June 2011 - U-Boot

[U-Boot] [RFC 0/3][v4] mmc inizialization steps enhanced
by Raffaele Recalcati 17 Aug '11

17 Aug '11

I have added some better inizializations and status check. I have created following patchset for Davinci dm365 against git://arago-project.org/git/projects/u-boot-davinci.git git tree. There are two commits more in that tree, but they are not in conflict with my work. I have finally tested this series on basi board, based on Davinci dm365, that contains an eMMC device. Raffaele Recalcati (3): mmc: checking status after commands with R1b response mmc: SEND_OP_COND considers card capabilities (voltage) mmc: trace added drivers/mmc/mmc.c | 136 +++++++++++++++++++++++++++++++++++++++++++++++++++-- include/mmc.h | 6 ++ 2 files changed, 137 insertions(+), 5 deletions(-)

5 11

[U-Boot] [PATCH] env: allow people to force envcrc building
by Mike Frysinger 14 Aug '11

14 Aug '11

For people who want to manually extract the embedded environment so that it can be manually packed into the final u-boot image, add a config opt to force building of the envcrc tool. Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- README | 5 +++++ common/env_embedded.c | 2 +- include/common.h | 5 +++++ tools/Makefile | 1 + tools/envcrc.c | 10 +++++++--- 5 files changed, 19 insertions(+), 4 deletions(-) diff --git a/README b/README index beb1cbb..c517204 100644 --- a/README +++ b/README @@ -2447,6 +2447,11 @@ The following definitions that deal with the placement and management of environment data (variable area); in general, we support the following configurations: +- CONFIG_BUILD_ENVCRC: + + Builds up envcrc with the target environment so that external utils + may easily extract it and embed it in final U-Boot images. + - CONFIG_ENV_IS_IN_FLASH: Define this if the environment is in flash memory. diff --git a/common/env_embedded.c b/common/env_embedded.c index ae6cac4..e438575 100644 --- a/common/env_embedded.c +++ b/common/env_embedded.c @@ -44,7 +44,7 @@ * Generate embedded environment table * inside U-Boot image, if needed. */ -#if defined(ENV_IS_EMBEDDED) +#if defined(ENV_IS_EMBEDDED) || defined(CONFIG_BUILD_ENVCRC) /* * Only put the environment in it's own section when we are building * U-Boot proper. The host based program "tools/envcrc" does not need diff --git a/include/common.h b/include/common.h index 21c05db..9253cd1 100644 --- a/include/common.h +++ b/include/common.h @@ -756,4 +756,9 @@ int cpu_release(int nr, int argc, char * const argv[]); #define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1) #define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask)) +/* Pull in stuff for the build system */ +#ifdef DO_DEPS_ONLY +# include <environment.h> +#endif + #endif /* __COMMON_H_ */ diff --git a/tools/Makefile b/tools/Makefile index 623f908..5784f51 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -51,6 +51,7 @@ endif # Generated executable files BIN_FILES-$(CONFIG_LCD_LOGO) += bmp_logo$(SFX) BIN_FILES-$(CONFIG_VIDEO_LOGO) += bmp_logo$(SFX) +BIN_FILES-$(CONFIG_BUILD_ENVCRC) += envcrc$(SFX) BIN_FILES-$(CONFIG_ENV_IS_EMBEDDED) += envcrc$(SFX) BIN_FILES-$(CONFIG_ENV_IS_IN_DATAFLASH) += envcrc$(SFX) BIN_FILES-$(CONFIG_ENV_IS_IN_EEPROM) += envcrc$(SFX) diff --git a/tools/envcrc.c b/tools/envcrc.c index c8c50d7..feebbab 100644 --- a/tools/envcrc.c +++ b/tools/envcrc.c @@ -60,6 +60,10 @@ # endif #endif /* CONFIG_ENV_IS_IN_FLASH */ +#if defined(ENV_IS_EMBEDDED) && !defined(CONFIG_BUILD_ENVCRC) +# define CONFIG_BUILD_ENVCRC 1 +#endif + #ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT # define ENV_HEADER_SIZE (sizeof(uint32_t) + 1) #else @@ -71,14 +75,14 @@ extern uint32_t crc32 (uint32_t, const unsigned char *, unsigned int); -#ifdef ENV_IS_EMBEDDED +#ifdef CONFIG_BUILD_ENVCRC extern unsigned int env_size; extern unsigned char environment; -#endif /* ENV_IS_EMBEDDED */ +#endif /* CONFIG_BUILD_ENVCRC */ int main (int argc, char **argv) { -#ifdef ENV_IS_EMBEDDED +#ifdef CONFIG_BUILD_ENVCRC unsigned char pad = 0x00; uint32_t crc; unsigned char *envptr = &environment, -- 1.7.5.rc1

2 6

[U-Boot] {Spam?} skip relocation
by Marcel 14 Aug '11

14 Aug '11

Hi, In my previous working version of U-boot I used CONFIG_SKIP_RELOCATION but this doesn't seem to work any more. Any reason why it doesn't work any more ? Is there another way to skip relocation ? regards, Marcel

4 16

Re: [U-Boot] [PATCH 2/2] beagleboard: enable HUB power on XM boards
by Christian Spielberger 13 Aug '11

13 Aug '11

Hello Eric, we have both, a beagle xM-B and a beagle xM-C. The following works on both boards and is different from your patch. It is not possible to differentiate between Rev xM-A and xM-B. Anyway, the only difference is in the processors silicon revision (ES 1.0 to ES 1.1). regards, chris. --- @@ -299,7 +309,15 @@ int misc_init_r(void) setenv(expansion_config.env_var, expansion_config.env_setting); twl4030_power_init(); - twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON); + switch (get_board_revision()) { + case REVISION_XM_C: + case REVISION_C4: + twl4030_led_init( TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON ); + break; + default: + twl4030_led_init( TWL4030_LED_LEDEN_LEDBON ); + break; + } /* Configure GPIOs to output */ writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);

3 3

[U-Boot] [PATCH 0/2] arm: cleanup board code
by Heiko Schocher 12 Aug '11

12 Aug '11

fix Coding Style for arch/arm/lib/board.c use gd->ram_size instead of bd->bi_memsize Heiko Schocher (2): arm, lib/board.c: Coding Style cleanup arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize arch/arm/lib/board.c | 218 ++++++++++++++++++++++++++------------------------ 1 files changed, 113 insertions(+), 105 deletions(-) -- 1.7.4.4

5 14

[U-Boot] [PATCH] arm: lib: memcpy: Do not copy to same address
by Matthias Weisser 12 Aug '11

12 Aug '11

In some cases (e.g. bootm with a elf payload which is already at the right position) there is a in place copy of data to the same address. Catching this saves some ms while booting. Signed-off-by: Matthias Weisser <weisserm(a)arcor.de> --- arch/arm/lib/memcpy.S | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S index 3b5aeec..f655256 100644 --- a/arch/arm/lib/memcpy.S +++ b/arch/arm/lib/memcpy.S @@ -60,6 +60,9 @@ .globl memcpy memcpy: + cmp r0, r1 + moveq pc, lr + enter r4, lr subs r2, r2, #4 -- 1.7.0.4

4 7

[U-Boot] OpenRD Ultimate SATA & SD
by Philip Hands 10 Aug '11

10 Aug '11

Hi, I've been trying to get a version of u-boot for OpenRD Ultimate that is willing to boot from all of NAND, USB, SD and SATA, and find that SD & SATA is still not possible with -rc1 as packaged for Debian (and it seems that nothing in the subsequent work in the master git would help, but if people tell me that it does, I'll give that a try). SATA throws an error in ide_preinit in drivers/block/mvsata_ide.c, and having looked into it, the second call to mvsata_ide_initialize_port is what fails. This is with a SATA drive plugged into the on-board SATA port, and with nothing plugged into the eSATA port. If I #undef CONFIG_SYS_ATA_IDE1_OFFSET in include/configs/openrd.h then the second mvsata_ide_initialize_port call is disabled, and I can then boot from SATA, but I've not got an eSATA drive to test whether it would have worked if I had one plugged in. I note that there is still something a little odd going on, since the drive seems to get detected twice: Marvell>> ide reset Reset IDE: Bus 0: OK Bus 1: OK Device 0: Model: HITACHI HTS723216L9SA60 Firm: FC2ZC50B Ser#: 091005FC1220NCHXGPLG Type: Hard Disk Supports 48-bit addressing Capacity: 152627.8 MB = 149.0 GB (312581808 x 512) Device 1: Model: HITACHI HTS723216L9SA60 Firm: FC2ZC50B Ser#: 091005FC1220NCHXGPLG Type: Hard Disk Supports 48-bit addressing Capacity: 152627.8 MB = 149.0 GB (312581808 x 512) but it seems to work OK anyway. As for the SD -- it detects OK, but seems to be unable to read more than a small amount of data from the SD card, as seen here: Marvell>> mmc init SDHC found. Card desciption is: Manufacturer: 0x1e, OEM "AB" Product name: "USD ", revision 1.0 Serial number: 93331321 Manufacturing date: 8/2010 CRC: 0x00, b0 = 0 mmc1 is available Marvell>> ext2ls mmc 0 <DIR> 1024 . <DIR> 1024 .. <DIR> 12288 lost+found 1433576 vmlinuz-2.6.32-5-kir at which point it hangs. If I take the same SD card, put it in an SD-to-USB adaptor and then access it via the USB, I can boot the kernel, whereas it just locks up when accessed as an SD, which also seems to point at it not being able to do more than a small read via SD. Any suggestions on how to diagnose what's going on here would be most welcome. I've tried pointing gdb at it, but it seems not to be doing breakpoints as I'd expect, so hints on how to get gdb working as well would be helpful (yes, I am rather new to this :-) Cheers, Phil. -- |)| Philip Hands [+44 (0)20 8530 9560] http://www.hands.com/ |-| HANDS.COM Ltd. http://www.uk.debian.org/ |(| 10 Onslow Gardens, South Woodford, London E18 1NE ENGLAND

4 10

[U-Boot] [0/5]devkit8000 nand_spl support
by simonschwarzcor＠googlemail.com 09 Aug '11

09 Aug '11

This RFC-patch adds nand_spl support to devkit8000(OMAP3). This is a quick adaption to the nand_spl structure - it is not very consistent because it was initaly written for the spl-structure defined by Aneesh in his OMAP4 SPL patches. I will switch to the new SPL structure as soon as there is a consensus found.

7 130

[U-Boot] [PATCH][NEXT] hwmon: do not init sensors on startup
by Heiko Schocher 04 Aug '11

04 Aug '11

The U-Boot Design Principles[1] clearly say: Initialize devices only when they are needed within U-Boot, i.e. don't initialize the Ethernet interface(s) unless U-Boot performs a download over Ethernet; don't initialize any IDE or USB devices unless U-Boot actually tries to load files from these, etc. (and don't forget to shut down these devices after using them - otherwise nasty things may happen when you try to boot your OS). So, do not initialize and read the sensors on startup. Signed-off-by: Heiko Schocher <hs(a)denx.de> --- arch/powerpc/lib/board.c | 3 --- common/cmd_dtt.c | 14 ++++++++++++-- drivers/hwmon/adm1021.c | 27 +++------------------------ drivers/hwmon/adt7460.c | 2 +- drivers/hwmon/ds1621.c | 19 +------------------ drivers/hwmon/ds1775.c | 19 +------------------ drivers/hwmon/lm63.c | 19 +------------------ drivers/hwmon/lm73.c | 20 ++------------------ drivers/hwmon/lm75.c | 29 ++--------------------------- drivers/hwmon/lm81.c | 21 ++------------------- include/dtt.h | 2 +- 11 files changed, 26 insertions(+), 149 deletions(-) diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index b21c1d6..f9412a9 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -917,9 +917,6 @@ void board_init_r (gd_t *id, ulong dest_addr) WATCHDOG_RESET (); -#if defined(CONFIG_DTT) /* Digital Thermometers and Thermostats */ - dtt_init (); -#endif #if defined(CONFIG_CMD_SCSI) WATCHDOG_RESET (); puts ("SCSI: "); diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c index 3388e43..37ce4df 100644 --- a/common/cmd_dtt.c +++ b/common/cmd_dtt.c @@ -28,6 +28,8 @@ #include <dtt.h> #include <i2c.h> +static unsigned long sensors_init_done = 0; + int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { int i; @@ -42,8 +44,16 @@ int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) * Loop through sensors, read * temperature, and output it. */ - for (i = 0; i < sizeof (sensors); i++) - printf ("DTT%d: %i C\n", i + 1, dtt_get_temp (sensors[i])); + for (i = 0; i < sizeof (sensors); i++) { + if ((sensors_init_done & (1 << i)) != (1 << i)) { + if (dtt_init_one(sensors[i]) == 0) + sensors_init_done |= (1 << i); + else + printf("DTT%d: Failed init!\n", i); + } + if ((sensors_init_done & (1 << i)) == (1 << i)) + printf ("DTT%d: %i C\n", i + 1, dtt_get_temp(sensors[i])); + } /* switch back to original I2C bus */ I2C_SET_BUS(old_bus); diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index d753e9a..3ef80af 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -109,8 +109,8 @@ dtt_write (int sensor, int reg, int val) return 0; } /* dtt_write() */ -static int -_dtt_init (int sensor) +int +dtt_init_one (int sensor) { dtt_cfg_t *dcp = &dttcfg[sensor >> 1]; int reg, val; @@ -164,28 +164,7 @@ _dtt_init (int sensor) return 1; return 0; -} /* _dtt_init() */ - -int -dtt_init (void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - const char *const header = "DTT: "; - - /* switch to correct I2C bus */ - I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM); - - for (i = 0; i < sizeof(sensors); i++) { - if (_dtt_init(sensors[i]) != 0) - printf ("%s%d FAILED INIT\n", header, i+1); - else - printf ("%s%d is %i C\n", header, i+1, - dtt_get_temp(sensors[i])); - } - - return (0); -} /* dtt_init() */ +} /* dtt_init_one() */ int dtt_get_temp (int sensor) diff --git a/drivers/hwmon/adt7460.c b/drivers/hwmon/adt7460.c index caef70a..b7e36fe 100644 --- a/drivers/hwmon/adt7460.c +++ b/drivers/hwmon/adt7460.c @@ -50,7 +50,7 @@ int dtt_write(int sensor, int reg, int val) return 0; } -int dtt_init(void) +int dtt_init_one(int sensor) { printf("ADT7460 at I2C address 0x%2x\n", ADT7460_ADDRESS); diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index 5a2ea62..4e1db6d 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -126,7 +126,7 @@ int dtt_write(int sensor, int reg, int val) } -static int _dtt_init(int sensor) +int dtt_init_one(int sensor) { int val; @@ -155,23 +155,6 @@ static int _dtt_init(int sensor) return 0; } - -int dtt_init (void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - - for (i = 0; i < sizeof(sensors); i++) { - if (_dtt_init(sensors[i]) != 0) - printf("DTT%d: FAILED\n", i + 1); - else - printf("DTT%d: %i C\n", i + 1, dtt_get_temp(sensors[i])); - } - - return (0); -} - - int dtt_get_temp(int sensor) { int i; diff --git a/drivers/hwmon/ds1775.c b/drivers/hwmon/ds1775.c index 80fb26f..feabdf2 100644 --- a/drivers/hwmon/ds1775.c +++ b/drivers/hwmon/ds1775.c @@ -98,7 +98,7 @@ int dtt_write(int sensor, int reg, int val) } -static int _dtt_init(int sensor) +int dtt_init_one(int sensor) { int val; @@ -133,23 +133,6 @@ static int _dtt_init(int sensor) return 0; } - -int dtt_init (void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - - for (i = 0; i < sizeof(sensors); i++) { - if (_dtt_init(sensors[i]) != 0) - printf("DTT%d: FAILED\n", i+1); - else - printf("DTT%d: %i C\n", i+1, dtt_get_temp(sensors[i])); - } - - return (0); -} - - int dtt_get_temp(int sensor) { return (dtt_read(sensor, DTT_READ_TEMP) / 256); diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c index 03616e1..2e49258 100644 --- a/drivers/hwmon/lm63.c +++ b/drivers/hwmon/lm63.c @@ -93,7 +93,7 @@ int dtt_write(int sensor, int reg, int val) return 0; } /* dtt_write() */ -static int _dtt_init(int sensor) +int dtt_init_one(int sensor) { int i; int val; @@ -155,20 +155,3 @@ int dtt_get_temp(int sensor) /* Ignore LSB for now, U-Boot only prints natural numbers */ return temp >> 8; } - -int dtt_init(void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - const char *const header = "DTT: "; - - for (i = 0; i < sizeof(sensors); i++) { - if (_dtt_init(sensors[i]) != 0) - printf("%s%d FAILED INIT\n", header, i + 1); - else - printf("%s%d is %i C\n", header, i + 1, - dtt_get_temp(sensors[i])); - } - - return 0; -} diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c index 7b5d893..45cc6db 100644 --- a/drivers/hwmon/lm73.c +++ b/drivers/hwmon/lm73.c @@ -112,7 +112,7 @@ int dtt_write(int const sensor, int const reg, int const val) dlen); } /* dtt_write() */ -static int _dtt_init(int const sensor) +int dtt_init_one(int const sensor) { int val; @@ -148,23 +148,7 @@ static int _dtt_init(int const sensor) dtt_read(sensor, DTT_CONTROL); /* clear temperature flags */ return 0; -} /* _dtt_init() */ - -int dtt_init(void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - const char *const header = "DTT: "; - - for (i = 0; i < sizeof(sensors); i++) { - if (0 != _dtt_init(sensors[i])) - printf("%s%d FAILED INIT\n", header, i + 1); - else - printf("%s%d is %i C\n", header, i + 1, - dtt_get_temp(sensors[i])); - } - return 0; -} /* dtt_init() */ +} /* dtt_init_one() */ int dtt_get_temp(int const sensor) { diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index 8119821..29c1a39 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -119,7 +119,7 @@ int dtt_write(int sensor, int reg, int val) } /* dtt_write() */ -static int _dtt_init(int sensor) +int dtt_init_one(int sensor) { int val; @@ -145,32 +145,7 @@ static int _dtt_init(int sensor) return 1; return 0; -} /* _dtt_init() */ - - -int dtt_init (void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - const char *const header = "DTT: "; - int old_bus; - - /* switch to correct I2C bus */ - old_bus = I2C_GET_BUS(); - I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM); - - for (i = 0; i < sizeof(sensors); i++) { - if (_dtt_init(sensors[i]) != 0) - printf("%s%d FAILED INIT\n", header, i+1); - else - printf("%s%d is %i C\n", header, i+1, - dtt_get_temp(sensors[i])); - } - /* switch back to original I2C bus */ - I2C_SET_BUS(old_bus); - - return (0); -} /* dtt_init() */ +} /* dtt_init_one() */ int dtt_get_temp(int sensor) { diff --git a/drivers/hwmon/lm81.c b/drivers/hwmon/lm81.c index afe5b0d..f1572ba 100644 --- a/drivers/hwmon/lm81.c +++ b/drivers/hwmon/lm81.c @@ -89,7 +89,7 @@ int dtt_write(int sensor, int reg, int val) #define DTT_CONFIG 0x40 #define DTT_ADR 0x48 -static int _dtt_init(int sensor) +int dtt_init_one(int sensor) { int man; int adr; @@ -111,26 +111,9 @@ static int _dtt_init(int sensor) debug ("DTT: Found LM81@%x Rev: %d\n", adr, rev); return 0; -} /* _dtt_init() */ +} /* dtt_init_one() */ -int dtt_init (void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - const char *const header = "DTT: "; - - for (i = 0; i < sizeof(sensors); i++) { - if (_dtt_init(sensors[i]) != 0) - printf("%s%d FAILED INIT\n", header, i+1); - else - printf("%s%d is %i C\n", header, i+1, - dtt_get_temp(sensors[i])); - } - - return (0); -} /* dtt_init() */ - #define TEMP_FROM_REG(temp) \ ((temp)<256?((((temp)&0x1fe) >> 1) * 10) + ((temp) & 1) * 5: \ ((((temp)&0x1fe) >> 1) -255) * 10 - ((temp) & 1) * 5) \ diff --git a/include/dtt.h b/include/dtt.h index 399b64a..bbaa033 100644 --- a/include/dtt.h +++ b/include/dtt.h @@ -52,7 +52,7 @@ #endif #endif /* CONFIG_DTT_ADM1021 */ -extern int dtt_init (void); +extern int dtt_init_one (int); extern int dtt_read(int sensor, int reg); extern int dtt_write(int sensor, int reg, int val); extern int dtt_get_temp(int sensor); -- 1.7.2.3

3 20

[U-Boot] [PATCH] BeagleBoard updates rebased on u-boot-ti and debugged
by Jason Kridner 04 Aug '11

04 Aug '11

This brings in some fixes and some patches currently maintained out-of-tree for the BeagleBoard. It seems for some things, some old code got applied, so I've given updates here. I've broken up the patches into small bits to be accepted/rejected on the hopes of trying to get as much in as possible. The USB patches placed in u-boot-ti aren't working for me, but this brings in some known required patches. Alexander Holler (1): BeagleBoard: config: Switch default console from ttyS2 to ttyO2 Bob Feretich (1): BeagleBoard: Pin mux initialization glitch fix Jason Kridner (24): BeagleBoard: add xM rev C to ID table BeagleBoard: Fixed typo in typecast Corrected LED name match finding avoiding extraneous Usage printouts BeagleBoard: fix LED 0/1 in driver led: added cmd_led to Makefile led: correct off/on locations in structure led: remove trailing whitespace led: loop through all leds led: fixup help/usage BeagleBoard: config: reduce BOOTDELAY to 3 BeagleBoard: config: change default resolution to VGA BeagleBoard: config: don't suck in blank line BeagleBoard: config: make mtest run BeagleBoard: config: increase command-line functionality BeagleBoard: config: load kernel via MMC ext2 BeagleBoard: config: add optargs/buddy/camera BeagleBoard: config: add ramboot BeagleBoard: Added userbutton command BeagleBoard: config: use the USERBUTTON command video: DSS makefile update BeagleBoard: config: enable DSS BeagleBoard: Configure DVI/S-video USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor TWL4030/BeagleBoard: Added hub power enable Steve Sakoman (1): BeagleBoard: config: Remove omapfb.debug=y from Beagle and Overo env settings Syed Mohammed Khasim (1): OMAP3: Add DSS driver for OMAP3 arch/arm/include/asm/arch-omap3/dss.h | 173 +++++++++++++++++++++++++++++++++ board/ti/beagle/beagle.c | 119 +++++++++++++++++++++-- board/ti/beagle/beagle.h | 87 +++++++++++++++++ board/ti/beagle/led.c | 4 +- common/Makefile | 1 + common/cmd_led.c | 18 ++-- drivers/misc/twl4030_led.c | 6 +- drivers/usb/host/ehci.h | 4 +- drivers/video/Makefile | 2 + drivers/video/omap3_dss.c | 130 +++++++++++++++++++++++++ include/configs/omap3_beagle.h | 63 +++++++++--- include/configs/omap3_overo.h | 2 - include/twl4030.h | 1 + 13 files changed, 572 insertions(+), 38 deletions(-) create mode 100644 arch/arm/include/asm/arch-omap3/dss.h create mode 100644 drivers/video/omap3_dss.c

5 38