August 2012 - U-Boot

[U-Boot] Ethernet-USB adapter
by Daniel Ścisłowski 19 Aug '12

19 Aug '12

Hello, using U-Boot 2012.07 how I can run ethernet via USB. I have Moschip Semiconductor UA0025C and USB Hub. But how to set MAC address? When board starts U-Boot shows "No ethernet found". My board is Beagleboard C4. Regards Dan

1 0

[U-Boot] [PATCH] dm: mips: Import libgcc components from Linux
by Marek Vasut 19 Aug '12

19 Aug '12

Import ashldr3, ashrdi3 and lshrdi3 to squash possible libgcc fp mismatch, resulting in the following warning: mips-linux-gnu-ld: Warning: /usr/lib/gcc/mips-linux-gnu/4.7/libgcc.a(_lshrdi3.o) uses hard float, u-boot uses soft float mips-linux-gnu-ld: Warning: /usr/lib/gcc/mips-linux-gnu/4.7/libgcc.a(_ashldi3.o) uses hard float, u-boot uses soft float Imported from Linux (linux-next 20120723) as of commit: commit 72fbfb260197a52c2bc2583f3e8f15d261d0f924 Author: Ralf Baechle <ralf(a)linux-mips.org> Date: Wed Jun 7 13:25:37 2006 +0100 [MIPS] Fix optimization for size build. It took a while longer than on other architectures but gcc has finally started to strike us as well ... This also fixes the damage by 6edfba1b33c701108717f4e036320fc39abe1912. Signed-off-by: Ralf Baechle <ralf(a)linux-mips.org> Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck(a)googlemail.com> --- arch/mips/lib/Makefile | 2 ++ arch/mips/lib/ashldi3.c | 25 +++++++++++++++++++++++++ arch/mips/lib/ashrdi3.c | 27 +++++++++++++++++++++++++++ arch/mips/lib/libgcc.h | 25 +++++++++++++++++++++++++ arch/mips/lib/lshrdi3.c | 25 +++++++++++++++++++++++++ 5 files changed, 104 insertions(+) create mode 100644 arch/mips/lib/ashldi3.c create mode 100644 arch/mips/lib/ashrdi3.c create mode 100644 arch/mips/lib/libgcc.h create mode 100644 arch/mips/lib/lshrdi3.c diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index 9244f31..a469e30 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -34,6 +34,8 @@ else COBJS-y += bootm.o endif +COBJS-y += ashldi3.o ashrdi3.o lshrdi3.o + SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) diff --git a/arch/mips/lib/ashldi3.c b/arch/mips/lib/ashldi3.c new file mode 100644 index 0000000..9b50d86 --- /dev/null +++ b/arch/mips/lib/ashldi3.c @@ -0,0 +1,25 @@ +#include "libgcc.h" + +long long __ashldi3(long long u, word_type b) +{ + DWunion uu, w; + word_type bm; + + if (b == 0) + return u; + + uu.ll = u; + bm = 32 - b; + + if (bm <= 0) { + w.s.low = 0; + w.s.high = (unsigned int) uu.s.low << -bm; + } else { + const unsigned int carries = (unsigned int) uu.s.low >> bm; + + w.s.low = (unsigned int) uu.s.low << b; + w.s.high = ((unsigned int) uu.s.high << b) | carries; + } + + return w.ll; +} diff --git a/arch/mips/lib/ashrdi3.c b/arch/mips/lib/ashrdi3.c new file mode 100644 index 0000000..f30359b --- /dev/null +++ b/arch/mips/lib/ashrdi3.c @@ -0,0 +1,27 @@ +#include "libgcc.h" + +long long __ashrdi3(long long u, word_type b) +{ + DWunion uu, w; + word_type bm; + + if (b == 0) + return u; + + uu.ll = u; + bm = 32 - b; + + if (bm <= 0) { + /* w.s.high = 1..1 or 0..0 */ + w.s.high = + uu.s.high >> 31; + w.s.low = uu.s.high >> -bm; + } else { + const unsigned int carries = (unsigned int) uu.s.high << bm; + + w.s.high = uu.s.high >> b; + w.s.low = ((unsigned int) uu.s.low >> b) | carries; + } + + return w.ll; +} diff --git a/arch/mips/lib/libgcc.h b/arch/mips/lib/libgcc.h new file mode 100644 index 0000000..05909d5 --- /dev/null +++ b/arch/mips/lib/libgcc.h @@ -0,0 +1,25 @@ +#ifndef __ASM_LIBGCC_H +#define __ASM_LIBGCC_H + +#include <asm/byteorder.h> + +typedef int word_type __attribute__ ((mode (__word__))); + +#ifdef __BIG_ENDIAN +struct DWstruct { + int high, low; +}; +#elif defined(__LITTLE_ENDIAN) +struct DWstruct { + int low, high; +}; +#else +#error I feel sick. +#endif + +typedef union { + struct DWstruct s; + long long ll; +} DWunion; + +#endif /* __ASM_LIBGCC_H */ diff --git a/arch/mips/lib/lshrdi3.c b/arch/mips/lib/lshrdi3.c new file mode 100644 index 0000000..bb340ac --- /dev/null +++ b/arch/mips/lib/lshrdi3.c @@ -0,0 +1,25 @@ +#include "libgcc.h" + +long long __lshrdi3(long long u, word_type b) +{ + DWunion uu, w; + word_type bm; + + if (b == 0) + return u; + + uu.ll = u; + bm = 32 - b; + + if (bm <= 0) { + w.s.high = 0; + w.s.low = (unsigned int) uu.s.high >> -bm; + } else { + const unsigned int carries = (unsigned int) uu.s.high << bm; + + w.s.high = (unsigned int) uu.s.high >> b; + w.s.low = ((unsigned int) uu.s.low >> b) | carries; + } + + return w.ll; +} -- 1.7.10.4

4 13

[U-Boot] [PATCH 1/2] tegra: init MMC from common board init
by Lucas Stach 19 Aug '12

19 Aug '12

Signed-off-by: Lucas Stach <dev(a)lynxeye.de> CC: Stephen Warren <swarren(a)wwwdotorg.org> CC: Tom Warren <TWarren(a)nvidia.com> --- board/nvidia/common/board.c | 4 ++++ 1 Datei geändert, 4 Zeilen hinzugefügt(+) diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index 7ab2040..3bd4ff1 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -132,6 +132,10 @@ int board_init(void) board_usb_init(gd->fdt_blob); #endif +#ifdef CONFIG_TEGRA_MMC + board_mmc_init(gd->fdt_blob); +#endif + #ifdef CONFIG_TEGRA20_LP0 /* save Sdram params to PMC 2, 4, and 24 for WB0 */ warmboot_save_sdram_params(); -- 1.7.11.2

2 5

[U-Boot] [PATCH v3] arm: rmobile: Add support Renesas SH73A0
by Nobuhiro Iwamatsu 19 Aug '12

19 Aug '12

Renesas SH73A0 is CPU with Cortex-A9. This supports the basic register definition and GPIO. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj(a)renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu(a)nigauri.org> --- V3: Revert ICCICR. arch/arm/cpu/armv7/rmobile/Makefile | 17 +- arch/arm/cpu/armv7/rmobile/board.c | 33 ++ arch/arm/cpu/armv7/rmobile/cpu_info-sh73a0.c | 50 ++ arch/arm/cpu/armv7/rmobile/cpu_info.c | 36 +- arch/arm/cpu/armv7/rmobile/lowlevel_init.S | 95 ++++ arch/arm/include/asm/arch-rmobile/rmobile.h | 4 + arch/arm/include/asm/arch-rmobile/sh73a0-gpio.h | 553 +++++++++++++++++++++++ arch/arm/include/asm/arch-rmobile/sh73a0.h | 281 ++++++++++++ arch/arm/include/asm/arch-rmobile/sys_proto.h | 29 ++ 9 files changed, 1074 insertions(+), 24 deletions(-) create mode 100644 arch/arm/cpu/armv7/rmobile/board.c create mode 100644 arch/arm/cpu/armv7/rmobile/cpu_info-sh73a0.c create mode 100644 arch/arm/cpu/armv7/rmobile/lowlevel_init.S create mode 100644 arch/arm/include/asm/arch-rmobile/sh73a0-gpio.h create mode 100644 arch/arm/include/asm/arch-rmobile/sh73a0.h create mode 100644 arch/arm/include/asm/arch-rmobile/sys_proto.h diff --git a/arch/arm/cpu/armv7/rmobile/Makefile b/arch/arm/cpu/armv7/rmobile/Makefile index e7eb90f..4becff3 100644 --- a/arch/arm/cpu/armv7/rmobile/Makefile +++ b/arch/arm/cpu/armv7/rmobile/Makefile @@ -25,11 +25,17 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -COBJS += cpu_info.o -COBJS += timer.o +SOBJS = lowlevel_init.o +COBJS-y += board.o +COBJS-y += cpu_info.o +COBJS-y += timer.o -SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS) $(COBJS-y)) +COBJS-$(CONFIG_SH73A0) += cpu_info-sh73a0.o + +COBJS := $(COBJS-y) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) START := $(addprefix $(obj),$(START)) all: $(obj).depend $(LIB) @@ -37,6 +43,9 @@ all: $(obj).depend $(LIB) $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) +clean: + rm -f $(SOBJS) $(OBJS) + ######################################################################### # defines $(obj).depend target diff --git a/arch/arm/cpu/armv7/rmobile/board.c b/arch/arm/cpu/armv7/rmobile/board.c new file mode 100644 index 0000000..55dc6be --- /dev/null +++ b/arch/arm/cpu/armv7/rmobile/board.c @@ -0,0 +1,33 @@ +/* + * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj(a)renesas.com> + * (C) Copyright 2012 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + printf("Board: %s\n", sysinfo.board_string); + return 0; +} +#endif /* CONFIG_DISPLAY_BOARDINFO */ diff --git a/arch/arm/cpu/armv7/rmobile/cpu_info-sh73a0.c b/arch/arm/cpu/armv7/rmobile/cpu_info-sh73a0.c new file mode 100644 index 0000000..f5273cf --- /dev/null +++ b/arch/arm/cpu/armv7/rmobile/cpu_info-sh73a0.c @@ -0,0 +1,50 @@ +/* + * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj(a)renesas.com> + * (C) Copyright 2012 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/io.h> + +#ifdef CONFIG_DISPLAY_CPUINFO +u32 rmobile_get_cpu_type(void) +{ + u32 id; + u32 type; + struct sh73a0_hpb *hpb = (struct sh73a0_hpb *)HPB_BASE; + + id = readl(hpb->cccr); + type = (id >> 8) & 0xFF; + + return type; +} + +u32 get_cpu_rev(void) +{ + u32 id; + u32 rev; + struct sh73a0_hpb *hpb = (struct sh73a0_hpb *)HPB_BASE; + + id = readl(hpb->cccr); + rev = (id >> 4) & 0xF; + + return rev; +} +#endif /* CONFIG_DISPLAY_CPUINFO */ diff --git a/arch/arm/cpu/armv7/rmobile/cpu_info.c b/arch/arm/cpu/armv7/rmobile/cpu_info.c index 789c2c3..2148958 100644 --- a/arch/arm/cpu/armv7/rmobile/cpu_info.c +++ b/arch/arm/cpu/armv7/rmobile/cpu_info.c @@ -22,7 +22,6 @@ */ #include <common.h> #include <asm/io.h> -#include <asm/arch/rmobile.h> #ifdef CONFIG_ARCH_CPU_INIT int arch_cpu_init(void) @@ -40,35 +39,32 @@ void enable_caches(void) #endif #ifdef CONFIG_DISPLAY_CPUINFO -static u32 get_cpu_type(void) +static u32 __rmobile_get_cpu_type(void) { - u32 id; - u32 type; - - id = readl(CCCR); - type = (id >> 8) & 0xFF; - - return type; + return 0x0; } +u32 rmobile_get_cpu_type(void) + __attribute__((weak, alias("__rmobile_get_cpu_type"))); -static u32 get_cpu_rev(void) +static u32 __rmobile_get_cpu_rev(void) { - u32 id; - u32 rev; - - id = readl(CCCR); - rev = (id >> 4) & 0xF; - - return rev; + return 0; } +u32 rmobile_get_cpu_rev(void) + __attribute__((weak, alias("__rmobile_get_cpu_rev"))); int print_cpuinfo(void) { - switch (get_cpu_type()) { + switch (rmobile_get_cpu_type()) { + case 0x37: + printf("CPU: Renesas Electronics SH73A0 rev %d\n", + rmobile_get_cpu_rev()); + break; default: - printf("CPU: Renesas Electronics CPU rev %d\n", get_cpu_rev()); + printf("CPU: Renesas Electronics CPU rev %d\n", + get_cpu_rev()); break; } return 0; } -#endif +#endif /* CONFIG_DISPLAY_CPUINFO */ diff --git a/arch/arm/cpu/armv7/rmobile/lowlevel_init.S b/arch/arm/cpu/armv7/rmobile/lowlevel_init.S new file mode 100644 index 0000000..2cd410b --- /dev/null +++ b/arch/arm/cpu/armv7/rmobile/lowlevel_init.S @@ -0,0 +1,95 @@ +/* + * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.Iwamatsu.yj(a)renesas.com> + * Copyright (C) 2012 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <linux/linkage.h> + +ENTRY(lowlevel_init) + ldr r0, =MERAM_BASE + mov r1, #0x0 + str r1, [r0] + + mrc p15, 0, r0, c0, c0, 5 + ands r0, r0, #0xF + beq lowlevel_init__ + b wait_interrupt + + .pool + .align 4 + +wait_interrupt: + ldr r1, =ICCICR + mov r2, #0x0 + str r2, [r1] + mov r2, #0xF0 + adds r1, r1, #4 /* ICCPMR */ + str r2, [r1] + ldr r1, =ICCICR + mov r2, #0x1 + str r2, [r1] + +wait_loop: + wfi + + ldr r2, [r1, #0xC] + str r2, [r1, #0x10] + + ldr r0, =MERAM_BASE + ldr r2, [r0] + cmp r2, #0 + movne pc, r2 + + b wait_loop + +wait_loop_end: + .pool + .align 4 + +lowlevel_init__: + + mov r0, #0x200000 + +loop0: + subs r0, r0, #1 + bne loop0 + + ldr sp, MERAM_STACK + + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + bl s_init + + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ + + /* back to arch calling code */ + mov pc, lr + + .pool + .align 4 + +ENDPROC(lowlevel_init) + .ltorg + +MERAM_STACK: + .word LOW_LEVEL_MERAM_STACK diff --git a/arch/arm/include/asm/arch-rmobile/rmobile.h b/arch/arm/include/asm/arch-rmobile/rmobile.h index bf5e22a..a3468e9 100644 --- a/arch/arm/include/asm/arch-rmobile/rmobile.h +++ b/arch/arm/include/asm/arch-rmobile/rmobile.h @@ -2,7 +2,11 @@ #define __ASM_ARCH_RMOBILE_H #if defined(CONFIG_RMOBILE) +#if defined(CONFIG_SH73A0) +#include <asm/arch/sh73a0.h> +#else #error "SOC Name not defined" +#endif #endif /* CONFIG_RMOBILE */ #endif /* __ASM_ARCH_RMOBILE_H */ diff --git a/arch/arm/include/asm/arch-rmobile/sh73a0-gpio.h b/arch/arm/include/asm/arch-rmobile/sh73a0-gpio.h new file mode 100644 index 0000000..398e2c1 --- /dev/null +++ b/arch/arm/include/asm/arch-rmobile/sh73a0-gpio.h @@ -0,0 +1,553 @@ +#ifndef __ASM_SH73A0_H__ +#define __ASM_SH73A0_H__ + +/* Pin Function Controller: + * GPIO_FN_xx - GPIO used to select pin function and MSEL switch + * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU + */ +enum { + /* Hardware manual Table 25-1 (GPIO) */ + GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4, + GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9, + + GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14, + GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19, + + GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24, + GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29, + + GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34, + GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39, + + GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44, + GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49, + + GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54, + GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59, + + GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64, + GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69, + + GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74, + GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79, + + GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84, + GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89, + + GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94, + GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99, + + GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104, + GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109, + + GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114, + GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, + + GPIO_PORT128, GPIO_PORT129, + + GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134, + GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139, + + GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144, + GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149, + + GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154, + GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159, + + GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164, + + GPIO_PORT192, GPIO_PORT193, GPIO_PORT194, + GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199, + + GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204, + GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209, + + GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214, + GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219, + + GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224, + GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229, + + GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234, + GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239, + + GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244, + GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249, + + GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254, + GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259, + + GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264, + GPIO_PORT265, GPIO_PORT266, GPIO_PORT267, GPIO_PORT268, GPIO_PORT269, + + GPIO_PORT270, GPIO_PORT271, GPIO_PORT272, GPIO_PORT273, GPIO_PORT274, + GPIO_PORT275, GPIO_PORT276, GPIO_PORT277, GPIO_PORT278, GPIO_PORT279, + + GPIO_PORT280, GPIO_PORT281, GPIO_PORT282, + + GPIO_PORT288, GPIO_PORT289, + + GPIO_PORT290, GPIO_PORT291, GPIO_PORT292, GPIO_PORT293, GPIO_PORT294, + GPIO_PORT295, GPIO_PORT296, GPIO_PORT297, GPIO_PORT298, GPIO_PORT299, + + GPIO_PORT300, GPIO_PORT301, GPIO_PORT302, GPIO_PORT303, GPIO_PORT304, + GPIO_PORT305, GPIO_PORT306, GPIO_PORT307, GPIO_PORT308, GPIO_PORT309, + + /* Table 25-1 (Function 0-7) */ + GPIO_FN_VBUS_0, + GPIO_FN_GPI0, + GPIO_FN_GPI1, + GPIO_FN_GPI2, + GPIO_FN_GPI3, + GPIO_FN_GPI4, + GPIO_FN_GPI5, + GPIO_FN_GPI6, + GPIO_FN_GPI7, + GPIO_FN_SCIFA7_RXD, + GPIO_FN_SCIFA7_CTS_, + GPIO_FN_GPO7, GPIO_FN_MFG0_OUT2, + GPIO_FN_GPO6, GPIO_FN_MFG1_OUT2, + GPIO_FN_GPO5, GPIO_FN_SCIFA0_SCK, GPIO_FN_FSICOSLDT3, \ + GPIO_FN_PORT16_VIO_CKOR, + GPIO_FN_SCIFA0_TXD, + GPIO_FN_SCIFA7_TXD, + GPIO_FN_SCIFA7_RTS_, GPIO_FN_PORT19_VIO_CKO2, + GPIO_FN_GPO0, + GPIO_FN_GPO1, + GPIO_FN_GPO2, GPIO_FN_STATUS0, + GPIO_FN_GPO3, GPIO_FN_STATUS1, + GPIO_FN_GPO4, GPIO_FN_STATUS2, + GPIO_FN_VINT, + GPIO_FN_TCKON, + GPIO_FN_XDVFS1, GPIO_FN_PORT27_I2C_SCL2, GPIO_FN_PORT27_I2C_SCL3, \ + GPIO_FN_MFG0_OUT1, GPIO_FN_PORT27_IROUT, + GPIO_FN_XDVFS2, GPIO_FN_PORT28_I2C_SDA2, GPIO_FN_PORT28_I2C_SDA3, \ + GPIO_FN_PORT28_TPU1TO1, + GPIO_FN_SIM_RST, GPIO_FN_PORT29_TPU1TO1, + GPIO_FN_SIM_CLK, GPIO_FN_PORT30_VIO_CKOR, + GPIO_FN_SIM_D, GPIO_FN_PORT31_IROUT, + GPIO_FN_SCIFA4_TXD, + GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP, + GPIO_FN_SCIFA4_RTS_, + GPIO_FN_SCIFA4_CTS_, + GPIO_FN_FSIBOBT, GPIO_FN_FSIBIBT, + GPIO_FN_FSIBOLR, GPIO_FN_FSIBILR, + GPIO_FN_FSIBOSLD, + GPIO_FN_FSIBISLD, + GPIO_FN_VACK, + GPIO_FN_XTAL1L, + GPIO_FN_SCIFA0_RTS_, GPIO_FN_FSICOSLDT2, + GPIO_FN_SCIFA0_RXD, + GPIO_FN_SCIFA0_CTS_, GPIO_FN_FSICOSLDT1, + GPIO_FN_FSICOBT, GPIO_FN_FSICIBT, GPIO_FN_FSIDOBT, GPIO_FN_FSIDIBT, + GPIO_FN_FSICOLR, GPIO_FN_FSICILR, GPIO_FN_FSIDOLR, GPIO_FN_FSIDILR, + GPIO_FN_FSICOSLD, GPIO_FN_PORT47_FSICSPDIF, + GPIO_FN_FSICISLD, GPIO_FN_FSIDISLD, + GPIO_FN_FSIACK, GPIO_FN_PORT49_IRDA_OUT, GPIO_FN_PORT49_IROUT, \ + GPIO_FN_FSIAOMC, + GPIO_FN_FSIAOLR, GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2, GPIO_FN_FSIAILR, + + GPIO_FN_FSIAOBT, GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3, GPIO_FN_FSIAIBT, + GPIO_FN_FSIAOSLD, GPIO_FN_BBIF2_TXD2, + GPIO_FN_FSIASPDIF, GPIO_FN_PORT53_IRDA_IN, GPIO_FN_TPU3TO3, \ + GPIO_FN_FSIBSPDIF, GPIO_FN_PORT53_FSICSPDIF, + GPIO_FN_FSIBCK, GPIO_FN_PORT54_IRDA_FIRSEL, GPIO_FN_TPU3TO2, \ + GPIO_FN_FSIBOMC, GPIO_FN_FSICCK, GPIO_FN_FSICOMC, + GPIO_FN_FSIAISLD, GPIO_FN_TPU0TO0, + GPIO_FN_A0, GPIO_FN_BS_, + GPIO_FN_A12, GPIO_FN_PORT58_KEYOUT7, GPIO_FN_TPU4TO2, + GPIO_FN_A13, GPIO_FN_PORT59_KEYOUT6, GPIO_FN_TPU0TO1, + GPIO_FN_A14, GPIO_FN_KEYOUT5, + GPIO_FN_A15, GPIO_FN_KEYOUT4, + GPIO_FN_A16, GPIO_FN_KEYOUT3, GPIO_FN_MSIOF0_SS1, + GPIO_FN_A17, GPIO_FN_KEYOUT2, GPIO_FN_MSIOF0_TSYNC, + GPIO_FN_A18, GPIO_FN_KEYOUT1, GPIO_FN_MSIOF0_TSCK, + GPIO_FN_A19, GPIO_FN_KEYOUT0, GPIO_FN_MSIOF0_TXD, + GPIO_FN_A20, GPIO_FN_KEYIN0, GPIO_FN_MSIOF0_RSCK, + GPIO_FN_A21, GPIO_FN_KEYIN1, GPIO_FN_MSIOF0_RSYNC, + GPIO_FN_A22, GPIO_FN_KEYIN2, GPIO_FN_MSIOF0_MCK0, + GPIO_FN_A23, GPIO_FN_KEYIN3, GPIO_FN_MSIOF0_MCK1, + GPIO_FN_A24, GPIO_FN_KEYIN4, GPIO_FN_MSIOF0_RXD, + GPIO_FN_A25, GPIO_FN_KEYIN5, GPIO_FN_MSIOF0_SS2, + GPIO_FN_A26, GPIO_FN_KEYIN6, + GPIO_FN_KEYIN7, + GPIO_FN_D0_NAF0, + GPIO_FN_D1_NAF1, + GPIO_FN_D2_NAF2, + GPIO_FN_D3_NAF3, + GPIO_FN_D4_NAF4, + GPIO_FN_D5_NAF5, + GPIO_FN_D6_NAF6, + GPIO_FN_D7_NAF7, + GPIO_FN_D8_NAF8, + GPIO_FN_D9_NAF9, + GPIO_FN_D10_NAF10, + GPIO_FN_D11_NAF11, + GPIO_FN_D12_NAF12, + GPIO_FN_D13_NAF13, + GPIO_FN_D14_NAF14, + GPIO_FN_D15_NAF15, + GPIO_FN_CS4_, + GPIO_FN_CS5A_, GPIO_FN_PORT91_RDWR, + GPIO_FN_CS5B_, GPIO_FN_FCE1_, + GPIO_FN_CS6B_, GPIO_FN_DACK0, + GPIO_FN_FCE0_, GPIO_FN_CS6A_, + GPIO_FN_WAIT_, GPIO_FN_DREQ0, + GPIO_FN_RD__FSC, + GPIO_FN_WE0__FWE, GPIO_FN_RDWR_FWE, + GPIO_FN_WE1_, + GPIO_FN_FRB, + GPIO_FN_CKO, + GPIO_FN_NBRSTOUT_, + GPIO_FN_NBRST_, + GPIO_FN_BBIF2_TXD, + GPIO_FN_BBIF2_RXD, + GPIO_FN_BBIF2_SYNC, + GPIO_FN_BBIF2_SCK, + GPIO_FN_SCIFA3_CTS_, GPIO_FN_MFG3_IN2, + GPIO_FN_SCIFA3_RXD, GPIO_FN_MFG3_IN1, + GPIO_FN_BBIF1_SS2, GPIO_FN_SCIFA3_RTS_, GPIO_FN_MFG3_OUT1, + GPIO_FN_SCIFA3_TXD, + GPIO_FN_HSI_RX_DATA, GPIO_FN_BBIF1_RXD, + GPIO_FN_HSI_TX_WAKE, GPIO_FN_BBIF1_TSCK, + GPIO_FN_HSI_TX_DATA, GPIO_FN_BBIF1_TSYNC, + GPIO_FN_HSI_TX_READY, GPIO_FN_BBIF1_TXD, + GPIO_FN_HSI_RX_READY, GPIO_FN_BBIF1_RSCK, GPIO_FN_PORT115_I2C_SCL2, \ + GPIO_FN_PORT115_I2C_SCL3, + GPIO_FN_HSI_RX_WAKE, GPIO_FN_BBIF1_RSYNC, GPIO_FN_PORT116_I2C_SDA2, \ + GPIO_FN_PORT116_I2C_SDA3, + GPIO_FN_HSI_RX_FLAG, GPIO_FN_BBIF1_SS1, GPIO_FN_BBIF1_FLOW, + GPIO_FN_HSI_TX_FLAG, + GPIO_FN_VIO_VD, GPIO_FN_PORT128_LCD2VSYN, GPIO_FN_VIO2_VD, \ + GPIO_FN_LCD2D0, + + GPIO_FN_VIO_HD, GPIO_FN_PORT129_LCD2HSYN, GPIO_FN_PORT129_LCD2CS_, \ + GPIO_FN_VIO2_HD, GPIO_FN_LCD2D1, + GPIO_FN_VIO_D0, GPIO_FN_PORT130_MSIOF2_RXD, GPIO_FN_LCD2D10, + GPIO_FN_VIO_D1, GPIO_FN_PORT131_KEYOUT6, GPIO_FN_PORT131_MSIOF2_SS1, \ + GPIO_FN_PORT131_KEYOUT11, GPIO_FN_LCD2D11, + GPIO_FN_VIO_D2, GPIO_FN_PORT132_KEYOUT7, GPIO_FN_PORT132_MSIOF2_SS2, \ + GPIO_FN_PORT132_KEYOUT10, GPIO_FN_LCD2D12, + GPIO_FN_VIO_D3, GPIO_FN_MSIOF2_TSYNC, GPIO_FN_LCD2D13, + GPIO_FN_VIO_D4, GPIO_FN_MSIOF2_TXD, GPIO_FN_LCD2D14, + GPIO_FN_VIO_D5, GPIO_FN_MSIOF2_TSCK, GPIO_FN_LCD2D15, + GPIO_FN_VIO_D6, GPIO_FN_PORT136_KEYOUT8, GPIO_FN_LCD2D16, + GPIO_FN_VIO_D7, GPIO_FN_PORT137_KEYOUT9, GPIO_FN_LCD2D17, + GPIO_FN_VIO_D8, GPIO_FN_PORT138_KEYOUT8, GPIO_FN_VIO2_D0, \ + GPIO_FN_LCD2D6, + GPIO_FN_VIO_D9, GPIO_FN_PORT139_KEYOUT9, GPIO_FN_VIO2_D1, \ + GPIO_FN_LCD2D7, + GPIO_FN_VIO_D10, GPIO_FN_TPU0TO2, GPIO_FN_VIO2_D2, GPIO_FN_LCD2D8, + GPIO_FN_VIO_D11, GPIO_FN_TPU0TO3, GPIO_FN_VIO2_D3, GPIO_FN_LCD2D9, + GPIO_FN_VIO_D12, GPIO_FN_PORT142_KEYOUT10, GPIO_FN_VIO2_D4, \ + GPIO_FN_LCD2D2, + GPIO_FN_VIO_D13, GPIO_FN_PORT143_KEYOUT11, GPIO_FN_PORT143_KEYOUT6, \ + GPIO_FN_VIO2_D5, GPIO_FN_LCD2D3, + GPIO_FN_VIO_D14, GPIO_FN_PORT144_KEYOUT7, GPIO_FN_VIO2_D6, \ + GPIO_FN_LCD2D4, + GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3, GPIO_FN_PORT145_LCD2DISP, \ + GPIO_FN_PORT145_LCD2RS, GPIO_FN_VIO2_D7, GPIO_FN_LCD2D5, + GPIO_FN_VIO_CLK, GPIO_FN_LCD2DCK, GPIO_FN_PORT146_LCD2WR_, \ + GPIO_FN_VIO2_CLK, GPIO_FN_LCD2D18, + GPIO_FN_VIO_FIELD, GPIO_FN_LCD2RD_, GPIO_FN_VIO2_FIELD, GPIO_FN_LCD2D19, + GPIO_FN_VIO_CKO, + GPIO_FN_A27, GPIO_FN_PORT149_RDWR, GPIO_FN_MFG0_IN1, \ + GPIO_FN_PORT149_KEYOUT9, + GPIO_FN_MFG0_IN2, + GPIO_FN_TS_SPSYNC3, GPIO_FN_MSIOF2_RSCK, + GPIO_FN_TS_SDAT3, GPIO_FN_MSIOF2_RSYNC, + GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT153_MSIOF2_SS1, + GPIO_FN_SCIFA2_TXD1, GPIO_FN_MSIOF2_MCK0, + GPIO_FN_SCIFA2_RXD1, GPIO_FN_MSIOF2_MCK1, + GPIO_FN_SCIFA2_RTS1_, GPIO_FN_PORT156_MSIOF2_SS2, + GPIO_FN_SCIFA2_CTS1_, GPIO_FN_PORT157_MSIOF2_RXD, + GPIO_FN_DINT_, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3, + GPIO_FN_PORT159_SCIFB_SCK, GPIO_FN_PORT159_SCIFA5_SCK, GPIO_FN_NMI, + GPIO_FN_PORT160_SCIFB_TXD, GPIO_FN_PORT160_SCIFA5_TXD, + GPIO_FN_PORT161_SCIFB_CTS_, GPIO_FN_PORT161_SCIFA5_CTS_, + GPIO_FN_PORT162_SCIFB_RXD, GPIO_FN_PORT162_SCIFA5_RXD, + GPIO_FN_PORT163_SCIFB_RTS_, GPIO_FN_PORT163_SCIFA5_RTS_, \ + GPIO_FN_TPU3TO0, + GPIO_FN_LCDD0, + GPIO_FN_LCDD1, GPIO_FN_PORT193_SCIFA5_CTS_, GPIO_FN_BBIF2_TSYNC1, + GPIO_FN_LCDD2, GPIO_FN_PORT194_SCIFA5_RTS_, GPIO_FN_BBIF2_TSCK1, + GPIO_FN_LCDD3, GPIO_FN_PORT195_SCIFA5_RXD, GPIO_FN_BBIF2_TXD1, + GPIO_FN_LCDD4, GPIO_FN_PORT196_SCIFA5_TXD, + GPIO_FN_LCDD5, GPIO_FN_PORT197_SCIFA5_SCK, GPIO_FN_MFG2_OUT2, \ + GPIO_FN_TPU2TO1, + GPIO_FN_LCDD6, + GPIO_FN_LCDD7, GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2, + GPIO_FN_LCDD8, GPIO_FN_D16, + GPIO_FN_LCDD9, GPIO_FN_D17, + GPIO_FN_LCDD10, GPIO_FN_D18, + GPIO_FN_LCDD11, GPIO_FN_D19, + GPIO_FN_LCDD12, GPIO_FN_D20, + GPIO_FN_LCDD13, GPIO_FN_D21, + GPIO_FN_LCDD14, GPIO_FN_D22, + GPIO_FN_LCDD15, GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_D23, + GPIO_FN_LCDD16, GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_D24, + GPIO_FN_LCDD17, GPIO_FN_D25, + GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26, + GPIO_FN_LCDD19, GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27, + GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28, + GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29, + GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30, + GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31, + GPIO_FN_LCDDCK, GPIO_FN_LCDWR_, + GPIO_FN_LCDRD_, GPIO_FN_DACK2, GPIO_FN_PORT217_LCD2RS, \ + GPIO_FN_MSIOF0L_TSYNC, GPIO_FN_VIO2_FIELD3, GPIO_FN_PORT217_LCD2DISP, + GPIO_FN_LCDHSYN, GPIO_FN_LCDCS_, GPIO_FN_LCDCS2_, GPIO_FN_DACK3, \ + GPIO_FN_PORT218_VIO_CKOR, + GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_PORT219_LCD2WR_, \ + GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_TSCK, GPIO_FN_VIO2_CLK3, \ + GPIO_FN_LCD2DCK_2, + GPIO_FN_LCDVSYN, GPIO_FN_LCDVSYN2, + GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_PORT221_LCD2CS_, \ + GPIO_FN_PWEN, GPIO_FN_MSIOF0L_RXD, GPIO_FN_VIO2_HD3, \ + GPIO_FN_PORT221_LCD2HSYN, + GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_OVCN, \ + GPIO_FN_MSIOF0L_TXD, GPIO_FN_VIO2_VD3, GPIO_FN_PORT222_LCD2VSYN, + + GPIO_FN_SCIFA1_TXD, GPIO_FN_OVCN2, + GPIO_FN_EXTLP, GPIO_FN_SCIFA1_SCK, GPIO_FN_PORT226_VIO_CKO2, + GPIO_FN_SCIFA1_RTS_, GPIO_FN_IDIN, + GPIO_FN_SCIFA1_RXD, + GPIO_FN_SCIFA1_CTS_, GPIO_FN_MFG1_IN1, + GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA2_TXD2, + GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA2_CTS2_, + GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA2_SCK2, + GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA2_RXD2, + GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA2_RTS2_, GPIO_FN_VIO2_CLK2, \ + GPIO_FN_LCD2D20, + GPIO_FN_MSIOF1_RSYNC, GPIO_FN_MFG1_IN2, GPIO_FN_VIO2_VD2, \ + GPIO_FN_LCD2D21, + GPIO_FN_MSIOF1_MCK0, GPIO_FN_PORT236_I2C_SDA2, + GPIO_FN_MSIOF1_MCK1, GPIO_FN_PORT237_I2C_SCL2, + GPIO_FN_MSIOF1_SS1, GPIO_FN_VIO2_FIELD2, GPIO_FN_LCD2D22, + GPIO_FN_MSIOF1_SS2, GPIO_FN_VIO2_HD2, GPIO_FN_LCD2D23, + GPIO_FN_SCIFA6_TXD, + GPIO_FN_PORT241_IRDA_OUT, GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1, \ + GPIO_FN_TPU4TO0, + GPIO_FN_PORT242_IRDA_IN, GPIO_FN_MFG4_IN2, + GPIO_FN_PORT243_IRDA_FIRSEL, GPIO_FN_PORT243_VIO_CKO2, + GPIO_FN_PORT244_SCIFA5_CTS_, GPIO_FN_MFG2_IN1, \ + GPIO_FN_PORT244_SCIFB_CTS_, GPIO_FN_MSIOF2R_RXD, + GPIO_FN_PORT245_SCIFA5_RTS_, GPIO_FN_MFG2_IN2, \ + GPIO_FN_PORT245_SCIFB_RTS_, GPIO_FN_MSIOF2R_TXD, + GPIO_FN_PORT246_SCIFA5_RXD, GPIO_FN_MFG1_OUT1, \ + GPIO_FN_PORT246_SCIFB_RXD, GPIO_FN_TPU1TO0, + GPIO_FN_PORT247_SCIFA5_TXD, GPIO_FN_MFG3_OUT2, \ + GPIO_FN_PORT247_SCIFB_TXD, GPIO_FN_TPU3TO1, + GPIO_FN_PORT248_SCIFA5_SCK, GPIO_FN_MFG2_OUT1, \ + GPIO_FN_PORT248_SCIFB_SCK, GPIO_FN_TPU2TO0, \ + GPIO_FN_PORT248_I2C_SCL3, GPIO_FN_MSIOF2R_TSCK, + GPIO_FN_PORT249_IROUT, GPIO_FN_MFG4_IN1, \ + GPIO_FN_PORT249_I2C_SDA3, GPIO_FN_MSIOF2R_TSYNC, + GPIO_FN_SDHICLK0, + GPIO_FN_SDHICD0, + GPIO_FN_SDHID0_0, + GPIO_FN_SDHID0_1, + GPIO_FN_SDHID0_2, + GPIO_FN_SDHID0_3, + GPIO_FN_SDHICMD0, + GPIO_FN_SDHIWP0, + GPIO_FN_SDHICLK1, + GPIO_FN_SDHID1_0, GPIO_FN_TS_SPSYNC2, + GPIO_FN_SDHID1_1, GPIO_FN_TS_SDAT2, + GPIO_FN_SDHID1_2, GPIO_FN_TS_SDEN2, + GPIO_FN_SDHID1_3, GPIO_FN_TS_SCK2, + GPIO_FN_SDHICMD1, + GPIO_FN_SDHICLK2, + GPIO_FN_SDHID2_0, GPIO_FN_TS_SPSYNC4, + GPIO_FN_SDHID2_1, GPIO_FN_TS_SDAT4, + GPIO_FN_SDHID2_2, GPIO_FN_TS_SDEN4, + GPIO_FN_SDHID2_3, GPIO_FN_TS_SCK4, + GPIO_FN_SDHICMD2, + GPIO_FN_MMCCLK0, + GPIO_FN_MMCD0_0, + GPIO_FN_MMCD0_1, + GPIO_FN_MMCD0_2, + GPIO_FN_MMCD0_3, + GPIO_FN_MMCD0_4, GPIO_FN_TS_SPSYNC5, + GPIO_FN_MMCD0_5, GPIO_FN_TS_SDAT5, + GPIO_FN_MMCD0_6, GPIO_FN_TS_SDEN5, + GPIO_FN_MMCD0_7, GPIO_FN_TS_SCK5, + GPIO_FN_MMCCMD0, + GPIO_FN_RESETOUTS_, GPIO_FN_EXTAL2OUT, + GPIO_FN_MCP_WAIT__MCP_FRB, + GPIO_FN_MCP_CKO, GPIO_FN_MMCCLK1, + GPIO_FN_MCP_D15_MCP_NAF15, + GPIO_FN_MCP_D14_MCP_NAF14, + GPIO_FN_MCP_D13_MCP_NAF13, + GPIO_FN_MCP_D12_MCP_NAF12, + GPIO_FN_MCP_D11_MCP_NAF11, + GPIO_FN_MCP_D10_MCP_NAF10, + GPIO_FN_MCP_D9_MCP_NAF9, + GPIO_FN_MCP_D8_MCP_NAF8, GPIO_FN_MMCCMD1, + GPIO_FN_MCP_D7_MCP_NAF7, GPIO_FN_MMCD1_7, + + GPIO_FN_MCP_D6_MCP_NAF6, GPIO_FN_MMCD1_6, + GPIO_FN_MCP_D5_MCP_NAF5, GPIO_FN_MMCD1_5, + GPIO_FN_MCP_D4_MCP_NAF4, GPIO_FN_MMCD1_4, + GPIO_FN_MCP_D3_MCP_NAF3, GPIO_FN_MMCD1_3, + GPIO_FN_MCP_D2_MCP_NAF2, GPIO_FN_MMCD1_2, + GPIO_FN_MCP_D1_MCP_NAF1, GPIO_FN_MMCD1_1, + GPIO_FN_MCP_D0_MCP_NAF0, GPIO_FN_MMCD1_0, + GPIO_FN_MCP_NBRSTOUT_, + GPIO_FN_MCP_WE0__MCP_FWE, GPIO_FN_MCP_RDWR_MCP_FWE, + + /* MSEL2 special case */ + GPIO_FN_TSIF2_TS_XX1, + GPIO_FN_TSIF2_TS_XX2, + GPIO_FN_TSIF2_TS_XX3, + GPIO_FN_TSIF2_TS_XX4, + GPIO_FN_TSIF2_TS_XX5, + GPIO_FN_TSIF1_TS_XX1, + GPIO_FN_TSIF1_TS_XX2, + GPIO_FN_TSIF1_TS_XX3, + GPIO_FN_TSIF1_TS_XX4, + GPIO_FN_TSIF1_TS_XX5, + GPIO_FN_TSIF0_TS_XX1, + GPIO_FN_TSIF0_TS_XX2, + GPIO_FN_TSIF0_TS_XX3, + GPIO_FN_TSIF0_TS_XX4, + GPIO_FN_TSIF0_TS_XX5, + GPIO_FN_MST1_TS_XX1, + GPIO_FN_MST1_TS_XX2, + GPIO_FN_MST1_TS_XX3, + GPIO_FN_MST1_TS_XX4, + GPIO_FN_MST1_TS_XX5, + GPIO_FN_MST0_TS_XX1, + GPIO_FN_MST0_TS_XX2, + GPIO_FN_MST0_TS_XX3, + GPIO_FN_MST0_TS_XX4, + GPIO_FN_MST0_TS_XX5, + + /* MSEL3 special cases */ + GPIO_FN_SDHI0_VCCQ_MC0_ON, + GPIO_FN_SDHI0_VCCQ_MC0_OFF, + GPIO_FN_DEBUG_MON_VIO, + GPIO_FN_DEBUG_MON_LCDD, + GPIO_FN_LCDC_LCDC0, + GPIO_FN_LCDC_LCDC1, + + /* MSEL4 special cases */ + GPIO_FN_IRQ9_MEM_INT, + GPIO_FN_IRQ9_MCP_INT, + GPIO_FN_A11, + GPIO_FN_KEYOUT8, + GPIO_FN_TPU4TO3, + GPIO_FN_RESETA_N_PU_ON, + GPIO_FN_RESETA_N_PU_OFF, + GPIO_FN_EDBGREQ_PD, + GPIO_FN_EDBGREQ_PU, + + /* Functions with pull-ups */ + GPIO_FN_KEYIN0_PU, + GPIO_FN_KEYIN1_PU, + GPIO_FN_KEYIN2_PU, + GPIO_FN_KEYIN3_PU, + GPIO_FN_KEYIN4_PU, + GPIO_FN_KEYIN5_PU, + GPIO_FN_KEYIN6_PU, + GPIO_FN_KEYIN7_PU, + GPIO_FN_SDHICD0_PU, + GPIO_FN_SDHID0_0_PU, + GPIO_FN_SDHID0_1_PU, + GPIO_FN_SDHID0_2_PU, + GPIO_FN_SDHID0_3_PU, + GPIO_FN_SDHICMD0_PU, + GPIO_FN_SDHIWP0_PU, + GPIO_FN_SDHID1_0_PU, + GPIO_FN_SDHID1_1_PU, + GPIO_FN_SDHID1_2_PU, + GPIO_FN_SDHID1_3_PU, + GPIO_FN_SDHICMD1_PU, + GPIO_FN_SDHID2_0_PU, + GPIO_FN_SDHID2_1_PU, + GPIO_FN_SDHID2_2_PU, + GPIO_FN_SDHID2_3_PU, + GPIO_FN_SDHICMD2_PU, + GPIO_FN_MMCCMD0_PU, + GPIO_FN_MMCCMD1_PU, + GPIO_FN_MMCD0_0_PU, + GPIO_FN_MMCD0_1_PU, + GPIO_FN_MMCD0_2_PU, + GPIO_FN_MMCD0_3_PU, + GPIO_FN_MMCD0_4_PU, + GPIO_FN_MMCD0_5_PU, + GPIO_FN_MMCD0_6_PU, + GPIO_FN_MMCD0_7_PU, + GPIO_FN_FSIACK_PU, + GPIO_FN_FSIAILR_PU, + GPIO_FN_FSIAIBT_PU, + GPIO_FN_FSIAISLD_PU, + + /* end of GPIO */ + GPIO_NR, +}; + +/* DMA slave IDs */ +enum { + SHDMA_SLAVE_INVALID, + SHDMA_SLAVE_SCIF0_TX, + SHDMA_SLAVE_SCIF0_RX, + SHDMA_SLAVE_SCIF1_TX, + SHDMA_SLAVE_SCIF1_RX, + SHDMA_SLAVE_SCIF2_TX, + SHDMA_SLAVE_SCIF2_RX, + SHDMA_SLAVE_SCIF3_TX, + SHDMA_SLAVE_SCIF3_RX, + SHDMA_SLAVE_SCIF4_TX, + SHDMA_SLAVE_SCIF4_RX, + SHDMA_SLAVE_SCIF5_TX, + SHDMA_SLAVE_SCIF5_RX, + SHDMA_SLAVE_SCIF6_TX, + SHDMA_SLAVE_SCIF6_RX, + SHDMA_SLAVE_SCIF7_TX, + SHDMA_SLAVE_SCIF7_RX, + SHDMA_SLAVE_SCIF8_TX, + SHDMA_SLAVE_SCIF8_RX, + SHDMA_SLAVE_SDHI0_TX, + SHDMA_SLAVE_SDHI0_RX, + SHDMA_SLAVE_SDHI1_TX, + SHDMA_SLAVE_SDHI1_RX, + SHDMA_SLAVE_SDHI2_TX, + SHDMA_SLAVE_SDHI2_RX, + SHDMA_SLAVE_MMCIF_TX, + SHDMA_SLAVE_MMCIF_RX, +}; + +/* + * SH73A0 IRQ LOCATION TABLE + * + * 416 ----------------------------------------- + * IRQ0-IRQ15 + * 431 ----------------------------------------- + * ... + * 448 ----------------------------------------- + * sh73a0-intcs + * sh73a0-intca-irq-pins + * 680 ----------------------------------------- + * ... + * 700 ----------------------------------------- + * sh73a0-pint0 + * 731 ----------------------------------------- + * 732 ----------------------------------------- + * sh73a0-pint1 + * 739 ----------------------------------------- + * ... + * 800 ----------------------------------------- + * IRQ16-IRQ31 + * 815 ----------------------------------------- + * ... + * 928 ----------------------------------------- + * sh73a0-intca-irq-pins + * 943 ----------------------------------------- + */ + +/* PINT interrupts are located at Linux IRQ 700 and up */ +#define SH73A0_PINT0_IRQ(irq) ((irq) + 700) +#define SH73A0_PINT1_IRQ(irq) ((irq) + 732) + +#endif /* __ASM_SH73A0_H__ */ diff --git a/arch/arm/include/asm/arch-rmobile/sh73a0.h b/arch/arm/include/asm/arch-rmobile/sh73a0.h new file mode 100644 index 0000000..c33bf21 --- /dev/null +++ b/arch/arm/include/asm/arch-rmobile/sh73a0.h @@ -0,0 +1,281 @@ +#ifndef __ASM_ARCH_RMOBILE_SH73A0_H +#define __ASM_ARCH_RMOBILE_SH73A0_H + +/* Global Timer */ +#define GLOBAL_TIMER_BASE_ADDR (0xF0000200) +#define MERAM_BASE (0xE5580000) + +/* GIC */ +#define GIC_BASE (0xF0000100) +#define ICCICR GIC_BASE + +/* Secure control register */ +#define LIFEC_SEC_SRC (0xE6110008) + +/* RWDT */ +#define RWDT_BASE (0xE6020000) + +/* HPB Semaphore Control Registers */ +#define HPB_BASE (0xE6001010) + +/* Bus Semaphore Control Registers */ +#define HPBSCR_BASE (0xE6001600) + +/* SBSC1 */ +#define SBSC1_BASE (0xFE400000) +#define SDMRA1A (SBSC1_BASE + 0x100000) +#define SDMRA2A (SBSC1_BASE + 0x1C0000) +#define SDMRA3A (SBSC1_BASE + 0x104000) + +/* SBSC2 */ +#define SBSC2_BASE (0xFB400000) +#define SDMRA1B (SBSC2_BASE + 0x100000) +#define SDMRA2B (SBSC2_BASE + 0x1C0000) +#define SDMRA3B (SBSC2_BASE + 0x104000) + +/* CPG */ +#define CPG_BASE (0xE6150000) +#define CPG_SRCR_BASE (CPG_BASE + 0x80A0) +#define WUPCR (CPG_BASE + 0x1010) +#define SRESCR (CPG_BASE + 0x1018) +#define PCLKCR (CPG_BASE + 0x1020) + +/* BSC */ +#define BSC_BASE (0xFEC10000) + +/* SCIF */ +#define SCIF0_BASE (0xE6C40000) +#define SCIF1_BASE (0xE6C50000) +#define SCIF2_BASE (0xE6C60000) +#define SCIF3_BASE (0xE6C70000) +#define SCIF4_BASE (0xE6C80000) +#define SCIF5_BASE (0xE6CB0000) +#define SCIF6_BASE (0xE6CC0000) +#define SCIF7_BASE (0xE6CD0000) + +#ifndef __ASSEMBLY__ +#include <asm/types.h> + +/* RWDT */ +struct sh73a0_rwdt { + u16 rwtcnt0; /* 0x00 */ + u16 rwtcsra0; /* 0x04 */ + u16 rwtcsrb0; /* 0x08 */ +}; + +/* HPB Semaphore Control Registers */ +struct sh73a0_hpb { + u32 hpbctrl0; + u32 hpbctrl1; + u32 hpbctrl2; + u32 cccr; + u32 dummy0; /* 0x20 */ + u32 hpbctrl4; + u32 hpbctrl5; + u32 dummy1; /* 0x2C */ + u32 hpbctrl6; +}; + +/* Bus Semaphore Control Registers */ +struct sh73a0_hpb_bscr { + u32 mpsrc; /* 0x00 */ + u32 mpacctl; /* 0x04 */ + u32 dummy0[6]; + u32 smgpiosrc; /* 0x20 */ + u32 smgpioerr; + u32 smgpiotime; + u32 smgpiocnt; + u32 dummy1[4]; /* 0x30 .. 0x3C */ + u32 smcmt2src; + u32 smcmt2err; + u32 smcmt2time; + u32 smcmt2cnt; + u32 smcpgsrc; + u32 smcpgerr; + u32 smcpgtime; + u32 smcpgcnt; + u32 dummy2[4]; /* 0x60 - 0x6C */ + u32 smsyscsrc; + u32 smsyscerr; + u32 smsysctime; + u32 smsysccnt; +}; + +/* SBSC */ +struct sh73a0_sbsc { + u32 dummy0[2]; /* 0x00, 0x04 */ + u32 sdcr0; + u32 sdcr1; + u32 sdpcr; + u32 dummy1; /* 0x14 */ + u32 sdcr0s; + u32 sdcr1s; + u32 rtcsr; + u32 dummy2; /* 0x24 */ + u32 rtcor; + u32 rtcorh; + u32 rtcors; + u32 rtcorsh; + u32 dummy3[2]; /* 0x38, 0x3C */ + u32 sdwcrc0; + u32 sdwcrc1; + u32 sdwcr00; + u32 sdwcr01; + u32 sdwcr10; + u32 sdwcr11; + u32 sdpdcr0; + u32 dummy4; /* 0x5C */ + u32 sdwcr2; + u32 sdwcrc2; + u32 zqccr; + u32 dummy5[6]; /* 0x6C .. 0x80 */ + u32 sdmracr0; + u32 dummy6; /* 0x88 */ + u32 sdmrtmpcr; + u32 dummy7; /* 0x90 */ + u32 sdmrtmpmsk; + u32 dummy8; /* 0x98 */ + u32 sdgencnt; + u32 dphycnt0; + u32 dphycnt1; + u32 dphycnt2; + u32 dummy9[2]; /* 0xAC .. 0xB0 */ + u32 sddrvcr0; + u32 dummy10[14]; /* 0xB8 .. 0xEC */ + u32 dptdivcr0; + u32 dptdivcr1; + u32 dptdivcr2; + u32 dummy11; /* 0xFC */ + u32 sdptcr0; + u32 sdptcr1; + u32 sdptcr2; + u32 sdptcr3; /* 0x10C */ + u32 dummy12[145]; /* 0x110 .. 0x350 */ + u32 dllcnt0; /* 0x354 */ + u32 sbscmon0; +}; + +/* CPG */ +struct sh73a0_sbsc_cpg { + u32 frqcra; /* 0x00 */ + u32 frqcrb; + u32 vclkcr1; + u32 vclkcr2; + u32 zbckcr; + u32 flckcr; + u32 fsiackcr; + u32 vclkcr3; + u32 rtstbcr; + u32 systbcr; + u32 pll1cr; + u32 pll2cr; + u32 mstpsr0; + u32 dummy0; /* 0x34 */ + u32 mstpsr1; + u32 mstpsr5; + u32 mstpsr2; + u32 dummy1; /* 0x44 */ + u32 mstpsr3; + u32 mstpsr4; + u32 dummy2; /* 0x50 */ + u32 astat; + u32 dvfscr0; + u32 dvfscr1; + u32 dsitckcr; + u32 dsi0pckcr; + u32 dsi1pckcr; + u32 dsi0phycr; + u32 dsi1phycr; + u32 sd0ckcr; + u32 sd1ckcr; + u32 sd2ckcr; + u32 subckcr; + u32 spuackcr; + u32 msuckcr; + u32 hsickcr; + u32 fsibckcr; + u32 spuvckcr; + u32 mfck1cr; + u32 mfck2cr; + u32 dummy3[8]; /* 0xA0 .. 0xBC */ + u32 ckscr; + u32 dummy4; /* 0xC4 */ + u32 pll1stpcr; + u32 mpmode; + u32 pllecr; + u32 dummy5; /* 0xD4 */ + u32 pll0cr; + u32 pll3cr; + u32 dummy6; /* 0xE0 */ + u32 frqcrd; + u32 dummyi7; /* 0xE8 */ + u32 vrefcr; + u32 pll0stpcr; + u32 dummy8; /* 0xF4 */ + u32 pll2stpcr; + u32 pll3stpcr; + u32 dummy9[4]; /* 0x100 .. 0x10c */ + u32 rmstpcr0; + u32 rmstpcr1; + u32 rmstpcr2; + u32 rmstpcr3; + u32 rmstpcr4; + u32 rmstpcr5; + u32 dummy10[2]; /* 0x128 .. 0x12c */ + u32 smstpcr0; + u32 smstpcr1; + u32 smstpcr2; + u32 smstpcr3; + u32 smstpcr4; + u32 smstpcr5; + u32 dummy11[10]; /* 0x148 .. 0x16c */ + u32 dvfscr2; + u32 dvfscr3; + u32 dvfscr4; + u32 dvfscr5; /* 0x17C */ +}; + +/* CPG SRCR part OK */ +struct sh73a0_sbsc_cpg_srcr { + u32 srcr0; + u32 dummy0; /* 0xA4 */ + u32 srcr1; + u32 dummy1; /* 0xAC */ + u32 srcr2; + u32 dummy2; /* 0xB4 */ + u32 srcr3; + u32 srcr4; + u32 dummy3; /* 0xC0 */ + u32 srcr5; +}; + +/* BSC */ +struct sh73a0_bsc { + u32 cmncr; + u32 cs0bcr; + u32 cs2bcr; + u32 dummy0; /* 0x0C */ + u32 cs4bcr; + u32 cs5abcr; + u32 cs5bbcr; + u32 cs6abcr; + u32 cs6bbcr; + u32 cs0wcr; + u32 cs2wcr; + u32 dummy1; /* 0x2C */ + u32 cs4wcr; + u32 cs5awcr; + u32 cs5bwcr; + u32 cs6awcr; + u32 cs6bwcr; + u32 rbwtcnt; + u32 busycr; + u32 dummy2; /* 0x5c */ + u32 cs7abcr; + u32 cs7awcr; + u32 dummy3[2]; /* 0x68, 0x6C */ + u32 bromtimcr; +}; +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_ARCH_RMOBILE_SH73A0_H */ diff --git a/arch/arm/include/asm/arch-rmobile/sys_proto.h b/arch/arm/include/asm/arch-rmobile/sys_proto.h new file mode 100644 index 0000000..fad4e4e --- /dev/null +++ b/arch/arm/include/asm/arch-rmobile/sys_proto.h @@ -0,0 +1,29 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SYS_PROTO_H_ +#define _SYS_PROTO_H_ + +struct rmobile_sysinfo { + char *board_string; +}; +extern const struct rmobile_sysinfo sysinfo; + +#endif -- 1.7.10

2 2

[U-Boot] [PATCH 1/2] pxa25x: Add UDC registers definitions
by Łukasz Dałek 19 Aug '12

19 Aug '12

Signed-off-by: Łukasz Dałek <luk0104(a)gmail.com> --- arch/arm/include/asm/arch-pxa/regs-usb.h | 160 ++++++++++++++++++++++++++++++ 1 files changed, 160 insertions(+), 0 deletions(-) create mode 100644 arch/arm/include/asm/arch-pxa/regs-usb.h diff --git a/arch/arm/include/asm/arch-pxa/regs-usb.h b/arch/arm/include/asm/arch-pxa/regs-usb.h new file mode 100644 index 0000000..661ffe2 --- /dev/null +++ b/arch/arm/include/asm/arch-pxa/regs-usb.h @@ -0,0 +1,160 @@ +/* + * PXA25x UDC definitions + * + * Copyright (C) Łukasz Dałek <luk0104(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __REGS_USB_H__ +#define __REGS_USB_H__ + +struct pxa25x_udc_regs { + + /* UDC Control Register */ + uint32_t udccr; /* 0x000 */ + uint32_t reserved1; + + /* UDC Control Function Register */ + uint32_t udccfr; /* 0x008 */ + uint32_t reserved2; + + /* UDC Endpoint Control/Status Registers */ + uint32_t udccs[16]; /* 0x010 - 0x04c */ + + /* UDC Interrupt Control/Status Registers */ + uint32_t uicr0; /* 0x050 */ + uint32_t uicr1; /* 0x054 */ + uint32_t usir0; /* 0x058 */ + uint32_t usir1; /* 0x05c */ + + /* UDC Frame Number/Byte Count Registers */ + uint32_t ufnrh; /* 0x060 */ + uint32_t ufnrl; /* 0x064 */ + uint32_t ubcr2; /* 0x068 */ + uint32_t ubcr4; /* 0x06c */ + uint32_t ubcr7; /* 0x070 */ + uint32_t ubcr9; /* 0x074 */ + uint32_t ubcr12; /* 0x078 */ + uint32_t ubcr14; /* 0x07c */ + + /* UDC Endpoint Data Registers */ + uint32_t uddr0; /* 0x080 */ + uint32_t reserved3[7]; + uint32_t uddr5; /* 0x0a0 */ + uint32_t reserved4[7]; + uint32_t uddr10; /* 0x0c0 */ + uint32_t reserved5[7]; + uint32_t uddr15; /* 0x0e0 */ + uint32_t reserved6[7]; + uint32_t uddr1; /* 0x100 */ + uint32_t reserved7[31]; + uint32_t uddr2; /* 0x180 */ + uint32_t reserved8[31]; + uint32_t uddr3; /* 0x200 */ + uint32_t reserved9[127]; + uint32_t uddr4; /* 0x400 */ + uint32_t reserved10[127]; + uint32_t uddr6; /* 0x600 */ + uint32_t reserved11[31]; + uint32_t uddr7; /* 0x680 */ + uint32_t reserved12[31]; + uint32_t uddr8; /* 0x700 */ + uint32_t reserved13[127]; + uint32_t uddr9; /* 0x900 */ + uint32_t reserved14[127]; + uint32_t uddr11; /* 0xb00 */ + uint32_t reserved15[31]; + uint32_t uddr12; /* 0xb80 */ + uint32_t reserved16[31]; + uint32_t uddr13; /* 0xc00 */ + uint32_t reserved17[127]; + uint32_t uddr14; /* 0xe00 */ + +}; + +#define PXA25X_UDC_BASE 0x40600000 + +#define UDCCR_UDE (1 << 0) +#define UDCCR_UDA (1 << 1) +#define UDCCR_RSM (1 << 2) +#define UDCCR_RESIR (1 << 3) +#define UDCCR_SUSIR (1 << 4) +#define UDCCR_SRM (1 << 5) +#define UDCCR_RSTIR (1 << 6) +#define UDCCR_REM (1 << 7) + +/* Bulk IN endpoint 1/6/11 */ +#define UDCCS_BI_TSP (1 << 7) +#define UDCCS_BI_FST (1 << 5) +#define UDCCS_BI_SST (1 << 4) +#define UDCCS_BI_TUR (1 << 3) +#define UDCCS_BI_FTF (1 << 2) +#define UDCCS_BI_TPC (1 << 1) +#define UDCCS_BI_TFS (1 << 0) + +/* Bulk OUT endpoint 2/7/12 */ +#define UDCCS_BO_RSP (1 << 7) +#define UDCCS_BO_RNE (1 << 6) +#define UDCCS_BO_FST (1 << 5) +#define UDCCS_BO_SST (1 << 4) +#define UDCCS_BO_DME (1 << 3) +#define UDCCS_BO_RPC (1 << 1) +#define UDCCS_BO_RFS (1 << 0) + +/* Isochronous OUT endpoint 4/9/14 */ +#define UDCCS_IO_RSP (1 << 7) +#define UDCCS_IO_RNE (1 << 6) +#define UDCCS_IO_DME (1 << 3) +#define UDCCS_IO_ROF (1 << 2) +#define UDCCS_IO_RPC (1 << 1) +#define UDCCS_IO_RFS (1 << 0) + +/* Control endpoint 0 */ +#define UDCCS0_OPR (1 << 0) +#define UDCCS0_IPR (1 << 1) +#define UDCCS0_FTF (1 << 2) +#define UDCCS0_DRWF (1 << 3) +#define UDCCS0_SST (1 << 4) +#define UDCCS0_FST (1 << 5) +#define UDCCS0_RNE (1 << 6) +#define UDCCS0_SA (1 << 7) + +#define UICR0_IM0 (1 << 0) + +#define USIR0_IR0 (1 << 0) +#define USIR0_IR1 (1 << 1) +#define USIR0_IR2 (1 << 2) +#define USIR0_IR3 (1 << 3) +#define USIR0_IR4 (1 << 4) +#define USIR0_IR5 (1 << 5) +#define USIR0_IR6 (1 << 6) +#define USIR0_IR7 (1 << 7) + +#define UDCCFR_AREN (1 << 7) /* ACK response enable (now) */ +#define UDCCFR_ACM (1 << 2) /* ACK control mode (wait for AREN) */ +/* + * Intel(R) PXA255 Processor Specification Update (page 31) + * define new "must be one" bits in UDCCFR + */ +#define UDCCFR_MB1 (0xff & ~(UDCCFR_AREN | UDCCFR_ACM)) + +#define UFNRH_SIR (1 << 7) /* SOF interrupt request */ +#define UFNRH_SIM (1 << 6) /* SOF interrupt mask */ +#define UFNRH_IPE14 (1 << 5) /* ISO packet error, ep14 */ +#define UFNRH_IPE9 (1 << 4) /* ISO packet error, ep9 */ +#define UFNRH_IPE4 (1 << 3) /* ISO packet error, ep4 */ + +#endif /* __REGS_USB_H__ */ -- 1.7.8.6

2 3

[U-Boot] usb_test_unit_ready called every block read - performance
by Jim Shimer 19 Aug '12

19 Aug '12

While tuning ext2load, we found that usb_test_unit_ready was being called every block read. We compared the usb block storage to the scsi block storage cmd_scsi.c, and found that the scsi device was only calling its scsi_setup_test_unit_ready() during scsi_can. It appears that usb_test_unit_ready() really only needs to be called once during usb_stor_scan(), via usb_stor_get_info(). Is there a particular reason usb_test_unit_ready is called for every block read, or do you think its ok to only call during usb_stor_scan()? We're finding this speeds up ext2load quite a bit. Regards, Jim -- *James H Shimer* Motorola Mobility T3-12-HH72 900 Chelmsford Street Lowell MA 08151 978-614-3550

5 15

[U-Boot] U-boot confused - flashing
by Daniel Ścisłowski 19 Aug '12

19 Aug '12

Hi, I use BeagleBoard rev C4. I would like to prepare u-boot from source myself, one of the newest. I tried to build first X-Loader MLO file and then U-Boot 2012.07. But X-Loader didn't loaded u-boot.bin file. I tried many versions and it only worked with some old. Then after many hours I realized that all wiki, books and other tutorials are out of date, U-Boot creates MLO file. So I tried 2012.07 again and it works :). X-Loader(MLO) and U-Boot (img, not bin) were loaded from SD card ( there were other problems later because of missing kernel files... I suppose I need to reconfigure omap3_beagle.h file, true?). Ok, then I wanted to flash NAND and. I tried to do it like on many wiki pages and finally I have "Error: Bad compare! failed " when I run Beagle without SD card. Why? Is it because I should not flash *.img file ? It can be only *.bin file (I have never seen on any page flashing img) ? But X-loader want *.img file... Other question is, do I need new U-Boot? What are the advantages of using that new version of software? If old loads kernel and then kernel rules and bootloaders are not important... Maybe old can not deal with new kernels?

1 0

[U-Boot] [PATCH] powerpc/p1_p2_rdb_pc: print -PC suffix in board name
by Scott Wood 18 Aug '12

18 Aug '12

Currently the -PC variants of the P1/P2 RDB boards do not print it on boot -- e.g. a P2020RDB-PC will claim to be a plain P2020RDB. Besides being incorrect, this can confuse a user into building U-Boot for P2020RDB rather than P2020RDB-PC, resulting in a board that does not boot. P1024RDB and P1025RDB are not included, as these boards apparently do not have -PC as part of their name, even though they are supported by p1_p2_rdb_pc. Signed-off-by: Scott Wood <scottwood(a)freescale.com> --- include/configs/p1_p2_rdb_pc.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index a8882d4..58af3a5 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -31,7 +31,7 @@ #endif #if defined(CONFIG_P1020MBG) -#define CONFIG_BOARDNAME "P1020MBG" +#define CONFIG_BOARDNAME "P1020MBG-PC" #define CONFIG_P1020 #define CONFIG_VSC7385_ENET #define CONFIG_SLIC @@ -41,7 +41,7 @@ #endif #if defined(CONFIG_P1020UTM) -#define CONFIG_BOARDNAME "P1020UTM" +#define CONFIG_BOARDNAME "P1020UTM-PC" #define CONFIG_P1020 #define __SW_BOOT_MASK 0x03 #define __SW_BOOT_NOR 0xe0 @@ -49,7 +49,7 @@ #endif #if defined(CONFIG_P1020RDB) -#define CONFIG_BOARDNAME "P1020RDB" +#define CONFIG_BOARDNAME "P1020RDB-PC" #define CONFIG_NAND_FSL_ELBC #define CONFIG_P1020 #define CONFIG_SPI_FLASH @@ -64,7 +64,7 @@ #endif #if defined(CONFIG_P1021RDB) -#define CONFIG_BOARDNAME "P1021RDB" +#define CONFIG_BOARDNAME "P1021RDB-PC" #define CONFIG_NAND_FSL_ELBC #define CONFIG_P1021 #define CONFIG_QE @@ -111,7 +111,7 @@ #endif #if defined(CONFIG_P2020RDB) -#define CONFIG_BOARDNAME "P2020RDB" +#define CONFIG_BOARDNAME "P2020RDB-PC" #define CONFIG_NAND_FSL_ELBC #define CONFIG_P2020 #define CONFIG_SPI_FLASH -- 1.7.9.5

1 0

[U-Boot] patman feature request
by Tom Rini 18 Aug '12

18 Aug '12

Hey, It looks like today was the day that Joe and I both decided to give patman a whirl. On IRC we both hit the same annoyance of commits like: "Cosmetic: Something" causing patman to look for a maintainer for cosmetic and failing fatally. Could we please make maintainer alias not found a warning and not a fatal error (so the human can go "oh, that's not a real area, that's fine" ? My ~/.patman is almost more fixups than real aliases. -- Tom

3 3

[U-Boot] [PATCH] patman: Do not Cc addresses included in To list
by Otavio Salvador 18 Aug '12

18 Aug '12

In case an address is listed in the To list, those will be skipped on Cc list or user might end with a duplicated message. This fixes the case when a tag points to same address used as series destination thus avoiding duplicated sending. Signed-off-by: Otavio Salvador <otavio(a)ossystems.com.br> --- Changes in v2: - use if 'to' in self: to remove the try block tools/patman/series.py | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tools/patman/series.py b/tools/patman/series.py index eda1e9b..663990b 100644 --- a/tools/patman/series.py +++ b/tools/patman/series.py @@ -114,6 +114,10 @@ class Series(dict): cc_list += gitutil.BuildEmailList(commit.tags) cc_list += gitutil.BuildEmailList(commit.cc_list) + # Skip items in To list + if 'to' in self: + map(cc_list.remove, gitutil.BuildEmailList(self.to)) + for email in cc_list: if email == None: email = col.Color(col.YELLOW, "<alias '%s' not found>" -- 1.7.10.4

1 0