March 2011 - U-Boot

[U-Boot] {Spam?} skip relocation
by Marcel 14 Aug '11

14 Aug '11

Hi, In my previous working version of U-boot I used CONFIG_SKIP_RELOCATION but this doesn't seem to work any more. Any reason why it doesn't work any more ? Is there another way to skip relocation ? regards, Marcel

4 16

[U-Boot] [PATCH][NEXT] hwmon: do not init sensors on startup
by Heiko Schocher 04 Aug '11

04 Aug '11

The U-Boot Design Principles[1] clearly say: Initialize devices only when they are needed within U-Boot, i.e. don't initialize the Ethernet interface(s) unless U-Boot performs a download over Ethernet; don't initialize any IDE or USB devices unless U-Boot actually tries to load files from these, etc. (and don't forget to shut down these devices after using them - otherwise nasty things may happen when you try to boot your OS). So, do not initialize and read the sensors on startup. Signed-off-by: Heiko Schocher <hs(a)denx.de> --- arch/powerpc/lib/board.c | 3 --- common/cmd_dtt.c | 14 ++++++++++++-- drivers/hwmon/adm1021.c | 27 +++------------------------ drivers/hwmon/adt7460.c | 2 +- drivers/hwmon/ds1621.c | 19 +------------------ drivers/hwmon/ds1775.c | 19 +------------------ drivers/hwmon/lm63.c | 19 +------------------ drivers/hwmon/lm73.c | 20 ++------------------ drivers/hwmon/lm75.c | 29 ++--------------------------- drivers/hwmon/lm81.c | 21 ++------------------- include/dtt.h | 2 +- 11 files changed, 26 insertions(+), 149 deletions(-) diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index b21c1d6..f9412a9 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -917,9 +917,6 @@ void board_init_r (gd_t *id, ulong dest_addr) WATCHDOG_RESET (); -#if defined(CONFIG_DTT) /* Digital Thermometers and Thermostats */ - dtt_init (); -#endif #if defined(CONFIG_CMD_SCSI) WATCHDOG_RESET (); puts ("SCSI: "); diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c index 3388e43..37ce4df 100644 --- a/common/cmd_dtt.c +++ b/common/cmd_dtt.c @@ -28,6 +28,8 @@ #include <dtt.h> #include <i2c.h> +static unsigned long sensors_init_done = 0; + int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { int i; @@ -42,8 +44,16 @@ int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) * Loop through sensors, read * temperature, and output it. */ - for (i = 0; i < sizeof (sensors); i++) - printf ("DTT%d: %i C\n", i + 1, dtt_get_temp (sensors[i])); + for (i = 0; i < sizeof (sensors); i++) { + if ((sensors_init_done & (1 << i)) != (1 << i)) { + if (dtt_init_one(sensors[i]) == 0) + sensors_init_done |= (1 << i); + else + printf("DTT%d: Failed init!\n", i); + } + if ((sensors_init_done & (1 << i)) == (1 << i)) + printf ("DTT%d: %i C\n", i + 1, dtt_get_temp(sensors[i])); + } /* switch back to original I2C bus */ I2C_SET_BUS(old_bus); diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index d753e9a..3ef80af 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -109,8 +109,8 @@ dtt_write (int sensor, int reg, int val) return 0; } /* dtt_write() */ -static int -_dtt_init (int sensor) +int +dtt_init_one (int sensor) { dtt_cfg_t *dcp = &dttcfg[sensor >> 1]; int reg, val; @@ -164,28 +164,7 @@ _dtt_init (int sensor) return 1; return 0; -} /* _dtt_init() */ - -int -dtt_init (void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - const char *const header = "DTT: "; - - /* switch to correct I2C bus */ - I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM); - - for (i = 0; i < sizeof(sensors); i++) { - if (_dtt_init(sensors[i]) != 0) - printf ("%s%d FAILED INIT\n", header, i+1); - else - printf ("%s%d is %i C\n", header, i+1, - dtt_get_temp(sensors[i])); - } - - return (0); -} /* dtt_init() */ +} /* dtt_init_one() */ int dtt_get_temp (int sensor) diff --git a/drivers/hwmon/adt7460.c b/drivers/hwmon/adt7460.c index caef70a..b7e36fe 100644 --- a/drivers/hwmon/adt7460.c +++ b/drivers/hwmon/adt7460.c @@ -50,7 +50,7 @@ int dtt_write(int sensor, int reg, int val) return 0; } -int dtt_init(void) +int dtt_init_one(int sensor) { printf("ADT7460 at I2C address 0x%2x\n", ADT7460_ADDRESS); diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index 5a2ea62..4e1db6d 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -126,7 +126,7 @@ int dtt_write(int sensor, int reg, int val) } -static int _dtt_init(int sensor) +int dtt_init_one(int sensor) { int val; @@ -155,23 +155,6 @@ static int _dtt_init(int sensor) return 0; } - -int dtt_init (void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - - for (i = 0; i < sizeof(sensors); i++) { - if (_dtt_init(sensors[i]) != 0) - printf("DTT%d: FAILED\n", i + 1); - else - printf("DTT%d: %i C\n", i + 1, dtt_get_temp(sensors[i])); - } - - return (0); -} - - int dtt_get_temp(int sensor) { int i; diff --git a/drivers/hwmon/ds1775.c b/drivers/hwmon/ds1775.c index 80fb26f..feabdf2 100644 --- a/drivers/hwmon/ds1775.c +++ b/drivers/hwmon/ds1775.c @@ -98,7 +98,7 @@ int dtt_write(int sensor, int reg, int val) } -static int _dtt_init(int sensor) +int dtt_init_one(int sensor) { int val; @@ -133,23 +133,6 @@ static int _dtt_init(int sensor) return 0; } - -int dtt_init (void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - - for (i = 0; i < sizeof(sensors); i++) { - if (_dtt_init(sensors[i]) != 0) - printf("DTT%d: FAILED\n", i+1); - else - printf("DTT%d: %i C\n", i+1, dtt_get_temp(sensors[i])); - } - - return (0); -} - - int dtt_get_temp(int sensor) { return (dtt_read(sensor, DTT_READ_TEMP) / 256); diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c index 03616e1..2e49258 100644 --- a/drivers/hwmon/lm63.c +++ b/drivers/hwmon/lm63.c @@ -93,7 +93,7 @@ int dtt_write(int sensor, int reg, int val) return 0; } /* dtt_write() */ -static int _dtt_init(int sensor) +int dtt_init_one(int sensor) { int i; int val; @@ -155,20 +155,3 @@ int dtt_get_temp(int sensor) /* Ignore LSB for now, U-Boot only prints natural numbers */ return temp >> 8; } - -int dtt_init(void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - const char *const header = "DTT: "; - - for (i = 0; i < sizeof(sensors); i++) { - if (_dtt_init(sensors[i]) != 0) - printf("%s%d FAILED INIT\n", header, i + 1); - else - printf("%s%d is %i C\n", header, i + 1, - dtt_get_temp(sensors[i])); - } - - return 0; -} diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c index 7b5d893..45cc6db 100644 --- a/drivers/hwmon/lm73.c +++ b/drivers/hwmon/lm73.c @@ -112,7 +112,7 @@ int dtt_write(int const sensor, int const reg, int const val) dlen); } /* dtt_write() */ -static int _dtt_init(int const sensor) +int dtt_init_one(int const sensor) { int val; @@ -148,23 +148,7 @@ static int _dtt_init(int const sensor) dtt_read(sensor, DTT_CONTROL); /* clear temperature flags */ return 0; -} /* _dtt_init() */ - -int dtt_init(void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - const char *const header = "DTT: "; - - for (i = 0; i < sizeof(sensors); i++) { - if (0 != _dtt_init(sensors[i])) - printf("%s%d FAILED INIT\n", header, i + 1); - else - printf("%s%d is %i C\n", header, i + 1, - dtt_get_temp(sensors[i])); - } - return 0; -} /* dtt_init() */ +} /* dtt_init_one() */ int dtt_get_temp(int const sensor) { diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index 8119821..29c1a39 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -119,7 +119,7 @@ int dtt_write(int sensor, int reg, int val) } /* dtt_write() */ -static int _dtt_init(int sensor) +int dtt_init_one(int sensor) { int val; @@ -145,32 +145,7 @@ static int _dtt_init(int sensor) return 1; return 0; -} /* _dtt_init() */ - - -int dtt_init (void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - const char *const header = "DTT: "; - int old_bus; - - /* switch to correct I2C bus */ - old_bus = I2C_GET_BUS(); - I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM); - - for (i = 0; i < sizeof(sensors); i++) { - if (_dtt_init(sensors[i]) != 0) - printf("%s%d FAILED INIT\n", header, i+1); - else - printf("%s%d is %i C\n", header, i+1, - dtt_get_temp(sensors[i])); - } - /* switch back to original I2C bus */ - I2C_SET_BUS(old_bus); - - return (0); -} /* dtt_init() */ +} /* dtt_init_one() */ int dtt_get_temp(int sensor) { diff --git a/drivers/hwmon/lm81.c b/drivers/hwmon/lm81.c index afe5b0d..f1572ba 100644 --- a/drivers/hwmon/lm81.c +++ b/drivers/hwmon/lm81.c @@ -89,7 +89,7 @@ int dtt_write(int sensor, int reg, int val) #define DTT_CONFIG 0x40 #define DTT_ADR 0x48 -static int _dtt_init(int sensor) +int dtt_init_one(int sensor) { int man; int adr; @@ -111,26 +111,9 @@ static int _dtt_init(int sensor) debug ("DTT: Found LM81@%x Rev: %d\n", adr, rev); return 0; -} /* _dtt_init() */ +} /* dtt_init_one() */ -int dtt_init (void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - const char *const header = "DTT: "; - - for (i = 0; i < sizeof(sensors); i++) { - if (_dtt_init(sensors[i]) != 0) - printf("%s%d FAILED INIT\n", header, i+1); - else - printf("%s%d is %i C\n", header, i+1, - dtt_get_temp(sensors[i])); - } - - return (0); -} /* dtt_init() */ - #define TEMP_FROM_REG(temp) \ ((temp)<256?((((temp)&0x1fe) >> 1) * 10) + ((temp) & 1) * 5: \ ((((temp)&0x1fe) >> 1) -255) * 10 - ((temp) & 1) * 5) \ diff --git a/include/dtt.h b/include/dtt.h index 399b64a..bbaa033 100644 --- a/include/dtt.h +++ b/include/dtt.h @@ -52,7 +52,7 @@ #endif #endif /* CONFIG_DTT_ADM1021 */ -extern int dtt_init (void); +extern int dtt_init_one (int); extern int dtt_read(int sensor, int reg); extern int dtt_write(int sensor, int reg, int val); extern int dtt_get_temp(int sensor); -- 1.7.2.3

3 20

[U-Boot] [PATCH] ARM: Correct CONFIG_(SYS_)CONSOLE_INFO_QUIET rename ommissions
by Gray Remlin 04 Aug '11

04 Aug '11

Correct some ommissions of renaming CONFIG_CONSOLE_INFO_QUIET to CONFIG_SYS_CONSOLE_INFO_QUIET Signed-off-by: Gray Remlin <gryrmln(a)gmail.com> --- include/configs/edminiv2.h | 2 +- include/configs/km_arm.h | 2 +- include/configs/mv-common.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index a75f06a..7d55db8 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -209,7 +209,7 @@ /* * Other required minimal configurations */ -#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress console details at boot */ #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ #define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ #define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h index bf77cc0..f5c7f53 100644 --- a/include/configs/km_arm.h +++ b/include/configs/km_arm.h @@ -112,7 +112,7 @@ /* * Other required minimal configurations */ -#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress console details at boot */ #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ #define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ #define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index a8937dd..0cf6f1f 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -101,7 +101,7 @@ #define CONFIG_SYS_LONGHELP #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING -#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress console details at boot */ #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ #define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ #define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */ -- 1.7.4

4 4

[U-Boot] [PATCHv2] fsl_ddr: Don't use full 64-bit divides on 32-bit PowerPC
by Kyle Moffett 03 Aug '11

03 Aug '11

The current FreeScale MPC-8xxx DDR SPD interpreter is using full 64-bit integer divide operations to convert between nanoseconds and DDR clock cycles given arbitrary DDR clock frequencies. Since all of the inputs to this are 32-bit (nanoseconds, clock cycles, and DDR frequencies), we can easily restructure the computation to use the "do_div()" function to perform 64-bit/32-bit divide operations. This decreases compute time rather significantly for each conversion and avoids bringing in a very complicated function from libgcc. It should be noted that nothing else in U-Boot or the Linux kernel seems to require a full 64-bit divide on any 32-bit PowerPC. Build-and-boot-tested on the HWW-1U-1A board using DDR2 SPD detection. Signed-off-by: Kyle Moffett <Kyle.D.Moffett(a)boeing.com> Cc: Andy Fleming <afleming(a)gmail.com> Cc: Kumar Gala <kumar.gala(a)freescale.com> Cc: Wolfgang Denk <wd(a)denx.de> Cc: Kim Phillips <kim.phillips(a)freescale.com> --- Ok, so this patch touches a rather sensitive part of the fsl_ddr logic. I spent a fair amount of time trying to verify that the resulting math is exactly the same as it was before, but the consequences of a mistake are insideous timing problems. Additional in-depth review would be much appreciated. Cheers, Kyle Moffett Changelog: v2: Resubmitted separately from the other HWW-1U-1A patches arch/powerpc/cpu/mpc8xxx/ddr/util.c | 58 ++++++++++++++++++++++++---------- 1 files changed, 41 insertions(+), 17 deletions(-) diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c index 1e2d921..c545d59 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c @@ -8,11 +8,19 @@ #include <common.h> #include <asm/fsl_law.h> +#include <div64.h> #include "ddr.h" unsigned int fsl_ddr_get_mem_data_rate(void); +/* To avoid 64-bit full-divides, we factor this here */ +#define ULL_2e12 2000000000000ULL +#define UL_5pow12 244140625UL +#define UL_2pow13 (1UL << 13) + +#define ULL_8Fs 0xFFFFFFFFULL + /* * Round mclk_ps to nearest 10 ps in memory controller code. * @@ -22,36 +30,52 @@ unsigned int fsl_ddr_get_mem_data_rate(void); */ unsigned int get_memory_clk_period_ps(void) { - unsigned int mclk_ps; + unsigned int data_rate = fsl_ddr_get_mem_data_rate(); + unsigned int result; + + /* Round to nearest 10ps, being careful about 64-bit multiply/divide */ + unsigned long long mclk_ps = ULL_2e12; - mclk_ps = 2000000000000ULL / fsl_ddr_get_mem_data_rate(); - /* round to nearest 10 ps */ - return 10 * ((mclk_ps + 5) / 10); + /* Add 5*data_rate, for rounding */ + mclk_ps += 5*(unsigned long long)data_rate; + + /* Now perform the big divide, the result fits in 32-bits */ + do_div(mclk_ps, data_rate); + result = mclk_ps; + + /* We still need to round to 10ps */ + return 10 * (result/10); } /* Convert picoseconds into DRAM clock cycles (rounding up if needed). */ unsigned int picos_to_mclk(unsigned int picos) { - const unsigned long long ULL_2e12 = 2000000000000ULL; - const unsigned long long ULL_8Fs = 0xFFFFFFFFULL; - unsigned long long clks; - unsigned long long clks_temp; + unsigned long long clks, clks_rem; + /* Short circuit for zero picos */ if (!picos) return 0; - clks = fsl_ddr_get_mem_data_rate() * (unsigned long long) picos; - clks_temp = clks; - clks = clks / ULL_2e12; - if (clks_temp % ULL_2e12) { + /* First multiply the time by the data rate (32x32 => 64) */ + clks = picos * (unsigned long long)fsl_ddr_get_mem_data_rate(); + + /* + * Now divide by 5^12 and track the 32-bit remainder, then divide + * by 2*(2^12) using shifts (and updating the remainder). + */ + clks_rem = do_div(clks, UL_5pow12); + clks_rem <<= 13; + clks_rem |= clks & (UL_2pow13-1); + clks >>= 13; + + /* If we had a remainder, then round up */ + if (clks_rem) clks++; - } - if (clks > ULL_8Fs) { + /* Clamp to the maximum representable value */ + if (clks > ULL_8Fs) clks = ULL_8Fs; - } - - return (unsigned int) clks; + return (unsigned int)clks; } unsigned int mclk_to_picos(unsigned int mclk) -- 1.7.2.3

5 19

[U-Boot] [PATCH 00/22] U-Boot MMC SPL for OMAP4
by Aneesh V 02 Aug '11

02 Aug '11

This series adds mmc SPL support for OMAP4. This is essentially an up-streaming effort for TI's x-loader for OMAP4 using the SPL framework This work partly draws upon previous work done for x-loader by: Santosh Shilimkar <santosh.shilimkar(a)ti.com> Rajendra Nayak <rnayak(a)ti.com> and many others Features supported: * Clock init - DPLL locking, clock domains/modules enabling * SDRAM/DMM initialization * Mux initialization * MMC raw read support * MMC FAT read support Improvments over x-loader: * Code completely revamped * DPLL programming that works for all SYS_CLK frequencies * Automatic SDRAM identification and initialization * Board dependent parts(especially mux) deferred to u-boot. So, same SPL will work for Panda and SDP and most likely on any other board that comes along * Determination of u-boot size to avoid reading extra content while loading U-Boot * Modular apporach to enable future addition of support for all OMAP3/4 platforms Aneesh V (21): omap: add miscellaneous utility macros for bit-field operations omap4: add OMAP4430 revision check armv7: start.S: provide a hook for saving boot params omap4: save parameters passed by ROM code to SPL arm: new labels in the linker script file Add generic spl infrastructure armv7: start.S: add SPL support omap: add spl support omap4: add spl support for OMAP4 SDP omap4: add serial console support to SPL omap4: utility function to identify the context of hw init omap4: separate mux settings into essential and non essential parts omap4: correct mux data for sdp4430 omap4: add clock support omap4: add sdram init support omap4: calculate EMIF register values omap4: automatic sdram detection armv7: embed u-boot size within u-boot for use from SPL omap: add MMC support to SPL omap: spl: add FAT support over MMC omap4: add spl support for OMAP4 Panda John Rigby (1): mkimage: Add OMAP boot image support Makefile | 11 + arch/arm/cpu/armv7/cpu.c | 7 + arch/arm/cpu/armv7/omap-common/Makefile | 1 + .../{omap4/lowlevel_init.S => omap-common/utils.c} | 58 +- arch/arm/cpu/armv7/omap4/Makefile | 3 + arch/arm/cpu/armv7/omap4/board.c | 117 ++- arch/arm/cpu/armv7/omap4/clocks.c | 717 +++++++++++ arch/arm/cpu/armv7/omap4/emif.c | 1303 ++++++++++++++++++++ arch/arm/cpu/armv7/omap4/lowlevel_init.S | 31 + arch/arm/cpu/armv7/omap4/omap4_mux_data.h | 76 ++ arch/arm/cpu/armv7/omap4/sdram_elpida.c | 267 ++++ arch/arm/cpu/armv7/start.S | 50 +- arch/arm/cpu/armv7/u-boot.lds | 4 + arch/arm/include/asm/arch-omap4/clocks.h | 504 ++++++++ arch/arm/include/asm/arch-omap4/emif.h | 1021 +++++++++++++++ arch/arm/include/asm/arch-omap4/omap4.h | 50 +- arch/arm/include/asm/arch-omap4/sys_proto.h | 60 +- .../omap4/lowlevel_init.S => include/asm/armv7.h} | 32 +- arch/arm/include/asm/global_data.h | 5 + arch/arm/include/asm/omap_common.h | 106 ++ board/ti/panda/panda.c | 25 +- board/ti/{sdp4430/sdp.h => panda/panda_mux_data.h} | 76 +- board/ti/sdp4430/config.mk | 3 +- board/ti/sdp4430/sdp.c | 25 +- .../{panda/panda.h => sdp4430/sdp4430_mux_data.h} | 128 +-- common/image.c | 1 + include/configs/omap4_panda.h | 24 + include/configs/omap4_sdp4430.h | 24 + include/image.h | 1 + spl/board/ti/panda/Makefile | 219 ++++ spl/board/ti/sdp4430/Makefile | 219 ++++ spl/board/ti/spl-omap.c | 189 +++ .../armv7/u-boot.lds => spl/board/ti/spl-omap.lds | 70 +- tools/Makefile | 2 + tools/mkimage.c | 2 + tools/mkimage.h | 1 + tools/omapimage.c | 229 ++++ .../omap4/lowlevel_init.S => tools/omapimage.h | 49 +- 38 files changed, 5390 insertions(+), 320 deletions(-) copy arch/arm/cpu/armv7/{omap4/lowlevel_init.S => omap-common/utils.c} (50%) create mode 100644 arch/arm/cpu/armv7/omap4/clocks.c create mode 100644 arch/arm/cpu/armv7/omap4/emif.c create mode 100644 arch/arm/cpu/armv7/omap4/omap4_mux_data.h create mode 100644 arch/arm/cpu/armv7/omap4/sdram_elpida.c create mode 100644 arch/arm/include/asm/arch-omap4/clocks.h create mode 100644 arch/arm/include/asm/arch-omap4/emif.h copy arch/arm/{cpu/armv7/omap4/lowlevel_init.S => include/asm/armv7.h} (62%) create mode 100644 arch/arm/include/asm/omap_common.h rename board/ti/{sdp4430/sdp.h => panda/panda_mux_data.h} (76%) rename board/ti/{panda/panda.h => sdp4430/sdp4430_mux_data.h} (67%) create mode 100644 spl/board/ti/panda/Makefile create mode 100644 spl/board/ti/sdp4430/Makefile create mode 100644 spl/board/ti/spl-omap.c copy arch/arm/cpu/armv7/u-boot.lds => spl/board/ti/spl-omap.lds (57%) create mode 100644 tools/omapimage.c copy arch/arm/cpu/armv7/omap4/lowlevel_init.S => tools/omapimage.h (53%)

15 240

[U-Boot] [PATCH 1/2] powerpc/85xx: Update timer-frequency prop in ptp_timer node of device tree
by Kumar Gala 27 Jul '11

27 Jul '11

From: bhaskar upadhaya <Bhaskar.Upadhaya(a)freescale.com> Fix up the device tree property associated with the IEEE 1588 timer source frequency. Currently we only support the IEEE 1588 timer source being the internal eTSEC system clock (for those SoCs with IEEE 1588 support). The eTSEC clock is ccb_clk/2. Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya(a)freescale.com> Signed-off-by: Kumar Gala <galak(a)kernel.crashing.org> --- arch/powerpc/cpu/mpc85xx/fdt.c | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 6ed0284..642f6c5 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -486,4 +486,13 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CONFIG_SYS_SRIO ft_srio_setup(blob); #endif + + /* + * system-clock = CCB clock/2 + * Here gd->bus_clk = CCB clock + * We are using the system clock as 1588 Timer reference + * clock source select + */ + do_fixup_by_compat_u32(blob, "fsl,gianfar-ptp-timer", + "timer-frequency", gd->bus_clk/2, 1); } -- 1.7.2.3

1 2

[U-Boot] [PATCH v4 1/8] MX5: Add initial support for MX53 processor
by Jason Liu 13 Jul '11

13 Jul '11

Add initial support for Freescale MX53 processor, - Add the iomux support and the pin definition, - Add the regs definition, clean up some unused def from mx51, - Add the low level init support, make use the freq input of setup_pll macro --- Changes for v2: -address some comments of Stefano Babic, remove the is_soc_type and use #ifdef, -address the comments of stefano, remove CPU_TYPE def, remove something like /*0x760*/ comments in mx5x_pins.h. -fix the build break for vision2 board Changes for v3: -address some comments of Stefano -fix the offset of CLKCTL_CMEOR offset of MX53 -remove #define GPIO_PORT_NUM 4, not used now Signed-off-by: Jason Liu <r64343(a)freescale.com> --- arch/arm/cpu/armv7/mx5/iomux.c | 30 ++- arch/arm/cpu/armv7/mx5/lowlevel_init.S | 91 +++--- arch/arm/cpu/armv7/mx5/soc.c | 22 +- arch/arm/include/asm/arch-mx5/asm-offsets.h | 5 + arch/arm/include/asm/arch-mx5/imx-regs.h | 82 ++--- arch/arm/include/asm/arch-mx5/iomux.h | 102 ------ arch/arm/include/asm/arch-mx5/mx5x_pins.h | 469 ++++++++++++++++++++++++++- include/configs/mx51evk.h | 3 +- include/configs/vision2.h | 3 +- 9 files changed, 599 insertions(+), 208 deletions(-) diff --git a/arch/arm/cpu/armv7/mx5/iomux.c b/arch/arm/cpu/armv7/mx5/iomux.c old mode 100644 new mode 100755 index e8928d5..d4e3bbb --- a/arch/arm/cpu/armv7/mx5/iomux.c +++ b/arch/arm/cpu/armv7/mx5/iomux.c @@ -34,7 +34,7 @@ enum iomux_reg_addr { IOMUXSW_MUX_CTL = IOMUXC_BASE_ADDR, IOMUXSW_MUX_END = IOMUXC_BASE_ADDR + MUX_I_END, IOMUXSW_PAD_CTL = IOMUXC_BASE_ADDR + PAD_I_START, - IOMUXSW_INPUT_CTL = IOMUXC_BASE_ADDR, + IOMUXSW_INPUT_CTL = IOMUXC_BASE_ADDR + INPUT_CTL_START, }; #define MUX_PIN_NUM_MAX (((MUX_I_END - MUX_I_START) >> 2) + 1) @@ -44,11 +44,12 @@ static inline u32 get_mux_reg(iomux_pin_name_t pin) { u32 mux_reg = PIN_TO_IOMUX_MUX(pin); +#if defined(CONFIG_MX51) if (is_soc_rev(CHIP_REV_2_0) < 0) { /* * Fixup register address: - * i.MX51 TO1 has offset with the register - * which is define as TO2. + * i.MX51 TO1 has offset with the register + * which is define as TO2. */ if ((pin == MX51_PIN_NANDF_RB5) || (pin == MX51_PIN_NANDF_RB6) || @@ -59,6 +60,7 @@ static inline u32 get_mux_reg(iomux_pin_name_t pin) else if (mux_reg >= 0x130) mux_reg += 0xC; } +#endif mux_reg += IOMUXSW_MUX_CTL; return mux_reg; } @@ -68,11 +70,12 @@ static inline u32 get_pad_reg(iomux_pin_name_t pin) { u32 pad_reg = PIN_TO_IOMUX_PAD(pin); +#if defined(CONFIG_MX51) if (is_soc_rev(CHIP_REV_2_0) < 0) { /* * Fixup register address: - * i.MX51 TO1 has offset with the register - * which is define as TO2. + * i.MX51 TO1 has offset with the register + * which is define as TO2. */ if ((pin == MX51_PIN_NANDF_RB5) || (pin == MX51_PIN_NANDF_RB6) || @@ -91,6 +94,7 @@ static inline u32 get_pad_reg(iomux_pin_name_t pin) else pad_reg += 8; } +#endif pad_reg += IOMUXSW_PAD_CTL; return pad_reg; } @@ -98,10 +102,13 @@ static inline u32 get_pad_reg(iomux_pin_name_t pin) /* Get the last iomux register address */ static inline u32 get_mux_end(void) { +#if defined(CONFIG_MX51) if (is_soc_rev(CHIP_REV_2_0) < 0) return IOMUXC_BASE_ADDR + (0x3F8 - 4); else return IOMUXC_BASE_ADDR + (0x3F0 - 4); +#endif + return IOMUXSW_MUX_END; } /* @@ -164,3 +171,16 @@ unsigned int mxc_iomux_get_pad(iomux_pin_name_t pin) u32 pad_reg = get_pad_reg(pin); return readl(pad_reg); } + +/* + * This function configures daisy-chain + * + * @param input index of input select register + * @param config the binary value of elements + */ +void mxc_iomux_set_input(iomux_input_select_t input, u32 config) +{ + u32 reg = IOMUXSW_INPUT_CTL + (input << 2); + + writel(config, reg); +} diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S old mode 100644 new mode 100755 index e984870..96ebfe2 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -70,6 +70,7 @@ /* M4IF setup */ .macro init_m4if +#ifdef CONFIG_MX51 /* VPU and IPU given higher priority (0x4) * IPU accesses with ID=0x1 given highest priority (=0xA) */ @@ -87,27 +88,31 @@ ldr r1, =0x001901A3 str r1, [r0, #0x48] +#endif .endm /* init_m4if */ .macro setup_pll pll, freq - ldr r2, =\pll + ldr r0, =\pll ldr r1, =0x00001232 - str r1, [r2, #PLL_DP_CTL] /* Set DPLL ON (set UPEN bit): BRMO=1 */ + str r1, [r0, #PLL_DP_CTL] /* Set DPLL ON (set UPEN bit): BRMO=1 */ mov r1, #0x2 - str r1, [r2, #PLL_DP_CONFIG] /* Enable auto-restart AREN bit */ + str r1, [r0, #PLL_DP_CONFIG] /* Enable auto-restart AREN bit */ - str r3, [r2, #PLL_DP_OP] - str r3, [r2, #PLL_DP_HFS_OP] + ldr r1, W_DP_OP_\freq + str r1, [r0, #PLL_DP_OP] + str r1, [r0, #PLL_DP_HFS_OP] - str r4, [r2, #PLL_DP_MFD] - str r4, [r2, #PLL_DP_HFS_MFD] + ldr r1, W_DP_MFD_\freq + str r1, [r0, #PLL_DP_MFD] + str r1, [r0, #PLL_DP_HFS_MFD] - str r5, [r2, #PLL_DP_MFN] - str r5, [r2, #PLL_DP_HFS_MFN] + ldr r1, W_DP_MFN_\freq + str r1, [r0, #PLL_DP_MFN] + str r1, [r0, #PLL_DP_HFS_MFN] ldr r1, =0x00001232 - str r1, [r2, #PLL_DP_CTL] -1: ldr r1, [r2, #PLL_DP_CTL] + str r1, [r0, #PLL_DP_CTL] +1: ldr r1, [r0, #PLL_DP_CTL] ands r1, r1, #0x1 beq 1b .endm @@ -115,6 +120,7 @@ .macro init_clock ldr r0, =CCM_BASE_ADDR +#if defined(CONFIG_MX51) /* Gate of clocks to the peripherals first */ ldr r1, =0x3FFFFFFF str r1, [r0, #CLKCTL_CCGR0] @@ -141,19 +147,16 @@ 1: ldr r1, [r0, #CLKCTL_CDHIPR] cmp r1, #0x0 bne 1b +#endif /* Switch ARM to step clock */ mov r1, #0x4 str r1, [r0, #CLKCTL_CCSR] - mov r3, #DP_OP_800 - mov r4, #DP_MFD_800 - mov r5, #DP_MFN_800 - setup_pll PLL1_BASE_ADDR - mov r3, #DP_OP_665 - mov r4, #DP_MFD_665 - mov r5, #DP_MFN_665 - setup_pll PLL3_BASE_ADDR + setup_pll PLL1_BASE_ADDR, 800 + +#if defined(CONFIG_MX51) + setup_pll PLL3_BASE_ADDR, 665 /* Switch peripheral to PLL 3 */ ldr r0, =CCM_BASE_ADDR @@ -162,10 +165,7 @@ str r1, [r0, #CLKCTL_CBCMR] ldr r1, =0x13239145 str r1, [r0, #CLKCTL_CBCDR] - mov r3, #DP_OP_665 - mov r4, #DP_MFD_665 - mov r5, #DP_MFN_665 - setup_pll PLL2_BASE_ADDR + setup_pll PLL2_BASE_ADDR, 665 /* Switch peripheral to PLL2 */ ldr r0, =CCM_BASE_ADDR @@ -174,12 +174,8 @@ ldr r1, =0x000020C0 orr r1,r1,#CONFIG_SYS_DDR_CLKSEL str r1, [r0, #CLKCTL_CBCMR] - - mov r3, #DP_OP_216 - mov r4, #DP_MFD_216 - mov r5, #DP_MFN_216 - setup_pll PLL3_BASE_ADDR - +#endif + setup_pll PLL3_BASE_ADDR, 216 /* Set the platform clock dividers */ ldr r0, =ARM_BASE_ADDR @@ -188,18 +184,23 @@ ldr r0, =CCM_BASE_ADDR +#if defined(CONFIG_MX51) /* Run 3.0 at Full speed, for other TO's wait till we increase VDDGP */ ldr r1, =0x0 ldr r3, [r1, #ROM_SI_REV] cmp r3, #0x10 movls r1, #0x1 movhi r1, #0 - str r1, [r0, #CLKCTL_CACRR] +#else + mov r1, #0 +#endif + str r1, [r0, #CLKCTL_CACRR] /* Switch ARM back to PLL 1 */ mov r1, #0 str r1, [r0, #CLKCTL_CCSR] +#if defined(CONFIG_MX51) /* setup the rest */ /* Use lp_apm (24MHz) source for perclk */ ldr r1, =0x000020C2 @@ -208,6 +209,7 @@ /* ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz */ ldr r1, =CONFIG_SYS_CLKTL_CBCDR str r1, [r0, #CLKCTL_CBCDR] +#endif /* Restore the default values in the Gate registers */ ldr r1, =0xFFFFFFFF @@ -218,13 +220,23 @@ str r1, [r0, #CLKCTL_CCGR4] str r1, [r0, #CLKCTL_CCGR5] str r1, [r0, #CLKCTL_CCGR6] +#if defined(CONFIG_MX53) + str r1, [r0, #CLKCTL_CCGR7] +#endif +#if defined(CONFIG_MX51) /* Use PLL 2 for UART's, get 66.5MHz from it */ ldr r1, =0xA5A2A020 str r1, [r0, #CLKCTL_CSCMR1] ldr r1, =0x00C30321 str r1, [r0, #CLKCTL_CSCDR1] - +#elif defined(CONFIG_MX53) + ldr r1, [r0, #CLKCTL_CSCDR1] + orr r1, r1, #0x3f + eor r1, r1, #0x3f + orr r1, r1, #0x21 + str r1, [r0, #CLKCTL_CSCDR1] +#endif /* make sure divider effective */ 1: ldr r1, [r0, #CLKCTL_CDHIPR] cmp r1, #0x0 @@ -249,6 +261,7 @@ .globl lowlevel_init lowlevel_init: +#if defined(CONFIG_MX51) ldr r0, =GPIO1_BASE_ADDR ldr r1, [r0, #0x0] orr r1, r1, #(1 << 23) @@ -256,6 +269,7 @@ lowlevel_init: ldr r1, [r0, #0x4] orr r1, r1, #(1 << 23) str r1, [r0, #0x4] +#endif init_l2cc @@ -269,9 +283,12 @@ lowlevel_init: mov pc,lr /* Board level setting value */ -DDR_PERCHARGE_CMD: .word 0x04008008 -DDR_REFRESH_CMD: .word 0x00008010 -DDR_LMR1_W: .word 0x00338018 -DDR_LMR_CMD: .word 0xB2220000 -DDR_TIMING_W: .word 0xB02567A9 -DDR_MISC_W: .word 0x000A0104 +W_DP_OP_800: .word DP_OP_800 +W_DP_MFD_800: .word DP_MFD_800 +W_DP_MFN_800: .word DP_MFN_800 +W_DP_OP_665: .word DP_OP_665 +W_DP_MFD_665: .word DP_MFD_665 +W_DP_MFN_665: .word DP_MFN_665 +W_DP_OP_216: .word DP_OP_216 +W_DP_MFD_216: .word DP_MFD_216 +W_DP_MFN_216: .word DP_MFN_216 diff --git a/arch/arm/cpu/armv7/mx5/soc.c b/arch/arm/cpu/armv7/mx5/soc.c index 2900119..09500b3 100644 --- a/arch/arm/cpu/armv7/mx5/soc.c +++ b/arch/arm/cpu/armv7/mx5/soc.c @@ -33,17 +33,20 @@ #include <fsl_esdhc.h> #endif -#if defined(CONFIG_MX51) -#define CPU_TYPE 0x51000 -#else +#if !(defined(CONFIG_MX51) || defined(CONFIG_MX53)) #error "CPU_TYPE not defined" #endif u32 get_cpu_rev(void) { - int system_rev = CPU_TYPE; +#ifdef CONFIG_MX51 + int system_rev = 0x51000; +#else + int system_rev = 0x53000; +#endif int reg = __raw_readl(ROM_SI_REV); +#if defined(CONFIG_MX51) switch (reg) { case 0x02: system_rev |= CHIP_REV_1_1; @@ -57,11 +60,20 @@ u32 get_cpu_rev(void) case 0x20: system_rev |= CHIP_REV_3_0; break; - return system_rev; default: system_rev |= CHIP_REV_1_0; break; } +#else + switch (reg) { + case 0x20: + system_rev |= CHIP_REV_2_0; + break; + default: + system_rev |= CHIP_REV_1_0; + break; + } +#endif return system_rev; } diff --git a/arch/arm/include/asm/arch-mx5/asm-offsets.h b/arch/arm/include/asm/arch-mx5/asm-offsets.h index afd2728..793f69c 100644 --- a/arch/arm/include/asm/arch-mx5/asm-offsets.h +++ b/arch/arm/include/asm/arch-mx5/asm-offsets.h @@ -37,7 +37,12 @@ #define CLKCTL_CCGR4 0x78 #define CLKCTL_CCGR5 0x7C #define CLKCTL_CCGR6 0x80 +#if defined(CONFIG_MX53) +#define CLKCTL_CCGR7 0x84 +#define CLKCTL_CMEOR 0x88 +#elif defined(CONFIG_MX51) #define CLKCTL_CMEOR 0x84 +#endif /* DPLL */ #define PLL_DP_CTL 0x00 diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h old mode 100644 new mode 100755 index b45026d..09b69f6 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -20,38 +20,36 @@ * MA 02111-1307 USA */ -#ifndef __ASM_ARCH_MXC_MX51_H__ -#define __ASM_ARCH_MXC_MX51_H__ +#ifndef __ASM_ARCH_MX5_IMX_REGS_H__ +#define __ASM_ARCH_MX5_IMX_REGS_H__ -/* - * IRAM - */ +#if defined(CONFIG_MX51) #define IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */ -#define IRAM_SIZE 0x00020000 /* 128 KB */ -/* - * Graphics Memory of GPU - */ -#define GPU_BASE_ADDR 0x20000000 -#define GPU_CTRL_BASE_ADDR 0x30000000 #define IPU_CTRL_BASE_ADDR 0x40000000 -/* - * Debug - */ -#define DEBUG_BASE_ADDR 0x60000000 -#define ETB_BASE_ADDR (DEBUG_BASE_ADDR + 0x00001000) -#define ETM_BASE_ADDR (DEBUG_BASE_ADDR + 0x00002000) -#define TPIU_BASE_ADDR (DEBUG_BASE_ADDR + 0x00003000) -#define CTI0_BASE_ADDR (DEBUG_BASE_ADDR + 0x00004000) -#define CTI1_BASE_ADDR (DEBUG_BASE_ADDR + 0x00005000) -#define CTI2_BASE_ADDR (DEBUG_BASE_ADDR + 0x00006000) -#define CTI3_BASE_ADDR (DEBUG_BASE_ADDR + 0x00007000) -#define CORTEX_DBG_BASE_ADDR (DEBUG_BASE_ADDR + 0x00008000) +#define SPBA0_BASE_ADDR 0x70000000 +#define AIPS1_BASE_ADDR 0x73F00000 +#define AIPS2_BASE_ADDR 0x83F00000 +#define CSD0_BASE_ADDR 0x90000000 +#define CSD1_BASE_ADDR 0xA0000000 +#define NFC_BASE_ADDR_AXI 0xCFFF0000 +#elif defined(CONFIG_MX53) +#define IPU_CTRL_BASE_ADDR 0x18000000 +#define SPBA0_BASE_ADDR 0x50000000 +#define AIPS1_BASE_ADDR 0x53F00000 +#define AIPS2_BASE_ADDR 0x63F00000 +#define CSD0_BASE_ADDR 0x70000000 +#define CSD1_BASE_ADDR 0xB0000000 +#define NFC_BASE_ADDR_AXI 0xF7FF0000 +#define IRAM_BASE_ADDR 0xF8000000 +#else +#error "CPU_TYPE not defined" +#endif + +#define IRAM_SIZE 0x00020000 /* 128 KB */ /* * SPBA global module enabled #0 */ -#define SPBA0_BASE_ADDR 0x70000000 - #define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000) #define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000) #define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000) @@ -68,8 +66,6 @@ /* * AIPS 1 */ -#define AIPS1_BASE_ADDR 0x73F00000 - #define OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000) #define GPIO1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000) #define GPIO2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000) @@ -91,11 +87,14 @@ #define CCM_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D4000) #define GPC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D8000) +#if defined(CONFIG_MX53) +#define GPIO5_BASE_ADDR (AIPS1_BASE_ADDR + 0x000DC000) +#define GPIO6_BASE_ADDR (AIPS1_BASE_ADDR + 0x000E0000) +#define GPIO7_BASE_ADDR (AIPS1_BASE_ADDR + 0x000E4000) +#endif /* * AIPS 2 */ -#define AIPS2_BASE_ADDR 0x83F00000 - #define PLL1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000) #define PLL2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00084000) #define PLL3_BASE_ADDR (AIPS2_BASE_ADDR + 0x00088000) @@ -129,30 +128,7 @@ #define VPU_BASE_ADDR (AIPS2_BASE_ADDR + 0x000F4000) #define SAHARA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000F8000) -#define TZIC_BASE_ADDR 0x8FFFC000 - /* - * Memory regions and CS - */ -#define CSD0_BASE_ADDR 0x90000000 -#define CSD1_BASE_ADDR 0xA0000000 -#define CS0_BASE_ADDR 0xB0000000 -#define CS1_BASE_ADDR 0xB8000000 -#define CS2_BASE_ADDR 0xC0000000 -#define CS3_BASE_ADDR 0xC8000000 -#define CS4_BASE_ADDR 0xCC000000 -#define CS5_BASE_ADDR 0xCE000000 - -/* - * NFC - */ -#define NFC_BASE_ADDR_AXI 0xCFFF0000 /* NAND flash AXI */ - -/*! - * Number of GPIO port as defined in the IC Spec - */ -#define GPIO_PORT_NUM 4 -/*! * Number of GPIO pins per port */ #define GPIO_NUM_PIN 32 @@ -311,4 +287,4 @@ struct fuse_bank1_regs { #endif /* __ASSEMBLER__*/ -#endif /* __ASM_ARCH_MXC_MX51_H__ */ +#endif /* __ASM_ARCH_MX5_IMX_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-mx5/iomux.h b/arch/arm/include/asm/arch-mx5/iomux.h index 0d91a24..760371b 100644 --- a/arch/arm/include/asm/arch-mx5/iomux.h +++ b/arch/arm/include/asm/arch-mx5/iomux.h @@ -70,108 +70,6 @@ typedef enum iomux_pad_config { PAD_CTL_DRV_VOT_HIGH = 0x1 << 13,/* High voltage mode */ } iomux_pad_config_t; -/* various IOMUX input select register index */ -typedef enum iomux_input_select { - MUX_IN_AUDMUX_P4_INPUT_DA_AMX_SELECT_I = 0, - MUX_IN_AUDMUX_P4_INPUT_DB_AMX_SELECT_I, - MUX_IN_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P4_INPUT_TXFS_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P5_INPUT_DA_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P5_INPUT_DB_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P5_INPUT_RXCLK_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P5_INPUT_RXFS_AMX_SELECT, - MUX_IN_AUDMUX_P5_INPUT_TXCLK_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P5_INPUT_TXFS_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P6_INPUT_DA_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P6_INPUT_DB_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P6_INPUT_RXCLK_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P6_INPUT_RXFS_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P6_INPUT_TXCLK_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P6_INPUT_TXFS_AMX_SELECT_INPUT, - MUX_IN_CCM_IPP_DI_CLK_SELECT_INPUT, - /* TO2 */ - MUX_IN_CCM_IPP_DI1_CLK_SELECT_INPUT, - MUX_IN_CCM_PLL1_BYPASS_CLK_SELECT_INPUT, - MUX_IN_CCM_PLL2_BYPASS_CLK_SELECT_INPUT, - MUX_IN_CSPI_IPP_CSPI_CLK_IN_SELECT_INPUT, - MUX_IN_CSPI_IPP_IND_MISO_SELECT_INPUT, - MUX_IN_CSPI_IPP_IND_MOSI_SELECT_INPUT, - MUX_IN_CSPI_IPP_IND_SS_B_1_SELECT_INPUT, - MUX_IN_CSPI_IPP_IND_SS_B_2_SELECT_INPUT, - MUX_IN_CSPI_IPP_IND_SS_B_3_SELECT_INPUT, - MUX_IN_DPLLIP1_L1T_TOG_EN_SELECT_INPUT, - /* TO2 */ - MUX_IN_ECSPI2_IPP_IND_SS_B_1_SELECT_INPUT, - MUX_IN_ECSPI2_IPP_IND_SS_B_3_SELECT_INPUT, - MUX_IN_EMI_IPP_IND_RDY_INT_SELECT_INPUT, - MUX_IN_ESDHC3_IPP_DAT0_IN_SELECT_INPUT, - MUX_IN_ESDHC3_IPP_DAT1_IN_SELECT_INPUT, - MUX_IN_ESDHC3_IPP_DAT2_IN_SELECT_INPUT, - MUX_IN_ESDHC3_IPP_DAT3_IN_SELECT_INPUT, - MUX_IN_FEC_FEC_COL_SELECT_INPUT, - MUX_IN_FEC_FEC_CRS_SELECT_INPUT, - MUX_IN_FEC_FEC_MDI_SELECT_INPUT, - MUX_IN_FEC_FEC_RDATA_0_SELECT_INPUT, - MUX_IN_FEC_FEC_RDATA_1_SELECT_INPUT, - MUX_IN_FEC_FEC_RDATA_2_SELECT_INPUT, - MUX_IN_FEC_FEC_RDATA_3_SELECT_INPUT, - MUX_IN_FEC_FEC_RX_CLK_SELECT_INPUT, - MUX_IN_FEC_FEC_RX_DV_SELECT_INPUT, - MUX_IN_FEC_FEC_RX_ER_SELECT_INPUT, - MUX_IN_FEC_FEC_TX_CLK_SELECT_INPUT, - MUX_IN_GPIO3_IPP_IND_G_IN_1_SELECT_INPUT, - MUX_IN_GPIO3_IPP_IND_G_IN_2_SELECT_INPUT, - MUX_IN_GPIO3_IPP_IND_G_IN_3_SELECT_INPUT, - MUX_IN_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT, - MUX_IN_GPIO3_IPP_IND_G_IN_5_SELECT_INPUT, - MUX_IN_GPIO3_IPP_IND_G_IN_6_SELECT_INPUT, - MUX_IN_GPIO3_IPP_IND_G_IN_7_SELECT_INPUT, - MUX_IN_GPIO3_IPP_IND_G_IN_8_SELECT_INPUT, - /* TO2 */ - MUX_IN_GPIO3_IPP_IND_G_IN_12_SELECT_INPUT, - MUX_IN_HSC_MIPI_MIX_IPP_IND_SENS1_DATA_EN_SELECT_INPUT, - MUX_IN_HSC_MIPI_MIX_IPP_IND_SENS2_DATA_EN_SELECT_INPUT, - /* TO2 */ - MUX_IN_HSC_MIPI_MIX_PAR_VSYNC_SELECT_INPUT, - /* TO2 */ - MUX_IN_HSC_MIPI_MIX_PAR_DI_WAIT_SELECT_INPUT, - MUX_IN_HSC_MIPI_MIX_PAR_SISG_TRIG_SELECT_INPUT, - MUX_IN_I2C1_IPP_SCL_IN_SELECT_INPUT, - MUX_IN_I2C1_IPP_SDA_IN_SELECT_INPUT, - MUX_IN_I2C2_IPP_SCL_IN_SELECT_INPUT, - MUX_IN_I2C2_IPP_SDA_IN_SELECT_INPUT, - - MUX_IN_IPU_IPP_DI_0_IND_DISPB_SD_D_SELECT_INPUT, - - MUX_IN_IPU_IPP_DI_1_IND_DISPB_SD_D_SELECT_INPUT, - - MUX_IN_KPP_IPP_IND_COL_6_SELECT_INPUT, - MUX_IN_KPP_IPP_IND_COL_7_SELECT_INPUT, - MUX_IN_KPP_IPP_IND_ROW_4_SELECT_INPUT, - MUX_IN_KPP_IPP_IND_ROW_5_SELECT_INPUT, - MUX_IN_KPP_IPP_IND_ROW_6_SELECT_INPUT, - MUX_IN_KPP_IPP_IND_ROW_7_SELECT_INPUT, - MUX_IN_UART1_IPP_UART_RTS_B_SELECT_INPUT, - MUX_IN_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, - MUX_IN_UART2_IPP_UART_RTS_B_SELECT_INPUT, - MUX_IN_UART2_IPP_UART_RXD_MUX_SELECT_INPUT, - MUX_IN_UART3_IPP_UART_RTS_B_SELECT_INPUT, - MUX_IN_UART3_IPP_UART_RXD_MUX_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_CLK_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_DATA_0_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_DATA_1_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_DATA_2_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_DATA_3_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_DATA_4_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_DATA_5_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_DATA_6_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_DATA_7_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_DIR_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_NXT_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_STP_SELECT_INPUT, - MUX_INPUT_NUM_MUX, -} iomux_input_select_t; - /* various IOMUX input functions */ typedef enum iomux_input_config { INPUT_CTL_PATH0 = 0x0, diff --git a/arch/arm/include/asm/arch-mx5/mx5x_pins.h b/arch/arm/include/asm/arch-mx5/mx5x_pins.h old mode 100644 new mode 100755 index a564fce..4e3a31b --- a/arch/arm/include/asm/arch-mx5/mx5x_pins.h +++ b/arch/arm/include/asm/arch-mx5/mx5x_pins.h @@ -86,12 +86,22 @@ #define PIN_TO_PAD_MASK ((1 << (GPIO_I - PAD_I)) - 1) #define PIN_TO_ALT_GPIO_MASK ((1 << (MUX_IO_I - GPIO_I)) - 1) -#define NON_MUX_I PIN_TO_MUX_MASK +#define NON_MUX_I PIN_TO_MUX_MASK +#define NON_PAD_I PIN_TO_PAD_MASK + +#if defined(CONFIG_MX51) #define MUX_I_START 0x001C #define PAD_I_START 0x3F0 #define INPUT_CTL_START 0x8C4 -#define INPUT_CTL_START_TO1 0x928 #define MUX_I_END (PAD_I_START - 4) +#elif defined(CONFIG_MX53) +#define MUX_I_START 0x0020 +#define PAD_I_START 0x348 +#define INPUT_CTL_START 0x730 +#define MUX_I_END (PAD_I_START - 4) +#else +#error "CPU_TYPE not defined" +#endif #define _MXC_BUILD_PIN(gp, gi, ga, mi, pi) \ (((gp) << MUX_IO_P) | ((gi) << MUX_IO_I) | \ @@ -115,7 +125,7 @@ * "sw_pad_ctl & sw_mux_ctl details" of the MX51 IC Spec. Each enumerated * value is constructed based on the rules described above. */ -enum iomux_pins { +enum { MX51_PIN_EIM_DA0 = _MXC_BUILD_NON_GPIO_PIN(0x1C, 0x7A8), MX51_PIN_EIM_DA1 = _MXC_BUILD_NON_GPIO_PIN(0x20, 0x7A8), MX51_PIN_EIM_DA2 = _MXC_BUILD_NON_GPIO_PIN(0x24, 0x7A8), @@ -414,5 +424,458 @@ enum iomux_pins { MX51_PIN_CTL_DRAM_DQM3 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4E0), }; +enum { + MX53_PIN_GPIO_19 = _MXC_BUILD_GPIO_PIN(3, 5, 1, 0x20, 0x348), + MX53_PIN_KEY_COL0 = _MXC_BUILD_GPIO_PIN(3, 6, 1, 0x24, 0x34C), + MX53_PIN_KEY_ROW0 = _MXC_BUILD_GPIO_PIN(3, 7, 1, 0x28, 0x350), + MX53_PIN_KEY_COL1 = _MXC_BUILD_GPIO_PIN(3, 8, 1, 0x2C, 0x354), + MX53_PIN_KEY_ROW1 = _MXC_BUILD_GPIO_PIN(3, 9, 1, 0x30, 0x358), + MX53_PIN_KEY_COL2 = _MXC_BUILD_GPIO_PIN(3, 10, 1, 0x34, 0x35C), + MX53_PIN_KEY_ROW2 = _MXC_BUILD_GPIO_PIN(3, 11, 1, 0x38, 0x360), + MX53_PIN_KEY_COL3 = _MXC_BUILD_GPIO_PIN(3, 12, 1, 0x3C, 0x364), + MX53_PIN_KEY_ROW3 = _MXC_BUILD_GPIO_PIN(3, 13, 1, 0x40, 0x368), + MX53_PIN_KEY_COL4 = _MXC_BUILD_GPIO_PIN(3, 14, 1, 0x44, 0x36C), + MX53_PIN_KEY_ROW4 = _MXC_BUILD_GPIO_PIN(3, 15, 1, 0x48, 0x370), + MX53_PIN_NVCC_KEYPAD = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x374), + MX53_PIN_DI0_DISP_CLK = _MXC_BUILD_GPIO_PIN(3, 16, 1, 0x4C, 0x378), + MX53_PIN_DI0_PIN15 = _MXC_BUILD_GPIO_PIN(3, 17, 1, 0x50, 0x37C), + MX53_PIN_DI0_PIN2 = _MXC_BUILD_GPIO_PIN(3, 18, 1, 0x54, 0x380), + MX53_PIN_DI0_PIN3 = _MXC_BUILD_GPIO_PIN(3, 19, 1, 0x58, 0x384), + MX53_PIN_DI0_PIN4 = _MXC_BUILD_GPIO_PIN(3, 20, 1, 0x5C, 0x388), + MX53_PIN_DISP0_DAT0 = _MXC_BUILD_GPIO_PIN(3, 21, 1, 0x60, 0x38C), + MX53_PIN_DISP0_DAT1 = _MXC_BUILD_GPIO_PIN(3, 22, 1, 0x64, 0x390), + MX53_PIN_DISP0_DAT2 = _MXC_BUILD_GPIO_PIN(3, 23, 1, 0x68, 0x394), + MX53_PIN_DISP0_DAT3 = _MXC_BUILD_GPIO_PIN(3, 24, 1, 0x6C, 0x398), + MX53_PIN_DISP0_DAT4 = _MXC_BUILD_GPIO_PIN(3, 25, 1, 0x70, 0x39C), + MX53_PIN_DISP0_DAT5 = _MXC_BUILD_GPIO_PIN(3, 26, 1, 0x74, 0x3A0), + MX53_PIN_DISP0_DAT6 = _MXC_BUILD_GPIO_PIN(3, 27, 1, 0x78, 0x3A4), + MX53_PIN_DISP0_DAT7 = _MXC_BUILD_GPIO_PIN(3, 28, 1, 0x7C, 0x3A8), + MX53_PIN_DISP0_DAT8 = _MXC_BUILD_GPIO_PIN(3, 29, 1, 0x80, 0x3AC), + MX53_PIN_DISP0_DAT9 = _MXC_BUILD_GPIO_PIN(3, 30, 1, 0x84, 0x3B0), + MX53_PIN_DISP0_DAT10 = _MXC_BUILD_GPIO_PIN(3, 31, 1, 0x88, 0x3B4), + MX53_PIN_DISP0_DAT11 = _MXC_BUILD_GPIO_PIN(4, 5, 1, 0x8C, 0x3B8), + MX53_PIN_DISP0_DAT12 = _MXC_BUILD_GPIO_PIN(4, 6, 1, 0x90, 0x3BC), + MX53_PIN_DISP0_DAT13 = _MXC_BUILD_GPIO_PIN(4, 7, 1, 0x94, 0x3C0), + MX53_PIN_DISP0_DAT14 = _MXC_BUILD_GPIO_PIN(4, 8, 1, 0x98, 0x3C4), + MX53_PIN_DISP0_DAT15 = _MXC_BUILD_GPIO_PIN(4, 9, 1, 0x9C, 0x3C8), + MX53_PIN_DISP0_DAT16 = _MXC_BUILD_GPIO_PIN(4, 10, 1, 0xA0, 0x3CC), + MX53_PIN_DISP0_DAT17 = _MXC_BUILD_GPIO_PIN(4, 11, 1, 0xA4, 0x3D0), + MX53_PIN_DISP0_DAT18 = _MXC_BUILD_GPIO_PIN(4, 12, 1, 0xA8, 0x3D4), + MX53_PIN_DISP0_DAT19 = _MXC_BUILD_GPIO_PIN(4, 13, 1, 0xAC, 0x3D8), + MX53_PIN_DISP0_DAT20 = _MXC_BUILD_GPIO_PIN(4, 14, 1, 0xB0, 0x3DC), + MX53_PIN_DISP0_DAT21 = _MXC_BUILD_GPIO_PIN(4, 15, 1, 0xB4, 0x3E0), + MX53_PIN_DISP0_DAT22 = _MXC_BUILD_GPIO_PIN(4, 16, 1, 0xB8, 0x3E4), + MX53_PIN_DISP0_DAT23 = _MXC_BUILD_GPIO_PIN(4, 17, 1, 0xBC, 0x3E8), + MX53_PIN_CSI0_PIXCLK = _MXC_BUILD_GPIO_PIN(4, 18, 1, 0xC0, 0x3EC), + MX53_PIN_CSI0_MCLK = _MXC_BUILD_GPIO_PIN(4, 19, 1, 0xC4, 0x3F0), + MX53_PIN_CSI0_DATA_EN = _MXC_BUILD_GPIO_PIN(4, 20, 1, 0xC8, 0x3F4), + MX53_PIN_CSI0_VSYNC = _MXC_BUILD_GPIO_PIN(4, 21, 1, 0xCC, 0x3F8), + MX53_PIN_CSI0_D4 = _MXC_BUILD_GPIO_PIN(4, 22, 1, 0xD0, 0x3FC), + MX53_PIN_CSI0_D5 = _MXC_BUILD_GPIO_PIN(4, 23, 1, 0xD4, 0x400), + MX53_PIN_CSI0_D6 = _MXC_BUILD_GPIO_PIN(4, 24, 1, 0xD8, 0x404), + MX53_PIN_CSI0_D7 = _MXC_BUILD_GPIO_PIN(4, 25, 1, 0xDC, 0x408), + MX53_PIN_CSI0_D8 = _MXC_BUILD_GPIO_PIN(4, 26, 1, 0xE0, 0x40C), + MX53_PIN_CSI0_D9 = _MXC_BUILD_GPIO_PIN(4, 27, 1, 0xE4, 0x410), + MX53_PIN_CSI0_D10 = _MXC_BUILD_GPIO_PIN(4, 28, 1, 0xE8, 0x414), + MX53_PIN_CSI0_D11 = _MXC_BUILD_GPIO_PIN(4, 29, 1, 0xEC, 0x418), + MX53_PIN_CSI0_D12 = _MXC_BUILD_GPIO_PIN(4, 30, 1, 0xF0, 0x41C), + MX53_PIN_CSI0_D13 = _MXC_BUILD_GPIO_PIN(4, 31, 1, 0xF4, 0x420), + MX53_PIN_CSI0_D14 = _MXC_BUILD_GPIO_PIN(5, 0, 1, 0xF8, 0x424), + MX53_PIN_CSI0_D15 = _MXC_BUILD_GPIO_PIN(5, 1, 1, 0xFC, 0x428), + MX53_PIN_CSI0_D16 = _MXC_BUILD_GPIO_PIN(5, 2, 1, 0x100, 0x42C), + MX53_PIN_CSI0_D17 = _MXC_BUILD_GPIO_PIN(5, 3, 1, 0x104, 0x430), + MX53_PIN_CSI0_D18 = _MXC_BUILD_GPIO_PIN(5, 4, 1, 0x108, 0x434), + MX53_PIN_CSI0_D19 = _MXC_BUILD_GPIO_PIN(5, 5, 1, 0x10C, 0x438), + MX53_PIN_NVCC_CSI0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x43C), + MX53_PIN_JTAG_TMS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x440), + MX53_PIN_JTAG_MOD = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x444), + MX53_PIN_JTAG_TRSTB = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x448), + MX53_PIN_JTAG_TDI = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x44C), + MX53_PIN_JTAG_TCK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x450), + MX53_PIN_JTAG_TDO = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x454), + MX53_PIN_EIM_A25 = _MXC_BUILD_GPIO_PIN(4, 2, 1, 0x110, 0x458), + MX53_PIN_EIM_EB2 = _MXC_BUILD_GPIO_PIN(1, 30, 1, 0x114, 0x45C), + MX53_PIN_EIM_D16 = _MXC_BUILD_GPIO_PIN(2, 16, 1, 0x118, 0x460), + MX53_PIN_EIM_D17 = _MXC_BUILD_GPIO_PIN(2, 17, 1, 0x11C, 0x464), + MX53_PIN_EIM_D18 = _MXC_BUILD_GPIO_PIN(2, 18, 1, 0x120, 0x468), + MX53_PIN_EIM_D19 = _MXC_BUILD_GPIO_PIN(2, 19, 1, 0x124, 0x46C), + MX53_PIN_EIM_D20 = _MXC_BUILD_GPIO_PIN(2, 20, 1, 0x128, 0x470), + MX53_PIN_EIM_D21 = _MXC_BUILD_GPIO_PIN(2, 21, 1, 0x12C, 0x474), + MX53_PIN_EIM_D22 = _MXC_BUILD_GPIO_PIN(2, 22, 1, 0x130, 0x478), + MX53_PIN_EIM_D23 = _MXC_BUILD_GPIO_PIN(2, 23, 1, 0x134, 0x47C), + MX53_PIN_EIM_EB3 = _MXC_BUILD_GPIO_PIN(1, 31, 1, 0x138, 0x480), + MX53_PIN_EIM_D24 = _MXC_BUILD_GPIO_PIN(2, 24, 1, 0x13C, 0x484), + MX53_PIN_EIM_D25 = _MXC_BUILD_GPIO_PIN(2, 25, 1, 0x140, 0x488), + MX53_PIN_EIM_D26 = _MXC_BUILD_GPIO_PIN(2, 26, 1, 0x144, 0x48C), + MX53_PIN_EIM_D27 = _MXC_BUILD_GPIO_PIN(2, 27, 1, 0x148, 0x490), + MX53_PIN_EIM_D28 = _MXC_BUILD_GPIO_PIN(2, 28, 1, 0x14C, 0x494), + MX53_PIN_EIM_D29 = _MXC_BUILD_GPIO_PIN(2, 29, 1, 0x150, 0x498), + MX53_PIN_EIM_D30 = _MXC_BUILD_GPIO_PIN(2, 30, 1, 0x154, 0x49C), + MX53_PIN_EIM_D31 = _MXC_BUILD_GPIO_PIN(2, 31, 1, 0x158, 0x4A0), + MX53_PIN_NVCC_EIM1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4A4), + MX53_PIN_EIM_A24 = _MXC_BUILD_GPIO_PIN(4, 4, 1, 0x15C, 0x4A8), + MX53_PIN_EIM_A23 = _MXC_BUILD_GPIO_PIN(5, 6, 1, 0x160, 0x4AC), + MX53_PIN_EIM_A22 = _MXC_BUILD_GPIO_PIN(1, 16, 1, 0x164, 0x4B0), + MX53_PIN_EIM_A21 = _MXC_BUILD_GPIO_PIN(1, 17, 1, 0x168, 0x4B4), + MX53_PIN_EIM_A20 = _MXC_BUILD_GPIO_PIN(1, 18, 1, 0x16C, 0x4B8), + MX53_PIN_EIM_A19 = _MXC_BUILD_GPIO_PIN(1, 19, 1, 0x170, 0x4BC), + MX53_PIN_EIM_A18 = _MXC_BUILD_GPIO_PIN(1, 20, 1, 0x174, 0x4C0), + MX53_PIN_EIM_A17 = _MXC_BUILD_GPIO_PIN(1, 21, 1, 0x178, 0x4C4), + MX53_PIN_EIM_A16 = _MXC_BUILD_GPIO_PIN(1, 22, 1, 0x17C, 0x4C8), + MX53_PIN_EIM_CS0 = _MXC_BUILD_GPIO_PIN(1, 23, 1, 0x180, 0x4CC), + MX53_PIN_EIM_CS1 = _MXC_BUILD_GPIO_PIN(1, 24, 1, 0x184, 0x4D0), + MX53_PIN_EIM_OE = _MXC_BUILD_GPIO_PIN(1, 25, 1, 0x188, 0x4D4), + MX53_PIN_EIM_RW = _MXC_BUILD_GPIO_PIN(1, 26, 1, 0x18C, 0x4D8), + MX53_PIN_EIM_LBA = _MXC_BUILD_GPIO_PIN(1, 27, 1, 0x190, 0x4DC), + MX53_PIN_NVCC_EIM4 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4E0), + MX53_PIN_EIM_EB0 = _MXC_BUILD_GPIO_PIN(1, 28, 1, 0x194, 0x4E4), + MX53_PIN_EIM_EB1 = _MXC_BUILD_GPIO_PIN(1, 29, 1, 0x198, 0x4E8), + MX53_PIN_EIM_DA0 = _MXC_BUILD_GPIO_PIN(2, 0, 1, 0x19C, 0x4EC), + MX53_PIN_EIM_DA1 = _MXC_BUILD_GPIO_PIN(2, 1, 1, 0x1A0, 0x4F0), + MX53_PIN_EIM_DA2 = _MXC_BUILD_GPIO_PIN(2, 2, 1, 0x1A4, 0x4F4), + MX53_PIN_EIM_DA3 = _MXC_BUILD_GPIO_PIN(2, 3, 1, 0x1A8, 0x4F8), + MX53_PIN_EIM_DA4 = _MXC_BUILD_GPIO_PIN(2, 4, 1, 0x1AC, 0x4FC), + MX53_PIN_EIM_DA5 = _MXC_BUILD_GPIO_PIN(2, 5, 1, 0x1B0, 0x500), + MX53_PIN_EIM_DA6 = _MXC_BUILD_GPIO_PIN(2, 6, 1, 0x1B4, 0x504), + MX53_PIN_EIM_DA7 = _MXC_BUILD_GPIO_PIN(2, 7, 1, 0x1B8, 0x508), + MX53_PIN_EIM_DA8 = _MXC_BUILD_GPIO_PIN(2, 8, 1, 0x1BC, 0x50C), + MX53_PIN_EIM_DA9 = _MXC_BUILD_GPIO_PIN(2, 9, 1, 0x1C0, 0x510), + MX53_PIN_EIM_DA10 = _MXC_BUILD_GPIO_PIN(2, 10, 1, 0x1C4, 0x514), + MX53_PIN_EIM_DA11 = _MXC_BUILD_GPIO_PIN(2, 11, 1, 0x1C8, 0x518), + MX53_PIN_EIM_DA12 = _MXC_BUILD_GPIO_PIN(2, 12, 1, 0x1CC, 0x51C), + MX53_PIN_EIM_DA13 = _MXC_BUILD_GPIO_PIN(2, 13, 1, 0x1D0, 0x520), + MX53_PIN_EIM_DA14 = _MXC_BUILD_GPIO_PIN(2, 14, 1, 0x1D4, 0x524), + MX53_PIN_EIM_DA15 = _MXC_BUILD_GPIO_PIN(2, 15, 1, 0x1D8, 0x528), + MX53_PIN_NANDF_WE_B = _MXC_BUILD_GPIO_PIN(5, 12, 1, 0x1DC, 0x52C), + MX53_PIN_NANDF_RE_B = _MXC_BUILD_GPIO_PIN(5, 13, 1, 0x1E0, 0x530), + MX53_PIN_EIM_WAIT = _MXC_BUILD_GPIO_PIN(4, 0, 1, 0x1E4, 0x534), + MX53_PIN_EIM_BCLK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x538), + MX53_PIN_NVCC_EIM7 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x53C), + MX53_PIN_LVDS1_TX3_P = _MXC_BUILD_GPIO_PIN(5, 22, 0, 0x1EC, NON_PAD_I), + MX53_PIN_LVDS1_TX2_P = _MXC_BUILD_GPIO_PIN(5, 24, 0, 0x1F0, NON_PAD_I), + MX53_PIN_LVDS1_CLK_P = _MXC_BUILD_GPIO_PIN(5, 26, 0, 0x1F4, NON_PAD_I), + MX53_PIN_LVDS1_TX1_P = _MXC_BUILD_GPIO_PIN(5, 28, 0, 0x1F8, NON_PAD_I), + MX53_PIN_LVDS1_TX0_P = _MXC_BUILD_GPIO_PIN(5, 30, 0, 0x1FC, NON_PAD_I), + MX53_PIN_LVDS0_TX3_P = _MXC_BUILD_GPIO_PIN(6, 22, 0, 0x200, NON_PAD_I), + MX53_PIN_LVDS0_CLK_P = _MXC_BUILD_GPIO_PIN(6, 24, 0, 0x204, NON_PAD_I), + MX53_PIN_LVDS0_TX2_P = _MXC_BUILD_GPIO_PIN(6, 26, 0, 0x208, NON_PAD_I), + MX53_PIN_LVDS0_TX1_P = _MXC_BUILD_GPIO_PIN(6, 28, 0, 0x20C, NON_PAD_I), + MX53_PIN_LVDS0_TX0_P = _MXC_BUILD_GPIO_PIN(6, 30, 0, 0x210, NON_PAD_I), + MX53_PIN_GPIO_10 = _MXC_BUILD_GPIO_PIN(3, 0, 0, 0x214, 0x540), + MX53_PIN_GPIO_11 = _MXC_BUILD_GPIO_PIN(3, 1, 0, 0x218, 0x544), + MX53_PIN_GPIO_12 = _MXC_BUILD_GPIO_PIN(3, 2, 0, 0x21C, 0x548), + MX53_PIN_GPIO_13 = _MXC_BUILD_GPIO_PIN(3, 3, 0, 0x220, 0x54C), + MX53_PIN_GPIO_14 = _MXC_BUILD_GPIO_PIN(3, 4, 0, 0x224, 0x550), + MX53_PIN_DRAM_DQM3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x554), + MX53_PIN_DRAM_SDQS3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x558), + MX53_PIN_DRAM_SDCKE1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x55C), + MX53_PIN_DRAM_DQM2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x560), + MX53_PIN_DRAM_SDODT1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x564), + MX53_PIN_DRAM_SDQS2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x568), + MX53_PIN_DRAM_RESET = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x56C), + MX53_PIN_DRAM_SDCLK1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x570), + MX53_PIN_DRAM_CAS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x574), + MX53_PIN_DRAM_SDCLK0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x578), + MX53_PIN_DRAM_SDQS0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x57C), + MX53_PIN_DRAM_SDODT0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x580), + MX53_PIN_DRAM_DQM0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x584), + MX53_PIN_DRAM_RAS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x588), + MX53_PIN_DRAM_SDCKE0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x58C), + MX53_PIN_DRAM_SDQS1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x590), + MX53_PIN_DRAM_DQM1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x594), + MX53_PIN_PMIC_ON_REQ = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x598), + MX53_PIN_PMIC_STBY_REQ = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x59C), + MX53_PIN_NANDF_CLE = _MXC_BUILD_GPIO_PIN(5, 7, 1, 0x228, 0x5A0), + MX53_PIN_NANDF_ALE = _MXC_BUILD_GPIO_PIN(5, 8 , 1, 0x22C, 0x5A4), + MX53_PIN_NANDF_WP_B = _MXC_BUILD_GPIO_PIN(5, 9, 1, 0x230, 0x5A8), + MX53_PIN_NANDF_RB0 = _MXC_BUILD_GPIO_PIN(5, 10, 1, 0x234, 0x5AC), + MX53_PIN_NANDF_CS0 = _MXC_BUILD_GPIO_PIN(5, 11, 1, 0x238, 0x5B0), + MX53_PIN_NANDF_CS1 = _MXC_BUILD_GPIO_PIN(5, 14, 1, 0x23C, 0x5B4), + MX53_PIN_NANDF_CS2 = _MXC_BUILD_GPIO_PIN(5, 15, 1, 0x240, 0x5B8), + MX53_PIN_NANDF_CS3 = _MXC_BUILD_GPIO_PIN(5, 16, 1, 0x244, 0x5BC), + MX53_PIN_NVCC_NANDF = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x5C0), + MX53_PIN_FEC_MDIO = _MXC_BUILD_GPIO_PIN(0, 22, 1, 0x248, 0x5C4), + MX53_PIN_FEC_REF_CLK = _MXC_BUILD_GPIO_PIN(0, 23, 1, 0x24C, 0x5C8), + MX53_PIN_FEC_RX_ER = _MXC_BUILD_GPIO_PIN(0, 24, 1, 0x250, 0x5CC), + MX53_PIN_FEC_CRS_DV = _MXC_BUILD_GPIO_PIN(0, 25, 1, 0x254, 0x5D0), + MX53_PIN_FEC_RXD1 = _MXC_BUILD_GPIO_PIN(0, 26, 1, 0x258, 0x5D4), + MX53_PIN_FEC_RXD0 = _MXC_BUILD_GPIO_PIN(0, 27, 1, 0x25C, 0x5D8), + MX53_PIN_FEC_TX_EN = _MXC_BUILD_GPIO_PIN(0, 28, 1, 0x260, 0x5DC), + MX53_PIN_FEC_TXD1 = _MXC_BUILD_GPIO_PIN(0, 29, 1, 0x264, 0x5E0), + MX53_PIN_FEC_TXD0 = _MXC_BUILD_GPIO_PIN(0, 30, 1, 0x268, 0x5E4), + MX53_PIN_FEC_MDC = _MXC_BUILD_GPIO_PIN(0, 31, 1, 0x26C, 0x5E8), + MX53_PIN_NVCC_FEC = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x5EC), + MX53_PIN_ATA_DIOW = _MXC_BUILD_GPIO_PIN(5, 17, 1, 0x270, 0x5F0), + MX53_PIN_ATA_DMACK = _MXC_BUILD_GPIO_PIN(5, 18, 1, 0x274, 0x5F4), + MX53_PIN_ATA_DMARQ = _MXC_BUILD_GPIO_PIN(6, 0, 1, 0x278, 0x5F8), + MX53_PIN_ATA_BUFFER_EN = _MXC_BUILD_GPIO_PIN(6, 1, 1, 0x27C, 0x5FC), + MX53_PIN_ATA_INTRQ = _MXC_BUILD_GPIO_PIN(6, 2, 1, 0x280, 0x600), + MX53_PIN_ATA_DIOR = _MXC_BUILD_GPIO_PIN(6, 3, 1, 0x284, 0x604), + MX53_PIN_ATA_RESET_B = _MXC_BUILD_GPIO_PIN(6, 4, 1, 0x288, 0x608), + MX53_PIN_ATA_IORDY = _MXC_BUILD_GPIO_PIN(6, 5, 1, 0x28C, 0x60C), + MX53_PIN_ATA_DA_0 = _MXC_BUILD_GPIO_PIN(6, 6, 1, 0x290, 0x610), + MX53_PIN_ATA_DA_1 = _MXC_BUILD_GPIO_PIN(6, 7, 1, 0x294, 0x614), + MX53_PIN_ATA_DA_2 = _MXC_BUILD_GPIO_PIN(6, 8, 1, 0x298, 0x618), + MX53_PIN_ATA_CS_0 = _MXC_BUILD_GPIO_PIN(6, 9, 1, 0x29C, 0x61C), + MX53_PIN_ATA_CS_1 = _MXC_BUILD_GPIO_PIN(6, 10, 1, 0x2A0, 0x620), + MX53_PIN_NVCC_ATA2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x624), + MX53_PIN_ATA_DATA0 = _MXC_BUILD_GPIO_PIN(1, 0, 1, 0x2A4, 0x628), + MX53_PIN_ATA_DATA1 = _MXC_BUILD_GPIO_PIN(1, 1, 1, 0x2A8, 0x62C), + MX53_PIN_ATA_DATA2 = _MXC_BUILD_GPIO_PIN(1, 2, 1, 0x2AC, 0x630), + MX53_PIN_ATA_DATA3 = _MXC_BUILD_GPIO_PIN(1, 3, 1, 0x2B0, 0x634), + MX53_PIN_ATA_DATA4 = _MXC_BUILD_GPIO_PIN(1, 4, 1, 0x2B4, 0x638), + MX53_PIN_ATA_DATA5 = _MXC_BUILD_GPIO_PIN(1, 5, 1, 0x2B8, 0x63C), + MX53_PIN_ATA_DATA6 = _MXC_BUILD_GPIO_PIN(1, 6, 1, 0x2BC, 0x640), + MX53_PIN_ATA_DATA7 = _MXC_BUILD_GPIO_PIN(1, 7, 1, 0x2C0, 0x644), + MX53_PIN_ATA_DATA8 = _MXC_BUILD_GPIO_PIN(1, 8, 1, 0x2C4, 0x648), + MX53_PIN_ATA_DATA9 = _MXC_BUILD_GPIO_PIN(1, 9, 1, 0x2C8, 0x64C), + MX53_PIN_ATA_DATA10 = _MXC_BUILD_GPIO_PIN(1, 10, 1, 0x2CC, 0x650), + MX53_PIN_ATA_DATA11 = _MXC_BUILD_GPIO_PIN(1, 11, 1, 0x2D0, 0x654), + MX53_PIN_ATA_DATA12 = _MXC_BUILD_GPIO_PIN(1, 12, 1, 0x2D4, 0x658), + MX53_PIN_ATA_DATA13 = _MXC_BUILD_GPIO_PIN(1, 13, 1, 0x2D8, 0x65C), + MX53_PIN_ATA_DATA14 = _MXC_BUILD_GPIO_PIN(1, 14, 1, 0x2DC, 0x660), + MX53_PIN_ATA_DATA15 = _MXC_BUILD_GPIO_PIN(1, 15, 1, 0x2E0, 0x664), + MX53_PIN_NVCC_ATA0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x668), + MX53_PIN_SD1_DATA0 = _MXC_BUILD_GPIO_PIN(0, 16, 1, 0x2E4, 0x66C), + MX53_PIN_SD1_DATA1 = _MXC_BUILD_GPIO_PIN(0, 17, 1, 0x2E8, 0x670), + MX53_PIN_SD1_CMD = _MXC_BUILD_GPIO_PIN(0, 18, 1, 0x2EC, 0x674), + MX53_PIN_SD1_DATA2 = _MXC_BUILD_GPIO_PIN(0, 19, 1, 0x2F0, 0x678), + MX53_PIN_SD1_CLK = _MXC_BUILD_GPIO_PIN(0, 20, 1, 0x2F4, 0x67C), + MX53_PIN_SD1_DATA3 = _MXC_BUILD_GPIO_PIN(0, 21, 1, 0x2F8, 0x680), + MX53_PIN_NVCC_SD1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x684), + MX53_PIN_SD2_CLK = _MXC_BUILD_GPIO_PIN(0, 10, 1, 0x2FC, 0x688), + MX53_PIN_SD2_CMD = _MXC_BUILD_GPIO_PIN(0, 11, 1, 0x300, 0x68C), + MX53_PIN_SD2_DATA3 = _MXC_BUILD_GPIO_PIN(0, 12, 1, 0x304, 0x690), + MX53_PIN_SD2_DATA2 = _MXC_BUILD_GPIO_PIN(0, 13, 1, 0x308, 0x694), + MX53_PIN_SD2_DATA1 = _MXC_BUILD_GPIO_PIN(0, 14, 1, 0x30C, 0x698), + MX53_PIN_SD2_DATA0 = _MXC_BUILD_GPIO_PIN(0, 15, 1, 0x310, 0x69C), + MX53_PIN_NVCC_SD2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6A0), + MX53_PIN_GPIO_0 = _MXC_BUILD_GPIO_PIN(0, 0, 1, 0x314, 0x6A4), + MX53_PIN_GPIO_1 = _MXC_BUILD_GPIO_PIN(0, 1, 1, 0x318, 0x6A8), + MX53_PIN_GPIO_9 = _MXC_BUILD_GPIO_PIN(0, 9, 1, 0x31C, 0x6AC), + MX53_PIN_GPIO_3 = _MXC_BUILD_GPIO_PIN(0, 3, 1, 0x320, 0x6B0), + MX53_PIN_GPIO_6 = _MXC_BUILD_GPIO_PIN(0, 6, 1, 0x324, 0x6B4), + MX53_PIN_GPIO_2 = _MXC_BUILD_GPIO_PIN(0, 2, 1, 0x328, 0x6B8), + MX53_PIN_GPIO_4 = _MXC_BUILD_GPIO_PIN(0, 4, 1, 0x32C, 0x6BC), + MX53_PIN_GPIO_5 = _MXC_BUILD_GPIO_PIN(0, 5, 1, 0x330, 0x6C0), + MX53_PIN_GPIO_7 = _MXC_BUILD_GPIO_PIN(0, 7, 1, 0x334, 0x6C4), + MX53_PIN_GPIO_8 = _MXC_BUILD_GPIO_PIN(0, 8, 1, 0x338, 0x6C8), + MX53_PIN_GPIO_16 = _MXC_BUILD_GPIO_PIN(6, 11, 1, 0x33C, 0x6CC), + MX53_PIN_GPIO_17 = _MXC_BUILD_GPIO_PIN(6, 12, 1, 0x340, 0x6D0), + MX53_PIN_GPIO_18 = _MXC_BUILD_GPIO_PIN(6, 13, 1, 0x344, 0x6D4), + MX53_PIN_NVCC_GPIO = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6D8), + MX53_PIN_POR_B = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6DC), + MX53_PIN_BOOT_MODE1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6E0), + MX53_PIN_RESET_IN_B = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6E4), + MX53_PIN_BOOT_MODE0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6E8), + MX53_PIN_TEST_MODE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6EC), + MX53_PIN_GRP_ADDDS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6F0), + MX53_PIN_GRP_DDRMODE_CTL = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6F4), + MX53_PIN_GRP_DDRPKE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6FC), + MX53_PIN_GRP_DDRPK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x708), + MX53_PIN_GRP_TERM_CTL3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x70C), + MX53_PIN_GRP_DDRHYS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x710), + MX53_PIN_GRP_DDRMODE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x714), + MX53_PIN_GRP_B0DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x718), + MX53_PIN_GRP_B1DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x71C), + MX53_PIN_GRP_CTLDS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x720), + MX53_PIN_GRP_DDR_TYPE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x724), + MX53_PIN_GRP_B2DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x728), + MX53_PIN_GRP_B3DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x72C), +}; +/* various IOMUX input select register index */ +typedef enum iomux_input_select { + MX51_AUDMUX_P4_INPUT_DA_AMX_SELECT_I = 0, + MX51_AUDMUX_P4_INPUT_DB_AMX_SELECT_I, + MX51_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUT, + MX51_AUDMUX_P4_INPUT_TXFS_AMX_SELECT_INPUT, + MX51_AUDMUX_P5_INPUT_DA_AMX_SELECT_INPUT, + MX51_AUDMUX_P5_INPUT_DB_AMX_SELECT_INPUT, + MX51_AUDMUX_P5_INPUT_RXCLK_AMX_SELECT_INPUT, + MX51_AUDMUX_P5_INPUT_RXFS_AMX_SELECT, + MX51_AUDMUX_P5_INPUT_TXCLK_AMX_SELECT_INPUT, + MX51_AUDMUX_P5_INPUT_TXFS_AMX_SELECT_INPUT, + MX51_AUDMUX_P6_INPUT_DA_AMX_SELECT_INPUT, + MX51_AUDMUX_P6_INPUT_DB_AMX_SELECT_INPUT, + MX51_AUDMUX_P6_INPUT_RXCLK_AMX_SELECT_INPUT, + MX51_AUDMUX_P6_INPUT_RXFS_AMX_SELECT_INPUT, + MX51_AUDMUX_P6_INPUT_TXCLK_AMX_SELECT_INPUT, + MX51_AUDMUX_P6_INPUT_TXFS_AMX_SELECT_INPUT, + MX51_CCM_IPP_DI_CLK_SELECT_INPUT, + /* TO2 */ + MX51_CCM_IPP_DI1_CLK_SELECT_INPUT, + MX51_CCM_PLL1_BYPASS_CLK_SELECT_INPUT, + MX51_CCM_PLL2_BYPASS_CLK_SELECT_INPUT, + MX51_CSPI_IPP_CSPI_CLK_IN_SELECT_INPUT, + MX51_CSPI_IPP_IND_MISO_SELECT_INPUT, + MX51_CSPI_IPP_IND_MOSI_SELECT_INPUT, + MX51_CSPI_IPP_IND_SS_B_1_SELECT_INPUT, + MX51_CSPI_IPP_IND_SS_B_2_SELECT_INPUT, + MX51_CSPI_IPP_IND_SS_B_3_SELECT_INPUT, + MX51_DPLLIP1_L1T_TOG_EN_SELECT_INPUT, + /* TO2 */ + MX51_ECSPI2_IPP_IND_SS_B_1_SELECT_INPUT, + MX51_ECSPI2_IPP_IND_SS_B_3_SELECT_INPUT, + MX51_EMI_IPP_IND_RDY_INT_SELECT_INPUT, + MX51_ESDHC3_IPP_DAT0_IN_SELECT_INPUT, + MX51_ESDHC3_IPP_DAT1_IN_SELECT_INPUT, + MX51_ESDHC3_IPP_DAT2_IN_SELECT_INPUT, + MX51_ESDHC3_IPP_DAT3_IN_SELECT_INPUT, + MX51_FEC_FEC_COL_SELECT_INPUT, + MX51_FEC_FEC_CRS_SELECT_INPUT, + MX51_FEC_FEC_MDI_SELECT_INPUT, + MX51_FEC_FEC_RDATA_0_SELECT_INPUT, + MX51_FEC_FEC_RDATA_1_SELECT_INPUT, + MX51_FEC_FEC_RDATA_2_SELECT_INPUT, + MX51_FEC_FEC_RDATA_3_SELECT_INPUT, + MX51_FEC_FEC_RX_CLK_SELECT_INPUT, + MX51_FEC_FEC_RX_DV_SELECT_INPUT, + MX51_FEC_FEC_RX_ER_SELECT_INPUT, + MX51_FEC_FEC_TX_CLK_SELECT_INPUT, + MX51_GPIO3_IPP_IND_G_IN_1_SELECT_INPUT, + MX51_GPIO3_IPP_IND_G_IN_2_SELECT_INPUT, + MX51_GPIO3_IPP_IND_G_IN_3_SELECT_INPUT, + MX51_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT, + MX51_GPIO3_IPP_IND_G_IN_5_SELECT_INPUT, + MX51_GPIO3_IPP_IND_G_IN_6_SELECT_INPUT, + MX51_GPIO3_IPP_IND_G_IN_7_SELECT_INPUT, + MX51_GPIO3_IPP_IND_G_IN_8_SELECT_INPUT, + /* TO2 */ + MX51_GPIO3_IPP_IND_G_IN_12_SELECT_INPUT, + MX51_HSC_MIPI_MIX_IPP_IND_SENS1_DATA_EN_SELECT_INPUT, + MX51_HSC_MIPI_MIX_IPP_IND_SENS2_DATA_EN_SELECT_INPUT, + /* TO2 */ + MX51_HSC_MIPI_MIX_PAR_VSYNC_SELECT_INPUT, + /* TO2 */ + MX51_HSC_MIPI_MIX_PAR_DI_WAIT_SELECT_INPUT, + MX51_HSC_MIPI_MIX_PAR_SISG_TRIG_SELECT_INPUT, + MX51_I2C1_IPP_SCL_IN_SELECT_INPUT, + MX51_I2C1_IPP_SDA_IN_SELECT_INPUT, + MX51_I2C2_IPP_SCL_IN_SELECT_INPUT, + MX51_I2C2_IPP_SDA_IN_SELECT_INPUT, + MX51_IPU_IPP_DI_0_IND_DISPB_SD_D_SELECT_INPUT, + MX51_IPU_IPP_DI_1_IND_DISPB_SD_D_SELECT_INPUT, + MX51_KPP_IPP_IND_COL_6_SELECT_INPUT, + MX51_KPP_IPP_IND_COL_7_SELECT_INPUT, + MX51_KPP_IPP_IND_ROW_4_SELECT_INPUT, + MX51_KPP_IPP_IND_ROW_5_SELECT_INPUT, + MX51_KPP_IPP_IND_ROW_6_SELECT_INPUT, + MX51_KPP_IPP_IND_ROW_7_SELECT_INPUT, + MX51_UART1_IPP_UART_RTS_B_SELECT_INPUT, + MX51_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, + MX51_UART2_IPP_UART_RTS_B_SELECT_INPUT, + MX51_UART2_IPP_UART_RXD_MUX_SELECT_INPUT, + MX51_UART3_IPP_UART_RTS_B_SELECT_INPUT, + MX51_UART3_IPP_UART_RXD_MUX_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_CLK_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_DATA_0_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_DATA_1_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_DATA_2_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_DATA_3_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_DATA_4_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_DATA_5_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_DATA_6_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_DATA_7_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_DIR_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_NXT_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_STP_SELECT_INPUT, + MX51PUT_NUM_MUX, + /* MX53 */ + MX53_AUDMUX_P4_INPUT_DA_AMX_SELECT_I = 0, + MX53_AUDMUX_P4_INPUT_DB_AMX_SELECT_I, + MX53_AUDMUX_P4_INPUT_RXCLK_AMX_SELECT_INPUT, + MX53_AUDMUX_P4_INPUT_RXFS_AMX_SELECT_INPUT, + MX53_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUT, + MX53_AUDMUX_P4_INPUT_TXFS_AMX_SELECT_INPUT, + MX53_AUDMUX_P5_INPUT_DA_AMX_SELECT_I, + MX53_AUDMUX_P5_INPUT_DB_AMX_SELECT_I, + MX53_AUDMUX_P5_INPUT_RXCLK_AMX_SELECT_INPUT, + MX53_AUDMUX_P5_INPUT_RXFS_AMX_SELECT_INPUT, + MX53_AUDMUX_P5_INPUT_TXCLK_AMX_SELECT_INPUT, + MX53_AUDMUX_P5_INPUT_TXFS_AMX_SELECT_INPUT, + MX53_CAN1_IPP_IND_CANRX_SELECT_INPUT, + MX53_CAN2_IPP_IND_CANRX_SELECT_INPUT, + MX53_CCM_IPP_ASRC_EXT_SELECT_INPUT, + MX53_CCM_IPP_DI1_CLK_SELECT_INPUT, + MX53_CCM_PLL1_BYPASS_CLK_SELECT_INPUT, + MX53_CCM_PLL2_BYPASS_CLK_SELECT_INPUT, + MX53_CCM_PLL3_BYPASS_CLK_SELECT_INPUT, + MX53_CCM_PLL4_BYPASS_CLK_SELECT_INPUT, + MX53_CSPI_IPP_CSPI_CLK_IN_SELECT_INPUT, + MX53_CSPI_IPP_IND_MISO_SELECT_INPUT, + MX53_CSPI_IPP_IND_MOSI_SELECT_INPUT, + MX53_CSPI_IPP_IND_SS_B_1_SELECT_INPUT, + MX53_CSPI_IPP_IND_SS_B_2_SELECT_INPUT, + MX53_CSPI_IPP_IND_SS_B_3_SELECT_INPUT, + MX53_CSPI_IPP_IND_SS_B_4_SELECT_INPUT, + MX53_ECSPI1_IPP_CSPI_CLK_IN_SELECT_INPUT, + MX53_ECSPI1_IPP_IND_MISO_SELECT_INPUT, + MX53_ECSPI1_IPP_IND_MOSI_SELECT_INPUT, + MX53_ECSPI1_IPP_IND_SS_B_1_SELECT_INPUT, + MX53_ECSPI1_IPP_IND_SS_B_2_SELECT_INPUT, + MX53_ECSPI1_IPP_IND_SS_B_3_SELECT_INPUT, + MX53_ECSPI1_IPP_IND_SS_B_4_SELECT_INPUT, + MX53_ECSPI2_IPP_CSPI_CLK_IN_SELECT_INPUT, + MX53_ECSPI2_IPP_IND_MISO_SELECT_INPUT, + MX53_ECSPI2_IPP_IND_MOSI_SELECT_INPUT, + MX53_ECSPI2_IPP_IND_SS_B_1_SELECT_INPUT, + MX53_ECSPI2_IPP_IND_SS_B_2_SELECT_INPUT, + MX53_ESAI1_IPP_IND_FSR_SELECT_INPUT, + MX53_ESAI1_IPP_IND_FST_SELECT_INPUT, + MX53_ESAI1_IPP_IND_HCKR_SELECT_INPUT, + MX53_ESAI1_IPP_IND_HCKT_SELECT_INPUT, + MX53_ESAI1_IPP_IND_SCKR_SELECT_INPUT, + MX53_ESAI1_IPP_IND_SCKT_SELECT_INPUT, + MX53_ESAI1_IPP_IND_SDO0_SELECT_INPUT, + MX53_ESAI1_IPP_IND_SDO1_SELECT_INPUT, + MX53_ESAI1_IPP_IND_SDO2_SDI3_SELECT_INPUT, + MX53_ESAI1_IPP_IND_SDO3_SDI2_SELECT_INPUT, + MX53_ESAI1_IPP_IND_SDO4_SDI1_SELECT_INPUT, + MX53_ESAI1_IPP_IND_SDO5_SDI0_SELECT_INPUT, + MX53_ESDHC1_IPP_WP_ON_SELECT_INPUT, + MX53_FEC_FEC_COL_SELECT_INPUT, + MX53_FEC_FEC_MDI_SELECT_INPUT, + MX53_FEC_FEC_RX_CLK_SELECT_INPUT, + MX53_FIRI_IPP_IND_RXD_SELECT_INPUT, + MX53_GPC_PMIC_RDY_SELECT_INPUT, + MX53_I2C1_IPP_SCL_IN_SELECT_INPUT, + MX53_I2C1_IPP_SDA_IN_SELECT_INPUT, + MX53_I2C2_IPP_SCL_IN_SELECT_INPUT, + MX53_I2C2_IPP_SDA_IN_SELECT_INPUT, + MX53_I2C3_IPP_SCL_IN_SELECT_INPUT, + MX53_I2C3_IPP_SDA_IN_SELECT_INPUT, + MX53_IPU_IPP_DI_0_IND_DISPB_SD_D_SELECT_INPUT, + MX53_IPU_IPP_DI_1_IND_DISPB_SD_D_SELECT_INPUT, + MX53_IPU_IPP_IND_SENS1_DATA_EN_SELECT_INPUT, + MX53_IPU_IPP_IND_SENS1_HSYNC_SELECT_INPUT, + MX53_IPU_IPP_IND_SENS1_VSYNC_SELECT_INPUT, + MX53_KPP_IPP_IND_COL_5_SELECT_INPUT, + MX53_KPP_IPP_IND_COL_6_SELECT_INPUT, + MX53_KPP_IPP_IND_COL_7_SELECT_INPUT, + MX53_KPP_IPP_IND_ROW_5_SELECT_INPUT, + MX53_KPP_IPP_IND_ROW_6_SELECT_INPUT, + MX53_KPP_IPP_IND_ROW_7_SELECT_INPUT, + MX53_MLB_MLBCLK_IN_SELECT_INPUT, + MX53_MLB_MLBDAT_IN_SELECT_INPUT, + MX53_MLB_MLBSIG_IN_SELECT_INPUT, + MX53_OWIRE_BATTERY_LINE_IN_SELECT_INPUT, + MX53_SDMA_EVENTS_14_SELECT_INPUT, + MX53_SDMA_EVENTS_15_SELECT_INPUT, + MX53_SPDIF_SPDIF_IN1_SELECT_INPUT, + MX53_UART1_IPP_UART_RTS_B_SELECT_INPUT, + MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, + MX53_UART2_IPP_UART_RTS_B_SELECT_INPUT, + MX53_UART2_IPP_UART_RXD_MUX_SELECT_INPUT, + MX53_UART3_IPP_UART_RTS_B_SELECT_INPUT, + MX53_UART3_IPP_UART_RXD_MUX_SELECT_INPUT, + MX53_UART4_IPP_UART_RTS_B_SELECT_INPUT, + MX53_UART4_IPP_UART_RXD_MUX_SELECT_INPUT, + MX53_UART5_IPP_UART_RTS_B_SELECT_INPUT, + MX53_UART5_IPP_UART_RXD_MUX_SELECT_INPUT, + MX53_USBOH3_IPP_IND_OTG_OC_SELECT_INPUT, + MX53_USBOH3_IPP_IND_UH1_OC_SELECT_INPUT, + MX53_USBOH3_IPP_IND_UH2_OC_SELECT_INPUT, +} iomux_input_select_t; + #endif /* __ASSEMBLY__ */ #endif /* __ASM_ARCH_MX5_MX5X_PINS_H__ */ diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h old mode 100644 new mode 100755 index b4e5738..3d6d390 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -24,8 +24,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/arch/imx-regs.h> - /* High Level Configuration Options */ #define CONFIG_MX51 /* in a mx51 */ @@ -37,6 +35,7 @@ #define CONFIG_L2_OFF +#include <asm/arch/imx-regs.h> /* * Disabled for now due to build problems under Debian and a significant * increase in the final file size: 144260 vs. 109536 Bytes. diff --git a/include/configs/vision2.h b/include/configs/vision2.h index a5c116b..4c8e7fa 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -24,11 +24,12 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/arch/imx-regs.h> #define CONFIG_MX51 /* in a mx51 */ #define CONFIG_L2_OFF +#include <asm/arch/imx-regs.h> + #define CONFIG_SYS_MX5_HCLK 24000000 #define CONFIG_SYS_MX5_CLK32 32768 #define CONFIG_DISPLAY_CPUINFO -- 1.7.0.4

8 33

[U-Boot] [PATCH] fsl_dma: fix support for 83xx DMA engine
by Ira W. Snyder 07 Jul '11

07 Jul '11

Commit 359ec4931944adb885882deb9b781e4095eabc94 broke support for the Freescale DMA engine on the 83xx parts. This is due to using registers which do not exist on 83xx. Remove the attribute register accesses from the 83xx build. Signed-off-by: Ira W. Snyder <iws(a)ovro.caltech.edu> Cc: York Sun <yorksun(a)freescale.com> Cc: Peter Tyser <ptyser(a)xes-inc.com> Cc: Kumar Gala <galak(a)kernel.crashing.org> --- drivers/dma/fsl_dma.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/drivers/dma/fsl_dma.c b/drivers/dma/fsl_dma.c index 09c18c1..30785ec 100644 --- a/drivers/dma/fsl_dma.c +++ b/drivers/dma/fsl_dma.c @@ -116,10 +116,12 @@ int dmacpy(phys_addr_t dest, phys_addr_t src, phys_size_t count) { out_dma32(&dma->dar, (u32) (dest & 0xFFFFFFFF)); out_dma32(&dma->sar, (u32) (src & 0xFFFFFFFF)); +#if !defined(CONFIG_MPC83xx) out_dma32(&dma->satr, in_dma32(&dma->satr) | (u32)((u64)src >> 32)); out_dma32(&dma->datr, in_dma32(&dma->datr) | (u32)((u64)dest >> 32)); +#endif out_dma32(&dma->bcr, xfer_size); dma_sync(); -- 1.7.3.4

2 2

[U-Boot] [PATCH 1/4 v3] musb: Use name based initialization for musb_config
by Ajay Kumar Gupta 06 Jul '11

06 Jul '11

Changed musb_config initialization for omap3.c, davinci.c and da8xx.c using name of structure fields. This would cause the uninitialized field to be null by default and thus would help in avoiding to init some flags required to be set only for a few selected platforms. CC: Remy Bohmer <linux(a)bohmer.net> Signed-off-by: Ajay Kumar Gupta <ajay.gupta(a)ti.com> --- No change from v2. drivers/usb/musb/da8xx.c | 6 +++--- drivers/usb/musb/davinci.c | 6 +++--- drivers/usb/musb/omap3.c | 6 +++--- 3 files changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 40bfe44..617d88e 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -27,9 +27,9 @@ /* MUSB platform configuration */ struct musb_config musb_cfg = { - (struct musb_regs *)DA8XX_USB_OTG_CORE_BASE, - DA8XX_USB_OTG_TIMEOUT, - 0 + .regs = (struct musb_regs *)DA8XX_USB_OTG_CORE_BASE, + .timeout = DA8XX_USB_OTG_TIMEOUT, + .musb_speed = 0, }; /* diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 8fbadc9..f56f2df 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -28,9 +28,9 @@ /* MUSB platform configuration */ struct musb_config musb_cfg = { - (struct musb_regs *)MENTOR_USB0_BASE, - DAVINCI_USB_TIMEOUT, - 0 + .regs = (struct musb_regs *)MENTOR_USB0_BASE, + .timeout = DAVINCI_USB_TIMEOUT, + .musb_speed = 0, }; /* MUSB module register overlay */ diff --git a/drivers/usb/musb/omap3.c b/drivers/usb/musb/omap3.c index 3bfd0a0..785629c 100644 --- a/drivers/usb/musb/omap3.c +++ b/drivers/usb/musb/omap3.c @@ -36,9 +36,9 @@ static int platform_needs_initialization = 1; struct musb_config musb_cfg = { - (struct musb_regs *)MENTOR_USB0_BASE, - OMAP3_USB_TIMEOUT, - 0 + .regs = (struct musb_regs *)MENTOR_USB0_BASE, + .timeout = OMAP3_USB_TIMEOUT, + .musb_speed = 0, }; /* -- 1.6.2.4

6 15

[U-Boot] [PATCH 1/2] powerpc/85xx: Specify hwconfig usage for USB controller
by Kumar Gala 01 Jul '11

01 Jul '11

From: Ramneek Mehresh <ramneek.mehresh(a)freescale.com> Specify hwconfig usage for USB mode and phy change Signed-off-by: Ramneek Mehresh <ramneek.mehresh(a)freescale.com> Signed-off-by: Kumar Gala <galak(a)kernel.crashing.org> --- doc/README.fsl-hwconfig | 26 ++++++++++++++++++++++++++ 1 files changed, 26 insertions(+), 0 deletions(-) diff --git a/doc/README.fsl-hwconfig b/doc/README.fsl-hwconfig index 03fea74..6889a70 100644 --- a/doc/README.fsl-hwconfig +++ b/doc/README.fsl-hwconfig @@ -19,3 +19,29 @@ audclk 'audclk:12' Select the 12.288MHz clock + +usb + Specific to boards have USB controller + + This option specifies the following for a USB controller: + + - which controller mode to use + - which USB PHY to use + + This is used by generic USB device-tree fixup function to update + modified values of phy type and controller mode. + + Also used for configuring multiple USB controllers such that + 'usbN' (where N is 1, 2, etc. refers to controller no.) + + 'phy_type' + Select USB phy type: 'utmi' OR 'ulpi' + + 'dr_mode' + Select USB controller mode: 'host', 'peripheral' OR 'otg' + + Examples: + usb1:dr_mode=host;usb2:dr_mode=peripheral' + + usb1:dr_mode=host,phy_type=utmi;usb2:dr_mode=host' + -- 1.7.2.3

1 4