August 2011 - U-Boot

[U-Boot] __fsl_ddr_set_lawbar: ERROR (ctrl #0, intrlv=0)
by Wolfgang Denk 24 Aug '11

24 Aug '11

Dear Kumar, I'm seeing the following problem on a MPC8555 board: Power-on reset works fine: ... I2C: ready DRAM: 256 MiB (DDR1, 64-bit, CL=2, ECC off) Flash: 64 MiB L2: 256 KB enabled ... But a soft-reset results in this: => reset ... I2C: ready DRAM: __fsl_ddr_set_lawbar: ERROR (ctrl #0, intrlv=0) 256 MiB (DDR1, 64-bit, CL=2, ECC off) Flash: 64 MiB L2: 256 KB already enabled ... Do you have any idea what this means and how to fix it? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de In general, if you think something isn't in Perl, try it out, because it usually is :-) - Larry Wall in <1991Jul31.174523.9447(a)netlabs.com>

2 8

[U-Boot] [u-boot][PATCH] tftp: Remove command repetition.
by Marek Belisko 24 Aug '11

24 Aug '11

Lot of commands in u-boot have repeat command flag but not all are very usefull. Remove this flag for tftp to avoid repeated file download when user press enter. Signed-off-by: Marek Belisko <marek.belisko(a)open-nandra.com> --- common/cmd_net.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/common/cmd_net.c b/common/cmd_net.c index 973fa21..522b435 100644 --- a/common/cmd_net.c +++ b/common/cmd_net.c @@ -47,7 +47,7 @@ int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } U_BOOT_CMD( - tftpboot, 3, 1, do_tftpb, + tftpboot, 3, 0, do_tftpb, "boot image via network using TFTP protocol", "[loadAddress] [[hostIPaddr:]bootfilename]" ); -- 1.7.4.1

2 1

[U-Boot] [PATCH] arm: tegra2: fix out-of-tree build
by Che-Liang Chiou 24 Aug '11

24 Aug '11

The out-of-tree build fails because the Makefiles in question depend on source files of another directory but do not explicitly mkdir that directory. As a matter of fact, other Makefiles under board/*/ directory that refer to source files under another directory explicitly call mkdir. This patch adds explicit mkdir's to the Makefiles in question, and verifies that out-of-tree build is working. Signed-off-by: Che-Liang Chiou <clchiou(a)chromium.org> Cc: Albert Aribaud <albert.u.boot(a)aribaud.net> --- board/nvidia/harmony/Makefile | 4 ++++ board/nvidia/seaboard/Makefile | 4 ++++ 2 files changed, 8 insertions(+), 0 deletions(-) diff --git a/board/nvidia/harmony/Makefile b/board/nvidia/harmony/Makefile index 9fb6b57..ebd8e02 100644 --- a/board/nvidia/harmony/Makefile +++ b/board/nvidia/harmony/Makefile @@ -24,6 +24,10 @@ include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif + LIB = $(obj)lib$(BOARD).o COBJS := $(BOARD).o diff --git a/board/nvidia/seaboard/Makefile b/board/nvidia/seaboard/Makefile index 9fb6b57..ebd8e02 100644 --- a/board/nvidia/seaboard/Makefile +++ b/board/nvidia/seaboard/Makefile @@ -24,6 +24,10 @@ include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif + LIB = $(obj)lib$(BOARD).o COBJS := $(BOARD).o -- 1.7.3.1

3 3

[U-Boot] [PATCH v4 00/13] Add PXE support
by Jason Hobbs 24 Aug '11

24 Aug '11

This patch series adds PXE booting support to U-boot. It adds aseries of DHCP options to allow U-boot DHCP requests to be compliant with RFC 4578, and a set of commands to provide PXELINUX like behavior. The pxe commands provide a near subset of the functionality provided by the PXELINUX boot loader. This allows U-boot based systems to be controlled remotely using the same PXE based techniques that many non U-boot based servers use. As an example, support for the pxe commands is enabled for the ca9x4_ct_vxp config. Additional details for the pxe commands are available in the README.pxe file added as part of this patch series. This patch series adds support for RFC 4578 compliant DHCP request options, which enhance the ability of DHCP servers to respond differently to different clients. As an example, the last patch in this series enables support for the PXE DHCP options for the ca9x4_ct_vxp config. v4 of the patch series combines the previously separate DHCP options patches with the pxe options. It also renames the pxe commands to 'pxe' from 'pxecfg', and includes various other improvements and bug fixes. Special thanks to the Linaro and Ubuntu folks who tested the patches and sent me bug reports and fixes. Jason Hobbs (13): Add generic, reusable menu code common, menu: use abortboot for menu timeout common: add run_command2 for running simple or hush commands Add isblank cosmetic: remove unneeded curly braces Replace space and tab checks with isblank Add standard environment variables README lib: add uuid_str_to_bin for use with bootp and PXE uuid Add pxe command net: bootp: add PXE/RFC 4578 DHCP options support Convert ca9x4_ct_vxp to standard env variables arm: ca9x4_ct_vxp: enable pxe command support arm: ca9x4_ct_vxp: enable PXE BOOTP options support board/hymod/env.c | 9 +- common/Makefile | 2 + common/cmd_pxe.c | 1349 ++++++++++++++++++++++++++++++++++ common/command.c | 9 +- common/hush.c | 2 +- common/main.c | 69 +- common/menu.c | 417 +++++++++++ doc/README.menu | 119 +++ doc/README.pxe | 240 ++++++ doc/README.standard-env | 92 +++ drivers/bios_emulator/x86emu/debug.c | 7 +- examples/standalone/smc911x_eeprom.c | 5 +- include/common.h | 13 + include/configs/ca9x4_ct_vxp.h | 19 +- include/hush.h | 2 +- include/linux/ctype.h | 6 + include/menu.h | 30 + lib/Makefile | 1 + lib/hashtable.c | 4 +- lib/uuid.c | 85 +++ net/bootp.c | 40 + 21 files changed, 2463 insertions(+), 57 deletions(-) create mode 100644 common/cmd_pxe.c create mode 100644 common/menu.c create mode 100644 doc/README.menu create mode 100644 doc/README.pxe create mode 100644 doc/README.standard-env create mode 100644 include/menu.h create mode 100644 lib/uuid.c

2 20

[U-Boot] [PATCH v2 3/3] Armada100: Enable 88E3015 PHY support for GplugD
by Ajay Bhargav 24 Aug '11

24 Aug '11

This patch adds support for 88E3015 PHY for Marvell GplugD board. This patch depends on series of patch which adds support for Marvell GuruPlug-Display. Signed-off-by: Ajay Bhargav <ajay.bhargav(a)einfochips.com> --- Changes for v2: - Not changed board/Marvell/gplugd/gplugd.c | 33 ++++++++++++++++++++++++++++++++- include/configs/gplugd.h | 14 ++++++++++++++ 2 files changed, 46 insertions(+), 1 deletions(-) diff --git a/board/Marvell/gplugd/gplugd.c b/board/Marvell/gplugd/gplugd.c index 4cd4086..bf3cdb4 100644 --- a/board/Marvell/gplugd/gplugd.c +++ b/board/Marvell/gplugd/gplugd.c @@ -32,6 +32,8 @@ #include <mvmfp.h> #include <asm/arch/mfp.h> #include <asm/arch/armada100.h> +#include <asm/gpio.h> +#include <miiphy.h> #ifdef CONFIG_ARMADA100_FEC #include <net.h> @@ -83,6 +85,11 @@ int board_init(void) gd->bd->bi_arch_number = MACH_TYPE_SHEEVAD; /* adress of boot parameters */ gd->bd->bi_boot_params = armd1_sdram_base(0) + 0x100; + /* Assert PHY_RST# */ + gpio_direction_output(CONFIG_SYS_GPIO_PHY_RST, GPIO_LOW); + udelay(10); + /* Deassert PHY_RST# */ + gpio_set_value(CONFIG_SYS_GPIO_PHY_RST, GPIO_HIGH); return 0; } @@ -97,5 +104,29 @@ int board_eth_init(bd_t *bis) return armada100_fec_register(); } -#endif /* CONFIG_ARMADA100_FEC */ +#ifdef CONFIG_RESET_PHY_R +/* Configure and initialize PHY chip 88E3015 */ +void reset_phy(void) +{ + u16 phy_adr; + const char *name = "armd-fec0"; + + if (miiphy_set_current_dev(name)) + return; + + /* command to read PHY dev address */ + if (miiphy_read(name, 0xff, 0xff, (u16 *) &phy_adr)) { + printf("Err..%s could not read PHY dev address\n", __func__); + return; + } + /* Set Ethernet LED in TX blink mode */ + miiphy_write(name, phy_adr, PHY_LED_MAN_REG, 0x00); + miiphy_write(name, phy_adr, PHY_LED_PAR_SEL_REG, PHY_LED_VAL); + + /* reset the phy */ + miiphy_reset(name, phy_adr); + printf("88E3015 Initialized on %s\n", name); +} +#endif /* CONFIG_RESET_PHY_R */ +#endif /* CONFIG_ARMADA100_FEC */ diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h index f3b94d8..b63ffd5 100644 --- a/include/configs/gplugd.h +++ b/include/configs/gplugd.h @@ -80,6 +80,20 @@ #define CONFIG_ROOTPATH "/tftpboot" #define CONFIG_SYS_IMG_NAME "uImage" +/* GPIO Support */ +#define CONFIG_MARVELL_GPIO + +/* PHY configuration */ +#define CONFIG_MII +#define CONFIG_CMD_MII +#define CONFIG_RESET_PHY_R +/* 88E3015 register definition */ +#define PHY_LED_PAR_SEL_REG 22 +#define PHY_LED_MAN_REG 25 +#define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */ +/* GPIO Configuration for PHY */ +#define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */ + /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros -- 1.7.0.4

2 1

[U-Boot] FDT without FIT?
by Simon Schwarz 24 Aug '11

24 Aug '11

Hi list, I'am a bit stuck here. How can FDT be used without a FIT image? I can't really get this from the code - if someone can point me in the right direction this would be great! Thanks! Simon

2 3

[U-Boot] bitte lesen und antworten Sie mir dringend <Miss Nicole> ..Reply to me urgently <Miss Nicole >
by Nicole Nicole 24 Aug '11

24 Aug '11

Liebste, wie war dein Tag, ich hoffe, alles gut bei dir? Ich entschied mich für Sie, weil meine derzeitige Situation wenden, ich bin in einer privaten Hilfsorganisation Aufenthalt unter St Johns Church hier in Ouagadougou in Burkina-Faso und ich bete, dass Gott das Herz berühren, zu verstehen und gib mir deine helfende Hand Ich bin Miss, Nicole Moses Akumi, und ich bin ein Mädchen von 24 Jahre alt, ein Medizinstudent, mein Vater seligen Angedenkens nach Name verstorbenen Herrn Moses Akumi, die ein Manager mit CNPC Ölgesellschaft wurde an der Khartoum-Raffinerie in Sudan, wurde an der Seite mit meiner geliebten Mutter und unsere Familie Haus von den Rebellen während der letzten Krise in meinem Land verbrannt getötet Ich bin jetzt schreibe Ihnen aus Ouagadougou Burkina-Faso, wo ich durch Straße entkommen, und jetzt um Asyl in einem privaten Hilfsorganisation unter St Johns Church hier in Ouagadougou in Burkina-Faso, können Sie mehr von meiner Geschichte über folgende Seite im Netz zu finden BBC News http://news.bbc.co.uk/2/hi/africa/6469857.stm so bin ich jetzt auf der Suche nach einem ehrlichen und zuverlässigen Person, die Hilfe für mich in keinem der westlichen Welt zu verlagern nach einem besseren Leben und mein Studium fortsetzen wird, habe ich mich entschlossen, Sie, nachdem sie durch Ihr Profil Kontakt und ich glaube, Sie sind eine zuverlässige Person, die nicht im Stich lässt mich oder mein Vertrauen verraten Ich weiß, Sie fragen sich vielleicht, warum ich so bald erzählen Sie über all das, auch ohne zu sehen oder zu wissen Sie ganz genau, wirklich etwas in mir sagt mir, dass du ein guter Mensch sind und ich denke, ich bin nicht falsch kurz will ich gerne etwas mehr über mich dir offenbaren und sehen, wenn Sie dazu beitragen können, um Ihr Land zu verlagern, um so mit meinem Studium fortsetzen und ein neues Leben, und bitte dies ist ein wenig abzusondern und flehe ich Sie zu halten es sich selbst allein, bis alles richtig angeordnet und ausgeführt wird, dann werde ich kommen, um Sie in Ihrem Land beitreten Ich habe die Summe von 5,2 Millionen Dollar als Erbe von meinem verstorbenen Vater, die Ich mag, um in Ihrem Land mit Ihrer Hilfe zu investieren wird, ist der Grund, warum ich brauche deine Hilfe auf Anweisung meines verstorbenen Vaters an die Bank gab in den Fonds-Release mir im Alter von 24 durch einen Ausländer, der mir helfen kann, den Fonds klug investieren, und es hat mein Vater den Wunsch für mich, einen Ausländer zu heiraten, so wird die Bank nicht freigeben der Fonds für mich ohne die Hilfe eines Ausländers wie mein Vater wies die Bank Dieser Fonds ist in meinem verstorbenen Vater das Bankkonto mit einer der Banken hier in Burkina-Faso hinterlegt und ich werde Ihnen alle Details / Kontakt, weil ich das Geld auf Ihr Konto überwiesen werden, bevor ich zu Ihnen kommen kommen wollen in Ihrem Land, ich will dich mit 15% des gesamten Fonds zu kompensieren, und Sie können mir auch helfen, um meinen eigenen Teil in jedem guten Geschäft zu investieren, möchte ich mein Studium beenden, weil ich Arzt werden, so dass ich positiv beitragen können wollen die Menschheit, i Ihre dringende Antwort auf Ihre Fähigkeit, das für mich verarbeiten, so dass i wird Ihnen sagen, den nächsten Schritt brauchen, weil ich zu diesem Flüchtlingslager so schnell wie möglich verlassen wollen, ist das Leben hier, um mir eine Hölle gibt, keine Liebe, keine Zuneigung und keine Annehmlichkeiten, was noch wichtiger ist, ich meine Studien Liebe und hier nichts los ist und die Menschen hier sind nicht freundlich, ich bin wirklich Leid an diesem Ort, es ist zu schmerzhaft, aber ich hoffe, mit Ihrer Hilfe, um die Übertragung der Fonds in Ihrem Konto , werde ich ein besseres Leben zu leben so freundlich mir Ihre Bereitschaft, mir zu helfen und ich verspreche, immer nett sein und dir treu, ich will gerne mit 15% des gesamten Fonds für die Hilfe zu kompensieren, und Sie können mir auch helfen, den Fonds zu investieren, während Ich setze meine Studien, weil ich Arzt werden wollen, ist es mein Wunsch, einen positiven Beitrag für die Menschheit Ich schicke Ihnen mein Foto und ich hoffe, Ihnen und Ihrer Telefonnummer, damit wir per Telefon sprechen kann und ich werde auch gerne deine Stimme zu hören Vielen Dank und Gott segne Sie Mit freundlichen Grüßen, Nicole .............. dearest, how was your day, i hope everything is well with you? i decided to contact you because of my present situation, i am staying in a private charity organization under St Johns Church here in Ouagadougou Burkina-Faso and i pray that God will touch your heart to understand and give me your helping hand i am miss, Nicole Moses Akumi, and i am a girl of 24 years old, a medical student, my father of blessed memory by name late Mr. Moses Akumi who was the a manager with CNPC oil company at the Khartoum refinery in Sudan, was killed along side with my beloved mother and our family house burnt down by the rebels during the last crisis in my country i am now writing you from Ouagadougou Burkina-Faso where i escaped through road, and now seeking asylum in a private charity organization under St Johns Church here in Ouagadougou Burkina-Faso, you can find more of my story through the following site on the net bbc news http://news.bbc.co.uk/2/hi/africa/6469857.stm so i am now in search of an honest and reliable person who will help to relocate me in any of the western world for a better life and to continue my studies, i have chosen to contact you after going through your profile and i believe you are a reliable person who will not let me down or betray my trust i know you may wonder why i am so soon telling you about all this, even without seeing or knowing you fully well, really something in me tells me that you are a good person and i guess i am not wrong briefly i will like to disclose little more about myself to you and see if you can help to relocate to your country so as to continue with my studies and have a new life, and please this is a little secrete and i plead with you to keep it to yourself alone until everything is properly arranged and executed, then i will come over to join you in your country i have the sum of $5.2 Million as an inheritance from my late father which i will like to invest in your country with your help, the reason why i need your help is based on the instruction my late father gave to the bank to release the fund to me at the age of 24 through a foreigner who can help me to invest the fund wisely, and it has been my father's desire for me to marry a foreigner, so the bank will not release the fund to me without the help of a foreigner as my father instructed the bank this fund is deposited in my late father's bank account with one of the banks here in Burkina-Faso and i am going to give you all the details / contact because i want the money to be transferred to your account before i come over to join you in your country, I will compensate you with 15% of the total fund and you can also help me to invest my own part into any good business, I want to finish my studies because I want to be a doctor so that I can contribute positively to humanity, i need your urgent answer of your ability to handle this for me so that i will tell you the next step because i want to leave this refugee camp as soon as possible, life here is to me a hell, no love, no affection and no amenities, more importantly, i love my studies and here nothing is happening and people here are not friendly, i am really suffering in this place, it is too painful, but i hope with your help to transferring the fund in your account, i will have a better life to live so kindly let me know your readiness to help me and i promise to always be nice and faithful to you, I will glad to compensate you with 15% of the total fund for helping me, and you can also help me to invest the fund while I continue my studies because I want to be a doctor, it is my desire to contribute positively to humanity i will send you my photo and i hope to have yours and your phone number so that we can talk through phone and i will also like to hear your voice thank you and God bless you sincerely yours, Nicole

1 0

Re: [U-Boot] [PATCH 2/2] mx3fb: move to CONFIG_VIDEO to support videomodes
by Helmut Raiger 24 Aug '11

24 Aug '11

Please ignore the 2 messages sent at 8:30, obviously the save and send buttons changed position. Helmut -- Scanned by MailScanner.

1 0

[U-Boot] [PATCH 7/9] DM9000:Add a byte swap macro for dm9000 io operation.
by Jason Jin 24 Aug '11

24 Aug '11

commit a45dde2293c816138e53c26eca6fd0322583f9a6 changed the dm9000 direct register access to standard IO. This should work on the ColdFire platform as there are corresponding macros for the LE devices. But the hardware settings on some ColdFire boards had swapped the byte order which make the original macros such as out_le16 cannot work. To avoid changing the common io access code on ColdFire platform, the DM9000_BYTE_SWAPPED define was added to make the dm9000 use __raw* IO access on some ColdFire boards. Signed-off-by: Jason Jin <Jason.jin(a)freescale.com> --- Changes for V2: Remove the 'volatile' in the macro. Changes for V3: Seperate the dm9000 code support and the platform code to two patches so that it can be accepted by different custodian. Resend: Add Ben Warren drivers/net/dm9000x.c | 10 +++++++++- 1 files changed, 9 insertions(+), 1 deletions(-) diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c index b5c5573..05cd8eb 100644 --- a/drivers/net/dm9000x.c +++ b/drivers/net/dm9000x.c @@ -116,13 +116,21 @@ static u8 DM9000_ior(int); static void DM9000_iow(int reg, u8 value); /* DM9000 network board routine ---------------------------- */ - +#ifndef DM9000_BYTE_SWAPPED #define DM9000_outb(d,r) writeb(d, (volatile u8 *)(r)) #define DM9000_outw(d,r) writew(d, (volatile u16 *)(r)) #define DM9000_outl(d,r) writel(d, (volatile u32 *)(r)) #define DM9000_inb(r) readb((volatile u8 *)(r)) #define DM9000_inw(r) readw((volatile u16 *)(r)) #define DM9000_inl(r) readl((volatile u32 *)(r)) +#else +#define DM9000_outb(d, r) __raw_writeb(d, r) +#define DM9000_outw(d, r) __raw_writew(d, r) +#define DM9000_outl(d, r) __raw_writel(d, r) +#define DM9000_inb(r) __raw_readb(r) +#define DM9000_inw(r) __raw_readw(r) +#define DM9000_inl(r) __raw_readl(r) +#endif #ifdef CONFIG_DM9000_DEBUG static void -- 1.6.4

3 2

[U-Boot] Hello My Dearest
by Anna Moses 24 Aug '11

24 Aug '11

Hello My Dearest Compliment of the season to you. I know that this letter will come to you as a surprise, with the full hope that you will bear with me to assist me. I am Mrs. Anna Moses from Sierra Leon but presently residing in Cote D’Ivoire. I am a widow with one son being that I lost my husband. My husband was official personnel with the Gold and Mining board in our country Sierra Leone until his death. He was assassinated by the rebels following the political uprising. Before his death he made a deposit of sum of Six Million Two Hundred Thousand Dollars ($6,200,000.00) here in Cote D’Ivoire. This fund he intended to use for foreign investment. I want you to help me as I have plans to do investment in your country, like real estate or any other. This is my reason for writing to you. I shall give you 25% of the total sum as soon as this fund hits your account and I shall visit you in your country for the shearing. Please if you are willing to assist me and my only son Joseph, please indicate your interest by replying soonest. Thanks and best regards. Mrs. Anna W. Moses and Son Joseph

1 0