November 2012 - U-Boot

[U-Boot] [PATCH 0/4] EXYNOS5: Add GPIO numbering feature
by Rajeshwari Shinde 20 Nov '12

20 Nov '12

This patchset adds GPIO numbering feature where pinmux setting can be done just by seding the pin munber and we do not have to remember which bank it belongs to. Rajeshwari Shinde (4): EXYNOS5: Add GPIO unique pin numbering support S5P: GPIO: Add GPIO pin numbering to driver EXYNOS5: Enable GPIO Numbering. EXYNOS: Update pinmux to use gpio numbering arch/arm/cpu/armv7/exynos/pinmux.c | 150 ++++++-------- arch/arm/include/asm/arch-exynos/gpio.h | 351 +++++++++++++++++++++++++++++++ drivers/gpio/s5p_gpio.c | 158 +++++++++++++- include/configs/smdk5250.h | 3 + 4 files changed, 569 insertions(+), 93 deletions(-) -- 1.7.4.4

4 8

[U-Boot] [PATCH 0/6] Bring new I2C framwork to Samsung Trats board
by Piotr Wilczek 20 Nov '12

20 Nov '12

This patchset brings new I2C framework to Samsung Trats board. It is intended to test the framework, please don't merge. I2C clock, spacing and pinmux are added for Exynos4. The s3c24x0 i2c driver is modified to support both Exynos4. The s3c24x0 i2c driver is modiefied for the new I2C framework. Configs for VCMA9.h and smdk5250.h boards are modified. Boards compile successfully but were not tested. New i2c framework is enabled and tested on Samsung Trats board. Piotr Wilczek (6): exynos:clock: Add i2c clock exynos:cpu: Add Exynos4 I2C spacing exynos:pinmux: Add pinmux support for i2c drivers:i2c: Modify I2C driver for Exynos4 WIP: i2c: s3c24x0: modify driver for new I2C framework WIP: arm: trats: add support for new I2C framework arch/arm/cpu/armv7/exynos/clock.c | 17 ++++ arch/arm/cpu/armv7/exynos/pinmux.c | 64 ++++++++++++++ arch/arm/include/asm/arch-exynos/cpu.h | 2 + board/samsung/trats/trats.c | 26 +++++- drivers/i2c/i2c_core.c | 5 + drivers/i2c/s3c24x0_i2c.c | 148 ++++++++++++++++++++++++++++---- include/configs/VCMA9.h | 4 + include/configs/smdk5250.h | 4 + include/configs/trats.h | 16 +++- 9 files changed, 263 insertions(+), 23 deletions(-) -- 1.7.5.4

2 17

Re: [U-Boot] [PATCH 00/46] Enhance spear support
by Vipin Kumar 20 Nov '12

20 Nov '12

Hello u-boot team, Can you please provide some comments on this patch-set Please consider this for inclusion Regards Vipin On 11/2/2012 11:09 PM, Vipin KUMAR wrote: > This patchset is split in several pieces > - Drivers: This is essentially a few new drivers and fixes in already exiasting > drivers > - Enhancement: This series enhances the already existing spear support > - spear13xx: This is a totally new suppoort for spear13xx architecture > > Armando Visconti (2): > mtd/st_smi: Add support for Micron N25Q128 Flash > spi/arm-pl022: Add support for ARM PL022 spi controller > > Pratyush Anand (1): > usb/gadget/designware_otg: Add support for designware otg > > Shiraz Hashim (3): > usbtty: adapt buffers for large packet support > net/macb: Add arch specific routine to get mdio control > net/macb: workaround for transmission hang issue > > Vipin Kumar (40): > mtd/st_smi: Clear error flags while initiating a fresh write > mtd/st_smi: Avoid issuing multiple WE commands > mtd/st_smi: Write to flash in a tight loop > mtd/st_smi: Use page sizes respective to flash > usbh/ehci: Increase timeout for enumeration > sdhci: Add sdhci support for spear devices > net/designware: Do not select MIIPORT for RGMII interface > usb/host/ehci: Add support for EHCI on spear > misc/crypto: Add support for C3 > armv7/ltimer: Add support for local timer on armv7 cpus > imls: Add support to list images in NAND device > u-boot/spl: Add u-boot-spl.img to u-boot targets > arm/boards: Define a new config option CONFIG_BOOT_PARAMS_P > SPEAr: Remove extra spear board configurations > spear/configs: Split config files hierarchically into plat, arch, soc > and board > spear/include: Clean up the spear include files > spear/board: Cleanup spear related board files > spear: Append MISC_ as prefix to misc register bitmasks > spear: Read ethaddr from I2C memory > spear: Cleanup SoC area > spear/spl: Cleanup spear SPL > spear: Add POST memory support > spear: Enable ehci support > spear3xx: FIX: Enable access to memory for spear310 and spear320 > spear: Add cache support > spear3xx: Add pinmux support > spear320plc: Correct the MACB interface > spear/configs: Modify several configurations > spear320: Add support for SD/MMC > spear320-hmi: Add support for hmi machine > spear6xx/spear3xx: Add support to boot via NAND device > spear/spl: Add support to boot from Parallel NOR device > spear300evb: Add SPL support > spear1340: Add support for spear1340 SoC > spear1310: Add support for spear1310 SoC > spear1340evb: Add support for evb machine > spear1310evb: Add support for evb machine > spear1340lcad: Add support for LCAD machine > spear1340evb: Add SPL support > spear1310evb: Add SPL support > > MAINTAINERS | 4 + > Makefile | 10 + > README | 6 + > arch/arm/cpu/arm926ejs/spear/Makefile | 26 +- > arch/arm/cpu/arm926ejs/spear/cache.c | 32 + > arch/arm/cpu/arm926ejs/spear/cpu.c | 93 +- > arch/arm/cpu/arm926ejs/spear/emi.c | 80 ++ > arch/arm/cpu/arm926ejs/spear/reset.c | 2 +- > arch/arm/cpu/arm926ejs/spear/spear300.c | 140 +++ > arch/arm/cpu/arm926ejs/spear/spear310.c | 162 +++ > arch/arm/cpu/arm926ejs/spear/spear320.c | 860 ++++++++++++++++ > arch/arm/cpu/arm926ejs/spear/spear3xx.c | 130 +++ > arch/arm/cpu/arm926ejs/spear/spear600.c | 236 ----- > arch/arm/cpu/arm926ejs/spear/spear6xx.c | 43 + > arch/arm/cpu/arm926ejs/spear/spl-spear3xx.c | 171 ++++ > arch/arm/cpu/arm926ejs/spear/spl-spear600.c | 98 ++ > arch/arm/cpu/arm926ejs/spear/spl.c | 181 +--- > arch/arm/cpu/arm926ejs/spear/spl_boot.c | 206 +++- > arch/arm/cpu/arm926ejs/spear/spl_nand.c | 121 +++ > arch/arm/cpu/arm926ejs/spear/start.S | 58 +- > arch/arm/cpu/arm926ejs/spear/timer.c | 8 +- > arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 65 +- > arch/arm/cpu/armv7/Makefile | 17 +- > arch/arm/cpu/armv7/ca9_ltimer.c | 154 +++ > arch/arm/cpu/armv7/spear13xx/Makefile | 71 ++ > arch/arm/cpu/armv7/spear13xx/reset.c | 47 + > arch/arm/cpu/armv7/spear13xx/spear1310-pinmux.c | 860 ++++++++++++++++ > arch/arm/cpu/armv7/spear13xx/spear1310.c | 205 ++++ > arch/arm/cpu/armv7/spear13xx/spear1340-pinmux.c | 439 ++++++++ > arch/arm/cpu/armv7/spear13xx/spear1340.c | 270 +++++ > arch/arm/cpu/armv7/spear13xx/spear13xx.c | 62 ++ > arch/arm/cpu/armv7/spear13xx/spl-boot.c | 76 ++ > arch/arm/cpu/armv7/spear13xx/spl-lvl_gatetrn.c | 239 +++++ > arch/arm/cpu/armv7/spear13xx/spl-lvl_read.c | 229 +++++ > arch/arm/cpu/armv7/spear13xx/spl-lvl_write.c | 608 +++++++++++ > arch/arm/cpu/armv7/spear13xx/spl-spear1310.c | 230 +++++ > arch/arm/cpu/armv7/spear13xx/spl-spear1340.c | 210 ++++ > arch/arm/cpu/armv7/spear13xx/spl-spear13xx.c | 162 +++ > arch/arm/cpu/armv7/spear13xx/spl-swlvl.c | 93 ++ > arch/arm/cpu/armv7/spear13xx/start.S | 137 +++ > arch/arm/cpu/armv7/spear13xx/u-boot-spl.lds | 45 + > arch/arm/cpu/armv7/spear13xx/wakeup.S | 60 ++ > arch/arm/include/asm/arch-spear/bootrom_table.h | 54 + > arch/arm/include/asm/arch-spear/clk.h | 5 + > .../include/asm/arch-spear/{spr_emi.h => emi.h} | 8 +- > arch/arm/include/asm/arch-spear/generic.h | 123 +++ > .../include/asm/arch-spear/{spr_gpt.h => gpt.h} | 4 +- > arch/arm/include/asm/arch-spear/hardware.h | 78 +- > .../include/asm/arch-spear/{spr_misc.h => misc.h} | 208 ++-- > .../include/asm/arch-spear/{spr_ssp.h => mmc.h} | 26 +- > arch/arm/include/asm/arch-spear/pinmux.h | 133 +++ > arch/arm/include/asm/arch-spear/spear300.h | 83 ++ > arch/arm/include/asm/arch-spear/spear310.h | 75 ++ > arch/arm/include/asm/arch-spear/spear320.h | 490 +++++++++ > arch/arm/include/asm/arch-spear/spear3xx.h | 64 ++ > arch/arm/include/asm/arch-spear/spear600.h | 58 ++ > arch/arm/include/asm/arch-spear/spl_nand.h | 181 ++++ > arch/arm/include/asm/arch-spear/spl_pnor.h | 34 + > arch/arm/include/asm/arch-spear/spr_defs.h | 69 -- > .../asm/arch-spear/{spr_syscntl.h => syscntl.h} | 21 +- > arch/arm/include/asm/arch-spear13xx/boot.h | 106 ++ > arch/arm/include/asm/arch-spear13xx/c3.h | 63 ++ > arch/arm/include/asm/arch-spear13xx/generic.h | 41 + > arch/arm/include/asm/arch-spear13xx/gpio.h | 42 + > arch/arm/include/asm/arch-spear13xx/hardware.h | 33 + > arch/arm/include/asm/arch-spear13xx/misc.h | 34 + > arch/arm/include/asm/arch-spear13xx/mmc.h | 29 + > arch/arm/include/asm/arch-spear13xx/mpmc.h | 332 ++++++ > arch/arm/include/asm/arch-spear13xx/pinmux.h | 114 +++ > arch/arm/include/asm/arch-spear13xx/spear1310.h | 244 +++++ > .../include/asm/arch-spear13xx/spear1310_misc.h | 358 +++++++ > arch/arm/include/asm/arch-spear13xx/spear1340.h | 159 +++ > .../include/asm/arch-spear13xx/spear1340_misc.h | 357 +++++++ > arch/arm/include/asm/arch-spear13xx/spear13xx.h | 50 + > arch/arm/include/asm/ca9_ltimer.h | 40 + > arch/arm/lib/board.c | 12 + > board/spear/common/Makefile | 50 - > board/spear/spear310/Makefile | 45 - > board/{spear/spear600 => st/spear}/Makefile | 17 +- > board/st/spear/config.mk | 27 + > board/{spear/spear320 => st/spear/ddr}/Makefile | 23 +- > .../ddr/spear600_mt47h128m8_3_266_cl5_async.c | 3 +- > .../spear/ddr/spear600_mt47h32m16_333_cl5_psync.c | 8 +- > .../ddr/spear600_mt47h32m16_37e_166_cl4_sync.c | 3 +- > .../ddr/spear600_mt47h64m16_3_333_cl5_psync.c | 8 +- > board/st/spear/ddr/spr3xx_mt46h32m16_6_166_cl3.c | 140 +++ > .../spear/ddr/spr3xx_mt47h64m16_3_166_cl4_async.c | 146 +++ > .../spear/ddr/spr3xx_mt47h64m16_3_266_cl5_async.c | 146 +++ > .../spear/ddr/spr3xx_mt47h64m16_3_333_cl5_async.c | 152 +++ > .../spear320/spear320.c => st/spear/spear300evb.c} | 56 +- > .../spear310/spear310.c => st/spear/spear310evb.c} | 57 +- > .../spear300/spear300.c => st/spear/spear320hmi.c} | 66 +- > board/st/spear/spear320plc.c | 144 +++ > board/st/spear/spear600evb.c | 179 ++++ > .../common/spr_misc.c => st/spear/spear_common.c} | 175 +--- > .../spear/spear_lowlevel_init.S} | 14 - > board/{spear/x600 => st/spear}/x600.c | 0 > board/{spear/x600/fpga.c => st/spear/x600fpga.c} | 0 > board/{spear/x600/fpga.h => st/spear/x600fpga.h} | 0 > board/{spear/x600 => st/spear13xx}/Makefile | 16 +- > board/st/spear13xx/config.mk | 27 + > .../{spear/spear300 => st/spear13xx/ddr}/Makefile | 25 +- > board/st/spear13xx/ddr/h5tq2g63bfr_pbc_400_cl6.c | 238 +++++ > board/st/spear13xx/ddr/h5tq2g63bfr_pbc_533_cl8.c | 238 +++++ > board/st/spear13xx/ddr/k4b2g1646c_k0_400_cl6.c | 238 +++++ > board/st/spear13xx/ddr/k4b2g1646c_k0_533_cl8.c | 238 +++++ > .../ddr/mt41j128m16_15e_400_cl6_dqs_dq_term_en.c | 238 +++++ > .../ddr/mt41j256m8187e_400_cl6_dqs_dq_term_en.c | 246 +++++ > .../ddr/mt41j256m8187e_533_cl7_dqs_dq_term_en.c | 246 +++++ > .../ddr/mt41j64m16_15e_400_cl6_dqs_dq_term_en.c | 238 +++++ > .../ddr/mt41j64m16_15e_533_cl7_dqs_dq_term_en.c | 238 +++++ > .../spear13xx/ddr/mt47h128m16rt187e_400_cl6_ddr2.c | 239 +++++ > .../spear13xx/ddr/mt47h128m16rt187e_533_cl7_ddr2.c | 239 +++++ > board/st/spear13xx/spear1310evb.c | 93 ++ > board/st/spear13xx/spear1340evb.c | 94 ++ > .../spear600.c => st/spear13xx/spear1340lcad.c} | 60 +- > board/st/spear13xx/spear13xx_common.c | 53 + > board/st/spear13xx/spl-spear1310evb.c | 50 + > board/st/spear13xx/spl-spear1340evb.c | 57 ++ > boards.cfg | 45 +- > common/cmd_bootm.c | 98 ++ > common/usb_hub.c | 27 +- > drivers/misc/Makefile | 1 + > drivers/misc/c3.c | 122 +++ > drivers/mmc/Makefile | 1 + > drivers/mmc/spear_sdhci.c | 44 + > drivers/mtd/st_smi.c | 73 +- > drivers/net/designware.c | 4 +- > drivers/net/macb.c | 48 +- > drivers/serial/usbtty.c | 2 +- > drivers/serial/usbtty.h | 2 + > drivers/spi/Makefile | 1 + > drivers/spi/pl022_spi.c | 308 ++++++ > drivers/usb/gadget/Makefile | 1 + > drivers/usb/gadget/designware_otg.c | 1063 ++++++++++++++++++++ > drivers/usb/host/Makefile | 1 + > drivers/usb/host/ehci-spear.c | 70 ++ > include/configs/spear-common.h | 251 ----- > include/configs/spear.h | 242 +++++ > include/configs/spear1310-evb.h | 118 +++ > include/configs/spear1310.h | 35 + > include/configs/spear1340-evb.h | 124 +++ > include/configs/spear1340-lcad.h | 91 ++ > include/configs/spear1340.h | 30 + > include/configs/spear13xx.h | 121 +++ > include/configs/spear300-evb.h | 114 +++ > include/configs/{spear6xx_evb.h => spear300.h} | 45 +- > include/configs/spear310-evb.h | 145 +++ > include/configs/spear310.h | 76 ++ > include/configs/spear320-evb.h | 109 ++ > include/configs/spear320-hmi.h | 117 +++ > include/configs/spear320.h | 66 ++ > include/configs/spear3xx.h | 65 ++ > include/configs/spear3xx_evb.h | 173 ---- > include/configs/spear600-evb.h | 119 +++ > include/configs/spear600.h | 69 ++ > include/configs/x600.h | 2 +- > include/linux/bitops.h | 12 + > include/linux/mtd/st_smi.h | 1 - > include/usb/designware_otg.h | 500 +++++++++ > include/usbdevice.h | 4 +- > spl/Makefile | 11 + > 162 files changed, 18111 insertions(+), 1684 deletions(-) > create mode 100644 arch/arm/cpu/arm926ejs/spear/cache.c > create mode 100644 arch/arm/cpu/arm926ejs/spear/emi.c > create mode 100644 arch/arm/cpu/arm926ejs/spear/spear300.c > create mode 100644 arch/arm/cpu/arm926ejs/spear/spear310.c > create mode 100644 arch/arm/cpu/arm926ejs/spear/spear320.c > create mode 100644 arch/arm/cpu/arm926ejs/spear/spear3xx.c > delete mode 100644 arch/arm/cpu/arm926ejs/spear/spear600.c > create mode 100644 arch/arm/cpu/arm926ejs/spear/spear6xx.c > create mode 100644 arch/arm/cpu/arm926ejs/spear/spl-spear3xx.c > create mode 100644 arch/arm/cpu/arm926ejs/spear/spl-spear600.c > create mode 100644 arch/arm/cpu/arm926ejs/spear/spl_nand.c > create mode 100644 arch/arm/cpu/armv7/ca9_ltimer.c > create mode 100644 arch/arm/cpu/armv7/spear13xx/Makefile > create mode 100644 arch/arm/cpu/armv7/spear13xx/reset.c > create mode 100644 arch/arm/cpu/armv7/spear13xx/spear1310-pinmux.c > create mode 100644 arch/arm/cpu/armv7/spear13xx/spear1310.c > create mode 100644 arch/arm/cpu/armv7/spear13xx/spear1340-pinmux.c > create mode 100644 arch/arm/cpu/armv7/spear13xx/spear1340.c > create mode 100644 arch/arm/cpu/armv7/spear13xx/spear13xx.c > create mode 100644 arch/arm/cpu/armv7/spear13xx/spl-boot.c > create mode 100644 arch/arm/cpu/armv7/spear13xx/spl-lvl_gatetrn.c > create mode 100644 arch/arm/cpu/armv7/spear13xx/spl-lvl_read.c > create mode 100644 arch/arm/cpu/armv7/spear13xx/spl-lvl_write.c > create mode 100644 arch/arm/cpu/armv7/spear13xx/spl-spear1310.c > create mode 100644 arch/arm/cpu/armv7/spear13xx/spl-spear1340.c > create mode 100644 arch/arm/cpu/armv7/spear13xx/spl-spear13xx.c > create mode 100644 arch/arm/cpu/armv7/spear13xx/spl-swlvl.c > create mode 100644 arch/arm/cpu/armv7/spear13xx/start.S > create mode 100644 arch/arm/cpu/armv7/spear13xx/u-boot-spl.lds > create mode 100644 arch/arm/cpu/armv7/spear13xx/wakeup.S > create mode 100644 arch/arm/include/asm/arch-spear/bootrom_table.h > rename arch/arm/include/asm/arch-spear/{spr_emi.h => emi.h} (94%) > create mode 100644 arch/arm/include/asm/arch-spear/generic.h > rename arch/arm/include/asm/arch-spear/{spr_gpt.h => gpt.h} (97%) > rename arch/arm/include/asm/arch-spear/{spr_misc.h => misc.h} (52%) > rename arch/arm/include/asm/arch-spear/{spr_ssp.h => mmc.h} (69%) > create mode 100644 arch/arm/include/asm/arch-spear/pinmux.h > create mode 100644 arch/arm/include/asm/arch-spear/spear300.h > create mode 100644 arch/arm/include/asm/arch-spear/spear310.h > create mode 100644 arch/arm/include/asm/arch-spear/spear320.h > create mode 100644 arch/arm/include/asm/arch-spear/spear3xx.h > create mode 100644 arch/arm/include/asm/arch-spear/spear600.h > create mode 100644 arch/arm/include/asm/arch-spear/spl_nand.h > create mode 100644 arch/arm/include/asm/arch-spear/spl_pnor.h > delete mode 100644 arch/arm/include/asm/arch-spear/spr_defs.h > rename arch/arm/include/asm/arch-spear/{spr_syscntl.h => syscntl.h} (71%) > create mode 100644 arch/arm/include/asm/arch-spear13xx/boot.h > create mode 100644 arch/arm/include/asm/arch-spear13xx/c3.h > create mode 100644 arch/arm/include/asm/arch-spear13xx/generic.h > create mode 100644 arch/arm/include/asm/arch-spear13xx/gpio.h > create mode 100644 arch/arm/include/asm/arch-spear13xx/hardware.h > create mode 100644 arch/arm/include/asm/arch-spear13xx/misc.h > create mode 100644 arch/arm/include/asm/arch-spear13xx/mmc.h > create mode 100644 arch/arm/include/asm/arch-spear13xx/mpmc.h > create mode 100644 arch/arm/include/asm/arch-spear13xx/pinmux.h > create mode 100644 arch/arm/include/asm/arch-spear13xx/spear1310.h > create mode 100644 arch/arm/include/asm/arch-spear13xx/spear1310_misc.h > create mode 100644 arch/arm/include/asm/arch-spear13xx/spear1340.h > create mode 100644 arch/arm/include/asm/arch-spear13xx/spear1340_misc.h > create mode 100644 arch/arm/include/asm/arch-spear13xx/spear13xx.h > create mode 100644 arch/arm/include/asm/ca9_ltimer.h > delete mode 100644 board/spear/common/Makefile > delete mode 100644 board/spear/spear310/Makefile > rename board/{spear/spear600 => st/spear}/Makefile (74%) > create mode 100644 board/st/spear/config.mk > rename board/{spear/spear320 => st/spear/ddr}/Makefile (63%) > rename arch/arm/cpu/arm926ejs/spear/spr600_mt47h128m8_3_266_cl5_async.c => board/st/spear/ddr/spear600_mt47h128m8_3_266_cl5_async.c (95%) > rename arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_333_cl5_psync.c => board/st/spear/ddr/spear600_mt47h32m16_333_cl5_psync.c (91%) > rename arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_37e_166_cl4_sync.c => board/st/spear/ddr/spear600_mt47h32m16_37e_166_cl4_sync.c (95%) > rename arch/arm/cpu/arm926ejs/spear/spr600_mt47h64m16_3_333_cl5_psync.c => board/st/spear/ddr/spear600_mt47h64m16_3_333_cl5_psync.c (91%) > create mode 100644 board/st/spear/ddr/spr3xx_mt46h32m16_6_166_cl3.c > create mode 100644 board/st/spear/ddr/spr3xx_mt47h64m16_3_166_cl4_async.c > create mode 100644 board/st/spear/ddr/spr3xx_mt47h64m16_3_266_cl5_async.c > create mode 100644 board/st/spear/ddr/spr3xx_mt47h64m16_3_333_cl5_async.c > rename board/{spear/spear320/spear320.c => st/spear/spear300evb.c} (69%) > rename board/{spear/spear310/spear310.c => st/spear/spear310evb.c} (68%) > rename board/{spear/spear300/spear300.c => st/spear/spear320hmi.c} (58%) > create mode 100644 board/st/spear/spear320plc.c > create mode 100644 board/st/spear/spear600evb.c > rename board/{spear/common/spr_misc.c => st/spear/spear_common.c} (52%) > rename board/{spear/common/spr_lowlevel_init.S => st/spear/spear_lowlevel_init.S} (88%) > rename board/{spear/x600 => st/spear}/x600.c (100%) > rename board/{spear/x600/fpga.c => st/spear/x600fpga.c} (100%) > rename board/{spear/x600/fpga.h => st/spear/x600fpga.h} (100%) > rename board/{spear/x600 => st/spear13xx}/Makefile (76%) > create mode 100644 board/st/spear13xx/config.mk > rename board/{spear/spear300 => st/spear13xx/ddr}/Makefile (57%) > create mode 100644 board/st/spear13xx/ddr/h5tq2g63bfr_pbc_400_cl6.c > create mode 100644 board/st/spear13xx/ddr/h5tq2g63bfr_pbc_533_cl8.c > create mode 100644 board/st/spear13xx/ddr/k4b2g1646c_k0_400_cl6.c > create mode 100644 board/st/spear13xx/ddr/k4b2g1646c_k0_533_cl8.c > create mode 100644 board/st/spear13xx/ddr/mt41j128m16_15e_400_cl6_dqs_dq_term_en.c > create mode 100644 board/st/spear13xx/ddr/mt41j256m8187e_400_cl6_dqs_dq_term_en.c > create mode 100644 board/st/spear13xx/ddr/mt41j256m8187e_533_cl7_dqs_dq_term_en.c > create mode 100644 board/st/spear13xx/ddr/mt41j64m16_15e_400_cl6_dqs_dq_term_en.c > create mode 100644 board/st/spear13xx/ddr/mt41j64m16_15e_533_cl7_dqs_dq_term_en.c > create mode 100644 board/st/spear13xx/ddr/mt47h128m16rt187e_400_cl6_ddr2.c > create mode 100644 board/st/spear13xx/ddr/mt47h128m16rt187e_533_cl7_ddr2.c > create mode 100644 board/st/spear13xx/spear1310evb.c > create mode 100644 board/st/spear13xx/spear1340evb.c > rename board/{spear/spear600/spear600.c => st/spear13xx/spear1340lcad.c} (60%) > create mode 100644 board/st/spear13xx/spear13xx_common.c > create mode 100644 board/st/spear13xx/spl-spear1310evb.c > create mode 100644 board/st/spear13xx/spl-spear1340evb.c > create mode 100644 drivers/misc/c3.c > create mode 100644 drivers/mmc/spear_sdhci.c > create mode 100644 drivers/spi/pl022_spi.c > create mode 100644 drivers/usb/gadget/designware_otg.c > create mode 100644 drivers/usb/host/ehci-spear.c > delete mode 100644 include/configs/spear-common.h > create mode 100644 include/configs/spear.h > create mode 100644 include/configs/spear1310-evb.h > create mode 100644 include/configs/spear1310.h > create mode 100644 include/configs/spear1340-evb.h > create mode 100644 include/configs/spear1340-lcad.h > create mode 100644 include/configs/spear1340.h > create mode 100644 include/configs/spear13xx.h > create mode 100644 include/configs/spear300-evb.h > rename include/configs/{spear6xx_evb.h => spear300.h} (54%) > create mode 100644 include/configs/spear310-evb.h > create mode 100644 include/configs/spear310.h > create mode 100644 include/configs/spear320-evb.h > create mode 100644 include/configs/spear320-hmi.h > create mode 100644 include/configs/spear320.h > create mode 100644 include/configs/spear3xx.h > delete mode 100644 include/configs/spear3xx_evb.h > create mode 100644 include/configs/spear600-evb.h > create mode 100644 include/configs/spear600.h > create mode 100644 include/usb/designware_otg.h >

1 0

[U-Boot] [PATCH] twl4030: fix 'could could' in error messages
by Peter Meerwald 20 Nov '12

20 Nov '12

From: Peter Meerwald <p.meerwald(a)bct-electronic.com> Signed-off-by: Peter Meerwald <p.meerwald(a)bct-electronic.com> --- drivers/power/twl4030.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c index 36b2144..e7d5f13 100644 --- a/drivers/power/twl4030.c +++ b/drivers/power/twl4030.c @@ -71,7 +71,7 @@ void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val, ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_val, vsel_reg); if (ret != 0) { - printf("Could could not write vsel to reg %02x (%d)\n", + printf("Could not write vsel to reg %02x (%d)\n", vsel_reg, ret); return; } @@ -80,7 +80,7 @@ void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val, ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp_sel, dev_grp); if (ret != 0) - printf("Could could not write grp_sel to reg %02x (%d)\n", + printf("Could not write grp_sel to reg %02x (%d)\n", dev_grp, ret); } -- 1.7.9.5

1 0

[U-Boot] [PATCH] board/freescale/common/cds_pci_ft.c: Fix rotate wrong cells in interrupt-map property
by Jiang Bin 20 Nov '12

20 Nov '12

For linux 3.x, the size of each item in interrupt-map property is 9 not 7. Don't use the static value and calculate the size with following cells: PCI #address-cells, PCI #interrupt-cells, PIC address, PIC #address-cells, PIC #interrupt-cells. Signed-off-by: Bin Jiang <bin.jiang(a)windriver.com> --- board/freescale/common/cds_pci_ft.c | 26 +++++++++++++++++++++++--- 1 files changed, 23 insertions(+), 3 deletions(-) diff --git a/board/freescale/common/cds_pci_ft.c b/board/freescale/common/cds_pci_ft.c index 8a09f99..32233db 100644 --- a/board/freescale/common/cds_pci_ft.c +++ b/board/freescale/common/cds_pci_ft.c @@ -31,7 +31,8 @@ static void cds_pci_fixup(void *blob) int node; const char *path; int len, slot, i; - u32 *map = NULL; + u32 *map = NULL, *piccells = NULL; + int off, cells; node = fdt_path_offset(blob, "/aliases"); if (node >= 0) { @@ -41,6 +42,25 @@ static void cds_pci_fixup(void *blob) if (node >= 0) { map = fdt_getprop_w(blob, node, "interrupt-map", &len); } + /* Each item in "interrupt-map" property is translated with + * following cells: + * PCI #address-cells, PCI #interrupt-cells, + * PIC address, PIC #address-cells, PIC #interrupt-cells. + */ + cells = fdt_getprop_u32_default(blob, path, "#address-cells", 1); + cells += fdt_getprop_u32_default(blob, path, "#interrupt-cells", 1); + off = fdt_node_offset_by_phandle(blob, fdt32_to_cpu(*(map+cells))); + if (off <= 0) + return; + cells += 1; + piccells = (u32 *)fdt_getprop(blob, off, "#address-cells", NULL); + if (piccells == NULL) + return; + cells += *piccells; + piccells = (u32 *)fdt_getprop(blob, off, "#interrupt-cells", NULL); + if (piccells == NULL) + return; + cells += *piccells; } } @@ -49,12 +69,12 @@ static void cds_pci_fixup(void *blob) slot = get_pci_slot(); - for (i=0;i<len;i+=7) { + for (i=0;i<len;i+=cells) { /* We rotate the interrupt pins so that the mapping * changes depending on the slot the carrier card is in. */ map[3] = ((map[3] + slot - 2) % 4) + 1; - map+=7; + map+=cells; } } } -- 1.6.3.1

1 0

[U-Boot] pull request for u-boot-tegra/master into ARM/master
by Tom Warren 20 Nov '12

20 Nov '12

Albert, Please pull u-boot-tegra/master into ARM/master. Thanks! ./MAKEALL -a arm completes w/o any new errors. checkpatch is clean, also. The following changes since commit 7a5337732e3e05b2b0de1b592fa031b2c7b4f632: Rajeshwari Shinde (1): EXYNOS5: Enable SPI booting. are available in the git repository at: git://git.denx.de/u-boot-tegra master Allen Martin (1): tegra: add CONSOLE_MUX support to tegra-kbc Mayuresh Kulkarni (1): tegra: Enable display/lcd support on Seaboard Simon Glass (16): tegra: Use const for pinmux_config_pingroup/table() tegra: Add display support to funcmux tegra: fdt: Add pwm binding and node tegra: fdt: Add LCD definitions for Tegra tegra: Add support for PWM tegra: Add LCD driver tegra: Add LCD support to Nvidia boards arm: Add control over cachability of memory regions lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment lcd: Add support for flushing LCD fb from dcache after update tegra: Align LCD frame buffer to section boundary tegra: Support control of cache settings for LCD tegra: fdt: Add LCD definitions for Seaboard lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console tegra: Remove unnecessary CONFIG_SYS_NAND_BASE tegra: config: seaboard: Move tegra-common-post to correct place Stephen Warren (4): ARM: tegra: TrimSlice: add support for USB1 port mmc: tegra: support 4-bit operation too on 8-bit slots ARM: tegra: enable 8-bit SD slots in board files tegra: use generic fs commands in BOOTCOMMAND Wei Ni (1): tegra: Add SOC support for display/lcd README | 16 + arch/arm/cpu/armv7/cache_v7.c | 11 + arch/arm/cpu/armv7/tegra20/Makefile | 2 + arch/arm/cpu/armv7/tegra20/display.c | 409 ++++++++++++++++++ arch/arm/cpu/armv7/tegra20/pwm.c | 101 +++++ arch/arm/cpu/tegra20-common/funcmux.c | 37 ++ arch/arm/cpu/tegra20-common/pinmux.c | 4 +- arch/arm/dts/tegra20.dtsi | 105 +++++ arch/arm/include/asm/arch-tegra20/dc.h | 545 ++++++++++++++++++++++++ arch/arm/include/asm/arch-tegra20/display.h | 152 +++++++ arch/arm/include/asm/arch-tegra20/pinmux.h | 4 +- arch/arm/include/asm/arch-tegra20/pwm.h | 75 ++++ arch/arm/include/asm/system.h | 31 ++ arch/arm/lib/cache-cp15.c | 51 ++- board/compal/paz00/paz00.c | 5 +- board/compulab/dts/tegra20-trimslice.dts | 3 +- board/compulab/trimslice/trimslice.c | 8 + board/nvidia/common/board.c | 24 + board/nvidia/dts/tegra20-seaboard.dts | 33 ++ board/nvidia/harmony/harmony.c | 5 +- board/nvidia/seaboard/seaboard.c | 5 +- common/lcd.c | 89 ++++- common/main.c | 12 +- doc/device-tree-bindings/pwm/tegra20-pwm.txt | 18 + doc/device-tree-bindings/video/displaymode.txt | 42 ++ doc/device-tree-bindings/video/tegra20-dc.txt | 85 ++++ drivers/input/tegra-kbc.c | 18 +- drivers/mmc/tegra_mmc.c | 7 +- drivers/video/Makefile | 1 + drivers/video/tegra.c | 379 ++++++++++++++++ include/configs/harmony.h | 4 +- include/configs/paz00.h | 3 + include/configs/seaboard.h | 20 +- include/configs/tec.h | 1 - include/configs/tegra-common-post.h | 39 +- include/configs/tegra20-common.h | 3 + include/configs/trimslice.h | 4 + include/configs/ventana.h | 3 + include/configs/whistler.h | 3 + include/fdtdec.h | 2 + include/lcd.h | 11 + lib/fdtdec.c | 2 + 42 files changed, 2294 insertions(+), 78 deletions(-) create mode 100644 arch/arm/cpu/armv7/tegra20/display.c create mode 100644 arch/arm/cpu/armv7/tegra20/pwm.c create mode 100644 arch/arm/include/asm/arch-tegra20/dc.h create mode 100644 arch/arm/include/asm/arch-tegra20/display.h create mode 100644 arch/arm/include/asm/arch-tegra20/pwm.h create mode 100644 doc/device-tree-bindings/pwm/tegra20-pwm.txt create mode 100644 doc/device-tree-bindings/video/displaymode.txt create mode 100644 doc/device-tree-bindings/video/tegra20-dc.txt create mode 100644 drivers/video/tegra.c

2 8

[U-Boot] [PATCH 0/6 V2] EXYNOS5: FDT Support for I2C
by Rajeshwari Shinde 20 Nov '12

20 Nov '12

This patch set adds FDT support for I2C driver and API's to acess the bus number using the fdt node and also reset the port. Changes in V2: - Baord i2c init moved to I2C driver in case of FDT. - Added Periph id to device node. - Modified i2c_get_bus_num_fdt api to compare using node. Rajeshwari Shinde (6): EXYNOS5: FDT: Add I2C device node data EXYNOS5 : FDT: Add Aliases for I2C device EXYNOS5: FDT: Add compatible string for I2C FDT: Api to find compatible id for a given node I2C: Driver changes for FDT support SMDK5250: Initialise I2C using FDT arch/arm/dts/exynos-periph-id.dtsi | 35 +++++++++++ arch/arm/dts/exynos5250.dtsi | 73 +++++++++++++++++++++++ board/samsung/dts/exynos5250-smdk5250.dts | 11 ++++ board/samsung/smdk5250/smdk5250.c | 20 +------ drivers/i2c/s3c24x0_i2c.c | 90 ++++++++++++++++++++++++++++- drivers/i2c/s3c24x0_i2c.h | 8 +++ include/fdtdec.h | 15 +++++ include/i2c.h | 26 ++++++++ lib/fdtdec.c | 13 ++++ 9 files changed, 271 insertions(+), 20 deletions(-) create mode 100644 arch/arm/dts/exynos-periph-id.dtsi -- 1.7.4.4

5 22

[U-Boot] [PATCH 1/3] nand: Clean up nand_util
by Benoît Thébaudeau 19 Nov '12

19 Nov '12

This patch cleans up nand_util.c: - Fix tabs. - Fix typos. - Remove space character before opening parenthesis in function calls. - Fix comments. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau(a)advansee.com> Cc: Scott Wood <scottwood(a)freescale.com> --- .../drivers/mtd/nand/nand_util.c | 64 ++++++++++---------- 1 file changed, 32 insertions(+), 32 deletions(-) diff --git u-boot-nand-flash-9c60e75.orig/drivers/mtd/nand/nand_util.c u-boot-nand-flash-9c60e75/drivers/mtd/nand/nand_util.c index c4752a7..3f11103 100644 --- u-boot-nand-flash-9c60e75.orig/drivers/mtd/nand/nand_util.c +++ u-boot-nand-flash-9c60e75/drivers/mtd/nand/nand_util.c @@ -50,8 +50,8 @@ #include <nand.h> #include <jffs2/jffs2.h> -typedef struct erase_info erase_info_t; -typedef struct mtd_info mtd_info_t; +typedef struct erase_info erase_info_t; +typedef struct mtd_info mtd_info_t; /* support only for native endian JFFS2 */ #define cpu_to_je16(x) (x) @@ -59,7 +59,7 @@ typedef struct mtd_info mtd_info_t; /** * nand_erase_opts: - erase NAND flash with support for various options - * (jffs2 formating) + * (jffs2 formatting) * * @param meminfo NAND device to erase * @param opts options, @see struct nand_erase_options @@ -81,7 +81,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts) struct nand_chip *chip = meminfo->priv; if ((opts->offset & (meminfo->writesize - 1)) != 0) { - printf("Attempt to erase non page aligned data\n"); + printf("Attempt to erase non page-aligned data\n"); return -1; } @@ -94,8 +94,8 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts) erase_length = lldiv(opts->length + meminfo->erasesize - 1, meminfo->erasesize); - cleanmarker.magic = cpu_to_je16 (JFFS2_MAGIC_BITMASK); - cleanmarker.nodetype = cpu_to_je16 (JFFS2_NODETYPE_CLEANMARKER); + cleanmarker.magic = cpu_to_je16(JFFS2_MAGIC_BITMASK); + cleanmarker.nodetype = cpu_to_je16(JFFS2_NODETYPE_CLEANMARKER); cleanmarker.totlen = cpu_to_je32(8); /* scrub option allows to erase badblock. To prevent internal @@ -118,7 +118,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts) erased_length < erase_length; erase.addr += meminfo->erasesize) { - WATCHDOG_RESET (); + WATCHDOG_RESET(); if (!opts->scrub && bbtest) { int ret = meminfo->block_isbad(meminfo, erase.addr); @@ -259,7 +259,7 @@ int nand_lock(struct mtd_info *mtd, int tight) * flash * * @param mtd nand mtd instance - * @param offset page address to query (muss be page aligned!) + * @param offset page address to query (must be page-aligned!) * * @return -1 in case of error * >0 lock status: @@ -281,7 +281,7 @@ int nand_get_lock_status(struct mtd_info *mtd, loff_t offset) if ((offset & (mtd->writesize - 1)) != 0) { - printf ("nand_get_lock_status: " + printf("nand_get_lock_status: " "Start address must be beginning of " "nand page!\n"); ret = -1; @@ -332,20 +332,20 @@ int nand_unlock(struct mtd_info *mtd, loff_t start, size_t length, /* check the WP bit */ chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); if (!(chip->read_byte(mtd) & NAND_STATUS_WP)) { - printf ("nand_unlock: Device is write protected!\n"); + printf("nand_unlock: Device is write protected!\n"); ret = -1; goto out; } if ((start & (mtd->erasesize - 1)) != 0) { - printf ("nand_unlock: Start address must be beginning of " + printf("nand_unlock: Start address must be beginning of " "nand block!\n"); ret = -1; goto out; } if (length == 0 || (length & (mtd->erasesize - 1)) != 0) { - printf ("nand_unlock: Length must be a multiple of nand block " + printf("nand_unlock: Length must be a multiple of nand block " "size %08x!\n", mtd->erasesize); ret = -1; goto out; @@ -485,7 +485,7 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, pages = nand->erasesize / nand->writesize; blocksize = (pages * nand->oobsize) + nand->erasesize; if (*length % (nand->writesize + nand->oobsize)) { - printf ("Attempt to write incomplete page" + printf("Attempt to write incomplete page" " in yaffs mode\n"); return -EINVAL; } @@ -507,25 +507,25 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, * partition boundary). So don't try to handle that. */ if ((offset & (nand->writesize - 1)) != 0) { - printf ("Attempt to write non page aligned data\n"); + printf("Attempt to write non page-aligned data\n"); *length = 0; return -EINVAL; } need_skip = check_skip_len(nand, offset, *length); if (need_skip < 0) { - printf ("Attempt to write outside the flash area\n"); + printf("Attempt to write outside the flash area\n"); *length = 0; return -EINVAL; } if (!need_skip && !(flags & WITH_DROP_FFS)) { - rval = nand_write (nand, offset, length, buffer); + rval = nand_write(nand, offset, length, buffer); if (rval == 0) return 0; *length = 0; - printf ("NAND write to offset %llx failed %d\n", + printf("NAND write to offset %llx failed %d\n", offset, rval); return rval; } @@ -534,10 +534,10 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, size_t block_offset = offset & (nand->erasesize - 1); size_t write_size, truncated_write_size; - WATCHDOG_RESET (); + WATCHDOG_RESET(); - if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) { - printf ("Skip bad block 0x%08llx\n", + if (nand_block_isbad(nand, offset & ~(nand->erasesize - 1))) { + printf("Skip bad block 0x%08llx\n", offset & ~(nand->erasesize - 1)); offset += nand->erasesize - block_offset; continue; @@ -592,7 +592,7 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, } if (rval != 0) { - printf ("NAND write to offset %llx failed %d\n", + printf("NAND write to offset %llx failed %d\n", offset, rval); *length -= left_to_write; return rval; @@ -608,13 +608,13 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, * nand_read_skip_bad: * * Read image from NAND flash. - * Blocks that are marked bad are skipped and the next block is readen + * Blocks that are marked bad are skipped and the next block is read * instead as long as the image is short enough to fit even after skipping the * bad blocks. * * @param nand NAND device * @param offset offset in flash - * @param length buffer length, on return holds remaining bytes to read + * @param length buffer length, on return holds number of read bytes * @param buffer buffer to write to * @return 0 in case of success */ @@ -627,25 +627,25 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, int need_skip; if ((offset & (nand->writesize - 1)) != 0) { - printf ("Attempt to read non page aligned data\n"); + printf("Attempt to read non page-aligned data\n"); *length = 0; return -EINVAL; } need_skip = check_skip_len(nand, offset, *length); if (need_skip < 0) { - printf ("Attempt to read outside the flash area\n"); + printf("Attempt to read outside the flash area\n"); *length = 0; return -EINVAL; } if (!need_skip) { - rval = nand_read (nand, offset, length, buffer); + rval = nand_read(nand, offset, length, buffer); if (!rval || rval == -EUCLEAN) return 0; *length = 0; - printf ("NAND read from offset %llx failed %d\n", + printf("NAND read from offset %llx failed %d\n", offset, rval); return rval; } @@ -654,10 +654,10 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, size_t block_offset = offset & (nand->erasesize - 1); size_t read_length; - WATCHDOG_RESET (); + WATCHDOG_RESET(); - if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) { - printf ("Skipping bad block 0x%08llx\n", + if (nand_block_isbad(nand, offset & ~(nand->erasesize - 1))) { + printf("Skipping bad block 0x%08llx\n", offset & ~(nand->erasesize - 1)); offset += nand->erasesize - block_offset; continue; @@ -668,9 +668,9 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, else read_length = nand->erasesize - block_offset; - rval = nand_read (nand, offset, &read_length, p_buffer); + rval = nand_read(nand, offset, &read_length, p_buffer); if (rval && rval != -EUCLEAN) { - printf ("NAND read from offset %llx failed %d\n", + printf("NAND read from offset %llx failed %d\n", offset, rval); *length -= left_to_read; return rval;

4 12

[U-Boot] Moschip ethernet adapter is not seen as ethernet device
by valdez valdez 19 Nov '12

19 Nov '12

Hello, I tried use my USB ETH adapter. Following README files I addes into beagle.h file (my board is beagleboard) this: #define CONFIG_USB_HOST_ETHER /* Enable USB Ethernet adapters */ #define CONFIG_USB_ETHER_ASIX /* Asix, or whatever driver(s) you want */ #define CONFIG_CMD_NET #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME #define CONFIG_BOOTP_BOOTPATH and into asix.c file this: { 0x9710, 0x7830, FLAG_TYPE_AX88172}, I based on what my host Linux showed to me: Vendor specific, USB Revision 2.0 - Moschip Semiconductor UA0025C 6e003e8f - Class: Vendor specific - PacketSize: 64 Configurations: 1 - Vendor: 0x9710 Product 0x7830 Version 1.0 Configuration: 1 - Interfaces: 1 Bus Powered Remote Wakeup 500mA Interface: 0 - Alternate Setting 0, Endpoints: 3 - Class Vendor specific - Endpoint 1 In Bulk MaxPacket 512 - Endpoint 2 Out Bulk MaxPacket 512 - Endpoint 3 In Interrupt MaxPacket 16 Interval 1ms But U-Boot don't see it as Ethernet Device, it only recognize it in tree: (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found OMAP3 beagleboard.org # usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Vendor specific (480 Mb/s, 500mA) Moschip Semiconductor UA0025C 6e003e8f Could you help me with this, please?

1 1

[U-Boot] Pull request: u-boot-video/master
by Anatolij Gustschin 19 Nov '12

19 Nov '12

Hello Tom, The following changes since commit 1cc619be8b73abbee2fd6faf2cd4ade27b516531: Merge branch 'master' of git://git.denx.de/u-boot-avr32 (2012-11-05 09:46:45 -0700) are available in the git repository at: git://git.denx.de/u-boot-video.git master Bo Shen (1): video: atmel: implement lcd_setcolreg function Jens Scharsig (BuS Elektronik) (1): Video: fix compiler warnings in bus_vcxk Liu Ying (1): ipu common: reset ipuv3 correctly Stefan Reinauer (2): video: Provide an API to access video parameters video: Implement additional video API functions in cfb_console Tom Wai-Hong Tam (2): lcd: Fix BMP decode bug that skips the wrong padded row lcd: Implement RLE8 bitmap decoding Vadim Bendebury (2): lcd: Provide an API to access LCD parameters video: Skip bitmaps which do not fit into the screen in cfb_console Vikram Narayanan (2): mx51evk: Fix build error when CONFIG_VIDEO is disabled mx53loco: Fix build error when CONFIG_VIDEO is disabled README | 5 + arch/arm/include/asm/imx-common/mx5_video.h | 21 +++ board/freescale/mx51evk/Makefile | 4 +- board/freescale/mx51evk/mx51evk.c | 57 +-------- board/freescale/mx51evk/mx51evk_video.c | 81 ++++++++++++ board/freescale/mx53loco/Makefile | 4 +- board/freescale/mx53loco/mx53loco.c | 66 +---------- board/freescale/mx53loco/mx53loco_video.c | 94 ++++++++++++++ common/cmd_bmp.c | 5 +- common/lcd.c | 178 ++++++++++++++++++++++++++- drivers/video/atmel_hlcdfb.c | 12 ++ drivers/video/bus_vcxk.c | 2 +- drivers/video/cfb_console.c | 49 ++++++++ drivers/video/ipu_common.c | 10 ++ include/atmel_hlcdc.h | 7 + include/lcd.h | 36 ++++++ include/video.h | 48 +++++++ 17 files changed, 550 insertions(+), 129 deletions(-) create mode 100644 arch/arm/include/asm/imx-common/mx5_video.h create mode 100644 board/freescale/mx51evk/mx51evk_video.c create mode 100644 board/freescale/mx53loco/mx53loco_video.c Please pull. Thanks! Anatolij

2 1