October 2015 - U-Boot

[U-Boot] Please pull u-boot-sunxi master
by Hans de Goede 03 Oct '15

03 Oct '15

Hi Tom, Here is what is hopefully really the final sunxi pull-req for v2015.10. This introduces just 1 new defconfig, we want this new defconfig in v2015.10 since it is a generic defconfig for so called q8 formfactor sunxi tablets, and we want to replace all the PCB revision specific defconfigs with a few generic ones since there are just too many variants. So we want to have generic configs for a13 / a23 / a33 based q8 tablets, current master already has them for a13 / a33, this commit makes the set complete, which allows us to start dropping the pcb revision specific ones in v2016.01. The following changes since commit fbb0c7bd92255bfcb13826a8ac81be6e2f94ba48: Merge branch 'master' of git://git.denx.de/u-boot-tegra (2015-10-02 20:35:49 -0400) are available in the git repository at: http://git.denx.de/u-boot-sunxi.git master for you to fetch changes up to 97fec7105c6d31f52026921e669ec78e1b7ca623: sunxi: Add generic defconfigs for A23 Q8 tablets with 800x480 LCD (2015-10-03 12:08:04 +0200) ---------------------------------------------------------------- Hans de Goede (1): sunxi: Add generic defconfigs for A23 Q8 tablets with 800x480 LCD arch/arm/dts/Makefile | 3 +- arch/arm/dts/sun8i-a23-q8-tablet.dts | 65 +++++++++++++++++++++++++++++++++ board/sunxi/MAINTAINERS | 1 + configs/q8_a23_tablet_800x480_defconfig | 25 +++++++++++++ 4 files changed, 93 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/sun8i-a23-q8-tablet.dts create mode 100644 configs/q8_a23_tablet_800x480_defconfig Regards, Hans

3 2

[U-Boot] [PATCH 1/2] sunxi: Add generic defconfigs for A23 Q8 tablets with 800x480 LCD
by Hans de Goede 03 Oct '15

03 Oct '15

The 7" Q8 tablet enclosure is used for a ton of slightly different cheap chinese tablets. There are some differences in which accelerometer / wifi is used, but other then that these are all the same from a u-boot / kernel pov. When we get to adding accelerometer support the plan is to add some kind of autodetection and mangle the dt accordingly (likely using the new quirks mechanism). For now this is a non issue as we do not yet have accelerometer support, and in the future, some sort of auto-detect is the way to go as we cannot expect users to exactly know what is inside their tablet. The dts files this commit adds are identical to the ones submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- arch/arm/dts/Makefile | 3 +- arch/arm/dts/sun8i-a23-q8-tablet.dts | 65 +++++++++++++++++++++++++++++++++ board/sunxi/MAINTAINERS | 1 + configs/q8_a23_tablet_800x480_defconfig | 25 +++++++++++++ 4 files changed, 93 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/sun8i-a23-q8-tablet.dts create mode 100644 configs/q8_a23_tablet_800x480_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index b51c4c6..6a053cc 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -154,7 +154,8 @@ dtb-$(CONFIG_MACH_SUN8I_A23) += \ sun8i-a23-evb.dtb \ sun8i-a23-gt90h-v4.dtb \ sun8i-a23-ippo-q8h-v5.dtb \ - sun8i-a23-ippo-q8h-v1.2.dtb + sun8i-a23-ippo-q8h-v1.2.dtb \ + sun8i-a23-q8-tablet.dtb dtb-$(CONFIG_MACH_SUN8I_A33) += \ sun8i-a33-et-q8-v1.6.dtb \ sun8i-a33-ga10h-v1.1.dtb \ diff --git a/arch/arm/dts/sun8i-a23-q8-tablet.dts b/arch/arm/dts/sun8i-a23-q8-tablet.dts new file mode 100644 index 0000000..6062ea7 --- /dev/null +++ b/arch/arm/dts/sun8i-a23-q8-tablet.dts @@ -0,0 +1,65 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede(a)redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a23.dtsi" +#include "sun8i-q8-common.dtsi" + +/ { + model = "Q8 A23 Tablet"; + compatible = "allwinner,q8-a23", "allwinner,sun8i-a23"; +}; + +/* + * FIXME for now we only support host mode and rely on u-boot to have + * turned on Vbus which is controlled by the axp223 pmic on the board. + * + * Once we have axp223 support we should switch to fully supporting otg. + */ +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index f7a837a..67a9d29 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -50,6 +50,7 @@ F: configs/ga10h_v1_1_defconfig F: configs/gt90h_v4_defconfig F: configs/Ippo_q8h_v1_2_defconfig F: configs/Ippo_q8h_v1_2_a33_1024x600_defconfig +F: configs/q8_a23_tablet_800x480_defconfig F: configs/q8_a33_tablet_800x480_defconfig F: configs/q8_a33_tablet_1024x600_defconfig F: include/configs/sun9i.h diff --git a/configs/q8_a23_tablet_800x480_defconfig b/configs/q8_a23_tablet_800x480_defconfig new file mode 100644 index 0000000..00c30dc --- /dev/null +++ b/configs/q8_a23_tablet_800x480_defconfig @@ -0,0 +1,25 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_A23=y +CONFIG_DRAM_CLK=432 +CONFIG_DRAM_ZQ=63306 +CONFIG_MMC0_CD_PIN="PB4" +CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" +CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_USB0_ID_DET="PH8" +CONFIG_AXP_GPIO=y +CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:15,ri:211,up:10,lo:22,hs:30,vs:13,sync:3,vmode:0" +CONFIG_VIDEO_LCD_DCLK_PHASE=0 +CONFIG_VIDEO_LCD_POWER="PH7" +CONFIG_VIDEO_LCD_BL_EN="PH6" +CONFIG_VIDEO_LCD_BL_PWM="PH0" +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-q8-tablet" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_AXP221_DLDO1_VOLT=3300 +CONFIG_AXP221_ALDO1_VOLT=3000 +CONFIG_USB_MUSB_HOST=y -- 2.5.0

2 4

[U-Boot] Pull request, u-boot-tegra/master
by Tom Warren 03 Oct '15

03 Oct '15

Tom, Please pull u-boot-tegra/master into U-Boot/master. Thanks! All tegra builds are OK (32-bit and 64-bit), and P2571 T210 64-bit boots to cmd prompt OK. The following changes since commit 1f8836396de8215b7f460616926052b32597bb29: Prepare v2015.10-rc4 (2015-09-28 16:57:42 -0400) are available in the git repository at: git://git.denx.de/u-boot-tegra.git master for you to fetch changes up to fe82857c4b1667fff8108eab77340ae76016215a: gpio: tegra: use named constants (2015-10-02 11:05:56 -0700) ---------------------------------------------------------------- Stephen Warren (6): ARM: tegra: p2371-2180: import latest pinmux ARM: tegra: fix GPIO init table programming ARM: tegra: don't enable GPIOs until direction is set ARM: tegra: expand all SPL sizes to be consistent gpio: tegra: remove unused type gpio: tegra: use named constants board/nvidia/p2371-2180/pinmux-config-p2371-2180.h | 56 +++++++++++++-------- drivers/gpio/tegra_gpio.c | 58 ++++++++++------------ include/configs/tegra114-common.h | 2 +- include/configs/tegra20-common.h | 2 +- include/configs/tegra210-common.h | 2 +- include/configs/tegra30-common.h | 2 +- 6 files changed, 65 insertions(+), 57 deletions(-)

2 1

[U-Boot] [PULL] Please pull u-boot-imx
by Stefano Babic 03 Oct '15

03 Oct '15

Hi Tom, please pull from u-boot-imx, thanks ! The following changes since commit 1f8836396de8215b7f460616926052b32597bb29: Prepare v2015.10-rc4 (2015-09-28 16:57:42 -0400) are available in the git repository at: git://www.denx.de/git/u-boot-imx.git master for you to fetch changes up to 7daaac5281db0788cde895a0add38ad5195b5be1: mx6sabre_common: Add DFU support (2015-10-02 10:51:20 +0200) ---------------------------------------------------------------- Albert ARIBAUD $3ADEV$ (1): vf610: add support for Phytec PCM052 Albert ARIBAUD \$3ADEV\$ (2): vf610: refactor DDRMC code I2C: mxc_i2c: make I2C1 and I2C2 optional Fabio Estevam (1): mx6sabre_common: Add DFU support Peng Fan (1): imx: mx6: correct enable_fec_anatop_clock Soeren Moch (1): tbs2910: explicitly set boot address README | 8 +- arch/arm/Kconfig | 5 + arch/arm/cpu/armv7/mx6/clock.c | 2 + arch/arm/imx-common/ddrmc-vf610.c | 193 +++++++++++++------------------ arch/arm/include/asm/arch-vf610/ddrmc-vf610.h | 40 ++++--- arch/arm/include/asm/arch-vf610/imx-regs.h | 6 +- board/freescale/vf610twr/vf610twr.c | 156 ++++++++++++++++--------- board/phytec/pcm052/Kconfig | 15 +++ board/phytec/pcm052/MAINTAINERS | 6 + board/phytec/pcm052/Makefile | 7 ++ board/phytec/pcm052/imximage.cfg | 17 +++ board/phytec/pcm052/pcm052.c | 515 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ board/toradex/colibri_vf/colibri_vf.c | 144 ++++++++++++++++------- configs/pcm052_defconfig | 6 + drivers/i2c/mxc_i2c.c | 6 + include/configs/apf27.h | 2 + include/configs/aristainetos-common.h | 2 + include/configs/cgtqmx6eval.h | 2 + include/configs/cm_fx6.h | 2 + include/configs/embestmx6boards.h | 2 + include/configs/flea3.h | 2 + include/configs/gw_ventana.h | 2 + include/configs/imx31_phycore.h | 2 + include/configs/ls1021aqds.h | 2 + include/configs/ls1021atwr.h | 2 + include/configs/ls2085a_common.h | 2 + include/configs/m53evk.h | 2 + include/configs/mx25pdk.h | 2 + include/configs/mx35pdk.h | 2 + include/configs/mx53ard.h | 2 + include/configs/mx53evk.h | 2 + include/configs/mx53loco.h | 2 + include/configs/mx53smd.h | 2 + include/configs/mx6qsabreauto.h | 2 + include/configs/mx6sabre_common.h | 10 ++ include/configs/mx6sabresd.h | 2 + include/configs/mx6slevk.h | 2 + include/configs/mx6sxsabresd.h | 2 + include/configs/mx6ul_14x14_evk.h | 2 + include/configs/mx7dsabresd.h | 2 +- include/configs/nitrogen6x.h | 2 + include/configs/novena.h | 2 + include/configs/ot1200.h | 2 + include/configs/pcm052.h | 231 +++++++++++++++++++++++++++++++++++++ include/configs/platinum.h | 2 + include/configs/tbs2910.h | 4 +- include/configs/titanium.h | 2 + include/configs/tqma6.h | 2 + include/configs/usbarmory.h | 2 + include/configs/vf610twr.h | 2 + include/configs/wandboard.h | 2 + include/configs/warp.h | 2 + include/configs/woodburn_common.h | 2 + 53 files changed, 1212 insertions(+), 229 deletions(-) create mode 100644 board/phytec/pcm052/Kconfig create mode 100644 board/phytec/pcm052/MAINTAINERS create mode 100644 board/phytec/pcm052/Makefile create mode 100644 board/phytec/pcm052/imximage.cfg create mode 100644 board/phytec/pcm052/pcm052.c create mode 100644 configs/pcm052_defconfig create mode 100644 include/configs/pcm052.h -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic(a)denx.de =====================================================================

2 1

[U-Boot] [PULL] u-boot-atmel/master -> u-boot/master
by Andreas Bießmann 03 Oct '15

03 Oct '15

Hi Tom, here are two small fixes for v2015.10 regarding atmel boards. Andreas The following changes since commit 1f8836396de8215b7f460616926052b32597bb29: Prepare v2015.10-rc4 (2015-09-28 16:57:42 -0400) are available in the git repository at: git://git.denx.de/u-boot-atmel.git master for you to fetch changes up to aca5d0830aab91680c2ef44e9cb2999cbea19f2f: arm, at91: small updates for the smartweb board (2015-10-01 09:34:59 +0200) ---------------------------------------------------------------- Heiko Schocher (1): arm, at91: small updates for the smartweb board Josh Wu (1): ARM: at91: sama5: add support for CONFIG_ENV_IS_IN_MMC board/siemens/smartweb/smartweb.c | 25 ++++++++++++++----------- include/configs/at91-sama5_common.h | 8 ++++++++ include/configs/smartweb.h | 4 ++++ 3 files changed, 26 insertions(+), 11 deletions(-)

2 1

[U-Boot] Please pull u-boot-marvell master
by Luka Perkov 03 Oct '15

03 Oct '15

Hi Tom, can you please pull these three commits containing two mvebu related fixes and one handy kwboot tool feature? The following changes since commit 1f8836396de8215b7f460616926052b32597bb29: Prepare v2015.10-rc4 (2015-09-28 16:57:42 -0400) are available in the git repository at: git://git.denx.de/u-boot-marvell.git for you to fetch changes up to e29f1db3dd96901fb54d8faefed8cd2987704b68: tools: kwboot: Add support for UART boot mode patching for Armada XP/38x (2015-10-01 02:02:06 +0200) ---------------------------------------------------------------- Stefan Roese (3): arm: mvebu: Fix internal register config on A38x arm: mvebu: timer.c: Explicitly move "init_done" var to data section tools: kwboot: Add support for UART boot mode patching for Armada XP/38x arch/arm/mach-mvebu/cpu.c | 36 +++++++----- arch/arm/mach-mvebu/timer.c | 2 +- tools/kwbimage.c | 94 ------------------------------- tools/kwbimage.h | 133 ++++++++++++++++++++++++++++++++------------ tools/kwboot.c | 37 ++++++++---- 5 files changed, 148 insertions(+), 154 deletions(-) Regards, Luka

2 1

[U-Boot] Pull request: u-boot-net.git master
by Joe Hershberger 03 Oct '15

03 Oct '15

The following changes since commit 1f8836396de8215b7f460616926052b32597bb29: Prepare v2015.10-rc4 (2015-09-28 16:57:42 -0400) are available in the git repository at: git://git.denx.de/u-boot-net.git master for you to fetch changes up to 8ac46a98618ea21cf9900961fcff9cf803198271: sunxi: add NetConsole by default for Banana Pi/Pro (2015-09-29 21:54:46 -0500) ---------------------------------------------------------------- Bernhard Nortmann (5): net: expose eth_is_active() function to test network device state net: fix netconsole when CONFIG_DM_ETH is set net: avoid eth_unregister() call when function is unavailable net: support NETCONSOLE option via Kconfig sunxi: add NetConsole by default for Banana Pi/Pro Mugunthan V N (1): net: phy: on phy device create do not initialize link to 1 common/bootm.c | 2 ++ configs/Bananapi_defconfig | 1 + configs/Bananapro_defconfig | 1 + drivers/net/netconsole.c | 14 +++++++++++--- drivers/net/phy/phy.c | 2 +- include/net.h | 4 ++++ net/Kconfig | 6 ++++++ net/eth.c | 18 +++++++++++++++++- 8 files changed, 43 insertions(+), 5 deletions(-)

2 1

[U-Boot] Please pull u-boot-sunxi master
by Hans de Goede 03 Oct '15

03 Oct '15

Hi Tom, Here is a (the final?) sunxi pull-req for v2015.10, highlights: -Misc fixes / tweaks -Add support for 2 new boards The following changes since commit 1f8836396de8215b7f460616926052b32597bb29: Prepare v2015.10-rc4 (2015-09-28 16:57:42 -0400) are available in the git repository at: http://git.denx.de/u-boot-sunxi.git master for you to fetch changes up to 46f166caad48ed38f6ccc0c2fc6d1828d15dacb2: sunxi: Add generic defconfigs for A33 Q8 tablets with 1024x600 / 800x480 LCD (2015-09-29 11:50:44 +0200) ---------------------------------------------------------------- Bernhard Nortmann (4): sunxi: move SPL-related definitions to platform-specific include sunxi: (mksunxiboot) signature to indicate "sunxi" SPL variant sunxi: retrieve FEL-provided values to environment variables sunxi: add "fel" boot target Hans de Goede (7): sunxi: Rename A10s-Wobo-i5_defconfig to Wobo_i5_defconfig sunxi: sunxi-common.h cleanup sunxi: Tweak various memory addresses sunxi: Simplify spl board_init_f function sunxi_nand_spl: Be smarter about where to look for backup u-boot.bin sunxi: mmc: Fix clk-delay settings sunxi: Add generic defconfigs for A33 Q8 tablets with 1024x600 / 800x480 LCD arch/arm/cpu/armv7/sunxi/board.c | 8 +-- arch/arm/dts/Makefile | 1 + arch/arm/dts/sun8i-a33-q8-tablet.dts | 65 +++++++++++++++++ arch/arm/dts/sun8i-q8-common.dtsi | 84 ++++++++++++++++++++++ arch/arm/include/asm/arch-sunxi/spl.h | 54 ++++++++++---- board/sunxi/MAINTAINERS | 5 +- board/sunxi/board.c | 35 +++++++++ .../{A10s-Wobo-i5_defconfig => Wobo_i5_defconfig} | 0 configs/q8_a33_tablet_1024x600_defconfig | 25 +++++++ configs/q8_a33_tablet_800x480_defconfig | 25 +++++++ drivers/mmc/sunxi_mmc.c | 16 ++++- drivers/mtd/nand/sunxi_nand_spl.c | 26 +++++-- include/configs/sunxi-common.h | 42 +++++------ tools/mksunxiboot.c | 21 ++---- 14 files changed, 341 insertions(+), 66 deletions(-) create mode 100644 arch/arm/dts/sun8i-a33-q8-tablet.dts create mode 100644 arch/arm/dts/sun8i-q8-common.dtsi rename configs/{A10s-Wobo-i5_defconfig => Wobo_i5_defconfig} (100%) create mode 100644 configs/q8_a33_tablet_1024x600_defconfig create mode 100644 configs/q8_a33_tablet_800x480_defconfig Regards, Hans

2 1

[U-Boot] Please pull u-boot-x86.git (take 2)
by Simon Glass 03 Oct '15

03 Oct '15

Hi Tom. This include one more bug fix. The following changes since commit 1f8836396de8215b7f460616926052b32597bb29: Prepare v2015.10-rc4 (2015-09-28 16:57:42 -0400) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 196193a4d4963a8dde00c7cdd0ec83b60ea61e61: x86: fsp: Report correct number of E820 table entries (2015-09-28 21:56:27 -0700) ---------------------------------------------------------------- Bin Meng (1): x86: fsp: Report correct number of E820 table entries Simon Glass (1): x86: chromebook_link: Expand early malloc() memory arch/x86/lib/fsp/fsp_dram.c | 3 ++- configs/chromebook_link_defconfig | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) Regards, Simon

2 1

[U-Boot] U-Boot GPIO console command
by Francisco Aguerre 02 Oct '15

02 Oct '15

Hello, I have a rev B BeagleBone Black which I have been using for over a year as a development platform for a pseudo-clone board we are developing. We are using QNX as our OS. Lately I have been tinkering with U-Boot to learn how the boot process works and configure our board properly. I cloned the U-boot git repository and built the 2015.10-rc2 version. The board boots fine and now the MPU frequency gets configured at 1GHz, but the thing is that the gpio console command doesn't seem to work anymore. Previously I used the 2013.04 version of U-Boot and could toggle leds using the gpio comand (i.e. "gpio toggle 54" ), but now the same command just returns an error message "Command 'gpio' failed: Error -22". Is there anything I've missed to make this command work properly? For building u-boot I used the am335x_boneblack_defconfig configuration. Regards, Francisco

1 0