June 2011 - U-Boot

[U-Boot] Pull request: nand flash
by Scott Wood 01 Jun '11

01 Jun '11

The following changes since commit 5d1ee00b1fe1180503f6dfc10e87a6c6e74778f3: .gitignore: update list of u-boot.* files and add *.bin (2011-05-22 23:46:26 +0200) are available in the git repository at: git://git.denx.de/u-boot-nand-flash.git master Daniel Hobi (2): env_nand: zero-initialize variable nand_erase_options cmd_nand: fix help of nand erase subcommand common/cmd_nand.c | 2 +- common/env_nand.c | 8 ++------ 2 files changed, 3 insertions(+), 7 deletions(-)

2 1

[U-Boot] [PATCH] Move wepep250,delta,xsengine to scrapyard
by Marek Vasut 01 Jun '11

01 Jun '11

Drop wepep250 board from MAINTAINERS and add all these three boards to doc/README.scrapyard Signed-off-by: Marek Vasut <marek.vasut(a)gmail.com> --- MAINTAINERS | 4 ---- doc/README.scrapyard | 3 +++ 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index e2c48a8..5d110a8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -639,10 +639,6 @@ Fabio Estevam <fabio.estevam(a)freescale.com> mx31pdk i.MX31 -Peter Figuli <peposh(a)etc.sk> - - wepep250 xscale - Daniel Gorsulowski <daniel.gorsulowski(a)esd.eu> meesc ARM926EJS (AT91SAM9263 SoC) diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 5cdf151..d7bf9a7 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,9 @@ easily if here is something they might want to dig for... Board Arch CPU removed Commit last known maintainer/contact ============================================================================= +xsengine ARM PXA2xx 4262a7c 2010-10-20 +wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh(a)etc.sk> +delta ARM PXA2xx 75e2035 2010-10-20 mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric Bénard <eric(a)eukrea.com> barco powerpc MPC8245 - 2010-11-23 Marc Leeman <marc.leeman(a)barco.com> ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand(a)peppercon.de> -- 1.7.4.1

2 1

[U-Boot] [PATCH 0/5] Common AHCI and SDHCI drivers
by Rob Herring 01 Jun '11

01 Jun '11

From: Rob Herring <rob.herring(a)calxeda.com> This patch series enables common SDHCI and AHCI drivers for other platforms to use. The AHCI driver is modified to support non-PCI versions of the controller. The Samsung s5p mmc driver appears to be the cleanest implementation of an SDHCI controller based on reviewing various Linux SDHCI drivers. The FSL ESDHCI controller is also, but has quite a few quirks. IIRC, the omap HSMMC block is also based on SDHCI. Rob Rob Herring (5): mmc: copy s5p to sdhci mmc: sdhci: rework Samsung specfic code mmc: sdhci: exit cmd on error status scsi/ahci: ata id little endian fix scsi/ahci: add support for non-PCI controllers arch/arm/include/asm/arch-s5pc1xx/mmc.h | 72 ---- arch/arm/include/asm/arch-s5pc2xx/mmc.h | 72 ---- board/samsung/goni/goni.c | 4 +- board/samsung/universal_c210/universal.c | 6 +- common/cmd_scsi.c | 6 +- drivers/block/ahci.c | 64 ++++- drivers/mmc/Makefile | 3 +- drivers/mmc/s5p_mmc.c | 478 --------------------------- drivers/mmc/sdhci.c | 527 ++++++++++++++++++++++++++++++ include/sdhci.h | 18 + 10 files changed, 613 insertions(+), 637 deletions(-) delete mode 100644 arch/arm/include/asm/arch-s5pc1xx/mmc.h delete mode 100644 arch/arm/include/asm/arch-s5pc2xx/mmc.h delete mode 100644 drivers/mmc/s5p_mmc.c create mode 100644 drivers/mmc/sdhci.c create mode 100644 include/sdhci.h -- 1.7.4.1

2 9

[U-Boot] [PATCH] mx31ads: Use the new relocation scheme
by Fabio Estevam 01 Jun '11

01 Jun '11

This fixes the MX31ADS build by using the new relocation scheme. Signed-off-by: Fabio Estevam <fabio.estevam(a)freescale.com> --- Build tested only. Do not have the hardware handy to test. board/freescale/mx31ads/mx31ads.c | 19 ++++++++++++--- board/freescale/mx31ads/u-boot.lds | 42 ++++++++++++++++++++++++++++------- include/configs/mx31ads.h | 7 ++++++ 3 files changed, 55 insertions(+), 13 deletions(-) diff --git a/board/freescale/mx31ads/mx31ads.c b/board/freescale/mx31ads/mx31ads.c index a298e05..3286399 100644 --- a/board/freescale/mx31ads/mx31ads.c +++ b/board/freescale/mx31ads/mx31ads.c @@ -28,15 +28,21 @@ DECLARE_GLOBAL_DATA_PTR; -int dram_init (void) +int dram_init(void) +{ + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, + PHYS_SDRAM_1_SIZE); + return 0; +} + +void dram_init_banksize(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return 0; } -int board_init (void) +int board_early_init_f(void) { int i; @@ -94,6 +100,11 @@ int board_init (void) readb(CS4_BASE + 8); readb(CS4_BASE + 7); + return 0; +} + +int board_init(void) +{ gd->bd->bi_arch_number = MACH_TYPE_MX31ADS; /* board id for linux */ gd->bd->bi_boot_params = 0x80000100; /* adress of boot parameters */ diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds index b081b21..79eb7ac 100644 --- a/board/freescale/mx31ads/u-boot.lds +++ b/board/freescale/mx31ads/u-boot.lds @@ -48,23 +48,47 @@ SECTIONS *(.text) } - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + .rodata : { *(.rodata) } . = ALIGN(4); - .data : { *(.data) } + .data : { + *(.data) + } . = ALIGN(4); - .got : { *(.got) } - - . = .; __u_boot_cmd_start = .; .u_boot_cmd : { *(.u_boot_cmd) } __u_boot_cmd_end = .; . = ALIGN(4); - __bss_start = .; - .bss : { *(.bss) . = ALIGN(4); } - __bss_end__ = .; + + .rel.dyn : { + __rel_dyn_start = .; + *(.rel*) + __rel_dyn_end = .; + } + + .dynsym : { + __dynsym_start = .; + *(.dynsym) + } + + _end = .; + + .bss __rel_dyn_start (OVERLAY) : { + __bss_start = .; + *(.bss) + . = ALIGN(4); + __bss_end__ = .; + } + + /DISCARD/ : { *(.bss*) } + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynsym*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.hash*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } } diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index 5ea59b4..01ff528 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -160,6 +160,13 @@ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 CSD0_BASE #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET) /*----------------------------------------------------------------------- * FLASH and environment organization -- 1.6.0.4

2 1

[U-Boot] [PATCH v7 0/5] Add SMSC95XX support including MAC address control
by Simon Glass 01 Jun '11

01 Jun '11

The SMSC95XX is a USB hub with a built-in Ethernet adapter. This adds support for this, using the USB host network framework. The framework is extended to support setting the hardware MAC address via an environment variable, since SMSC95XX chips often have no EEPROM attached, and thus no MAC address. Documentation is added on USB networking, the auto load code is refactored to remove duplication, and the ASIX USB ethernet driver is optimized to reduce the time between successive network operations. Changes for v2: - Coding style cleanup - Changed some comments as suggested - eth_set_hwaddr -> eth_write_hwaddr - tided up other users of eth_getenv_enetaddr_by_index() Changes for v3: - Drop tfpserverip patch - Change turbo_mode to #define - Fix tfpserverip patch bleed Changes for v4: - Dropped Tegra2 specific bit - Added patch in place of tftpserverip patch, to speed up successive network commands on asix - Fixed a few broken bits in SMSC from my testing Changes for v5: - Code style clean-ups in SMSC - Cleaned up debugging of errors in SMSC driver - Changed NULL to "eth" in eth_getenv_enetaddr_by_index() API Changes for v6: - Adjust documentation file according to Wolfgang's comments - Set NET_IP_ALIGN to 0 always Changes for v7: - Added change logs to each patch as requested by Wolfgang Simon Glass (5): Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter Add Ethernet hardware MAC address framework to usbnet Add documentation for USB Host Networking Put common autoload code into auto_load() function usbeth: asix: Do a fast init if link already established board/davinci/common/misc.c | 2 +- doc/README.usb | 157 ++++++++- drivers/net/designware.c | 2 +- drivers/usb/eth/Makefile | 1 + drivers/usb/eth/asix.c | 36 ++- drivers/usb/eth/smsc95xx.c | 878 +++++++++++++++++++++++++++++++++++++++++++ drivers/usb/eth/usb_ether.c | 16 +- include/net.h | 25 ++- include/usb_ether.h | 18 +- net/bootp.c | 75 ++--- net/eth.c | 64 ++-- 11 files changed, 1185 insertions(+), 89 deletions(-) create mode 100644 drivers/usb/eth/smsc95xx.c -- 1.7.3.1

1 5

[U-Boot] [PATCH] SMDKV310: Fix incorrect conditional compilation for MIU linear mapping
by Thomas Abraham 01 Jun '11

01 Jun '11

Fix the incorrect macro check for MIU linear mapping conditional compilation. Signed-off-by: Thomas Abraham <thomas.abraham(a)linaro.org> --- board/samsung/smdkv310/mem_setup.S | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/board/samsung/smdkv310/mem_setup.S b/board/samsung/smdkv310/mem_setup.S index d8c3ed4..73aebe3 100644 --- a/board/samsung/smdkv310/mem_setup.S +++ b/board/samsung/smdkv310/mem_setup.S @@ -123,7 +123,7 @@ mem_ctrl_asm_init: ldr r1, =0x00312640 str r1, [r0, #0x04] @DMC_MEMCONTROL] -#ifdef MIU_LINEAR +#ifdef CONFIG_MIU_LINEAR ldr r1, =0x40e01323 str r1, [r0, #0x08] @DMC_MEMCONFIG0 ldr r1, =0x60e01323 @@ -255,7 +255,7 @@ mem_ctrl_asm_init: ldr r1, =0x00312640 str r1, [r0, #0x04] @DMC_MEMCONTROL] -#ifdef MIU_LINEAR +#ifdef CONFIG_MIU_LINEAR ldr r1, =0x40e01323 str r1, [r0, #0x08] @DMC_MEMCONFIG0 ldr r1, =0x60e01323 -- 1.6.6.rc2

3 2

[U-Boot] [PATCH] SMDKV310: CPU fequency and mmc_pre_ratio modified
by Chander Kashyap 01 Jun '11

01 Jun '11

Modifies CPU Frequency to 1GHz and removes hard coding of mmc_pre_ratio for MMC Channel2 in FSYS2 register. Signed-off-by: Chander Kashyap <chander.kashyap(a)linaro.org> --- board/samsung/smdkv310/lowlevel_init.S | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/board/samsung/smdkv310/lowlevel_init.S b/board/samsung/smdkv310/lowlevel_init.S index 359cff4..04f6579 100644 --- a/board/samsung/smdkv310/lowlevel_init.S +++ b/board/samsung/smdkv310/lowlevel_init.S @@ -170,7 +170,7 @@ system_clock_init: * COREM1_RATIO[8] 0x7 * COREM0_RATIO[4] 0x3 */ - ldr r1, =0x01133730 + ldr r1, =0x0133730 ldr r2, =0x14500 @CLK_DIV_CPU0_OFFSET str r1, [r0, r2] @@ -245,7 +245,7 @@ system_clock_init: str r1, [r0, r2] /* MMC[2:3] */ - ldr r1, =0x000f020f /* 800(MPLL) / (15 + 1) */ + ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */ ldr r2, =0x0C548 @ CLK_DIV_FSYS2 str r1, [r0, r2] -- 1.7.4.1

3 2

[U-Boot] [PATCH 0/4] ST-Ericsson U8500 support
by John Rigby 01 Jun '11

01 Jun '11

Add support for ST-Ericsson U8500 SoC and HREF platform John Rigby (1): armv7: Add support for ST-Ericsson U8500 href platform Michael Brandt (1): I2C: add driver of st-ericsson u8500 i2c Rabin Vincent (2): p101x: extra init for u8500 armv7: Add ST-Ericsson u8500 arch arch/arm/cpu/armv7/u8500/Makefile | 46 +++ arch/arm/cpu/armv7/u8500/clock.c | 56 +++ arch/arm/cpu/armv7/u8500/lowlevel.S | 33 ++ arch/arm/cpu/armv7/u8500/timer.c | 167 ++++++++ arch/arm/include/asm/arch-u8500/ab8500.h | 523 ++++++++++++++++++++++++ arch/arm/include/asm/arch-u8500/bits.h | 58 +++ arch/arm/include/asm/arch-u8500/clock.h | 72 ++++ arch/arm/include/asm/arch-u8500/common.h | 107 +++++ arch/arm/include/asm/arch-u8500/gpio.h | 247 ++++++++++++ arch/arm/include/asm/arch-u8500/hardware.h | 83 ++++ arch/arm/include/asm/arch-u8500/u8500.h | 47 +++ board/st-ericsson/u8500/Makefile | 50 +++ board/st-ericsson/u8500/gpio.c | 346 ++++++++++++++++ board/st-ericsson/u8500/prcmu-fw-defs_v1.h | 578 ++++++++++++++++++++++++++ board/st-ericsson/u8500/prcmu-fw.h | 182 +++++++++ board/st-ericsson/u8500/prcmu.c | 167 ++++++++ board/st-ericsson/u8500/u8500_href.c | 540 +++++++++++++++++++++++++ boards.cfg | 1 + drivers/i2c/Makefile | 1 + drivers/i2c/u8500_i2c.c | 603 ++++++++++++++++++++++++++++ drivers/i2c/u8500_i2c.h | 220 ++++++++++ drivers/serial/serial_pl01x.c | 10 + drivers/serial/serial_pl01x.h | 4 + include/configs/u8500_href.h | 243 +++++++++++ 24 files changed, 4384 insertions(+), 0 deletions(-) create mode 100644 arch/arm/cpu/armv7/u8500/Makefile create mode 100644 arch/arm/cpu/armv7/u8500/clock.c create mode 100644 arch/arm/cpu/armv7/u8500/lowlevel.S create mode 100644 arch/arm/cpu/armv7/u8500/timer.c create mode 100644 arch/arm/include/asm/arch-u8500/ab8500.h create mode 100644 arch/arm/include/asm/arch-u8500/bits.h create mode 100644 arch/arm/include/asm/arch-u8500/clock.h create mode 100644 arch/arm/include/asm/arch-u8500/common.h create mode 100644 arch/arm/include/asm/arch-u8500/gpio.h create mode 100644 arch/arm/include/asm/arch-u8500/hardware.h create mode 100644 arch/arm/include/asm/arch-u8500/u8500.h create mode 100644 board/st-ericsson/u8500/Makefile create mode 100644 board/st-ericsson/u8500/gpio.c create mode 100644 board/st-ericsson/u8500/prcmu-fw-defs_v1.h create mode 100644 board/st-ericsson/u8500/prcmu-fw.h create mode 100644 board/st-ericsson/u8500/prcmu.c create mode 100644 board/st-ericsson/u8500/u8500_href.c create mode 100644 drivers/i2c/u8500_i2c.c create mode 100644 drivers/i2c/u8500_i2c.h create mode 100644 include/configs/u8500_href.h

5 41

[U-Boot] [PATCH] Kirkwood: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT
by Prafulla Wadaskar 01 Jun '11

01 Jun '11

CONFIG_CMD_AUTOSCRIPT support is deprecated and non-existing This clean up patch removes the references for Marvell boards Signed-off-by: Prafulla Wadaskar <prafulla(a)marvell.com> --- include/configs/mv88f6281gtw_ge.h | 1 - include/configs/openrd_base.h | 1 - include/configs/rd6281a.h | 1 - include/configs/sheevaplug.h | 1 - 4 files changed, 0 insertions(+), 4 deletions(-) diff --git a/include/configs/mv88f6281gtw_ge.h b/include/configs/mv88f6281gtw_ge.h index 96b4d1c..a7db659 100644 --- a/include/configs/mv88f6281gtw_ge.h +++ b/include/configs/mv88f6281gtw_ge.h @@ -91,7 +91,6 @@ */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #include <config_cmd_default.h> -#define CONFIG_CMD_AUTOSCRIPT #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_FAT diff --git a/include/configs/openrd_base.h b/include/configs/openrd_base.h index 88f27ba..7e915e4 100644 --- a/include/configs/openrd_base.h +++ b/include/configs/openrd_base.h @@ -96,7 +96,6 @@ */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #include <config_cmd_default.h> -#define CONFIG_CMD_AUTOSCRIPT #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_FAT diff --git a/include/configs/rd6281a.h b/include/configs/rd6281a.h index 3d8e25c..8ad359d 100644 --- a/include/configs/rd6281a.h +++ b/include/configs/rd6281a.h @@ -90,7 +90,6 @@ */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #include <config_cmd_default.h> -#define CONFIG_CMD_AUTOSCRIPT #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_FAT diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index fc401a8..c7695fe 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -90,7 +90,6 @@ */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #include <config_cmd_default.h> -#define CONFIG_CMD_AUTOSCRIPT #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_FAT -- 1.5.3.3

2 2

[U-Boot] Auto insurance (6/1/2011)
by David Gorman 01 Jun '11

01 Jun '11

Hello, Our company represents an online community of over 36 million people, most of which are located in the US and Canada. This advertising allows us to present our online community with a first choice when they search for anything on any of the major search engines. We seek a preferred source to send our users on the major search engines for auto insurance in Milwaukee and surrounding markets. Please feel free to contact me at your convenience. I’m in the office Monday-Friday from 9:00 AM to 5:00 PM Pacific time. Yours truly, David Gorman IFP Analyst, SPN WebSearch Phone: (888) 418-0972, ext. 1663

1 0