June 2011 - U-Boot

[U-Boot] PICK UP UR FIRST USD5000.00
by Western Union Transfer 04 Jun '11

04 Jun '11

-- I write to inform you that we have transferred USD$100,000 dollars. we would have called to give you the MTCN on phone but we have lost your call number. we decided to email you the MTCN and sender name so that you can pick starting cashing your money of USD5000.00 daily instalment with the same MTCN and sender's name which will be valid for 20 days until you cash the full $100,000.00usd. Sender's Fist name: Perry Sender's Last Name: Poston MTCN: 0341153617 Question: Who Is Great Answer: God Amount: $5000.00USD Total Amount To be cashed:$100,000usd With due respect please get back to us urgently after picking ur first USD5000.00 to anable us direct you for another!!! Thanks Best Regards Mr Phoenix Andersson. Western Union Transfer NIGERIA OFFICE,F.C.T,Abuja Email: moneyofficew(a)yahoo.com.hk Tel:+2348134736503

1 0

[U-Boot] PICK UP UR FIRST USD5000.00
by Western Union Transfer 04 Jun '11

04 Jun '11

-- I write to inform you that we have transferred USD$100,000 dollars. we would have called to give you the MTCN on phone but we have lost your call number. we decided to email you the MTCN and sender name so that you can pick starting cashing your money of USD5000.00 daily instalment with the same MTCN and sender's name which will be valid for 20 days until you cash the full $100,000.00usd. Sender's Fist name: Perry Sender's Last Name: Poston MTCN: 0341153617 Question: Who Is Great Answer: God Amount: $5000.00USD Total Amount To be cashed:$100,000usd With due respect please get back to us urgently after picking ur first USD5000.00 to anable us direct you for another!!! Thanks Best Regards Mr Phoenix Andersson. Western Union Transfer NIGERIA OFFICE,F.C.T,Abuja Email: moneyofficew(a)yahoo.com.hk Tel:+2348134736503

1 0

[U-Boot] LOAN OFFER APPLY NOW
by Mrs KELLY NEWTON LOAN FIRM 03 Jun '11

03 Jun '11

Hi I am Mrs Kelly Newton a loan lender,I am a citizen of Singapore,But i currently base in uk because of my Loan Company,I am philanthropist,I give out loan at 3% rate.i join the lender union to help the people in difference way.If interested,send me your name-phone number and your country to me.for further information contact my secretary,Mr Collins Owen with the email address below.(mrs-knewtonloanoffi33(a)ozledim.net) Best wishes, Mrs.Kelly Newton. C.E.O MRS KELLY NEWTON LOAN FIRM.

1 0

Re: [U-Boot] [PATCH V2 1/2] GPIO: Tegra2: add GPIO driver for Tegra2
by Michael Walle 03 Jun '11

03 Jun '11

Am Di, 3.05.2011, 00:45, schrieb Tom Warren: > Signed-off-by: Tom Warren <twarren(a)nvidia.com> > --- > Changes in V2: > - use 'gpio_pin' enum in gpio.h (Simon Glass review request) > - change 'GPIO_PORT8' to 'GPIO_FULLPORT' (Simon Glass request) > - change 'offset' to 'pin' globally > > arch/arm/include/asm/arch-tegra2/gpio.h | 244 ++++++++++++++++++++++++- > drivers/gpio/Makefile | 1 + > drivers/gpio/tegra2_gpio.c | 299 Does this (SoC) driver belong to drivers/gpio/ or arch/arm/cpu/armv7/tegra2/? To me it seems that both are used for architectures/SoCs specific drivers (eg. blackfin, omap in arch/ and at91 in drivers/gpio/). What is the preferred directory? -- Michael

4 10

[U-Boot] (no subject)
by Microsoft Inc 03 Jun '11

03 Jun '11

Your Email Id has won 1,000,000.00 GBP in the British MICROSOFT INC Promo 2011. send your Names. Address. Sex. Age. Tel. Occupation. Country. to our claims deparment: robertgoldsmith7(a)live.co.uk +447010040973 Mr. Robert Goldsmith

1 0

[U-Boot] [PATCH 1/7] powerpc/i2c: introduce CONFIG_I2C_TWR for setting tWR value
by York Sun 03 Jun '11

03 Jun '11

From: york <yorksun(a)freescale.com> EEPROM requires tWR for write cycle time. Since there is no other way to poll if the internal programming ends, wait for 5ms which is the max timing for AT24C01/02/04/08/16 by default. It can be overridden by defining CONFIG_I2C_TWR in configuration file if the slowest device has different write cycle time. Signed-off-by: York Sun <yorksun(a)freescale.com> --- README | 7 +++++++ drivers/i2c/fsl_i2c.c | 9 +++++++++ 2 files changed, 16 insertions(+), 0 deletions(-) diff --git a/README b/README index 8bb9c8d..83a316c 100644 --- a/README +++ b/README @@ -1717,6 +1717,13 @@ The following options need to be configured: devices can use either method, but some require one or the other. + CONFIG_I2C_TWR + + defining this will override the default write cycle time + 5ms which is the default for AT24C01/02/4/08/16. If the + slowest I2C device has different write cycle time, this + option should be defined. The unit is microsecond. + - SPI Support: CONFIG_SPI Enables SPI driver (so far only tested with diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index cb13dee..d192b2a 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -42,6 +42,14 @@ #define CONFIG_I2C_TIMEOUT 10000 #endif +/* + * tWR is the write cycle time for EEPROM device + * in microseconds + */ +#ifndef CONFIG_I2C_TWR +#define CONFIG_I2C_TWR 5000 +#endif + #define I2C_READ_BIT 1 #define I2C_WRITE_BIT 0 @@ -416,6 +424,7 @@ i2c_write(u8 dev, uint addr, int alen, u8 *data, int length) if (i2c_wait4bus()) /* Wait until STOP */ debug("i2c_write: wait4bus timed out\n"); + udelay(CONFIG_I2C_TWR); if (i == length) return 0; -- 1.7.0.4

4 18

Re: [U-Boot] (no subject)
by Mr Wen Lee 03 Jun '11

03 Jun '11

I am requesting for your partnership in re-profiling funds I will give the details, but in summary, the funds are coming via Bank Of Taipei Taiwan.Contact me for further details (wen.lee88(a)9.cn) Wen Lee.

1 0

Re: [U-Boot] (no subject)
by Mr Wen Lee 03 Jun '11

03 Jun '11

I am requesting for your partnership in re-profiling funds I will give the details, but in summary, the funds are coming via Bank Of Taipei Taiwan.Contact me for further details (wen.lee88(a)9.cn) Wen Lee.

1 0

[U-Boot] [Timer]Help need to clean up udelay() for several ARM CPUs
by Graeme Russ 03 Jun '11

03 Jun '11

Hi Guys, I'm trying to cleanup the old timer API as much as possible in preparation for the new API. I've managed to purge reset_timer() for all but Nios2 as well as get_timer(). Where timer_init() was calling set_timer() or reset_timer() I folded the code into timer_init() I have then proceeded to do the same to reset_timer_masked() - Mostly this was only called by reset_timer() which in turn was only called by timer_init(), but the following 8 files have reset_timer_masked() used in udelay() arch/arm/cpu/arm926ejs/omap/timer.c arch/arm/cpu/arm926ejs/versatile/timer.c arch/arm/cpu/arm1136/omap24xx/timer.c arch/arm/cpu/arm1136/mx35/timer.c arch/arm/cpu/arm920t/a320/timer.c arch/arm/cpu/armv7/s5p-common/timer.c arch/arm/cpu/lh7a40x/timer.c board/armltd/vexpress/ca9x4_ct_vxp.c Now I'm sure something very funky is going on which allows udelay() to call reset_timer_masked() with impacting on get_timer() but I don't know ARM at all and I'm not willing to mess around with these for fear of causing a rather large breakage. Can someone please look into these and let me know how I can safely sanitise these 8 implementations of udelay()? If all else fails, I'll just make reset_timer_masked static in these files Thanks in advance Graeme

1 0

Re: [U-Boot] [STATUS] WARNING: huge ARM board removal pending
by Wolfgang Denk 03 Jun '11

03 Jun '11

Dear "Andy Pont", In message <009601cc21c8$92412360$b6c36a20$@pont@sdcsystems.com> you wrote: > > Although I'm not the board maintainer I do have an omap5912osk board sat on > the shelf and am happy to do the necessary work to get the current code > release to work but it would have to wait until some current project work is > completed which may take the rest of June. > > Is that OK? Sure. Thanks in advance. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de There is, however, a strange, musty smell in the air that reminds me of something...hmm...yes...I've got it...there's a VMS nearby, or I'm a Blit. - Larry Wall in Configure from the perl distribution

1 0