November 2013 - U-Boot

[U-Boot] [PATCH 27/34] zynq-common: Change Env. Sector size to 128Kb
by Jagannadha Sutradharudu Teki 05 Nov '13

05 Nov '13

Changed Env. Sector size from 0x10000 to 128Kb Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- include/configs/zynq-common.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 9586261..f571349 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -150,8 +150,10 @@ #define CONFIG_BOOTP_HOSTNAME #define CONFIG_BOOTP_MAY_FAIL +/* Total Size of Environment Sector */ +#define CONFIG_ENV_SIZE (128 << 10) + /* Environment */ -#define CONFIG_ENV_SIZE 0x10000 /* Env. sector size */ #define CONFIG_ENV_IS_NOWHERE /* Default environment */ -- 1.8.3

1 0

[U-Boot] [PATCH 26/34] zynq-common: Define default environment
by Jagannadha Sutradharudu Teki 05 Nov '13

05 Nov '13

Defined default env. for autoboot FIT image from respective boot devices. Default settings: fit_image=fit.itb load_addr=0x2000000 fit_size=0x800000 flash_off=0x100000 nor_flash_off=0xE2100000 Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- include/configs/zynq-common.h | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index c823036..9586261 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -153,7 +153,35 @@ /* Environment */ #define CONFIG_ENV_SIZE 0x10000 /* Env. sector size */ #define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SYS_LOAD_ADDR 0 + +/* Default environment */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fit_image=fit.itb\0" \ + "load_addr=0x2000000\0" \ + "fit_size=0x800000\0" \ + "flash_off=0x100000\0" \ + "nor_flash_off=0xE2100000\0" \ + "fdt_high=0x20000000\0" \ + "initrd_high=0x20000000\0" \ + "qspiboot=echo Copying FIT from QSPI flash to RAM... && " \ + "sf probe 0 0 0 && " \ + "sf read ${load_addr} ${flash_off} ${fit_size} && " \ + "bootm ${load_addr}\0" \ + "norboot=echo Copying FIT from NOR flash to RAM... && " \ + "cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \ + "bootm ${load_addr}\0" \ + "nandboot=echo Copying FIT from NAND flash to RAM... && " \ + "nand read ${load_addr} ${flash_off} ${fit_size} && " \ + "bootm ${load_addr}\0" \ + "sdboot=echo Copying FIT from SD to RAM... && " \ + "fatload mmc 0 ${load_addr} ${fit_image} && " \ + "bootm ${load_addr}\0" \ + "jtagboot=echo TFTPing FIT to RAM... && " \ + "tftp ${load_addr} ${fit_image} && " \ + "bootm ${load_addr}\0" +#define CONFIG_BOOTCOMMAND "run $modeboot" +#define CONFIG_BOOTDELAY 3 /* -1 to Disable autoboot */ +#define CONFIG_SYS_LOAD_ADDR 0 /* default? */ /* Miscellaneous configurable options */ #define CONFIG_SYS_PROMPT "zynq-uboot> " -- 1.8.3

1 0

[U-Boot] [PATCH 24/34] zynq: Add zynq_zc770 xm011 board support
by Jagannadha Sutradharudu Teki 05 Nov '13

05 Nov '13

ZC770 is a complete development board based on the Xilinx Zynq-7000 All Programmable SoC, similar to ZC70x board but which has four different daughter cards, like XM010, XM011, XM012 and XM013 ZC770 XM011: - 1GB DDR3 - 8 and 16-bit Micron NAND devices - USB-UART Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- boards.cfg | 1 + include/configs/zynq_zc770.h | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/boards.cfg b/boards.cfg index 9afcfd1..9ec9794 100644 --- a/boards.cfg +++ b/boards.cfg @@ -348,6 +348,7 @@ Active arm armv7 zynq xilinx zynq zynq_zc70x - Active arm armv7 zynq xilinx zynq zynq_zed - Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> Active arm armv7 zynq xilinx zynq zynq_microzed - Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> Active arm armv7 zynq xilinx zynq zynq_zc770_xm010 zynq_zc770:ZC770_XM010 Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> +Active arm armv7 zynq xilinx zynq zynq_zc770_xm011 zynq_zc770:ZC770_XM011 Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> Active arm armv7 zynq xilinx zynq zynq_zc770_xm012 zynq_zc770:ZC770_XM012 Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> Active arm armv7 zynq xilinx zynq zynq_zc770_xm013 zynq_zc770:ZC770_XM013 Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> Active arm armv7:arm720t tegra114 nvidia dalmore dalmore - Tom Warren <twarren(a)nvidia.com> diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h index 9e7ba77..959122c 100644 --- a/include/configs/zynq_zc770.h +++ b/include/configs/zynq_zc770.h @@ -21,6 +21,10 @@ # define CONFIG_ZYNQ_SDHCI0 # define CONFIG_ZYNQ_QSPI +#elif defined(CONFIG_ZC770_XM011) +# define CONFIG_ZYNQ_SERIAL_UART1 +# define CONFIG_NAND_ZYNQ + #elif defined(CONFIG_ZC770_XM012) # define CONFIG_ZYNQ_SERIAL_UART1 # undef CONFIG_SYS_NO_FLASH -- 1.8.3

1 0

[U-Boot] [PATCH 21/34] zynq: Add zynq_zc770 xm012 board support
by Jagannadha Sutradharudu Teki 05 Nov '13

05 Nov '13

ZC770 is a complete development board based on the Xilinx Zynq-7000 All Programmable SoC, similar to ZC70x board but which has four different daughter cards, like XM010, XM011, XM012 and XM013 ZC770 XM012: - 1GB DDR3 - 64MiB Numonyx NOR flash - USB-UART Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- boards.cfg | 1 + include/configs/zynq-common.h | 16 ++++++++++++++++ include/configs/zynq_zc770.h | 4 ++++ 3 files changed, 21 insertions(+) diff --git a/boards.cfg b/boards.cfg index 11c9bb9..9afcfd1 100644 --- a/boards.cfg +++ b/boards.cfg @@ -348,6 +348,7 @@ Active arm armv7 zynq xilinx zynq zynq_zc70x - Active arm armv7 zynq xilinx zynq zynq_zed - Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> Active arm armv7 zynq xilinx zynq zynq_microzed - Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> Active arm armv7 zynq xilinx zynq zynq_zc770_xm010 zynq_zc770:ZC770_XM010 Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> +Active arm armv7 zynq xilinx zynq zynq_zc770_xm012 zynq_zc770:ZC770_XM012 Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> Active arm armv7 zynq xilinx zynq zynq_zc770_xm013 zynq_zc770:ZC770_XM013 Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> Active arm armv7:arm720t tegra114 nvidia dalmore dalmore - Tom Warren <twarren(a)nvidia.com> Active arm armv7:arm720t tegra20 avionic-design medcom-wide medcom-wide - Thierry Reding <thierry.reding(a)avionic-design.de> diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 6b8b6c4..ffe1b93 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -86,6 +86,22 @@ # define CONFIG_SPI_FLASH_WINBOND #endif +/* NOR */ +#ifndef CONFIG_SYS_NO_FLASH +# define CONFIG_SYS_FLASH_BASE 0xE2000000 +# define CONFIG_SYS_FLASH_SIZE (16 * 1024 * 1024) +# define CONFIG_SYS_MAX_FLASH_BANKS 1 +# define CONFIG_SYS_MAX_FLASH_SECT 512 +# define CONFIG_SYS_FLASH_ERASE_TOUT 1000 +# define CONFIG_SYS_FLASH_WRITE_TOUT 5000 +# define CONFIG_FLASH_SHOW_PROGRESS 10 +# define CONFIG_SYS_FLASH_CFI +# undef CONFIG_SYS_FLASH_EMPTY_INFO +# define CONFIG_FLASH_CFI_DRIVER +# undef CONFIG_SYS_FLASH_PROTECTION +# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#endif + /* MMC */ #if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1) # define CONFIG_MMC diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h index bcd9a6d..9e7ba77 100644 --- a/include/configs/zynq_zc770.h +++ b/include/configs/zynq_zc770.h @@ -21,6 +21,10 @@ # define CONFIG_ZYNQ_SDHCI0 # define CONFIG_ZYNQ_QSPI +#elif defined(CONFIG_ZC770_XM012) +# define CONFIG_ZYNQ_SERIAL_UART1 +# undef CONFIG_SYS_NO_FLASH + #elif defined(CONFIG_ZC770_XM013) # define CONFIG_ZYNQ_SERIAL_UART0 # define CONFIG_ZYNQ_GEM1 -- 1.8.3

1 0

[U-Boot] [PATCH 20/34] zynq: Add zynq_zc770 xm013 board support
by Jagannadha Sutradharudu Teki 05 Nov '13

05 Nov '13

ZC770 is a complete development board based on the Xilinx Zynq-7000 All Programmable SoC, similar to ZC70x board but which has four different daughter cards, like XM010, XM011, XM012 and XM013 ZC770 XM013: - 1GB DDR3 - 128 Mb Quad-SPI Flash(dual parallel) - USB-UART Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- boards.cfg | 1 + include/configs/zynq_zc770.h | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/boards.cfg b/boards.cfg index 73b4843..11c9bb9 100644 --- a/boards.cfg +++ b/boards.cfg @@ -348,6 +348,7 @@ Active arm armv7 zynq xilinx zynq zynq_zc70x - Active arm armv7 zynq xilinx zynq zynq_zed - Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> Active arm armv7 zynq xilinx zynq zynq_microzed - Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> Active arm armv7 zynq xilinx zynq zynq_zc770_xm010 zynq_zc770:ZC770_XM010 Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> +Active arm armv7 zynq xilinx zynq zynq_zc770_xm013 zynq_zc770:ZC770_XM013 Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> Active arm armv7:arm720t tegra114 nvidia dalmore dalmore - Tom Warren <twarren(a)nvidia.com> Active arm armv7:arm720t tegra20 avionic-design medcom-wide medcom-wide - Thierry Reding <thierry.reding(a)avionic-design.de> Active arm armv7:arm720t tegra20 avionic-design plutux plutux - Thierry Reding <thierry.reding(a)avionic-design.de> diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h index 4870b3c..bcd9a6d 100644 --- a/include/configs/zynq_zc770.h +++ b/include/configs/zynq_zc770.h @@ -21,6 +21,12 @@ # define CONFIG_ZYNQ_SDHCI0 # define CONFIG_ZYNQ_QSPI +#elif defined(CONFIG_ZC770_XM013) +# define CONFIG_ZYNQ_SERIAL_UART0 +# define CONFIG_ZYNQ_GEM1 +# define CONFIG_ZYNQ_GEM_PHY_ADDR1 7 +# define CONFIG_ZYNQ_QSPI + #else # define CONFIG_ZYNQ_SERIAL_UART0 #endif -- 1.8.3

1 0

[U-Boot] [PATCH 19/34] zynq: Add zynq_zc770 xm010 board support
by Jagannadha Sutradharudu Teki 05 Nov '13

05 Nov '13

ZC770 is a complete development board based on the Xilinx Zynq-7000 All Programmable SoC, similar to ZC70x board but which has four different daughter cards, like XM010, XM011, XM012 and XM013 ZC770 XM010: - 1GB DDR3 - 128 Mb Quad-SPI Flash - 8 Mb SST SI flash - Full size SD/MMC card cage - 10/100/1000 Ethernet - USB-UART Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- boards.cfg | 1 + include/configs/zynq_zc770.h | 30 ++++++++++++++++++++++++++++++ 2 files changed, 31 insertions(+) create mode 100644 include/configs/zynq_zc770.h diff --git a/boards.cfg b/boards.cfg index e85dc0e..73b4843 100644 --- a/boards.cfg +++ b/boards.cfg @@ -347,6 +347,7 @@ Active arm armv7 vf610 freescale vf610twr Active arm armv7 zynq xilinx zynq zynq_zc70x - Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> Active arm armv7 zynq xilinx zynq zynq_zed - Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> Active arm armv7 zynq xilinx zynq zynq_microzed - Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> +Active arm armv7 zynq xilinx zynq zynq_zc770_xm010 zynq_zc770:ZC770_XM010 Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> Active arm armv7:arm720t tegra114 nvidia dalmore dalmore - Tom Warren <twarren(a)nvidia.com> Active arm armv7:arm720t tegra20 avionic-design medcom-wide medcom-wide - Thierry Reding <thierry.reding(a)avionic-design.de> Active arm armv7:arm720t tegra20 avionic-design plutux plutux - Thierry Reding <thierry.reding(a)avionic-design.de> diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h new file mode 100644 index 0000000..4870b3c --- /dev/null +++ b/include/configs/zynq_zc770.h @@ -0,0 +1,30 @@ +/* + * (C) Copyright 2013 Xilinx, Inc. + * + * Configuration settings for the Xilinx Zynq ZC770 board. + * See zynq-common.h for Zynq common configs + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ZYNQ_ZC770_H +#define __CONFIG_ZYNQ_ZC770_H + +#define PHYS_SDRAM_1_SIZE (1024 * 1024 * 1024) + +#define CONFIG_SYS_NO_FLASH + +#if defined(CONFIG_ZC770_XM010) +# define CONFIG_ZYNQ_SERIAL_UART1 +# define CONFIG_ZYNQ_GEM0 +# define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 +# define CONFIG_ZYNQ_SDHCI0 +# define CONFIG_ZYNQ_QSPI + +#else +# define CONFIG_ZYNQ_SERIAL_UART0 +#endif + +#include <configs/zynq-common.h> + +#endif /* __CONFIG_ZYNQ_ZC770_H */ -- 1.8.3

1 0

[U-Boot] [PATCH 18/34] zynq: Add zynq microzed board support
by Jagannadha Sutradharudu Teki 05 Nov '13

05 Nov '13

MicroZed is a low-cost development board based on the Xilinx Zynq-7000 All Programmable SoC. APSOC: - XC7Z010-1CLG400C Memory: - 1 GB of DDR3 SDRAM - 128Mb of QSPI flash(S25FL128SAGBHI200) - Micro SD card interface Communication: - 10/100/1000 Ethernet - USB 2.0 - USB-UART User I/O: - 100 User I/O (50 per connector) - Configurable as up to 48 LVDS pairs or 100 single-ended I/O Misc: - Xilinx PC4 JTAG configuration port - PS JTAG pins accessible via Pmod - 33.33 MHz oscillator - User LED and push switch For more info - http://zedboard.org/product/microzed Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- boards.cfg | 1 + include/configs/zynq_microzed.h | 26 ++++++++++++++++++++++++++ 2 files changed, 27 insertions(+) create mode 100644 include/configs/zynq_microzed.h diff --git a/boards.cfg b/boards.cfg index 4a2286c..e85dc0e 100644 --- a/boards.cfg +++ b/boards.cfg @@ -346,6 +346,7 @@ Active arm armv7 u8500 st-ericsson u8500 Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang <b18965(a)freescale.com> Active arm armv7 zynq xilinx zynq zynq_zc70x - Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> Active arm armv7 zynq xilinx zynq zynq_zed - Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> +Active arm armv7 zynq xilinx zynq zynq_microzed - Michal Simek <monstr(a)monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com> Active arm armv7:arm720t tegra114 nvidia dalmore dalmore - Tom Warren <twarren(a)nvidia.com> Active arm armv7:arm720t tegra20 avionic-design medcom-wide medcom-wide - Thierry Reding <thierry.reding(a)avionic-design.de> Active arm armv7:arm720t tegra20 avionic-design plutux plutux - Thierry Reding <thierry.reding(a)avionic-design.de> diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h new file mode 100644 index 0000000..e65df2b --- /dev/null +++ b/include/configs/zynq_microzed.h @@ -0,0 +1,26 @@ +/* + * (C) Copyright 2013 Xilinx, Inc. + * + * Configuration for Micro Zynq Evaluation and Development Board - MicroZedBoard + * See zynq-common.h for Zynq common configs + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ZYNQ_MICROZED_H +#define __CONFIG_ZYNQ_MICROZED_H + +#define PHYS_SDRAM_1_SIZE (1024 * 1024 * 1024) + +#define CONFIG_ZYNQ_SERIAL_UART1 +#define CONFIG_ZYNQ_GEM0 +#define CONFIG_ZYNQ_GEM_PHY_ADDR0 0 + +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ZYNQ_QSPI +#define CONFIG_ZYNQ_SDHCI0 + +#include <configs/zynq-common.h> + +#endif /* __CONFIG_ZYNQ_MICROZED_H */ -- 1.8.3

1 0

[U-Boot] [PATCH 17/34] zynq: zc70x: Add Catalyst 24WC08 EEPROM config support
by Jagannadha Sutradharudu Teki 05 Nov '13

05 Nov '13

Adds configurations for Catalyst 24WC08 EEPROM, which is present on the zynq boards. Enable EEPROM support for zc70x boards. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- include/configs/zynq-common.h | 10 ++++++++++ include/configs/zynq_zc70x.h | 1 + 2 files changed, 11 insertions(+) diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index e702820..6b8b6c4 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -108,6 +108,16 @@ # define CONFIG_SYS_I2C_SLAVE 1 #endif +/* EEPROM */ +#ifdef CONFIG_ZYNQ_EEPROM +# define CONFIG_CMD_EEPROM +# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +# define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 +# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 +# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 +# define CONFIG_SYS_EEPROM_SIZE 1024 /* Bytes */ +#endif + #define CONFIG_BOOTP_SERVERIP #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h index a273005..e928ceb 100644 --- a/include/configs/zynq_zc70x.h +++ b/include/configs/zynq_zc70x.h @@ -21,6 +21,7 @@ #define CONFIG_ZYNQ_QSPI #define CONFIG_ZYNQ_SDHCI0 #define CONFIG_ZYNQ_I2C0 +#define CONFIG_ZYNQ_EEPROM #define CONFIG_ZYNQ_BOOT_FREEBSD #include <configs/zynq-common.h> -- 1.8.3

1 0

[U-Boot] [PATCH 16/34] zynq-common: Define exact TEXT_BASE
by Jagannadha Sutradharudu Teki 05 Nov '13

05 Nov '13

Defined TEXT_BASE for u-boot starts from 0x4000000 w.r.t zynq memory-map. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- include/configs/zynq-common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 0e732de..e702820 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -133,7 +133,7 @@ sizeof(CONFIG_SYS_PROMPT) + 16) /* Physical Memory map */ -#define CONFIG_SYS_TEXT_BASE 0 +#define CONFIG_SYS_TEXT_BASE 0x4000000 #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE 0 -- 1.8.3

1 0

[U-Boot] [PATCH 14/34] zynq-common: Define CONFIG_SPI_FLASH_BAR
by Jagannadha Sutradharudu Teki 05 Nov '13

05 Nov '13

Enabled bank/extn' addr register support for accessing > 16Mbyte flash devices. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- include/configs/zynq-common.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index d69c59b..7e02289 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -80,6 +80,7 @@ # define CONFIG_CMD_SF # define CONFIG_SF_DEFAULT_SPEED 30000000 # define CONFIG_SPI_FLASH +# define CONFIG_SPI_FLASH_BAR # define CONFIG_SPI_FLASH_STMICRO # define CONFIG_SPI_FLASH_SPANSION # define CONFIG_SPI_FLASH_WINBOND -- 1.8.3

1 0