August 2012 - U-Boot

[U-Boot] [PATCH 0/6] stdio: Clean up
by Marek Vasut 02 Sep '12

02 Sep '12

Clean up a few things in STDIO. Mostly, don't export structures directly, but introduce some kind of accessors if needed and remove dead code. NOTE: I'm still working on the "compile tested on 2 different architectures" part. I'll keep you posted about that. I'd be glad for a review though. I'd hate to pull in logic errors, especially into such critical code. NOTE2: Cross-posting cover to DM list, so I get feedback from those guys. Marek Vasut (6): stdio: dm: Murder dead code in console.c stdio: dm: Add accessors to stdio_devices[] stdio: dm: Make stdio_devices[] local stdio: dm: Add stdio_fd_to_name() call stdio: dm: Use stdio_fd_to_name() call to localize stdio_names stdio: dm: Optimize stdio_print_current_devices() common/cmd_console.c | 8 ++--- common/cmd_terminal.c | 9 ++++-- common/console.c | 84 ++++++++++++++++++++++++++----------------------- common/fdt_support.c | 8 ++++- common/stdio.c | 46 +++++++++++++++++++++++++-- include/stdio_dev.h | 9 ++---- 6 files changed, 110 insertions(+), 54 deletions(-) Cc: Wolfgang Denk <wd(a)denx.de> Cc: u-boot-dm(a)lists.denx.de -- 1.7.10.4

3 16

[U-Boot] Add a new protocol
by EVS Hardware Dpt 01 Sep '12

01 Sep '12

Hi, I want to add a new network protocol to u-boot. However it seems that the most straightforward way to add a new protocol is to add it to NetLoop's supported protocols. Of course, I would create a .c/.h pair of files to manage the protocol and use CONFIG_XXX to ensure it doesn't add unnecessary code. My problem is that the protocol is used for internal testing procedures to make u-boot act as a command server allowing a host pc to read/write memory, use i2c, program various data into flash (Mac Address, ID's, ...) and so on. The protocol could be gpl'ed and documented, yet it still have limited use outside our test procedure. So what could be the best way to achieve that goal? Should I replicate the whole NetLoop functionalities adapted to my protocol and put it on a .c/.h pair of files (and still using CONFIG_XXX) and keep these files available on request, or must I add that protocol to the "official" list of supported protocols? The second option is not very valuable for the community I think, but the first solution seems to be a very nasty hack. What's your opinion ? Regards, Fred.

3 5

[U-Boot] [PATCH v3 0/5] at91: 9x5: Enable PMECC(Programmable Multibit ECC controller) support
by Josh Wu 01 Sep '12

01 Sep '12

This patch series will add PMECC support for atmel at91sam9x5ek in u-boot. The NAND flash driver patch is ported from kernel patch. The main different from kernel patch is the modification about registers access part. in this version it via a register structure to access. It is tested in atmel AT919G25EK board. Changes since v2: adapt atmel nand driver to CONFIG_SYS_NAND_SELF_INIT. It use a new board_nand_init(void) function. Add README doc for Atmel PMECC. Add timeout for PMECC read hw status. refine code according to Andreas and Scott's comments. Josh Wu (5): at91: atmel_nand: extract HWECC initialization code into one function: atmel_hw_nand_init_param(). at91: atmel_nand: remove unused variables. at91: atmel_nand: Update driver to support Programmable Multibit ECC controller at91: 9x5: change SMC config timing that both works for PMECC & non-PMECC. at91: 9x5: Enable PMECC for 5series ek board. board/atmel/at91sam9x5ek/at91sam9x5ek.c | 12 +- doc/README.atmel_pmecc | 44 ++ drivers/mtd/nand/atmel_nand.c | 828 ++++++++++++++++++++++++++++--- drivers/mtd/nand/atmel_nand_ecc.h | 113 +++++ include/configs/at91sam9x5ek.h | 7 + include/nand.h | 2 +- 6 files changed, 938 insertions(+), 68 deletions(-) create mode 100644 doc/README.atmel_pmecc -- 1.7.9.5

3 13

[U-Boot] [PATCH] dlmalloc: remove manual reloc alias warning
by Andreas Bießmann 01 Sep '12

01 Sep '12

From: Andreas Bießmann <biessmann(a)corscience.de> The avr32 architecture (and some others) require manual relocation. Due to the previous error all avr32 boards gave warnings in MAKEALL wich makes it hard to find new warnings. This patch fixes following warning: ---8<--- dlmalloc.c: In function 'malloc_bin_reloc': dlmalloc.c:1493: warning: dereferencing pointer 'p' does break strict-aliasing rules dlmalloc.c:1493: warning: dereferencing pointer 'p' does break strict-aliasing rules dlmalloc.c:1490: note: initialized from here dlmalloc.c:1493: note: initialized from here --->8--- Signed-off-by: Andreas Bießmann <biessmann(a)corscience.de> --- A question to all the other related arches, namely m68k, mips, nds32 and sparc: Do you encounter the same warnings or is this warning due to my outdated compiler (4.4.3 currently, unfortunately atmel do not bother to send their patches mainline)? common/dlmalloc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/common/dlmalloc.c b/common/dlmalloc.c index c645d73..78b1885 100644 --- a/common/dlmalloc.c +++ b/common/dlmalloc.c @@ -1485,9 +1485,10 @@ static mbinptr av_[NAV * 2 + 2] = { }; #ifdef CONFIG_NEEDS_MANUAL_RELOC +typedef unsigned long __attribute__((__may_alias__)) ulong_aliased; void malloc_bin_reloc (void) { - unsigned long *p = (unsigned long *)(&av_[2]); + ulong_aliased *p = (ulong_aliased *)(&av_[2]); int i; for (i=2; i<(sizeof(av_)/sizeof(mbinptr)); ++i) { *p++ += gd->reloc_off; -- 1.7.10.4

5 9

[U-Boot] [PATCH] arm: sam9g10/sam9m10g45: remove CONFIG_ARCH_CPU_INIT
by Bo Shen 01 Sep '12

01 Sep '12

Remove CONFIG_ARCH_CPU_INIT for at91sam9g10ek and at91sam9m10g45ek Signed-off-by: Bo Shen <voice.shen(a)atmel.com> --- include/configs/at91sam9261ek.h | 1 - include/configs/at91sam9m10g45ek.h | 1 - 2 files changed, 2 deletions(-) diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 014437b..91337b9 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -40,7 +40,6 @@ #include <asm/hardware.h> -#define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 1d5fc8f..278cde1 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -39,7 +39,6 @@ #define CONFIG_AT91SAM9M10G45EK #define CONFIG_AT91FAMILY -#define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -- 1.7.9.5

2 1

[U-Boot] [PATCH] arm:at91-boards: remove console_init_f where unnecessary
by Andreas Bießmann 01 Sep '12

01 Sep '12

A lot of at91 boards have the console_init_f in board_init. This is useless cause it was called before by generic code in lib/board.c. Signed-off-by: Andreas Bießmann <andreas.devel(a)googlemail.com> cc: Jens Scharsig <esw(a)bus-elektronik.de> cc: Stelian Pop <stelian(a)popies.net> cc: Sedji Gaouaou<sedji.gaouaou(a)atmel.com> cc: Albin Tonnerre <albin.tonnerre(a)free-electrons.com> cc: Eric Benard <eric(a)eukrea.com> --- board/BuS/eb_cpux9k2/cpux9k2.c | 2 -- board/BuS/vl_ma2sc/vl_ma2sc.c | 3 --- board/atmel/at91sam9261ek/at91sam9261ek.c | 3 --- board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 3 --- board/atmel/at91sam9rlek/at91sam9rlek.c | 3 --- board/calao/sbc35_a9g20/sbc35_a9g20.c | 3 --- board/calao/tny_a9260/tny_a9260.c | 3 --- board/eukrea/cpuat91/cpuat91.c | 2 -- 8 files changed, 22 deletions(-) diff --git a/board/BuS/eb_cpux9k2/cpux9k2.c b/board/BuS/eb_cpux9k2/cpux9k2.c index 54f9b64..776226f 100644 --- a/board/BuS/eb_cpux9k2/cpux9k2.c +++ b/board/BuS/eb_cpux9k2/cpux9k2.c @@ -59,8 +59,6 @@ DECLARE_GLOBAL_DATA_PTR; int board_init(void) { at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - /* Enable Ctrlc */ - console_init_f(); /* Correct IRDA resistor problem / Set PA23_TXD in Output */ writel(ATMEL_PMX_AA_TXD2, &pio->pioa.oer); diff --git a/board/BuS/vl_ma2sc/vl_ma2sc.c b/board/BuS/vl_ma2sc/vl_ma2sc.c index 62ed6fb..84b2060 100644 --- a/board/BuS/vl_ma2sc/vl_ma2sc.c +++ b/board/BuS/vl_ma2sc/vl_ma2sc.c @@ -244,9 +244,6 @@ int board_init(void) writel(pin, &pio->piod.odr); writel(pin, &pio->piod.owdr); - /* Enable Ctrlc */ - console_init_f(); - gd->bd->bi_arch_number = MACH_TYPE_VL_MA2SC; /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c index 47ab839..d30a1ee 100644 --- a/board/atmel/at91sam9261ek/at91sam9261ek.c +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c @@ -242,9 +242,6 @@ void lcd_show_board_info(void) int board_init(void) { - /* Enable Ctrlc */ - console_init_f(); - #ifdef CONFIG_AT91SAM9G10EK /* arch number of AT91SAM9G10EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G10EK; diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c index 5a04274..d02312c 100644 --- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c +++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c @@ -258,9 +258,6 @@ int board_early_init_f(void) int board_init(void) { - /* Enable Ctrlc */ - console_init_f(); - /* arch number of AT91SAM9M10G45EK-Board */ #ifdef CONFIG_AT91SAM9M10G45EK gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9M10G45EK; diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c index ef0ddd7..e92ec6e 100644 --- a/board/atmel/at91sam9rlek/at91sam9rlek.c +++ b/board/atmel/at91sam9rlek/at91sam9rlek.c @@ -192,9 +192,6 @@ int board_early_init_f(void) int board_init(void) { - /* Enable Ctrlc */ - console_init_f(); - /* arch number of AT91SAM9RLEK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9RLEK; /* adress of boot parameters */ diff --git a/board/calao/sbc35_a9g20/sbc35_a9g20.c b/board/calao/sbc35_a9g20/sbc35_a9g20.c index b6c8791..d3b3684 100644 --- a/board/calao/sbc35_a9g20/sbc35_a9g20.c +++ b/board/calao/sbc35_a9g20/sbc35_a9g20.c @@ -149,9 +149,6 @@ static void sbc35_a9g20_macb_hw_init(void) int board_init(void) { - /* Enable Ctrlc */ - console_init_f(); - /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; diff --git a/board/calao/tny_a9260/tny_a9260.c b/board/calao/tny_a9260/tny_a9260.c index 31074d0..86e7e65 100644 --- a/board/calao/tny_a9260/tny_a9260.c +++ b/board/calao/tny_a9260/tny_a9260.c @@ -83,9 +83,6 @@ static void tny_a9260_nand_hw_init(void) int board_init(void) { - /* Enable Ctrlc */ - console_init_f(); - /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; diff --git a/board/eukrea/cpuat91/cpuat91.c b/board/eukrea/cpuat91/cpuat91.c index f654f87..c74c3fc 100644 --- a/board/eukrea/cpuat91/cpuat91.c +++ b/board/eukrea/cpuat91/cpuat91.c @@ -43,8 +43,6 @@ DECLARE_GLOBAL_DATA_PTR; int board_init(void) { - /* Enable Ctrlc */ - console_init_f(); /* arch number of CPUAT91-Board */ gd->bd->bi_arch_number = MACH_TYPE_CPUAT91; /* adress of boot parameters */ -- 1.7.10.4

4 5

[U-Boot] [PATCH] at91sam9263ek: remove unnecessary console_init_f
by Andreas Bießmann 01 Sep '12

01 Sep '12

From: Andreas Biesmann <andreas.devel(a)googlemail.com> Signed-off-by: Andreas Bießmann <andreas.devel(a)googlemail.com> cc: Stelian Pop <stelian(a)popies.net> --- board/atmel/at91sam9263ek/at91sam9263ek.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index 60ff1c0..abae93d 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -260,9 +260,6 @@ int board_early_init_f(void) int board_init(void) { - /* Enable Ctrlc */ - console_init_f(); - /* arch number of AT91SAM9263EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9263EK; /* adress of boot parameters */ -- 1.7.10.4

1 1

[U-Boot] [GIT PULL] Pull request: u-boot-imx
by Stefano Babic 01 Sep '12

01 Sep '12

Hi Albert, please pull from u-boot-imx, thanks. The following changes since commit 5f50310588e87f2ff501992564d1b05df71419f4: davinci, c6x: Always use C version of reset code (2012-08-25 13:40:03 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-imx.git master for you to fetch changes up to ff1728c902587c2dc76869a30a32013ef005b84a: mxs: Convert timeout parameter to 'unsigned int' (2012-08-27 08:28:01 +0200) ---------------------------------------------------------------- Ashok Kumar Reddy (1): mx6qarm2:Use IMX_GPIO_NR macro Benoît Thébaudeau (17): mxc_spi: Round up clock divider mx25: Enable dcache mx5: Enable dcache mx35: Fix typo on EDIO mx3: Fix typo on IPU_CONF_CSI_EN mx5/6 timer: Round up tick_to_time() value mx5: cosmetic: Clean up lowlevel_init mx35: Remove duplicate GPIO3_BASE_ADDR mx5/6: Fix cpu_mmc_init() return value mx35: Add cpu_mmc_init() mx5: Undeclare imx_decode_pll() mx35 iomux: Remove unused macro mx35: Fix broken pin definitions mx35: Remove declaration of non-existing function mx35: Move clock enums to clock.h mx35: Remove declaration of non-existing function mxc: Make gpio_get_value() use PSR Fabio Estevam (7): m28evk: Turn on caches apx4devkit: Turn on caches mx28evk: Remove unneeded 'undef' mxs: Use correct function name to initialize dram mx53loco: Use IMX_GPIO_NR macro mx51evk: Use IMX_GPIO_NR macro mx53ard: Use IMX_GPIO_NR macro Marek Vasut (7): MX28: Drop the cp15 reconfiguration from SPL MX28: Shuffle around the power management code MX28: DMA: Align the struct mxs_dma_desc MX28: DMA: Prolong the DMA timeout MX28: SPI: Supercharge the SPI driver MX28: m28evk: Align SSP clock speed MX28: m28evk: Enable SPI DMA Matt Sealey (7): spi: fix mxc_spi_slave structure allocation to clear memory spi: fix mxs_spi_slave structure allocation to clear memory mx5: add iomux-mx51.h include efikamx: move and rename Efika MX directories and config files to prepare for new boards efikamx: remove drive strength function and roll its functionality into the DCD efikamx: configure Smarttop PCBID and LED pads in DCD for convenience efikamx: update MAINTAINERS for Genesi Efika MX systems Otavio Salvador (9): mxs: Remove not required explicit iomux-mx28.h include mxs: Remove not required include of iomux-mx28.h mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h mxs: Convert sys_proto.h prefixes to 'mxs' MX28: config: Allow different target generation in elftosb call MX28: Move "regs-base.h" include after SoC type configuration mxs: Replace i.MX233 by i.MX23 on copyright header mxs: Only build internal Ethernet controller for i.MX28 mxs: Rename 'mx28_dram_init' to 'mxs_dram_init' Stefano Babic (1): MX: Set a common gpio.h for all i.MX Troy Kisky (4): iomux: move IOMUX_GPR13_xxx defines imx-common/cmd_bmode.c: add imx bmode (bootmode) command mx6qsabrelite: add boot_mode support mx53evk: add boot_mode support Vikram Narayanan (1): tx25: Use generic gpio_* calls fabio.estevam(a)freescale.com (1): mxs: Convert timeout parameter to 'unsigned int' trem (3): rtc: add support of mx27 rtc gpio: add gpio api support to mx27 (v4) imx27lite: update with gpio api change (v4) MAINTAINERS | 7 +- Makefile | 5 +- arch/arm/cpu/arm1136/mx35/generic.c | 19 ++- arch/arm/cpu/arm1136/mx35/iomux.c | 2 - arch/arm/cpu/arm926ejs/mx25/generic.c | 8 + arch/arm/cpu/arm926ejs/mx27/generic.c | 11 +- arch/arm/cpu/arm926ejs/mxs/mxs.c | 40 ++--- arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 7 +- arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 1 - arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 9 +- arch/arm/cpu/arm926ejs/mxs/start.S | 42 ----- arch/arm/cpu/arm926ejs/mxs/timer.c | 2 +- .../arm926ejs/mxs/{u-boot.bd => u-boot-imx28.bd} | 0 arch/arm/cpu/armv7/imx-common/Makefile | 1 + arch/arm/cpu/armv7/imx-common/cmd_bmode.c | 119 ++++++++++++++ arch/arm/cpu/armv7/imx-common/cpu.c | 6 +- arch/arm/cpu/armv7/imx-common/timer.c | 2 +- arch/arm/cpu/armv7/mx5/lowlevel_init.S | 46 +++--- arch/arm/cpu/armv7/mx5/soc.c | 39 +++++ arch/arm/cpu/armv7/mx6/soc.c | 36 +++++ arch/arm/include/asm/arch-mx25/gpio.h | 17 +- arch/arm/include/asm/arch-mx27/gpio.h | 55 +++++++ arch/arm/include/asm/arch-mx27/imx-regs.h | 33 ++-- arch/arm/include/asm/arch-mx27/regs-rtc.h | 40 +++++ arch/arm/include/asm/arch-mx31/gpio.h | 7 +- arch/arm/include/asm/arch-mx31/imx-regs.h | 2 +- arch/arm/include/asm/arch-mx35/clock.h | 28 +++- arch/arm/include/asm/arch-mx35/crm_regs.h | 4 +- arch/arm/include/asm/arch-mx35/gpio.h | 12 +- arch/arm/include/asm/arch-mx35/imx-regs.h | 29 +--- arch/arm/include/asm/arch-mx35/mx35_pins.h | 3 - arch/arm/include/asm/arch-mx35/sys_proto.h | 1 - arch/arm/include/asm/arch-mx5/clock.h | 2 - arch/arm/include/asm/arch-mx5/gpio.h | 7 +- arch/arm/include/asm/arch-mx5/imx-regs.h | 18 +++ arch/arm/include/asm/arch-mx5/iomux-mx51.h | 164 ++++++++++++++++++++ arch/arm/include/asm/arch-mx6/gpio.h | 7 +- arch/arm/include/asm/arch-mx6/imx-regs.h | 23 ++- arch/arm/include/asm/arch-mx6/iomux.h | 129 +++++++++++++++ arch/arm/include/asm/arch-mxs/dma.h | 3 +- arch/arm/include/asm/arch-mxs/imx-regs.h | 2 +- .../{regs-clkctrl.h => regs-clkctrl-mx28.h} | 0 arch/arm/include/asm/arch-mxs/sys_proto.h | 24 +-- arch/arm/include/asm/imx-common/boot_mode.h | 36 +++++ arch/arm/include/asm/imx-common/gpio.h | 39 +++++ arch/arm/include/asm/imx-common/iomux-v3.h | 111 ------------- board/CarMediaLab/flea3/flea3.c | 6 +- board/bluegiga/apx4devkit/apx4devkit.c | 4 +- board/denx/m28evk/m28evk.c | 6 +- board/freescale/mx28evk/mx28evk.c | 2 +- board/freescale/mx35pdk/mx35pdk.c | 2 +- board/freescale/mx51evk/mx51evk.c | 6 +- board/freescale/mx53ard/mx53ard.c | 2 +- board/freescale/mx53evk/mx53evk.c | 13 ++ board/freescale/mx53loco/mx53loco.c | 2 +- board/freescale/mx6qarm2/mx6qarm2.c | 4 +- board/freescale/mx6qsabrelite/mx6qsabrelite.c | 43 +++-- board/{efikamx => genesi/mx51_efikamx}/Makefile | 0 .../{efikamx => genesi/mx51_efikamx}/efikamx-usb.c | 2 +- board/{efikamx => genesi/mx51_efikamx}/efikamx.c | 77 --------- .../mx51_efikamx}/imximage_mx.cfg | 50 +++--- .../mx51_efikamx}/imximage_sb.cfg | 0 board/karo/tx25/tx25.c | 25 ++- board/logicpd/imx27lite/imx27lite.c | 5 +- board/schulercontrol/sc_sps_1/sc_sps_1.c | 2 +- board/syteco/zmx25/zmx25.c | 26 ++-- boards.cfg | 4 +- drivers/dma/apbh_dma.c | 6 +- drivers/gpio/mxc_gpio.c | 10 +- drivers/i2c/mxs_i2c.c | 2 +- drivers/mmc/mxsmmc.c | 2 +- drivers/mtd/nand/mxs_nand.c | 6 +- drivers/rtc/Makefile | 1 + drivers/rtc/mx27rtc.c | 83 ++++++++++ drivers/rtc/mxsrtc.c | 4 +- drivers/spi/mxc_spi.c | 6 +- drivers/spi/mxs_spi.c | 106 ++++++++----- drivers/usb/host/ehci-mxs.c | 2 +- include/configs/apx4devkit.h | 6 +- include/configs/imx27lite-common.h | 5 + include/configs/m28evk.h | 11 +- include/configs/mx28evk.h | 6 +- include/configs/{efikamx.h => mx51_efikamx.h} | 0 include/configs/mx53evk.h | 3 + include/configs/mx6qsabrelite.h | 6 +- include/configs/sc_sps_1.h | 4 +- 86 files changed, 1163 insertions(+), 585 deletions(-) rename arch/arm/cpu/arm926ejs/mxs/{u-boot.bd => u-boot-imx28.bd} (100%) create mode 100644 arch/arm/cpu/armv7/imx-common/cmd_bmode.c create mode 100644 arch/arm/include/asm/arch-mx27/gpio.h create mode 100644 arch/arm/include/asm/arch-mx27/regs-rtc.h create mode 100644 arch/arm/include/asm/arch-mx5/iomux-mx51.h create mode 100644 arch/arm/include/asm/arch-mx6/iomux.h rename arch/arm/include/asm/arch-mxs/{regs-clkctrl.h => regs-clkctrl-mx28.h} (100%) create mode 100644 arch/arm/include/asm/imx-common/boot_mode.h create mode 100644 arch/arm/include/asm/imx-common/gpio.h rename board/{efikamx => genesi/mx51_efikamx}/Makefile (100%) rename board/{efikamx => genesi/mx51_efikamx}/efikamx-usb.c (99%) rename board/{efikamx => genesi/mx51_efikamx}/efikamx.c (85%) rename board/{efikamx => genesi/mx51_efikamx}/imximage_mx.cfg (71%) rename board/{efikamx => genesi/mx51_efikamx}/imximage_sb.cfg (100%) create mode 100644 drivers/rtc/mx27rtc.c rename include/configs/{efikamx.h => mx51_efikamx.h} (100%) -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic(a)denx.de =====================================================================

2 1

[U-Boot] [PATCH] Credits for MCF5249 initialization code
by Jeremy Andrus 01 Sep '12

01 Sep '12

diff --git a/CREDITS b/CREDITS index 933104c..fa9a14e 100644 --- a/CREDITS +++ b/CREDITS @@ -428,6 +428,11 @@ E: art(a)videon-central.com D: Support for NetSilicon NS7520 D: Support for ColdFire MCF5275 +N: Jeremy C. Andrus +E: jeremy(a)jeremya.com +D: ColdFire MCF5249 initialization code +W: jeremya.com + N: Michal Simek E: monstr(a)monstr.eu D: Support for Microblaze, ML401, XUPV2P board -- 1.7.9.6 (Apple Git-31.1)

2 1

[U-Boot] [[Patch V2] mips: 00/16] add mips64 support to U-Boot
by Zhizhou Zhang 01 Sep '12

01 Sep '12

This patch add mips64 support. --- Change log for V2: - move mips64 build flags to cpu/mips64.mk - add cache size probe - remove cache.S Zhizhou Zhang (16): add mips64 standalone support add cpu/mips64/Makefile add cpu/mips64/config.mk add cpu/mips64/cpu.c add cpu/mips64/interrupts.c add cpu/mips64/start.S add cpu/mips64/time.c Let UNCACHED_SDRAM be available to mips64 add cache description struct modify io operation for mips64 Make size_t equaled to unsigned long modify u-boot.lds for mips64 add board define in boards.cfg add mips64 standalone link script add configs/qemu-mips64.h modify qemu-mips/config.mk arch/mips/config.mk | 4 + arch/mips/cpu/mips64/Makefile | 47 +++++ arch/mips/cpu/mips64/config.mk | 39 ++++ arch/mips/cpu/mips64/cpu.c | 133 +++++++++++++ arch/mips/cpu/mips64/interrupts.c | 39 ++++ arch/mips/cpu/mips64/start.S | 373 +++++++++++++++++++++++++++++++++++ arch/mips/cpu/mips64/time.c | 86 ++++++++ arch/mips/include/asm/addrspace.h | 2 +- arch/mips/include/asm/cache.h | 11 ++ arch/mips/include/asm/io.h | 18 +- arch/mips/include/asm/posix_types.h | 12 +- board/qemu-mips/config.mk | 3 +- board/qemu-mips/u-boot.lds | 8 + boards.cfg | 1 + examples/standalone/mips64.lds | 59 ++++++ include/configs/qemu-mips64.h | 171 ++++++++++++++++ 16 files changed, 1000 insertions(+), 6 deletions(-) create mode 100644 arch/mips/cpu/mips64/Makefile create mode 100644 arch/mips/cpu/mips64/config.mk create mode 100644 arch/mips/cpu/mips64/cpu.c create mode 100644 arch/mips/cpu/mips64/interrupts.c create mode 100644 arch/mips/cpu/mips64/start.S create mode 100644 arch/mips/cpu/mips64/time.c create mode 100644 examples/standalone/mips64.lds create mode 100644 include/configs/qemu-mips64.h -- 1.7.9.5

6 52