April 2014 - U-Boot

[U-Boot] [PATCH v7] socfpga: Adding Scan Manager driver
by Chin Liang See 03 Apr '14

03 Apr '14

Scan Manager driver will be called to configure the IOCSR scan chain. This configuration will setup the IO buffer settings Signed-off-by: Chin Liang See <clsee(a)altera.com> Cc: Dinh Nguyen <dinguyen(a)altera.com> Cc: Wolfgang Denk <wd(a)denx.de> CC: Pavel Machek <pavel(a)denx.de> Cc: Tom Rini <trini(a)ti.com> Cc: Albert Aribaud <albert.u.boot(a)aribaud.net> --- Changes for v7 - Enhance the function scan_chain_engine_is_idle Changes for v6 - Fixed various coding style issue Changes for v5 - Removal of additional blank line - Added comment for magic number Changes for v4 - avoid code duplication by add goto error - include underscore to variables name Changes for v3 - merge the handoff file and driver into single patch Changes for v2 - rebase with latest v2014.01-rc1 --- arch/arm/cpu/armv7/socfpga/Makefile | 2 +- arch/arm/cpu/armv7/socfpga/scan_manager.c | 209 +++++++ arch/arm/cpu/armv7/socfpga/spl.c | 4 + arch/arm/include/asm/arch-socfpga/scan_manager.h | 90 +++ .../include/asm/arch-socfpga/socfpga_base_addrs.h | 1 + board/altera/socfpga/iocsr_config.c | 657 ++++++++++++++++++++ board/altera/socfpga/iocsr_config.h | 17 + include/configs/socfpga_cyclone5.h | 1 + 8 files changed, 980 insertions(+), 1 deletion(-) create mode 100644 arch/arm/cpu/armv7/socfpga/scan_manager.c create mode 100644 arch/arm/include/asm/arch-socfpga/scan_manager.h create mode 100644 board/altera/socfpga/iocsr_config.c create mode 100644 board/altera/socfpga/iocsr_config.h diff --git a/arch/arm/cpu/armv7/socfpga/Makefile b/arch/arm/cpu/armv7/socfpga/Makefile index cbe1d40..eb33f2c 100644 --- a/arch/arm/cpu/armv7/socfpga/Makefile +++ b/arch/arm/cpu/armv7/socfpga/Makefile @@ -9,4 +9,4 @@ obj-y := lowlevel_init.o obj-y += misc.o timer.o reset_manager.o system_manager.o clock_manager.o -obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o +obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o scan_manager.o diff --git a/arch/arm/cpu/armv7/socfpga/scan_manager.c b/arch/arm/cpu/armv7/socfpga/scan_manager.c new file mode 100644 index 0000000..a820b1b --- /dev/null +++ b/arch/arm/cpu/armv7/socfpga/scan_manager.c @@ -0,0 +1,209 @@ +/* + * Copyright (C) 2013 Altera Corporation <www.altera.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/freeze_controller.h> +#include <asm/arch/scan_manager.h> + +DECLARE_GLOBAL_DATA_PTR; + +static const struct socfpga_scan_manager *scan_manager_base = + (void *)(SOCFPGA_SCANMGR_ADDRESS); +static const struct socfpga_freeze_controller *freeze_controller_base = + (void *)(SOCFPGA_SYSMGR_ADDRESS + SYSMGR_FRZCTRL_ADDRESS); + +/* + * Function to check IO scan chain engine status and wait if the engine is + * is active. Poll the IO scan chain engine till maximum iteration reached. + */ +static inline uint32_t scan_chain_engine_is_idle(uint32_t max_iter) +{ + uint32_t scanmgr_status; + + scanmgr_status = readl(&scan_manager_base->stat); + + /* Poll the engine until the scan engine is inactive */ + while (SCANMGR_STAT_ACTIVE_GET(scanmgr_status) || + (SCANMGR_STAT_WFIFOCNT_GET(scanmgr_status) > 0)) { + max_iter--; + if (max_iter > 0) + scanmgr_status = readl(&scan_manager_base->stat); + else + return 0; + } + return 1; +} + +/* Program HPS IO Scan Chain */ +uint32_t scan_mgr_io_scan_chain_prg( + uint32_t io_scan_chain_id, + uint32_t io_scan_chain_len_in_bits, + const uint32_t *iocsr_scan_chain) +{ + uint16_t tdi_tdo_header; + uint32_t io_program_iter; + uint32_t io_scan_chain_data_residual; + uint32_t residual; + uint32_t i; + uint32_t index = 0; + + /* + * De-assert reinit if the IO scan chain is intended for HIO. In + * this, its the chain 3. + */ + if (io_scan_chain_id == 3) + clrbits_le32(&freeze_controller_base->hioctrl, + SYSMGR_FRZCTRL_HIOCTRL_DLLRST_MASK); + + /* + * Check if the scan chain engine is inactive and the + * WFIFO is empty before enabling the IO scan chain + */ + if (!scan_chain_engine_is_idle(SCAN_MAX_DELAY)) + return 1; + + /* + * Enable IO Scan chain based on scan chain id + * Note: only one chain can be enabled at a time + */ + setbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id); + + /* + * Calculate number of iteration needed for full 128-bit (4 x32-bits) + * bits shifting. Each TDI_TDO packet can shift in maximum 128-bits + */ + io_program_iter = io_scan_chain_len_in_bits >> + IO_SCAN_CHAIN_128BIT_SHIFT; + io_scan_chain_data_residual = io_scan_chain_len_in_bits & + IO_SCAN_CHAIN_128BIT_MASK; + + /* Construct TDI_TDO packet for 128-bit IO scan chain (2 bytes) */ + tdi_tdo_header = TDI_TDO_HEADER_FIRST_BYTE | + (TDI_TDO_MAX_PAYLOAD << TDI_TDO_HEADER_SECOND_BYTE_SHIFT); + + /* Program IO scan chain in 128-bit iteration */ + for (i = 0; i < io_program_iter; i++) { + /* write TDI_TDO packet header to scan manager */ + writel(tdi_tdo_header, &scan_manager_base->fifo_double_byte); + + /* calculate array index. Multiply by 4 as write 4 x 32bits */ + index = i * 4; + + /* write 4 successive 32-bit IO scan chain data into WFIFO */ + writel(iocsr_scan_chain[index], + &scan_manager_base->fifo_quad_byte); + writel(iocsr_scan_chain[index + 1], + &scan_manager_base->fifo_quad_byte); + writel(iocsr_scan_chain[index + 2], + &scan_manager_base->fifo_quad_byte); + writel(iocsr_scan_chain[index + 3], + &scan_manager_base->fifo_quad_byte); + + /* + * Check if the scan chain engine has completed the + * IO scan chain data shifting + */ + if (!scan_chain_engine_is_idle(SCAN_MAX_DELAY)) + goto error; + } + + /* Calculate array index for final TDI_TDO packet */ + index = io_program_iter * 4; + + /* Final TDI_TDO packet if any */ + if (io_scan_chain_data_residual) { + /* + * Calculate number of quad bytes FIFO write + * needed for the final TDI_TDO packet + */ + io_program_iter = io_scan_chain_data_residual >> + IO_SCAN_CHAIN_32BIT_SHIFT; + + /* + * Construct TDI_TDO packet for remaining IO + * scan chain (2 bytes) + */ + tdi_tdo_header = TDI_TDO_HEADER_FIRST_BYTE | + ((io_scan_chain_data_residual - 1) << + TDI_TDO_HEADER_SECOND_BYTE_SHIFT); + + /* + * Program the last part of IO scan chain write TDI_TDO packet + * header (2 bytes) to scan manager + */ + writel(tdi_tdo_header, &scan_manager_base->fifo_double_byte); + + for (i = 0; i < io_program_iter; i++) { + /* + * write remaining scan chain data into scan + * manager WFIFO with 4 bytes write + */ + writel(iocsr_scan_chain[index + i], + &scan_manager_base->fifo_quad_byte); + } + + index += io_program_iter; + residual = io_scan_chain_data_residual & + IO_SCAN_CHAIN_32BIT_MASK; + + if (IO_SCAN_CHAIN_PAYLOAD_24BIT < residual) { + /* + * write the last 4B scan chain data + * into scan manager WFIFO + */ + writel(iocsr_scan_chain[index], + &scan_manager_base->fifo_quad_byte); + } else { + /* + * write the remaining 1 - 3 bytes scan chain + * data into scan manager WFIFO byte by byte + * to prevent JTAG engine shifting unused data + * from the FIFO and mistaken the data as a + * valid command (even though unused bits are + * set to 0, but just to prevent hardware + * glitch) + */ + for (i = 0; i < residual; i += 8) { + writel(((iocsr_scan_chain[index] >> i) + & IO_SCAN_CHAIN_BYTE_MASK), + &scan_manager_base->fifo_single_byte); + } + } + + /* + * Check if the scan chain engine has completed the + * IO scan chain data shifting + */ + if (!scan_chain_engine_is_idle(SCAN_MAX_DELAY)) + goto error; + } + + /* Disable IO Scan chain when configuration done*/ + clrbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id); + return 0; + +error: + /* Disable IO Scan chain when error detected */ + clrbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id); + return 1; +} + +int scan_mgr_configure_iocsr(void) +{ + int status = 0; + + /* configure the IOCSR through scan chain */ + status |= scan_mgr_io_scan_chain_prg(0, + CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH, iocsr_scan_chain0_table); + status |= scan_mgr_io_scan_chain_prg(1, + CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH, iocsr_scan_chain1_table); + status |= scan_mgr_io_scan_chain_prg(2, + CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH, iocsr_scan_chain2_table); + status |= scan_mgr_io_scan_chain_prg(3, + CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH, iocsr_scan_chain3_table); + return status; +} diff --git a/arch/arm/cpu/armv7/socfpga/spl.c b/arch/arm/cpu/armv7/socfpga/spl.c index 2ae88bb..4bed19d 100644 --- a/arch/arm/cpu/armv7/socfpga/spl.c +++ b/arch/arm/cpu/armv7/socfpga/spl.c @@ -121,6 +121,10 @@ void spl_board_init(void) /* reconfigure the PLLs */ cm_basic_init(&cm_default_cfg); + /* configure the IOCSR / IO buffer settings */ + if (scan_mgr_configure_iocsr()) + hang(); + /* configure the pin muxing through system manager */ sysmgr_pinmux_init(); #endif /* CONFIG_SOCFPGA_VIRTUAL_TARGET */ diff --git a/arch/arm/include/asm/arch-socfpga/scan_manager.h b/arch/arm/include/asm/arch-socfpga/scan_manager.h new file mode 100644 index 0000000..f9be621 --- /dev/null +++ b/arch/arm/include/asm/arch-socfpga/scan_manager.h @@ -0,0 +1,90 @@ +/* + * Copyright (C) 2013 Altera Corporation <www.altera.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SCAN_MANAGER_H_ +#define _SCAN_MANAGER_H_ + +struct socfpga_scan_manager { + u32 stat; + u32 en; + u32 padding[2]; + u32 fifo_single_byte; + u32 fifo_double_byte; + u32 fifo_quad_byte; +}; + +/* + * Shift count to get number of IO scan chain data in granularity + * of 128-bit ( N / 128 ) + */ +#define IO_SCAN_CHAIN_128BIT_SHIFT 7 + +/* + * Mask to get residual IO scan chain data in + * granularity of 128-bit ( N mod 128 ) + */ +#define IO_SCAN_CHAIN_128BIT_MASK 0x7F + +/* + * Shift count to get number of IO scan chain + * data in granularity of 32-bit ( N / 32 ) + */ +#define IO_SCAN_CHAIN_32BIT_SHIFT 5 + +/* + * Mask to get residual IO scan chain data in + * granularity of 32-bit ( N mod 32 ) + */ +#define IO_SCAN_CHAIN_32BIT_MASK 0x1F + +/* Byte mask */ +#define IO_SCAN_CHAIN_BYTE_MASK 0xFF + +/* 24-bits (3 bytes) IO scan chain payload definition */ +#define IO_SCAN_CHAIN_PAYLOAD_24BIT 24 + +/* + * Maximum length of TDI_TDO packet payload is 128 bits, + * represented by (length - 1) in TDI_TDO header + */ +#define TDI_TDO_MAX_PAYLOAD 127 + +/* TDI_TDO packet header for IO scan chain program */ +#define TDI_TDO_HEADER_FIRST_BYTE 0x80 + +/* Position of second command byte for TDI_TDO packet */ +#define TDI_TDO_HEADER_SECOND_BYTE_SHIFT 8 + +/* + * Maximum polling loop to wait for IO scan chain engine + * becomes idle to prevent infinite loop + */ +#define SCAN_MAX_DELAY 100 + +#define SCANMGR_STAT_ACTIVE_GET(x) (((x) & 0x80000000) >> 31) +#define SCANMGR_STAT_WFIFOCNT_GET(x) (((x) & 0x70000000) >> 28) + +/* + * Program HPS IO Scan Chain + * io_scan_chain_id - IO scan chain ID + * io_scan_chain_len_in_bits - IO scan chain length in bits + * iocsr_scan_chain - IO scan chain table + */ +uint32_t scan_mgr_io_scan_chain_prg( + uint32_t io_scan_chain_id, + uint32_t io_scan_chain_len_in_bits, + const uint32_t *iocsr_scan_chain); + +extern const uint32_t iocsr_scan_chain0_table[ + ((CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH / 32) + 1)]; +extern const uint32_t iocsr_scan_chain1_table[ + ((CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH / 32) + 1)]; +extern const uint32_t iocsr_scan_chain2_table[ + ((CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH / 32) + 1)]; +extern const uint32_t iocsr_scan_chain3_table[ + ((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH / 32) + 1)]; + +#endif /* _SCAN_MANAGER_H_ */ diff --git a/arch/arm/include/asm/arch-socfpga/socfpga_base_addrs.h b/arch/arm/include/asm/arch-socfpga/socfpga_base_addrs.h index f564046..20f12e0 100644 --- a/arch/arm/include/asm/arch-socfpga/socfpga_base_addrs.h +++ b/arch/arm/include/asm/arch-socfpga/socfpga_base_addrs.h @@ -14,5 +14,6 @@ #define SOCFPGA_CLKMGR_ADDRESS 0xffd04000 #define SOCFPGA_RSTMGR_ADDRESS 0xffd05000 #define SOCFPGA_SYSMGR_ADDRESS 0xffd08000 +#define SOCFPGA_SCANMGR_ADDRESS 0xfff02000 #endif /* _SOCFPGA_BASE_ADDRS_H_ */ diff --git a/board/altera/socfpga/iocsr_config.c b/board/altera/socfpga/iocsr_config.c new file mode 100644 index 0000000..b4b5ff8 --- /dev/null +++ b/board/altera/socfpga/iocsr_config.c @@ -0,0 +1,657 @@ +/* + * Copyright Altera Corporation (C) 2012-2014. All rights reserved + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/* This file is generated by Preloader Generator */ + +#include <iocsr_config.h> + +const unsigned long iocsr_scan_chain0_table[(( + CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH / 32) + 1)] = { + 0x00000000, + 0x00000000, + 0x0FF00000, + 0xC0000000, + 0x0000003F, + 0x00008000, + 0x00020080, + 0x08020000, + 0x08000000, + 0x00018020, + 0x00000000, + 0x00004000, + 0x00010040, + 0x04010000, + 0x04000000, + 0x00000010, + 0x00004010, + 0x00002000, + 0x00020000, + 0x02008000, + 0x02000000, + 0x00000008, + 0x00002008, + 0x00001000, +}; + +const unsigned long iocsr_scan_chain1_table[(( + CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH / 32) + 1)] = { + 0x000C0300, + 0x10040000, + 0x100000C0, + 0x00000040, + 0x00010040, + 0x00008000, + 0x00080000, + 0x18060000, + 0x18000000, + 0x00000060, + 0x00018060, + 0x00004000, + 0x00010040, + 0x10000000, + 0x04000000, + 0x00000010, + 0x00004010, + 0x00002000, + 0x06008020, + 0x02008000, + 0x01FE0000, + 0xF8000000, + 0x00000007, + 0x00001000, + 0x00004010, + 0x01004000, + 0x01000000, + 0x00003004, + 0x00001004, + 0x00000800, + 0x00000000, + 0x00000000, + 0x00800000, + 0x00000002, + 0x00002000, + 0x00000400, + 0x00000000, + 0x00401000, + 0x00000003, + 0x00000000, + 0x00000000, + 0x00000200, + 0x00600802, + 0x00000000, + 0x80200000, + 0x80000600, + 0x00000200, + 0x00000100, + 0x00300401, + 0xC0100400, + 0x40100000, + 0x40000300, + 0x000C0100, + 0x00000080, +}; + +const unsigned long iocsr_scan_chain2_table[(( + CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH / 32) + 1)] = { + 0x80040100, + 0x00000000, + 0x0FF00000, + 0x00000000, + 0x0C010040, + 0x00008000, + 0x18020080, + 0x00000000, + 0x08000000, + 0x00040020, + 0x06018060, + 0x00004000, + 0x0C010040, + 0x04010000, + 0x00000030, + 0x00000000, + 0x03004010, + 0x00002000, + 0x06008020, + 0x02008000, + 0x02000018, + 0x00006008, + 0x01802008, + 0x00001000, + 0x03004010, + 0x01004000, + 0x0100000C, + 0x00003004, + 0x00C01004, + 0x00000800, +}; + +const unsigned long iocsr_scan_chain3_table[(( + CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH / 32) + 1)] = { + 0x2C420D80, + 0x082000FF, + 0x0A804001, + 0x07900000, + 0x08020000, + 0x00100000, + 0x0A800000, + 0x07900000, + 0x08020000, + 0x00100000, + 0xC8800000, + 0x00003001, + 0x00C00722, + 0x00000000, + 0x00000021, + 0x82000004, + 0x05400000, + 0x03C80000, + 0x04010000, + 0x00080000, + 0x05400000, + 0x03C80000, + 0x05400000, + 0x03C80000, + 0xE4400000, + 0x00001800, + 0x00600391, + 0x800E4400, + 0x00000001, + 0x40000002, + 0x02A00000, + 0x01E40000, + 0x02A00000, + 0x01E40000, + 0x02A00000, + 0x01E40000, + 0x02A00000, + 0x01E40000, + 0x72200000, + 0x80000C00, + 0x003001C8, + 0xC0072200, + 0x1C880000, + 0x20000300, + 0x00040000, + 0x50670000, + 0x00000070, + 0x24590000, + 0x00001000, + 0xA0000034, + 0x0D000001, + 0x906808A2, + 0xA2834024, + 0x05141A00, + 0x808A20D0, + 0x34024906, + 0x01A00A28, + 0xA20D0000, + 0x24906808, + 0x00A28340, + 0xD000001A, + 0x06808A20, + 0x10040000, + 0x00200000, + 0x10040000, + 0x00200000, + 0x15000000, + 0x0F200000, + 0x15000000, + 0x0F200000, + 0x01FE0000, + 0x00000000, + 0x01800E44, + 0x00391000, + 0x007F8006, + 0x00000000, + 0x0A800001, + 0x07900000, + 0x0A800000, + 0x07900000, + 0x0A800000, + 0x07900000, + 0x08020000, + 0x00100000, + 0xC8800000, + 0x00003001, + 0x00C00722, + 0x00000FF0, + 0x72200000, + 0x80000C00, + 0x05400000, + 0x02480000, + 0x04000000, + 0x00080000, + 0x05400000, + 0x03C80000, + 0x05400000, + 0x03C80000, + 0x6A1C0000, + 0x00001800, + 0x00600391, + 0x800E4400, + 0x1A870001, + 0x40000600, + 0x02A00040, + 0x01E40000, + 0x02A00000, + 0x01E40000, + 0x02A00000, + 0x01E40000, + 0x02A00000, + 0x01E40000, + 0x72200000, + 0x80000C00, + 0x003001C8, + 0xC0072200, + 0x1C880000, + 0x20000300, + 0x00040000, + 0x50670000, + 0x00000070, + 0x24590000, + 0x00001000, + 0xA0000034, + 0x0D000001, + 0x906808A2, + 0xA2834024, + 0x05141A00, + 0x808A20D0, + 0x34024906, + 0x01A00040, + 0xA20D0002, + 0x24906808, + 0x00A28340, + 0xD005141A, + 0x06808A20, + 0x10040000, + 0x00200000, + 0x10040000, + 0x00200000, + 0x15000000, + 0x0F200000, + 0x15000000, + 0x0F200000, + 0x01FE0000, + 0x00000000, + 0x01800E44, + 0x00391000, + 0x007F8006, + 0x00000000, + 0x99300001, + 0x34343400, + 0xAA0D4000, + 0x01C3A810, + 0xAA0D4000, + 0x01C3A808, + 0xAA0D4000, + 0x01C3A810, + 0x00040100, + 0x00000800, + 0x00000000, + 0x00001208, + 0x00482000, + 0x000001C1, + 0x00000000, + 0x00410482, + 0x0006A000, + 0x0001B400, + 0x00020000, + 0x00000400, + 0x0002A000, + 0x0001E400, + 0x5506A000, + 0x00E1D404, + 0x00000000, + 0xC880090C, + 0x00003001, + 0x90400000, + 0x00000000, + 0x2020C243, + 0x2A835000, + 0x0070EA04, + 0x2A835000, + 0x0070EA02, + 0x2A835000, + 0x0070EA04, + 0x00010040, + 0x00000200, + 0x00000000, + 0x00000482, + 0x00120800, + 0x00002000, + 0x80000000, + 0x00104120, + 0x00000200, + 0xAC255F80, + 0xF1C71C71, + 0x14F3690D, + 0x1A041414, + 0x00D00000, + 0x14864000, + 0x59647A05, + 0xBA28A3D8, + 0xF511451E, + 0x0341D348, + 0x821A0000, + 0x0000D000, + 0x04510680, + 0xD859647A, + 0x1EBA28A3, + 0x48F51145, + 0x000341D3, + 0x00080200, + 0x00001000, + 0x00080200, + 0x00001000, + 0x000A8000, + 0x00075000, + 0x541A8000, + 0x03875011, + 0x10000000, + 0x00000000, + 0x0080C000, + 0x41000000, + 0x00003FC2, + 0x00820000, + 0xAA0D4000, + 0x01C3A810, + 0xAA0D4000, + 0x01C3A808, + 0xAA0D4000, + 0x01C3A810, + 0x00040100, + 0x00000800, + 0x00000000, + 0x00001208, + 0x00482000, + 0x00008000, + 0x00000000, + 0x00410482, + 0x0006A000, + 0x0001B400, + 0x00020000, + 0x00000400, + 0x00020080, + 0x00000400, + 0x5506A000, + 0x00E1D404, + 0x00000000, + 0x0000090C, + 0x00000010, + 0x90400000, + 0x00000000, + 0x2020C243, + 0x2A835000, + 0x0070EA04, + 0x2A835000, + 0x0070EA02, + 0x2A835000, + 0x0070EA04, + 0x00015000, + 0x0000F200, + 0x00000000, + 0x00000482, + 0x00120800, + 0x00600391, + 0x80000000, + 0x00104120, + 0x00000200, + 0xAC255F80, + 0xF1C71C71, + 0x14F3690D, + 0x1A041414, + 0x00D00000, + 0x14864000, + 0x59647A05, + 0xBA28A3D8, + 0xF511451E, + 0x8341D348, + 0x821A0124, + 0x0000D000, + 0x00000680, + 0xD859647A, + 0x1EBA28A3, + 0x48F51145, + 0x000341D3, + 0x00080200, + 0x00001000, + 0x00080200, + 0x00001000, + 0x000A8000, + 0x00075000, + 0x541A8000, + 0x03875011, + 0x10000000, + 0x00000000, + 0x0080C000, + 0x41000000, + 0x04000002, + 0x00820000, + 0xAA0D4000, + 0x01C3A810, + 0xAA0D4000, + 0x01C3A808, + 0xAA0D4000, + 0x01C3A810, + 0x00040100, + 0x00000800, + 0x00000000, + 0x00001208, + 0x00482000, + 0x00008000, + 0x00000000, + 0x00410482, + 0x0006A000, + 0x0001B400, + 0x00020000, + 0x00000400, + 0x0002A000, + 0x0001E400, + 0x5506A000, + 0x00E1D404, + 0x00000000, + 0xC880090C, + 0x00003001, + 0x90400000, + 0x00000000, + 0x2020C243, + 0x2A835000, + 0x0070EA04, + 0x2A835000, + 0x0070EA02, + 0x2A835000, + 0x0070EA04, + 0x00010040, + 0x00000200, + 0x00000000, + 0x00000482, + 0x00120800, + 0x00002000, + 0x80000000, + 0x00104120, + 0x00000200, + 0xAC255F80, + 0xF1C71C71, + 0x14F3690D, + 0x1A041414, + 0x00D00000, + 0x14864000, + 0x59647A05, + 0xBA28A3D8, + 0xF511451E, + 0x0341D348, + 0x821A0000, + 0x0000D000, + 0x00000680, + 0xD859647A, + 0x1EBA28A3, + 0x48F51145, + 0x000341D3, + 0x00080200, + 0x00001000, + 0x00080200, + 0x00001000, + 0x000A8000, + 0x00075000, + 0x541A8000, + 0x03875011, + 0x10000000, + 0x00000000, + 0x0080C000, + 0x41000000, + 0x04000002, + 0x00820000, + 0xAA0D4000, + 0x01C3A810, + 0xAA0D4000, + 0x01C3A808, + 0xAA0D4000, + 0x01C3A810, + 0x00040100, + 0x00000800, + 0x00000000, + 0x00001208, + 0x00482000, + 0x00008000, + 0x00000000, + 0x00410482, + 0x0006A000, + 0x0001B400, + 0x00020000, + 0x00000400, + 0x00020080, + 0x00000400, + 0x5506A000, + 0x00E1D404, + 0x00000000, + 0x0000090C, + 0x00000010, + 0x90400000, + 0x00000000, + 0x2020C243, + 0x2A835000, + 0x0070EA04, + 0x2A835000, + 0x0070EA02, + 0x2A835000, + 0x0070EA04, + 0x00010040, + 0x00000200, + 0x00000000, + 0x00000482, + 0x40120800, + 0x00000070, + 0x80000000, + 0x00104120, + 0x00000200, + 0xAC255F80, + 0xF1C71C71, + 0x14F1690D, + 0x1A041414, + 0x00D00000, + 0x14864000, + 0x59647A05, + 0xBA28A3D8, + 0xF511451E, + 0x0341D348, + 0x821A0000, + 0x0000D000, + 0x00000680, + 0xD859647A, + 0x1EBA28A3, + 0x48F51145, + 0x000341D3, + 0x00080200, + 0x00001000, + 0x00080200, + 0x00001000, + 0x000A8000, + 0x00075000, + 0x541A8000, + 0x03875011, + 0x10000000, + 0x00000000, + 0x0080C000, + 0x41000000, + 0x04000002, + 0x00820000, + 0x00489800, + 0x001A1A1A, + 0x085506A0, + 0x0000E1D4, + 0x045506A0, + 0x0000E1D4, + 0x085506A0, + 0x8000E1D4, + 0x00000200, + 0x00000004, + 0x04000000, + 0x00000009, + 0x00002410, + 0x00000040, + 0x41000000, + 0x00002082, + 0x00000350, + 0x000000DA, + 0x00000100, + 0x40000002, + 0x00000100, + 0x00000002, + 0x022A8350, + 0x000070EA, + 0x86000000, + 0x08000004, + 0x00000000, + 0x00482000, + 0x21800000, + 0x00101061, + 0x021541A8, + 0x00003875, + 0x011541A8, + 0x00003875, + 0x021541A8, + 0x20003875, + 0x00000080, + 0x00000001, + 0x41000000, + 0x00000002, + 0x00FF0904, + 0x00000000, + 0x90400000, + 0x00000820, + 0xC0000001, + 0x38D612AF, + 0x86F8E38E, + 0x0A0A78B4, + 0x000D020A, + 0x00006800, + 0x028A4320, + 0xEC2CB23D, + 0x8F5D1451, + 0xA47A88A2, + 0x0001A0E9, + 0x00410D00, + 0x40000068, + 0x3D000003, + 0x51EC2CB2, + 0xA28F5D14, + 0xE9A47A88, + 0x000001A0, + 0x00000401, + 0x00000008, + 0x00000401, + 0x00000008, + 0x00000540, + 0x000003A8, + 0x08AA0D40, + 0x8001C3A8, + 0x0000007F, + 0x00000000, + 0x00004060, + 0xE1208000, + 0x0000001F, + 0x00004100, +}; diff --git a/board/altera/socfpga/iocsr_config.h b/board/altera/socfpga/iocsr_config.h new file mode 100644 index 0000000..490f109 --- /dev/null +++ b/board/altera/socfpga/iocsr_config.h @@ -0,0 +1,17 @@ +/* + * Copyright Altera Corporation (C) 2012-2014. All rights reserved + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/* This file is generated by Preloader Generator */ + +#ifndef _PRELOADER_IOCSR_CONFIG_H_ +#define _PRELOADER_IOCSR_CONFIG_H_ + +#define CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH (764) +#define CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH (1719) +#define CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH (955) +#define CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH (16766) + +#endif /*_PRELOADER_IOCSR_CONFIG_H_*/ diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h index 0254249..fc921ee 100644 --- a/include/configs/socfpga_cyclone5.h +++ b/include/configs/socfpga_cyclone5.h @@ -8,6 +8,7 @@ #include <asm/arch/socfpga_base_addrs.h> #include "../../board/altera/socfpga/pinmux_config.h" +#include "../../board/altera/socfpga/iocsr_config.h" #include "../../board/altera/socfpga/pll_config.h" /* -- 1.7.9.5

4 11

[U-Boot] Xilinx Zed Board resets with Master
by Tim Sander 03 Apr '14

03 Apr '14

Hi As i have seen that the Xilinx support has entered master i just tried to boot it on a Xilinx Zynx Zedboard Rev. D. The build works with the xilinx git tree so i am pretty confident that its not some issues with bootgen or the embedded fpga image. The board loads the fpga which can be seen by the blue "done" led of the ZedBoard. But then the LED turns off and about after a second or so it just lights up shortly again to turn off again. So it seems as if the board is somehow caught in a reboot loop. Any ideas what might be wrong? I am building with: export PATH=~/xilinx/SDK/2013.3/gnu/arm/lin/bin:$PATH export CROSS_COMPILE=arm-xilinx-linux-gnueabi- make clean make distclean make zynq_zed_config make The BOOT.BIN is build xilinx/SDK/2013.3/bin/lin64/bootgen -image u-boot.bif -w on -o BOOT.BIN And u-boot.bif looks like that: the_ROM_image: { [bootloader]zynq_fsbl_0.elf system.bit u-boot.elf } Best regards Tim

4 13

[U-Boot] [PATCH] usb: ehci: rmobile: Add support ehci host driver of rmobile SoCs
by Nobuhiro Iwamatsu 03 Apr '14

03 Apr '14

The rmobile SoC has usb host controller. This supports USB controllers listed in the R8A7790, R8A7791 and R8A7740. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj(a)renesas.com> Reviewed-by: Marek Vasut <marex(a)denx.de> --- v2: - Remove PHYS_OFFSET, use instead of CONFIG_SYS_SDRAM_BASE. - Move usb_base_address to ehci-rmobile.c. We do not need to be defined in the include file. arch/arm/include/asm/arch-rmobile/ehci-rmobile.h | 147 +++++++++++++++++++++++ drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-rmobile.c | 130 ++++++++++++++++++++ 3 files changed, 278 insertions(+) create mode 100644 arch/arm/include/asm/arch-rmobile/ehci-rmobile.h create mode 100644 drivers/usb/host/ehci-rmobile.c diff --git a/arch/arm/include/asm/arch-rmobile/ehci-rmobile.h b/arch/arm/include/asm/arch-rmobile/ehci-rmobile.h new file mode 100644 index 0000000..463654e --- /dev/null +++ b/arch/arm/include/asm/arch-rmobile/ehci-rmobile.h @@ -0,0 +1,147 @@ +/* + * Copyright (C) 2013,2014 Renesas Electronics Corporation + * Copyright (C) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj(a)renesas.com> + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __EHCI_RMOBILE_H__ +#define __EHCI_RMOBILE_H__ + +/* Register offset */ +#define OHCI_OFFSET 0x00 +#define OHCI_SIZE 0x1000 +#define EHCI_OFFSET 0x1000 +#define EHCI_SIZE 0x1000 + +#define EHCI_USBCMD (EHCI_OFFSET + 0x0020) + +/* USBCTR */ +#define DIRPD (1 << 8) +#define PLL_RST (1 << 2) +#define PCICLK_MASK (1 << 1) +#define USBH_RST (1 << 0) + +/* CMND_STS */ +#define SERREN (1 << 8) +#define PERREN (1 << 6) +#define MASTEREN (1 << 2) +#define MEMEN (1 << 1) + +/* PCIAHB_WIN1_CTR and PCIAHB_WIN2_CTR */ +#define PCIAHB_WIN_PREFETCH ((1 << 1)|(1 << 0)) + +/* AHBPCI_WIN1_CTR */ +#define PCIWIN1_PCICMD ((1 << 3)|(1 << 1)) +#define AHB_CFG_AHBPCI 0x40000000 +#define AHB_CFG_HOST 0x80000000 + +/* AHBPCI_WIN2_CTR */ +#define PCIWIN2_PCICMD ((1 << 2)|(1 << 1)) + +/* PCI_INT_ENABLE */ +#define USBH_PMEEN (1 << 19) +#define USBH_INTBEN (1 << 17) +#define USBH_INTAEN (1 << 16) + +/* AHB_BUS_CTR */ +#define SMODE_READY_CTR (1 << 17) +#define SMODE_READ_BURST (1 << 16) +#define MMODE_HBUSREQ (1 << 7) +#define MMODE_BOUNDARY ((1 << 6)|(1 << 5)) +#define MMODE_BURST_WIDTH ((1 << 4)|(1 << 3)) +#define MMODE_SINGLE_MODE ((1 << 4)|(1 << 3)) +#define MMODE_WR_INCR (1 << 2) +#define MMODE_BYTE_BURST (1 << 1) +#define MMODE_HTRANS (1 << 0) + +/* PCI_ARBITER_CTR */ +#define PCIBUS_PARK_TIMER 0x00FF0000 +#define PCIBUS_PARK_TIMER_SET 0x00070000 +#define PCIBP_MODE (1 << 12) +#define PCIREQ7 (1 << 7) +#define PCIREQ6 (1 << 6) +#define PCIREQ5 (1 << 5) +#define PCIREQ4 (1 << 4) +#define PCIREQ3 (1 << 3) +#define PCIREQ2 (1 << 2) +#define PCIREQ1 (1 << 1) +#define PCIREQ0 (1 << 0) + +#define SMSTPCR7 0xE615014C +#define SMSTPCR703 (1 << 3) + +/* Init AHB master and slave functions of the host logic */ +#define AHB_BUS_CTR_INIT \ + (SMODE_READY_CTR | MMODE_HBUSREQ | MMODE_WR_INCR | \ + MMODE_BYTE_BURST | MMODE_HTRANS) + +#define USBCTR_WIN_SIZE_1GB 0x800 + +/* PCI Configuration Registers */ +#define PCI_CONF_OHCI_OFFSET 0x10000 +#define PCI_CONF_EHCI_OFFSET 0x10100 +struct ahb_pciconf { + u32 vid_did; + u32 cmnd_sts; + u32 rev; + u32 cache_line; + u32 basead; +}; + +/* PCI Configuration Registers for AHB-PCI Bridge Registers */ +#define PCI_CONF_AHBPCI_OFFSET 0x10000 +struct ahbconf_pci_bridge { + u32 vid_did; /* 0x00 */ + u32 cmnd_sts; + u32 revid_cc; + u32 cls_lt_ht_bist; + u32 basead; /* 0x10 */ + u32 win1_basead; + u32 win2_basead; + u32 dummy0[5]; + u32 ssvdi_ssid; /* 0x2C */ + u32 dummy1[4]; + u32 intr_line_pin; +}; + +/* AHB-PCI Bridge PCI Communication Registers */ +#define AHBPCI_OFFSET 0x10800 +struct ahbcom_pci_bridge { + u32 pciahb_win1_ctr; /* 0x00 */ + u32 pciahb_win2_ctr; + u32 pciahb_dct_ctr; + u32 dummy0; + u32 ahbpci_win1_ctr; /* 0x10 */ + u32 ahbpci_win2_ctr; + u32 dummy1; + u32 ahbpci_dct_ctr; + u32 pci_int_enable; /* 0x20 */ + u32 pci_int_status; + u32 dummy2[2]; + u32 ahb_bus_ctr; /* 0x30 */ + u32 usbctr; + u32 dummy3[2]; + u32 pci_arbiter_ctr; /* 0x40 */ + u32 dummy4; + u32 pci_unit_rev; /* 0x48 */ +}; + +struct rmobile_ehci_reg { + u32 hciversion; /* hciversion/caplength */ + u32 hcsparams; /* hcsparams */ + u32 hccparams; /* hccparams */ + u32 hcsp_portroute; /* hcsp_portroute */ + u32 usbcmd; /* usbcmd */ + u32 usbsts; /* usbsts */ + u32 usbintr; /* usbintr */ + u32 frindex; /* frindex */ + u32 ctrldssegment; /* ctrldssegment */ + u32 periodiclistbase; /* periodiclistbase */ + u32 asynclistaddr; /* asynclistaddr */ + u32 dummy[9]; + u32 configflag; /* configflag */ + u32 portsc; /* portsc */ +}; + +#endif /* __EHCI_RMOBILE_H__ */ diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 578b097..b301e28 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o +obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o # xhci obj-$(CONFIG_USB_XHCI) += xhci.o xhci-mem.o xhci-ring.o diff --git a/drivers/usb/host/ehci-rmobile.c b/drivers/usb/host/ehci-rmobile.c new file mode 100644 index 0000000..049e4c4 --- /dev/null +++ b/drivers/usb/host/ehci-rmobile.c @@ -0,0 +1,130 @@ +/* + * EHCI HCD (Host Controller Driver) for USB. + * + * Copyright (C) 2013,2014 Renesas Electronics Corporation + * Copyright (C) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj(a)renesas.com> + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/ehci-rmobile.h> +#include "ehci.h" + +#if defined(CONFIG_R8A7740) +static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { + 0xC6700000 +}; +#elif defined(CONFIG_R8A7790) +static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { + 0xEE080000, /* USB0 (EHCI) */ + 0xEE0A0000, /* USB1 */ + 0xEE0C0000, /* USB2 */ + 0xEE000000 /* USB3 (USB3.0 Host)*/ +}; +#elif defined(CONFIG_R8A7791) +static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { + 0xEE080000, /* USB0 (EHCI) */ + 0xEE0C0000, /* USB1 */ + 0xEE000000 /* USB3 (USB3.0 Host)*/ +}; +#else +#error rmobile EHCI USB driver not supported on this platform +#endif + +int ehci_hcd_stop(int index) +{ + int i; + u32 base; + struct ahbcom_pci_bridge *ahbcom_pci; + + base = usb_base_address[index]; + ahbcom_pci = (struct ahbcom_pci_bridge *)(base + AHBPCI_OFFSET); + writel(0, &ahbcom_pci->ahb_bus_ctr); + + /* reset ehci */ + setbits_le32(base + EHCI_USBCMD, CMD_RESET); + for (i = 100; i > 0; i--) { + if (!(readl(base + EHCI_USBCMD) & CMD_RESET)) + break; + udelay(100); + } + + if (!i) + printf("error : ehci(%d) reset failed.\n", index); + + if (index == (CONFIG_USB_MAX_CONTROLLER_COUNT - 1)) + setbits_le32(SMSTPCR7, SMSTPCR703); + + return 0; +} + +int ehci_hcd_init(int index, enum usb_init_type init, + struct ehci_hccr **hccr, struct ehci_hcor **hcor) +{ + u32 base; + u32 phys_base; + struct rmobile_ehci_reg *rehci; + struct ahbcom_pci_bridge *ahbcom_pci; + struct ahbconf_pci_bridge *ahbconf_pci; + struct ahb_pciconf *ahb_pciconf_ohci; + struct ahb_pciconf *ahb_pciconf_ehci; + uint32_t cap_base; + + base = usb_base_address[index]; + phys_base = base; + if (index == 0) + clrbits_le32(SMSTPCR7, SMSTPCR703); + + rehci = (struct rmobile_ehci_reg *)(base + EHCI_OFFSET); + ahbcom_pci = (struct ahbcom_pci_bridge *)(base + AHBPCI_OFFSET); + ahbconf_pci = + (struct ahbconf_pci_bridge *)(base + PCI_CONF_AHBPCI_OFFSET); + ahb_pciconf_ohci = (struct ahb_pciconf *)(base + PCI_CONF_OHCI_OFFSET); + ahb_pciconf_ehci = (struct ahb_pciconf *)(base + PCI_CONF_EHCI_OFFSET); + + /* Clock & Reset & Direct Power Down */ + clrsetbits_le32(&ahbcom_pci->usbctr, + (DIRPD | PCICLK_MASK | USBH_RST), USBCTR_WIN_SIZE_1GB); + clrbits_le32(&ahbcom_pci->usbctr, PLL_RST); + + /* AHB-PCI Bridge Communication Registers */ + writel(AHB_BUS_CTR_INIT, &ahbcom_pci->ahb_bus_ctr); + writel((CONFIG_SYS_SDRAM_BASE & 0xf0000000) | PCIAHB_WIN_PREFETCH, + &ahbcom_pci->pciahb_win1_ctr); + writel(0xf0000000 | PCIAHB_WIN_PREFETCH, + &ahbcom_pci->pciahb_win2_ctr); + writel(phys_base | PCIWIN2_PCICMD, &ahbcom_pci->ahbpci_win2_ctr); + + setbits_le32(&ahbcom_pci->pci_arbiter_ctr, + PCIBP_MODE | PCIREQ1 | PCIREQ0); + + /* PCI Configuration Registers for AHBPCI */ + writel(PCIWIN1_PCICMD | AHB_CFG_AHBPCI, + &ahbcom_pci->ahbpci_win1_ctr); + writel(phys_base + AHBPCI_OFFSET, &ahbconf_pci->basead); + writel(CONFIG_SYS_SDRAM_BASE & 0xf0000000, &ahbconf_pci->win1_basead); + writel(0xf0000000, &ahbconf_pci->win2_basead); + writel(SERREN | PERREN | MASTEREN | MEMEN, + &ahbconf_pci->cmnd_sts); + + /* PCI Configuration Registers for EHCI */ + writel(PCIWIN1_PCICMD | AHB_CFG_HOST, &ahbcom_pci->ahbpci_win1_ctr); + writel(phys_base + OHCI_OFFSET, &ahb_pciconf_ohci->basead); + writel(phys_base + EHCI_OFFSET, &ahb_pciconf_ehci->basead); + writel(SERREN | PERREN | MASTEREN | MEMEN, + &ahb_pciconf_ohci->cmnd_sts); + writel(SERREN | PERREN | MASTEREN | MEMEN, + &ahb_pciconf_ehci->cmnd_sts); + + /* Enable PCI interrupt */ + setbits_le32(&ahbcom_pci->pci_int_enable, + USBH_PMEEN | USBH_INTBEN | USBH_INTAEN); + + *hccr = (struct ehci_hccr *)((uint32_t)&rehci->hciversion); + cap_base = ehci_readl(&(*hccr)->cr_capbase); + *hcor = (struct ehci_hcor *)((uint32_t)*hccr + HC_LENGTH(cap_base)); + + return 0; +} -- 1.8.5

2 1

[U-Boot] [PATCH] omap3: igep00x0: fix NAND_BOOT for igep_0020 and igep_0030
by Pekon Gupta 03 Apr '14

03 Apr '14

fixes commit e37e954eba3edb5015a0a02880d57517f57425d8 OMAP3: igep00x0: Convert to ti_omap3_common.h. Above commit introduced compilation error when building igep0020 and igep0030 boards for NAND boot. It removed 'CONFIG_SYS_NAND_U_BOOT_START' which tells SPL/MLO offset of u-boot.img in NAND. Signed-off-by: Pekon Gupta <pekon(a)ti.com> --- include/configs/omap3_igep00x0.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 8b8583a..4e87d6b 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -199,6 +199,8 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 3 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 #endif #endif /* __IGEP00X0_H */ -- 1.8.5.1.163.gd7aced9

2 1

[U-Boot] [PATCH 1/2] lib: uuid: add function to generate UUID version 4
by Przemyslaw Marczak 03 Apr '14

03 Apr '14

lib/uuid.c: Add get_uuid_str() - this function returns 36 character hexadecimal ASCII string representation of a 128-bit (16 octets) UUID (Universally Unique Identifier) version 4 based on RFC4122, which is randomly generated. Source: https://www.ietf.org/rfc/rfc4122.txt Changes: Move functions: - disk/part_efi.c uuid_string() to lib/uuid.c -> uuid_bin_to_str() - disk/part_efi.c string_uuid() to lib/uuid.c -> uuid_str_to_bin() Update files: - include/common.h - disk/part_efi.c - lib/Makefile Signed-off-by: Przemyslaw Marczak <p.marczak(a)samsung.com> cc: Jason Hobbs <jason.hobbs(a)calxeda.com> cc: Stephen Warren <swarren(a)nvidia.com> cc: Lukasz Majewski <l.majewski(a)samsung.com> cc: trini(a)ti.com --- disk/part_efi.c | 90 ++++++------------------------------------ include/common.h | 7 +++- lib/Makefile | 4 ++ lib/uuid.c | 114 ++++++++++++++++++++++++++++++++++++++++++++++++++++-- 4 files changed, 131 insertions(+), 84 deletions(-) diff --git a/disk/part_efi.c b/disk/part_efi.c index 733d5bd..a280ab5 100644 --- a/disk/part_efi.c +++ b/disk/part_efi.c @@ -63,26 +63,6 @@ static char *print_efiname(gpt_entry *pte) return name; } -static void uuid_string(unsigned char *uuid, char *str) -{ - static const u8 le[16] = {3, 2, 1, 0, 5, 4, 7, 6, 8, 9, 10, 11, - 12, 13, 14, 15}; - int i; - - for (i = 0; i < 16; i++) { - sprintf(str, "%02x", uuid[le[i]]); - str += 2; - switch (i) { - case 3: - case 5: - case 7: - case 9: - *str++ = '-'; - break; - } - } -} - static efi_guid_t system_guid = PARTITION_SYSTEM_GUID; static inline int is_bootable(gpt_entry *p) @@ -103,6 +83,7 @@ void print_part_efi(block_dev_desc_t * dev_desc) gpt_entry *gpt_pte = NULL; int i = 0; char uuid[37]; + unsigned char *uuid_bin; if (!dev_desc) { printf("%s: Invalid Argument(s)\n", __func__); @@ -132,9 +113,11 @@ void print_part_efi(block_dev_desc_t * dev_desc) le64_to_cpu(gpt_pte[i].ending_lba), print_efiname(&gpt_pte[i])); printf("\tattrs:\t0x%016llx\n", gpt_pte[i].attributes.raw); - uuid_string(gpt_pte[i].partition_type_guid.b, uuid); + uuid_bin = (unsigned char *)gpt_pte[i].partition_type_guid.b; + uuid_bin_to_str(uuid_bin, uuid); printf("\ttype:\t%s\n", uuid); - uuid_string(gpt_pte[i].unique_partition_guid.b, uuid); + uuid_bin = (unsigned char *)gpt_pte[i].unique_partition_guid.b; + uuid_bin_to_str(uuid_bin, uuid); printf("\tuuid:\t%s\n", uuid); } @@ -182,7 +165,7 @@ int get_partition_info_efi(block_dev_desc_t * dev_desc, int part, sprintf((char *)info->type, "U-Boot"); info->bootable = is_bootable(&gpt_pte[part - 1]); #ifdef CONFIG_PARTITION_UUIDS - uuid_string(gpt_pte[part - 1].unique_partition_guid.b, info->uuid); + uuid_bin_to_str(gpt_pte[part - 1].unique_partition_guid.b, info->uuid); #endif debug("%s: start 0x" LBAF ", size 0x" LBAF ", name %s", __func__, @@ -237,60 +220,6 @@ static int set_protective_mbr(block_dev_desc_t *dev_desc) return 0; } -/** - * string_uuid(); Convert UUID stored as string to bytes - * - * @param uuid - UUID represented as string - * @param dst - GUID buffer - * - * @return return 0 on successful conversion - */ -static int string_uuid(char *uuid, u8 *dst) -{ - efi_guid_t guid; - u16 b, c, d; - u64 e; - u32 a; - u8 *p; - u8 i; - - const u8 uuid_str_len = 36; - - /* The UUID is written in text: */ - /* 1 9 14 19 24 */ - /* xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx */ - - debug("%s: uuid: %s\n", __func__, uuid); - - if (strlen(uuid) != uuid_str_len) - return -1; - - for (i = 0; i < uuid_str_len; i++) { - if ((i == 8) || (i == 13) || (i == 18) || (i == 23)) { - if (uuid[i] != '-') - return -1; - } else { - if (!isxdigit(uuid[i])) - return -1; - } - } - - a = (u32)simple_strtoul(uuid, NULL, 16); - b = (u16)simple_strtoul(uuid + 9, NULL, 16); - c = (u16)simple_strtoul(uuid + 14, NULL, 16); - d = (u16)simple_strtoul(uuid + 19, NULL, 16); - e = (u64)simple_strtoull(uuid + 24, NULL, 16); - - p = (u8 *) &e; - guid = EFI_GUID(a, b, c, d >> 8, d & 0xFF, - *(p + 5), *(p + 4), *(p + 3), - *(p + 2), *(p + 1) , *p); - - memcpy(dst, guid.b, sizeof(efi_guid_t)); - - return 0; -} - int write_gpt_table(block_dev_desc_t *dev_desc, gpt_header *gpt_h, gpt_entry *gpt_e) { @@ -358,6 +287,7 @@ int gpt_fill_pte(gpt_header *gpt_h, gpt_entry *gpt_e, size_t efiname_len, dosname_len; #ifdef CONFIG_PARTITION_UUIDS char *str_uuid; + unsigned char *bin_uuid; #endif for (i = 0; i < parts; i++) { @@ -391,7 +321,9 @@ int gpt_fill_pte(gpt_header *gpt_h, gpt_entry *gpt_e, #ifdef CONFIG_PARTITION_UUIDS str_uuid = partitions[i].uuid; - if (string_uuid(str_uuid, gpt_e[i].unique_partition_guid.b)) { + bin_uuid = gpt_e[i].unique_partition_guid.b; + + if (uuid_str_to_bin(str_uuid, bin_uuid)) { printf("Partition no. %d: invalid guid: %s\n", i, str_uuid); return -1; @@ -438,7 +370,7 @@ int gpt_fill_header(block_dev_desc_t *dev_desc, gpt_header *gpt_h, gpt_h->header_crc32 = 0; gpt_h->partition_entry_array_crc32 = 0; - if (string_uuid(str_guid, gpt_h->disk_guid.b)) + if (uuid_str_to_bin(str_guid, gpt_h->disk_guid.b)) return -1; return 0; diff --git a/include/common.h b/include/common.h index 96a45a6..18f0224 100644 --- a/include/common.h +++ b/include/common.h @@ -815,7 +815,9 @@ void udelay (unsigned long); void mdelay(unsigned long); /* lib/uuid.c */ -void uuid_str_to_bin(const char *uuid, unsigned char *out); +char *get_uuid_str(void); +int uuid_bin_to_str(unsigned char *uuid, char *str); +int uuid_str_to_bin(char *uuid, unsigned char *out); int uuid_str_valid(const char *uuid); /* lib/vsprintf.c */ @@ -830,7 +832,8 @@ char * strmhz(char *buf, unsigned long hz); /* lib/rand.c */ #if defined(CONFIG_RANDOM_MACADDR) || \ defined(CONFIG_BOOTP_RANDOM_DELAY) || \ - defined(CONFIG_CMD_LINK_LOCAL) + defined(CONFIG_CMD_LINK_LOCAL) || \ + defined(CONFIG_PARTITION_UUIDS) #define RAND_MAX -1U void srand(unsigned int seed); unsigned int rand(void); diff --git a/lib/Makefile b/lib/Makefile index dedb97b..ca7f878 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -65,3 +65,7 @@ obj-y += vsprintf.o obj-$(CONFIG_RANDOM_MACADDR) += rand.o obj-$(CONFIG_BOOTP_RANDOM_DELAY) += rand.o obj-$(CONFIG_CMD_LINK_LOCAL) += rand.o +ifdef CONFIG_PARTITION_UUIDS +obj-y += rand.o +obj-y += uuid.o +endif diff --git a/lib/uuid.c b/lib/uuid.c index c48bf38..d75ae16 100644 --- a/lib/uuid.c +++ b/lib/uuid.c @@ -5,7 +5,29 @@ */ #include <linux/ctype.h> -#include "common.h" +#include <errno.h> +#include <common.h> +#include <part_efi.h> +#include <malloc.h> + +#define UUID_STR_BYTE_LEN 37 + +#define UUID_VERSION_CLEAR_BITS 0x0fff +#define UUID_VERSION_SHIFT 12 +#define UUID_VERSION 0x4 + +#define UUID_VARIANT_CLEAR_BITS 0x3f +#define UUID_VARIANT_SHIFT 7 +#define UUID_VARIANT 0x1 + +struct uuid { + unsigned int time_low; + unsigned short time_mid; + unsigned short time_hi_and_version; + unsigned char clock_seq_hi_and_reserved; + unsigned char clock_seq_low; + unsigned char node[6]; +}; /* * This is what a UUID string looks like. @@ -43,14 +65,17 @@ int uuid_str_valid(const char *uuid) return 1; } -void uuid_str_to_bin(const char *uuid, unsigned char *out) +int uuid_str_to_bin(char *uuid, unsigned char *out) { uint16_t tmp16; uint32_t tmp32; uint64_t tmp64; if (!uuid || !out) - return; + return -EINVAL; + + if (!uuid_str_valid(uuid)) + return -EINVAL; tmp32 = cpu_to_le32(simple_strtoul(uuid, NULL, 16)); memcpy(out, &tmp32, 4); @@ -66,4 +91,87 @@ void uuid_str_to_bin(const char *uuid, unsigned char *out) tmp64 = cpu_to_be64(simple_strtoull(uuid + 24, NULL, 16)); memcpy(out + 10, (char *)&tmp64 + 2, 6); + + return 0; +} + +int uuid_bin_to_str(unsigned char *uuid, char *str) +{ + static const u8 le[16] = {3, 2, 1, 0, 5, 4, 7, 6, 8, 9, 10, 11, + 12, 13, 14, 15}; + char *str_ptr = str; + int i; + + for (i = 0; i < 16; i++) { + sprintf(str, "%02x", uuid[le[i]]); + str += 2; + switch (i) { + case 3: + case 5: + case 7: + case 9: + *str++ = '-'; + break; + } + } + + if (!uuid_str_valid(str_ptr)) + return -EINVAL; + + return 0; +} + +/* + * get_uuid_str() - this function returns pointer to 36 character hexadecimal + * ASCII string representation of a 128-bit (16 octets) UUID (Universally + * Unique Identifier) version 4 based on RFC4122. + * source: https://www.ietf.org/rfc/rfc4122.txt + * + * Layout of UUID Version 4: + * timestamp - 60-bit: time_low, time_mid, time_hi_and_version + * version - 4 bit (bit 4 through 7 of the time_hi_and_version) + * clock seq - 14 bit: clock_seq_hi_and_reserved, clock_seq_low + * variant: - bit 6 and 7 of clock_seq_hi_and_reserved + * node - 48 bit + * In this version all fields beside 4 bit version are randomly generated. + * + * @ret: pointer to 36 bytes len characters array + */ +char *get_uuid_str(void) +{ + struct uuid uuid; + char *uuid_str = NULL; + int *ptr = (int *)&uuid; + int i; + + uuid_str = malloc(UUID_STR_BYTE_LEN); + if (!uuid_str) { + error("uuid_str pointer is null"); + return NULL; + } + + memset(&uuid, 0x0, sizeof(uuid)); + + /* Set all fields randomly */ + for (i = 0; i < sizeof(uuid) / 4; i++) + *(ptr + i) = rand(); + + /* Set V4 format */ + uuid.time_hi_and_version &= UUID_VERSION_CLEAR_BITS; + uuid.time_hi_and_version |= UUID_VERSION << UUID_VERSION_SHIFT; + + uuid.clock_seq_hi_and_reserved &= UUID_VARIANT_CLEAR_BITS; + uuid.clock_seq_hi_and_reserved |= UUID_VARIANT << UUID_VARIANT_SHIFT; + + uuid_bin_to_str((unsigned char *)&uuid, uuid_str); + + if (!uuid_str_valid(uuid_str)) { + error("Invalid UUID string"); + return NULL; + } + + /* Put end of string */ + uuid_str[UUID_STR_BYTE_LEN - 1] = '\0'; + + return uuid_str; } -- 1.7.9.5

5 89

[U-Boot] [UBOOT][PATCH 0/5] dra7: Add partition table entry and qspi boot config
by Sourav Poddar 03 Apr '14

03 Apr '14

The following patch series aims at 1. adding a seperate defconfig for qspi on dra7. 2. Also populate the qspi partition table for dra7 evm boards. 3. cleanup and fixes around qspi4 pin mode and bulk erase respectively. Tested on J6 evm(PG1.1) with the following sysconfig boot settings. sysconfig[5:0] = 100111. Here is the log till uboot prompt: --------------------------------- U-Boot SPL 2014.04-rc3-00005-ge97693a (Apr 02 2014 - 15:35:24) DRA752 ES1.1 U-Boot 2014.04-rc3-00005-ge97693a (Apr 02 2014 - 15:35:24) CPU : DRA752 ES1.1 Board: DRA7xx I2C: ready DRAM: 1.5 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 SCSI: SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB, mapped at 5c000000 *** Warning - bad CRC, using default environment SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: <ethaddr> not set. Validating first E-fuse MAC cpsw Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed. Hit any key to stop autoboot: 0 Sourav Poddar (5): board.cfg: am43xx: Add QSPI boot config. qspi: add support for qspi4 device configs: dra7-evm: Add mtd parts info for qspi. configs: dra7-evm: change uboot offset spi: ti_qspi: Add delay for successful bulk erase. arch/arm/include/asm/arch-omap5/spl.h | 4 +++ boards.cfg | 2 ++ drivers/spi/ti_qspi.c | 3 +++ include/configs/dra7xx_evm.h | 48 ++++++++++++++++++++++++++++++++- 4 files changed, 56 insertions(+), 1 deletion(-) -- 1.7.9.5

4 11

[U-Boot] [PATCH 1/8] arm: rmobile: Merge functions to get the CPU information of R8A7790 and R8A7791
by Nobuhiro Iwamatsu 03 Apr '14

03 Apr '14

Functions to get the CPU information of R8A7790 and R8A7791 are common. This merges these as cpu_info-rcar.c. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj(a)renesas.com> --- arch/arm/cpu/armv7/rmobile/Makefile | 4 ++-- arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c | 22 -------------------- arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c | 29 --------------------------- arch/arm/cpu/armv7/rmobile/cpu_info-rcar.c | 21 +++++++++++++++++++ 4 files changed, 23 insertions(+), 53 deletions(-) delete mode 100644 arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c delete mode 100644 arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c create mode 100644 arch/arm/cpu/armv7/rmobile/cpu_info-rcar.c diff --git a/arch/arm/cpu/armv7/rmobile/Makefile b/arch/arm/cpu/armv7/rmobile/Makefile index 2221999..fad004c 100644 --- a/arch/arm/cpu/armv7/rmobile/Makefile +++ b/arch/arm/cpu/armv7/rmobile/Makefile @@ -11,7 +11,7 @@ obj-y += emac.o obj-$(CONFIG_DISPLAY_BOARDINFO) += board.o obj-$(CONFIG_GLOBAL_TIMER) += timer.o obj-$(CONFIG_R8A7740) += lowlevel_init.o cpu_info-r8a7740.o pfc-r8a7740.o -obj-$(CONFIG_R8A7790) += lowlevel_init_ca15.o cpu_info-r8a7790.o pfc-r8a7790.o -obj-$(CONFIG_R8A7791) += lowlevel_init_ca15.o cpu_info-r8a7791.o pfc-r8a7791.o +obj-$(CONFIG_R8A7790) += lowlevel_init_ca15.o cpu_info-rcar.o pfc-r8a7790.o +obj-$(CONFIG_R8A7791) += lowlevel_init_ca15.o cpu_info-rcar.o pfc-r8a7791.o obj-$(CONFIG_SH73A0) += lowlevel_init.o cpu_info-sh73a0.o pfc-sh73a0.o obj-$(CONFIG_TMU_TIMER) += ../../../../sh/lib/time.o diff --git a/arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c b/arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c deleted file mode 100644 index 7232e23..0000000 --- a/arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c - * This file is r8a7790 processor support. - * - * Copyright (C) 2013 Renesas Electronics Corporation - * - * SPDX-License-Identifier: GPL-2.0 - */ -#include <common.h> -#include <asm/io.h> - -#define PRR 0xFF000044 - -u32 rmobile_get_cpu_type(void) -{ - return (readl(PRR) & 0x00007F00) >> 8; -} - -u32 rmobile_get_cpu_rev_integer(void) -{ - return (readl(PRR) & 0x000000F0) >> 4; -} diff --git a/arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c b/arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c deleted file mode 100644 index 2de58ed..0000000 --- a/arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c - * - * Copyright (C) 2013 Renesas Electronics Corporation - * - * SPDX-License-Identifier: GPL-2.0 - */ -#include <common.h> -#include <asm/io.h> - -#define PRR 0xFF000044 - -u32 rmobile_get_cpu_type(void) -{ - u32 product; - - product = readl(PRR); - - return (u32)((product & 0x00007F00) >> 8); -} - -u32 rmobile_get_cpu_rev_integer(void) -{ - u32 product; - - product = readl(PRR); - - return (u32)((product & 0x000000F0) >> 4); -} diff --git a/arch/arm/cpu/armv7/rmobile/cpu_info-rcar.c b/arch/arm/cpu/armv7/rmobile/cpu_info-rcar.c new file mode 100644 index 0000000..0289ece --- /dev/null +++ b/arch/arm/cpu/armv7/rmobile/cpu_info-rcar.c @@ -0,0 +1,21 @@ +/* + * arch/arm/cpu/armv7/rmobile/cpu_info-rcar.c + * + * Copyright (C) 2013,2014 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0 + */ +#include <common.h> +#include <asm/io.h> + +#define PRR 0xFF000044 + +u32 rmobile_get_cpu_type(void) +{ + return (readl(PRR) & 0x00007F00) >> 8; +} + +u32 rmobile_get_cpu_rev_integer(void) +{ + return (readl(PRR) & 0x000000F0) >> 4; +} -- 1.8.5

1 7

[U-Boot] [PATCH 7/10] driver/mtd/spi:Read 8KB data chunk during u-boot load in SPL
by Prabhakar Kushwaha 03 Apr '14

03 Apr '14

SPI driver perform its operation(read/write) on 64KB buffer chunk for data greater than 64KB. This buffer chunk is allocated from system heap. During SPL boot, 768KB of data is read from SPI flash. Here, heap size may not be sufficient enough to full-fill 64KB buffer requirement of SPI driver. So break down u-boot read operation at 8KB of chunk. Also, fix a warning i.e. "unused variable buf" during CONFIG_FSL_CORENET Signed-off-by: Prabhakar Kushwaha <prabhakar(a)freescale.com> --- drivers/mtd/spi/fsl_espi_spl.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/spi/fsl_espi_spl.c b/drivers/mtd/spi/fsl_espi_spl.c index e5ac79b..a55d741 100644 --- a/drivers/mtd/spi/fsl_espi_spl.c +++ b/drivers/mtd/spi/fsl_espi_spl.c @@ -20,8 +20,10 @@ void spi_boot(void) { void (*uboot)(void) __noreturn; - u32 offset, code_len; + u32 offset, code_len, copy_len = 0; +#ifndef CONFIG_FSL_CORENET unsigned char *buf = NULL; +#endif struct spi_flash *flash; flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS, @@ -56,8 +58,15 @@ void spi_boot(void) code_len = code_len - CONFIG_SPL_MAX_SIZE; #endif /* copy code to DDR */ - spi_flash_read(flash, offset, code_len, - (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_DST); + printf("Loading second stage boot loader "); + while (copy_len <= code_len) { + spi_flash_read(flash, offset + copy_len, 0x2000, + (void *)(CONFIG_SYS_SPI_FLASH_U_BOOT_DST + + copy_len)); + copy_len = copy_len + 0x2000; + putc('.'); + } + /* * Jump to U-Boot image */ -- 1.7.9.5

2 4

[U-Boot] [PATCH] usb: ehci: rmobile: Add support ehci host driver of rmobile SoCs
by Nobuhiro Iwamatsu 03 Apr '14

03 Apr '14

The rmobile SoC has usb host controller. This supports USB controllers listed in the R8A7790, R8A7791 and R8A7740. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj(a)renesas.com> --- arch/arm/include/asm/arch-rmobile/ehci-rmobile.h | 169 +++++++++++++++++++++++ drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-rmobile.c | 109 +++++++++++++++ 3 files changed, 279 insertions(+) create mode 100644 arch/arm/include/asm/arch-rmobile/ehci-rmobile.h create mode 100644 drivers/usb/host/ehci-rmobile.c diff --git a/arch/arm/include/asm/arch-rmobile/ehci-rmobile.h b/arch/arm/include/asm/arch-rmobile/ehci-rmobile.h new file mode 100644 index 0000000..126b104 --- /dev/null +++ b/arch/arm/include/asm/arch-rmobile/ehci-rmobile.h @@ -0,0 +1,169 @@ +/* + * Copyright (C) 2013,2014 Renesas Electronics Corporation + * Copyright (C) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj(a)renesas.com> + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __EHCI_RMOBILE_H__ +#define __EHCI_RMOBILE_H__ + +/* Register offset */ +#define OHCI_OFFSET 0x00 +#define OHCI_SIZE 0x1000 +#define EHCI_OFFSET 0x1000 +#define EHCI_SIZE 0x1000 + +#define EHCI_USBCMD (EHCI_OFFSET + 0x0020) + +/* USBCTR */ +#define DIRPD (1 << 8) +#define PLL_RST (1 << 2) +#define PCICLK_MASK (1 << 1) +#define USBH_RST (1 << 0) + +/* CMND_STS */ +#define SERREN (1 << 8) +#define PERREN (1 << 6) +#define MASTEREN (1 << 2) +#define MEMEN (1 << 1) + +/* PCIAHB_WIN1_CTR and PCIAHB_WIN2_CTR */ +#define PCIAHB_WIN_PREFETCH ((1 << 1)|(1 << 0)) + +/* AHBPCI_WIN1_CTR */ +#define PCIWIN1_PCICMD ((1 << 3)|(1 << 1)) +#define AHB_CFG_AHBPCI 0x40000000 +#define AHB_CFG_HOST 0x80000000 + +/* AHBPCI_WIN2_CTR */ +#define PCIWIN2_PCICMD ((1 << 2)|(1 << 1)) + +/* PCI_INT_ENABLE */ +#define USBH_PMEEN (1 << 19) +#define USBH_INTBEN (1 << 17) +#define USBH_INTAEN (1 << 16) + +/* AHB_BUS_CTR */ +#define SMODE_READY_CTR (1 << 17) +#define SMODE_READ_BURST (1 << 16) +#define MMODE_HBUSREQ (1 << 7) +#define MMODE_BOUNDARY ((1 << 6)|(1 << 5)) +#define MMODE_BURST_WIDTH ((1 << 4)|(1 << 3)) +#define MMODE_SINGLE_MODE ((1 << 4)|(1 << 3)) +#define MMODE_WR_INCR (1 << 2) +#define MMODE_BYTE_BURST (1 << 1) +#define MMODE_HTRANS (1 << 0) + +/* PCI_ARBITER_CTR */ +#define PCIBUS_PARK_TIMER 0x00FF0000 +#define PCIBUS_PARK_TIMER_SET 0x00070000 +#define PCIBP_MODE (1 << 12) +#define PCIREQ7 (1 << 7) +#define PCIREQ6 (1 << 6) +#define PCIREQ5 (1 << 5) +#define PCIREQ4 (1 << 4) +#define PCIREQ3 (1 << 3) +#define PCIREQ2 (1 << 2) +#define PCIREQ1 (1 << 1) +#define PCIREQ0 (1 << 0) + +#define PHYS_OFFSET CONFIG_SYS_SDRAM_BASE +#define SMSTPCR7 0xE615014C +#define SMSTPCR703 (1 << 3) + +/* Init AHB master and slave functions of the host logic */ +#define AHB_BUS_CTR_INIT \ + (SMODE_READY_CTR | MMODE_HBUSREQ | MMODE_WR_INCR | \ + MMODE_BYTE_BURST | MMODE_HTRANS) + +#define USBCTR_WIN_SIZE_1GB 0x800 + +/* PCI Configuration Registers */ +#define PCI_CONF_OHCI_OFFSET 0x10000 +#define PCI_CONF_EHCI_OFFSET 0x10100 +struct ahb_pciconf { + u32 vid_did; + u32 cmnd_sts; + u32 rev; + u32 cache_line; + u32 basead; +}; + +/* PCI Configuration Registers for AHB-PCI Bridge Registers */ +#define PCI_CONF_AHBPCI_OFFSET 0x10000 +struct ahbconf_pci_bridge { + u32 vid_did; /* 0x00 */ + u32 cmnd_sts; + u32 revid_cc; + u32 cls_lt_ht_bist; + u32 basead; /* 0x10 */ + u32 win1_basead; + u32 win2_basead; + u32 dummy0[5]; + u32 ssvdi_ssid; /* 0x2C */ + u32 dummy1[4]; + u32 intr_line_pin; +}; + +/* AHB-PCI Bridge PCI Communication Registers */ +#define AHBPCI_OFFSET 0x10800 +struct ahbcom_pci_bridge { + u32 pciahb_win1_ctr; /* 0x00 */ + u32 pciahb_win2_ctr; + u32 pciahb_dct_ctr; + u32 dummy0; + u32 ahbpci_win1_ctr; /* 0x10 */ + u32 ahbpci_win2_ctr; + u32 dummy1; + u32 ahbpci_dct_ctr; + u32 pci_int_enable; /* 0x20 */ + u32 pci_int_status; + u32 dummy2[2]; + u32 ahb_bus_ctr; /* 0x30 */ + u32 usbctr; + u32 dummy3[2]; + u32 pci_arbiter_ctr; /* 0x40 */ + u32 dummy4; + u32 pci_unit_rev; /* 0x48 */ +}; + +struct rmobile_ehci_reg { + u32 hciversion; /* hciversion/caplength */ + u32 hcsparams; /* hcsparams */ + u32 hccparams; /* hccparams */ + u32 hcsp_portroute; /* hcsp_portroute */ + u32 usbcmd; /* usbcmd */ + u32 usbsts; /* usbsts */ + u32 usbintr; /* usbintr */ + u32 frindex; /* frindex */ + u32 ctrldssegment; /* ctrldssegment */ + u32 periodiclistbase; /* periodiclistbase */ + u32 asynclistaddr; /* asynclistaddr */ + u32 dummy[9]; + u32 configflag; /* configflag */ + u32 portsc; /* portsc */ +}; + +#if defined(CONFIG_R8A7740) +static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { + 0xC6700000 +}; +#elif defined(CONFIG_R8A7790) +static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { + 0xEE080000, /* USB0 (EHCI) */ + 0xEE0A0000, /* USB1 */ + 0xEE0C0000, /* USB2 */ + 0xEE000000 /* USB3 (USB3.0 Host)*/ +}; +#elif defined(CONFIG_R8A7791) +static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { + 0xEE080000, /* USB0 (EHCI) */ + 0xEE0C0000, /* USB1 */ + 0xEE000000 /* USB3 (USB3.0 Host)*/ +}; +#else +#error rmobile EHCI USB driver not supported on this platform +#endif + +#endif /* __EHCI_RMOBILE_H__ */ diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 578b097..b301e28 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o +obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o # xhci obj-$(CONFIG_USB_XHCI) += xhci.o xhci-mem.o xhci-ring.o diff --git a/drivers/usb/host/ehci-rmobile.c b/drivers/usb/host/ehci-rmobile.c new file mode 100644 index 0000000..35eca12 --- /dev/null +++ b/drivers/usb/host/ehci-rmobile.c @@ -0,0 +1,109 @@ +/* + * EHCI HCD (Host Controller Driver) for USB. + * + * Copyright (C) 2013,2014 Renesas Electronics Corporation + * Copyright (C) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj(a)renesas.com> + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/ehci-rmobile.h> +#include "ehci.h" + +int ehci_hcd_stop(int index) +{ + int i; + u32 base; + struct ahbcom_pci_bridge *ahbcom_pci; + + base = usb_base_address[index]; + ahbcom_pci = (struct ahbcom_pci_bridge *)(base + AHBPCI_OFFSET); + writel(0, &ahbcom_pci->ahb_bus_ctr); + + /* reset ehci */ + setbits_le32(base + EHCI_USBCMD, CMD_RESET); + for (i = 100; i > 0; i--) { + if (!(readl(base + EHCI_USBCMD) & CMD_RESET)) + break; + udelay(100); + } + + if (!i) + printf("error : ehci(%d) reset failed.\n", index); + + if (index == (CONFIG_USB_MAX_CONTROLLER_COUNT - 1)) + setbits_le32(SMSTPCR7, SMSTPCR703); + + return 0; +} + +int ehci_hcd_init(int index, enum usb_init_type init, + struct ehci_hccr **hccr, struct ehci_hcor **hcor) +{ + u32 base; + u32 phys_base; + struct rmobile_ehci_reg *rehci; + struct ahbcom_pci_bridge *ahbcom_pci; + struct ahbconf_pci_bridge *ahbconf_pci; + struct ahb_pciconf *ahb_pciconf_ohci; + struct ahb_pciconf *ahb_pciconf_ehci; + uint32_t cap_base; + + base = usb_base_address[index]; + phys_base = base; + if (index == 0) + clrbits_le32(SMSTPCR7, SMSTPCR703); + + rehci = (struct rmobile_ehci_reg *)(base + EHCI_OFFSET); + ahbcom_pci = (struct ahbcom_pci_bridge *)(base + AHBPCI_OFFSET); + ahbconf_pci = + (struct ahbconf_pci_bridge *)(base + PCI_CONF_AHBPCI_OFFSET); + ahb_pciconf_ohci = (struct ahb_pciconf *)(base + PCI_CONF_OHCI_OFFSET); + ahb_pciconf_ehci = (struct ahb_pciconf *)(base + PCI_CONF_EHCI_OFFSET); + + /* Clock & Reset & Direct Power Down */ + clrsetbits_be32(&ahbcom_pci->usbctr, + (DIRPD | PCICLK_MASK | USBH_RST), USBCTR_WIN_SIZE_1GB); + clrbits_be32(&ahbcom_pci->usbctr, PLL_RST); + + /* AHB-PCI Bridge Communication Registers */ + writel(AHB_BUS_CTR_INIT, &ahbcom_pci->ahb_bus_ctr); + writel((PHYS_OFFSET & 0xf0000000) | PCIAHB_WIN_PREFETCH, + &ahbcom_pci->pciahb_win1_ctr); + writel(0xf0000000 | PCIAHB_WIN_PREFETCH, + &ahbcom_pci->pciahb_win2_ctr); + writel(phys_base | PCIWIN2_PCICMD, &ahbcom_pci->ahbpci_win2_ctr); + + setbits_le32(&ahbcom_pci->pci_arbiter_ctr, + PCIBP_MODE | PCIREQ1 | PCIREQ0); + + /* PCI Configuration Registers for AHBPCI */ + writel(PCIWIN1_PCICMD | AHB_CFG_AHBPCI, + &ahbcom_pci->ahbpci_win1_ctr); + writel(phys_base + AHBPCI_OFFSET, &ahbconf_pci->basead); + writel(PHYS_OFFSET & 0xf0000000, &ahbconf_pci->win1_basead); + writel(0xf0000000, &ahbconf_pci->win2_basead); + writel(SERREN | PERREN | MASTEREN | MEMEN, + &ahbconf_pci->cmnd_sts); + + /* PCI Configuration Registers for EHCI */ + writel(PCIWIN1_PCICMD | AHB_CFG_HOST, &ahbcom_pci->ahbpci_win1_ctr); + writel(phys_base + OHCI_OFFSET, &ahb_pciconf_ohci->basead); + writel(phys_base + EHCI_OFFSET, &ahb_pciconf_ehci->basead); + writel(SERREN | PERREN | MASTEREN | MEMEN, + &ahb_pciconf_ohci->cmnd_sts); + writel(SERREN | PERREN | MASTEREN | MEMEN, + &ahb_pciconf_ehci->cmnd_sts); + + /* Enable PCI interrupt */ + setbits_le32(&ahbcom_pci->pci_int_enable, + USBH_PMEEN | USBH_INTBEN | USBH_INTAEN); + + *hccr = (struct ehci_hccr *)((uint32_t)&rehci->hciversion); + cap_base = ehci_readl(&(*hccr)->cr_capbase); + *hcor = (struct ehci_hcor *)((uint32_t)*hccr + HC_LENGTH(cap_base)); + + return 0; +} -- 1.8.5

2 2

[U-Boot] [PATCH] ahci: Fix data abort on multiple scsi resets.
by Roger Quadros 02 Apr '14

02 Apr '14

Commit 2faf5fb82ed6 introduced a regression that causes a data abort when running scsi init followed by scsi reset. There are 2 problems with the original commit 1) ALLOC_CACHE_ALIGN_BUFFER() allocates memory on the stack but is assigned to ataid[port] and used by other functions. 2) The function ata_scsiop_inquiry() tries to free memory which was never allocated on the heap. Fix these problems by using tmpid as a temporary cache aligned buffer. Allocate memory separately for ataid[port] and re-use it if required. Fixes: 2faf5fb82ed6 (ahci: Fix cache align error messages) Reported-by: Eli Nidam <elini(a)marvell.com> Signed-off-by: Roger Quadros <rogerq(a)ti.com> --- drivers/block/ahci.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c index a409f63..c8f6573 100644 --- a/drivers/block/ahci.c +++ b/drivers/block/ahci.c @@ -623,6 +623,7 @@ static int ata_scsiop_inquiry(ccb *pccb) 95 - 4, }; u8 fis[20]; + u16 *idbuf; ALLOC_CACHE_ALIGN_BUFFER(u16, tmpid, ATA_ID_WORDS); u8 port; @@ -649,17 +650,25 @@ static int ata_scsiop_inquiry(ccb *pccb) return -EIO; } - if (ataid[port]) - free(ataid[port]); - ataid[port] = tmpid; - ata_swap_buf_le16(tmpid, ATA_ID_WORDS); + if (!ataid[port]) { + ataid[port] = malloc(ATA_ID_WORDS * 2); + if (!ataid[port]) { + printf("%s: No memory for ataid[port]\n", __func__); + return -ENOMEM; + } + } + + idbuf = ataid[port]; + + memcpy(idbuf, tmpid, ATA_ID_WORDS * 2); + ata_swap_buf_le16(idbuf, ATA_ID_WORDS); memcpy(&pccb->pdata[8], "ATA ", 8); - ata_id_strcpy((u16 *) &pccb->pdata[16], &tmpid[ATA_ID_PROD], 16); - ata_id_strcpy((u16 *) &pccb->pdata[32], &tmpid[ATA_ID_FW_REV], 4); + ata_id_strcpy((u16 *)&pccb->pdata[16], &idbuf[ATA_ID_PROD], 16); + ata_id_strcpy((u16 *)&pccb->pdata[32], &idbuf[ATA_ID_FW_REV], 4); #ifdef DEBUG - ata_dump_id(tmpid); + ata_dump_id(idbuf); #endif return 0; } -- 1.8.3.2

2 1