April 2011 - U-Boot

[U-Boot] [PATCH] BeagleBoard: add xM rev C to ID table
by Jason Kridner 18 Apr '11

18 Apr '11

A simple addition to the revision IDs. This patch depends upon http://patchwork.ozlabs.org/patch/85303/. Signed-off-by: Jason Kridner <jkridner(a)beagleboard.org> --- board/ti/beagle/beagle.c | 12 ++++++++++++ board/ti/beagle/beagle.h | 1 + 2 files changed, 13 insertions(+), 0 deletions(-) diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 905b151..0596443 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -168,6 +168,7 @@ void display_init(void) break; case REVISION_XM_A: case REVISION_XM_B: + case REVISION_XM_C: default: omap3_dss_panel_config(&dvid_cfg_xm); break; @@ -227,6 +228,16 @@ int misc_init_r(void) TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, TWL4030_PM_RECEIVER_DEV_GRP_P1); break; + case REVISION_XM_C: + printf("Beagle xM Rev C\n"); + setenv("beaglerev", "xMC"); + MUX_BEAGLE_XM(); + /* Set VAUX2 to 1.8V for EHCI PHY */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, + TWL4030_PM_RECEIVER_VAUX2_VSEL_18, + TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); + break; default: printf("Beagle unknown 0x%02x\n", get_board_revision()); MUX_BEAGLE_XM(); @@ -372,6 +383,7 @@ int do_userbutton (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) break; case REVISION_XM_A: case REVISION_XM_B: + case REVISION_XM_C: default: gpio = 4; break; diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h index bdf2a6f..f31ce31 100644 --- a/board/ti/beagle/beagle.h +++ b/board/ti/beagle/beagle.h @@ -41,6 +41,7 @@ const omap3_sysinfo sysinfo = { #define REVISION_C4 0x5 #define REVISION_XM_A 0x0 #define REVISION_XM_B 0x1 +#define REVISION_XM_C 0x2 /* * IEN - Input Enable -- 1.5.6.4

2 1

[U-Boot] [PATCH] ARMV7: OMAP3: BeagleBoard: add more expansionboard IDs
by Jason Kridner 18 Apr '11

18 Apr '11

From: Koen Kooi <koen(a)dominion.thruhere.net> Signed-off-by: Koen Kooi <koen(a)dominion.thruhere.net> Signed-off-by: Jason Kridner <jkridner(a)beagleboard.org> --- board/ti/beagle/beagle.c | 16 ++++++++++++++++ 1 files changed, 16 insertions(+), 0 deletions(-) diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index d9b6f01..520e57d 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -48,6 +48,10 @@ #define TINCANTOOLS_TRAINER 0x04000100 #define TINCANTOOLS_SHOWDOG 0x03000100 #define KBADC_BEAGLEFPGA 0x01000600 +#define LW_BEAGLETOUCH 0x01000700 +#define LCDOG_BRAINMUX 0x01000800 +#define LCDOG_BRAINMUXTOUCH 0x02000800 +#define SF_HARDHAT 0x01000900 #define BEAGLE_NO_EEPROM 0xffffffff @@ -223,6 +227,18 @@ int misc_init_r(void) MUX_KBADC_BEAGLEFPGA(); setenv("buddy", "beaglefpga"); break; + case LW_BEAGLETOUCH: + printf("Recognized Liquidware Beagletouch board\n"); + setenv("buddy", "beagletouch"); + break; + case LCDOG_BRAINMUX: + printf("Recognized Brainmux LCDog board\n"); + setenv("buddy", "lcdog"); + break; + case LCDOG_BRAINMUXTOUCH: + printf("Recognized Brainmux LCDog Touch board\n"); + setenv("buddy", "lcdogtouch"); + break; case BEAGLE_NO_EEPROM: printf("No EEPROM on expansion board\n"); setenv("buddy", "none"); -- 1.5.6.4

6 14

[U-Boot] [PATCH] ARMV7: OMAP3: BeagleBoard: Enable pullups on i2c2.
by Jason Kridner 18 Apr '11

18 Apr '11

From: Steve Kipisz <s-kipisz2(a)ti.com> Signed-off-by: Jason Kridner <jkridner(a)beagleboard.org> --- arch/arm/include/asm/arch-omap3/omap3.h | 9 +++++++++ board/ti/beagle/beagle.c | 3 +++ 2 files changed, 12 insertions(+), 0 deletions(-) diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h index 3957c79..1860dff 100644 --- a/arch/arm/include/asm/arch-omap3/omap3.h +++ b/arch/arm/include/asm/arch-omap3/omap3.h @@ -50,6 +50,15 @@ /* CONTROL */ #define OMAP34XX_CTRL_BASE (OMAP34XX_L4_IO_BASE + 0x2000) +/* Signal Integrity Parameter Control Registers */ +#define CONTROL_PROG_IO0 0x48002444 +#define CONTROL_PROG_IO1 0x48002448 +#define CONTROL_PROG_IO2 0x48002408 +#define CONTROL_PROG_IO_WKUP1 0x48002A80 + +/* Bit definition for CONTROL_PROG_IO1 */ +#define PRG_I2C2_PULLUPRESX 0x00000001 + /* UART */ #define OMAP34XX_UART1 (OMAP34XX_L4_IO_BASE + 0x6a000) #define OMAP34XX_UART2 (OMAP34XX_L4_IO_BASE + 0x6c000) diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index dd7b6b5..6074eca 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -160,6 +160,9 @@ int misc_init_r(void) struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE; struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE; + /* Enable i2c2 pullup resisters */ + *(ulong *)(CONTROL_PROG_IO1) &= ~(PRG_I2C2_PULLUPRESX); + switch (get_board_revision()) { case REVISION_AXBX: printf("Beagle Rev Ax/Bx\n"); -- 1.5.6.4

3 4

[U-Boot] Loan Offer...
by Norton Finance Loan 18 Apr '11

18 Apr '11

Dear Sir/Madam, Welcome to Norton Finance Loan firm, we wish to inform the public within United Kingdom and Abroad that is company is offering a 3% interest loan.we are offering loan within the range of $500 to $100,000,000.00 USD from 1 Year to 50 years. We take lead in the history of loan in the United Kingdom,we welcome every customer small or big with thesame respect and customer service. Interested persons should contact us via email and address below. Mr. Hillary Hamfort Tel: +447024084104 Email: nortonfinanceloan_hh(a)mygroupuser.com 1) Full Name: 2) Age: 3) Sex: 4) Occupation: 5) Marital Status: 6) Nationality: 7) Loan Amount needed: 8) Loan Duration: 9) Monthly Income: 10) Reason for loan: 11) Tel: This loan is open for all countries and you must be 18 and above to apply for this loan. As soon as we receive your application we will send you other procedures. Regards Mr. Martins Wood Norton Finance Loan

1 0

[U-Boot] subscribe me to this list
by Ratheendran R 18 Apr '11

18 Apr '11

Dear All, Please consider this as my request to join u-boot user's list. Regards, Ratheendran

2 1

[U-Boot] Beagle mux config: nCS5 vs. DMAREQ2?
by Orjan Friberg 18 Apr '11

18 Apr '11

Hi, The mux configuration in board/ti/beagle/beagle.h says MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/ MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1)) /*SYS_nDMA_REQ2*/ The TRM (spruf98p) says sys_ndmareq2 is mux mode 1 for ncs5, not ncs6. (Possibly not a concern for the BeagleBoard; I'm trying to get dmareq2 working on a custom 3730 board.) Thanks, Orjan -- Orjan Friberg FlatFrog Laboratories AB

1 0

[U-Boot] [PATCH 0/3] Get AVR32 boards working with partial linking
by Andreas Bießmann 18 Apr '11

18 Apr '11

This patch series make avr32 boards compile again. They where broken by partial linking changes. Additionally two warnings fixed. MAKEALL complained broken boards cause of these warnings. In my opinion these changes are fixes and should go into v2011.03. Some more changes will follow for AVR32/AT91 rework branch. All patches tested with atstk1002 and one selfmade board not in official tree. Andreas Bießmann (3): cmd_nvedit: use explicit typecast for printf avr32: fix linking common/cmd_bdinfo.c: fix do_bdinfo() for AVR32 arch/avr32/config.mk | 2 +- board/atmel/atngw100/config.mk | 1 - board/atmel/atstk1000/config.mk | 1 - board/earthlcd/favr-32-ezkit/config.mk | 1 - board/mimc/mimc200/config.mk | 1 - board/miromico/hammerhead/config.mk | 1 - common/cmd_bdinfo.c | 2 +- common/cmd_nvedit.c | 4 ++-- 8 files changed, 4 insertions(+), 9 deletions(-) -- 1.7.2.3

3 8

[U-Boot] [PATCH 1/4] atmel_dataflash: remove use of get_timer_masked
by Alessandro Rubini 18 Apr '11

18 Apr '11

Commit 5dca710a3d7703e41da0e9894f2d71f9e25bea6b removed get_timer_masked for at91. The dataflash driver was still using it and so stopped compiling. This blindly fixes the compilation problem (I am not currently using dataflash). Signed-off-by: Alessandro Rubini <rubini(a)gnudd.com> --- drivers/spi/atmel_dataflash_spi.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/atmel_dataflash_spi.c b/drivers/spi/atmel_dataflash_spi.c index 4a5c4aa..d5215c0 100644 --- a/drivers/spi/atmel_dataflash_spi.c +++ b/drivers/spi/atmel_dataflash_spi.c @@ -158,12 +158,12 @@ unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) } /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + reset_timer(); timeout = 0; writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR); while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_RXBUFF) && - ((timeout = get_timer_masked()) < CONFIG_SYS_SPI_WRITE_TOUT)); + ((timeout = get_timer(0)) < CONFIG_SYS_SPI_WRITE_TOUT)); writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR); pDesc->state = IDLE; -- 1.5.6.5

3 5

[U-Boot] [PATCH 1/2] Fix timer usage of the Atmel SPI dataflash driver
by Remy Bohmer 18 Apr '11

18 Apr '11

Signed-off-by: Remy Bohmer <linux(a)bohmer.net> --- drivers/spi/atmel_dataflash_spi.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/spi/atmel_dataflash_spi.c b/drivers/spi/atmel_dataflash_spi.c index 4a5c4aa..2f23f54 100644 --- a/drivers/spi/atmel_dataflash_spi.c +++ b/drivers/spi/atmel_dataflash_spi.c @@ -133,7 +133,7 @@ unsigned int AT91F_SpiWrite1(AT91PS_DataflashDesc pDesc); unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) { - unsigned int timeout; + u32 time_start, timeout; pDesc->state = BUSY; @@ -158,12 +158,12 @@ unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) } /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); - timeout = 0; + time_start = get_timer(0); writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR); while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_RXBUFF) && - ((timeout = get_timer_masked()) < CONFIG_SYS_SPI_WRITE_TOUT)); + ((timeout = get_timer(time_start)) < CONFIG_SYS_SPI_WRITE_TOUT)); + writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR); pDesc->state = IDLE; -- 1.7.1

4 11

[U-Boot] Ticket number: YG764T 854R
by COCA-COLA＠une-pmta04.une.net.co 18 Apr '11

18 Apr '11

COCA-COLA INC. PO Box 1010,Great Britain. L70 1NL,United Kingdom Seria No: 110922 Ticket number: YG764T 854R Congratulations!!! Your email address has just won you the sum of £200, 000. 00 (Great British Pounds Sterlings) In the on going Coca-Cola Inc. Season's Promotion UK 2011.In line with The commemorating event marking our 25th anniversary, We rolled out over 75,000.000.00 (Seventy Five Million Great Britain Pounds) for our 25TH Anniversary Draws you are among the 7 lucky winners. To claim your prize contact our Claims Department via email with Personal details. E-mail: clearingpaymenthouse(a)gmail.com 1. Scan copy of your identity Proof. 2. Complete Names: 3. Address: 4. Age: 5. Occupation: 6. Telephone: 7. Sex: Male 8. Marital Status: 9. Country: 10: State: IMPORTANT:Please fill the below verification form required for authentication and verification by the India High Commission in London: ANNOUNCER. Sir Edward C. N. Branson +44-704-579-2572 Copyright © Coca-Cola Inc 2011 Times Internet Limited. All rights reserved

1 0