January 2012 - U-Boot

[U-Boot] LL TEMAC V8 refactored
by Stephan Linz 17 Jan '12

17 Jan '12

Back to the discussion from the last three months I have refactored the LL TEMAC driver again. The version V8 is ready to next review and testing. I myself have tested it successfully on an ML605 (TEMAC hard core) and on a SP3ADSP1800 (TEMAC soft core). Thanks to Marek, Wolfgang, Andy and Michal to review V4..7. Special thanks to Ricardo. He has tested the driver on a Xilinx Virtex5 FX (PPC440) platform. To use the driver on Microblaze, you will need all additional platform patches by Michal Simek and me. All related patches are bundled on patchwork: - http://patchwork.ozlabs.org/bundle/rexut/net-ll_temac/ @Michal: Please merge the patches into the custodian git tree for final testing. @Ricardo: Please test the new V8 patch on your PPC440 platform again and post the patches for xilinx/ppc440-generic if you want. -- Best regards, Stephan Linz ______________________________________________________________________________ MB-Ref: http://www.li-pro.de/xilinx_mb:mbref:start OpenDCC: http://www.li-pro.net/opendcc.phtml PC/M: http://www.li-pro.net/pcm.phtml Sourceforge: http://sourceforge.net/users/slz Gitorious: https://gitorious.org/~slz

3 17

[U-Boot] [PATCH v2 0/2] fdt: Deal correctly with alias nodes
by Simon Glass 17 Jan '12

17 Jan '12

This series proposes a new way to deal with alias nodes and introduces a function to take care of it. Drivers can now request an ordered list of compatible nodes in a single step. This simplifies node discovery for drivers (and keeps this nasty code in a common place). If DEBUG is defined the alias function will print messages in the event of a warning/error. Changes in v2: - Rename function to fdtdec_find_aliases_for_id() - Improve alias checking algorithm to reduce run time - Skip nodes marked as disabled - Allow gaps in the list returned to the caller - Add test_fdtdec command to test fdtdec_find_aliases_for_id() Simon Glass (2): fdt: Add fdtdec_find_aliases() to deal with alias nodes fdt: Add tests for fdtdec include/fdtdec.h | 47 +++++++++++ lib/Makefile | 1 + lib/fdtdec-test.c | 228 +++++++++++++++++++++++++++++++++++++++++++++++++++++ lib/fdtdec.c | 114 ++++++++++++++++++++++++++ 4 files changed, 390 insertions(+), 0 deletions(-) create mode 100644 lib/fdtdec-test.c -- 1.7.3.1

2 6

[U-Boot] [PATCH v2 0/9] Unified command execution in one place
by Simon Glass 17 Jan '12

17 Jan '12

At present two parsers have similar code to execute commands. Also cmd_usage() is called all over the place. This series adds a single function which processes commands called cmd_process(). This new function understands return codes, and in particular CMD_RET_USAGE to indicate a usage error. So rather than calling cmd_usage() themselves, the command handlers can just return this error. There appears to be a run_command2() which is used to run commands with the selected parser. This series changes this in two separate steps to just run_command(), and renames the old run_command() to builtin_run_command(). No one should call this outside main.c since if the hush parser is being used it is wrong to call it. The built-in parser code could move into a separate file perhaps in a future patch. The overall series reduces code size on ARM by about 1KB on my ~160KB U-Boot text region when the hush parser is used, and around 60 bytes when it isn't. As an aside the only user of parse_line() is fsl_ddr_interactive() which seems to have its own command line interface which operates before DRAM is set up. Do I have this right? Is there no way this could be done later from a normal U-Boot command? (I have run this through MAKEALL and it seems clean) Changes in v2: - Fix minor errors one of which created a warning - Squash i2c patch into the common/ patch Simon Glass (9): Remove CMD_PXE's static on run_command() Rename run_command() to builtin_run_command() Rename run_command2() to run_command() Stop using builtin_run_command() Don't include standard parser if hush is used Create a single cmd_call() function to handle command execution Remove interleave of non-U-Boot code in hush Add cmd_process() to process commands in one place Convert cmd_usage() calls in common to use a return value arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 7 +-- board/esd/common/cmd_loadpci.c | 2 +- board/esd/du440/du440.c | 2 +- common/cmd_bedbug.c | 6 +- common/cmd_bmp.c | 6 +- common/cmd_boot.c | 2 +- common/cmd_bootm.c | 10 +--- common/cmd_cache.c | 4 +- common/cmd_dataflash_mmc_mux.c | 2 +- common/cmd_date.c | 3 +- common/cmd_dcr.c | 8 +- common/cmd_df.c | 2 +- common/cmd_eeprom.c | 2 +- common/cmd_ext2.c | 4 +- common/cmd_fdc.c | 2 +- common/cmd_fdos.c | 2 +- common/cmd_fdt.c | 14 ++-- common/cmd_fitupd.c | 2 +- common/cmd_flash.c | 14 ++-- common/cmd_fpga.c | 4 +- common/cmd_gpio.c | 2 +- common/cmd_i2c.c | 32 +++++----- common/cmd_ide.c | 10 ++-- common/cmd_irq.c | 2 +- common/cmd_itest.c | 2 +- common/cmd_led.c | 6 +- common/cmd_load.c | 2 +- common/cmd_log.c | 4 +- common/cmd_md5sum.c | 2 +- common/cmd_mdio.c | 2 +- common/cmd_mem.c | 22 ++++---- common/cmd_mfsl.c | 10 ++-- common/cmd_mgdisk.c | 2 +- common/cmd_mii.c | 4 +- common/cmd_misc.c | 2 +- common/cmd_mmc.c | 14 ++-- common/cmd_mmc_spi.c | 3 +- common/cmd_mp.c | 8 +- common/cmd_mtdparts.c | 2 +- common/cmd_nand.c | 6 +- common/cmd_net.c | 6 +- common/cmd_nvedit.c | 22 ++++---- common/cmd_onenand.c | 12 ++-- common/cmd_otp.c | 2 +- common/cmd_pci.c | 2 +- common/cmd_portio.c | 4 +- common/cmd_pxe.c | 10 ++-- common/cmd_reiser.c | 4 +- common/cmd_sata.c | 8 +- common/cmd_scsi.c | 15 +++-- common/cmd_setexpr.c | 2 +- common/cmd_sf.c | 2 +- common/cmd_sha1sum.c | 2 +- common/cmd_source.c | 2 +- common/cmd_strings.c | 2 +- common/cmd_time.c | 4 +- common/cmd_ubi.c | 4 +- common/cmd_ubifs.c | 10 ++-- common/cmd_unzip.c | 2 +- common/cmd_usb.c | 6 +- common/command.c | 60 ++++++++++++++++++++ common/hush.c | 73 +++++++----------------- common/main.c | 98 +++++++++++---------------------- include/command.h | 24 ++++++++ include/common.h | 5 +- 65 files changed, 311 insertions(+), 305 deletions(-) -- 1.7.3.1

3 18

Re: [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
by Zach Sadecki 17 Jan '12

17 Jan '12

This patch will also fix a problem with mx28 boards that are depending on the OCOTP bits to set the MAC address (like the Denx m28 board). Now it simply fails with a "Warning: failed to set MAC address" if there's no environment variable instead of using the OCOTP bits like it should. This patch will fix that.

3 2

[U-Boot] OMAP3 performance regression in 2011.12
by Joe Woodward 17 Jan '12

17 Jan '12

Commit "armv7: disable L2 cache in cleanup_before_linux()" on 6th Dec 2011 by Aneesh V adds the following: arch/arm/cpu/armv7/cpu.c:cleanup_before_linux() ... v7_out_cache_disable(); ... The commit message implies this change was to make booting reliable on OMAP4 by disabling L2 cache before jumping to Linux. However, when running with a stock 3.2 Linux kernel on an OMAP3 it has the effect of massively reducing system performance (when running using an OMAP3- only 3.2 Linux Kernel on a GUSMTIX Overo OMAP3530). Therefore, I assume this means that the kernel isn't turning the L2 cache back on for an OMAP3 (at least with my kernel build)! So, my question is... Are there any Kconfig options in Linux that will re-enable the L2 cache (something obvious that I've missed), or is this commit just bad-news for OMAP3? Cheers, Joe

4 6

[U-Boot] [PATCH] arm: Add Prep subcommand support to bootm
by Simon Schwarz 17 Jan '12

17 Jan '12

Adds prep subcommand to bootm implementation of ARM. When bootm is called with the subcommand prep the function stops right after ATAGS creation and before announce_and_cleanup. This is used in savebp command Signed-off-by: Simon Schwarz <simonschwarzcor(a)gmail.com> ---- V2 changes: nothing V3 changes: nothing changes after slicing this from patch http://article.gmane.org/gmane.comp.boot-loaders.u-boot/106422: DEL Prototype declaration - not necessary if reordered DEL Most #ifdefs - relying on -ffunction-sections and --gc-sections to handle unused CHG reorganized bootm. powerpc implementation was the model ADD get_board_serial fake implementation - this is needed if setup_serial_tag is compiled but the board doesn't support it - tradeoff for removing #ifdefs --- arch/arm/lib/bootm.c | 330 +++++++++++++++++++++++++------------------------ 1 files changed, 168 insertions(+), 162 deletions(-) diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index 802e833..5f112e2 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -1,4 +1,8 @@ -/* +/* Copyright (C) 2011 + * Corscience GmbH & Co. KG - Simon Schwarz <schwarz(a)corscience.de> + * - Added prep subcommand support + * - Reorganized source - modeled after powerpc version + * * (C) Copyright 2002 * Sysgo Real-Time Solutions, GmbH <www.elinos.com> * Marius Groeger <mgroeger(a)sysgo.de> @@ -32,31 +36,16 @@ DECLARE_GLOBAL_DATA_PTR; -#if defined (CONFIG_SETUP_MEMORY_TAGS) || \ - defined (CONFIG_CMDLINE_TAG) || \ - defined (CONFIG_INITRD_TAG) || \ - defined (CONFIG_SERIAL_TAG) || \ - defined (CONFIG_REVISION_TAG) -static void setup_start_tag (bd_t *bd); - -# ifdef CONFIG_SETUP_MEMORY_TAGS -static void setup_memory_tags (bd_t *bd); -# endif -static void setup_commandline_tag (bd_t *bd, char *commandline); - -# ifdef CONFIG_INITRD_TAG -static void setup_initrd_tag (bd_t *bd, ulong initrd_start, - ulong initrd_end); -# endif -static void setup_end_tag (bd_t *bd); - +static void (*kernel_entry)(int zero, int arch, uint params); static struct tag *params; -#endif /* CONFIG_SETUP_MEMORY_TAGS || CONFIG_CMDLINE_TAG || CONFIG_INITRD_TAG */ -static ulong get_sp(void); -#if defined(CONFIG_OF_LIBFDT) -static int bootm_linux_fdt(int machid, bootm_headers_t *images); -#endif +static ulong get_sp(void) +{ + ulong ret; + + asm("mov %0, sp" : "=r"(ret) : ); + return ret; +} void arch_lmb_reserve(struct lmb *lmb) { @@ -80,85 +69,6 @@ void arch_lmb_reserve(struct lmb *lmb) gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size - sp); } -static void announce_and_cleanup(void) -{ - printf("\nStarting kernel ...\n\n"); - -#ifdef CONFIG_USB_DEVICE - { - extern void udc_disconnect(void); - udc_disconnect(); - } -#endif - cleanup_before_linux(); -} - -int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) -{ - bd_t *bd = gd->bd; - char *s; - int machid = bd->bi_arch_number; - void (*kernel_entry)(int zero, int arch, uint params); - -#ifdef CONFIG_CMDLINE_TAG - char *commandline = getenv ("bootargs"); -#endif - - if ((flag != 0) && (flag != BOOTM_STATE_OS_GO)) - return 1; - - s = getenv ("machid"); - if (s) { - machid = simple_strtoul (s, NULL, 16); - printf ("Using machid 0x%x from environment\n", machid); - } - - show_boot_progress (15); - -#ifdef CONFIG_OF_LIBFDT - if (images->ft_len) - return bootm_linux_fdt(machid, images); -#endif - - kernel_entry = (void (*)(int, int, uint))images->ep; - - debug ("## Transferring control to Linux (at address %08lx) ...\n", - (ulong) kernel_entry); - -#if defined (CONFIG_SETUP_MEMORY_TAGS) || \ - defined (CONFIG_CMDLINE_TAG) || \ - defined (CONFIG_INITRD_TAG) || \ - defined (CONFIG_SERIAL_TAG) || \ - defined (CONFIG_REVISION_TAG) - setup_start_tag (bd); -#ifdef CONFIG_SERIAL_TAG - setup_serial_tag (&params); -#endif -#ifdef CONFIG_REVISION_TAG - setup_revision_tag (&params); -#endif -#ifdef CONFIG_SETUP_MEMORY_TAGS - setup_memory_tags (bd); -#endif -#ifdef CONFIG_CMDLINE_TAG - setup_commandline_tag (bd, commandline); -#endif -#ifdef CONFIG_INITRD_TAG - if (images->rd_start && images->rd_end) - setup_initrd_tag (bd, images->rd_start, images->rd_end); -#endif - setup_end_tag(bd); -#endif - - announce_and_cleanup(); - - kernel_entry(0, machid, bd->bi_boot_params); - /* does not return */ - - return 1; -} - -#if defined(CONFIG_OF_LIBFDT) static int fixup_memory_node(void *blob) { bd_t *bd = gd->bd; @@ -174,54 +84,19 @@ static int fixup_memory_node(void *blob) return fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS); } -static int bootm_linux_fdt(int machid, bootm_headers_t *images) +static void announce_and_cleanup(void) { - ulong rd_len; - void (*kernel_entry)(int zero, int dt_machid, void *dtblob); - ulong of_size = images->ft_len; - char **of_flat_tree = &images->ft_addr; - ulong *initrd_start = &images->initrd_start; - ulong *initrd_end = &images->initrd_end; - struct lmb *lmb = &images->lmb; - int ret; - - kernel_entry = (void (*)(int, int, void *))images->ep; - - boot_fdt_add_mem_rsv_regions(lmb, *of_flat_tree); - - rd_len = images->rd_end - images->rd_start; - ret = boot_ramdisk_high(lmb, images->rd_start, rd_len, - initrd_start, initrd_end); - if (ret) - return ret; - - ret = boot_relocate_fdt(lmb, of_flat_tree, &of_size); - if (ret) - return ret; - - debug("## Transferring control to Linux (at address %08lx) ...\n", - (ulong) kernel_entry); - - fdt_chosen(*of_flat_tree, 1); - - fixup_memory_node(*of_flat_tree); - - fdt_initrd(*of_flat_tree, *initrd_start, *initrd_end, 1); - - announce_and_cleanup(); - - kernel_entry(0, machid, *of_flat_tree); - /* does not return */ + printf("\nStarting kernel ...\n\n"); - return 1; -} +#ifdef CONFIG_USB_DEVICE + { + extern void udc_disconnect(void); + udc_disconnect(); + } #endif + cleanup_before_linux(); +} -#if defined (CONFIG_SETUP_MEMORY_TAGS) || \ - defined (CONFIG_CMDLINE_TAG) || \ - defined (CONFIG_INITRD_TAG) || \ - defined (CONFIG_SERIAL_TAG) || \ - defined (CONFIG_REVISION_TAG) static void setup_start_tag (bd_t *bd) { params = (struct tag *) bd->bi_boot_params; @@ -237,7 +112,6 @@ static void setup_start_tag (bd_t *bd) } -#ifdef CONFIG_SETUP_MEMORY_TAGS static void setup_memory_tags (bd_t *bd) { int i; @@ -252,8 +126,6 @@ static void setup_memory_tags (bd_t *bd) params = tag_next (params); } } -#endif /* CONFIG_SETUP_MEMORY_TAGS */ - static void setup_commandline_tag (bd_t *bd, char *commandline) { @@ -280,8 +152,6 @@ static void setup_commandline_tag (bd_t *bd, char *commandline) params = tag_next (params); } - -#ifdef CONFIG_INITRD_TAG static void setup_initrd_tag (bd_t *bd, ulong initrd_start, ulong initrd_end) { /* an ATAG_INITRD node tells the kernel where the compressed @@ -295,9 +165,18 @@ static void setup_initrd_tag (bd_t *bd, ulong initrd_start, ulong initrd_end) params = tag_next (params); } -#endif /* CONFIG_INITRD_TAG */ -#ifdef CONFIG_SERIAL_TAG +/* This is a workaround - if boards don't implement + * get_board_serial */ +__attribute__((weak)) +void get_board_serial(struct tag_serialnr *serialnr) +{ + printf("This board does not implement get_board_serial() \ + but calls it serialnr is filled with junk!\n"); + serialnr->high = 0xABCDF; + serialnr->low = 0xABCDF; +} + void setup_serial_tag (struct tag **tmp) { struct tag *params = *tmp; @@ -312,9 +191,7 @@ void setup_serial_tag (struct tag **tmp) params = tag_next (params); *tmp = params; } -#endif -#ifdef CONFIG_REVISION_TAG void setup_revision_tag(struct tag **in_params) { u32 rev = 0; @@ -326,19 +203,148 @@ void setup_revision_tag(struct tag **in_params) params->u.revision.rev = rev; params = tag_next (params); } -#endif /* CONFIG_REVISION_TAG */ static void setup_end_tag (bd_t *bd) { params->hdr.tag = ATAG_NONE; params->hdr.size = 0; } -#endif /* CONFIG_SETUP_MEMORY_TAGS || CONFIG_CMDLINE_TAG || CONFIG_INITRD_TAG */ -static ulong get_sp(void) +static void create_atags(bootm_headers_t *images) { - ulong ret; + bd_t *bd = gd->bd; + char *commandline = getenv("bootargs"); - asm("mov %0, sp" : "=r"(ret) : ); - return ret; + setup_start_tag(bd); +#ifdef CONFIG_SERIAL_TAG + setup_serial_tag(&params); +#endif +#ifdef CONFIG_CMDLINE_TAG + setup_commandline_tag(gd->bd, commandline); +#endif +#ifdef CONFIG_REVISION_TAG + setup_revision_tag(&params); +#endif +#ifdef CONFIG_SETUP_MEMORY_TAGS + setup_memory_tags(bd); +#endif +#ifdef CONFIG_INITRD_TAG + if (images->rd_start && images->rd_end) + setup_initrd_tag(bd, images->rd_start, images->rd_end); +#endif + setup_end_tag(bd); +} + +static int create_fdt(bootm_headers_t *images) +{ + ulong of_size = images->ft_len; + char **of_flat_tree = &images->ft_addr; + ulong *initrd_start = &images->initrd_start; + ulong *initrd_end = &images->initrd_end; + struct lmb *lmb = &images->lmb; + ulong rd_len; + int ret; + + debug("using: FDT\n"); + + boot_fdt_add_mem_rsv_regions(lmb, *of_flat_tree); + + rd_len = images->rd_end - images->rd_start; + ret = boot_ramdisk_high(lmb, images->rd_start, rd_len, + initrd_start, initrd_end); + if (ret) + return ret; + + ret = boot_relocate_fdt(lmb, of_flat_tree, &of_size); + if (ret) + return ret; + + fdt_chosen(*of_flat_tree, 1); + fixup_memory_node(*of_flat_tree); + fdt_initrd(*of_flat_tree, *initrd_start, *initrd_end, 1); + + return 0; +} + +/* Subcommand: CMDLINE */ +static int boot_cmdline_linux(bootm_headers_t *images) +{ + return -1; /* not implemented */ +} + +/* Subcommand: BDT */ +static int boot_bd_t_linux(bootm_headers_t *images) +{ + return -1; /* not implemented */ +} + +/* Subcommand: PREP */ +static void boot_prep_linux(bootm_headers_t *images) +{ +#ifdef CONFIG_OF_LIBFDT + if (images->ft_len) { + debug("using: FDT\n"); + if (create_fdt(images)) { + printf("FDT creation failed! hanging..."); + hang(); + } + } else +#endif + { +#if defined(CONFIG_SETUP_MEMORY_TAGS) || \ + defined(CONFIG_CMDLINE_TAG) || \ + defined(CONFIG_INITRD_TAG) || \ + defined(CONFIG_SERIAL_TAG) || \ + defined(CONFIG_REVISION_TAG) + debug("using: ATAGS\n"); + create_atags(images); +#else + printf("FDT and ATAGS failed - hanging\n"); + hang(); +#endif + } + + kernel_entry = (void (*)(int, int, uint))images->ep; +} + +/* Subcommand: GO */ +static void boot_jump_linux(bootm_headers_t *images) +{ + int machid = gd->bd->bi_arch_number; + char *s; + s = getenv("machid"); + if (s) { + strict_strtoul(s, 16, (long unsigned int *) &machid); + debug("Using machid 0x%x from environment\n", machid); + } + + debug("Using machid 0x%x from bd\n", machid); + debug("## Transferring control to Linux (at address %08lx)" \ + "...\n", (ulong) kernel_entry); + show_boot_progress(15); + announce_and_cleanup(); + kernel_entry(0, machid, gd->bd->bi_boot_params); +} + +/* Main Entry point for arm bootm implementation + * + * Modeled after the powerpc implementation + * DIFFERENCE: Instead of calling prep and go at the end + * they are called if subommand is equal 0. + */ +int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) +{ + if (flag & BOOTM_STATE_OS_CMDLINE) + boot_cmdline_linux(images); + + if (flag & BOOTM_STATE_OS_BD_T) + boot_bd_t_linux(images); + + if (flag & BOOTM_STATE_OS_PREP || flag == 0) + boot_prep_linux(images); + + if (flag & BOOTM_STATE_OS_GO || flag == 0) + boot_jump_linux(images); + + return 0; } -- 1.7.4.1

3 8

[U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files
by Fabio Estevam 17 Jan '12

17 Jan '12

CONFIG_NET_MULTI is not used anymore, so remove it from board files. Cc: Marek Vasut <marek.vasut(a)gmail.com> Cc: Stefano Babic <sbabic(a)denx.de> Cc: Kumar Gala <kumar.gala(a)freescale.com> Cc: Sandeep Paulraj <s-paulraj(a)ti.com> Signed-off-by: Fabio Estevam <fabio.estevam(a)freescale.com> --- include/configs/P1010RDB.h | 5 ----- include/configs/PM826.h | 2 -- include/configs/PM828.h | 2 -- include/configs/cam_enc_4xx.h | 1 - include/configs/coreboot.h | 6 ------ include/configs/da850_am18xxevm.h | 1 - include/configs/ecovec.h | 1 - include/configs/efikamx.h | 1 - include/configs/enbw_cmc.h | 1 - include/configs/ethernut5.h | 1 - include/configs/flea3.h | 1 - include/configs/m28evk.h | 1 - include/configs/omap3_evm_common.h | 1 - include/configs/omap3_mvblx.h | 1 - include/configs/p1_p2_rdb_pc.h | 7 ------- include/configs/tam3517-common.h | 1 - 16 files changed, 0 insertions(+), 33 deletions(-) diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index af4609f..a9251b4 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -518,11 +518,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif -#if defined(CONFIG_TSEC_ENET) -#ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI -#endif - #define CONFIG_MII /* MII PHY management */ #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ #define CONFIG_TSEC1 1 diff --git a/include/configs/PM826.h b/include/configs/PM826.h index f4f9305..cde0fd6 100644 --- a/include/configs/PM826.h +++ b/include/configs/PM826.h @@ -100,11 +100,9 @@ * * if CONFIG_ETHER_ON_SCC is selected, then * - CONFIG_ETHER_INDEX must be set to the channel number (1-4) - * - CONFIG_NET_MULTI must not be defined * * if CONFIG_ETHER_ON_FCC is selected, then * - one or more CONFIG_ETHER_ON_FCCx (x=1,2,3) must also be selected - * - CONFIG_NET_MULTI must be defined * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. diff --git a/include/configs/PM828.h b/include/configs/PM828.h index 28666d6..74ced5a 100644 --- a/include/configs/PM828.h +++ b/include/configs/PM828.h @@ -100,11 +100,9 @@ * * if CONFIG_ETHER_ON_SCC is selected, then * - CONFIG_ETHER_INDEX must be set to the channel number (1-4) - * - CONFIG_NET_MULTI must not be defined * * if CONFIG_ETHER_ON_FCC is selected, then * - one or more CONFIG_ETHER_ON_FCCx (x=1,2,3) must also be selected - * - CONFIG_NET_MULTI must be defined * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h index a21d448..50a967c 100644 --- a/include/configs/cam_enc_4xx.h +++ b/include/configs/cam_enc_4xx.h @@ -68,7 +68,6 @@ #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_NET_MULTI #define CONFIG_CMD_MII #define CONFIG_SYS_DCACHE_OFF #define CONFIG_RESET_PHY_R diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index 348a25b..2c65d74 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -216,10 +216,4 @@ */ #define CONFIG_PCI -/*----------------------------------------------------------------------- - * Network device support - */ -#define CONFIG_NET_MULTI - - #endif /* __CONFIG_H */ diff --git a/include/configs/da850_am18xxevm.h b/include/configs/da850_am18xxevm.h index 9b7bf1e..6fb3920 100644 --- a/include/configs/da850_am18xxevm.h +++ b/include/configs/da850_am18xxevm.h @@ -125,7 +125,6 @@ #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_NET_MULTI #endif #ifdef CONFIG_USE_NOR diff --git a/include/configs/ecovec.h b/include/configs/ecovec.h index 2e2a9a7..4549a4c 100644 --- a/include/configs/ecovec.h +++ b/include/configs/ecovec.h @@ -88,7 +88,6 @@ #define CONFIG_SH_I2C_BASE1 0xA4750000 /* Ether */ -#define CONFIG_NET_MULTI 1 #define CONFIG_SH_ETHER 1 #define CONFIG_SH_ETHER_USE_PORT (0) #define CONFIG_SH_ETHER_PHY_ADDR (0x1f) diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h index 522487b..e2f0f74 100644 --- a/include/configs/efikamx.h +++ b/include/configs/efikamx.h @@ -206,7 +206,6 @@ /* USB NET */ #ifdef CONFIG_CMD_NET #define CONFIG_USB_ETHER_ASIX -#define CONFIG_NET_MULTI #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #endif diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h index c427dc7..5c14379 100644 --- a/include/configs/enbw_cmc.h +++ b/include/configs/enbw_cmc.h @@ -146,7 +146,6 @@ #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_NET_MULTI #endif /* diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index f878665..604d2dd 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -179,7 +179,6 @@ #endif /* Ethernet */ -#define CONFIG_NET_MULTI #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_MACB #define CONFIG_RMII diff --git a/include/configs/flea3.h b/include/configs/flea3.h index aac3930..649e272 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -113,7 +113,6 @@ /* * Ethernet on SOC (FEC) */ -#define CONFIG_NET_MULTI #define CONFIG_FEC_MXC #define IMX_FEC_BASE FEC_BASE_ADDR #define CONFIG_PHYLIB diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index 39c841f..51eb1c1 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -179,7 +179,6 @@ * Ethernet on SOC (FEC) */ #ifdef CONFIG_CMD_NET -#define CONFIG_NET_MULTI #define CONFIG_ETHPRIME "FEC0" #define CONFIG_FEC_MXC #define CONFIG_FEC_MXC_MULTI diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index b256317..4910dda 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -248,7 +248,6 @@ #if defined(CONFIG_CMD_NET) /* Ethernet (SMSC9115 from SMSC9118 family) */ -#define CONFIG_NET_MULTI #define CONFIG_SMC911X #define CONFIG_SMC911X_32_BIT #define CONFIG_SMC911X_BASE 0x2C000000 diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h index eb51ea9..0d78529 100644 --- a/include/configs/omap3_mvblx.h +++ b/include/configs/omap3_mvblx.h @@ -272,7 +272,6 @@ *---------------------------------------------------------------------------- */ #if defined(CONFIG_CMD_NET) - #define CONFIG_NET_MULTI #define CONFIG_SMC911X 1 #define CONFIG_SMC911X_32_BIT #define CONFIG_SMC911X_BASE 0x2C000000 diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 8e8fa16..9297dd0 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -630,7 +630,6 @@ #endif #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ -#define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_E1000 /* Defind e1000 pci Ethernet card*/ #define CONFIG_CMD_PCI @@ -640,12 +639,6 @@ #define CONFIG_DOS_PARTITION #endif /* CONFIG_PCI */ -#if defined(CONFIG_TSEC_ENET) - -#ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI -#endif - #define CONFIG_MII /* MII PHY management */ #define CONFIG_TSEC1 #define CONFIG_TSEC1_NAME "eTSEC1" diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 817d468..6682714 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -238,7 +238,6 @@ #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_NET_MULTI /* Defines for SPL */ #define CONFIG_SPL -- 1.7.1

7 13

[U-Boot] [PATCH] i.mx6q: mx6qsabrelite: Add the ethernet function support
by Dirk Behme 17 Jan '12

17 Jan '12

From: Jason Liu <jason.hui(a)linaro.org> Signed-off-by: Jason Liu <jason.hui(a)linaro.org> Signed-off-by: Eric Miao <eric.miao(a)linaro.org> CC: Jason Liu <jason.hui(a)linaro.org> CC: Stefano Babic <sbabic(a)denx.de> --- Note: This patch is against the recent head of u-boot-imx.git including the SabreLite support: 5b894e4d00ff94a221f8cc23d54d08b889f54190 i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board Note: tools/checkpatch.pl reports: total: 0 errors, 0 warnings, 157 lines checked NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE 0001-i.mx6q-mx6qsabrelite-Add-the-ethernet-function-suppo.patch has no obvious style problems and is ready for submission. board/freescale/mx6qsabrelite/mx6qsabrelite.c | 108 +++++++++++++++++++++++++ include/configs/mx6qsabrelite.h | 13 +++- 2 files changed, 119 insertions(+), 2 deletions(-) diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 4028789..d80165e 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -29,6 +29,8 @@ #include <asm/gpio.h> #include <mmc.h> #include <fsl_esdhc.h> +#include <miiphy.h> +#include <netdev.h> DECLARE_GLOBAL_DATA_PTR; @@ -40,6 +42,10 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) +#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS) + int dram_init(void) { gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); @@ -72,6 +78,59 @@ iomux_v3_cfg_t usdhc4_pads[] = { MX6Q_PAD_NANDF_D6__GPIO_2_6 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; +iomux_v3_cfg_t enet_pads1[] = { + MX6Q_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6Q_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + /* pin 35 - 1 (PHY_AD2) on reset */ + MX6Q_PAD_RGMII_RXC__GPIO_6_30 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 32 - 1 - (MODE0) all */ + MX6Q_PAD_RGMII_RD0__GPIO_6_25 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 31 - 1 - (MODE1) all */ + MX6Q_PAD_RGMII_RD1__GPIO_6_27 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 28 - 1 - (MODE2) all */ + MX6Q_PAD_RGMII_RD2__GPIO_6_28 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 27 - 1 - (MODE3) all */ + MX6Q_PAD_RGMII_RD3__GPIO_6_29 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */ + MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 42 PHY nRST */ + MX6Q_PAD_EIM_D23__GPIO_3_23 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +iomux_v3_cfg_t enet_pads2[] = { + MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), +}; + +static void setup_iomux_enet(void) +{ + gpio_direction_output(87, 0); /* GPIO 3-23 */ + gpio_direction_output(190, 1); /* GPIO 6-30 */ + gpio_direction_output(185, 1); /* GPIO 6-25 */ + gpio_direction_output(187, 1); /* GPIO 6-27 */ + gpio_direction_output(188, 1); /* GPIO 6-28*/ + gpio_direction_output(189, 1); /* GPIO 6-29 */ + imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1)); + gpio_direction_output(184, 1); /* GPIO 6-24 */ + + /* Need delay 10ms according to KSZ9021 spec */ + udelay(1000 * 10); + gpio_direction_output(87, 1); /* GPIO 3-23 */ + + imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); +} + static void setup_iomux_uart(void) { imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); @@ -128,6 +187,55 @@ int board_mmc_init(bd_t *bis) } #endif +#define MII_1000BASET_CTRL 0x9 +#define MII_EXTENDED_CTRL 0xb +#define MII_EXTENDED_DATAW 0xc + +int fecmxc_mii_postcall(int phy) +{ + /* prefer master mode */ + miiphy_write("FEC", phy, MII_1000BASET_CTRL, 0x0f00); + + /* min rx data delay */ + miiphy_write("FEC", phy, MII_EXTENDED_CTRL, 0x8105); + miiphy_write("FEC", phy, MII_EXTENDED_DATAW, 0x0000); + + /* max rx/tx clock delay, min rx/tx control delay */ + miiphy_write("FEC", phy, MII_EXTENDED_CTRL, 0x8104); + miiphy_write("FEC", phy, MII_EXTENDED_DATAW, 0xf0f0); + miiphy_write("FEC", phy, MII_EXTENDED_CTRL, 0x104); + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + struct eth_device *dev; + int ret; + + setup_iomux_enet(); + + ret = cpu_eth_init(bis); + if (ret) { + printf("FEC MXC: %s:failed\n", __func__); + return ret; + } + + dev = eth_get_dev_by_name("FEC"); + if (!dev) { + printf("FEC MXC: Unable to get FEC device entry\n"); + return -EINVAL; + } + + ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall); + if (ret) { + printf("FEC MXC: Unable to register FEC mii postcall\n"); + return ret; + } + + return 0; +} + int board_early_init_f(void) { setup_iomux_uart(); diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index 464f0ec..840e271 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -56,6 +56,17 @@ #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 6 + /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 @@ -66,8 +77,6 @@ #include <config_cmd_default.h> #undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS #define CONFIG_BOOTDELAY 3 -- 1.7.0.4

2 1

[U-Boot] [PATCH] i.mx6: mx6x_pins: Fix uart txd definitions
by Dirk Behme 17 Jan '12

17 Jan '12

From: Troy Kisky <troy.kisky(a)boundarydevices.com> The uart txd pad can also provide the rxd function. But it does not stop its tx role. This could be used for a half duplex serial port. Change names to reduce confusion. Signed-off-by: Troy Kisky <troy.kisky(a)boundarydevices.com> CC: Troy Kisky <troy.kisky(a)boundarydevices.com> CC: Jason Liu <jason.hui(a)linaro.org> CC: Stefano Babic <sbabic(a)denx.de> --- Note: tools/checkpatch.pl reports various 'WARNING: line over 80 characters' on this patch. But keep this to be consistent with the other pinmux definitions. arch/arm/include/asm/arch-mx6/mx6x_pins.h | 36 +++++++++------------------- 1 files changed, 12 insertions(+), 24 deletions(-) diff --git a/arch/arm/include/asm/arch-mx6/mx6x_pins.h b/arch/arm/include/asm/arch-mx6/mx6x_pins.h index b3f613c..afaa068 100644 --- a/arch/arm/include/asm/arch-mx6/mx6x_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6x_pins.h @@ -220,7 +220,7 @@ enum { MX6Q_PAD_EIM_D24__WEIM_WEIM_D_24 = IOMUX_PAD(0x03C8, 0x00B4, 0, 0x0000, 0, 0), MX6Q_PAD_EIM_D24__ECSPI4_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 1, 0x0000, 0, 0), MX6Q_PAD_EIM_D24__UART3_TXD = IOMUX_PAD(0x03C8, 0x00B4, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D24__UART3_RXD = IOMUX_PAD(0x03C8, 0x00B4, 2, 0x0930, 0, 0), + MX6Q_PAD_EIM_D24__UART3_TXD_RXD = IOMUX_PAD(0x03C8, 0x00B4, 2, 0x0930, 0, 0), MX6Q_PAD_EIM_D24__ECSPI1_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 3, 0x0808, 0, 0), MX6Q_PAD_EIM_D24__ECSPI2_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 4, 0x0000, 0, 0), MX6Q_PAD_EIM_D24__GPIO_3_24 = IOMUX_PAD(0x03C8, 0x00B4, 5, 0x0000, 0, 0), @@ -228,7 +228,6 @@ enum { MX6Q_PAD_EIM_D24__UART1_DTR = IOMUX_PAD(0x03C8, 0x00B4, 7, 0x0000, 0, 0), MX6Q_PAD_EIM_D25__WEIM_WEIM_D_25 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, 0), MX6Q_PAD_EIM_D25__ECSPI4_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D25__UART3_TXD = IOMUX_PAD(0x03CC, 0x00B8, 2, 0x0000, 0, 0), MX6Q_PAD_EIM_D25__UART3_RXD = IOMUX_PAD(0x03CC, 0x00B8, 2, 0x0930, 1, 0), MX6Q_PAD_EIM_D25__ECSPI1_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 3, 0x080C, 0, 0), MX6Q_PAD_EIM_D25__ECSPI2_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 4, 0x0000, 0, 0), @@ -240,7 +239,7 @@ enum { MX6Q_PAD_EIM_D26__IPU1_CSI0_D_1 = IOMUX_PAD(0x03D0, 0x00BC, 2, 0x0000, 0, 0), MX6Q_PAD_EIM_D26__IPU2_CSI1_D_14 = IOMUX_PAD(0x03D0, 0x00BC, 3, 0x08C0, 0, 0), MX6Q_PAD_EIM_D26__UART2_TXD = IOMUX_PAD(0x03D0, 0x00BC, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_D26__UART2_RXD = IOMUX_PAD(0x03D0, 0x00BC, 4, 0x0928, 0, 0), + MX6Q_PAD_EIM_D26__UART2_TXD_RXD = IOMUX_PAD(0x03D0, 0x00BC, 4, 0x0928, 0, 0), MX6Q_PAD_EIM_D26__GPIO_3_26 = IOMUX_PAD(0x03D0, 0x00BC, 5, 0x0000, 0, 0), MX6Q_PAD_EIM_D26__IPU1_SISG_2 = IOMUX_PAD(0x03D0, 0x00BC, 6, 0x0000, 0, 0), MX6Q_PAD_EIM_D26__IPU1_DISP1_DAT_22 = IOMUX_PAD(0x03D0, 0x00BC, 7, 0x0000, 0, 0), @@ -248,7 +247,6 @@ enum { MX6Q_PAD_EIM_D27__IPU1_DI1_PIN13 = IOMUX_PAD(0x03D4, 0x00C0, 1, 0x0000, 0, 0), MX6Q_PAD_EIM_D27__IPU1_CSI0_D_0 = IOMUX_PAD(0x03D4, 0x00C0, 2, 0x0000, 0, 0), MX6Q_PAD_EIM_D27__IPU2_CSI1_D_13 = IOMUX_PAD(0x03D4, 0x00C0, 3, 0x08BC, 0, 0), - MX6Q_PAD_EIM_D27__UART2_TXD = IOMUX_PAD(0x03D4, 0x00C0, 4, 0x0000, 0, 0), MX6Q_PAD_EIM_D27__UART2_RXD = IOMUX_PAD(0x03D4, 0x00C0, 4, 0x0928, 1, 0), MX6Q_PAD_EIM_D27__GPIO_3_27 = IOMUX_PAD(0x03D4, 0x00C0, 5, 0x0000, 0, 0), MX6Q_PAD_EIM_D27__IPU1_SISG_3 = IOMUX_PAD(0x03D4, 0x00C0, 6, 0x0000, 0, 0), @@ -938,7 +936,7 @@ enum { MX6Q_PAD_KEY_COL0__AUDMUX_AUD5_TXC = IOMUX_PAD(0x05C8, 0x01F8, 2, 0x07DC, 1, 0), MX6Q_PAD_KEY_COL0__KPP_COL_0 = IOMUX_PAD(0x05C8, 0x01F8, 3, 0x0000, 0, 0), MX6Q_PAD_KEY_COL0__UART4_TXD = IOMUX_PAD(0x05C8, 0x01F8, 4, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL0__UART4_RXD = IOMUX_PAD(0x05C8, 0x01F8, 4, 0x0938, 0, 0), + MX6Q_PAD_KEY_COL0__UART4_TXD_RXD = IOMUX_PAD(0x05C8, 0x01F8, 4, 0x0938, 0, 0), MX6Q_PAD_KEY_COL0__GPIO_4_6 = IOMUX_PAD(0x05C8, 0x01F8, 5, 0x0000, 0, 0), MX6Q_PAD_KEY_COL0__DCIC1_DCIC_OUT = IOMUX_PAD(0x05C8, 0x01F8, 6, 0x0000, 0, 0), MX6Q_PAD_KEY_COL0__SRC_ANY_PU_RST = IOMUX_PAD(0x05C8, 0x01F8, 7, 0x0000, 0, 0), @@ -946,7 +944,6 @@ enum { MX6Q_PAD_KEY_ROW0__ENET_TDATA_3 = IOMUX_PAD(0x05CC, 0x01FC, 1, 0x0000, 0, 0), MX6Q_PAD_KEY_ROW0__AUDMUX_AUD5_TXD = IOMUX_PAD(0x05CC, 0x01FC, 2, 0x07D0, 1, 0), MX6Q_PAD_KEY_ROW0__KPP_ROW_0 = IOMUX_PAD(0x05CC, 0x01FC, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW0__UART4_TXD = IOMUX_PAD(0x05CC, 0x01FC, 4, 0x0000, 0, 0), MX6Q_PAD_KEY_ROW0__UART4_RXD = IOMUX_PAD(0x05CC, 0x01FC, 4, 0x0938, 1, 0), MX6Q_PAD_KEY_ROW0__GPIO_4_7 = IOMUX_PAD(0x05CC, 0x01FC, 5, 0x0000, 0, 0), MX6Q_PAD_KEY_ROW0__DCIC2_DCIC_OUT = IOMUX_PAD(0x05CC, 0x01FC, 6, 0x0000, 0, 0), @@ -956,7 +953,7 @@ enum { MX6Q_PAD_KEY_COL1__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x05D0, 0x0200, 2, 0x07E0, 1, 0), MX6Q_PAD_KEY_COL1__KPP_COL_1 = IOMUX_PAD(0x05D0, 0x0200, 3, 0x0000, 0, 0), MX6Q_PAD_KEY_COL1__UART5_TXD = IOMUX_PAD(0x05D0, 0x0200, 4, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL1__UART5_RXD = IOMUX_PAD(0x05D0, 0x0200, 4, 0x0940, 0, 0), + MX6Q_PAD_KEY_COL1__UART5_TXD_RXD = IOMUX_PAD(0x05D0, 0x0200, 4, 0x0940, 0, 0), MX6Q_PAD_KEY_COL1__GPIO_4_8 = IOMUX_PAD(0x05D0, 0x0200, 5, 0x0000, 0, 0), MX6Q_PAD_KEY_COL1__USDHC1_VSELECT = IOMUX_PAD(0x05D0, 0x0200, 6, 0x0000, 0, 0), MX6Q_PAD_KEY_COL1__PL301MX_PER1_HADR_1 = IOMUX_PAD(0x05D0, 0x0200, 7, 0x0000, 0, 0), @@ -964,7 +961,6 @@ enum { MX6Q_PAD_KEY_ROW1__ENET_COL = IOMUX_PAD(0x05D4, 0x0204, 1, 0x0000, 0, 0), MX6Q_PAD_KEY_ROW1__AUDMUX_AUD5_RXD = IOMUX_PAD(0x05D4, 0x0204, 2, 0x07CC, 1, 0), MX6Q_PAD_KEY_ROW1__KPP_ROW_1 = IOMUX_PAD(0x05D4, 0x0204, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW1__UART5_TXD = IOMUX_PAD(0x05D4, 0x0204, 4, 0x0000, 0, 0), MX6Q_PAD_KEY_ROW1__UART5_RXD = IOMUX_PAD(0x05D4, 0x0204, 4, 0x0940, 1, 0), MX6Q_PAD_KEY_ROW1__GPIO_4_9 = IOMUX_PAD(0x05D4, 0x0204, 5, 0x0000, 0, 0), MX6Q_PAD_KEY_ROW1__USDHC2_VSELECT = IOMUX_PAD(0x05D4, 0x0204, 6, 0x0000, 0, 0), @@ -1085,7 +1081,7 @@ enum { MX6Q_PAD_GPIO_7__EPIT1_EPITO = IOMUX_PAD(0x0610, 0x0240, 2, 0x0000, 0, 0), MX6Q_PAD_GPIO_7__CAN1_TXCAN = IOMUX_PAD(0x0610, 0x0240, 3, 0x0000, 0, 0), MX6Q_PAD_GPIO_7__UART2_TXD = IOMUX_PAD(0x0610, 0x0240, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_7__UART2_RXD = IOMUX_PAD(0x0610, 0x0240, 4, 0x0928, 2, 0), + MX6Q_PAD_GPIO_7__UART2_TXD_RXD = IOMUX_PAD(0x0610, 0x0240, 4, 0x0928, 2, 0), MX6Q_PAD_GPIO_7__GPIO_1_7 = IOMUX_PAD(0x0610, 0x0240, 5, 0x0000, 0, 0), MX6Q_PAD_GPIO_7__SPDIF_PLOCK = IOMUX_PAD(0x0610, 0x0240, 6, 0x0000, 0, 0), MX6Q_PAD_GPIO_7__USBOH3_OTGUSB_HST_MODE = IOMUX_PAD(0x0610, 0x0240, 7, 0x0000, 0, 0), @@ -1093,7 +1089,6 @@ enum { MX6Q_PAD_GPIO_8__ANATOP_ANATOP_32K_OUT = IOMUX_PAD(0x0614, 0x0244, 1, 0x0000, 0, 0), MX6Q_PAD_GPIO_8__EPIT2_EPITO = IOMUX_PAD(0x0614, 0x0244, 2, 0x0000, 0, 0), MX6Q_PAD_GPIO_8__CAN1_RXCAN = IOMUX_PAD(0x0614, 0x0244, 3, 0x07E4, 1, 0), - MX6Q_PAD_GPIO_8__UART2_TXD = IOMUX_PAD(0x0614, 0x0244, 4, 0x0000, 0, 0), MX6Q_PAD_GPIO_8__UART2_RXD = IOMUX_PAD(0x0614, 0x0244, 4, 0x0928, 3, 0), MX6Q_PAD_GPIO_8__GPIO_1_8 = IOMUX_PAD(0x0614, 0x0244, 5, 0x0000, 0, 0), MX6Q_PAD_GPIO_8__SPDIF_SRCLK = IOMUX_PAD(0x0614, 0x0244, 6, 0x0000, 0, 0), @@ -1208,7 +1203,7 @@ enum { MX6Q_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC = IOMUX_PAD(0x0650, 0x0280, 1, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT10__ECSPI2_MISO = IOMUX_PAD(0x0650, 0x0280, 2, 0x0814, 2, 0), MX6Q_PAD_CSI0_DAT10__UART1_TXD = IOMUX_PAD(0x0650, 0x0280, 3, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT10__UART1_RXD = IOMUX_PAD(0x0650, 0x0280, 3, 0x0920, 0, 0), + MX6Q_PAD_CSI0_DAT10__UART1_TXD_RXD = IOMUX_PAD(0x0650, 0x0280, 3, 0x0920, 0, 0), MX6Q_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 = IOMUX_PAD(0x0650, 0x0280, 4, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT10__GPIO_5_28 = IOMUX_PAD(0x0650, 0x0280, 5, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT10__MMDC_MMDC_DEBUG_33 = IOMUX_PAD(0x0650, 0x0280, 6, 0x0000, 0, 0), @@ -1216,7 +1211,6 @@ enum { MX6Q_PAD_CSI0_DAT11__IPU1_CSI0_D_11 = IOMUX_PAD(0x0654, 0x0284, 0, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS = IOMUX_PAD(0x0654, 0x0284, 1, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT11__ECSPI2_SS0 = IOMUX_PAD(0x0654, 0x0284, 2, 0x081C, 2, 0), - MX6Q_PAD_CSI0_DAT11__UART1_TXD = IOMUX_PAD(0x0654, 0x0284, 3, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT11__UART1_RXD = IOMUX_PAD(0x0654, 0x0284, 3, 0x0920, 1, 0), MX6Q_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 = IOMUX_PAD(0x0654, 0x0284, 4, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT11__GPIO_5_29 = IOMUX_PAD(0x0654, 0x0284, 5, 0x0000, 0, 0), @@ -1226,7 +1220,7 @@ enum { MX6Q_PAD_CSI0_DAT12__WEIM_WEIM_D_8 = IOMUX_PAD(0x0658, 0x0288, 1, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT12__PCIE_CTRL_MUX_16 = IOMUX_PAD(0x0658, 0x0288, 2, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT12__UART4_TXD = IOMUX_PAD(0x0658, 0x0288, 3, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT12__UART4_RXD = IOMUX_PAD(0x0658, 0x0288, 3, 0x0938, 2, 0), + MX6Q_PAD_CSI0_DAT12__UART4_TXD_RXD = IOMUX_PAD(0x0658, 0x0288, 3, 0x0938, 2, 0), MX6Q_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 = IOMUX_PAD(0x0658, 0x0288, 4, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT12__GPIO_5_30 = IOMUX_PAD(0x0658, 0x0288, 5, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT12__MMDC_MMDC_DEBUG_35 = IOMUX_PAD(0x0658, 0x0288, 6, 0x0000, 0, 0), @@ -1234,7 +1228,6 @@ enum { MX6Q_PAD_CSI0_DAT13__IPU1_CSI0_D_13 = IOMUX_PAD(0x065C, 0x028C, 0, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT13__WEIM_WEIM_D_9 = IOMUX_PAD(0x065C, 0x028C, 1, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT13__PCIE_CTRL_MUX_17 = IOMUX_PAD(0x065C, 0x028C, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT13__UART4_TXD = IOMUX_PAD(0x065C, 0x028C, 3, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT13__UART4_RXD = IOMUX_PAD(0x065C, 0x028C, 3, 0x0938, 3, 0), MX6Q_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 = IOMUX_PAD(0x065C, 0x028C, 4, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT13__GPIO_5_31 = IOMUX_PAD(0x065C, 0x028C, 5, 0x0000, 0, 0), @@ -1244,7 +1237,7 @@ enum { MX6Q_PAD_CSI0_DAT14__WEIM_WEIM_D_10 = IOMUX_PAD(0x0660, 0x0290, 1, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT14__PCIE_CTRL_MUX_18 = IOMUX_PAD(0x0660, 0x0290, 2, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT14__UART5_TXD = IOMUX_PAD(0x0660, 0x0290, 3, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT14__UART5_RXD = IOMUX_PAD(0x0660, 0x0290, 3, 0x0940, 2, 0), + MX6Q_PAD_CSI0_DAT14__UART5_TXD_RXD = IOMUX_PAD(0x0660, 0x0290, 3, 0x0940, 2, 0), MX6Q_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 = IOMUX_PAD(0x0660, 0x0290, 4, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT14__GPIO_6_0 = IOMUX_PAD(0x0660, 0x0290, 5, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT14__MMDC_MMDC_DEBUG_37 = IOMUX_PAD(0x0660, 0x0290, 6, 0x0000, 0, 0), @@ -1252,7 +1245,6 @@ enum { MX6Q_PAD_CSI0_DAT15__IPU1_CSI0_D_15 = IOMUX_PAD(0x0664, 0x0294, 0, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT15__WEIM_WEIM_D_11 = IOMUX_PAD(0x0664, 0x0294, 1, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT15__PCIE_CTRL_MUX_19 = IOMUX_PAD(0x0664, 0x0294, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT15__UART5_TXD = IOMUX_PAD(0x0664, 0x0294, 3, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT15__UART5_RXD = IOMUX_PAD(0x0664, 0x0294, 3, 0x0940, 3, 0), MX6Q_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 = IOMUX_PAD(0x0664, 0x0294, 4, 0x0000, 0, 0), MX6Q_PAD_CSI0_DAT15__GPIO_6_1 = IOMUX_PAD(0x0664, 0x0294, 5, 0x0000, 0, 0), @@ -1318,7 +1310,7 @@ enum { MX6Q_PAD_TEST_MODE__TCU_TEST_MODE = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 = IOMUX_PAD(0x0690, 0x02A8, 0, 0x0000, 0, 0), MX6Q_PAD_SD3_DAT7__UART1_TXD = IOMUX_PAD(0x0690, 0x02A8, 1, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT7__UART1_RXD = IOMUX_PAD(0x0690, 0x02A8, 1, 0x0920, 2, 0), + MX6Q_PAD_SD3_DAT7__UART1_TXD_RXD = IOMUX_PAD(0x0690, 0x02A8, 1, 0x0920, 2, 0), MX6Q_PAD_SD3_DAT7__PCIE_CTRL_MUX_24 = IOMUX_PAD(0x0690, 0x02A8, 2, 0x0000, 0, 0), MX6Q_PAD_SD3_DAT7__USBOH3_UH3_DFD_OUT_0 = IOMUX_PAD(0x0690, 0x02A8, 3, 0x0000, 0, 0), MX6Q_PAD_SD3_DAT7__USBOH3_UH2_DFD_OUT_0 = IOMUX_PAD(0x0690, 0x02A8, 4, 0x0000, 0, 0), @@ -1326,7 +1318,6 @@ enum { MX6Q_PAD_SD3_DAT7__MIPI_CORE_DPHY_IN_12 = IOMUX_PAD(0x0690, 0x02A8, 6, 0x0000, 0, 0), MX6Q_PAD_SD3_DAT7__USBPHY2_CLK20DIV = IOMUX_PAD(0x0690, 0x02A8, 7, 0x0000, 0, 0), MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 = IOMUX_PAD(0x0694, 0x02AC, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT6__UART1_TXD = IOMUX_PAD(0x0694, 0x02AC, 1, 0x0000, 0, 0), MX6Q_PAD_SD3_DAT6__UART1_RXD = IOMUX_PAD(0x0694, 0x02AC, 1, 0x0920, 3, 0), MX6Q_PAD_SD3_DAT6__PCIE_CTRL_MUX_25 = IOMUX_PAD(0x0694, 0x02AC, 2, 0x0000, 0, 0), MX6Q_PAD_SD3_DAT6__USBOH3_UH3_DFD_OUT_1 = IOMUX_PAD(0x0694, 0x02AC, 3, 0x0000, 0, 0), @@ -1336,7 +1327,7 @@ enum { MX6Q_PAD_SD3_DAT6__ANATOP_TESTO_10 = IOMUX_PAD(0x0694, 0x02AC, 7, 0x0000, 0, 0), MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 = IOMUX_PAD(0x0698, 0x02B0, 0, 0x0000, 0, 0), MX6Q_PAD_SD3_DAT5__UART2_TXD = IOMUX_PAD(0x0698, 0x02B0, 1, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT5__UART2_RXD = IOMUX_PAD(0x0698, 0x02B0, 1, 0x0928, 4, 0), + MX6Q_PAD_SD3_DAT5__UART2_TXD_RXD = IOMUX_PAD(0x0698, 0x02B0, 1, 0x0928, 4, 0), MX6Q_PAD_SD3_DAT5__PCIE_CTRL_MUX_26 = IOMUX_PAD(0x0698, 0x02B0, 2, 0x0000, 0, 0), MX6Q_PAD_SD3_DAT5__USBOH3_UH3_DFD_OUT_2 = IOMUX_PAD(0x0698, 0x02B0, 3, 0x0000, 0, 0), MX6Q_PAD_SD3_DAT5__USBOH3_UH2_DFD_OUT_2 = IOMUX_PAD(0x0698, 0x02B0, 4, 0x0000, 0, 0), @@ -1344,7 +1335,6 @@ enum { MX6Q_PAD_SD3_DAT5__MIPI_CORE_DPHY_IN_14 = IOMUX_PAD(0x0698, 0x02B0, 6, 0x0000, 0, 0), MX6Q_PAD_SD3_DAT5__ANATOP_TESTO_11 = IOMUX_PAD(0x0698, 0x02B0, 7, 0x0000, 0, 0), MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 = IOMUX_PAD(0x069C, 0x02B4, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT4__UART2_TXD = IOMUX_PAD(0x069C, 0x02B4, 1, 0x0000, 0, 0), MX6Q_PAD_SD3_DAT4__UART2_RXD = IOMUX_PAD(0x069C, 0x02B4, 1, 0x0928, 5, 0), MX6Q_PAD_SD3_DAT4__PCIE_CTRL_MUX_27 = IOMUX_PAD(0x069C, 0x02B4, 2, 0x0000, 0, 0), MX6Q_PAD_SD3_DAT4__USBOH3_UH3_DFD_OUT_3 = IOMUX_PAD(0x069C, 0x02B4, 3, 0x0000, 0, 0), @@ -1471,13 +1461,12 @@ enum { MX6Q_PAD_SD4_CMD__USDHC4_CMD = IOMUX_PAD(0x06DC, 0x02F4, 16, 0x0000, 0, 0), MX6Q_PAD_SD4_CMD__RAWNAND_RDN = IOMUX_PAD(0x06DC, 0x02F4, 1, 0x0000, 0, 0), MX6Q_PAD_SD4_CMD__UART3_TXD = IOMUX_PAD(0x06DC, 0x02F4, 2, 0x0000, 0, 0), - MX6Q_PAD_SD4_CMD__UART3_RXD = IOMUX_PAD(0x06DC, 0x02F4, 2, 0x0930, 2, 0), + MX6Q_PAD_SD4_CMD__UART3_TXD_RXD = IOMUX_PAD(0x06DC, 0x02F4, 2, 0x0930, 2, 0), MX6Q_PAD_SD4_CMD__PCIE_CTRL_MUX_5 = IOMUX_PAD(0x06DC, 0x02F4, 4, 0x0000, 0, 0), MX6Q_PAD_SD4_CMD__GPIO_7_9 = IOMUX_PAD(0x06DC, 0x02F4, 5, 0x0000, 0, 0), MX6Q_PAD_SD4_CMD__TPSMP_HDATA_DIR = IOMUX_PAD(0x06DC, 0x02F4, 7, 0x0000, 0, 0), MX6Q_PAD_SD4_CLK__USDHC4_CLK = IOMUX_PAD(0x06E0, 0x02F8, 0, 0x0000, 0, 0), MX6Q_PAD_SD4_CLK__RAWNAND_WRN = IOMUX_PAD(0x06E0, 0x02F8, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_CLK__UART3_TXD = IOMUX_PAD(0x06E0, 0x02F8, 2, 0x0000, 0, 0), MX6Q_PAD_SD4_CLK__UART3_RXD = IOMUX_PAD(0x06E0, 0x02F8, 2, 0x0930, 3, 0), MX6Q_PAD_SD4_CLK__PCIE_CTRL_MUX_6 = IOMUX_PAD(0x06E0, 0x02F8, 4, 0x0000, 0, 0), MX6Q_PAD_SD4_CLK__GPIO_7_10 = IOMUX_PAD(0x06E0, 0x02F8, 5, 0x0000, 0, 0), @@ -1578,7 +1567,6 @@ enum { MX6Q_PAD_SD4_DAT3__IPU2_IPU_DIAG_BUS_11 = IOMUX_PAD(0x0710, 0x0328, 7, 0x0000, 0, 0), MX6Q_PAD_SD4_DAT4__RAWNAND_D12 = IOMUX_PAD(0x0714, 0x032C, 0, 0x0000, 0, 0), MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 = IOMUX_PAD(0x0714, 0x032C, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT4__UART2_TXD = IOMUX_PAD(0x0714, 0x032C, 2, 0x0000, 0, 0), MX6Q_PAD_SD4_DAT4__UART2_RXD = IOMUX_PAD(0x0714, 0x032C, 2, 0x0928, 6, 0), MX6Q_PAD_SD4_DAT4__USBOH3_UH2_DFD_OUT28 = IOMUX_PAD(0x0714, 0x032C, 3, 0x0000, 0, 0), MX6Q_PAD_SD4_DAT4__USBOH3_UH3_DFD_OUT28 = IOMUX_PAD(0x0714, 0x032C, 4, 0x0000, 0, 0), @@ -1605,7 +1593,7 @@ enum { MX6Q_PAD_SD4_DAT7__RAWNAND_D15 = IOMUX_PAD(0x0720, 0x0338, 0, 0x0000, 0, 0), MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 = IOMUX_PAD(0x0720, 0x0338, 1, 0x0000, 0, 0), MX6Q_PAD_SD4_DAT7__UART2_TXD = IOMUX_PAD(0x0720, 0x0338, 2, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT7__UART2_RXD = IOMUX_PAD(0x0720, 0x0338, 2, 0x0928, 7, 0), + MX6Q_PAD_SD4_DAT7__UART2_TXD_RXD = IOMUX_PAD(0x0720, 0x0338, 2, 0x0928, 7, 0), MX6Q_PAD_SD4_DAT7__USBOH3_UH2_DFD_OUT31 = IOMUX_PAD(0x0720, 0x0338, 3, 0x0000, 0, 0), MX6Q_PAD_SD4_DAT7__USBOH3_UH3_DFD_OUT31 = IOMUX_PAD(0x0720, 0x0338, 4, 0x0000, 0, 0), MX6Q_PAD_SD4_DAT7__GPIO_2_15 = IOMUX_PAD(0x0720, 0x0338, 5, 0x0000, 0, 0), -- 1.7.0.4

3 7

[U-Boot] [PATCH 1/3] imximage: Add MX53 to the documentation
by Dirk Behme 17 Jan '12

17 Jan '12

i.MX53 is supported, too. Add this to the introduction of the documentation. Signed-off-by: Dirk Behme <dirk.behme(a)de.bosch.com> CC: Fabio Estevam <festevam(a)gmail.com> CC: Stefano Babic <sbabic(a)denx.de> CC: Jason Liu <jason.hui(a)linaro.org> --- doc/README.imximage | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/doc/README.imximage b/doc/README.imximage index c74239d..c3704a4 100644 --- a/doc/README.imximage +++ b/doc/README.imximage @@ -3,7 +3,7 @@ Imximage Boot Image generation using mkimage --------------------------------------------- This document describes how to set up a U-Boot image -that can be booted by Freescale MX25, MX35 and MX51 +that can be booted by Freescale MX25, MX35, MX51 and MX53 processors via internal boot mode. These processors can boot directly from NAND, SPI flash and SD card flash -- 1.7.0.4

3 10