January 2015 - U-Boot

[U-Boot] [PATCH 1/2] mtd:mxs:nand calculate ecc strength dynamically
by Peng Fan 28 Jan '15

28 Jan '15

Calculate ecc strength according oobsize, but not hardcoded which is not aligned with kernel driver Signed-off-by: Peng Fan <Peng.Fan(a)freescale.com> Signed-off-by: Ye.Li <b37916(a)freescale.com> --- drivers/mtd/nand/mxs_nand.c | 22 ++++------------------ 1 file changed, 4 insertions(+), 18 deletions(-) diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c index 7a064ab..a45fcf9 100644 --- a/drivers/mtd/nand/mxs_nand.c +++ b/drivers/mtd/nand/mxs_nand.c @@ -146,26 +146,12 @@ static uint32_t mxs_nand_aux_status_offset(void) static inline uint32_t mxs_nand_get_ecc_strength(uint32_t page_data_size, uint32_t page_oob_size) { - if (page_data_size == 2048) { - if (page_oob_size == 64) - return 8; + int ecc_strength; - if (page_oob_size == 112) - return 14; - } - - if (page_data_size == 4096) { - if (page_oob_size == 128) - return 8; - - if (page_oob_size == 218) - return 16; + ecc_strength = ((page_oob_size - MXS_NAND_METADATA_SIZE) * 8) + / (13 * mxs_nand_ecc_chunk_cnt(page_data_size)); - if (page_oob_size == 224) - return 16; - } - - return 0; + return round_down(ecc_strength, 2); } static inline uint32_t mxs_nand_get_mark_offset(uint32_t page_data_size, -- 1.8.4

4 10

[U-Boot] [RFC PATCH] ARM: Activate hypervisor mode for TI am5726 (OMAP5/dra7)
by Frank Bormann 27 Jan '15

27 Jan '15

Hi, I was wondering if I could have any input on the patch below activating hypervisor mode on TI OMAP5-based SoC. The patch essentially uses the on-chip ROM code API to enable hypervisor mode on the primary A15 core and goes in tandem with a Linux kernel patch recently accepted into omap-for-v3.19/fixes that checks hypervisor mode on the primary A15 core and sets it accordingly on additional cores being activated. I am aware that there is some development going on for ARM's PSCI that amongst other things is supposed to deal with hypervisor activation in a more generic fashion and I am wondering if there is any preference on how to properly activate hypervisor mode for the TI SoCs mentioned above. Thanks, Frank --------------- u-boot patch: Enable hypervisor mode for AM5726 --- arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index 86c0e42..696da4b 100644 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -19,7 +19,20 @@ ENTRY(save_boot_params) ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS str r0, [r1] +/* + * Turn on hypervisor mode on CPU#0 + */ +#ifdef CONFIG_DRA7XX_HYPERVISOR_ON + mov r0, lr @ This is a great place to switch into hyp mode + @ only the r0 was needed from _start and is now + @ free; all other general purpose registers were + @ already free. + ldr r12, =0x102 @ Set PL310 control register - value in R0 + .word 0xe1600070 @ SMC #0 - hand assembled because -march=armv5 + @ call ROM Code API to set control register +#else bx lr +#endif /* CONFIG_DRA7XX_HYPERVISOR_ON */ ENDPROC(save_boot_params) ENTRY(set_pl310_ctrl_reg) --------------- Link to the corresponding Linux kernel patch: http://linux-kernel.2935.n7.nabble.com/PATCH-ARM-omap5-dra7xx-Enable-bootin…

2 1

[U-Boot] [RFC PATCH 0/5] avr32: add generic board
by Andreas Bießmann 27 Jan '15

27 Jan '15

This is the first attempt to add generic board support to avr32 architecture. It has at least one relevant part for other manual reloc architectures. This series is currently runtime tested on grasshhopper only. I expect some changes regarding LCD support when testing the code on atstk1002. The DMA stuff is not tested yet but I expect no serios things here. The code is not run through checkpatch nor buildman at the time of writing. Comments welcome! Especially for the TLB stuff placed in board_init_r. Andreas Bießmann Andreas Bießmann (5): avr32: use dlmalloc for DMA buffers avr32: rename cpu_init() -> arch_cpu_init() common/board_r: manual relocation for cmd table avr32: add generic board support grasshopper: enable generic board arch/avr32/config.mk | 3 ++ arch/avr32/cpu/cpu.c | 2 +- arch/avr32/cpu/u-boot.lds | 2 ++ arch/avr32/include/asm/config.h | 1 + arch/avr32/include/asm/dma-mapping.h | 7 ++++- arch/avr32/include/asm/u-boot.h | 9 ++++++ arch/avr32/lib/Makefile | 2 ++ arch/avr32/lib/board.c | 53 +--------------------------------- arch/avr32/lib/interrupts.c | 5 ++++ common/board_f.c | 13 +++++++-- common/board_r.c | 34 ++++++++++++++++++++-- include/asm-generic/u-boot.h | 4 +++ include/configs/atngw100.h | 1 - include/configs/atngw100mkii.h | 1 - include/configs/atstk1002.h | 1 - include/configs/atstk1006.h | 1 - include/configs/favr-32-ezkit.h | 1 - include/configs/grasshopper.h | 5 +++- include/configs/hammerhead.h | 1 - include/configs/mimc200.h | 1 - 20 files changed, 80 insertions(+), 67 deletions(-) -- 1.7.10.4

4 11

[U-Boot] [PATCH v2] spl: Change debug to printf for "Unsupported boot-device"
by Stefan Roese 27 Jan '15

27 Jan '15

We had the problem on an AM33xx platform, that SPL detected an unsupported boot-device. But since this message is a debug message it took a bit of time to really know, where the hangup in SPL resulted from. So let's change this debug message to a printf and also print the detected boot-device that is not supported. This makes debugging of such cases much easier. Signed-off-by: Stefan Roese <sr(a)denx.de> Cc: Wolfgang Denk <wd(a)denx.de> Cc: Tom Rini <trini(a)ti.com> --- v2: - Added #if check so that the printf is only included when serial support is enabled. - Compile tested on all ARM boards common/spl/spl.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/common/spl/spl.c b/common/spl/spl.c index d85bab3..cef7bca 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -216,7 +216,9 @@ void board_init_r(gd_t *dummy1, ulong dummy2) break; #endif default: - debug("SPL: Un-supported Boot Device\n"); +#if defined(CONFIG_SPL_SERIAL_SUPPORT) && defined(CONFIG_SPL_LIBCOMMON_SUPPORT) + printf("SPL: Unsupported Boot Device %d\n", boot_device); +#endif hang(); } -- 2.1.3

4 7

[U-Boot] [PATCH] armv8/vexpress64: make multientry conditional
by Linus Walleij 27 Jan '15

27 Jan '15

While the Freescale ARMv8 board LS2085A will enter U-Boot both on a master and a secondary (slave) CPU, this is not the common behaviour on ARMv8 platforms. The norm is that U-Boot is entered from the master CPU only, while the other CPUs are kept in WFI (wait for interrupt) state. The code determining which CPU we are running on is using the MPIDR register, but the definition of that register varies with platform to some extent, and handling multi-cluster platforms (such as the Juno) will become cumbersome. It is better to only enable the multiple entry code on machines that actually need it and disable it by default. Make the single entry default and add a special CONFIG_ARMV8_MULTIENTRY config option to be used by the platforms that need multientry and set it for the LS2085A. Delete all use of the CPU_RELEASE_ADDR from the Vexpress64 boards as it is just totally unused and misleading, and make it conditional in the generic start.S code. This makes the Juno platform start U-Boot properly. Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> --- This patch applied on top of the other patch series send, ending with [PATCH 4/4] vexpress64: support the Juno Development Platform Please apply it on top of these if the patch seems OK. --- arch/arm/cpu/armv8/start.S | 8 ++++---- arch/arm/include/asm/macro.h | 8 ++++++++ board/armltd/vexpress64/vexpress64.c | 6 ------ include/configs/ls2085a_common.h | 5 +++++ include/configs/vexpress_aemv8a.h | 8 -------- 5 files changed, 17 insertions(+), 18 deletions(-) diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S index 4b11aa4f2227..9b439f30b779 100644 --- a/arch/arm/cpu/armv8/start.S +++ b/arch/arm/cpu/armv8/start.S @@ -77,6 +77,7 @@ reset: /* Processor specific initialization */ bl lowlevel_init +#ifdef CONFIG_ARMV8_MULTIENTRY branch_if_master x0, x1, master_cpu /* @@ -88,11 +89,10 @@ slave_cpu: ldr x0, [x1] cbz x0, slave_cpu br x0 /* branch to the given address */ - - /* - * Master CPU - */ master_cpu: + /* On the master CPU */ +#endif /* CONFIG_ARMV8_MULTIENTRY */ + bl _main /*-----------------------------------------------------------------------*/ diff --git a/arch/arm/include/asm/macro.h b/arch/arm/include/asm/macro.h index 1c8c4251ee0c..3b3146ab2239 100644 --- a/arch/arm/include/asm/macro.h +++ b/arch/arm/include/asm/macro.h @@ -78,6 +78,8 @@ lr .req x30 * choose processor with all zero affinity value as the master. */ .macro branch_if_slave, xreg, slave_label +#ifdef CONFIG_ARMV8_MULTIENTRY + /* NOTE: MPIDR handling will be erroneous on multi-cluster machines */ mrs \xreg, mpidr_el1 tst \xreg, #0xff /* Test Affinity 0 */ b.ne \slave_label @@ -90,6 +92,7 @@ lr .req x30 lsr \xreg, \xreg, #16 tst \xreg, #0xff /* Test Affinity 3 */ b.ne \slave_label +#endif .endm /* @@ -97,12 +100,17 @@ lr .req x30 * choose processor with all zero affinity value as the master. */ .macro branch_if_master, xreg1, xreg2, master_label +#ifdef CONFIG_ARMV8_MULTIENTRY + /* NOTE: MPIDR handling will be erroneous on multi-cluster machines */ mrs \xreg1, mpidr_el1 lsr \xreg2, \xreg1, #32 lsl \xreg1, \xreg1, #40 lsr \xreg1, \xreg1, #40 orr \xreg1, \xreg1, \xreg2 cbz \xreg1, \master_label +#else + b \master_label +#endif .endm .macro armv8_switch_to_el2_m, xreg1 diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c index 58973185ecda..7ab000cca77b 100644 --- a/board/armltd/vexpress64/vexpress64.c +++ b/board/armltd/vexpress64/vexpress64.c @@ -22,12 +22,6 @@ int board_init(void) int dram_init(void) { - /* - * Clear spin table so that secondary processors - * observe the correct value after waken up from wfe. - */ - *(unsigned long *)CPU_RELEASE_ADDR = 0; - gd->ram_size = PHYS_SDRAM_1_SIZE; return 0; } diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h index 6fe032c9ff64..7f6f6f34cfa4 100644 --- a/include/configs/ls2085a_common.h +++ b/include/configs/ls2085a_common.h @@ -8,6 +8,11 @@ #define __LS2_COMMON_H #define CONFIG_SYS_GENERIC_BOARD +/* + * These machines will enter U-Boot on the master CPU and also + * a secondary CPU, so we need to handle that. + */ +#define CONFIG_ARMV8_MULTIENTRY #define CONFIG_REMAKE_ELF #define CONFIG_FSL_LSCH3 diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 7fb28a54ba17..e276fff7e442 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -56,14 +56,6 @@ /* Flat Device Tree Definitions */ #define CONFIG_OF_LIBFDT - -/* SMP Spin Table Definitions */ -#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP -#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000) -#else -#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) -#endif - /* CS register bases for the original memory map. */ #define V2M_PA_CS0 0x00000000 #define V2M_PA_CS1 0x14000000 -- 1.9.3

2 1

[U-Boot] Please pull u-boot-x86
by Simon Glass 27 Jan '15

27 Jan '15

Hi Tom, The following changes since commit 37b608a52dcb13312a4f7ccea199cd6bac76d298: powerpc: remove icecube_5200, Lite5200, cpci5200, mecp5200, pf5200 (2015-01-23 16:56:09 -0500) are available in the git repository at: http://git.denx.de/u-boot-x86.git for you to fetch changes up to e43ade3749ff10bc313f33bf23705465e4163896: x86: config: chromebook_link: Enable environment (2015-01-24 06:13:46 -0700) ---------------------------------------------------------------- Bin Meng (5): x86: ahci: Make sure interface is not busy after enabling the port x86: Add missing DECLARE_GLOBAL_DATA_PTR for mtrr.c x86: Save mtrr support flag in global data x86: Test mtrr support flag before accessing mtrr msr x86: Fix various code format issues in start16.S Sebastien Ronsse (1): x86: Fix out of bounds irq handlers access Simon Glass (22): bios_emulator: Fix an #ifdef typo in the header file x86: Correct endianness isues in pci_rom x86: Support ROMs on other archs bios_emulator: Don't display error when emulator terminates bios_emulator: Add some VESA interface debugging x86: pci: Don't stop when we get a vendor/device mismatch x86: Add a VESA video driver x86: Drop the x86_fb driver x86: Access the VGA ROM when needed x86: video: Add support for CONFIG_CONSOLE_SCROLL_LINES x86: config: Always scroll the display by 5 lines, for speed x86: dts: Add compatible string for Intel ICH9 SPI controller net: Add a separate file for IP checksumming x86: Use ipchecksum from net/ x86: rtc: mc146818: Add helpers to read/write CMOS RAM x86: spi: Add device tree support Allow architecture-specific memory reservation x86: dts: Add SPI flash MRC details for chromebook_link x86: Implement a cache for Memory Reference Code parameters x86: config: Enable hook for saving MRC configuration x86: ivybridge: Drop the Kconfig MRC cache information x86: config: chromebook_link: Enable environment Sjoerd Simons (1): pci: tegra: Fix port information parsing arch/x86/cpu/coreboot/Makefile | 1 - arch/x86/cpu/coreboot/coreboot.c | 5 ++++ arch/x86/cpu/coreboot/ipchecksum.c | 55 ---------------------------------- arch/x86/cpu/coreboot/tables.c | 8 ++--- arch/x86/cpu/cpu.c | 7 +++++ arch/x86/cpu/ivybridge/Kconfig | 28 ----------------- arch/x86/cpu/ivybridge/Makefile | 1 + arch/x86/cpu/ivybridge/mrccache.c | 156 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/x86/cpu/ivybridge/sdram.c | 253 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/x86/cpu/mtrr.c | 14 +++++++++ arch/x86/cpu/start16.S | 20 ++++++------- arch/x86/dts/chromebook_link.dts | 15 +++++++++- arch/x86/include/asm/arch-coreboot/ipchecksum.h | 37 ----------------------- arch/x86/include/asm/arch-ivybridge/mrccache.h | 51 +++++++++++++++++++++++++++++++ arch/x86/include/asm/global_data.h | 16 ++++++---- arch/x86/include/asm/mtrr.h | 5 +++- arch/x86/include/asm/u-boot-x86.h | 2 ++ arch/x86/lib/init_helpers.c | 4 ++- arch/x86/lib/interrupts.c | 2 +- common/board_f.c | 7 +++++ configs/chromebook_link_defconfig | 2 +- drivers/bios_emulator/atibios.c | 161 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------- drivers/bios_emulator/include/x86emu/debug.h | 2 +- drivers/bios_emulator/x86emu/ops.c | 2 +- drivers/block/ahci.c | 20 ++++++++++++- drivers/pci/pci_auto.c | 28 ++++++++++++++++- drivers/pci/pci_rom.c | 40 +++++++++++++++++-------- drivers/pci/pci_tegra.c | 5 ++-- drivers/rtc/mc146818.c | 121 ++++++++++++++++++++++++++++++++++++++++++++------------------------------ drivers/spi/ich.c | 7 +++++ drivers/video/Kconfig | 7 +++-- drivers/video/Makefile | 2 +- drivers/video/cfb_console.c | 26 ++++++++++------ drivers/video/vesa_fb.c | 64 +++++++++++++++++++++++++++++++++++++++ drivers/video/x86_fb.c | 38 ----------------------- include/configs/chromebook_link.h | 8 +++++ include/configs/x86-common.h | 2 ++ include/fdtdec.h | 1 + include/net.h | 30 +++++++++++++++++++ include/pci.h | 9 ++++++ include/pci_rom.h | 1 - include/rtc.h | 32 ++++++++++++++++++++ include/vbe.h | 9 ++++-- lib/fdtdec.c | 1 + net/Makefile | 1 + net/checksum.c | 60 +++++++++++++++++++++++++++++++++++++ 46 files changed, 1078 insertions(+), 288 deletions(-) delete mode 100644 arch/x86/cpu/coreboot/ipchecksum.c create mode 100644 arch/x86/cpu/ivybridge/mrccache.c delete mode 100644 arch/x86/include/asm/arch-coreboot/ipchecksum.h create mode 100644 arch/x86/include/asm/arch-ivybridge/mrccache.h create mode 100644 drivers/video/vesa_fb.c delete mode 100644 drivers/video/x86_fb.c create mode 100644 net/checksum.c Regards, Simon

2 1

[U-Boot] [PULL] u-boot-atmel/master -> u-boot/master
by Andreas Bießmann 27 Jan '15

27 Jan '15

The following changes since commit ab77f24119e80257de4ab017b877f92f96980562: Merge branch 'master' of git://git.denx.de/u-boot-ti (2015-01-16 10:25:01 -0500) are available in the git repository at: git://git.denx.de/u-boot-atmel.git master for you to fetch changes up to 52305a829cd927aca2eb4a15985c567e98f562b9: ARM: atmel: sama5d4_xplained: enable usb ethernet gadget (2015-01-19 15:02:48 +0100) ---------------------------------------------------------------- Bo Shen (6): ARM: atmel: sama5d4: add usb platform data ARM: atmel: sama5d4: add usb device initial code ARM: atmel: sama5d4ek: add option for usb ethernet gadget ARM: atmel: sama5d4ek: enable usb ethernet gadget ARM: atmel: sama5d4_xplained: add option for usb ethernet gadget ARM: atmel: sama5d4_xplained: enable usb ethernet gadget Heiko Schocher (5): arm, arm926ejs: make thumb mode compileable arm, at91: enable thumb mode for taurus board in SPL taurus, spl: erase also spi flash if recovery button is pressed arm, at91: corvus board updates arm, at91, axm: add SPL support for axm Simon Glass (1): arm: at91: snapper9260: Drop invalid CONFIG_SKIP_RELOCATE_UBOOT Wu, Josh (1): ARM: at91: sama5d3_xplained: spl: enable PMECC header generation arch/arm/cpu/arm926ejs/cpu.c | 2 ++ arch/arm/cpu/armv7/at91/sama5d4_devices.c | 16 +++++++++++++++ arch/arm/include/asm/arch-at91/atmel_usba_udc.h | 2 +- arch/arm/lib/cache.c | 2 ++ board/atmel/sama5d4_xplained/sama5d4_xplained.c | 11 +++++++++++ board/atmel/sama5d4ek/sama5d4ek.c | 11 +++++++++++ board/siemens/corvus/board.c | 12 +++++++----- board/siemens/taurus/taurus.c | 24 ++++++++++++++--------- configs/axm_defconfig | 5 +++-- include/configs/corvus.h | 4 ++-- include/configs/sama5d3_xplained.h | 1 + include/configs/sama5d4_xplained.h | 8 ++++++++ include/configs/sama5d4ek.h | 8 ++++++++ include/configs/snapper9260.h | 1 - include/configs/taurus.h | 23 +++++++++++++++++++++- 15 files changed, 109 insertions(+), 21 deletions(-)

2 1

[U-Boot] [GIT PULL] Zynq SoC changes
by Michal Simek 27 Jan '15

27 Jan '15

Hi Tom, please pull these patches to your tree. I have added there 2 patches for serial. Zynq is only one platform which is using this driver. Thanks, Michal The following changes since commit 92fa7f53f1f3f03296f8ffb14bdf1baefab83368: Prepare v2015.01 (2015-01-12 09:39:08 -0500) are available in the git repository at: git://www.denx.de/git/u-boot-microblaze.git zynq for you to fetch changes up to 025216f78e0dacd491908d0d76a3642630cd84dc: serial: Extend structure comments with register offset (2015-01-21 10:36:36 +0100) ---------------------------------------------------------------- Michal Simek (9): ARM: zynq: Remove empty line ARM: zynq: ddrc: Setup half of memory only for ECC case ARM: zynq: List nand, qspi and jtag boot modes ARM: zynq: List qspi, smc and nand baseaddresses ARM: zynq: Show board information by default ARM: zynq: Use CMD_FS_GENERIC ARM: zynq: Group ethernet configuration options together serial: zynq: Use global baudrate instead of hardcoded one serial: Extend structure comments with register offset Siva Durga Prasad Paladugu (5): ARM: zynq: Enable the Neon instructions ARM: zynq: slcr: Dont modify the reserved bits ARM: zynq: provide config option to select emio ARM: zynq: Enable DFU functionality in zynq ARM: zynq: Add USB lthor download protocol support arch/arm/cpu/armv7/zynq/Makefile | 1 + arch/arm/cpu/armv7/zynq/cpu.c | 4 ---- arch/arm/cpu/armv7/zynq/ddrc.c | 2 ++ arch/arm/cpu/armv7/zynq/lowlevel_init.S | 26 ++++++++++++++++++++++++++ arch/arm/cpu/armv7/zynq/slcr.c | 2 +- arch/arm/cpu/armv7/zynq/spl.c | 9 +++++++++ arch/arm/include/asm/arch-zynq/hardware.h | 5 +++++ board/xilinx/zynq/board.c | 14 ++++++++++++-- drivers/serial/serial_zynq.c | 30 +++++++----------------------- include/configs/zynq-common.h | 77 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------- 10 files changed, 130 insertions(+), 40 deletions(-) create mode 100644 arch/arm/cpu/armv7/zynq/lowlevel_init.S -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform

3 10

[U-Boot] Please pull u-boot-marvell master
by Luka Perkov 27 Jan '15

27 Jan '15

Hi Albert, this series contains pending kirkwood patches that have been posted on the mailing list for some time now. The following changes since commit 37b608a52dcb13312a4f7ccea199cd6bac76d298: powerpc: remove icecube_5200, Lite5200, cpci5200, mecp5200, pf5200 (2015-01-23 16:56:09 -0500) are available in the git repository at: git://git.denx.de/u-boot-marvell.git master for you to fetch changes up to 361b3d8613f57e137a9048ef69e58e9bcaf51b78: marvell: kirkwood: guruplug refresh for newer kernel (2015-01-26 00:25:29 +0100) ---------------------------------------------------------------- Gerald Kerma (1): marvell: kirkwood: guruplug refresh for newer kernel Luka Perkov (9): cosmetic: kirkwood: style fixes in kwbimage.cfg files kirkwood: define empty CONFIG_MVGBE_PORTS by default ARM: kirkwood: fix cpu info for 6282 device id kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define kirkwood: dockstar: add CONFIG_SYS_GENERIC_BOARD define kirkwood: goflexhome: add CONFIG_SYS_GENERIC_BOARD define kirkwood: iconnect: add CONFIG_SYS_GENERIC_BOARD define kirkwood: pogo_e02: add CONFIG_SYS_GENERIC_BOARD define kirkwood: sheevaplug: add CONFIG_SYS_GENERIC_BOARD define arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 11 +++-- board/iomega/iconnect/kwbimage.cfg | 4 +- board/raidsonic/ib62x0/kwbimage.cfg | 22 ++++----- drivers/net/mvgbe.c | 4 ++ include/configs/dockstar.h | 2 + include/configs/goflexhome.h | 2 + include/configs/guruplug.h | 84 ++++++++++++++++++++++++++++------- include/configs/ib62x0.h | 2 + include/configs/iconnect.h | 2 + include/configs/pogo_e02.h | 2 + include/configs/sheevaplug.h | 2 + 11 files changed, 104 insertions(+), 33 deletions(-) Regards, Luka

2 1

[U-Boot] Please pull u-boot-fsl-qoriq master
by York Sun 27 Jan '15

27 Jan '15

Tom, The following changes since commit 37b608a52dcb13312a4f7ccea199cd6bac76d298: powerpc: remove icecube_5200, Lite5200, cpci5200, mecp5200, pf5200 (2015-01-23 16:56:09 -0500) are available in the git repository at: git://git.denx.de/u-boot-fsl-qoriq.git master for you to fetch changes up to 41ba57d0c7968506ddcc71604bd39131acf6ee23: fsl/ls1021qds: Add deep sleep support (2015-01-24 09:12:32 -0600) ---------------------------------------------------------------- Alison Wang (5): ls102xa: etsec: Select ge0_clk125 for eTSEC clock muxing as default arm: ls102xa: Update snoop settings for CCI-400 ls102xa: fdt: Disable QSPI and DSPI in NOR/NAND/SD boot arm: ls102xa: Add LPUART support for LS1021AQDS board arm: ls102xa: Add LPUART support for LS1021ATWR board Ruchika Gupta (2): arm: ls102xa: Add dummy gpio.h to enable CONFIG_OF_CONTROL crypto/fsl: Add fixup for crypto node Xiubo Li (1): ls102xa: dcu: Add platform support for DCU on LS1021AQDS board York Sun (1): arm/ls1021a: Add workaround for DDR erratum A008378 tang yuantian (2): ARM: HYP/non-sec: Make variable gic_dist_addr as a local one fsl/ls1021qds: Add deep sleep support arch/arm/cpu/armv7/ls102xa/fdt.c | 49 ++++++ arch/arm/cpu/armv7/virt-v7.c | 9 +- arch/arm/include/asm/arch-ls102xa/config.h | 5 + arch/arm/include/asm/arch-ls102xa/gpio.h | 15 ++ arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 4 + arch/powerpc/cpu/mpc8xxx/fdt.c | 170 ------------------- arch/powerpc/include/asm/config.h | 1 + board/freescale/ls1021aqds/MAINTAINERS | 1 + board/freescale/ls1021aqds/Makefile | 1 + board/freescale/ls1021aqds/dcu.c | 92 +++++++++++ board/freescale/ls1021aqds/ddr.c | 17 ++ board/freescale/ls1021aqds/ls1021aqds.c | 86 +++++++++- board/freescale/ls1021aqds/ls1021aqds_qixis.h | 2 + board/freescale/ls1021atwr/MAINTAINERS | 1 + board/freescale/ls1021atwr/ls1021atwr.c | 25 +-- configs/ls1021aqds_nor_lpuart_defconfig | 3 + configs/ls1021atwr_nor_lpuart_defconfig | 3 + drivers/crypto/fsl/Makefile | 1 + drivers/crypto/fsl/sec.c | 184 +++++++++++++++++++++ drivers/ddr/fsl/fsl_ddr_gen4.c | 8 + include/configs/ls1021aqds.h | 41 ++++- include/configs/ls1021atwr.h | 12 ++ include/fsl_ddr.h | 6 + 23 files changed, 545 insertions(+), 191 deletions(-) create mode 100644 arch/arm/include/asm/arch-ls102xa/gpio.h create mode 100644 board/freescale/ls1021aqds/dcu.c create mode 100644 configs/ls1021aqds_nor_lpuart_defconfig create mode 100644 configs/ls1021atwr_nor_lpuart_defconfig create mode 100644 drivers/crypto/fsl/sec.c Thanks. York

2 1