January 2014 - U-Boot

[U-Boot] Porting U-boot
by JYOTI DUBEY 30 Jan '14

30 Jan '14

After compiling the u-boot code what steps must be followed to boot the current system (system with Grub) with u-boot?I mean how can I port my system with the u-boot which I compiled?

2 1

[U-Boot] Link
by JYOTI DUBEY 30 Jan '14

30 Jan '14

Can someone provide me link to download uboot-production source code??

2 1

[U-Boot] [PATCH] arm/da850 : [RFC] add bootdsp to cmd_elf
by Paul Chavent 30 Jan '14

30 Jan '14

On platform with a DSP co-processor, add a command to boot an elf on it. * Test * This patch has been tested on an OMAP-L138 EVM with DSP code generated with TI's code generation tools 7.4.6 with the --abi=eabi option. * Bugs * Some elf generated with older TI's cgt have mis-aligned header sections that lead to u-boot freeze. This point can be checked with readelf (see "Start of program headers" and/or "Start of section headers") if you experience such problem. * Discussion * Our first question is about the interest of the u-boot community for this feature ? For the implementation, we tried to separate platform specific code (dsp's reset and entry point) from the elf generic code (check and load elf in memory). We would like to have your opinion on this design. Signed-off-by: Paul Chavent <paul.chavent(a)onera.fr> Cc: Tom Rini <trini(a)ti.com> --- board/davinci/da8xxevm/da850evm.c | 43 ++++++++++++++++++++++++++ common/cmd_elf.c | 65 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 108 insertions(+) diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c index 85b4830..3d361b6 100644 --- a/board/davinci/da8xxevm/da850evm.c +++ b/board/davinci/da8xxevm/da850evm.c @@ -121,6 +121,49 @@ static void dspwake(void) writel(val, (PSC0_MDCTL + (15 * 4))); } +void dsp_reset_assert(void) +{ + unsigned int id = DAVINCI_LPSC_GEM; + dv_reg_p mdstat, mdctl; + struct davinci_psc_regs *psc_regs; + + psc_regs = davinci_psc0_regs; + mdstat = &psc_regs->psc0.mdstat[id]; + mdctl = &psc_regs->psc0.mdctl[id]; + + if ((*mdstat & 0x100) == 0x000) + return; + + *mdctl &= ~0x100; + + while ((*mdstat & 0x100) != 0x000) + ; +} + +void dsp_entry_point(unsigned long addr) +{ + writel(addr, HOST1CFG); +} + +void dsp_reset_deassert(void) +{ + unsigned int id = DAVINCI_LPSC_GEM; + dv_reg_p mdstat, mdctl; + struct davinci_psc_regs *psc_regs; + + psc_regs = davinci_psc0_regs; + mdstat = &psc_regs->psc0.mdstat[id]; + mdctl = &psc_regs->psc0.mdctl[id]; + + if ((*mdstat & 0x100) == 0x100) + return; + + *mdctl |= 0x100; + + while ((*mdstat & 0x100) != 0x100) + ; +} + int misc_init_r(void) { dspwake(); diff --git a/common/cmd_elf.c b/common/cmd_elf.c index ab9c7e3..ae7b6e1 100644 --- a/common/cmd_elf.c +++ b/common/cmd_elf.c @@ -24,6 +24,12 @@ DECLARE_GLOBAL_DATA_PTR; #endif +#if defined(CONFIG_MACH_DAVINCI_DA850_EVM) +extern void dsp_reset_assert(void); +extern void dsp_entry_point(unsigned long addr); +extern void dsp_reset_deassert(void); +#endif + static unsigned long load_elf_image_phdr(unsigned long addr); static unsigned long load_elf_image_shdr(unsigned long addr); @@ -269,6 +275,55 @@ int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; } +#if defined(CONFIG_MACH_DAVINCI_DA850_EVM) +/* ====================================================================== + * Interpreter command to boot the companion dsp with an arbitrary ELF + * image from memory. Can be improved to bring bootargs + * ====================================================================== */ +int do_bootdsp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + unsigned long addr; /* Address of the ELF image */ + char *sload, *saddr; + + sload = saddr = NULL; + if (argc == 3) { + sload = argv[1]; + saddr = argv[2]; + } else if (argc == 2) { + if (argv[1][0] == '-') + sload = argv[1]; + else + saddr = argv[1]; + } + + if (saddr) + addr = simple_strtoul(saddr, NULL, 16); + else + addr = load_addr; + + if (!valid_elf_image(addr)) + return 1; + + /* hold the reset */ + dsp_reset_assert(); + + if (sload && sload[1] == 'p') + addr = load_elf_image_phdr(addr); + else + addr = load_elf_image_shdr(addr); + + printf("## Starting dsp's application at 0x%08lx ...\n", addr); + + /* setup the DSP reset vector */ + dsp_entry_point(addr); + + /* release the reset */ + dsp_reset_deassert(); + + return 0; +} +#endif /* defined(CONFIG_MACH_DAVINCI_DA850_EVM) */ + /* ====================================================================== * A very simple elf loader, assumes the image is valid, returns the * entry point address. @@ -367,3 +422,13 @@ U_BOOT_CMD( "Boot vxWorks from an ELF image", " [address] - load address of vxWorks ELF image." ); + +#if defined(CONFIG_MACH_DAVINCI_DA850_EVM) +U_BOOT_CMD( + bootdsp, 3, 0, do_bootdsp, + "Boot dsp from an ELF image in memory", + "[-p|-s] [address]\n" + "\t- load ELF image at [address] via program headers (-p)\n" + "\t or via section headers (-s)" +); +#endif /* defined(CONFIG_MACH_DAVINCI_DA850_EVM) */ -- 1.7.12.1

2 2

[U-Boot] u-boot spl with fat32 on arm
by Michal Simek 30 Jan '14

30 Jan '14

Hi guys, I do play a little bit with u-boot spl and I am curious about fat32 implementation. There is MAX_CLUSTSIZE which is 65k and there are 3 buffers in fat.c code do_fat_read_at_block get_contents_vfatname_block get_dentfromdir_block All these 3 are placed to bss section. I have just 192k of memory for SPL that's why I tried 2 things 1. Place these 3 fat arrays to different memory which is working fine 2. Decrease MAX_CLUSTSIZE to any low value (I do use 8k). Unfortunately if I decrease MAX_CLUSTSIZE and add them to bss section SPL doesn't work. If I add them to a different section in front of or behind bss everything is just fine. That's why I have a question where can be the problem in this behaviour that keeping 8k MAX_CLUSTSIZE in bss section doesn't work and keeping 8k MAX_CLUSTSIZE out of bss section works. bss relocation is not done in SPL. Maybe someone could know where the problem can be before I look at ASM code. Thanks for your hints, Michal -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform

2 2

[U-Boot] [PATCH] fsl_esdhc: Add Auto command 12 interrupt bit detecting
by Haijun Zhang 30 Jan '14

30 Jan '14

When Auto-CMD12 is used, the corresponding interrupt and error bit should be enabled and set to reflect auto cmd 12 error. Also add other command error detecting, like command index error, CRC error etc. Without this command error bit set system will hang due to the while loop. Signed-off-by: Haijun Zhang <Haijun.Zhang(a)freescale.com> --- drivers/mmc/fsl_esdhc.c | 10 +++++----- include/fsl_esdhc.h | 3 ++- 2 files changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index dc1d002..5aa592b 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -342,13 +342,13 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) #endif /* Wait for the command to complete */ - while (!(esdhc_read32(&regs->irqstat) & (IRQSTAT_CC | IRQSTAT_CTOE))) + while (!(esdhc_read32(&regs->irqstat) & (IRQSTAT_CC | CMD_ERR))) ; irqstat = esdhc_read32(&regs->irqstat); /* Reset CMD and DATA portions on error */ - if (irqstat & (CMD_ERR | IRQSTAT_CTOE)) { + if (irqstat & CMD_ERR) { esdhc_write32(&regs->sysctl, esdhc_read32(&regs->sysctl) | SYSCTL_RSTC); while (esdhc_read32(&regs->sysctl) & SYSCTL_RSTC) @@ -363,12 +363,12 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) } } - if (irqstat & CMD_ERR) - return COMM_ERR; - if (irqstat & IRQSTAT_CTOE) return TIMEOUT; + if (irqstat & CMD_ERR) + return COMM_ERR; + /* Workaround for ESDHC errata ENGcm03648 */ if (!data && (cmd->resp_type & MMC_RSP_BUSY)) { int timeout = 2500; diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h index 67d6057..37dbe27 100644 --- a/include/fsl_esdhc.h +++ b/include/fsl_esdhc.h @@ -62,7 +62,8 @@ #define IRQSTAT_TC (0x00000002) #define IRQSTAT_CC (0x00000001) -#define CMD_ERR (IRQSTAT_CIE | IRQSTAT_CEBE | IRQSTAT_CCE) +#define CMD_ERR (IRQSTAT_CIE | IRQSTAT_CEBE | IRQSTAT_CCE | \ + IRQSTAT_CTOE | IRQSTAT_AC12E) #define DATA_ERR (IRQSTAT_DEBE | IRQSTAT_DCE | IRQSTAT_DTOE | \ IRQSTAT_DMAE) #define DATA_COMPLETE (IRQSTAT_TC | IRQSTAT_DINT) -- 1.8.0

5 9

[U-Boot] [PATCH 1/4] blackfin: the sclk MHz in i2c driver should be divided by 1000 other than 1024
by Sonic Zhang 30 Jan '14

30 Jan '14

From: Sonic Zhang <sonic.zhang(a)analog.com> Signed-off-by: Sonic Zhang <sonic.zhang(a)analog.com> --- drivers/i2c/bfin-twi_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/bfin-twi_i2c.c b/drivers/i2c/bfin-twi_i2c.c index b3a04d3..5c37280 100644 --- a/drivers/i2c/bfin-twi_i2c.c +++ b/drivers/i2c/bfin-twi_i2c.c @@ -274,7 +274,7 @@ unsigned int i2c_get_bus_speed(void) */ void i2c_init(int speed, int slaveaddr) { - uint8_t prescale = ((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F; + uint8_t prescale = ((get_sclk() / 1000 / 1000 + 5) / 10) & 0x7F; /* Set TWI internal clock as 10MHz */ twi->control = prescale; -- 1.8.2.3

2 7

[U-Boot] [PATCH v2 1/2] i2c: zynq: Support for 0-length register address
by Michal Simek 30 Jan '14

30 Jan '14

From: Michael Burr <michael.burr(a)logicpd.com> Fixed bug with alen == 0 in 'i2c_write', 'i2c_read' Further minor corrections: - Write 'address' register before 'data' register. - Write 'transfer_size' register before 'address' register. Signed-off-by: Michael Burr <michael.burr(a)logicpd.com> Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- Changes in v2: - Fix incorrect rebase Changes in v1: - Based on original thread from Michael Burr http://lists.denx.de/pipermail/u-boot/2013-October/165060.html - MS rebase on latest&greatest drivers/i2c/zynq_i2c.c | 42 +++++++++++++++++++++++------------------- 1 file changed, 23 insertions(+), 19 deletions(-) diff --git a/drivers/i2c/zynq_i2c.c b/drivers/i2c/zynq_i2c.c index 70a9aea..11ef0f8 100644 --- a/drivers/i2c/zynq_i2c.c +++ b/drivers/i2c/zynq_i2c.c @@ -189,20 +189,22 @@ static int zynq_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr, * Temporarily disable restart (by clearing hold) * It doesn't seem to work. */ - clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_RW | - ZYNQ_I2C_CONTROL_HOLD); + clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD); writel(0xFF, &zynq_i2c->interrupt_status); - while (alen--) - writel(addr >> (8*alen), &zynq_i2c->data); - writel(dev, &zynq_i2c->address); + if (alen) { + clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_RW); + writel(dev, &zynq_i2c->address); + while (alen--) + writel(addr >> (8 * alen), &zynq_i2c->data); - /* Wait for the address to be sent */ - if (!zynq_i2c_wait(ZYNQ_I2C_INTERRUPT_COMP)) { - /* Release the bus */ - clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD); - return -ETIMEDOUT; + /* Wait for the address to be sent */ + if (!zynq_i2c_wait(ZYNQ_I2C_INTERRUPT_COMP)) { + /* Release the bus */ + clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD); + return -ETIMEDOUT; + } + debug("Device acked address\n"); } - debug("Device acked address\n"); setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_CLR_FIFO | ZYNQ_I2C_CONTROL_RW); @@ -247,17 +249,19 @@ static int zynq_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr, ZYNQ_I2C_CONTROL_HOLD); clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_RW); writel(0xFF, &zynq_i2c->interrupt_status); - while (alen--) - writel(addr >> (8*alen), &zynq_i2c->data); - /* Start the tranfer */ writel(dev, &zynq_i2c->address); - if (!zynq_i2c_wait(ZYNQ_I2C_INTERRUPT_COMP)) { - /* Release the bus */ - clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD); - return -ETIMEDOUT; + if (alen) { + while (alen--) + writel(addr >> (8 * alen), &zynq_i2c->data); + /* Start the tranfer */ + if (!zynq_i2c_wait(ZYNQ_I2C_INTERRUPT_COMP)) { + /* Release the bus */ + clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD); + return -ETIMEDOUT; + } + debug("Device acked address\n"); } - debug("Device acked address\n"); while (length--) { writel(*(cur_data++), &zynq_i2c->data); if (readl(&zynq_i2c->transfer_size) == ZYNQ_I2C_FIFO_DEPTH) { -- 1.8.2.3

2 3

[U-Boot] Compilation
by JYOTI DUBEY 30 Jan '14

30 Jan '14

Can anyone inform me the steps for compiling and running the u-boot source code?

1 0

[U-Boot] "make htmldocs" gives error
by Abraham V. 30 Jan '14

30 Jan '14

Hello everyone, (cc Simon Glass) I just tried to make the documentation for uboot with the following command (checked out latest mainline sources); > make htmldocs cc tools/kernel-doc/docproc.c -o tools/kernel-doc/docproc make U_BOOT_VERSION=2014.01-rc1 -C doc/DocBook/ htmldocs make[1]: Entering directory `/home/abraham/SPACE/docs_uboot/doc/DocBook' xmlto html -m /home/abraham/SPACE/docs_uboot/doc/DocBook/stylesheet.xsl --skip-validation -o /home/abraham/SPACE/docs_uboot/doc/DocBook/fs /home/abraham/SPACE/docs_uboot/doc/DocBook/fs.xml && echo '<a HREF="fs/index.html"> fs</a><p>' > /home/abraham/SPACE/docs_uboot/doc/DocBook/fs.html Input file /home/abraham/SPACE/docs_uboot/doc/DocBook/fs.xml not found make[1]: *** [/home/abraham/SPACE/docs_uboot/doc/DocBook/fs.html] Error 1 make[1]: Leaving directory `/home/abraham/SPACE/docs_uboot/doc/DocBook' make: *** [htmldocs] Error 2 > The logs in doc/Docbook/Makefile indicate that it was Simon's commit which is causing this problem (at least, he's the one who added in the fs.xml dependency without committing said file). But even if I remove this from the Makefile; > make htmldocs make U_BOOT_VERSION=2014.01-rc1 -C doc/DocBook/ htmldocs make[1]: Entering directory `/home/abraham/SPACE/docs_uboot/doc/DocBook' /home/abraham/SPACE/docs_uboot/tools/kernel-doc/docproc doc /home/abraham/SPACE/docs_uboot/doc/DocBook/linker_lists.tmpl >/home/abraham/SPACE/docs_uboot/doc/DocBook/linker_lists.xml Error(/home/abraham/SPACE/docs_uboot/include/linker_lists.h:101): cannot understand prototype: '__LINKER_LISTS_H__ ' Error(/home/abraham/SPACE/docs_uboot/include/linker_lists.h:165): cannot understand prototype: '/** * ll_entry_start() - Point to first entry of linker-generated array * @_type: Data type of the entry * @_list: Name of the list in which this entry is placed * * This function returns (_type *) pointer to the very first entry of a * linker-generated array placed into subsection of .u_boot_list section * specified by _list argument. * * Since this macro defines an array start symbol, its leftmost index * must be 2 and its rightmost index must be 1. * * Example: * struct my_sub_cmd *msc = ll_entry_start(struct my_sub_cmd, cmd_sub); ' make[1]: *** [/home/abraham/SPACE/docs_uboot/doc/DocBook/linker_lists.xml] Error 2 make[1]: Leaving directory `/home/abraham/SPACE/docs_uboot/doc/DocBook' make: *** [htmldocs] Error 2 > We can see that there's some issue with parsing the comments in the linker_lists.h header file. I can understand general developer reluctance at updating documentation (I'm lazy about it too), but do we have any way to generate some kind of documentation for u-boot? Even Linux-style man pages will do. Or is my only recourse to just refer all the doc/README.* files one at a time? -Abraham Varricatt

2 1

[U-Boot] [PATCH] powerpc/t104xrdb: Add basic ethernet support
by Priyanka Jain 30 Jan '14

30 Jan '14

This covers only non-L2 switch ethernet interfaces i.e. RGMII and SGMII interface for both -T1040RDB -T1042RDB_PI T1040RDB is configured as serdes protocol 0x66 which can support following interfaces -2 RGMIIS on DTSEC4, DTSEC5 -1 SGMII on DTSEC3 T1042RDB_PI is configured as serdes protocol 0x06 which can support following interfaces -2 RGMIIS on DTSEC4, DTSEC5 Signed-off-by: Poonam Aggrwal <poonam.aggrwal(a)freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain(a)freescale.com> --- board/freescale/t104xrdb/Makefile | 1 + board/freescale/t104xrdb/eth.c | 72 +++++++++++++++++++++++++++++++++++++ include/configs/T1040RDB.h | 9 ++--- include/configs/T1042RDB_PI.h | 5 ++- 4 files changed, 81 insertions(+), 6 deletions(-) create mode 100644 board/freescale/t104xrdb/eth.c diff --git a/board/freescale/t104xrdb/Makefile b/board/freescale/t104xrdb/Makefile index 76c0c94..e51fb7a 100644 --- a/board/freescale/t104xrdb/Makefile +++ b/board/freescale/t104xrdb/Makefile @@ -7,6 +7,7 @@ obj-y += t104xrdb.o obj-y += ddr.o +obj-y += eth.o obj-$(CONFIG_PCI) += pci.o obj-y += law.o obj-y += tlb.o diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c new file mode 100644 index 0000000..448434b --- /dev/null +++ b/board/freescale/t104xrdb/eth.c @@ -0,0 +1,72 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <netdev.h> +#include <asm/immap_85xx.h> +#include <fm_eth.h> +#include <fsl_mdio.h> +#include <malloc.h> +#include <asm/fsl_dtsec.h> + +#include "../common/fman.h" + +int board_eth_init(bd_t *bis) +{ +#ifdef CONFIG_FMAN_ENET + struct memac_mdio_info memac_mdio_info; + unsigned int i; + int phy_addr; + printf("Initializing Fman\n"); + + memac_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR; + memac_mdio_info.name = DEFAULT_FM_MDIO_NAME; + + /* Register the real 1G MDIO bus */ + fm_memac_mdio_init(bis, &memac_mdio_info); + + /* + * Program on board RGMII, SGMII PHY addresses. + */ + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + int idx = i - FM1_DTSEC1; + + switch (fm_info_get_enet_if(i)) { +#ifdef CONFIG_T1040RDB + case PHY_INTERFACE_MODE_SGMII: + /* T1040RDB only supports SGMII on DTSEC3 */ + fm_info_set_phy_address(FM1_DTSEC3, + CONFIG_SYS_SGMII1_PHY_ADDR); +#endif + case PHY_INTERFACE_MODE_RGMII: + if (FM1_DTSEC4 == i) + phy_addr = CONFIG_SYS_RGMII1_PHY_ADDR; + if (FM1_DTSEC5 == i) + phy_addr = CONFIG_SYS_RGMII2_PHY_ADDR; + fm_info_set_phy_address(i, phy_addr); + break; + case PHY_INTERFACE_MODE_QSGMII: + fm_info_set_phy_address(i, 0); + break; + case PHY_INTERFACE_MODE_NONE: + fm_info_set_phy_address(i, 0); + break; + default: + printf("Fman1: DTSEC%u set to unknown interface %i\n", + idx + 1, fm_info_get_enet_if(i)); + fm_info_set_phy_address(i, 0); + break; + } + fm_info_set_mdio(i, + miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME)); + } + + cpu_eth_init(bis); +#endif + + return pci_eth_init(bis); +} diff --git a/include/configs/T1040RDB.h b/include/configs/T1040RDB.h index 8784eac..de2df51 100644 --- a/include/configs/T1040RDB.h +++ b/include/configs/T1040RDB.h @@ -547,13 +547,12 @@ #endif #ifdef CONFIG_FMAN_ENET -#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c -#define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d -#define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e -#define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f +#define CONFIG_SYS_SGMII1_PHY_ADDR 0x03 +#define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 +#define CONFIG_SYS_RGMII2_PHY_ADDR 0x02 #define CONFIG_MII /* MII PHY management */ -#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_ETHPRIME "FM1@DTSEC4" #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ #endif diff --git a/include/configs/T1042RDB_PI.h b/include/configs/T1042RDB_PI.h index cd18de5..c5c9a23 100644 --- a/include/configs/T1042RDB_PI.h +++ b/include/configs/T1042RDB_PI.h @@ -553,8 +553,11 @@ #endif #ifdef CONFIG_FMAN_ENET +#define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 +#define CONFIG_SYS_RGMII2_PHY_ADDR 0x02 + #define CONFIG_MII /* MII PHY management */ -#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_ETHPRIME "FM1@DTSEC4" #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ #endif -- 1.7.4.1

2 1