August 2012 - U-Boot

[U-Boot] [PATCH] mx5: add iomux-mx51.h include
by Matt Sealey 20 Aug '12

20 Aug '12

Essentially now we can share code with the MX6 boards, reducing redundant pin definitions across boards and lengthy configuration of external pads on the i.MX51. Signed-off-by: Matt Sealey <matt(a)genesi-usa.com> --- arch/arm/include/asm/arch-mx5/iomux-mx51.h | 144 ++++++++++++++++++++++++++++ 1 file changed, 144 insertions(+) create mode 100644 arch/arm/include/asm/arch-mx5/iomux-mx51.h diff --git a/arch/arm/include/asm/arch-mx5/iomux-mx51.h b/arch/arm/include/asm/arch-mx5/iomux-mx51.h new file mode 100644 index 0000000..f944c13 --- /dev/null +++ b/arch/arm/include/asm/arch-mx5/iomux-mx51.h @@ -0,0 +1,144 @@ +/* + * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria(a)canonical.com> + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * Copyright (C) 2009-2012 Genesi USA, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __IOMUX_MX51_H__ +#define __IOMUX_MX51_H__ + +#include <asm/imx-common/iomux-v3.h> + +#define PAD_CTL_DVS (1 << 13) +#define PAD_CTL_INPUT_DDR (1 << 9) +#define PAD_CTL_HYS (1 << 8) + +#define PAD_CTL_PKE (1 << 7) +#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE) +#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE) + +#define PAD_CTL_ODE (1 << 3) + +#define PAD_CTL_DSE_LOW (0 << 1) +#define PAD_CTL_DSE_MED (1 << 1) +#define PAD_CTL_DSE_HIGH (2 << 1) +#define PAD_CTL_DSE_MAX (3 << 1) + +#define PAD_CTL_SRE_FAST (1 << 0) +#define PAD_CTL_SRE_SLOW (0 << 0) + +/* Pad control groupings */ +#define MX51_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_HYS | PAD_CTL_SRE_FAST) +#define MX51_I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \ + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \ + PAD_CTL_HYS) +#define MX51_ESDHC_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \ + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \ + PAD_CTL_HYS) +#define MX51_USBH1_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_SRE_FAST | \ + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \ + PAD_CTL_HYS | PAD_CTL_PUE) +#define MX51_ECSPI_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_HYS | \ + PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST) +#define MX51_SDHCI_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_47K_UP | PAD_CTL_PUE | \ + PAD_CTL_SRE_FAST | PAD_CTL_DVS) +#define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | PAD_CTL_SRE_FAST) + +#define __NA_ 0x000 + +/* + * this is in imx-regs.h for i.MX6 but it probably should be in + * imx-common/iomux-v3.h - however, since we're trying to be + * compatible with all the other boards using this include, and + * i.MX6 has this defined in arch-mx5/imx_regs.h we don't want + * to create a build breakage or even just a warning at this time. + * + * So, we can move it to imx-common/iomux-v3.h when this is all + * figured out, and all i.MX5+ boards use the common iomux-v3 + * functionality, but until then it's needlessly duplicated here. + */ +#define GPIO_NUMBER(port, index) ((((port)-1)*32)+((index)&31)) + +/* + * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named GPIO<unit>_<num> + * See also iomux-v3.h + */ + +/* PAD MUX ALT INPSE PATH PADCTRL */ +enum { + MX51_PAD_EIM_CS0__GPIO2_25 = IOMUX_PAD(0x474, 0x0e0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_EIM_CS2__SD1_CD = IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL), + MX51_PAD_EIM_CS3__GPIO2_28 = IOMUX_PAD(0x480, 0x0ec, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_EIM_CS4__GPIO2_29 = IOMUX_PAD(0x484, 0x0f0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_NANDF_WE_B__PATA_DIOW = IOMUX_PAD(0x4e4, 0x108, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_RE_B__PATA_DIOR = IOMUX_PAD(0x4e8, 0x10c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_ALE__PATA_BUFFER_EN = IOMUX_PAD(0x4ec, 0x110, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CLE__PATA_RESET_B = IOMUX_PAD(0x4f0, 0x114, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_WP_B__PATA_DMACK = IOMUX_PAD(0x4f4, 0x118, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_RB0__PATA_DMARQ = IOMUX_PAD(0x4f8, 0x11c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_RB1__PATA_IORDY = IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_GPIO_NAND__PATA_INTRQ = IOMUX_PAD(0x514, 0x12c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS2__PATA_CS_0 = IOMUX_PAD(0x520, 0x138, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS3__PATA_CS_1 = IOMUX_PAD(0x524, 0x13c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS4__PATA_DA_0 = IOMUX_PAD(0x528, 0x140, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS5__PATA_DA_1 = IOMUX_PAD(0x52c, 0x144, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS6__PATA_DA_2 = IOMUX_PAD(0x530, 0x148, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D15__PATA_DATA15 = IOMUX_PAD(0x53c, 0x154, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D14__PATA_DATA14 = IOMUX_PAD(0x540, 0x158, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D13__PATA_DATA13 = IOMUX_PAD(0x544, 0x15c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D12__PATA_DATA12 = IOMUX_PAD(0x548, 0x160, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D11__PATA_DATA11 = IOMUX_PAD(0x54c, 0x164, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D10__PATA_DATA10 = IOMUX_PAD(0x550, 0x168, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D9__PATA_DATA9 = IOMUX_PAD(0x554, 0x16c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D8__PATA_DATA8 = IOMUX_PAD(0x558, 0x170, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D7__PATA_DATA7 = IOMUX_PAD(0x55c, 0x174, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D6__PATA_DATA6 = IOMUX_PAD(0x560, 0x178, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D5__PATA_DATA5 = IOMUX_PAD(0x564, 0x17c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D4__PATA_DATA4 = IOMUX_PAD(0x568, 0x180, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D3__PATA_DATA3 = IOMUX_PAD(0x56c, 0x184, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D2__PATA_DATA2 = IOMUX_PAD(0x570, 0x188, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D1__PATA_DATA1 = IOMUX_PAD(0x574, 0x18c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D0__PATA_DATA0 = IOMUX_PAD(0x578, 0x190, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI = IOMUX_PAD(0x600, 0x210, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL), + MX51_PAD_CSPI1_MISO__ECSPI1_MISO = IOMUX_PAD(0x604, 0x214, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL), + MX51_PAD_CSPI1_SS0__GPIO4_24 = IOMUX_PAD(0x608, 0x218, 3, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_CSPI1_SS1__GPIO4_25 = IOMUX_PAD(0x60c, 0x21c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK = IOMUX_PAD(0x614, 0x224, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL), + MX51_PAD_UART1_RXD__UART1_RXD = IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART_PAD_CTRL), + MX51_PAD_UART1_TXD__UART1_TXD = IOMUX_PAD(0x61c, 0x22c, 0, __NA_, 0, MX51_UART_PAD_CTRL), + MX51_PAD_UART1_RTS__UART1_RTS = IOMUX_PAD(0x620, 0x230, 0, 0x9e0, 0, MX51_UART_PAD_CTRL), + MX51_PAD_UART1_CTS__UART1_CTS = IOMUX_PAD(0x624, 0x234, 0, __NA_, 0, MX51_UART_PAD_CTRL), + MX51_PAD_SD1_CMD__SD1_CMD = IOMUX_PAD(0x79c, 0x394, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD1_CLK__SD1_CLK = IOMUX_PAD(0x7a0, 0x398, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS), + MX51_PAD_SD1_DATA0__SD1_DATA0 = IOMUX_PAD(0x7a4, 0x39c, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD1_DATA1__SD1_DATA1 = IOMUX_PAD(0x7a8, 0x3a0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD1_DATA2__SD1_DATA2 = IOMUX_PAD(0x7ac, 0x3a4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD1_DATA3__SD1_DATA3 = IOMUX_PAD(0x7b0, 0x3a8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_GPIO1_0__SD1_CD = IOMUX_PAD(0x7b4, 0x3ac, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL), + MX51_PAD_GPIO1_1__SD1_WP = IOMUX_PAD(0x7b8, 0x3b0, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL), + MX51_PAD_SD2_CMD__SD2_CMD = IOMUX_PAD(0x7bc, 0x3b4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD2_CLK__SD2_CLK = IOMUX_PAD(0x7c0, 0x3b8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS), + MX51_PAD_SD2_DATA0__SD2_DATA0 = IOMUX_PAD(0x7c4, 0x3bc, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD2_DATA1__SD2_DATA1 = IOMUX_PAD(0x7c8, 0x3c0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD2_DATA2__SD2_DATA2 = IOMUX_PAD(0x7cc, 0x3c4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD2_DATA3__SD2_DATA3 = IOMUX_PAD(0x7d0, 0x3c8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_GPIO1_3__GPIO1_3 = IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_GPIO1_6__GPIO1_6 = IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_GPIO1_7__SD2_WP = IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL), + MX51_PAD_GPIO1_8__SD2_CD = IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL), +}; + +#endif /* __IOMUX_MX51_H__ */ -- 1.7.9.5

5 10

[U-Boot] [PATCH] usb: fix ulpi_set_vbus prototype
by Lucas Stach 20 Aug '12

20 Aug '12

Match the name of the header prototype with the actual implementation. Signed-off-by: Lucas Stach <dev(a)lynxeye.de> --- include/usb/ulpi.h | 2 +- 1 Datei geändert, 1 Zeile hinzugefügt(+), 1 Zeile entfernt(-) diff --git a/include/usb/ulpi.h b/include/usb/ulpi.h index 4a23fd2..9a75c24 100644 --- a/include/usb/ulpi.h +++ b/include/usb/ulpi.h @@ -61,7 +61,7 @@ int ulpi_select_transceiver(struct ulpi_viewport *ulpi_vp, unsigned speed); * * returns 0 on success, ULPI_ERROR on failure. */ -int ulpi_enable_vbus(struct ulpi_viewport *ulpi_vp, +int ulpi_set_vbus(struct ulpi_viewport *ulpi_vp, int on, int ext_power, int ext_ind); /* -- 1.7.11.4

3 3

[U-Boot] [PATCH 1/2] mx28evk: Remove unneeded 'undef'
by Fabio Estevam 20 Aug '12

20 Aug '12

From: Fabio Estevam <fabio.estevam(a)freescale.com> There is no need to undef an option that is not enabled by default. Signed-off-by: Fabio Estevam <fabio.estevam(a)freescale.com> --- include/configs/mx28evk.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 4e70617..b677e51 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -215,7 +215,6 @@ #define CONFIG_SF_DEFAULT_SPEED 24000000 /* (redundant) environemnt in SPI flash */ -#undef CONFIG_ENV_IS_IN_SPI_FLASH #ifdef CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_SYS_REDUNDAND_ENVIRONMENT #define CONFIG_ENV_SIZE 0x1000 /* 4KB */ -- 1.7.9.5

4 10

[U-Boot] [PATCH v2 1/2] MX28: config: Allow different target generation in elftosb call
by Otavio Salvador 20 Aug '12

20 Aug '12

The elftosb call needs to use a target param specific for i.MX28. This patch allow for later addition of i.MX233. Signed-off-by: Otavio Salvador <otavio(a)ossystems.com.br> --- Changes in v2: - fix Makefile according - move u-boot.bd to u-boot-imx28.bd Makefile | 5 ++++- arch/arm/cpu/arm926ejs/mxs/{u-boot.bd => u-boot-imx28.bd} | 0 2 files changed, 4 insertions(+), 1 deletion(-) rename arch/arm/cpu/arm926ejs/mxs/{u-boot.bd => u-boot-imx28.bd} (100%) diff --git a/Makefile b/Makefile index f6471e2..1df4c1d 100644 --- a/Makefile +++ b/Makefile @@ -452,8 +452,11 @@ $(obj)u-boot.ais: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.bin > \ $(obj)u-boot.ais +# Specify the target for use in elftosb call +ELFTOSB_TARGET-$(CONFIG_MX28) = imx28 + $(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin - elftosb -zdf imx28 -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot.bd \ + elftosb -zdf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \ -o $(obj)u-boot.sb # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL. diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot.bd b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd similarity index 100% rename from arch/arm/cpu/arm926ejs/mxs/u-boot.bd rename to arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd -- 1.7.10.4

5 10

[U-Boot] [PATCH] mx5/6: Fix cpu_mmc_init() return value
by Benoît Thébaudeau 20 Aug '12

20 Aug '12

Do not pretend to have initialized mmc successfully if CONFIG_FSL_ESDHC is not defined. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau(a)advansee.com> Cc: Stefano Babic <sbabic(a)denx.de> --- .../arch/arm/cpu/armv7/imx-common/cpu.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git u-boot-4d3c95f.orig/arch/arm/cpu/armv7/imx-common/cpu.c u-boot-4d3c95f/arch/arm/cpu/armv7/imx-common/cpu.c index b3195dd..e736e9a 100644 --- u-boot-4d3c95f.orig/arch/arm/cpu/armv7/imx-common/cpu.c +++ u-boot-4d3c95f/arch/arm/cpu/armv7/imx-common/cpu.c @@ -117,11 +117,13 @@ int cpu_eth_init(bd_t *bis) */ int cpu_mmc_init(bd_t *bis) { + int rc = -ENODEV; + #ifdef CONFIG_FSL_ESDHC - return fsl_esdhc_mmc_init(bis); -#else - return 0; + rc = fsl_esdhc_mmc_init(bis); #endif + + return rc; } void reset_cpu(ulong addr)

2 5

[U-Boot] [PATCH 1/2] spi: fix mxc_spi_slave structure allocation to clear memory
by Matt Sealey 20 Aug '12

20 Aug '12

Use calloc() instead of malloc() to allocate the mxc_spi_slave structure. Clearing the memory is necessary since most of the time this gets done super early in boot, but on warm reboots, and when SPI probing is done long after the init stages it could actually pick up previously used memory, and things like the chipselect polarity and other data end up being filled with trash data if not explicitly set by the board files. This solves a semi-random, almost unreproducable error whereby SPI devices act very, very strangly on boot. Tested on Efika MX over several years.. Signed-off-by: Matt Sealey <matt(a)genesi-usa.com> --- drivers/spi/mxc_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index 2e15318..d1dab18 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -408,7 +408,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (bus >= ARRAY_SIZE(spi_bases)) return NULL; - mxcs = malloc(sizeof(struct mxc_spi_slave)); + mxcs = calloc(sizeof(struct mxc_spi_slave), 1); if (!mxcs) { puts("mxc_spi: SPI Slave not allocated !\n"); return NULL; -- 1.7.9.5

3 5

[U-Boot] [PATCH V4 1/3] imx-common/cmd_bmode.c: add imx bmode (bootmode) command
by Troy Kisky 20 Aug '12

20 Aug '12

This is useful for forcing the ROM's usb downloader to activate upon a watchdog reset. Or, you can boot from either SD Card. Currently, support added for MX53 and MX6Q Signed-off-by: Troy Kisky <troy.kisky(a)boundarydevices.com> Note: MX53 support untested. --- v4: replaced some occurrances of reset s/reset/boot/ or s/reset/b/ renamed files only bmode command now, added noreset argument. add static keywords --- arch/arm/cpu/armv7/imx-common/Makefile | 1 + arch/arm/cpu/armv7/imx-common/cmd_bmode.c | 119 +++++++++++++++++++++++++++ arch/arm/cpu/armv7/mx5/soc.c | 31 +++++++ arch/arm/cpu/armv7/mx6/soc.c | 36 ++++++++ arch/arm/include/asm/arch-mx5/imx-regs.h | 18 ++++ arch/arm/include/asm/arch-mx6/imx-regs.h | 21 +++++ arch/arm/include/asm/imx-common/boot_mode.h | 36 ++++++++ 7 files changed, 262 insertions(+) create mode 100644 arch/arm/cpu/armv7/imx-common/cmd_bmode.c create mode 100644 arch/arm/include/asm/imx-common/boot_mode.h diff --git a/arch/arm/cpu/armv7/imx-common/Makefile b/arch/arm/cpu/armv7/imx-common/Makefile index bf36be5..16fba8d 100644 --- a/arch/arm/cpu/armv7/imx-common/Makefile +++ b/arch/arm/cpu/armv7/imx-common/Makefile @@ -29,6 +29,7 @@ LIB = $(obj)libimx-common.o COBJS-y = iomux-v3.o timer.o cpu.o speed.o COBJS-$(CONFIG_I2C_MXC) += i2c.o +COBJS-$(CONFIG_CMD_BMODE) += cmd_bmode.o COBJS := $(sort $(COBJS-y)) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/arch/arm/cpu/armv7/imx-common/cmd_bmode.c b/arch/arm/cpu/armv7/imx-common/cmd_bmode.c new file mode 100644 index 0000000..02fe72e --- /dev/null +++ b/arch/arm/cpu/armv7/imx-common/cmd_bmode.c @@ -0,0 +1,119 @@ +/* + * Copyright (C) 2012 Boundary Devices Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/imx-common/boot_mode.h> +#include <malloc.h> + +static const struct boot_mode *modes[2]; + +static const struct boot_mode *search_modes(char *arg) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(modes); i++) { + const struct boot_mode *p = modes[i]; + if (p) { + while (p->name) { + if (!strcmp(p->name, arg)) + return p; + p++; + } + } + } + return NULL; +} + +static int create_usage(char *dest) +{ + int i; + int size = 0; + + for (i = 0; i < ARRAY_SIZE(modes); i++) { + const struct boot_mode *p = modes[i]; + if (p) { + while (p->name) { + int len = strlen(p->name); + if (dest) { + memcpy(dest, p->name, len); + dest += len; + *dest++ = '|'; + } + size += len + 1; + p++; + } + } + } + if (dest) + memcpy(dest - 1, " [noreset]", 11); /* include trailing 0 */ + size += 10; + return size; +} + +static int do_boot_mode(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + const struct boot_mode *p; + int reset_requested = 1; + + if (argc < 2) + return CMD_RET_USAGE; + p = search_modes(argv[1]); + if (!p) + return CMD_RET_USAGE; + if (argc == 3) { + if (strcmp(argv[2], "noreset")) + return CMD_RET_USAGE; + reset_requested = 0; + } + + boot_mode_apply(p->cfg_val); + if (reset_requested && p->cfg_val) + do_reset(NULL, 0, 0, NULL); + return 0; +} + +U_BOOT_CMD( + bmode, 3, 0, do_boot_mode, + NULL, + ""); + +void add_board_boot_modes(const struct boot_mode *p) +{ + int size; + char *dest; + + if (__u_boot_cmd_bmode.usage) { + free(__u_boot_cmd_bmode.usage); + __u_boot_cmd_bmode.usage = NULL; + } + + modes[0] = p; + modes[1] = soc_boot_modes; + size = create_usage(NULL); + dest = malloc(size); + if (dest) { + create_usage(dest); + __u_boot_cmd_bmode.usage = dest; + } +} diff --git a/arch/arm/cpu/armv7/mx5/soc.c b/arch/arm/cpu/armv7/mx5/soc.c index 3f5a4f7..d9ca88a 100644 --- a/arch/arm/cpu/armv7/mx5/soc.c +++ b/arch/arm/cpu/armv7/mx5/soc.c @@ -30,6 +30,7 @@ #include <asm/errno.h> #include <asm/io.h> +#include <asm/imx-common/boot_mode.h> #if !(defined(CONFIG_MX51) || defined(CONFIG_MX53)) #error "CPU_TYPE not defined" @@ -115,3 +116,33 @@ void set_chipselect_size(int const cs_size) writel(reg, &iomuxc_regs->gpr1); } + +#ifdef CONFIG_MX53 +void boot_mode_apply(unsigned cfg_val) +{ + writel(cfg_val, &((struct srtc_regs *)SRTC_BASE_ADDR)->lpgr); +} +/* + * cfg_val will be used for + * Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0] + * + * If bit 28 of LPGR is set upon watchdog reset, + * bits[25:0] of LPGR will move to SBMR. + */ +const struct boot_mode soc_boot_modes[] = { + {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)}, + /* usb or serial download */ + {"usb", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x13)}, + {"sata", MAKE_CFGVAL(0x28, 0x00, 0x00, 0x12)}, + {"escpi1:0", MAKE_CFGVAL(0x38, 0x20, 0x00, 0x12)}, + {"escpi1:1", MAKE_CFGVAL(0x38, 0x20, 0x04, 0x12)}, + {"escpi1:2", MAKE_CFGVAL(0x38, 0x20, 0x08, 0x12)}, + {"escpi1:3", MAKE_CFGVAL(0x38, 0x20, 0x0c, 0x12)}, + /* 4 bit bus width */ + {"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x12)}, + {"esdhc2", MAKE_CFGVAL(0x40, 0x20, 0x08, 0x12)}, + {"esdhc3", MAKE_CFGVAL(0x40, 0x20, 0x10, 0x12)}, + {"esdhc4", MAKE_CFGVAL(0x40, 0x20, 0x18, 0x12)}, + {NULL, 0}, +}; +#endif diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 84b458c..7380ffe 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -29,6 +29,7 @@ #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> +#include <asm/imx-common/boot_mode.h> u32 get_cpu_rev(void) { @@ -141,3 +142,38 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) } #endif + +void boot_mode_apply(unsigned cfg_val) +{ + unsigned reg; + struct src_regs *psrc = (struct src_regs *)SRC_BASE_ADDR; + writel(cfg_val, &psrc->gpr9); + reg = readl(&psrc->gpr10); + if (cfg_val) + reg |= 1 << 28; + else + reg &= ~(1 << 28); + writel(reg, &psrc->gpr10); +} +/* + * cfg_val will be used for + * Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0] + * After reset, if GPR10[28] is 1, ROM will copy GPR9[25:0] + * to SBMR1, which will determine the boot device. + */ +const struct boot_mode soc_boot_modes[] = { + {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)}, + /* reserved value should start rom usb */ + {"usb", MAKE_CFGVAL(0x01, 0x00, 0x00, 0x00)}, + {"sata", MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)}, + {"escpi1:0", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x08)}, + {"escpi1:1", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)}, + {"escpi1:2", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x28)}, + {"escpi1:3", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x38)}, + /* 4 bit bus width */ + {"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)}, + {"esdhc2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)}, + {"esdhc3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, + {"esdhc4", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, + {NULL, 0}, +}; diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index 7f66b61..c53465f 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -459,6 +459,24 @@ struct src { u32 simr; }; +struct srtc_regs { + u32 lpscmr; /* 0x00 */ + u32 lpsclr; /* 0x04 */ + u32 lpsar; /* 0x08 */ + u32 lpsmcr; /* 0x0c */ + u32 lpcr; /* 0x10 */ + u32 lpsr; /* 0x14 */ + u32 lppdr; /* 0x18 */ + u32 lpgr; /* 0x1c */ + u32 hpcmr; /* 0x20 */ + u32 hpclr; /* 0x24 */ + u32 hpamr; /* 0x28 */ + u32 hpalr; /* 0x2c */ + u32 hpcr; /* 0x30 */ + u32 hpisr; /* 0x34 */ + u32 hpienr; /* 0x38 */ +}; + /* CSPI registers */ struct cspi_regs { u32 rxdata; diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 5d77603..dacb9ea 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -448,5 +448,26 @@ struct iomuxc_base_regs { u32 daisy[104]; /* 0x7b0..94c */ }; +struct src_regs { + u32 scr; /* 0x00 */ + u32 sbmr1; /* 0x04 */ + u32 srsr; /* 0x08 */ + u32 reserved1; /* 0x0c */ + u32 reserved2; /* 0x10 */ + u32 sisr; /* 0x14 */ + u32 simr; /* 0x18 */ + u32 sbmr2; /* 0x1c */ + u32 gpr1; /* 0x20 */ + u32 gpr2; /* 0x24 */ + u32 gpr3; /* 0x28 */ + u32 gpr4; /* 0x2c */ + u32 gpr5; /* 0x30 */ + u32 gpr6; /* 0x34 */ + u32 gpr7; /* 0x38 */ + u32 gpr8; /* 0x3c */ + u32 gpr9; /* 0x40 */ + u32 gpr10; /* 0x44 */ +}; + #endif /* __ASSEMBLER__*/ #endif /* __ASM_ARCH_MX6_IMX_REGS_H__ */ diff --git a/arch/arm/include/asm/imx-common/boot_mode.h b/arch/arm/include/asm/imx-common/boot_mode.h new file mode 100644 index 0000000..6d2df74 --- /dev/null +++ b/arch/arm/include/asm/imx-common/boot_mode.h @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2012 Boundary Devices Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ASM_BOOT_MODE_H +#define _ASM_BOOT_MODE_H +#define MAKE_CFGVAL(cfg1, cfg2, cfg3, cfg4) \ + ((cfg4) << 24) | ((cfg3) << 16) | ((cfg2) << 8) | (cfg1) + +struct boot_mode { + const char *name; + unsigned cfg_val; +}; + +void add_board_boot_modes(const struct boot_mode *p); +void boot_mode_apply(unsigned cfg_val); +extern const struct boot_mode soc_boot_modes[]; +#endif -- 1.7.9.5

2 4

[U-Boot] [PATCH 1/1] iomux: move IOMUX_GPR13_xxx defines
by Troy Kisky 20 Aug '12

20 Aug '12

Move mx6 specific defines to arch-mx6 directory. Signed-off-by: Troy Kisky <troy.kisky(a)boundarydevices.com> --- arch/arm/include/asm/arch-mx6/iomux.h | 129 +++++++++++++++++++++++++ arch/arm/include/asm/imx-common/iomux-v3.h | 111 --------------------- board/freescale/mx6qsabrelite/mx6qsabrelite.c | 1 + 3 files changed, 130 insertions(+), 111 deletions(-) create mode 100644 arch/arm/include/asm/arch-mx6/iomux.h diff --git a/arch/arm/include/asm/arch-mx6/iomux.h b/arch/arm/include/asm/arch-mx6/iomux.h new file mode 100644 index 0000000..a1255f9 --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/iomux.h @@ -0,0 +1,129 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_IOMUX_H__ +#define __ASM_ARCH_IOMUX_H__ +/* + * IOMUXC_GPR13 bit fields + */ +#define IOMUXC_GPR13_SDMA_STOP_REQ (1<<30) +#define IOMUXC_GPR13_CAN2_STOP_REQ (1<<29) +#define IOMUXC_GPR13_CAN1_STOP_REQ (1<<28) +#define IOMUXC_GPR13_ENET_STOP_REQ (1<<27) +#define IOMUXC_GPR13_SATA_PHY_8_MASK (7<<24) +#define IOMUXC_GPR13_SATA_PHY_7_MASK (0x1f<<19) +#define IOMUXC_GPR13_SATA_PHY_6_SHIFT 16 +#define IOMUXC_GPR13_SATA_PHY_6_MASK (7<<IOMUXC_GPR13_SATA_PHY_6_SHIFT) +#define IOMUXC_GPR13_SATA_SPEED_MASK (1<<15) +#define IOMUXC_GPR13_SATA_PHY_5_MASK (1<<14) +#define IOMUXC_GPR13_SATA_PHY_4_MASK (7<<11) +#define IOMUXC_GPR13_SATA_PHY_3_MASK (0x1f<<7) +#define IOMUXC_GPR13_SATA_PHY_2_MASK (0x1f<<2) +#define IOMUXC_GPR13_SATA_PHY_1_MASK (3<<0) + +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_0P5DB (0b000<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P0DB (0b001<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P5DB (0b010<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P0DB (0b011<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P5DB (0b100<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB (0b101<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P5DB (0b110<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_4P0DB (0b111<<24) + +#define IOMUXC_GPR13_SATA_PHY_7_SATA1I (0b10000<<19) +#define IOMUXC_GPR13_SATA_PHY_7_SATA1M (0b10000<<19) +#define IOMUXC_GPR13_SATA_PHY_7_SATA1X (0b11010<<19) +#define IOMUXC_GPR13_SATA_PHY_7_SATA2I (0b10010<<19) +#define IOMUXC_GPR13_SATA_PHY_7_SATA2M (0b10010<<19) +#define IOMUXC_GPR13_SATA_PHY_7_SATA2X (0b11010<<19) + +#define IOMUXC_GPR13_SATA_SPEED_1P5G (0<<15) +#define IOMUXC_GPR13_SATA_SPEED_3G (1<<15) + +#define IOMUXC_GPR13_SATA_SATA_PHY_5_SS_DISABLED (0<<14) +#define IOMUXC_GPR13_SATA_SATA_PHY_5_SS_ENABLED (1<<14) + +#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_16_16 (0<<11) +#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_14_16 (1<<11) +#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_12_16 (2<<11) +#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_10_16 (3<<11) +#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16 (4<<11) +#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_8_16 (5<<11) + +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB (0b0000<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P37_DB (0b0001<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P74_DB (0b0010<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P11_DB (0b0011<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P48_DB (0b0100<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P85_DB (0b0101<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P22_DB (0b0110<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P59_DB (0b0111<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P96_DB (0b1000<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P33_DB (0b1001<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P70_DB (0b1010<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P07_DB (0b1011<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P44_DB (0b1100<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P81_DB (0b1101<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P28_DB (0b1110<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P75_DB (0b1111<<7) + +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P937V (0b00000<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P947V (0b00001<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P957V (0b00010<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P966V (0b00011<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P976V (0b00100<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P986V (0b00101<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P996V (0b00110<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P005V (0b00111<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P015V (0b01000<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P025V (0b01001<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P035V (0b01010<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P045V (0b01011<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P054V (0b01100<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P064V (0b01101<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P074V (0b01110<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P084V (0b01111<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P094V (0b10000<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P104V (0b10001<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P113V (0b10010<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P123V (0b10011<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P133V (0b10100<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P143V (0b10101<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P152V (0b10110<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P162V (0b10111<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P172V (0b11000<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P182V (0b11001<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P191V (0b11010<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P201V (0b11011<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P211V (0b11100<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P221V (0b11101<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P230V (0b11110<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P240V (0b11111<<2) + +#define IOMUXC_GPR13_SATA_PHY_1_FAST 0 +#define IOMUXC_GPR13_SATA_PHY_1_MEDIUM 1 +#define IOMUXC_GPR13_SATA_PHY_1_SLOW 2 + +#define IOMUXC_GPR13_SATA_MASK (IOMUXC_GPR13_SATA_PHY_8_MASK \ + |IOMUXC_GPR13_SATA_PHY_7_MASK \ + |IOMUXC_GPR13_SATA_PHY_6_MASK \ + |IOMUXC_GPR13_SATA_SPEED_MASK \ + |IOMUXC_GPR13_SATA_PHY_5_MASK \ + |IOMUXC_GPR13_SATA_PHY_4_MASK \ + |IOMUXC_GPR13_SATA_PHY_3_MASK \ + |IOMUXC_GPR13_SATA_PHY_2_MASK \ + |IOMUXC_GPR13_SATA_PHY_1_MASK) +#endif /* __ASM_ARCH_IOMUX_H__ */ diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h index 788b413..4558f4f 100644 --- a/arch/arm/include/asm/imx-common/iomux-v3.h +++ b/arch/arm/include/asm/imx-common/iomux-v3.h @@ -100,115 +100,4 @@ typedef u64 iomux_v3_cfg_t; int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad); int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count); -/* - * IOMUXC_GPR13 bit fields - */ -#define IOMUXC_GPR13_SDMA_STOP_REQ (1<<30) -#define IOMUXC_GPR13_CAN2_STOP_REQ (1<<29) -#define IOMUXC_GPR13_CAN1_STOP_REQ (1<<28) -#define IOMUXC_GPR13_ENET_STOP_REQ (1<<27) -#define IOMUXC_GPR13_SATA_PHY_8_MASK (7<<24) -#define IOMUXC_GPR13_SATA_PHY_7_MASK (0x1f<<19) -#define IOMUXC_GPR13_SATA_PHY_6_SHIFT 16 -#define IOMUXC_GPR13_SATA_PHY_6_MASK (7<<IOMUXC_GPR13_SATA_PHY_6_SHIFT) -#define IOMUXC_GPR13_SATA_SPEED_MASK (1<<15) -#define IOMUXC_GPR13_SATA_PHY_5_MASK (1<<14) -#define IOMUXC_GPR13_SATA_PHY_4_MASK (7<<11) -#define IOMUXC_GPR13_SATA_PHY_3_MASK (0x1f<<7) -#define IOMUXC_GPR13_SATA_PHY_2_MASK (0x1f<<2) -#define IOMUXC_GPR13_SATA_PHY_1_MASK (3<<0) - -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_0P5DB (0b000<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P0DB (0b001<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P5DB (0b010<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P0DB (0b011<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P5DB (0b100<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB (0b101<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P5DB (0b110<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_4P0DB (0b111<<24) - -#define IOMUXC_GPR13_SATA_PHY_7_SATA1I (0b10000<<19) -#define IOMUXC_GPR13_SATA_PHY_7_SATA1M (0b10000<<19) -#define IOMUXC_GPR13_SATA_PHY_7_SATA1X (0b11010<<19) -#define IOMUXC_GPR13_SATA_PHY_7_SATA2I (0b10010<<19) -#define IOMUXC_GPR13_SATA_PHY_7_SATA2M (0b10010<<19) -#define IOMUXC_GPR13_SATA_PHY_7_SATA2X (0b11010<<19) - -#define IOMUXC_GPR13_SATA_SPEED_1P5G (0<<15) -#define IOMUXC_GPR13_SATA_SPEED_3G (1<<15) - -#define IOMUXC_GPR13_SATA_SATA_PHY_5_SS_DISABLED (0<<14) -#define IOMUXC_GPR13_SATA_SATA_PHY_5_SS_ENABLED (1<<14) - -#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_16_16 (0<<11) -#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_14_16 (1<<11) -#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_12_16 (2<<11) -#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_10_16 (3<<11) -#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16 (4<<11) -#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_8_16 (5<<11) - -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB (0b0000<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P37_DB (0b0001<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P74_DB (0b0010<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P11_DB (0b0011<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P48_DB (0b0100<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P85_DB (0b0101<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P22_DB (0b0110<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P59_DB (0b0111<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P96_DB (0b1000<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P33_DB (0b1001<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P70_DB (0b1010<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P07_DB (0b1011<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P44_DB (0b1100<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P81_DB (0b1101<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P28_DB (0b1110<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P75_DB (0b1111<<7) - -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P937V (0b00000<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P947V (0b00001<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P957V (0b00010<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P966V (0b00011<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P976V (0b00100<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P986V (0b00101<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P996V (0b00110<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P005V (0b00111<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P015V (0b01000<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P025V (0b01001<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P035V (0b01010<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P045V (0b01011<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P054V (0b01100<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P064V (0b01101<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P074V (0b01110<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P084V (0b01111<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P094V (0b10000<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P104V (0b10001<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P113V (0b10010<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P123V (0b10011<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P133V (0b10100<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P143V (0b10101<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P152V (0b10110<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P162V (0b10111<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P172V (0b11000<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P182V (0b11001<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P191V (0b11010<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P201V (0b11011<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P211V (0b11100<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P221V (0b11101<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P230V (0b11110<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P240V (0b11111<<2) - -#define IOMUXC_GPR13_SATA_PHY_1_FAST 0 -#define IOMUXC_GPR13_SATA_PHY_1_MEDIUM 1 -#define IOMUXC_GPR13_SATA_PHY_1_SLOW 2 - -#define IOMUXC_GPR13_SATA_MASK (IOMUXC_GPR13_SATA_PHY_8_MASK \ - |IOMUXC_GPR13_SATA_PHY_7_MASK \ - |IOMUXC_GPR13_SATA_PHY_6_MASK \ - |IOMUXC_GPR13_SATA_SPEED_MASK \ - |IOMUXC_GPR13_SATA_PHY_5_MASK \ - |IOMUXC_GPR13_SATA_PHY_4_MASK \ - |IOMUXC_GPR13_SATA_PHY_3_MASK \ - |IOMUXC_GPR13_SATA_PHY_2_MASK \ - |IOMUXC_GPR13_SATA_PHY_1_MASK) - #endif /* __MACH_IOMUX_V3_H__*/ diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 01e5083..a1e3acc 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -24,6 +24,7 @@ #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/imx-regs.h> +#include <asm/arch/iomux.h> #include <asm/arch/mx6x_pins.h> #include <asm/errno.h> #include <asm/gpio.h> -- 1.7.9.5

2 2

[U-Boot] [PATCH] mx5/6 timer: Round up tick_to_time() value
by Benoît Thébaudeau 20 Aug '12

20 Aug '12

Round up tick_to_time() value instead of truncating it. This avoids stopping waits instantly for low usec values, and this generally guarantees that the code always waits for at least the requested duration. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau(a)advansee.com> Cc: Stefano Babic <sbabic(a)denx.de> --- .../arch/arm/cpu/armv7/imx-common/timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git u-boot-4d3c95f.orig/arch/arm/cpu/armv7/imx-common/timer.c u-boot-4d3c95f/arch/arm/cpu/armv7/imx-common/timer.c index 1645ff8..e2725e1 100644 --- u-boot-4d3c95f.orig/arch/arm/cpu/armv7/imx-common/timer.c +++ u-boot-4d3c95f/arch/arm/cpu/armv7/imx-common/timer.c @@ -61,7 +61,7 @@ static inline unsigned long long tick_to_time(unsigned long long tick) static inline unsigned long long us_to_tick(unsigned long long usec) { - usec *= CLK_32KHZ; + usec = usec * CLK_32KHZ + 999999; do_div(usec, 1000000); return usec;

2 2

[U-Boot] [PATCH] mx3: Fix typo on IPU_CONF_CSI_EN
by Benoît Thébaudeau 20 Aug '12

20 Aug '12

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau(a)advansee.com> Cc: Stefano Babic <sbabic(a)denx.de> --- .../arch/arm/include/asm/arch-mx31/imx-regs.h | 2 +- .../arch/arm/include/asm/arch-mx35/imx-regs.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git u-boot-4d3c95f.orig/arch/arm/include/asm/arch-mx31/imx-regs.h u-boot-4d3c95f/arch/arm/include/asm/arch-mx31/imx-regs.h index 7ddbbd6..bba37ac 100644 --- u-boot-4d3c95f.orig/arch/arm/include/asm/arch-mx31/imx-regs.h +++ u-boot-4d3c95f/arch/arm/include/asm/arch-mx31/imx-regs.h @@ -669,7 +669,7 @@ struct esdc_regs { #define IPU_CONF_PF_EN (1<<3) #define IPU_CONF_ROT_EN (1<<2) #define IPU_CONF_IC_EN (1<<1) -#define IPU_CONF_SCI_EN (1<<0) +#define IPU_CONF_CSI_EN (1<<0) #define ARM_PPMRR 0x40000015 diff --git u-boot-4d3c95f.orig/arch/arm/include/asm/arch-mx35/imx-regs.h u-boot-4d3c95f/arch/arm/include/asm/arch-mx35/imx-regs.h index 3146006..e292bcf 100644 --- u-boot-4d3c95f.orig/arch/arm/include/asm/arch-mx35/imx-regs.h +++ u-boot-4d3c95f/arch/arm/include/asm/arch-mx35/imx-regs.h @@ -177,7 +177,7 @@ #define IPU_CONF_PF_EN (1<<3) #define IPU_CONF_ROT_EN (1<<2) #define IPU_CONF_IC_EN (1<<1) -#define IPU_CONF_SCI_EN (1<<0) +#define IPU_CONF_CSI_EN (1<<0) /* * CSPI register definitions

2 2