16MB 0x00000070 -#define TLB_WORD0_SIZE_256MB 0x00000090 -#define TLB_WORD0_TPAR_MASK 0x0000000F -#define TLB_WORD0_TPAR_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0) -#define TLB_WORD0_TPAR_DECODE(n) ((((unsigned long)(n))>>0)&0x0F) - -#define TLB_WORD1_RPN_MASK 0xFFFFFC00 -#define TLB_WORD1_RPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00) -#define TLB_WORD1_RPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00) -#define TLB_WORD1_PAR1_MASK 0x00000300 -#define TLB_WORD1_PAR1_ENCODE(n) ((((unsigned long)(n))&0x03)<<8) -#define TLB_WORD1_PAR1_DECODE(n) ((((unsigned long)(n))>>8)&0x03) -#define TLB_WORD1_PAR1_0 0x00000000 -#define TLB_WORD1_PAR1_1 0x00000100 -#define TLB_WORD1_PAR1_2 0x00000200 -#define TLB_WORD1_PAR1_3 0x00000300 -#define TLB_WORD1_ERPN_MASK 0x0000000F -#define TLB_WORD1_ERPN_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0) -#define TLB_WORD1_ERPN_DECODE(n) ((((unsigned long)(n))>>0)&0x0F) - -#define TLB_WORD2_PAR2_MASK 0xC0000000 -#define TLB_WORD2_PAR2_ENCODE(n) ((((unsigned long)(n))&0x03)<<30) -#define TLB_WORD2_PAR2_DECODE(n) ((((unsigned long)(n))>>30)&0x03) -#define TLB_WORD2_PAR2_0 0x00000000 -#define TLB_WORD2_PAR2_1 0x40000000 -#define TLB_WORD2_PAR2_2 0x80000000 -#define TLB_WORD2_PAR2_3 0xC0000000 -#define TLB_WORD2_U0_MASK 0x00008000 -#define TLB_WORD2_U0_ENABLE 0x00008000 -#define TLB_WORD2_U0_DISABLE 0x00000000 -#define TLB_WORD2_U1_MASK 0x00004000 -#define TLB_WORD2_U1_ENABLE 0x00004000 -#define TLB_WORD2_U1_DISABLE 0x00000000 -#define TLB_WORD2_U2_MASK 0x00002000 -#define TLB_WORD2_U2_ENABLE 0x00002000 -#define TLB_WORD2_U2_DISABLE 0x00000000 -#define TLB_WORD2_U3_MASK 0x00001000 -#define TLB_WORD2_U3_ENABLE 0x00001000 -#define TLB_WORD2_U3_DISABLE 0x00000000 -#define TLB_WORD2_W_MASK 0x00000800 -#define TLB_WORD2_W_ENABLE 0x00000800 -#define TLB_WORD2_W_DISABLE 0x00000000 -#define TLB_WORD2_I_MASK 0x00000400 -#define TLB_WORD2_I_ENABLE 0x00000400 -#define TLB_WORD2_I_DISABLE 0x00000000 -#define TLB_WORD2_M_MASK 0x00000200 -#define TLB_WORD2_M_ENABLE 0x00000200 -#define TLB_WORD2_M_DISABLE 0x00000000 -#define TLB_WORD2_G_MASK 0x00000100 -#define TLB_WORD2_G_ENABLE 0x00000100 -#define TLB_WORD2_G_DISABLE 0x00000000 -#define TLB_WORD2_E_MASK 0x00000080 -#define TLB_WORD2_E_ENABLE 0x00000080 -#define TLB_WORD2_E_DISABLE 0x00000000 -#define TLB_WORD2_UX_MASK 0x00000020 -#define TLB_WORD2_UX_ENABLE 0x00000020 -#define TLB_WORD2_UX_DISABLE 0x00000000 -#define TLB_WORD2_UW_MASK 0x00000010 -#define TLB_WORD2_UW_ENABLE 0x00000010 -#define TLB_WORD2_UW_DISABLE 0x00000000 -#define TLB_WORD2_UR_MASK 0x00000008 -#define TLB_WORD2_UR_ENABLE 0x00000008 -#define TLB_WORD2_UR_DISABLE 0x00000000 -#define TLB_WORD2_SX_MASK 0x00000004 -#define TLB_WORD2_SX_ENABLE 0x00000004 -#define TLB_WORD2_SX_DISABLE 0x00000000 -#define TLB_WORD2_SW_MASK 0x00000002 -#define TLB_WORD2_SW_ENABLE 0x00000002 -#define TLB_WORD2_SW_DISABLE 0x00000000 -#define TLB_WORD2_SR_MASK 0x00000001 -#define TLB_WORD2_SR_ENABLE 0x00000001 -#define TLB_WORD2_SR_DISABLE 0x00000000 - -/*----------------------------------------------------------------------------+ -| Board specific defines. -+----------------------------------------------------------------------------*/ -#define NONCACHE_MEMORY_SIZE (64*1024) -#define NONCACHE_AREA0_ENDOFFSET (64*1024) -#define NONCACHE_AREA1_ENDOFFSET (32*1024) - -#define FLASH_SECTORSIZE 0x00010000 - -/* SDRAM MICRON */ -#define SDRAM_MICRON 0x2C - -#define SDRAM_TRUE 1 -#define SDRAM_FALSE 0 -#define SDRAM_DDR1 1 -#define SDRAM_DDR2 2 -#define SDRAM_NONE 0 -#define MAXDIMMS 2 /* Changes le 12/01/05 pour 1.6 */ -#define MAXRANKS 4 /* Changes le 12/01/05 pour 1.6 */ -#define MAXBANKSPERDIMM 2 -#define MAXRANKSPERDIMM 2 -#define MAXBXCF 4 /* Changes le 12/01/05 pour 1.6 */ -#define MAXSDRAMMEMORY 0xFFFFFFFF /* 4GB */ -#define ERROR_STR_LENGTH 256 -#define MAX_SPD_BYTES 256 /* Max number of bytes on the DIMM's SPD EEPROM */ - -/*----------------------------------------------------------------------------+ -| SDR Configuration registers -+----------------------------------------------------------------------------*/ -/* Serial Device Strap Reg 0 */ -#define sdr_pstrp0 0x0040 - -#define SDR0_SDSTP1_EBC_ROM_BS_MASK 0x00000080 /* EBC Boot bus width Mask */ -#define SDR0_SDSTP1_EBC_ROM_BS_16BIT 0x00000080 /* EBC 16 Bits */ -#define SDR0_SDSTP1_EBC_ROM_BS_8BIT 0x00000000 /* EBC 8 Bits */ - -#define SDR0_SDSTP1_BOOT_SEL_MASK 0x00080000 /* Boot device Selection Mask */ -#define SDR0_SDSTP1_BOOT_SEL_EBC 0x00000000 /* EBC */ -#define SDR0_SDSTP1_BOOT_SEL_PCI 0x00080000 /* PCI */ - -#define SDR0_SDSTP1_EBC_SIZE_MASK 0x00000060 /* Boot rom size Mask */ -#define SDR0_SDSTP1_BOOT_SIZE_16MB 0x00000060 /* 16 MB */ -#define SDR0_SDSTP1_BOOT_SIZE_8MB 0x00000040 /* 8 MB */ -#define SDR0_SDSTP1_BOOT_SIZE_4MB 0x00000020 /* 4 MB */ -#define SDR0_SDSTP1_BOOT_SIZE_2MB 0x00000000 /* 2 MB */ - -/* Serial Device Enabled - Addr = 0xA8 */ -#define SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS5 -/* Serial Device Enabled - Addr = 0xA4 */ -#define SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS7 - -/* Pin Straps Reg */ -#define SDR0_PSTRP0 0x0040 -#define SDR0_PSTRP0_BOOTSTRAP_MASK 0xE0000000 /* Strap Bits */ - -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS0 0x00000000 /* Default strap settings 0 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS1 0x20000000 /* Default strap settings 1 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS2 0x40000000 /* Default strap settings 2 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS3 0x60000000 /* Default strap settings 3 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS4 0x80000000 /* Default strap settings 4 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS5 0xA0000000 /* Default strap settings 5 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS6 0xC0000000 /* Default strap settings 6 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS7 0xE0000000 /* Default strap settings 7 */ - -/* fpgareg - defines are in include/config/YUCCA.h */ - -#define SDR0_CUST0_ENET3_MASK 0x00000080 -#define SDR0_CUST0_ENET3_COPPER 0x00000000 -#define SDR0_CUST0_ENET3_FIBER 0x00000080 -#define SDR0_CUST0_RGMII3_MASK 0x00000070 -#define SDR0_CUST0_RGMII3_ENCODE(n) ((((unsigned long)(n))&0x7)<<4) -#define SDR0_CUST0_RGMII3_DECODE(n) ((((unsigned long)(n))>>4)&0x07) -#define SDR0_CUST0_RGMII3_DISAB 0x00000000 -#define SDR0_CUST0_RGMII3_RTBI 0x00000040 -#define SDR0_CUST0_RGMII3_RGMII 0x00000050 -#define SDR0_CUST0_RGMII3_TBI 0x00000060 -#define SDR0_CUST0_RGMII3_GMII 0x00000070 -#define SDR0_CUST0_ENET2_MASK 0x00000008 -#define SDR0_CUST0_ENET2_COPPER 0x00000000 -#define SDR0_CUST0_ENET2_FIBER 0x00000008 -#define SDR0_CUST0_RGMII2_MASK 0x00000007 -#define SDR0_CUST0_RGMII2_ENCODE(n) ((((unsigned long)(n))&0x7)<<0) -#define SDR0_CUST0_RGMII2_DECODE(n) ((((unsigned long)(n))>>0)&0x07) -#define SDR0_CUST0_RGMII2_DISAB 0x00000000 -#define SDR0_CUST0_RGMII2_RTBI 0x00000004 -#define SDR0_CUST0_RGMII2_RGMII 0x00000005 -#define SDR0_CUST0_RGMII2_TBI 0x00000006 -#define SDR0_CUST0_RGMII2_GMII 0x00000007 - -#define ONE_MILLION 1000000 -#define ONE_BILLION 1000000000 - -/*----------------------------------------------------------------------------+ -| X -| XX -| XX XXX XXXXX XX XXX XXXXX -| XX XX X XXX XX XX -| XX XX XXXXXX XX XX -| XX XX X XX XX XX XX -| XXX XX XXXXX X XXXX XXX -+----------------------------------------------------------------------------*/ -/*----------------------------------------------------------------------------+ -| Declare Configuration values -+----------------------------------------------------------------------------*/ - -typedef enum config_selection { - CONFIG_NOT_SELECTED, - CONFIG_SELECTED -} config_selection_t; - -typedef enum config_list { - UART2_IN_SERVICE_MODE, - CPU_TRACE_MODE, - UART1_CTS_RTS, - CONFIG_NB -} config_list_t; - -#define MAX_CONFIG_SELECT_NB 3 - -#define BOARD_INFO_UART2_IN_SERVICE_MODE 1 -#define BOARD_INFO_CPU_TRACE_MODE 2 -#define BOARD_INFO_UART1_CTS_RTS_MODE 4 - -void force_bup_config_selection(config_selection_t *confgi_select_P); -void update_config_selection_table(config_selection_t *config_select_P); -void display_config_selection(config_selection_t *config_select_P); - -/*----------------------------------------------------------------------------+ -| XX -| -| XXXX XX XXX XXX XXXX -| XX XX XX XX XX XX -| XX XXX XX XX XX XX XX -| XX XX XXXXX XX XX XX -| XXXX XX XXXX XXXX -| XXXX -| -| -| -| +------------------------------------------------------------------+ -| | GPIO/Secondary func | Primary Function | I/O | Alternate1 | I/O | -| +----------------------+------------------+-----+------------+-----+ -| | | | | | | -| | GPIO0_0 | PCIX0REQ2_N | I/O | TRCCLK | | -| | GPIO0_1 | PCIX0REQ3_N | I/O | TRCBS0 | | -| | GPIO0_2 | PCIX0GNT2_N | I/O | TRCBS1 | | -| | GPIO0_3 | PCIX0GNT3_N | I/O | TRCBS2 | | -| | GPIO0_4 | PCIX1REQ2_N | I/O | TRCES0 | | -| | GPIO0_5 | PCIX1REQ3_N | I/O | TRCES1 | | -| | GPIO0_6 | PCIX1GNT2_N | I/O | TRCES2 | NA | -| | GPIO0_7 | PCIX1GNT3_N | I/O | TRCES3 | NA | -| | GPIO0_8 | PERREADY | I | TRCES4 | NA | -| | GPIO0_9 | PERCS1_N | O | TRCTS0 | NA | -| | GPIO0_10 | PERCS2_N | O | TRCTS1 | NA | -| | GPIO0_11 | IRQ0 | I | TRCTS2 | NA | -| | GPIO0_12 | IRQ1 | I | TRCTS3 | NA | -| | GPIO0_13 | IRQ2 | I | TRCTS4 | NA | -| | GPIO0_14 | IRQ3 | I | TRCTS5 | NA | -| | GPIO0_15 | IRQ4 | I | TRCTS6 | NA | -| | GPIO0_16 | IRQ5 | I | UART2RX | I | -| | GPIO0_17 | PERBE0_N | O | UART2TX | O | -| | GPIO0_18 | PCI0GNT0_N | I/O | NA | NA | -| | GPIO0_19 | PCI0GNT1_N | I/O | NA | NA | -| | GPIO0_20 | PCI0REQ0_N | I/O | NA | NA | -| | GPIO0_21 | PCI0REQ1_N | I/O | NA | NA | -| | GPIO0_22 | PCI1GNT0_N | I/O | NA | NA | -| | GPIO0_23 | PCI1GNT1_N | I/O | NA | NA | -| | GPIO0_24 | PCI1REQ0_N | I/O | NA | NA | -| | GPIO0_25 | PCI1REQ1_N | I/O | NA | NA | -| | GPIO0_26 | PCI2GNT0_N | I/O | NA | NA | -| | GPIO0_27 | PCI2GNT1_N | I/O | NA | NA | -| | GPIO0_28 | PCI2REQ0_N | I/O | NA | NA | -| | GPIO0_29 | PCI2REQ1_N | I/O | NA | NA | -| | GPIO0_30 | UART1RX | I | NA | NA | -| | GPIO0_31 | UART1TX | O | NA | NA | -| | | | | | | -| +----------------------+------------------+-----+------------+-----+ -| -+----------------------------------------------------------------------------*/ - -unsigned long auto_calc_speed(void); -/*----------------------------------------------------------------------------+ -| Prototypes -+----------------------------------------------------------------------------*/ -void print_evb440spe_info(void); - -int onboard_pci_arbiter_selected(int core_pci); - -#ifdef __cplusplus -} -#endif -#endif /* __YUCCA_H_ */ diff --git a/configs/acadia_defconfig b/configs/acadia_defconfig deleted file mode 100644 index 26221ce..0000000 --- a/configs/acadia_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_ACADIA=y diff --git a/configs/bamboo_defconfig b/configs/bamboo_defconfig deleted file mode 100644 index 1d66807..0000000 --- a/configs/bamboo_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_BAMBOO=y diff --git a/configs/bubinga_defconfig b/configs/bubinga_defconfig deleted file mode 100644 index 65ea4d1..0000000 --- a/configs/bubinga_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_BUBINGA=y diff --git a/configs/ebony_defconfig b/configs/ebony_defconfig deleted file mode 100644 index db93555..0000000 --- a/configs/ebony_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_EBONY=y diff --git a/configs/haleakala_defconfig b/configs/haleakala_defconfig deleted file mode 100644 index 7e63116..0000000 --- a/configs/haleakala_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="HALEAKALA" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_KILAUEA=y diff --git a/configs/katmai_defconfig b/configs/katmai_defconfig deleted file mode 100644 index 8492314..0000000 --- a/configs/katmai_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_KATMAI=y diff --git a/configs/kilauea_defconfig b/configs/kilauea_defconfig deleted file mode 100644 index 28021d9..0000000 --- a/configs/kilauea_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="KILAUEA" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_KILAUEA=y diff --git a/configs/luan_defconfig b/configs/luan_defconfig deleted file mode 100644 index d42b4a9..0000000 --- a/configs/luan_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_LUAN=y diff --git a/configs/makalu_defconfig b/configs/makalu_defconfig deleted file mode 100644 index ed9b82d..0000000 --- a/configs/makalu_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_MAKALU=y diff --git a/configs/ocotea_defconfig b/configs/ocotea_defconfig deleted file mode 100644 index 34518cd..0000000 --- a/configs/ocotea_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_OCOTEA=y diff --git a/configs/rainier_defconfig b/configs/rainier_defconfig deleted file mode 100644 index 666cb18..0000000 --- a/configs/rainier_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="RAINIER" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_SEQUOIA=y diff --git a/configs/rainier_ramboot_defconfig b/configs/rainier_ramboot_defconfig deleted file mode 100644 index 2ecb1cf..0000000 --- a/configs/rainier_ramboot_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="RAINIER,SYS_RAMBOOT,SYS_TEXT_BASE=0x01000000,SYS_LDSCRIPT=board/amcc/sequoia/u-boot-ram.lds" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_SEQUOIA=y diff --git a/configs/redwood_defconfig b/configs/redwood_defconfig deleted file mode 100644 index ad87d0e..0000000 --- a/configs/redwood_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_REDWOOD=y diff --git a/configs/sequoia_defconfig b/configs/sequoia_defconfig deleted file mode 100644 index 678c2bb..0000000 --- a/configs/sequoia_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SEQUOIA" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_SEQUOIA=y diff --git a/configs/sequoia_ramboot_defconfig b/configs/sequoia_ramboot_defconfig deleted file mode 100644 index 0d0c6c1..0000000 --- a/configs/sequoia_ramboot_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SEQUOIA,SYS_RAMBOOT,SYS_TEXT_BASE=0x01000000,SYS_LDSCRIPT=board/amcc/sequoia/u-boot-ram.lds" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_SEQUOIA=y diff --git a/configs/sycamore_defconfig b/configs/sycamore_defconfig deleted file mode 100644 index 844e67f..0000000 --- a/configs/sycamore_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_WALNUT=y diff --git a/configs/taihu_defconfig b/configs/taihu_defconfig deleted file mode 100644 index ac83725..0000000 --- a/configs/taihu_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_TAIHU=y diff --git a/configs/taishan_defconfig b/configs/taishan_defconfig deleted file mode 100644 index e956c6f..0000000 --- a/configs/taishan_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_TAISHAN=y diff --git a/configs/walnut_defconfig b/configs/walnut_defconfig deleted file mode 100644 index 844e67f..0000000 --- a/configs/walnut_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_WALNUT=y diff --git a/configs/yellowstone_defconfig b/configs/yellowstone_defconfig deleted file mode 100644 index 843095b..0000000 --- a/configs/yellowstone_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="YELLOWSTONE" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_YOSEMITE=y diff --git a/configs/yosemite_defconfig b/configs/yosemite_defconfig deleted file mode 100644 index d5eea68..0000000 --- a/configs/yosemite_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="YOSEMITE" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_YOSEMITE=y diff --git a/configs/yucca_defconfig b/configs/yucca_defconfig deleted file mode 100644 index 6c8e20a..0000000 --- a/configs/yucca_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_YUCCA=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 59d2142..e18fcd5 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,14 +12,34 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= -korat powerpc ppc4xx - - Larry Johnson <lrj(a)acm.org> -galaxy5200 powerpc mpc5xxx - - Eric Millbrandt <emillbrandt(a)dekaresearch.com> -W7OLMC powerpc ppc4xx - - Erik Theisen <etheisen(a)mindspring.com> -W7OLMG powerpc ppc4xx - - Erik Theisen <etheisen(a)mindspring.com> -aev powerpc mpc5xxx - - -TB5200 powerpc mpc5xxx - - -JSE powerpc ppc4xx - - Stephen Williams <steve(a)icarus.com> -BC3450 powerpc mpc5xxx - - +acadia powerpc ppc4xx - - Stefan Roese <sr(a)denx.de> +bamboo powerpc ppc4xx - - Stefan Roese <sr(a)denx.de> +bubinga powerpc ppc4xx - - +ebony powerpc ppc4xx - - Stefan Roese <sr(a)denx.de> +katmai powerpc ppc4xx - - Stefan Roese <sr(a)denx.de> +haleakala powerpc ppc4xx - - Stefan Roese <sr(a)denx.de> +kilauea powerpc ppc4xx - - Stefan Roese <sr(a)denx.de> +luan powerpc ppc4xx - - John Otken <jotken(a)softadvances.com> +makalu powerpc ppc4xx - - Stefan Roese <sr(a)denx.de> +ocotea powerpc ppc4xx - - Stefan Roese <sr(a)denx.de> +redwood powerpc ppc4xx - - Feng Kan <fkan(a)amcc.com> +rainier powerpc ppc4xx - - Stefan Roese <sr(a)denx.de> +sequoia powerpc ppc4xx - - Stefan Roese <sr(a)denx.de> +taihu powerpc ppc4xx - - John Otken <jotken(a)softadvances.com> +taishan powerpc ppc4xx - - Stefan Roese <sr(a)denx.de> +sycamore powerpc ppc4xx - - Stefan Roese <sr(a)denx.de> +walnut powerpc ppc4xx - - Stefan Roese <sr(a)denx.de> +yellowstone powerpc ppc4xx - - Stefan Roese <sr(a)denx.de> +yosemite powerpc ppc4xx - - Stefan Roese <sr(a)denx.de> +yucca powerpc ppc4xx - - +korat powerpc ppc4xx 5043045d 2015-03-17 Larry Johnson <lrj(a)acm.org> +galaxy5200 powerpc mpc5xxx 41eb4e5c 2015-03-17 Eric Millbrandt <emillbrandt(a)dekaresearch.com> +W7OLMC powerpc ppc4xx 6beecd5d 2015-03-17 Erik Theisen <etheisen(a)mindspring.com> +W7OLMG powerpc ppc4xx 6beecd5d 2015-03-17 Erik Theisen <etheisen(a)mindspring.com> +aev powerpc mpc5xxx 470ee8b1 2015-03-17 +TB5200 powerpc mpc5xxx 470ee8b1 2015-03-17 +JSE powerpc ppc4xx 2da8137b 2015-03-17 Stephen Williams <steve(a)icarus.com> +BC3450 powerpc mpc5xxx f8296d69 2015-03-17 hawkboard arm arm926ejs cb957cda 2015-02-24 Syed Mohammed Khasim <sm.khasim(a)gmail.com>:Sughosh Ganu <urwithsughosh(a)gmail.com> tnetv107x arm arm1176 50b82c4b 2015-02-24 Chan-Taek Park <c-park(a)ti.com> a320evb arm arm920t 29fc6f24 2015-02-24 Po-Yu Chuang <ratbert(a)faraday-tech.com> diff --git a/include/configs/acadia.h b/include/configs/acadia.h deleted file mode 100644 index 4dd5720..0000000 --- a/include/configs/acadia.h +++ /dev/null @@ -1,265 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************ - * acadia.h - configuration for AMCC Acadia (405EZ) - ***********************************************************************/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_ACADIA 1 /* Board is Acadia */ -#define CONFIG_405EZ 1 /* Specifc 405EZ support*/ - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFF80000 -#endif - -/* - * Include common defines/options for all AMCC eval boards - */ -#define CONFIG_HOSTNAME acadia -#include "amcc-common.h" - -/* Detect Acadia PLL input clock automatically via CPLD bit */ -#define CONFIG_SYS_CLK_FREQ ((in8(CONFIG_SYS_CPLD_BASE + 0) == 0x0c) ? \ - 66666666 : 33333000) - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_MISC_INIT_F 1 /* Call misc_init_f */ - -#define CONFIG_NO_SERIAL_EEPROM -/*#undef CONFIG_NO_SERIAL_EEPROM*/ - -#ifdef CONFIG_NO_SERIAL_EEPROM -/*---------------------------------------------------------------------------- - * PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI, - * assuming a 66MHz input clock to the 405EZ. - *---------------------------------------------------------------------------*/ -/* #define PLLMR0_100_100_12 */ -#define PLLMR0_200_133_66 -/* #define PLLMR0_266_160_80 */ -/* #define PLLMR0_333_166_83 */ -#endif - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_BASE 0xfe000000 -#define CONFIG_SYS_CPLD_BASE 0x80000000 -#define CONFIG_SYS_NAND_ADDR 0xd0000000 -#define CONFIG_SYS_USB_HOST 0xef603000 /* USB OHCI 1.1 controller */ - -/*----------------------------------------------------------------------- - * Initial RAM & stack pointer - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_TEMP_STACK_OCM 1 /* OCM as init ram */ - -/* On Chip Memory location */ -#define CONFIG_SYS_OCM_DATA_ADDR 0xf8000000 -#define CONFIG_SYS_OCM_DATA_SIZE 0x4000 /* 16K of onchip SRAM */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ -#define CONFIG_SYS_BASE_BAUD 691200 - -/*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ - -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#endif - -/*----------------------------------------------------------------------- - * RAM (CRAM) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MBYTES_RAM 64 /* 64MB */ - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 - -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_AD7414 1 /* use AD7414 */ -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 70 -#define CONFIG_SYS_DTT_LOW_TEMP -30 -#define CONFIG_SYS_DTT_HYSTERESIS 3 - -/*----------------------------------------------------------------------- - * Ethernet - *----------------------------------------------------------------------*/ -#define CONFIG_PHY_ADDR 0 /* PHY address */ -#define CONFIG_HAS_ETH0 1 - -/* - * Default environment variables - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_AMCC_DEF_ENV \ - CONFIG_AMCC_DEF_ENV_POWERPC \ - CONFIG_AMCC_DEF_ENV_PPC_OLD \ - CONFIG_AMCC_DEF_ENV_NOR_UPD \ - "kernel_addr=fff10000\0" \ - "ramdisk_addr=fff20000\0" \ - "kozio=bootm ffc60000\0" \ - "" - -#define CONFIG_USB_OHCI -#define CONFIG_USB_STORAGE - -/* Partitions */ -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION -#define CONFIG_ISO_PARTITION - -#define CONFIG_SUPPORT_VFAT - -/* - * Commands additional to the ones defined in amcc-common.h - */ -#define CONFIG_CMD_DTT -#define CONFIG_CMD_NAND -#define CONFIG_CMD_USB - -/*----------------------------------------------------------------------- - * NAND FLASH - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS) -#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ - -/*----------------------------------------------------------------------- - * External Bus Controller (EBC) Setup - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_NAND_CS 3 -/* Memory Bank 0 (Flash) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x03337200 -#define CONFIG_SYS_EBC_PB0CR 0xfe0bc000 - -/* Memory Bank 3 (NAND-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB3AP 0x018003c0 -#define CONFIG_SYS_EBC_PB3CR (CONFIG_SYS_NAND_ADDR | 0x1c000) - -/* Just initial configuration for CRAM. Will be changed in memory.c to sync mode*/ -/* Memory Bank 1 (CRAM) initialization */ -#define CONFIG_SYS_EBC_PB1AP 0x030400c0 -#define CONFIG_SYS_EBC_PB1CR 0x000bc000 - -/* Memory Bank 2 (CRAM) initialization */ -#define CONFIG_SYS_EBC_PB2AP 0x030400c0 -#define CONFIG_SYS_EBC_PB2CR 0x020bc000 - -/* Memory Bank 4 (CPLD) initialization */ -#define CONFIG_SYS_EBC_PB4AP 0x04006000 -#define CONFIG_SYS_EBC_PB4CR (CONFIG_SYS_CPLD_BASE | 0x18000) - -#define CONFIG_SYS_EBC_CFG 0xf8400000 - -/*----------------------------------------------------------------------- - * GPIO Setup - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_GPIO_CRAM_CLK 8 -#define CONFIG_SYS_GPIO_CRAM_WAIT 9 /* GPIO-In */ -#define CONFIG_SYS_GPIO_CRAM_ADV 10 -#define CONFIG_SYS_GPIO_CRAM_CRE (32 + 21) /* GPIO-Out */ - -/*----------------------------------------------------------------------- - * Definitions for GPIO_0 setup (PPC405EZ specific) - * - * GPIO0[0-2] - External Bus Controller CS_4 - CS_6 Outputs - * GPIO0[3] - NAND FLASH Controller CE3 (NFCE3) Output - * GPIO0[4] - External Bus Controller Hold Input - * GPIO0[5] - External Bus Controller Priority Input - * GPIO0[6] - External Bus Controller HLDA Output - * GPIO0[7] - External Bus Controller Bus Request Output - * GPIO0[8] - CRAM Clk Output - * GPIO0[9] - External Bus Controller Ready Input - * GPIO0[10] - CRAM Adv Output - * GPIO0[11-24] - NAND Flash Control Data -> Bypasses GPIO when enabled - * GPIO0[25] - External DMA Request Input - * GPIO0[26] - External DMA EOT I/O - * GPIO0[25] - External DMA Ack_n Output - * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs - * GPIO0[28-30] - Trace Outputs / PWM Inputs - * GPIO0[31] - PWM_8 I/O - */ -#define CONFIG_SYS_GPIO0_TCR 0xC0A00000 -#define CONFIG_SYS_GPIO0_OSRL 0x50004400 -#define CONFIG_SYS_GPIO0_OSRH 0x02000055 -#define CONFIG_SYS_GPIO0_ISR1L 0x00001000 -#define CONFIG_SYS_GPIO0_ISR1H 0x00000055 -#define CONFIG_SYS_GPIO0_TSRL 0x02000000 -#define CONFIG_SYS_GPIO0_TSRH 0x00000055 - -/*----------------------------------------------------------------------- - * Definitions for GPIO_1 setup (PPC405EZ specific) - * - * GPIO1[0-6] - PWM_9 to PWM_15 I/O - * GPIO1[7] - PWM_DIV_CLK (Out) / IRQ4 Input - * GPIO1[8] - TS5 Output / DAC_IP_TRIG Input - * GPIO1[9] - TS6 Output / ADC_IP_TRIG Input - * GPIO1[10-12] - UART0 Control Inputs - * GPIO1[13] - UART0_DTR_N Output/IEEE_1588_TS Output/TMRCLK Input - * GPIO1[14] - UART0_RTS_N Output/SPI_SS_2_N Output - * GPIO1[15] - SPI_SS_3_N Output/UART0_RI_N Input - * GPIO1[16] - SPI_SS_1_N Output - * GPIO1[17-20] - Trace Output/External Interrupts IRQ0 - IRQ3 inputs - */ -#define CONFIG_SYS_GPIO1_TCR 0xFFFF8414 -#define CONFIG_SYS_GPIO1_OSRL 0x40000110 -#define CONFIG_SYS_GPIO1_OSRH 0x55455555 -#define CONFIG_SYS_GPIO1_ISR1L 0x15555445 -#define CONFIG_SYS_GPIO1_ISR1H 0x00000000 -#define CONFIG_SYS_GPIO1_TSRL 0x00000000 -#define CONFIG_SYS_GPIO1_TSRH 0x00000000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h deleted file mode 100644 index 6ba4aaf..0000000 --- a/include/configs/bamboo.h +++ /dev/null @@ -1,222 +0,0 @@ -/* - * (C) Copyright 2005-2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************ - * bamboo.h - configuration for BAMBOO board - ***********************************************************************/ -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_BAMBOO 1 /* Board is BAMBOO */ -#define CONFIG_440EP 1 /* Specific PPC440EP support */ -#define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 -#endif - -/* - * Include common defines/options for all AMCC eval boards - */ -#define CONFIG_HOSTNAME bamboo -#include "amcc-common.h" - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ - -/* - * Please note that, if NAND support is enabled, the 2nd ethernet port - * can't be used because of pin multiplexing. So, if you want to use the - * 2nd ethernet port you have to "undef" the following define. - */ -#define CONFIG_BAMBOO_NAND 1 /* enable nand flash support */ - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_BASE 0xfff00000 /* start of FLASH */ -#define CONFIG_SYS_PCI_MEMBASE 0xa0000000 /* mapped pci memory*/ -#define CONFIG_SYS_PCI_MEMBASE1 CONFIG_SYS_PCI_MEMBASE + 0x10000000 -#define CONFIG_SYS_PCI_MEMBASE2 CONFIG_SYS_PCI_MEMBASE1 + 0x10000000 -#define CONFIG_SYS_PCI_MEMBASE3 CONFIG_SYS_PCI_MEMBASE2 + 0x10000000 - -/*Don't change either of these*/ -#define CONFIG_SYS_PCI_BASE 0xe0000000 /* internal PCI regs*/ -/*Don't change either of these*/ - -#define CONFIG_SYS_USB_DEVICE 0x50000000 -#define CONFIG_SYS_NVRAM_BASE_ADDR 0x80000000 -#define CONFIG_SYS_BOOT_BASE_ADDR 0xf0000000 -#define CONFIG_SYS_NAND_ADDR 0x90000000 -#define CONFIG_SYS_NAND2_ADDR 0x94000000 - -/*----------------------------------------------------------------------- - * Initial RAM & stack pointer (placed in SDRAM) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_INIT_RAM_DCACHE 1 /* d-cache as init ram */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* DCache */ -#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* use external 11.059MHz clk */ - -/*----------------------------------------------------------------------- - * NVRAM/RTC - * - * NOTE: The RTC registers are located at 0x7FFF0 - 0x7FFFF - * The DS1558 code assumes this condition - * - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */ -#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */ - -/*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_ADDR0 0x555 -#define CONFIG_SYS_FLASH_ADDR1 0x2aa -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char - -#define CONFIG_SYS_FLASH_2ND_16BIT_DEV 1 /* bamboo has 8 and 16bit device */ -#define CONFIG_SYS_FLASH_2ND_ADDR 0x87800000 /* bamboo has 8 and 16bit device */ - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR ((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#endif /* CONFIG_ENV_IS_IN_FLASH */ - -/*----------------------------------------------------------------------- - * NAND FLASH - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MAX_NAND_DEVICE 2 -#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS) -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_ADDR + 2 } -#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ -#define CONFIG_SYS_NAND_CS 1 - -/*----------------------------------------------------------------------- - * DDR SDRAM - *----------------------------------------------------------------------------- */ -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ -#undef CONFIG_DDR_ECC /* don't use ECC */ -#define CONFIG_SYS_SIMULATE_SPD_EEPROM 0xff /* simulate spd eeprom on this address */ -#define SPD_EEPROM_ADDRESS {CONFIG_SYS_SIMULATE_SPD_EEPROM, 0x50, 0x51} -#define CONFIG_SYS_MBYTES_SDRAM (64) /* 64MB fixed size for early-sdram-init */ -#define CONFIG_PROG_SDRAM_TLB - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 - -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -#ifdef CONFIG_ENV_IS_IN_EEPROM -#define CONFIG_ENV_SIZE 0x200 /* Size of Environment vars */ -#define CONFIG_ENV_OFFSET 0x0 -#endif /* CONFIG_ENV_IS_IN_EEPROM */ - -/* - * Default environment variables - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_AMCC_DEF_ENV \ - CONFIG_AMCC_DEF_ENV_POWERPC \ - CONFIG_AMCC_DEF_ENV_PPC_OLD \ - CONFIG_AMCC_DEF_ENV_NOR_UPD \ - "kernel_addr=fff00000\0" \ - "ramdisk_addr=fff10000\0" \ - "" - -#define CONFIG_HAS_ETH0 -#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */ -#define CONFIG_PHY1_ADDR 1 - -#ifndef CONFIG_BAMBOO_NAND -#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ -#endif /* CONFIG_BAMBOO_NAND */ - -#ifdef CONFIG_440EP -/* USB */ -#define CONFIG_USB_OHCI -#define CONFIG_USB_STORAGE - -/*Comment this out to enable USB 1.1 device*/ -#define USB_2_0_DEVICE -#endif /*CONFIG_440EP*/ - -/* - * Commands additional to the ones defined in amcc-common.h - */ -#define CONFIG_CMD_DATE -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_PCI -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP -#define CONFIG_CMD_USB - -#ifdef CONFIG_BAMBOO_NAND -#define CONFIG_CMD_NAND -#endif - -#define CONFIG_SUPPORT_VFAT - -/* Partitions */ -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION -#define CONFIG_ISO_PARTITION - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -/* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/ - -/* Board-specific PCI */ -#define CONFIG_SYS_PCI_TARGET_INIT -#define CONFIG_SYS_PCI_MASTER_INIT - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ -#define CONFIG_SYS_PCI_SUBSYS_ID 0xcafe /* Whatever */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h deleted file mode 100644 index ea7b104..0000000 --- a/include/configs/bubinga.h +++ /dev/null @@ -1,305 +0,0 @@ -/* - * (C) Copyright 2000-2005 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_BUBINGA 1 /* ...on a BUBINGA board */ - -#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 - -/* - * Include common defines/options for all AMCC eval boards - */ -#define CONFIG_HOSTNAME bubinga -#include "amcc-common.h" - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ - -#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ - -#define CONFIG_NO_SERIAL_EEPROM -/*#undef CONFIG_NO_SERIAL_EEPROM*/ -/*----------------------------------------------------------------------------*/ -#ifdef CONFIG_NO_SERIAL_EEPROM - -/* -!------------------------------------------------------------------------------- -! Defines for entry options. -! Note: Because the 405EP SDRAM controller does not support ECC, ECC DIMMs that -! are plugged in the board will be utilized as non-ECC DIMMs. -!------------------------------------------------------------------------------- -*/ -#define AUTO_MEMORY_CONFIG -#define DIMM_READ_ADDR 0xAB -#define DIMM_WRITE_ADDR 0xAA - -/* -!------------------------------------------------------------------------------- -! PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI, -! assuming a 33MHz input clock to the 405EP from the C9531. -!------------------------------------------------------------------------------- -*/ -#define PLLMR0_DEFAULT PLLMR0_266_133_66 -#define PLLMR1_DEFAULT PLLMR1_266_133_66 - -#endif -/*----------------------------------------------------------------------------*/ - -/* - * Define here the location of the environment variables (FLASH or NVRAM). - * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only - * supported for backward compatibility. - */ -#if 1 -#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#else -#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */ -#endif - -/* - * Default environment variables - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_AMCC_DEF_ENV \ - CONFIG_AMCC_DEF_ENV_PPC \ - CONFIG_AMCC_DEF_ENV_NOR_UPD \ - "kernel_addr=fff80000\0" \ - "ramdisk_addr=fff90000\0" \ - "" - -#define CONFIG_PHY_ADDR 1 /* PHY address */ -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_PHY1_ADDR 2 /* EMAC1 PHY address */ - -#define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Bubinga */ - -/* - * Commands additional to the ones defined in amcc-common.h - */ -#define CONFIG_CMD_DATE -#define CONFIG_CMD_PCI -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - -#define CONFIG_SPD_EEPROM 1 /* use SPD EEPROM for setup */ - -/* - * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1. - * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31. - * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value. - * The Linux BASE_BAUD define should match this configuration. - * baseBaud = cpuClock/(uartDivisor*16) - * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, - * set Linux BASE_BAUD to 403200. - */ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ -#undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ -#define CONFIG_SYS_BASE_BAUD 691200 - -/*----------------------------------------------------------------------- - * I2C stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 - -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } /* avoid i2c probe hangup (?) */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */ - -#if defined(CONFIG_CMD_EEPROM) -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* I2C boot EEPROM (24C02W) */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -#endif - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ - -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - /* resource configuration */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ -#define CONFIG_SYS_PCI_CLASSCODE 0x0600 /* PCI Class Code: bridge/host */ -#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CONFIG_SYS_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */ -#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ -#define CONFIG_SYS_PCI_PTM2LA 0x00000000 /* disabled */ -#define CONFIG_SYS_PCI_PTM2MS 0x00000000 /* disabled */ -#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ - -/*----------------------------------------------------------------------- - * External peripheral base address - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_KEY_REG_BASE_ADDR 0xF0100000 -#define CONFIG_SYS_IR_REG_BASE_ADDR 0xF0200000 -#define CONFIG_SYS_FPGA_REG_BASE_ADDR 0xF0300000 - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - */ -#define CONFIG_SYS_SRAM_BASE 0xFFF00000 -#define CONFIG_SYS_SRAM_SIZE (256 << 10) -#define CONFIG_SYS_FLASH_BASE 0xFFF80000 - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_ADDR0 0x5555 -#define CONFIG_SYS_FLASH_ADDR1 0x2aaa -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#endif /* CONFIG_ENV_IS_IN_FLASH */ - -/*----------------------------------------------------------------------- - * NVRAM organization - */ -#define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */ -#define CONFIG_SYS_NVRAM_SIZE 0x1ff8 /* NVRAM size */ - -#ifdef CONFIG_ENV_IS_IN_NVRAM -#define CONFIG_ENV_SIZE 0x0ff8 /* Size of Environment vars */ -#define CONFIG_ENV_ADDR \ - (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) /* Env */ -#endif - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in data cache) - */ -/* use on chip memory ( OCM ) for temperary stack until sdram is tested */ -#define CONFIG_SYS_TEMP_STACK_OCM 1 - -/* On Chip Memory location */ -#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 -#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * External Bus Controller (EBC) Setup - */ - -/* Memory Bank 0 (Flash/SRAM) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x04006000 -#define CONFIG_SYS_EBC_PB0CR 0xFFF18000 /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit */ - -/* Memory Bank 1 (NVRAM/RTC) initialization */ -#define CONFIG_SYS_EBC_PB1AP 0x04041000 -#define CONFIG_SYS_EBC_PB1CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ - -/* Memory Bank 2 (not used) initialization */ -#define CONFIG_SYS_EBC_PB2AP 0x00000000 -#define CONFIG_SYS_EBC_PB2CR 0x00000000 - -/* Memory Bank 2 (not used) initialization */ -#define CONFIG_SYS_EBC_PB3AP 0x00000000 -#define CONFIG_SYS_EBC_PB3CR 0x00000000 - -/* Memory Bank 4 (FPGA regs) initialization */ -#define CONFIG_SYS_EBC_PB4AP 0x01815000 -#define CONFIG_SYS_EBC_PB4CR 0xF0318000 /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit */ - -/*----------------------------------------------------------------------- - * Definitions for Serial Presence Detect EEPROM address - * (to get SDRAM settings) - */ -#define SPD_EEPROM_ADDRESS 0x55 - -/*----------------------------------------------------------------------- - * Definitions for GPIO setup (PPC405EP specific) - * - * GPIO0[0] - External Bus Controller BLAST output - * GPIO0[1-9] - Instruction trace outputs - * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs - * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs - * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs - * GPIO0[24-27] - UART0 control signal inputs/outputs - * GPIO0[28-29] - UART1 data signal input/output - * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs - */ -#define CONFIG_SYS_GPIO0_OSRL 0x55555555 -#define CONFIG_SYS_GPIO0_OSRH 0x40000110 -#define CONFIG_SYS_GPIO0_ISR1L 0x00000000 -#define CONFIG_SYS_GPIO0_ISR1H 0x15555445 -#define CONFIG_SYS_GPIO0_TSRL 0x00000000 -#define CONFIG_SYS_GPIO0_TSRH 0x00000000 -#define CONFIG_SYS_GPIO0_TCR 0xFFFF8014 - -/*----------------------------------------------------------------------- - * Some BUBINGA stuff... - */ -#define NVRAM_BASE 0xF0000000 -#define FPGA_REG0 0xF0300000 /* FPGA Reg 0 */ -#define FPGA_REG1 0xF0300001 /* FPGA Reg 1 */ -#define NVRVFY1 0x4f532d4f /* used to determine if state data in */ -#define NVRVFY2 0x50454e00 /* NVRAM initialized (ascii for OS-OPEN)*/ - -#define FPGA_REG0_F_RANGE 0x80 /* SDRAM PLL freq range */ -#define FPGA_REG0_EXT_INT_DIS 0x20 /* External interface disable */ -#define FPGA_REG0_LED_MASK 0x07 /* Board LEDs DS9, DS10, and DS11 */ -#define FPGA_REG0_LED0 0x04 /* Turn on LED0 */ -#define FPGA_REG0_LED1 0x02 /* Turn on LED1 */ -#define FPGA_REG0_LED2 0x01 /* Turn on LED2 */ - -#define FPGA_REG1_SSPEC_DIS 0x80 /* C9531 Spread Spectrum disabled */ -#define FPGA_REG1_OFFBD_PCICLK 0x40 /* Onboard PCI clock selected */ -#define FPGA_REG1_CLOCK_MASK 0x30 /* Mask for C9531 output freq select */ -#define FPGA_REG1_CLOCK_BIT_SHIFT 4 -#define FPGA_REG1_PCI_INT_ARB 0x08 /* PCI Internal arbiter selected */ -#define FPGA_REG1_PCI_FREQ 0x04 /* PCI Frequency select */ -#define FPGA_REG1_OFFB_FLASH 0x02 /* Off board flash */ -#define FPGA_REG1_SRAM_BOOT 0x01 /* SRAM at 0xFFF80000 not Flash */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/ebony.h b/include/configs/ebony.h deleted file mode 100644 index 3f0ad69..0000000 --- a/include/configs/ebony.h +++ /dev/null @@ -1,174 +0,0 @@ -/* - * (C) Copyright 2002 Scott McNutt <smcnutt(a)artesyncp.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************ - * board/config_EBONY.h - configuration for AMCC 440GP Ref (Ebony) - ***********************************************************************/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_EBONY 1 /* Board is ebony */ -#define CONFIG_440GP 1 /* Specifc GP support */ -#define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ - -#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 - -/* - * Include common defines/options for all AMCC eval boards - */ -#define CONFIG_HOSTNAME ebony -#include "amcc-common.h" - -/* - * Define here the location of the environment variables (FLASH or NVRAM). - * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only - * supported for backward compatibility. - */ -#if 1 -#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#else -#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */ -#endif - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */ -#define CONFIG_SYS_FLASH_BASE 0xff800000 /* start of FLASH */ -#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ -#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ - -#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000) -#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08300000) - -/*----------------------------------------------------------------------- - * Initial RAM & stack pointer (placed in internal SRAM) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_EXT_SERIAL_CLOCK (1843200 * 6) /* Ext clk @ 11.059 MHz */ - -/*----------------------------------------------------------------------- - * NVRAM/RTC - * - * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located. - * The DS1743 code assumes this condition (i.e. -- it assumes the base - * address for the RTC registers is: - * - * CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - * - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs */ -#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */ - -#ifdef CONFIG_ENV_IS_IN_NVRAM -#define CONFIG_ENV_SIZE 0x1000 /* Size of Environment vars */ -#define CONFIG_ENV_ADDR \ - (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) -#endif /* CONFIG_ENV_IS_IN_NVRAM */ - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 32 /* sectors per device */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#define CONFIG_SYS_FLASH_ADDR0 0x5555 -#define CONFIG_SYS_FLASH_ADDR1 0x2aaa -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#endif /* CONFIG_ENV_IS_IN_FLASH */ - -/*----------------------------------------------------------------------- - * DDR SDRAM - *----------------------------------------------------------------------*/ -#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ -#define SPD_EEPROM_ADDRESS {0x53,0x52} /* SPD i2c spd addresses */ -#define CONFIG_PROG_SDRAM_TLB 1 /* setup SDRAM TLB's dynamically*/ - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 - -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* - * Default environment variables - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_AMCC_DEF_ENV \ - CONFIG_AMCC_DEF_ENV_POWERPC \ - CONFIG_AMCC_DEF_ENV_PPC_OLD \ - CONFIG_AMCC_DEF_ENV_NOR_UPD \ - "kernel_addr=ff800000\0" \ - "ramdisk_addr=ff810000\0" \ - "" - -#define CONFIG_PHY_ADDR 8 /* PHY address */ -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_PHY1_ADDR 9 /* EMAC1 PHY address */ - -/* - * Commands additional to the ones defined in amcc-common.h - */ -#define CONFIG_CMD_DATE -#define CONFIG_CMD_PCI -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -/* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */ - -/* Board-specific PCI */ -#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/katmai.h b/include/configs/katmai.h deleted file mode 100644 index fa72eb0..0000000 --- a/include/configs/katmai.h +++ /dev/null @@ -1,324 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * (C) Copyright 2004 Paul Reynolds <PaulReynolds(a)lhsolutions.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************ - * katmai.h - configuration for AMCC Katmai (440SPe) - ***********************************************************************/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_KATMAI 1 /* Board is Katmai */ -#define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_440SPE 1 /* Specifc SPe support */ -#define CONFIG_440SPE_REVA 1 /* Support old Rev A. */ -#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ -#define CONFIG_SYS_4xx_RESET_TYPE 0x2 /* use chip reset on this board */ - -#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 - -/* - * Enable this board for more than 2GB of SDRAM - */ -#define CONFIG_PHYS_64BIT -#define CONFIG_VERY_BIG_RAM - -/* - * Include common defines/options for all AMCC eval boards - */ -#define CONFIG_HOSTNAME katmai -#include "amcc-common.h" - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#undef CONFIG_SHOW_BOOT_PROGRESS - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH */ -#define CONFIG_SYS_ISRAM_BASE 0x90000000 /* internal SRAM */ - -#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped PCI memory */ -#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ -#define CONFIG_SYS_PCI_TARGBASE CONFIG_SYS_PCI_MEMBASE - -#define CONFIG_SYS_PCIE_MEMBASE 0xb0000000 /* mapped PCIe memory */ -#define CONFIG_SYS_PCIE_MEMSIZE 0x08000000 /* smallest incr for PCIe port */ -#define CONFIG_SYS_PCIE_BASE 0xe0000000 /* PCIe UTL regs */ - -#define CONFIG_SYS_PCIE0_CFGBASE 0xc0000000 -#define CONFIG_SYS_PCIE1_CFGBASE 0xc1000000 -#define CONFIG_SYS_PCIE2_CFGBASE 0xc2000000 -#define CONFIG_SYS_PCIE0_XCFGBASE 0xc3000000 -#define CONFIG_SYS_PCIE1_XCFGBASE 0xc3001000 -#define CONFIG_SYS_PCIE2_XCFGBASE 0xc3002000 - -/* base address of inbound PCIe window */ -#define CONFIG_SYS_PCIE_INBOUND_BASE 0x0000000000000000ULL - -/* System RAM mapped to PCI space */ -#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE -#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE -#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) - -#define CONFIG_SYS_ACE_BASE 0xfe000000 /* Xilinx ACE controller - Compact Flash */ - -/*----------------------------------------------------------------------- - * Initial RAM & stack pointer (placed in internal SRAM) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_TEMP_STACK_OCM 1 -#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#undef CONFIG_SYS_EXT_SERIAL_CLOCK - -/*----------------------------------------------------------------------- - * DDR SDRAM - *----------------------------------------------------------------------*/ -#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ -#define SPD_EEPROM_ADDRESS {0x51, 0x52} /* SPD i2c spd addresses*/ -#define CONFIG_DDR_ECC 1 /* with ECC support */ -#define CONFIG_DDR_RQDC_FIXED 0x80000038 /* optimal value found by GDA*/ -#undef CONFIG_STRESS - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 - -#define CONFIG_SYS_SPD_BUS_NUM 0 /* The I2C bus for SPD */ - -#define IIC0_BOOTPROM_ADDR 0x50 -#define IIC0_ALT_BOOTPROM_ADDR 0x54 - -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_EEPROM_ADDR (0x50) -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* I2C bootstrap EEPROM */ -#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x50 -#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 -#define CONFIG_4xx_CONFIG_BLOCKSIZE 8 - -/* I2C RTC */ -#define CONFIG_RTC_M41T11 1 -#define CONFIG_SYS_RTC_BUS_NUM 1 /* The I2C bus for RTC */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* play along with linux */ - -/* I2C DTT */ -#define CONFIG_DTT_ADM1021 1 /* ADM1021 temp sensor support */ -#define CONFIG_SYS_DTT_BUS_NUM 1 /* The I2C bus for DTT */ -/* - * standard dtt sensor configuration - bottom bit will determine local or - * remote sensor of the ADM1021, the rest determines index into - * CONFIG_SYS_DTT_ADM1021 array below. - */ -#define CONFIG_DTT_SENSORS { 0, 1 } - -/* - * ADM1021 temp sensor configuration (see dtt/adm1021.c for details). - * there will be one entry in this array for each two (dummy) sensors in - * CONFIG_DTT_SENSORS. - * - * For Katmai board: - * - only one ADM1021 - * - i2c addr 0x18 - * - conversion rate 0x02 = 0.25 conversions/second - * - ALERT ouput disabled - * - local temp sensor enabled, min set to 0 deg, max set to 85 deg - * - remote temp sensor enabled, min set to 0 deg, max set to 85 deg - */ -#define CONFIG_SYS_DTT_ADM1021 { { 0x18, 0x02, 0, 1, 0, 85, 1, 0, 58} } - -/*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment uses flash */ - -/* - * Default environment variables - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_AMCC_DEF_ENV \ - CONFIG_AMCC_DEF_ENV_POWERPC \ - CONFIG_AMCC_DEF_ENV_NOR_UPD \ - "kernel_addr=ff000000\0" \ - "fdt_addr=ff1e0000\0" \ - "ramdisk_addr=ff200000\0" \ - "pciconfighost=1\0" \ - "pcie_mode=RP:RP:RP\0" \ - "" - -/* - * Commands additional to the ones defined in amcc-common.h - */ -#define CONFIG_CMD_CHIP_CONFIG -#define CONFIG_CMD_DATE -#define CONFIG_CMD_ECCTEST -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_PCI -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - -#define CONFIG_IBM_EMAC4_V4 1 /* 440SPe has this EMAC version */ -#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ -#define CONFIG_HAS_ETH0 -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_PHY_RESET_DELAY 1000 -#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */ -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ - -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -/* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ -#define CONFIG_PCI_CONFIG_HOST_BRIDGE - -/* Board-specific PCI */ -#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */ -#undef CONFIG_SYS_PCI_MASTER_INIT - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ -/* #define CONFIG_SYS_PCI_SUBSYS_ID CONFIG_SYS_PCI_SUBSYS_DEVICEID */ - -/* - * NETWORK Support (PCI): - */ -/* Support for Intel 82557/82559/82559ER chips. */ -#define CONFIG_EEPRO100 - -/*----------------------------------------------------------------------- - * Xilinx System ACE support - *----------------------------------------------------------------------*/ -#define CONFIG_SYSTEMACE 1 /* Enable SystemACE support */ -#define CONFIG_SYS_SYSTEMACE_WIDTH 16 /* Data bus width is 16 */ -#define CONFIG_SYS_SYSTEMACE_BASE CONFIG_SYS_ACE_BASE -#define CONFIG_DOS_PARTITION 1 - -/*----------------------------------------------------------------------- - * External Bus Controller (EBC) Setup - *----------------------------------------------------------------------*/ - -/* Memory Bank 0 (Flash) initialization */ -#define CONFIG_SYS_EBC_PB0AP (EBC_BXAP_BME_DISABLED | \ - EBC_BXAP_TWT_ENCODE(7) | \ - EBC_BXAP_BCE_DISABLE | \ - EBC_BXAP_BCT_2TRANS | \ - EBC_BXAP_CSN_ENCODE(0) | \ - EBC_BXAP_OEN_ENCODE(0) | \ - EBC_BXAP_WBN_ENCODE(0) | \ - EBC_BXAP_WBF_ENCODE(0) | \ - EBC_BXAP_TH_ENCODE(0) | \ - EBC_BXAP_RE_DISABLED | \ - EBC_BXAP_SOR_DELAYED | \ - EBC_BXAP_BEM_WRITEONLY | \ - EBC_BXAP_PEN_DISABLED) -#define CONFIG_SYS_EBC_PB0CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | \ - EBC_BXCR_BS_16MB | \ - EBC_BXCR_BU_RW | \ - EBC_BXCR_BW_16BIT) - -/* Memory Bank 1 (Xilinx System ACE controller) initialization */ -#define CONFIG_SYS_EBC_PB1AP (EBC_BXAP_BME_DISABLED | \ - EBC_BXAP_TWT_ENCODE(4) | \ - EBC_BXAP_BCE_DISABLE | \ - EBC_BXAP_BCT_2TRANS | \ - EBC_BXAP_CSN_ENCODE(0) | \ - EBC_BXAP_OEN_ENCODE(0) | \ - EBC_BXAP_WBN_ENCODE(0) | \ - EBC_BXAP_WBF_ENCODE(0) | \ - EBC_BXAP_TH_ENCODE(0) | \ - EBC_BXAP_RE_DISABLED | \ - EBC_BXAP_SOR_NONDELAYED | \ - EBC_BXAP_BEM_WRITEONLY | \ - EBC_BXAP_PEN_DISABLED) -#define CONFIG_SYS_EBC_PB1CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_ACE_BASE) | \ - EBC_BXCR_BS_1MB | \ - EBC_BXCR_BU_RW | \ - EBC_BXCR_BW_16BIT) - -/*------------------------------------------------------------------------- - * Initialize EBC CONFIG - - * Keep the Default value, but the bit PDT which has to be set to 1 ?TBC - * default value : 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000 - *-------------------------------------------------------------------------*/ -#define CONFIG_SYS_EBC_CFG (EBC_CFG_LE_UNLOCK | \ - EBC_CFG_PTD_ENABLE | \ - EBC_CFG_RTC_16PERCLK | \ - EBC_CFG_ATC_PREVIOUS | \ - EBC_CFG_DTC_PREVIOUS | \ - EBC_CFG_CTC_PREVIOUS | \ - EBC_CFG_OEO_PREVIOUS | \ - EBC_CFG_EMC_DEFAULT | \ - EBC_CFG_PME_DISABLE | \ - EBC_CFG_PR_16) - -/*----------------------------------------------------------------------- - * GPIO Setup - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_GPIO_PCIE_PRESENT0 17 -#define CONFIG_SYS_GPIO_PCIE_PRESENT1 21 -#define CONFIG_SYS_GPIO_PCIE_PRESENT2 23 -#define CONFIG_SYS_GPIO_RS232_FORCEOFF 30 - -#define CONFIG_SYS_PFC0 (GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT0) | \ - GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT1) | \ - GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT2) | \ - GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF)) -#define CONFIG_SYS_GPIO_OR GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF) -#define CONFIG_SYS_GPIO_TCR GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF) -#define CONFIG_SYS_GPIO_ODR 0 - -#endif /* __CONFIG_H */ diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h deleted file mode 100644 index 1990b2d..0000000 --- a/include/configs/kilauea.h +++ /dev/null @@ -1,534 +0,0 @@ -/* - * Copyright (c) 2008 Nuovation System Designs, LLC - * Grant Erickson <gerickson(a)nuovations.com> - * - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************ - * kilauea.h - configuration for AMCC Kilauea (405EX) - ***********************************************************************/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_KILAUEA 1 /* Board is Kilauea */ -#define CONFIG_405EX 1 /* Specifc 405EX support*/ -#define CONFIG_SYS_CLK_FREQ 33333333 /* ext frequency to pll */ - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 -#endif - -/* - * CHIP_21 errata - you must set this to match your exact CPU, else your - * board will not boot. DO NOT enable this unless you have JTAG available - * for recovery, in the event you get it wrong. - * - * Kilauea uses the 405EX, while Haleakala uses the 405EXr. Either board - * may be equipped for security or not. You must look at the CPU part - * number to be sure what you have. - */ -/* #define CONFIG_SYS_4xx_CHIP_21_405EX_NO_SECURITY */ -/* #define CONFIG_SYS_4xx_CHIP_21_405EX_SECURITY */ -/* #define CONFIG_SYS_4xx_CHIP_21_405EXr_NO_SECURITY */ -/* #define CONFIG_SYS_4xx_CHIP_21_405EXr_SECURITY */ - -/* - * Include common defines/options for all AMCC eval boards - */ -#define CONFIG_HOSTNAME kilauea -#include "amcc-common.h" - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ -#define CONFIG_BOARD_TYPES -#define CONFIG_BOARD_EMAC_COUNT - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_BASE 0xFC000000 -#define CONFIG_SYS_NAND_ADDR 0xF8000000 -#define CONFIG_SYS_FPGA_BASE 0xF0000000 - -/*----------------------------------------------------------------------- - * Initial RAM & Stack Pointer Configuration Options - * - * There are traditionally three options for the primordial - * (i.e. initial) stack usage on the 405-series: - * - * 1) On-chip Memory (OCM) (i.e. SRAM) - * 2) Data cache - * 3) SDRAM - * - * For the 405EX(r), there is no OCM, so we are left with (2) or (3) - * the latter of which is less than desireable since it requires - * setting up the SDRAM and ECC in assembly code. - * - * To use (2), define 'CONFIG_SYS_INIT_DCACHE_CS' to be an unused chip - * select on the External Bus Controller (EBC) and then select a - * value for 'CONFIG_SYS_INIT_RAM_ADDR' outside of the range of valid, - * physical SDRAM. Otherwise, undefine 'CONFIG_SYS_INIT_DCACHE_CS' and - * select a value for 'CONFIG_SYS_INIT_RAM_ADDR' within the range of valid, - * physical SDRAM to use (3). - *-----------------------------------------------------------------------*/ - -#define CONFIG_SYS_INIT_DCACHE_CS 4 - -#if defined(CONFIG_SYS_INIT_DCACHE_CS) -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + ( 1 << 30)) /* 1 GiB */ -#else -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + (32 << 20)) /* 32 MiB */ -#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */ - -#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) /* 4 KiB */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -/* - * If the data cache is being used for the primordial stack and global - * data area, the POST word must be placed somewhere else. The General - * Purpose Timer (GPT) is unused by u-boot and the kernel and preserves - * its compare and mask register contents across reset, so it is used - * for the POST word. - */ - -#if defined(CONFIG_SYS_INIT_DCACHE_CS) -# define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -# define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6) -#else -# define CONFIG_SYS_INIT_EXTRA_SIZE 16 -# define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_EXTRA_SIZE) -# define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_INIT_RAM_ADDR -#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */ - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ - -/*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ - -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#endif /* CONFIG_ENV_IS_IN_FLASH */ - -/*----------------------------------------------------------------------- - * NAND FLASH - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS) -#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ - -/*----------------------------------------------------------------------- - * DDR SDRAM - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MBYTES_SDRAM (256) /* 256MB */ - -/* - * CONFIG_PPC4xx_DDR_AUTOCALIBRATION - * - * Note: DDR Autocalibration Method_A scans the full range of possible PPC4xx - * SDRAM Controller DDR autocalibration values and takes a lot longer - * to run than Method_B. - * (See the Method_A and Method_B algorithm discription in the file: - * arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c) - * Define CONFIG_PPC4xx_DDR_METHOD_A to use DDR autocalibration Method_A - * - * DDR Autocalibration Method_B is the default. - */ -#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */ -#define DEBUG_PPC4xx_DDR_AUTOCALIBRATION /* dynamic DDR autocal debug */ -#undef CONFIG_PPC4xx_DDR_METHOD_A - -#define CONFIG_SYS_SDRAM0_MB0CF_BASE (( 0 << 20) + CONFIG_SYS_SDRAM_BASE) - -/* DDR1/2 SDRAM Device Control Register Data Values */ -#define CONFIG_SYS_SDRAM0_MB0CF ((CONFIG_SYS_SDRAM0_MB0CF_BASE >> 3) | \ - SDRAM_RXBAS_SDSZ_256MB | \ - SDRAM_RXBAS_SDAM_MODE7 | \ - SDRAM_RXBAS_SDBE_ENABLE) -#define CONFIG_SYS_SDRAM0_MB1CF SDRAM_RXBAS_SDBE_DISABLE -#define CONFIG_SYS_SDRAM0_MB2CF SDRAM_RXBAS_SDBE_DISABLE -#define CONFIG_SYS_SDRAM0_MB3CF SDRAM_RXBAS_SDBE_DISABLE -#define CONFIG_SYS_SDRAM0_MCOPT1 (SDRAM_MCOPT1_PMU_OPEN | \ - SDRAM_MCOPT1_8_BANKS | \ - SDRAM_MCOPT1_DDR2_TYPE | \ - SDRAM_MCOPT1_QDEP | \ - SDRAM_MCOPT1_DCOO_DISABLED) -#define CONFIG_SYS_SDRAM0_MCOPT2 0x00000000 -#define CONFIG_SYS_SDRAM0_MODT0 (SDRAM_MODT_EB0W_ENABLE | \ - SDRAM_MODT_EB0R_ENABLE) -#define CONFIG_SYS_SDRAM0_MODT1 0x00000000 -#define CONFIG_SYS_SDRAM0_CODT (SDRAM_CODT_RK0R_ON | \ - SDRAM_CODT_CKLZ_36OHM | \ - SDRAM_CODT_DQS_1_8_V_DDR2 | \ - SDRAM_CODT_IO_NMODE) -#define CONFIG_SYS_SDRAM0_RTR SDRAM_RTR_RINT_ENCODE(1560) -#define CONFIG_SYS_SDRAM0_INITPLR0 (SDRAM_INITPLR_ENABLE | \ - SDRAM_INITPLR_IMWT_ENCODE(80) | \ - SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_NOP)) -#define CONFIG_SYS_SDRAM0_INITPLR1 (SDRAM_INITPLR_ENABLE | \ - SDRAM_INITPLR_IMWT_ENCODE(3) | \ - SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE) | \ - SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \ - SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL)) -#define CONFIG_SYS_SDRAM0_INITPLR2 (SDRAM_INITPLR_ENABLE | \ - SDRAM_INITPLR_IMWT_ENCODE(2) | \ - SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ - SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR2) | \ - SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR2_TEMP_COMMERCIAL)) -#define CONFIG_SYS_SDRAM0_INITPLR3 (SDRAM_INITPLR_ENABLE | \ - SDRAM_INITPLR_IMWT_ENCODE(2) | \ - SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ - SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR3) | \ - SDRAM_INITPLR_IMA_ENCODE(0)) -#define CONFIG_SYS_SDRAM0_INITPLR4 (SDRAM_INITPLR_ENABLE | \ - SDRAM_INITPLR_IMWT_ENCODE(2) | \ - SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ - SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \ - SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_DQS_DISABLE | \ - JEDEC_MA_EMR_RTT_75OHM)) -#define CONFIG_SYS_SDRAM0_INITPLR5 (SDRAM_INITPLR_ENABLE | \ - SDRAM_INITPLR_IMWT_ENCODE(2) | \ - SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ - SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \ - SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \ - JEDEC_MA_MR_CL_DDR2_4_0_CLK | \ - JEDEC_MA_MR_BLEN_4 | \ - JEDEC_MA_MR_DLL_RESET)) -#define CONFIG_SYS_SDRAM0_INITPLR6 (SDRAM_INITPLR_ENABLE | \ - SDRAM_INITPLR_IMWT_ENCODE(3) | \ - SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE) | \ - SDRAM_INITPLR_IBA_ENCODE(0x0) | \ - SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL)) -#define CONFIG_SYS_SDRAM0_INITPLR7 (SDRAM_INITPLR_ENABLE | \ - SDRAM_INITPLR_IMWT_ENCODE(26) | \ - SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH)) -#define CONFIG_SYS_SDRAM0_INITPLR8 (SDRAM_INITPLR_ENABLE | \ - SDRAM_INITPLR_IMWT_ENCODE(26) | \ - SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH)) -#define CONFIG_SYS_SDRAM0_INITPLR9 (SDRAM_INITPLR_ENABLE | \ - SDRAM_INITPLR_IMWT_ENCODE(26) | \ - SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH)) -#define CONFIG_SYS_SDRAM0_INITPLR10 (SDRAM_INITPLR_ENABLE | \ - SDRAM_INITPLR_IMWT_ENCODE(26) | \ - SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH)) -#define CONFIG_SYS_SDRAM0_INITPLR11 (SDRAM_INITPLR_ENABLE | \ - SDRAM_INITPLR_IMWT_ENCODE(2) | \ - SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ - SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \ - SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \ - JEDEC_MA_MR_CL_DDR2_4_0_CLK | \ - JEDEC_MA_MR_BLEN_4)) -#define CONFIG_SYS_SDRAM0_INITPLR12 (SDRAM_INITPLR_ENABLE | \ - SDRAM_INITPLR_IMWT_ENCODE(2) | \ - SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ - SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \ - SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_ENTER | \ - JEDEC_MA_EMR_RDQS_DISABLE | \ - JEDEC_MA_EMR_DQS_DISABLE | \ - JEDEC_MA_EMR_RTT_DISABLED | \ - JEDEC_MA_EMR_ODS_NORMAL)) -#define CONFIG_SYS_SDRAM0_INITPLR13 (SDRAM_INITPLR_ENABLE | \ - SDRAM_INITPLR_IMWT_ENCODE(2) | \ - SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ - SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \ - SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_EXIT | \ - JEDEC_MA_EMR_RDQS_DISABLE | \ - JEDEC_MA_EMR_DQS_DISABLE | \ - JEDEC_MA_EMR_RTT_DISABLED | \ - JEDEC_MA_EMR_ODS_NORMAL)) -#define CONFIG_SYS_SDRAM0_INITPLR14 (SDRAM_INITPLR_DISABLE) -#define CONFIG_SYS_SDRAM0_INITPLR15 (SDRAM_INITPLR_DISABLE) -#define CONFIG_SYS_SDRAM0_RQDC (SDRAM_RQDC_RQDE_ENABLE | \ - SDRAM_RQDC_RQFD_ENCODE(56)) -#define CONFIG_SYS_SDRAM0_RFDC SDRAM_RFDC_RFFD_ENCODE(521) -#define CONFIG_SYS_SDRAM0_RDCC (SDRAM_RDCC_RDSS_T2) -#define CONFIG_SYS_SDRAM0_DLCR (SDRAM_DLCR_DCLM_AUTO | \ - SDRAM_DLCR_DLCS_CONT_DONE | \ - SDRAM_DLCR_DLCV_ENCODE(165)) -#define CONFIG_SYS_SDRAM0_CLKTR (SDRAM_CLKTR_CLKP_180_DEG_ADV) -#define CONFIG_SYS_SDRAM0_WRDTR 0x00000000 -#define CONFIG_SYS_SDRAM0_SDTR1 (SDRAM_SDTR1_LDOF_2_CLK | \ - SDRAM_SDTR1_RTW_2_CLK | \ - SDRAM_SDTR1_RTRO_1_CLK) -#define CONFIG_SYS_SDRAM0_SDTR2 (SDRAM_SDTR2_RCD_3_CLK | \ - SDRAM_SDTR2_WTR_2_CLK | \ - SDRAM_SDTR2_XSNR_32_CLK | \ - SDRAM_SDTR2_WPC_4_CLK | \ - SDRAM_SDTR2_RPC_2_CLK | \ - SDRAM_SDTR2_RP_3_CLK | \ - SDRAM_SDTR2_RRD_2_CLK) -#define CONFIG_SYS_SDRAM0_SDTR3 (SDRAM_SDTR3_RAS_ENCODE(8) | \ - SDRAM_SDTR3_RC_ENCODE(11) | \ - SDRAM_SDTR3_XCS | \ - SDRAM_SDTR3_RFC_ENCODE(26)) -#define CONFIG_SYS_SDRAM0_MMODE (SDRAM_MMODE_WR_DDR2_3_CYC | \ - SDRAM_MMODE_DCL_DDR2_4_0_CLK | \ - SDRAM_MMODE_BLEN_4) -#define CONFIG_SYS_SDRAM0_MEMODE (SDRAM_MEMODE_DQS_DISABLE | \ - SDRAM_MEMODE_RTT_75OHM) - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* I2C boot EEPROM (24C02BN) */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* I2C bootstrap EEPROM */ -#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x52 -#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 -#define CONFIG_4xx_CONFIG_BLOCKSIZE 16 - -/* Standard DTT sensor configuration */ -#define CONFIG_DTT_DS1775 1 -#define CONFIG_DTT_SENSORS { 0 } -#define CONFIG_SYS_I2C_DTT_ADDR 0x48 - -/* RTC configuration */ -#define CONFIG_RTC_DS1338 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - -/*----------------------------------------------------------------------- - * Ethernet - *----------------------------------------------------------------------*/ -#define CONFIG_M88E1111_PHY 1 -#define CONFIG_IBM_EMAC4_V4 1 -#define CONFIG_EMAC_PHY_MODE EMAC_PHY_MODE_RGMII_RGMII -#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ - -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ - -#define CONFIG_HAS_ETH0 1 - -#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ -#define CONFIG_PHY1_ADDR 2 - -/* Debug messages for the DDR autocalibration */ -#define CONFIG_AUTOCALIB "silent\0" /* default is non-verbose */ - -/* - * Default environment variables - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_AMCC_DEF_ENV \ - CONFIG_AMCC_DEF_ENV_POWERPC \ - CONFIG_AMCC_DEF_ENV_PPC_OLD \ - CONFIG_AMCC_DEF_ENV_NOR_UPD \ - "logversion=2\0" \ - "kernel_addr=fc000000\0" \ - "fdt_addr=fc1e0000\0" \ - "ramdisk_addr=fc200000\0" \ - "pciconfighost=1\0" \ - "pcie_mode=RP:RP\0" \ - "" - -/* - * Commands additional to the ones defined in amcc-common.h - */ -#define CONFIG_CMD_CHIP_CONFIG -#define CONFIG_CMD_DATE -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PCI -#define CONFIG_CMD_SNTP - -#define CONFIG_SYS_POST_MEMORY_ON CONFIG_SYS_POST_MEMORY - -/* POST support */ -#define CONFIG_POST (CONFIG_SYS_POST_CACHE | \ - CONFIG_SYS_POST_CPU | \ - CONFIG_SYS_POST_ETHER | \ - CONFIG_SYS_POST_I2C | \ - CONFIG_SYS_POST_MEMORY_ON | \ - CONFIG_SYS_POST_UART) - -/* Define here the base-addresses of the UARTs to test in POST */ -#define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1, \ - CONFIG_SYS_NS16550_COM2 } - -#define CONFIG_LOGBUFFER -#define CONFIG_SYS_POST_CACHE_ADDR 0x00800000 /* free virtual address */ - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------*/ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ -#define CONFIG_PCI_CONFIG_HOST_BRIDGE - -/*----------------------------------------------------------------------- - * PCIe stuff - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_PCIE_MEMBASE 0x90000000 /* mapped PCIe memory */ -#define CONFIG_SYS_PCIE_MEMSIZE 0x08000000 /* 128 Meg, smallest incr per port */ - -#define CONFIG_SYS_PCIE0_CFGBASE 0xa0000000 /* remote access */ -#define CONFIG_SYS_PCIE0_XCFGBASE 0xb0000000 /* local access */ -#define CONFIG_SYS_PCIE0_CFGMASK 0xe0000001 /* 512 Meg */ - -#define CONFIG_SYS_PCIE1_CFGBASE 0xc0000000 /* remote access */ -#define CONFIG_SYS_PCIE1_XCFGBASE 0xd0000000 /* local access */ -#define CONFIG_SYS_PCIE1_CFGMASK 0xe0000001 /* 512 Meg */ - -#define CONFIG_SYS_PCIE0_UTLBASE 0xef502000 -#define CONFIG_SYS_PCIE1_UTLBASE 0xef503000 - -/* base address of inbound PCIe window */ -#define CONFIG_SYS_PCIE_INBOUND_BASE 0x0000000000000000ULL - -/*----------------------------------------------------------------------- - * External Bus Controller (EBC) Setup - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_NAND_CS 1 /* NAND chip connected to CSx */ - -/* Memory Bank 0 (NOR-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x05806500 -#define CONFIG_SYS_EBC_PB0CR 0xFC0DA000 /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit*/ - -/* Memory Bank 1 (NAND-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB1AP 0x018003c0 -#define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_NAND_ADDR | 0x1e000) - -/* Memory Bank 2 (FPGA) initialization */ -#define CONFIG_SYS_EBC_PB2AP (EBC_BXAP_BME_ENABLED | \ - EBC_BXAP_FWT_ENCODE(6) | \ - EBC_BXAP_BWT_ENCODE(1) | \ - EBC_BXAP_BCE_DISABLE | \ - EBC_BXAP_BCT_2TRANS | \ - EBC_BXAP_CSN_ENCODE(0) | \ - EBC_BXAP_OEN_ENCODE(0) | \ - EBC_BXAP_WBN_ENCODE(3) | \ - EBC_BXAP_WBF_ENCODE(1) | \ - EBC_BXAP_TH_ENCODE(4) | \ - EBC_BXAP_RE_DISABLED | \ - EBC_BXAP_SOR_DELAYED | \ - EBC_BXAP_BEM_WRITEONLY | \ - EBC_BXAP_PEN_DISABLED) -#define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_FPGA_BASE | 0x18000) - -#define CONFIG_SYS_EBC_CFG 0x7FC00000 /* EBC0_CFG */ - -/*----------------------------------------------------------------------- - * GPIO Setup - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ -{ \ -/* GPIO Core 0 */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO0 EBC_DATA_PAR(0) */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO1 EBC_DATA_PAR(1) */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO2 EBC_DATA_PAR(2) */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO3 EBC_DATA_PAR(3) */ \ -{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO4 EBC_DATA(20) USB2_DATA(4) */ \ -{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO5 EBC_DATA(21) USB2_DATA(5) */ \ -{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO6 EBC_DATA(22) USB2_DATA(6) */ \ -{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO7 EBC_DATA(23) USB2_DATA(7) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 CS(1)/NFCE(1) IRQ(7) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 CS(2)/NFCE(2) IRQ(8) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 CS(3)/NFCE(3) IRQ(9) */ \ -{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 IRQ(6) */ \ -{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO12 EBC_DATA(16) USB2_DATA(0) */ \ -{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO13 EBC_DATA(17) USB2_DATA(1) */ \ -{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO14 EBC_DATA(18) USB2_DATA(2) */ \ -{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO15 EBC_DATA(19) USB2_DATA(3) */ \ -{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 UART0_DCD UART1_CTS */ \ -{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 UART0_DSR UART1_RTS */ \ -{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 UART0_CTS */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 UART0_RTS */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO20 UART0_DTR UART1_TX */ \ -{GPIO0_BASE, GPIO_IN, GPIO_ALT2, GPIO_OUT_0}, /* GPIO21 UART0_RI UART1_RX */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO22 EBC_HOLD_REQ DMA_ACK2 */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO23 EBC_HOLD_ACK DMA_REQ2 */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO24 EBC_EXT_REQ DMA_EOT2 IRQ(4) */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO25 EBC_EXT_ACK DMA_ACK3 IRQ(3) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 EBC_ADDR(5) DMA_EOT0 TS(3) */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO27 EBC_BUS_REQ DMA_EOT3 IRQ(5) */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO28 */ \ -{GPIO0_BASE, GPIO_IN, GPIO_ALT2, GPIO_OUT_0}, /* GPIO29 DMA_EOT1 IRQ(2) */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO30 DMA_REQ1 IRQ(1) */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO31 DMA_ACK1 IRQ(0) */ \ -} \ -} - -/*----------------------------------------------------------------------- - * Some Kilauea stuff..., mainly fpga registers - */ -#define CONFIG_SYS_FPGA_REG_BASE CONFIG_SYS_FPGA_BASE -#define CONFIG_SYS_FPGA_FIFO_BASE (CONFIG_SYS_FPGA_BASE | (1 << 10)) - -/* interrupt */ -#define CONFIG_SYS_FPGA_SLIC0_R_DPRAM_INT 0x80000000 -#define CONFIG_SYS_FPGA_SLIC0_W_DPRAM_INT 0x40000000 -#define CONFIG_SYS_FPGA_SLIC1_R_DPRAM_INT 0x20000000 -#define CONFIG_SYS_FPGA_SLIC1_W_DPRAM_INT 0x10000000 -#define CONFIG_SYS_FPGA_PHY0_INT 0x08000000 -#define CONFIG_SYS_FPGA_PHY1_INT 0x04000000 -#define CONFIG_SYS_FPGA_SLIC0_INT 0x02000000 -#define CONFIG_SYS_FPGA_SLIC1_INT 0x01000000 - -/* DPRAM setting */ -/* 00: 32B; 01: 64B; 10: 128B; 11: 256B */ -#define CONFIG_SYS_FPGA_DPRAM_R_INT_LINE 0x00400000 /* 64 B */ -#define CONFIG_SYS_FPGA_DPRAM_W_INT_LINE 0x00100000 /* 64 B */ -#define CONFIG_SYS_FPGA_DPRAM_RW_TYPE 0x00080000 -#define CONFIG_SYS_FPGA_DPRAM_RST 0x00040000 -#define CONFIG_SYS_FPGA_UART0_FO 0x00020000 -#define CONFIG_SYS_FPGA_UART1_FO 0x00010000 - -/* loopback */ -#define CONFIG_SYS_FPGA_CHIPSIDE_LOOPBACK 0x00004000 -#define CONFIG_SYS_FPGA_LINESIDE_LOOPBACK 0x00008000 -#define CONFIG_SYS_FPGA_SLIC0_ENABLE 0x00002000 -#define CONFIG_SYS_FPGA_SLIC1_ENABLE 0x00001000 -#define CONFIG_SYS_FPGA_SLIC0_CS 0x00000800 -#define CONFIG_SYS_FPGA_SLIC1_CS 0x00000400 -#define CONFIG_SYS_FPGA_USER_LED0 0x00000200 -#define CONFIG_SYS_FPGA_USER_LED1 0x00000100 - -#define CONFIG_SYS_FPGA_MAGIC_MASK 0xffff0000 -#define CONFIG_SYS_FPGA_MAGIC 0xabcd0000 -#define CONFIG_SYS_FPGA_VER_MASK 0x0000ff00 - -#endif /* __CONFIG_H */ diff --git a/include/configs/luan.h b/include/configs/luan.h deleted file mode 100644 index 15e4a7e..0000000 --- a/include/configs/luan.h +++ /dev/null @@ -1,177 +0,0 @@ -/* - * (C) Copyright 2005 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * John Otken, jotken(a)softadvances.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************ - * luan.h - configuration for LUAN board - ***********************************************************************/ -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_LUAN 1 /* Board is Luan */ -#define CONFIG_440SP 1 /* Specific PPC440SP support */ -#define CONFIG_440 1 -#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ - -#define CONFIG_SYS_TEXT_BASE 0xFFFB0000 - -/* - * Include common defines/options for all AMCC eval boards - */ -#define CONFIG_HOSTNAME luan -#include "amcc-common.h" - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ -#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_LARGE_FLASH 0xffc00000 /* 4MB flash address CS0 */ -#define CONFIG_SYS_SMALL_FLASH 0xff900000 /* 1MB flash address CS2 */ -#define CONFIG_SYS_SRAM_BASE 0xff800000 /* 1MB SRAM address CS2 */ -#define CONFIG_SYS_SRAM_SIZE (1 << 20) -#define CONFIG_SYS_EPLD_BASE 0xff000000 /* EPLD and FRAM CS1 */ - -#define CONFIG_SYS_ISRAM_BASE 0xf8000000 /* internal 8k SRAM (L2 cache) */ - -#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ -#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */ - -#if CONFIG_SYS_LARGE_FLASH == 0xffc00000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_LARGE_FLASH -#else -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_SMALL_FLASH -#endif - -#if CONFIG_SYS_SRAM_BASE -#define CONFIG_SYS_KBYTES_SDRAM 1024*2 -#else -#define CONFIG_SYS_KBYTES_SDRAM 1024 -#endif - -/*----------------------------------------------------------------------- - * Initial RAM & stack pointer (placed in SDRAM) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE -#define CONFIG_SYS_INIT_RAM_SIZE (8 << 10) -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* external 11.059MHz clk */ - -/*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -/* - * Define here the location of the environment variables (FLASH or EEPROM). - * Note: DENX encourages to use redundant environment in FLASH. - */ -#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#define CONFIG_SYS_FLASH_ADDR0 0x555 -#define CONFIG_SYS_FLASH_ADDR1 0x2aa -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#endif /* CONFIG_ENV_IS_IN_FLASH */ - -/*----------------------------------------------------------------------- - * DDR SDRAM - *----------------------------------------------------------------------*/ -#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ -#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/ -#define CONFIG_DDR_ECC 1 /* with ECC support */ - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 - -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* - * Default environment variables - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_AMCC_DEF_ENV \ - CONFIG_AMCC_DEF_ENV_PPC \ - CONFIG_AMCC_DEF_ENV_NOR_UPD \ - "kernel_addr=fc000000\0" \ - "ramdisk_addr=fc100000\0" \ - "" - -#define CONFIG_HAS_ETH0 -#define CONFIG_PHY_ADDR 1 -#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */ -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ - -#ifdef DEBUG -#define CONFIG_PANIC_HANG -#else -#define CONFIG_HW_WATCHDOG /* watchdog */ -#endif - -/* - * Commands additional to the ones defined in amcc-common.h - */ -#define CONFIG_CMD_PCI -#define CONFIG_CMD_SDRAM - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#if defined(CONFIG_CMD_PCI) - -/* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_PNP /* do (not) pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -/* Board-specific PCI */ -#define CONFIG_SYS_PCI_TARGET_INIT -#undef CONFIG_SYS_PCI_MASTER_INIT - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x4403 /* whatever */ - -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/makalu.h b/include/configs/makalu.h deleted file mode 100644 index fd4c26e..0000000 --- a/include/configs/makalu.h +++ /dev/null @@ -1,345 +0,0 @@ -/* - * Copyright (c) 2008 Nuovation System Designs, LLC - * Grant Erickson <gerickson(a)nuovations.com> - * - * (C) Copyright 2007-2008 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************ - * makalu.h - configuration for AMCC Makalu (405EX) - ***********************************************************************/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_MAKALU 1 /* Board is Makalu */ -#define CONFIG_405EX 1 /* Specifc 405EX support*/ -#define CONFIG_SYS_CLK_FREQ 33330000 /* ext frequency to pll */ - -#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 - -/* - * Include common defines/options for all AMCC eval boards - */ -#define CONFIG_HOSTNAME makalu -#define CONFIG_ADDMISC "addmisc=setenv bootargs ${bootargs} rtc-x1205.probe=0,0x6f\0" -#include "amcc-common.h" - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_BASE 0xFC000000 -#define CONFIG_SYS_FPGA_BASE 0xF0000000 - -/*----------------------------------------------------------------------- - * Initial RAM & Stack Pointer Configuration Options - * - * There are traditionally three options for the primordial - * (i.e. initial) stack usage on the 405-series: - * - * 1) On-chip Memory (OCM) (i.e. SRAM) - * 2) Data cache - * 3) SDRAM - * - * For the 405EX(r), there is no OCM, so we are left with (2) or (3) - * the latter of which is less than desireable since it requires - * setting up the SDRAM and ECC in assembly code. - * - * To use (2), define 'CONFIG_SYS_INIT_DCACHE_CS' to be an unused chip - * select on the External Bus Controller (EBC) and then select a - * value for 'CONFIG_SYS_INIT_RAM_ADDR' outside of the range of valid, - * physical SDRAM. Otherwise, undefine 'CONFIG_SYS_INIT_DCACHE_CS' and - * select a value for 'CONFIG_SYS_INIT_RAM_ADDR' within the range of valid, - * physical SDRAM to use (3). - *-----------------------------------------------------------------------*/ - -#define CONFIG_SYS_INIT_DCACHE_CS 4 - -#if defined(CONFIG_SYS_INIT_DCACHE_CS) -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + ( 1 << 30)) /* 1 GiB */ -#else -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + (32 << 20)) /* 32 MiB */ -#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */ - -#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) /* 4 KiB */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -/* - * If the data cache is being used for the primordial stack and global - * data area, the POST word must be placed somewhere else. The General - * Purpose Timer (GPT) is unused by u-boot and the kernel and preserves - * its compare and mask register contents across reset, so it is used - * for the POST word. - */ - -#if defined(CONFIG_SYS_INIT_DCACHE_CS) -# define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -# define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6) -#else -# define CONFIG_SYS_INIT_EXTRA_SIZE 16 -# define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_EXTRA_SIZE) -# define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_INIT_RAM_ADDR -#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */ - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no ext. clk */ - -/*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ - -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#endif /* CONFIG_ENV_IS_IN_FLASH */ - -/*----------------------------------------------------------------------- - * DDR SDRAM - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MBYTES_SDRAM (256) /* 256MB */ - -#define CONFIG_SYS_SDRAM0_MB0CF_BASE (( 0 << 20) + CONFIG_SYS_SDRAM_BASE) -#define CONFIG_SYS_SDRAM0_MB1CF_BASE ((128 << 20) + CONFIG_SYS_SDRAM_BASE) - -/* DDR1/2 SDRAM Device Control Register Data Values */ -#define CONFIG_SYS_SDRAM0_MB0CF ((CONFIG_SYS_SDRAM0_MB0CF_BASE >> 3) | \ - SDRAM_RXBAS_SDSZ_128MB | \ - SDRAM_RXBAS_SDAM_MODE2 | \ - SDRAM_RXBAS_SDBE_ENABLE) -#define CONFIG_SYS_SDRAM0_MB1CF ((CONFIG_SYS_SDRAM0_MB1CF_BASE >> 3) | \ - SDRAM_RXBAS_SDSZ_128MB | \ - SDRAM_RXBAS_SDAM_MODE2 | \ - SDRAM_RXBAS_SDBE_ENABLE) -#define CONFIG_SYS_SDRAM0_MB2CF SDRAM_RXBAS_SDBE_DISABLE -#define CONFIG_SYS_SDRAM0_MB3CF SDRAM_RXBAS_SDBE_DISABLE -#define CONFIG_SYS_SDRAM0_MCOPT1 0x04322000 -#define CONFIG_SYS_SDRAM0_MCOPT2 0x00000000 -#define CONFIG_SYS_SDRAM0_MODT0 0x01800000 -#define CONFIG_SYS_SDRAM0_MODT1 0x00000000 -#define CONFIG_SYS_SDRAM0_CODT 0x0080f837 -#define CONFIG_SYS_SDRAM0_RTR 0x06180000 -#define CONFIG_SYS_SDRAM0_INITPLR0 0xa8380000 -#define CONFIG_SYS_SDRAM0_INITPLR1 0x81900400 -#define CONFIG_SYS_SDRAM0_INITPLR2 0x81020000 -#define CONFIG_SYS_SDRAM0_INITPLR3 0x81030000 -#define CONFIG_SYS_SDRAM0_INITPLR4 0x81010404 -#define CONFIG_SYS_SDRAM0_INITPLR5 0x81000542 -#define CONFIG_SYS_SDRAM0_INITPLR6 0x81900400 -#define CONFIG_SYS_SDRAM0_INITPLR7 0x8D080000 -#define CONFIG_SYS_SDRAM0_INITPLR8 0x8D080000 -#define CONFIG_SYS_SDRAM0_INITPLR9 0x8D080000 -#define CONFIG_SYS_SDRAM0_INITPLR10 0x8D080000 -#define CONFIG_SYS_SDRAM0_INITPLR11 0x81000442 -#define CONFIG_SYS_SDRAM0_INITPLR12 0x81010780 -#define CONFIG_SYS_SDRAM0_INITPLR13 0x81010400 -#define CONFIG_SYS_SDRAM0_INITPLR14 0x00000000 -#define CONFIG_SYS_SDRAM0_INITPLR15 0x00000000 -#define CONFIG_SYS_SDRAM0_RQDC 0x80000038 -#define CONFIG_SYS_SDRAM0_RFDC 0x00000209 -#define CONFIG_SYS_SDRAM0_RDCC 0x40000000 -#define CONFIG_SYS_SDRAM0_DLCR 0x030000a5 -#define CONFIG_SYS_SDRAM0_CLKTR 0x80000000 -#define CONFIG_SYS_SDRAM0_WRDTR 0x00000000 -#define CONFIG_SYS_SDRAM0_SDTR1 0x80201000 -#define CONFIG_SYS_SDRAM0_SDTR2 0x32204232 -#define CONFIG_SYS_SDRAM0_SDTR3 0x080b0d1a -#define CONFIG_SYS_SDRAM0_MMODE 0x00000442 -#define CONFIG_SYS_SDRAM0_MEMODE 0x00000404 - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 - -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* I2C boot EEPROM (24C02BN) */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ - -/* Standard DTT sensor configuration */ -#define CONFIG_DTT_DS1775 1 -#define CONFIG_DTT_SENSORS { 0 } -#define CONFIG_SYS_I2C_DTT_ADDR 0x48 - -/* RTC configuration */ -#define CONFIG_RTC_X1205 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x6f - -/*----------------------------------------------------------------------- - * Ethernet - *----------------------------------------------------------------------*/ -#define CONFIG_M88E1111_PHY 1 -#define CONFIG_IBM_EMAC4_V4 1 -#define CONFIG_EMAC_PHY_MODE EMAC_PHY_MODE_RGMII_RGMII -#define CONFIG_PHY_ADDR 6 /* PHY address, See schematics */ - -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ - -#define CONFIG_HAS_ETH0 1 - -#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ -#define CONFIG_PHY1_ADDR 0 - -/* - * Default environment variables - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_AMCC_DEF_ENV \ - CONFIG_AMCC_DEF_ENV_POWERPC \ - CONFIG_AMCC_DEF_ENV_PPC_OLD \ - CONFIG_AMCC_DEF_ENV_NOR_UPD \ - "kernel_addr=fc000000\0" \ - "fdt_addr=fc1e0000\0" \ - "ramdisk_addr=fc200000\0" \ - "pciconfighost=1\0" \ - "pcie_mode=RP:RP\0" \ - "" - -/* - * Commands additional to the ones defined in amcc-common.h - */ -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DTT -#define CONFIG_CMD_PCI -#define CONFIG_CMD_SNTP - -/* POST support */ -#define CONFIG_POST (CONFIG_SYS_POST_CACHE | \ - CONFIG_SYS_POST_CPU | \ - CONFIG_SYS_POST_ETHER | \ - CONFIG_SYS_POST_I2C | \ - CONFIG_SYS_POST_MEMORY | \ - CONFIG_SYS_POST_UART) - -/* Define here the base-addresses of the UARTs to test in POST */ -#define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1, \ - CONFIG_SYS_NS16550_COM2 } - -#define CONFIG_LOGBUFFER -#define CONFIG_SYS_POST_CACHE_ADDR 0x00800000 /* free virtual address */ - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------*/ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ -#define CONFIG_PCI_CONFIG_HOST_BRIDGE - -/*----------------------------------------------------------------------- - * PCIe stuff - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_PCIE_MEMBASE 0x90000000 /* mapped PCIe memory */ -#define CONFIG_SYS_PCIE_MEMSIZE 0x08000000 /* 128 Meg, smallest incr per port */ - -#define CONFIG_SYS_PCIE0_CFGBASE 0xa0000000 /* remote access */ -#define CONFIG_SYS_PCIE0_XCFGBASE 0xb0000000 /* local access */ -#define CONFIG_SYS_PCIE0_CFGMASK 0xe0000001 /* 512 Meg */ - -#define CONFIG_SYS_PCIE1_CFGBASE 0xc0000000 /* remote access */ -#define CONFIG_SYS_PCIE1_XCFGBASE 0xd0000000 /* local access */ -#define CONFIG_SYS_PCIE1_CFGMASK 0xe0000001 /* 512 Meg */ - -#define CONFIG_SYS_PCIE0_UTLBASE 0xef502000 -#define CONFIG_SYS_PCIE1_UTLBASE 0xef503000 - -/* base address of inbound PCIe window */ -#define CONFIG_SYS_PCIE_INBOUND_BASE 0x0000000000000000ULL - -/*----------------------------------------------------------------------- - * External Bus Controller (EBC) Setup - *----------------------------------------------------------------------*/ -/* Memory Bank 0 (NOR-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x08033700 -#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_FLASH_BASE | 0xda000) - -/* Memory Bank 2 (CPLD) initialization */ -#define CONFIG_SYS_EBC_PB2AP 0x9400C800 -#define CONFIG_SYS_EBC_PB2CR 0xF0018000 /* BAS=0x800,BS=1MB,BU=R/W,BW=8bit */ - -#define CONFIG_SYS_EBC_CFG 0x7FC00000 /* EBC0_CFG */ - -/*----------------------------------------------------------------------- - * GPIO Setup - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ -{ \ -/* GPIO Core 0 */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO0 EBC_DATA_PAR(0) */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO1 EBC_DATA_PAR(1) */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO2 EBC_DATA_PAR(2) */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO3 EBC_DATA_PAR(3) */ \ -{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO4 EBC_DATA(20) USB2_DATA(4) */ \ -{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO5 EBC_DATA(21) USB2_DATA(5) */ \ -{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO6 EBC_DATA(22) USB2_DATA(6) */ \ -{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO7 EBC_DATA(23) USB2_DATA(7) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 CS(1)/NFCE(1) IRQ(7) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 CS(2)/NFCE(2) IRQ(8) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 CS(3)/NFCE(3) IRQ(9) */ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 IRQ(6) */ \ -{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO12 EBC_DATA(16) USB2_DATA(0) */ \ -{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO13 EBC_DATA(17) USB2_DATA(1) */ \ -{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO14 EBC_DATA(18) USB2_DATA(2) */ \ -{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO15 EBC_DATA(19) USB2_DATA(3) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 UART0_DCD UART1_CTS */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 UART0_DSR UART1_RTS */ \ -{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 UART0_CTS */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 UART0_RTS */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO20 UART0_DTR UART1_TX */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO21 UART0_RI UART1_RX */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO22 EBC_HOLD_REQ DMA_ACK2 */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_0}, /* GPIO23 EBC_HOLD_ACK DMA_REQ2 */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO24 EBC_EXT_REQ DMA_EOT2 IRQ(4) */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO25 EBC_EXT_ACK DMA_ACK3 IRQ(3) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 EBC_ADDR(5) DMA_EOT0 TS(3) */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EBC_BUS_REQ DMA_EOT3 IRQ(5) */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL , GPIO_OUT_0}, /* GPIO28 */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO29 DMA_EOT1 IRQ(2) */ \ -{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO30 DMA_REQ1 IRQ(1) */ \ -{GPIO0_BASE, GPIO_IN, GPIO_ALT2, GPIO_OUT_0}, /* GPIO31 DMA_ACK1 IRQ(0) */ \ -} \ -} - -#define CONFIG_SYS_GPIO_PCIE_RST 23 -#define CONFIG_SYS_GPIO_PCIE_CLKREQ 27 -#define CONFIG_SYS_GPIO_PCIE_WAKE 28 - -#endif /* __CONFIG_H */ diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h deleted file mode 100644 index 4ff2f05..0000000 --- a/include/configs/ocotea.h +++ /dev/null @@ -1,194 +0,0 @@ -/* - * (C) Copyright 2004 Paul Reynolds <PaulReynolds(a)lhsolutions.com> - * - * (C) Copyright 2005 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************ - * 1 March 2004 Travis B. Sawyer <tsawyer(a)sandburst.com> - * Adapted to current Das U-Boot source - ***********************************************************************/ - - -/************************************************************************ - * OCOTEA.h - configuration for AMCC 440GX Ref (Ocotea) - ***********************************************************************/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_OCOTEA 1 /* Board is ebony */ -#define CONFIG_440GX 1 /* Specifc GX support */ -#define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ - -#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 - -/* - * Include common defines/options for all AMCC eval boards - */ -#define CONFIG_HOSTNAME ocotea -#include "amcc-common.h" - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_BASE 0xff800000 /* start of FLASH */ -#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ -#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ - -#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08300000) -#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000) - -/*----------------------------------------------------------------------- - * Initial RAM & stack pointer (placed in internal SRAM) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_TEMP_STACK_OCM 1 -#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_EXT_SERIAL_CLOCK (1843200 * 6) /* Ext clk @ 11.059 MHz */ - -/*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -/* - * Define here the location of the environment variables (FLASH or NVRAM). - * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only - * supported for backward compatibility. - */ -#if 1 -#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#else -#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */ -#endif - - -/*----------------------------------------------------------------------- - * NVRAM/RTC - * - * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located. - * The DS1743 code assumes this condition (i.e. -- it assumes the base - * address for the RTC registers is: - * - * CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - * - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs */ -#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */ - -#ifdef CONFIG_ENV_IS_IN_NVRAM -#define CONFIG_ENV_SIZE 0x1000 /* Size of Environment vars */ -#define CONFIG_ENV_ADDR \ - (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) -#endif /* CONFIG_ENV_IS_IN_NVRAM */ - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_ADDR0 0x5555 -#define CONFIG_SYS_FLASH_ADDR1 0x2aaa -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#endif /* CONFIG_ENV_IS_IN_FLASH */ - -/*----------------------------------------------------------------------- - * DDR SDRAM - *----------------------------------------------------------------------*/ -#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ -#define SPD_EEPROM_ADDRESS {0x53,0x52} /* SPD i2c spd addresses */ -#define CONFIG_PROG_SDRAM_TLB 1 /* setup SDRAM TLB's dynamically*/ - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 - -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* - * Default environment variables - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_AMCC_DEF_ENV \ - CONFIG_AMCC_DEF_ENV_PPC \ - CONFIG_AMCC_DEF_ENV_NOR_UPD \ - "kernel_addr=fff00000\0" \ - "ramdisk_addr=fff10000\0" \ - "" - -#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ -#define CONFIG_PHY1_ADDR 2 -#define CONFIG_PHY2_ADDR 0x10 -#define CONFIG_PHY3_ADDR 0x18 -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 -#define CONFIG_HAS_ETH3 -#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */ -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_PHY_RESET_DELAY 1000 - -/* - * Commands additional to the ones defined in amcc-common.h - */ -#define CONFIG_CMD_DATE -#define CONFIG_CMD_PCI -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -/* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */ - -/* Board-specific PCI */ -#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/redwood.h b/include/configs/redwood.h deleted file mode 100644 index 622b7c7..0000000 --- a/include/configs/redwood.h +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Configuration for AMCC 460SX Ref (redwood) - * - * (C) Copyright 2008 - * Feng Kan, Applied Micro Circuits Corp., fkan(a)amcc.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_440 1 /* ... PPC460 family */ -#define CONFIG_460SX 1 /* ... PPC460 family */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ - -#define CONFIG_SYS_TEXT_BASE 0xfffb0000 - -/*----------------------------------------------------------------------- - * Include common defines/options for all AMCC boards - *----------------------------------------------------------------------*/ -#define CONFIG_HOSTNAME redwood - -#include "amcc-common.h" - -#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_BASE 0xfff00000 /* start of FLASH */ -#define CONFIG_SYS_ISRAM_BASE 0x90000000 /* internal SRAM */ - -#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ - -#define CONFIG_SYS_PCIE_MEMBASE 0x90000000 /* mapped PCIe memory */ -#define CONFIG_SYS_PCIE0_MEMBASE 0x90000000 /* mapped PCIe memory */ -#define CONFIG_SYS_PCIE1_MEMBASE 0xa0000000 /* mapped PCIe memory */ -#define CONFIG_SYS_PCIE_MEMSIZE 0x01000000 - -#define CONFIG_SYS_PCIE0_XCFGBASE 0xb0000000 -#define CONFIG_SYS_PCIE1_XCFGBASE 0xb2000000 -#define CONFIG_SYS_PCIE2_XCFGBASE 0xb4000000 -#define CONFIG_SYS_PCIE0_CFGBASE 0xb6000000 -#define CONFIG_SYS_PCIE1_CFGBASE 0xb8000000 -#define CONFIG_SYS_PCIE2_CFGBASE 0xba000000 - -/* PCIe mapped UTL registers */ -#define CONFIG_SYS_PCIE0_REGBASE 0xd0000000 -#define CONFIG_SYS_PCIE1_REGBASE 0xd0010000 -#define CONFIG_SYS_PCIE2_REGBASE 0xd0020000 - -/* System RAM mapped to PCI space */ -#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE -#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE -#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) - -#define CONFIG_SYS_FPGA_BASE 0xe2000000 /* epld */ -#define CONFIG_SYS_OPER_FLASH 0xe7000000 /* SRAM - OPER Flash */ - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ - -/*----------------------------------------------------------------------- - * Initial RAM & stack pointer (placed in internal SRAM) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_TEMP_STACK_OCM 1 -#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) - -/*----------------------------------------------------------------------- - * DDR SDRAM - *----------------------------------------------------------------------*/ -#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ -#define CONFIG_DDR_ECC 1 /* with ECC support */ - -#define CONFIG_SYS_SPD_MAX_DIMMS 2 - -/* SPD i2c spd addresses */ -#define SPD_EEPROM_ADDRESS {IIC0_DIMM0_ADDR, IIC0_DIMM1_ADDR} -#define IIC0_DIMM0_ADDR 0x53 -#define IIC0_DIMM1_ADDR 0x52 - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 - -#define IIC0_BOOTPROM_ADDR 0x50 -#define IIC0_ALT_BOOTPROM_ADDR 0x54 - -/* Don't probe these addrs */ -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x50}, {0, 0x52}, {0, 0x53}, {0, 0x54} } - -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ - -/*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -#undef CONFIG_ENV_IS_IN_NVRAM /* ... not in NVRAM */ -#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment uses flash */ -#undef CONFIG_ENV_IS_IN_EEPROM /* ... not in EEPROM */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_AMCC_DEF_ENV \ - CONFIG_AMCC_DEF_ENV_POWERPC \ - CONFIG_AMCC_DEF_ENV_NOR_UPD \ - "kernel_addr=fc000000\0" \ - "fdt_addr=fc1e0000\0" \ - "ramdisk_addr=fc200000\0" \ - "" - -/*----------------------------------------------------------------------------+ -| Commands in addition to amcc-common.h -+----------------------------------------------------------------------------*/ -#define CONFIG_CMD_SDRAM - -#define CONFIG_BOOTCOMMAND "run flash_self" - -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_IBM_EMAC4_V4 1 -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_PHY_RESET_DELAY 1000 -#define CONFIG_M88E1141_PHY 1 /* Enable phy */ -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ - -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */ -#define CONFIG_PHY1_ADDR 1 /* PHY address, See schematics */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR 0xfffa0000 -#define CONFIG_ENV_SIZE 0x10000 /* Size of Environment vars */ -#endif /* CONFIG_ENV_IS_IN_FLASH */ - -/*---------------------------------------------------------------------------*/ - -#endif /* __CONFIG_H */ diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h deleted file mode 100644 index b6a5e6a..0000000 --- a/include/configs/sequoia.h +++ /dev/null @@ -1,435 +0,0 @@ -/* - * (C) Copyright 2006-2008 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * (C) Copyright 2006 - * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol(a)fr.ibm.com - * Alain Saurel, AMCC/IBM, alain.saurel(a)fr.ibm.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * sequoia.h - configuration for Sequoia & Rainier boards - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -/* This config file is used for Sequoia (440EPx) and Rainier (440GRx) */ -#ifndef CONFIG_RAINIER -#define CONFIG_440EPX 1 /* Specific PPC440EPx */ -#define CONFIG_HOSTNAME sequoia -#else -#define CONFIG_440GRX 1 /* Specific PPC440GRx */ -#define CONFIG_HOSTNAME rainier -#endif -#define CONFIG_440 1 /* ... PPC440 family */ - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFF80000 -#endif - -/* - * Include common defines/options for all AMCC eval boards - */ -#include "amcc-common.h" - -/* Detect Sequoia PLL input clock automatically via CPLD bit */ -#define CONFIG_SYS_CLK_FREQ ((in8(CONFIG_SYS_BCSR_BASE + 3) & 0x80) ? \ - 33333333 : 33000000) - -/* - * Define this if you want support for video console with radeon 9200 pci card - * Also set CONFIG_SYS_TEXT_BASE to 0xFFF80000 in board/amcc/sequoia/config.mk in this case - */ -#undef CONFIG_VIDEO - -#ifdef CONFIG_VIDEO -/* - * 44x dcache supported is working now on sequoia, but we don't enable - * it yet since it needs further testing - */ -#define CONFIG_4xx_DCACHE /* enable dcache */ -#endif - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ - -/* - * Base addresses -- Note these are effective addresses where the actual - * resources get mapped (not physical addresses). - */ -#define CONFIG_SYS_TLB_FOR_BOOT_FLASH 0x0003 -#define CONFIG_SYS_BOOT_BASE_ADDR 0xf0000000 -#define CONFIG_SYS_FLASH_BASE 0xfc000000 /* start of FLASH */ -#define CONFIG_SYS_NAND_ADDR 0xd0000000 /* NAND Flash */ -#define CONFIG_SYS_OCM_BASE 0xe0010000 /* ocm */ -#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_OCM_BASE -#define CONFIG_SYS_PCI_BASE 0xe0000000 /* Internal PCI regs */ -#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CONFIG_SYS_PCI_MEMBASE1 CONFIG_SYS_PCI_MEMBASE + 0x10000000 -#define CONFIG_SYS_PCI_MEMBASE2 CONFIG_SYS_PCI_MEMBASE1 + 0x10000000 -#define CONFIG_SYS_PCI_MEMBASE3 CONFIG_SYS_PCI_MEMBASE2 + 0x10000000 - -#define CONFIG_SYS_USB2D0_BASE 0xe0000100 -#define CONFIG_SYS_USB_DEVICE 0xe0000000 -#define CONFIG_SYS_USB_HOST 0xe0000400 -#define CONFIG_SYS_BCSR_BASE 0xc0000000 - -/* - * Initial RAM & stack pointer - */ -/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ -#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ - -/* - * Environment - */ -#if defined(CONFIG_SYS_RAMBOOT) -#define CONFIG_ENV_IS_NOWHERE /* Store env in memory only */ -#define CONFIG_ENV_SIZE (8 << 10) -/* - * In RAM-booting version, we have no environment storage. So we need to - * provide at least preliminary MAC addresses for the 4xx EMAC driver to - * register the interfaces. Those two addresses are generated via the - * tools/gen_eth_addr tool and should only be used in a closed laboratory - * environment. - */ -#define CONFIG_ETHADDR 4a:56:49:22:3e:43 -#define CONFIG_ETH1ADDR 02:93:53:d5:06:98 -#else -#define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environ vars */ -#endif - -#if defined(CONFIG_CMD_FLASH) -/* - * FLASH related - */ -#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ - -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protection */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR ((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#endif -#endif /* CONFIG_CMD_FLASH */ - -/* - * DDR SDRAM - */ -#define CONFIG_SYS_MBYTES_SDRAM (256) /* 256MB */ -#if !defined(CONFIG_SYS_RAMBOOT) -#define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ -#endif -#define CONFIG_SYS_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */ - /* 440EPx errata CHIP 11 */ - -/* - * I2C - */ -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 - -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* I2C bootstrap EEPROM */ -#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x52 -#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 -#define CONFIG_4xx_CONFIG_BLOCKSIZE 16 - -/* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_AD7414 1 /* use AD7414 */ -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 70 -#define CONFIG_SYS_DTT_LOW_TEMP -30 -#define CONFIG_SYS_DTT_HYSTERESIS 3 - -/* - * Default environment variables - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_AMCC_DEF_ENV \ - CONFIG_AMCC_DEF_ENV_POWERPC \ - CONFIG_AMCC_DEF_ENV_PPC_OLD \ - CONFIG_AMCC_DEF_ENV_NOR_UPD \ - "kernel_addr=FC000000\0" \ - "ramdisk_addr=FC180000\0" \ - "" - -#define CONFIG_M88E1111_PHY 1 -#define CONFIG_IBM_EMAC4_V4 1 -#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */ - -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ - -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ -#define CONFIG_PHY1_ADDR 1 - -/* USB */ -#ifdef CONFIG_440EPX - -#undef CONFIG_USB_EHCI /* OHCI by default */ - -#ifdef CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_PPC4XX -#define CONFIG_SYS_PPC4XX_USB_ADDR 0xe0000300 -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_EHCI_MMIO_BIG_ENDIAN -#define CONFIG_EHCI_DESC_BIG_ENDIAN -#else /* CONFIG_USB_EHCI */ -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_OHCI_BE_CONTROLLER - -#undef CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE CONFIG_SYS_USB_HOST -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "ppc440" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 -#endif - -#define CONFIG_USB_STORAGE -/* Comment this out to enable USB 1.1 device */ -#define USB_2_0_DEVICE - -#endif /* CONFIG_440EPX */ - -/* Partitions */ -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION -#define CONFIG_ISO_PARTITION - -/* - * Commands additional to the ones defined in amcc-common.h - */ -#define CONFIG_CMD_CHIP_CONFIG -#define CONFIG_CMD_DTT -#define CONFIG_CMD_FAT -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PCI -#define CONFIG_CMD_SDRAM - -#ifdef CONFIG_440EPX -#define CONFIG_CMD_USB -#endif - -#ifndef CONFIG_RAINIER -#define CONFIG_SYS_POST_FPU_ON CONFIG_SYS_POST_FPU -#else -#define CONFIG_SYS_POST_FPU_ON 0 -#endif - -/* - * Don't run the memory POST on the NAND-booting version. It will - * overwrite part of the U-Boot image which is already loaded from NAND - * to SDRAM. - */ -#if defined(CONFIG_SYS_RAMBOOT) -#define CONFIG_SYS_POST_MEMORY_ON 0 -#else -#define CONFIG_SYS_POST_MEMORY_ON CONFIG_SYS_POST_MEMORY -#endif - -/* POST support */ -#define CONFIG_POST (CONFIG_SYS_POST_CACHE | \ - CONFIG_SYS_POST_CPU | \ - CONFIG_SYS_POST_ETHER | \ - CONFIG_SYS_POST_FPU_ON | \ - CONFIG_SYS_POST_I2C | \ - CONFIG_SYS_POST_MEMORY_ON | \ - CONFIG_SYS_POST_SPR | \ - CONFIG_SYS_POST_UART) - -#define CONFIG_LOGBUFFER -#define CONFIG_SYS_POST_CACHE_ADDR 0x7fff0000 /* free virtual address */ - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ - -#define CONFIG_SUPPORT_VFAT - -/* - * PCI stuff - */ -/* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to */ - /* CONFIG_SYS_PCI_MEMBASE */ -/* Board-specific PCI */ -#define CONFIG_SYS_PCI_TARGET_INIT -#define CONFIG_SYS_PCI_MASTER_INIT -#define CONFIG_SYS_PCI_BOARD_FIXUP_IRQ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ -#define CONFIG_SYS_PCI_SUBSYS_ID 0xcafe /* Whatever */ - -/* - * External Bus Controller (EBC) Setup - */ - -/* - * On Sequoia CS0 and CS3 are switched when configuring for NAND booting - */ -#if !defined(CONFIG_SYS_RAMBOOT) -#define CONFIG_SYS_NAND_CS 3 /* NAND chip connected to CSx */ -/* Memory Bank 0 (NOR-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x03017200 -#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_FLASH_BASE | 0xda000) - -/* Memory Bank 3 (NAND-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB3AP 0x018003c0 -#define CONFIG_SYS_EBC_PB3CR (CONFIG_SYS_NAND_ADDR | 0x1c000) -#else -#define CONFIG_SYS_NAND_CS 0 /* NAND chip connected to CSx */ -/* Memory Bank 3 (NOR-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB3AP 0x03017200 -#define CONFIG_SYS_EBC_PB3CR (CONFIG_SYS_FLASH_BASE | 0xda000) - -/* Memory Bank 0 (NAND-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x018003c0 -#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_NAND_ADDR | 0x1c000) -#endif - -/* Memory Bank 2 (CPLD) initialization */ -#define CONFIG_SYS_EBC_PB2AP 0x24814580 -#define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_BCSR_BASE | 0x38000) - -#define CONFIG_SYS_BCSR5_PCI66EN 0x80 - -/* - * NAND FLASH - */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS) -#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ - -/* - * PPC440 GPIO Configuration - */ -/* test-only: take GPIO init from pcs440ep ???? in config file */ -#define CONFIG_SYS_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ -{ \ -/* GPIO Core 0 */ \ -{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \ -{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO6 EBC_CS_N(1) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 EBC_CS_N(2) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 EBC_CS_N(3) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 EBC_CS_N(4) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5) */ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR */ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO13 */ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO14 */ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO15 */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO16 GMCTxD(4) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO17 GMCTxD(5) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO18 GMCTxD(6) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO19 GMCTxD(7) */ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO20 RejectPkt0 */ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO21 RejectPkt1 */ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO22 */ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO23 SCPD0 */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO24 GMCTxD(2) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO25 GMCTxD(3) */ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26 */ \ -{GPIO0_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO28 USB2D_TXVALID */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \ -}, \ -{ \ -/* GPIO Core 1 */ \ -{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO32 USB2D_OPMODE0 EBC_DATA(2) */ \ -{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO33 USB2D_OPMODE1 EBC_DATA(3) */ \ -{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO34 UART0_8PIN_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ -{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ -{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO36 UART0_CTS_N EBC_DATA(0) UART3_SIN*/ \ -{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO37 UART0_RTS_N EBC_DATA(1) UART3_SOUT*/ \ -{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_8PIN_DTR_N UART1_SOUT */ \ -{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_8PIN_RI_N UART1_SIN */ \ -{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0) */ \ -{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1) */ \ -{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2) */ \ -{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3) */ \ -{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \ -{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \ -} \ -} - -#ifdef CONFIG_VIDEO -#define CONFIG_BIOSEMU /* x86 bios emulator for vga bios */ -#define CONFIG_ATI_RADEON_FB /* use radeon framebuffer driver */ -#define VIDEO_IO_OFFSET 0xe8000000 -#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET -#define CONFIG_VIDEO_SW_CURSOR -#define CONFIG_VIDEO_LOGO -#define CONFIG_CFB_CONSOLE -#define CONFIG_SPLASH_SCREEN -#define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_CMD_BMP -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/taihu.h b/include/configs/taihu.h deleted file mode 100644 index 5c0ce7a..0000000 --- a/include/configs/taihu.h +++ /dev/null @@ -1,307 +0,0 @@ -/* - * (C) Copyright 2000-2005 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * (C) Copyright 2005-2007 - * Beijing UD Technology Co., Ltd., taihusupport(a)amcc.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - - -#define CONFIG_405EP 1 /* this is a PPC405 CPU */ -#define CONFIG_TAIHU 1 /* on a taihu board */ - -#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 - -/* - * Include common defines/options for all AMCC eval boards - */ -#define CONFIG_HOSTNAME taihu -#include "amcc-common.h" - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f */ - -#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ - -#define CONFIG_NO_SERIAL_EEPROM - -/*----------------------------------------------------------------------------*/ -#ifdef CONFIG_NO_SERIAL_EEPROM - -/* -!------------------------------------------------------------------------------- -! PLL settings for 333MHz CPU, 111MHz PLB/SDRAM, 55MHz EBC, 33MHz PCI, -! assuming a 33MHz input clock to the 405EP from the C9531. -!------------------------------------------------------------------------------- -*/ -#define PLLMR0_333_111_55_37 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ - PLL_MALDIV_1 | PLL_PCIDIV_3) -#define PLLMR1_333_111_55_37 (PLL_FBKDIV_10 | \ - PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) -#define PLLMR0_333_111_55_111 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ - PLL_MALDIV_1 | PLL_PCIDIV_1) -#define PLLMR1_333_111_55_111 (PLL_FBKDIV_10 | \ - PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) - -#define PLLMR0_DEFAULT PLLMR0_333_111_55_37 -#define PLLMR1_DEFAULT PLLMR1_333_111_55_37 -#define PLLMR0_DEFAULT_PCI66 PLLMR0_333_111_55_111 -#define PLLMR1_DEFAULT_PCI66 PLLMR1_333_111_55_111 - -#endif -/*----------------------------------------------------------------------------*/ - -#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ - -/* - * Default environment variables - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_AMCC_DEF_ENV \ - CONFIG_AMCC_DEF_ENV_PPC \ - CONFIG_AMCC_DEF_ENV_NOR_UPD \ - "kernel_addr=FC000000\0" \ - "ramdisk_addr=FC180000\0" \ - "" - -#define CONFIG_PHY_ADDR 0x14 /* PHY address */ -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_PHY1_ADDR 0x10 /* EMAC1 PHY address */ -#define CONFIG_PHY_RESET 1 - -/* - * Commands additional to the ones defined in amcc-common.h - */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_PCI -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SPI - -#undef CONFIG_SPD_EEPROM /* use SPD EEPROM for setup */ -#define CONFIG_SYS_SDRAM_SIZE_PER_BANK 0x04000000 /* 64MB */ -#define CONFIG_SYS_SDRAM_BANKS 2 - -/* - * SDRAM configuration (please see cpu/ppc/sdram.[ch]) - */ -#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ -#define CONFIG_SDRAM_BANK1 1 /* init onboard SDRAM bank 1 */ - -/* SDRAM timings used in datasheet */ -#define CONFIG_SYS_SDRAM_CL 3 /* CAS latency */ -#define CONFIG_SYS_SDRAM_tRP 20 /* PRECHARGE command period */ -#define CONFIG_SYS_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */ -#define CONFIG_SYS_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */ -#define CONFIG_SYS_SDRAM_tRFC 66 /* Auto refresh period */ - -/* - * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1. - * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31. - * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value. - * The Linux BASE_BAUD define should match this configuration. - * baseBaud = cpuClock/(uartDivisor*16) - * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, - * set Linux BASE_BAUD to 403200. - */ -#define CONFIG_CONS_INDEX 2 /* Use UART1 */ -#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ -#undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ -#define CONFIG_SYS_BASE_BAUD 691200 - -/*----------------------------------------------------------------------- - * I2C stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 - -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } /* avoid i2c probe hangup (?) */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */ - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* I2C boot EEPROM (24C02W) */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ - -#define CONFIG_SOFT_SPI -#define SPI_SCL spi_scl -#define SPI_SDA spi_sda -#define SPI_READ spi_read() -#define SPI_DELAY udelay(2) -#ifndef __ASSEMBLY__ -void spi_scl(int); -void spi_sda(int); -unsigned char spi_read(void); -#endif - -/* standard dtt sensor configuration */ -#define CONFIG_DTT_DS1775 1 -#define CONFIG_DTT_SENSORS { 0 } -#define CONFIG_SYS_I2C_DTT_ADDR 0x49 - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ - -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - /* resource configuration */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ -#define CONFIG_SYS_PCI_CLASSCODE 0x0600 /* PCI Class Code: bridge/host */ -#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CONFIG_SYS_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */ -#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ -#define CONFIG_SYS_PCI_PTM2LA 0x00000000 /* disabled */ -#define CONFIG_SYS_PCI_PTM2MS 0x00000000 /* disabled */ -#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ -#define CONFIG_EEPRO100 1 - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - */ -#define CONFIG_SYS_FLASH_BASE 0xFFE00000 - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_ADDR0 0x555 -#define CONFIG_SYS_FLASH_ADDR1 0x2aa -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#endif /* CONFIG_ENV_IS_IN_FLASH */ - -/*----------------------------------------------------------------------- - * NVRAM organization - */ -#define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */ -#define CONFIG_SYS_NVRAM_SIZE 0x1ff8 /* NVRAM size */ - -#ifdef CONFIG_ENV_IS_IN_NVRAM -#define CONFIG_ENV_SIZE 0x0ff8 /* Size of Environment vars */ -#define CONFIG_ENV_ADDR \ - (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) /* Env*/ -#endif - -/*----------------------------------------------------------------------- - * PPC405 GPIO Configuration - */ -#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO Alternate1 */ \ -{ \ -/* GPIO Core 0 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast SPI CS */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO5 TS3 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO7 TS5 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 SPI SCLK */ \ -{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 SPI DI */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 SPI DO */ \ -{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 PCI INTA */ \ -{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 PCI INTB */ \ -{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 PCI INTC */ \ -{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 PCI INTD */ \ -{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 USB */ \ -{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 EBC */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 unused */ \ -{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD UART1 */ \ -{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \ -{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \ -{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx UART0 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 User LED1 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 User LED2 */ \ -} \ -} - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0xFC000000 /* FLASH bank #1 */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in data cache) - */ -/* use on chip memory (OCM) for temperary stack until sdram is tested */ -#define CONFIG_SYS_TEMP_STACK_OCM 1 - -/* On Chip Memory location */ -#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 -#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * External Bus Controller (EBC) Setup - */ - -/* Memory Bank 0 (Flash/SRAM) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x03815600 -#define CONFIG_SYS_EBC_PB0CR 0xFFE3A000 /* BAS=0xFFE,BS=2MB,BU=R/W,BW=16bit */ - -/* Memory Bank 1 (NVRAM/RTC) initialization */ -#define CONFIG_SYS_EBC_PB1AP 0x05815600 -#define CONFIG_SYS_EBC_PB1CR 0xFC0BA000 /* BAS=0xFc0,BS=32MB,BU=R/W,BW=16bit */ - -/* Memory Bank 2 (USB device) initialization */ -#define CONFIG_SYS_EBC_PB2AP 0x03016600 -#define CONFIG_SYS_EBC_PB2CR 0x50018000 /* BAS=0x500,BS=1MB,BU=R/W,BW=8bit */ - -/* Memory Bank 3 (LCM and D-flip-flop) initialization */ -#define CONFIG_SYS_EBC_PB3AP 0x158FF600 -#define CONFIG_SYS_EBC_PB3CR 0x50118000 /* BAS=0x501,BS=1MB,BU=R/W,BW=8bit */ - -/* Memory Bank 4 (not install) initialization */ -#define CONFIG_SYS_EBC_PB4AP 0x158FF600 -#define CONFIG_SYS_EBC_PB4CR 0x5021A000 - -#define CPLD_REG0_ADDR 0x50100000 -#define CPLD_REG1_ADDR 0x50100001 - -#endif /* __CONFIG_H */ diff --git a/include/configs/taishan.h b/include/configs/taishan.h deleted file mode 100644 index 3d5c351..0000000 --- a/include/configs/taishan.h +++ /dev/null @@ -1,193 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************ - * TAISHAN.h - configuration for AMCC 440GX Ref - ***********************************************************************/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_TAISHAN 1 /* Board is taishan */ -#define CONFIG_440GX 1 /* Specifc GX support */ -#define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ - -#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 - -/* - * Include common defines/options for all AMCC eval boards - */ -#define CONFIG_HOSTNAME taishan -#define CONFIG_USE_TTY ttyS1 -#include "amcc-common.h" - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_BASE 0xfc000000 /* start of FLASH */ -#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ -#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ - -#define CONFIG_SYS_EBC0_FLASH_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_EBC1_FPGA_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x01000000) -#define CONFIG_SYS_EBC2_LCM_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x02000000) -#define CONFIG_SYS_EBC3_CONN_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000) - -#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700) - -/*----------------------------------------------------------------------- - * Initial RAM & stack pointer (placed in internal SRAM) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_TEMP_STACK_OCM 1 -#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM*/ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#define CONFIG_CONS_INDEX 2 /* Use UART1 */ -#define CONFIG_SYS_EXT_SERIAL_CLOCK (1843200 * 6) /* Ext clk @ 11.059 MHz */ - -/*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ - -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/*----------------------------------------------------------------------- - * E2PROM bootstrap configure value - *----------------------------------------------------------------------*/ - -/* - * 800/133/66 - * IIC 0~15: 86 78 11 6a 61 A7 04 62 00 00 00 00 00 00 00 00 - */ - -/* - * 800/160/80 - * IIC 0~15: 86 78 c1 a6 09 67 04 63 00 00 00 00 00 00 00 00 - */ - -/*----------------------------------------------------------------------- - * DDR SDRAM - *----------------------------------------------------------------------*/ -#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */ -#define CONFIG_SDRAM_BANK0 1 /* init onboard DDR SDRAM bank 0 */ -#define CONFIG_SYS_SDRAM0_TR0 0xC10A401A -#undef CONFIG_SDRAM_ECC /* enable ECC support */ - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 - -#undef CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -#define CONFIG_SYS_BOOTSTRAP_IIC_ADDR 0x50 - -/* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 70 -#define CONFIG_SYS_DTT_LOW_TEMP -30 -#define CONFIG_SYS_DTT_HYSTERESIS 3 - -/* - * Default environment variables - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_AMCC_DEF_ENV \ - CONFIG_AMCC_DEF_ENV_POWERPC \ - CONFIG_AMCC_DEF_ENV_PPC_OLD \ - CONFIG_AMCC_DEF_ENV_NOR_UPD \ - "kernel_addr=fc000000\0" \ - "ramdisk_addr=fc180000\0" \ - "kozio=bootm 0xffe00000\0" \ - "" - -/*----------------------------------------------------------------------- - * Networking - *----------------------------------------------------------------------*/ -#define CONFIG_EMAC_NR_START 2 /* start with EMAC 2 (skip 0&1) */ -#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */ -#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */ -#define CONFIG_PHY2_ADDR 0x1 -#define CONFIG_PHY3_ADDR 0x3 -#define CONFIG_ET1011C_PHY 1 -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 -#define CONFIG_HAS_ETH3 -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_PHY_RESET_DELAY 1000 - -/* - * Commands additional to the ones defined in amcc-common.h - */ -#define CONFIG_CMD_DTT -#define CONFIG_CMD_PCI - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -/* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_EEPRO100 1 /* include PCI EEPRO100 */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */ - -/* Board-specific PCI */ -#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/walnut.h b/include/configs/walnut.h deleted file mode 100644 index 8b803a2..0000000 --- a/include/configs/walnut.h +++ /dev/null @@ -1,214 +0,0 @@ -/* - * (C) Copyright 2000-2005 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_WALNUT 1 /* ...on a WALNUT board */ - /* ...or on a SYCAMORE board */ - -#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 - -/* - * Include common defines/options for all AMCC eval boards - */ -#define CONFIG_HOSTNAME walnut -#include "amcc-common.h" - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ - -#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ - -/* - * Default environment variables - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_AMCC_DEF_ENV \ - CONFIG_AMCC_DEF_ENV_POWERPC \ - CONFIG_AMCC_DEF_ENV_PPC_OLD \ - CONFIG_AMCC_DEF_ENV_NOR_UPD \ - "kernel_addr=fff80000\0" \ - "ramdisk_addr=fff80000\0" \ - "" - -#define CONFIG_PHY_ADDR 1 /* PHY address */ -#define CONFIG_HAS_ETH0 1 - -#define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Walnut */ - -/* - * Commands additional to the ones defined in amcc-common.h - */ -#define CONFIG_CMD_DATE -#define CONFIG_CMD_PCI -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - -#define CONFIG_SPD_EEPROM 1 /* use SPD EEPROM for setup */ - -/* - * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1. - * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31. - * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value. - * The Linux BASE_BAUD define should match this configuration. - * baseBaud = cpuClock/(uartDivisor*16) - * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, - * set Linux BASE_BAUD to 403200. - */ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ -#undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ -#define CONFIG_SYS_BASE_BAUD 691200 - -/*----------------------------------------------------------------------- - * I2C stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 - -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ - -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - /* resource configuration */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ -#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CONFIG_SYS_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */ -#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ -#define CONFIG_SYS_PCI_PTM2LA 0x00000000 /* disabled */ -#define CONFIG_SYS_PCI_PTM2MS 0x00000000 /* disabled */ -#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - */ -#define CONFIG_SYS_FLASH_BASE 0xFFF80000 - -/* - * Define here the location of the environment variables (FLASH or NVRAM). - * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only - * supported for backward compatibility. - */ -#if 1 -#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#else -#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */ -#endif - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#define CONFIG_SYS_FLASH_ADDR0 0x5555 -#define CONFIG_SYS_FLASH_ADDR1 0x2aaa -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#endif /* CONFIG_ENV_IS_IN_FLASH */ - -/*----------------------------------------------------------------------- - * NVRAM organization - */ -#define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */ -#define CONFIG_SYS_NVRAM_SIZE 0x1ff8 /* NVRAM size */ - -#ifdef CONFIG_ENV_IS_IN_NVRAM -#define CONFIG_ENV_SIZE 0x1000 /* Size of Environment vars */ -#define CONFIG_ENV_ADDR \ - (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) /* Env */ -#endif - -/*----------------------------------------------------------------------- - * External Bus Controller (EBC) Setup - */ - -/* Memory Bank 0 (Flash Bank 0) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x9B015480 -#define CONFIG_SYS_EBC_PB0CR 0xFFF18000 /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit */ - -#define CONFIG_SYS_EBC_PB1AP 0x02815480 -#define CONFIG_SYS_EBC_PB1CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ - -#define CONFIG_SYS_EBC_PB2AP 0x04815A80 -#define CONFIG_SYS_EBC_PB2CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */ - -#define CONFIG_SYS_EBC_PB3AP 0x01815280 -#define CONFIG_SYS_EBC_PB3CR 0xF0218000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit */ - -#define CONFIG_SYS_EBC_PB7AP 0x01815280 -#define CONFIG_SYS_EBC_PB7CR 0xF0318000 /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit */ - -/*----------------------------------------------------------------------- - * External peripheral base address - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_KEY_REG_BASE_ADDR 0xF0100000 -#define CONFIG_SYS_IR_REG_BASE_ADDR 0xF0200000 -#define CONFIG_SYS_FPGA_REG_BASE_ADDR 0xF0300000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ -#define CONFIG_SYS_INIT_DCACHE_CS 4 /* use cs # 4 for data cache memory */ - -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Definitions for Serial Presence Detect EEPROM address - * (to get SDRAM settings) - */ -#define SPD_EEPROM_ADDRESS 0x50 - -#endif /* __CONFIG_H */ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h deleted file mode 100644 index 8508a80..0000000 --- a/include/configs/yosemite.h +++ /dev/null @@ -1,236 +0,0 @@ -/* - * (C) Copyright 2005-2007 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************ - * yosemite.h - configuration for Yosemite & Yellowstone boards - ***********************************************************************/ -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -/* This config file is used for Yosemite (440EP) and Yellowstone (440GR)*/ -#ifndef CONFIG_YELLOWSTONE -#define CONFIG_440EP 1 /* Specific PPC440EP support */ -#define CONFIG_HOSTNAME yosemite -#else -#define CONFIG_440GR 1 /* Specific PPC440GR support */ -#define CONFIG_HOSTNAME yellowstone -#endif -#define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF80000 - -/* - * Include common defines/options for all AMCC eval boards - */ -#include "amcc-common.h" - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ -#define CONFIG_BOARD_RESET 1 /* call board_reset() */ - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_BASE 0xfc000000 /* start of FLASH */ -#define CONFIG_SYS_PCI_MEMBASE 0xa0000000 /* mapped pci memory*/ -#define CONFIG_SYS_PCI_MEMBASE1 CONFIG_SYS_PCI_MEMBASE + 0x10000000 -#define CONFIG_SYS_PCI_MEMBASE2 CONFIG_SYS_PCI_MEMBASE1 + 0x10000000 -#define CONFIG_SYS_PCI_MEMBASE3 CONFIG_SYS_PCI_MEMBASE2 + 0x10000000 - -/*Don't change either of these*/ -#define CONFIG_SYS_PCI_BASE 0xe0000000 /* internal PCI regs*/ -/*Don't change either of these*/ - -#define CONFIG_SYS_USB_DEVICE 0x50000000 -#define CONFIG_SYS_NVRAM_BASE_ADDR 0x80000000 -#define CONFIG_SYS_BCSR_BASE (CONFIG_SYS_NVRAM_BASE_ADDR | 0x2000) -#define CONFIG_SYS_BOOT_BASE_ADDR 0xf0000000 - -/*----------------------------------------------------------------------- - * Initial RAM & stack pointer (placed in SDRAM) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_INIT_RAM_DCACHE 1 /* d-cache as init ram */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* DCache */ -#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* use external 11.059MHz clk */ - -/*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -/* - * Define here the location of the environment variables (FLASH or EEPROM). - * Note: DENX encourages to use redundant environment in FLASH. - */ -#if 1 -#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#else -#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ -#endif - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* AMD RESET for STM 29W320DB! */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#endif /* CONFIG_ENV_IS_IN_FLASH */ - -/*----------------------------------------------------------------------- - * DDR SDRAM - *----------------------------------------------------------------------*/ -#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */ -#define CONFIG_SYS_KBYTES_SDRAM (128 * 1024) /* 128MB */ -#define CONFIG_SYS_SDRAM_BANKS (2) - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 - -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -#ifdef CONFIG_ENV_IS_IN_EEPROM -#define CONFIG_ENV_SIZE 0x200 /* Size of Environment vars */ -#define CONFIG_ENV_OFFSET 0x0 -#endif /* CONFIG_ENV_IS_IN_EEPROM */ - -/* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_AD7414 1 /* use AD7414 */ -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 70 -#define CONFIG_SYS_DTT_LOW_TEMP -30 -#define CONFIG_SYS_DTT_HYSTERESIS 3 - -/* - * Default environment variables - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_AMCC_DEF_ENV \ - CONFIG_AMCC_DEF_ENV_POWERPC \ - CONFIG_AMCC_DEF_ENV_PPC_OLD \ - CONFIG_AMCC_DEF_ENV_NOR_UPD \ - "kernel_addr=fc000000\0" \ - "ramdisk_addr=fc180000\0" \ - "" - -#define CONFIG_HAS_ETH0 1 /* add support for "ethaddr" */ -#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ -#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ -#define CONFIG_PHY1_ADDR 3 - -/* Partitions */ -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION -#define CONFIG_ISO_PARTITION - -#ifdef CONFIG_440EP -/* USB */ -#define CONFIG_USB_OHCI_NEW -#define CONFIG_USB_STORAGE -#define CONFIG_SYS_OHCI_BE_CONTROLLER - -#undef CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE (CONFIG_SYS_PERIPHERAL_BASE | 0x1000) -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "ppc440" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 - -/* Comment this out to enable USB 1.1 device */ -#define USB_2_0_DEVICE - -#define CONFIG_SUPPORT_VFAT -#endif /* CONFIG_440EP */ - -#ifdef DEBUG -#define CONFIG_PANIC_HANG -#else -#define CONFIG_HW_WATCHDOG /* watchdog */ -#endif - -/* - * Commands additional to the ones defined in amcc-common.h - */ -#define CONFIG_CMD_DTT -#define CONFIG_CMD_PCI - -#ifdef CONFIG_440EP - #define CONFIG_CMD_USB - #define CONFIG_CMD_FAT - #define CONFIG_CMD_EXT2 -#endif - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -/* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/ - -/* Board-specific PCI */ -#define CONFIG_SYS_PCI_TARGET_INIT -#define CONFIG_SYS_PCI_MASTER_INIT - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ -#define CONFIG_SYS_PCI_SUBSYS_ID 0xcafe /* Whatever */ - -/*----------------------------------------------------------------------- - * External Bus Controller (EBC) Setup - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CPLD 0x80000000 - -/* Memory Bank 0 (NOR-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x03017300 -#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_FLASH | 0xda000) - -/* Memory Bank 2 (CPLD) initialization */ -#define CONFIG_SYS_EBC_PB2AP 0x04814500 -#define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_CPLD | 0x18000) - -#define CONFIG_SYS_BCSR5_PCI66EN 0x80 - -#endif /* __CONFIG_H */ diff --git a/include/configs/yucca.h b/include/configs/yucca.h deleted file mode 100644 index 76717e4..0000000 --- a/include/configs/yucca.h +++ /dev/null @@ -1,413 +0,0 @@ -/* - * (C) Copyright 2004 Paul Reynolds <PaulReynolds(a)lhsolutions.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************ - * 1 january 2005 Alain Saurel <asaurel(a)amcc.com> - * Adapted to current Das U-Boot source - ***********************************************************************/ -/************************************************************************ - * yucca.h - configuration for AMCC 440SPe Ref (yucca) - ***********************************************************************/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_440SPE 1 /* Specifc SPe support */ -#define CONFIG_440SPE_REVA 1 /* Support old Rev A. */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ -#define EXTCLK_33_33 33333333 -#define EXTCLK_66_66 66666666 -#define EXTCLK_50 50000000 -#define EXTCLK_83 83333333 - -#define CONFIG_SYS_TEXT_BASE 0xfffb0000 - -/* - * Include common defines/options for all AMCC eval boards - */ -#define CONFIG_HOSTNAME yucca -#include "amcc-common.h" - -#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ -#undef CONFIG_SHOW_BOOT_PROGRESS -#undef CONFIG_STRESS - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_BASE 0xfff00000 /* start of FLASH */ -#define CONFIG_SYS_ISRAM_BASE 0x90000000 /* internal SRAM */ - -#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped PCI memory */ -#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ -#define CONFIG_SYS_PCI_TARGBASE CONFIG_SYS_PCI_MEMBASE - -#define CONFIG_SYS_PCIE_MEMBASE 0xb0000000 /* mapped PCIe memory */ -#define CONFIG_SYS_PCIE_MEMSIZE 0x08000000 /* smallest incr for PCIe port */ -#define CONFIG_SYS_PCIE_BASE 0xe0000000 /* PCIe UTL regs */ - -#define CONFIG_SYS_PCIE0_CFGBASE 0xc0000000 -#define CONFIG_SYS_PCIE1_CFGBASE 0xc1000000 -#define CONFIG_SYS_PCIE2_CFGBASE 0xc2000000 -#define CONFIG_SYS_PCIE0_XCFGBASE 0xc3000000 -#define CONFIG_SYS_PCIE1_XCFGBASE 0xc3001000 -#define CONFIG_SYS_PCIE2_XCFGBASE 0xc3002000 - -/* base address of inbound PCIe window */ -#define CONFIG_SYS_PCIE_INBOUND_BASE 0x0000000400000000ULL - -/* System RAM mapped to PCI space */ -#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE -#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE -#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) - -#define CONFIG_SYS_FPGA_BASE 0xe2000000 /* epld */ -#define CONFIG_SYS_OPER_FLASH 0xe7000000 /* SRAM - OPER Flash */ - -/* #define CONFIG_SYS_NVRAM_BASE_ADDR 0x08000000 */ -/*----------------------------------------------------------------------- - * Initial RAM & stack pointer (placed in internal SRAM) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_TEMP_STACK_OCM 1 -#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ - -#undef CONFIG_SYS_EXT_SERIAL_CLOCK -/* #define CONFIG_SYS_EXT_SERIAL_CLOCK (1843200 * 6) */ /* Ext clk @ 11.059 MHz */ - -/*----------------------------------------------------------------------- - * DDR SDRAM - *----------------------------------------------------------------------*/ -#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ -#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/ -#define CONFIG_DDR_ECC 1 /* with ECC support */ - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 - -#define IIC0_BOOTPROM_ADDR 0x50 -#define IIC0_ALT_BOOTPROM_ADDR 0x54 - -/* Don't probe these addrs */ -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x50}, {0, 0x52}, {0, 0x53}, {0, 0x54} } - -/* #if defined(CONFIG_CMD_EEPROM) */ -/* #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 */ /* I2C boot EEPROM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ -/* #endif */ - -/*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -/* #define CONFIG_SYS_NVRAM_SIZE (0x2000 - 8) */ /* NVRAM size(8k)- RTC regs */ - -#undef CONFIG_ENV_IS_IN_NVRAM /* ... not in NVRAM */ -#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment uses flash */ -#undef CONFIG_ENV_IS_IN_EEPROM /* ... not in EEPROM */ -#define CONFIG_ENV_OVERWRITE 1 - -/* - * Default environment variables - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_AMCC_DEF_ENV \ - CONFIG_AMCC_DEF_ENV_PPC \ - CONFIG_AMCC_DEF_ENV_NOR_UPD \ - "kernel_addr=E7F10000\0" \ - "ramdisk_addr=E7F20000\0" \ - "pciconfighost=1\0" \ - "pcie_mode=RP:EP:EP\0" \ - "" - -/* - * Commands additional to the ones defined in amcc-common.h - */ -#define CONFIG_CMD_PCI -#define CONFIG_CMD_SDRAM - -#define CONFIG_IBM_EMAC4_V4 1 -#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ -#define CONFIG_HAS_ETH0 -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_PHY_RESET_DELAY 1000 -#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */ -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_ADDR0 0x5555 -#define CONFIG_SYS_FLASH_ADDR1 0x2aaa -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char - -#define CONFIG_SYS_FLASH_2ND_16BIT_DEV 1 /* evb440SPe has 8 and 16bit device */ -#define CONFIG_SYS_FLASH_2ND_ADDR 0xe7c00000 /* evb440SPe has 8 and 16bit device*/ - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR 0xfffa0000 -/* #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) */ -#define CONFIG_ENV_SIZE 0x10000 /* Size of Environment vars */ -#endif /* CONFIG_ENV_IS_IN_FLASH */ -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -/* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ -#define CONFIG_PCI_CONFIG_HOST_BRIDGE - -/* Board-specific PCI */ -#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */ -#undef CONFIG_SYS_PCI_MASTER_INIT - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ -/* #define CONFIG_SYS_PCI_SUBSYS_ID CONFIG_SYS_PCI_SUBSYS_DEVICEID */ - -/* - * NETWORK Support (PCI): - */ -/* Support for Intel 82557/82559/82559ER chips. */ -#define CONFIG_EEPRO100 - -/* FB Divisor selection */ -#define FPGA_FB_DIV_6 6 -#define FPGA_FB_DIV_10 10 -#define FPGA_FB_DIV_12 12 -#define FPGA_FB_DIV_20 20 - -/* VCO Divisor selection */ -#define FPGA_VCO_DIV_4 4 -#define FPGA_VCO_DIV_6 6 -#define FPGA_VCO_DIV_8 8 -#define FPGA_VCO_DIV_10 10 - -/*----------------------------------------------------------------------------+ -| FPGA registers and bit definitions -+----------------------------------------------------------------------------*/ -/* PowerPC 440SPe Board FPGA is reached with physical address 0x1 E2000000. */ -/* TLB initialization makes it correspond to logical address 0xE2000000. */ -/* => Done init_chip.s in bootlib */ -#define FPGA_REG_BASE_ADDR 0xE2000000 -#define FPGA_GPIO_BASE_ADDR 0xE2010000 -#define FPGA_INT_BASE_ADDR 0xE2020000 - -/*----------------------------------------------------------------------------+ -| Display -+----------------------------------------------------------------------------*/ -#define PPC440SPE_DISPLAY FPGA_REG_BASE_ADDR - -#define PPC440SPE_DISPLAY_D8 (FPGA_REG_BASE_ADDR+0x06) -#define PPC440SPE_DISPLAY_D4 (FPGA_REG_BASE_ADDR+0x04) -#define PPC440SPE_DISPLAY_D2 (FPGA_REG_BASE_ADDR+0x02) -#define PPC440SPE_DISPLAY_D1 (FPGA_REG_BASE_ADDR+0x00) -/*define WRITE_DISPLAY_DIGIT(n) IOREG8(FPGA_REG_BASE_ADDR + (2*n))*/ -/*#define IOREG8(addr) *((volatile unsigned char *)(addr))*/ - -/*----------------------------------------------------------------------------+ -| ethernet/reset/boot Register 1 -+----------------------------------------------------------------------------*/ -#define FPGA_REG10 (FPGA_REG_BASE_ADDR+0x10) - -#define FPGA_REG10_10MHZ_ENABLE 0x8000 -#define FPGA_REG10_100MHZ_ENABLE 0x4000 -#define FPGA_REG10_GIGABIT_ENABLE 0x2000 -#define FPGA_REG10_FULL_DUPLEX 0x1000 /* force Full Duplex*/ -#define FPGA_REG10_RESET_ETH 0x0800 -#define FPGA_REG10_AUTO_NEG_DIS 0x0400 -#define FPGA_REG10_INTP_ETH 0x0200 - -#define FPGA_REG10_RESET_HISR 0x0080 -#define FPGA_REG10_ENABLE_DISPLAY 0x0040 -#define FPGA_REG10_RESET_SDRAM 0x0020 -#define FPGA_REG10_OPER_BOOT 0x0010 -#define FPGA_REG10_SRAM_BOOT 0x0008 -#define FPGA_REG10_SMALL_BOOT 0x0004 -#define FPGA_REG10_FORCE_COLA 0x0002 -#define FPGA_REG10_COLA_MANUAL 0x0001 - -#define FPGA_REG10_SDRAM_ENABLE 0x0020 - -#define FPGA_REG10_ENET_ENCODE2(n) ((((unsigned long)(n))&0x0F)<<4) /*from ocotea ?*/ -#define FPGA_REG10_ENET_DECODE2(n) ((((unsigned long)(n))>>4)&0x0F) /*from ocotea ?*/ - -/*----------------------------------------------------------------------------+ -| MUX control -+----------------------------------------------------------------------------*/ -#define FPGA_REG12 (FPGA_REG_BASE_ADDR+0x12) - -#define FPGA_REG12_EBC_CTL 0x8000 -#define FPGA_REG12_UART1_CTS_RTS 0x4000 -#define FPGA_REG12_UART0_RX_ENABLE 0x2000 -#define FPGA_REG12_UART1_RX_ENABLE 0x1000 -#define FPGA_REG12_UART2_RX_ENABLE 0x0800 -#define FPGA_REG12_EBC_OUT_ENABLE 0x0400 -#define FPGA_REG12_GPIO0_OUT_ENABLE 0x0200 -#define FPGA_REG12_GPIO1_OUT_ENABLE 0x0100 -#define FPGA_REG12_GPIO_SELECT 0x0010 -#define FPGA_REG12_GPIO_CHREG 0x0008 -#define FPGA_REG12_GPIO_CLK_CHREG 0x0004 -#define FPGA_REG12_GPIO_OETRI 0x0002 -#define FPGA_REG12_EBC_ERROR 0x0001 - -/*----------------------------------------------------------------------------+ -| PCI Clock control -+----------------------------------------------------------------------------*/ -#define FPGA_REG16 (FPGA_REG_BASE_ADDR+0x16) - -#define FPGA_REG16_PCI_CLK_CTL0 0x8000 -#define FPGA_REG16_PCI_CLK_CTL1 0x4000 -#define FPGA_REG16_PCI_CLK_CTL2 0x2000 -#define FPGA_REG16_PCI_CLK_CTL3 0x1000 -#define FPGA_REG16_PCI_CLK_CTL4 0x0800 -#define FPGA_REG16_PCI_CLK_CTL5 0x0400 -#define FPGA_REG16_PCI_CLK_CTL6 0x0200 -#define FPGA_REG16_PCI_CLK_CTL7 0x0100 -#define FPGA_REG16_PCI_CLK_CTL8 0x0080 -#define FPGA_REG16_PCI_CLK_CTL9 0x0040 -#define FPGA_REG16_PCI_EXT_ARB0 0x0020 -#define FPGA_REG16_PCI_MODE_1 0x0010 -#define FPGA_REG16_PCI_TARGET_MODE 0x0008 -#define FPGA_REG16_PCI_INTP_MODE 0x0004 - -/* FB1 Divisor selection */ -#define FPGA_REG16_FB2_DIV_MASK 0x1000 -#define FPGA_REG16_FB2_DIV_LOW 0x0000 -#define FPGA_REG16_FB2_DIV_HIGH 0x1000 -/* FB2 Divisor selection */ -/* S3 switch on Board */ -#define FPGA_REG16_FB1_DIV_MASK 0x2000 -#define FPGA_REG16_FB1_DIV_LOW 0x0000 -#define FPGA_REG16_FB1_DIV_HIGH 0x2000 -/* PCI0 Clock Selection */ -/* S3 switch on Board */ -#define FPGA_REG16_PCI0_CLK_MASK 0x0c00 -#define FPGA_REG16_PCI0_CLK_33_33 0x0000 -#define FPGA_REG16_PCI0_CLK_66_66 0x0800 -#define FPGA_REG16_PCI0_CLK_100 0x0400 -#define FPGA_REG16_PCI0_CLK_133_33 0x0c00 -/* VCO Divisor selection */ -/* S3 switch on Board */ -#define FPGA_REG16_VCO_DIV_MASK 0xc000 -#define FPGA_REG16_VCO_DIV_4 0x0000 -#define FPGA_REG16_VCO_DIV_8 0x4000 -#define FPGA_REG16_VCO_DIV_6 0x8000 -#define FPGA_REG16_VCO_DIV_10 0xc000 -/* Master Clock Selection */ -/* S3, S4 switches on Board */ -#define FPGA_REG16_MASTER_CLK_MASK 0x01c0 -#define FPGA_REG16_MASTER_CLK_EXT 0x0000 -#define FPGA_REG16_MASTER_CLK_66_66 0x0040 -#define FPGA_REG16_MASTER_CLK_50 0x0080 -#define FPGA_REG16_MASTER_CLK_33_33 0x00c0 -#define FPGA_REG16_MASTER_CLK_25 0x0100 - -/*----------------------------------------------------------------------------+ -| PCI Miscellaneous -+----------------------------------------------------------------------------*/ -#define FPGA_REG18 (FPGA_REG_BASE_ADDR+0x18) - -#define FPGA_REG18_PCI_PRSNT1 0x8000 -#define FPGA_REG18_PCI_PRSNT2 0x4000 -#define FPGA_REG18_PCI_INTA 0x2000 -#define FPGA_REG18_PCI_SLOT0_INTP 0x1000 -#define FPGA_REG18_PCI_SLOT1_INTP 0x0800 -#define FPGA_REG18_PCI_SLOT2_INTP 0x0400 -#define FPGA_REG18_PCI_SLOT3_INTP 0x0200 -#define FPGA_REG18_PCI_PCI0_VC 0x0100 -#define FPGA_REG18_PCI_PCI0_VTH1 0x0080 -#define FPGA_REG18_PCI_PCI0_VTH2 0x0040 -#define FPGA_REG18_PCI_PCI0_VTH3 0x0020 - -/*----------------------------------------------------------------------------+ -| PCIe Miscellaneous -+----------------------------------------------------------------------------*/ -#define FPGA_REG1A (FPGA_REG_BASE_ADDR+0x1A) - -#define FPGA_REG1A_PE0_GLED 0x8000 -#define FPGA_REG1A_PE1_GLED 0x4000 -#define FPGA_REG1A_PE2_GLED 0x2000 -#define FPGA_REG1A_PE0_YLED 0x1000 -#define FPGA_REG1A_PE1_YLED 0x0800 -#define FPGA_REG1A_PE2_YLED 0x0400 -#define FPGA_REG1A_PE0_PWRON 0x0200 -#define FPGA_REG1A_PE1_PWRON 0x0100 -#define FPGA_REG1A_PE2_PWRON 0x0080 -#define FPGA_REG1A_PE0_REFCLK_ENABLE 0x0040 -#define FPGA_REG1A_PE1_REFCLK_ENABLE 0x0020 -#define FPGA_REG1A_PE2_REFCLK_ENABLE 0x0010 -#define FPGA_REG1A_PE_SPREAD0 0x0008 -#define FPGA_REG1A_PE_SPREAD1 0x0004 -#define FPGA_REG1A_PE_SELSOURCE_0 0x0002 -#define FPGA_REG1A_PE_SELSOURCE_1 0x0001 - -#define FPGA_REG1A_GLED_ENCODE(n) (FPGA_REG1A_PE0_GLED >> (n)) -#define FPGA_REG1A_YLED_ENCODE(n) (FPGA_REG1A_PE0_YLED >> (n)) -#define FPGA_REG1A_PWRON_ENCODE(n) (FPGA_REG1A_PE0_PWRON >> (n)) -#define FPGA_REG1A_REFCLK_ENCODE(n) (FPGA_REG1A_PE0_REFCLK_ENABLE >> (n)) - -/*----------------------------------------------------------------------------+ -| PCIe Miscellaneous -+----------------------------------------------------------------------------*/ -#define FPGA_REG1C (FPGA_REG_BASE_ADDR+0x1C) - -#define FPGA_REG1C_PE0_ROOTPOINT 0x8000 -#define FPGA_REG1C_PE1_ENDPOINT 0x4000 -#define FPGA_REG1C_PE2_ENDPOINT 0x2000 -#define FPGA_REG1C_PE0_PRSNT 0x1000 -#define FPGA_REG1C_PE1_PRSNT 0x0800 -#define FPGA_REG1C_PE2_PRSNT 0x0400 -#define FPGA_REG1C_PE0_WAKE 0x0080 -#define FPGA_REG1C_PE1_WAKE 0x0040 -#define FPGA_REG1C_PE2_WAKE 0x0020 -#define FPGA_REG1C_PE0_PERST 0x0010 -#define FPGA_REG1C_PE1_PERST 0x0008 -#define FPGA_REG1C_PE2_PERST 0x0004 - -#define FPGA_REG1C_ROOTPOINT_ENCODE(n) (FPGA_REG1C_PE0_ROOTPOINT >> (n)) -#define FPGA_REG1C_PERST_ENCODE(n) (FPGA_REG1C_PE0_PERST >> (n)) - -/*----------------------------------------------------------------------------+ -| Defines -+----------------------------------------------------------------------------*/ -#define PERIOD_133_33MHZ 7500 /* 7,5ns */ -#define PERIOD_100_00MHZ 10000 /* 10ns */ -#define PERIOD_83_33MHZ 12000 /* 12ns */ -#define PERIOD_75_00MHZ 13333 /* 13,333ns */ -#define PERIOD_66_66MHZ 15000 /* 15ns */ -#define PERIOD_50_00MHZ 20000 /* 20ns */ -#define PERIOD_33_33MHZ 30000 /* 30ns */ -#define PERIOD_25_00MHZ 40000 /* 40ns */ - -#endif /* __CONFIG_H */ -- 1.9.1

3 2

[U-Boot] Patch to mkenvimage to handle text files with length that exceed env size
by Brian McFarland 28 Mar '15

28 Mar '15

The current head revision of mkenvimage (e72be8947e129f5ab274c0a9f235d2cc0014b2ea) will prevent you from creating an env image from a text file that is larger than the env length specified by the '-s' option. That doesn't make sense given that the tool now allows comments and blank lines. This patch removes that limitation and allows longer text files to be used. I don't have time / desire at the moment to figure out "patman" and could really care less if this is adopted up stream. Just figured I would share in case anybody else finds it useful enough to take time to do a proper patch.

3 2

[U-Boot] [PATCH] m68k: fix 3 broken boards
by Angelo Dureghello 28 Mar '15

28 Mar '15

Fix eb_cpu5282 and eb_cpu5282_internal unresolved external error. These boards have video but don't need any ppc related video_setmem(). Fix M53017EVB moving away embedded env to a different offset, as in M52277EVB. Signed-off-by: Angelo Dureghello <angelo(a)sysam.it> --- board/freescale/m53017evb/u-boot.lds | 2 -- common/board_f.c | 4 ++-- include/configs/M53017EVB.h | 2 +- 3 files changed, 3 insertions(+), 5 deletions(-) diff --git a/board/freescale/m53017evb/u-boot.lds b/board/freescale/m53017evb/u-boot.lds index de8d09b..b1cae59 100644 --- a/board/freescale/m53017evb/u-boot.lds +++ b/board/freescale/m53017evb/u-boot.lds @@ -13,8 +13,6 @@ SECTIONS .text : { arch/m68k/cpu/mcf532x/start.o (.text*) - arch/m68k/cpu/mcf532x/built-in.o (.text*) - arch/m68k/lib/built-in.o (.text*) . = DEFINED(env_offset) ? env_offset : .; common/env_embedded.o (.text*) diff --git a/common/board_f.c b/common/board_f.c index 55ede07..8ea3a33 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -494,7 +494,7 @@ static int reserve_trace(void) #if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) || defined(CONFIG_8xx)) && \ !defined(CONFIG_ARM) && !defined(CONFIG_X86) && \ - !defined(CONFIG_BLACKFIN) + !defined(CONFIG_BLACKFIN) && !defined(CONFIG_M68K) static int reserve_video(void) { /* reserve memory for video display (always full pages) */ @@ -968,7 +968,7 @@ static init_fnc_t init_sequence_f[] = { /* TODO: Why the dependency on CONFIG_8xx? */ #if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) || defined(CONFIG_8xx)) && \ !defined(CONFIG_ARM) && !defined(CONFIG_X86) && \ - !defined(CONFIG_BLACKFIN) + !defined(CONFIG_BLACKFIN) && !defined(CONFIG_M68K) reserve_video, #endif #if !defined(CONFIG_BLACKFIN) && !defined(CONFIG_NIOS2) diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index a100d9f..6d7c5f9 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -202,7 +202,7 @@ /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ -#define CONFIG_ENV_OFFSET 0x8000 +#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_BASE + 0x40000) #define CONFIG_ENV_SIZE 0x1000 #define CONFIG_ENV_SECT_SIZE 0x8000 #define CONFIG_ENV_IS_IN_FLASH 1 -- 2.1.4

2 1

[U-Boot] [PATCH] common/board_f: move board_init_f_mem() from #else CONFIG_X86
by Alexey Brodkin 28 Mar '15

28 Mar '15

Purpose of this change is to make it possible to re-use code currently used on X86 solely for other architectures. For example: * init_sequence_f_r * board_init_f_r Even though board_init_f_mem() has nothing to do with any particular architecture it won't work (at least in current implementation) for X86. This is because on X86 "gd" is an alias to function get_fs_gd_ptr(), thus we cannot assign anything to it. So this change separates selection of board_init_f_mem() from X86 while keeping it disabled for X86 still. Signed-off-by: Alexey Brodkin <abrodkin(a)synopsys.com> Cc: Simon Glass <sjg(a)chromium.org> Cc: Tom Rini <trini(a)konsulko.com> --- common/board_f.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/common/board_f.c b/common/board_f.c index 55ede07..e537cd1 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -1080,7 +1080,9 @@ void board_init_f_r(void) /* NOTREACHED - board_init_r() does not return */ hang(); } -#else +#endif /* CONFIG_X86 */ + +#ifndef CONFIG_X86 ulong board_init_f_mem(ulong top) { /* Leave space for the stack we are running with now */ @@ -1098,4 +1100,4 @@ ulong board_init_f_mem(ulong top) return top; } -#endif /* CONFIG_X86 */ +#endif /* !CONFIG_X86 */ -- 2.1.0

3 3

[U-Boot] [PATCH 1/5] armv8: semihosting: do not inline trap call
by Linus Walleij 28 Mar '15

28 Mar '15

The semihosting trap call does not like being inlined, probably because that will mean register reordering screwing up the return value in r0, so tag this function "noinline". Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> --- arch/arm/lib/semihosting.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/lib/semihosting.c b/arch/arm/lib/semihosting.c index fd6d8573f560..d3f724b726e1 100644 --- a/arch/arm/lib/semihosting.c +++ b/arch/arm/lib/semihosting.c @@ -26,7 +26,7 @@ /* * Call the handler */ -static long smh_trap(unsigned int sysnum, void *addr) +static noinline long smh_trap(unsigned int sysnum, void *addr) { register long result asm("r0"); #if defined(CONFIG_ARM64) -- 1.9.3

2 9

Re: [U-Boot] [PATCH] Document config_distro_bootcmd environment variables for interactive booting.
by Stephen Warren 28 Mar '15

28 Mar '15

On 03/19/2015 02:53 PM, Karsten Merker wrote: > On Thu, Mar 19, 2015 at 01:53:14PM -0600, Stephen Warren wrote: > >>> +Interactively booting from a specific device at the u-boot prompt >>> +================================================================= >>> + >>> +For interactively booting from a user-selected device at the u-boot command >>> +prompt, the environment provides predefined bootcmd_<target> variables for >>> +every target defined in boot_targets, which can be run be the user. >>> + >>> +Examples: >>> + >>> + - run bootcmd_usb0 >>> + boots from the first USB mass storage device >>> + >>> + - run bootcmd_mmc1 >>> + boots from the second MMC device >> >> Should we enumerate all the possible device types, e.g. include >> bootcmd_sata0, bootcmd_ide0, ...? > > Hm, I suppose that depends on whether there is such a thing as > definitve list of all possible device types on all platforms and > how many elements are in this list. Are functionally equivalent > devices named the same on all platforms, i.e. is a PATA > interface always ide0, or could it be ide0 on one platform and > pata0 on another? The list is limited to the macros that are set up in config_distro_bootcmd.h. At least for the device types supported there, and the set of platforms which use that header so far, a particular device type is always named the same on all platforms. I'd expect a patch that added a new device type to the header to update the list in the documentation. >> In the text, perhaps rephrase bootcmd_<target> as >> bootcmd_<devtype><devnum>, and note that <devnum> is not optional in the >> command name? > > I had thought about explictly using devtype and devnum, but there > are device types such as pxe which do not have a devnum, so I > chose to use the generic <target> designation instead. I can > change that, but it might cause confusion so that a user would > try to use something like "run bootcmd_pxe0" which would not > work. I would therefore prefer the generic <target> designation. Ah yes. Perhaps continue to use <target> and then explain that when <target> is a storage device that can have multiple instances, the format of <target> must be <devtype><devnum>, but in other cases (pxe, dhcp), it is just a standalone name?

3 4

[U-Boot] [PATCH] config: Define BOOTP client architecture and VCI for ARMv8
by Thierry Reding 28 Mar '15

28 Mar '15

From: Thierry Reding <treding(a)nvidia.com> Reuse the 32-bit ARM client architecture and identify ARMv8 specifically by setting the BOOTP VCI string. Cc: Dennis Gilmore <dennis(a)ausil.us> Cc: Tom Rini <trini(a)konsulko.com> Signed-off-by: Thierry Reding <treding(a)nvidia.com> --- include/config_distro_defaults.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/include/config_distro_defaults.h b/include/config_distro_defaults.h index f4a01ba80642..8237239c0021 100644 --- a/include/config_distro_defaults.h +++ b/include/config_distro_defaults.h @@ -20,10 +20,12 @@ #define CONFIG_BOOTP_PXE #define CONFIG_BOOTP_SUBNETMASK -#if defined(__arm__) +#if defined(__arm__) || defined(__aarch64__) #define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 #if defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) #define CONFIG_BOOTP_VCI_STRING "U-boot.armv7" +#elif defined(__aarch64__) +#define CONFIG_BOOTP_VCI_STRING "U-boot.armv8" #else #define CONFIG_BOOTP_VCI_STRING "U-boot.arm" #endif -- 2.3.2

3 5

[U-Boot] [PATCH] config: Use booti instead of bootz on 64-bit ARM
by Thierry Reding 28 Mar '15

28 Mar '15

From: Thierry Reding <treding(a)nvidia.com> The bootz command doesn't work with Linux kernel images on 64-bit ARM. The replacement command with the same interface and functionality is booti. Cc: Dennis Gilmore <dennis(a)ausil.us> Cc: Tom Rini <trini(a)konsulko.com> Signed-off-by: Thierry Reding <treding(a)nvidia.com> --- include/config_distro_defaults.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/config_distro_defaults.h b/include/config_distro_defaults.h index 1ecc0bb0a99d..f4a01ba80642 100644 --- a/include/config_distro_defaults.h +++ b/include/config_distro_defaults.h @@ -31,7 +31,11 @@ #define CONFIG_OF_LIBFDT +#ifdef CONFIG_ARM64 +#define CONFIG_CMD_BOOTI +#else #define CONFIG_CMD_BOOTZ +#endif #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_EXT2 -- 2.3.2

3 4

[U-Boot] [PATCH 1/2] board/BuR/common: move I2C initialization from common part to board-specific
by Hannes Petermaier 28 Mar '15

28 Mar '15

From: Hannes Petermaier <hannes.petermaier(a)br-automation.com> At this time I2C and responsible pin-mux is setup during PMIC initialziation within common.c, this is possible because today PMIC is always connected on I2C0. In Future this will be changed, PMIC isn't anymore connected to bus0 in call cases. So we do following: - rename enable_i2c_pin_mux0 to enable_i2c_pin_mux to be generic for enabling pin-mux on different or more busses. - move the call to i2c_pin_mux and i2c_init from common.c to the specific board.c Signed-off-by: Hannes Petermaier <hannes.petermaier(a)br-automation.com> Signed-off-by: Hannes Petermaier <oe5hpm(a)oevsv.at> --- board/BuR/common/bur_common.h | 2 +- board/BuR/common/common.c | 4 ---- board/BuR/kwb/board.c | 3 ++- board/BuR/kwb/mux.c | 2 +- board/BuR/tseries/board.c | 4 ++++ board/BuR/tseries/mux.c | 2 +- 6 files changed, 9 insertions(+), 8 deletions(-) diff --git a/board/BuR/common/bur_common.h b/board/BuR/common/bur_common.h index 39afbba..3061e4c 100644 --- a/board/BuR/common/bur_common.h +++ b/board/BuR/common/bur_common.h @@ -19,7 +19,7 @@ void br_summaryscreen(void); void blink(u32 blinks, u32 intervall, u32 pin); void pmicsetup(u32 mpupll); void enable_uart0_pin_mux(void); -void enable_i2c0_pin_mux(void); +void enable_i2c_pin_mux(void); void enable_board_pin_mux(void); int board_eth_init(bd_t *bis); diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c index 5ff8a7e..91834eb 100644 --- a/board/BuR/common/common.c +++ b/board/BuR/common/common.c @@ -461,10 +461,6 @@ void pmicsetup(u32 mpupll) int mpu_vdd; int usb_cur_lim; - /* setup I2C */ - enable_i2c0_pin_mux(); - i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); - if (i2c_probe(TPS65217_CHIP_PM)) { puts("PMIC (0x24) not found! skip further initalization.\n"); return; diff --git a/board/BuR/kwb/board.c b/board/BuR/kwb/board.c index 892311e..6eed7e0 100644 --- a/board/BuR/kwb/board.c +++ b/board/BuR/kwb/board.c @@ -124,7 +124,8 @@ void am33xx_spl_board_init(void) gpio_direction_output(LCD_PWR, 0); /* setup I2C */ - enable_i2c0_pin_mux(); + enable_i2c_pin_mux(); + i2c_set_bus_num(0); i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); /* power-ON 3V3 via Resetcontroller */ diff --git a/board/BuR/kwb/mux.c b/board/BuR/kwb/mux.c index 9f89b5e..2b1d8d3 100644 --- a/board/BuR/kwb/mux.c +++ b/board/BuR/kwb/mux.c @@ -180,7 +180,7 @@ void enable_uart0_pin_mux(void) configure_module_pin_mux(uart0_pin_mux); } -void enable_i2c0_pin_mux(void) +void enable_i2c_pin_mux(void) { configure_module_pin_mux(i2c0_pin_mux); } diff --git a/board/BuR/tseries/board.c b/board/BuR/tseries/board.c index 9402aa4..89e989f 100644 --- a/board/BuR/tseries/board.c +++ b/board/BuR/tseries/board.c @@ -123,6 +123,10 @@ void am33xx_spl_board_init(void) /* setup LCD-Pixel Clock */ writel(0x2, &cmdpll->clklcdcpixelclk); /* clock comes from perPLL M2 */ + /* setup I2C */ + enable_i2c_pin_mux(); + i2c_set_bus_num(0); + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); pmicsetup(0); } diff --git a/board/BuR/tseries/mux.c b/board/BuR/tseries/mux.c index 2c87a63..ac7e885 100644 --- a/board/BuR/tseries/mux.c +++ b/board/BuR/tseries/mux.c @@ -226,7 +226,7 @@ void enable_uart0_pin_mux(void) configure_module_pin_mux(uart0_pin_mux); } -void enable_i2c0_pin_mux(void) +void enable_i2c_pin_mux(void) { configure_module_pin_mux(i2c0_pin_mux); } -- 1.7.9.5

2 3

← Newer
1
...
20
21
22
23
24
25
26
...
64
Older →

Jump to page: