November 2012 - U-Boot

[U-Boot] Pull request: u-boot-staging
by Anatolij Gustschin 19 Nov '12

19 Nov '12

Hello Tom, The following changes since commit 1cc619be8b73abbee2fd6faf2cd4ade27b516531: Merge branch 'master' of git://git.denx.de/u-boot-avr32 (2012-11-05 09:46:45 -0700) are available in the git repository at: git://git.denx.de/u-boot-staging.git agust(a)denx.de Alejandro Mery (1): fs: zfs: fix illegal use of fp Andreas Bießmann (2): Makefile: silence 'make clean' fs/fs.c: do_fsload: measure throughput Jens Scharsig (BuS Elektronik) (1): M68K: eb_cpu5282: general update and enhanced board support Robert P. J. Day (1): cmd_mmc.c: Fix typo, "dislay" -> "display" Scott Wood (1): nand_spl: fix u-boot.lst breakage Simon Glass (1): patman: Issue empty change logs for unchanged patches Stefan Roese (1): MAKEALL: Add spear platform target to compile all SPEAr boards Łukasz Majewski (26): pmic:i2c: Handle PMIC I2C transmission comprising of two bytes pmic:i2c: Add I2C sensor byte order (big/little) to PMIC framework pmic:max8997: Switch the MAX8997 PMIC to be used with multibus I2C pmic: Extend PMIC framework to support multiple instances of PMIC devices pmic: Introduce power_init_board() method at ./lib/board.c file pmic: Enable power_board_init() support at TRATS pmic:chrg: Common information about charger and battery (power_chrg.h) pmic: Move pmic related code to ./drivers/power directory pmic: Extend struct pmic to support battery and charger related operations pmic:battery: Support for Trats Battery at PMIC framework pmic:muic: Support for MUIC built into MAX8997 device pmic:fuel-gauge: Support for MAX17042 fuel-gauge pmic:max8997: Function for calculating LDO internal register value arm:trats:pmic: Default PMIC(MAX8997) initialization for Samsung's TRATS board arm:trats:pmic: Enable MUIC (MAX8997) at Samsung's TRATS board arm:trats:pmic: Enable fuel-gauge (MAX17042) at Samsung's TRATS board arm:trats:pmic: Enable battery support at Samsung's TRATS board pmic:max8997: Support for MAX8997 internal charger control arm:trats:pmic: Power consumption reduction state for Samsung's TRATS board arm:trats:pmic: Support for charging battery at Samsung's TRATS board pmic: Extend PMIC framework to support battery related commands power:pmic: Rename ./drivers/power/pmic_* to ./drivers/power/power_* files power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWER power:pmic: Rename CONFIG_DIALOG_PMIC defines to CONFIG_DIALOG_POWER arm:goni:pmic: Adjust GONI target platform board to new PMIC framework arm:universal_c210:pmic: Adjust C210 Universal target platform board to new PMIC framework MAKEALL | 6 + Makefile | 7 +- arch/arm/lib/board.c | 8 + board/BuS/eb_cpu5282/Makefile | 2 +- board/BuS/eb_cpu5282/cfm_flash.c | 212 ---------- board/BuS/eb_cpu5282/cfm_flash.h | 40 -- board/BuS/eb_cpu5282/eb_cpu5282.c | 110 ++++-- board/BuS/eb_cpu5282/flash.c | 415 -------------------- board/davedenx/qong/qong.c | 12 +- board/freescale/mx31pdk/mx31pdk.c | 12 +- board/freescale/mx35pdk/mx35pdk.c | 14 +- board/freescale/mx51evk/mx51evk.c | 12 +- board/freescale/mx53evk/mx53evk.c | 12 +- board/freescale/mx53loco/mx53loco.c | 21 +- board/genesi/mx51_efikamx/efikamx.c | 12 +- board/hale/tt01/tt01.c | 14 +- board/samsung/goni/goni.c | 22 +- board/samsung/trats/trats.c | 292 +++++++++++++- board/samsung/universal_c210/universal.c | 27 +- board/ttcontrol/vision2/vision2.c | 12 +- boards.cfg | 2 +- common/cmd_mmc.c | 2 +- drivers/misc/Makefile | 7 - drivers/misc/pmic_core.c | 147 ------- drivers/power/Makefile | 12 +- .../config.mk => drivers/power/battery/Makefile | 34 ++- drivers/power/battery/bat_trats.c | 100 +++++ .../config.mk => drivers/power/fuel_gauge/Makefile | 34 ++- drivers/power/fuel_gauge/fg_max17042.c | 250 ++++++++++++ drivers/power/pmic/Makefile | 49 +++ drivers/power/pmic/muic_max8997.c | 90 +++++ drivers/power/pmic/pmic_max8997.c | 123 ++++++ drivers/{misc => power/pmic}/pmic_max8998.c | 16 +- drivers/power/power_core.c | 232 +++++++++++ .../{misc/pmic_dialog.c => power/power_dialog.c} | 14 +- drivers/{misc/pmic_fsl.c => power/power_fsl.c} | 22 +- drivers/{misc/pmic_i2c.c => power/power_i2c.c} | 47 ++- drivers/{misc/pmic_spi.c => power/power_spi.c} | 4 +- drivers/rtc/mc13xxx-rtc.c | 10 +- fs/fs.c | 11 +- fs/zfs/zfs.c | 4 +- include/configs/eb_cpu5282.h | 102 +++-- include/configs/imx31_litekit.h | 6 +- include/configs/mx31ads.h | 6 +- include/configs/mx31pdk.h | 6 +- include/configs/mx35pdk.h | 6 +- include/configs/mx51_efikamx.h | 6 +- include/configs/mx51evk.h | 6 +- include/configs/mx53evk.h | 6 +- include/configs/mx53loco.h | 8 +- include/configs/qong.h | 6 +- include/configs/s5p_goni.h | 6 +- include/configs/s5pc210_universal.h | 6 +- include/configs/trats.h | 14 +- include/configs/tt01.h | 6 +- include/configs/vision2.h | 6 +- include/pmic.h | 72 ---- .../misc/pmic_max8997.c => include/power/battery.h | 29 +- .../power/fg_battery_cell_params.h | 79 +++- include/power/max17042_fg.h | 74 ++++ include/power/max8997_muic.h | 61 +++ include/{ => power}/max8997_pmic.h | 26 ++- include/{ => power}/max8998_pmic.h | 0 include/power/pmic.h | 109 +++++ .../pmic_max8997.c => include/power/power_chrg.h | 34 +- nand_spl/board/freescale/mpc8536ds/Makefile | 3 +- nand_spl/board/freescale/mpc8569mds/Makefile | 3 +- nand_spl/board/freescale/mpc8572ds/Makefile | 3 +- nand_spl/board/freescale/mx31pdk/Makefile | 3 +- nand_spl/board/freescale/p1010rdb/Makefile | 3 +- nand_spl/board/freescale/p1023rds/Makefile | 3 +- nand_spl/board/freescale/p1_p2_rdb/Makefile | 3 +- nand_spl/board/karo/tx25/Makefile | 3 +- tools/patman/series.py | 21 +- 74 files changed, 2016 insertions(+), 1181 deletions(-) delete mode 100644 board/BuS/eb_cpu5282/cfm_flash.c delete mode 100644 board/BuS/eb_cpu5282/cfm_flash.h delete mode 100644 board/BuS/eb_cpu5282/flash.c delete mode 100644 drivers/misc/pmic_core.c copy board/BuS/eb_cpu5282/config.mk => drivers/power/battery/Makefile (52%) create mode 100644 drivers/power/battery/bat_trats.c rename board/BuS/eb_cpu5282/config.mk => drivers/power/fuel_gauge/Makefile (52%) create mode 100644 drivers/power/fuel_gauge/fg_max17042.c create mode 100644 drivers/power/pmic/Makefile create mode 100644 drivers/power/pmic/muic_max8997.c create mode 100644 drivers/power/pmic/pmic_max8997.c rename drivers/{misc => power/pmic}/pmic_max8998.c (82%) create mode 100644 drivers/power/power_core.c rename drivers/{misc/pmic_dialog.c => power/power_dialog.c} (81%) rename drivers/{misc/pmic_fsl.c => power/power_fsl.c} (81%) rename drivers/{misc/pmic_i2c.c => power/power_i2c.c} (62%) rename drivers/{misc/pmic_spi.c => power/power_spi.c} (97%) delete mode 100644 include/pmic.h copy drivers/misc/pmic_max8997.c => include/power/battery.h (71%) copy drivers/misc/pmic_max8997.c => include/power/fg_battery_cell_params.h (50%) create mode 100644 include/power/max17042_fg.h create mode 100644 include/power/max8997_muic.h rename include/{ => power}/max8997_pmic.h (88%) rename include/{ => power}/max8998_pmic.h (100%) create mode 100644 include/power/pmic.h rename drivers/misc/pmic_max8997.c => include/power/power_chrg.h (71%) Please pull. Thanks! Anatolij

2 1

[U-Boot] Pull request: u-boot-nios/master
by Thomas Chou 19 Nov '12

19 Nov '12

Hi Tom, Please add these patches to fix the compilation error of nios2 arch after v2013.01-rc1. Best regards, Thomas The following changes since commit 59852d03867108217fe88e3bfc3e1e9cedfe63c5: Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze (2012-11-09 08:47:25 -0700) are available in the git repository at: git://git.denx.de/u-boot-nios.git master for you to fetch changes up to db71964235c1dfa13ec398da483b0bdbbf31d5b7: nios2: remove asm/status_led.h (2012-11-10 19:45:58 +0800) ---------------------------------------------------------------- Thomas Chou (2): nios2: use builtin functions for control registers access nios2: remove asm/status_led.h arch/nios2/include/asm/status_led.h | 31 ------------------------------- include/configs/PK1C20.h | 1 + include/configs/nios2-generic.h | 1 + include/nios2.h | 12 ++---------- include/status_led.h | 3 --- 5 files changed, 4 insertions(+), 44 deletions(-) delete mode 100644 arch/nios2/include/asm/status_led.h

2 1

[U-Boot] [PATCH 1/4] mx5: cosmetic: Clean up lowlevel_init
by Benoît Thébaudeau 19 Nov '12

19 Nov '12

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau(a)advansee.com> Cc: Stefano Babic <sbabic(a)denx.de> --- .../arch/arm/cpu/armv7/mx5/lowlevel_init.S | 46 ++++++++++---------- 1 file changed, 23 insertions(+), 23 deletions(-) diff --git u-boot-4d3c95f.orig/arch/arm/cpu/armv7/mx5/lowlevel_init.S u-boot-4d3c95f/arch/arm/cpu/armv7/mx5/lowlevel_init.S index 683a7b5..a40b84f 100644 --- u-boot-4d3c95f.orig/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ u-boot-4d3c95f/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -36,9 +36,9 @@ /* reconfigure L2 cache aux control reg */ mov r0, #0xC0 /* tag RAM */ add r0, r0, #0x4 /* data RAM */ - orr r0, r0, #(1 << 24) /* disable write allocate delay */ - orr r0, r0, #(1 << 23) /* disable write allocate combine */ - orr r0, r0, #(1 << 22) /* disable write allocate */ + orr r0, r0, #1 << 24 /* disable write allocate delay */ + orr r0, r0, #1 << 23 /* disable write allocate combine */ + orr r0, r0, #1 << 22 /* disable write allocate */ #if defined(CONFIG_MX51) ldr r1, =0x0 @@ -46,7 +46,7 @@ cmp r3, #0x10 /* disable write combine for TO 2 and lower revs */ - orrls r0, r0, #(1 << 25) + orrls r0, r0, #1 << 25 #endif mcr 15, 1, r0, c9, c0, 2 @@ -247,9 +247,9 @@ movhi r1, #0 #else mov r1, #0 - #endif str r1, [r0, #CLKCTL_CACRR] + /* Switch ARM back to PLL 1 */ mov r1, #0 str r1, [r0, #CLKCTL_CCSR] @@ -288,9 +288,9 @@ /* Switch peripheral to PLL2 */ ldr r0, =CCM_BASE_ADDR ldr r1, =0x00808145 - orr r1, r1, #(2 << 10) - orr r1, r1, #(0 << 16) - orr r1, r1, #(1 << 19) + orr r1, r1, #2 << 10 + orr r1, r1, #0 << 16 + orr r1, r1, #1 << 19 str r1, [r0, #CLKCTL_CBCDR] ldr r1, =0x00016154 @@ -331,10 +331,10 @@ ENTRY(lowlevel_init) #if defined(CONFIG_MX51) ldr r0, =GPIO1_BASE_ADDR ldr r1, [r0, #0x0] - orr r1, r1, #(1 << 23) + orr r1, r1, #1 << 23 str r1, [r0, #0x0] ldr r1, [r0, #0x4] - orr r1, r1, #(1 << 23) + orr r1, r1, #1 << 23 str r1, [r0, #0x4] #endif @@ -351,16 +351,16 @@ ENTRY(lowlevel_init) ENDPROC(lowlevel_init) /* Board level setting value */ -W_DP_OP_864: .word DP_OP_864 -W_DP_MFD_864: .word DP_MFD_864 -W_DP_MFN_864: .word DP_MFN_864 -W_DP_MFN_800_DIT: .word DP_MFN_800_DIT -W_DP_OP_800: .word DP_OP_800 -W_DP_MFD_800: .word DP_MFD_800 -W_DP_MFN_800: .word DP_MFN_800 -W_DP_OP_665: .word DP_OP_665 -W_DP_MFD_665: .word DP_MFD_665 -W_DP_MFN_665: .word DP_MFN_665 -W_DP_OP_216: .word DP_OP_216 -W_DP_MFD_216: .word DP_MFD_216 -W_DP_MFN_216: .word DP_MFN_216 +W_DP_OP_864: .word DP_OP_864 +W_DP_MFD_864: .word DP_MFD_864 +W_DP_MFN_864: .word DP_MFN_864 +W_DP_MFN_800_DIT: .word DP_MFN_800_DIT +W_DP_OP_800: .word DP_OP_800 +W_DP_MFD_800: .word DP_MFD_800 +W_DP_MFN_800: .word DP_MFN_800 +W_DP_OP_665: .word DP_OP_665 +W_DP_MFD_665: .word DP_MFD_665 +W_DP_MFN_665: .word DP_MFN_665 +W_DP_OP_216: .word DP_OP_216 +W_DP_MFD_216: .word DP_MFD_216 +W_DP_MFN_216: .word DP_MFN_216

3 21

[U-Boot] [PATCH] ehci-mxc: Fix host power mask bit for i.MX35
by Benoît Thébaudeau 19 Nov '12

19 Nov '12

The correct bit for H1_PM is 16, not 8, which is the DP pull-up impedance selection bit. This issue has been reported by Michael Burkey <mdburkey(a)gmail.com> and fixed by Christoph Fritz <chf.fritz(a)googlemail.com> on Linux, from which these #define-s had been copied. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau(a)advansee.com> Cc: Stefano Babic <sbabic(a)denx.de> Cc: Marek Vasut <marex(a)denx.de> --- .../drivers/usb/host/ehci-mxc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git u-boot-imx-f22e4fa.orig/drivers/usb/host/ehci-mxc.c u-boot-imx-f22e4fa/drivers/usb/host/ehci-mxc.c index 7c5f71c..f2642a0 100644 --- u-boot-imx-f22e4fa.orig/drivers/usb/host/ehci-mxc.c +++ u-boot-imx-f22e4fa/drivers/usb/host/ehci-mxc.c @@ -67,7 +67,7 @@ #define MX35_H1_SIC_SHIFT 21 #define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) #define MX35_H1_PP_BIT (1 << 18) -#define MX35_H1_PM_BIT (1 << 8) +#define MX35_H1_PM_BIT (1 << 16) #define MX35_H1_IPPUE_UP_BIT (1 << 7) #define MX35_H1_IPPUE_DOWN_BIT (1 << 6) #define MX35_H1_TLL_BIT (1 << 5)

2 2

[U-Boot] [PATCH] ehci-mxc: Fix host power mask bit for i.MX25
by Benoît Thébaudeau 19 Nov '12

19 Nov '12

The correct bit for H1_PM is 16, not 8, which is the DP pull-up impedance selection bit. This issue has been reported by Eric Bénard <eric(a)eukrea.com> and fixed by Christoph Fritz <chf.fritz(a)googlemail.com> on Linux, from which these #define-s had been copied. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau(a)advansee.com> Cc: Stefano Babic <sbabic(a)denx.de> Cc: Marek Vasut <marex(a)denx.de> --- .../drivers/usb/host/ehci-mxc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git u-boot-imx-f22e4fa.orig/drivers/usb/host/ehci-mxc.c u-boot-imx-f22e4fa/drivers/usb/host/ehci-mxc.c index 7c5f71c..352ad86 100644 --- u-boot-imx-f22e4fa.orig/drivers/usb/host/ehci-mxc.c +++ u-boot-imx-f22e4fa/drivers/usb/host/ehci-mxc.c @@ -37,7 +37,7 @@ #define MX25_H1_SIC_SHIFT 21 #define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) #define MX25_H1_PP_BIT (1 << 18) -#define MX25_H1_PM_BIT (1 << 8) +#define MX25_H1_PM_BIT (1 << 16) #define MX25_H1_IPPUE_UP_BIT (1 << 7) #define MX25_H1_IPPUE_DOWN_BIT (1 << 6) #define MX25_H1_TLL_BIT (1 << 5)

2 1

[U-Boot] [PATCH 1/4] mx5: Align SPI CS naming with i.MX53 reference manual
by Fabio Estevam 19 Nov '12

19 Nov '12

From: Fabio Estevam <fabio.estevam(a)freescale.com> Align SPI chip select naming with i.MX53 reference manual. Signed-off-by: Fabio Estevam <fabio.estevam(a)freescale.com> --- arch/arm/include/asm/arch-mx5/mx5x_pins.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/include/asm/arch-mx5/mx5x_pins.h b/arch/arm/include/asm/arch-mx5/mx5x_pins.h index 122fbee..3457f6a 100644 --- a/arch/arm/include/asm/arch-mx5/mx5x_pins.h +++ b/arch/arm/include/asm/arch-mx5/mx5x_pins.h @@ -802,22 +802,22 @@ typedef enum iomux_input_select { MX53_CSPI_IPP_CSPI_CLK_IN_SELECT_INPUT, MX53_CSPI_IPP_IND_MISO_SELECT_INPUT, MX53_CSPI_IPP_IND_MOSI_SELECT_INPUT, + MX53_CSPI_IPP_IND_SS_B_0_SELECT_INPUT, MX53_CSPI_IPP_IND_SS_B_1_SELECT_INPUT, MX53_CSPI_IPP_IND_SS_B_2_SELECT_INPUT, MX53_CSPI_IPP_IND_SS_B_3_SELECT_INPUT, - MX53_CSPI_IPP_IND_SS_B_4_SELECT_INPUT, MX53_ECSPI1_IPP_CSPI_CLK_IN_SELECT_INPUT, MX53_ECSPI1_IPP_IND_MISO_SELECT_INPUT, MX53_ECSPI1_IPP_IND_MOSI_SELECT_INPUT, + MX53_ECSPI1_IPP_IND_SS_B_0_SELECT_INPUT, MX53_ECSPI1_IPP_IND_SS_B_1_SELECT_INPUT, MX53_ECSPI1_IPP_IND_SS_B_2_SELECT_INPUT, MX53_ECSPI1_IPP_IND_SS_B_3_SELECT_INPUT, - MX53_ECSPI1_IPP_IND_SS_B_4_SELECT_INPUT, MX53_ECSPI2_IPP_CSPI_CLK_IN_SELECT_INPUT, MX53_ECSPI2_IPP_IND_MISO_SELECT_INPUT, MX53_ECSPI2_IPP_IND_MOSI_SELECT_INPUT, + MX53_ECSPI2_IPP_IND_SS_B_0_SELECT_INPUT, MX53_ECSPI2_IPP_IND_SS_B_1_SELECT_INPUT, - MX53_ECSPI2_IPP_IND_SS_B_2_SELECT_INPUT, MX53_ESAI1_IPP_IND_FSR_SELECT_INPUT, MX53_ESAI1_IPP_IND_FST_SELECT_INPUT, MX53_ESAI1_IPP_IND_HCKR_SELECT_INPUT, -- 1.7.9.5

3 8

[U-Boot] [PATCH 0/8 v3] Add TMU support for Exynos5250 based SMDK5250
by Hatim Ali 19 Nov '12

19 Nov '12

This patch series adds support for TMU driver using device tree for Exynos5250 based SMDK5250 board. This patch series is dependent on the patch series "Add DT based ethernet driver for SMDK5250" by Hatim Ali Changes since v2: - Replaced THERMAL with TMU in guards of tmu.h and exynos-tmu.h - Updated Monitor Commands in README Akshay Saraswat (6): EXYNOS5: FDT: Add TMU device node values EXYNOS5: TMU: Add driver for Thermal Management Unit EXYNOS5: Power down API for Thermal Management Unit Add a poll function to monitor events EXYNOS5: TMU: Add TMU status polling EXYNOS5: Config: Enable support for Exynos TMU driver Alim Akhtar (2): TMU: Add u-boot command to read current temp EXYNOS5: Config: Enable tmu command README | 8 + arch/arm/cpu/armv7/exynos/power.c | 15 ++ arch/arm/dts/exynos5250.dtsi | 5 + arch/arm/include/asm/arch-exynos/exynos-tmu.h | 58 +++++ arch/arm/include/asm/arch-exynos/power.h | 8 + board/samsung/dts/exynos5250-smdk5250.dts | 13 + board/samsung/smdk5250/smdk5250.c | 36 +++ common/Makefile | 1 + common/cmd_tmu.c | 51 +++++ common/console.c | 5 + doc/device-tree-bindings/exynos/tmu.txt | 35 +++ drivers/power/Makefile | 1 + drivers/power/exynos-tmu.c | 297 +++++++++++++++++++++++++ include/common.h | 6 + include/configs/exynos5250-dt.h | 7 + include/fdtdec.h | 1 + include/tmu.h | 46 ++++ lib/fdtdec.c | 1 + 18 files changed, 594 insertions(+), 0 deletions(-) create mode 100644 arch/arm/include/asm/arch-exynos/exynos-tmu.h create mode 100644 common/cmd_tmu.c create mode 100644 doc/device-tree-bindings/exynos/tmu.txt create mode 100644 drivers/power/exynos-tmu.c create mode 100644 include/tmu.h -- 1.7.2.3

3 10

Re: [U-Boot] [PATCH 0/5 v2] Add DT based ethernet driver for SMDK5250
by Hatim Rv 19 Nov '12

19 Nov '12

Hello, Are there any other comments on this patch series? Can these be merged with the u-boot-samsung? Regards, Hatim Ali ---------- Forwarded message ---------- From: Simon Glass <sjg(a)chromium.org> Date: Wed, Nov 7, 2012 at 5:18 AM Subject: Re: [U-Boot] [PATCH 0/5 v2] Add DT based ethernet driver for SMDK5250 To: Hatim Ali <hatim.rv(a)samsung.com> Cc: u-boot(a)lists.denx.de Hi Katin, On Tue, Nov 6, 2012 at 2:13 AM, Hatim Ali <hatim.rv(a)samsung.com> wrote: > This patch series enables the DT support on SMDK5250. > Ethernet is the first driver whose discovery is based on DT node. > More DT based drivers to be added subsequently > > Changes since v1: > - Renamed the smdk5250.h file to exynos5250-dt.h to create a common > configuration file which can be used by all the boards based on > exynos5250 using Device Tree. > - Created a new smdk5250.h file specifying the dts file specific to > SMDK5250 > - Incorporated minor nit (removal of blank lines) I went through this series again, and it looks good to me. The series: Acked-by: Simon Glass <sjg(a)chromium.org> > > Hatim Ali (5): > EXYNOS5: FDT: add initial dts file for EXYNOS5250, SMDK5250 > fdt: exynos5: Add DT node definition for SROM and SMSC9215 > exynos5: Add DT based driver for SMC911X ethernet > exynos5: config: Rename the smdk5250.h to exynos5250-dt.h > SMDK5250: config: Add configuration file for SMDK5250 board > > arch/arm/dts/exynos5250.dtsi | 31 ++++ > arch/arm/include/asm/arch-exynos/sromc.h | 18 ++ > board/samsung/dts/exynos5250-smdk5250.dts | 29 +++ > board/samsung/smdk5250/smdk5250.c | 115 +++++++++---- > include/configs/exynos5250-dt.h | 267 +++++++++++++++++++++++++++++ > include/configs/smdk5250.h | 245 +------------------------- > include/fdtdec.h | 2 + > lib/fdtdec.c | 2 + > 8 files changed, 442 insertions(+), 267 deletions(-) > create mode 100644 arch/arm/dts/exynos5250.dtsi > create mode 100644 board/samsung/dts/exynos5250-smdk5250.dts > create mode 100644 include/configs/exynos5250-dt.h > > -- > 1.7.2.3 > Regards, Simon _______________________________________________ U-Boot mailing list U-Boot(a)lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

1 0

[U-Boot] ping failed; host 192.168.1.101 is not alive
by akdas75 19 Nov '12

19 Nov '12

Hi http://old.nabble.com/file/p34608548/uboot-log.rtf uboot-log.rtf I am using beagle board C4 with zippy expansion board. I am able to do NFS at the kernel level. I want to o tftp at the u-boot level. my beagle board is connected to the host via cross ethernet cable. the phy chip is enc28j60. when i ping the host it says host not alive. i have attached the env variables please help -- View this message in context: http://old.nabble.com/ping-failed--host-192.168.1.101-is-not-alive-tp346085… Sent from the Uboot - Users mailing list archive at Nabble.com.

3 10

[U-Boot] sam9x5 can't find Nand flash
by alex 19 Nov '12

19 Nov '12

Hi MAINTAINER: Now I develop our product based on sam9x25 EVK, and redefine our NAND partitions. I set u-boot environment in flash address0x80000. if "saveenv" and "reset", u-boot will print "can't find NAND flash". If I set u-boot environment in the address 0xc0000 as EVK board, it's OK. I cant' know the reason. Best Regards, Alex

2 1