August 2012 - U-Boot

[U-Boot] [PATCH 1/2] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
by Lukasz Majewski 07 Jan '13

07 Jan '13

This commit makes the video subsystem code cache aware. Memory allocated for decompressed BMP memory is now cache line aligned. Flushing of the dcache is also performed after copying BMP data to fb address. Signed-off-by: Lukasz Majewski <l.majewski(a)samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park(a)samsung.com> Cc: Anatolij Gustschin <agust(a)denx.de> --- common/cmd_bmp.c | 2 +- common/lcd.c | 3 +++ 2 files changed, 4 insertions(+), 1 deletions(-) diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c index b8809e3..7d3f45a 100644 --- a/common/cmd_bmp.c +++ b/common/cmd_bmp.c @@ -54,7 +54,7 @@ bmp_image_t *gunzip_bmp(unsigned long addr, unsigned long *lenp) * Decompress bmp image */ len = CONFIG_SYS_VIDEO_LOGO_MAX_SIZE; - dst = malloc(CONFIG_SYS_VIDEO_LOGO_MAX_SIZE); + dst = memalign(CONFIG_SYS_CACHELINE_SIZE, len); if (dst == NULL) { puts("Error: malloc in gunzip failed!\n"); return NULL; diff --git a/common/lcd.c b/common/lcd.c index 506a138..b092a11 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -802,6 +802,9 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) } fb -= (lcd_line_length + width * (bpix / 8)); } + flush_dcache_range((unsigned long) fb, + (unsigned long) fb + + (lcd_line_length * height)); break; #endif /* CONFIG_BMP_32BPP */ default: -- 1.7.2.3

6 12

[U-Boot] [PATCH] arm: bugfix: Move vector table before jumping relocated code
by Tetsuyuki Kobayashi 26 Dec '12

26 Dec '12

Interrupts and exceptions doesn't work in relocated code. It badly use IRQ_STACK_START_IN in rom area as interrupt stack. It is because the vecotr table is not moved to ram area. This patch moves vector table before jumping relocated code. Signed-off-by: Tetsuyuki Kobayashi <koba(a)kmckk.co.jp> --- arch/arm/cpu/armv7/start.S | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 52f7f6e..5098f7b 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -277,6 +277,18 @@ jump_2_ram: mcr p15, 0, r0, c7, c10, 4 @ DSB mcr p15, 0, r0, c7, c5, 4 @ ISB #endif +/* + * Move vector table + */ +#if !defined(CONFIG_TEGRA2) +#if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD)) + /* Set vector address in CP15 VBAR register */ + ldr r0, =_start + add r0, r0, r9 + mcr p15, 0, r0, c12, c0, 0 @Set VBAR +#endif +#endif /* !Tegra2 */ + ldr r0, _board_init_r_ofs adr r1, _start add lr, r0, r1 -- 1.7.9.5

5 10

[U-Boot] [PATCH] ARM: lacie_kw: add support for WIRELESS_SPACE
by Albert ARIBAUD 20 Dec '12

20 Dec '12

Signed-off-by: Albert ARIBAUD <albert.u.boot(a)aribaud.net> --- This patch adds the Wireless Space to the lacie_kw sub-targets. It *should* not change a thing to the already existing sub-targets (except that each one gets its own prompt). Owners of NETSPACE_[MAX]_V2, INETSPACE_V2, NET2BIG_V2 please test. board/LaCie/netspace_v2/netspace_v2.c | 42 ++---------- board/LaCie/netspace_v2/netspace_v2.h | 121 +++++++++++++++++++++++++++++++++ boards.cfg | 1 + drivers/net/mvgbe.c | 10 ++- include/configs/lacie_kw.h | 38 ++++++++++- 5 files changed, 175 insertions(+), 37 deletions(-) diff --git a/board/LaCie/netspace_v2/netspace_v2.c b/board/LaCie/netspace_v2/netspace_v2.c index 68e8a77..084f0cf 100644 --- a/board/LaCie/netspace_v2/netspace_v2.c +++ b/board/LaCie/netspace_v2/netspace_v2.c @@ -39,40 +39,7 @@ int board_early_init_f(void) NETSPACE_V2_OE_LOW, NETSPACE_V2_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, /* Fan speed (bit 1) */ - MPP8_TW_SDA, - MPP9_TW_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_GPO, /* Red led */ - MPP14_GPIO, /* USB fuse */ - MPP16_GPIO, /* SATA 0 power */ - MPP17_GPIO, /* SATA 1 power */ - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, - MPP22_GPIO, /* Fan speed (bit 0) */ - MPP23_GPIO, /* Fan power */ - MPP24_GPIO, /* USB mode select */ - MPP25_GPIO, /* Fan rotation fail */ - MPP26_GPIO, /* USB vbus-in detection */ - MPP28_GPIO, /* USB enable vbus-out */ - MPP29_GPIO, /* Blue led (slow register) */ - MPP30_GPIO, /* Blue led (command register) */ - MPP31_GPIO, /* Board power off */ - MPP32_GPIO, /* Button (0 = Released, 1 = Pushed) */ - MPP33_GPIO, /* Fan speed (bit 2) */ - 0 - }; + u32 kwmpp_config[] = NETSPACE_V2_MPP_CONFIG; kirkwood_mpp_conf(kwmpp_config, NULL); return 0; @@ -107,7 +74,12 @@ int misc_init_r(void) /* Configure and initialize PHY */ void reset_phy(void) { - mv_phy_88e1116_init("egiga0", 8); +#ifdef CONFIG_EGIGA0_PHY + mv_phy_88e1116_init("egiga0", CONFIG_EGIGA0_PHY); +#endif +#ifdef CONFIG_EGIGA1_PHY + mv_phy_88e1116_init("egiga1", CONFIG_EGIGA1_PHY); +#endif } #endif diff --git a/board/LaCie/netspace_v2/netspace_v2.h b/board/LaCie/netspace_v2/netspace_v2.h index 34e492c..fc1d571 100644 --- a/board/LaCie/netspace_v2/netspace_v2.h +++ b/board/LaCie/netspace_v2/netspace_v2.h @@ -24,11 +24,132 @@ #define NETSPACE_V2_H /* GPIO configuration */ + +/* Net Space V2, Net Space Max V2, Internet Space V2: */ +#if defined(CONFIG_NETSPACE_MAX_V2) \ + || defined(CONFIG_NETSPACE_V2) \ + || defined(CONFIG_NET2BIG_V2) \ + || defined(CONFIG_INETSPACE_V2) + #define NETSPACE_V2_OE_LOW 0x06004000 #define NETSPACE_V2_OE_HIGH 0x00000031 #define NETSPACE_V2_OE_VAL_LOW 0x10030000 #define NETSPACE_V2_OE_VAL_HIGH 0x00000000 +/* Wireless Space */ + +#elif defined(CONFIG_WIRELESS_SPACE) + +#define NETSPACE_V2_OE_LOW 0xFF006808 +#define NETSPACE_V2_OE_HIGH 0x0000F989 +#define NETSPACE_V2_OE_VAL_LOW 0x00000000 +#define NETSPACE_V2_OE_VAL_HIGH 0x00000000 + +#else + +#error Undefined or unsupported LaCie KW board variant + +#endif + #define NETSPACE_V2_GPIO_BUTTON 32 +/* MPP configuration */ + +/* Net Space V2, Net Space Max V2, Internet Space V2: */ +#if defined(CONFIG_NETSPACE_MAX_V2) \ + || defined(CONFIG_NETSPACE_V2) \ + || defined(CONFIG_NET2BIG_V2) \ + || defined(CONFIG_INETSPACE_V2) + +#define NETSPACE_V2_MPP_CONFIG { \ + MPP0_SPI_SCn, \ + MPP1_SPI_MOSI, \ + MPP2_SPI_SCK, \ + MPP3_SPI_MISO, \ + MPP4_NF_IO6, \ + MPP5_NF_IO7, \ + MPP6_SYSRST_OUTn, \ + MPP7_GPO, /* Fan speed (bit 1) */ \ + MPP8_TW_SDA, \ + MPP9_TW_SCK, \ + MPP10_UART0_TXD, \ + MPP11_UART0_RXD, \ + MPP12_GPO, /* Red led */ \ + MPP14_GPIO, /* USB fuse */ \ + MPP16_GPIO, /* SATA 0 power */ \ + MPP17_GPIO, /* SATA 1 power */ \ + MPP18_NF_IO0, \ + MPP19_NF_IO1, \ + MPP20_SATA1_ACTn, \ + MPP21_SATA0_ACTn, \ + MPP22_GPIO, /* Fan speed (bit 0) */ \ + MPP23_GPIO, /* Fan power */ \ + MPP24_GPIO, /* USB mode select */ \ + MPP25_GPIO, /* Fan rotation fail */ \ + MPP26_GPIO, /* USB vbus-in detection */ \ + MPP28_GPIO, /* USB enable vbus-out */ \ + MPP29_GPIO, /* Blue led (slow register) */ \ + MPP30_GPIO, /* Blue led (command register) */ \ + MPP31_GPIO, /* Board power off */ \ + MPP32_GPIO, /* Button (0 = Released, 1 = Pushed) */ \ + MPP33_GPIO, /* Fan speed (bit 2) */ \ + 0 \ + } + +#elif defined(CONFIG_WIRELESS_SPACE) + +#define NETSPACE_V2_MPP_CONFIG { \ + MPP0_NF_IO2, \ + MPP1_NF_IO3, \ + MPP2_NF_IO4, \ + MPP3_NF_IO5, \ + MPP4_NF_IO6, \ + MPP5_NF_IO7, \ + MPP6_SYSRST_OUTn, \ + MPP7_GPO, /* Fan speed (bit 1) */ \ + MPP8_TW_SDA, \ + MPP9_TW_SCK, \ + MPP10_UART0_TXD, \ + MPP11_UART0_RXD, \ + MPP13_GPIO, /* Red led */ \ + MPP14_GPIO, /* USB fuse */ \ + MPP15_SATA0_ACTn, \ + MPP16_GPIO, /* SATA 0 power */ \ + MPP17_GPIO, /* SATA 1 power */ \ + MPP18_NF_IO0, \ + MPP19_NF_IO1, \ + MPP20_GE1_0, /* Gigabit Ethernet 1 */ \ + MPP21_GE1_1, \ + MPP22_GE1_2, \ + MPP23_GE1_3, \ + MPP24_GE1_4, \ + MPP25_GE1_5, \ + MPP26_GE1_6, \ + MPP27_GE1_7, \ + MPP28_GE1_8, \ + MPP29_GE1_9, \ + MPP30_GE1_10, \ + MPP31_GE1_11, \ + MPP32_GE1_12, \ + MPP33_GE1_13, \ + MPP34_GE1_14, \ + MPP35_GE1_15, \ + MPP36_GPIO, /* Fan speed (bit 2) */ \ + MPP37_GPIO, /* Fan speed (bit 0) */ \ + MPP38_GPIO, /* Fan power */ \ + MPP39_GPIO, /* Fan rotation fail */ \ + MPP40_GPIO, /* Ethernet switch link */ \ + MPP41_GPIO, /* USB enable host vbus */ \ + MPP42_GPIO, /* LED clock control */ \ + MPP43_GPIO, /* WPS button (0 = Pushed, 1 = Released) */ \ + MPP44_GPIO, /* Red LED on/off */ \ + MPP45_GPIO, /* Red LED timer blink (on=100ms, off=100ms) */ \ + MPP46_GPIO, /* Green LED on/off */ \ + MPP47_GPIO, /* LED (blue, green) SATA activity blink */ \ + MPP48_GPIO, /* Blue LED on/off */ \ + 0 \ + } + +#endif + #endif /* NETSPACE_V2_H */ diff --git a/boards.cfg b/boards.cfg index edd750c..f001b29 100644 --- a/boards.cfg +++ b/boards.cfg @@ -157,6 +157,7 @@ inetspace_v2 arm arm926ejs netspace_v2 LaCie net2big_v2 arm arm926ejs net2big_v2 LaCie kirkwood lacie_kw:NET2BIG_V2 netspace_max_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_MAX_V2 netspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_V2 +wireless_space arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:WIRELESS_SPACE dreamplug arm arm926ejs - Marvell kirkwood guruplug arm arm926ejs - Marvell kirkwood mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c index 47bf27c..670edb0 100644 --- a/drivers/net/mvgbe.c +++ b/drivers/net/mvgbe.c @@ -653,6 +653,14 @@ int mvgbe_initialize(bd_t *bis) struct eth_device *dev; int devnum; u8 used_ports[MAX_MVGBE_DEVS] = CONFIG_MVGBE_PORTS; +#if defined(CONFIG_MVGBE_PHY_ADRS) +#define MVGBE_PHY_ADRS CONFIG_MVGBE_PHY_ADRS +#elif defined(CONFIG_PHY_BASE_ADR) +#define MVGBE_PHY_ADRS {CONFIG_PHY_BASE_ADR,CONFIG_PHY_BASE_ADR+1} +#else +#define MVGBE_PHY_ADRS {8,9} +#endif + u8 used_phy_adrs[MAX_MVGBE_DEVS] = MVGBE_PHY_ADRS; for (devnum = 0; devnum < MAX_MVGBE_DEVS; devnum++) { /*skip if port is configured not to use */ @@ -733,7 +741,7 @@ error1: miiphy_register(dev->name, smi_reg_read, smi_reg_write); /* Set phy address of the port */ miiphy_write(dev->name, MV_PHY_ADR_REQUEST, - MV_PHY_ADR_REQUEST, PHY_BASE_ADR + devnum); + MV_PHY_ADR_REQUEST, used_phy_adrs[devnum]); #endif } return 0; diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index c35c2db..a979ab4 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -33,6 +33,10 @@ #elif defined(CONFIG_NET2BIG_V2) #define CONFIG_MACH_TYPE MACH_TYPE_NET2BIG_V2 #define CONFIG_IDENT_STRING " 2Big v2" +#elif defined(CONFIG_WIRELESS_SPACE) +#define MACH_TYPE_WIRELESS_SPACE 2500 /* is missing in mach-types.h */ +#define CONFIG_MACH_TYPE MACH_TYPE_WIRELESS_SPACE +#define CONFIG_IDENT_STRING " Wireless Space" #else #error "Unknown board" #endif @@ -73,6 +77,12 @@ #define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-is2.cfg #endif +#ifdef CONFIG_WIRELESS_SPACE +/* No SPI but NAND */ +#undef CONFIG_CMD_SF +#define CONFIG_CMD_NAND +#endif + /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros @@ -90,8 +100,14 @@ #define CONFIG_SYS_IDE_MAXDEVICE 1 #if defined(CONFIG_NET2BIG_V2) #define CONFIG_SYS_PROMPT "2big2> " -#else +#elif defined(CONFIG_NETSPACE_V2) #define CONFIG_SYS_PROMPT "ns2> " +#elif defined(CONFIG_INETSPACE_V2) +#define CONFIG_SYS_PROMPT "is2> " +#elif defined(CONFIG_WIRELESS_SPACE) +#define CONFIG_SYS_PROMPT "ws> " +#else +#define CONFIG_SYS_PROMPT "lacie-kw> " #endif /* @@ -99,7 +115,16 @@ */ #ifdef CONFIG_CMD_NET #define CONFIG_MISC_INIT_R /* Call misc_init_r() to initialize MAC address */ +#if defined(CONFIG_WIRELESS_SPACE) +#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports only */ +#define CONFIG_EGIGA1_PHY 0x6 /* egiga1 has a PHY, egiga0 has NOT */ +#define CONFIG_MVGBE_PHY_ADRS {0xa, 0x6} +#define CONFIG_MII +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN +#else #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ +#define CONFIG_EGIGA0_PHY 0x8 +#endif #define CONFIG_NETCONSOLE #endif @@ -154,11 +179,20 @@ /* * Environment variables configurations */ + +#if defined(CONFIG_WIRELESS_SPACE) +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64KB */ +#define CONFIG_ENV_SIZE 0x1000 /* 4KB */ +#define CONFIG_ENV_ADDR 0x70000 +#define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ +#else #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64KB */ #define CONFIG_ENV_SIZE 0x1000 /* 4KB */ #define CONFIG_ENV_ADDR 0x70000 #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ +#endif /* * Default environment variables @@ -185,4 +219,6 @@ "usbload=usb start && " \ "fatload usb 0:1 $loadaddr /boot/$bootfile\0" +//#define DEBUG + #endif /* _CONFIG_LACIE_KW_H */ -- 1.7.9.5

5 31

[U-Boot] [PATCH] Add a memory get command
by Joe Hershberger 20 Dec '12

20 Dec '12

This command allows you to read the value of a memory address and store it in an environment variable. Signed-off-by: Joe Hershberger <joe.hershberger(a)ni.com> --- common/cmd_mem.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/common/cmd_mem.c b/common/cmd_mem.c index 18f0a3f..08c7d69 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -32,6 +32,7 @@ #ifdef CONFIG_HAS_DATAFLASH #include <dataflash.h> #endif +#include <asm/io.h> #include <watchdog.h> static int mod_mem(cmd_tbl_t *, int, int, int, char * const []); @@ -147,6 +148,45 @@ int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return (rc); } +#ifdef CONFIG_CMD_MEM_GET +int do_mem_mg(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + ulong addr; + int size; + char *var; + char buf[11]; + + if (argc < 3) + return CMD_RET_USAGE; + + /* Check for a size specification. + * Defaults to long if no or incorrect specification. + */ + size = cmd_get_data_size(argv[0], 4); + if (size < 0) + return 1; + + var = argv[1]; + + addr = simple_strtoul(argv[2], NULL, 16); + addr += base_address; + + if (size == 4) { + uint32_t value = readl(addr); + sprintf(buf, "0x%08x", value); + } else if (size == 2) { + uint16_t value = readw(addr); + sprintf(buf, "0x%04x", value); + } else { + uint8_t value = readb(addr); + sprintf(buf, "0x%02x", value); + } + setenv(var, buf); + + return 0; +} +#endif + int do_mem_mm ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { return mod_mem (cmdtp, 1, flag, argc, argv); @@ -1145,6 +1185,13 @@ U_BOOT_CMD( "[.b, .w, .l] address [# of objects]" ); +#ifdef CONFIG_CMD_MEM_GET +U_BOOT_CMD( + mg, 3, 1, do_mem_mg, + "memory get", + "[.b, .w, .l] variable address" +); +#endif U_BOOT_CMD( mm, 2, 1, do_mem_mm, -- 1.7.11.5

4 4

[U-Boot] V4 S3C64XX: Switch all I/O to use readl/writel functio and Clear SMDK64XX
by Zhong Hongbo 07 Dec '12

07 Dec '12

V4: 1. Adjust SPL patch order 2. seperate the patch of "arm1176: Fixed No relocation.", It is a common issue for arm platform. I sent it for other thread. V3: 1. Replace ELFIN with S3C64XX for all the variable of cpu.h. 2. Change __S3C6400_H__ into __CPU__H__. 3. Use C language to implement memory initialization. 4. Use C language to re-write reset function. 5. Delete u-boot-nand.lds. V2: 1. Modify the type of return for s3c64xx_get_base_nand 2. Add patch 0014 to support s3c6410 board 3. Adjust patch for mix content. V1: This serial patch intent to: 1. Switch all I/O to use readl/writel function 2. Change nand_spl to use SPL framework 3. S3C64XX serial includes s3c6400 and s3c6410, Here seprate cpu and board file to support to board's of s3c6410. I test this patch on my s3c6410 development board. the log as following: U-Boot 2012.07-rc3-00016-g351ea73 (Jul 28 2012 - 16:55:32) for DMATEK6410 CPU: S3C64XX@532MHz Fclk = 532MHz, Hclk = 133MHz, Pclk = 66MHz (ASYNC Mode) Board: DMATEK6410 DRAM: 128 MiB WARNING: Caches not enabled NAND: 128 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: dm9000 Zhong Hongbo (14): smdk6400: Move smdk6400 board from Makefile to boards.cfg S3C64XX: Switch to use readl/writel to operate nand flash S3C64XX: Use readl/writel to operate uart S3C64XX: add pwm for s3c64xx support S3C64XX: reference s5p cpu time system for s3c64xx timer S3C64xx: mov cpu_init.S to the board directory S3C6400: Adopt SPL framwork to support spl for nand flash S3C6400: Delete nand_spl for S3C6400 S3C64XX: Change SROM init to use read/write operation S3C64XX: Switch to use read/writel to operation clock system S3c64xx: clear GPIO, Interrupt, Watchdog variable. S3C6400: clear memory init variable S3C64XX: Move s3c6400.h to cpu.h to support s3c6410 board S3C6400: Remove the unused variable for S3C6400 Makefile | 20 - arch/arm/cpu/arm1176/s3c64xx/Makefile | 7 +- arch/arm/cpu/arm1176/s3c64xx/cpu_init.S | 135 ---- arch/arm/cpu/arm1176/s3c64xx/pwm.c | 188 +++++ arch/arm/cpu/arm1176/s3c64xx/reset.S | 34 - arch/arm/cpu/arm1176/s3c64xx/reset.c | 39 + arch/arm/cpu/arm1176/s3c64xx/speed.c | 52 +- arch/arm/cpu/arm1176/s3c64xx/srom.c | 51 ++ arch/arm/cpu/arm1176/s3c64xx/timer.c | 195 +++--- arch/arm/cpu/arm1176/start.S | 16 +- arch/arm/include/asm/arch-s3c64xx/clock.h | 163 ++++ arch/arm/include/asm/arch-s3c64xx/cpu.h | 89 +++ arch/arm/include/asm/arch-s3c64xx/dmc.h | 62 ++ arch/arm/include/asm/arch-s3c64xx/gpio.h | 38 + arch/arm/include/asm/arch-s3c64xx/interrupt.h | 31 + arch/arm/include/asm/arch-s3c64xx/nand.h | 72 ++ arch/arm/include/asm/arch-s3c64xx/pwm.h | 70 ++ arch/arm/include/asm/arch-s3c64xx/s3c6400.h | 895 ----------------------- arch/arm/include/asm/arch-s3c64xx/s3c64x0.h | 90 --- arch/arm/include/asm/arch-s3c64xx/sromc.h | 49 ++ arch/arm/include/asm/arch-s3c64xx/uart.h | 54 ++ board/samsung/smdk6400/Makefile | 30 +- board/samsung/smdk6400/config.mk | 30 - board/samsung/smdk6400/dmc_init.c | 110 +++ board/samsung/smdk6400/lowlevel_init.S | 76 +- board/samsung/smdk6400/setup.h | 137 ++++ board/samsung/smdk6400/smdk6400.c | 40 +- board/samsung/smdk6400/smdk6400_nand_spl.c | 61 ++- board/samsung/smdk6400/tools/mksmdk6400_image.c | 117 +++ board/samsung/smdk6400/u-boot-nand.lds | 84 --- boards.cfg | 2 + drivers/mtd/nand/s3c64xx.c | 64 +- drivers/serial/s3c64xx.c | 52 +- drivers/usb/host/s3c64xx-hcd.c | 32 +- include/configs/smdk6400.h | 40 +- nand_spl/board/samsung/smdk6400/Makefile | 117 --- nand_spl/board/samsung/smdk6400/config.mk | 40 - nand_spl/board/samsung/smdk6400/u-boot.lds | 78 -- 38 files changed, 1667 insertions(+), 1793 deletions(-) delete mode 100644 arch/arm/cpu/arm1176/s3c64xx/cpu_init.S create mode 100644 arch/arm/cpu/arm1176/s3c64xx/pwm.c delete mode 100644 arch/arm/cpu/arm1176/s3c64xx/reset.S create mode 100644 arch/arm/cpu/arm1176/s3c64xx/reset.c create mode 100644 arch/arm/cpu/arm1176/s3c64xx/srom.c create mode 100644 arch/arm/include/asm/arch-s3c64xx/clock.h create mode 100644 arch/arm/include/asm/arch-s3c64xx/cpu.h create mode 100644 arch/arm/include/asm/arch-s3c64xx/dmc.h create mode 100644 arch/arm/include/asm/arch-s3c64xx/gpio.h create mode 100644 arch/arm/include/asm/arch-s3c64xx/interrupt.h create mode 100644 arch/arm/include/asm/arch-s3c64xx/nand.h create mode 100644 arch/arm/include/asm/arch-s3c64xx/pwm.h delete mode 100644 arch/arm/include/asm/arch-s3c64xx/s3c6400.h delete mode 100644 arch/arm/include/asm/arch-s3c64xx/s3c64x0.h create mode 100644 arch/arm/include/asm/arch-s3c64xx/sromc.h create mode 100644 arch/arm/include/asm/arch-s3c64xx/uart.h delete mode 100644 board/samsung/smdk6400/config.mk create mode 100644 board/samsung/smdk6400/dmc_init.c create mode 100644 board/samsung/smdk6400/setup.h create mode 100644 board/samsung/smdk6400/tools/mksmdk6400_image.c delete mode 100644 board/samsung/smdk6400/u-boot-nand.lds delete mode 100644 nand_spl/board/samsung/smdk6400/Makefile delete mode 100644 nand_spl/board/samsung/smdk6400/config.mk delete mode 100644 nand_spl/board/samsung/smdk6400/u-boot.lds

2 18

[U-Boot] [PATCH 0/6] gpt: GUID Partition Table (GPT) restoration
by Lukasz Majewski 07 Dec '12

07 Dec '12

This patch series provides a new command - "gpt" for eMMC partition table (in the GPT format) restoration and display. As a pre-work, some cleanup at the part_efi.c file was performed to remove custom macros and make GPT related structures more readable. The GPT detailed description has been written to README.gpt file. Tested at: - Exynos4210 rev.1 - TRATS Samsung development board Lukasz Majewski (6): gpt:doc: GPT (GUID Partition Table) documentation gpt: Replace the leXX_to_int() calls with ones defined at <compiler.h> gpt: Replacement of GPT structures members with ones indicating endianness and size gpt: Support for GPT (GUID Partition Table) restoration gpt: Support for new "gpt" command gpt: Enable support for GPT partition table restoration at Samsung's Trats common/Makefile | 1 + common/cmd_gpt.c | 182 ++++++++++++++++++++++++++ disk/part_efi.c | 334 +++++++++++++++++++++++++++++++++++++---------- disk/part_efi.h | 85 ++++++------ doc/README.gpt | 199 ++++++++++++++++++++++++++++ include/configs/trats.h | 23 +++- include/part.h | 2 + 7 files changed, 715 insertions(+), 111 deletions(-) create mode 100644 common/cmd_gpt.c create mode 100644 doc/README.gpt -- 1.7.2.3

10 93

[U-Boot] [PATCH 3/3] cm4008: use common cfi_flash support
by Yann Vernier 01 Dec '12

01 Dec '12

This change allows use of other flash chips than the two supported by the cm4008 flash.c. Tested with Micrel KSZ8695X demo board. Signed-off-by: Yann Vernier <yann.vernier(a)orsoc.se> --- board/cm4008/Makefile | 2 +- include/configs/cm4008.h | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/board/cm4008/Makefile b/board/cm4008/Makefile index 5b98824..22fd74e 100644 --- a/board/cm4008/Makefile +++ b/board/cm4008/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := cm4008.o flash.o +COBJS := cm4008.o # flash.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h index 7c2e113..6d1a1ae 100644 --- a/include/configs/cm4008.h +++ b/include/configs/cm4008.h @@ -125,6 +125,10 @@ #define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER 1 +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT + /*----------------------------------------------------------------------- * FLASH and environment organization */ -- 1.7.10

5 53

[U-Boot] [PATCH 0/5] Various x86 patches
by Graeme Russ 28 Nov '12

28 Nov '12

These have been floating around for a while waiting for 2012.04 The first patch touches on the common makefiles, but it is only examples/standalone/Makefile that really needs to be checked for cross-platform issues Graeme Russ (5): x86: Fix compilation on 64-built built machines x86: Forward declate gd_t x86: Put global data on the stack x86: Remove duplicate PCI init x86: Add ilog2 to bitops Makefile | 1 + arch/x86/cpu/config.mk | 3 +- arch/x86/cpu/cpu.c | 6 --- arch/x86/cpu/start.S | 67 +++++++++++++++++++++++++++++++---- arch/x86/include/asm/bitops.h | 5 +++ arch/x86/include/asm/global_data.h | 5 ++- arch/x86/include/asm/init_helpers.h | 1 - arch/x86/include/asm/processor.h | 1 + arch/x86/lib/board.c | 5 +-- arch/x86/lib/init_helpers.c | 37 +------------------- examples/standalone/Makefile | 2 +- include/configs/eNET.h | 6 --- 12 files changed, 75 insertions(+), 64 deletions(-) -- 1.7.7.6

4 17

Re: [U-Boot] [PATCH 0/5] Various x86 patches
by Graeme Russ 28 Nov '12

28 Nov '12

Hi Andy, On 04/29/2012 10:25 PM, Andy Pont wrote: > Hi Graeme, > >> Graeme Russ (5): >> x86: Fix compilation on 64-built built machines > > Shouldn't this be 64-bit build machines? Yep - Thanks Regards, Graeme

2 1

[U-Boot] ERROR: CTL:TIMEOUT - USB porting issue for UBoot on S3C2450
by dongdaking 23 Nov '12

23 Nov '12

Hi, I am porting UBoot on S3C2450 and has an USB issue. Here is an error message: ERROR: CTL:TIMEOUT USB device not responding, giving up (status=20) 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found The problem seems submit_common_msg couldn't get description of USB flash memory device Could I have help? Please tell me if you had this issue before. Thank you for your helping Here is a log data usb start (Re)start USB... USB: INFO: aligned ghcca c3e4f900 DEBUG: USB HC reset_hc usb-smdk2450: ctrl = 0x9F ; DEBUG: OHCI controller usb-smdk2450 state DEBUG: control: 0x0000008f HCFS=operational IE PLE CBSR=3 DEBUG: cmdstatus: 0x00000000 SOC=0 DEBUG: intrstatus: 0x00000044 RHSC SF DEBUG: intrenable: 0x00000053 RHSC UE WDH SO DEBUG: hcca frame #0000 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS scanning bus for devices... New Device 0 start 0st usb_new_device usb_control_msg: request: 0x6, requesttype: 0x80 value 0x100 index 0x0 length 0x40 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 0,ep: 0-I,type:CTRL,len:0/64 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 0,ep: 0-I,type:CTRL,len:0/64 stat:0x80000000 INFO: Root-Hub: adr: 0 cmd(8): 00000680 0100 0000 0040 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 0,ep: 0-I,type:CTRL,len:64/64 stat:0x0 start 1st usb_new_device usb_control_msg: request: 0x6, requesttype: 0x80 value 0x100 index 0x0 length 0x40 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 0,ep: 0-I,type:CTRL,len:0/64 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 0,ep: 0-I,type:CTRL,len:0/64 stat:0x80000000 INFO: Root-Hub: adr: 0 cmd(8): 00000680 0100 0000 0040 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 0,ep: 0-I,type:CTRL,len:64/64 stat:0x0 start 2st usb_new_device usb_control_msg: request: 0x6, requesttype: 0x80 value 0x100 index 0x0 length 0x40 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 0,ep: 0-I,type:CTRL,len:0/64 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 0,ep: 0-I,type:CTRL,len:0/64 stat:0x80000000 INFO: Root-Hub: adr: 0 cmd(8): 00000680 0100 0000 0040 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 0,ep: 0-I,type:CTRL,len:64/64 stat:0x0 set address 1 usb_control_msg: request: 0x5, requesttype: 0x0 value 0x1 index 0x0 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 0,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 0,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000500 0001 0000 0000 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 0,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_control_msg: request: 0x6, requesttype: 0x80 value 0x100 index 0x0 length 0x12 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/18 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/18 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000680 0100 0000 0012 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:18/18 stat:0x0 usb_control_msg: request: 0x6, requesttype: 0x80 value 0x200 index 0x0 length 0x8 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/8 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/8 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000680 0200 0000 0008 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:8/8 stat:0x0 usb_control_msg: request: 0x6, requesttype: 0x80 value 0x200 index 0x0 length 0x19 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/25 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/25 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000680 0200 0000 0019 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:25/25 stat:0x0 get_conf_no 0 Result 25, wLength 25 if 0, ep 0 ##EP epmaxpacketin[1] = 2 set configuration 1 usb_control_msg: request: 0x9, requesttype: 0x0 value 0x1 index 0x0 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000900 0001 0000 0000 INFO: WR:status 0x10000 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 new device strings: Mfr=0, Product=1, SerialNumber=0 usb_control_msg: request: 0x6, requesttype: 0x80 value 0x300 index 0x0 length 0xFF INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/255 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/255 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000680 0300 0000 00ff DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:255/255 stat:0x0 USB device number 1 default language ID 0x409 usb_control_msg: request: 0x6, requesttype: 0x80 value 0x301 index 0x409 length 0xFF INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/255 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/255 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000680 0301 0409 00ff DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:255/255 stat:0x0 Manufacturer Product OHCI Root Hub SerialNumber usb_control_msg: request: 0x6, requesttype: 0xA0 value 0x2900 index 0x0 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000006a0 2900 0000 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:4/4 stat:0x0 usb_control_msg: request: 0x6, requesttype: 0xA0 value 0x2900 index 0x0 length 0x9 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/9 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/9 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000006a0 2900 0000 0009 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:9/9 stat:0x0 usb_control_msg: request: 0x0, requesttype: 0xA0 value 0x0 index 0x0 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000000a0 0000 0000 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:4/4 stat:0x0 usb_control_msg: request: 0x3, requesttype: 0x23 value 0x8 index 0x1 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000323 0008 0001 0000 INFO: WR:portstatus[0] 0x100 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_control_msg: request: 0x3, requesttype: 0x23 value 0x8 index 0x2 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000323 0008 0002 0000 INFO: WR:portstatus[1] 0x100 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_control_msg: request: 0x0, requesttype: 0xA3 value 0x0 index 0x1 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000000a3 0000 0001 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:4/4 stat:0x0 usb_control_msg: request: 0x0, requesttype: 0xA3 value 0x0 index 0x1 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000000a3 0000 0001 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:4/4 stat:0x0 usb_control_msg: request: 0x1, requesttype: 0x23 value 0x10 index 0x1 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000123 0010 0001 0000 INFO: WR:portstatus[0] 0x10000 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00000101 PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_control_msg: request: 0x3, requesttype: 0x23 value 0x4 index 0x1 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000323 0004 0001 0000 INFO: WR:portstatus[0] 0x10 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_control_msg: request: 0x0, requesttype: 0xA3 value 0x0 index 0x1 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000000a3 0000 0001 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:4/4 stat:0x0 usb_control_msg: request: 0x1, requesttype: 0x23 value 0x14 index 0x1 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000123 0014 0001 0000 INFO: WR:portstatus[0] 0x100000 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00000103 PPS PES CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 New Device 1 start 0st usb_new_device usb_control_msg: request: 0x6, requesttype: 0x80 value 0x100 index 0x0 length 0x40 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 0,ep: 0-I,type:CTRL,len:0/64 stat:0x80000000 DEBUG: SUB URB:[ 0] dev: 0,ep: 0-I,type:CTRL,len:0/64 stat:0x80000000 DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. DEBUG: % DEBUG: hc_interrupt: returning.. ERROR: hc_interrupt: returning.. ERROR: CTL:TIMEOUT DEBUG: submit_common_msg: TO status ff DEBUG: RET(ctlr) URB:[ 0] dev: 0,ep: 0-I,type:CTRL,len:0/64 stat:0x20 usb_new_device: 64 byte descr usb_control_msg: request: 0x3, requesttype: 0x23 value 0x4 index 0x1 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000323 0004 0001 0000 INFO: WR:portstatus[0] 0x10 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_control_msg: request: 0x0, requesttype: 0xA3 value 0x0 index 0x1 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000000a3 0000 0001 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:4/4 stat:0x0 usb_control_msg: request: 0x1, requesttype: 0x23 value 0x14 index 0x1 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000123 0014 0001 0000 INFO: WR:portstatus[0] 0x100000 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00000103 PPS PES CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 set address 2 usb_control_msg: request: 0x5, requesttype: 0x0 value 0x2 index 0x0 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 0,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 ERROR: submit_control_message: pipesize for pipe 80000000 is zero USB device not accepting new address (error=80000000) usb_control_msg: request: 0x1, requesttype: 0x23 value 0x1 index 0x1 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000123 0001 0001 0000 INFO: WR:portstatus[0] 0x1 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00000101 PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_control_msg: request: 0x0, requesttype: 0xA3 value 0x0 index 0x2 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000000a3 0000 0002 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00000101 PPS CCS DEBUG: roothub.portstatus [1] = 0x00000100 PPS DEBUG: RET(rh) URB:[ 0] dev: 1,ep: 0-I,type:CTRL,len:4/4 stat:0x0 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found Thank you a lot. Best regards -- View this message in context: http://old.nabble.com/ERROR%3A-CTL%3ATIMEOUT---USB-porting-issue-for-UBoot-… Sent from the Uboot - Users mailing list archive at Nabble.com.

2 1