August 2012 - U-Boot

[U-Boot] [PATCH] spi: xilinx: Remove unused variable
by Stephan Linz 07 Aug '12

07 Aug '12

Warning is: xilinx_spi.c: In function 'spi_setup_slave': xilinx_spi.c:81: warning: unused variable 'regs' Signed-off-by: Stephan Linz <linz(a)li-pro.net> CC: Michal Simek <monstr(a)monstr.eu> --- drivers/spi/xilinx_spi.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c index e563c19..52a4134 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/xilinx_spi.c @@ -78,7 +78,6 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int mode) { struct xilinx_spi_slave *xilspi; - struct xilinx_spi_reg *regs; if (!spi_cs_is_valid(bus, cs)) { printf("XILSPI error: %s: unsupported bus %d / cs %d\n", -- 1.7.0.4

1 0

[U-Boot] [PATCH 1/2] serial: Support serial multi for Microblaze
by Michal Simek 07 Aug '12

07 Aug '12

enable serial multi for Microblaze. Signed-off-by: Michal Simek <monstr(a)monstr.eu> --- include/serial.h | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/include/serial.h b/include/serial.h index 5173499..9475779 100644 --- a/include/serial.h +++ b/include/serial.h @@ -31,7 +31,8 @@ extern struct serial_device *default_serial_console(void); defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) || \ defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \ defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520) || \ - defined(CONFIG_TEGRA2) || defined(CONFIG_SYS_COREBOOT) + defined(CONFIG_TEGRA2) || defined(CONFIG_SYS_COREBOOT) || \ + defined(CONFIG_MICROBLAZE) extern struct serial_device serial0_device; extern struct serial_device serial1_device; #if defined(CONFIG_SYS_NS16550_SERIAL) -- 1.7.0.4

2 3

[U-Boot] [PATCH] MAINTAINERS: cleanup for km ppc boards
by Holger Brunck 07 Aug '12

07 Aug '12

Signed-off-by: Holger Brunck <holger.brunck(a)keymile.com> cc: Heiko Schocher <hs(a)denx.de> cc: Valentin Longchamp <valentin.longchamp(a)keymile.com> cc: Gerlando Falauto <gerlando.falauto(a)keymile.com> --- MAINTAINERS | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 84413de..c8d66b8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -72,6 +72,9 @@ Holger Brunck <holger.brunck(a)keymile.com> kmeter1 MPC8360 kmcoge5ne MPC8360 + mgcoge MPC8247 + mgcoge3ne MPC8247 + suvd3 MPC8321 tuge1 MPC8321 tuxx1 MPC8321 @@ -441,13 +444,10 @@ Heiko Schocher <hs(a)denx.de> ids8247 MPC8247 jupiter MPC5200 kmsupx5 MPC8321 - mgcoge MPC8247 - mgcoge3ne MPC8247 mucmc52 MPC5200 muas3001 MPC8270 municse MPC5200 sc3 PPC405GP - suvd3 MPC8321 uc101 MPC5200 ve8313 MPC8313 -- 1.7.1

3 2

[U-Boot] [PATCH] spi: Fix merge conflicts - Makefile
by Michal Simek 07 Aug '12

07 Aug '12

The patch "spi: tegra2: rename tegra2_spi.* to tegra_spi.*" (sha1: edffa63d3d6e76991998789f9fcbaa483731ca65) renamed tegra2_spi.c to tegra_spi.c and the patch "Merge branch 'master' of git://git.denx.de/u-boot-microblaze" (sha1: d978780b2e676c005460cd561f4f15b5220bdf49) has wrongly resolved confict. This patch fix it. Signed-off-by: Michal Simek <monstr(a)monstr.eu> --- drivers/spi/Makefile | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index cd3f9fa..80b981f 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -44,7 +44,6 @@ COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o COBJS-$(CONFIG_SH_SPI) += sh_spi.o COBJS-$(CONFIG_FSL_ESPI) += fsl_espi.o COBJS-$(CONFIG_TEGRA_SPI) += tegra_spi.o -COBJS-$(CONFIG_TEGRA2_SPI) += tegra2_spi.o COBJS-$(CONFIG_XILINX_SPI) += xilinx_spi.o COBJS := $(COBJS-y) -- 1.7.0.4

2 1

[U-Boot] [PATCH v2] i.MX28: bug fixes in PMU configuration code
by Stathis Voukelatos 07 Aug '12

07 Aug '12

Fixed some typos in the i.MX28 PMU code that sets up the VDDD and VDDIO power rails. In addition the VDDD and VDDIO brownout offset values should be divided by a step size before being programmed to the corresponding registers. Signed-off-by: Stathis Voukelatos <stathis.voukelatos(a)linn.co.uk> Cc: Stefano Babic <sbabic(a)denx.de> Cc: Marek Vasut <marek.vasut(a)gmail.com> --- Changes for v2: - White space cleanup arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-) diff --git arch/arm/cpu/arm926ejs/mx28/spl_power_init.c arch/arm/cpu/arm926ejs/mx28/spl_power_init.c index 4b09b0c..cc71af8 100644 --- arch/arm/cpu/arm926ejs/mx28/spl_power_init.c +++ arch/arm/cpu/arm926ejs/mx28/spl_power_init.c @@ -716,7 +716,7 @@ int mx28_get_vddio_power_source_off(void) tmp = readl(&power_regs->hw_power_vddioctrl); if (tmp & POWER_VDDIOCTRL_DISABLE_FET) { if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) == - POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) { + POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS) { return 1; } } @@ -724,7 +724,7 @@ int mx28_get_vddio_power_source_off(void) if (!(readl(&power_regs->hw_power_5vctrl) & POWER_5VCTRL_ENABLE_DCDC)) { if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) == - POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) { + POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS) { return 1; } } @@ -772,7 +772,7 @@ void mx28_power_set_vddio(uint32_t new_target, uint32_t new_brownout) uint32_t cur_target, diff, bo_int = 0; uint32_t powered_by_linreg = 0; - new_brownout = new_target - new_brownout; + new_brownout = (new_target - new_brownout + 25) / 50; cur_target = readl(&power_regs->hw_power_vddioctrl); cur_target &= POWER_VDDIOCTRL_TRG_MASK; @@ -858,8 +858,8 @@ void mx28_power_set_vddio(uint32_t new_target, uint32_t new_brownout) } clrsetbits_le32(&power_regs->hw_power_vddioctrl, - POWER_VDDDCTRL_BO_OFFSET_MASK, - new_brownout << POWER_VDDDCTRL_BO_OFFSET_OFFSET); + POWER_VDDIOCTRL_BO_OFFSET_MASK, + new_brownout << POWER_VDDIOCTRL_BO_OFFSET_OFFSET); } void mx28_power_set_vddd(uint32_t new_target, uint32_t new_brownout) @@ -869,7 +869,7 @@ void mx28_power_set_vddd(uint32_t new_target, uint32_t new_brownout) uint32_t cur_target, diff, bo_int = 0; uint32_t powered_by_linreg = 0; - new_brownout = new_target - new_brownout; + new_brownout = (new_target - new_brownout + 12) / 25; cur_target = readl(&power_regs->hw_power_vdddctrl); cur_target &= POWER_VDDDCTRL_TRG_MASK; -- 1.7.2.5 Stathis Voukelatos Senior Software Engineer Linn Products Ltd. Glasgow Road Eaglesham, Glasgow G76 0EQ, UK Tel: +44 (0)141 3035191 Email: stathis.voukelatos(a)linn.co.uk

4 5

[U-Boot] [PATCH] ext2fs: fix warning: 'blocknxt' may be used uninitialized with gcc 4.2
by Tom Rini 07 Aug '12

07 Aug '12

The above warning was introduced originally in 436da3c "ext2load: increase read speed" and fixed for newer toolchains in b803273 "ext2fs: fix warning: 'blocknxt' may be used uninitialized". This change did not fix the warning with gcc 4.2, as found in ELDK 4.2. If we rework the while loop to initalize blocknxt before entering the warning really goes away. Tested on am335x with an approx 7mb file and crc32 in U-Boot befor and after this change. Cc: Wolfgang Denk <wd(a)denx.de> Cc: Eric Nelson <eric.nelson(a)boundarydevices.com> Cc: Thierry Reding <thierry.reding(a)avionic-design.de> Cc: Jason Cooper <u-boot(a)lakedaemon.net> Cc: Andreas Bießmann <andreas.devel(a)googlemail.com> Cc: Reinhard Arlt <reinhard.arlt(a)esd-electronics.com> Cc: Kim Phillips <kim.phillips(a)freescale.com> Signed-off-by: Tom Rini <trini(a)ti.com> --- fs/ext2/ext2fs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ext2/ext2fs.c b/fs/ext2/ext2fs.c index 182f0ac..418404e 100644 --- a/fs/ext2/ext2fs.c +++ b/fs/ext2/ext2fs.c @@ -440,9 +440,8 @@ int ext2fs_read_file /* grab middle blocks in one go */ if (i != pos / blocksize && i < blockcnt - 1 && blockcnt > 3) { int oldblk = blknr; - int blocknxt; + int blocknxt = ext2fs_read_block(node, i + 1); while (i < blockcnt - 1) { - blocknxt = ext2fs_read_block(node, i + 1); if (blocknxt == (oldblk + 1)) { oldblk = blocknxt; i++; @@ -450,6 +449,7 @@ int ext2fs_read_file blocknxt = ext2fs_read_block(node, i); break; } + blocknxt = ext2fs_read_block(node, i); } if (oldblk == blknr) -- 1.7.9.5

2 1

[U-Boot] u-boot script question
by Sridhar Addagada 07 Aug '12

07 Aug '12

I'm using spare bytes of the nvram of the RTC chip to determine which of my two kernels should be booted. Trying to scrip that in u-boot script I'm doing the following. 1. Load 200010 with 0 (mw.b 200010 0) 2. Load 200014 with value from nvram (i2c read 68 15 1 200014) 3. if cmp.b 200010 200014 1; then run boot0; else run boot1;fi Is it possible to compare the contents of the memory location with a constant like if test #200010 == 1; then run boot0; else run boot1;fi Thanks S

2 1

[U-Boot] kernel upgradation 2.6.23 to 2.6.35.13 with old U-boot 1.3.0 version
by rajeshvangari vangari 07 Aug '12

07 Aug '12

Hi, I have MPC8313E-RDB board on which U-boot 1.3.0(along with patches) and kernel 2.6.23(along with patches) are running. Now, i would like to upgrade the kernel from 2.6.23 to 2.6.35.13 with old U-boot 1.3.0(along with patches), i am facing problem in loading firmware and ethernet interfaces like "eth0/eth1 : are not attached to PHY". Is that i have to upgrade also U-boot also to latest version? If so what version of u-boot is compatiable with linux kernel 2.6.35.13. Please let me know what is the issue. ASAP. -- Thanks & Regards, Rajesh Vangari.

2 1

[U-Boot] pull request for u-boot-tegra/master
by Tom Warren 07 Aug '12

07 Aug '12

Albert, Please pull u-boot-tegra/master into ARM master. Thanks! The following changes since commit f8f09dd40423b7f9ea0f0b810a8f5da9cd580a17: Benoît Thébaudeau (1): ARM1136: Fix cache range checks are available in the git repository at: git://git.denx.de/u-boot-tegra master Allen Martin (15): tegra20: rename tegra2 -> tegra20 tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common tegra20: rename CONFIG_MACH_TEGRA_GENERIC tegra20: tec: add tegra20-common-post.h tegra20: make board mkdir commands unconditional mkconfig: add support for SPL CPU ARM: Fix arm720t SPL build tegra20: remove timer_init from SPL build ARM: add tegra20 support to arm720t tegra20: add u-boot-*-tegra.bin targets tegra20: move SDRAM param save to later in boot tegra20: enable SPL for tegra20 boards arm: enable libgcc build for SPL spl: fix SPL build of private libgcc tegra20: Remove armv4t build flags MAINTAINERS | 18 ++-- Makefile | 26 ++++ arch/arm/cpu/arm720t/cpu.c | 2 + arch/arm/cpu/arm720t/interrupts.c | 5 + arch/arm/cpu/arm720t/start.S | 19 +++- .../cpu/{armv7/tegra2 => arm720t/tegra20}/Makefile | 28 +--- .../arch-tegra2 => cpu/arm720t/tegra20}/board.h | 11 +- .../{armv7/tegra2 => arm720t/tegra20}/config.mk | 12 -- .../{armv7/tegra2/ap20.c => arm720t/tegra20/cpu.c} | 148 ++------------------ .../ap20.h => cpu/arm720t/tegra20/cpu.h} | 15 +-- arch/arm/cpu/arm720t/tegra20/spl.c | 132 +++++++++++++++++ arch/arm/cpu/armv7/start.S | 2 - arch/arm/cpu/armv7/{tegra2 => tegra20}/Makefile | 15 +-- .../cpu/armv7/{tegra2 => tegra20}/cmd_enterrcm.c | 4 +- arch/arm/cpu/armv7/{tegra2 => tegra20}/config.mk | 12 -- arch/arm/cpu/armv7/{tegra2 => tegra20}/usb.c | 2 +- .../cpu/{armv7/tegra2 => tegra20-common}/Makefile | 29 ++--- arch/arm/cpu/tegra20-common/ap20.c | 131 +++++++++++++++++ .../cpu/{armv7/tegra2 => tegra20-common}/board.c | 39 ++---- .../cpu/{armv7/tegra2 => tegra20-common}/clock.c | 10 +- .../cpu/{armv7/tegra2 => tegra20-common}/crypto.c | 0 .../cpu/{armv7/tegra2 => tegra20-common}/crypto.h | 0 .../arm/cpu/{armv7/tegra2 => tegra20-common}/emc.c | 2 +- .../cpu/{armv7/tegra2 => tegra20-common}/funcmux.c | 2 +- .../tegra2 => tegra20-common}/lowlevel_init.S | 0 .../cpu/{armv7/tegra2 => tegra20-common}/pinmux.c | 4 +- .../arm/cpu/{armv7/tegra2 => tegra20-common}/pmu.c | 2 +- .../{armv7/tegra2 => tegra20-common}/sys_info.c | 2 +- .../cpu/{armv7/tegra2 => tegra20-common}/timer.c | 2 +- .../{armv7/tegra2 => tegra20-common}/warmboot.c | 18 ++-- .../tegra2 => tegra20-common}/warmboot_avp.c | 4 +- .../tegra2 => tegra20-common}/warmboot_avp.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/ap20.h | 4 +- .../asm/{arch-tegra2 => arch-tegra20}/apb_misc.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/board.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/clk_rst.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/clock.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/emc.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/flow.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/funcmux.h | 2 +- .../asm/{arch-tegra2 => arch-tegra20}/fuse.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/gp_padctrl.h | 2 +- .../asm/{arch-tegra2 => arch-tegra20}/gpio.h | 2 +- arch/arm/include/asm/arch-tegra20/hardware.h | 29 ++++ .../asm/{arch-tegra2 => arch-tegra20}/mmc.h | 8 +- .../asm/{arch-tegra2 => arch-tegra20}/pinmux.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/pmc.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/pmu.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/scu.h | 0 .../{arch-tegra2 => arch-tegra20}/sdram_param.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/sys_proto.h | 4 +- .../tegra2.h => arch-tegra20/tegra20.h} | 18 ++-- .../asm/{arch-tegra2 => arch-tegra20}/tegra_i2c.h | 2 +- .../asm/{arch-tegra2 => arch-tegra20}/tegra_spi.h | 4 +- .../asm/{arch-tegra2 => arch-tegra20}/timer.h | 6 +- .../uart-spi-switch.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/uart.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/usb.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/warmboot.h | 0 arch/arm/lib/Makefile | 2 +- board/avionic-design/common/tamonten.c | 4 +- .../dts/{tegra2-medcom.dts => tegra20-medcom.dts} | 0 .../dts/{tegra2-plutux.dts => tegra20-plutux.dts} | 0 .../dts/{tegra2-tec.dts => tegra20-tec.dts} | 0 board/avionic-design/medcom/Makefile | 2 - board/avionic-design/plutux/Makefile | 2 - board/avionic-design/tec/Makefile | 2 - .../dts/{tegra2-paz00.dts => tegra20-paz00.dts} | 0 board/compal/paz00/Makefile | 2 - board/compal/paz00/paz00.c | 6 +- ...{tegra2-trimslice.dts => tegra20-trimslice.dts} | 0 board/compulab/trimslice/Makefile | 2 - board/compulab/trimslice/trimslice.c | 6 +- board/nvidia/common/board.c | 17 ++- board/nvidia/common/emc.c | 2 +- board/nvidia/common/uart-spi-switch.c | 2 +- .../{tegra2-harmony.dts => tegra20-harmony.dts} | 2 +- .../{tegra2-seaboard.dts => tegra20-seaboard.dts} | 0 .../{tegra2-ventana.dts => tegra20-ventana.dts} | 2 +- .../{tegra2-whistler.dts => tegra20-whistler.dts} | 2 +- board/nvidia/harmony/harmony.c | 6 +- board/nvidia/seaboard/seaboard.c | 6 +- board/nvidia/whistler/whistler.c | 6 +- boards.cfg | 23 ++-- doc/README.SPL | 12 ++ drivers/gpio/tegra_gpio.c | 12 +- drivers/i2c/tegra_i2c.c | 12 +- drivers/input/Makefile | 2 +- drivers/mmc/tegra_mmc.c | 32 ++-- drivers/mmc/tegra_mmc.h | 12 +- drivers/spi/tegra_spi.c | 10 +- include/configs/harmony.h | 14 +- include/configs/medcom.h | 12 +- include/configs/paz00.h | 12 +- include/configs/plutux.h | 12 +- include/configs/seaboard.h | 20 ++-- include/configs/tec.h | 12 +- ...{tegra2-common-post.h => tegra20-common-post.h} | 73 +++++++++- .../configs/{tegra2-common.h => tegra20-common.h} | 44 ++++-- include/configs/trimslice.h | 14 +- include/configs/ventana.h | 12 +- include/configs/whistler.h | 14 +- include/fdtdec.h | 12 +- include/serial.h | 2 +- mkconfig | 24 ++- spl/Makefile | 10 ++ 106 files changed, 742 insertions(+), 510 deletions(-) copy arch/arm/cpu/{armv7/tegra2 => arm720t/tegra20}/Makefile (56%) copy arch/arm/{include/asm/arch-tegra2 => cpu/arm720t/tegra20}/board.h (81%) copy arch/arm/cpu/{armv7/tegra2 => arm720t/tegra20}/config.mk (73%) rename arch/arm/cpu/{armv7/tegra2/ap20.c => arm720t/tegra20/cpu.c} (63%) copy arch/arm/{include/asm/arch-tegra2/ap20.h => cpu/arm720t/tegra20/cpu.h} (93%) create mode 100644 arch/arm/cpu/arm720t/tegra20/spl.c copy arch/arm/cpu/armv7/{tegra2 => tegra20}/Makefile (69%) rename arch/arm/cpu/armv7/{tegra2 => tegra20}/cmd_enterrcm.c (94%) rename arch/arm/cpu/armv7/{tegra2 => tegra20}/config.mk (74%) rename arch/arm/cpu/armv7/{tegra2 => tegra20}/usb.c (99%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/Makefile (66%) create mode 100644 arch/arm/cpu/tegra20-common/ap20.c rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/board.c (79%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/clock.c (99%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/crypto.c (100%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/crypto.h (100%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/emc.c (99%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/funcmux.c (99%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/lowlevel_init.S (100%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/pinmux.c (99%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/pmu.c (98%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/sys_info.c (98%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/timer.c (98%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/warmboot.c (95%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/warmboot_avp.c (98%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/warmboot_avp.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/ap20.h (98%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/apb_misc.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/board.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/clk_rst.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/clock.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/emc.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/flow.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/funcmux.h (97%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/fuse.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/gp_padctrl.h (98%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/gpio.h (99%) create mode 100644 arch/arm/include/asm/arch-tegra20/hardware.h rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/mmc.h (84%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/pinmux.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/pmc.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/pmu.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/scu.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/sdram_param.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/sys_proto.h (93%) rename arch/arm/include/asm/{arch-tegra2/tegra2.h => arch-tegra20/tegra20.h} (87%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/tegra_i2c.h (99%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/tegra_spi.h (96%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/timer.h (92%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/uart-spi-switch.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/uart.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/usb.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/warmboot.h (100%) rename board/avionic-design/dts/{tegra2-medcom.dts => tegra20-medcom.dts} (100%) rename board/avionic-design/dts/{tegra2-plutux.dts => tegra20-plutux.dts} (100%) rename board/avionic-design/dts/{tegra2-tec.dts => tegra20-tec.dts} (100%) rename board/compal/dts/{tegra2-paz00.dts => tegra20-paz00.dts} (100%) rename board/compulab/dts/{tegra2-trimslice.dts => tegra20-trimslice.dts} (100%) rename board/nvidia/dts/{tegra2-harmony.dts => tegra20-harmony.dts} (92%) rename board/nvidia/dts/{tegra2-seaboard.dts => tegra20-seaboard.dts} (100%) rename board/nvidia/dts/{tegra2-ventana.dts => tegra20-ventana.dts} (92%) rename board/nvidia/dts/{tegra2-whistler.dts => tegra20-whistler.dts} (94%) rename include/configs/{tegra2-common-post.h => tegra20-common-post.h} (74%) rename include/configs/{tegra2-common.h => tegra20-common.h} (84%)

4 11

[U-Boot] [PATCH] am335x_evm: enable SMSC PHY driver
by Ilya Yanok 07 Aug '12

07 Aug '12

Beaglebone uses SMSC PHY which works incorrectly with generic PHY driver so enable SMSC PHY driver to fix networking problems on Beaglebone. Signed-off-by: Ilya Yanok <ilya.yanok(a)cogentembedded.com> --- include/configs/am335x_evm.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 69ab076..c827ebf 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -242,5 +242,6 @@ #define CONFIG_NET_MULTI #define CONFIG_PHY_GIGE #define CONFIG_PHYLIB +#define CONFIG_PHY_SMSC #endif /* ! __CONFIG_AM335X_EVM_H */ -- 1.7.9.5

2 1