January 2014 - U-Boot

[U-Boot] [PATCH] powerpc/mpc85xx: Update serdes protocols for T1040
by Prabhakar Kushwaha 03 Feb '14

03 Feb '14

T1040 has only one SerDes block. so update the code accordingly. Also, add support of SerDes Protocol 0x00, 0x06, 0x40, 0x69 0x85, 0xA7 and 0xAA Signed-off-by: Arpit Goel <B44344(a)freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal(a)freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain(a)freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar(a)freescale.com> --- arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c | 2 + arch/powerpc/cpu/mpc85xx/t1040_serdes.c | 63 ++++++++++-------------- arch/powerpc/include/asm/fsl_serdes.h | 8 +-- 3 files changed, 30 insertions(+), 43 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c index 25db899..70e09ea 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c @@ -75,6 +75,8 @@ static const char *serdes_prtcl_str[] = { [XFI_FM2_MAC9] = "XFI_FM2_MAC9", [XFI_FM2_MAC10] = "XFI_FM2_MAC10", [INTERLAKEN] = "INTERLAKEN", + [QSGMII_SW1_A] = "QSGMII_SW1_A", + [QSGMII_SW1_B] = "QSGMII_SW1_B", }; #endif diff --git a/arch/powerpc/cpu/mpc85xx/t1040_serdes.c b/arch/powerpc/cpu/mpc85xx/t1040_serdes.c index 94814ac..d86bb27 100644 --- a/arch/powerpc/cpu/mpc85xx/t1040_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/t1040_serdes.c @@ -8,68 +8,59 @@ #include <asm/fsl_serdes.h> #include <asm/processor.h> #include <asm/io.h> -#include "fsl_corenet2_serdes.h" -static u8 serdes_cfg_tbl[MAX_SERDES][0xC4][SRDS_MAX_LANES] = { - { /* SerDes 1 */ - [0x69] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, - PCIE2, PCIE3, SGMII_FM1_DTSEC4, SATA1}, + +static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = { + [0x00] = {PCIE1, PCIE1, PCIE1, PCIE1, + PCIE2, PCIE2, PCIE2, PCIE2}, + [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, + PCIE2, PCIE3, PCIE4, SATA1}, + [0x08] = {PCIE1, PCIE1, PCIE1, PCIE1, + PCIE2, PCIE3, SATA2, SATA1}, + [0x40] = {PCIE1, PCIE1, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE2, PCIE2, PCIE2, PCIE2}, + [0x60] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, + PCIE2, PCIE2, PCIE2, PCIE2}, [0x66] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, PCIE2, PCIE3, PCIE4, SATA1}, [0x67] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5}, - [0x60] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, - PCIE2, PCIE2, PCIE2, PCIE2}, - [0x8D] = {PCIE1, SGMII_SW1_DTSEC3, SGMII_SW1_DTSEC1, SGMII_SW1_DTSEC2, - PCIE2, SGMII_SW1_DTSEC6, SGMII_SW1_DTSEC4, SGMII_SW1_DTSEC5}, - [0x89] = {PCIE1, SGMII_SW1_DTSEC3, SGMII_SW1_DTSEC1, SGMII_SW1_DTSEC2, - PCIE2, PCIE3, SGMII_SW1_DTSEC4, SATA1}, + [0x69] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, + PCIE2, PCIE3, SGMII_FM1_DTSEC4, SATA1}, [0x86] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE2, PCIE3, PCIE4, SATA1}, + [0x85] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, [0x87] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5}, - [0xA7] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5}, - [0xAA] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - PCIE2, PCIE3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, - [0x40] = {PCIE1, PCIE1, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - PCIE2, PCIE2, PCIE2, PCIE2}, - [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, - PCIE2, PCIE3, PCIE4, SATA1}, - [0x08] = {PCIE1, PCIE1, PCIE1, PCIE1, - PCIE2, PCIE3, SATA2, SATA1}, + [0x89] = {PCIE1, QSGMII_SW1_A, QSGMII_SW1_A, QSGMII_SW1_A, + PCIE2, PCIE3, QSGMII_SW1_B, SATA1}, + [0x8D] = {PCIE1, QSGMII_SW1_A, QSGMII_SW1_A, QSGMII_SW1_A, + PCIE2, QSGMII_SW1_B, QSGMII_SW1_B, QSGMII_SW1_B}, [0x8F] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, AURORA, NONE, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, - [0x85] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, [0xA5] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, - [0x00] = {PCIE1, PCIE1, PCIE1, PCIE1, - PCIE2, PCIE2, PCIE2, PCIE2}, - }, - { - }, - { - }, - { - }, + [0xA7] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5}, + [0xAA] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE2, PCIE3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, }; - enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) { - return serdes_cfg_tbl[serdes][cfg][lane]; + return serdes_cfg_tbl[cfg][lane]; } int is_serdes_prtcl_valid(int serdes, u32 prtcl) { int i; - if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl[serdes])) + if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl)) return 0; for (i = 0; i < SRDS_MAX_LANES; i++) { - if (serdes_cfg_tbl[serdes][prtcl][i] != NONE) + if (serdes_cfg_tbl[prtcl][i] != NONE) return 1; } diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index 404ded4..f60cb0a 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -69,13 +69,7 @@ enum srds_prtcl { XFI_FM2_MAC9, XFI_FM2_MAC10, INTERLAKEN, - SGMII_SW1_DTSEC1, /* SW indicates on L2 switch */ - SGMII_SW1_DTSEC2, - SGMII_SW1_DTSEC3, - SGMII_SW1_DTSEC4, - SGMII_SW1_DTSEC5, - SGMII_SW1_DTSEC6, - QSGMII_SW1_A, /* SW indicates on L2 swtich */ + QSGMII_SW1_A, /* Indicates ports on L2 Switch */ QSGMII_SW1_B, }; -- 1.7.9.5

2 1

[U-Boot] [PATCH] powerpc/mpc85xx:Fix README to show correct flash memory map
by Prabhakar Kushwaha 03 Feb '14

03 Feb '14

Due to increased size of u-boot, FMAN ucode start address has been shifted by 256KB causing a overlap with rootfs start address. Update rootfs start address to reflect correct memory map. Also fix minor typo in README Signed-off-by: Prabhakar Kushwaha <prabhakar(a)freescale.com> --- board/freescale/t1040qds/README | 6 +++--- board/freescale/t104xrdb/README | 6 +++--- doc/README.b4860qds | 4 ++-- 3 files changed, 8 insertions(+), 8 deletions(-) diff --git a/board/freescale/t1040qds/README b/board/freescale/t1040qds/README index 6d380ae..8160ca0 100644 --- a/board/freescale/t1040qds/README +++ b/board/freescale/t1040qds/README @@ -121,14 +121,14 @@ NOR Flash memory Map on T1040QDS 0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB 0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB -0xED300000 0xEFF3FFFF rootfs (alt bank) 44MB + 256KB -0xEC800000 0xEC8FFFF Hardware device tree (alt bank) 1MB +0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB +0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB 0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB 0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB -0xE9300000 0xEBF3FFFF rootfs (current bank) 44MB + 256KB +0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB 0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB 0xE8000000 0xE801FFFF RCW (current bank) 128KB diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README index 11e03bd..1da52bb 100644 --- a/board/freescale/t104xrdb/README +++ b/board/freescale/t104xrdb/README @@ -164,14 +164,14 @@ NOR Flash memory Map 0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB 0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB -0xED300000 0xEFF3FFFF rootfs (alt bank) 44MB + 256KB -0xEC800000 0xEC8FFFF Hardware device tree (alt bank) 1MB +0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB +0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB 0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB 0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB -0xE9300000 0xEBF3FFFF rootfs (current bank) 44MB + 256KB +0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB 0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB 0xE8000000 0xE801FFFF RCW (current bank) 128KB diff --git a/doc/README.b4860qds b/doc/README.b4860qds index f8a79db..3da77d9 100644 --- a/doc/README.b4860qds +++ b/doc/README.b4860qds @@ -230,14 +230,14 @@ NOR Flash memory Map on B4860 and B4420QDS 0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB 0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB -0xEF300000 0xEFF3FFFF rootfs (alternate bank) 12MB + 256KB +0xEF300000 0xEFEFFFFF rootfs (alternate bank) 12MB 0xEE800000 0xEE8FFFFF device tree (alternate bank) 1MB 0xEE020000 0xEE6FFFFF Linux.uImage (alternate bank) 6MB+896KB 0xEE000000 0xEE01FFFF RCW (alternate bank) 128KB 0xEDF40000 0xEDFFFFFF u-boot (alternate bank) 768KB 0xEDF20000 0xEDF3FFFF u-boot env (alternate bank) 128KB 0xEDF00000 0xEDF1FFFF FMAN ucode (alternate bank) 128KB -0xED300000 0xEDF3FFFF rootfs (current bank) 12MB+256MB +0xED300000 0xEDEFFFFF rootfs (current bank) 12MB 0xEC800000 0xEC8FFFFF device tree (current bank) 1MB 0xEC020000 0xEC6FFFFF Linux.uImage (current bank) 6MB+896KB 0xEC000000 0xEC01FFFF RCW (current bank) 128KB -- 1.7.9.5

2 1

[U-Boot] [PATCH] driver/fsl_pci:Update print to display PCIe generation
by Prabhakar Kushwaha 03 Feb '14

03 Feb '14

Current print only display width of PCIe device. Add print to display PCIe generation supported by the device. Signed-off-by: Prabhakar Kushwaha <prabhakar(a)freescale.com> --- drivers/pci/fsl_pci_init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 2085cd6..6317fb1 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -510,8 +510,8 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) /* Print the negotiated PCIe link width */ pci_hose_read_config_word(hose, dev, pci_lsr, &temp16); - printf("x%d, regs @ 0x%lx\n", (temp16 & 0x3f0 ) >> 4, - pci_info->regs); + printf("x%d gen%d, regs @ 0x%lx\n", (temp16 & 0x3f0) >> 4, + (temp16 & 0xf), pci_info->regs); hose->current_busno++; /* Start scan with secondary */ pciauto_prescan_setup_bridge(hose, dev, hose->current_busno); -- 1.7.9.5

2 1

[U-Boot] [PATCH][v0] powerpc/mpc85xx: Update LIODNs for T1040
by Poonam Aggrwal 03 Feb '14

03 Feb '14

Removed LIODNs for RMAN, RIO, 10G. T1040 has 10 QMAN portals so assigned LIODNs accordingly. Signed-off-by: Poonam Aggrwal <poonam.aggrwal(a)freescale.com> --- arch/powerpc/cpu/mpc85xx/t1040_ids.c | 36 ---------------------------------- 1 files changed, 0 insertions(+), 36 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/t1040_ids.c b/arch/powerpc/cpu/mpc85xx/t1040_ids.c index 32075ce..68160a9 100644 --- a/arch/powerpc/cpu/mpc85xx/t1040_ids.c +++ b/arch/powerpc/cpu/mpc85xx/t1040_ids.c @@ -21,21 +21,6 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { SET_QP_INFO(8, 34, 1, 3), SET_QP_INFO(9, 35, 1, 0), SET_QP_INFO(10, 36, 1, 0), - SET_QP_INFO(11, 37, 1, 1), - SET_QP_INFO(12, 38, 1, 1), - SET_QP_INFO(13, 39, 1, 2), - SET_QP_INFO(14, 40, 1, 2), - SET_QP_INFO(15, 41, 1, 3), - SET_QP_INFO(16, 42, 1, 3), - SET_QP_INFO(17, 43, 1, 0), - SET_QP_INFO(18, 44, 1, 0), - SET_QP_INFO(19, 45, 1, 1), - SET_QP_INFO(20, 46, 1, 1), - SET_QP_INFO(21, 47, 1, 2), - SET_QP_INFO(22, 48, 1, 2), - SET_QP_INFO(23, 49, 1, 3), - SET_QP_INFO(24, 50, 1, 3), - SET_QP_INFO(25, 51, 1, 0), }; #endif @@ -60,11 +45,6 @@ struct liodn_id_table liodn_tbl[] = { SET_DMA_LIODN(1, 147), SET_DMA_LIODN(2, 227), - SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0), - SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0), - SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0), - SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0), - /* SET_NEXUS_LIODN(557), -- not yet implemented */ }; int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); @@ -77,8 +57,6 @@ struct liodn_id_table fman1_liodn_tbl[] = { SET_FMAN_RX_1G_LIODN(1, 3, 91), SET_FMAN_RX_1G_LIODN(1, 4, 92), SET_FMAN_RX_1G_LIODN(1, 5, 93), - SET_FMAN_RX_10G_LIODN(1, 0, 94), - SET_FMAN_RX_10G_LIODN(1, 1, 95), }; int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); #endif @@ -97,23 +75,9 @@ struct liodn_id_table sec_liodn_tbl[] = { }; int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); -#ifdef CONFIG_SYS_DPAA_RMAN -struct liodn_id_table rman_liodn_tbl[] = { - /* Set RMan block 0-3 liodn offset */ - SET_RMAN_LIODN(0, 678), - SET_RMAN_LIODN(1, 679), - SET_RMAN_LIODN(2, 680), - SET_RMAN_LIODN(3, 681), -}; -int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); -#endif - struct liodn_id_table liodn_bases[] = { [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558), #ifdef CONFIG_SYS_DPAA_FMAN [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973), #endif -#ifdef CONFIG_SYS_DPAA_RMAN - [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922), -#endif }; -- 1.7.4.1

2 1

Re: [U-Boot] [PATCH 2/3] powerpc/p1010rdb: SECURE BOOT- enable workaround for IFC errata A003399
by Scott Wood 03 Feb '14

03 Feb '14

On Sun, 2014-01-26 at 23:27 -0600, Bansal Aneesh-B39320 wrote: > > -----Original Message----- > > From: Wood Scott-B07421 > > Sent: Tuesday, January 21, 2014 3:36 AM > > To: Bansal Aneesh-B39320 > > Cc: u-boot(a)lists.denx.de; Sun York-R58495 > > Subject: Re: [PATCH 2/3] powerpc/p1010rdb: SECURE BOOT- enable workaround > > for IFC errata A003399 > > > > On Mon, 2014-01-20 at 14:57 +0530, Aneesh Bansal wrote: > > > The workaround for IFC errata A003399 was not enabled in case of > > > secure boot. So, secure boot from NOR was not working. > > > > > > Signed-off-by: Aneesh Bansal <aneesh.bansal(a)freescale.com> > > > --- > > > include/configs/P1010RDB.h | 3 +-- > > > 1 file changed, 1 insertion(+), 2 deletions(-) > > > > > > diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h > > > index c21cf07..b0e51fb 100644 > > > --- a/include/configs/P1010RDB.h > > > +++ b/include/configs/P1010RDB.h > > > @@ -455,8 +455,7 @@ extern unsigned long get_sdram_size(void); #endif > > > > > > #ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399 > > > -#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT)\ > > > - && !defined(CONFIG_SECURE_BOOT) > > > +#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) > > > #define CONFIG_A003399_NOR_WORKAROUND #endif #endif > > > > Why do you need the workaround? Doesn't secure boot involve the bootrom > > loading U-Boot into SRAM, rather than execute-in-place from NOR? > > > > -Scott > > > The Boot ROM code does not copy the U-boot from NOR into SRAM. In case of secure > boot from NOR, it is executed as an execute-in-place memory and so this workaround > is required. That doesn't sound very secure. -Scott

2 1

[U-Boot] [PATCH] config: trats: trats2: extend dfu_alt_info by env update settings
by Przemyslaw Marczak 03 Feb '14

03 Feb '14

This change allows updating environment stored on MMC by dfu or thor. New setting: - "params.bin mmc 0x38 0x8" File params.bin can be generated by: tools/mkenvimage. e.g. ./mkenvimage -s 4096 -o params.bin <env_text_file> Every new env variable in text file should start with a new line. Sample env text file: - board/samsung/common/dfu_sample_env.txt Requirements: - file name: "params.bin" - file size: 4096 Bytes - the same as CONFIG_ENV_SIZE. Other size will cause CRC miscalculation at boot. Signed-off-by: Przemyslaw Marczak <p.marczak(a)samsung.com> CC: Piotr Wilczek <p.wilczek(a)samsung.com> CC: Lukasz Majewski <l.majewski(a)samsung.com> --- board/samsung/common/dfu_sample_env.txt | 9 +++++++++ include/configs/trats.h | 3 ++- include/configs/trats2.h | 3 ++- 3 files changed, 13 insertions(+), 2 deletions(-) create mode 100644 board/samsung/common/dfu_sample_env.txt diff --git a/board/samsung/common/dfu_sample_env.txt b/board/samsung/common/dfu_sample_env.txt new file mode 100644 index 0000000..d6ee8a2 --- /dev/null +++ b/board/samsung/common/dfu_sample_env.txt @@ -0,0 +1,9 @@ +mmcboot=setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} ${rootfstype} rootwait ${console}; run loaduimage; bootm 0x40007FC0 +rootfstype=ext4 +loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage +mmcdev=0 +mmcbootpart=2 +mmcrootpart=5 +console=console=ttySAC2,115200n8 +bootcmd=run mmcboot +dfu_alt_info=u-boot mmc 80 800;params.bin mmc 0x38 0x8;uImage ext4 0 2 diff --git a/include/configs/trats.h b/include/configs/trats.h index fdd8b46..d09f7c7 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -147,7 +147,8 @@ ""PARTS_BOOT" part 0 2;" \ ""PARTS_ROOT" part 0 5;" \ ""PARTS_DATA" part 0 6;" \ - ""PARTS_UMS" part 0 7\0" + ""PARTS_UMS" part 0 7;" \ + "params.bin mmc 0x38 0x8\0" #define CONFIG_ENV_OVERWRITE #define CONFIG_SYS_CONSOLE_INFO_QUIET diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 83633b0..31c52f1 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -178,7 +178,8 @@ ""PARTS_BOOT" part 0 2;" \ ""PARTS_ROOT" part 0 5;" \ ""PARTS_DATA" part 0 6;" \ - ""PARTS_UMS" part 0 7\0" + ""PARTS_UMS" part 0 7;" \ + "params.bin mmc 0x38 0x8\0" #define CONFIG_EXTRA_ENV_SETTINGS \ "bootk=" \ -- 1.7.9.5

4 4

[U-Boot] [PATCH 00/10] Introduce Samsung misc file and LCD menu.
by Przemyslaw Marczak 03 Feb '14

03 Feb '14

This patch set includes changes required to: - properly use of all gpios - introduce common file for Samsung misc code - keys support (PWR, VOL:UP,DOWN) - console support on LCD - 16bpp logo support - introduce LCD menu on Samsung devices Przemyslaw Marczak (10): s5p: gpio: change gpio coding method for s5p gpio. trats2: Code cleanup. samsung: common: Add misc file and common function misc_init_r(). samsung: misc: move display logo function to misc.c file. lib: tizen: add Tizen 16bpp logo support. video: exynos: fimd: always use 16bpp display mode. samsung: misc: Add LCD download menu. Trats: add LCD download menu support trats2: add LCD download menu support universal: add LCD download menu support arch/arm/include/asm/arch-exynos/gpio.h | 169 +- arch/arm/include/asm/arch-s5pc1xx/gpio.h | 47 +- board/samsung/common/Makefile | 1 + board/samsung/common/keys.h | 78 + board/samsung/common/misc.c | 409 ++ board/samsung/trats/trats.c | 5 +- board/samsung/trats2/trats2.c | 25 +- board/samsung/universal_c210/universal.c | 6 +- drivers/gpio/s5p_gpio.c | 15 +- drivers/power/battery/bat_trats2.c | 2 +- drivers/video/exynos_fb.c | 28 - drivers/video/exynos_fimd.c | 10 +- include/configs/s5p_goni.h | 4 +- include/configs/s5pc210_universal.h | 27 +- include/configs/trats.h | 23 +- include/configs/trats2.h | 29 +- lib/tizen/tizen.c | 16 +- lib/tizen/tizen_hd_logo_16bpp.h | 7518 ++++++++++++++++++++++++++++++ 18 files changed, 8190 insertions(+), 222 deletions(-) create mode 100644 board/samsung/common/keys.h create mode 100644 board/samsung/common/misc.c create mode 100644 lib/tizen/tizen_hd_logo_16bpp.h -- 1.7.9.5

11 140

[U-Boot] [PATCH v2 1/2] QE/FMAN: modify CONFIG_SYS_QE_FMAN_FW_ADDR to CONFIG_SYS_FMAN_FW_ADDR and CONFIG_SYS_QE_FW_ADDR
by Zhao Qiang 03 Feb '14

03 Feb '14

CONFIG_SYS_QE_FMAN_FW_ADDR is used to both Fman and QE for microcode address. Now using CONFIG_SYS_FMAN_FW_ADDR for Fman microcode address, and CONFIG_SYS_QE_FW_ADDR for QE microcode address. Signed-off-by: Zhao Qiang <B45475(a)freescale.com> --- README | 9 +++++++-- arch/powerpc/cpu/mpc85xx/cpu_init.c | 2 +- drivers/net/fm/fm.c | 12 ++++++------ drivers/qe/qe.c | 2 +- include/configs/B4860QDS.h | 10 +++++----- include/configs/MPC8569MDS.h | 2 +- include/configs/P1023RDB.h | 2 +- include/configs/P1023RDS.h | 4 ++-- include/configs/P2041RDB.h | 10 +++++----- include/configs/T1040QDS.h | 8 ++++---- include/configs/T1040RDB.h | 8 ++++---- include/configs/T1042RDB_PI.h | 8 ++++---- include/configs/T2080QDS.h | 10 +++++----- include/configs/T4240EMU.h | 2 +- include/configs/T4240QDS.h | 10 +++++----- include/configs/corenet_ds.h | 10 +++++----- include/configs/km/km8309-common.h | 2 +- include/configs/km/kmp204x-common.h | 2 +- include/configs/p1_p2_rdb_pc.h | 2 +- include/configs/p1_twr.h | 2 +- 20 files changed, 61 insertions(+), 56 deletions(-) diff --git a/README b/README index 176de61..b2b2d73 100644 --- a/README +++ b/README @@ -4445,8 +4445,13 @@ This firmware often needs to be loaded during U-Boot booting, so macros are used to identify the storage device (NOR flash, SPI, etc) and the address within that device. -- CONFIG_SYS_QE_FMAN_FW_ADDR - The address in the storage device where the firmware is located. The +- CONFIG_SYS_FMAN_FW_ADDR + The address in the storage device where the FMAN microcode is located. The + meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro + is also specified. + +- CONFIG_SYS_QE_FW_ADDR + The address in the storage device where the QE microcode is located. The meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro is also specified. diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index b31efb7..ec6eefb 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -743,7 +743,7 @@ void cpu_secondary_init_r(void) /* load QE firmware from NAND flash to DDR first */ ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FMAN_FW_IN_NAND, - &fw_length, (u_char *)CONFIG_SYS_QE_FMAN_FW_ADDR); + &fw_length, (u_char *)CONFIG_SYS_QE_FW_ADDR); if (ret && ret == -EUCLEAN) { printf ("NAND read for QE firmware at offset %x failed %d\n", diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c index bca20b3..400e9dd 100644 --- a/drivers/net/fm/fm.c +++ b/drivers/net/fm/fm.c @@ -350,16 +350,16 @@ int fm_init_common(int index, struct ccsr_fman *reg) { int rc; #if defined(CONFIG_SYS_QE_FMAN_FW_IN_NOR) - void *addr = (void *)CONFIG_SYS_QE_FMAN_FW_ADDR; + void *addr = (void *)CONFIG_SYS_FMAN_FW_ADDR; #elif defined(CONFIG_SYS_QE_FMAN_FW_IN_NAND) size_t fw_length = CONFIG_SYS_QE_FMAN_FW_LENGTH; void *addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH); - rc = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FMAN_FW_ADDR, + rc = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_FMAN_FW_ADDR, &fw_length, (u_char *)addr); if (rc == -EUCLEAN) { printf("NAND read of FMAN firmware at offset 0x%x failed %d\n", - CONFIG_SYS_QE_FMAN_FW_ADDR, rc); + CONFIG_SYS_FMAN_FW_ADDR, rc); } #elif defined(CONFIG_SYS_QE_FW_IN_SPIFLASH) struct spi_flash *ucode_flash; @@ -371,7 +371,7 @@ int fm_init_common(int index, struct ccsr_fman *reg) if (!ucode_flash) printf("SF: probe for ucode failed\n"); else { - ret = spi_flash_read(ucode_flash, CONFIG_SYS_QE_FMAN_FW_ADDR, + ret = spi_flash_read(ucode_flash, CONFIG_SYS_FMAN_FW_ADDR, CONFIG_SYS_QE_FMAN_FW_LENGTH, addr); if (ret) printf("SF: read for ucode failed\n"); @@ -381,7 +381,7 @@ int fm_init_common(int index, struct ccsr_fman *reg) int dev = CONFIG_SYS_MMC_ENV_DEV; void *addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH); u32 cnt = CONFIG_SYS_QE_FMAN_FW_LENGTH / 512; - u32 blk = CONFIG_SYS_QE_FMAN_FW_ADDR / 512; + u32 blk = CONFIG_SYS_FMAN_FW_ADDR / 512; struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV); if (!mmc) @@ -395,7 +395,7 @@ int fm_init_common(int index, struct ccsr_fman *reg) flush_cache((ulong)addr, cnt * 512); } #elif defined(CONFIG_SYS_QE_FMAN_FW_IN_REMOTE) - void *addr = (void *)CONFIG_SYS_QE_FMAN_FW_ADDR; + void *addr = (void *)CONFIG_SYS_FMAN_FW_ADDR; #else void *addr = NULL; #endif diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index b5ddc4b..b1da75e 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -165,7 +165,7 @@ void qe_init(uint qe_base) /* * Upload microcode to IRAM for those SOCs which do not have ROM in QE. */ - qe_upload_firmware((const void *)CONFIG_SYS_QE_FMAN_FW_ADDR); + qe_upload_firmware((const void *)CONFIG_SYS_QE_FW_ADDR); /* enable the microcode in IRAM */ out_be32(&qe_immr->iram.iready,QE_IRAM_READY); diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 39c0b6d..d4d606f 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -597,7 +597,7 @@ unsigned long get_board_ddr_clk(void); * env, so we got 0x110000. */ #define CONFIG_SYS_QE_FW_IN_SPIFLASH -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x110000 #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is @@ -605,10 +605,10 @@ unsigned long get_board_ddr_clk(void); * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1130) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) /* * Slave has no ucode locally, it can fetch this from remote. When implementing @@ -618,10 +618,10 @@ unsigned long get_board_ddr_clk(void); * master LAW->the ucode address in master's memory space. */ #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 +#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 +#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index d877e8b..5208069 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -494,7 +494,7 @@ extern unsigned long get_clock_freq(void); /* QE microcode/firmware address */ #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xfff00000 +#define CONFIG_SYS_QE_FW_ADDR 0xfff00000 /* * BOOTP options diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index 78a0aa2..7c83362 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -361,7 +361,7 @@ extern unsigned long get_clock_freq(void); /* Default address of microcode for the Linux Fman driver */ /* QE microcode/firmware address */ #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 +#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h index d2aaf98..5d015e0 100644 --- a/include/configs/P1023RDS.h +++ b/include/configs/P1023RDS.h @@ -502,10 +502,10 @@ extern unsigned long get_clock_freq(void); /* Default address of microcode for the Linux Fman driver */ /* QE microcode/firmware address */ #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 +#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x1f00000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x1f00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 6934c61..a02e438 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -508,7 +508,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); * env, so we got 0x110000. */ #define CONFIG_SYS_QE_FW_IN_SPIFLASH -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x110000 #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is @@ -516,10 +516,10 @@ unsigned long get_board_sys_clk(unsigned long dummy); * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) +#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) /* * Slave has no ucode locally, it can fetch this from remote. When implementing @@ -529,10 +529,10 @@ unsigned long get_board_sys_clk(unsigned long dummy); * master LAW->the ucode address in master's memory space. */ #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 +#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 +#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 91b511b..0282922 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -579,7 +579,7 @@ unsigned long get_board_ddr_clk(void); * env, so we got 0x110000. */ #define CONFIG_SYS_QE_FW_IN_SPIFLASH -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x110000 #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is @@ -587,13 +587,13 @@ unsigned long get_board_ddr_clk(void); * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) +#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 +#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/T1040RDB.h b/include/configs/T1040RDB.h index 65b4b26..1ca1a1a 100644 --- a/include/configs/T1040RDB.h +++ b/include/configs/T1040RDB.h @@ -517,7 +517,7 @@ * env, so we got 0x110000. */ #define CONFIG_SYS_QE_FW_IN_SPIFLASH -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x110000 #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is @@ -525,13 +525,13 @@ * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) +#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_FMAN_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 +#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/T1042RDB_PI.h b/include/configs/T1042RDB_PI.h index 104bb92..5b248e4 100644 --- a/include/configs/T1042RDB_PI.h +++ b/include/configs/T1042RDB_PI.h @@ -525,7 +525,7 @@ * env, so we got 0x110000. */ #define CONFIG_SYS_QE_FW_IN_SPIFLASH -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x110000 #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is @@ -533,13 +533,13 @@ * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) +#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_FMAN_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 +#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/T2080QDS.h b/include/configs/T2080QDS.h index d6d1f93..26828e5 100644 --- a/include/configs/T2080QDS.h +++ b/include/configs/T2080QDS.h @@ -540,7 +540,7 @@ unsigned long get_board_ddr_clk(void); * env, so we got 0x110000. */ #define CONFIG_SYS_QE_FW_IN_SPIFLASH -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x110000 #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is @@ -548,10 +548,10 @@ unsigned long get_board_ddr_clk(void); * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) +#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) /* * Slave has no ucode locally, it can fetch this from remote. When implementing @@ -561,10 +561,10 @@ unsigned long get_board_ddr_clk(void); * master LAW->the ucode address in master's memory space. */ #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 +#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 +#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/T4240EMU.h b/include/configs/T4240EMU.h index c81c457..ad5a9a6 100644 --- a/include/configs/T4240EMU.h +++ b/include/configs/T4240EMU.h @@ -98,7 +98,7 @@ #define CONFIG_SYS_INTERLAKEN #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 +#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index 0d43c27..d88b3b5 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -375,7 +375,7 @@ unsigned long get_board_ddr_clk(void); * env, so we got 0x110000. */ #define CONFIG_SYS_QE_FW_IN_SPIFLASH -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x110000 #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is @@ -383,10 +383,10 @@ unsigned long get_board_ddr_clk(void); * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) +#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) /* * Slave has no ucode locally, it can fetch this from remote. When implementing @@ -396,10 +396,10 @@ unsigned long get_board_ddr_clk(void); * master LAW->the ucode address in master's memory space. */ #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 +#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 +#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index fa748f7..be00871 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -514,7 +514,7 @@ * env, so we got 0x110000. */ #define CONFIG_SYS_QE_FW_IN_SPIFLASH -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x110000 #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is @@ -522,10 +522,10 @@ * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) +#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) /* * Slave has no ucode locally, it can fetch this from remote. When implementing @@ -535,10 +535,10 @@ * master LAW->the ucode address in master's memory space. */ #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 +#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 +#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/km/km8309-common.h b/include/configs/km/km8309-common.h index 47355ab..d27911f 100644 --- a/include/configs/km/km8309-common.h +++ b/include/configs/km/km8309-common.h @@ -28,7 +28,7 @@ /* QE microcode/firmware address */ #define CONFIG_SYS_QE_FMAN_FW_IN_NOR /* at end of uboot partition, before env */ -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xF00B0000 +#define CONFIG_SYS_QE_FW_ADDR 0xF00B0000 /* * System IO Config diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 0463fcb..fbe9940 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -334,7 +334,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); * ucode is stored after env, so we got 0x120000. */ #define CONFIG_SYS_QE_FW_IN_SPIFLASH -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x120000 +#define CONFIG_SYS_QE_FW_ADDR 0x120000 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 95e23ac..93a0aa9 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -769,7 +769,7 @@ #ifdef CONFIG_QE /* QE microcode/firmware address */ #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xefec0000 +#define CONFIG_SYS_QE_FW_ADDR 0xefec0000 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #endif /* CONFIG_QE */ diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h index a7fe90f..f6b76b8 100644 --- a/include/configs/p1_twr.h +++ b/include/configs/p1_twr.h @@ -352,7 +352,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #ifdef CONFIG_QE /* QE microcode/firmware address */ #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xefec0000 +#define CONFIG_SYS_QE_FW_ADDR 0xefec0000 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #endif /* CONFIG_QE */ -- 1.8.5

2 2

[U-Boot] [PATCH 1/2] exynos5250: usb: Fix VBus gpio numbers for ehci and xhci controllers
by Vivek Gautam 03 Feb '14

03 Feb '14

The gpio_*() apis require the exact gpio line number to deduce the gpio bank and the gpio pin addresses. So fix the gpio number for VBUS used for EHCI ports as well as XHCI ports on exynos5250 boards. Signed-off-by: Vivek Gautam <gautam.vivek(a)samsung.com> Cc: Julius Werner <jwerner(a)chromium.org> Cc: Minkyu Kang <mk7.kang(a)samsung.com> Cc: Marek Vasut <marex(a)denx.de> --- board/samsung/dts/exynos5250-smdk5250.dts | 2 +- board/samsung/dts/exynos5250-snow.dts | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/board/samsung/dts/exynos5250-smdk5250.dts b/board/samsung/dts/exynos5250-smdk5250.dts index c4ed346..9020382 100644 --- a/board/samsung/dts/exynos5250-smdk5250.dts +++ b/board/samsung/dts/exynos5250-smdk5250.dts @@ -146,6 +146,6 @@ }; ehci@12110000 { - samsung,vbus-gpio = <&gpio 0xbe 0>; /* X26 */ + samsung,vbus-gpio = <&gpio 0x316 0>; /* X26 */ }; }; diff --git a/board/samsung/dts/exynos5250-snow.dts b/board/samsung/dts/exynos5250-snow.dts index 091cdb9..9b48a0c 100644 --- a/board/samsung/dts/exynos5250-snow.dts +++ b/board/samsung/dts/exynos5250-snow.dts @@ -110,11 +110,11 @@ }; ehci@12110000 { - samsung,vbus-gpio = <&gpio 0xb1 0>; /* X11 */ + samsung,vbus-gpio = <&gpio 0x309 0>; /* X11 */ }; xhci@12000000 { - samsung,vbus-gpio = <&gpio 0xbf 0>; /* X27 */ + samsung,vbus-gpio = <&gpio 0x317 0>; /* X27 */ }; tmu@10060000 { -- 1.7.10.4

4 9

[U-Boot] [PATCH] omap3: Derive config for Beagleboard-XM sans NAND support
by Sanjeev Premi 01 Feb '14

01 Feb '14

Beagleboard XM doesn't have a NAND chip. Let the configuration reflect so. Signed-off-by: Sanjeev Premi <spremi(a)ymail.com> Cc: Tom Rini <trini(a)ti.com> --- Patch was created and tested against: 183acb70: Prepare v2013.10 Forward ported to latest master for submission. Difference in binary sizes: MLO u-boot.img Before 47932 337784 After 44676 277700 boards.cfg | 1 + include/configs/omap3_beagle.h | 23 +++++++++++++++++++++-- 2 files changed, 22 insertions(+), 2 deletions(-) diff --git a/boards.cfg b/boards.cfg index c602a16..3a6fb87 100644 --- a/boards.cfg +++ b/boards.cfg @@ -332,6 +332,7 @@ Active arm armv7 omap3 technexion twister Active arm armv7 omap3 teejet mt_ventoux mt_ventoux - Stefano Babic <sbabic(a)denx.de> Active arm armv7 omap3 ti am3517crane am3517_crane - Nagendra T S <nagendra(a)mistralsolutions.com> Active arm armv7 omap3 ti beagle omap3_beagle - Tom Rini <trini(a)ti.com> +Active arm armv7 omap3 ti beagle omap3_beagle_xm omap3_beagle:BEAGLE_XM Tom Rini <trini(a)ti.com> Active arm armv7 omap3 ti evm omap3_evm - Tom Rini <trini(a)ti.com> Active arm armv7 omap3 ti evm omap3_evm_quick_mmc - - Active arm armv7 omap3 ti evm omap3_evm_quick_nand - - diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 3acb854..51f9cfd 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -129,21 +129,31 @@ #define CONFIG_CMD_ASKENV +#ifdef CONFIG_BEAGLE_XM +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#else +#define CONFIG_ENV_IS_IN_NAND +#endif /* CONFIG_BEAGLE_XM */ + #define CONFIG_CMD_CACHE #define CONFIG_CMD_EXT2 /* EXT2 Support */ #define CONFIG_CMD_FAT /* FAT support */ #define CONFIG_CMD_FS_GENERIC /* Generic FS support */ + +#ifndef CONFIG_BEAGLE_XM #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define MTDIDS_DEFAULT "nand0=nand" #define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ "1920k(u-boot),128k(u-boot-env),"\ "4m(kernel),-(fs)" +#define CONFIG_CMD_NAND /* NAND support */ +#endif /* CONFIG_BEAGLE_XM */ #define CONFIG_CMD_I2C /* I2C serial bus support */ #define CONFIG_CMD_MMC /* MMC support */ #define CONFIG_USB_STORAGE /* USB storage support */ -#define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_LED /* LED support */ #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #define CONFIG_CMD_NFS /* NFS support */ @@ -173,6 +183,7 @@ /* * Board NAND Info. */ +#ifndef CONFIG_BEAGLE_XM #define CONFIG_SYS_NAND_QUIET_TEST 1 #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ @@ -184,6 +195,7 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ +#endif /* CONFIG_BEAGLE_XM */ /* Environment information */ #define CONFIG_BOOTDELAY 3 @@ -351,6 +363,7 @@ /* **** PISMO SUPPORT *** */ +#ifndef CONFIG_BEAGLE_XM /* Configure the PISMO */ #define PISMO1_NAND_SIZE GPMC_SIZE_128M #define PISMO1_ONEN_SIZE GPMC_SIZE_128M @@ -365,13 +378,13 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP -#define CONFIG_ENV_IS_IN_NAND 1 #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET +#endif /* CONFIG_BEAGLE_XM */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 @@ -408,16 +421,21 @@ #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT + +#ifndef CONFIG_BEAGLE_XM #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC +#endif /* CONFIG_BEAGLE_XM */ + #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_OMAP3_ID_NAND #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" /* NAND boot config */ +#ifndef CONFIG_BEAGLE_XM #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 @@ -431,6 +449,7 @@ #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +#endif /* CONFIG_BEAGLE_XM */ /* * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM -- 1.8.3.1

2 2